diff options
Diffstat (limited to 'target/linux/lantiq/files-4.9/arch/mips/boot/dts/VR200v.dts')
| -rw-r--r-- | target/linux/lantiq/files-4.9/arch/mips/boot/dts/VR200v.dts | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/VR200v.dts deleted file mode 100644 index 6eccc5bdd9..0000000000 --- a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/VR200v.dts +++ /dev/null @@ -1,283 +0,0 @@ -/dts-v1/; - -#include "vr9.dtsi" - -#include <dt-bindings/input/input.h> - -/ { - compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9"; - model = "TP-LINK Archer VR200v"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - - led-dsl = &dsl; - led-internet = &internet; - led-usb = &usb; - led-usb2 = &usb; - }; - - memory@0 { - reg = <0x0 0x7f00000>; - }; - - fpi@10000000 { - gpio: pinmux@E100B10 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - mdio { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - gphy-leds { - lantiq,groups = "gphy0 led1", "gphy1 led1"; - lantiq,function = "gphy"; - lantiq,pull = <2>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - phy-rst { - lantiq,pins = "io42"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; - pins_spi_default: pins_spi_default { - spi_in { - lantiq,groups = "spi_di"; - lantiq,function = "spi"; - }; - spi_out { - lantiq,groups = "spi_do", "spi_clk", - "spi_cs4"; - lantiq,function = "spi"; - lantiq,output = <1>; - }; - }; - }; - - ifxhcd@E101000 { - status = "okay"; - gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; - lantiq,portmask = <0x3>; - }; - - ifxhcd@E106000 { - status = "okay"; - gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; - }; - - pci0: pci@E105400 { - status = "okay"; - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - }; - }; - - gphy-xrx200 { - compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/xrx200_phy11g_a22.bin"; - phys = [ 00 01 ]; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wifi { - label = "wifi"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_RFKILL>; - linux,input-type = <EV_SW>; - }; - - wps { - label = "wps"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - dect_paging { - label = "dect_paging"; - gpios = <&gpio 39 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PHONE>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - power: power { - label = "vr200v:blue:power"; - gpios = <&gpio 46 GPIO_ACTIVE_LOW>; - }; - dsl: dsl { - label = "vr200v:blue:dsl"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - internet: internet { - label = "vr200v:blue:internet"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - usb: usb { - label = "vr200v:blue:usb"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - }; - eth { - label = "vr200v:blue:lan"; - gpios = <&gpio 40 GPIO_ACTIVE_LOW>; - }; - wlan { - label = "vr200v:blue:wlan"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - wlan5g { - label = "vr200v:blue:wlan5g"; - gpios = <&gpio 20 GPIO_ACTIVE_LOW>; - }; - phone { - label = "vr200v:blue:phone"; - gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&spi { - pinctrl-names = "default"; - pinctrl-0 = <&pins_spi_default>; - - status = "ok"; - - m25p80@4 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <4 0>; - spi-max-frequency = <33250000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x20000>; - label = "u-boot"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0xf90000>; - label = "firmware"; - }; - - partition@fb0000 { - reg = <0xfb0000 0x10000>; - label = "radioDECT"; - read-only; - }; - - partition@fc0000 { - reg = <0xfc0000 0x10000>; - label = "config"; - read-only; - }; - - romfile: partition@fd0000 { - reg = <0xfd0000 0x10000>; - label = "romfile"; - read-only; - }; - - partition@fe0000 { - reg = <0xfe0000 0x10000>; - label = "rom"; - read-only; - }; - - partition@ff0000 { - reg = <0xff0000 0x10000>; - label = "radio"; - read-only; - }; - }; - }; -}; - -ð0 { - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&romfile 0xf100>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; |