diff options
Diffstat (limited to 'target/linux/lantiq/files-3.3')
135 files changed, 63406 insertions, 0 deletions
diff --git a/target/linux/lantiq/files-3.3/arch/mips/configs/ase_defconfig b/target/linux/lantiq/files-3.3/arch/mips/configs/ase_defconfig new file mode 100644 index 0000000000..5bb1d93ebd --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/configs/ase_defconfig @@ -0,0 +1,67 @@ +CONFIG_LANTIQ=y +CONFIG_SOC_AMAZON_SE=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_EXPERIMENTAL=y +CONFIG_DEFAULT_HOSTNAME="amazon_se" +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 ++# CONFIG_RD_GZIP is not set +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_LANTIQ=y +CONFIG_MISC_DEVICES=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_LANTIQ_ETOP=y +CONFIG_PHYLIB=y +CONFIG_SERIAL_LANTIQ=y +CONFIG_PINCTRL=y +CONFIG_GPIO_SYSFS=y +CONFIG_WATCHDOG=y +CONFIG_LANTIQ_WDT=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y diff --git a/target/linux/lantiq/files-3.3/arch/mips/configs/falcon_defconfig b/target/linux/lantiq/files-3.3/arch/mips/configs/falcon_defconfig new file mode 100644 index 0000000000..ce242a88ed --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/configs/falcon_defconfig @@ -0,0 +1,72 @@ +CONFIG_LANTIQ=y +CONFIG_SOC_FALCON=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_EXPERIMENTAL=y +CONFIG_DEFAULT_HOSTNAME="falcon" +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 ++# CONFIG_RD_GZIP is not set +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_LANTIQ=y +CONFIG_MTD_M25P80=y +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT24=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SERIAL_LANTIQ=y +CONFIG_I2C=y +CONFIG_I2C_FALCON=y +CONFIG_SPI=y +CONFIG_SPI_FALCON=y +CONFIG_PINCTRL=y +CONFIG_GPIO_SYSFS=y +CONFIG_WATCHDOG=y +CONFIG_LANTIQ_WDT=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y diff --git a/target/linux/lantiq/files-3.3/arch/mips/configs/xway_defconfig b/target/linux/lantiq/files-3.3/arch/mips/configs/xway_defconfig new file mode 100644 index 0000000000..510a9641d3 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/configs/xway_defconfig @@ -0,0 +1,66 @@ +CONFIG_LANTIQ=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_EXPERIMENTAL=y +CONFIG_DEFAULT_HOSTNAME="danube" +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../root-lantiq/ ../root-lantiq/initramfs-base-files.txt" +CONFIG_INITRAMFS_ROOT_UID=1000 +CONFIG_INITRAMFS_ROOT_GID=1000 +# CONFIG_RD_GZIP is not set +CONFIG_RD_LZMA=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_DEFAULT_DEADLINE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +CONFIG_NETFILTER=y +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=y +CONFIG_NET_SCHED=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_LANTIQ=y +CONFIG_MISC_DEVICES=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_LANTIQ_ETOP=y +CONFIG_PHYLIB=y +CONFIG_SERIAL_LANTIQ=y +CONFIG_PINCTRL=y +CONFIG_GPIO_SYSFS=y +CONFIG_WATCHDOG=y +CONFIG_LANTIQ_WDT=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/clkdev.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/clkdev.h new file mode 100644 index 0000000000..262475414e --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/clkdev.h @@ -0,0 +1,25 @@ +/* + * based on arch/arm/include/asm/clkdev.h + * + * Copyright (C) 2008 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Helper for the clk API to assist looking up a struct clk. + */ +#ifndef __ASM_CLKDEV_H +#define __ASM_CLKDEV_H + +#include <linux/slab.h> + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) +{ + return kzalloc(size, GFP_KERNEL); +} + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h new file mode 100644 index 0000000000..adb531c39b --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-buttons.h @@ -0,0 +1,26 @@ +/* + * Lantiq GPIO button support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _LANTIQ_DEV_GPIO_BUTTONS_H +#define _LANTIQ_DEV_GPIO_BUTTONS_H + +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#define LTQ_KEYS_POLL_INTERVAL 20 /* msecs */ +#define LTQ_KEYS_DEBOUNCE_INTERVAL (3 * LTQ_KEYS_POLL_INTERVAL) + +void ltq_register_gpio_keys_polled(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons); + +#endif /* _LANTIQ_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h new file mode 100644 index 0000000000..d51e496d14 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/dev-gpio-leds.h @@ -0,0 +1,21 @@ +/* + * Lantiq GPIO LED device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _LANTIQ_DEV_LEDS_GPIO_H +#define _LANTIQ_DEV_LEDS_GPIO_H + +#include <linux/leds.h> + +void ltq_add_device_gpio_leds(int id, + unsigned num_leds, + struct gpio_led *leds) __init; + +#endif /* _LANTIQ_DEV_LEDS_GPIO_H */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h new file mode 100644 index 0000000000..4dc6466e84 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h @@ -0,0 +1,268 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + */ + +#ifndef _FALCON_IRQ__ +#define _FALCON_IRQ__ + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32) +#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32) +#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32) +#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define MIPS_CPU_TIMER_IRQ 7 + +/* HOST IF Event Interrupt */ +#define FALCON_IRQ_HOST (INT_NUM_IM0_IRL0 + 0) +/* HOST IF Mailbox0 Receive Interrupt */ +#define FALCON_IRQ_HOST_MB0_RX (INT_NUM_IM0_IRL0 + 1) +/* HOST IF Mailbox0 Transmit Interrupt */ +#define FALCON_IRQ_HOST_MB0_TX (INT_NUM_IM0_IRL0 + 2) +/* HOST IF Mailbox1 Receive Interrupt */ +#define FALCON_IRQ_HOST_MB1_RX (INT_NUM_IM0_IRL0 + 3) +/* HOST IF Mailbox1 Transmit Interrupt */ +#define FALCON_IRQ_HOST_MB1_TX (INT_NUM_IM0_IRL0 + 4) +/* I2C Last Single Data Transfer Request */ +#define FALCON_IRQ_I2C_LSREQ (INT_NUM_IM0_IRL0 + 8) +/* I2C Single Data Transfer Request */ +#define FALCON_IRQ_I2C_SREQ (INT_NUM_IM0_IRL0 + 9) +/* I2C Last Burst Data Transfer Request */ +#define FALCON_IRQ_I2C_LBREQ (INT_NUM_IM0_IRL0 + 10) +/* I2C Burst Data Transfer Request */ +#define FALCON_IRQ_I2C_BREQ (INT_NUM_IM0_IRL0 + 11) +/* I2C Error Interrupt */ +#define FALCON_IRQ_I2C_I2C_ERR (INT_NUM_IM0_IRL0 + 12) +/* I2C Protocol Interrupt */ +#define FALCON_IRQ_I2C_I2C_P (INT_NUM_IM0_IRL0 + 13) +/* SSC Transmit Interrupt */ +#define FALCON_IRQ_SSC_T (INT_NUM_IM0_IRL0 + 14) +/* SSC Receive Interrupt */ +#define FALCON_IRQ_SSC_R (INT_NUM_IM0_IRL0 + 15) +/* SSC Error Interrupt */ +#define FALCON_IRQ_SSC_E (INT_NUM_IM0_IRL0 + 16) +/* SSC Frame Interrupt */ +#define FALCON_IRQ_SSC_F (INT_NUM_IM0_IRL0 + 17) +/* Advanced Encryption Standard Interrupt */ +#define FALCON_IRQ_AES_AES (INT_NUM_IM0_IRL0 + 27) +/* Secure Hash Algorithm Interrupt */ +#define FALCON_IRQ_SHA_HASH (INT_NUM_IM0_IRL0 + 28) +/* PCM Receive Interrupt */ +#define FALCON_IRQ_PCM_RX (INT_NUM_IM0_IRL0 + 29) +/* PCM Transmit Interrupt */ +#define FALCON_IRQ_PCM_TX (INT_NUM_IM0_IRL0 + 30) +/* PCM Transmit Crash Interrupt */ +#define FALCON_IRQ_PCM_HW2_CRASH (INT_NUM_IM0_IRL0 + 31) + +/* EBU Serial Flash Command Error */ +#define FALCON_IRQ_EBU_SF_CMDERR (INT_NUM_IM1_IRL0 + 0) +/* EBU Serial Flash Command Overwrite Error */ +#define FALCON_IRQ_EBU_SF_COVERR (INT_NUM_IM1_IRL0 + 1) +/* EBU Serial Flash Busy */ +#define FALCON_IRQ_EBU_SF_BUSY (INT_NUM_IM1_IRL0 + 2) +/* External Interrupt from GPIO P0 */ +#define FALCON_IRQ_GPIO_P0 (INT_NUM_IM1_IRL0 + 4) +/* External Interrupt from GPIO P1 */ +#define FALCON_IRQ_GPIO_P1 (INT_NUM_IM1_IRL0 + 5) +/* External Interrupt from GPIO P2 */ +#define FALCON_IRQ_GPIO_P2 (INT_NUM_IM1_IRL0 + 6) +/* External Interrupt from GPIO P3 */ +#define FALCON_IRQ_GPIO_P3 (INT_NUM_IM1_IRL0 + 7) +/* External Interrupt from GPIO P4 */ +#define FALCON_IRQ_GPIO_P4 (INT_NUM_IM1_IRL0 + 8) +/* 8kHz backup interrupt derived from core-PLL */ +#define FALCON_IRQ_FSC_BKP (INT_NUM_IM1_IRL0 + 10) +/* FSC Timer Interrupt 0 */ +#define FALCON_IRQ_FSCT_CMP0 (INT_NUM_IM1_IRL0 + 11) +/* FSC Timer Interrupt 1 */ +#define FALCON_IRQ_FSCT_CMP1 (INT_NUM_IM1_IRL0 + 12) +/* 8kHz root interrupt derived from GPON interface */ +#define FALCON_IRQ_FSC_ROOT (INT_NUM_IM1_IRL0 + 13) +/* Time of Day */ +#define FALCON_IRQ_TOD (INT_NUM_IM1_IRL0 + 14) +/* PMA Interrupt from IntNode of the 200MHz Domain */ +#define FALCON_IRQ_PMA_200M (INT_NUM_IM1_IRL0 + 15) +/* PMA Interrupt from IntNode of the TX Clk Domain */ +#define FALCON_IRQ_PMA_TX (INT_NUM_IM1_IRL0 + 16) +/* PMA Interrupt from IntNode of the RX Clk Domain */ +#define FALCON_IRQ_PMA_RX (INT_NUM_IM1_IRL0 + 17) +/* SYS1 Interrupt */ +#define FALCON_IRQ_SYS1 (INT_NUM_IM1_IRL0 + 20) +/* SYS GPE Interrupt */ +#define FALCON_IRQ_SYS_GPE (INT_NUM_IM1_IRL0 + 21) +/* Watchdog Access Error Interrupt */ +#define FALCON_IRQ_WDT_AEIR (INT_NUM_IM1_IRL0 + 24) +/* Watchdog Prewarning Interrupt */ +#define FALCON_IRQ_WDT_PIR (INT_NUM_IM1_IRL0 + 25) +/* SBIU interrupt */ +#define FALCON_IRQ_SBIU0 (INT_NUM_IM1_IRL0 + 27) +/* FPI Bus Control Unit Interrupt */ +#define FALCON_IRQ_BCU0 (INT_NUM_IM1_IRL0 + 29) +/* DDR Controller Interrupt */ +#define FALCON_IRQ_DDR (INT_NUM_IM1_IRL0 + 30) +/* Crossbar Error Interrupt */ +#define FALCON_IRQ_XBAR_ERROR (INT_NUM_IM1_IRL0 + 31) + +/* ICTRLL 0 Interrupt */ +#define FALCON_IRQ_ICTRLL0 (INT_NUM_IM2_IRL0 + 0) +/* ICTRLL 1 Interrupt */ +#define FALCON_IRQ_ICTRLL1 (INT_NUM_IM2_IRL0 + 1) +/* ICTRLL 2 Interrupt */ +#define FALCON_IRQ_ICTRLL2 (INT_NUM_IM2_IRL0 + 2) +/* ICTRLL 3 Interrupt */ +#define FALCON_IRQ_ICTRLL3 (INT_NUM_IM2_IRL0 + 3) +/* OCTRLL 0 Interrupt */ +#define FALCON_IRQ_OCTRLL0 (INT_NUM_IM2_IRL0 + 4) +/* OCTRLL 1 Interrupt */ +#define FALCON_IRQ_OCTRLL1 (INT_NUM_IM2_IRL0 + 5) +/* OCTRLL 2 Interrupt */ +#define FALCON_IRQ_OCTRLL2 (INT_NUM_IM2_IRL0 + 6) +/* OCTRLL 3 Interrupt */ +#define FALCON_IRQ_OCTRLL3 (INT_NUM_IM2_IRL0 + 7) +/* OCTRLG Interrupt */ +#define FALCON_IRQ_OCTRLG (INT_NUM_IM2_IRL0 + 9) +/* IQM Interrupt */ +#define FALCON_IRQ_IQM (INT_NUM_IM2_IRL0 + 10) +/* FSQM Interrupt */ +#define FALCON_IRQ_FSQM (INT_NUM_IM2_IRL0 + 11) +/* TMU Interrupt */ +#define FALCON_IRQ_TMU (INT_NUM_IM2_IRL0 + 12) +/* LINK1 Interrupt */ +#define FALCON_IRQ_LINK1 (INT_NUM_IM2_IRL0 + 14) +/* ICTRLC 0 Interrupt */ +#define FALCON_IRQ_ICTRLC0 (INT_NUM_IM2_IRL0 + 16) +/* ICTRLC 1 Interrupt */ +#define FALCON_IRQ_ICTRLC1 (INT_NUM_IM2_IRL0 + 17) +/* OCTRLC Interrupt */ +#define FALCON_IRQ_OCTRLC (INT_NUM_IM2_IRL0 + 18) +/* CONFIG Break Interrupt */ +#define FALCON_IRQ_CONFIG_BREAK (INT_NUM_IM2_IRL0 + 19) +/* CONFIG Interrupt */ +#define FALCON_IRQ_CONFIG (INT_NUM_IM2_IRL0 + 20) +/* Dispatcher Interrupt */ +#define FALCON_IRQ_DISP (INT_NUM_IM2_IRL0 + 21) +/* TBM Interrupt */ +#define FALCON_IRQ_TBM (INT_NUM_IM2_IRL0 + 22) +/* GTC Downstream Interrupt */ +#define FALCON_IRQ_GTC_DS (INT_NUM_IM2_IRL0 + 29) +/* GTC Upstream Interrupt */ +#define FALCON_IRQ_GTC_US (INT_NUM_IM2_IRL0 + 30) +/* EIM Interrupt */ +#define FALCON_IRQ_EIM (INT_NUM_IM2_IRL0 + 31) + +/* ASC0 Transmit Interrupt */ +#define FALCON_IRQ_ASC0_T (INT_NUM_IM3_IRL0 + 0) +/* ASC0 Receive Interrupt */ +#define FALCON_IRQ_ASC0_R (INT_NUM_IM3_IRL0 + 1) +/* ASC0 Error Interrupt */ +#define FALCON_IRQ_ASC0_E (INT_NUM_IM3_IRL0 + 2) +/* ASC0 Transmit Buffer Interrupt */ +#define FALCON_IRQ_ASC0_TB (INT_NUM_IM3_IRL0 + 3) +/* ASC0 Autobaud Start Interrupt */ +#define FALCON_IRQ_ASC0_ABST (INT_NUM_IM3_IRL0 + 4) +/* ASC0 Autobaud Detection Interrupt */ +#define FALCON_IRQ_ASC0_ABDET (INT_NUM_IM3_IRL0 + 5) +/* ASC1 Modem Status Interrupt */ +#define FALCON_IRQ_ASC0_MS (INT_NUM_IM3_IRL0 + 6) +/* ASC0 Soft Flow Control Interrupt */ +#define FALCON_IRQ_ASC0_SFC (INT_NUM_IM3_IRL0 + 7) +/* ASC1 Transmit Interrupt */ +#define FALCON_IRQ_ASC1_T (INT_NUM_IM3_IRL0 + 8) +/* ASC1 Receive Interrupt */ +#define FALCON_IRQ_ASC1_R (INT_NUM_IM3_IRL0 + 9) +/* ASC1 Error Interrupt */ +#define FALCON_IRQ_ASC1_E (INT_NUM_IM3_IRL0 + 10) +/* ASC1 Transmit Buffer Interrupt */ +#define FALCON_IRQ_ASC1_TB (INT_NUM_IM3_IRL0 + 11) +/* ASC1 Autobaud Start Interrupt */ +#define FALCON_IRQ_ASC1_ABST (INT_NUM_IM3_IRL0 + 12) +/* ASC1 Autobaud Detection Interrupt */ +#define FALCON_IRQ_ASC1_ABDET (INT_NUM_IM3_IRL0 + 13) +/* ASC1 Modem Status Interrupt */ +#define FALCON_IRQ_ASC1_MS (INT_NUM_IM3_IRL0 + 14) +/* ASC1 Soft Flow Control Interrupt */ +#define FALCON_IRQ_ASC1_SFC (INT_NUM_IM3_IRL0 + 15) +/* GPTC Timer/Counter 1A Interrupt */ +#define FALCON_IRQ_GPTC_TC1A (INT_NUM_IM3_IRL0 + 16) +/* GPTC Timer/Counter 1B Interrupt */ +#define FALCON_IRQ_GPTC_TC1B (INT_NUM_IM3_IRL0 + 17) +/* GPTC Timer/Counter 2A Interrupt */ +#define FALCON_IRQ_GPTC_TC2A (INT_NUM_IM3_IRL0 + 18) +/* GPTC Timer/Counter 2B Interrupt */ +#define FALCON_IRQ_GPTC_TC2B (INT_NUM_IM3_IRL0 + 19) +/* GPTC Timer/Counter 3A Interrupt */ +#define FALCON_IRQ_GPTC_TC3A (INT_NUM_IM3_IRL0 + 20) +/* GPTC Timer/Counter 3B Interrupt */ +#define FALCON_IRQ_GPTC_TC3B (INT_NUM_IM3_IRL0 + 21) +/* DFEV0, Channel 1 Transmit Interrupt */ +#define FALCON_IRQ_DFEV0_2TX (INT_NUM_IM3_IRL0 + 26) +/* DFEV0, Channel 1 Receive Interrupt */ +#define FALCON_IRQ_DFEV0_2RX (INT_NUM_IM3_IRL0 + 27) +/* DFEV0, Channel 1 General Purpose Interrupt */ +#define FALCON_IRQ_DFEV0_2GP (INT_NUM_IM3_IRL0 + 28) +/* DFEV0, Channel 0 Transmit Interrupt */ +#define FALCON_IRQ_DFEV0_1TX (INT_NUM_IM3_IRL0 + 29) +/* DFEV0, Channel 0 Receive Interrupt */ +#define FALCON_IRQ_DFEV0_1RX (INT_NUM_IM3_IRL0 + 30) +/* DFEV0, Channel 0 General Purpose Interrupt */ +#define FALCON_IRQ_DFEV0_1GP (INT_NUM_IM3_IRL0 + 31) + +/* ICTRLL 0 Error */ +#define FALCON_IRQ_ICTRLL0_ERR (INT_NUM_IM4_IRL0 + 0) +/* ICTRLL 1 Error */ +#define FALCON_IRQ_ICTRLL1_ERR (INT_NUM_IM4_IRL0 + 1) +/* ICTRLL 2 Error */ +#define FALCON_IRQ_ICTRLL2_ERR (INT_NUM_IM4_IRL0 + 2) +/* ICTRLL 3 Error */ +#define FALCON_IRQ_ICTRLL3_ERR (INT_NUM_IM4_IRL0 + 3) +/* OCTRLL 0 Error */ +#define FALCON_IRQ_OCTRLL0_ERR (INT_NUM_IM4_IRL0 + 4) +/* OCTRLL 1 Error */ +#define FALCON_IRQ_OCTRLL1_ERR (INT_NUM_IM4_IRL0 + 5) +/* OCTRLL 2 Error */ +#define FALCON_IRQ_OCTRLL2_ERR (INT_NUM_IM4_IRL0 + 6) +/* OCTRLL 3 Error */ +#define FALCON_IRQ_OCTRLL3_ERR (INT_NUM_IM4_IRL0 + 7) +/* ICTRLG Error */ +#define FALCON_IRQ_ICTRLG_ERR (INT_NUM_IM4_IRL0 + 8) +/* OCTRLG Error */ +#define FALCON_IRQ_OCTRLG_ERR (INT_NUM_IM4_IRL0 + 9) +/* IQM Error */ +#define FALCON_IRQ_IQM_ERR (INT_NUM_IM4_IRL0 + 10) +/* FSQM Error */ +#define FALCON_IRQ_FSQM_ERR (INT_NUM_IM4_IRL0 + 11) +/* TMU Error */ +#define FALCON_IRQ_TMU_ERR (INT_NUM_IM4_IRL0 + 12) +/* MPS Status Interrupt #0 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR0 (INT_NUM_IM4_IRL0 + 14) +/* MPS Status Interrupt #1 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR1 (INT_NUM_IM4_IRL0 + 15) +/* MPS Status Interrupt #2 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR2 (INT_NUM_IM4_IRL0 + 16) +/* MPS Status Interrupt #3 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR3 (INT_NUM_IM4_IRL0 + 17) +/* MPS Status Interrupt #4 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR4 (INT_NUM_IM4_IRL0 + 18) +/* MPS Status Interrupt #5 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR5 (INT_NUM_IM4_IRL0 + 19) +/* MPS Status Interrupt #6 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR6 (INT_NUM_IM4_IRL0 + 20) +/* MPS Status Interrupt #7 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR7 (INT_NUM_IM4_IRL0 + 21) +/* MPS Status Interrupt #8 (VPE1 to VPE0) */ +#define FALCON_IRQ_MPS_IR8 (INT_NUM_IM4_IRL0 + 22) +/* VPE0 Exception Level Flag Interrupt */ +#define FALCON_IRQ_VPE0_EXL (INT_NUM_IM4_IRL0 + 29) +/* VPE0 Error Level Flag Interrupt */ +#define FALCON_IRQ_VPE0_ERL (INT_NUM_IM4_IRL0 + 30) +/* VPE0 Performance Monitoring Counter Interrupt */ +#define FALCON_IRQ_VPE0_PMCIR (INT_NUM_IM4_IRL0 + 31) + +#endif /* _FALCON_IRQ__ */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/irq.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/irq.h new file mode 100644 index 0000000000..2caccd9f9d --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/irq.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + */ + +#ifndef __FALCON_IRQ_H +#define __FALCON_IRQ_H + +#include <falcon_irq.h> + +#define NR_IRQS 328 + +#include_next <irq.h> + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h new file mode 100644 index 0000000000..fff5ecdbea --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h @@ -0,0 +1,152 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_FALCON_H__ +#define _LTQ_FALCON_H__ + +#ifdef CONFIG_SOC_FALCON + +#include <lantiq.h> + +/* Chip IDs */ +#define SOC_ID_FALCON 0x01B8 + +/* SoC Types */ +#define SOC_TYPE_FALCON 0x01 + +/* ASC0/1 - serial port */ +#define LTQ_ASC0_BASE_ADDR 0x1E100C00 +#define LTQ_ASC1_BASE_ADDR 0x1E100B00 +#define LTQ_ASC_SIZE 0x100 + +#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8)) +#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1) +#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2) + +/* + * during early_printk no ioremap possible at this early stage + * lets use KSEG1 instead + */ +#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR) + +/* ICU - interrupt control unit */ +#define LTQ_ICU_BASE_ADDR 0x1F880200 +#define LTQ_ICU_SIZE 0x100 + +/* WDT */ +#define LTQ_WDT_BASE_ADDR 0x1F8803F0 +#define LTQ_WDT_SIZE 0x10 + +#define LTQ_RST_CAUSE_WDTRST 0x0002 + +/* EBU - external bus unit */ +#define LTQ_EBU_BASE_ADDR 0x18000000 +#define LTQ_EBU_SIZE 0x0100 + +#define LTQ_EBU_MODCON 0x000C + +/* GPIO */ +#define LTQ_GPIO0_BASE_ADDR 0x1D810000 +#define LTQ_GPIO0_SIZE 0x0080 +#define LTQ_GPIO1_BASE_ADDR 0x1E800100 +#define LTQ_GPIO1_SIZE 0x0080 +#define LTQ_GPIO2_BASE_ADDR 0x1D810100 +#define LTQ_GPIO2_SIZE 0x0080 +#define LTQ_GPIO3_BASE_ADDR 0x1E800200 +#define LTQ_GPIO3_SIZE 0x0080 +#define LTQ_GPIO4_BASE_ADDR 0x1E800300 +#define LTQ_GPIO4_SIZE 0x0080 +#define LTQ_PADCTRL0_BASE_ADDR 0x1DB01000 +#define LTQ_PADCTRL0_SIZE 0x0100 +#define LTQ_PADCTRL1_BASE_ADDR 0x1E800400 +#define LTQ_PADCTRL1_SIZE 0x0100 +#define LTQ_PADCTRL2_BASE_ADDR 0x1DB02000 +#define LTQ_PADCTRL2_SIZE 0x0100 +#define LTQ_PADCTRL3_BASE_ADDR 0x1E800500 +#define LTQ_PADCTRL3_SIZE 0x0100 +#define LTQ_PADCTRL4_BASE_ADDR 0x1E800600 +#define LTQ_PADCTRL4_SIZE 0x0100 + +/* I2C */ +#define GPON_I2C_BASE 0x1E200000 +#define GPON_I2C_SIZE 0x00010000 + +/* CHIP ID */ +#define LTQ_STATUS_BASE_ADDR 0x1E802000 + +#define LTQ_FALCON_CHIPID ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c)) +#define LTQ_FALCON_CHIPTYPE ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38)) +#define LTQ_FALCON_CHIPCONF ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40)) + +/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */ +#define LTQ_SYS1_BASE_ADDR 0x1EF00000 +#define LTQ_SYS1_SIZE 0x0100 +#define LTQ_STATUS_BASE_ADDR 0x1E802000 +#define LTQ_STATUS_SIZE 0x0080 +#define LTQ_SYS_ETH_BASE_ADDR 0x1DB00000 +#define LTQ_SYS_ETH_SIZE 0x0100 +#define LTQ_SYS_GPE_BASE_ADDR 0x1D700000 +#define LTQ_SYS_GPE_SIZE 0x0100 + +#define SYSCTL_SYS1 0 +#define SYSCTL_SYSETH 1 +#define SYSCTL_SYSGPE 2 + +/* Activation Status Register */ +#define ACTS_ASC1_ACT 0x00000800 +#define ACTS_I2C_ACT 0x00004000 +#define ACTS_P0 0x00010000 +#define ACTS_P1 0x00010000 +#define ACTS_P2 0x00020000 +#define ACTS_P3 0x00020000 +#define ACTS_P4 0x00040000 +#define ACTS_PADCTRL0 0x00100000 +#define ACTS_PADCTRL1 0x00100000 +#define ACTS_PADCTRL2 0x00200000 +#define ACTS_PADCTRL3 0x00200000 +#define ACTS_PADCTRL4 0x00400000 +#define ACTS_I2C_ACT 0x00004000 + +/* global register ranges */ +extern __iomem void *ltq_ebu_membase; +extern __iomem void *ltq_sys1_membase; +#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) +#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) +#define ltq_ebu_w32_mask(clear, set, reg) \ + ltq_ebu_w32((ltq_ebu_r32(reg) & ~(clear)) | (set), reg) + +#define ltq_sys1_w32(x, y) ltq_w32((x), ltq_sys1_membase + (y)) +#define ltq_sys1_r32(x) ltq_r32(ltq_sys1_membase + (x)) +#define ltq_sys1_w32_mask(clear, set, reg) \ + ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg) + +/* gpio wrapper to help configure the pin muxing */ +extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux); + +/* to keep the irq code generic we need to define these to 0 as falcon + has no EIU/EBU */ +#define LTQ_EIU_BASE_ADDR 0 +#define LTQ_EBU_PCC_ISTAT 0 + +static inline int ltq_is_ar9(void) +{ + return 0; +} + +static inline int ltq_is_vr9(void) +{ + return 0; +} + +static inline int ltq_is_falcon(void) +{ + return 1; +} + +#endif /* CONFIG_SOC_FALCON */ +#endif /* _LTQ_XWAY_H__ */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/lantiq_timer.h new file mode 100644 index 0000000000..ef564abc3a --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/lantiq_timer.h @@ -0,0 +1,155 @@ +#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ +#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ + + +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ + + +/* + * #################################### + * Definition + * #################################### + */ + +/* + * Available Timer/Counter Index + */ +#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) +#define TIMER_ANY 0x00 +#define TIMER1A TIMER(1, 0) +#define TIMER1B TIMER(1, 1) +#define TIMER2A TIMER(2, 0) +#define TIMER2B TIMER(2, 1) +#define TIMER3A TIMER(3, 0) +#define TIMER3B TIMER(3, 1) + +/* + * Flag of Timer/Counter + * These flags specify the way in which timer is configured. + */ +/* Bit size of timer/counter. */ +#define TIMER_FLAG_16BIT 0x0000 +#define TIMER_FLAG_32BIT 0x0001 +/* Switch between timer and counter. */ +#define TIMER_FLAG_TIMER 0x0000 +#define TIMER_FLAG_COUNTER 0x0002 +/* Stop or continue when overflowing/underflowing. */ +#define TIMER_FLAG_ONCE 0x0000 +#define TIMER_FLAG_CYCLIC 0x0004 +/* Count up or counter down. */ +#define TIMER_FLAG_UP 0x0000 +#define TIMER_FLAG_DOWN 0x0008 +/* Count on specific level or edge. */ +#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 +#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 +#define TIMER_FLAG_RISE_EDGE 0x0010 +#define TIMER_FLAG_FALL_EDGE 0x0020 +#define TIMER_FLAG_ANY_EDGE 0x0030 +/* Signal is syncronous to module clock or not. */ +#define TIMER_FLAG_UNSYNC 0x0000 +#define TIMER_FLAG_SYNC 0x0080 +/* Different interrupt handle type. */ +#define TIMER_FLAG_NO_HANDLE 0x0000 +#if defined(__KERNEL__) + #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 +#endif // defined(__KERNEL__) +#define TIMER_FLAG_SIGNAL 0x0300 +/* Internal clock source or external clock source */ +#define TIMER_FLAG_INT_SRC 0x0000 +#define TIMER_FLAG_EXT_SRC 0x1000 + + +/* + * ioctl Command + */ +#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ +#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ +#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ +#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ +#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ +#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ +#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ +#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ + +/* + * Data Type Used to Call ioctl + */ +struct gptu_ioctl_param { + unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * + * GPTU_SET_COUNTER, this field is ID of expected * + * timer/counter. If it's zero, a timer/counter would * + * be dynamically allocated and ID would be stored in * + * this field. * + * In command GPTU_GET_COUNT_VALUE, this field is * + * ignored. * + * In other command, this field is ID of timer/counter * + * allocated. */ + unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * + * GPTU_SET_COUNTER, this field contains flags to * + * specify how to configure timer/counter. * + * In command GPTU_START_TIMER, zero indicate start * + * and non-zero indicate resume timer/counter. * + * In other command, this field is ignored. */ + unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * + * init/reload value. * + * In command GPTU_SET_TIMER, this field contains * + * frequency (0.001Hz) of timer. * + * In command GPTU_GET_COUNT_VALUE, current count * + * value would be stored in this field. * + * In command GPTU_CALCULATE_DIVIDER, this field * + * contains frequency wanted, and after calculation, * + * divider would be stored in this field to overwrite * + * the frequency. * + * In other command, this field is ignored. */ + int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * + * if signal is required, this field contains process * + * ID to which signal would be sent. * + * In other command, this field is ignored. */ + int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * + * if signal is required, this field contains signal * + * number which would be sent. * + * In other command, this field is ignored. */ +}; + +/* + * #################################### + * Data Type + * #################################### + */ +typedef void (*timer_callback)(unsigned long arg); + +extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); +extern int lq_free_timer(unsigned int); +extern int lq_start_timer(unsigned int, int); +extern int lq_stop_timer(unsigned int); +extern int lq_reset_counter_flags(u32 timer, u32 flags); +extern int lq_get_count_value(unsigned int, unsigned long *); +extern u32 lq_cal_divider(unsigned long); +extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); +extern int lq_set_counter(unsigned int timer, unsigned int flag, + u32 reload, unsigned long arg1, unsigned long arg2); + +#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/base_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/base_reg.h new file mode 100644 index 0000000000..8149f1204e --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/base_reg.h @@ -0,0 +1,56 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __BASE_REG_H +#define __BASE_REG_H + +#ifndef KSEG1 +#define KSEG1 0xA0000000 +#endif + +#define LTQ_EBU_SEG1_BASE (KSEG1 + 0x10000000) +#define LTQ_EBU_SEG2_BASE (KSEG1 + 0x11000000) +#define LTQ_EBU_SEG3_BASE (KSEG1 + 0x12000000) +#define LTQ_EBU_SEG4_BASE (KSEG1 + 0x13000000) + +#define LTQ_ASC0_BASE (KSEG1 + 0x14100100) +#define LTQ_ASC1_BASE (KSEG1 + 0x14100200) + +#define LTQ_SSC0_BASE (0x14100300) +#define LTQ_SSC1_BASE (0x14100400) + +#define LTQ_PORT_P0_BASE (KSEG1 + 0x14100600) +#define LTQ_PORT_P1_BASE (KSEG1 + 0x14108100) +#define LTQ_PORT_P2_BASE (KSEG1 + 0x14100800) +#define LTQ_PORT_P3_BASE (KSEG1 + 0x14100900) +#define LTQ_PORT_P4_BASE (KSEG1 + 0x1E000400) + +#define LTQ_EBU_BASE (KSEG1 + 0x14102000) +#define LTQ_DMA_BASE (KSEG1 + 0x14104000) + +#define LTQ_ICU0_IM3_IM2_BASE (KSEG1 + 0x1E016000) +#define LTQ_ICU0_IM5_IM4_IM1_IM0_BASE (KSEG1 + 0x14106000) + +#define LTQ_ES_BASE (KSEG1 + 0x18000000) + +#define LTQ_SYS0_BASE (KSEG1 + 0x1C000000) +#define LTQ_SYS1_BASE (KSEG1 + 0x1C000800) +#define LTQ_SYS2_BASE (KSEG1 + 0x1E400000) + +#define LTQ_L2_SPRAM_BASE (KSEG1 + 0x1F1E8000) + +#define LTQ_SWINT_BASE (KSEG1 + 0x1E000100) +#define LTQ_MBS_BASE (KSEG1 + 0x1E000200) + +#define LTQ_STATUS_BASE (KSEG1 + 0x1E000500) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h new file mode 100644 index 0000000000..9c33516e8a --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/boot_reg.h @@ -0,0 +1,37 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + +******************************************************************************/ + +#ifndef __BOOT_REG_H +#define __BOOT_REG_H + +#define LTQ_BOOT_CPU_OFFSET 0x20 + +#define LTQ_BOOT_RVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x00) +#define LTQ_BOOT_NVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x04) +#define LTQ_BOOT_EVEC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x08) +#define LTQ_BOOT_CP0_STATUS(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x0C) +#define LTQ_BOOT_CP0_EPC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x10) +#define LTQ_BOOT_CP0_EEPC(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x14) +#define LTQ_BOOT_SIZE(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x18) /* only for CP1 */ +#define LTQ_BOOT_RCU_SR(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x18) /* only for CP0 */ +#define LTQ_BOOT_CFG_STAT(cpu) (volatile u32*)(LTQ_L2_SPRAM_BASE + \ + (cpu * LTQ_BOOT_CPU_OFFSET) + 0x1C) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h new file mode 100644 index 0000000000..9fde2f6dd3 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/dma_reg.h @@ -0,0 +1,308 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __DMA_REG_H +#define __DMA_REG_H + +#define dma_r32(reg) ltq_r32(&dma->reg) +#define dma_w32(val, reg) ltq_w32(val, &dma->reg) +#define dma_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &dma->reg) + +/** DMA register structure */ +struct svip_reg_dma { + volatile unsigned long clc; /* 0x00 */ + volatile unsigned long reserved0; /* 0x04 */ + volatile unsigned long id; /* 0x08 */ + volatile unsigned long reserved1; /* 0x0c */ + volatile unsigned long ctrl; /* 0x10 */ + volatile unsigned long cpoll; /* 0x14 */ + volatile unsigned long cs; /* 0x18 */ + volatile unsigned long cctrl; /* 0x1C */ + volatile unsigned long cdba; /* 0x20 */ + volatile unsigned long cdlen; /* 0x24 */ + volatile unsigned long cis; /* 0x28 */ + volatile unsigned long cie; /* 0x2C */ + volatile unsigned long cgbl; /* 0x30 */ + volatile unsigned long reserved2[3]; /* 0x34 */ + volatile unsigned long ps; /* 0x40 */ + volatile unsigned long pctrl; /* 0x44 */ + volatile unsigned long reserved3[43]; /* 0x48 */ + volatile unsigned long irnen; /* 0xF4 */ + volatile unsigned long irncr; /* 0xF8 */ + volatile unsigned long irnicr; /* 0xFC */ +}; + +/******************************************************************************* + * CLC Register + ******************************************************************************/ + +/* Fast Shut-Off Enable Bit (5) */ +#define DMA_CLC_FSOE (0x1 << 5) +#define DMA_CLC_FSOE_VAL(val) (((val) & 0x1) << 5) +#define DMA_CLC_FSOE_GET(val) ((((val) & DMA_CLC_FSOE) >> 5) & 0x1) +#define DMA_CLC_FSOE_SET(reg,val) (reg) = ((reg & ~DMA_CLC_FSOE) | (((val) & 0x1) << 5)) +/* Suspend Bit Write Enable for OCDS (4) */ +#define DMA_CLC_SBWE (0x1 << 4) +#define DMA_CLC_SBWE_VAL(val) (((val) & 0x1) << 4) +#define DMA_CLC_SBWE_SET(reg,val) (reg) = (((reg & ~DMA_CLC_SBWE) | (val) & 1) << 4) +/* External Request Disable (3) */ +#define DMA_CLC_EDIS (0x1 << 3) +#define DMA_CLC_EDIS_VAL(val) (((val) & 0x1) << 3) +#define DMA_CLC_EDIS_GET(val) ((((val) & DMA_CLC_EDIS) >> 3) & 0x1) +#define DMA_CLC_EDIS_SET(reg,val) (reg) = ((reg & ~DMA_CLC_EDIS) | (((val) & 0x1) << 3)) +/* Suspend Enable Bit for OCDS (2) */ +#define DMA_CLC_SPEN (0x1 << 2) +#define DMA_CLC_SPEN_VAL(val) (((val) & 0x1) << 2) +#define DMA_CLC_SPEN_GET(val) ((((val) & DMA_CLC_SPEN) >> 2) & 0x1) +#define DMA_CLC_SPEN_SET(reg,val) (reg) = ((reg & ~DMA_CLC_SPEN) | (((val) & 0x1) << 2)) +/* Disable Status Bit (1) */ +#define DMA_CLC_DISS (0x1 << 1) +#define DMA_CLC_DISS_GET(val) ((((val) & DMA_CLC_DISS) >> 1) & 0x1) +/* Disable Request Bit (0) */ +#define DMA_CLC_DISR (0x1) +#define DMA_CLC_DISR_VAL(val) (((val) & 0x1) << 0) +#define DMA_CLC_DISR_GET(val) ((((val) & DMA_CLC_DISR) >> 0) & 0x1) +#define DMA_CLC_DISR_SET(reg,val) (reg) = ((reg & ~DMA_CLC_DISR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * ID Register + ******************************************************************************/ + +/* Number of Channels (25:20) */ +#define DMA_ID_CHNR (0x3f << 20) +#define DMA_ID_CHNR_GET(val) ((((val) & DMA_ID_CHNR) >> 20) & 0x3f) +/* Number of Ports (19:16) */ +#define DMA_ID_PRTNR (0xf << 16) +#define DMA_ID_PRTNR_GET(val) ((((val) & DMA_ID_PRTNR) >> 16) & 0xf) +/* Module ID (15:8) */ +#define DMA_ID_ID (0xff << 8) +#define DMA_ID_ID_GET(val) ((((val) & DMA_ID_ID) >> 8) & 0xff) +/* Revision (4:0) */ +#define DMA_ID_REV (0x1f) +#define DMA_ID_REV_GET(val) ((((val) & DMA_ID_REV) >> 0) & 0x1f) + +/******************************************************************************* + * Control Register + ******************************************************************************/ + +/* Global Software Reset (0) */ +#define DMA_CTRL_RST (0x1) +#define DMA_CTRL_RST_GET(val) ((((val) & DMA_CTRL_RST) >> 0) & 0x1) + +/******************************************************************************* + * Channel Polling Register + ******************************************************************************/ + +/* Enable (31) */ +#define DMA_CPOLL_EN (0x1 << 31) +#define DMA_CPOLL_EN_VAL(val) (((val) & 0x1) << 31) +#define DMA_CPOLL_EN_GET(val) ((((val) & DMA_CPOLL_EN) >> 31) & 0x1) +#define DMA_CPOLL_EN_SET(reg,val) (reg) = ((reg & ~DMA_CPOLL_EN) | (((val) & 0x1) << 31)) +/* Counter (15:4) */ +#define DMA_CPOLL_CNT (0xfff << 4) +#define DMA_CPOLL_CNT_VAL(val) (((val) & 0xfff) << 4) +#define DMA_CPOLL_CNT_GET(val) ((((val) & DMA_CPOLL_CNT) >> 4) & 0xfff) +#define DMA_CPOLL_CNT_SET(reg,val) (reg) = ((reg & ~DMA_CPOLL_CNT) | (((val) & 0xfff) << 4)) + +/******************************************************************************* + * Global Buffer Length Register + ******************************************************************************/ + +/* Global Buffer Length (15:0) */ +#define DMA_CGBL_GBL (0xffff) +#define DMA_CGBL_GBL_VAL(val) (((val) & 0xffff) << 0) +#define DMA_CGBL_GBL_GET(val) ((((val) & DMA_CGBL_GBL) >> 0) & 0xffff) +#define DMA_CGBL_GBL_SET(reg,val) (reg) = ((reg & ~DMA_CGBL_GBL) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * Channel Select Register + ******************************************************************************/ + +/* Channel Selection (4:0) */ +#define DMA_CS_CS (0x1f) +#define DMA_CS_CS_VAL(val) (((val) & 0x1f) << 0) +#define DMA_CS_CS_GET(val) ((((val) & DMA_CS_CS) >> 0) & 0x1f) +#define DMA_CS_CS_SET(reg,val) (reg) = ((reg & ~DMA_CS_CS) | (((val) & 0x1f) << 0)) + +/******************************************************************************* + * Channel Control Register + ******************************************************************************/ + +/* Peripheral to Peripheral Copy (24) */ +#define DMA_CCTRL_P2PCPY (0x1 << 24) +#define DMA_CCTRL_P2PCPY_VAL(val) (((val) & 0x1) << 24) +#define DMA_CCTRL_P2PCPY_GET(val) ((((val) & DMA_CCTRL_P2PCPY) >> 24) & 0x1) +#define DMA_CCTRL_P2PCPY_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_P2PCPY) | (((val) & 0x1) << 24)) +/* Channel Weight for Transmit Direction (17:16) */ +#define DMA_CCTRL_TXWGT (0x3 << 16) +#define DMA_CCTRL_TXWGT_VAL(val) (((val) & 0x3) << 16) +#define DMA_CCTRL_TXWGT_GET(val) ((((val) & DMA_CCTRL_TXWGT) >> 16) & 0x3) +#define DMA_CCTRL_TXWGT_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_TXWGT) | (((val) & 0x3) << 16)) +/* Port Assignment (13:11) */ +#define DMA_CCTRL_PRTNR (0x7 << 11) +#define DMA_CCTRL_PRTNR_GET(val) ((((val) & DMA_CCTRL_PRTNR) >> 11) & 0x7) +/* Class (10:9) */ +#define DMA_CCTRL_CLASS (0x3 << 9) +#define DMA_CCTRL_CLASS_VAL(val) (((val) & 0x3) << 9) +#define DMA_CCTRL_CLASS_GET(val) ((((val) & DMA_CCTRL_CLASS) >> 9) & 0x3) +#define DMA_CCTRL_CLASS_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_CLASS) | (((val) & 0x3) << 9)) +/* Direction (8) */ +#define DMA_CCTRL_DIR (0x1 << 8) +#define DMA_CCTRL_DIR_GET(val) ((((val) & DMA_CCTRL_DIR) >> 8) & 0x1) +/* Reset (1) */ +#define DMA_CCTRL_RST (0x1 << 1) +#define DMA_CCTRL_RST_VAL(val) (((val) & 0x1) << 1) +#define DMA_CCTRL_RST_GET(val) ((((val) & DMA_CCTRL_RST) >> 1) & 0x1) +#define DMA_CCTRL_RST_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_RST) | (((val) & 0x1) << 1)) +/* Channel On or Off (0) */ +#define DMA_CCTRL_ON_OFF (0x1) +#define DMA_CCTRL_ON_OFF_VAL(val) (((val) & 0x1) << 0) +#define DMA_CCTRL_ON_OFF_GET(val) ((((val) & DMA_CCTRL_ON_OFF) >> 0) & 0x1) +#define DMA_CCTRL_ON_OFF_SET(reg,val) (reg) = ((reg & ~DMA_CCTRL_ON_OFF) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Channel Descriptor Base Address Register + ******************************************************************************/ + +/* Channel Descriptor Base Address (29:3) */ +#define DMA_CDBA_CDBA (0x7ffffff << 3) +#define DMA_CDBA_CDBA_VAL(val) (((val) & 0x7ffffff) << 3) +#define DMA_CDBA_CDBA_GET(val) ((((val) & DMA_CDBA_CDBA) >> 3) & 0x7ffffff) +#define DMA_CDBA_CDBA_SET(reg,val) (reg) = ((reg & ~DMA_CDBA_CDBA) | (((val) & 0x7ffffff) << 3)) + +/******************************************************************************* + * Channel Descriptor Length Register + ******************************************************************************/ + +/* Channel Descriptor Length (7:0) */ +#define DMA_CDLEN_CDLEN (0xff) +#define DMA_CDLEN_CDLEN_VAL(val) (((val) & 0xff) << 0) +#define DMA_CDLEN_CDLEN_GET(val) ((((val) & DMA_CDLEN_CDLEN) >> 0) & 0xff) +#define DMA_CDLEN_CDLEN_SET(reg,val) (reg) = ((reg & ~DMA_CDLEN_CDLEN) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * Channel Interrupt Status Register + ******************************************************************************/ + +/* SAI Read Error Interrupt (5) */ +#define DMA_CIS_RDERR (0x1 << 5) +#define DMA_CIS_RDERR_GET(val) ((((val) & DMA_CIS_RDERR) >> 5) & 0x1) +/* Channel Off Interrupt (4) */ +#define DMA_CIS_CHOFF (0x1 << 4) +#define DMA_CIS_CHOFF_GET(val) ((((val) & DMA_CIS_CHOFF) >> 4) & 0x1) +/* Descriptor Complete Interrupt (3) */ +#define DMA_CIS_DESCPT (0x1 << 3) +#define DMA_CIS_DESCPT_GET(val) ((((val) & DMA_CIS_DESCPT) >> 3) & 0x1) +/* Descriptor Under-Run Interrupt (2) */ +#define DMA_CIS_DUR (0x1 << 2) +#define DMA_CIS_DUR_GET(val) ((((val) & DMA_CIS_DUR) >> 2) & 0x1) +/* End of Packet Interrupt (1) */ +#define DMA_CIS_EOP (0x1 << 1) +#define DMA_CIS_EOP_GET(val) ((((val) & DMA_CIS_EOP) >> 1) & 0x1) + +/******************************************************************************* + * Channel Interrupt Enable Register + ******************************************************************************/ + +/* SAI Read Error Interrupt (5) */ +#define DMA_CIE_RDERR (0x1 << 5) +#define DMA_CIE_RDERR_GET(val) ((((val) & DMA_CIE_RDERR) >> 5) & 0x1) +/* Channel Off Interrupt (4) */ +#define DMA_CIE_CHOFF (0x1 << 4) +#define DMA_CIE_CHOFF_GET(val) ((((val) & DMA_CIE_CHOFF) >> 4) & 0x1) +/* Descriptor Complete Interrupt Enable (3) */ +#define DMA_CIE_DESCPT (0x1 << 3) +#define DMA_CIE_DESCPT_GET(val) ((((val) & DMA_CIE_DESCPT) >> 3) & 0x1) +/* Descriptor Under Run Interrupt Enable (2) */ +#define DMA_CIE_DUR (0x1 << 2) +#define DMA_CIE_DUR_GET(val) ((((val) & DMA_CIE_DUR) >> 2) & 0x1) +/* End of Packet Interrupt Enable (1) */ +#define DMA_CIE_EOP (0x1 << 1) +#define DMA_CIE_EOP_GET(val) ((((val) & DMA_CIE_EOP) >> 1) & 0x1) + +/******************************************************************************* + * Port Select Register + ******************************************************************************/ + +/* Port Selection (2:0) */ +#define DMA_PS_PS (0x7) +#define DMA_PS_PS_VAL(val) (((val) & 0x7) << 0) +#define DMA_PS_PS_GET(val) ((((val) & DMA_PS_PS) >> 0) & 0x7) +#define DMA_PS_PS_SET(reg,val) (reg) = ((reg & ~DMA_PS_PS) | (((val) & 0x7) << 0)) + +/******************************************************************************* + * Port Control Register + ******************************************************************************/ + +/* General Purpose Control (16) */ +#define DMA_PCTRL_GPC (0x1 << 16) +#define DMA_PCTRL_GPC_VAL(val) (((val) & 0x1) << 16) +#define DMA_PCTRL_GPC_GET(val) ((((val) & DMA_PCTRL_GPC) >> 16) & 0x1) +#define DMA_PCTRL_GPC_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_GPC) | (((val) & 0x1) << 16)) +/* Port Weight for Transmit Direction (14:12) */ +#define DMA_PCTRL_TXWGT (0x7 << 12) +#define DMA_PCTRL_TXWGT_VAL(val) (((val) & 0x7) << 12) +#define DMA_PCTRL_TXWGT_GET(val) ((((val) & DMA_PCTRL_TXWGT) >> 12) & 0x7) +#define DMA_PCTRL_TXWGT_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXWGT) | (((val) & 0x7) << 12)) +/* Endianness for Transmit Direction (11:10) */ +#define DMA_PCTRL_TXENDI (0x3 << 10) +#define DMA_PCTRL_TXENDI_VAL(val) (((val) & 0x3) << 10) +#define DMA_PCTRL_TXENDI_GET(val) ((((val) & DMA_PCTRL_TXENDI) >> 10) & 0x3) +#define DMA_PCTRL_TXENDI_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXENDI) | (((val) & 0x3) << 10)) +/* Endianness for Receive Direction (9:8) */ +#define DMA_PCTRL_RXENDI (0x3 << 8) +#define DMA_PCTRL_RXENDI_VAL(val) (((val) & 0x3) << 8) +#define DMA_PCTRL_RXENDI_GET(val) ((((val) & DMA_PCTRL_RXENDI) >> 8) & 0x3) +#define DMA_PCTRL_RXENDI_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_RXENDI) | (((val) & 0x3) << 8)) +/* Packet Drop Enable (6) */ +#define DMA_PCTRL_PDEN (0x1 << 6) +#define DMA_PCTRL_PDEN_VAL(val) (((val) & 0x1) << 6) +#define DMA_PCTRL_PDEN_GET(val) ((((val) & DMA_PCTRL_PDEN) >> 6) & 0x1) +#define DMA_PCTRL_PDEN_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_PDEN) | (((val) & 0x1) << 6)) +/* Burst Length for Transmit Direction (5:4) */ +#define DMA_PCTRL_TXBL (0x3 << 4) +#define DMA_PCTRL_TXBL_VAL(val) (((val) & 0x3) << 4) +#define DMA_PCTRL_TXBL_GET(val) ((((val) & DMA_PCTRL_TXBL) >> 4) & 0x3) +#define DMA_PCTRL_TXBL_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_TXBL) | (((val) & 0x3) << 4)) +/* Burst Length for Receive Direction (3:2) */ +#define DMA_PCTRL_RXBL (0x3 << 2) +#define DMA_PCTRL_RXBL_VAL(val) (((val) & 0x3) << 2) +#define DMA_PCTRL_RXBL_GET(val) ((((val) & DMA_PCTRL_RXBL) >> 2) & 0x3) +#define DMA_PCTRL_RXBL_SET(reg,val) (reg) = ((reg & ~DMA_PCTRL_RXBL) | (((val) & 0x3) << 2)) + +/******************************************************************************* + * DMA_IRNEN Register + ******************************************************************************/ + +/* Channel x Interrupt Request Enable (23) */ +#define DMA_IRNEN_CH23 (0x1 << 23) +#define DMA_IRNEN_CH23_VAL(val) (((val) & 0x1) << 23) +#define DMA_IRNEN_CH23_GET(val) ((((val) & DMA_IRNEN_CH23) >> 23) & 0x1) +#define DMA_IRNEN_CH23_SET(reg,val) (reg) = ((reg & ~DMA_IRNEN_CH23) | (((val) & 0x1) << 23)) + +/******************************************************************************* + * DMA_IRNCR Register + ******************************************************************************/ + +/* Channel x Interrupt (23) */ +#define DMA_IRNCR_CH23 (0x1 << 23) +#define DMA_IRNCR_CH23_GET(val) ((((val) & DMA_IRNCR_CH23) >> 23) & 0x1) + +/******************************************************************************* + * DMA_IRNICR Register + ******************************************************************************/ + +/* Channel x Interrupt Request (23) */ +#define DMA_IRNICR_CH23 (0x1 << 23) +#define DMA_IRNICR_CH23_GET(val) ((((val) & DMA_IRNICR_CH23) >> 23) & 0x1) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h new file mode 100644 index 0000000000..4e00d01bae --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/ebu_reg.h @@ -0,0 +1,615 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __EBU_REG_H +#define __EBU_REG_H + +#define ebu_r32(reg) ltq_r32(&ebu->reg) +#define ebu_w32(val, reg) ltq_w32(val, &ebu->reg) +#define ebu_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &ebu->reg) + +/** EBU register structure */ +struct svip_reg_ebu { + volatile unsigned long clc; /* 0x0000 */ + volatile unsigned long reserved0; /* 0x04 */ + volatile unsigned long id; /* 0x0008 */ + volatile unsigned long reserved1; /* 0x0c */ + volatile unsigned long con; /* 0x0010 */ + volatile unsigned long reserved2[3]; /* 0x14 */ + volatile unsigned long addr_sel_0; /* 0x0020 */ + volatile unsigned long addr_sel_1; /* 0x0024 */ + volatile unsigned long addr_sel_2; /* 0x0028 */ + volatile unsigned long addr_sel_3; /* 0x002c */ + volatile unsigned long reserved3[12]; /* 0x30 */ + volatile unsigned long con_0; /* 0x0060 */ + volatile unsigned long con_1; /* 0x0064 */ + volatile unsigned long con_2; /* 0x0068 */ + volatile unsigned long con_3; /* 0x006c */ + volatile unsigned long reserved4[4]; /* 0x70 */ + volatile unsigned long emu_addr; /* 0x0080 */ + volatile unsigned long emu_bc; /* 0x0084 */ + volatile unsigned long emu_con; /* 0x0088 */ + volatile unsigned long reserved5; /* 0x8c */ + volatile unsigned long pcc_con; /* 0x0090 */ + volatile unsigned long pcc_stat; /* 0x0094 */ + volatile unsigned long reserved6[2]; /* 0x98 */ + volatile unsigned long pcc_istat; /* 0x00A0 */ + volatile unsigned long pcc_ien; /* 0x00A4 */ + volatile unsigned long pcc_int_out; /* 0x00A8 */ + volatile unsigned long pcc_irs; /* 0x00AC */ + volatile unsigned long nand_con; /* 0x00B0 */ + volatile unsigned long nand_wait; /* 0x00B4 */ + volatile unsigned long nand_ecc0; /* 0x00B8 */ + volatile unsigned long nand_ecc_ac; /* 0x00BC */ +}; + +/******************************************************************************* + * EBU + ******************************************************************************/ +#define LTQ_EBU_CLC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0000)) +#define LTQ_EBU_ID ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0008)) +#define LTQ_EBU_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0010)) +#define LTQ_EBU_ADDR_SEL_0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0020)) +#define LTQ_EBU_ADDR_SEL_1 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0024)) +#define LTQ_EBU_ADDR_SEL_2 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0028)) +#define LTQ_EBU_ADDR_SEL_3 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x002c)) +#define LTQ_EBU_CON_0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0060)) +#define LTQ_EBU_CON_1 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0064)) +#define LTQ_EBU_CON_2 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0068)) +#define LTQ_EBU_CON_3 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x006c)) +#define LTQ_EBU_EMU_BC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0084)) +#define LTQ_EBU_PCC_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0090)) +#define LTQ_EBU_PCC_STAT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0094)) +#define LTQ_EBU_PCC_ISTAT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A0)) +#define LTQ_EBU_PCC_IEN ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A4)) +#define LTQ_EBU_PCC_INT_OUT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00A8)) +#define LTQ_EBU_PCC_IRS ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00AC)) +#define