aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/patches-5.10
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/patches-5.10')
-rw-r--r--target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch145
-rw-r--r--target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch101
-rw-r--r--target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch122
-rw-r--r--target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch104
-rw-r--r--target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch8
-rw-r--r--target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch16
6 files changed, 484 insertions, 12 deletions
diff --git a/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch b/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch
new file mode 100644
index 0000000000..5bbf752dba
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0702-v5.16-net-lantiq-add-support-for-jumbo-frames.patch
@@ -0,0 +1,145 @@
+From 998ac358019e491217e752bc6dcbb3afb2a6fa3e Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Sun, 19 Sep 2021 20:24:28 +0200
+Subject: [PATCH] net: lantiq: add support for jumbo frames
+
+Add support for jumbo frames. Full support for jumbo frames requires
+changes in the DSA switch driver (lantiq_gswip.c).
+
+Tested on BT Hone Hub 5A.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/lantiq_xrx200.c | 64 +++++++++++++++++++++++++---
+ 1 file changed, 57 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/ethernet/lantiq_xrx200.c
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -14,13 +14,15 @@
+ #include <linux/clk.h>
+ #include <linux/delay.h>
+
++#include <linux/if_vlan.h>
++
+ #include <linux/of_net.h>
+ #include <linux/of_platform.h>
+
+ #include <xway_dma.h>
+
+ /* DMA */
+-#define XRX200_DMA_DATA_LEN 0x600
++#define XRX200_DMA_DATA_LEN (SZ_64K - 1)
+ #define XRX200_DMA_RX 0
+ #define XRX200_DMA_TX 1
+
+@@ -106,7 +108,8 @@ static void xrx200_flush_dma(struct xrx2
+ break;
+
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+- XRX200_DMA_DATA_LEN;
++ (ch->priv->net_dev->mtu + VLAN_ETH_HLEN +
++ ETH_FCS_LEN);
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+ }
+@@ -154,19 +157,20 @@ static int xrx200_close(struct net_devic
+
+ static int xrx200_alloc_skb(struct xrx200_chan *ch)
+ {
++ int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+ dma_addr_t mapping;
+ int ret = 0;
+
+ ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
+- XRX200_DMA_DATA_LEN);
++ len);
+ if (!ch->skb[ch->dma.desc]) {
+ ret = -ENOMEM;
+ goto skip;
+ }
+
+ mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
+- XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE);
++ len, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+ ch->skb[ch->dma.desc] = skb;
+@@ -179,8 +183,7 @@ static int xrx200_alloc_skb(struct xrx20
+ wmb();
+ skip:
+ ch->dma.desc_base[ch->dma.desc].ctl =
+- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+- XRX200_DMA_DATA_LEN;
++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len;
+
+ return ret;
+ }
+@@ -340,10 +343,57 @@ err_drop:
+ return NETDEV_TX_OK;
+ }
+
++static int
++xrx200_change_mtu(struct net_device *net_dev, int new_mtu)
++{
++ struct xrx200_priv *priv = netdev_priv(net_dev);
++ struct xrx200_chan *ch_rx = &priv->chan_rx;
++ int old_mtu = net_dev->mtu;
++ bool running = false;
++ struct sk_buff *skb;
++ int curr_desc;
++ int ret = 0;
++
++ net_dev->mtu = new_mtu;
++
++ if (new_mtu <= old_mtu)
++ return ret;
++
++ running = netif_running(net_dev);
++ if (running) {
++ napi_disable(&ch_rx->napi);
++ ltq_dma_close(&ch_rx->dma);
++ }
++
++ xrx200_poll_rx(&ch_rx->napi, LTQ_DESC_NUM);
++ curr_desc = ch_rx->dma.desc;
++
++ for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM;
++ ch_rx->dma.desc++) {
++ skb = ch_rx->skb[ch_rx->dma.desc];
++ ret = xrx200_alloc_skb(ch_rx);
++ if (ret) {
++ net_dev->mtu = old_mtu;
++ break;
++ }
++ dev_kfree_skb_any(skb);
++ }
++
++ ch_rx->dma.desc = curr_desc;
++ if (running) {
++ napi_enable(&ch_rx->napi);
++ ltq_dma_open(&ch_rx->dma);
++ ltq_dma_enable_irq(&ch_rx->dma);
++ }
++
++ return ret;
++}
++
+ static const struct net_device_ops xrx200_netdev_ops = {
+ .ndo_open = xrx200_open,
+ .ndo_stop = xrx200_close,
+ .ndo_start_xmit = xrx200_start_xmit,
