aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq')
-rw-r--r--target/linux/lantiq/dts/amazonse.dtsi3
-rw-r--r--target/linux/lantiq/dts/ar9.dtsi6
-rw-r--r--target/linux/lantiq/dts/danube.dtsi2
-rw-r--r--target/linux/lantiq/dts/vr9.dtsi6
-rw-r--r--target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch10
-rw-r--r--target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch75
-rw-r--r--target/linux/lantiq/patches-4.4/0047-poweroff.patch2
-rw-r--r--target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch78
-rw-r--r--target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch99
-rw-r--r--target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch202
-rw-r--r--target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch6
11 files changed, 394 insertions, 95 deletions
diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi
index bce618fed8..2b8ad08140 100644
--- a/target/linux/lantiq/dts/amazonse.dtsi
+++ b/target/linux/lantiq/dts/amazonse.dtsi
@@ -122,11 +122,12 @@
};
ifxhcd@E101000 {
- compatible = "lantiq,ifxhcd-ase";
+ compatible = "lantiq,ase-usb", "lantiq,ifxhcd-ase";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <39>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
index 569f25f02c..2638a4b268 100644
--- a/target/linux/lantiq/dts/ar9.dtsi
+++ b/target/linux/lantiq/dts/ar9.dtsi
@@ -137,20 +137,22 @@
};
ifxhcd@E101000 {
- compatible = "lantiq,ifxhcd-arx100", "lantiq,ifxhcd-arx100-dwc2";
+ compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
+ dr_mode = "host";
status = "disabled";
};
ifxhcd@E106000 {
- compatible = "lantiq,ifxhcd-arx100-dwc2";
+ compatible = "lantiq,arx100-usb";
reg = <0xE106000 0x1000
0xE1E0000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
+ dr_mode = "host";
status = "disabled";
};
diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi
index f11787f975..83e85c36a5 100644
--- a/target/linux/lantiq/dts/danube.dtsi
+++ b/target/linux/lantiq/dts/danube.dtsi
@@ -143,7 +143,7 @@
};
ifxhcd@E101000 {
- compatible = "lantiq,ifxhcd-danube-dwc2", "lantiq,ifxhcd-danube";
+ compatible = "lantiq,danube-usb", "lantiq,ifxhcd-danube";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index 4810a91c5c..eff4944411 100644
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -177,19 +177,21 @@
ifxhcd@E101000 {
status = "disabled";
- compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
+ compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
+ dr_mode = "host";
};
ifxhcd@E106000 {
status = "disabled";
- compatible = "lantiq,ifxhcd-xrx200-dwc2";
+ compatible = "lantiq,xrx200-usb";
reg = <0xE106000 0x1000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
+ dr_mode = "host";
};
eth0: eth@E108000 {
diff --git a/target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch b/target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch
deleted file mode 100644
index bd42f38c0a..0000000000
--- a/target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -370,6 +370,7 @@ static int __init mips_reboot_setup(void
- panic("Failed to remap core memory");
-
- if (of_machine_is_compatible("lantiq,ar9") ||
-+ of_machine_is_compatible("lantiq,danube") ||
- of_machine_is_compatible("lantiq,vr9"))
- ltq_usb_init();
-
diff --git a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
deleted file mode 100644
index 68d5f3ff4d..0000000000
--- a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -145,6 +145,62 @@ static int __dwc2_lowlevel_hw_enable(str
- return ret;
- }
-
-+static const struct dwc2_core_params params_ltq = {
-+ .otg_cap = 2, /* non-HNP/non-SRP */
-+ .otg_ver = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .speed = -1,
-+ .enable_dynamic_fifo = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = 288, /* 288 DWORDs */
-+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
-+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
-+ .max_transfer_size = -1,
-+ .max_packet_count = 511,
-+ .host_channels = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .ts_dline = -1,
-+ .reload_ctl = -1,
-+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
-+ .uframe_sched = -1,
-+};
-+
-+static const struct dwc2_core_params params_danube = {
-+ .otg_cap = 2, /* non-HNP/non-SRP */
-+ .otg_ver = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .speed = -1,
-+ .enable_dynamic_fifo = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .ts_dline = -1,
-+ .reload_ctl = -1,
-+ .ahbcfg = -1,
-+ .uframe_sched = -1,
-+};
-+
- /**
- * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
- * @hsotg: The driver state
-@@ -310,6 +366,9 @@ static int dwc2_driver_remove(struct pla
- static const struct of_device_id dwc2_of_match_table[] = {
- { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
- { .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
-+ { .compatible = "lantiq,ifxhcd-danube-dwc2", .data = &params_danube },
-+ { .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
-+ { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
- { .compatible = "snps,dwc2", .data = NULL },
- { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
- {},
diff --git a/target/linux/lantiq/patches-4.4/0047-poweroff.patch b/target/linux/lantiq/patches-4.4/0047-poweroff.patch
index 88aed2ce96..54249bba52 100644
--- a/target/linux/lantiq/patches-4.4/0047-poweroff.patch
+++ b/target/linux/lantiq/patches-4.4/0047-poweroff.patch
@@ -13,7 +13,7 @@
static void ltq_usb_init(void)
{
/* Power for USB cores 1 & 2 */
-@@ -380,7 +374,6 @@ static int __init mips_reboot_setup(void
+@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void
_machine_restart = ltq_machine_restart;
_machine_halt = ltq_machine_halt;
diff --git a/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch b/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
new file mode 100644
index 0000000000..91d6ac92e7
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
@@ -0,0 +1,78 @@
+From 6c0c0951bbf8c2c216675fe277fba4c42aa0a2bf Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Antti=20Sepp=C3=A4l=C3=A4?= <a.seppala@gmail.com>
+Date: Sat, 27 Feb 2016 12:31:24 +0200
+Subject: [PATCH] usb: dwc2: Add support for Lantiq ARX and XRX SoCs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add support for Lantiq ARX and XRX SoC families to the dwc2 driver.