LTQ_EBU_NAND_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B0)) +#define LTQ_EBU_NAND_WAIT ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B4)) +#define LTQ_EBU_NAND_ECC0 ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00B8)) +#define LTQ_EBU_NAND_ECC_AC ((volatile unsigned int*)(LTQ_EBU_BASE + 0x00BC)) +#define LTQ_EBU_EMU_ADDR ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0080)) +#define LTQ_EBU_EMU_CON ((volatile unsigned int*)(LTQ_EBU_BASE + 0x0088)) + +/******************************************************************************* + * EBU Clock Control Register + ******************************************************************************/ + +/* EBU Disable Status Bit (1) */ +#define LTQ_EBU_CLC_DISS (0x1 << 1) +#define LTQ_EBU_CLC_DISS_GET(val) ((((val) & LTQ_EBU_CLC_DISS) >> 1) & 0x1) +/* Used for Enable/disable Control of the EBU (0) */ +#define LTQ_EBU_CLC_DISR (0x1) +#define LTQ_EBU_CLC_DISR_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_CLC_DISR_GET(val) ((((val) & LTQ_EBU_CLC_DISR) >> 0) & 0x1) +#define LTQ_EBU_CLC_DISR_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CLC_DISR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * EBU Identification Register (Internal) + ******************************************************************************/ + +/* Module Number (31:8) */ +#define LTQ_EBU_ID_MODNUM (0xffffff << 8) +#define LTQ_EBU_ID_MODNUM_GET(val) ((((val) & LTQ_EBU_ID_MODNUM) >> 8) & 0xffffff) +/* Revision Number (7:0) */ +#define LTQ_EBU_ID_REVNUM (0xff) +#define LTQ_EBU_ID_REVNUM_GET(val) ((((val) & LTQ_EBU_ID_REVNUM) >> 0) & 0xff) + +/******************************************************************************* + * External Bus Unit Control Register + ******************************************************************************/ + +/* Driver Turn-Around Control, Chip Select Triggered (22:20) */ +#define LTQ_EBU_CON_DTACS (0x7 << 20) +#define LTQ_EBU_CON_DTACS_VAL(val) (((val) & 0x7) << 20) +#define LTQ_EBU_CON_DTACS_GET(val) ((((val) & LTQ_EBU_CON_DTACS) >> 20) & 0x7) +#define LTQ_EBU_CON_DTACS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_DTACS) | (((val) & 0x7) << 20)) +/* Driver Turn-Around Control, Read-write Triggered (18:16) */ +#define LTQ_EBU_CON_DTARW (0x7 << 16) +#define LTQ_EBU_CON_DTARW_VAL(val) (((val) & 0x7) << 16) +#define LTQ_EBU_CON_DTARW_GET(val) ((((val) & LTQ_EBU_CON_DTARW) >> 16) & 0x7) +#define LTQ_EBU_CON_DTARW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_DTARW) | (((val) & 0x7) << 16)) +/* Time-Out Control (15:8) */ +#define LTQ_EBU_CON_TOUTC (0xff << 8) +#define LTQ_EBU_CON_TOUTC_VAL(val) (((val) & 0xff) << 8) +#define LTQ_EBU_CON_TOUTC_GET(val) ((((val) & LTQ_EBU_CON_TOUTC) >> 8) & 0xff) +#define LTQ_EBU_CON_TOUTC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_TOUTC) | (((val) & 0xff) << 8)) +/* Arbitration Mode (7:6) */ +#define LTQ_EBU_CON_ARBMODE (0x3 << 6) +#define LTQ_EBU_CON_ARBMODE_VAL(val) (((val) & 0x3) << 6) +#define LTQ_EBU_CON_ARBMODE_GET(val) ((((val) & LTQ_EBU_CON_ARBMODE) >> 6) & 0x3) +#define LTQ_EBU_CON_ARBMODE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_ARBMODE) | (((val) & 0x3) << 6)) +/* Arbitration Synchronization (5) */ +#define LTQ_EBU_CON_ARBSYNC (0x1 << 5) +#define LTQ_EBU_CON_ARBSYNC_VAL(val) (((val) & 0x1) << 5) +#define LTQ_EBU_CON_ARBSYNC_GET(val) ((((val) & LTQ_EBU_CON_ARBSYNC) >> 5) & 0x1) +#define LTQ_EBU_CON_ARBSYNC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_ARBSYNC) | (((val) & 0x1) << 5)) + +/******************************************************************************* + * Address Select Registers + ******************************************************************************/ + +/* Memory Region Base Address (31:12) */ +#define LTQ_EBU_ADDR_SEL_0_BASE (0xfffff << 12) +#define LTQ_EBU_ADDR_SEL_0_BASE_VAL(val) (((val) & 0xfffff) << 12) +#define LTQ_EBU_ADDR_SEL_0_BASE_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_BASE) >> 12) & 0xfffff) +#define LTQ_EBU_ADDR_SEL_0_BASE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_BASE) | (((val) & 0xfffff) << 12)) +/* Memory Region Address Mask (7:4) */ +#define LTQ_EBU_ADDR_SEL_0_MASK (0xf << 4) +#define LTQ_EBU_ADDR_SEL_0_MASK_VAL(val) (((val) & 0xf) << 4) +#define LTQ_EBU_ADDR_SEL_0_MASK_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_MASK) >> 4) & 0xf) +#define LTQ_EBU_ADDR_SEL_0_MASK_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_MASK) | (((val) & 0xf) << 4)) +/* Memory Region Mirror Enable Control (1) */ +#define LTQ_EBU_ADDR_SEL_0_MRME (0x1 << 1) +#define LTQ_EBU_ADDR_SEL_0_MRME_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_ADDR_SEL_0_MRME_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_MRME) >> 1) & 0x1) +#define LTQ_EBU_ADDR_SEL_0_MRME_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_MRME) | (((val) & 0x1) << 1)) +/* Memory Region Enable Control (0) */ +#define LTQ_EBU_ADDR_SEL_0_REGEN (0x1) +#define LTQ_EBU_ADDR_SEL_0_REGEN_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_ADDR_SEL_0_REGEN_GET(val) ((((val) & LTQ_EBU_ADDR_SEL_0_REGEN) >> 0) & 0x1) +#define LTQ_EBU_ADDR_SEL_0_REGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_ADDR_SEL_0_REGEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Bus Configuration Registers + ******************************************************************************/ + +/* Memory Region Write Protection (31) */ +#define LTQ_EBU_CON_0_WRDIS (0x1 << 31) +#define LTQ_EBU_CON_0_WRDIS_VAL(val) (((val) & 0x1) << 31) +#define LTQ_EBU_CON_0_WRDIS_GET(val) ((((val) & LTQ_EBU_CON_0_WRDIS) >> 31) & 0x1) +#define LTQ_EBU_CON_0_WRDIS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WRDIS) | (((val) & 0x1) << 31)) +/* Address Swapping (30) */ +#define LTQ_EBU_CON_0_ADSWP (0x1 << 30) +#define LTQ_EBU_CON_0_ADSWP_VAL(val) (((val) & 0x1) << 30) +#define LTQ_EBU_CON_0_ADSWP_GET(val) ((((val) & LTQ_EBU_CON_0_ADSWP) >> 30) & 0x1) +#define LTQ_EBU_CON_0_ADSWP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_ADSWP) | (((val) & 0x1) << 30)) +/* Address Generation Control (26:24) */ +#define LTQ_EBU_CON_0_AGEN (0x7 << 24) +#define LTQ_EBU_CON_0_AGEN_VAL(val) (((val) & 0x7) << 24) +#define LTQ_EBU_CON_0_AGEN_GET(val) ((((val) & LTQ_EBU_CON_0_AGEN) >> 24) & 0x7) +#define LTQ_EBU_CON_0_AGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_AGEN) | (((val) & 0x7) << 24)) +/* Extended Address Setup Control (22) */ +#define LTQ_EBU_CON_0_SETUP (0x1 << 22) +#define LTQ_EBU_CON_0_SETUP_VAL(val) (((val) & 0x1) << 22) +#define LTQ_EBU_CON_0_SETUP_GET(val) ((((val) & LTQ_EBU_CON_0_SETUP) >> 22) & 0x1) +#define LTQ_EBU_CON_0_SETUP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_SETUP) | (((val) & 0x1) << 22)) +/* Variable Wait-State Insertion Control (21:20) */ +#define LTQ_EBU_CON_0_WAIT (0x3 << 20) +#define LTQ_EBU_CON_0_WAIT_VAL(val) (((val) & 0x3) << 20) +#define LTQ_EBU_CON_0_WAIT_GET(val) ((((val) & LTQ_EBU_CON_0_WAIT) >> 20) & 0x3) +#define LTQ_EBU_CON_0_WAIT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAIT) | (((val) & 0x3) << 20)) +/* Active WAIT Level Control (19) */ +#define LTQ_EBU_CON_0_WINV (0x1 << 19) +#define LTQ_EBU_CON_0_WINV_VAL(val) (((val) & 0x1) << 19) +#define LTQ_EBU_CON_0_WINV_GET(val) ((((val) & LTQ_EBU_CON_0_WINV) >> 19) & 0x1) +#define LTQ_EBU_CON_0_WINV_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WINV) | (((val) & 0x1) << 19)) +/* External Device Data Width Control (17:16) */ +#define LTQ_EBU_CON_0_PW (0x3 << 16) +#define LTQ_EBU_CON_0_PW_VAL(val) (((val) & 0x3) << 16) +#define LTQ_EBU_CON_0_PW_GET(val) ((((val) & LTQ_EBU_CON_0_PW) >> 16) & 0x3) +#define LTQ_EBU_CON_0_PW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_PW) | (((val) & 0x3) << 16)) +/* Address Latch Enable ALE Duration Control (15:14) */ +#define LTQ_EBU_CON_0_ALEC (0x3 << 14) +#define LTQ_EBU_CON_0_ALEC_VAL(val) (((val) & 0x3) << 14) +#define LTQ_EBU_CON_0_ALEC_GET(val) ((((val) & LTQ_EBU_CON_0_ALEC) >> 14) & 0x3) +#define LTQ_EBU_CON_0_ALEC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_ALEC) | (((val) & 0x3) << 14)) +/* Byte Control Signal Timing Mode Control (13:12) */ +#define LTQ_EBU_CON_0_BCGEN (0x3 << 12) +#define LTQ_EBU_CON_0_BCGEN_VAL(val) (((val) & 0x3) << 12) +#define LTQ_EBU_CON_0_BCGEN_GET(val) ((((val) & LTQ_EBU_CON_0_BCGEN) >> 12) & 0x3) +#define LTQ_EBU_CON_0_BCGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_BCGEN) | (((val) & 0x3) << 12)) +/* Write Access Wait-State Control (10:8) */ +#define LTQ_EBU_CON_0_WAITWRC (0x7 << 8) +#define LTQ_EBU_CON_0_WAITWRC_VAL(val) (((val) & 0x7) << 8) +#define LTQ_EBU_CON_0_WAITWRC_GET(val) ((((val) & LTQ_EBU_CON_0_WAITWRC) >> 8) & 0x7) +#define LTQ_EBU_CON_0_WAITWRC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAITWRC) | (((val) & 0x7) << 8)) +/* Read Access Wait-State Control (7:6) */ +#define LTQ_EBU_CON_0_WAITRDC (0x3 << 6) +#define LTQ_EBU_CON_0_WAITRDC_VAL(val) (((val) & 0x3) << 6) +#define LTQ_EBU_CON_0_WAITRDC_GET(val) ((((val) & LTQ_EBU_CON_0_WAITRDC) >> 6) & 0x3) +#define LTQ_EBU_CON_0_WAITRDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_WAITRDC) | (((val) & 0x3) << 6)) +/* Hold/Pause Cycle Control (5:4) */ +#define LTQ_EBU_CON_0_HOLDC (0x3 << 4) +#define LTQ_EBU_CON_0_HOLDC_VAL(val) (((val) & 0x3) << 4) +#define LTQ_EBU_CON_0_HOLDC_GET(val) ((((val) & LTQ_EBU_CON_0_HOLDC) >> 4) & 0x3) +#define LTQ_EBU_CON_0_HOLDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_HOLDC) | (((val) & 0x3) << 4)) +/* Recovery Cycle Control (3:2) */ +#define LTQ_EBU_CON_0_RECOVC (0x3 << 2) +#define LTQ_EBU_CON_0_RECOVC_VAL(val) (((val) & 0x3) << 2) +#define LTQ_EBU_CON_0_RECOVC_GET(val) ((((val) & LTQ_EBU_CON_0_RECOVC) >> 2) & 0x3) +#define LTQ_EBU_CON_0_RECOVC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_RECOVC) | (((val) & 0x3) << 2)) +/* Wait Cycle Multiplier Control (1:0) */ +#define LTQ_EBU_CON_0_CMULT (0x3) +#define LTQ_EBU_CON_0_CMULT_VAL(val) (((val) & 0x3) << 0) +#define LTQ_EBU_CON_0_CMULT_GET(val) ((((val) & LTQ_EBU_CON_0_CMULT) >> 0) & 0x3) +#define LTQ_EBU_CON_0_CMULT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_CON_0_CMULT) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * External Bus Unit Emulator Bus Configuration Register + ******************************************************************************/ + +/* Write Protection (31) */ +#define LTQ_EBU_EMU_BC_WRITE (0x1 << 31) +#define LTQ_EBU_EMU_BC_WRITE_VAL(val) (((val) & 0x1) << 31) +#define LTQ_EBU_EMU_BC_WRITE_GET(val) ((((val) & LTQ_EBU_EMU_BC_WRITE) >> 31) & 0x1) +#define LTQ_EBU_EMU_BC_WRITE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WRITE) | (((val) & 0x1) << 31)) +/* Address Generation Control (26:24) */ +#define LTQ_EBU_EMU_BC_AGEN (0x7 << 24) +#define LTQ_EBU_EMU_BC_AGEN_VAL(val) (((val) & 0x7) << 24) +#define LTQ_EBU_EMU_BC_AGEN_GET(val) ((((val) & LTQ_EBU_EMU_BC_AGEN) >> 24) & 0x7) +#define LTQ_EBU_EMU_BC_AGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_AGEN) | (((val) & 0x7) << 24)) +/* Extended Address Setup Control (22) */ +#define LTQ_EBU_EMU_BC_SETUP (0x1 << 22) +#define LTQ_EBU_EMU_BC_SETUP_VAL(val) (((val) & 0x1) << 22) +#define LTQ_EBU_EMU_BC_SETUP_GET(val) ((((val) & LTQ_EBU_EMU_BC_SETUP) >> 22) & 0x1) +#define LTQ_EBU_EMU_BC_SETUP_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_SETUP) | (((val) & 0x1) << 22)) +/* Variable Waitstate Insertion Control (21:20) */ +#define LTQ_EBU_EMU_BC_WAIT (0x3 << 20) +#define LTQ_EBU_EMU_BC_WAIT_VAL(val) (((val) & 0x3) << 20) +#define LTQ_EBU_EMU_BC_WAIT_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAIT) >> 20) & 0x3) +#define LTQ_EBU_EMU_BC_WAIT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAIT) | (((val) & 0x3) << 20)) +/* Active WAIT Level Control (19) */ +#define LTQ_EBU_EMU_BC_WINV (0x1 << 19) +#define LTQ_EBU_EMU_BC_WINV_VAL(val) (((val) & 0x1) << 19) +#define LTQ_EBU_EMU_BC_WINV_GET(val) ((((val) & LTQ_EBU_EMU_BC_WINV) >> 19) & 0x1) +#define LTQ_EBU_EMU_BC_WINV_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WINV) | (((val) & 0x1) << 19)) +/* External Device Data Width Control (17:16) */ +#define LTQ_EBU_EMU_BC_PORTW (0x3 << 16) +#define LTQ_EBU_EMU_BC_PORTW_VAL(val) (((val) & 0x3) << 16) +#define LTQ_EBU_EMU_BC_PORTW_GET(val) ((((val) & LTQ_EBU_EMU_BC_PORTW) >> 16) & 0x3) +#define LTQ_EBU_EMU_BC_PORTW_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_PORTW) | (((val) & 0x3) << 16)) +/* Address Latch Enable Function (15:14) */ +#define LTQ_EBU_EMU_BC_ALEC (0x3 << 14) +#define LTQ_EBU_EMU_BC_ALEC_VAL(val) (((val) & 0x3) << 14) +#define LTQ_EBU_EMU_BC_ALEC_GET(val) ((((val) & LTQ_EBU_EMU_BC_ALEC) >> 14) & 0x3) +#define LTQ_EBU_EMU_BC_ALEC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_ALEC) | (((val) & 0x3) << 14)) +/* Byte Control Signal Timing Mode (13:12) */ +#define LTQ_EBU_EMU_BC_BCGEN (0x3 << 12) +#define LTQ_EBU_EMU_BC_BCGEN_VAL(val) (((val) & 0x3) << 12) +#define LTQ_EBU_EMU_BC_BCGEN_GET(val) ((((val) & LTQ_EBU_EMU_BC_BCGEN) >> 12) & 0x3) +#define LTQ_EBU_EMU_BC_BCGEN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_BCGEN) | (((val) & 0x3) << 12)) +/* Write Access Waitstate Control (10:8) */ +#define LTQ_EBU_EMU_BC_WAITWRC (0x7 << 8) +#define LTQ_EBU_EMU_BC_WAITWRC_VAL(val) (((val) & 0x7) << 8) +#define LTQ_EBU_EMU_BC_WAITWRC_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAITWRC) >> 8) & 0x7) +#define LTQ_EBU_EMU_BC_WAITWRC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAITWRC) | (((val) & 0x7) << 8)) +/* Read Access Waitstate Control (7:6) */ +#define LTQ_EBU_EMU_BC_WAITRDC (0x3 << 6) +#define LTQ_EBU_EMU_BC_WAITRDC_VAL(val) (((val) & 0x3) << 6) +#define LTQ_EBU_EMU_BC_WAITRDC_GET(val) ((((val) & LTQ_EBU_EMU_BC_WAITRDC) >> 6) & 0x3) +#define LTQ_EBU_EMU_BC_WAITRDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_WAITRDC) | (((val) & 0x3) << 6)) +/* Hold/Pause Cycle Control (5:4) */ +#define LTQ_EBU_EMU_BC_HOLDC (0x3 << 4) +#define LTQ_EBU_EMU_BC_HOLDC_VAL(val) (((val) & 0x3) << 4) +#define LTQ_EBU_EMU_BC_HOLDC_GET(val) ((((val) & LTQ_EBU_EMU_BC_HOLDC) >> 4) & 0x3) +#define LTQ_EBU_EMU_BC_HOLDC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_HOLDC) | (((val) & 0x3) << 4)) +/* Recovery Cycles Control (3:2) */ +#define LTQ_EBU_EMU_BC_RECOVC (0x3 << 2) +#define LTQ_EBU_EMU_BC_RECOVC_VAL(val) (((val) & 0x3) << 2) +#define LTQ_EBU_EMU_BC_RECOVC_GET(val) ((((val) & LTQ_EBU_EMU_BC_RECOVC) >> 2) & 0x3) +#define LTQ_EBU_EMU_BC_RECOVC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_RECOVC) | (((val) & 0x3) << 2)) +/* Cycle Multiplier Control (1:0) */ +#define LTQ_EBU_EMU_BC_CMULT (0x3) +#define LTQ_EBU_EMU_BC_CMULT_VAL(val) (((val) & 0x3) << 0) +#define LTQ_EBU_EMU_BC_CMULT_GET(val) ((((val) & LTQ_EBU_EMU_BC_CMULT) >> 0) & 0x3) +#define LTQ_EBU_EMU_BC_CMULT_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_BC_CMULT) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * PC-Card Control Register + ******************************************************************************/ + +/* External Interrupt Input IREQ (3:1) */ +#define LTQ_EBU_PCC_CON_IREQ (0x7 << 1) +#define LTQ_EBU_PCC_CON_IREQ_VAL(val) (((val) & 0x7) << 1) +#define LTQ_EBU_PCC_CON_IREQ_GET(val) ((((val) & LTQ_EBU_PCC_CON_IREQ) >> 1) & 0x7) +#define LTQ_EBU_PCC_CON_IREQ_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_CON_IREQ) | (((val) & 0x7) << 1)) +/* PC Card ON (0) */ +#define LTQ_EBU_PCC_CON_ON (0x1) +#define LTQ_EBU_PCC_CON_ON_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_CON_ON_GET(val) ((((val) & LTQ_EBU_PCC_CON_ON) >> 0) & 0x1) +#define LTQ_EBU_PCC_CON_ON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_CON_ON) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PCC Status Register + ******************************************************************************/ + +/* Interrupt Request (6) */ +#define LTQ_EBU_PCC_STAT_IRQ (0x1 << 6) +#define LTQ_EBU_PCC_STAT_IRQ_GET(val) ((((val) & LTQ_EBU_PCC_STAT_IRQ) >> 6) & 0x1) +/* PC-Card Overcurrent (5) */ +#define LTQ_EBU_PCC_STAT_OC (0x1 << 5) +#define LTQ_EBU_PCC_STAT_OC_GET(val) ((((val) & LTQ_EBU_PCC_STAT_OC) >> 5) & 0x1) +/* PC-Card Socket Power On (4) */ +#define LTQ_EBU_PCC_STAT_SPON (0x1 << 4) +#define LTQ_EBU_PCC_STAT_SPON_GET(val) ((((val) & LTQ_EBU_PCC_STAT_SPON) >> 4) & 0x1) +/* Card Detect Status (1:0) */ +#define LTQ_EBU_PCC_STAT_CD (0x3) +#define LTQ_EBU_PCC_STAT_CD_GET(val) ((((val) & LTQ_EBU_PCC_STAT_CD) >> 0) & 0x3) + +/******************************************************************************* + * PCC Interrupt Status Register + ******************************************************************************/ + +/* Interrupt Request Active Interrupt (4) */ +#define LTQ_EBU_PCC_ISTAT_IREQ (0x1 << 4) +#define LTQ_EBU_PCC_ISTAT_IREQ_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_PCC_ISTAT_IREQ_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_IREQ) >> 4) & 0x1) +#define LTQ_EBU_PCC_ISTAT_IREQ_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_IREQ) | (((val) & 0x1) << 4)) +/* Over Current Status Change Interrupt (3) */ +#define LTQ_EBU_PCC_ISTAT_OC (0x1 << 3) +#define LTQ_EBU_PCC_ISTAT_OC_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_PCC_ISTAT_OC_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_OC) >> 3) & 0x1) +#define LTQ_EBU_PCC_ISTAT_OC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_OC) | (((val) & 0x1) << 3)) +/* Socket Power on Status Change Interrupt (2) */ +#define LTQ_EBU_PCC_ISTAT_SPON (0x1 << 2) +#define LTQ_EBU_PCC_ISTAT_SPON_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_PCC_ISTAT_SPON_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_SPON) >> 2) & 0x1) +#define LTQ_EBU_PCC_ISTAT_SPON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_SPON) | (((val) & 0x1) << 2)) +/* Voltage Sense Status Change Interrupt (1) */ +#define LTQ_EBU_PCC_ISTAT_VS (0x1 << 1) +#define LTQ_EBU_PCC_ISTAT_VS_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_PCC_ISTAT_VS_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_VS) >> 1) & 0x1) +#define LTQ_EBU_PCC_ISTAT_VS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_VS) | (((val) & 0x1) << 1)) +/* Card Detect Status Change Interrupt (0) */ +#define LTQ_EBU_PCC_ISTAT_CD (0x1) +#define LTQ_EBU_PCC_ISTAT_CD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_ISTAT_CD_GET(val) ((((val) & LTQ_EBU_PCC_ISTAT_CD) >> 0) & 0x1) +#define LTQ_EBU_PCC_ISTAT_CD_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_ISTAT_CD) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PCC Interrupt Enable Register + ******************************************************************************/ + +/* Enable of Interrupt Request IR (4) */ +#define LTQ_EBU_PCC_IEN_IR (0x1 << 4) +#define LTQ_EBU_PCC_IEN_IR_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_PCC_IEN_IR_GET(val) ((((val) & LTQ_EBU_PCC_IEN_IR) >> 4) & 0x1) +#define LTQ_EBU_PCC_IEN_IR_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_IR) | (((val) & 0x1) << 4)) +/* Enable of Interrupt Request OC event (3) */ +#define LTQ_EBU_PCC_IEN_OC (0x1 << 3) +#define LTQ_EBU_PCC_IEN_OC_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_PCC_IEN_OC_GET(val) ((((val) & LTQ_EBU_PCC_IEN_OC) >> 3) & 0x1) +#define LTQ_EBU_PCC_IEN_OC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_OC) | (((val) & 0x1) << 3)) +/* Enable of Interrupt Request Socket Power On (2) */ +#define LTQ_EBU_PCC_IEN_PWRON (0x1 << 2) +#define LTQ_EBU_PCC_IEN_PWRON_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_PCC_IEN_PWRON_GET(val) ((((val) & LTQ_EBU_PCC_IEN_PWRON) >> 2) & 0x1) +#define LTQ_EBU_PCC_IEN_PWRON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_PWRON) | (((val) & 0x1) << 2)) +/* Enable of Interrupt Request Voltage Sense (1) */ +#define LTQ_EBU_PCC_IEN_VS (0x1 << 1) +#define LTQ_EBU_PCC_IEN_VS_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_PCC_IEN_VS_GET(val) ((((val) & LTQ_EBU_PCC_IEN_VS) >> 1) & 0x1) +#define LTQ_EBU_PCC_IEN_VS_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_VS) | (((val) & 0x1) << 1)) +/* Enable of Interrupt Request Card Detect (0) */ +#define LTQ_EBU_PCC_IEN_CD (0x1) +#define LTQ_EBU_PCC_IEN_CD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_IEN_CD_GET(val) ((((val) & LTQ_EBU_PCC_IEN_CD) >> 0) & 0x1) +#define LTQ_EBU_PCC_IEN_CD_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_PCC_IEN_CD) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PCC Interrupt Output Status Register + ******************************************************************************/ + +/* Status of Interrupt Request IR (4) */ +#define LTQ_EBU_PCC_INT_OUT_IR (0x1 << 4) +#define LTQ_EBU_PCC_INT_OUT_IR_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_IR) >> 4) & 0x1) +/* Status of Interrupt Request OC (3) */ +#define LTQ_EBU_PCC_INT_OUT_OC (0x1 << 3) +#define LTQ_EBU_PCC_INT_OUT_OC_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_OC) >> 3) & 0x1) +/* Status of Interrupt Request Socket Power On (2) */ +#define LTQ_EBU_PCC_INT_OUT_PWRON (0x1 << 2) +#define LTQ_EBU_PCC_INT_OUT_PWRON_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_PWRON) >> 2) & 0x1) +/* Status of Interrupt Request Voltage Sense (1) */ +#define LTQ_EBU_PCC_INT_OUT_VS (0x1 << 1) +#define LTQ_EBU_PCC_INT_OUT_VS_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_VS) >> 1) & 0x1) +/* Status of Interrupt Request Card Detect (0) */ +#define LTQ_EBU_PCC_INT_OUT_CD (0x1) +#define LTQ_EBU_PCC_INT_OUT_CD_GET(val) ((((val) & LTQ_EBU_PCC_INT_OUT_CD) >> 0) & 0x1) + +/******************************************************************************* + * PCC Interrupt Request Set Register + ******************************************************************************/ + +/* Set Interrupt Request IR (4) */ +#define LTQ_EBU_PCC_IRS_IR (0x1 << 4) +#define LTQ_EBU_PCC_IRS_IR_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_PCC_IRS_IR_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_IR) | (val) & 1) << 4) +/* Set Interrupt Request OC (3) */ +#define LTQ_EBU_PCC_IRS_OC (0x1 << 3) +#define LTQ_EBU_PCC_IRS_OC_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_PCC_IRS_OC_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_OC) | (val) & 1) << 3) +/* Set Interrupt Request Socket Power On (2) */ +#define LTQ_EBU_PCC_IRS_PWRON (0x1 << 2) +#define LTQ_EBU_PCC_IRS_PWRON_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_PCC_IRS_PWRON_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_PWRON) | (val) & 1) << 2) +/* Set Interrupt Request Voltage Sense (1) */ +#define LTQ_EBU_PCC_IRS_VS (0x1 << 1) +#define LTQ_EBU_PCC_IRS_VS_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_PCC_IRS_VS_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_VS) | (val) & 1) << 1) +/* Set Interrupt Request Card Detect (0) */ +#define LTQ_EBU_PCC_IRS_CD (0x1) +#define LTQ_EBU_PCC_IRS_CD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_PCC_IRS_CD_SET(reg,val) (reg) = (((reg & ~LTQ_EBU_PCC_IRS_CD) | (val) & 1) << 0) + +/******************************************************************************* + * NAND Flash Control Register + ******************************************************************************/ + +/* ECC Enabling (31) */ +#define LTQ_EBU_NAND_CON_ECC_ON (0x1 << 31) +#define LTQ_EBU_NAND_CON_ECC_ON_VAL(val) (((val) & 0x1) << 31) +#define LTQ_EBU_NAND_CON_ECC_ON_GET(val) ((((val) & LTQ_EBU_NAND_CON_ECC_ON) >> 31) & 0x1) +#define LTQ_EBU_NAND_CON_ECC_ON_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_ECC_ON) | (((val) & 0x1) << 31)) +/* Latch enable (23:18) */ +#define LTQ_EBU_NAND_CON_LAT_EN (0x3f << 18) +#define LTQ_EBU_NAND_CON_LAT_EN_VAL(val) (((val) & 0x3f) << 18) +#define LTQ_EBU_NAND_CON_LAT_EN_GET(val) ((((val) & LTQ_EBU_NAND_CON_LAT_EN) >> 18) & 0x3f) +#define LTQ_EBU_NAND_CON_LAT_EN_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_LAT_EN) | (((val) & 0x3f) << 18)) +/* Output ChipSelect# Selection (11:10) */ +#define LTQ_EBU_NAND_CON_OUT_CS_S (0x3 << 10) +#define LTQ_EBU_NAND_CON_OUT_CS_S_VAL(val) (((val) & 0x3) << 10) +#define LTQ_EBU_NAND_CON_OUT_CS_S_GET(val) ((((val) & LTQ_EBU_NAND_CON_OUT_CS_S) >> 10) & 0x3) +#define LTQ_EBU_NAND_CON_OUT_CS_S_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_OUT_CS_S) | (((val) & 0x3) << 10)) +/* Input ChipSelect# Selection (9:8) */ +#define LTQ_EBU_NAND_CON_IN_CS_S (0x3 << 8) +#define LTQ_EBU_NAND_CON_IN_CS_S_VAL(val) (((val) & 0x3) << 8) +#define LTQ_EBU_NAND_CON_IN_CS_S_GET(val) ((((val) & LTQ_EBU_NAND_CON_IN_CS_S) >> 8) & 0x3) +#define LTQ_EBU_NAND_CON_IN_CS_S_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_IN_CS_S) | (((val) & 0x3) << 8)) +/* Set PRE (7) */ +#define LTQ_EBU_NAND_CON_PRE_P (0x1 << 7) +#define LTQ_EBU_NAND_CON_PRE_P_VAL(val) (((val) & 0x1) << 7) +#define LTQ_EBU_NAND_CON_PRE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_PRE_P) >> 7) & 0x1) +#define LTQ_EBU_NAND_CON_PRE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_PRE_P) | (((val) & 0x1) << 7)) +/* Set WP Active Polarity (6) */ +#define LTQ_EBU_NAND_CON_WP_P (0x1 << 6) +#define LTQ_EBU_NAND_CON_WP_P_VAL(val) (((val) & 0x1) << 6) +#define LTQ_EBU_NAND_CON_WP_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_WP_P) >> 6) & 0x1) +#define LTQ_EBU_NAND_CON_WP_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_WP_P) | (((val) & 0x1) << 6)) +/* Set SE Active Polarity (5) */ +#define LTQ_EBU_NAND_CON_SE_P (0x1 << 5) +#define LTQ_EBU_NAND_CON_SE_P_VAL(val) (((val) & 0x1) << 5) +#define LTQ_EBU_NAND_CON_SE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_SE_P) >> 5) & 0x1) +#define LTQ_EBU_NAND_CON_SE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_SE_P) | (((val) & 0x1) << 5)) +/* Set CS Active Polarity (4) */ +#define LTQ_EBU_NAND_CON_CS_P (0x1 << 4) +#define LTQ_EBU_NAND_CON_CS_P_VAL(val) (((val) & 0x1) << 4) +#define LTQ_EBU_NAND_CON_CS_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_CS_P) >> 4) & 0x1) +#define LTQ_EBU_NAND_CON_CS_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CS_P) | (((val) & 0x1) << 4)) +/* Set CLE Active Polarity (3) */ +#define LTQ_EBU_NAND_CON_CLE_P (0x1 << 3) +#define LTQ_EBU_NAND_CON_CLE_P_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_NAND_CON_CLE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_CLE_P) >> 3) & 0x1) +#define LTQ_EBU_NAND_CON_CLE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CLE_P) | (((val) & 0x1) << 3)) +/* Set ALE Active Polarity (2) */ +#define LTQ_EBU_NAND_CON_ALE_P (0x1 << 2) +#define LTQ_EBU_NAND_CON_ALE_P_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_NAND_CON_ALE_P_GET(val) ((((val) & LTQ_EBU_NAND_CON_ALE_P) >> 2) & 0x1) +#define LTQ_EBU_NAND_CON_ALE_P_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_ALE_P) | (((val) & 0x1) << 2)) +/* NAND CS Mux with EBU CS Enable (1) */ +#define LTQ_EBU_NAND_CON_CSMUX_E (0x1 << 1) +#define LTQ_EBU_NAND_CON_CSMUX_E_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_NAND_CON_CSMUX_E_GET(val) ((((val) & LTQ_EBU_NAND_CON_CSMUX_E) >> 1) & 0x1) +#define LTQ_EBU_NAND_CON_CSMUX_E_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_CSMUX_E) | (((val) & 0x1) << 1)) +/* NAND FLASH Mode Support (0) */ +#define LTQ_EBU_NAND_CON_NANDMODE (0x1) +#define LTQ_EBU_NAND_CON_NANDMODE_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_NAND_CON_NANDMODE_GET(val) ((((val) & LTQ_EBU_NAND_CON_NANDMODE) >> 0) & 0x1) +#define LTQ_EBU_NAND_CON_NANDMODE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_CON_NANDMODE) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * NAND Flash State Register + ******************************************************************************/ + +/* Reserved (31:3) */ +#define LTQ_EBU_NAND_WAIT_RES (0x1fffffff << 3) +#define LTQ_EBU_NAND_WAIT_RES_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RES) >> 3) & 0x1fffffff) +/* NAND Write Complete (3) */ +#define LTQ_EBU_NAND_WAIT_WR_C (0x1 << 3) +#define LTQ_EBU_NAND_WAIT_WR_C_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_WR_C) >> 3) & 0x1) +/* Record the RD Edge (rising ) (2) */ +#define LTQ_EBU_NAND_WAIT_RD_EDGE (0x1 << 2) +#define LTQ_EBU_NAND_WAIT_RD_EDGE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RD_EDGE) >> 2) & 0x1) +/* Record the BY# Edge (falling) (1) */ +#define LTQ_EBU_NAND_WAIT_BY_EDGE (0x1 << 1) +#define LTQ_EBU_NAND_WAIT_BY_EDGE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_BY_EDGE) >> 1) & 0x1) +/* Rd/BY# value (0) */ +#define LTQ_EBU_NAND_WAIT_RDBY_VALUE (0x1) +#define LTQ_EBU_NAND_WAIT_RDBY_VALUE_GET(val) ((((val) & LTQ_EBU_NAND_WAIT_RDBY_VALUE) >> 0) & 0x1) + +/******************************************************************************* + * NAND ECC Result Register 0 + ******************************************************************************/ + +/* Reserved (31:24) */ +#define LTQ_EBU_NAND_ECC0_RES (0xff << 24) +#define LTQ_EBU_NAND_ECC0_RES_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_RES) >> 24) & 0xff) +/* ECC value (23:16) */ +#define LTQ_EBU_NAND_ECC0_ECC_B2 (0xff << 16) +#define LTQ_EBU_NAND_ECC0_ECC_B2_VAL(val) (((val) & 0xff) << 16) +#define LTQ_EBU_NAND_ECC0_ECC_B2_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B2) >> 16) & 0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B2_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B2) | (((val) & 0xff) << 16)) +/* ECC value (15:8) */ +#define LTQ_EBU_NAND_ECC0_ECC_B1 (0xff << 8) +#define LTQ_EBU_NAND_ECC0_ECC_B1_VAL(val) (((val) & 0xff) << 8) +#define LTQ_EBU_NAND_ECC0_ECC_B1_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B1) >> 8) & 0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B1_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B1) | (((val) & 0xff) << 8)) +/* ECC value (7:0) */ +#define LTQ_EBU_NAND_ECC0_ECC_B0 (0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B0_VAL(val) (((val) & 0xff) << 0) +#define LTQ_EBU_NAND_ECC0_ECC_B0_GET(val) ((((val) & LTQ_EBU_NAND_ECC0_ECC_B0) >> 0) & 0xff) +#define LTQ_EBU_NAND_ECC0_ECC_B0_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC0_ECC_B0) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * NAND ECC Address Counter Register + ******************************************************************************/ + +/* Reserved (31:9) */ +#define LTQ_EBU_NAND_ECC_AC_RES (0x7fffff << 9) +#define LTQ_EBU_NAND_ECC_AC_RES_GET(val) ((((val) & LTQ_EBU_NAND_ECC_AC_RES) >> 9) & 0x7fffff) +/* ECC address counter (8:0) */ +#define LTQ_EBU_NAND_ECC_AC_ECC_AC (0x1ff) +#define LTQ_EBU_NAND_ECC_AC_ECC_AC_VAL(val) (((val) & 0x1ff) << 0) +#define LTQ_EBU_NAND_ECC_AC_ECC_AC_GET(val) ((((val) & LTQ_EBU_NAND_ECC_AC_ECC_AC) >> 0) & 0x1ff) +#define LTQ_EBU_NAND_ECC_AC_ECC_AC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_NAND_ECC_AC_ECC_AC) | (((val) & 0x1ff) << 0)) + +/******************************************************************************* + * Internal Address Emulation Register + ******************************************************************************/ + +/* Memory Region Base Address (31:12) */ +#define LTQ_EBU_EMU_ADDR_BASE (0xfffff << 12) +#define LTQ_EBU_EMU_ADDR_BASE_VAL(val) (((val) & 0xfffff) << 12) +#define LTQ_EBU_EMU_ADDR_BASE_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_BASE) >> 12) & 0xfffff) +#define LTQ_EBU_EMU_ADDR_BASE_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_BASE) | (((val) & 0xfffff) << 12)) +/* Memory Region Address Mask (7:4) */ +#define LTQ_EBU_EMU_ADDR_MASK (0xf << 4) +#define LTQ_EBU_EMU_ADDR_MASK_VAL(val) (((val) & 0xf) << 4) +#define LTQ_EBU_EMU_ADDR_MASK_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MASK) >> 4) & 0xf) +#define LTQ_EBU_EMU_ADDR_MASK_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MASK) | (((val) & 0xf) << 4)) +/* Memory Region Mirror Segment B Control (1) */ +#define LTQ_EBU_EMU_ADDR_MRMB (0x1 << 1) +#define LTQ_EBU_EMU_ADDR_MRMB_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_EMU_ADDR_MRMB_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MRMB) >> 1) & 0x1) +#define LTQ_EBU_EMU_ADDR_MRMB_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MRMB) | (((val) & 0x1) << 1)) +/* Memory Region Enable Control (0) */ +#define LTQ_EBU_EMU_ADDR_MREC (0x1) +#define LTQ_EBU_EMU_ADDR_MREC_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_EMU_ADDR_MREC_GET(val) ((((val) & LTQ_EBU_EMU_ADDR_MREC) >> 0) & 0x1) +#define LTQ_EBU_EMU_ADDR_MREC_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_ADDR_MREC) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * nternal Emulator Configuration Register + ******************************************************************************/ + +/* Overlay Memory Control Region 3 (3) */ +#define LTQ_EBU_EMU_CON_OVL3 (0x1 << 3) +#define LTQ_EBU_EMU_CON_OVL3_VAL(val) (((val) & 0x1) << 3) +#define LTQ_EBU_EMU_CON_OVL3_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL3) >> 3) & 0x1) +#define LTQ_EBU_EMU_CON_OVL3_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL3) | (((val) & 0x1) << 3)) +/* Overlay Memory Control Region 2 (2) */ +#define LTQ_EBU_EMU_CON_OVL2 (0x1 << 2) +#define LTQ_EBU_EMU_CON_OVL2_VAL(val) (((val) & 0x1) << 2) +#define LTQ_EBU_EMU_CON_OVL2_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL2) >> 2) & 0x1) +#define LTQ_EBU_EMU_CON_OVL2_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL2) | (((val) & 0x1) << 2)) +/* Overlay Memory Control Region 1 (1) */ +#define LTQ_EBU_EMU_CON_OVL1 (0x1 << 1) +#define LTQ_EBU_EMU_CON_OVL1_VAL(val) (((val) & 0x1) << 1) +#define LTQ_EBU_EMU_CON_OVL1_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL1) >> 1) & 0x1) +#define LTQ_EBU_EMU_CON_OVL1_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL1) | (((val) & 0x1) << 1)) +/* Overlay Memory Control Region 0 (0) */ +#define LTQ_EBU_EMU_CON_OVL0 (0x1) +#define LTQ_EBU_EMU_CON_OVL0_VAL(val) (((val) & 0x1) << 0) +#define LTQ_EBU_EMU_CON_OVL0_GET(val) ((((val) & LTQ_EBU_EMU_CON_OVL0) >> 0) & 0x1) +#define LTQ_EBU_EMU_CON_OVL0_SET(reg,val) (reg) = ((reg & ~LTQ_EBU_EMU_CON_OVL0) | (((val) & 0x1) << 0)) + +#endif /* __LTQ_EBU_H */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/es_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/es_reg.h new file mode 100644 index 0000000000..da84900f5e --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/es_reg.h @@ -0,0 +1,2098 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __ES_REG_H +#define __ES_REG_H + +#define es_r32(reg) ltq_r32(&es->reg) +#define es_w32(val, reg) ltq_w32(val, &es->reg) +#define es_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &es->reg) + +/** ES register structure */ +struct svip_reg_es { + volatile unsigned long ps; /* 0x0000 */ + volatile unsigned long p0_ctl; /* 0x0004 */ + volatile unsigned long p1_ctl; /* 0x0008 */ + volatile unsigned long p2_ctl; /* 0x000C */ + volatile unsigned long p0_vlan; /* 0x0010 */ + volatile unsigned long p1_vlan; /* 0x0014 */ + volatile unsigned long p2_vlan; /* 0x0018 */ + volatile unsigned long reserved1[1]; /* 0x001C */ + volatile unsigned long p0_inctl; /* 0x0020 */ + volatile unsigned long p1_inctl; /* 0x0024 */ + volatile unsigned long p2_inctl; /* 0x0028 */ + volatile unsigned long reserved2[1]; /* 0x002C */ + volatile unsigned long p0_ecs_q32; /* 0x0030 */ + volatile unsigned long p0_ecs_q10; /* 0x0034 */ + volatile unsigned long p0_ecw_q32; /* 0x0038 */ + volatile unsigned long p0_ecw_q10; /* 0x003C */ + volatile unsigned long p1_ecs_q32; /* 0x0040 */ + volatile unsigned long p1_ecs_q10; /* 0x0044 */ + volatile unsigned long p1_ecw_q32; /* 0x0048 */ + volatile unsigned long p1_ecw_q10; /* 0x004C */ + volatile unsigned long p2_ecs_q32; /* 0x0050 */ + volatile unsigned long p2_ecs_q10; /* 0x0054 */ + volatile unsigned long p2_ecw_q32; /* 0x0058 */ + volatile unsigned long p2_ecw_q10; /* 0x005C */ + volatile unsigned long int_ena; /* 0x0060 */ + volatile unsigned long int_st; /* 0x0064 */ + volatile unsigned long sw_gctl0; /* 0x0068 */ + volatile unsigned long sw_gctl1; /* 0x006C */ + volatile unsigned long arp; /* 0x0070 */ + volatile unsigned long strm_ctl; /* 0x0074 */ + volatile unsigned long rgmii_ctl; /* 0x0078 */ + volatile unsigned long prt_1p; /* 0x007C */ + volatile unsigned long gbkt_szbs; /* 0x0080 */ + volatile unsigned long gbkt_szebs; /* 0x0084 */ + volatile unsigned long bf_th; /* 0x0088 */ + volatile unsigned long pmac_hd_ctl; /* 0x008C */ + volatile unsigned long pmac_sa1; /* 0x0090 */ + volatile unsigned long pmac_sa2; /* 0x0094 */ + volatile unsigned long pmac_da1; /* 0x0098 */ + volatile unsigned long pmac_da2; /* 0x009C */ + volatile unsigned long pmac_vlan; /* 0x00A0 */ + volatile unsigned long pmac_tx_ipg; /* 0x00A4 */ + volatile unsigned long pmac_rx_ipg; /* 0x00A8 */ + volatile unsigned long adr_tb_ctl0; /* 0x00AC */ + volatile unsigned long adr_tb_ctl1; /* 0x00B0 */ + volatile unsigned long adr_tb_ctl2; /* 0x00B4 */ + volatile unsigned long adr_tb_st0; /* 0x00B8 */ + volatile unsigned long adr_tb_st1; /* 0x00BC */ + volatile unsigned long adr_tb_st2; /* 0x00C0 */ + volatile unsigned long rmon_ctl; /* 0x00C4 */ + volatile unsigned long rmon_st; /* 0x00C8 */ + volatile unsigned long mdio_ctl; /* 0x00CC */ + volatile unsigned long mdio_data; /* 0x00D0 */ + volatile unsigned long tp_flt_act; /* 0x00D4 */ + volatile unsigned long prtcl_flt_act; /* 0x00D8 */ + volatile unsigned long reserved4[9]; /* 0xdc */ + volatile unsigned long vlan_flt0; /* 0x0100 */ + volatile unsigned long vlan_flt1; /* 0x0104 */ + volatile unsigned long vlan_flt2; /* 0x0108 */ + volatile unsigned long vlan_flt3; /* 0x010C */ + volatile unsigned long vlan_flt4; /* 0x0110 */ + volatile unsigned long vlan_flt5; /* 0x0114 */ + volatile unsigned long vlan_flt6; /* 0x0118 */ + volatile unsigned long vlan_flt7; /* 0x011C */ + volatile unsigned long vlan_flt8; /* 0x0120 */ + volatile unsigned long vlan_flt9; /* 0x0124 */ + volatile unsigned long vlan_flt10; /* 0x0128 */ + volatile unsigned long vlan_flt11; /* 0x012C */ + volatile unsigned long vlan_flt12; /* 0x0130 */ + volatile unsigned long vlan_flt13; /* 0x0134 */ + volatile unsigned long vlan_flt14; /* 0x0138 */ + volatile unsigned long vlan_flt15; /* 0x013C */ + volatile unsigned long tp_flt10; /* 0x0140 */ + volatile unsigned long tp_flt32; /* 0x0144 */ + volatile unsigned long tp_flt54; /* 0x0148 */ + volatile unsigned long tp_flt76; /* 0x014C */ + volatile unsigned long dfsrv_map0; /* 0x0150 */ + volatile unsigned long dfsrv_map1; /* 0x0154 */ + volatile unsigned long dfsrv_map2; /* 0x0158 */ + volatile unsigned long dfsrv_map3; /* 0x015C */ + volatile unsigned long tcp_pf0; /* 0x0160 */ + volatile unsigned long tcp_pf1; /* 0x0164 */ + volatile unsigned long tcp_pf2; /* 0x0168 */ + volatile unsigned long tcp_pf3; /* 0x016C */ + volatile unsigned long tcp_pf4; /* 0x0170 */ + volatile unsigned long tcp_pf5; /* 0x0174 */ + volatile unsigned long tcp_pf6; /* 0x0178 */ + volatile unsigned long tcp_pf7; /* 0x017C */ + volatile unsigned long ra_03_00; /* 0x0180 */ + volatile unsigned long ra_07_04; /* 0x0184 */ + volatile unsigned long ra_0b_08; /* 0x0188 */ + volatile unsigned long ra_0f_0c; /* 0x018C */ + volatile unsigned long ra_13_10; /* 0x0190 */ + volatile unsigned long ra_17_14; /* 0x0194 */ + volatile unsigned long ra_1b_18; /* 0x0198 */ + volatile unsigned long ra_1f_1c; /* 0x019C */ + volatile unsigned long ra_23_20; /* 0x01A0 */ + volatile unsigned long ra_27_24; /* 0x01A4 */ + volatile unsigned long ra_2b_28; /* 0x01A8 */ + volatile unsigned long ra_2f_2c; /* 0x01AC */ + volatile unsigned long prtcl_f0; /* 0x01B0 */ + volatile unsigned long prtcl_f1; /* 0x01B4 */ +}; + +/******************************************************************************* + * ES + ******************************************************************************/ +#define LTQ_ES_PS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0000)) +#define LTQ_ES_P0_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0004)) +#define LTQ_ES_P1_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0008)) +#define LTQ_ES_P2_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x000C)) +#define LTQ_ES_P0_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0010)) +#define LTQ_ES_P1_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0014)) +#define LTQ_ES_P2_VLAN_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0010)) +#define LTQ_ES_P0_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0020)) +#define LTQ_ES_P1_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0024)) +#define LTQ_ES_P2_INCTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0028)) +#define LTQ_ES_P0_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030)) +#define LTQ_ES_P0_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034)) +#define LTQ_ES_P0_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038)) +#define LTQ_ES_P0_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C)) +#define LTQ_ES_P1_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030)) +#define LTQ_ES_P1_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034)) +#define LTQ_ES_P1_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038)) +#define LTQ_ES_P1_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C)) +#define LTQ_ES_P2_ECS_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0030)) +#define LTQ_ES_P2_ECS_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0034)) +#define LTQ_ES_P2_ECW_Q32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0038)) +#define LTQ_ES_P2_ECW_Q10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x003C)) +#define LTQ_ES_INT_ENA_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0060)) +#define LTQ_ES_INT_ST_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0064)) +#define LTQ_ES_SW_GCTL0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0068)) +#define LTQ_ES_SW_GCTL1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x006C)) +#define LTQ_ES_ARP_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0070)) +#define LTQ_ES_STRM_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0074)) +#define LTQ_ES_RGMII_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0078)) +#define LTQ_ES_PRT_1P_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x007C)) +#define LTQ_ES_GBKT_SZBS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0080)) +#define LTQ_ES_GBKT_SZEBS_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0084)) +#define LTQ_ES_BF_TH_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0088)) +#define LTQ_ES_PMAC_HD_CTL ((volatile unsigned int*)(LTQ_ES_BASE + 0x008C)) +#define LTQ_ES_PMAC_SA1 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0090)) +#define LTQ_ES_PMAC_SA2 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0094)) +#define LTQ_ES_PMAC_DA1 ((volatile unsigned int*)(LTQ_ES_BASE + 0x0098)) +#define LTQ_ES_PMAC_DA2 ((volatile unsigned int*)(LTQ_ES_BASE + 0x009C)) +#define LTQ_ES_PMAC_VLAN ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A0)) +#define LTQ_ES_PMAC_TX_IPG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A4)) +#define LTQ_ES_PMAC_RX_IPG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00A8)) +#define LTQ_ES_ADR_TB_CTL0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00AC)) +#define LTQ_ES_ADR_TB_CTL1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B0)) +#define LTQ_ES_ADR_TB_CTL2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B4)) +#define LTQ_ES_ADR_TB_ST0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00B8)) +#define LTQ_ES_ADR_TB_ST1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00BC)) +#define LTQ_ES_ADR_TB_ST2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C0)) +#define LTQ_ES_RMON_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C4)) +#define LTQ_ES_RMON_ST_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00C8)) +#define LTQ_ES_MDIO_CTL_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00CC)) +#define LTQ_ES_MDIO_DATA_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D0)) +#define LTQ_ES_TP_FLT_ACT_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D4)) +#define LTQ_ES_PRTCL_FLT_ACT_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x00D8)) +#define LTQ_ES_VLAN_FLT0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0100)) +#define LTQ_ES_VLAN_FLT1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0104)) +#define LTQ_ES_VLAN_FLT2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0108)) +#define LTQ_ES_VLAN_FLT3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x010C)) +#define LTQ_ES_VLAN_FLT4_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0110)) +#define LTQ_ES_VLAN_FLT5_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0114)) +#define LTQ_ES_VLAN_FLT6_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0118)) +#define LTQ_ES_VLAN_FLT7_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x011C)) +#define LTQ_ES_VLAN_FLT8_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0120)) +#define LTQ_ES_VLAN_FLT9_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0124)) +#define LTQ_ES_VLAN_FLT10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0128)) +#define LTQ_ES_VLAN_FLT11_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x012C)) +#define LTQ_ES_VLAN_FLT12_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0130)) +#define LTQ_ES_VLAN_FLT13_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0134)) +#define LTQ_ES_VLAN_FLT14_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0138)) +#define LTQ_ES_VLAN_FLT15_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x013C)) +#define LTQ_ES_TP_FLT10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0140)) +#define LTQ_ES_TP_FLT32_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0144)) +#define LTQ_ES_TP_FLT54_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0148)) +#define LTQ_ES_TP_FLT76_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x014C)) +#define LTQ_ES_DFSRV_MAP0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0150)) +#define LTQ_ES_DFSRV_MAP1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0154)) +#define LTQ_ES_DFSRV_MAP2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0158)) +#define LTQ_ES_DFSRV_MAP3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x015C)) +#define LTQ_ES_TCP_PF0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0160)) +#define LTQ_ES_TCP_PF1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0164)) +#define LTQ_ES_TCP_PF2_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0168)) +#define