++ .ndo_change_mtu = xrx200_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ };
+@@ -454,7 +504,7 @@ static int xrx200_probe(struct platform_
+ net_dev->netdev_ops = &xrx200_netdev_ops;
+ SET_NETDEV_DEV(net_dev, dev);
+ net_dev->min_mtu = ETH_ZLEN;
+- net_dev->max_mtu = XRX200_DMA_DATA_LEN;
++ net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
+
+ /* load the memory ranges */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch
new file mode 100644
index 0000000000..9ff0baed43
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch
@@ -0,0 +1,101 @@
+From 24a43ae2ac0ea06c474b1c80dc75651294d49321 Mon Sep 17 00:00:00 2001
+From: Thomas Nixon <tom@tomn.co.uk>
+Date: Sat, 2 Oct 2021 00:48:05 +0100
+Subject: [PATCH 2/2] net: lantiq: enable jumbo frames on GSWIP
+
+This enables non-standard MTUs on a per-port basis, with the overall
+frame size set based on the CPU port.
+
+When the MTU is not changed, this should have no effect.
+
+Long packets crash the switch with MTUs of greater than 2526, so the
+maximum is limited for now.
+
+Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
+---
+ drivers/net/dsa/lantiq_gswip.c | 46 +++++++++++++++++++++++++++++++---
+ 1 file changed, 42 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -238,6 +238,11 @@
+
+ #define XRX200_GPHY_FW_ALIGN (16 * 1024)
+
++/* maximum packet size supported by the switch; in theory this should be 9600,
++ * but long packets currently cause lock-ups with an MTU of over 2526
++ */
++#define GSWIP_MAX_PACKET_LENGTH 2556
++
+ struct gswip_hw_info {
+ int max_ports;
+ int cpu_port;
+@@ -851,10 +856,6 @@ static int gswip_setup(struct dsa_switch
+ gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
+ GSWIP_PCE_PCTRL_0p(cpu_port));
+
+- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
+- GSWIP_MAC_CTRL_2p(cpu_port));
+- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN,
+- GSWIP_MAC_FLEN);
+ gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
+ GSWIP_BM_QUEUE_GCTRL);
+
+@@ -871,6 +872,8 @@ static int gswip_setup(struct dsa_switch
+ return err;
+ }
+
++ ds->mtu_enforcement_ingress = true;
++
+ gswip_port_enable(ds, cpu_port, NULL);
+ return 0;
+ }
+@@ -1433,6 +1436,39 @@ static int gswip_port_fdb_dump(struct ds
+ return 0;
+ }
+
++static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
++{
++ /* includes 8 bytes for special header */
++ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN;
++}
++
++static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
++{
++ struct gswip_priv *priv = ds->priv;
++ int cpu_port = priv->hw_info->cpu_port;
++
++ /* cpu port always has maximum mtu of user ports, so use it to set
++ * switch frame size, including 8 byte special header
++ */
++ if (port == cpu_port) {
++ new_mtu += 8;
++ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
++ GSWIP_MAC_FLEN);
++ }
++
++ /* enable MLEN for ports with non-standard MTUs, including the special
++ * header on the CPU port added above
++ */
++ if (new_mtu != ETH_DATA_LEN)
++ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
++ GSWIP_MAC_CTRL_2p(port));
++ else
++ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0,
++ GSWIP_MAC_CTRL_2p(port));
++
++ return 0;
++}
++
+ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+@@ -1776,6 +1812,8 @@ static const struct dsa_switch_ops gswip
+ .port_fdb_add = gswip_port_fdb_add,
+ .port_fdb_del = gswip_port_fdb_del,
+ .port_fdb_dump = gswip_port_fdb_dump,
++ .port_change_mtu = gswip_port_change_mtu,
++ .port_max_mtu = gswip_port_max_mtu,
+ .phylink_validate = gswip_phylink_validate,
+ .phylink_mac_config = gswip_phylink_mac_config,
+ .phylink_mac_link_down = gswip_phylink_mac_link_down,
diff --git a/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch
new file mode 100644
index 0000000000..77c0eb6354
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch
@@ -0,0 +1,122 @@
+From 1488fc204568f707fe2a42a913788c00a95af30e Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Fri, 17 Dec 2021 01:07:40 +0100
+Subject: [PATCH] net: lantiq_xrx200: increase buffer reservation
+
+If the user sets a lower mtu on the CPU port than on the switch,
+then DMA inserts a few more bytes into the buffer than expected.
