aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq')
-rw-r--r--target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0002-MIPS-lantiq-dtb-image-hack.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0004-MIPS-lantiq-add-atm-hack.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0005-MIPS-lantiq-add-reset-controller-api-support.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0006-MIPS-lantiq-reboot-gphy-on-restart.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0007-MIPS-lantiq-add-basic-tffs-driver.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0008-MIPS-lantiq-backport-old-timer-code.patch2
-rw-r--r--target/linux/lantiq/patches-3.14/0009-MIPS-lantiq-command-line-work-around.patch (renamed from target/linux/lantiq/patches-3.14/0030-MIPS-lantiq-command-line-work-around.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0010-MIPS-lantiq-export-soc-type.patch46
-rw-r--r--target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch46
-rw-r--r--target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch (renamed from target/linux/lantiq/patches-3.14/0009-pinctrl-lantiq-fix-up-pinmux.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0013-MTD-lantiq-xway-fix-invalid-operator.patch4
-rw-r--r--target/linux/lantiq/patches-3.14/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch4
-rw-r--r--target/linux/lantiq/patches-3.14/0015-MTD-lantiq-xway-remove-endless-loop.patch4
-rw-r--r--target/linux/lantiq/patches-3.14/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch4
-rw-r--r--target/linux/lantiq/patches-3.14/0017-MTD-xway-fix-nand-locking.patch4
-rw-r--r--target/linux/lantiq/patches-3.14/0018-MTD-nand-lots-of-xrx200-fixes.patch130
-rw-r--r--target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch (renamed from target/linux/lantiq/patches-3.14/0018-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch (renamed from target/linux/lantiq/patches-3.14/0012-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0021-MTD-lantiq-Makes-the-Lantiq-flash-driver-try-jedec-p.patch (renamed from target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Makes-the-Lantiq-flash-driver-try-jedec-p.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch41
-rw-r--r--target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch (renamed from target/linux/lantiq/patches-3.14/0020-NET-PHY-adds-driver-for-lantiq-PHY11G.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch (renamed from target/linux/lantiq/patches-3.14/0021-NET-lantiq-adds-PHY11G-firmware-blobs.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch (renamed from target/linux/lantiq/patches-3.14/0022-NET-MIPS-lantiq-adds-xrx200-net.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch (renamed from target/linux/lantiq/patches-3.14/0023-NET-multi-phy-support.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0027-NET-add-of_get_mac_address_mtd.patch (renamed from target/linux/lantiq/patches-3.14/0024-NET-add-of_get_mac_address_mtd.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch937
-rw-r--r--target/linux/lantiq/patches-3.14/0029-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch (renamed from target/linux/lantiq/patches-3.14/0025-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch (renamed from target/linux/lantiq/patches-3.14/0031-GPIO-add-named-gpio-exports.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch (renamed from target/linux/lantiq/patches-3.14/0026-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0032-USB-fix-roothub-for-IFXHCD.patch (renamed from target/linux/lantiq/patches-3.14/0027-USB-fix-roothub-for-IFXHCD.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0033-SPI-MIPS-lantiq-adds-spi-xway.patch (renamed from target/linux/lantiq/patches-3.14/0028-SPI-MIPS-lantiq-adds-spi-xway.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch (renamed from target/linux/lantiq/patches-3.14/0029-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch (renamed from target/linux/lantiq/patches-3.14/0010-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch)22
-rw-r--r--target/linux/lantiq/patches-3.14/0036-owrt-generic-dtb-image-hack.patch (renamed from target/linux/lantiq/patches-3.14/0011-owrt-generic-dtb-image-hack.patch)4
-rw-r--r--target/linux/lantiq/patches-3.14/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch79
-rw-r--r--target/linux/lantiq/patches-3.14/0101-mtd-split.patch200
38 files changed, 1545 insertions, 60 deletions
diff --git a/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch
index 9a9ac3611d..3b4ad037d0 100644
--- a/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch
+++ b/target/linux/lantiq/patches-3.14/0001-MIPS-lantiq-add-pcie-driver.patch
@@ -1,7 +1,7 @@
From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:12:28 +0200
-Subject: [PATCH 01/31] MIPS: lantiq: add pcie driver
+Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0002-MIPS-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-3.14/0002-MIPS-lantiq-dtb-image-hack.patch
index 0b23afe06b..ce6c637131 100644
--- a/target/linux/lantiq/patches-3.14/0002-MIPS-lantiq-dtb-image-hack.patch
+++ b/target/linux/lantiq/patches-3.14/0002-MIPS-lantiq-dtb-image-hack.patch
@@ -1,7 +1,7 @@
From 17348293f7f8103c97c8d2a6b0ef36eae06ec371 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 13 Mar 2013 09:36:16 +0100
-Subject: [PATCH 02/31] MIPS: lantiq: dtb image hack
+Subject: [PATCH 02/36] MIPS: lantiq: dtb image hack
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch b/target/linux/lantiq/patches-3.14/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
index 36a53f2bae..eb1e2004a1 100644
--- a/target/linux/lantiq/patches-3.14/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
+++ b/target/linux/lantiq/patches-3.14/0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
@@ -1,7 +1,7 @@
From 16e315864132b59749faff739230daf4cee9abbb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 13 Mar 2013 10:04:01 +0100
-Subject: [PATCH 03/31] MIPS: lantiq: handle vmmc memory reservation
+Subject: [PATCH 03/36] MIPS: lantiq: handle vmmc memory reservation
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-3.14/0004-MIPS-lantiq-add-atm-hack.patch
index f4262e53f9..a01967f9c7 100644
--- a/target/linux/lantiq/patches-3.14/0004-MIPS-lantiq-add-atm-hack.patch
+++ b/target/linux/lantiq/patches-3.14/0004-MIPS-lantiq-add-atm-hack.patch
@@ -1,7 +1,7 @@
From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 3 Aug 2012 10:27:25 +0200
-Subject: [PATCH 04/31] MIPS: lantiq: add atm hack
+Subject: [PATCH 04/36] MIPS: lantiq: add atm hack
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0005-MIPS-lantiq-add-reset-controller-api-support.patch b/target/linux/lantiq/patches-3.14/0005-MIPS-lantiq-add-reset-controller-api-support.patch
index 36f6410686..c4540c9306 100644
--- a/target/linux/lantiq/patches-3.14/0005-MIPS-lantiq-add-reset-controller-api-support.patch
+++ b/target/linux/lantiq/patches-3.14/0005-MIPS-lantiq-add-reset-controller-api-support.patch
@@ -1,7 +1,7 @@
From 223f1c46e109a8420765aee099a5d1dc4ab7ee98 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 3 Sep 2013 13:18:12 +0200
-Subject: [PATCH 05/31] MIPS: lantiq: add reset-controller api support
+Subject: [PATCH 05/36] MIPS: lantiq: add reset-controller api support
Add a reset-controller binding for the reset registers found on the lantiq
SoC.
diff --git a/target/linux/lantiq/patches-3.14/0006-MIPS-lantiq-reboot-gphy-on-restart.patch b/target/linux/lantiq/patches-3.14/0006-MIPS-lantiq-reboot-gphy-on-restart.patch
index 09a3b12b8c..42acac21f2 100644
--- a/target/linux/lantiq/patches-3.14/0006-MIPS-lantiq-reboot-gphy-on-restart.patch
+++ b/target/linux/lantiq/patches-3.14/0006-MIPS-lantiq-reboot-gphy-on-restart.patch
@@ -1,7 +1,7 @@
From f81979f4b297693ac70616feaa4a79bdcb11db35 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:55:57 +0200
-Subject: [PATCH 06/31] MIPS: lantiq: reboot gphy on restart
+Subject: [PATCH 06/36] MIPS: lantiq: reboot gphy on restart
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0007-MIPS-lantiq-add-basic-tffs-driver.patch b/target/linux/lantiq/patches-3.14/0007-MIPS-lantiq-add-basic-tffs-driver.patch
index a031b8e9a0..a41d48ed32 100644
--- a/target/linux/lantiq/patches-3.14/0007-MIPS-lantiq-add-basic-tffs-driver.patch
+++ b/target/linux/lantiq/patches-3.14/0007-MIPS-lantiq-add-basic-tffs-driver.patch
@@ -1,7 +1,7 @@
From d27ec8bb97db0f60d81ab255d51ac4e967362067 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:34:19 +0200
-Subject: [PATCH 07/31] MIPS: lantiq: add basic tffs driver
+Subject: [PATCH 07/36] MIPS: lantiq: add basic tffs driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-3.14/0008-MIPS-lantiq-backport-old-timer-code.patch
index bceda4c587..d946e560a4 100644
--- a/target/linux/lantiq/patches-3.14/0008-MIPS-lantiq-backport-old-timer-code.patch
+++ b/target/linux/lantiq/patches-3.14/0008-MIPS-lantiq-backport-old-timer-code.patch
@@ -1,7 +1,7 @@
From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:30:56 +0200
-Subject: [PATCH 08/31] MIPS: lantiq: backport old timer code
+Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0030-MIPS-lantiq-command-line-work-around.patch b/target/linux/lantiq/patches-3.14/0009-MIPS-lantiq-command-line-work-around.patch
index 77aee7ebeb..2536745095 100644
--- a/target/linux/lantiq/patches-3.14/0030-MIPS-lantiq-command-line-work-around.patch
+++ b/target/linux/lantiq/patches-3.14/0009-MIPS-lantiq-command-line-work-around.patch
@@ -1,7 +1,7 @@
-From 015e22a637fe6ab9f9d2d94d3be1b0b312d21b39 Mon Sep 17 00:00:00 2001
+From ed348924cd59ef0c8a4bc4e015e2b7e581a00fa8 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 12 Aug 2014 21:40:41 +0200
-Subject: [PATCH 30/31] MIPS: lantiq: command line work around
+Subject: [PATCH 09/36] MIPS: lantiq: command line work around
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0010-MIPS-lantiq-export-soc-type.patch b/target/linux/lantiq/patches-3.14/0010-MIPS-lantiq-export-soc-type.patch
new file mode 100644
index 0000000000..de1cd52873
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0010-MIPS-lantiq-export-soc-type.patch
@@ -0,0 +1,46 @@
+From 6804142b47f2634b0657e4dfcec7a34e982b6ddb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:29:21 +0200
+Subject: [PATCH 10/36] MIPS: lantiq: export soc type
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ arch/mips/include/asm/mach-lantiq/lantiq.h | 2 ++
+ arch/mips/lantiq/prom.c | 5 +++++
+ 2 files changed, 7 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index f196cce..4e5ae65 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -48,6 +48,8 @@ extern struct clk *clk_get_ppe(void);
+ extern unsigned char ltq_boot_select(void);
+ /* find out what caused the last cpu reset */
+ extern int ltq_reset_cause(void);
++/* find out the soc type */
++extern int ltq_soc_type(void);
+
+ #define IOPORT_RESOURCE_START 0x10000000
+ #define IOPORT_RESOURCE_END 0xffffffff
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 227feed..4c652c6 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -36,6 +36,11 @@ const char *get_system_type(void)
+ return soc_info.sys_type;
+ }
+
++int ltq_soc_type(void)
++{
++ return soc_info.type;
++}
++
+ void prom_free_prom_memory(void)
+ {
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch b/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
new file mode 100644
index 0000000000..36d03b19c9
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
@@ -0,0 +1,46 @@
+From 85f0df34dee96048515ef1e01d88524bd579f8e0 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:39:19 +0200
+Subject: [PATCH 11/36] lantiq: add support for xrx200 firmware depending on
+ soc type
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+---
+ arch/mips/lantiq/xway/xrx200_phy_fw.c | 18 +++++++++++++++++-
+ 1 file changed, 17 insertions(+), 1 deletion(-)
+
+diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
+index d4d9d31..3479b77 100644
+--- a/arch/mips/lantiq/xway/xrx200_phy_fw.c
++++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
+@@ -24,7 +24,23 @@ static dma_addr_t xway_gphy_load(struct platform_device *pdev)
+ void *fw_addr;
+ size_t size;
+
+- if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
++ if (of_get_property(pdev->dev.of_node, "firmware1", NULL) || of_get_property(pdev->dev.of_node, "firmware2", NULL)) {
++ switch(ltq_soc_type()) {
++ case SOC_TYPE_VR9:
++ if (of_property_read_string(pdev->dev.of_node, "firmware1", &fw_name)) {
++ dev_err(&pdev->dev, "failed to load firmware filename\n");
++ return 0;
++ }
++ break;
++ case SOC_TYPE_VR9_2:
++ if (of_property_read_string(pdev->dev.of_node, "firmware2", &fw_name)) {
++ dev_err(&pdev->dev, "failed to load firmware filename\n");
++ return 0;
++ }
++ break;
++ }
++ }
++ else if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
+ dev_err(&pdev->dev, "failed to load firmware filename\n");
+ return 0;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.14/0009-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch
index 267c89860c..9b45bf7913 100644
--- a/target/linux/lantiq/patches-3.14/0009-pinctrl-lantiq-fix-up-pinmux.patch
+++ b/target/linux/lantiq/patches-3.14/0012-pinctrl-lantiq-fix-up-pinmux.patch
@@ -1,7 +1,7 @@
-From 29452de974f2cdc87876dbdc18a16405ef80c05f Mon Sep 17 00:00:00 2001
+From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 9 Aug 2013 20:38:15 +0200
-Subject: [PATCH 09/31] pinctrl/lantiq: fix up pinmux
+Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux
We found out how to set the gphy led pinmuxing.
diff --git a/target/linux/lantiq/patches-3.14/0013-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-3.14/0013-MTD-lantiq-xway-fix-invalid-operator.patch
index 5aad493a50..7d900fac79 100644
--- a/target/linux/lantiq/patches-3.14/0013-MTD-lantiq-xway-fix-invalid-operator.patch
+++ b/target/linux/lantiq/patches-3.14/0013-MTD-lantiq-xway-fix-invalid-operator.patch
@@ -1,7 +1,7 @@
-From c243da18ea2a02e8cfb3f821232783376131948a Mon Sep 17 00:00:00 2001
+From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:03:54 +0200
-Subject: [PATCH 13/31] MTD: lantiq: xway: fix invalid operator
+Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator
xway_read_byte should use a logic or and not an add operator when working out
the nand address.
diff --git a/target/linux/lantiq/patches-3.14/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-3.14/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
index a8b5c749fb..d3c197ef7e 100644
--- a/target/linux/lantiq/patches-3.14/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
+++ b/target/linux/lantiq/patches-3.14/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
@@ -1,7 +1,7 @@
-From b2ef79004dd8e26f3a4625610bff5362b70e956b Mon Sep 17 00:00:00 2001
+From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:06:39 +0200
-Subject: [PATCH 14/31] MTD: lantiq: xway: the latched command should be
+Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be
persistent
Signed-off-by: John Crispin <blogic@openwrt.org>
diff --git a/target/linux/lantiq/patches-3.14/0015-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-3.14/0015-MTD-lantiq-xway-remove-endless-loop.patch
index 51c8dd3c63..910fc148ff 100644
--- a/target/linux/lantiq/patches-3.14/0015-MTD-lantiq-xway-remove-endless-loop.patch
+++ b/target/linux/lantiq/patches-3.14/0015-MTD-lantiq-xway-remove-endless-loop.patch
@@ -1,7 +1,7 @@
-From 836c433cec22555d81bf02bb205dee5772b8df08 Mon Sep 17 00:00:00 2001
+From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:02:06 +0200
-Subject: [PATCH 15/31] MTD: lantiq: xway: remove endless loop
+Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop
The reset loop logic could run into a endless loop. Lets fix it as requested.