LTQ_ES_TCP_PF3_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x016C)) +#define LTQ_ES_TCP_PF4_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0170)) +#define LTQ_ES_TCP_PF5_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0174)) +#define LTQ_ES_TCP_PF6_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0178)) +#define LTQ_ES_TCP_PF7_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x017C)) +#define LTQ_ES_RA_03_00_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0180)) +#define LTQ_ES_RA_07_04_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0184)) +#define LTQ_ES_RA_0B_08_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0188)) +#define LTQ_ES_RA_0F_0C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x018C)) +#define LTQ_ES_RA_13_10_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0190)) +#define LTQ_ES_RA_17_14_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0194)) +#define LTQ_ES_RA_1B_18_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x0198)) +#define LTQ_ES_RA_1F_1C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x019C)) +#define LTQ_ES_RA_23_20_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A0)) +#define LTQ_ES_RA_27_24_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A4)) +#define LTQ_ES_RA_2B_28_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01A8)) +#define LTQ_ES_RA_2F_2C_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01AC)) +#define LTQ_ES_PRTCL_F0_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01B0)) +#define LTQ_ES_PRTCL_F1_REG ((volatile unsigned int*)(LTQ_ES_BASE + 0x01B4)) + +/******************************************************************************* + * Port Status Register + ******************************************************************************/ + +/* Port 1 Flow Control Status (12) */ +#define LTQ_ES_PS_REG_P1FCS (0x1 << 12) +#define LTQ_ES_PS_REG_P1FCS_GET(val) ((((val) & LTQ_ES_PS_REG_P1FCS) >> 12) & 0x1) +/* Port 1 Duplex Status (11) */ +#define LTQ_ES_PS_REG_P1DS (0x1 << 11) +#define LTQ_ES_PS_REG_P1DS_GET(val) ((((val) & LTQ_ES_PS_REG_P1DS) >> 11) & 0x1) +/* Port 1 Speed High Status (10) */ +#define LTQ_ES_PS_REG_P1SHS (0x1 << 10) +#define LTQ_ES_PS_REG_P1SHS_GET(val) ((((val) & LTQ_ES_PS_REG_P1SHS) >> 10) & 0x1) +/* Port 1 Speed Status (9) */ +#define LTQ_ES_PS_REG_P1SS (0x1 << 9) +#define LTQ_ES_PS_REG_P1SS_GET(val) ((((val) & LTQ_ES_PS_REG_P1SS) >> 9) & 0x1) +/* Port 1 Link Status (8) */ +#define LTQ_ES_PS_REG_P1LS (0x1 << 8) +#define LTQ_ES_PS_REG_P1LS_GET(val) ((((val) & LTQ_ES_PS_REG_P1LS) >> 8) & 0x1) +/* Port 0 Flow Control Status (4) */ +#define LTQ_ES_PS_REG_P0FCS (0x1 << 4) +#define LTQ_ES_PS_REG_P0FCS_GET(val) ((((val) & LTQ_ES_PS_REG_P0FCS) >> 4) & 0x1) +/* Port 0 Duplex Status (3) */ +#define LTQ_ES_PS_REG_P0DS (0x1 << 3) +#define LTQ_ES_PS_REG_P0DS_GET(val) ((((val) & LTQ_ES_PS_REG_P0DS) >> 3) & 0x1) +/* Port 0 Speed High Status (2) */ +#define LTQ_ES_PS_REG_P0SHS (0x1 << 2) +#define LTQ_ES_PS_REG_P0SHS_GET(val) ((((val) & LTQ_ES_PS_REG_P0SHS) >> 2) & 0x1) +/* Port 0 Speed Status (1) */ +#define LTQ_ES_PS_REG_P0SS (0x1 << 1) +#define LTQ_ES_PS_REG_P0SS_GET(val) ((((val) & LTQ_ES_PS_REG_P0SS) >> 1) & 0x1) +/* Port 0 Link Status (0) */ +#define LTQ_ES_PS_REG_P0LS (0x1) +#define LTQ_ES_PS_REG_P0LS_GET(val) ((((val) & LTQ_ES_PS_REG_P0LS) >> 0) & 0x1) + +/******************************************************************************* + * P0 Control Register + ******************************************************************************/ + +/* STP/RSTP port state (31:30) */ +#define LTQ_ES_P0_CTL_REG_SPS (0x3 << 30) +#define LTQ_ES_P0_CTL_REG_SPS_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_P0_CTL_REG_SPS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_SPS) >> 30) & 0x3) +#define LTQ_ES_P0_CTL_REG_SPS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_SPS) | (((val) & 0x3) << 30)) +/* TCP/UDP PRIEN (29) */ +#define LTQ_ES_P0_CTL_REG_TCPE (0x1 << 29) +#define LTQ_ES_P0_CTL_REG_TCPE_VAL(val) (((val) & 0x1) << 29) +#define LTQ_ES_P0_CTL_REG_TCPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_TCPE) >> 29) & 0x1) +#define LTQ_ES_P0_CTL_REG_TCPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_TCPE) | (((val) & 0x1) << 29)) +/* IP over TCP/UDP (28) */ +#define LTQ_ES_P0_CTL_REG_IPOVTU (0x1 << 28) +#define LTQ_ES_P0_CTL_REG_IPOVTU_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_P0_CTL_REG_IPOVTU_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPOVTU) >> 28) & 0x1) +#define LTQ_ES_P0_CTL_REG_IPOVTU_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPOVTU) | (((val) & 0x1) << 28)) +/* VLAN Priority Enable (27) */ +#define LTQ_ES_P0_CTL_REG_VPE (0x1 << 27) +#define LTQ_ES_P0_CTL_REG_VPE_VAL(val) (((val) & 0x1) << 27) +#define LTQ_ES_P0_CTL_REG_VPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_VPE) >> 27) & 0x1) +#define LTQ_ES_P0_CTL_REG_VPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_VPE) | (((val) & 0x1) << 27)) +/* Service Priority Enable (26) */ +#define LTQ_ES_P0_CTL_REG_SPE (0x1 << 26) +#define LTQ_ES_P0_CTL_REG_SPE_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_P0_CTL_REG_SPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_SPE) >> 26) & 0x1) +#define LTQ_ES_P0_CTL_REG_SPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_SPE) | (((val) & 0x1) << 26)) +/* IP over VLAN PRI (25) */ +#define LTQ_ES_P0_CTL_REG_IPVLAN (0x1 << 25) +#define LTQ_ES_P0_CTL_REG_IPVLAN_VAL(val) (((val) & 0x1) << 25) +#define LTQ_ES_P0_CTL_REG_IPVLAN_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPVLAN) >> 25) & 0x1) +#define LTQ_ES_P0_CTL_REG_IPVLAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPVLAN) | (((val) & 0x1) << 25)) +/* Ether Type Priority Enable (24) */ +#define LTQ_ES_P0_CTL_REG_TPE (0x1 << 24) +#define LTQ_ES_P0_CTL_REG_TPE_VAL(val) (((val) & 0x1) << 24) +#define LTQ_ES_P0_CTL_REG_TPE_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_TPE) >> 24) & 0x1) +#define LTQ_ES_P0_CTL_REG_TPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_TPE) | (((val) & 0x1) << 24)) +/* Force Link Up (18) */ +#define LTQ_ES_P0_CTL_REG_FLP (0x1 << 18) +#define LTQ_ES_P0_CTL_REG_FLP_VAL(val) (((val) & 0x1) << 18) +#define LTQ_ES_P0_CTL_REG_FLP_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_FLP) >> 18) & 0x1) +#define LTQ_ES_P0_CTL_REG_FLP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_FLP) | (((val) & 0x1) << 18)) +/* Force Link Down (17) */ +#define LTQ_ES_P0_CTL_REG_FLD (0x1 << 17) +#define LTQ_ES_P0_CTL_REG_FLD_VAL(val) (((val) & 0x1) << 17) +#define LTQ_ES_P0_CTL_REG_FLD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_FLD) >> 17) & 0x1) +#define LTQ_ES_P0_CTL_REG_FLD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_FLD) | (((val) & 0x1) << 17)) +/* Ratio Mode for WFQ (16) */ +#define LTQ_ES_P0_CTL_REG_RMWFQ (0x1 << 16) +#define LTQ_ES_P0_CTL_REG_RMWFQ_VAL(val) (((val) & 0x1) << 16) +#define LTQ_ES_P0_CTL_REG_RMWFQ_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_RMWFQ) >> 16) & 0x1) +#define LTQ_ES_P0_CTL_REG_RMWFQ_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_RMWFQ) | (((val) & 0x1) << 16)) +/* Aging Disable (15) */ +#define LTQ_ES_P0_CTL_REG_AD (0x1 << 15) +#define LTQ_ES_P0_CTL_REG_AD_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_P0_CTL_REG_AD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_AD) >> 15) & 0x1) +#define LTQ_ES_P0_CTL_REG_AD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_AD) | (((val) & 0x1) << 15)) +/* Learning Disable (14) */ +#define LTQ_ES_P0_CTL_REG_LD (0x1 << 14) +#define LTQ_ES_P0_CTL_REG_LD_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_P0_CTL_REG_LD_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_LD) >> 14) & 0x1) +#define LTQ_ES_P0_CTL_REG_LD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_LD) | (((val) & 0x1) << 14)) +/* Maximum Number of Addresses (12:8) */ +#define LTQ_ES_P0_CTL_REG_MNA024 (0x1f << 8) +#define LTQ_ES_P0_CTL_REG_MNA024_VAL(val) (((val) & 0x1f) << 8) +#define LTQ_ES_P0_CTL_REG_MNA024_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_MNA024) >> 8) & 0x1f) +#define LTQ_ES_P0_CTL_REG_MNA024_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_MNA024) | (((val) & 0x1f) << 8)) +/* PPPOE Port Only (7) */ +#define LTQ_ES_P0_CTL_REG_PPPOEP (0x1 << 7) +#define LTQ_ES_P0_CTL_REG_PPPOEP_VAL(val) (((val) & 0x1) << 7) +#define LTQ_ES_P0_CTL_REG_PPPOEP_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PPPOEP) >> 7) & 0x1) +#define LTQ_ES_P0_CTL_REG_PPPOEP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PPPOEP) | (((val) & 0x1) << 7)) +/* PPPOE Manage (6) */ +#define LTQ_ES_P0_CTL_REG_PM (0x1 << 6) +#define LTQ_ES_P0_CTL_REG_PM_VAL(val) (((val) & 0x1) << 6) +#define LTQ_ES_P0_CTL_REG_PM_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PM) >> 6) & 0x1) +#define LTQ_ES_P0_CTL_REG_PM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PM) | (((val) & 0x1) << 6)) +/* Port Mirror Option (5:4) */ +#define LTQ_ES_P0_CTL_REG_IPMO (0x3 << 4) +#define LTQ_ES_P0_CTL_REG_IPMO_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_P0_CTL_REG_IPMO_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_IPMO) >> 4) & 0x3) +#define LTQ_ES_P0_CTL_REG_IPMO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_IPMO) | (((val) & 0x3) << 4)) +/* 802.1x Port Authorized state (3:2) */ +#define LTQ_ES_P0_CTL_REG_PAS (0x3 << 2) +#define LTQ_ES_P0_CTL_REG_PAS_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_P0_CTL_REG_PAS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_PAS) >> 2) & 0x3) +#define LTQ_ES_P0_CTL_REG_PAS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_PAS) | (((val) & 0x3) << 2)) +/* Drop Scheme for voilation 802.1x (1) */ +#define LTQ_ES_P0_CTL_REG_DSV8021X (0x1 << 1) +#define LTQ_ES_P0_CTL_REG_DSV8021X_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_P0_CTL_REG_DSV8021X_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_DSV8021X) >> 1) & 0x1) +#define LTQ_ES_P0_CTL_REG_DSV8021X_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_DSV8021X) | (((val) & 0x1) << 1)) +/* ByPass Mode for Output (0) */ +#define LTQ_ES_P0_CTL_REG_BYPASS (0x1) +#define LTQ_ES_P0_CTL_REG_BYPASS_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_P0_CTL_REG_BYPASS_GET(val) ((((val) & LTQ_ES_P0_CTL_REG_BYPASS) >> 0) & 0x1) +#define LTQ_ES_P0_CTL_REG_BYPASS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_CTL_REG_BYPASS) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 VLAN Control Register + ******************************************************************************/ + +/* Default FID (31:30) */ +#define LTQ_ES_P0_VLAN_REG_DFID (0x3 << 30) +#define LTQ_ES_P0_VLAN_REG_DFID_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_P0_VLAN_REG_DFID_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_DFID) >> 30) & 0x3) +#define LTQ_ES_P0_VLAN_REG_DFID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_DFID) | (((val) & 0x3) << 30)) +/* Tagged Base VLAN Enable (29) */ +#define LTQ_ES_P0_VLAN_REG_TBVE (0x1 << 29) +#define LTQ_ES_P0_VLAN_REG_TBVE_VAL(val) (((val) & 0x1) << 29) +#define LTQ_ES_P0_VLAN_REG_TBVE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_TBVE) >> 29) & 0x1) +#define LTQ_ES_P0_VLAN_REG_TBVE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_TBVE) | (((val) & 0x1) << 29)) +/* Input Force No TAG Enable (28) */ +#define LTQ_ES_P0_VLAN_REG_IFNTE (0x1 << 28) +#define LTQ_ES_P0_VLAN_REG_IFNTE_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_P0_VLAN_REG_IFNTE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_IFNTE) >> 28) & 0x1) +#define LTQ_ES_P0_VLAN_REG_IFNTE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_IFNTE) | (((val) & 0x1) << 28)) +/* VID Check with the VID table (27) */ +#define LTQ_ES_P0_VLAN_REG_VC (0x1 << 27) +#define LTQ_ES_P0_VLAN_REG_VC_VAL(val) (((val) & 0x1) << 27) +#define LTQ_ES_P0_VLAN_REG_VC_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VC) >> 27) & 0x1) +#define LTQ_ES_P0_VLAN_REG_VC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VC) | (((val) & 0x1) << 27)) +/* VLAN Security Disable (26) */ +#define LTQ_ES_P0_VLAN_REG_VSD (0x1 << 26) +#define LTQ_ES_P0_VLAN_REG_VSD_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_P0_VLAN_REG_VSD_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VSD) >> 26) & 0x1) +#define LTQ_ES_P0_VLAN_REG_VSD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VSD) | (((val) & 0x1) << 26)) +/* Admit Only VLAN_Tagged Packet (25) */ +#define LTQ_ES_P0_VLAN_REG_AOVTP (0x1 << 25) +#define LTQ_ES_P0_VLAN_REG_AOVTP_VAL(val) (((val) & 0x1) << 25) +#define LTQ_ES_P0_VLAN_REG_AOVTP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_AOVTP) >> 25) & 0x1) +#define LTQ_ES_P0_VLAN_REG_AOVTP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_AOVTP) | (((val) & 0x1) << 25)) +/* VLAN Member Check Enable (24) */ +#define LTQ_ES_P0_VLAN_REG_VMCE (0x1 << 24) +#define LTQ_ES_P0_VLAN_REG_VMCE_VAL(val) (((val) & 0x1) << 24) +#define LTQ_ES_P0_VLAN_REG_VMCE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_VMCE) >> 24) & 0x1) +#define LTQ_ES_P0_VLAN_REG_VMCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_VMCE) | (((val) & 0x1) << 24)) +/* Reserved (23:19) */ +#define LTQ_ES_P0_VLAN_REG_RES (0x1f << 19) +#define LTQ_ES_P0_VLAN_REG_RES_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_RES) >> 19) & 0x1f) +/* Default VLAN Port Map (18:16) */ +#define LTQ_ES_P0_VLAN_REG_DVPM (0x7 << 16) +#define LTQ_ES_P0_VLAN_REG_DVPM_VAL(val) (((val) & 0x7) << 16) +#define LTQ_ES_P0_VLAN_REG_DVPM_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_DVPM) >> 16) & 0x7) +#define LTQ_ES_P0_VLAN_REG_DVPM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_DVPM) | (((val) & 0x7) << 16)) +/* Port Priority (15:14) */ +#define LTQ_ES_P0_VLAN_REG_PP (0x3 << 14) +#define LTQ_ES_P0_VLAN_REG_PP_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_P0_VLAN_REG_PP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PP) >> 14) & 0x3) +#define LTQ_ES_P0_VLAN_REG_PP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PP) | (((val) & 0x3) << 14)) +/* Port Priority Enable (13) */ +#define LTQ_ES_P0_VLAN_REG_PPE (0x1 << 13) +#define LTQ_ES_P0_VLAN_REG_PPE_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_P0_VLAN_REG_PPE_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PPE) >> 13) & 0x1) +#define LTQ_ES_P0_VLAN_REG_PPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PPE) | (((val) & 0x1) << 13)) +/* Portbase VLAN tag member for Port 0 (12) */ +#define LTQ_ES_P0_VLAN_REG_PVTAGMP (0x1 << 12) +#define LTQ_ES_P0_VLAN_REG_PVTAGMP_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_P0_VLAN_REG_PVTAGMP_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PVTAGMP) >> 12) & 0x1) +#define LTQ_ES_P0_VLAN_REG_PVTAGMP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PVTAGMP) | (((val) & 0x1) << 12)) +/* PVID (11:0) */ +#define LTQ_ES_P0_VLAN_REG_PVID (0xfff) +#define LTQ_ES_P0_VLAN_REG_PVID_VAL(val) (((val) & 0xfff) << 0) +#define LTQ_ES_P0_VLAN_REG_PVID_GET(val) ((((val) & LTQ_ES_P0_VLAN_REG_PVID) >> 0) & 0xfff) +#define LTQ_ES_P0_VLAN_REG_PVID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_VLAN_REG_PVID) | (((val) & 0xfff) << 0)) + +/******************************************************************************* + * Port 0 Ingress Control Register + ******************************************************************************/ + +/* Reserved (31:13) */ +#define LTQ_ES_P0_INCTL_REG_RES (0x7ffff << 13) +#define LTQ_ES_P0_INCTL_REG_RES_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_RES) >> 13) & 0x7ffff) +/* Port 0 Ingress/Egress Timer Tick T selection (12:11) */ +#define LTQ_ES_P0_INCTL_REG_P0ITT (0x3 << 11) +#define LTQ_ES_P0_INCTL_REG_P0ITT_VAL(val) (((val) & 0x3) << 11) +#define LTQ_ES_P0_INCTL_REG_P0ITT_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_P0ITT) >> 11) & 0x3) +#define LTQ_ES_P0_INCTL_REG_P0ITT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_INCTL_REG_P0ITT) | (((val) & 0x3) << 11)) +/* Port 0 Igress Token R (10:0) */ +#define LTQ_ES_P0_INCTL_REG_P0ITR (0x7ff) +#define LTQ_ES_P0_INCTL_REG_P0ITR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_INCTL_REG_P0ITR_GET(val) ((((val) & LTQ_ES_P0_INCTL_REG_P0ITR) >> 0) & 0x7ff) +#define LTQ_ES_P0_INCTL_REG_P0ITR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_INCTL_REG_P0ITR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for Strict Q32 Register + ******************************************************************************/ + +/* Port 0 Egress Token R for Strict Priority Q3 (26:16) */ +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR (0x7ff << 16) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q32_REG_P0SPQ3TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for Strict Priority Q2 (10:0) */ +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR (0x7ff) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q32_REG_P0SPQ2TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for Strict Q10 Register + ******************************************************************************/ + +/* Reserved (31:27) */ +#define LTQ_ES_P0_ECS_Q10_REG_RES (0x1f << 27) +#define LTQ_ES_P0_ECS_Q10_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_RES) >> 27) & 0x1f) +/* Port 0 Egress Token R for Strict Priority Q1 (26:16) */ +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR (0x7ff << 16) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q10_REG_P0SPQ1TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for Strict Priority Q0 (10:0) */ +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR (0x7ff) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_GET(val) ((((val) & LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECS_Q10_REG_P0SPQ0TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for WFQ Q32 Register + ******************************************************************************/ + +/* Reserved (31:27) */ +#define LTQ_ES_P0_ECW_Q32_REG_RES (0x1f << 27) +#define LTQ_ES_P0_ECW_Q32_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_RES) >> 27) & 0x1f) +/* Port 0 Egress Token R for WFQ Q3 (26:16) */ +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR (0x7ff << 16) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q32_REG_P0WQ3TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for WFQ Q2 (10:0) */ +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR (0x7ff) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q32_REG_P0WQ2TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Port 0 Egress Control for WFQ Q10 Register + ******************************************************************************/ + +/* Reserved (31:27) */ +#define LTQ_ES_P0_ECW_Q10_REG_RES (0x1f << 27) +#define LTQ_ES_P0_ECW_Q10_REG_RES_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_RES) >> 27) & 0x1f) +/* Port 0 Egress Token R for WFQ Q1 (26:16) */ +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR (0x7ff << 16) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_VAL(val) (((val) & 0x7ff) << 16) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR) >> 16) & 0x7ff) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q10_REG_P0WQ1TR) | (((val) & 0x7ff) << 16)) +/* Port 0 Egress Token R for WFQ Q0 (10:0) */ +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR (0x7ff) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_GET(val) ((((val) & LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR) >> 0) & 0x7ff) +#define LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_P0_ECW_Q10_REG_P0WQ0TR) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Interrupt Enable Register + ******************************************************************************/ + +/* Reserved (31:8) */ +#define LTQ_ES_INT_ENA_REG_RES (0xffffff << 8) +#define LTQ_ES_INT_ENA_REG_RES_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_RES) >> 8) & 0xffffff) +/* Data Buffer is Full Interrupt Enable (7) */ +#define LTQ_ES_INT_ENA_REG_DBFIE (0x1 << 7) +#define LTQ_ES_INT_ENA_REG_DBFIE_VAL(val) (((val) & 0x1) << 7) +#define LTQ_ES_INT_ENA_REG_DBFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_DBFIE) >> 7) & 0x1) +#define LTQ_ES_INT_ENA_REG_DBFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_DBFIE) | (((val) & 0x1) << 7)) +/* Data Buffer is nearly Full Interrupt Enable (6) */ +#define LTQ_ES_INT_ENA_REG_DBNFIE (0x1 << 6) +#define LTQ_ES_INT_ENA_REG_DBNFIE_VAL(val) (((val) & 0x1) << 6) +#define LTQ_ES_INT_ENA_REG_DBNFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_DBNFIE) >> 6) & 0x1) +#define LTQ_ES_INT_ENA_REG_DBNFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_DBNFIE) | (((val) & 0x1) << 6)) +/* Learning Table Full Interrupt Enable (5) */ +#define LTQ_ES_INT_ENA_REG_LTFIE (0x1 << 5) +#define LTQ_ES_INT_ENA_REG_LTFIE_VAL(val) (((val) & 0x1) << 5) +#define LTQ_ES_INT_ENA_REG_LTFIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_LTFIE) >> 5) & 0x1) +#define LTQ_ES_INT_ENA_REG_LTFIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_LTFIE) | (((val) & 0x1) << 5)) +/* Leaning Table Access Done Interrupt Enable (4) */ +#define LTQ_ES_INT_ENA_REG_LTADIE (0x1 << 4) +#define LTQ_ES_INT_ENA_REG_LTADIE_VAL(val) (((val) & 0x1) << 4) +#define LTQ_ES_INT_ENA_REG_LTADIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_LTADIE) >> 4) & 0x1) +#define LTQ_ES_INT_ENA_REG_LTADIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_LTADIE) | (((val) & 0x1) << 4)) +/* Port Security Violation Interrupt Enable (3:1) */ +#define LTQ_ES_INT_ENA_REG_PSVIE (0x7 << 1) +#define LTQ_ES_INT_ENA_REG_PSVIE_VAL(val) (((val) & 0x7) << 1) +#define LTQ_ES_INT_ENA_REG_PSVIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_PSVIE) >> 1) & 0x7) +#define LTQ_ES_INT_ENA_REG_PSVIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_PSVIE) | (((val) & 0x7) << 1)) +/* Port Status Change Interrupt Enable (0) */ +#define LTQ_ES_INT_ENA_REG_PSCIE (0x1) +#define LTQ_ES_INT_ENA_REG_PSCIE_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_INT_ENA_REG_PSCIE_GET(val) ((((val) & LTQ_ES_INT_ENA_REG_PSCIE) >> 0) & 0x1) +#define LTQ_ES_INT_ENA_REG_PSCIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_INT_ENA_REG_PSCIE) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Interrupt Status Register + ******************************************************************************/ + +/* Reserved (31:8) */ +#define LTQ_ES_INT_ST_REG_RES (0xffffff << 8) +#define LTQ_ES_INT_ST_REG_RES_GET(val) ((((val) & LTQ_ES_INT_ST_REG_RES) >> 8) & 0xffffff) +/* Data Buffer is Full (7) */ +#define LTQ_ES_INT_ST_REG_DBF (0x1 << 7) +#define LTQ_ES_INT_ST_REG_DBF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_DBF) >> 7) & 0x1) +/* Data Buffer is nearly Full (6) */ +#define LTQ_ES_INT_ST_REG_DBNF (0x1 << 6) +#define LTQ_ES_INT_ST_REG_DBNF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_DBNF) >> 6) & 0x1) +/* Learning Table Full (5) */ +#define LTQ_ES_INT_ST_REG_LTF (0x1 << 5) +#define LTQ_ES_INT_ST_REG_LTF_GET(val) ((((val) & LTQ_ES_INT_ST_REG_LTF) >> 5) & 0x1) +/* Leaning Table Access Done (4) */ +#define LTQ_ES_INT_ST_REG_LTAD (0x1 << 4) +#define LTQ_ES_INT_ST_REG_LTAD_GET(val) ((((val) & LTQ_ES_INT_ST_REG_LTAD) >> 4) & 0x1) +/* Port Security Violation (3:1) */ +#define LTQ_ES_INT_ST_REG_PSV (0x7 << 1) +#define LTQ_ES_INT_ST_REG_PSV_GET(val) ((((val) & LTQ_ES_INT_ST_REG_PSV) >> 1) & 0x7) +/* Port Status Change (0) */ +#define LTQ_ES_INT_ST_REG_PSC (0x1) +#define LTQ_ES_INT_ST_REG_PSC_GET(val) ((((val) & LTQ_ES_INT_ST_REG_PSC) >> 0) & 0x1) + +/******************************************************************************* + * Switch Global Control Register 0 + ******************************************************************************/ + +/* Switch Enable (31) */ +#define LTQ_ES_SW_GCTL0_REG_SE (0x1 << 31) +#define LTQ_ES_SW_GCTL0_REG_SE_VAL(val) (((val) & 0x1) << 31) +#define LTQ_ES_SW_GCTL0_REG_SE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_SE) >> 31) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_SE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_SE) | (((val) & 0x1) << 31)) +/* CRC Check Disable (30) */ +#define LTQ_ES_SW_GCTL0_REG_ICRCCD (0x1 << 30) +#define LTQ_ES_SW_GCTL0_REG_ICRCCD_VAL(val) (((val) & 0x1) << 30) +#define LTQ_ES_SW_GCTL0_REG_ICRCCD_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_ICRCCD) >> 30) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_ICRCCD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_ICRCCD) | (((val) & 0x1) << 30)) +/* Replace VID0 (28) */ +#define LTQ_ES_SW_GCTL0_REG_RVID0 (0x1 << 28) +#define LTQ_ES_SW_GCTL0_REG_RVID0_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_SW_GCTL0_REG_RVID0_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVID0) >> 28) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_RVID0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVID0) | (((val) & 0x1) << 28)) +/* Replace VID1 (27) */ +#define LTQ_ES_SW_GCTL0_REG_RVID1 (0x1 << 27) +#define LTQ_ES_SW_GCTL0_REG_RVID1_VAL(val) (((val) & 0x1) << 27) +#define LTQ_ES_SW_GCTL0_REG_RVID1_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVID1) >> 27) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_RVID1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVID1) | (((val) & 0x1) << 27)) +/* Replace VIDFFF (26) */ +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF (0x1 << 26) +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_RVIDFFF) >> 26) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_RVIDFFF_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_RVIDFFF) | (((val) & 0x1) << 26)) +/* Priority Change Rule (25) */ +#define LTQ_ES_SW_GCTL0_REG_PCR (0x1 << 25) +#define LTQ_ES_SW_GCTL0_REG_PCR_VAL(val) (((val) & 0x1) << 25) +#define LTQ_ES_SW_GCTL0_REG_PCR_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PCR) >> 25) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_PCR_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PCR) | (((val) & 0x1) << 25)) +/* Priority Change Enable (24) */ +#define LTQ_ES_SW_GCTL0_REG_PCE (0x1 << 24) +#define LTQ_ES_SW_GCTL0_REG_PCE_VAL(val) (((val) & 0x1) << 24) +#define LTQ_ES_SW_GCTL0_REG_PCE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PCE) >> 24) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_PCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PCE) | (((val) & 0x1) << 24)) +/* Transmit Short IPG Enable (23) */ +#define LTQ_ES_SW_GCTL0_REG_TSIPGE (0x1 << 23) +#define LTQ_ES_SW_GCTL0_REG_TSIPGE_VAL(val) (((val) & 0x1) << 23) +#define LTQ_ES_SW_GCTL0_REG_TSIPGE_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_TSIPGE) >> 23) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_TSIPGE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_TSIPGE) | (((val) & 0x1) << 23)) +/* PHY Base Address (22) */ +#define LTQ_ES_SW_GCTL0_REG_PHYBA (0x1 << 22) +#define LTQ_ES_SW_GCTL0_REG_PHYBA_VAL(val) (((val) & 0x1) << 22) +#define LTQ_ES_SW_GCTL0_REG_PHYBA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_PHYBA) >> 22) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_PHYBA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_PHYBA) | (((val) & 0x1) << 22)) +/* Drop Packet When Excessive Collision Happen (21) */ +#define LTQ_ES_SW_GCTL0_REG_DPWECH (0x1 << 21) +#define LTQ_ES_SW_GCTL0_REG_DPWECH_VAL(val) (((val) & 0x1) << 21) +#define LTQ_ES_SW_GCTL0_REG_DPWECH_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DPWECH) >> 21) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_DPWECH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DPWECH) | (((val) & 0x1) << 21)) +/* Aging Timer Select (20:18) */ +#define LTQ_ES_SW_GCTL0_REG_ATS (0x7 << 18) +#define LTQ_ES_SW_GCTL0_REG_ATS_VAL(val) (((val) & 0x7) << 18) +#define LTQ_ES_SW_GCTL0_REG_ATS_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_ATS) >> 18) & 0x7) +#define LTQ_ES_SW_GCTL0_REG_ATS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_ATS) | (((val) & 0x7) << 18)) +/* Mirror CRC Also (17) */ +#define LTQ_ES_SW_GCTL0_REG_MCA (0x1 << 17) +#define LTQ_ES_SW_GCTL0_REG_MCA_VAL(val) (((val) & 0x1) << 17) +#define LTQ_ES_SW_GCTL0_REG_MCA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MCA) >> 17) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MCA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MCA) | (((val) & 0x1) << 17)) +/* Mirror RXER Also (16) */ +#define LTQ_ES_SW_GCTL0_REG_MRA (0x1 << 16) +#define LTQ_ES_SW_GCTL0_REG_MRA_VAL(val) (((val) & 0x1) << 16) +#define LTQ_ES_SW_GCTL0_REG_MRA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MRA) >> 16) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MRA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MRA) | (((val) & 0x1) << 16)) +/* Mirror PAUSE Also (15) */ +#define LTQ_ES_SW_GCTL0_REG_MPA (0x1 << 15) +#define LTQ_ES_SW_GCTL0_REG_MPA_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_SW_GCTL0_REG_MPA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MPA) >> 15) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MPA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MPA) | (((val) & 0x1) << 15)) +/* Mirror Long Also (14) */ +#define LTQ_ES_SW_GCTL0_REG_MLA (0x1 << 14) +#define LTQ_ES_SW_GCTL0_REG_MLA_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_SW_GCTL0_REG_MLA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MLA) >> 14) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MLA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MLA) | (((val) & 0x1) << 14)) +/* Mirror Short Also (13) */ +#define LTQ_ES_SW_GCTL0_REG_MSA (0x1 << 13) +#define LTQ_ES_SW_GCTL0_REG_MSA_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_SW_GCTL0_REG_MSA_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MSA) >> 13) & 0x1) +#define LTQ_ES_SW_GCTL0_REG_MSA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MSA) | (((val) & 0x1) << 13)) +/* Sniffer port number (12:11) */ +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN (0x3 << 11) +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_VAL(val) (((val) & 0x3) << 11) +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_SNIFFPN) >> 11) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_SNIFFPN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_SNIFFPN) | (((val) & 0x3) << 11)) +/* Max Packet Length (MAXPKTLEN) (9:8) */ +#define LTQ_ES_SW_GCTL0_REG_MPL (0x3 << 8) +#define LTQ_ES_SW_GCTL0_REG_MPL_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_SW_GCTL0_REG_MPL_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_MPL) >> 8) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_MPL_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_MPL) | (((val) & 0x3) << 8)) +/* Discard Mode (Drop scheme for Packets Classified as Q3) (7:6) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ3 (0x3 << 6) +#define LTQ_ES_SW_GCTL0_REG_DMQ3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_SW_GCTL0_REG_DMQ3_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ3) >> 6) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ3) | (((val) & 0x3) << 6)) +/* Discard Mode (Drop scheme for Packets Classified as Q2) (5:4) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ2 (0x3 << 4) +#define LTQ_ES_SW_GCTL0_REG_DMQ2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_SW_GCTL0_REG_DMQ2_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ2) >> 4) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ2) | (((val) & 0x3) << 4)) +/* Discard Mode (Drop scheme for Packets Classified as Q1) (3:2) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ1 (0x3 << 2) +#define LTQ_ES_SW_GCTL0_REG_DMQ1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_SW_GCTL0_REG_DMQ1_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ1) >> 2) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ1) | (((val) & 0x3) << 2)) +/* Discard Mode (Drop scheme for Packets Classified as Q0) (1:0) */ +#define LTQ_ES_SW_GCTL0_REG_DMQ0 (0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_SW_GCTL0_REG_DMQ0_GET(val) ((((val) & LTQ_ES_SW_GCTL0_REG_DMQ0) >> 0) & 0x3) +#define LTQ_ES_SW_GCTL0_REG_DMQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL0_REG_DMQ0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Switch Global Control Register 1 + ******************************************************************************/ + +/* BIST Done (27) */ +#define LTQ_ES_SW_GCTL1_REG_BISTDN (0x1 << 27) +#define LTQ_ES_SW_GCTL1_REG_BISTDN_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_BISTDN) >> 27) & 0x1) +/* Enable drop scheme of TX and RX (26) */ +#define LTQ_ES_SW_GCTL1_REG_EDSTX (0x1 << 26) +#define LTQ_ES_SW_GCTL1_REG_EDSTX_VAL(val) (((val) & 0x1) << 26) +#define LTQ_ES_SW_GCTL1_REG_EDSTX_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_EDSTX) >> 26) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_EDSTX_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_EDSTX) | (((val) & 0x1) << 26)) +/* Congestion threshold for TX queue (25:24) */ +#define LTQ_ES_SW_GCTL1_REG_CTTX (0x3 << 24) +#define LTQ_ES_SW_GCTL1_REG_CTTX_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_SW_GCTL1_REG_CTTX_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_CTTX) >> 24) & 0x3) +#define LTQ_ES_SW_GCTL1_REG_CTTX_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_CTTX) | (((val) & 0x3) << 24)) +/* Input Jam Threshold (23:21) */ +#define LTQ_ES_SW_GCTL1_REG_IJT (0x7 << 21) +#define LTQ_ES_SW_GCTL1_REG_IJT_VAL(val) (((val) & 0x7) << 21) +#define LTQ_ES_SW_GCTL1_REG_IJT_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_IJT) >> 21) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_IJT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_IJT) | (((val) & 0x7) << 21)) +/* Do not Identify VLAN after SNAP (20) */ +#define LTQ_ES_SW_GCTL1_REG_DIVS (0x1 << 20) +#define LTQ_ES_SW_GCTL1_REG_DIVS_VAL(val) (((val) & 0x1) << 20) +#define LTQ_ES_SW_GCTL1_REG_DIVS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIVS) >> 20) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIVS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIVS) | (((val) & 0x1) << 20)) +/* Do not Identify IPV6 in PPPOE (19) */ +#define LTQ_ES_SW_GCTL1_REG_DII6P (0x1 << 19) +#define LTQ_ES_SW_GCTL1_REG_DII6P_VAL(val) (((val) & 0x1) << 19) +#define LTQ_ES_SW_GCTL1_REG_DII6P_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DII6P) >> 19) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DII6P_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DII6P) | (((val) & 0x1) << 19)) +/* Do not Identify IP in PPPOE after SNAP (18) */ +#define LTQ_ES_SW_GCTL1_REG_DIIPS (0x1 << 18) +#define LTQ_ES_SW_GCTL1_REG_DIIPS_VAL(val) (((val) & 0x1) << 18) +#define LTQ_ES_SW_GCTL1_REG_DIIPS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIIPS) >> 18) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIIPS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIIPS) | (((val) & 0x1) << 18)) +/* Do not Identify Ether-Type = 0x0800, IP VER = 6 as IPV6 packets (17) */ +#define LTQ_ES_SW_GCTL1_REG_DIE (0x1 << 17) +#define LTQ_ES_SW_GCTL1_REG_DIE_VAL(val) (((val) & 0x1) << 17) +#define LTQ_ES_SW_GCTL1_REG_DIE_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIE) >> 17) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIE) | (((val) & 0x1) << 17)) +/* Do not Identify IP in PPPOE (16) */ +#define LTQ_ES_SW_GCTL1_REG_DIIP (0x1 << 16) +#define LTQ_ES_SW_GCTL1_REG_DIIP_VAL(val) (((val) & 0x1) << 16) +#define LTQ_ES_SW_GCTL1_REG_DIIP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIIP) >> 16) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIIP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIIP) | (((val) & 0x1) << 16)) +/* Do not Identify SNAP (15) */ +#define LTQ_ES_SW_GCTL1_REG_DIS (0x1 << 15) +#define LTQ_ES_SW_GCTL1_REG_DIS_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_SW_GCTL1_REG_DIS_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_DIS) >> 15) & 0x1) +#define LTQ_ES_SW_GCTL1_REG_DIS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_DIS) | (((val) & 0x1) << 15)) +/* Unicast Portmap (14:12) */ +#define LTQ_ES_SW_GCTL1_REG_UP (0x7 << 12) +#define LTQ_ES_SW_GCTL1_REG_UP_VAL(val) (((val) & 0x7) << 12) +#define LTQ_ES_SW_GCTL1_REG_UP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_UP) >> 12) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_UP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_UP) | (((val) & 0x7) << 12)) +/* Broadcast Portmap (10:8) */ +#define LTQ_ES_SW_GCTL1_REG_BP (0x7 << 8) +#define LTQ_ES_SW_GCTL1_REG_BP_VAL(val) (((val) & 0x7) << 8) +#define LTQ_ES_SW_GCTL1_REG_BP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_BP) >> 8) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_BP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_BP) | (((val) & 0x7) << 8)) +/* Multicast Portmap (6:4) */ +#define LTQ_ES_SW_GCTL1_REG_MP (0x7 << 4) +#define LTQ_ES_SW_GCTL1_REG_MP_VAL(val) (((val) & 0x7) << 4) +#define LTQ_ES_SW_GCTL1_REG_MP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_MP) >> 4) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_MP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_MP) | (((val) & 0x7) << 4)) +/* Reserve Portmap (2:0) */ +#define LTQ_ES_SW_GCTL1_REG_RP (0x7) +#define LTQ_ES_SW_GCTL1_REG_RP_VAL(val) (((val) & 0x7) << 0) +#define LTQ_ES_SW_GCTL1_REG_RP_GET(val) ((((val) & LTQ_ES_SW_GCTL1_REG_RP) >> 0) & 0x7) +#define LTQ_ES_SW_GCTL1_REG_RP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_SW_GCTL1_REG_RP) | (((val) & 0x7) << 0)) + +/******************************************************************************* + * ARP/RARP Register + ******************************************************************************/ + +/* MAC Control Action (15:14) */ +#define LTQ_ES_ARP_REG_MACA (0x3 << 14) +#define LTQ_ES_ARP_REG_MACA_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_ARP_REG_MACA_GET(val) ((((val) & LTQ_ES_ARP_REG_MACA) >> 14) & 0x3) +#define LTQ_ES_ARP_REG_MACA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_MACA) | (((val) & 0x3) << 14)) +/* Unicast packet Treated as Cross_VLAN packet (13) */ +#define LTQ_ES_ARP_REG_UPT (0x1 << 13) +#define LTQ_ES_ARP_REG_UPT_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_ARP_REG_UPT_GET(val) ((((val) & LTQ_ES_ARP_REG_UPT) >> 13) & 0x1) +#define LTQ_ES_ARP_REG_UPT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_UPT) | (((val) & 0x1) << 13)) +/* RARP Packet Treated as Cross_VLAN Packet (12) */ +#define LTQ_ES_ARP_REG_RPT (0x1 << 12) +#define LTQ_ES_ARP_REG_RPT_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_ARP_REG_RPT_GET(val) ((((val) & LTQ_ES_ARP_REG_RPT) >> 12) & 0x1) +#define LTQ_ES_ARP_REG_RPT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RPT) | (((val) & 0x1) << 12)) +/* RARP/ARP Packet Action (11:10) */ +#define LTQ_ES_ARP_REG_RAPA (0x3 << 10) +#define LTQ_ES_ARP_REG_RAPA_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_ARP_REG_RAPA_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPA) >> 10) & 0x3) +#define LTQ_ES_ARP_REG_RAPA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPA) | (((val) & 0x3) << 10)) +/* RARP/ARP Packet Priority Enable (9) */ +#define LTQ_ES_ARP_REG_RAPPE (0x1 << 9) +#define LTQ_ES_ARP_REG_RAPPE_VAL(val) (((val) & 0x1) << 9) +#define LTQ_ES_ARP_REG_RAPPE_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPPE) >> 9) & 0x1) +#define LTQ_ES_ARP_REG_RAPPE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPPE) | (((val) & 0x1) << 9)) +/* RARP/ARP Packet Priority (8:7) */ +#define LTQ_ES_ARP_REG_RAPP (0x3 << 7) +#define LTQ_ES_ARP_REG_RAPP_VAL(val) (((val) & 0x3) << 7) +#define LTQ_ES_ARP_REG_RAPP_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPP) >> 7) & 0x3) +#define LTQ_ES_ARP_REG_RAPP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPP) | (((val) & 0x3) << 7)) +/* RARP/ARP Packet Output Tag Handle (6:5) */ +#define LTQ_ES_ARP_REG_RAPOTH (0x3 << 5) +#define LTQ_ES_ARP_REG_RAPOTH_VAL(val) (((val) & 0x3) << 5) +#define LTQ_ES_ARP_REG_RAPOTH_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPOTH) >> 5) & 0x3) +#define LTQ_ES_ARP_REG_RAPOTH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPOTH) | (((val) & 0x3) << 5)) +/* ARP Packet Treated as Cross _ VLAN Packet (4) */ +#define LTQ_ES_ARP_REG_APT (0x1 << 4) +#define LTQ_ES_ARP_REG_APT_VAL(val) (((val) & 0x1) << 4) +#define LTQ_ES_ARP_REG_APT_GET(val) ((((val) & LTQ_ES_ARP_REG_APT) >> 4) & 0x1) +#define LTQ_ES_ARP_REG_APT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_APT) | (((val) & 0x1) << 4)) +/* RARP/ARP Packet Treated as Management Packet (3) */ +#define LTQ_ES_ARP_REG_RAPTM (0x1 << 3) +#define LTQ_ES_ARP_REG_RAPTM_VAL(val) (((val) & 0x1) << 3) +#define LTQ_ES_ARP_REG_RAPTM_GET(val) ((((val) & LTQ_ES_ARP_REG_RAPTM) >> 3) & 0x1) +#define LTQ_ES_ARP_REG_RAPTM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_RAPTM) | (((val) & 0x1) << 3)) +/* RARP/ARP Packet Treated as Span Packet (2) */ +#define LTQ_ES_ARP_REG_TAPTS (0x1 << 2) +#define LTQ_ES_ARP_REG_TAPTS_VAL(val) (((val) & 0x1) << 2) +#define LTQ_ES_ARP_REG_TAPTS_GET(val) ((((val) & LTQ_ES_ARP_REG_TAPTS) >> 2) & 0x1) +#define LTQ_ES_ARP_REG_TAPTS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TAPTS) | (((val) & 0x1) << 2)) +/* Trap ARP Packet (1) */ +#define LTQ_ES_ARP_REG_TAP (0x1 << 1) +#define LTQ_ES_ARP_REG_TAP_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_ARP_REG_TAP_GET(val) ((((val) & LTQ_ES_ARP_REG_TAP) >> 1) & 0x1) +#define LTQ_ES_ARP_REG_TAP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TAP) | (((val) & 0x1) << 1)) +/* Trap RARP Packet (0) */ +#define LTQ_ES_ARP_REG_TRP (0x1) +#define LTQ_ES_ARP_REG_TRP_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_ARP_REG_TRP_GET(val) ((((val) & LTQ_ES_ARP_REG_TRP) >> 0) & 0x1) +#define LTQ_ES_ARP_REG_TRP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ARP_REG_TRP) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Storm control Register + ******************************************************************************/ + +/* Reserved (31:29) */ +#define LTQ_ES_STRM_CTL_REG_RES (0x7 << 29) +#define LTQ_ES_STRM_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_RES) >> 29) & 0x7) +/* 10M Threshold (28:16) */ +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH (0x1fff << 16) +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_VAL(val) (((val) & 0x1fff) << 16) +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_10_TH) >> 16) & 0x1fff) +#define LTQ_ES_STRM_CTL_REG_STORM_10_TH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_10_TH) | (((val) & 0x1fff) << 16)) +/* Storm Enable for Broadcast Packets (15) */ +#define LTQ_ES_STRM_CTL_REG_STORM_B (0x1 << 15) +#define LTQ_ES_STRM_CTL_REG_STORM_B_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_STRM_CTL_REG_STORM_B_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_B) >> 15) & 0x1) +#define LTQ_ES_STRM_CTL_REG_STORM_B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_B) | (((val) & 0x1) << 15)) +/* Storm Enable for Multicast Packets (14) */ +#define LTQ_ES_STRM_CTL_REG_STORM_M (0x1 << 14) +#define LTQ_ES_STRM_CTL_REG_STORM_M_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_STRM_CTL_REG_STORM_M_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_M) >> 14) & 0x1) +#define LTQ_ES_STRM_CTL_REG_STORM_M_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_M) | (((val) & 0x1) << 14)) +/* Storm Enable for Un-learned Unicast Packets (13) */ +#define LTQ_ES_STRM_CTL_REG_STORM_U (0x1 << 13) +#define LTQ_ES_STRM_CTL_REG_STORM_U_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_STRM_CTL_REG_STORM_U_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_U) >> 13) & 0x1) +#define LTQ_ES_STRM_CTL_REG_STORM_U_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_U) | (((val) & 0x1) << 13)) +/* 100M Threshold (12:0) */ +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH (0x1fff) +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_VAL(val) (((val) & 0x1fff) << 0) +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_GET(val) ((((val) & LTQ_ES_STRM_CTL_REG_STORM_100_TH) >> 0) & 0x1fff) +#define LTQ_ES_STRM_CTL_REG_STORM_100_TH_SET(reg,val) (reg) = ((reg & ~LTQ_ES_STRM_CTL_REG_STORM_100_TH) | (((val) & 0x1fff) << 0)) + +/******************************************************************************* + * RGMII/GMII Port Control Register + ******************************************************************************/ + +/* Management Clock Select (31:24) */ +#define LTQ_ES_RGMII_CTL_REG_MCS (0xff << 24) +#define LTQ_ES_RGMII_CTL_REG_MCS_VAL(val) (((val) & 0xff) << 24) +#define LTQ_ES_RGMII_CTL_REG_MCS_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_MCS) >> 24) & 0xff) +#define LTQ_ES_RGMII_CTL_REG_MCS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_MCS) | (((val) & 0xff) << 24)) +/* Interface Selection (19:18) */ +#define LTQ_ES_RGMII_CTL_REG_IS (0x3 << 18) +#define LTQ_ES_RGMII_CTL_REG_IS_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_IS) >> 18) & 0x3) +/* Port 1 RGMII Rx Clock Delay (17:16) */ +#define LTQ_ES_RGMII_CTL_REG_P1RDLY (0x3 << 16) +#define LTQ_ES_RGMII_CTL_REG_P1RDLY_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_RGMII_CTL_REG_P1RDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1RDLY) >> 16) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P1RDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1RDLY) | (((val) & 0x3) << 16)) +/* Port 1 RGMII Tx Clock Delay (15:14) */ +#define LTQ_ES_RGMII_CTL_REG_P1TDLY (0x3 << 14) +#define LTQ_ES_RGMII_CTL_REG_P1TDLY_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_RGMII_CTL_REG_P1TDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1TDLY) >> 14) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P1TDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1TDLY) | (((val) & 0x3) << 14)) +/* Port 1 Speed (13:12) */ +#define LTQ_ES_RGMII_CTL_REG_P1SPD (0x3 << 12) +#define LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_RGMII_CTL_REG_P1SPD_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1SPD) >> 12) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P1SPD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1SPD) | (((val) & 0x3) << 12)) +/* Port 1 Duplex mode (11) */ +#define LTQ_ES_RGMII_CTL_REG_P1DUP (0x1 << 11) +#define LTQ_ES_RGMII_CTL_REG_P1DUP_VAL(val) (((val) & 0x1) << 11) +#define LTQ_ES_RGMII_CTL_REG_P1DUP_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1DUP) >> 11) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P1DUP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1DUP) | (((val) & 0x1) << 11)) +/* Port 1 Flow Control Enable (10) */ +#define LTQ_ES_RGMII_CTL_REG_P1FCE (0x1 << 10) +#define LTQ_ES_RGMII_CTL_REG_P1FCE_VAL(val) (((val) & 0x1) << 10) +#define LTQ_ES_RGMII_CTL_REG_P1FCE_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P1FCE) >> 10) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P1FCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P1FCE) | (((val) & 0x1) << 10)) +/* Port 0 RGMII Rx Clock Delay (7:6) */ +#define LTQ_ES_RGMII_CTL_REG_P0RDLY (0x3 << 6) +#define LTQ_ES_RGMII_CTL_REG_P0RDLY_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_RGMII_CTL_REG_P0RDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0RDLY) >> 6) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P0RDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0RDLY) | (((val) & 0x3) << 6)) +/* Port 0 RGMII Tx Clock Delay (5:4) */ +#define LTQ_ES_RGMII_CTL_REG_P0TDLY (0x3 << 4) +#define LTQ_ES_RGMII_CTL_REG_P0TDLY_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_RGMII_CTL_REG_P0TDLY_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0TDLY) >> 4) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P0TDLY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0TDLY) | (((val) & 0x3) << 4)) +/* Port 0 Speed (3:2) */ +#define LTQ_ES_RGMII_CTL_REG_P0SPD (0x3 << 2) +#define LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_RGMII_CTL_REG_P0SPD_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0SPD) >> 2) & 0x3) +#define LTQ_ES_RGMII_CTL_REG_P0SPD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0SPD) | (((val) & 0x3) << 2)) +/* Port 0 Duplex mode (1) */ +#define LTQ_ES_RGMII_CTL_REG_P0DUP (0x1 << 1) +#define LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_RGMII_CTL_REG_P0DUP_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0DUP) >> 1) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P0DUP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0DUP) | (((val) & 0x1) << 1)) +/* Port 0 Flow Control Enable (0) */ +#define LTQ_ES_RGMII_CTL_REG_P0FCE (0x1) +#define LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_RGMII_CTL_REG_P0FCE_GET(val) ((((val) & LTQ_ES_RGMII_CTL_REG_P0FCE) >> 0) & 0x1) +#define LTQ_ES_RGMII_CTL_REG_P0FCE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RGMII_CTL_REG_P0FCE) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * 802.1p Priority Map Register + ******************************************************************************/ + +/* Priority Queue 7 (15:14) */ +#define LTQ_ES_PRT_1P_REG_1PPQ7 (0x3 << 14) +#define LTQ_ES_PRT_1P_REG_1PPQ7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_PRT_1P_REG_1PPQ7_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ7) >> 14) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ7) | (((val) & 0x3) << 14)) +/* Priority Queue 6 (13:12) */ +#define LTQ_ES_PRT_1P_REG_1PPQ6 (0x3 << 12) +#define LTQ_ES_PRT_1P_REG_1PPQ6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_PRT_1P_REG_1PPQ6_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ6) >> 12) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ6) | (((val) & 0x3) << 12)) +/* Priority Queue 5 (11:10) */ +#define LTQ_ES_PRT_1P_REG_1PPQ5 (0x3 << 10) +#define LTQ_ES_PRT_1P_REG_1PPQ5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_PRT_1P_REG_1PPQ5_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ5) >> 10) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ5) | (((val) & 0x3) << 10)) +/* Priority Queue 4 (9:8) */ +#define LTQ_ES_PRT_1P_REG_1PPQ4 (0x3 << 8) +#define LTQ_ES_PRT_1P_REG_1PPQ4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_PRT_1P_REG_1PPQ4_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ4) >> 8) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ4) | (((val) & 0x3) << 8)) +/* Priority Queue 3 (7:6) */ +#define LTQ_ES_PRT_1P_REG_1PPQ3 (0x3 << 6) +#define LTQ_ES_PRT_1P_REG_1PPQ3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_PRT_1P_REG_1PPQ3_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ3) >> 6) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ3) | (((val) & 0x3) << 6)) +/* Priority Queue 2 (5:4) */ +#define LTQ_ES_PRT_1P_REG_1PPQ2 (0x3 << 4) +#define LTQ_ES_PRT_1P_REG_1PPQ2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_PRT_1P_REG_1PPQ2_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ2) >> 4) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ2) | (((val) & 0x3) << 4)) +/* Priority Queue 1 (3:2) */ +#define LTQ_ES_PRT_1P_REG_1PPQ1 (0x3 << 2) +#define LTQ_ES_PRT_1P_REG_1PPQ1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_PRT_1P_REG_1PPQ1_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ1) >> 2) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ1) | (((val) & 0x3) << 2)) +/* Priority Queue 0 (1:0) */ +#define LTQ_ES_PRT_1P_REG_1PPQ0 (0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_PRT_1P_REG_1PPQ0_GET(val) ((((val) & LTQ_ES_PRT_1P_REG_1PPQ0) >> 0) & 0x3) +#define LTQ_ES_PRT_1P_REG_1PPQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRT_1P_REG_1PPQ0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Global Bucket Size Base counter + ******************************************************************************/ + +/* Reserved (31:18) */ +#define LTQ_ES_GBKT_SZBS_REG_REV (0x3fff << 18) +#define LTQ_ES_GBKT_SZBS_REG_REV_GET(val) ((((val) & LTQ_ES_GBKT_SZBS_REG_REV) >> 18) & 0x3fff) +/* Base[17:0] (17:0) */ +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0 (0x3ffff) +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_VAL(val) (((val) & 0x3ffff) << 0) +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_GET(val) ((((val) & LTQ_ES_GBKT_SZBS_REG_BASE17_0) >> 0) & 0x3ffff) +#define LTQ_ES_GBKT_SZBS_REG_BASE17_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_GBKT_SZBS_REG_BASE17_0) | (((val) & 0x3ffff) << 0)) + +/******************************************************************************* + * Global Bucket Size Extend Base Counter + ******************************************************************************/ + +/* Reserved (31:18) */ +#define LTQ_ES_GBKT_SZEBS_REG_REV (0x3fff << 18) +#define LTQ_ES_GBKT_SZEBS_REG_REV_GET(val) ((((val) & LTQ_ES_GBKT_SZEBS_REG_REV) >> 18) & 0x3fff) +/* Extend Base[17:0] (17:0) */ +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0 (0x3ffff) +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_VAL(val) (((val) & 0x3ffff) << 0) +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_GET(val) ((((val) & LTQ_ES_GBKT_SZEBS_REG_EBASE17_0) >> 0) & 0x3ffff) +#define LTQ_ES_GBKT_SZEBS_REG_EBASE17_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_GBKT_SZEBS_REG_EBASE17_0) | (((val) & 0x3ffff) << 0)) + +/******************************************************************************* + * Buffer Threshold Register + ******************************************************************************/ + +/* Port Unfull Offset 3 (31:30) */ +#define LTQ_ES_BF_TH_REG_PUO3 (0x3 << 30) +#define LTQ_ES_BF_TH_REG_PUO3_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_BF_TH_REG_PUO3_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO3) >> 30) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO3) | (((val) & 0x3) << 30)) +/* Port Unfull Offset 2 (29:28) */ +#define LTQ_ES_BF_TH_REG_PUO2 (0x3 << 28) +#define LTQ_ES_BF_TH_REG_PUO2_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_BF_TH_REG_PUO2_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO2) >> 28) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO2) | (((val) & 0x3) << 28)) +/* Port Unfull Offset 1 (27:26) */ +#define LTQ_ES_BF_TH_REG_PUO1 (0x3 << 26) +#define LTQ_ES_BF_TH_REG_PUO1_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_BF_TH_REG_PUO1_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO1) >> 26) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO1) | (((val) & 0x3) << 26)) +/* Port Unfull Offset 0 (25:24) */ +#define LTQ_ES_BF_TH_REG_PUO0 (0x3 << 24) +#define LTQ_ES_BF_TH_REG_PUO0_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_BF_TH_REG_PUO0_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUO0) >> 24) & 0x3) +#define LTQ_ES_BF_TH_REG_PUO0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUO0) | (((val) & 0x3) << 24)) +/* Port Full Offset 3 (23:22) */ +#define LTQ_ES_BF_TH_REG_PFO3 (0x3 << 22) +#define LTQ_ES_BF_TH_REG_PFO3_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_BF_TH_REG_PFO3_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO3) >> 22) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO3) | (((val) & 0x3) << 22)) +/* Port Full Offset 2 (21:20) */ +#define LTQ_ES_BF_TH_REG_PFO2 (0x3 << 20) +#define LTQ_ES_BF_TH_REG_PFO2_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_BF_TH_REG_PFO2_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO2) >> 20) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO2) | (((val) & 0x3) << 20)) +/* Port Full Offset 1 (19:18) */ +#define LTQ_ES_BF_TH_REG_PFO1 (0x3 << 18) +#define LTQ_ES_BF_TH_REG_PFO1_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_BF_TH_REG_PFO1_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO1) >> 18) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO1) | (((val) & 0x3) << 18)) +/* Port Full Offset 0 (17:16) */ +#define LTQ_ES_BF_TH_REG_PFO0 (0x3 << 16) +#define LTQ_ES_BF_TH_REG_PFO0_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_BF_TH_REG_PFO0_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFO0) >> 16) & 0x3) +#define LTQ_ES_BF_TH_REG_PFO0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFO0) | (((val) & 0x3) << 16)) +/* Reserved (15:14) */ +#define LTQ_ES_BF_TH_REG_RES (0x3 << 14) +#define LTQ_ES_BF_TH_REG_RES_GET(val) ((((val) & LTQ_ES_BF_TH_REG_RES) >> 14) & 0x3) +/* Total Low Add (13) */ +#define LTQ_ES_BF_TH_REG_TLA (0x1 << 13) +#define LTQ_ES_BF_TH_REG_TLA_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_BF_TH_REG_TLA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_TLA) >> 13) & 0x1) +#define LTQ_ES_BF_TH_REG_TLA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_TLA) | (((val) & 0x1) << 13)) +/* Total High Add (12) */ +#define LTQ_ES_BF_TH_REG_THA (0x1 << 12) +#define LTQ_ES_BF_TH_REG_THA_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_BF_TH_REG_THA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_THA) >> 12) & 0x1) +#define LTQ_ES_BF_TH_REG_THA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_THA) | (((val) & 0x1) << 12)) +/* Total Low Offset (11:10) */ +#define LTQ_ES_BF_TH_REG_TLO (0x3 << 10) +#define LTQ_ES_BF_TH_REG_TLO_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_BF_TH_REG_TLO_GET(val) ((((val) & LTQ_ES_BF_TH_REG_TLO) >> 10) & 0x3) +#define LTQ_ES_BF_TH_REG_TLO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_TLO) | (((val) & 0x3) << 10)) +/* Total High Offset (9:8) */ +#define LTQ_ES_BF_TH_REG_THO (0x3 << 8) +#define LTQ_ES_BF_TH_REG_THO_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_BF_TH_REG_THO_GET(val) ((((val) & LTQ_ES_BF_TH_REG_THO) >> 8) & 0x3) +#define LTQ_ES_BF_TH_REG_THO_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_THO) | (((val) & 0x3) << 8)) +/* Port Unfull Add (7:4) */ +#define LTQ_ES_BF_TH_REG_PUA (0xf << 4) +#define LTQ_ES_BF_TH_REG_PUA_VAL(val) (((val) & 0xf) << 4) +#define LTQ_ES_BF_TH_REG_PUA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PUA) >> 4) & 0xf) +#define LTQ_ES_BF_TH_REG_PUA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PUA) | (((val) & 0xf) << 4)) +/* Port Full Add (3:0) */ +#define LTQ_ES_BF_TH_REG_PFA (0xf) +#define LTQ_ES_BF_TH_REG_PFA_VAL(val) (((val) & 0xf) << 0) +#define LTQ_ES_BF_TH_REG_PFA_GET(val) ((((val) & LTQ_ES_BF_TH_REG_PFA) >> 0) & 0xf) +#define LTQ_ES_BF_TH_REG_PFA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_BF_TH_REG_PFA) | (((val) & 0xf) << 0)) + +/******************************************************************************* + * PMAC Header Control Register + ******************************************************************************/ + +/* Reserved (31:22) */ +#define LTQ_ES_PMAC_HD_CTL_RES (0x3ff << 22) +#define LTQ_ES_PMAC_HD_CTL_RES_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RES) >> 22) & 0x3ff) +/* Remove Layer-2 Header from Packets Going from PMAC to DMA (21) */ +#define LTQ_ES_PMAC_HD_CTL_RL2 (0x1 << 21) +#define LTQ_ES_PMAC_HD_CTL_RL2_VAL(val) (((val) & 0x1) << 21) +#define LTQ_ES_PMAC_HD_CTL_RL2_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RL2) >> 21) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_RL2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_RL2) | (((val) & 0x1) << 21)) +/* Remove CRC from Packets Going from PMAC to DMA (20) */ +#define LTQ_ES_PMAC_HD_CTL_RC (0x1 << 20) +#define LTQ_ES_PMAC_HD_CTL_RC_VAL(val) (((val) & 0x1) << 20) +#define LTQ_ES_PMAC_HD_CTL_RC_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_RC) >> 20) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_RC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_RC) | (((val) & 0x1) << 20)) +/* Status Header for Packets from PMAC to DMA (19) */ +#define LTQ_ES_PMAC_HD_CTL_AS (0x1 << 19) +#define LTQ_ES_PMAC_HD_CTL_AS_VAL(val) (((val) & 0x1) << 19) +#define LTQ_ES_PMAC_HD_CTL_AS_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_AS) >> 19) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_AS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_AS) | (((val) & 0x1) << 19)) +/* Add CRC for packets from DMA to PMAC (18) */ +#define LTQ_ES_PMAC_HD_CTL_AC (0x1 << 18) +#define LTQ_ES_PMAC_HD_CTL_AC_VAL(val) (((val) & 0x1) << 18) +#define LTQ_ES_PMAC_HD_CTL_AC_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_AC) >> 18) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_AC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_AC) | (((val) & 0x1) << 18)) +/* Contains the length/type value to the added to packets from DMA to PMAC (17:2) */ +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN (0xffff << 2) +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_VAL(val) (((val) & 0xffff) << 2) +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_TYPE_LEN) >> 2) & 0xffff) +#define LTQ_ES_PMAC_HD_CTL_TYPE_LEN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_TYPE_LEN) | (((val) & 0xffff) << 2)) +/* Add TAG to Packets from DMA to PMAC (1) */ +#define LTQ_ES_PMAC_HD_CTL_TAG (0x1 << 1) +#define LTQ_ES_PMAC_HD_CTL_TAG_VAL(val) (((val) & 0x1) << 1) +#define LTQ_ES_PMAC_HD_CTL_TAG_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_TAG) >> 1) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_TAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_TAG) | (((val) & 0x1) << 1)) +/* ADD Header to Packets from DMA to PMAC (0) */ +#define LTQ_ES_PMAC_HD_CTL_ADD (0x1) +#define LTQ_ES_PMAC_HD_CTL_ADD_VAL(val) (((val) & 0x1) << 0) +#define LTQ_ES_PMAC_HD_CTL_ADD_GET(val) ((((val) & LTQ_ES_PMAC_HD_CTL_ADD) >> 0) & 0x1) +#define LTQ_ES_PMAC_HD_CTL_ADD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_HD_CTL_ADD) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PMAC Source Address Register 1 + ******************************************************************************/ + +/* Source Address to be inserted as a part of the Ethernet header. (15:0) */ +#define LTQ_ES_PMAC_SA1_SA_47_32 (0xffff) +#define LTQ_ES_PMAC_SA1_SA_47_32_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_PMAC_SA1_SA_47_32_GET(val) ((((val) & LTQ_ES_PMAC_SA1_SA_47_32) >> 0) & 0xffff) +#define LTQ_ES_PMAC_SA1_SA_47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_SA1_SA_47_32) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * PMAC Source Address Register 2 + ******************************************************************************/ + +/* Source Address (31:0) */ +#define LTQ_ES_PMAC_SA2_SA_31_0 (0xFFFFFFFFL) +#define LTQ_ES_PMAC_SA2_SA_31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define LTQ_ES_PMAC_SA2_SA_31_0_GET(val) ((((val) & LTQ_ES_PMAC_SA2_SA_31_0) >> 0) & 0xFFFFFFFFL) +#define LTQ_ES_PMAC_SA2_SA_31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_SA2_SA_31_0) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * PMAC Destination Address Register 1 + ******************************************************************************/ + +/* Destination Address (15:0) */ +#define LTQ_ES_PMAC_DA1_DA_47_32 (0xffff) +#define LTQ_ES_PMAC_DA1_DA_47_32_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_PMAC_DA1_DA_47_32_GET(val) ((((val) & LTQ_ES_PMAC_DA1_DA_47_32) >> 0) & 0xffff) +#define LTQ_ES_PMAC_DA1_DA_47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_DA1_DA_47_32) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * PMAC Destination Address Register 2 + ******************************************************************************/ + +/* Destination Address to be inserted as a part of the Ethernet header. (31:0) */ +#define LTQ_ES_PMAC_DA2_DA_31_0 (0xFFFFFFFFL) +#define LTQ_ES_PMAC_DA2_DA_31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define LTQ_ES_PMAC_DA2_DA_31_0_GET(val) ((((val) & LTQ_ES_PMAC_DA2_DA_31_0) >> 0) & 0xFFFFFFFFL) +#define LTQ_ES_PMAC_DA2_DA_31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_DA2_DA_31_0) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * PMAC VLAN Register + ******************************************************************************/ + +/* Priority to be inserted as a part of VLAN tag (15:13) */ +#define LTQ_ES_PMAC_VLAN_PRI (0x7 << 13) +#define LTQ_ES_PMAC_VLAN_PRI_VAL(val) (((val) & 0x7) << 13) +#define LTQ_ES_PMAC_VLAN_PRI_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_PRI) >> 13) & 0x7) +#define LTQ_ES_PMAC_VLAN_PRI_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_PRI) | (((val) & 0x7) << 13)) +/* CFI bit to be inserted as a part of VLAN tag (12) */ +#define LTQ_ES_PMAC_VLAN_CFI (0x1 << 12) +#define LTQ_ES_PMAC_VLAN_CFI_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_PMAC_VLAN_CFI_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_CFI) >> 12) & 0x1) +#define LTQ_ES_PMAC_VLAN_CFI_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_CFI) | (((val) & 0x1) << 12)) +/* VLAN ID to be inserted as a part of VLAN tag (11:0) */ +#define LTQ_ES_PMAC_VLAN_VLAN_ID (0xfff) +#define LTQ_ES_PMAC_VLAN_VLAN_ID_VAL(val) (((val) & 0xfff) << 0) +#define LTQ_ES_PMAC_VLAN_VLAN_ID_GET(val) ((((val) & LTQ_ES_PMAC_VLAN_VLAN_ID) >> 0) & 0xfff) +#define LTQ_ES_PMAC_VLAN_VLAN_ID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_VLAN_VLAN ID) | (((val) & 0xfff) << 0)) + +/******************************************************************************* + * PMAC TX IPG Counter Register + ******************************************************************************/ + +/* IPG Counter (7:0) */ +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT (0xff) +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_VAL(val) (((val) & 0xff) << 0) +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_GET(val) ((((val) & LTQ_ES_PMAC_TX_IPG_IPG_CNT) >> 0) & 0xff) +#define LTQ_ES_PMAC_TX_IPG_IPG_CNT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_TX_IPG_IPG_CNT) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * PMAC RX IPG Counter Register + ******************************************************************************/ + +/* IPG Counter (7:0) */ +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT (0xff) +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_VAL(val) (((val) & 0xff) << 0) +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_GET(val) ((((val) & LTQ_ES_PMAC_RX_IPG_IPG_CNT) >> 0) & 0xff) +#define LTQ_ES_PMAC_RX_IPG_IPG_CNT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PMAC_RX_IPG_IPG_CNT) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * Address Table Control 0 Register + ******************************************************************************/ + +/* Address [31:0] (31:0) */ +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0 (0xFFFFFFFFL) +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0) >> 0) & 0xFFFFFFFFL) +#define LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL0_REG_ADDR31_0) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * Address Table Control 1 Register + ******************************************************************************/ + +/* Port Map (22:20) */ +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP (0x7 << 20) +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(val) (((val) & 0x7) << 20) +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_PMAP) >> 20) & 0x7) +#define LTQ_ES_ADR_TB_CTL1_REG_PMAP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_PMAP) | (((val) & 0x7) << 20)) +/* FID group (17:16) */ +#define LTQ_ES_ADR_TB_CTL1_REG_FID (0x3 << 16) +#define LTQ_ES_ADR_TB_CTL1_REG_FID_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_ADR_TB_CTL1_REG_FID_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_FID) >> 16) & 0x3) +#define LTQ_ES_ADR_TB_CTL1_REG_FID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_FID) | (((val) & 0x3) << 16)) +/* Address [47:32] (15:0) */ +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32 (0xffff) +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32) >> 0) & 0xffff) +#define LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL1_REG_ADDR47_32) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * Address Table Control 2 Register + ******************************************************************************/ + +/* Command (22:20) */ +#define LTQ_ES_ADR_TB_CTL2_REG_CMD (0x7 << 20) +#define LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(val) (((val) & 0x7) << 20) +#define LTQ_ES_ADR_TB_CTL2_REG_CMD_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_CMD) >> 20) & 0x7) +#define LTQ_ES_ADR_TB_CTL2_REG_CMD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_CMD) | (((val) & 0x7) << 20)) +/* Access Control (19:16) */ +#define LTQ_ES_ADR_TB_CTL2_REG_AC (0xf << 16) +#define LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(val) (((val) & 0xf) << 16) +#define LTQ_ES_ADR_TB_CTL2_REG_AC_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_AC) >> 16) & 0xf) +#define LTQ_ES_ADR_TB_CTL2_REG_AC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_AC) | (((val) & 0xf) << 16)) +/* Info Type: Static address (12) */ +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT (0x1 << 12) +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_INFOT) >> 12) & 0x1) +#define LTQ_ES_ADR_TB_CTL2_REG_INFOT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_INFOT) | (((val) & 0x1) << 12)) +/* Info_Ctrl/Age Timer (10:0) */ +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT (0x7ff) +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_VAL(val) (((val) & 0x7ff) << 0) +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_GET(val) ((((val) & LTQ_ES_ADR_TB_CTL2_REG_ITAT) >> 0) & 0x7ff) +#define LTQ_ES_ADR_TB_CTL2_REG_ITAT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_ADR_TB_CTL2_REG_ITAT) | (((val) & 0x7ff) << 0)) + +/******************************************************************************* + * Address Table Status 0 Register + ******************************************************************************/ + +/* Address [31:0] (31:0) */ +#define LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0 (0xFFFFFFFFL) +#define LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0_GET(val) ((((val) & LTQ_ES_ADR_TB_ST0_REG_ADDRS31_0) >> 0) & 0xFFFFFFFFL) + +/******************************************************************************* + * Address Table Status 1 Register + ******************************************************************************/ + +/* Port Map (22:20) */ +#define LTQ_ES_ADR_TB_ST1_REG_PMAPS (0x7 << 20) +#define LTQ_ES_ADR_TB_ST1_REG_PMAPS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_PMAPS) >> 20) & 0x7) +/* FID group (17:16) */ +#define LTQ_ES_ADR_TB_ST1_REG_FIDS (0x3 << 16) +#define LTQ_ES_ADR_TB_ST1_REG_FIDS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_FIDS) >> 16) & 0x3) +/* Address [47:32] (15:0) */ +#define LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32 (0xffff) +#define LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32_GET(val) ((((val) & LTQ_ES_ADR_TB_ST1_REG_ADDRS47_32) >> 0) & 0xffff) + +/******************************************************************************* + * Address Table Status 2 Register + ******************************************************************************/ + +/* Busy (31) */ +#define LTQ_ES_ADR_TB_ST2_REG_BUSY (0x1 << 31) +#define LTQ_ES_ADR_TB_ST2_REG_BUSY_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_BUSY) >> 31) & 0x1) +/* Result (30:28) */ +#define LTQ_ES_ADR_TB_ST2_REG_RSLT (0x7 << 28) +#define LTQ_ES_ADR_TB_ST2_REG_RSLT_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_RSLT) >> 28) & 0x7) +/* Command (22:20) */ +#define LTQ_ES_ADR_TB_ST2_REG_CMD (0x7 << 20) +#define LTQ_ES_ADR_TB_ST2_REG_CMD_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_CMD) >> 20) & 0x7) +/* Access Control (19:16) */ +#define LTQ_ES_ADR_TB_ST2_REG_AC (0xf << 16) +#define LTQ_ES_ADR_TB_ST2_REG_AC_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_AC) >> 16) & 0xf) +/* Bad Status (14) */ +#define LTQ_ES_ADR_TB_ST2_REG_BAD (0x1 << 14) +#define LTQ_ES_ADR_TB_ST2_REG_BAD_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_BAD) >> 14) & 0x1) +/* Occupy (13) */ +#define LTQ_ES_ADR_TB_ST2_REG_OCP (0x1 << 13) +#define LTQ_ES_ADR_TB_ST2_REG_OCP_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_OCP) >> 13) & 0x1) +/* Info Type: Static address (12) */ +#define LTQ_ES_ADR_TB_ST2_REG_INFOTS (0x1 << 12) +#define LTQ_ES_ADR_TB_ST2_REG_INFOTS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_INFOTS) >> 12) & 0x1) +/* Info_Ctrl/Age Timer Status (10:0) */ +#define LTQ_ES_ADR_TB_ST2_REG_ITATS (0x7ff) +#define LTQ_ES_ADR_TB_ST2_REG_ITATS_GET(val) ((((val) & LTQ_ES_ADR_TB_ST2_REG_ITATS) >> 0) & 0x7ff) + +/******************************************************************************* + * RMON Counter Control Register + ******************************************************************************/ + +/* Reserved (31:12) */ +#define LTQ_ES_RMON_CTL_REG_RES (0xfffff << 12) +#define LTQ_ES_RMON_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_RES) >> 12) & 0xfffff) +/* Busy/Access Start (11) */ +#define LTQ_ES_RMON_CTL_REG_BAS (0x1 << 11) +#define LTQ_ES_RMON_CTL_REG_BAS_VAL(val) (((val) & 0x1) << 11) +#define LTQ_ES_RMON_CTL_REG_BAS_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_BAS) >> 11) & 0x1) +#define LTQ_ES_RMON_CTL_REG_BAS_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_BAS) | (((val) & 0x1) << 11)) +/* Command for access counter (10:9) */ +#define LTQ_ES_RMON_CTL_REG_CAC (0x3 << 9) +#define LTQ_ES_RMON_CTL_REG_CAC_VAL(val) (((val) & 0x3) << 9) +#define LTQ_ES_RMON_CTL_REG_CAC_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_CAC) >> 9) & 0x3) +#define LTQ_ES_RMON_CTL_REG_CAC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_CAC) | (((val) & 0x3) << 9)) +/* Port (8:6) */ +#define LTQ_ES_RMON_CTL_REG_PORTC (0x7 << 6) +#define LTQ_ES_RMON_CTL_REG_PORTC_VAL(val) (((val) & 0x7) << 6) +#define LTQ_ES_RMON_CTL_REG_PORTC_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_PORTC) >> 6) & 0x7) +#define LTQ_ES_RMON_CTL_REG_PORTC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_PORTC) | (((val) & 0x7) << 6)) +/* Counter Offset (5:0) */ +#define LTQ_ES_RMON_CTL_REG_OFFSET (0x3f) +#define LTQ_ES_RMON_CTL_REG_OFFSET_VAL(val) (((val) & 0x3f) << 0) +#define LTQ_ES_RMON_CTL_REG_OFFSET_GET(val) ((((val) & LTQ_ES_RMON_CTL_REG_OFFSET) >> 0) & 0x3f) +#define LTQ_ES_RMON_CTL_REG_OFFSET_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RMON_CTL_REG_OFFSET) | (((val) & 0x3f) << 0)) + +/******************************************************************************* + * RMON Counter Status Register + ******************************************************************************/ + +/* Counter [31:0] or Counter[63:32] for byte count (31:0) */ +#define LTQ_ES_RMON_ST_REG_COUNTER (0xFFFFFFFFL) +#define LTQ_ES_RMON_ST_REG_COUNTER_GET(val) ((((val) & LTQ_ES_RMON_ST_REG_COUNTER) >> 0) & 0xFFFFFFFFL) + +/******************************************************************************* + * MDIO Indirect Access Control + ******************************************************************************/ + +/* The Write Data to the MDIO register (31:16) */ +#define LTQ_ES_MDIO_CTL_REG_WD (0xffff << 16) +#define LTQ_ES_MDIO_CTL_REG_WD_VAL(val) (((val) & 0xffff) << 16) +#define LTQ_ES_MDIO_CTL_REG_WD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_WD) >> 16) & 0xffff) +#define LTQ_ES_MDIO_CTL_REG_WD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_WD) | (((val) & 0xffff) << 16)) +/* Busy state (15) */ +#define LTQ_ES_MDIO_CTL_REG_MBUSY (0x1 << 15) +#define LTQ_ES_MDIO_CTL_REG_MBUSY_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_MDIO_CTL_REG_MBUSY_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_MBUSY) >> 15) & 0x1) +#define LTQ_ES_MDIO_CTL_REG_MBUSY_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_MBUSY) | (((val) & 0x1) << 15)) +/* Reserved (14:12) */ +#define LTQ_ES_MDIO_CTL_REG_RES (0x7 << 12) +#define LTQ_ES_MDIO_CTL_REG_RES_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_RES) >> 12) & 0x7) +/* Operation Code (11:10) */ +#define LTQ_ES_MDIO_CTL_REG_OP (0x3 << 10) +#define LTQ_ES_MDIO_CTL_REG_OP_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_MDIO_CTL_REG_OP_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_OP) >> 10) & 0x3) +#define LTQ_ES_MDIO_CTL_REG_OP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_OP) | (((val) & 0x3) << 10)) +/* PHY Address (9:5) */ +#define LTQ_ES_MDIO_CTL_REG_PHYAD (0x1f << 5) +#define LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(val) (((val) & 0x1f) << 5) +#define LTQ_ES_MDIO_CTL_REG_PHYAD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_PHYAD) >> 5) & 0x1f) +#define LTQ_ES_MDIO_CTL_REG_PHYAD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_PHYAD) | (((val) & 0x1f) << 5)) +/* Register Address (4:0) */ +#define LTQ_ES_MDIO_CTL_REG_REGAD (0x1f) +#define LTQ_ES_MDIO_CTL_REG_REGAD_VAL(val) (((val) & 0x1f) << 0) +#define LTQ_ES_MDIO_CTL_REG_REGAD_GET(val) ((((val) & LTQ_ES_MDIO_CTL_REG_REGAD) >> 0) & 0x1f) +#define LTQ_ES_MDIO_CTL_REG_REGAD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_MDIO_CTL_REG_REGAD) | (((val) & 0x1f) << 0)) + +/******************************************************************************* + * MDIO Indirect Read Data + ******************************************************************************/ + +/* Reserved (31:16) */ +#define LTQ_ES_MDIO_DATA_REG_RES (0xffff << 16) +#define LTQ_ES_MDIO_DATA_REG_RES_GET(val) ((((val) & LTQ_ES_MDIO_DATA_REG_RES) >> 16) & 0xffff) +/* The Read Data (15:0) */ +#define LTQ_ES_MDIO_DATA_REG_RD (0xffff) +#define LTQ_ES_MDIO_DATA_REG_RD_GET(val) ((((val) & LTQ_ES_MDIO_DATA_REG_RD) >> 0) & 0xffff) + +/******************************************************************************* + * Type Filter Action + ******************************************************************************/ + +/* Destination Queue for Type Filter 7 (31:30) */ +#define LTQ_ES_TP_FLT_ACT_REG_QATF7 (0x3 << 30) +#define LTQ_ES_TP_FLT_ACT_REG_QATF7_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_TP_FLT_ACT_REG_QATF7_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QATF7) >> 30) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QATF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QATF7) | (((val) & 0x3) << 30)) +/* Destination Queue for Type Filter 6 (29:28) */ +#define LTQ_ES_TP_FLT_ACT_REG_QATF6 (0x3 << 28) +#define LTQ_ES_TP_FLT_ACT_REG_QATF6_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_TP_FLT_ACT_REG_QATF6_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QATF6) >> 28) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QATF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QATF6) | (((val) & 0x3) << 28)) +/* Destination Queue for Type Filter 5 (27:26) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF5 (0x3 << 26) +#define LTQ_ES_TP_FLT_ACT_REG_QTF5_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_TP_FLT_ACT_REG_QTF5_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF5) >> 26) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF5) | (((val) & 0x3) << 26)) +/* Destination Queue for Type Filter 4 (25:24) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF4 (0x3 << 24) +#define LTQ_ES_TP_FLT_ACT_REG_QTF4_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_TP_FLT_ACT_REG_QTF4_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF4) >> 24) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF4) | (((val) & 0x3) << 24)) +/* Destination Queue for Type Filter 3 (23:22) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF3 (0x3 << 22) +#define LTQ_ES_TP_FLT_ACT_REG_QTF3_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_TP_FLT_ACT_REG_QTF3_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF3) >> 22) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF3) | (((val) & 0x3) << 22)) +/* Destination Queue for Type Filter 2 (21:20) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF2 (0x3 << 20) +#define LTQ_ES_TP_FLT_ACT_REG_QTF2_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_TP_FLT_ACT_REG_QTF2_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF2) >> 20) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF2) | (((val) & 0x3) << 20)) +/* Destination Queue for Type Filter 1 (19:18) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF1 (0x3 << 18) +#define LTQ_ES_TP_FLT_ACT_REG_QTF1_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_TP_FLT_ACT_REG_QTF1_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF1) >> 18) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF1) | (((val) & 0x3) << 18)) +/* Destination Queue for Type Filter 0 (17:16) */ +#define LTQ_ES_TP_FLT_ACT_REG_QTF0 (0x3 << 16) +#define LTQ_ES_TP_FLT_ACT_REG_QTF0_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_TP_FLT_ACT_REG_QTF0_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_QTF0) >> 16) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_QTF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_QTF0) | (((val) & 0x3) << 16)) +/* Action for Type Filter 7 (15:14) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF7 (0x3 << 14) +#define LTQ_ES_TP_FLT_ACT_REG_ATF7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_TP_FLT_ACT_REG_ATF7_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF7) >> 14) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF7) | (((val) & 0x3) << 14)) +/* Action for Type Filter 6 (13:12) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF6 (0x3 << 12) +#define LTQ_ES_TP_FLT_ACT_REG_ATF6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_TP_FLT_ACT_REG_ATF6_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF6) >> 12) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF6) | (((val) & 0x3) << 12)) +/* Action for Type Filter 5 (11:10) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF5 (0x3 << 10) +#define LTQ_ES_TP_FLT_ACT_REG_ATF5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_TP_FLT_ACT_REG_ATF5_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF5) >> 10) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF5) | (((val) & 0x3) << 10)) +/* Action for Type Filter 4 (9:8) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF4 (0x3 << 8) +#define LTQ_ES_TP_FLT_ACT_REG_ATF4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_TP_FLT_ACT_REG_ATF4_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF4) >> 8) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF4) | (((val) & 0x3) << 8)) +/* Action for Type Filter 3 (7:6) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF3 (0x3 << 6) +#define LTQ_ES_TP_FLT_ACT_REG_ATF3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_TP_FLT_ACT_REG_ATF3_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF3) >> 6) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF3) | (((val) & 0x3) << 6)) +/* Action for Type Filter 2 (5:4) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF2 (0x3 << 4) +#define LTQ_ES_TP_FLT_ACT_REG_ATF2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_TP_FLT_ACT_REG_ATF2_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF2) >> 4) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF2) | (((val) & 0x3) << 4)) +/* Action for Type Filter 1 (3:2) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF1 (0x3 << 2) +#define LTQ_ES_TP_FLT_ACT_REG_ATF1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_TP_FLT_ACT_REG_ATF1_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF1) >> 2) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF1) | (((val) & 0x3) << 2)) +/* Action for Type Filter 0 (1:0) */ +#define LTQ_ES_TP_FLT_ACT_REG_ATF0 (0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_TP_FLT_ACT_REG_ATF0_GET(val) ((((val) & LTQ_ES_TP_FLT_ACT_REG_ATF0) >> 0) & 0x3) +#define LTQ_ES_TP_FLT_ACT_REG_ATF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT_ACT_REG_ATF0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Protocol Filter Action + ******************************************************************************/ + +/* Action for Protocol Filter 7 (15:14) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7 (0x3 << 14) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF7) >> 14) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF7) | (((val) & 0x3) << 14)) +/* Action for Protocol Filter 6 (13:12) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6 (0x3 << 12) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF6) >> 12) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF6) | (((val) & 0x3) << 12)) +/* Action for Protocol Filter 5 (11:10) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5 (0x3 << 10) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF5) >> 10) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF5) | (((val) & 0x3) << 10)) +/* Action for Protocol Filter 4 (9:8) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4 (0x3 << 8) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF4) >> 8) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF4) | (((val) & 0x3) << 8)) +/* Action for Protocol Filter 3 (7:6) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3 (0x3 << 6) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF3) >> 6) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF3) | (((val) & 0x3) << 6)) +/* Action for Protocol Filter 2 (5:4) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2 (0x3 << 4) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF2) >> 4) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF2) | (((val) & 0x3) << 4)) +/* Action for Protocol Filter 1 (3:2) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1 (0x3 << 2) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF1) >> 2) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF1) | (((val) & 0x3) << 2)) +/* Action for Protocol Filter 0 (1:0) */ +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0 (0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_GET(val) ((((val) & LTQ_ES_PRTCL_FLT_ACT_REG_APF0) >> 0) & 0x3) +#define LTQ_ES_PRTCL_FLT_ACT_REG_APF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_FLT_ACT_REG_APF0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * VLAN Filter 0 + ******************************************************************************/ + +/* Res (31:24) */ +#define LTQ_ES_VLAN_FLT0_REG_RES (0xff << 24) +#define LTQ_ES_VLAN_FLT0_REG_RES_VAL(val) (((val) & 0xff) << 24) +#define LTQ_ES_VLAN_FLT0_REG_RES_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_RES) >> 24) & 0xff) +#define LTQ_ES_VLAN_FLT0_REG_RES_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_RES) | (((val) & 0xff) << 24)) +/* FID (23:22) */ +#define LTQ_ES_VLAN_FLT0_REG_FID (0x3 << 22) +#define LTQ_ES_VLAN_FLT0_REG_FID_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_VLAN_FLT0_REG_FID_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_FID) >> 22) & 0x3) +#define LTQ_ES_VLAN_FLT0_REG_FID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_FID) | (((val) & 0x3) << 22)) +/* Tagged Member (21:19) */ +#define LTQ_ES_VLAN_FLT0_REG_TM (0x7 << 19) +#define LTQ_ES_VLAN_FLT0_REG_TM_VAL(val) (((val) & 0x7) << 19) +#define LTQ_ES_VLAN_FLT0_REG_TM_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_TM) >> 19) & 0x7) +#define LTQ_ES_VLAN_FLT0_REG_TM_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_TM) | (((val) & 0x7) << 19)) +/* Member (18:16) */ +#define LTQ_ES_VLAN_FLT0_REG_M (0x7 << 16) +#define LTQ_ES_VLAN_FLT0_REG_M_VAL(val) (((val) & 0x7) << 16) +#define LTQ_ES_VLAN_FLT0_REG_M_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_M) >> 16) & 0x7) +#define LTQ_ES_VLAN_FLT0_REG_M_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_M) | (((val) & 0x7) << 16)) +/* VLAN_Valid (15) */ +#define LTQ_ES_VLAN_FLT0_REG_VV (0x1 << 15) +#define LTQ_ES_VLAN_FLT0_REG_VV_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_VLAN_FLT0_REG_VV_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VV) >> 15) & 0x1) +#define LTQ_ES_VLAN_FLT0_REG_VV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VV) | (((val) & 0x1) << 15)) +/* VLAN PRI (14:12) */ +#define LTQ_ES_VLAN_FLT0_REG_VP (0x7 << 12) +#define LTQ_ES_VLAN_FLT0_REG_VP_VAL(val) (((val) & 0x7) << 12) +#define LTQ_ES_VLAN_FLT0_REG_VP_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VP) >> 12) & 0x7) +#define LTQ_ES_VLAN_FLT0_REG_VP_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VP) | (((val) & 0x7) << 12)) +/* VID (11:0) */ +#define LTQ_ES_VLAN_FLT0_REG_VID (0xfff) +#define LTQ_ES_VLAN_FLT0_REG_VID_VAL(val) (((val) & 0xfff) << 0) +#define LTQ_ES_VLAN_FLT0_REG_VID_GET(val) ((((val) & LTQ_ES_VLAN_FLT0_REG_VID) >> 0) & 0xfff) +#define LTQ_ES_VLAN_FLT0_REG_VID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_VLAN_FLT0_REG_VID) | (((val) & 0xfff) << 0)) + +/******************************************************************************* + * Type Filter 10 + ******************************************************************************/ + +/* Value 1 Compared with Ether-Type (31:16) */ +#define LTQ_ES_TP_FLT10_REG_VCET1 (0xffff << 16) +#define LTQ_ES_TP_FLT10_REG_VCET1_VAL(val) (((val) & 0xffff) << 16) +#define LTQ_ES_TP_FLT10_REG_VCET1_GET(val) ((((val) & LTQ_ES_TP_FLT10_REG_VCET1) >> 16) & 0xffff) +#define LTQ_ES_TP_FLT10_REG_VCET1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT10_REG_VCET1) | (((val) & 0xffff) << 16)) +/* Value 0 Compared with Ether-Type (15:0) */ +#define LTQ_ES_TP_FLT10_REG_VCET0 (0xffff) +#define LTQ_ES_TP_FLT10_REG_VCET0_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_TP_FLT10_REG_VCET0_GET(val) ((((val) & LTQ_ES_TP_FLT10_REG_VCET0) >> 0) & 0xffff) +#define LTQ_ES_TP_FLT10_REG_VCET0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TP_FLT10_REG_VCET0) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * DiffServMapping 0 + ******************************************************************************/ + +/* Priority Queue F (31:30) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQF (0x3 << 30) +#define LTQ_ES_DFSRV_MAP0_REG_PQF_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP0_REG_PQF_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQF) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQF_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQF) | (((val) & 0x3) << 30)) +/* Priority Queue E (29:28) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQE (0x3 << 28) +#define LTQ_ES_DFSRV_MAP0_REG_PQE_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP0_REG_PQE_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQE) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQE_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQE) | (((val) & 0x3) << 28)) +/* Priority Queue D (27:26) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQD (0x3 << 26) +#define LTQ_ES_DFSRV_MAP0_REG_PQD_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP0_REG_PQD_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQD) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQD_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQD) | (((val) & 0x3) << 26)) +/* Priority Queue C (25:24) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQC (0x3 << 24) +#define LTQ_ES_DFSRV_MAP0_REG_PQC_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP0_REG_PQC_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQC) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQC_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQC) | (((val) & 0x3) << 24)) +/* Priority Queue B (23:22) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQB (0x3 << 22) +#define LTQ_ES_DFSRV_MAP0_REG_PQB_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP0_REG_PQB_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQB) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQB_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQB) | (((val) & 0x3) << 22)) +/* Priority Queue A (21:20) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQA (0x3 << 20) +#define LTQ_ES_DFSRV_MAP0_REG_PQA_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP0_REG_PQA_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQA) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQA_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQA) | (((val) & 0x3) << 20)) +/* Priority Queue 9 (19:18) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ9 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP0_REG_PQ9_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP0_REG_PQ9_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ9) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ9_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ9) | (((val) & 0x3) << 18)) +/* Priority Queue 8 (17:16) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ8 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP0_REG_PQ8_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP0_REG_PQ8_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ8) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ8_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ8) | (((val) & 0x3) << 16)) +/* Priority Queue 7 (15:14) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ7 