diff options
Diffstat (limited to 'target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts')
-rw-r--r-- | target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts new file mode 100644 index 0000000000..5a2d867196 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +#include "danube.dtsi" + +/ { + compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube"; + model = "AudioCodes MediaPack MP-252"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + }; +}; + +&gsw { + phy-mode = "rmii"; +}; + +&localbus { + nor@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x20000>; + }; + + partition@40000 { + label = "boardconfig"; + reg = <0x40000 0x60000>; + read-only; + }; + + partition@a0000 { + label = "firmware"; + reg = <0xa0000 0xf20000>; + }; + + partition@fc0000 { + label = "sysconfig"; + reg = <0xfc0000 0x40000>; + }; + + partition@0x1000000 { + label = "rootfs_data"; + reg = <0x1000000 0x1000000>; + }; + }; + }; +}; + +&pci0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&vmmc { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; +}; |