diff options
Diffstat (limited to 'target/linux/lantiq/patches-2.6.32/0013-MIPS-Lantiq-Add-watchdog-support.patch')
| -rw-r--r-- | target/linux/lantiq/patches-2.6.32/0013-MIPS-Lantiq-Add-watchdog-support.patch | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/target/linux/lantiq/patches-2.6.32/0013-MIPS-Lantiq-Add-watchdog-support.patch b/target/linux/lantiq/patches-2.6.32/0013-MIPS-Lantiq-Add-watchdog-support.patch new file mode 100644 index 0000000000..903f674681 --- /dev/null +++ b/target/linux/lantiq/patches-2.6.32/0013-MIPS-Lantiq-Add-watchdog-support.patch @@ -0,0 +1,310 @@ +From 3466449c8f455da0cb646231602e6af16190f592 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 5 May 2011 23:00:23 +0200 +Subject: [PATCH 13/13] MIPS: Lantiq: Add watchdog support + +This patch adds the driver for the watchdog found inside the Lantiq SoC family. + +Signed-off-by: John Crispin <blogic@openwrt.org> +Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com> +Cc: Wim Van Sebroeck <wim@iguana.be> +Cc: linux-mips@linux-mips.org +Cc: linux-watchdog@vger.kernel.org +Patchwork: https://patchwork.linux-mips.org/patch/2327/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +--- + drivers/watchdog/Kconfig | 6 + + drivers/watchdog/Makefile | 1 + + drivers/watchdog/lantiq_wdt.c | 261 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 268 insertions(+), 0 deletions(-) + create mode 100644 drivers/watchdog/lantiq_wdt.c + +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -850,6 +850,12 @@ + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + ++config LANTIQ_WDT ++ tristate "Lantiq SoC watchdog" ++ depends on LANTIQ ++ help ++ Hardware driver for the Lantiq SoC Watchdog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -113,6 +113,7 @@ + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o + + # PARISC Architecture + +--- /dev/null ++++ b/drivers/watchdog/lantiq_wdt.c +@@ -0,0 +1,261 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org> ++ * Based on EP93xx wdt driver ++ */ ++ ++#include <linux/module.h> ++#include <linux/fs.h> ++#include <linux/miscdevice.h> ++#include <linux/watchdog.h> ++#include <linux/platform_device.h> ++#include <linux/uaccess.h> ++#include <linux/clk.h> ++#include <linux/io.h> ++ ++#include <lantiq.h> ++ ++/* Section 3.4 of the datasheet ++ * The password sequence protects the WDT control register from unintended ++ * write actions, which might cause malfunction of the WDT. ++ * ++ * essentially the following two magic passwords need to be written to allow ++ * IO access to the WDT core ++ */ ++#define LTQ_WDT_PW1 0x00BE0000 ++#define LTQ_WDT_PW2 0x00DC0000 ++ ++#define LTQ_WDT_CR 0x0 /* watchdog control register */ ++#define LTQ_WDT_SR 0x8 /* watchdog status register */ ++ ++#define LTQ_WDT_SR_EN (0x1 << 31) /* enable bit */ ++#define LTQ_WDT_SR_PWD (0x3 << 26) /* turn on power */ ++#define LTQ_WDT_SR_CLKDIV (0x3 << 24) /* turn on clock and set */ ++ /* divider to 0x40000 */ ++#define LTQ_WDT_DIVIDER 0x40000 ++#define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */ ++ ++static int nowayout = WATCHDOG_NOWAYOUT; ++ ++static void __iomem *ltq_wdt_membase; ++static unsigned long ltq_io_region_clk_rate; ++ ++static unsigned long ltq_wdt_bootstatus; ++static unsigned long ltq_wdt_in_use; ++static int ltq_wdt_timeout = 30; ++static int ltq_wdt_ok_to_close; ++ ++static void ++ltq_wdt_enable(void) ++{ ++ ltq_wdt_timeout = ltq_wdt_timeout * ++ (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000; ++ if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT) ++ ltq_wdt_timeout = LTQ_MAX_TIMEOUT; ++ ++ /* write the first password magic */ ++ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); ++ /* write the second magic plus the configuration and new timeout */ ++ ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV | ++ LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR); ++} ++ ++static void ++ltq_wdt_disable(void) ++{ ++ /* write the first password magic */ ++ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); ++ /* write the second password magic with no config ++ * this turns the watchdog off ++ */ ++ ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR); ++} ++ ++static ssize_t ++ltq_wdt_write(struct file *file, const char __user *data, ++ size_t len, loff_t *ppos) ++{ ++ if (len) { ++ if (!nowayout) { ++ size_t i; ++ ++ ltq_wdt_ok_to_close = 0; ++ for (i = 0; i != len; i++) { ++ char c; ++ ++ if (get_user(c, data + i)) ++ return -EFAULT; ++ if (c == 'V') ++ ltq_wdt_ok_to_close = 1; ++ else ++ ltq_wdt_ok_to_close = 0; ++ } ++ } ++ ltq_wdt_enable(); ++ } ++ ++ return len; ++} ++ ++static struct watchdog_info ident = { ++ .