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP0_REG_PQ7_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP0_REG_PQ7_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ7) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ7_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ7) | (((val) & 0x3) << 14)) +/* Priority Queue 6 (13:12) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ6 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP0_REG_PQ6_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP0_REG_PQ6_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ6) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ6_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ6) | (((val) & 0x3) << 12)) +/* Priority Queue 5 (11:10) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ5 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP0_REG_PQ5_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP0_REG_PQ5_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ5) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ5_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ5) | (((val) & 0x3) << 10)) +/* Priority Queue 4 (9:8) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ4 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP0_REG_PQ4_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP0_REG_PQ4_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ4) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ4_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ4) | (((val) & 0x3) << 8)) +/* Priority Queue 3 (7:6) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ3 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP0_REG_PQ3_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP0_REG_PQ3_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ3) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ3) | (((val) & 0x3) << 6)) +/* Priority Queue 2 (5:4) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ2 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP0_REG_PQ2_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP0_REG_PQ2_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ2) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ2) | (((val) & 0x3) << 4)) +/* Priority Queue 1 (3:2) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ1 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP0_REG_PQ1_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP0_REG_PQ1_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ1) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ1) | (((val) & 0x3) << 2)) +/* Priority Queue 0 (1:0) */ +#define LTQ_ES_DFSRV_MAP0_REG_PQ0 (0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ0_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP0_REG_PQ0_GET(val) ((((val) & LTQ_ES_DFSRV_MAP0_REG_PQ0) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP0_REG_PQ0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP0_REG_PQ0) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * DiffServMapping 1 + ******************************************************************************/ + +/* Priority Queue 1F (31:30) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F (0x3 << 30) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1F) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1F) | (((val) & 0x3) << 30)) +/* Priority Queue 1E (29:28) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E (0x3 << 28) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1E) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1E) | (((val) & 0x3) << 28)) +/* Priority Queue 1D (27:26) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D (0x3 << 26) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1D) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1D) | (((val) & 0x3) << 26)) +/* Priority Queue 1C (25:24) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C (0x3 << 24) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1C) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1C) | (((val) & 0x3) << 24)) +/* Priority Queue 1B (23:22) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B (0x3 << 22) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1B) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1B) | (((val) & 0x3) << 22)) +/* Priority Queue 1A (21:20) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A (0x3 << 20) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ1A) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ1A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ1A) | (((val) & 0x3) << 20)) +/* Priority Queue 19 (19:18) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ19 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP1_REG_PQ19_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP1_REG_PQ19_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ19) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ19_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ19) | (((val) & 0x3) << 18)) +/* Priority Queue 18 (17:16) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ18 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP1_REG_PQ18_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP1_REG_PQ18_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ18) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ18_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ18) | (((val) & 0x3) << 16)) +/* Priority Queue 17 (15:14) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ17 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP1_REG_PQ17_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP1_REG_PQ17_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ17) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ17_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ17) | (((val) & 0x3) << 14)) +/* Priority Queue 16 (13:12) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ16 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP1_REG_PQ16_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP1_REG_PQ16_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ16) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ16_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ16) | (((val) & 0x3) << 12)) +/* Priority Queue 15 (11:10) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ15 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP1_REG_PQ15_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP1_REG_PQ15_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ15) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ15_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ15) | (((val) & 0x3) << 10)) +/* Priority Queue 14 (9:8) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ14 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP1_REG_PQ14_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP1_REG_PQ14_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ14) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ14_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ14) | (((val) & 0x3) << 8)) +/* Priority Queue 13 (7:6) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ13 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP1_REG_PQ13_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP1_REG_PQ13_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ13) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ13_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ13) | (((val) & 0x3) << 6)) +/* Priority Queue 12 (5:4) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ12 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP1_REG_PQ12_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP1_REG_PQ12_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ12) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ12_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ12) | (((val) & 0x3) << 4)) +/* Priority Queue 11 (3:2) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ11 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP1_REG_PQ11_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP1_REG_PQ11_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ11) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ11_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ11) | (((val) & 0x3) << 2)) +/* Priority Queue 10 (1:0) */ +#define LTQ_ES_DFSRV_MAP1_REG_PQ10 (0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ10_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP1_REG_PQ10_GET(val) ((((val) & LTQ_ES_DFSRV_MAP1_REG_PQ10) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP1_REG_PQ10_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP1_REG_PQ10) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * DiffServMapping 2 + ******************************************************************************/ + +/* Priority Queue 2F (31:30) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F (0x3 << 30) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2F) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2F) | (((val) & 0x3) << 30)) +/* Priority Queue 2E (29:28) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E (0x3 << 28) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2E) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2E) | (((val) & 0x3) << 28)) +/* Priority Queue 2D (27:26) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D (0x3 << 26) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2D) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2D) | (((val) & 0x3) << 26)) +/* Priority Queue 2C (25:24) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C (0x3 << 24) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2C) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2C) | (((val) & 0x3) << 24)) +/* Priority Queue 2B (23:22) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B (0x3 << 22) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2B) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2B) | (((val) & 0x3) << 22)) +/* Priority Queue 2A (21:20) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A (0x3 << 20) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ2A) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ2A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ2A) | (((val) & 0x3) << 20)) +/* Priority Queue 29 (19:18) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ29 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP2_REG_PQ29_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP2_REG_PQ29_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ29) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ29_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ29) | (((val) & 0x3) << 18)) +/* Priority Queue 28 (17:16) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ28 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP2_REG_PQ28_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP2_REG_PQ28_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ28) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ28_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ28) | (((val) & 0x3) << 16)) +/* Priority Queue 27 (15:14) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ27 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP2_REG_PQ27_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP2_REG_PQ27_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ27) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ27_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ27) | (((val) & 0x3) << 14)) +/* Priority Queue 26 (13:12) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ26 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP2_REG_PQ26_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP2_REG_PQ26_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ26) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ26_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ26) | (((val) & 0x3) << 12)) +/* Priority Queue 25 (11:10) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ25 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP2_REG_PQ25_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP2_REG_PQ25_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ25) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ25_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ25) | (((val) & 0x3) << 10)) +/* Priority Queue 24 (9:8) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ24 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP2_REG_PQ24_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP2_REG_PQ24_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ24) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ24_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ24) | (((val) & 0x3) << 8)) +/* Priority Queue 23 (7:6) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ23 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP2_REG_PQ23_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP2_REG_PQ23_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ23) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ23_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ23) | (((val) & 0x3) << 6)) +/* Priority Queue 22 (5:4) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ22 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP2_REG_PQ22_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP2_REG_PQ22_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ22) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ22_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ22) | (((val) & 0x3) << 4)) +/* Priority Queue 21 (3:2) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ21 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP2_REG_PQ21_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP2_REG_PQ21_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ21) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ21_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ21) | (((val) & 0x3) << 2)) +/* Priority Queue 20 (1:0) */ +#define LTQ_ES_DFSRV_MAP2_REG_PQ20 (0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ20_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP2_REG_PQ20_GET(val) ((((val) & LTQ_ES_DFSRV_MAP2_REG_PQ20) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP2_REG_PQ20_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP2_REG_PQ20) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * DiffServMapping 3 + ******************************************************************************/ + +/* Priority Queue 3F (31:30) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F (0x3 << 30) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_VAL(val) (((val) & 0x3) << 30) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3F) >> 30) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3F_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3F) | (((val) & 0x3) << 30)) +/* Priority Queue 3E (29:28) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E (0x3 << 28) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3E) >> 28) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3E_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3E) | (((val) & 0x3) << 28)) +/* Priority Queue 3D (27:26) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D (0x3 << 26) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3D) >> 26) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3D_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3D) | (((val) & 0x3) << 26)) +/* Priority Queue 3C (25:24) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C (0x3 << 24) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3C) >> 24) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3C_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3C) | (((val) & 0x3) << 24)) +/* Priority Queue 3B (23:22) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B (0x3 << 22) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_VAL(val) (((val) & 0x3) << 22) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3B) >> 22) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3B_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3B) | (((val) & 0x3) << 22)) +/* Priority Queue 3A (21:20) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A (0x3 << 20) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_VAL(val) (((val) & 0x3) << 20) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ3A) >> 20) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ3A_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ3A) | (((val) & 0x3) << 20)) +/* Priority Queue 39 (19:18) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ39 (0x3 << 18) +#define LTQ_ES_DFSRV_MAP3_REG_PQ39_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_DFSRV_MAP3_REG_PQ39_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ39) >> 18) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ39_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ39) | (((val) & 0x3) << 18)) +/* Priority Queue 38 (17:16) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ38 (0x3 << 16) +#define LTQ_ES_DFSRV_MAP3_REG_PQ38_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_DFSRV_MAP3_REG_PQ38_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ38) >> 16) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ38_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ38) | (((val) & 0x3) << 16)) +/* Priority Queue 37 (15:14) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ37 (0x3 << 14) +#define LTQ_ES_DFSRV_MAP3_REG_PQ37_VAL(val) (((val) & 0x3) << 14) +#define LTQ_ES_DFSRV_MAP3_REG_PQ37_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ37) >> 14) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ37_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ37) | (((val) & 0x3) << 14)) +/* Priority Queue 36 (13:12) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ36 (0x3 << 12) +#define LTQ_ES_DFSRV_MAP3_REG_PQ36_VAL(val) (((val) & 0x3) << 12) +#define LTQ_ES_DFSRV_MAP3_REG_PQ36_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ36) >> 12) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ36_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ36) | (((val) & 0x3) << 12)) +/* Priority Queue 35 (11:10) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ35 (0x3 << 10) +#define LTQ_ES_DFSRV_MAP3_REG_PQ35_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_DFSRV_MAP3_REG_PQ35_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ35) >> 10) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ35_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ35) | (((val) & 0x3) << 10)) +/* Priority Queue 34 (9:8) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ34 (0x3 << 8) +#define LTQ_ES_DFSRV_MAP3_REG_PQ34_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_DFSRV_MAP3_REG_PQ34_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ34) >> 8) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ34_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ34) | (((val) & 0x3) << 8)) +/* Priority Queue 33 (7:6) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ33 (0x3 << 6) +#define LTQ_ES_DFSRV_MAP3_REG_PQ33_VAL(val) (((val) & 0x3) << 6) +#define LTQ_ES_DFSRV_MAP3_REG_PQ33_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ33) >> 6) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ33_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ33) | (((val) & 0x3) << 6)) +/* Priority Queue 32 (5:4) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ32 (0x3 << 4) +#define LTQ_ES_DFSRV_MAP3_REG_PQ32_VAL(val) (((val) & 0x3) << 4) +#define LTQ_ES_DFSRV_MAP3_REG_PQ32_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ32) >> 4) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ32_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ32) | (((val) & 0x3) << 4)) +/* Priority Queue 31 (3:2) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ31 (0x3 << 2) +#define LTQ_ES_DFSRV_MAP3_REG_PQ31_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_DFSRV_MAP3_REG_PQ31_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ31) >> 2) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ31_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ31) | (((val) & 0x3) << 2)) +/* Priority Queue 30 (1:0) */ +#define LTQ_ES_DFSRV_MAP3_REG_PQ30 (0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ30_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_DFSRV_MAP3_REG_PQ30_GET(val) ((((val) & LTQ_ES_DFSRV_MAP3_REG_PQ30) >> 0) & 0x3) +#define LTQ_ES_DFSRV_MAP3_REG_PQ30_SET(reg,val) (reg) = ((reg & ~LTQ_ES_DFSRV_MAP3_REG_PQ30) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * TCP/UDP Port Filter 0 + ******************************************************************************/ + +/* Reserved (31:30) */ +#define LTQ_ES_TCP_PF0_REG_RES (0x3 << 30) +#define LTQ_ES_TCP_PF0_REG_RES_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_RES) >> 30) & 0x3) +/* Action for TCP/UDP Port Filter 0 (29:28) */ +#define LTQ_ES_TCP_PF0_REG_ATUF0 (0x3 << 28) +#define LTQ_ES_TCP_PF0_REG_ATUF0_VAL(val) (((val) & 0x3) << 28) +#define LTQ_ES_TCP_PF0_REG_ATUF0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_ATUF0) >> 28) & 0x3) +#define LTQ_ES_TCP_PF0_REG_ATUF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_ATUF0) | (((val) & 0x3) << 28)) +/* TCP/UDP PRI for TCP/UDP Port Filter 0 (27:26) */ +#define LTQ_ES_TCP_PF0_REG_TUPF0 (0x3 << 26) +#define LTQ_ES_TCP_PF0_REG_TUPF0_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_TCP_PF0_REG_TUPF0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_TUPF0) >> 26) & 0x3) +#define LTQ_ES_TCP_PF0_REG_TUPF0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_TUPF0) | (((val) & 0x3) << 26)) +/* Compare TCP/UDP Source Port or Destination Port (25:24) */ +#define LTQ_ES_TCP_PF0_REG_COMP0 (0x3 << 24) +#define LTQ_ES_TCP_PF0_REG_COMP0_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_TCP_PF0_REG_COMP0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_COMP0) >> 24) & 0x3) +#define LTQ_ES_TCP_PF0_REG_COMP0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_COMP0) | (((val) & 0x3) << 24)) +/* Port Range in TCP/UDP (23:16) */ +#define LTQ_ES_TCP_PF0_REG_PRANGE0 (0xff << 16) +#define LTQ_ES_TCP_PF0_REG_PRANGE0_VAL(val) (((val) & 0xff) << 16) +#define LTQ_ES_TCP_PF0_REG_PRANGE0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_PRANGE0) >> 16) & 0xff) +#define LTQ_ES_TCP_PF0_REG_PRANGE0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_PRANGE0) | (((val) & 0xff) << 16)) +/* Base Port number 0 (15:0) */ +#define LTQ_ES_TCP_PF0_REG_BASEPT0 (0xffff) +#define LTQ_ES_TCP_PF0_REG_BASEPT0_VAL(val) (((val) & 0xffff) << 0) +#define LTQ_ES_TCP_PF0_REG_BASEPT0_GET(val) ((((val) & LTQ_ES_TCP_PF0_REG_BASEPT0) >> 0) & 0xffff) +#define LTQ_ES_TCP_PF0_REG_BASEPT0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_TCP_PF0_REG_BASEPT0) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * Reserved DA(0180C2000003~0180C2000000) control register + ******************************************************************************/ + +/* Valid bit for 0180C2000003 (31) */ +#define LTQ_ES_RA_03_00_REG_RA03_VALID (0x1 << 31) +#define LTQ_ES_RA_03_00_REG_RA03_VALID_VAL(val) (((val) & 0x1) << 31) +#define LTQ_ES_RA_03_00_REG_RA03_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_VALID) >> 31) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_VALID) | (((val) & 0x1) << 31)) +/* Span bit for 0180C2000003 (30) */ +#define LTQ_ES_RA_03_00_REG_RA03_SPAN (0x1 << 30) +#define LTQ_ES_RA_03_00_REG_RA03_SPAN_VAL(val) (((val) & 0x1) << 30) +#define LTQ_ES_RA_03_00_REG_RA03_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_SPAN) >> 30) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_SPAN) | (((val) & 0x1) << 30)) +/* Management bit for 0180C2000003 (29) */ +#define LTQ_ES_RA_03_00_REG_RA03_MG (0x1 << 29) +#define LTQ_ES_RA_03_00_REG_RA03_MG_VAL(val) (((val) & 0x1) << 29) +#define LTQ_ES_RA_03_00_REG_RA03_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_MG) >> 29) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_MG) | (((val) & 0x1) << 29)) +/* Cross_VLAN bit for 0180C2000003 (28) */ +#define LTQ_ES_RA_03_00_REG_RA03_CV (0x1 << 28) +#define LTQ_ES_RA_03_00_REG_RA03_CV_VAL(val) (((val) & 0x1) << 28) +#define LTQ_ES_RA_03_00_REG_RA03_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_CV) >> 28) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA03_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_CV) | (((val) & 0x1) << 28)) +/* TXTAG bit for 0180C2000003 (27:26) */ +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG (0x3 << 26) +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_VAL(val) (((val) & 0x3) << 26) +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_TXTAG) >> 26) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA03_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_TXTAG) | (((val) & 0x3) << 26)) +/* Action bit for 0180C2000003 (25:24) */ +#define LTQ_ES_RA_03_00_REG_RA03_ACT (0x3 << 24) +#define LTQ_ES_RA_03_00_REG_RA03_ACT_VAL(val) (((val) & 0x3) << 24) +#define LTQ_ES_RA_03_00_REG_RA03_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA03_ACT) >> 24) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA03_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA03_ACT) | (((val) & 0x3) << 24)) +/* Valid bit for 0180C2000002 (23) */ +#define LTQ_ES_RA_03_00_REG_RA02_VALID (0x1 << 23) +#define LTQ_ES_RA_03_00_REG_RA02_VALID_VAL(val) (((val) & 0x1) << 23) +#define LTQ_ES_RA_03_00_REG_RA02_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_VALID) >> 23) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_VALID) | (((val) & 0x1) << 23)) +/* Span bit for 0180C2000002 (22) */ +#define LTQ_ES_RA_03_00_REG_RA02_SPAN (0x1 << 22) +#define LTQ_ES_RA_03_00_REG_RA02_SPAN_VAL(val) (((val) & 0x1) << 22) +#define LTQ_ES_RA_03_00_REG_RA02_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_SPAN) >> 22) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_SPAN) | (((val) & 0x1) << 22)) +/* Management bit for 0180C2000002 (21) */ +#define LTQ_ES_RA_03_00_REG_RA02_MG (0x1 << 21) +#define LTQ_ES_RA_03_00_REG_RA02_MG_VAL(val) (((val) & 0x1) << 21) +#define LTQ_ES_RA_03_00_REG_RA02_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_MG) >> 21) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_MG) | (((val) & 0x1) << 21)) +/* Cross_VLAN bit for 0180C2000002 (20) */ +#define LTQ_ES_RA_03_00_REG_RA02_CV (0x1 << 20) +#define LTQ_ES_RA_03_00_REG_RA02_CV_VAL(val) (((val) & 0x1) << 20) +#define LTQ_ES_RA_03_00_REG_RA02_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_CV) >> 20) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA02_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_CV) | (((val) & 0x1) << 20)) +/* TXTAG bit for 0180C2000002 (19:18) */ +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG (0x3 << 18) +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_VAL(val) (((val) & 0x3) << 18) +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_TXTAG) >> 18) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA02_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_TXTAG) | (((val) & 0x3) << 18)) +/* Action bit for 0180C2000002 (17:16) */ +#define LTQ_ES_RA_03_00_REG_RA02_ACT (0x3 << 16) +#define LTQ_ES_RA_03_00_REG_RA02_ACT_VAL(val) (((val) & 0x3) << 16) +#define LTQ_ES_RA_03_00_REG_RA02_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA02_ACT) >> 16) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA02_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA02_ACT) | (((val) & 0x3) << 16)) +/* Valid bit for 0180C2000001 (15) */ +#define LTQ_ES_RA_03_00_REG_RA01_VALID (0x1 << 15) +#define LTQ_ES_RA_03_00_REG_RA01_VALID_VAL(val) (((val) & 0x1) << 15) +#define LTQ_ES_RA_03_00_REG_RA01_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_VALID) >> 15) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_VALID) | (((val) & 0x1) << 15)) +/* Span bit for 0180C2000001 (14) */ +#define LTQ_ES_RA_03_00_REG_RA01_SPAN (0x1 << 14) +#define LTQ_ES_RA_03_00_REG_RA01_SPAN_VAL(val) (((val) & 0x1) << 14) +#define LTQ_ES_RA_03_00_REG_RA01_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_SPAN) >> 14) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_SPAN) | (((val) & 0x1) << 14)) +/* Management bit for 0180C2000001 (13) */ +#define LTQ_ES_RA_03_00_REG_RA01_MG (0x1 << 13) +#define LTQ_ES_RA_03_00_REG_RA01_MG_VAL(val) (((val) & 0x1) << 13) +#define LTQ_ES_RA_03_00_REG_RA01_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_MG) >> 13) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_MG) | (((val) & 0x1) << 13)) +/* Cross_VLAN bit for 0180C2000001 (12) */ +#define LTQ_ES_RA_03_00_REG_RA01_CV (0x1 << 12) +#define LTQ_ES_RA_03_00_REG_RA01_CV_VAL(val) (((val) & 0x1) << 12) +#define LTQ_ES_RA_03_00_REG_RA01_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_CV) >> 12) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA01_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_CV) | (((val) & 0x1) << 12)) +/* TXTAG bit for 0180C2000001 (11:10) */ +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG (0x3 << 10) +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_VAL(val) (((val) & 0x3) << 10) +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_TXTAG) >> 10) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA01_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_TXTAG) | (((val) & 0x3) << 10)) +/* Action bit for 0180C2000001 (9:8) */ +#define LTQ_ES_RA_03_00_REG_RA01_ACT (0x3 << 8) +#define LTQ_ES_RA_03_00_REG_RA01_ACT_VAL(val) (((val) & 0x3) << 8) +#define LTQ_ES_RA_03_00_REG_RA01_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA01_ACT) >> 8) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA01_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA01_ACT) | (((val) & 0x3) << 8)) +/* Valid bit for 0180C2000000 (7) */ +#define LTQ_ES_RA_03_00_REG_RA00_VALID (0x1 << 7) +#define LTQ_ES_RA_03_00_REG_RA00_VALID_VAL(val) (((val) & 0x1) << 7) +#define LTQ_ES_RA_03_00_REG_RA00_VALID_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_VALID) >> 7) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_VALID_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_VALID) | (((val) & 0x1) << 7)) +/* Span bit for 0180C2000000 (6) */ +#define LTQ_ES_RA_03_00_REG_RA00_SPAN (0x1 << 6) +#define LTQ_ES_RA_03_00_REG_RA00_SPAN_VAL(val) (((val) & 0x1) << 6) +#define LTQ_ES_RA_03_00_REG_RA00_SPAN_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_SPAN) >> 6) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_SPAN_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_SPAN) | (((val) & 0x1) << 6)) +/* Management bit for 0180C2000000 (5) */ +#define LTQ_ES_RA_03_00_REG_RA00_MG (0x1 << 5) +#define LTQ_ES_RA_03_00_REG_RA00_MG_VAL(val) (((val) & 0x1) << 5) +#define LTQ_ES_RA_03_00_REG_RA00_MG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_MG) >> 5) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_MG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_MG) | (((val) & 0x1) << 5)) +/* Cross_VLAN bit for 0180C2000000 (4) */ +#define LTQ_ES_RA_03_00_REG_RA00_CV (0x1 << 4) +#define LTQ_ES_RA_03_00_REG_RA00_CV_VAL(val) (((val) & 0x1) << 4) +#define LTQ_ES_RA_03_00_REG_RA00_CV_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_CV) >> 4) & 0x1) +#define LTQ_ES_RA_03_00_REG_RA00_CV_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_CV) | (((val) & 0x1) << 4)) +/* TXTAG bit for 0180C2000000 (3:2) */ +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG (0x3 << 2) +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_VAL(val) (((val) & 0x3) << 2) +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_TXTAG) >> 2) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA00_TXTAG_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_TXTAG) | (((val) & 0x3) << 2)) +/* Action bit for 0180C2000000 (1:0) */ +#define LTQ_ES_RA_03_00_REG_RA00_ACT (0x3) +#define LTQ_ES_RA_03_00_REG_RA00_ACT_VAL(val) (((val) & 0x3) << 0) +#define LTQ_ES_RA_03_00_REG_RA00_ACT_GET(val) ((((val) & LTQ_ES_RA_03_00_REG_RA00_ACT) >> 0) & 0x3) +#define LTQ_ES_RA_03_00_REG_RA00_ACT_SET(reg,val) (reg) = ((reg & ~LTQ_ES_RA_03_00_REG_RA00_ACT) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * Protocol Filter 0 + ******************************************************************************/ + +/* Value Compared with Protocol in IP Header (31:24) */ +#define LTQ_ES_PRTCL_F0_REG_PFR3 (0xff << 24) +#define LTQ_ES_PRTCL_F0_REG_PFR3_VAL(val) (((val) & 0xff) << 24) +#define LTQ_ES_PRTCL_F0_REG_PFR3_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR3) >> 24) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR3_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR3) | (((val) & 0xff) << 24)) +/* Value Compared with Protocol in IP Header (23:16) */ +#define LTQ_ES_PRTCL_F0_REG_PFR2 (0xff << 16) +#define LTQ_ES_PRTCL_F0_REG_PFR2_VAL(val) (((val) & 0xff) << 16) +#define LTQ_ES_PRTCL_F0_REG_PFR2_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR2) >> 16) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR2_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR2) | (((val) & 0xff) << 16)) +/* Value Compared with Protocol in IP Header (15:8) */ +#define LTQ_ES_PRTCL_F0_REG_PFR1 (0xff << 8) +#define LTQ_ES_PRTCL_F0_REG_PFR1_VAL(val) (((val) & 0xff) << 8) +#define LTQ_ES_PRTCL_F0_REG_PFR1_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR1) >> 8) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR1_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR1) | (((val) & 0xff) << 8)) +/* Value Compared with Protocol in IP Header (7:0) */ +#define LTQ_ES_PRTCL_F0_REG_PFR0 (0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR0_VAL(val) (((val) & 0xff) << 0) +#define LTQ_ES_PRTCL_F0_REG_PFR0_GET(val) ((((val) & LTQ_ES_PRTCL_F0_REG_PFR0) >> 0) & 0xff) +#define LTQ_ES_PRTCL_F0_REG_PFR0_SET(reg,val) (reg) = ((reg & ~LTQ_ES_PRTCL_F0_REG_PFR0) | (((val) & 0xff) << 0)) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/irq.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/irq.h new file mode 100644 index 0000000000..06dc173544 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/irq.h @@ -0,0 +1,36 @@ +/* + * arch/mips/include/asm/mach-lantiq/svip/irq.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2010 Lantiq + * + */ + +#ifndef __IRQ_H +#define __IRQ_H + +#include <svip_irq.h> + +#define NR_IRQS 264 + +#include_next <irq.h> + +/* Functions for EXINT handling */ +extern int ifx_enable_external_int(u32 exint, u32 mode); +extern int ifx_disable_external_int(u32 exint); +extern int ifx_external_int_level(u32 exint); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h new file mode 100644 index 0000000000..697d672f36 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/lantiq_soc.h @@ -0,0 +1,71 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_SVIP_H__ +#define _LTQ_SVIP_H__ + +#ifdef CONFIG_SOC_SVIP + +#include <lantiq.h> + +/* Chip IDs */ +#define SOC_ID_SVIP 0x169 + +/* SoC Types */ +#define SOC_TYPE_SVIP 0x01 + +/* ASC0/1 - serial port */ +#define LTQ_ASC0_BASE_ADDR 0x14100100 +#define LTQ_ASC1_BASE_ADDR 0x14100200 +#define LTQ_ASC_SIZE 0x100 +#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR) + +#define LTQ_ASC_TIR(x) (INT_NUM_IM0_IRL0 + (x * 8)) +#define LTQ_ASC_RIR(x) (INT_NUM_IM0_IRL0 + (x * 8) + 2) +#define LTQ_ASC_EIR(x) (INT_NUM_IM0_IRL0 + (x * 8) + 3) + +/* ICU - interrupt control unit */ +#define LTQ_ICU_BASE_ADDR 0x14106000 +#define LTQ_ICU_BASE_ADDR1 0x14106028 +#define LTQ_ICU_BASE_ADDR2 0x1E016000 +#define LTQ_ICU_BASE_ADDR3 0x1E016028 +#define LTQ_ICU_BASE_ADDR4 0x14106050 +#define LTQ_ICU_BASE_ADDR5 0x14106078 +#define LTQ_ICU_SIZE 0x100 + +/* WDT */ +#define LTQ_WDT_BASE_ADDR 0x1F8803F0 +#define LTQ_WDT_SIZE 0x10 + +/* Status */ +#define LTQ_STATUS_BASE_ADDR (KSEG1 + 0x1E000500) +#define LTQ_STATUS_CHIPID ((u32 *)(LTQ_STATUS_BASE_ADDR + 0x000C)) + +#define LTQ_EIU_BASE_ADDR 0 + +#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) +#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) + +extern __iomem void *ltq_ebu_membase; + +extern void ltq_gpio_configure(int port, int pin, bool dirin, bool puen, + bool altsel0, bool altsel1); +extern int ltq_port_get_dir(unsigned int port, unsigned int pin); +extern int ltq_port_get_puden(unsigned int port, unsigned int pin); +extern int ltq_port_get_altsel0(unsigned int port, unsigned int pin); +extern int ltq_port_get_altsel1(unsigned int port, unsigned int pin); + +#define ltq_is_ar9() 0 +#define ltq_is_vr9() 0 +#define ltq_is_falcon() 0 + +#define BS_FLASH 0 +#define LTQ_RST_CAUSE_WDTRST 0x2 + +#endif /* CONFIG_SOC_SVIP */ +#endif /* _LTQ_SVIP_H__ */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h new file mode 100644 index 0000000000..79966b7be7 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/mps_reg.h @@ -0,0 +1,242 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __MPS_REG_H +#define __MPS_REG_H + +#define mbs_r32(reg) ltq_r32(&mbs->reg) +#define mbs_w32(val, reg) ltq_w32(val, &mbs->reg) +#define mbs_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &mbs->reg) + +/** MBS register structure */ +struct svip_reg_mbs { + unsigned long reserved0[4]; + unsigned long mbsr0; /* 0x0010 */ + unsigned long mbsr1; /* 0x0014 */ + unsigned long mbsr2; /* 0x0018 */ + unsigned long mbsr3; /* 0x001c */ + unsigned long mbsr4; /* 0x0020 */ + unsigned long mbsr5; /* 0x0024 */ + unsigned long mbsr6; /* 0x0028 */ + unsigned long mbsr7; /* 0x002c */ + unsigned long mbsr8; /* 0x0030 */ + unsigned long mbsr9; /* 0x0034 */ + unsigned long mbsr10; /* 0x0038 */ + unsigned long mbsr11; /* 0x003c */ + unsigned long mbsr12; /* 0x0040 */ + unsigned long mbsr13; /* 0x0044 */ + unsigned long mbsr14; /* 0x0048 */ + unsigned long mbsr15; /* 0x004c */ + unsigned long mbsr16; /* 0x0050 */ + unsigned long mbsr17; /* 0x0054 */ + unsigned long mbsr18; /* 0x0058 */ + unsigned long mbsr19; /* 0x005c */ + unsigned long mbsr20; /* 0x0060 */ + unsigned long mbsr21; /* 0x0064 */ + unsigned long mbsr22; /* 0x0068 */ + unsigned long mbsr23; /* 0x006c */ + unsigned long mbsr24; /* 0x0070 */ + unsigned long mbsr25; /* 0x0074 */ + unsigned long mbsr26; /* 0x0078 */ + unsigned long mbsr27; /* 0x007c */ + unsigned long mbsr28; /* 0x0080 */ +}; + +/** MPS register structure */ +struct svip_reg_mps { + volatile unsigned long mps_swirn0set; /* 0x0000 */ + volatile unsigned long mps_swirn0en; /* 0x0004 */ + volatile unsigned long mps_swirn0cr; /* 0x0008 */ + volatile unsigned long mps_swirn0icr; /* 0x000C */ + volatile unsigned long mps_swirn1set; /* 0x0010 */ + volatile unsigned long mps_swirn1en; /* 0x0014 */ + volatile unsigned long mps_swirn1cr; /* 0x0018 */ + volatile unsigned long mps_swirn1icr; /* 0x001C */ + volatile unsigned long mps_swirn2set; /* 0x0020 */ + volatile unsigned long mps_swirn2en; /* 0x0024 */ + volatile unsigned long mps_swirn2cr; /* 0x0028 */ + volatile unsigned long mps_swirn2icr; /* 0x002C */ + volatile unsigned long mps_swirn3set; /* 0x0030 */ + volatile unsigned long mps_swirn3en; /* 0x0034 */ + volatile unsigned long mps_swirn3cr; /* 0x0038 */ + volatile unsigned long mps_swirn3icr; /* 0x003C */ + volatile unsigned long mps_swirn4set; /* 0x0040 */ + volatile unsigned long mps_swirn4en; /* 0x0044 */ + volatile unsigned long mps_swirn4cr; /* 0x0048 */ + volatile unsigned long mps_swirn4icr; /* 0x004C */ + volatile unsigned long mps_swirn5set; /* 0x0050 */ + volatile unsigned long mps_swirn5en; /* 0x0054 */ + volatile unsigned long mps_swirn5cr; /* 0x0058 */ + volatile unsigned long mps_swirn5icr; /* 0x005C */ + volatile unsigned long mps_swirn6set; /* 0x0060 */ + volatile unsigned long mps_swirn6en; /* 0x0064 */ + volatile unsigned long mps_swirn6cr; /* 0x0068 */ + volatile unsigned long mps_swirn6icr; /* 0x006C */ + volatile unsigned long mps_swirn7set; /* 0x0070 */ + volatile unsigned long mps_swirn7en; /* 0x0074 */ + volatile unsigned long mps_swirn7cr; /* 0x0078 */ + volatile unsigned long mps_swirn7icr; /* 0x007C */ + volatile unsigned long mps_swirn8set; /* 0x0080 */ + volatile unsigned long mps_swirn8en; /* 0x0084 */ + volatile unsigned long mps_swirn8cr; /* 0x0088 */ + volatile unsigned long mps_swirn8icr; /* 0x008C */ +}; + +/* Software Interrupt */ +#define IFX_MPS_SWIRN0SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0000)) +#define IFX_MPS_SWIRN0EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0004)) +#define IFX_MPS_SWIRN0CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0008)) +#define IFX_MPS_SWIRN0ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x000C)) +#define IFX_MPS_SWIRN1SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0010)) +#define IFX_MPS_SWIRN1EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0014)) +#define IFX_MPS_SWIRN1CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0018)) +#define IFX_MPS_SWIRN1ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x001C)) +#define IFX_MPS_SWIRN2SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0020)) +#define IFX_MPS_SWIRN2EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0024)) +#define IFX_MPS_SWIRN2CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0028)) +#define IFX_MPS_SWIRN2ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x002C)) +#define IFX_MPS_SWIRN3SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0030)) +#define IFX_MPS_SWIRN3EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0034)) +#define IFX_MPS_SWIRN3CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0038)) +#define IFX_MPS_SWIRN3ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x003C)) +#define IFX_MPS_SWIRN4SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0040)) +#define IFX_MPS_SWIRN4EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0044)) +#define IFX_MPS_SWIRN4CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0048)) +#define IFX_MPS_SWIRN4ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x004C)) +#define IFX_MPS_SWIRN5SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0050)) +#define IFX_MPS_SWIRN5EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0054)) +#define IFX_MPS_SWIRN5CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0058)) +#define IFX_MPS_SWIRN5ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x005C)) +#define IFX_MPS_SWIRN6SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0060)) +#define IFX_MPS_SWIRN6EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0064)) +#define IFX_MPS_SWIRN6CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0068)) +#define IFX_MPS_SWIRN6ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x006C)) +#define IFX_MPS_SWIRN7SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0070)) +#define IFX_MPS_SWIRN7EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0074)) +#define IFX_MPS_SWIRN7CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0078)) +#define IFX_MPS_SWIRN7ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x007C)) +#define IFX_MPS_SWIRN8SET ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0080)) +#define IFX_MPS_SWIRN8EN ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0084)) +#define IFX_MPS_SWIRN8ICR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x008C)) +#define IFX_MPS_SWIRN8CR ((volatile unsigned int*)(LTQ_SWINT_BASE + 0x0088)) + +/******************************************************************************* + * MPS_SWIRNSET Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNSET_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNSET_IR5_VAL(val) (((val) & 0x1) << 5) +#define IFX_MPS_SWIRNSET_IR5_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR5) | (val) & 1) << 5) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNSET_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNSET_IR4_VAL(val) (((val) & 0x1) << 4) +#define IFX_MPS_SWIRNSET_IR4_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR4) | (val) & 1) << 4) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNSET_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNSET_IR3_VAL(val) (((val) & 0x1) << 3) +#define IFX_MPS_SWIRNSET_IR3_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR3) | (val) & 1) << 3) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNSET_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNSET_IR2_VAL(val) (((val) & 0x1) << 2) +#define IFX_MPS_SWIRNSET_IR2_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR2) | (val) & 1) << 2) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNSET_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNSET_IR1_VAL(val) (((val) & 0x1) << 1) +#define IFX_MPS_SWIRNSET_IR1_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR1) | (val) & 1) << 1) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNSET_IR0 (0x1) +#define IFX_MPS_SWIRNSET_IR0_VAL(val) (((val) & 0x1) << 0) +#define IFX_MPS_SWIRNSET_IR0_SET(reg,val) (reg) = (((reg & ~IFX_MPS_SWIRNSET_IR0) | (val) & 1) << 0) + +/******************************************************************************* + * MPS_SWIRNEN Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNEN_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNEN_IR5_VAL(val) (((val) & 0x1) << 5) +#define IFX_MPS_SWIRNEN_IR5_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR5) >> 5) & 0x1) +#define IFX_MPS_SWIRNEN_IR5_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR5) | (((val) & 0x1) << 5)) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNEN_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNEN_IR4_VAL(val) (((val) & 0x1) << 4) +#define IFX_MPS_SWIRNEN_IR4_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR4) >> 4) & 0x1) +#define IFX_MPS_SWIRNEN_IR4_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR4) | (((val) & 0x1) << 4)) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNEN_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNEN_IR3_VAL(val) (((val) & 0x1) << 3) +#define IFX_MPS_SWIRNEN_IR3_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR3) >> 3) & 0x1) +#define IFX_MPS_SWIRNEN_IR3_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR3) | (((val) & 0x1) << 3)) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNEN_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNEN_IR2_VAL(val) (((val) & 0x1) << 2) +#define IFX_MPS_SWIRNEN_IR2_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR2) >> 2) & 0x1) +#define IFX_MPS_SWIRNEN_IR2_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR2) | (((val) & 0x1) << 2)) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNEN_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNEN_IR1_VAL(val) (((val) & 0x1) << 1) +#define IFX_MPS_SWIRNEN_IR1_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR1) >> 1) & 0x1) +#define IFX_MPS_SWIRNEN_IR1_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR1) | (((val) & 0x1) << 1)) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNEN_IR0 (0x1) +#define IFX_MPS_SWIRNEN_IR0_VAL(val) (((val) & 0x1) << 0) +#define IFX_MPS_SWIRNEN_IR0_GET(val) ((((val) & IFX_MPS_SWIRNEN_IR0) >> 0) & 0x1) +#define IFX_MPS_SWIRNEN_IR0_SET(reg,val) (reg) = ((reg & ~IFX_MPS_SWIRNEN_IR0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * MPS_SWIRNICR Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNICR_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNICR_IR5_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR5) >> 5) & 0x1) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNICR_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNICR_IR4_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR4) >> 4) & 0x1) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNICR_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNICR_IR3_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR3) >> 3) & 0x1) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNICR_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNICR_IR2_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR2) >> 2) & 0x1) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNICR_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNICR_IR1_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR1) >> 1) & 0x1) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNICR_IR0 (0x1) +#define IFX_MPS_SWIRNICR_IR0_GET(val) ((((val) & IFX_MPS_SWIRNICR_IR0) >> 0) & 0x1) + +/******************************************************************************* + * MPS_SWIRNCR Register + ******************************************************************************/ + +/* Software Interrupt Request IR5 (5) */ +#define IFX_MPS_SWIRNCR_IR5 (0x1 << 5) +#define IFX_MPS_SWIRNCR_IR5_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR5) >> 5) & 0x1) +/* Software Interrupt Request IR4 (4) */ +#define IFX_MPS_SWIRNCR_IR4 (0x1 << 4) +#define IFX_MPS_SWIRNCR_IR4_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR4) >> 4) & 0x1) +/* Software Interrupt Request IR3 (3) */ +#define IFX_MPS_SWIRNCR_IR3 (0x1 << 3) +#define IFX_MPS_SWIRNCR_IR3_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR3) >> 3) & 0x1) +/* Software Interrupt Request IR2 (2) */ +#define IFX_MPS_SWIRNCR_IR2 (0x1 << 2) +#define IFX_MPS_SWIRNCR_IR2_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR2) >> 2) & 0x1) +/* Software Interrupt Request IR1 (1) */ +#define IFX_MPS_SWIRNCR_IR1 (0x1 << 1) +#define IFX_MPS_SWIRNCR_IR1_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR1) >> 1) & 0x1) +/* Software Interrupt Request IR0 (0) */ +#define IFX_MPS_SWIRNCR_IR0 (0x1) +#define IFX_MPS_SWIRNCR_IR0_GET(val) ((((val) & IFX_MPS_SWIRNCR_IR0) >> 0) & 0x1) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/port_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/port_reg.h new file mode 100644 index 0000000000..57d04917fc --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/port_reg.h @@ -0,0 +1,3262 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __PORT_REG_H +#define __PORT_REG_H + +#define port_r32(reg) __raw_readl(®) +#define port_w32(val, reg) __raw_writel(val, ®) + +/** PORT register structure */ +struct svip_reg_port { + volatile u32 out; /* 0x0000 */ + volatile u32 in; /* 0x0004 */ + volatile u32 dir; /* 0x0008 */ + volatile u32 altsel0; /* 0x000C */ + volatile u32 altsel1; /* 0x0010 */ + volatile u32 puen; /* 0x0014 */ + volatile u32 exintcr0; /* 0x0018 */ + volatile u32 exintcr1; /* 0x001C */ + volatile u32 irncr; /* 0x0020 */ + volatile u32 irnicr; /* 0x0024 */ + volatile u32 irnen; /* 0x0028 */ + volatile u32 irncfg; /* 0x002C */ + volatile u32 irnenset; /* 0x0030 */ + volatile u32 irnenclr; /* 0x0034 */ +}; + +/******************************************************************************* + * Port 0 Data Output Register + ******************************************************************************/ + +/* Port 0 Pin # Output Value (19) */ +#define PORT_P0_OUT_P19 (0x1 << 19) +#define PORT_P0_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_OUT_P19_GET(val) ((((val) & PORT_P0_OUT_P19) >> 19) & 0x1) +#define PORT_P0_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 0 Pin # Output Value (18) */ +#define PORT_P0_OUT_P18 (0x1 << 18) +#define PORT_P0_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_OUT_P18_GET(val) ((((val) & PORT_P0_OUT_P18) >> 18) & 0x1) +#define PORT_P0_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 0 Pin # Output Value (17) */ +#define PORT_P0_OUT_P17 (0x1 << 17) +#define PORT_P0_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_OUT_P17_GET(val) ((((val) & PORT_P0_OUT_P17) >> 17) & 0x1) +#define PORT_P0_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 0 Pin # Output Value (16) */ +#define PORT_P0_OUT_P16 (0x1 << 16) +#define PORT_P0_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_OUT_P16_GET(val) ((((val) & PORT_P0_OUT_P16) >> 16) & 0x1) +#define PORT_P0_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 0 Pin # Output Value (15) */ +#define PORT_P0_OUT_P15 (0x1 << 15) +#define PORT_P0_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_OUT_P15_GET(val) ((((val) & PORT_P0_OUT_P15) >> 15) & 0x1) +#define PORT_P0_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 0 Pin # Output Value (14) */ +#define PORT_P0_OUT_P14 (0x1 << 14) +#define PORT_P0_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_OUT_P14_GET(val) ((((val) & PORT_P0_OUT_P14) >> 14) & 0x1) +#define PORT_P0_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 0 Pin # Output Value (13) */ +#define PORT_P0_OUT_P13 (0x1 << 13) +#define PORT_P0_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_OUT_P13_GET(val) ((((val) & PORT_P0_OUT_P13) >> 13) & 0x1) +#define PORT_P0_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 0 Pin # Output Value (12) */ +#define PORT_P0_OUT_P12 (0x1 << 12) +#define PORT_P0_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_OUT_P12_GET(val) ((((val) & PORT_P0_OUT_P12) >> 12) & 0x1) +#define PORT_P0_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 0 Pin # Output Value (11) */ +#define PORT_P0_OUT_P11 (0x1 << 11) +#define PORT_P0_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_OUT_P11_GET(val) ((((val) & PORT_P0_OUT_P11) >> 11) & 0x1) +#define PORT_P0_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 0 Pin # Output Value (10) */ +#define PORT_P0_OUT_P10 (0x1 << 10) +#define PORT_P0_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_OUT_P10_GET(val) ((((val) & PORT_P0_OUT_P10) >> 10) & 0x1) +#define PORT_P0_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 0 Pin # Output Value (9) */ +#define PORT_P0_OUT_P9 (0x1 << 9) +#define PORT_P0_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_OUT_P9_GET(val) ((((val) & PORT_P0_OUT_P9) >> 9) & 0x1) +#define PORT_P0_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 0 Pin # Output Value (8) */ +#define PORT_P0_OUT_P8 (0x1 << 8) +#define PORT_P0_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_OUT_P8_GET(val) ((((val) & PORT_P0_OUT_P8) >> 8) & 0x1) +#define PORT_P0_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 0 Pin # Output Value (7) */ +#define PORT_P0_OUT_P7 (0x1 << 7) +#define PORT_P0_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_OUT_P7_GET(val) ((((val) & PORT_P0_OUT_P7) >> 7) & 0x1) +#define PORT_P0_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 0 Pin # Output Value (6) */ +#define PORT_P0_OUT_P6 (0x1 << 6) +#define PORT_P0_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_OUT_P6_GET(val) ((((val) & PORT_P0_OUT_P6) >> 6) & 0x1) +#define PORT_P0_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 0 Pin # Output Value (5) */ +#define PORT_P0_OUT_P5 (0x1 << 5) +#define PORT_P0_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_OUT_P5_GET(val) ((((val) & PORT_P0_OUT_P5) >> 5) & 0x1) +#define PORT_P0_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 0 Pin # Output Value (4) */ +#define PORT_P0_OUT_P4 (0x1 << 4) +#define PORT_P0_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_OUT_P4_GET(val) ((((val) & PORT_P0_OUT_P4) >> 4) & 0x1) +#define PORT_P0_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 0 Pin # Output Value (3) */ +#define PORT_P0_OUT_P3 (0x1 << 3) +#define PORT_P0_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_OUT_P3_GET(val) ((((val) & PORT_P0_OUT_P3) >> 3) & 0x1) +#define PORT_P0_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 0 Pin # Output Value (2) */ +#define PORT_P0_OUT_P2 (0x1 << 2) +#define PORT_P0_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_OUT_P2_GET(val) ((((val) & PORT_P0_OUT_P2) >> 2) & 0x1) +#define PORT_P0_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 0 Pin # Output Value (1) */ +#define PORT_P0_OUT_P1 (0x1 << 1) +#define PORT_P0_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_OUT_P1_GET(val) ((((val) & PORT_P0_OUT_P1) >> 1) & 0x1) +#define PORT_P0_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 0 Pin # Output Value (0) */ +#define PORT_P0_OUT_P0 (0x1) +#define PORT_P0_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_OUT_P0_GET(val) ((((val) & PORT_P0_OUT_P0) >> 0) & 0x1) +#define PORT_P0_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 Data Input Register + ******************************************************************************/ + +/* Port 0 Pin # Latched Input Value (19) */ +#define PORT_P0_IN_P19 (0x1 << 19) +#define PORT_P0_IN_P19_GET(val) ((((val) & PORT_P0_IN_P19) >> 19) & 0x1) +/* Port 0 Pin # Latched Input Value (18) */ +#define PORT_P0_IN_P18 (0x1 << 18) +#define PORT_P0_IN_P18_GET(val) ((((val) & PORT_P0_IN_P18) >> 18) & 0x1) +/* Port 0 Pin # Latched Input Value (17) */ +#define PORT_P0_IN_P17 (0x1 << 17) +#define PORT_P0_IN_P17_GET(val) ((((val) & PORT_P0_IN_P17) >> 17) & 0x1) +/* Port 0 Pin # Latched Input Value (16) */ +#define PORT_P0_IN_P16 (0x1 << 16) +#define PORT_P0_IN_P16_GET(val) ((((val) & PORT_P0_IN_P16) >> 16) & 0x1) +/* Port 0 Pin # Latched Input Value (15) */ +#define PORT_P0_IN_P15 (0x1 << 15) +#define PORT_P0_IN_P15_GET(val) ((((val) & PORT_P0_IN_P15) >> 15) & 0x1) +/* Port 0 Pin # Latched Input Value (14) */ +#define PORT_P0_IN_P14 (0x1 << 14) +#define PORT_P0_IN_P14_GET(val) ((((val) & PORT_P0_IN_P14) >> 14) & 0x1) +/* Port 0 Pin # Latched Input Value (13) */ +#define PORT_P0_IN_P13 (0x1 << 13) +#define PORT_P0_IN_P13_GET(val) ((((val) & PORT_P0_IN_P13) >> 13) & 0x1) +/* Port 0 Pin # Latched Input Value (12) */ +#define PORT_P0_IN_P12 (0x1 << 12) +#define PORT_P0_IN_P12_GET(val) ((((val) & PORT_P0_IN_P12) >> 12) & 0x1) +/* Port 0 Pin # Latched Input Value (11) */ +#define PORT_P0_IN_P11 (0x1 << 11) +#define PORT_P0_IN_P11_GET(val) ((((val) & PORT_P0_IN_P11) >> 11) & 0x1) +/* Port 0 Pin # Latched Input Value (10) */ +#define PORT_P0_IN_P10 (0x1 << 10) +#define PORT_P0_IN_P10_GET(val) ((((val) & PORT_P0_IN_P10) >> 10) & 0x1) +/* Port 0 Pin # Latched Input Value (9) */ +#define PORT_P0_IN_P9 (0x1 << 9) +#define PORT_P0_IN_P9_GET(val) ((((val) & PORT_P0_IN_P9) >> 9) & 0x1) +/* Port 0 Pin # Latched Input Value (8) */ +#define PORT_P0_IN_P8 (0x1 << 8) +#define PORT_P0_IN_P8_GET(val) ((((val) & PORT_P0_IN_P8) >> 8) & 0x1) +/* Port 0 Pin # Latched Input Value (7) */ +#define PORT_P0_IN_P7 (0x1 << 7) +#define PORT_P0_IN_P7_GET(val) ((((val) & PORT_P0_IN_P7) >> 7) & 0x1) +/* Port 0 Pin # Latched Input Value (6) */ +#define PORT_P0_IN_P6 (0x1 << 6) +#define PORT_P0_IN_P6_GET(val) ((((val) & PORT_P0_IN_P6) >> 6) & 0x1) +/* Port 0 Pin # Latched Input Value (5) */ +#define PORT_P0_IN_P5 (0x1 << 5) +#define PORT_P0_IN_P5_GET(val) ((((val) & PORT_P0_IN_P5) >> 5) & 0x1) +/* Port 0 Pin # Latched Input Value (4) */ +#define PORT_P0_IN_P4 (0x1 << 4) +#define PORT_P0_IN_P4_GET(val) ((((val) & PORT_P0_IN_P4) >> 4) & 0x1) +/* Port 0 Pin # Latched Input Value (3) */ +#define PORT_P0_IN_P3 (0x1 << 3) +#define PORT_P0_IN_P3_GET(val) ((((val) & PORT_P0_IN_P3) >> 3) & 0x1) +/* Port 0 Pin # Latched Input Value (2) */ +#define PORT_P0_IN_P2 (0x1 << 2) +#define PORT_P0_IN_P2_GET(val) ((((val) & PORT_P0_IN_P2) >> 2) & 0x1) +/* Port 0 Pin # Latched Input Value (1) */ +#define PORT_P0_IN_P1 (0x1 << 1) +#define PORT_P0_IN_P1_GET(val) ((((val) & PORT_P0_IN_P1) >> 1) & 0x1) +/* Port 0 Pin # Latched Input Value (0) */ +#define PORT_P0_IN_P0 (0x1) +#define PORT_P0_IN_P0_GET(val) ((((val) & PORT_P0_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 0 Direction Register + ******************************************************************************/ + +/* Port 0 Pin #Direction Control (19) */ +#define PORT_P0_DIR_P19 (0x1 << 19) +#define PORT_P0_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_DIR_P19_GET(val) ((((val) & PORT_P0_DIR_P19) >> 19) & 0x1) +#define PORT_P0_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 0 Pin #Direction Control (18) */ +#define PORT_P0_DIR_P18 (0x1 << 18) +#define PORT_P0_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_DIR_P18_GET(val) ((((val) & PORT_P0_DIR_P18) >> 18) & 0x1) +#define PORT_P0_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 0 Pin #Direction Control (17) */ +#define PORT_P0_DIR_P17 (0x1 << 17) +#define PORT_P0_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_DIR_P17_GET(val) ((((val) & PORT_P0_DIR_P17) >> 17) & 0x1) +#define PORT_P0_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 0 Pin #Direction Control (16) */ +#define PORT_P0_DIR_P16 (0x1 << 16) +#define PORT_P0_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_DIR_P16_GET(val) ((((val) & PORT_P0_DIR_P16) >> 16) & 0x1) +#define PORT_P0_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 0 Pin #Direction Control (15) */ +#define PORT_P0_DIR_P15 (0x1 << 15) +#define PORT_P0_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_DIR_P15_GET(val) ((((val) & PORT_P0_DIR_P15) >> 15) & 0x1) +#define PORT_P0_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 0 Pin #Direction Control (14) */ +#define PORT_P0_DIR_P14 (0x1 << 14) +#define PORT_P0_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_DIR_P14_GET(val) ((((val) & PORT_P0_DIR_P14) >> 14) & 0x1) +#define PORT_P0_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 0 Pin #Direction Control (13) */ +#define PORT_P0_DIR_P13 (0x1 << 13) +#define PORT_P0_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_DIR_P13_GET(val) ((((val) & PORT_P0_DIR_P13) >> 13) & 0x1) +#define PORT_P0_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 0 Pin #Direction Control (12) */ +#define PORT_P0_DIR_P12 (0x1 << 12) +#define PORT_P0_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_DIR_P12_GET(val) ((((val) & PORT_P0_DIR_P12) >> 12) & 0x1) +#define PORT_P0_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 0 Pin #Direction Control (11) */ +#define PORT_P0_DIR_P11 (0x1 << 11) +#define PORT_P0_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_DIR_P11_GET(val) ((((val) & PORT_P0_DIR_P11) >> 11) & 0x1) +#define PORT_P0_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 0 Pin #Direction Control (10) */ +#define PORT_P0_DIR_P10 (0x1 << 10) +#define PORT_P0_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_DIR_P10_GET(val) ((((val) & PORT_P0_DIR_P10) >> 10) & 0x1) +#define PORT_P0_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 0 Pin #Direction Control (9) */ +#define PORT_P0_DIR_P9 (0x1 << 9) +#define PORT_P0_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_DIR_P9_GET(val) ((((val) & PORT_P0_DIR_P9) >> 9) & 0x1) +#define PORT_P0_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 0 Pin #Direction Control (8) */ +#define PORT_P0_DIR_P8 (0x1 << 8) +#define PORT_P0_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_DIR_P8_GET(val) ((((val) & PORT_P0_DIR_P8) >> 8) & 0x1) +#define PORT_P0_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 0 Pin #Direction Control (7) */ +#define PORT_P0_DIR_P7 (0x1 << 7) +#define PORT_P0_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_DIR_P7_GET(val) ((((val) & PORT_P0_DIR_P7) >> 7) & 0x1) +#define PORT_P0_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 0 Pin #Direction Control (6) */ +#define PORT_P0_DIR_P6 (0x1 << 6) +#define PORT_P0_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_DIR_P6_GET(val) ((((val) & PORT_P0_DIR_P6) >> 6) & 0x1) +#define PORT_P0_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 0 Pin #Direction Control (5) */ +#define PORT_P0_DIR_P5 (0x1 << 5) +#define PORT_P0_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_DIR_P5_GET(val) ((((val) & PORT_P0_DIR_P5) >> 5) & 0x1) +#define PORT_P0_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 0 Pin #Direction Control (4) */ +#define PORT_P0_DIR_P4 (0x1 << 4) +#define PORT_P0_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_DIR_P4_GET(val) ((((val) & PORT_P0_DIR_P4) >> 4) & 0x1) +#define PORT_P0_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 0 Pin #Direction Control (3) */ +#define PORT_P0_DIR_P3 (0x1 << 3) +#define PORT_P0_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_DIR_P3_GET(val) ((((val) & PORT_P0_DIR_P3) >> 3) & 0x1) +#define PORT_P0_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 0 Pin #Direction Control (2) */ +#define PORT_P0_DIR_P2 (0x1 << 2) +#define PORT_P0_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_DIR_P2_GET(val) ((((val) & PORT_P0_DIR_P2) >> 2) & 0x1) +#define PORT_P0_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 0 Pin #Direction Control (1) */ +#define PORT_P0_DIR_P1 (0x1 << 1) +#define PORT_P0_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_DIR_P1_GET(val) ((((val) & PORT_P0_DIR_P1) >> 1) & 0x1) +#define PORT_P0_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 0 Pin #Direction Control (0) */ +#define PORT_P0_DIR_P0 (0x1) +#define PORT_P0_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_DIR_P0_GET(val) ((((val) & PORT_P0_DIR_P0) >> 0) & 0x1) +#define PORT_P0_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 0 Bit # (19) */ +#define PORT_P0_ALTSEL0_P19 (0x1 << 19) +#define PORT_P0_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_ALTSEL0_P19_GET(val) ((((val) & PORT_P0_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P0_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 0 Bit # (18) */ +#define PORT_P0_ALTSEL0_P18 (0x1 << 18) +#define PORT_P0_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_ALTSEL0_P18_GET(val) ((((val) & PORT_P0_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P0_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 0 Bit # (17) */ +#define PORT_P0_ALTSEL0_P17 (0x1 << 17) +#define PORT_P0_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_ALTSEL0_P17_GET(val) ((((val) & PORT_P0_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P0_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 0 Bit # (16) */ +#define PORT_P0_ALTSEL0_P16 (0x1 << 16) +#define PORT_P0_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_ALTSEL0_P16_GET(val) ((((val) & PORT_P0_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P0_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 0 Bit # (15) */ +#define PORT_P0_ALTSEL0_P15 (0x1 << 15) +#define PORT_P0_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_ALTSEL0_P15_GET(val) ((((val) & PORT_P0_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P0_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 0 Bit # (14) */ +#define PORT_P0_ALTSEL0_P14 (0x1 << 14) +#define PORT_P0_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_ALTSEL0_P14_GET(val) ((((val) & PORT_P0_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P0_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 0 Bit # (13) */ +#define PORT_P0_ALTSEL0_P13 (0x1 << 13) +#define PORT_P0_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_ALTSEL0_P13_GET(val) ((((val) & PORT_P0_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P0_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 0 Bit # (12) */ +#define PORT_P0_ALTSEL0_P12 (0x1 << 12) +#define PORT_P0_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_ALTSEL0_P12_GET(val) ((((val) & PORT_P0_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P0_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 0 Bit # (11) */ +#define PORT_P0_ALTSEL0_P11 (0x1 << 11) +#define PORT_P0_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_ALTSEL0_P11_GET(val) ((((val) & PORT_P0_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P0_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 0 Bit # (10) */ +#define PORT_P0_ALTSEL0_P10 (0x1 << 10) +#define PORT_P0_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_ALTSEL0_P10_GET(val) ((((val) & PORT_P0_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P0_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 0 Bit # (9) */ +#define PORT_P0_ALTSEL0_P9 (0x1 << 9) +#define PORT_P0_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_ALTSEL0_P9_GET(val) ((((val) & PORT_P0_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P0_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 0 Bit # (8) */ +#define PORT_P0_ALTSEL0_P8 (0x1 << 8) +#define PORT_P0_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_ALTSEL0_P8_GET(val) ((((val) & PORT_P0_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P0_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 0 Bit # (7) */ +#define PORT_P0_ALTSEL0_P7 (0x1 << 7) +#define PORT_P0_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_ALTSEL0_P7_GET(val) ((((val) & PORT_P0_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P0_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 0 Bit # (6) */ +#define PORT_P0_ALTSEL0_P6 (0x1 << 6) +#define PORT_P0_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_ALTSEL0_P6_GET(val) ((((val) & PORT_P0_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P0_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 0 Bit # (5) */ +#define PORT_P0_ALTSEL0_P5 (0x1 << 5) +#define PORT_P0_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_ALTSEL0_P5_GET(val) ((((val) & PORT_P0_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P0_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 0 Bit # (4) */ +#define PORT_P0_ALTSEL0_P4 (0x1 << 4) +#define PORT_P0_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_ALTSEL0_P4_GET(val) ((((val) & PORT_P0_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P0_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 0 Bit # (3) */ +#define PORT_P0_ALTSEL0_P3 (0x1 << 3) +#define PORT_P0_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_ALTSEL0_P3_GET(val) ((((val) & PORT_P0_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P0_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 0 Bit # (2) */ +#define PORT_P0_ALTSEL0_P2 (0x1 << 2) +#define PORT_P0_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_ALTSEL0_P2_GET(val) ((((val) & PORT_P0_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P0_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 0 Bit # (1) */ +#define PORT_P0_ALTSEL0_P1 (0x1 << 1) +#define PORT_P0_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_ALTSEL0_P1_GET(val) ((((val) & PORT_P0_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P0_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 0 Bit # (0) */ +#define PORT_P0_ALTSEL0_P0 (0x1) +#define PORT_P0_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_ALTSEL0_P0_GET(val) ((((val) & PORT_P0_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P0_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 0 Alternate Function Select Register 1 + ******************************************************************************/ + +/* Alternate Function at Port 0 Bit # (13) */ +#define PORT_P0_ALTSEL1_P13 (0x1 << 13) +#define PORT_P0_ALTSEL1_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_ALTSEL1_P13_GET(val) ((((val) & PORT_P0_ALTSEL1_P13) >> 13) & 0x1) +#define PORT_P0_ALTSEL1_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 0 Bit # (12) */ +#define PORT_P0_ALTSEL1_P12 (0x1 << 12) +#define PORT_P0_ALTSEL1_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_ALTSEL1_P12_GET(val) ((((val) & PORT_P0_ALTSEL1_P12) >> 12) & 0x1) +#define PORT_P0_ALTSEL1_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 0 Bit # (11) */ +#define PORT_P0_ALTSEL1_P11 (0x1 << 11) +#define PORT_P0_ALTSEL1_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_ALTSEL1_P11_GET(val) ((((val) & PORT_P0_ALTSEL1_P11) >> 11) & 0x1) +#define PORT_P0_ALTSEL1_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 0 Bit # (10) */ +#define PORT_P0_ALTSEL1_P10 (0x1 << 10) +#define PORT_P0_ALTSEL1_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_ALTSEL1_P10_GET(val) ((((val) & PORT_P0_ALTSEL1_P10) >> 10) & 0x1) +#define PORT_P0_ALTSEL1_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 0 Bit # (9) */ +#define PORT_P0_ALTSEL1_P9 (0x1 << 9) +#define PORT_P0_ALTSEL1_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_ALTSEL1_P9_GET(val) ((((val) & PORT_P0_ALTSEL1_P9) >> 9) & 0x1) +#define PORT_P0_ALTSEL1_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 0 Bit # (8) */ +#define PORT_P0_ALTSEL1_P8 (0x1 << 8) +#define PORT_P0_ALTSEL1_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_ALTSEL1_P8_GET(val) ((((val) & PORT_P0_ALTSEL1_P8) >> 8) & 0x1) +#define PORT_P0_ALTSEL1_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 0 Bit # (7) */ +#define PORT_P0_ALTSEL1_P7 (0x1 << 7) +#define PORT_P0_ALTSEL1_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_ALTSEL1_P7_GET(val) ((((val) & PORT_P0_ALTSEL1_P7) >> 7) & 0x1) +#define PORT_P0_ALTSEL1_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 0 Bit # (6) */ +#define PORT_P0_ALTSEL1_P6 (0x1 << 6) +#define PORT_P0_ALTSEL1_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_ALTSEL1_P6_GET(val) ((((val) & PORT_P0_ALTSEL1_P6) >> 6) & 0x1) +#define PORT_P0_ALTSEL1_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 0 Bit # (3) */ +#define PORT_P0_ALTSEL1_P3 (0x1 << 3) +#define PORT_P0_ALTSEL1_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_ALTSEL1_P3_GET(val) ((((val) & PORT_P0_ALTSEL1_P3) >> 3) & 0x1) +#define PORT_P0_ALTSEL1_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_ALTSEL1_P3) | (((val) & 0x1) << 3)) + +/******************************************************************************* + * Port 0 Pull Up Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 0 Bit # (19) */ +#define PORT_P0_PUEN_P19 (0x1 << 19) +#define PORT_P0_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_PUEN_P19_GET(val) ((((val) & PORT_P0_PUEN_P19) >> 19) & 0x1) +#define PORT_P0_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 0 Bit # (18) */ +#define PORT_P0_PUEN_P18 (0x1 << 18) +#define PORT_P0_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P0_PUEN_P18_GET(val) ((((val) & PORT_P0_PUEN_P18) >> 18) & 0x1) +#define PORT_P0_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 0 Bit # (17) */ +#define PORT_P0_PUEN_P17 (0x1 << 17) +#define PORT_P0_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_PUEN_P17_GET(val) ((((val) & PORT_P0_PUEN_P17) >> 17) & 0x1) +#define PORT_P0_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 0 Bit # (16) */ +#define PORT_P0_PUEN_P16 (0x1 << 16) +#define PORT_P0_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_PUEN_P16_GET(val) ((((val) & PORT_P0_PUEN_P16) >> 16) & 0x1) +#define PORT_P0_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 0 Bit # (15) */ +#define PORT_P0_PUEN_P15 (0x1 << 15) +#define PORT_P0_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_PUEN_P15_GET(val) ((((val) & PORT_P0_PUEN_P15) >> 15) & 0x1) +#define PORT_P0_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 0 Bit # (14) */ +#define PORT_P0_PUEN_P14 (0x1 << 14) +#define PORT_P0_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_PUEN_P14_GET(val) ((((val) & PORT_P0_PUEN_P14) >> 14) & 0x1) +#define PORT_P0_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 0 Bit # (13) */ +#define PORT_P0_PUEN_P13 (0x1 << 13) +#define PORT_P0_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_PUEN_P13_GET(val) ((((val) & PORT_P0_PUEN_P13) >> 13) & 0x1) +#define PORT_P0_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 0 Bit # (12) */ +#define PORT_P0_PUEN_P12 (0x1 << 12) +#define PORT_P0_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_PUEN_P12_GET(val) ((((val) & PORT_P0_PUEN_P12) >> 12) & 0x1) +#define PORT_P0_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 0 Bit # (11) */ +#define PORT_P0_PUEN_P11 (0x1 << 11) +#define PORT_P0_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_PUEN_P11_GET(val) ((((val) & PORT_P0_PUEN_P11) >> 11) & 0x1) +#define PORT_P0_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 0 Bit # (10) */ +#define PORT_P0_PUEN_P10 (0x1 << 10) +#define PORT_P0_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_PUEN_P10_GET(val) ((((val) & PORT_P0_PUEN_P10) >> 10) & 0x1) +#define PORT_P0_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 0 Bit # (9) */ +#define PORT_P0_PUEN_P9 (0x1 << 9) +#define PORT_P0_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_PUEN_P9_GET(val) ((((val) & PORT_P0_PUEN_P9) >> 9) & 0x1) +#define PORT_P0_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 0 Bit # (8) */ +#define PORT_P0_PUEN_P8 (0x1 << 8) +#define PORT_P0_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_PUEN_P8_GET(val) ((((val) & PORT_P0_PUEN_P8) >> 8) & 0x1) +#define PORT_P0_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 0 Bit # (7) */ +#define PORT_P0_PUEN_P7 (0x1 << 7) +#define PORT_P0_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_PUEN_P7_GET(val) ((((val) & PORT_P0_PUEN_P7) >> 7) & 0x1) +#define PORT_P0_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 0 Bit # (6) */ +#define PORT_P0_PUEN_P6 (0x1 << 6) +#define PORT_P0_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P0_PUEN_P6_GET(val) ((((val) & PORT_P0_PUEN_P6) >> 6) & 0x1) +#define PORT_P0_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 0 Bit # (5) */ +#define PORT_P0_PUEN_P5 (0x1 << 5) +#define PORT_P0_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P0_PUEN_P5_GET(val) ((((val) & PORT_P0_PUEN_P5) >> 5) & 0x1) +#define PORT_P0_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 0 Bit # (4) */ +#define PORT_P0_PUEN_P4 (0x1 << 4) +#define PORT_P0_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P0_PUEN_P4_GET(val) ((((val) & PORT_P0_PUEN_P4) >> 4) & 0x1) +#define PORT_P0_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 0 Bit # (3) */ +#define PORT_P0_PUEN_P3 (0x1 << 3) +#define PORT_P0_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P0_PUEN_P3_GET(val) ((((val) & PORT_P0_PUEN_P3) >> 3) & 0x1) +#define PORT_P0_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 0 Bit # (2) */ +#define PORT_P0_PUEN_P2 (0x1 << 2) +#define PORT_P0_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P0_PUEN_P2_GET(val) ((((val) & PORT_P0_PUEN_P2) >> 2) & 0x1) +#define PORT_P0_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 0 Bit # (1) */ +#define PORT_P0_PUEN_P1 (0x1 << 1) +#define PORT_P0_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P0_PUEN_P1_GET(val) ((((val) & PORT_P0_PUEN_P1) >> 1) & 0x1) +#define PORT_P0_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 0 Bit # (0) */ +#define PORT_P0_PUEN_P0 (0x1) +#define PORT_P0_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P0_PUEN_P0_GET(val) ((((val) & PORT_P0_PUEN_P0) >> 0) & 0x1) +#define PORT_P0_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P0_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * External Interrupt Control Register 0 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT16 (19) */ +#define PORT_P0_EXINTCR0_EXINT16 (0x1 << 19) +#define PORT_P0_EXINTCR0_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_EXINTCR0_EXINT16_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT16) >> 19) & 0x1) +#define PORT_P0_EXINTCR0_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT16) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT10 (17) */ +#define PORT_P0_EXINTCR0_EXINT10 (0x1 << 17) +#define PORT_P0_EXINTCR0_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_EXINTCR0_EXINT10_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT10) >> 17) & 0x1) +#define PORT_P0_EXINTCR0_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT10) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT9 (16) */ +#define PORT_P0_EXINTCR0_EXINT9 (0x1 << 16) +#define PORT_P0_EXINTCR0_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_EXINTCR0_EXINT9_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT9) >> 16) & 0x1) +#define PORT_P0_EXINTCR0_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT9) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT8 (15) */ +#define PORT_P0_EXINTCR0_EXINT8 (0x1 << 15) +#define PORT_P0_EXINTCR0_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_EXINTCR0_EXINT8_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT8) >> 15) & 0x1) +#define PORT_P0_EXINTCR0_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT8) | (((val) & 0x1) << 15)) +/* Type of Level or Edge Detection of EXINT7 (14) */ +#define PORT_P0_EXINTCR0_EXINT7 (0x1 << 14) +#define PORT_P0_EXINTCR0_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_EXINTCR0_EXINT7_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT7) >> 14) & 0x1) +#define PORT_P0_EXINTCR0_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT7) | (((val) & 0x1) << 14)) +/* Type of Level or Edge Detection of EXINT6 (13) */ +#define PORT_P0_EXINTCR0_EXINT6 (0x1 << 13) +#define PORT_P0_EXINTCR0_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_EXINTCR0_EXINT6_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT6) >> 13) & 0x1) +#define PORT_P0_EXINTCR0_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT6) | (((val) & 0x1) << 13)) +/* Type of Level or Edge Detection of EXINT5 (12) */ +#define PORT_P0_EXINTCR0_EXINT5 (0x1 << 12) +#define PORT_P0_EXINTCR0_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_EXINTCR0_EXINT5_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT5) >> 12) & 0x1) +#define PORT_P0_EXINTCR0_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT5) | (((val) & 0x1) << 12)) +/* Type of Level or Edge Detection of EXINT4 (11) */ +#define PORT_P0_EXINTCR0_EXINT4 (0x1 << 11) +#define PORT_P0_EXINTCR0_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_EXINTCR0_EXINT4_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT4) >> 11) & 0x1) +#define PORT_P0_EXINTCR0_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT4) | (((val) & 0x1) << 11)) +/* Type of Level or Edge Detection of EXINT3 (10) */ +#define PORT_P0_EXINTCR0_EXINT3 (0x1 << 10) +#define PORT_P0_EXINTCR0_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_EXINTCR0_EXINT3_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT3) >> 10) & 0x1) +#define PORT_P0_EXINTCR0_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT3) | (((val) & 0x1) << 10)) +/* Type of Level or Edge Detection of EXINT2 (9) */ +#define PORT_P0_EXINTCR0_EXINT2 (0x1 << 9) +#define PORT_P0_EXINTCR0_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_EXINTCR0_EXINT2_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT2) >> 9) & 0x1) +#define PORT_P0_EXINTCR0_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT2) | (((val) & 0x1) << 9)) +/* Type of Level or Edge Detection of EXINT1 (8) */ +#define PORT_P0_EXINTCR0_EXINT1 (0x1 << 8) +#define PORT_P0_EXINTCR0_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_EXINTCR0_EXINT1_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT1) >> 8) & 0x1) +#define PORT_P0_EXINTCR0_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT1) | (((val) & 0x1) << 8)) +/* Type of Level or Edge Detection of EXINT0 (7) */ +#define PORT_P0_EXINTCR0_EXINT0 (0x1 << 7) +#define PORT_P0_EXINTCR0_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_EXINTCR0_EXINT0_GET(val) ((((val) & PORT_P0_EXINTCR0_EXINT0) >> 7) & 0x1) +#define PORT_P0_EXINTCR0_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR0_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * External Interrupt Control Register 1 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT16 (19) */ +#define PORT_P0_EXINTCR1_EXINT16 (0x1 << 19) +#define PORT_P0_EXINTCR1_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_EXINTCR1_EXINT16_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT16) >> 19) & 0x1) +#define PORT_P0_EXINTCR1_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT16) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT10 (17) */ +#define PORT_P0_EXINTCR1_EXINT10 (0x1 << 17) +#define PORT_P0_EXINTCR1_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_EXINTCR1_EXINT10_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT10) >> 17) & 0x1) +#define PORT_P0_EXINTCR1_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT10) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT9 (16) */ +#define PORT_P0_EXINTCR1_EXINT9 (0x1 << 16) +#define PORT_P0_EXINTCR1_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_EXINTCR1_EXINT9_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT9) >> 16) & 0x1) +#define PORT_P0_EXINTCR1_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT9) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT8 (15) */ +#define PORT_P0_EXINTCR1_EXINT8 (0x1 << 15) +#define PORT_P0_EXINTCR1_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_EXINTCR1_EXINT8_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT8) >> 15) & 0x1) +#define PORT_P0_EXINTCR1_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT8) | (((val) & 0x1) << 15)) +/* Type of Level or Edge Detection of EXINT7 (14) */ +#define PORT_P0_EXINTCR1_EXINT7 (0x1 << 14) +#define PORT_P0_EXINTCR1_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_EXINTCR1_EXINT7_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT7) >> 14) & 0x1) +#define PORT_P0_EXINTCR1_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT7) | (((val) & 0x1) << 14)) +/* Type of Level or Edge Detection of EXINT6 (13) */ +#define PORT_P0_EXINTCR1_EXINT6 (0x1 << 13) +#define PORT_P0_EXINTCR1_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_EXINTCR1_EXINT6_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT6) >> 13) & 0x1) +#define PORT_P0_EXINTCR1_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT6) | (((val) & 0x1) << 13)) +/* Type of Level or Edge Detection of EXINT5 (12) */ +#define PORT_P0_EXINTCR1_EXINT5 (0x1 << 12) +#define PORT_P0_EXINTCR1_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_EXINTCR1_EXINT5_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT5) >> 12) & 0x1) +#define PORT_P0_EXINTCR1_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT5) | (((val) & 0x1) << 12)) +/* Type of Level or Edge Detection of EXINT4 (11) */ +#define PORT_P0_EXINTCR1_EXINT4 (0x1 << 11) +#define PORT_P0_EXINTCR1_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_EXINTCR1_EXINT4_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT4) >> 11) & 0x1) +#define PORT_P0_EXINTCR1_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT4) | (((val) & 0x1) << 11)) +/* Type of Level or Edge Detection of EXINT3 (10) */ +#define PORT_P0_EXINTCR1_EXINT3 (0x1 << 10) +#define PORT_P0_EXINTCR1_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_EXINTCR1_EXINT3_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT3) >> 10) & 0x1) +#define PORT_P0_EXINTCR1_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT3) | (((val) & 0x1) << 10)) +/* Type of Level or Edge Detection of EXINT2 (9) */ +#define PORT_P0_EXINTCR1_EXINT2 (0x1 << 9) +#define PORT_P0_EXINTCR1_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_EXINTCR1_EXINT2_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT2) >> 9) & 0x1) +#define PORT_P0_EXINTCR1_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT2) | (((val) & 0x1) << 9)) +/* Type of Level or Edge Detection of EXINT1 (8) */ +#define PORT_P0_EXINTCR1_EXINT1 (0x1 << 8) +#define PORT_P0_EXINTCR1_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_EXINTCR1_EXINT1_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT1) >> 8) & 0x1) +#define PORT_P0_EXINTCR1_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT1) | (((val) & 0x1) << 8)) +/* Type of Level or Edge Detection of EXINT0 (7) */ +#define PORT_P0_EXINTCR1_EXINT0 (0x1 << 7) +#define PORT_P0_EXINTCR1_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_EXINTCR1_EXINT0_GET(val) ((((val) & PORT_P0_EXINTCR1_EXINT0) >> 7) & 0x1) +#define PORT_P0_EXINTCR1_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_EXINTCR1_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * P0_IRNEN Register + ******************************************************************************/ + +/* EXINT16 Interrupt Request Enable (19) */ +#define PORT_P0_IRNEN_EXINT16 (0x1 << 19) +#define PORT_P0_IRNEN_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNEN_EXINT16_GET(val) ((((val) & PORT_P0_IRNEN_EXINT16) >> 19) & 0x1) +#define PORT_P0_IRNEN_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT16) | (((val) & 0x1) << 19)) +/* EXINT10 Interrupt Request Enable (17) */ +#define PORT_P0_IRNEN_EXINT10 (0x1 << 17) +#define PORT_P0_IRNEN_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNEN_EXINT10_GET(val) ((((val) & PORT_P0_IRNEN_EXINT10) >> 17) & 0x1) +#define PORT_P0_IRNEN_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT10) | (((val) & 0x1) << 17)) +/* EXINT9 Interrupt Request Enable (16) */ +#define PORT_P0_IRNEN_EXINT9 (0x1 << 16) +#define PORT_P0_IRNEN_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNEN_EXINT9_GET(val) ((((val) & PORT_P0_IRNEN_EXINT9) >> 16) & 0x1) +#define PORT_P0_IRNEN_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT9) | (((val) & 0x1) << 16)) +/* EXINT8 Interrupt Request Enable (15) */ +#define PORT_P0_IRNEN_EXINT8 (0x1 << 15) +#define PORT_P0_IRNEN_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNEN_EXINT8_GET(val) ((((val) & PORT_P0_IRNEN_EXINT8) >> 15) & 0x1) +#define PORT_P0_IRNEN_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT8) | (((val) & 0x1) << 15)) +/* EXINT7 Interrupt Request Enable (14) */ +#define PORT_P0_IRNEN_EXINT7 (0x1 << 14) +#define PORT_P0_IRNEN_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNEN_EXINT7_GET(val) ((((val) & PORT_P0_IRNEN_EXINT7) >> 14) & 0x1) +#define PORT_P0_IRNEN_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT7) | (((val) & 0x1) << 14)) +/* EXINT6 Interrupt Request Enable (13) */ +#define PORT_P0_IRNEN_EXINT6 (0x1 << 13) +#define PORT_P0_IRNEN_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNEN_EXINT6_GET(val) ((((val) & PORT_P0_IRNEN_EXINT6) >> 13) & 0x1) +#define PORT_P0_IRNEN_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT6) | (((val) & 0x1) << 13)) +/* EXINT5 Interrupt Request Enable (12) */ +#define PORT_P0_IRNEN_EXINT5 (0x1 << 12) +#define PORT_P0_IRNEN_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNEN_EXINT5_GET(val) ((((val) & PORT_P0_IRNEN_EXINT5) >> 12) & 0x1) +#define PORT_P0_IRNEN_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT5) | (((val) & 0x1) << 12)) +/* EXINT4 Interrupt Request Enable (11) */ +#define PORT_P0_IRNEN_EXINT4 (0x1 << 11) +#define PORT_P0_IRNEN_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNEN_EXINT4_GET(val) ((((val) & PORT_P0_IRNEN_EXINT4) >> 11) & 0x1) +#define PORT_P0_IRNEN_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT4) | (((val) & 0x1) << 11)) +/* EXINT3 Interrupt Request Enable (10) */ +#define PORT_P0_IRNEN_EXINT3 (0x1 << 10) +#define PORT_P0_IRNEN_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNEN_EXINT3_GET(val) ((((val) & PORT_P0_IRNEN_EXINT3) >> 10) & 0x1) +#define PORT_P0_IRNEN_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT3) | (((val) & 0x1) << 10)) +/* EXINT2 Interrupt Request Enable (9) */ +#define PORT_P0_IRNEN_EXINT2 (0x1 << 9) +#define PORT_P0_IRNEN_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNEN_EXINT2_GET(val) ((((val) & PORT_P0_IRNEN_EXINT2) >> 9) & 0x1) +#define PORT_P0_IRNEN_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT2) | (((val) & 0x1) << 9)) +/* EXINT1 Interrupt Request Enable (8) */ +#define PORT_P0_IRNEN_EXINT1 (0x1 << 8) +#define PORT_P0_IRNEN_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNEN_EXINT1_GET(val) ((((val) & PORT_P0_IRNEN_EXINT1) >> 8) & 0x1) +#define PORT_P0_IRNEN_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT1) | (((val) & 0x1) << 8)) +/* EXINT0 Interrupt Request Enable (7) */ +#define PORT_P0_IRNEN_EXINT0 (0x1 << 7) +#define PORT_P0_IRNEN_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNEN_EXINT0_GET(val) ((((val) & PORT_P0_IRNEN_EXINT0) >> 7) & 0x1) +#define PORT_P0_IRNEN_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNEN_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * P0_IRNICR Register + ******************************************************************************/ + +/* EXINT16 Interrupt Request (19) */ +#define PORT_P0_IRNICR_EXINT16 (0x1 << 19) +#define PORT_P0_IRNICR_EXINT16_GET(val) ((((val) & PORT_P0_IRNICR_EXINT16) >> 19) & 0x1) +/* EXINT10 Interrupt Request (17) */ +#define PORT_P0_IRNICR_EXINT10 (0x1 << 17) +#define PORT_P0_IRNICR_EXINT10_GET(val) ((((val) & PORT_P0_IRNICR_EXINT10) >> 17) & 0x1) +/* EXINT9 Interrupt Request (16) */ +#define PORT_P0_IRNICR_EXINT9 (0x1 << 16) +#define PORT_P0_IRNICR_EXINT9_GET(val) ((((val) & PORT_P0_IRNICR_EXINT9) >> 16) & 0x1) +/* EXINT8 Interrupt Request (15) */ +#define PORT_P0_IRNICR_EXINT8 (0x1 << 15) +#define PORT_P0_IRNICR_EXINT8_GET(val) ((((val) & PORT_P0_IRNICR_EXINT8) >> 15) & 0x1) +/* EXINT7 Interrupt Request (14) */ +#define PORT_P0_IRNICR_EXINT7 (0x1 << 14) +#define PORT_P0_IRNICR_EXINT7_GET(val) ((((val) & PORT_P0_IRNICR_EXINT7) >> 14) & 0x1) +/* EXINT6 Interrupt Request (13) */ +#define PORT_P0_IRNICR_EXINT6 (0x1 << 13) +#define PORT_P0_IRNICR_EXINT6_GET(val) ((((val) & PORT_P0_IRNICR_EXINT6) >> 13) & 0x1) +/* EXINT5 Interrupt Request (12) */ +#define PORT_P0_IRNICR_EXINT5 (0x1 << 12) +#define PORT_P0_IRNICR_EXINT5_GET(val) ((((val) & PORT_P0_IRNICR_EXINT5) >> 12) & 0x1) +/* EXINT4 Interrupt Request (11) */ +#define PORT_P0_IRNICR_EXINT4 (0x1 << 11) +#define PORT_P0_IRNICR_EXINT4_GET(val) ((((val) & PORT_P0_IRNICR_EXINT4) >> 