diff options
Diffstat (limited to 'target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts')
-rw-r--r-- | target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts deleted file mode 100644 index 66ff6f33d5..0000000000 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/danube_bt_homehub-v2b.dts +++ /dev/null @@ -1,238 +0,0 @@ -/dts-v1/; - -#include "danube.dtsi" - -#include <dt-bindings/input/input.h> - -/ { - compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube"; - model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */ - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_orange; - led-failsafe = &power_red; - led-running = &power_blue; - led-upgrade = &power_blue; - - led-dsl = &broadband_blue; - led-wifi = &wireless_blue; - }; - - memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ - device_type = "memory"; - reg = <0x0 0x4000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - findhandset { - label = "findhandset"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PHONE>; - }; - wps { - label = "wps"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - upgrading-orange { - label = "orange:upgrading"; - gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; - }; - - phone-orange { - label = "orange:phone"; - gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; - }; - phone-blue { - label = "blue:phone"; - gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; - }; - - wireless-orange { - label = "orange:wireless"; - gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; - }; - wireless_blue: wireless-blue { - label = "blue:wireless"; - gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; - }; - - broadband-red { - label = "red:broadband"; - gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; - }; - broadband-orange { - label = "orange:broadband"; - gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; - }; - broadband_blue: broadband-blue { - label = "blue:broadband"; - gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; - }; - - power_red: power-red { - label = "red:power"; - gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; - }; - power_orange: power-orange { - label = "orange:power"; - gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - power_blue: power-blue { - label = "blue:power"; - gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - exin { - lantiq,groups = "exin1"; - lantiq,function = "exin"; - }; - - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - }; - - btn_in { - lantiq,pins = "io2", "io15", "io22"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - }; -}; - -&gpios { - status = "okay"; -}; - -&gsw { - phy-mode = "rmii"; -}; - -&localbus { - flash@0 { /* NOR Flash: Spansion S29AL004D 512KB */ - compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */ - lantiq,cs = <0>; - bank-width = <2>; - reg = <0 0x0 0x80000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x40000>; /* 256KB */ - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x10000>; /* 64KB */ - }; - - partition@50000 { - label = "rg_conf_1"; - reg = <0x50000 0x10000>; - }; - - partition@60000 { - label = "rg_conf_2"; - reg = <0x60000 0x10000>; - }; - - partition@70000 { - label = "rg_conf_factory"; - reg = <0x70000 0x10000>; - }; - }; - }; - - flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <1 0x0 0x2000000 >; - req-mask = <0x1>; /* PCI request lines to mask during NAND access */ - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ath9k_cal: partition@0 { - label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */ - reg = <0x00000 0x4000>; - read-only; - }; - - partition@4000 { - label = "kernel"; - reg = <0x4000 0x200000>; - }; - - partition@164000 { - label = "ubi"; - reg = <0x204000 0x1dfc000>; - }; - }; - }; -}; - -&pci0 { - status = "okay"; - - pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>; - pinctrl-names = "default"; - - gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; - - wifi@168c,0027 { - compatible = "pci168c,0027"; - reg = <0x7000 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ - }; -}; - -&usb_phy { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&vmmc { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; -}; |