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | ++ WDIOF_CARDRESET, ++ .identity = "ltq_wdt", ++}; ++ ++static long ++ltq_wdt_ioctl(struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int ret = -ENOTTY; ++ ++ switch (cmd) { ++ case WDIOC_GETSUPPORT: ++ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, ++ sizeof(ident)) ? -EFAULT : 0; ++ break; ++ ++ case WDIOC_GETBOOTSTATUS: ++ ret = put_user(ltq_wdt_bootstatus, (int __user *)arg); ++ break; ++ ++ case WDIOC_GETSTATUS: ++ ret = put_user(0, (int __user *)arg); ++ break; ++ ++ case WDIOC_SETTIMEOUT: ++ ret = get_user(ltq_wdt_timeout, (int __user *)arg); ++ if (!ret) ++ ltq_wdt_enable(); ++ /* intentional drop through */ ++ case WDIOC_GETTIMEOUT: ++ ret = put_user(ltq_wdt_timeout, (int __user *)arg); ++ break; ++ ++ case WDIOC_KEEPALIVE: ++ ltq_wdt_enable(); ++ ret = 0; ++ break; ++ } ++ return ret; ++} ++ ++static int ++ltq_wdt_open(struct inode *inode, struct file *file) ++{ ++ if (test_and_set_bit(0, <q_wdt_in_use)) ++ return -EBUSY; ++ ltq_wdt_in_use = 1; ++ ltq_wdt_enable(); ++ ++ return nonseekable_open(inode, file); ++} ++ ++static int ++ltq_wdt_release(struct inode *inode, struct file *file) ++{ ++ if (ltq_wdt_ok_to_close) ++ ltq_wdt_disable(); ++ else ++ pr_err("ltq_wdt: watchdog closed without warning\n"); ++ ltq_wdt_ok_to_close = 0; ++ clear_bit(0, <q_wdt_in_use); ++ ++ return 0; ++} ++ ++static const struct file_operations ltq_wdt_fops = { ++ .owner = THIS_MODULE, ++ .write = ltq_wdt_write, ++ .unlocked_ioctl = ltq_wdt_ioctl, ++ .open = ltq_wdt_open, ++ .release = ltq_wdt_release, ++ .llseek = no_llseek, ++}; ++ ++static struct miscdevice ltq_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = <q_wdt_fops, ++}; ++ ++static int __init ++ltq_wdt_probe(struct platform_device *pdev) ++{ ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct clk *clk; ++ ++ if (!res) { ++ dev_err(&pdev->dev, "cannot obtain I/O memory region"); ++ return -ENOENT; ++ } ++ res = devm_request_mem_region(&pdev->dev, res->start, ++ resource_size(res), dev_name(&pdev->dev)); ++ if (!res) { ++ dev_err(&pdev->dev, "cannot request I/O memory region"); ++ return -EBUSY; ++ } ++ ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start, ++ resource_size(res)); ++ if (!ltq_wdt_membase) { ++ dev_err(&pdev->dev, "cannot remap I/O memory region\n"); ++ return -ENOMEM; ++ } ++ ++ /* we do not need to enable the clock as it is always running */ ++ clk = clk_get(&pdev->dev, "io"); ++ WARN_ON(!clk); ++ ltq_io_region_clk_rate = clk_get_rate(clk); ++ clk_put(clk); ++ ++ if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST) ++ ltq_wdt_bootstatus = WDIOF_CARDRESET; ++ ++ return misc_register(<q_wdt_miscdev); ++} ++ ++static int __devexit ++ltq_wdt_remove(struct platform_device *pdev) ++{ ++ misc_deregister(<q_wdt_miscdev); ++ ++ if (ltq_wdt_membase) ++ iounmap(ltq_wdt_membase); ++ ++ return 0; ++} ++ ++ ++static struct platform_driver ltq_wdt_driver = { ++ .remove = __devexit_p(ltq_wdt_remove), ++ .driver = { ++ .name = "ltq_wdt", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ++init_ltq_wdt(void) ++{ ++ return platform_driver_probe(<q_wdt_driver, ltq_wdt_probe); ++} ++ ++static void __exit ++exit_ltq_wdt(void) ++{ ++ return platform_driver_unregister(<q_wdt_driver); ++} ++ ++module_init(init_ltq_wdt); ++module_exit(exit_ltq_wdt); ++ ++module_param(nowayout, int, 0); ++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); ++ ++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); ++MODULE_DESCRIPTION("Lantiq SoC Watchdog"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |