diff options
Diffstat (limited to 'target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi')
-rw-r--r-- | target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi new file mode 100644 index 0000000000..9c1d2db8fa --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/mips/lantiq_rcu_gphy.h> + +/ { + compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_green; + led-dsl = &info_green; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + dect { + label = "dect"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_PHONE>; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WLAN>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + power_green: power { + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + power_red: power2 { + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + + info_green: info_green { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + + wifi: wifi { + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + info_red: info_red { + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + + dect: dect { + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&urlader 0xa91>; + mtd-mac-address-increment = <(-2)>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + }; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rmii"; + phy-handle = <&phy1>; + }; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + reg = <0>; + + phy0: ethernet-phy@0 { + reg = <0x00>; + compatible = "ethernet-phy-ieee802.3-c22"; + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + + phy1: ethernet-phy@1 { + reg = <0x01>; + compatible = "ethernet-phy-ieee802.3-c22"; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = <GPHY_MODE_GE>; +}; + +&gphy1 { + lantiq,gphy-mode = <GPHY_MODE_GE>; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; + }; + +}; + +&pcie0 { + status = "okay"; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <1>; + #address-cells = <2>; + device_type = "pci"; + + wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; |