+
+Acked-by: John Youn <johnyoun@synopsys.com>
+Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
+Signed-off-by: Felipe Balbi <balbi@kernel.org>
+---
+ Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++
+ drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++
+ 2 files changed, 36 insertions(+)
+
+--- a/Documentation/devicetree/bindings/usb/dwc2.txt
++++ b/Documentation/devicetree/bindings/usb/dwc2.txt
+@@ -7,6 +7,8 @@ Required properties:
+ - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+ - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
+ - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
++ - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
++ - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+ - snps,dwc2: A generic DWC2 USB controller with default parameters.
+ - reg : Should contain 1 register range (address and length)
+ - interrupts : Should contain 1 interrupt
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -116,6 +116,37 @@ static const struct dwc2_core_params par
+ .hibernation = -1,
+ };
+
++static const struct dwc2_core_params params_ltq = {
++ .otg_cap = 2, /* non-HNP/non-SRP */
++ .otg_ver = -1,
++ .dma_enable = -1,
++ .dma_desc_enable = -1,
++ .speed = -1,
++ .enable_dynamic_fifo = -1,
++ .en_multiple_tx_fifo = -1,
++ .host_rx_fifo_size = 288, /* 288 DWORDs */
++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
++ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
++ .max_transfer_size = 65535,
++ .max_packet_count = 511,
++ .host_channels = -1,
++ .phy_type = -1,
++ .phy_utmi_width = -1,
++ .phy_ulpi_ddr = -1,
++ .phy_ulpi_ext_vbus = -1,
++ .i2c_enable = -1,
++ .ulpi_fs_ls = -1,
++ .host_support_fs_ls_low_power = -1,
++ .host_ls_low_power_phy_clk = -1,
++ .ts_dline = -1,
++ .reload_ctl = -1,
++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
++ GAHBCFG_HBSTLEN_SHIFT,
++ .uframe_sched = -1,
++ .external_id_pin_ctl = -1,
++ .hibernation = -1,
++};
++
+ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
+ {
+ struct platform_device *pdev = to_platform_device(hsotg->dev);
+@@ -310,6 +341,8 @@ static int dwc2_driver_remove(struct pla
+ static const struct of_device_id dwc2_of_match_table[] = {
+ { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+ { .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
++ { .compatible = "lantiq,arx100-usb", .data = &params_ltq },
++ { .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
+ { .compatible = "snps,dwc2", .data = NULL },
+ { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ {},
diff --git a/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
new file mode 100644
index 0000000000..1eda4cc4f1
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
@@ -0,0 +1,99 @@
+From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 6 Jan 2017 17:55:24 +0100
+Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs
+
+The size of the internal RAM of the DesignWare USB controller changed
+between the different Lantiq SoCs. We have the following sizes:
+
+Amazon + Danube: 8 KByte
+Amazon SE + arx100: 2 KByte
+xrx200 + xrx300: 2.5 KByte
+
+For Danube SoC we do not provide the params and let the driver decide
+to use sane defaults, for the Amazon SE and arx100 we use small fifos
+and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo.
+The auto detection of max_transfer_size and max_packet_count should
+work, so remove it.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 39 insertions(+), 7 deletions(-)
+
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -116,7 +116,7 @@ static const struct dwc2_core_params par
+ .hibernation = -1,
+ };
+
+-static const struct dwc2_core_params params_ltq = {
++static const struct dwc2_core_params params_ase = {
+ .otg_cap = 2, /* non-HNP/non-SRP */
+ .otg_ver = -1,
+ .dma_enable = -1,
+@@ -127,8 +127,8 @@ static const struct dwc2_core_params par
+ .host_rx_fifo_size = 288, /* 288 DWORDs */
+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */
+- .max_transfer_size = 65535,
+- .max_packet_count = 511,
++ .max_transfer_size = -1,
++ .max_packet_count = -1,
+ .host_channels = -1,
+ .phy_type = -1,
+ .phy_utmi_width = -1,
+@@ -140,8 +140,37 @@ static const struct dwc2_core_params par
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = -1,
+- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+- GAHBCFG_HBSTLEN_SHIFT,
++ .ahbcfg = -1,
++ .uframe_sched = -1,
++ .external_id_pin_ctl = -1,
++ .hibernation = -1,
++};
++
++static const struct dwc2_core_params params_xrx200 = {
++ .otg_cap = 2, /* non-HNP/non-SRP */
++ .otg_ver = -1,
++ .dma_enable = -1,
++ .dma_desc_enable = -1,
++ .speed = -1,
++ .enable_dynamic_fifo = -1,
++ .en_multiple_tx_fifo = -1,
++ .host_rx_fifo_size = 288, /* 288 DWORDs */
++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
++ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */
++ .max_transfer_size = -1,
++ .max_packet_count = -1,
++ .host_channels = -1,
++ .phy_type = -1,
++ .phy_utmi_width = -1,
++ .phy_ulpi_ddr = -1,
++ .phy_ulpi_ext_vbus = -1,
++ .i2c_enable = -1,
++ .ulpi_fs_ls = -1,
++ .host_support_fs_ls_low_power = -1,
++ .host_ls_low_power_phy_clk = -1,
++ .ts_dline = -1,
++ .reload_ctl = -1,
++ .ahbcfg = -1,
+ .uframe_sched = -1,
+ .external_id_pin_ctl = -1,
+ .hibernation = -1,
+@@ -341,8 +370,11 @@ static int dwc2_driver_remove(struct pla
+ static const struct of_device_id dwc2_of_match_table[] = {
+ { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+ { .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
+- { .compatible = "lantiq,arx100-usb", .data = &params_ltq },
+- { .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
++ { .compatible = "lantiq,danube-usb", .data = NULL },
++ { .compatible = "lantiq,ase-usb", .data = &params_ase },
++ { .compatible = "lantiq,arx100-usb", .data = &params_ase },
++ { .compatible = "lantiq,xrx200-usb", .data = &params_xrx200 },
++ { .compatible = "lantiq,xrx300-usb", .data = &params_xrx200 },
+ { .compatible = "snps,dwc2", .data = NULL },
+ { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ {},
diff --git a/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch
new file mode 100644
index 0000000000..acc23080f1
--- /dev/null
+++ b/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch
@@ -0,0 +1,202 @@
+From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 6 Jan 2017 17:40:12 +0100
+Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
+
+This adds code to initialize the USB controller and PHY also on Danube,
+Amazon SE and AR10. This code is based on the Vendor driver from
+different UGW versions and compared to the hardware documentation.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++----------
+ arch/mips/lantiq/xway/sysctrl.c | 20 +++++++
+ 2 files changed, 110 insertions(+), 30 deletions(-)
+
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -72,6 +72,8 @@
+ #define RCU_USBCFG_HDSEL_BIT BIT(11)
+ #define RCU_USBCFG_HOST_END_BIT BIT(10)
+ #define RCU_USBCFG_SLV_END_BIT BIT(9)
++#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17)
++
+
+ /* USB reset bits */
+ #define RCU_USBRESET 0x0010
+@@ -85,6 +87,8 @@
+
+ #define RCU_CFG1A 0x0038
+ #define RCU_CFG1B 0x003C
++#define RCU_CFG1_TX_PEE BIT(0)
++#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */
+
+ /* USB PMU devices */
+ #define PMU_AHBM BIT(15)
+@@ -306,38 +310,91 @@ static void ltq_usb_init(void)
+ /* Power for USB cores 1 & 2 */
+ ltq_pmu_enable(PMU_AHBM);
+ ltq_pmu_enable(PMU_USB0);
+- ltq_pmu_enable(PMU_USB1);
+
+- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
+- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
++ if (of_machine_is_compatible("lantiq,ar10") ||
++ of_machine_is_compatible("lantiq,grx390") ||
++ of_machine_is_compatible("lantiq,ar9") ||
++ of_machine_is_compatible("lantiq,vr9"))
++ ltq_pmu_enable(PMU_USB1);
++
++ if (of_machine_is_compatible("lantiq,vr9") ||
++ of_machine_is_compatible("lantiq,ar10")) {
++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE |
++ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE |
++ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B);
++ }
+
+ /* Enable USB PHY power for cores 1 & 2 */
+ ltq_pmu_enable(PMU_USB0_P);
+- ltq_pmu_enable(PMU_USB1_P);
++ if (of_machine_is_compatible("lantiq,ar10") ||
++ of_machine_is_compatible("lantiq,grx390") ||
++ of_machine_is_compatible("lantiq,ar9") ||
++ of_machine_is_compatible("lantiq,vr9"))
++ ltq_pmu_enable(PMU_USB1_P);
++
++ if (of_machine_is_compatible("lantiq,ase") ||
++ of_machine_is_compatible("lantiq,danube")) {
++ /* Configure cores to host mode */
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
++ RCU_USB1CFG);
++
++ /* Select DMA endianness (Host-endian: big-endian) */
++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
++ }
++
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ /* Configure cores to host mode */
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
++ RCU_USB1CFG);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
++ RCU_USB2CFG);
++
++ /* Select DMA endianness (Host-endian: big-endian) */
++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
++ }
++
++ if (of_machine_is_compatible("lantiq,vr9") ||
++ of_machine_is_compatible("lantiq,ar10")) {
++ /* Configure cores to host mode */
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
++ RCU_USB1CFG);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
++ RCU_USB2CFG);
++
++ /* Select DMA endianness (Host-endian: big-endian) */
++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
++ }
++
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ /* Hard reset USB state machines */
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
++ | USBRESET_BIT | BIT(28), RCU_USBRESET);
++ udelay(50 * 1000);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
++ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET);
++ } else {
++ /* Hard reset USB state machines */
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
++ udelay(50 * 1000);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
++ }
+
+- /* Configure cores to host mode */
+- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+- RCU_USB1CFG);
+- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+- RCU_USB2CFG);
+-
+- /* Select DMA endianness (Host-endian: big-endian) */
+- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
+- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+-
+- /* Hard reset USB state machines */
+- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
+- udelay(50 * 1000);
+- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
+-
+- /* Soft reset USB state machines */
+- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
+- udelay(50 * 1000);
+- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
++ if (of_machine_is_compatible("lantiq,vr9")) {
++ /* Soft reset USB state machines */
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
++ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
++ udelay(50 * 1000);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
++ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
++ }
+ }
+
+ static int __init mips_reboot_setup(void)
+@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void
+ if (!ltq_rcu_membase)
+ panic("Failed to remap core memory");
+
+- if (of_machine_is_compatible("lantiq,ar9") ||
+- of_machine_is_compatible("lantiq,vr9"))
++ if (of_machine_is_compatible("lantiq,danube") ||
++ of_machine_is_compatible("lantiq,ase") ||
++ of_machine_is_compatible("lantiq,ar9") ||
++ of_machine_is_compatible("lantiq,vr9") ||
++ of_machine_is_compatible("lantiq,ar10"))
+ ltq_usb_init();
+
+ if (of_machine_is_compatible("lantiq,vr9"))
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk)
+ pr_warn("deactivating PMU module failed!");
+ }
+
++static void usb_set_clock(void)
++{
++ unsigned int val = ltq_cgu_r32(ifccr);
++
++ if (of_machine_is_compatible("lantiq,ar10") ||
++ of_machine_is_compatible("lantiq,grx390")) {
++ val &= ~0x03; /* XTAL divided by 3 */
++ } else if (of_machine_is_compatible("lantiq,ar9") ||
++ of_machine_is_compatible("lantiq,vr9")) {
++ /* TODO: this depends on the XTAL frequency */
++ val |= 0x03; /* XTAL divided by 3 */
++ } else if (of_machine_is_compatible("lantiq,ase")) {
++ val |= 0x20; /* from XTAL */
++ } else if (of_machine_is_compatible("lantiq,danube")) {
++ val |= 0x30; /* 12 MHz, generated from 36 MHz */
++ }
++ ltq_cgu_w32(val, ifccr);
++}
++
+ /* the pci enable helper */
+ static int pci_enable(struct clk *clk)
+ {
+@@ -608,4 +627,5 @@ void __init ltq_soc_init(void)
+
+ if (of_machine_is_compatible("lantiq,vr9"))
+ xbar_fpi_burst_disable();
++ usb_set_clock();
+ }
diff --git a/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
index 227d1cf25a..e42aaf9c07 100644
--- a/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
+++ b/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -423,6 +423,20 @@ static void clkdev_add_clkout(void)
+@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void)
}
}
@@ -21,10 +21,10 @@
/* bring up all register ranges that we need for basic system control */
void __init ltq_soc_init(void)
{
-@@ -608,4 +622,6 @@ void __init ltq_soc_init(void)
-
+@@ -628,4 +642,6 @@ void __init ltq_soc_init(void)
if (of_machine_is_compatible("lantiq,vr9"))
xbar_fpi_burst_disable();
+ usb_set_clock();
+
+ set_phy_clock_source(np_cgu);
}