+In the worst case, it may exceed the size of the buffer. The
+experiments showed that the buffer should be a multiple of the
+burst length value. This patch rounds the length of the rx buffer
+upwards and fixes this bug. The reservation of FCS space in the
+buffer has been removed as PMAC strips the FCS.
+
+Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames")
+Reported-by: Thomas Nixon <tom@tomn.co.uk>
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/lantiq_xrx200.c | 34 ++++++++++++++++++++--------
+ 1 file changed, 24 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/ethernet/lantiq_xrx200.c
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -70,6 +70,8 @@ struct xrx200_priv {
+ struct xrx200_chan chan_tx;
+ struct xrx200_chan chan_rx;
+
++ u16 rx_buf_size;
++
+ struct net_device *net_dev;
+ struct device *dev;
+
+@@ -96,6 +98,16 @@ static void xrx200_pmac_mask(struct xrx2
+ xrx200_pmac_w32(priv, val, offset);
+ }
+
++static int xrx200_max_frame_len(int mtu)
++{
++ return VLAN_ETH_HLEN + mtu;
++}
++
++static int xrx200_buffer_size(int mtu)
++{
++ return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN);
++}
++
+ /* drop all the packets from the DMA ring */
+ static void xrx200_flush_dma(struct xrx200_chan *ch)
+ {
+@@ -108,8 +120,7 @@ static void xrx200_flush_dma(struct xrx2
+ break;
+
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+- (ch->priv->net_dev->mtu + VLAN_ETH_HLEN +
+- ETH_FCS_LEN);
++ ch->priv->rx_buf_size;
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+ }
+@@ -157,21 +168,21 @@ static int xrx200_close(struct net_devic
+
+ static int xrx200_alloc_skb(struct xrx200_chan *ch)
+ {
+- int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
++ struct xrx200_priv *priv = ch->priv;
+ dma_addr_t mapping;
+ int ret = 0;
+
+- ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
+- len);
++ ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev,
++ priv->rx_buf_size);
+ if (!ch->skb[ch->dma.desc]) {
+ ret = -ENOMEM;
+ goto skip;
+ }
+
+- mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
+- len, DMA_FROM_DEVICE);
+- if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
++ mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data,
++ priv->rx_buf_size, DMA_FROM_DEVICE);
++ if (unlikely(dma_mapping_error(priv->dev, mapping))) {
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+ ch->skb[ch->dma.desc] = skb;
+ ret = -ENOMEM;
+@@ -183,7 +194,7 @@ static int xrx200_alloc_skb(struct xrx20
+ wmb();
+ skip:
+ ch->dma.desc_base[ch->dma.desc].ctl =
+- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len;
++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | priv->rx_buf_size;
+
+ return ret;
+ }
+@@ -355,6 +366,7 @@ xrx200_change_mtu(struct net_device *net
+ int ret = 0;
+
+ net_dev->mtu = new_mtu;
++ priv->rx_buf_size = xrx200_buffer_size(new_mtu);
+
+ if (new_mtu <= old_mtu)
+ return ret;
+@@ -374,6 +386,7 @@ xrx200_change_mtu(struct net_device *net
+ ret = xrx200_alloc_skb(ch_rx);
+ if (ret) {
+ net_dev->mtu = old_mtu;
++ priv->rx_buf_size = xrx200_buffer_size(old_mtu);
+ break;
+ }
+ dev_kfree_skb_any(skb);
+@@ -504,7 +517,8 @@ static int xrx200_probe(struct platform_
+ net_dev->netdev_ops = &xrx200_netdev_ops;
+ SET_NETDEV_DEV(net_dev, dev);
+ net_dev->min_mtu = ETH_ZLEN;
+- net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
++ net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0);
++ priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN);
+
+ /* load the memory ranges */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch
new file mode 100644
index 0000000000..f2c36952fc
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch
@@ -0,0 +1,104 @@
+From c3e6b2c35b34214c58c1e90d65dab5f5393608e7 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2@wp.pl>
+Date: Mon, 3 Jan 2022 20:43:16 +0100
+Subject: [PATCH] net: lantiq_xrx200: add ingress SG DMA support
+
+This patch adds support for scatter gather DMA. DMA in PMAC splits
+the packet into several buffers when the MTU on the CPU port is
+less than the MTU of the switch. The first buffer starts at an
+offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the
+offset. Thanks to this patch, the user can still connect to the
+device in such a situation. For normal configurations, the patch
+has no effect on performance.
