aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi')
-rw-r--r--target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi161
1 files changed, 79 insertions, 82 deletions
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi
index fb4486aca2..829e8c3d7e 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi
@@ -19,78 +19,10 @@
led-wifi = &wifi;
};
- sram@1F000000 {
- vmmc@107000 {
- status = "okay";
- gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
- &gpio 31 GPIO_ACTIVE_HIGH //still unknown
- &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
- };
- };
-
memory@0 {
reg = <0x0 0x4000000>;
};
- fpi@10000000 {
- localbus@0 {
- nor-boot@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
- };
-
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- gphy-leds {
- lantiq,groups = "gphy0 led0", "gphy0 led1",
- "gphy1 led0", "gphy1 led1";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- pci-rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
- };
-
- ifxhcd@E101000 {
- status = "okay";
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
- };
-
- pcie@d900000 {
- status = "disabled";
- };
- };
-
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
@@ -168,20 +100,6 @@
};
};
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@1814,3592 {
- compatible = "pci1814,3592";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
@@ -227,6 +145,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
+ reg = <0>;
phy1: ethernet-phy@1 {
reg = <0x1>;
@@ -251,3 +170,81 @@
};
};
};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ gphy-leds {
+ lantiq,groups = "gphy0 led0", "gphy0 led1",
+ "gphy1 led0", "gphy1 led1";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ pci-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&localbus {
+ nor@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boardconfig: partition@fe0000 {
+ label = "board_config";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&pcie0 {
+ status = "disabled";
+};
+
+&usb0 {
+ status = "okay";
+ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
+};