diff --git a/target/linux/lantiq/patches-3.14/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-3.14/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
index e00dc47941..8d07654d47 100644
--- a/target/linux/lantiq/patches-3.14/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
+++ b/target/linux/lantiq/patches-3.14/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
@@ -1,7 +1,7 @@
-From 6f5bf300afa3c6f41a973fb3f39827db59512343 Mon Sep 17 00:00:00 2001
+From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 17:59:51 +0200
-Subject: [PATCH 16/31] MTD: lantiq: xway: add missing write_buf and read_buf
+Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf
to nand driver
Signed-off-by: John Crispin <blogic@openwrt.org>
diff --git a/target/linux/lantiq/patches-3.14/0017-MTD-xway-fix-nand-locking.patch b/target/linux/lantiq/patches-3.14/0017-MTD-xway-fix-nand-locking.patch
index 9f87586d34..882a405f0a 100644
--- a/target/linux/lantiq/patches-3.14/0017-MTD-xway-fix-nand-locking.patch
+++ b/target/linux/lantiq/patches-3.14/0017-MTD-xway-fix-nand-locking.patch
@@ -1,7 +1,7 @@
-From bbaf5aaf4b430f2139e5f561b6372008d26766a2 Mon Sep 17 00:00:00 2001
+From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:55:31 +0200
-Subject: [PATCH 17/31] MTD: xway: fix nand locking
+Subject: [PATCH 17/36] MTD: xway: fix nand locking
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-3.14/0018-MTD-nand-lots-of-xrx200-fixes.patch
new file mode 100644
index 0000000000..1e1f299766
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0018-MTD-nand-lots-of-xrx200-fixes.patch
@@ -0,0 +1,130 @@
+From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 9 Sep 2014 23:12:15 +0200
+Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 63 insertions(+)
+
+diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
+index e430f2d..fedf2c4 100644
+--- a/drivers/mtd/nand/xway_nand.c
++++ b/drivers/mtd/nand/xway_nand.c
+@@ -54,8 +54,27 @@
+ #define NAND_CON_CSMUX (1 << 1)
+ #define NAND_CON_NANDM 1
+
++#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr))
++#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400)
++#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080)
++
+ static u32 xway_latchcmd;
+
++/*
++ * req_mask provides a mechanism to prevent interference between
++ * nand and pci (probably only relevant for the BT Home Hub 2B).
++ * Setting it causes the corresponding pci req pins to be masked
++ * during nand access, and also moves ebu locking from the read/write
++ * functions to the chip select function to ensure that the whole
++ * operation runs with interrupts disabled.
++ * In addition it switches on some extra waiting in xway_cmd_ctrl().
++ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled,
++ * which in turn seems to be necessary for the nor chip to be recognised
++ * reliably, on a board (Home Hub 2B again) which has both nor and nand.
++ */
++
++static __be32 req_mask = 0;
++
+ static void xway_reset_chip(struct nand_chip *chip)
+ {
+ unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_info *mtd, int chip)
+ case -1:
+ ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+ ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
++
++ if (req_mask) {
++ /* Unmask all external PCI request */
++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16);
++ }
+ spin_unlock_irqrestore(&ebu_lock, csflags);
++
+ break;
+ case 0:
+ spin_lock_irqsave(&ebu_lock, csflags);
++ if (req_mask) {
++ /* Mask all external PCI request */
++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16);
++ }
++
+ ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+ ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
++
+ break;
+ default:
+ BUG();
+@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+
++ if (req_mask) {
++ if (cmd != NAND_CMD_STATUS)
++ ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */
++ }
++
++
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ xway_latchcmd = NAND_WRITE_CMD;
+@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ ;
+ }
++
++ if (req_mask) {
++ /*
++ * program and erase have their own busy handlers
++ * status and sequential in needs no delay
++ */
++ switch (cmd) {
++ case NAND_CMD_ERASE1:
++ case NAND_CMD_SEQIN:
++ case NAND_CMD_STATUS:
++ case NAND_CMD_READID:
++ return;
++ }
++
++ /* wait until command is processed */
++ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0)
++ ;
++ }
+ }
+
+ static int xway_dev_ready(struct mtd_info *mtd)
+@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platform_device *pdev)
+ {
+ struct nand_chip *this = platform_get_drvdata(pdev);
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
++ const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node,
++ "req-mask", NULL);
+ const __be32 *cs = of_get_property(pdev->dev.of_node,
+ "lantiq,cs", NULL);
+ u32 cs_flag = 0;
+@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platform_device *pdev)
+ if (cs && (*cs == 1))
+ cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+
++ /*
++ * Load the PCI req lines to mask from the device tree. If the
++ * property is not present, setting req_mask to 0 disables masking.
++ */
++ req_mask = (req_mask_ptr ? *req_mask_ptr : 0);
++
+ /* setup the EBU to run in NAND mode on our base addr */
+ ltq_ebu_w32(CPHYSADDR(nandaddr)
+ | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.14/0018-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch b/target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
index bfe5523299..ad1c2cf540 100644
--- a/target/linux/lantiq/patches-3.14/0018-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
+++ b/target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Add-NAND-support-on-Lantiq-Falcon-SoC.patch
@@ -1,7 +1,7 @@
-From e2c285e95e75258c196fbc04a742d91be6d00f49 Mon Sep 17 00:00:00 2001
+From c21eed4418956ecc95966a2e174d47f58397071a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 30 Jan 2013 21:12:47 +0100
-Subject: [PATCH 18/31] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
+Subject: [PATCH 19/36] MTD: lantiq: Add NAND support on Lantiq Falcon SoC.
The driver uses plat_nand. As the platform_device is loaded from DT, we need
to lookup the node and attach our falcon specific "struct platform_nand_data"
diff --git a/target/linux/lantiq/patches-3.14/0012-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-3.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
index 432fa6b93e..4a2317030c 100644
--- a/target/linux/lantiq/patches-3.14/0012-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ b/target/linux/lantiq/patches-3.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@@ -1,7 +1,7 @@
-From 6c476b89f3d685b41f2e216698fc8c90ddb11dfd Mon Sep 17 00:00:00 2001
+From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:18:00 +0200
-Subject: [PATCH 12/31] MTD: lantiq: handle NO_XIP on cfi0001 flash
+Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Makes-the-Lantiq-flash-driver-try-jedec-p.patch b/target/linux/lantiq/patches-3.14/0021-MTD-lantiq-Makes-the-Lantiq-flash-driver-try-jedec-p.patch
index 4f36270aa7..00a2c8e1d3 100644
--- a/target/linux/lantiq/patches-3.14/0019-MTD-lantiq-Makes-the-Lantiq-flash-driver-try-jedec-p.patch
+++ b/target/linux/lantiq/patches-3.14/0021-MTD-lantiq-Makes-the-Lantiq-flash-driver-try-jedec-p.patch
@@ -1,7 +1,7 @@
-From 4e2a4dcadb70985e86d9cebfca308891be377510 Mon Sep 17 00:00:00 2001
+From 11180582ca6efdff86314ae4514e9df3d34a6475 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:57:30 +0200
-Subject: [PATCH 19/31] MTD: lantiq: Makes the Lantiq flash driver try jedec
+Subject: [PATCH 21/36] MTD: lantiq: Makes the Lantiq flash driver try jedec
probing if cfi probing fails.
(Based on work by Simon Hayes first published on www.psidoc.com and
diff --git a/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
new file mode 100644
index 0000000000..44970a5466
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch
@@ -0,0 +1,41 @@
+From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Sep 2014 22:40:18 +0200
+Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF
+
+In accordance with the physmap flash we should honour the linux,mtd-name
+property when deciding what name the mtd device has.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/devices/m25p80.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index ad19139..9f7b35a 100644
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1097,6 +1097,10 @@ static int m25p_probe(struct spi_device *spi)
+ struct mtd_part_parser_data ppdata;
+ struct device_node *np = spi->dev.of_node;
+ int ret;
++ const char __maybe_unused *of_mtd_name = NULL;
++
++ of_property_read_string(spi->dev.of_node,
++ "linux,mtd-name", &of_mtd_name);
+
+ /* Platform data helps sort out which chip type we have, as
+ * well as how this board partitions it. If we don't have
+@@ -1169,6 +1173,8 @@ static int m25p_probe(struct spi_device *spi)
+
+ if (data && data->name)
+ flash->mtd.name = data->name;
++ else if (of_mtd_name)
++ flash->mtd.name = of_mtd_name;
+ else
+ flash->mtd.name = dev_name(&spi->dev);
+
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.14/0020-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
index 5d9d82bffa..bd769e7ff7 100644
--- a/target/linux/lantiq/patches-3.14/0020-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ b/target/linux/lantiq/patches-3.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -1,7 +1,7 @@
-From 6c895c9b0ceff79fdeb73876e35b536a312f851b Mon Sep 17 00:00:00 2001
+From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:15:36 +0200
-Subject: [PATCH 20/31] NET: PHY: adds driver for lantiq PHY11G
+Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0021-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-3.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
index 1de297fe14..e4c221c5bb 100644
--- a/target/linux/lantiq/patches-3.14/0021-NET-lantiq-adds-PHY11G-firmware-blobs.patch
+++ b/target/linux/lantiq/patches-3.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
@@ -1,7 +1,7 @@
-From c64015eb950202f84829498a9c9daf949eded81f Mon Sep 17 00:00:00 2001
+From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Oct 2012 09:26:24 +0200
-Subject: [PATCH 21/31] NET: lantiq: adds PHY11G firmware blobs
+Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0022-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-3.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
index e47a519f3a..705430ea72 100644
--- a/target/linux/lantiq/patches-3.14/0022-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ b/target/linux/lantiq/patches-3.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
@@ -1,7 +1,7 @@
-From 96f50ccba9258367e5c3a48fe6295572daac69d3 Mon Sep 17 00:00:00 2001
+From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 22/31] NET: MIPS: lantiq: adds xrx200-net
+Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
---
drivers/net/ethernet/Kconfig | 8 +-
diff --git a/target/linux/lantiq/patches-3.14/0023-NET-multi-phy-support.patch b/target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch
index dcda21f487..9ffc6805a2 100644
--- a/target/linux/lantiq/patches-3.14/0023-NET-multi-phy-support.patch
+++ b/target/linux/lantiq/patches-3.14/0026-NET-multi-phy-support.patch
@@ -1,7 +1,7 @@
-From 2e265bc5154636daecf941acfea3087e7820877d Mon Sep 17 00:00:00 2001
+From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 23/31] NET: multi phy support
+Subject: [PATCH 26/36] NET: multi phy support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0024-NET-add-of_get_mac_address_mtd.patch b/target/linux/lantiq/patches-3.14/0027-NET-add-of_get_mac_address_mtd.patch
index 7024278374..53489ed5a6 100644
--- a/target/linux/lantiq/patches-3.14/0024-NET-add-of_get_mac_address_mtd.patch
+++ b/target/linux/lantiq/patches-3.14/0027-NET-add-of_get_mac_address_mtd.patch
@@ -1,7 +1,7 @@
-From c4f036afb2016d21433c0214c55c01b8b9b7f4ee Mon Sep 17 00:00:00 2001
+From f393898476aef3e4f49c27725c3d2dd70fca38fe Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:40:01 +0100
-Subject: [PATCH 24/31] NET: add of_get_mac_address_mtd()
+Subject: [PATCH 27/36] NET: add of_get_mac_address_mtd()
Many embedded devices have information such as mac addresses stored inside mtd
devices. This patch allows us to add a property inside a node describing a
diff --git a/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch
new file mode 100644
index 0000000000..1c8821c88a
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0028-NET-lantiq-various-etop-fixes.patch
@@ -0,0 +1,937 @@
+From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 9 Sep 2014 22:45:34 +0200
+Subject: [PATCH 28/36] NET: lantiq: various etop fixes
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++-----------
+ 1 file changed, 389 insertions(+), 166 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index fd4b6ae..1712382 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -11,7 +11,7 @@
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
+ */
+
+ #include <linux/kernel.h>
+@@ -30,11 +30,16 @@
+ #include <linux/mm.h>
+ #include <linux/platform_device.h>
+ #include <linux/ethtool.h>
++#include <linux/if_vlan.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/of_net.h>
++#include <linux/of_irq.h>
++#include <linux/of_platform.h>
+
+ #include <asm/checksum.h>
+
+@@ -42,7 +47,7 @@
+ #include <xway_dma.h>
+ #include <lantiq_platform.h>
+
+-#define LTQ_ETOP_MDIO 0x11804
++#define LTQ_ETOP_MDIO_ACC 0x11804
+ #define MDIO_REQUEST 0x80000000
+ #define MDIO_READ 0x40000000
+ #define MDIO_ADDR_MASK 0x1f
+@@ -51,44 +56,91 @@
+ #define MDIO_REG_OFFSET 0x10
+ #define MDIO_VAL_MASK 0xffff
+
+-#define PPE32_CGEN 0x800
+-#define LQ_PPE32_ENET_MAC_CFG 0x1840
++#define LTQ_ETOP_MDIO_CFG 0x11800
++#define MDIO_CFG_MASK 0x6
++
++#define LTQ_ETOP_CFG 0x11808
++#define LTQ_ETOP_IGPLEN 0x11820
++#define LTQ_ETOP_MAC_CFG 0x11840
+
+ #define LTQ_ETOP_ENETS0 0x11850
+ #define LTQ_ETOP_MAC_DA0 0x1186C
+ #define LTQ_ETOP_MAC_DA1 0x11870
+-#define LTQ_ETOP_CFG 0x16020
+-#define LTQ_ETOP_IGPLEN 0x16080
++
++#define MAC_CFG_MASK 0xfff
++#define MAC_CFG_CGEN (1 << 11)
++#define MAC_CFG_DUPLEX (1 << 2)
++#define MAC_CFG_SPEED (1 << 1)
++#define MAC_CFG_LINK (1 << 0)
+
+ #define MAX_DMA_CHAN 0x8
+ #define MAX_DMA_CRC_LEN 0x4
+ #define MAX_DMA_DATA_LEN 0x600
+
+ #define ETOP_FTCU BIT(28)
+-#define ETOP_MII_MASK 0xf
+-#define ETOP_MII_NORMAL 0xd
+-#define ETOP_MII_REVERSE 0xe
+ #define ETOP_PLEN_UNDER 0x40
+-#define ETOP_CGEN 0x800
+-
+-/* use 2 static channels for TX/RX */
+-#define LTQ_ETOP_TX_CHANNEL 1
+-#define LTQ_ETOP_RX_CHANNEL 6
+-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
+-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+-
++#define ETOP_CFG_MII0 0x01
++
++#define ETOP_CFG_MASK 0xfff
++#define ETOP_CFG_FEN0 (1 << 8)
++#define ETOP_CFG_SEN0 (1 << 6)
++#define ETOP_CFG_OFF1 (1 << 3)
++#define ETOP_CFG_REMII0 (1 << 1)
++#define ETOP_CFG_OFF0 (1 << 0)
++
++#define LTQ_GBIT_MDIO_CTL 0xCC
++#define LTQ_GBIT_MDIO_DATA 0xd0
++#define LTQ_GBIT_GCTL0 0x68
++#define LTQ_GBIT_PMAC_HD_CTL 0x8c
++#define LTQ_GBIT_P0_CTL 0x4
++#define LTQ_GBIT_PMAC_RX_IPG 0xa8
++#define LTQ_GBIT_RGMII_CTL 0x78
++
++#define PMAC_HD_CTL_AS (1 << 19)
++#define PMAC_HD_CTL_RXSH (1 << 22)
++
++/* Switch Enable (0=disable, 1=enable) */
++#define GCTL0_SE 0x80000000
++/* Disable MDIO auto polling (0=disable, 1=enable) */
++#define PX_CTL_DMDIO 0x00400000
++
++/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */
++#define MDC_CLOCK_MASK 0xff000000
++#define MDC_CLOCK_OFFSET 24
++
++/* register information for the gbit's MDIO bus */
++#define MDIO_XR9_REQUEST 0x00008000
++#define MDIO_XR9_READ 0x00000800
++#define MDIO_XR9_WRITE 0x00000400
++#define MDIO_XR9_REG_MASK 0x1f
++#define MDIO_XR9_ADDR_MASK 0x1f
++#define MDIO_XR9_RD_MASK 0xffff
++#define MDIO_XR9_REG_OFFSET 0
++#define MDIO_XR9_ADDR_OFFSET 5
++#define MDIO_XR9_WR_OFFSET 16
++
++#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \
++ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
++
++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
+ #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
+ #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
+ #define ltq_etop_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
+-#define DRV_VERSION "1.0"
++#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
++#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
++#define ltq_gbit_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
++
++#define DRV_VERSION "1.2"
+
+ static void __iomem *ltq_etop_membase;
++static void __iomem *ltq_gbit_membase;
+
+ struct ltq_etop_chan {
+- int idx;
+ int tx_free;
++ int irq;
+ struct net_device *netdev;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+@@ -98,22 +150,35 @@ struct ltq_etop_chan {
+ struct ltq_etop_priv {
+ struct net_device *netdev;
+ struct platform_device *pdev;
+- struct ltq_eth_data *pldata;
+ struct resource *res;
+
+ struct mii_bus *mii_bus;
+ struct phy_device *phydev;
+
+- struct ltq_etop_chan ch[MAX_DMA_CHAN];
+- int tx_free[MAX_DMA_CHAN >> 1];
++ struct ltq_etop_chan txch;
++ struct ltq_etop_chan rxch;
++
++ int tx_irq;
++ int rx_irq;
++
++ const void *mac;
++ int mii_mode;
+
+ spinlock_t lock;
++
++ struct clk *clk_ppe;
++ struct clk *clk_switch;
++ struct clk *clk_ephy;
++ struct clk *clk_ephycgu;
+ };
+
++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data);
++
+ static int
+ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+ {
+- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
++ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+ if (!ch->skb[ch->dma.desc])
+ return -ENOMEM;
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan *ch)
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ skb_put(skb, len);
++ skb->dev = ch->netdev;
+ skb->protocol = eth_type_trans(skb, ch->netdev);
+ netif_receive_skb(skb);
++ ch->netdev->stats.rx_packets++;
++ ch->netdev->stats.rx_bytes += len;
+ }
+
+ static int
+@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ {
+ struct ltq_etop_chan *ch = container_of(napi,
+ struct ltq_etop_chan, napi);
++ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ int rx = 0;
+ int complete = 0;
++ unsigned long flags;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ }
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ return rx;
+ }
+@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ container_of(napi, struct ltq_etop_chan, napi);
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ struct netdev_queue *txq =
+- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ while ((ch->dma.desc_base[ch->tx_free].ctl &
+ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ ch->netdev->stats.tx_packets++;
++ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len;
+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
+ ch->skb[ch->tx_free] = NULL;
+ memset(&ch->dma.desc_base[ch->tx_free], 0,
+@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ if (netif_tx_queue_stopped(txq))
+ netif_tx_start_queue(txq);
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ return 1;
+ }
+
+@@ -210,9 +286,10 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ struct ltq_etop_priv *priv = _priv;
+- int ch = irq - LTQ_DMA_CH0_INT;
+-
+- napi_schedule(&priv->ch[ch].napi);
++ if (irq == priv->txch.dma.irq)
++ napi_schedule(&priv->txch.napi);
++ else
++ napi_schedule(&priv->rxch.napi);
+ return IRQ_HANDLED;
+ }
+
+@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+ ltq_dma_free(&ch->dma);
+ if (ch->dma.irq)
+ free_irq(ch->dma.irq, priv);
+- if (IS_RX(ch->idx)) {
++ if (ch == &priv->txch) {
+ int desc;
+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+@@ -235,65 +312,133 @@ static void
+ ltq_etop_hw_exit(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
+
+- ltq_pmu_disable(PMU_PPE);
+- for (i = 0; i < MAX_DMA_CHAN; i++)
+- if (IS_TX(i) || IS_RX(i))
+- ltq_etop_free_channel(dev, &priv->ch[i]);
++ clk_disable(priv->clk_ppe);
++
++ if (of_machine_is_compatible("lantiq,ar9"))
++ clk_disable(priv->clk_switch);
++
++ if (of_machine_is_compatible("lantiq,ase")) {
++ clk_disable(priv->clk_ephy);
++ clk_disable(priv->clk_ephycgu);
++ }
++
++ ltq_etop_free_channel(dev, &priv->txch);
++ ltq_etop_free_channel(dev, &priv->rxch);
++}
++
++static void
++ltq_etop_gbit_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++
++ clk_enable(priv->clk_switch);
++
++ /* enable gbit port0 on the SoC */
++ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL);
++
++ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
++ /* disable MDIO auto polling mode */
++ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
++ /* set 1522 packet size */
++ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
++ /* disable pmac & dmac headers */
++ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
++ LTQ_GBIT_PMAC_HD_CTL);
++ /* Due to traffic halt when burst length 8,
++ replace default IPG value with 0x3B */
++ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
++ /* set mdc clock to 2.5 MHz */
++ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET,
++ LTQ_GBIT_RGMII_CTL);
+ }
+
+ static int
+ ltq_etop_hw_init(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ int mii_mode = priv->mii_mode;
++
++ clk_enable(priv->clk_ppe);
+
+- ltq_pmu_enable(PMU_PPE);
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ ltq_etop_gbit_init(dev);
++ /* force the etops link to the gbit to MII */
++ mii_mode = PHY_INTERFACE_MODE_MII;
++ }
++ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
++ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
++ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
+
+- switch (priv->pldata->mii_mode) {
++ switch (mii_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+- ltq_etop_w32_mask(ETOP_MII_MASK,
+- ETOP_MII_REVERSE, LTQ_ETOP_CFG);
++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 |
++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
+ break;
+
+ case PHY_INTERFACE_MODE_MII:
+- ltq_etop_w32_mask(ETOP_MII_MASK,
+- ETOP_MII_NORMAL, LTQ_ETOP_CFG);
++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 |
++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG);
+ break;
+
+ default:
++ if (of_machine_is_compatible("lantiq,ase")) {
++ clk_enable(priv->clk_ephy);
++ /* disable external MII */
++ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
++ /* enable clock for internal PHY */
++ clk_enable(priv->clk_ephycgu);
++ /* we need to write this magic to the internal phy to
++ make it work */
++ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
++ pr_info("Selected EPHY mode\n");
++ break;
++ }
+ netdev_err(dev, "unknown mii mode %d\n",
+- priv->pldata->mii_mode);
++ mii_mode);
+ return -ENOTSUPP;
+ }
+
+- /* enable crc generation */
+- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
++ return 0;
++}
++
++static int
++ltq_etop_dma_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++ int tx = priv->tx_irq - LTQ_DMA_ETOP;
++ int rx = priv->rx_irq - LTQ_DMA_ETOP;
++ int err;
+
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- int irq = LTQ_DMA_CH0_INT + i;
+- struct ltq_etop_chan *ch = &priv->ch[i];
+-
+- ch->idx = ch->dma.nr = i;
+-
+- if (IS_TX(i)) {
+- ltq_dma_alloc_tx(&ch->dma);
+- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
+- } else if (IS_RX(i)) {
+- ltq_dma_alloc_rx(&ch->dma);
+- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+- ch->dma.desc++)
+- if (ltq_etop_alloc_skb(ch))
+- return -ENOMEM;
+- ch->dma.desc = 0;
+- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
++ priv->txch.dma.nr = tx;
++ ltq_dma_alloc_tx(&priv->txch.dma);
++ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv);
++ if (err) {
++ netdev_err(dev, "failed to allocate tx irq\n");
++ goto err_out;
++ }
++ priv->txch.dma.irq = priv->tx_irq;
++
++ priv->rxch.dma.nr = rx;
++ ltq_dma_alloc_rx(&priv->rxch.dma);
++ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
++ priv->rxch.dma.desc++) {
++ if (ltq_etop_alloc_skb(&priv->rxch)) {
++ netdev_err(dev, "failed to allocate skbs\n");
++ err = -ENOMEM;
++ goto err_out;
+ }
+- ch->dma.irq = irq;
+ }
+- return 0;
++ priv->rxch.dma.desc = 0;
++ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv);
++ if (err)
++ netdev_err(dev, "failed to allocate rx irq\n");
++ else
++ priv->rxch.dma.irq = priv->rx_irq;
++err_out:
++ return err;
+ }
+
+ static void
+@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_gset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_gset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_sset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_sset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_start_aneg(priv->phydev);
++ if (priv->phydev)
++ return phy_start_aneg(priv->phydev);
++ else
++ return 0;
+ }
+
+ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+ };
+
+ static int
++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
++ (phy_data << MDIO_XR9_WR_OFFSET) |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ return 0;
++}
++
++static int
++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
++ return val;
++}
++
++static int
+ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ {
+ u32 val = MDIO_REQUEST |
+@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
+ phy_data;
+
+- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ ;
+- ltq_etop_w32(val, LTQ_ETOP_MDIO);
++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
+ return 0;
+ }
+
+@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, int phy_addr, int phy_reg)
+ ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
+ ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
+
+- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ ;
+- ltq_etop_w32(val, LTQ_ETOP_MDIO);
+- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST)
++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC);
++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST)
+ ;
+- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK;
++ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK;
+ return val;
+ }
+
+@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+- int phy_addr;
+-
+- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+- if (priv->mii_bus->phy_map[phy_addr]) {
+- phydev = priv->mii_bus->phy_map[phy_addr];
+- break;
+- }
+- }
++ u32 phy_supported = (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++
++ if (of_machine_is_compatible("lantiq,ase"))
++ phydev = priv->mii_bus->phy_map[8];
++ else
++ phydev = priv->mii_bus->phy_map[0];
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev),
+- &ltq_etop_mdio_link, priv->pldata->mii_mode);
++ &ltq_etop_mdio_link, priv->mii_mode);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+- phydev->supported &= (SUPPORTED_10baseT_Half
+- | SUPPORTED_10baseT_Full
+- | SUPPORTED_100baseT_Half
+- | SUPPORTED_100baseT_Full
+- | SUPPORTED_Autoneg
+- | SUPPORTED_MII
+- | SUPPORTED_TP);
++ if (of_machine_is_compatible("lantiq,ar9"))
++ phy_supported |= SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full;
+
++ phydev->supported &= phy_supported;
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *dev)
+ }
+
+ priv->mii_bus->priv = dev;
+- priv->mii_bus->read = ltq_etop_mdio_rd;
+- priv->mii_bus->write = ltq_etop_mdio_wr;
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
++ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
++ } else {
++ priv->mii_bus->read = ltq_etop_mdio_rd;
++ priv->mii_bus->write = ltq_etop_mdio_wr;
++ }
+ priv->mii_bus->name = "ltq_mii";
+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
+ priv->pdev->name, priv->pdev->id);
+@@ -480,17 +673,19 @@ static int
+ ltq_etop_open(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ napi_enable(&priv->txch.napi);
++ napi_enable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_open(&priv->txch.dma);
++ ltq_dma_open(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (priv->phydev)
++ phy_start(priv->phydev);
+
+- if (!IS_TX(i) && (!IS_RX(i)))
+- continue;
+- ltq_dma_open(&ch->dma);
+- napi_enable(&ch->napi);
+- }
+- phy_start(priv->phydev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+ }
+@@ -499,18 +694,19 @@ static int
+ ltq_etop_stop(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+ netif_tx_stop_all_queues(dev);
+- phy_stop(priv->phydev);
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ if (priv->phydev)
++ phy_stop(priv->phydev);
++ napi_disable(&priv->txch.napi);
++ napi_disable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_close(&priv->txch.dma);
++ ltq_dma_close(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (!IS_RX(i) && !IS_TX(i))
+- continue;
+- napi_disable(&ch->napi);
+- ltq_dma_close(&ch->dma);
+- }
+ return 0;
+ }
+
+@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ int queue = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+- int len;
++ struct ltq_dma_desc *desc =
++ &priv->txch.dma.desc_base[priv->txch.dma.desc];
+ unsigned long flags;
+ u32 byte_offset;
++ int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+- dev_kfree_skb_any(skb);
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
++ priv->txch.skb[priv->txch.dma.desc]) {
+ netdev_err(dev, "tx ring full\n");
+ netif_tx_stop_queue(txq);
+ return NETDEV_TX_BUSY;
+@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+- ch->skb[ch->dma.desc] = skb;
++ priv->txch.skb[priv->txch.dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+- ch->dma.desc++;
+- ch->dma.desc %= LTQ_DESC_NUM;
++ priv->txch.dma.desc++;
++ priv->txch.dma.desc %= LTQ_DESC_NUM;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
+ netif_tx_stop_queue(txq);
+
+ return NETDEV_TX_OK;
+@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *dev, int new_mtu)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned long flags;
+
++ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
++
+ spin_lock_irqsave(&priv->lock, flags);
+- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu,
++ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max,
+ LTQ_ETOP_IGPLEN);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+@@ -631,34 +829,33 @@ ltq_etop_init(struct net_device *dev)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct sockaddr mac;
+ int err;
+- bool random_mac = false;
+
+ ether_setup(dev);
+ dev->watchdog_timeo = 10 * HZ;
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
++
+ ltq_etop_change_mtu(dev, 1500);
+
+- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
++ if (priv->mac)
++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("etop: invalid MAC, using random\n");
+- eth_random_addr(mac.sa_data);
+- random_mac = true;
++ random_ether_addr(mac.sa_data);
+ }
+
+ err = ltq_etop_set_mac_address(dev, &mac);
+ if (err)
+ goto err_netdev;
+-
+- /* Set addr_assign_type here, ltq_etop_set_mac_address would reset it. */
+- if (random_mac)
+- dev->addr_assign_type = NET_ADDR_RANDOM;
+-
+ ltq_etop_set_multicast_list(dev);
+- err = ltq_etop_mdio_init(dev);
+- if (err)
+- goto err_netdev;
++ if (!ltq_etop_mdio_init(dev))
++ dev->ethtool_ops = &ltq_etop_ethtool_ops;
++ else
++ pr_warn("etop: mdio probe failed\n");;
+ return 0;
+
+ err_netdev:
+@@ -678,6 +875,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ return;
+@@ -701,14 +901,18 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+ .ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+
+-static int __init
+-ltq_etop_probe(struct platform_device *pdev)
++static int ltq_etop_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+- struct resource *res;
++ struct resource *res, *gbit_res, irqres[2];
+ int err;
+- int i;
++
++ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2);
++ if (err != 2) {
++ dev_err(&pdev->dev, "failed to get etop irqs\n");
++ return -EINVAL;
++ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+@@ -734,30 +938,58 @@ ltq_etop_probe(struct platform_device *pdev)
+ goto err_out;
+ }
+
+- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+- if (!dev) {
+- err = -ENOMEM;
+- goto err_out;
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!gbit_res) {
++ dev_err(&pdev->dev, "failed to get gbit resource\n");
++ err = -ENOENT;
++ goto err_out;
++ }
++ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
++ gbit_res->start, resource_size(gbit_res));
++ if (!ltq_gbit_membase) {
++ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
++ pdev->id);
++ err = -ENOMEM;
++ goto err_out;
++ }
+ }
++
++ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ strcpy(dev->name, "eth%d");
+ dev->netdev_ops = &ltq_eth_netdev_ops;
+- dev->ethtool_ops = &ltq_etop_ethtool_ops;
+ priv = netdev_priv(dev);
+ priv->res = res;
+ priv->pdev = pdev;
+- priv->pldata = dev_get_platdata(&pdev->dev);
+ priv->netdev = dev;
++ priv->tx_irq = irqres[0].start;
++ priv->rx_irq = irqres[1].start;
++ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
++ of_get_mac_address_mtd(pdev->dev.of_node, priv->mac);
++
++ priv->clk_ppe = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_ppe))
++ return PTR_ERR(priv->clk_ppe);
++ if (of_machine_is_compatible("lantiq,ar9")) {
++ priv->clk_switch = clk_get(&pdev->dev, "switch");
++ if (IS_ERR(priv->clk_switch))
++ return PTR_ERR(priv->clk_switch);
++ }
++ if (of_machine_is_compatible("lantiq,ase")) {
++ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
++ if (IS_ERR(priv->clk_ephy))
++ return PTR_ERR(priv->clk_ephy);
++ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
++ if (IS_ERR(priv->clk_ephycgu))
++ return PTR_ERR(priv->clk_ephycgu);
++ }
++
+ spin_lock_init(&priv->lock);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- if (IS_TX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_tx, 8);
+- else if (IS_RX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_rx, 32);
+- priv->ch[i].netdev = dev;
+- }
++ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
++ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
++ priv->txch.netdev = dev;
++ priv->rxch.netdev = dev;
+
+ err = register_netdev(dev);
+ if (err)
+@@ -786,32 +1018,23 @@ ltq_etop_remove(struct platform_device *pdev)
+ return 0;
+ }
+
++static const struct of_device_id ltq_etop_match[] = {
++ { .compatible = "lantiq,etop-xway" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, ltq_etop_match);
++
+ static struct platform_driver ltq_mii_driver = {
++ .probe = ltq_etop_probe,
+ .remove = ltq_etop_remove,
+ .driver = {
+ .name = "ltq_etop",
+ .owner = THIS_MODULE,
++ .of_match_table = ltq_etop_match,
+ },
+ };
+
+-int __init
+-init_ltq_etop(void)
+-{
+- int ret = platform_driver_probe(&ltq_mii_driver, ltq_etop_probe);
+-
+- if (ret)
+- pr_err("ltq_etop: Error registering platform driver!");
+- return ret;
+-}
+-
+-static void __exit
+-exit_ltq_etop(void)
+-{
+- platform_driver_unregister(&ltq_mii_driver);
+-}
+-
+-module_init(init_ltq_etop);
+-module_exit(exit_ltq_etop);
++module_platform_driver(ltq_mii_driver);
+
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+ MODULE_DESCRIPTION("Lantiq SoC ETOP");
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.14/0025-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch b/target/linux/lantiq/patches-3.14/0029-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
index 841401febb..a9be6fce0d 100644
--- a/target/linux/lantiq/patches-3.14/0025-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
+++ b/target/linux/lantiq/patches-3.14/0029-GPIO-MIPS-lantiq-add-gpio-driver-for-falcon-SoC.patch
@@ -1,7 +1,7 @@
-From 8d45ea02fc0e9b5edd7deaf564663f1ffe8bed64 Mon Sep 17 00:00:00 2001
+From 7e178ce2e5f3aef38d4bdd2c0e02eae6100d5af4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:22:19 +0200
-Subject: [PATCH 25/31] GPIO: MIPS: lantiq: add gpio driver for falcon SoC
+Subject: [PATCH 29/36] GPIO: MIPS: lantiq: add gpio driver for falcon SoC
Add driver for GPIO blocks found on Lantiq FALCON SoC. The SoC has 5 banks of
up to 32 pads. The GPIO blocks have a per pin IRQs.
diff --git a/target/linux/lantiq/patches-3.14/0031-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch
index 412a32a42a..0a1064208c 100644
--- a/target/linux/lantiq/patches-3.14/0031-GPIO-add-named-gpio-exports.patch
+++ b/target/linux/lantiq/patches-3.14/0030-GPIO-add-named-gpio-exports.patch
@@ -1,7 +1,7 @@
-From 6774a8fcd63da9511faa7501ee20c4dde289bb07 Mon Sep 17 00:00:00 2001
+From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 31/31] GPIO: add named gpio exports
+Subject: [PATCH 30/36] GPIO: add named gpio exports
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0026-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
index 9a2e9616c9..713c2aa533 100644
--- a/target/linux/lantiq/patches-3.14/0026-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-3.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -1,7 +1,7 @@
-From 5b376c19a3608cf37908c58b47483909b8ec173a Mon Sep 17 00:00:00 2001
+From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:26:42 +0200
-Subject: [PATCH 26/31] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master
This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
diff --git a/target/linux/lantiq/patches-3.14/0027-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-3.14/0032-USB-fix-roothub-for-IFXHCD.patch
index 68af3bf5ab..620942665d 100644
--- a/target/linux/lantiq/patches-3.14/0027-USB-fix-roothub-for-IFXHCD.patch
+++ b/target/linux/lantiq/patches-3.14/0032-USB-fix-roothub-for-IFXHCD.patch
@@ -1,7 +1,7 @@
-From 53c4acc1d3c7eae439b8bf3422de876e8a3e3bdb Mon Sep 17 00:00:00 2001
+From 326714a47233e4a524afa0c8398276fddf0dbd4d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 6 Dec 2012 19:59:53 +0100
-Subject: [PATCH 27/31] USB: fix roothub for IFXHCD
+Subject: [PATCH 32/36] USB: fix roothub for IFXHCD
---
arch/mips/lantiq/Kconfig | 1 +
diff --git a/target/linux/lantiq/patches-3.14/0028-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.14/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
index 3c3703e701..3a57416841 100644
--- a/target/linux/lantiq/patches-3.14/0028-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ b/target/linux/lantiq/patches-3.14/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -1,7 +1,7 @@
-From 855c99aff4c1fb440a679cc8481947daf95643b8 Mon Sep 17 00:00:00 2001
+From e75df4f96373e5d16f8ca13aa031e54cdcfeda62 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 13 Mar 2013 09:29:37 +0100
-Subject: [PATCH 28/31] SPI: MIPS: lantiq: adds spi-xway
+Subject: [PATCH 33/36] SPI: MIPS: lantiq: adds spi-xway
This patch adds support for the SPI core found on several Lantiq SoCs.
The Driver has been runtime tested in combination with m25p80 Flash Devices
diff --git a/target/linux/lantiq/patches-3.14/0029-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/lantiq/patches-3.14/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
index ca9dd5a369..9589baa169 100644
--- a/target/linux/lantiq/patches-3.14/0029-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
+++ b/target/linux/lantiq/patches-3.14/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch
@@ -1,7 +1,7 @@
-From 748c654a6ba890e9a1b5bd29d0f198ce6b2c091f Mon Sep 17 00:00:00 2001
+From b1b9fca8c317afc3f2b78bb54f877e8a830a819d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 9 Aug 2013 18:47:27 +0200
-Subject: [PATCH 29/31] reset: Fix compile when reset RESET_CONTROLLER is not
+Subject: [PATCH 34/36] reset: Fix compile when reset RESET_CONTROLLER is not
selected
Drivers need to protect their reset api calls with #ifdef to avoid compile
diff --git a/target/linux/lantiq/patches-3.14/0010-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
index 849e6701bb..3b92b95b75 100644
--- a/target/linux/lantiq/patches-3.14/0010-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ b/target/linux/lantiq/patches-3.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -1,17 +1,18 @@
-From 9f921445b6dbf2beef397c6aa038db135e92eb80 Mon Sep 17 00:00:00 2001
+From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
-Date: Wed, 13 Mar 2013 10:02:58 +0100
-Subject: [PATCH 10/31] owrt: lantiq: wifi and ethernet eeprom handling
+Date: Wed, 10 Sep 2014 22:42:14 +0200
+Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
+Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 +
.../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
arch/mips/lantiq/xway/Makefile | 3 +
- arch/mips/lantiq/xway/ath_eep.c | 277 ++++++++++++++++++++
+ arch/mips/lantiq/xway/ath_eep.c | 282 ++++++++++++++++++++
arch/mips/lantiq/xway/eth_mac.c | 76 ++++++
arch/mips/lantiq/xway/pci-ath-fixup.c | 109 ++++++++
arch/mips/lantiq/xway/rt_eep.c | 60 +++++
- 7 files changed, 534 insertions(+)
+ 7 files changed, 539 insertions(+)
create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
create mode 100644 arch/mips/lantiq/xway/ath_eep.c
create mode 100644 arch/mips/lantiq/xway/eth_mac.c
@@ -57,10 +58,10 @@ index 2dd442c..de876e1 100644
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/ath_eep.c b/arch/mips/lantiq/xway/ath_eep.c
new file mode 100644
-index 0000000..cd07f9a
+index 0000000..aff42ac
--- /dev/null
+++ b/arch/mips/lantiq/xway/ath_eep.c
-@@ -0,0 +1,277 @@
+@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
@@ -104,7 +105,7 @@ index 0000000..cd07f9a
+ struct device_node *np = pdev->dev.of_node, *mtd_np;
+ struct resource *eep_res, *mac_res = NULL;
+ void __iomem *eep, *mac;
-+ int mac_offset;
++ int mac_offset, led_pin;
+ u32 mac_inc = 0, pci_slot = 0;
+ int i;
+ struct mtd_info *the_mtd;
@@ -196,6 +197,11 @@ index 0000000..cd07f9a
+
+ }
+
++ if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) {
++ ath9k_pdata.led_pin = led_pin;
++ dev_info(&pdev->dev, "using led pin %d.\n", led_pin);
++ }
++
+ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
+
+ return 0;
diff --git a/target/linux/lantiq/patches-3.14/0011-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-3.14/0036-owrt-generic-dtb-image-hack.patch
index e07d7ceec2..fba8bb3ad5 100644
--- a/target/linux/lantiq/patches-3.14/0011-owrt-generic-dtb-image-hack.patch
+++ b/target/linux/lantiq/patches-3.14/0036-owrt-generic-dtb-image-hack.patch
@@ -1,7 +1,7 @@
-From 572e107a37deb7bc8512ca9144f4e8f24b36e451 Mon Sep 17 00:00:00 2001
+From dba8578e06aedf1e67312ebfc6162e2fadc9448d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 7 Aug 2014 18:32:12 +0200
-Subject: [PATCH 11/31] owrt: generic dtb image hack
+Subject: [PATCH 36/36] owrt: generic dtb image hack
Signed-off-by: John Crispin <blogic@openwrt.org>
---
diff --git a/target/linux/lantiq/patches-3.14/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch b/target/linux/lantiq/patches-3.14/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch
new file mode 100644
index 0000000000..856733ad3b
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch
@@ -0,0 +1,79 @@
+From baea71233ed1796651cab6ead484a18666a765aa Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 11 Sep 2014 19:25:25 +0200
+Subject: [PATCH] MIPS: lantiq: move eiu init after irq_domain register
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/irq.c | 48 ++++++++++++++++++++++++------------------------
+ 1 file changed, 24 insertions(+), 24 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 6b94cc7..3bbedf6 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -380,30 +380,6 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ panic("Failed to remap icu memory");
+ }
+
+- /* the external interrupts are optional and xway only */
+- eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
+- if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
+- /* find out how many external irq sources we have */
+- exin_avail = of_irq_count(eiu_node);