+
+Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/lantiq_xrx200.c | 47 +++++++++++++++++++++++-----
+ 1 file changed, 40 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/ethernet/lantiq_xrx200.c
++++ b/drivers/net/ethernet/lantiq_xrx200.c
+@@ -26,6 +26,9 @@
+ #define XRX200_DMA_RX 0
+ #define XRX200_DMA_TX 1
+
++#define XRX200_DMA_PACKET_COMPLETE 0
++#define XRX200_DMA_PACKET_IN_PROGRESS 1
++
+ /* cpu port mac */
+ #define PMAC_RX_IPG 0x0024
+ #define PMAC_RX_IPG_MASK 0xf
+@@ -61,6 +64,9 @@ struct xrx200_chan {
+ struct ltq_dma_channel dma;
+ struct sk_buff *skb[LTQ_DESC_NUM];
+
++ struct sk_buff *skb_head;
++ struct sk_buff *skb_tail;
++
+ struct xrx200_priv *priv;
+ };
+
+@@ -204,7 +210,8 @@ static int xrx200_hw_receive(struct xrx2
+ struct xrx200_priv *priv = ch->priv;
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+- int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
++ u32 ctl = desc->ctl;
++ int len = (ctl & LTQ_DMA_SIZE_MASK);
+ struct net_device *net_dev = priv->net_dev;
+ int ret;
+
+@@ -220,12 +227,36 @@ static int xrx200_hw_receive(struct xrx2
+ }
+
+ skb_put(skb, len);
+- skb->protocol = eth_type_trans(skb, net_dev);
+- netif_receive_skb(skb);
+- net_dev->stats.rx_packets++;
+- net_dev->stats.rx_bytes += len;
+
+- return 0;
++ /* add buffers to skb via skb->frag_list */
++ if (ctl & LTQ_DMA_SOP) {
++ ch->skb_head = skb;
++ ch->skb_tail = skb;
++ } else if (ch->skb_head) {
++ if (ch->skb_head == ch->skb_tail)
++ skb_shinfo(ch->skb_tail)->frag_list = skb;
++ else
++ ch->skb_tail->next = skb;
++ ch->skb_tail = skb;
++ skb_reserve(ch->skb_tail, -NET_IP_ALIGN);
++ ch->skb_head->len += skb->len;
++ ch->skb_head->data_len += skb->len;
++ ch->skb_head->truesize += skb->truesize;
++ }
++
++ if (ctl & LTQ_DMA_EOP) {
++ ch->skb_head->protocol = eth_type_trans(ch->skb_head, net_dev);
++ netif_receive_skb(ch->skb_head);
++ net_dev->stats.rx_packets++;
++ net_dev->stats.rx_bytes += ch->skb_head->len;
++ ch->skb_head = NULL;
++ ch->skb_tail = NULL;
++ ret = XRX200_DMA_PACKET_COMPLETE;
++ } else {
++ ret = XRX200_DMA_PACKET_IN_PROGRESS;
++ }
++
++ return ret;
+ }
+
+ static int xrx200_poll_rx(struct napi_struct *napi, int budget)
+@@ -240,7 +271,9 @@ static int xrx200_poll_rx(struct napi_st
+
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+ ret = xrx200_hw_receive(ch);
+- if (ret)
++ if (ret == XRX200_DMA_PACKET_IN_PROGRESS)
++ continue;
++ if (ret != XRX200_DMA_PACKET_COMPLETE)
+ return ret;
+ rx++;
+ } else {
diff --git a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch
index bf3b903616..4fb7d0767b 100644
--- a/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch
+++ b/target/linux/lantiq/patches-5.10/0710-v5.16-net-lantiq-configure-the-burst-length-in-ethernet-dr.patch
@@ -75,7 +75,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
priv->txch.netdev = dev;
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -71,6 +71,9 @@ struct xrx200_priv {
+@@ -81,6 +81,9 @@ struct xrx200_priv {
struct net_device *net_dev;
struct device *dev;
@@ -85,7 +85,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
__iomem void *pmac_reg;
};
-@@ -316,8 +319,8 @@ static netdev_tx_t xrx200_start_xmit(str
+@@ -363,8 +366,8 @@ static netdev_tx_t xrx200_start_xmit(str
if (unlikely(dma_mapping_error(priv->dev, mapping)))
goto err_drop;
@@ -96,7 +96,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
desc->addr = mapping - byte_offset;
/* Make sure the address is written before we give it to HW */
-@@ -369,7 +372,7 @@ static int xrx200_dma_init(struct xrx200
+@@ -465,7 +468,7 @@ static int xrx200_dma_init(struct xrx200
int ret = 0;
int i;
@@ -105,7 +105,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
ch_rx->dma.nr = XRX200_DMA_RX;
ch_rx->dma.dev = priv->dev;
-@@ -487,6 +490,18 @@ static int xrx200_probe(struct platform_
+@@ -584,6 +587,18 @@ static int xrx200_probe(struct platform_
if (err)
eth_hw_addr_random(net_dev);
diff --git a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch
index 0b68179a48..7448af8c26 100644
--- a/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch
+++ b/target/linux/lantiq/patches-5.10/0711-v5.16-net-lantiq_xrx200-Hardcode-the-burst-length-value.patch
@@ -15,15 +15,15 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -23,6 +23,7 @@
- #define XRX200_DMA_DATA_LEN 0x600
+@@ -25,6 +25,7 @@
+ #define XRX200_DMA_DATA_LEN (SZ_64K - 1)
#define XRX200_DMA_RX 0
#define XRX200_DMA_TX 1
+#define XRX200_DMA_BURST_LEN 8
- /* cpu port mac */
- #define PMAC_RX_IPG 0x0024
-@@ -71,9 +72,6 @@ struct xrx200_priv {
+ #define XRX200_DMA_PACKET_COMPLETE 0
+ #define XRX200_DMA_PACKET_IN_PROGRESS 1
+@@ -81,9 +82,6 @@ struct xrx200_priv {
struct net_device *net_dev;
struct device *dev;
@@ -33,7 +33,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
__iomem void *pmac_reg;
};
-@@ -320,7 +318,7 @@ static netdev_tx_t xrx200_start_xmit(str
+@@ -367,7 +365,7 @@ static netdev_tx_t xrx200_start_xmit(str
goto err_drop;
/* dma needs to start on a burst length value aligned address */
@@ -42,7 +42,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
desc->addr = mapping - byte_offset;
/* Make sure the address is written before we give it to HW */
-@@ -372,7 +370,8 @@ static int xrx200_dma_init(struct xrx200
+@@ -468,7 +466,8 @@ static int xrx200_dma_init(struct xrx200
int ret = 0;
int i;
@@ -52,7 +52,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
ch_rx->dma.nr = XRX200_DMA_RX;
ch_rx->dma.dev = priv->dev;
-@@ -490,18 +489,6 @@ static int xrx200_probe(struct platform_
+@@ -587,18 +586,6 @@ static int xrx200_probe(struct platform_
if (err)
eth_hw_addr_random(net_dev);