1 files changed, 0 insertions, 196 deletions
diff --git a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.9/arch/mips/boot/dts/ARV7510PW22.dts
deleted file mode 100644
index dc3f614b9d..0000000000
--- a/target/linux/lantiq/files-4.9/arch/mips/boot/dts/ARV7510PW22.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
-	model = "Astoria Networks ARV7510PW22";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-
-		led-dsl = &internet;
-		led-usb = &umts;
-		led-wifi = &wlan;
-	};
-
-	memory@0 {
-		reg = <0x0 0x4000000>;
-	};
-
-	sram@1F000000 {
-		vmmc@107000 {
-			status = "okay";
-			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x1000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x40000>;
-						read-only;
-					};
-
-					partition@40000 {
-						label = "uboot_env";
-						reg = <0x40000 0x20000>;
-						read-only;
-					};
-
-					partition@60000 {
-						label = "firmware";
-						reg = <0x60000 0xf80000>;
-					};
-
-					boardconfig: partition@fe0000 {
-						label = "board_config";
-						reg = <0xfe0000 0x20000>;
-						read-only;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_in {
-					lantiq,groups = "req1", "req2";
-					lantiq,function = "pci";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-				pci_out {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-					lantiq,output = <1>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <2>;
-					lantiq,output = <1>;
-				};
-				pins_out {
-					lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
-					lantiq,output = <1>;
-				};
-				pins_in {
-					lantiq,pins = "io11", "io12", "io28";
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-					lantiq,output = <0>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		etop@E180000 {
-			/* Switch reset 19 */
-			phy-mode = "mii";
-			mtd-mac-address = <&boardconfig 0x16>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		restart {
-			label = "restart";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		power: power {
-			label = "power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		internet: internet {
-			label = "internet";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		wlan: wlan {
-			label = "wlan";
-			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
-		};
-		umts: 3g {
-			label = "3g";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-		};
-		message {
-			label = "message";
-			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-	lantiq,external-clock;
-	interrupt-map = <
-		0x7000 0 0 1 &icu0 30
-		0x7800 0 0 1 &icu0 135
-		0x7800 0 0 2 &icu0 135
-		0x7800 0 0 3 &icu0 135
-	>;
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	req-mask = <0x3>;
-
-	wifi@1814,3592 {
-		compatible = "pci1814,3592";
-		reg = <0x7000 0 0 0 0>;
-		ralink,mtd-eeprom = <&boardconfig 0x410>;
-		ralink,mtd-eeprom-swap;
-	};
-};