+-
+- if (exin_avail > MAX_EIU)
+- exin_avail = MAX_EIU;
+-
+- ret = of_irq_to_resource_table(eiu_node,
+- ltq_eiu_irq, exin_avail);
+- if (ret != exin_avail)
+- panic("failed to load external irq resources");
+-
+- if (request_mem_region(res.start, resource_size(&res),
+- res.name) < 0)
+- pr_err("Failed to request eiu memory");
+-
+- ltq_eiu_membase = ioremap_nocache(res.start,
+- resource_size(&res));
+- if (!ltq_eiu_membase)
+- panic("Failed to remap eiu memory");
+- }
+-
+ /* turn off all irqs by default */
+ for (i = 0; i < MAX_IM; i++) {
+ /* make sure all irqs are turned off by default */
+@@ -460,6 +436,30 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
+ if (MIPS_CPU_TIMER_IRQ != 7)
+ irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
+
++ /* the external interrupts are optional and xway only */
++ eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
++ if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
++ /* find out how many external irq sources we have */
++ exin_avail = of_irq_count(eiu_node);
++
++ if (exin_avail > MAX_EIU)
++ exin_avail = MAX_EIU;
++
++ ret = of_irq_to_resource_table(eiu_node,
++ ltq_eiu_irq, exin_avail);
++ if (ret != exin_avail)
++ panic("failed to load external irq resources");
++
++ if (request_mem_region(res.start, resource_size(&res),
++ res.name) < 0)
++ pr_err("Failed to request eiu memory");
++
++ ltq_eiu_membase = ioremap_nocache(res.start,
++ resource_size(&res));
++ if (!ltq_eiu_membase)
++ panic("Failed to remap eiu memory");
++ }
++
+ return 0;
+ }
+
+--
+1.7.10.4
+
diff --git a/target/linux/lantiq/patches-3.14/0101-mtd-split.patch b/target/linux/lantiq/patches-3.14/0101-mtd-split.patch
new file mode 100644
index 0000000000..e766207803
--- /dev/null
+++ b/target/linux/lantiq/patches-3.14/0101-mtd-split.patch
@@ -0,0 +1,200 @@
+Index: linux-3.14.18/arch/mips/lantiq/xway/Makefile
+===================================================================
+--- linux-3.14.18.orig/arch/mips/lantiq/xway/Makefile 2014-09-11 16:31:10.000000000 +0200
++++ linux-3.14.18/arch/mips/lantiq/xway/Makefile 2014-09-11 16:32:52.188968735 +0200
+@@ -1,6 +1,6 @@
+ obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
+
+-obj-y += vmmc.o tffs.o
++obj-y += vmmc.o tffs.o mtd_split.o
+
+ obj-y += eth_mac.o
+ obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+Index: linux-3.14.18/arch/mips/lantiq/xway/mtd_split.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-3.14.18/arch/mips/lantiq/xway/mtd_split.c 2014-09-11 16:31:51.712967248 +0200
+@@ -0,0 +1,129 @@
++#include <linux/magic.h>
++#include <linux/root_dev.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++
++struct squashfs_super_block {
++ __le32 s_magic;
++ __le32 pad0[9];
++ __le64 bytes_used;
++};
++
++static void split_brnimage_kernel(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++ unsigned long buf[4];
++ // Assume at most 2MB of kernel image
++ unsigned long end = offset + (2 << 20);
++ unsigned long part_size = offset + 0x400 - 12;
++ size_t len;
++ int ret;
++
++ if (strcmp(name, "firmware") != 0)
++ return;
++ while (part_size < end) {
++ long size_min = part_size - 0x400 - 12 - offset;
++ long size_max = part_size + 12 - offset;
++ ret = mtd_read(master, part_size, 16, &len, (void *)buf);
++ if (ret || len != 16)
++ return;
++
++ if (le32_to_cpu(buf[0]) < size_min ||
++ le32_to_cpu(buf[0]) > size_max) {
++ part_size += 0x400;
++ continue;
++ }
++
++ if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) {
++ part_size += 12 - offset;
++ __mtd_add_partition(master, "rootfs", offset + part_size,
++ size - part_size, false);
++ return;
++ }
++ part_size += 0x400;
++ }
++}
++
++static void split_eva_kernel(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++#define EVA_MAGIC 0xfeed1281
++ unsigned long magic = 0;
++ unsigned long part_size = 0, p;
++ size_t len;
++ int ret;
++
++ if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
++ return;
++
++ ret = mtd_read(master, offset, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return;
++
++ if (le32_to_cpu(magic) != EVA_MAGIC)
++ return;
++
++ ret = mtd_read(master, offset + 4, 4, &len, (void *)&part_size);
++ if (ret || len != sizeof(part_size))
++ return;
++
++ p = part_size = le32_to_cpu(part_size) + 0x18;
++ p &= ~0xffff;
++ p += 0x10000;
++
++ ret = mtd_read(master, offset + p, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return;
++
++ if (magic == SQUASHFS_MAGIC)
++ part_size = p + 0x100;
++ else
++ part_size = mtd_pad_erasesize(master, offset, len);
++
++ if (part_size + master->erasesize > size)
++ return;
++
++ __mtd_add_partition(master, "rootfs", offset + part_size,
++ size - part_size, false);
++}
++
++static void split_tplink_kernel(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++#define TPLINK_MAGIC 0x00000002
++ unsigned long magic = 0;
++ unsigned long part_size = 0;
++ size_t len;
++ int ret;
++
++ if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0)
++ return;
++
++ ret = mtd_read(master, offset, 4, &len, (void *)&magic);
++ if (ret || len != sizeof(magic))
++ return;
++
++ if (le32_to_cpu(magic) != TPLINK_MAGIC)
++ return;
++
++ ret = mtd_read(master, offset + 0x78, 4, &len, (void *)&part_size);
++ if (ret || len != sizeof(part_size))
++ return;
++
++ part_size = be32_to_cpu(part_size) + 0x200;
++ if (part_size + master->erasesize > size)
++ return;
++
++ __mtd_add_partition(master, "rootfs", offset + part_size,
++ size - part_size, false);
++}
++
++void arch_split_mtd_part(struct mtd_info *master, const char *name,
++ int offset, int size)
++{
++ split_tplink_kernel(master, name, offset, size);
++ split_eva_kernel(master, name, offset, size);
++ split_brnimage_kernel(master, name, offset, size);
++}
+Index: linux-3.14.18/include/linux/mtd/partitions.h
+===================================================================
+--- linux-3.14.18.orig/include/linux/mtd/partitions.h 2014-09-11 16:31:10.752966240 +0200
++++ linux-3.14.18/include/linux/mtd/partitions.h 2014-09-11 16:44:49.432986380 +0200
+@@ -89,12 +89,17 @@
+ int mtd_is_partition(const struct mtd_info *mtd);
+ int mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length);
++int __mtd_add_partition(struct mtd_info *master, const char *name,
++ long long offset, long long length, bool dup_check);
++
+ int mtd_del_partition(struct mtd_info *master, int partno);
+ struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
+ uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+-extern void __weak arch_split_mtd_part(struct mtd_info *master,
+- const char *name, int offset, int size);
++void __weak arch_split_mtd_part(struct mtd_info *master,
++ const char *name, int offset, int size);
++unsigned long
++mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len);
+
+ int parse_mtd_partitions_by_type(struct mtd_info *master,
+ enum mtd_parser_type type,
+Index: linux-3.14.18/drivers/mtd/mtdpart.c
+===================================================================
+--- linux-3.14.18.orig/drivers/mtd/mtdpart.c 2014-09-11 16:31:10.752966240 +0200
++++ linux-3.14.18/drivers/mtd/mtdpart.c 2014-09-11 16:33:11.732969216 +0200
+@@ -617,7 +617,7 @@
+ }
+
+
+-static int
++int
+ __mtd_add_partition(struct mtd_info *master, const char *name,
+ long long offset, long long length, bool dup_check)
+ {
+@@ -738,7 +738,7 @@
+ return nr_parts;
+ }
+
+-static inline unsigned long
++unsigned long
+ mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
+ {
+ unsigned long mask = mtd->erasesize - 1;
+@@ -807,7 +807,6 @@
+ return;
+
+ len = be32_to_cpu(hdr.size) + 0x40;
+- len = mtd_pad_erasesize(master, part->offset, len);
+ if (len + master->erasesize > part->mtd.size)
+ return;
+