diff options
Diffstat (limited to 'target/linux/lantiq/xway/base-files')
4 files changed, 242 insertions, 0 deletions
diff --git a/target/linux/lantiq/xway/base-files/etc/board.d/01_leds b/target/linux/lantiq/xway/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..82a39f4648 --- /dev/null +++ b/target/linux/lantiq/xway/base-files/etc/board.d/01_leds @@ -0,0 +1,44 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +led_wifi="$(get_dt_led wifi)" +[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt" + +led_usb="$(get_dt_led usb)" +[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1" + +led_usb2="$(get_dt_led usb2)" +[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1" + +led_dsl="$(get_dt_led dsl)" +[ -n "$led_dsl" ] && { + led_internet="$(get_dt_led internet)" + if [ -n "$led_internet" ]; then + ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0" + ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan" + else + ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0" + fi +} + +board=$(board_name) + +case "$board" in +arcadyan,arv7506pw11) + ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio" + ;; +arcadyan,arv752dpw22) + ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/lantiq/xway/base-files/etc/board.d/02_network b/target/linux/lantiq/xway/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..b1b742bd1f --- /dev/null +++ b/target/linux/lantiq/xway/base-files/etc/board.d/02_network @@ -0,0 +1,122 @@ +#!/bin/sh +# +# Copyright (C) 2011-2015 OpenWrt.org +# + +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh + +board_config_update + +annex="a" + +lan_mac="" +wan_mac="" + +board=$(board_name) + +case "$board" in +arcadyan,arv4510pw) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0" + ;; +arcadyan,arv4519pw|\ +arcadyan,arv7510pw22|\ +arcadyan,arv7518pw) + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" + ;; +arcadyan,arv7506pw11) + annex="b" + wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + ;; +arcadyan,arv7519pw) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" + ;; +arcadyan,arv7525pw|\ +arcadyan,arv752dpw) + annex="b" + ucidef_set_interface_lan 'eth0' + ;; +arcadyan,arv752dpw22|\ +arcadyan,arv8539pw22) + annex="b" + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" + ;; +audiocodes,mp-252) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + ;; +avm,fritz7312|\ +avm,fritz7320) + annex="b" + wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) + ucidef_set_interface_lan 'eth0' + ;; +bt,homehub-v2b) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0" + ;; +bt,homehub-v3a) + lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_set_interface_lan 'eth0' + ;; +buffalo,wbmr-hp-g300h) + ucidef_add_switch "switch0" \ + "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" + ;; +netgear,dgn3500|\ +netgear,dgn3500b) + lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) + wan_mac=$(macaddr_add "$lan_mac" 1) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" + ;; +siemens,gigaset-sx76x) + annex="b" + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" + ;; +zte,h201l) + annex="b" + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" + ;; +zyxel,p-2601hn) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0" + ;; +*) + ucidef_set_interface_lan 'eth0' + ;; +esac + +ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ + ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl" + +if lantiq_is_vdsl_system; then + ucidef_add_vdsl_modem "$annex" "av" +else + ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" +fi + +ucidef_set_interface_wan "dsl0" "pppoe" + +[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" +[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" + +board_config_flush + +exit 0 + diff --git a/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom new file mode 100644 index 0000000000..1f12da8553 --- /dev/null +++ b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -0,0 +1,56 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +caldata_extract_swap() { + local part=$1 + local offset=$2 + local count=$3 + local mtd + + mtd=$(find_mtd_chardev $part) + [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part" + + offset=$(($offset / 2)) + count=$(($count / 2)) + + dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab 2>/dev/null || \ + caldata_die "failed to extract calibration data from $mtd" +} + +case "$FIRMWARE" in + "ath9k-eeprom-pci-0000:00:0e.0.bin" | \ + "ath9k-eeprom-pci-0000:01:00.0.bin" | \ + "ath9k-eeprom-pci-0000:02:00.0.bin") + board=$(board_name) + + case "$board" in + arcadyan,arv7518pw) + caldata_extract_swap "boardconfig" 0x400 0x1000 + ;; + arcadyan,arv8539pw22) + caldata_extract_swap "art" 0x400 0x1000 + ;; + bt,homehub-v2b) + caldata_extract_swap "art" 0x0 0x1000 + ath9k_patch_mac_crc "00:00:00:00:00:00" 0x20c + ;; + bt,homehub-v3a) + caldata_extract_swap "art-copy" 0x0 0x1000 + ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c + ;; + netgear,dgn3500|netgear,dgn3500b) + caldata_extract "calibration" 0xf000 0x1000 + ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c + ;; + avm,fritz7312|avm,fritz7320) + caldata_extract "urlader" 0x985 0x1000 + ;; + *) + caldata_die "board $board is not supported yet" + ;; + esac + ;; +esac diff --git a/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..5ef0a0ddb9 --- /dev/null +++ b/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + bt,homehub-v2b|\ + bt,homehub-v3a) + nand_do_upgrade $1 + ;; + *) + default_do_upgrade "$1" + ;; + esac +} |