1 files changed, 117 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts
new file mode 100644
index 0000000000..b2585cf5a7
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_siemens_gigaset-sx76x.dts
@@ -0,0 +1,117 @@
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
+	model = "Gigaset SX761,SX762,SX763";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpios {
+	status = "okay";
+};
+
+&gsw {
+	phy-mode = "rmii";
+};
+
+&localbus {
+	flash@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x2000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@10000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "firmware";
+				reg = <0x40000 0x7c0000>;
+			};
+		};
+	};
+
+	gpiomm: gpio@1 {
+		compatible = "lantiq,gpio-mm";
+		reg = <1 0x0 0x10 >;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		lantiq,shadow = <0x3>;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+	status = "okay";
+	gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};