diff options
Diffstat (limited to 'target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts')
-rw-r--r-- | target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts | 201 |
1 files changed, 96 insertions, 105 deletions
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts index d37b9728d2..afb1b26c52 100644 --- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts @@ -25,111 +25,6 @@ reg = <0x0 0x4000000>; }; - sram@1F000000 { - vmmc@107000 { - status = "okay"; - gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; - }; - }; - - fpi@10000000 { - localbus@0 { - nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ - compatible = "lantiq,nand-xway"; - lantiq,cs = <1>; - bank-width = <2>; - reg = <1 0x0 0x2000000 >; - #address-cells = <1>; - #size-cells = <1>; - req-mask = <0x1>; /* PCI request lines to mask during NAND access */ - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "preboot"; - reg = <0x00000 0x8000>; - read-only; - }; - partition@8000 { - label = "u-boot"; - reg = <0x8000 0x05c000>; - read-only; - }; - partition@64000 { - label = "uboot_env"; - reg = <0x64000 0x004000>; - }; - ath9k_cal: partition@68000 { - label = "art-copy"; - reg = <0x68000 0x004000>; - }; - partition@6c000 { - label = "kernel"; - reg = <0x6c000 0x200000>; - }; - partition@26c000 { - label = "ubi"; - reg = <0x26c000 0x1d94000>; - }; - }; - }; - }; - - gpio: pinmux@E100B10 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - nand_out { - lantiq,groups = "nand cle", "nand ale"; - lantiq,function = "ebu"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - nand_cs1 { - lantiq,groups = "nand cs1"; - lantiq,function = "ebu"; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_in { - lantiq,groups = "req1"; - lantiq,function = "pci"; - lantiq,output = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - pci_out { - lantiq,groups = "gnt1"; - lantiq,function = "pci"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - lantiq,pull = <0>; - }; - - pci_rst { - lantiq,pins = "io21"; - lantiq,output = <1>; - lantiq,open-drain = <0>; - }; - }; - }; - - etop@E180000 { - phy-mode = "rgmii"; - }; - - ifxhcd@E101000 { - status = "okay"; - gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; - }; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -197,6 +92,97 @@ }; }; +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + nand_out { + lantiq,groups = "nand cle", "nand ale"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + nand_cs1 { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + }; + }; +}; + +&gsw { + phy-mode = "rgmii"; +}; + +&localbus { + nand@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000 >; + #address-cells = <1>; + #size-cells = <1>; + req-mask = <0x1>; /* PCI request lines to mask during NAND access */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preboot"; + reg = <0x00000 0x8000>; + read-only; + }; + partition@8000 { + label = "u-boot"; + reg = <0x8000 0x05c000>; + read-only; + }; + partition@64000 { + label = "uboot_env"; + reg = <0x64000 0x004000>; + }; + ath9k_cal: partition@68000 { + label = "art-copy"; + reg = <0x68000 0x004000>; + }; + partition@6c000 { + label = "kernel"; + reg = <0x6c000 0x200000>; + }; + partition@26c000 { + label = "ubi"; + reg = <0x26c000 0x1d94000>; + }; + }; + }; +}; + &pci0 { status = "okay"; gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; @@ -206,3 +192,8 @@ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ }; }; + +&usb0 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; +}; |