11) & 0x1) +/* EXINT3 Interrupt Request (10) */ +#define PORT_P0_IRNICR_EXINT3 (0x1 << 10) +#define PORT_P0_IRNICR_EXINT3_GET(val) ((((val) & PORT_P0_IRNICR_EXINT3) >> 10) & 0x1) +/* EXINT2 Interrupt Request (9) */ +#define PORT_P0_IRNICR_EXINT2 (0x1 << 9) +#define PORT_P0_IRNICR_EXINT2_GET(val) ((((val) & PORT_P0_IRNICR_EXINT2) >> 9) & 0x1) +/* EXINT1 Interrupt Request (8) */ +#define PORT_P0_IRNICR_EXINT1 (0x1 << 8) +#define PORT_P0_IRNICR_EXINT1_GET(val) ((((val) & PORT_P0_IRNICR_EXINT1) >> 8) & 0x1) +/* EXINT0 Interrupt Request (7) */ +#define PORT_P0_IRNICR_EXINT0 (0x1 << 7) +#define PORT_P0_IRNICR_EXINT0_GET(val) ((((val) & PORT_P0_IRNICR_EXINT0) >> 7) & 0x1) + +/******************************************************************************* + * P0_IRNCR Register + ******************************************************************************/ + +/* EXINT16 Interrupt Request (19) */ +#define PORT_P0_IRNCR_EXINT16 (0x1 << 19) +#define PORT_P0_IRNCR_EXINT16_GET(val) ((((val) & PORT_P0_IRNCR_EXINT16) >> 19) & 0x1) +/* EXINT10 Interrupt Request (17) */ +#define PORT_P0_IRNCR_EXINT10 (0x1 << 17) +#define PORT_P0_IRNCR_EXINT10_GET(val) ((((val) & PORT_P0_IRNCR_EXINT10) >> 17) & 0x1) +/* EXINT9 Interrupt Request (16) */ +#define PORT_P0_IRNCR_EXINT9 (0x1 << 16) +#define PORT_P0_IRNCR_EXINT9_GET(val) ((((val) & PORT_P0_IRNCR_EXINT9) >> 16) & 0x1) +/* EXINT8 Interrupt Request (15) */ +#define PORT_P0_IRNCR_EXINT8 (0x1 << 15) +#define PORT_P0_IRNCR_EXINT8_GET(val) ((((val) & PORT_P0_IRNCR_EXINT8) >> 15) & 0x1) +/* EXINT7 Interrupt Request (14) */ +#define PORT_P0_IRNCR_EXINT7 (0x1 << 14) +#define PORT_P0_IRNCR_EXINT7_GET(val) ((((val) & PORT_P0_IRNCR_EXINT7) >> 14) & 0x1) +/* EXINT6 Interrupt Request (13) */ +#define PORT_P0_IRNCR_EXINT6 (0x1 << 13) +#define PORT_P0_IRNCR_EXINT6_GET(val) ((((val) & PORT_P0_IRNCR_EXINT6) >> 13) & 0x1) +/* EXINT5 Interrupt Request (12) */ +#define PORT_P0_IRNCR_EXINT5 (0x1 << 12) +#define PORT_P0_IRNCR_EXINT5_GET(val) ((((val) & PORT_P0_IRNCR_EXINT5) >> 12) & 0x1) +/* EXINT4 Interrupt Request (11) */ +#define PORT_P0_IRNCR_EXINT4 (0x1 << 11) +#define PORT_P0_IRNCR_EXINT4_GET(val) ((((val) & PORT_P0_IRNCR_EXINT4) >> 11) & 0x1) +/* EXINT3 Interrupt Request (10) */ +#define PORT_P0_IRNCR_EXINT3 (0x1 << 10) +#define PORT_P0_IRNCR_EXINT3_GET(val) ((((val) & PORT_P0_IRNCR_EXINT3) >> 10) & 0x1) +/* EXINT2 Interrupt Request (9) */ +#define PORT_P0_IRNCR_EXINT2 (0x1 << 9) +#define PORT_P0_IRNCR_EXINT2_GET(val) ((((val) & PORT_P0_IRNCR_EXINT2) >> 9) & 0x1) +/* EXINT1 Interrupt Request (8) */ +#define PORT_P0_IRNCR_EXINT1 (0x1 << 8) +#define PORT_P0_IRNCR_EXINT1_GET(val) ((((val) & PORT_P0_IRNCR_EXINT1) >> 8) & 0x1) +/* EXINT0 Interrupt Request (7) */ +#define PORT_P0_IRNCR_EXINT0 (0x1 << 7) +#define PORT_P0_IRNCR_EXINT0_GET(val) ((((val) & PORT_P0_IRNCR_EXINT0) >> 7) & 0x1) + +/******************************************************************************* + * P0 External Event Detection Configuration Register + ******************************************************************************/ + +/* EXINT16 configured for Edge or Level Detection (19) */ +#define PORT_P0_IRNCFG_EXINT16 (0x1 << 19) +#define PORT_P0_IRNCFG_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNCFG_EXINT16_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT16) >> 19) & 0x1) +#define PORT_P0_IRNCFG_EXINT16_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT16) | (((val) & 0x1) << 19)) +/* EXINT10 configured for Edge or Level Detection (17) */ +#define PORT_P0_IRNCFG_EXINT10 (0x1 << 17) +#define PORT_P0_IRNCFG_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNCFG_EXINT10_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT10) >> 17) & 0x1) +#define PORT_P0_IRNCFG_EXINT10_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT10) | (((val) & 0x1) << 17)) +/* EXINT9 configured for Edge or Level Detection (16) */ +#define PORT_P0_IRNCFG_EXINT9 (0x1 << 16) +#define PORT_P0_IRNCFG_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNCFG_EXINT9_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT9) >> 16) & 0x1) +#define PORT_P0_IRNCFG_EXINT9_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT9) | (((val) & 0x1) << 16)) +/* EXINT8 configured for Edge or Level Detection (15) */ +#define PORT_P0_IRNCFG_EXINT8 (0x1 << 15) +#define PORT_P0_IRNCFG_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNCFG_EXINT8_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT8) >> 15) & 0x1) +#define PORT_P0_IRNCFG_EXINT8_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT8) | (((val) & 0x1) << 15)) +/* EXINT7 configured for Edge or Level Detection (14) */ +#define PORT_P0_IRNCFG_EXINT7 (0x1 << 14) +#define PORT_P0_IRNCFG_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNCFG_EXINT7_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT7) >> 14) & 0x1) +#define PORT_P0_IRNCFG_EXINT7_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT7) | (((val) & 0x1) << 14)) +/* EXINT6 configured for Edge or Level Detection (13) */ +#define PORT_P0_IRNCFG_EXINT6 (0x1 << 13) +#define PORT_P0_IRNCFG_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNCFG_EXINT6_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT6) >> 13) & 0x1) +#define PORT_P0_IRNCFG_EXINT6_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT6) | (((val) & 0x1) << 13)) +/* EXINT5 configured for Edge or Level Detection (12) */ +#define PORT_P0_IRNCFG_EXINT5 (0x1 << 12) +#define PORT_P0_IRNCFG_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNCFG_EXINT5_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT5) >> 12) & 0x1) +#define PORT_P0_IRNCFG_EXINT5_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT5) | (((val) & 0x1) << 12)) +/* EXINT4 configured for Edge or Level Detection (11) */ +#define PORT_P0_IRNCFG_EXINT4 (0x1 << 11) +#define PORT_P0_IRNCFG_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNCFG_EXINT4_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT4) >> 11) & 0x1) +#define PORT_P0_IRNCFG_EXINT4_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT4) | (((val) & 0x1) << 11)) +/* EXINT3 configured for Edge or Level Detection (10) */ +#define PORT_P0_IRNCFG_EXINT3 (0x1 << 10) +#define PORT_P0_IRNCFG_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNCFG_EXINT3_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT3) >> 10) & 0x1) +#define PORT_P0_IRNCFG_EXINT3_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT3) | (((val) & 0x1) << 10)) +/* EXINT2 configured for Edge or Level Detection (9) */ +#define PORT_P0_IRNCFG_EXINT2 (0x1 << 9) +#define PORT_P0_IRNCFG_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNCFG_EXINT2_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT2) >> 9) & 0x1) +#define PORT_P0_IRNCFG_EXINT2_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT2) | (((val) & 0x1) << 9)) +/* EXINT1 configured for Edge or Level Detection (8) */ +#define PORT_P0_IRNCFG_EXINT1 (0x1 << 8) +#define PORT_P0_IRNCFG_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNCFG_EXINT1_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT1) >> 8) & 0x1) +#define PORT_P0_IRNCFG_EXINT1_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT1) | (((val) & 0x1) << 8)) +/* EXINT0 configured for Edge or Level Detection (7) */ +#define PORT_P0_IRNCFG_EXINT0 (0x1 << 7) +#define PORT_P0_IRNCFG_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNCFG_EXINT0_GET(val) ((((val) & PORT_P0_IRNCFG_EXINT0) >> 7) & 0x1) +#define PORT_P0_IRNCFG_EXINT0_SET(reg,val) (reg) = ((reg & ~PORT_P0_IRNCFG_EXINT0) | (((val) & 0x1) << 7)) + +/******************************************************************************* + * P0_IRNENSET Register + ******************************************************************************/ + +/* Set Interrupt Node Enable Flag EXINT16 (19) */ +#define PORT_P0_IRNENSET_EXINT16 (0x1 << 19) +#define PORT_P0_IRNENSET_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNENSET_EXINT16_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT16) | (val) & 1) << 19) +/* Set Interrupt Node Enable Flag EXINT10 (17) */ +#define PORT_P0_IRNENSET_EXINT10 (0x1 << 17) +#define PORT_P0_IRNENSET_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNENSET_EXINT10_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT10) | (val) & 1) << 17) +/* Set Interrupt Node Enable Flag EXINT9 (16) */ +#define PORT_P0_IRNENSET_EXINT9 (0x1 << 16) +#define PORT_P0_IRNENSET_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNENSET_EXINT9_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT9) | (val) & 1) << 16) +/* Set Interrupt Node Enable Flag EXINT8 (15) */ +#define PORT_P0_IRNENSET_EXINT8 (0x1 << 15) +#define PORT_P0_IRNENSET_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNENSET_EXINT8_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT8) | (val) & 1) << 15) +/* Set Interrupt Node Enable Flag EXINT7 (14) */ +#define PORT_P0_IRNENSET_EXINT7 (0x1 << 14) +#define PORT_P0_IRNENSET_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNENSET_EXINT7_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT7) | (val) & 1) << 14) +/* Set Interrupt Node Enable Flag EXINT6 (13) */ +#define PORT_P0_IRNENSET_EXINT6 (0x1 << 13) +#define PORT_P0_IRNENSET_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNENSET_EXINT6_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT6) | (val) & 1) << 13) +/* Set Interrupt Node Enable Flag EXINT5 (12) */ +#define PORT_P0_IRNENSET_EXINT5 (0x1 << 12) +#define PORT_P0_IRNENSET_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNENSET_EXINT5_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT5) | (val) & 1) << 12) +/* Set Interrupt Node Enable Flag EXINT4 (11) */ +#define PORT_P0_IRNENSET_EXINT4 (0x1 << 11) +#define PORT_P0_IRNENSET_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNENSET_EXINT4_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT4) | (val) & 1) << 11) +/* Set Interrupt Node Enable Flag EXINT3 (10) */ +#define PORT_P0_IRNENSET_EXINT3 (0x1 << 10) +#define PORT_P0_IRNENSET_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNENSET_EXINT3_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT3) | (val) & 1) << 10) +/* Set Interrupt Node Enable Flag EXINT2 (9) */ +#define PORT_P0_IRNENSET_EXINT2 (0x1 << 9) +#define PORT_P0_IRNENSET_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNENSET_EXINT2_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT2) | (val) & 1) << 9) +/* Set Interrupt Node Enable Flag EXINT1 (8) */ +#define PORT_P0_IRNENSET_EXINT1 (0x1 << 8) +#define PORT_P0_IRNENSET_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNENSET_EXINT1_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT1) | (val) & 1) << 8) +/* Set Interrupt Node Enable Flag EXINT0 (7) */ +#define PORT_P0_IRNENSET_EXINT0 (0x1 << 7) +#define PORT_P0_IRNENSET_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNENSET_EXINT0_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENSET_EXINT0) | (val) & 1) << 7) + +/******************************************************************************* + * P0_IRNENCLR Register + ******************************************************************************/ + +/* Clear Interrupt Node Enable Flag EXINT16 (19) */ +#define PORT_P0_IRNENCLR_EXINT16 (0x1 << 19) +#define PORT_P0_IRNENCLR_EXINT16_VAL(val) (((val) & 0x1) << 19) +#define PORT_P0_IRNENCLR_EXINT16_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT16) | (val) & 1) << 19) +/* Clear Interrupt Node Enable Flag EXINT10 (17) */ +#define PORT_P0_IRNENCLR_EXINT10 (0x1 << 17) +#define PORT_P0_IRNENCLR_EXINT10_VAL(val) (((val) & 0x1) << 17) +#define PORT_P0_IRNENCLR_EXINT10_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT10) | (val) & 1) << 17) +/* Clear Interrupt Node Enable Flag EXINT9 (16) */ +#define PORT_P0_IRNENCLR_EXINT9 (0x1 << 16) +#define PORT_P0_IRNENCLR_EXINT9_VAL(val) (((val) & 0x1) << 16) +#define PORT_P0_IRNENCLR_EXINT9_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT9) | (val) & 1) << 16) +/* Clear Interrupt Node Enable Flag EXINT8 (15) */ +#define PORT_P0_IRNENCLR_EXINT8 (0x1 << 15) +#define PORT_P0_IRNENCLR_EXINT8_VAL(val) (((val) & 0x1) << 15) +#define PORT_P0_IRNENCLR_EXINT8_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT8) | (val) & 1) << 15) +/* Clear Interrupt Node Enable Flag EXINT7 (14) */ +#define PORT_P0_IRNENCLR_EXINT7 (0x1 << 14) +#define PORT_P0_IRNENCLR_EXINT7_VAL(val) (((val) & 0x1) << 14) +#define PORT_P0_IRNENCLR_EXINT7_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT7) | (val) & 1) << 14) +/* Clear Interrupt Node Enable Flag EXINT6 (13) */ +#define PORT_P0_IRNENCLR_EXINT6 (0x1 << 13) +#define PORT_P0_IRNENCLR_EXINT6_VAL(val) (((val) & 0x1) << 13) +#define PORT_P0_IRNENCLR_EXINT6_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT6) | (val) & 1) << 13) +/* Clear Interrupt Node Enable Flag EXINT5 (12) */ +#define PORT_P0_IRNENCLR_EXINT5 (0x1 << 12) +#define PORT_P0_IRNENCLR_EXINT5_VAL(val) (((val) & 0x1) << 12) +#define PORT_P0_IRNENCLR_EXINT5_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT5) | (val) & 1) << 12) +/* Clear Interrupt Node Enable Flag EXINT4 (11) */ +#define PORT_P0_IRNENCLR_EXINT4 (0x1 << 11) +#define PORT_P0_IRNENCLR_EXINT4_VAL(val) (((val) & 0x1) << 11) +#define PORT_P0_IRNENCLR_EXINT4_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT4) | (val) & 1) << 11) +/* Clear Interrupt Node Enable Flag EXINT3 (10) */ +#define PORT_P0_IRNENCLR_EXINT3 (0x1 << 10) +#define PORT_P0_IRNENCLR_EXINT3_VAL(val) (((val) & 0x1) << 10) +#define PORT_P0_IRNENCLR_EXINT3_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT3) | (val) & 1) << 10) +/* Clear Interrupt Node Enable Flag EXINT2 (9) */ +#define PORT_P0_IRNENCLR_EXINT2 (0x1 << 9) +#define PORT_P0_IRNENCLR_EXINT2_VAL(val) (((val) & 0x1) << 9) +#define PORT_P0_IRNENCLR_EXINT2_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT2) | (val) & 1) << 9) +/* Clear Interrupt Node Enable Flag EXINT1 (8) */ +#define PORT_P0_IRNENCLR_EXINT1 (0x1 << 8) +#define PORT_P0_IRNENCLR_EXINT1_VAL(val) (((val) & 0x1) << 8) +#define PORT_P0_IRNENCLR_EXINT1_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT1) | (val) & 1) << 8) +/* Clear Interrupt Node Enable Flag EXINT0 (7) */ +#define PORT_P0_IRNENCLR_EXINT0 (0x1 << 7) +#define PORT_P0_IRNENCLR_EXINT0_VAL(val) (((val) & 0x1) << 7) +#define PORT_P0_IRNENCLR_EXINT0_SET(reg,val) (reg) = (((reg & ~PORT_P0_IRNENCLR_EXINT0) | (val) & 1) << 7) + +/******************************************************************************* + * Port 1 Data Output Register + ******************************************************************************/ + +/* Port 1 Pin # Output Value (19) */ +#define PORT_P1_OUT_P19 (0x1 << 19) +#define PORT_P1_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_OUT_P19_GET(val) ((((val) & PORT_P1_OUT_P19) >> 19) & 0x1) +#define PORT_P1_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 1 Pin # Output Value (18) */ +#define PORT_P1_OUT_P18 (0x1 << 18) +#define PORT_P1_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_OUT_P18_GET(val) ((((val) & PORT_P1_OUT_P18) >> 18) & 0x1) +#define PORT_P1_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 1 Pin # Output Value (17) */ +#define PORT_P1_OUT_P17 (0x1 << 17) +#define PORT_P1_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_OUT_P17_GET(val) ((((val) & PORT_P1_OUT_P17) >> 17) & 0x1) +#define PORT_P1_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 1 Pin # Output Value (16) */ +#define PORT_P1_OUT_P16 (0x1 << 16) +#define PORT_P1_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_OUT_P16_GET(val) ((((val) & PORT_P1_OUT_P16) >> 16) & 0x1) +#define PORT_P1_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 1 Pin # Output Value (15) */ +#define PORT_P1_OUT_P15 (0x1 << 15) +#define PORT_P1_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_OUT_P15_GET(val) ((((val) & PORT_P1_OUT_P15) >> 15) & 0x1) +#define PORT_P1_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 1 Pin # Output Value (14) */ +#define PORT_P1_OUT_P14 (0x1 << 14) +#define PORT_P1_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_OUT_P14_GET(val) ((((val) & PORT_P1_OUT_P14) >> 14) & 0x1) +#define PORT_P1_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 1 Pin # Output Value (13) */ +#define PORT_P1_OUT_P13 (0x1 << 13) +#define PORT_P1_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_OUT_P13_GET(val) ((((val) & PORT_P1_OUT_P13) >> 13) & 0x1) +#define PORT_P1_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 1 Pin # Output Value (12) */ +#define PORT_P1_OUT_P12 (0x1 << 12) +#define PORT_P1_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_OUT_P12_GET(val) ((((val) & PORT_P1_OUT_P12) >> 12) & 0x1) +#define PORT_P1_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 1 Pin # Output Value (11) */ +#define PORT_P1_OUT_P11 (0x1 << 11) +#define PORT_P1_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_OUT_P11_GET(val) ((((val) & PORT_P1_OUT_P11) >> 11) & 0x1) +#define PORT_P1_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 1 Pin # Output Value (10) */ +#define PORT_P1_OUT_P10 (0x1 << 10) +#define PORT_P1_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_OUT_P10_GET(val) ((((val) & PORT_P1_OUT_P10) >> 10) & 0x1) +#define PORT_P1_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 1 Pin # Output Value (9) */ +#define PORT_P1_OUT_P9 (0x1 << 9) +#define PORT_P1_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_OUT_P9_GET(val) ((((val) & PORT_P1_OUT_P9) >> 9) & 0x1) +#define PORT_P1_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 1 Pin # Output Value (8) */ +#define PORT_P1_OUT_P8 (0x1 << 8) +#define PORT_P1_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_OUT_P8_GET(val) ((((val) & PORT_P1_OUT_P8) >> 8) & 0x1) +#define PORT_P1_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 1 Pin # Output Value (7) */ +#define PORT_P1_OUT_P7 (0x1 << 7) +#define PORT_P1_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_OUT_P7_GET(val) ((((val) & PORT_P1_OUT_P7) >> 7) & 0x1) +#define PORT_P1_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 1 Pin # Output Value (6) */ +#define PORT_P1_OUT_P6 (0x1 << 6) +#define PORT_P1_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_OUT_P6_GET(val) ((((val) & PORT_P1_OUT_P6) >> 6) & 0x1) +#define PORT_P1_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 1 Pin # Output Value (5) */ +#define PORT_P1_OUT_P5 (0x1 << 5) +#define PORT_P1_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_OUT_P5_GET(val) ((((val) & PORT_P1_OUT_P5) >> 5) & 0x1) +#define PORT_P1_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 1 Pin # Output Value (4) */ +#define PORT_P1_OUT_P4 (0x1 << 4) +#define PORT_P1_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_OUT_P4_GET(val) ((((val) & PORT_P1_OUT_P4) >> 4) & 0x1) +#define PORT_P1_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 1 Pin # Output Value (3) */ +#define PORT_P1_OUT_P3 (0x1 << 3) +#define PORT_P1_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_OUT_P3_GET(val) ((((val) & PORT_P1_OUT_P3) >> 3) & 0x1) +#define PORT_P1_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 1 Pin # Output Value (2) */ +#define PORT_P1_OUT_P2 (0x1 << 2) +#define PORT_P1_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_OUT_P2_GET(val) ((((val) & PORT_P1_OUT_P2) >> 2) & 0x1) +#define PORT_P1_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 1 Pin # Output Value (1) */ +#define PORT_P1_OUT_P1 (0x1 << 1) +#define PORT_P1_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_OUT_P1_GET(val) ((((val) & PORT_P1_OUT_P1) >> 1) & 0x1) +#define PORT_P1_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 1 Pin # Output Value (0) */ +#define PORT_P1_OUT_P0 (0x1) +#define PORT_P1_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_OUT_P0_GET(val) ((((val) & PORT_P1_OUT_P0) >> 0) & 0x1) +#define PORT_P1_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 1 Data Input Register + ******************************************************************************/ + +/* Port 1 Pin # Latched Input Value (19) */ +#define PORT_P1_IN_P19 (0x1 << 19) +#define PORT_P1_IN_P19_GET(val) ((((val) & PORT_P1_IN_P19) >> 19) & 0x1) +/* Port 1 Pin # Latched Input Value (18) */ +#define PORT_P1_IN_P18 (0x1 << 18) +#define PORT_P1_IN_P18_GET(val) ((((val) & PORT_P1_IN_P18) >> 18) & 0x1) +/* Port 1 Pin # Latched Input Value (17) */ +#define PORT_P1_IN_P17 (0x1 << 17) +#define PORT_P1_IN_P17_GET(val) ((((val) & PORT_P1_IN_P17) >> 17) & 0x1) +/* Port 1 Pin # Latched Input Value (16) */ +#define PORT_P1_IN_P16 (0x1 << 16) +#define PORT_P1_IN_P16_GET(val) ((((val) & PORT_P1_IN_P16) >> 16) & 0x1) +/* Port 1 Pin # Latched Input Value (15) */ +#define PORT_P1_IN_P15 (0x1 << 15) +#define PORT_P1_IN_P15_GET(val) ((((val) & PORT_P1_IN_P15) >> 15) & 0x1) +/* Port 1 Pin # Latched Input Value (14) */ +#define PORT_P1_IN_P14 (0x1 << 14) +#define PORT_P1_IN_P14_GET(val) ((((val) & PORT_P1_IN_P14) >> 14) & 0x1) +/* Port 1 Pin # Latched Input Value (13) */ +#define PORT_P1_IN_P13 (0x1 << 13) +#define PORT_P1_IN_P13_GET(val) ((((val) & PORT_P1_IN_P13) >> 13) & 0x1) +/* Port 1 Pin # Latched Input Value (12) */ +#define PORT_P1_IN_P12 (0x1 << 12) +#define PORT_P1_IN_P12_GET(val) ((((val) & PORT_P1_IN_P12) >> 12) & 0x1) +/* Port 1 Pin # Latched Input Value (11) */ +#define PORT_P1_IN_P11 (0x1 << 11) +#define PORT_P1_IN_P11_GET(val) ((((val) & PORT_P1_IN_P11) >> 11) & 0x1) +/* Port 1 Pin # Latched Input Value (10) */ +#define PORT_P1_IN_P10 (0x1 << 10) +#define PORT_P1_IN_P10_GET(val) ((((val) & PORT_P1_IN_P10) >> 10) & 0x1) +/* Port 1 Pin # Latched Input Value (9) */ +#define PORT_P1_IN_P9 (0x1 << 9) +#define PORT_P1_IN_P9_GET(val) ((((val) & PORT_P1_IN_P9) >> 9) & 0x1) +/* Port 1 Pin # Latched Input Value (8) */ +#define PORT_P1_IN_P8 (0x1 << 8) +#define PORT_P1_IN_P8_GET(val) ((((val) & PORT_P1_IN_P8) >> 8) & 0x1) +/* Port 1 Pin # Latched Input Value (7) */ +#define PORT_P1_IN_P7 (0x1 << 7) +#define PORT_P1_IN_P7_GET(val) ((((val) & PORT_P1_IN_P7) >> 7) & 0x1) +/* Port 1 Pin # Latched Input Value (6) */ +#define PORT_P1_IN_P6 (0x1 << 6) +#define PORT_P1_IN_P6_GET(val) ((((val) & PORT_P1_IN_P6) >> 6) & 0x1) +/* Port 1 Pin # Latched Input Value (5) */ +#define PORT_P1_IN_P5 (0x1 << 5) +#define PORT_P1_IN_P5_GET(val) ((((val) & PORT_P1_IN_P5) >> 5) & 0x1) +/* Port 1 Pin # Latched Input Value (4) */ +#define PORT_P1_IN_P4 (0x1 << 4) +#define PORT_P1_IN_P4_GET(val) ((((val) & PORT_P1_IN_P4) >> 4) & 0x1) +/* Port 1 Pin # Latched Input Value (3) */ +#define PORT_P1_IN_P3 (0x1 << 3) +#define PORT_P1_IN_P3_GET(val) ((((val) & PORT_P1_IN_P3) >> 3) & 0x1) +/* Port 1 Pin # Latched Input Value (2) */ +#define PORT_P1_IN_P2 (0x1 << 2) +#define PORT_P1_IN_P2_GET(val) ((((val) & PORT_P1_IN_P2) >> 2) & 0x1) +/* Port 1 Pin # Latched Input Value (1) */ +#define PORT_P1_IN_P1 (0x1 << 1) +#define PORT_P1_IN_P1_GET(val) ((((val) & PORT_P1_IN_P1) >> 1) & 0x1) +/* Port 1 Pin # Latched Input Value (0) */ +#define PORT_P1_IN_P0 (0x1) +#define PORT_P1_IN_P0_GET(val) ((((val) & PORT_P1_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 1 Direction Register + ******************************************************************************/ + +/* Port 1 Pin #Direction Control (19) */ +#define PORT_P1_DIR_P19 (0x1 << 19) +#define PORT_P1_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_DIR_P19_GET(val) ((((val) & PORT_P1_DIR_P19) >> 19) & 0x1) +#define PORT_P1_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 1 Pin #Direction Control (18) */ +#define PORT_P1_DIR_P18 (0x1 << 18) +#define PORT_P1_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_DIR_P18_GET(val) ((((val) & PORT_P1_DIR_P18) >> 18) & 0x1) +#define PORT_P1_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 1 Pin #Direction Control (17) */ +#define PORT_P1_DIR_P17 (0x1 << 17) +#define PORT_P1_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_DIR_P17_GET(val) ((((val) & PORT_P1_DIR_P17) >> 17) & 0x1) +#define PORT_P1_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 1 Pin #Direction Control (16) */ +#define PORT_P1_DIR_P16 (0x1 << 16) +#define PORT_P1_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_DIR_P16_GET(val) ((((val) & PORT_P1_DIR_P16) >> 16) & 0x1) +#define PORT_P1_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 1 Pin #Direction Control (15) */ +#define PORT_P1_DIR_P15 (0x1 << 15) +#define PORT_P1_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_DIR_P15_GET(val) ((((val) & PORT_P1_DIR_P15) >> 15) & 0x1) +#define PORT_P1_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 1 Pin #Direction Control (14) */ +#define PORT_P1_DIR_P14 (0x1 << 14) +#define PORT_P1_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_DIR_P14_GET(val) ((((val) & PORT_P1_DIR_P14) >> 14) & 0x1) +#define PORT_P1_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 1 Pin #Direction Control (13) */ +#define PORT_P1_DIR_P13 (0x1 << 13) +#define PORT_P1_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_DIR_P13_GET(val) ((((val) & PORT_P1_DIR_P13) >> 13) & 0x1) +#define PORT_P1_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 1 Pin #Direction Control (12) */ +#define PORT_P1_DIR_P12 (0x1 << 12) +#define PORT_P1_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_DIR_P12_GET(val) ((((val) & PORT_P1_DIR_P12) >> 12) & 0x1) +#define PORT_P1_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 1 Pin #Direction Control (11) */ +#define PORT_P1_DIR_P11 (0x1 << 11) +#define PORT_P1_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_DIR_P11_GET(val) ((((val) & PORT_P1_DIR_P11) >> 11) & 0x1) +#define PORT_P1_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 1 Pin #Direction Control (10) */ +#define PORT_P1_DIR_P10 (0x1 << 10) +#define PORT_P1_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_DIR_P10_GET(val) ((((val) & PORT_P1_DIR_P10) >> 10) & 0x1) +#define PORT_P1_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 1 Pin #Direction Control (9) */ +#define PORT_P1_DIR_P9 (0x1 << 9) +#define PORT_P1_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_DIR_P9_GET(val) ((((val) & PORT_P1_DIR_P9) >> 9) & 0x1) +#define PORT_P1_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 1 Pin #Direction Control (8) */ +#define PORT_P1_DIR_P8 (0x1 << 8) +#define PORT_P1_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_DIR_P8_GET(val) ((((val) & PORT_P1_DIR_P8) >> 8) & 0x1) +#define PORT_P1_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 1 Pin #Direction Control (7) */ +#define PORT_P1_DIR_P7 (0x1 << 7) +#define PORT_P1_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_DIR_P7_GET(val) ((((val) & PORT_P1_DIR_P7) >> 7) & 0x1) +#define PORT_P1_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 1 Pin #Direction Control (6) */ +#define PORT_P1_DIR_P6 (0x1 << 6) +#define PORT_P1_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_DIR_P6_GET(val) ((((val) & PORT_P1_DIR_P6) >> 6) & 0x1) +#define PORT_P1_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 1 Pin #Direction Control (5) */ +#define PORT_P1_DIR_P5 (0x1 << 5) +#define PORT_P1_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_DIR_P5_GET(val) ((((val) & PORT_P1_DIR_P5) >> 5) & 0x1) +#define PORT_P1_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 1 Pin #Direction Control (4) */ +#define PORT_P1_DIR_P4 (0x1 << 4) +#define PORT_P1_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_DIR_P4_GET(val) ((((val) & PORT_P1_DIR_P4) >> 4) & 0x1) +#define PORT_P1_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 1 Pin #Direction Control (3) */ +#define PORT_P1_DIR_P3 (0x1 << 3) +#define PORT_P1_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_DIR_P3_GET(val) ((((val) & PORT_P1_DIR_P3) >> 3) & 0x1) +#define PORT_P1_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 1 Pin #Direction Control (2) */ +#define PORT_P1_DIR_P2 (0x1 << 2) +#define PORT_P1_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_DIR_P2_GET(val) ((((val) & PORT_P1_DIR_P2) >> 2) & 0x1) +#define PORT_P1_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 1 Pin #Direction Control (1) */ +#define PORT_P1_DIR_P1 (0x1 << 1) +#define PORT_P1_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_DIR_P1_GET(val) ((((val) & PORT_P1_DIR_P1) >> 1) & 0x1) +#define PORT_P1_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 1 Pin #Direction Control (0) */ +#define PORT_P1_DIR_P0 (0x1) +#define PORT_P1_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_DIR_P0_GET(val) ((((val) & PORT_P1_DIR_P0) >> 0) & 0x1) +#define PORT_P1_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 1 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 1 Bit # (19) */ +#define PORT_P1_ALTSEL0_P19 (0x1 << 19) +#define PORT_P1_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_ALTSEL0_P19_GET(val) ((((val) & PORT_P1_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P1_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 1 Bit # (18) */ +#define PORT_P1_ALTSEL0_P18 (0x1 << 18) +#define PORT_P1_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_ALTSEL0_P18_GET(val) ((((val) & PORT_P1_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P1_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 1 Bit # (17) */ +#define PORT_P1_ALTSEL0_P17 (0x1 << 17) +#define PORT_P1_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_ALTSEL0_P17_GET(val) ((((val) & PORT_P1_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P1_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 1 Bit # (16) */ +#define PORT_P1_ALTSEL0_P16 (0x1 << 16) +#define PORT_P1_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_ALTSEL0_P16_GET(val) ((((val) & PORT_P1_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P1_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 1 Bit # (15) */ +#define PORT_P1_ALTSEL0_P15 (0x1 << 15) +#define PORT_P1_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_ALTSEL0_P15_GET(val) ((((val) & PORT_P1_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P1_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 1 Bit # (14) */ +#define PORT_P1_ALTSEL0_P14 (0x1 << 14) +#define PORT_P1_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_ALTSEL0_P14_GET(val) ((((val) & PORT_P1_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P1_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 1 Bit # (13) */ +#define PORT_P1_ALTSEL0_P13 (0x1 << 13) +#define PORT_P1_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_ALTSEL0_P13_GET(val) ((((val) & PORT_P1_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P1_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 1 Bit # (12) */ +#define PORT_P1_ALTSEL0_P12 (0x1 << 12) +#define PORT_P1_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_ALTSEL0_P12_GET(val) ((((val) & PORT_P1_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P1_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 1 Bit # (11) */ +#define PORT_P1_ALTSEL0_P11 (0x1 << 11) +#define PORT_P1_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_ALTSEL0_P11_GET(val) ((((val) & PORT_P1_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P1_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 1 Bit # (10) */ +#define PORT_P1_ALTSEL0_P10 (0x1 << 10) +#define PORT_P1_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_ALTSEL0_P10_GET(val) ((((val) & PORT_P1_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P1_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 1 Bit # (9) */ +#define PORT_P1_ALTSEL0_P9 (0x1 << 9) +#define PORT_P1_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_ALTSEL0_P9_GET(val) ((((val) & PORT_P1_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P1_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 1 Bit # (8) */ +#define PORT_P1_ALTSEL0_P8 (0x1 << 8) +#define PORT_P1_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_ALTSEL0_P8_GET(val) ((((val) & PORT_P1_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P1_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 1 Bit # (7) */ +#define PORT_P1_ALTSEL0_P7 (0x1 << 7) +#define PORT_P1_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_ALTSEL0_P7_GET(val) ((((val) & PORT_P1_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P1_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 1 Bit # (6) */ +#define PORT_P1_ALTSEL0_P6 (0x1 << 6) +#define PORT_P1_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_ALTSEL0_P6_GET(val) ((((val) & PORT_P1_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P1_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 1 Bit # (5) */ +#define PORT_P1_ALTSEL0_P5 (0x1 << 5) +#define PORT_P1_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_ALTSEL0_P5_GET(val) ((((val) & PORT_P1_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P1_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 1 Bit # (4) */ +#define PORT_P1_ALTSEL0_P4 (0x1 << 4) +#define PORT_P1_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_ALTSEL0_P4_GET(val) ((((val) & PORT_P1_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P1_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 1 Bit # (3) */ +#define PORT_P1_ALTSEL0_P3 (0x1 << 3) +#define PORT_P1_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_ALTSEL0_P3_GET(val) ((((val) & PORT_P1_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P1_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 1 Bit # (2) */ +#define PORT_P1_ALTSEL0_P2 (0x1 << 2) +#define PORT_P1_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_ALTSEL0_P2_GET(val) ((((val) & PORT_P1_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P1_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 1 Bit # (1) */ +#define PORT_P1_ALTSEL0_P1 (0x1 << 1) +#define PORT_P1_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_ALTSEL0_P1_GET(val) ((((val) & PORT_P1_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P1_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 1 Bit # (0) */ +#define PORT_P1_ALTSEL0_P0 (0x1) +#define PORT_P1_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_ALTSEL0_P0_GET(val) ((((val) & PORT_P1_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P1_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 1 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 1 Bit # (19) */ +#define PORT_P1_PUEN_P19 (0x1 << 19) +#define PORT_P1_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_PUEN_P19_GET(val) ((((val) & PORT_P1_PUEN_P19) >> 19) & 0x1) +#define PORT_P1_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 1 Bit # (18) */ +#define PORT_P1_PUEN_P18 (0x1 << 18) +#define PORT_P1_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_PUEN_P18_GET(val) ((((val) & PORT_P1_PUEN_P18) >> 18) & 0x1) +#define PORT_P1_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 1 Bit # (17) */ +#define PORT_P1_PUEN_P17 (0x1 << 17) +#define PORT_P1_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_PUEN_P17_GET(val) ((((val) & PORT_P1_PUEN_P17) >> 17) & 0x1) +#define PORT_P1_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 1 Bit # (16) */ +#define PORT_P1_PUEN_P16 (0x1 << 16) +#define PORT_P1_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_PUEN_P16_GET(val) ((((val) & PORT_P1_PUEN_P16) >> 16) & 0x1) +#define PORT_P1_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 1 Bit # (15) */ +#define PORT_P1_PUEN_P15 (0x1 << 15) +#define PORT_P1_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_PUEN_P15_GET(val) ((((val) & PORT_P1_PUEN_P15) >> 15) & 0x1) +#define PORT_P1_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 1 Bit # (14) */ +#define PORT_P1_PUEN_P14 (0x1 << 14) +#define PORT_P1_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P1_PUEN_P14_GET(val) ((((val) & PORT_P1_PUEN_P14) >> 14) & 0x1) +#define PORT_P1_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 1 Bit # (13) */ +#define PORT_P1_PUEN_P13 (0x1 << 13) +#define PORT_P1_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P1_PUEN_P13_GET(val) ((((val) & PORT_P1_PUEN_P13) >> 13) & 0x1) +#define PORT_P1_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 1 Bit # (12) */ +#define PORT_P1_PUEN_P12 (0x1 << 12) +#define PORT_P1_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P1_PUEN_P12_GET(val) ((((val) & PORT_P1_PUEN_P12) >> 12) & 0x1) +#define PORT_P1_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 1 Bit # (11) */ +#define PORT_P1_PUEN_P11 (0x1 << 11) +#define PORT_P1_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P1_PUEN_P11_GET(val) ((((val) & PORT_P1_PUEN_P11) >> 11) & 0x1) +#define PORT_P1_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 1 Bit # (10) */ +#define PORT_P1_PUEN_P10 (0x1 << 10) +#define PORT_P1_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P1_PUEN_P10_GET(val) ((((val) & PORT_P1_PUEN_P10) >> 10) & 0x1) +#define PORT_P1_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 1 Bit # (9) */ +#define PORT_P1_PUEN_P9 (0x1 << 9) +#define PORT_P1_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P1_PUEN_P9_GET(val) ((((val) & PORT_P1_PUEN_P9) >> 9) & 0x1) +#define PORT_P1_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 1 Bit # (8) */ +#define PORT_P1_PUEN_P8 (0x1 << 8) +#define PORT_P1_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P1_PUEN_P8_GET(val) ((((val) & PORT_P1_PUEN_P8) >> 8) & 0x1) +#define PORT_P1_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 1 Bit # (7) */ +#define PORT_P1_PUEN_P7 (0x1 << 7) +#define PORT_P1_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P1_PUEN_P7_GET(val) ((((val) & PORT_P1_PUEN_P7) >> 7) & 0x1) +#define PORT_P1_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 1 Bit # (6) */ +#define PORT_P1_PUEN_P6 (0x1 << 6) +#define PORT_P1_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P1_PUEN_P6_GET(val) ((((val) & PORT_P1_PUEN_P6) >> 6) & 0x1) +#define PORT_P1_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 1 Bit # (5) */ +#define PORT_P1_PUEN_P5 (0x1 << 5) +#define PORT_P1_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P1_PUEN_P5_GET(val) ((((val) & PORT_P1_PUEN_P5) >> 5) & 0x1) +#define PORT_P1_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 1 Bit # (4) */ +#define PORT_P1_PUEN_P4 (0x1 << 4) +#define PORT_P1_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P1_PUEN_P4_GET(val) ((((val) & PORT_P1_PUEN_P4) >> 4) & 0x1) +#define PORT_P1_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 1 Bit # (3) */ +#define PORT_P1_PUEN_P3 (0x1 << 3) +#define PORT_P1_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P1_PUEN_P3_GET(val) ((((val) & PORT_P1_PUEN_P3) >> 3) & 0x1) +#define PORT_P1_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 1 Bit # (2) */ +#define PORT_P1_PUEN_P2 (0x1 << 2) +#define PORT_P1_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P1_PUEN_P2_GET(val) ((((val) & PORT_P1_PUEN_P2) >> 2) & 0x1) +#define PORT_P1_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 1 Bit # (1) */ +#define PORT_P1_PUEN_P1 (0x1 << 1) +#define PORT_P1_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P1_PUEN_P1_GET(val) ((((val) & PORT_P1_PUEN_P1) >> 1) & 0x1) +#define PORT_P1_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 1 Bit # (0) */ +#define PORT_P1_PUEN_P0 (0x1) +#define PORT_P1_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P1_PUEN_P0_GET(val) ((((val) & PORT_P1_PUEN_P0) >> 0) & 0x1) +#define PORT_P1_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P1_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * External Interrupt Control Register 0 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT15 (19) */ +#define PORT_P1_EXINTCR0_EXINT15 (0x1 << 19) +#define PORT_P1_EXINTCR0_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_EXINTCR0_EXINT15_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT15) >> 19) & 0x1) +#define PORT_P1_EXINTCR0_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT15) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT11 (18) */ +#define PORT_P1_EXINTCR0_EXINT11 (0x1 << 18) +#define PORT_P1_EXINTCR0_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_EXINTCR0_EXINT11_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT11) >> 18) & 0x1) +#define PORT_P1_EXINTCR0_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT11) | (((val) & 0x1) << 18)) +/* Type of Level or Edge Detection of EXINT12 (17) */ +#define PORT_P1_EXINTCR0_EXINT12 (0x1 << 17) +#define PORT_P1_EXINTCR0_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_EXINTCR0_EXINT12_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT12) >> 17) & 0x1) +#define PORT_P1_EXINTCR0_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT12) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT13 (16) */ +#define PORT_P1_EXINTCR0_EXINT13 (0x1 << 16) +#define PORT_P1_EXINTCR0_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_EXINTCR0_EXINT13_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT13) >> 16) & 0x1) +#define PORT_P1_EXINTCR0_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT13) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT14 (15) */ +#define PORT_P1_EXINTCR0_EXINT14 (0x1 << 15) +#define PORT_P1_EXINTCR0_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_EXINTCR0_EXINT14_GET(val) ((((val) & PORT_P1_EXINTCR0_EXINT14) >> 15) & 0x1) +#define PORT_P1_EXINTCR0_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR0_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * External Interrupt Control Register 1 + ******************************************************************************/ + +/* Type of Level or Edge Detection of EXINT15 (19) */ +#define PORT_P1_EXINTCR1_EXINT15 (0x1 << 19) +#define PORT_P1_EXINTCR1_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_EXINTCR1_EXINT15_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT15) >> 19) & 0x1) +#define PORT_P1_EXINTCR1_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT15) | (((val) & 0x1) << 19)) +/* Type of Level or Edge Detection of EXINT11 (18) */ +#define PORT_P1_EXINTCR1_EXINT11 (0x1 << 18) +#define PORT_P1_EXINTCR1_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_EXINTCR1_EXINT11_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT11) >> 18) & 0x1) +#define PORT_P1_EXINTCR1_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT11) | (((val) & 0x1) << 18)) +/* Type of Level or Edge Detection of EXINT12 (17) */ +#define PORT_P1_EXINTCR1_EXINT12 (0x1 << 17) +#define PORT_P1_EXINTCR1_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_EXINTCR1_EXINT12_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT12) >> 17) & 0x1) +#define PORT_P1_EXINTCR1_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT12) | (((val) & 0x1) << 17)) +/* Type of Level or Edge Detection of EXINT13 (16) */ +#define PORT_P1_EXINTCR1_EXINT13 (0x1 << 16) +#define PORT_P1_EXINTCR1_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_EXINTCR1_EXINT13_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT13) >> 16) & 0x1) +#define PORT_P1_EXINTCR1_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT13) | (((val) & 0x1) << 16)) +/* Type of Level or Edge Detection of EXINT14 (15) */ +#define PORT_P1_EXINTCR1_EXINT14 (0x1 << 15) +#define PORT_P1_EXINTCR1_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_EXINTCR1_EXINT14_GET(val) ((((val) & PORT_P1_EXINTCR1_EXINT14) >> 15) & 0x1) +#define PORT_P1_EXINTCR1_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_EXINTCR1_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * P1_IRNEN Register + ******************************************************************************/ + +/* EXINT15 Interrupt Request Enable (19) */ +#define PORT_P1_IRNEN_EXINT15 (0x1 << 19) +#define PORT_P1_IRNEN_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNEN_EXINT15_GET(val) ((((val) & PORT_P1_IRNEN_EXINT15) >> 19) & 0x1) +#define PORT_P1_IRNEN_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT15) | (((val) & 0x1) << 19)) +/* EXINT11 Interrupt Request Enable (18) */ +#define PORT_P1_IRNEN_EXINT11 (0x1 << 18) +#define PORT_P1_IRNEN_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNEN_EXINT11_GET(val) ((((val) & PORT_P1_IRNEN_EXINT11) >> 18) & 0x1) +#define PORT_P1_IRNEN_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT11) | (((val) & 0x1) << 18)) +/* EXINT12 Interrupt Request Enable (17) */ +#define PORT_P1_IRNEN_EXINT12 (0x1 << 17) +#define PORT_P1_IRNEN_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNEN_EXINT12_GET(val) ((((val) & PORT_P1_IRNEN_EXINT12) >> 17) & 0x1) +#define PORT_P1_IRNEN_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT12) | (((val) & 0x1) << 17)) +/* EXINT13 Interrupt Request Enable (16) */ +#define PORT_P1_IRNEN_EXINT13 (0x1 << 16) +#define PORT_P1_IRNEN_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNEN_EXINT13_GET(val) ((((val) & PORT_P1_IRNEN_EXINT13) >> 16) & 0x1) +#define PORT_P1_IRNEN_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT13) | (((val) & 0x1) << 16)) +/* EXINT14 Interrupt Request Enable (15) */ +#define PORT_P1_IRNEN_EXINT14 (0x1 << 15) +#define PORT_P1_IRNEN_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNEN_EXINT14_GET(val) ((((val) & PORT_P1_IRNEN_EXINT14) >> 15) & 0x1) +#define PORT_P1_IRNEN_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNEN_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * P1_IRNICR Register + ******************************************************************************/ + +/* EXINT15 Interrupt Request (19) */ +#define PORT_P1_IRNICR_EXINT15 (0x1 << 19) +#define PORT_P1_IRNICR_EXINT15_GET(val) ((((val) & PORT_P1_IRNICR_EXINT15) >> 19) & 0x1) +/* EXINT11 Interrupt Request (18) */ +#define PORT_P1_IRNICR_EXINT11 (0x1 << 18) +#define PORT_P1_IRNICR_EXINT11_GET(val) ((((val) & PORT_P1_IRNICR_EXINT11) >> 18) & 0x1) +/* EXINT12 Interrupt Request (17) */ +#define PORT_P1_IRNICR_EXINT12 (0x1 << 17) +#define PORT_P1_IRNICR_EXINT12_GET(val) ((((val) & PORT_P1_IRNICR_EXINT12) >> 17) & 0x1) +/* EXINT13 Interrupt Request (16) */ +#define PORT_P1_IRNICR_EXINT13 (0x1 << 16) +#define PORT_P1_IRNICR_EXINT13_GET(val) ((((val) & PORT_P1_IRNICR_EXINT13) >> 16) & 0x1) +/* EXINT14 Interrupt Request (15) */ +#define PORT_P1_IRNICR_EXINT14 (0x1 << 15) +#define PORT_P1_IRNICR_EXINT14_GET(val) ((((val) & PORT_P1_IRNICR_EXINT14) >> 15) & 0x1) + +/******************************************************************************* + * P1_IRNCR Register + ******************************************************************************/ + +/* EXINT15 Interrupt Request (19) */ +#define PORT_P1_IRNCR_EXINT15 (0x1 << 19) +#define PORT_P1_IRNCR_EXINT15_GET(val) ((((val) & PORT_P1_IRNCR_EXINT15) >> 19) & 0x1) +/* EXINT11 Interrupt Request (18) */ +#define PORT_P1_IRNCR_EXINT11 (0x1 << 18) +#define PORT_P1_IRNCR_EXINT11_GET(val) ((((val) & PORT_P1_IRNCR_EXINT11) >> 18) & 0x1) +/* EXINT12 Interrupt Request (17) */ +#define PORT_P1_IRNCR_EXINT12 (0x1 << 17) +#define PORT_P1_IRNCR_EXINT12_GET(val) ((((val) & PORT_P1_IRNCR_EXINT12) >> 17) & 0x1) +/* EXINT13 Interrupt Request (16) */ +#define PORT_P1_IRNCR_EXINT13 (0x1 << 16) +#define PORT_P1_IRNCR_EXINT13_GET(val) ((((val) & PORT_P1_IRNCR_EXINT13) >> 16) & 0x1) +/* EXINT14 Interrupt Request (15) */ +#define PORT_P1_IRNCR_EXINT14 (0x1 << 15) +#define PORT_P1_IRNCR_EXINT14_GET(val) ((((val) & PORT_P1_IRNCR_EXINT14) >> 15) & 0x1) + +/******************************************************************************* + * P1 External Event Detection Configuration Register + ******************************************************************************/ + +/* EXINT15 configured for Edge or Level Detection (19) */ +#define PORT_P1_IRNCFG_EXINT15 (0x1 << 19) +#define PORT_P1_IRNCFG_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNCFG_EXINT15_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT15) >> 19) & 0x1) +#define PORT_P1_IRNCFG_EXINT15_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT15) | (((val) & 0x1) << 19)) +/* EXINT11 configured for Edge or Level Detection (18) */ +#define PORT_P1_IRNCFG_EXINT11 (0x1 << 18) +#define PORT_P1_IRNCFG_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNCFG_EXINT11_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT11) >> 18) & 0x1) +#define PORT_P1_IRNCFG_EXINT11_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT11) | (((val) & 0x1) << 18)) +/* EXINT12 configured for Edge or Level Detection (17) */ +#define PORT_P1_IRNCFG_EXINT12 (0x1 << 17) +#define PORT_P1_IRNCFG_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNCFG_EXINT12_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT12) >> 17) & 0x1) +#define PORT_P1_IRNCFG_EXINT12_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT12) | (((val) & 0x1) << 17)) +/* EXINT13 configured for Edge or Level Detection (16) */ +#define PORT_P1_IRNCFG_EXINT13 (0x1 << 16) +#define PORT_P1_IRNCFG_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNCFG_EXINT13_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT13) >> 16) & 0x1) +#define PORT_P1_IRNCFG_EXINT13_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT13) | (((val) & 0x1) << 16)) +/* EXINT14 configured for Edge or Level Detection (15) */ +#define PORT_P1_IRNCFG_EXINT14 (0x1 << 15) +#define PORT_P1_IRNCFG_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNCFG_EXINT14_GET(val) ((((val) & PORT_P1_IRNCFG_EXINT14) >> 15) & 0x1) +#define PORT_P1_IRNCFG_EXINT14_SET(reg,val) (reg) = ((reg & ~PORT_P1_IRNCFG_EXINT14) | (((val) & 0x1) << 15)) + +/******************************************************************************* + * P1_IRNENSET Register + ******************************************************************************/ + +/* Set Interrupt Node Enable Flag EXINT15 (19) */ +#define PORT_P1_IRNENSET_EXINT15 (0x1 << 19) +#define PORT_P1_IRNENSET_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNENSET_EXINT15_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT15) | (val) & 1) << 19) +/* Set Interrupt Node Enable Flag EXINT11 (18) */ +#define PORT_P1_IRNENSET_EXINT11 (0x1 << 18) +#define PORT_P1_IRNENSET_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNENSET_EXINT11_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT11) | (val) & 1) << 18) +/* Set Interrupt Node Enable Flag EXINT12 (17) */ +#define PORT_P1_IRNENSET_EXINT12 (0x1 << 17) +#define PORT_P1_IRNENSET_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNENSET_EXINT12_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT12) | (val) & 1) << 17) +/* Set Interrupt Node Enable Flag EXINT13 (16) */ +#define PORT_P1_IRNENSET_EXINT13 (0x1 << 16) +#define PORT_P1_IRNENSET_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNENSET_EXINT13_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT13) | (val) & 1) << 16) +/* Set Interrupt Node Enable Flag EXINT14 (15) */ +#define PORT_P1_IRNENSET_EXINT14 (0x1 << 15) +#define PORT_P1_IRNENSET_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNENSET_EXINT14_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENSET_EXINT14) | (val) & 1) << 15) + +/******************************************************************************* + * P1_IRNENCLR Register + ******************************************************************************/ + +/* Clear Interrupt Node Enable Flag EXINT15 (19) */ +#define PORT_P1_IRNENCLR_EXINT15 (0x1 << 19) +#define PORT_P1_IRNENCLR_EXINT15_VAL(val) (((val) & 0x1) << 19) +#define PORT_P1_IRNENCLR_EXINT15_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT15) | (val) & 1) << 19) +/* Clear Interrupt Node Enable Flag EXINT11 (18) */ +#define PORT_P1_IRNENCLR_EXINT11 (0x1 << 18) +#define PORT_P1_IRNENCLR_EXINT11_VAL(val) (((val) & 0x1) << 18) +#define PORT_P1_IRNENCLR_EXINT11_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT11) | (val) & 1) << 18) +/* Clear Interrupt Node Enable Flag EXINT12 (17) */ +#define PORT_P1_IRNENCLR_EXINT12 (0x1 << 17) +#define PORT_P1_IRNENCLR_EXINT12_VAL(val) (((val) & 0x1) << 17) +#define PORT_P1_IRNENCLR_EXINT12_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT12) | (val) & 1) << 17) +/* Clear Interrupt Node Enable Flag EXINT13 (16) */ +#define PORT_P1_IRNENCLR_EXINT13 (0x1 << 16) +#define PORT_P1_IRNENCLR_EXINT13_VAL(val) (((val) & 0x1) << 16) +#define PORT_P1_IRNENCLR_EXINT13_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT13) | (val) & 1) << 16) +/* Clear Interrupt Node Enable Flag EXINT14 (15) */ +#define PORT_P1_IRNENCLR_EXINT14 (0x1 << 15) +#define PORT_P1_IRNENCLR_EXINT14_VAL(val) (((val) & 0x1) << 15) +#define PORT_P1_IRNENCLR_EXINT14_SET(reg,val) (reg) = (((reg & ~PORT_P1_IRNENCLR_EXINT14) | (val) & 1) << 15) + +/******************************************************************************* + * Port 2 Data Output Register + ******************************************************************************/ + +/* Port 2 Pin # Output Value (19) */ +#define PORT_P2_OUT_P19 (0x1 << 19) +#define PORT_P2_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_OUT_P19_GET(val) ((((val) & PORT_P2_OUT_P19) >> 19) & 0x1) +#define PORT_P2_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 2 Pin # Output Value (18) */ +#define PORT_P2_OUT_P18 (0x1 << 18) +#define PORT_P2_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_OUT_P18_GET(val) ((((val) & PORT_P2_OUT_P18) >> 18) & 0x1) +#define PORT_P2_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 2 Pin # Output Value (17) */ +#define PORT_P2_OUT_P17 (0x1 << 17) +#define PORT_P2_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_OUT_P17_GET(val) ((((val) & PORT_P2_OUT_P17) >> 17) & 0x1) +#define PORT_P2_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 2 Pin # Output Value (16) */ +#define PORT_P2_OUT_P16 (0x1 << 16) +#define PORT_P2_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_OUT_P16_GET(val) ((((val) & PORT_P2_OUT_P16) >> 16) & 0x1) +#define PORT_P2_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 2 Pin # Output Value (15) */ +#define PORT_P2_OUT_P15 (0x1 << 15) +#define PORT_P2_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_OUT_P15_GET(val) ((((val) & PORT_P2_OUT_P15) >> 15) & 0x1) +#define PORT_P2_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 2 Pin # Output Value (14) */ +#define PORT_P2_OUT_P14 (0x1 << 14) +#define PORT_P2_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_OUT_P14_GET(val) ((((val) & PORT_P2_OUT_P14) >> 14) & 0x1) +#define PORT_P2_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 2 Pin # Output Value (13) */ +#define PORT_P2_OUT_P13 (0x1 << 13) +#define PORT_P2_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_OUT_P13_GET(val) ((((val) & PORT_P2_OUT_P13) >> 13) & 0x1) +#define PORT_P2_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 2 Pin # Output Value (12) */ +#define PORT_P2_OUT_P12 (0x1 << 12) +#define PORT_P2_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_OUT_P12_GET(val) ((((val) & PORT_P2_OUT_P12) >> 12) & 0x1) +#define PORT_P2_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 2 Pin # Output Value (11) */ +#define PORT_P2_OUT_P11 (0x1 << 11) +#define PORT_P2_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_OUT_P11_GET(val) ((((val) & PORT_P2_OUT_P11) >> 11) & 0x1) +#define PORT_P2_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 2 Pin # Output Value (10) */ +#define PORT_P2_OUT_P10 (0x1 << 10) +#define PORT_P2_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_OUT_P10_GET(val) ((((val) & PORT_P2_OUT_P10) >> 10) & 0x1) +#define PORT_P2_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 2 Pin # Output Value (9) */ +#define PORT_P2_OUT_P9 (0x1 << 9) +#define PORT_P2_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_OUT_P9_GET(val) ((((val) & PORT_P2_OUT_P9) >> 9) & 0x1) +#define PORT_P2_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 2 Pin # Output Value (8) */ +#define PORT_P2_OUT_P8 (0x1 << 8) +#define PORT_P2_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_OUT_P8_GET(val) ((((val) & PORT_P2_OUT_P8) >> 8) & 0x1) +#define PORT_P2_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 2 Pin # Output Value (7) */ +#define PORT_P2_OUT_P7 (0x1 << 7) +#define PORT_P2_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_OUT_P7_GET(val) ((((val) & PORT_P2_OUT_P7) >> 7) & 0x1) +#define PORT_P2_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 2 Pin # Output Value (6) */ +#define PORT_P2_OUT_P6 (0x1 << 6) +#define PORT_P2_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_OUT_P6_GET(val) ((((val) & PORT_P2_OUT_P6) >> 6) & 0x1) +#define PORT_P2_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 2 Pin # Output Value (5) */ +#define PORT_P2_OUT_P5 (0x1 << 5) +#define PORT_P2_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_OUT_P5_GET(val) ((((val) & PORT_P2_OUT_P5) >> 5) & 0x1) +#define PORT_P2_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 2 Pin # Output Value (4) */ +#define PORT_P2_OUT_P4 (0x1 << 4) +#define PORT_P2_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_OUT_P4_GET(val) ((((val) & PORT_P2_OUT_P4) >> 4) & 0x1) +#define PORT_P2_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 2 Pin # Output Value (3) */ +#define PORT_P2_OUT_P3 (0x1 << 3) +#define PORT_P2_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_OUT_P3_GET(val) ((((val) & PORT_P2_OUT_P3) >> 3) & 0x1) +#define PORT_P2_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 2 Pin # Output Value (2) */ +#define PORT_P2_OUT_P2 (0x1 << 2) +#define PORT_P2_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_OUT_P2_GET(val) ((((val) & PORT_P2_OUT_P2) >> 2) & 0x1) +#define PORT_P2_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 2 Pin # Output Value (1) */ +#define PORT_P2_OUT_P1 (0x1 << 1) +#define PORT_P2_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_OUT_P1_GET(val) ((((val) & PORT_P2_OUT_P1) >> 1) & 0x1) +#define PORT_P2_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 2 Pin # Output Value (0) */ +#define PORT_P2_OUT_P0 (0x1) +#define PORT_P2_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_OUT_P0_GET(val) ((((val) & PORT_P2_OUT_P0) >> 0) & 0x1) +#define PORT_P2_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 2 Data Input Register + ******************************************************************************/ + +/* Port 2 Pin # Latched Input Value (19) */ +#define PORT_P2_IN_P19 (0x1 << 19) +#define PORT_P2_IN_P19_GET(val) ((((val) & PORT_P2_IN_P19) >> 19) & 0x1) +/* Port 2 Pin # Latched Input Value (18) */ +#define PORT_P2_IN_P18 (0x1 << 18) +#define PORT_P2_IN_P18_GET(val) ((((val) & PORT_P2_IN_P18) >> 18) & 0x1) +/* Port 2 Pin # Latched Input Value (17) */ +#define PORT_P2_IN_P17 (0x1 << 17) +#define PORT_P2_IN_P17_GET(val) ((((val) & PORT_P2_IN_P17) >> 17) & 0x1) +/* Port 2 Pin # Latched Input Value (16) */ +#define PORT_P2_IN_P16 (0x1 << 16) +#define PORT_P2_IN_P16_GET(val) ((((val) & PORT_P2_IN_P16) >> 16) & 0x1) +/* Port 2 Pin # Latched Input Value (15) */ +#define PORT_P2_IN_P15 (0x1 << 15) +#define PORT_P2_IN_P15_GET(val) ((((val) & PORT_P2_IN_P15) >> 15) & 0x1) +/* Port 2 Pin # Latched Input Value (14) */ +#define PORT_P2_IN_P14 (0x1 << 14) +#define PORT_P2_IN_P14_GET(val) ((((val) & PORT_P2_IN_P14) >> 14) & 0x1) +/* Port 2 Pin # Latched Input Value (13) */ +#define PORT_P2_IN_P13 (0x1 << 13) +#define PORT_P2_IN_P13_GET(val) ((((val) & PORT_P2_IN_P13) >> 13) & 0x1) +/* Port 2 Pin # Latched Input Value (12) */ +#define PORT_P2_IN_P12 (0x1 << 12) +#define PORT_P2_IN_P12_GET(val) ((((val) & PORT_P2_IN_P12) >> 12) & 0x1) +/* Port 2 Pin # Latched Input Value (11) */ +#define PORT_P2_IN_P11 (0x1 << 11) +#define PORT_P2_IN_P11_GET(val) ((((val) & PORT_P2_IN_P11) >> 11) & 0x1) +/* Port 2 Pin # Latched Input Value (10) */ +#define PORT_P2_IN_P10 (0x1 << 10) +#define PORT_P2_IN_P10_GET(val) ((((val) & PORT_P2_IN_P10) >> 10) & 0x1) +/* Port 2 Pin # Latched Input Value (9) */ +#define PORT_P2_IN_P9 (0x1 << 9) +#define PORT_P2_IN_P9_GET(val) ((((val) & PORT_P2_IN_P9) >> 9) & 0x1) +/* Port 2 Pin # Latched Input Value (8) */ +#define PORT_P2_IN_P8 (0x1 << 8) +#define PORT_P2_IN_P8_GET(val) ((((val) & PORT_P2_IN_P8) >> 8) & 0x1) +/* Port 2 Pin # Latched Input Value (7) */ +#define PORT_P2_IN_P7 (0x1 << 7) +#define PORT_P2_IN_P7_GET(val) ((((val) & PORT_P2_IN_P7) >> 7) & 0x1) +/* Port 2 Pin # Latched Input Value (6) */ +#define PORT_P2_IN_P6 (0x1 << 6) +#define PORT_P2_IN_P6_GET(val) ((((val) & PORT_P2_IN_P6) >> 6) & 0x1) +/* Port 2 Pin # Latched Input Value (5) */ +#define PORT_P2_IN_P5 (0x1 << 5) +#define PORT_P2_IN_P5_GET(val) ((((val) & PORT_P2_IN_P5) >> 5) & 0x1) +/* Port 2 Pin # Latched Input Value (4) */ +#define PORT_P2_IN_P4 (0x1 << 4) +#define PORT_P2_IN_P4_GET(val) ((((val) & PORT_P2_IN_P4) >> 4) & 0x1) +/* Port 2 Pin # Latched Input Value (3) */ +#define PORT_P2_IN_P3 (0x1 << 3) +#define PORT_P2_IN_P3_GET(val) ((((val) & PORT_P2_IN_P3) >> 3) & 0x1) +/* Port 2 Pin # Latched Input Value (2) */ +#define PORT_P2_IN_P2 (0x1 << 2) +#define PORT_P2_IN_P2_GET(val) ((((val) & PORT_P2_IN_P2) >> 2) & 0x1) +/* Port 2 Pin # Latched Input Value (1) */ +#define PORT_P2_IN_P1 (0x1 << 1) +#define PORT_P2_IN_P1_GET(val) ((((val) & PORT_P2_IN_P1) >> 1) & 0x1) +/* Port 2 Pin # Latched Input Value (0) */ +#define PORT_P2_IN_P0 (0x1) +#define PORT_P2_IN_P0_GET(val) ((((val) & PORT_P2_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 2 Direction Register + ******************************************************************************/ + +/* Port 2 Pin #Direction Control (19) */ +#define PORT_P2_DIR_P19 (0x1 << 19) +#define PORT_P2_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_DIR_P19_GET(val) ((((val) & PORT_P2_DIR_P19) >> 19) & 0x1) +#define PORT_P2_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 2 Pin #Direction Control (18) */ +#define PORT_P2_DIR_P18 (0x1 << 18) +#define PORT_P2_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_DIR_P18_GET(val) ((((val) & PORT_P2_DIR_P18) >> 18) & 0x1) +#define PORT_P2_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 2 Pin #Direction Control (17) */ +#define PORT_P2_DIR_P17 (0x1 << 17) +#define PORT_P2_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_DIR_P17_GET(val) ((((val) & PORT_P2_DIR_P17) >> 17) & 0x1) +#define PORT_P2_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 2 Pin #Direction Control (16) */ +#define PORT_P2_DIR_P16 (0x1 << 16) +#define PORT_P2_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_DIR_P16_GET(val) ((((val) & PORT_P2_DIR_P16) >> 16) & 0x1) +#define PORT_P2_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 2 Pin #Direction Control (15) */ +#define PORT_P2_DIR_P15 (0x1 << 15) +#define PORT_P2_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_DIR_P15_GET(val) ((((val) & PORT_P2_DIR_P15) >> 15) & 0x1) +#define PORT_P2_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 2 Pin #Direction Control (14) */ +#define PORT_P2_DIR_P14 (0x1 << 14) +#define PORT_P2_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_DIR_P14_GET(val) ((((val) & PORT_P2_DIR_P14) >> 14) & 0x1) +#define PORT_P2_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 2 Pin #Direction Control (13) */ +#define PORT_P2_DIR_P13 (0x1 << 13) +#define PORT_P2_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_DIR_P13_GET(val) ((((val) & PORT_P2_DIR_P13) >> 13) & 0x1) +#define PORT_P2_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 2 Pin #Direction Control (12) */ +#define PORT_P2_DIR_P12 (0x1 << 12) +#define PORT_P2_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_DIR_P12_GET(val) ((((val) & PORT_P2_DIR_P12) >> 12) & 0x1) +#define PORT_P2_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 2 Pin #Direction Control (11) */ +#define PORT_P2_DIR_P11 (0x1 << 11) +#define PORT_P2_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_DIR_P11_GET(val) ((((val) & PORT_P2_DIR_P11) >> 11) & 0x1) +#define PORT_P2_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 2 Pin #Direction Control (10) */ +#define PORT_P2_DIR_P10 (0x1 << 10) +#define PORT_P2_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_DIR_P10_GET(val) ((((val) & PORT_P2_DIR_P10) >> 10) & 0x1) +#define PORT_P2_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 2 Pin #Direction Control (9) */ +#define PORT_P2_DIR_P9 (0x1 << 9) +#define PORT_P2_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_DIR_P9_GET(val) ((((val) & PORT_P2_DIR_P9) >> 9) & 0x1) +#define PORT_P2_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 2 Pin #Direction Control (8) */ +#define PORT_P2_DIR_P8 (0x1 << 8) +#define PORT_P2_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_DIR_P8_GET(val) ((((val) & PORT_P2_DIR_P8) >> 8) & 0x1) +#define PORT_P2_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 2 Pin #Direction Control (7) */ +#define PORT_P2_DIR_P7 (0x1 << 7) +#define PORT_P2_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_DIR_P7_GET(val) ((((val) & PORT_P2_DIR_P7) >> 7) & 0x1) +#define PORT_P2_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 2 Pin #Direction Control (6) */ +#define PORT_P2_DIR_P6 (0x1 << 6) +#define PORT_P2_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_DIR_P6_GET(val) ((((val) & PORT_P2_DIR_P6) >> 6) & 0x1) +#define PORT_P2_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 2 Pin #Direction Control (5) */ +#define PORT_P2_DIR_P5 (0x1 << 5) +#define PORT_P2_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_DIR_P5_GET(val) ((((val) & PORT_P2_DIR_P5) >> 5) & 0x1) +#define PORT_P2_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 2 Pin #Direction Control (4) */ +#define PORT_P2_DIR_P4 (0x1 << 4) +#define PORT_P2_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_DIR_P4_GET(val) ((((val) & PORT_P2_DIR_P4) >> 4) & 0x1) +#define PORT_P2_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 2 Pin #Direction Control (3) */ +#define PORT_P2_DIR_P3 (0x1 << 3) +#define PORT_P2_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_DIR_P3_GET(val) ((((val) & PORT_P2_DIR_P3) >> 3) & 0x1) +#define PORT_P2_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 2 Pin #Direction Control (2) */ +#define PORT_P2_DIR_P2 (0x1 << 2) +#define PORT_P2_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_DIR_P2_GET(val) ((((val) & PORT_P2_DIR_P2) >> 2) & 0x1) +#define PORT_P2_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 2 Pin #Direction Control (1) */ +#define PORT_P2_DIR_P1 (0x1 << 1) +#define PORT_P2_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_DIR_P1_GET(val) ((((val) & PORT_P2_DIR_P1) >> 1) & 0x1) +#define PORT_P2_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 2 Pin #Direction Control (0) */ +#define PORT_P2_DIR_P0 (0x1) +#define PORT_P2_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_DIR_P0_GET(val) ((((val) & PORT_P2_DIR_P0) >> 0) & 0x1) +#define PORT_P2_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 2 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 2 Bit # (19) */ +#define PORT_P2_ALTSEL0_P19 (0x1 << 19) +#define PORT_P2_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_ALTSEL0_P19_GET(val) ((((val) & PORT_P2_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P2_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 2 Bit # (18) */ +#define PORT_P2_ALTSEL0_P18 (0x1 << 18) +#define PORT_P2_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_ALTSEL0_P18_GET(val) ((((val) & PORT_P2_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P2_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 2 Bit # (17) */ +#define PORT_P2_ALTSEL0_P17 (0x1 << 17) +#define PORT_P2_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_ALTSEL0_P17_GET(val) ((((val) & PORT_P2_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P2_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 2 Bit # (16) */ +#define PORT_P2_ALTSEL0_P16 (0x1 << 16) +#define PORT_P2_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_ALTSEL0_P16_GET(val) ((((val) & PORT_P2_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P2_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 2 Bit # (15) */ +#define PORT_P2_ALTSEL0_P15 (0x1 << 15) +#define PORT_P2_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_ALTSEL0_P15_GET(val) ((((val) & PORT_P2_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P2_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 2 Bit # (14) */ +#define PORT_P2_ALTSEL0_P14 (0x1 << 14) +#define PORT_P2_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_ALTSEL0_P14_GET(val) ((((val) & PORT_P2_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P2_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 2 Bit # (13) */ +#define PORT_P2_ALTSEL0_P13 (0x1 << 13) +#define PORT_P2_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_ALTSEL0_P13_GET(val) ((((val) & PORT_P2_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P2_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 2 Bit # (12) */ +#define PORT_P2_ALTSEL0_P12 (0x1 << 12) +#define PORT_P2_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_ALTSEL0_P12_GET(val) ((((val) & PORT_P2_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P2_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 2 Bit # (11) */ +#define PORT_P2_ALTSEL0_P11 (0x1 << 11) +#define PORT_P2_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_ALTSEL0_P11_GET(val) ((((val) & PORT_P2_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P2_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 2 Bit # (10) */ +#define PORT_P2_ALTSEL0_P10 (0x1 << 10) +#define PORT_P2_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_ALTSEL0_P10_GET(val) ((((val) & PORT_P2_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P2_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 2 Bit # (9) */ +#define PORT_P2_ALTSEL0_P9 (0x1 << 9) +#define PORT_P2_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_ALTSEL0_P9_GET(val) ((((val) & PORT_P2_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P2_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 2 Bit # (8) */ +#define PORT_P2_ALTSEL0_P8 (0x1 << 8) +#define PORT_P2_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_ALTSEL0_P8_GET(val) ((((val) & PORT_P2_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P2_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 2 Bit # (7) */ +#define PORT_P2_ALTSEL0_P7 (0x1 << 7) +#define PORT_P2_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_ALTSEL0_P7_GET(val) ((((val) & PORT_P2_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P2_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 2 Bit # (6) */ +#define PORT_P2_ALTSEL0_P6 (0x1 << 6) +#define PORT_P2_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_ALTSEL0_P6_GET(val) ((((val) & PORT_P2_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P2_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 2 Bit # (5) */ +#define PORT_P2_ALTSEL0_P5 (0x1 << 5) +#define PORT_P2_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_ALTSEL0_P5_GET(val) ((((val) & PORT_P2_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P2_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 2 Bit # (4) */ +#define PORT_P2_ALTSEL0_P4 (0x1 << 4) +#define PORT_P2_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_ALTSEL0_P4_GET(val) ((((val) & PORT_P2_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P2_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 2 Bit # (3) */ +#define PORT_P2_ALTSEL0_P3 (0x1 << 3) +#define PORT_P2_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_ALTSEL0_P3_GET(val) ((((val) & PORT_P2_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P2_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 2 Bit # (2) */ +#define PORT_P2_ALTSEL0_P2 (0x1 << 2) +#define PORT_P2_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_ALTSEL0_P2_GET(val) ((((val) & PORT_P2_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P2_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 2 Bit # (1) */ +#define PORT_P2_ALTSEL0_P1 (0x1 << 1) +#define PORT_P2_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_ALTSEL0_P1_GET(val) ((((val) & PORT_P2_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P2_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 2 Bit # (0) */ +#define PORT_P2_ALTSEL0_P0 (0x1) +#define PORT_P2_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_ALTSEL0_P0_GET(val) ((((val) & PORT_P2_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P2_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 2 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 2 Bit # (19) */ +#define PORT_P2_PUEN_P19 (0x1 << 19) +#define PORT_P2_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P2_PUEN_P19_GET(val) ((((val) & PORT_P2_PUEN_P19) >> 19) & 0x1) +#define PORT_P2_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 2 Bit # (18) */ +#define PORT_P2_PUEN_P18 (0x1 << 18) +#define PORT_P2_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P2_PUEN_P18_GET(val) ((((val) & PORT_P2_PUEN_P18) >> 18) & 0x1) +#define PORT_P2_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 2 Bit # (17) */ +#define PORT_P2_PUEN_P17 (0x1 << 17) +#define PORT_P2_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P2_PUEN_P17_GET(val) ((((val) & PORT_P2_PUEN_P17) >> 17) & 0x1) +#define PORT_P2_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 2 Bit # (16) */ +#define PORT_P2_PUEN_P16 (0x1 << 16) +#define PORT_P2_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P2_PUEN_P16_GET(val) ((((val) & PORT_P2_PUEN_P16) >> 16) & 0x1) +#define PORT_P2_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 2 Bit # (15) */ +#define PORT_P2_PUEN_P15 (0x1 << 15) +#define PORT_P2_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P2_PUEN_P15_GET(val) ((((val) & PORT_P2_PUEN_P15) >> 15) & 0x1) +#define PORT_P2_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 2 Bit # (14) */ +#define PORT_P2_PUEN_P14 (0x1 << 14) +#define PORT_P2_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P2_PUEN_P14_GET(val) ((((val) & PORT_P2_PUEN_P14) >> 14) & 0x1) +#define PORT_P2_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 2 Bit # (13) */ +#define PORT_P2_PUEN_P13 (0x1 << 13) +#define PORT_P2_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P2_PUEN_P13_GET(val) ((((val) & PORT_P2_PUEN_P13) >> 13) & 0x1) +#define PORT_P2_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 2 Bit # (12) */ +#define PORT_P2_PUEN_P12 (0x1 << 12) +#define PORT_P2_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P2_PUEN_P12_GET(val) ((((val) & PORT_P2_PUEN_P12) >> 12) & 0x1) +#define PORT_P2_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 2 Bit # (11) */ +#define PORT_P2_PUEN_P11 (0x1 << 11) +#define PORT_P2_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P2_PUEN_P11_GET(val) ((((val) & PORT_P2_PUEN_P11) >> 11) & 0x1) +#define PORT_P2_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 2 Bit # (10) */ +#define PORT_P2_PUEN_P10 (0x1 << 10) +#define PORT_P2_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P2_PUEN_P10_GET(val) ((((val) & PORT_P2_PUEN_P10) >> 10) & 0x1) +#define PORT_P2_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 2 Bit # (9) */ +#define PORT_P2_PUEN_P9 (0x1 << 9) +#define PORT_P2_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P2_PUEN_P9_GET(val) ((((val) & PORT_P2_PUEN_P9) >> 9) & 0x1) +#define PORT_P2_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 2 Bit # (8) */ +#define PORT_P2_PUEN_P8 (0x1 << 8) +#define PORT_P2_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P2_PUEN_P8_GET(val) ((((val) & PORT_P2_PUEN_P8) >> 8) & 0x1) +#define PORT_P2_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 2 Bit # (7) */ +#define PORT_P2_PUEN_P7 (0x1 << 7) +#define PORT_P2_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P2_PUEN_P7_GET(val) ((((val) & PORT_P2_PUEN_P7) >> 7) & 0x1) +#define PORT_P2_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 2 Bit # (6) */ +#define PORT_P2_PUEN_P6 (0x1 << 6) +#define PORT_P2_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P2_PUEN_P6_GET(val) ((((val) & PORT_P2_PUEN_P6) >> 6) & 0x1) +#define PORT_P2_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 2 Bit # (5) */ +#define PORT_P2_PUEN_P5 (0x1 << 5) +#define PORT_P2_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P2_PUEN_P5_GET(val) ((((val) & PORT_P2_PUEN_P5) >> 5) & 0x1) +#define PORT_P2_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 2 Bit # (4) */ +#define PORT_P2_PUEN_P4 (0x1 << 4) +#define PORT_P2_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P2_PUEN_P4_GET(val) ((((val) & PORT_P2_PUEN_P4) >> 4) & 0x1) +#define PORT_P2_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 2 Bit # (3) */ +#define PORT_P2_PUEN_P3 (0x1 << 3) +#define PORT_P2_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P2_PUEN_P3_GET(val) ((((val) & PORT_P2_PUEN_P3) >> 3) & 0x1) +#define PORT_P2_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 2 Bit # (2) */ +#define PORT_P2_PUEN_P2 (0x1 << 2) +#define PORT_P2_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P2_PUEN_P2_GET(val) ((((val) & PORT_P2_PUEN_P2) >> 2) & 0x1) +#define PORT_P2_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 2 Bit # (1) */ +#define PORT_P2_PUEN_P1 (0x1 << 1) +#define PORT_P2_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P2_PUEN_P1_GET(val) ((((val) & PORT_P2_PUEN_P1) >> 1) & 0x1) +#define PORT_P2_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 2 Bit # (0) */ +#define PORT_P2_PUEN_P0 (0x1) +#define PORT_P2_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P2_PUEN_P0_GET(val) ((((val) & PORT_P2_PUEN_P0) >> 0) & 0x1) +#define PORT_P2_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P2_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Data Output Register + ******************************************************************************/ + +/* Port 3 Pin # Output Value (19) */ +#define PORT_P3_OUT_P19 (0x1 << 19) +#define PORT_P3_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_OUT_P19_GET(val) ((((val) & PORT_P3_OUT_P19) >> 19) & 0x1) +#define PORT_P3_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 3 Pin # Output Value (18) */ +#define PORT_P3_OUT_P18 (0x1 << 18) +#define PORT_P3_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_OUT_P18_GET(val) ((((val) & PORT_P3_OUT_P18) >> 18) & 0x1) +#define PORT_P3_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 3 Pin # Output Value (17) */ +#define PORT_P3_OUT_P17 (0x1 << 17) +#define PORT_P3_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_OUT_P17_GET(val) ((((val) & PORT_P3_OUT_P17) >> 17) & 0x1) +#define PORT_P3_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 3 Pin # Output Value (16) */ +#define PORT_P3_OUT_P16 (0x1 << 16) +#define PORT_P3_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_OUT_P16_GET(val) ((((val) & PORT_P3_OUT_P16) >> 16) & 0x1) +#define PORT_P3_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 3 Pin # Output Value (15) */ +#define PORT_P3_OUT_P15 (0x1 << 15) +#define PORT_P3_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_OUT_P15_GET(val) ((((val) & PORT_P3_OUT_P15) >> 15) & 0x1) +#define PORT_P3_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 3 Pin # Output Value (14) */ +#define PORT_P3_OUT_P14 (0x1 << 14) +#define PORT_P3_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_OUT_P14_GET(val) ((((val) & PORT_P3_OUT_P14) >> 14) & 0x1) +#define PORT_P3_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 3 Pin # Output Value (13) */ +#define PORT_P3_OUT_P13 (0x1 << 13) +#define PORT_P3_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_OUT_P13_GET(val) ((((val) & PORT_P3_OUT_P13) >> 13) & 0x1) +#define PORT_P3_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 3 Pin # Output Value (12) */ +#define PORT_P3_OUT_P12 (0x1 << 12) +#define PORT_P3_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_OUT_P12_GET(val) ((((val) & PORT_P3_OUT_P12) >> 12) & 0x1) +#define PORT_P3_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 3 Pin # Output Value (11) */ +#define PORT_P3_OUT_P11 (0x1 << 11) +#define PORT_P3_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_OUT_P11_GET(val) ((((val) & PORT_P3_OUT_P11) >> 11) & 0x1) +#define PORT_P3_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 3 Pin # Output Value (10) */ +#define PORT_P3_OUT_P10 (0x1 << 10) +#define PORT_P3_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_OUT_P10_GET(val) ((((val) & PORT_P3_OUT_P10) >> 10) & 0x1) +#define PORT_P3_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 3 Pin # Output Value (9) */ +#define PORT_P3_OUT_P9 (0x1 << 9) +#define PORT_P3_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_OUT_P9_GET(val) ((((val) & PORT_P3_OUT_P9) >> 9) & 0x1) +#define PORT_P3_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 3 Pin # Output Value (8) */ +#define PORT_P3_OUT_P8 (0x1 << 8) +#define PORT_P3_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_OUT_P8_GET(val) ((((val) & PORT_P3_OUT_P8) >> 8) & 0x1) +#define PORT_P3_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 3 Pin # Output Value (7) */ +#define PORT_P3_OUT_P7 (0x1 << 7) +#define PORT_P3_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_OUT_P7_GET(val) ((((val) & PORT_P3_OUT_P7) >> 7) & 0x1) +#define PORT_P3_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 3 Pin # Output Value (6) */ +#define PORT_P3_OUT_P6 (0x1 << 6) +#define PORT_P3_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_OUT_P6_GET(val) ((((val) & PORT_P3_OUT_P6) >> 6) & 0x1) +#define PORT_P3_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 3 Pin # Output Value (5) */ +#define PORT_P3_OUT_P5 (0x1 << 5) +#define PORT_P3_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_OUT_P5_GET(val) ((((val) & PORT_P3_OUT_P5) >> 5) & 0x1) +#define PORT_P3_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 3 Pin # Output Value (4) */ +#define PORT_P3_OUT_P4 (0x1 << 4) +#define PORT_P3_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_OUT_P4_GET(val) ((((val) & PORT_P3_OUT_P4) >> 4) & 0x1) +#define PORT_P3_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 3 Pin # Output Value (3) */ +#define PORT_P3_OUT_P3 (0x1 << 3) +#define PORT_P3_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_OUT_P3_GET(val) ((((val) & PORT_P3_OUT_P3) >> 3) & 0x1) +#define PORT_P3_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 3 Pin # Output Value (2) */ +#define PORT_P3_OUT_P2 (0x1 << 2) +#define PORT_P3_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_OUT_P2_GET(val) ((((val) & PORT_P3_OUT_P2) >> 2) & 0x1) +#define PORT_P3_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 3 Pin # Output Value (1) */ +#define PORT_P3_OUT_P1 (0x1 << 1) +#define PORT_P3_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_OUT_P1_GET(val) ((((val) & PORT_P3_OUT_P1) >> 1) & 0x1) +#define PORT_P3_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 3 Pin # Output Value (0) */ +#define PORT_P3_OUT_P0 (0x1) +#define PORT_P3_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_OUT_P0_GET(val) ((((val) & PORT_P3_OUT_P0) >> 0) & 0x1) +#define PORT_P3_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Data Input Register + ******************************************************************************/ + +/* Port 3 Pin # Latched Input Value (19) */ +#define PORT_P3_IN_P19 (0x1 << 19) +#define PORT_P3_IN_P19_GET(val) ((((val) & PORT_P3_IN_P19) >> 19) & 0x1) +/* Port 3 Pin # Latched Input Value (18) */ +#define PORT_P3_IN_P18 (0x1 << 18) +#define PORT_P3_IN_P18_GET(val) ((((val) & PORT_P3_IN_P18) >> 18) & 0x1) +/* Port 3 Pin # Latched Input Value (17) */ +#define PORT_P3_IN_P17 (0x1 << 17) +#define PORT_P3_IN_P17_GET(val) ((((val) & PORT_P3_IN_P17) >> 17) & 0x1) +/* Port 3 Pin # Latched Input Value (16) */ +#define PORT_P3_IN_P16 (0x1 << 16) +#define PORT_P3_IN_P16_GET(val) ((((val) & PORT_P3_IN_P16) >> 16) & 0x1) +/* Port 3 Pin # Latched Input Value (15) */ +#define PORT_P3_IN_P15 (0x1 << 15) +#define PORT_P3_IN_P15_GET(val) ((((val) & PORT_P3_IN_P15) >> 15) & 0x1) +/* Port 3 Pin # Latched Input Value (14) */ +#define PORT_P3_IN_P14 (0x1 << 14) +#define PORT_P3_IN_P14_GET(val) ((((val) & PORT_P3_IN_P14) >> 14) & 0x1) +/* Port 3 Pin # Latched Input Value (13) */ +#define PORT_P3_IN_P13 (0x1 << 13) +#define PORT_P3_IN_P13_GET(val) ((((val) & PORT_P3_IN_P13) >> 13) & 0x1) +/* Port 3 Pin # Latched Input Value (12) */ +#define PORT_P3_IN_P12 (0x1 << 12) +#define PORT_P3_IN_P12_GET(val) ((((val) & PORT_P3_IN_P12) >> 12) & 0x1) +/* Port 3 Pin # Latched Input Value (11) */ +#define PORT_P3_IN_P11 (0x1 << 11) +#define PORT_P3_IN_P11_GET(val) ((((val) & PORT_P3_IN_P11) >> 11) & 0x1) +/* Port 3 Pin # Latched Input Value (10) */ +#define PORT_P3_IN_P10 (0x1 << 10) +#define PORT_P3_IN_P10_GET(val) ((((val) & PORT_P3_IN_P10) >> 10) & 0x1) +/* Port 3 Pin # Latched Input Value (9) */ +#define PORT_P3_IN_P9 (0x1 << 9) +#define PORT_P3_IN_P9_GET(val) ((((val) & PORT_P3_IN_P9) >> 9) & 0x1) +/* Port 3 Pin # Latched Input Value (8) */ +#define PORT_P3_IN_P8 (0x1 << 8) +#define PORT_P3_IN_P8_GET(val) ((((val) & PORT_P3_IN_P8) >> 8) & 0x1) +/* Port 3 Pin # Latched Input Value (7) */ +#define PORT_P3_IN_P7 (0x1 << 7) +#define PORT_P3_IN_P7_GET(val) ((((val) & PORT_P3_IN_P7) >> 7) & 0x1) +/* Port 3 Pin # Latched Input Value (6) */ +#define PORT_P3_IN_P6 (0x1 << 6) +#define PORT_P3_IN_P6_GET(val) ((((val) & PORT_P3_IN_P6) >> 6) & 0x1) +/* Port 3 Pin # Latched Input Value (5) */ +#define PORT_P3_IN_P5 (0x1 << 5) +#define PORT_P3_IN_P5_GET(val) ((((val) & PORT_P3_IN_P5) >> 5) & 0x1) +/* Port 3 Pin # Latched Input Value (4) */ +#define PORT_P3_IN_P4 (0x1 << 4) +#define PORT_P3_IN_P4_GET(val) ((((val) & PORT_P3_IN_P4) >> 4) & 0x1) +/* Port 3 Pin # Latched Input Value (3) */ +#define PORT_P3_IN_P3 (0x1 << 3) +#define PORT_P3_IN_P3_GET(val) ((((val) & PORT_P3_IN_P3) >> 3) & 0x1) +/* Port 3 Pin # Latched Input Value (2) */ +#define PORT_P3_IN_P2 (0x1 << 2) +#define PORT_P3_IN_P2_GET(val) ((((val) & PORT_P3_IN_P2) >> 2) & 0x1) +/* Port 3 Pin # Latched Input Value (1) */ +#define PORT_P3_IN_P1 (0x1 << 1) +#define PORT_P3_IN_P1_GET(val) ((((val) & PORT_P3_IN_P1) >> 1) & 0x1) +/* Port 3 Pin # Latched Input Value (0) */ +#define PORT_P3_IN_P0 (0x1) +#define PORT_P3_IN_P0_GET(val) ((((val) & PORT_P3_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 3 Direction Register + ******************************************************************************/ + +/* Port 3 Pin #Direction Control (19) */ +#define PORT_P3_DIR_P19 (0x1 << 19) +#define PORT_P3_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_DIR_P19_GET(val) ((((val) & PORT_P3_DIR_P19) >> 19) & 0x1) +#define PORT_P3_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 3 Pin #Direction Control (18) */ +#define PORT_P3_DIR_P18 (0x1 << 18) +#define PORT_P3_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_DIR_P18_GET(val) ((((val) & PORT_P3_DIR_P18) >> 18) & 0x1) +#define PORT_P3_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 3 Pin #Direction Control (17) */ +#define PORT_P3_DIR_P17 (0x1 << 17) +#define PORT_P3_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_DIR_P17_GET(val) ((((val) & PORT_P3_DIR_P17) >> 17) & 0x1) +#define PORT_P3_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 3 Pin #Direction Control (16) */ +#define PORT_P3_DIR_P16 (0x1 << 16) +#define PORT_P3_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_DIR_P16_GET(val) ((((val) & PORT_P3_DIR_P16) >> 16) & 0x1) +#define PORT_P3_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 3 Pin #Direction Control (15) */ +#define PORT_P3_DIR_P15 (0x1 << 15) +#define PORT_P3_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_DIR_P15_GET(val) ((((val) & PORT_P3_DIR_P15) >> 15) & 0x1) +#define PORT_P3_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 3 Pin #Direction Control (14) */ +#define PORT_P3_DIR_P14 (0x1 << 14) +#define PORT_P3_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_DIR_P14_GET(val) ((((val) & PORT_P3_DIR_P14) >> 14) & 0x1) +#define PORT_P3_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 3 Pin #Direction Control (13) */ +#define PORT_P3_DIR_P13 (0x1 << 13) +#define PORT_P3_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_DIR_P13_GET(val) ((((val) & PORT_P3_DIR_P13) >> 13) & 0x1) +#define PORT_P3_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 3 Pin #Direction Control (12) */ +#define PORT_P3_DIR_P12 (0x1 << 12) +#define PORT_P3_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_DIR_P12_GET(val) ((((val) & PORT_P3_DIR_P12) >> 12) & 0x1) +#define PORT_P3_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 3 Pin #Direction Control (11) */ +#define PORT_P3_DIR_P11 (0x1 << 11) +#define PORT_P3_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_DIR_P11_GET(val) ((((val) & PORT_P3_DIR_P11) >> 11) & 0x1) +#define PORT_P3_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 3 Pin #Direction Control (10) */ +#define PORT_P3_DIR_P10 (0x1 << 10) +#define PORT_P3_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_DIR_P10_GET(val) ((((val) & PORT_P3_DIR_P10) >> 10) & 0x1) +#define PORT_P3_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 3 Pin #Direction Control (9) */ +#define PORT_P3_DIR_P9 (0x1 << 9) +#define PORT_P3_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_DIR_P9_GET(val) ((((val) & PORT_P3_DIR_P9) >> 9) & 0x1) +#define PORT_P3_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 3 Pin #Direction Control (8) */ +#define PORT_P3_DIR_P8 (0x1 << 8) +#define PORT_P3_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_DIR_P8_GET(val) ((((val) & PORT_P3_DIR_P8) >> 8) & 0x1) +#define PORT_P3_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 3 Pin #Direction Control (7) */ +#define PORT_P3_DIR_P7 (0x1 << 7) +#define PORT_P3_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_DIR_P7_GET(val) ((((val) & PORT_P3_DIR_P7) >> 7) & 0x1) +#define PORT_P3_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 3 Pin #Direction Control (6) */ +#define PORT_P3_DIR_P6 (0x1 << 6) +#define PORT_P3_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_DIR_P6_GET(val) ((((val) & PORT_P3_DIR_P6) >> 6) & 0x1) +#define PORT_P3_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 3 Pin #Direction Control (5) */ +#define PORT_P3_DIR_P5 (0x1 << 5) +#define PORT_P3_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_DIR_P5_GET(val) ((((val) & PORT_P3_DIR_P5) >> 5) & 0x1) +#define PORT_P3_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 3 Pin #Direction Control (4) */ +#define PORT_P3_DIR_P4 (0x1 << 4) +#define PORT_P3_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_DIR_P4_GET(val) ((((val) & PORT_P3_DIR_P4) >> 4) & 0x1) +#define PORT_P3_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 3 Pin #Direction Control (3) */ +#define PORT_P3_DIR_P3 (0x1 << 3) +#define PORT_P3_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_DIR_P3_GET(val) ((((val) & PORT_P3_DIR_P3) >> 3) & 0x1) +#define PORT_P3_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 3 Pin #Direction Control (2) */ +#define PORT_P3_DIR_P2 (0x1 << 2) +#define PORT_P3_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_DIR_P2_GET(val) ((((val) & PORT_P3_DIR_P2) >> 2) & 0x1) +#define PORT_P3_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 3 Pin #Direction Control (1) */ +#define PORT_P3_DIR_P1 (0x1 << 1) +#define PORT_P3_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_DIR_P1_GET(val) ((((val) & PORT_P3_DIR_P1) >> 1) & 0x1) +#define PORT_P3_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 3 Pin #Direction Control (0) */ +#define PORT_P3_DIR_P0 (0x1) +#define PORT_P3_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_DIR_P0_GET(val) ((((val) & PORT_P3_DIR_P0) >> 0) & 0x1) +#define PORT_P3_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 3 Bit # (19) */ +#define PORT_P3_ALTSEL0_P19 (0x1 << 19) +#define PORT_P3_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_ALTSEL0_P19_GET(val) ((((val) & PORT_P3_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P3_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 3 Bit # (18) */ +#define PORT_P3_ALTSEL0_P18 (0x1 << 18) +#define PORT_P3_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_ALTSEL0_P18_GET(val) ((((val) & PORT_P3_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P3_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 3 Bit # (17) */ +#define PORT_P3_ALTSEL0_P17 (0x1 << 17) +#define PORT_P3_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_ALTSEL0_P17_GET(val) ((((val) & PORT_P3_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P3_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 3 Bit # (16) */ +#define PORT_P3_ALTSEL0_P16 (0x1 << 16) +#define PORT_P3_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_ALTSEL0_P16_GET(val) ((((val) & PORT_P3_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P3_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 3 Bit # (15) */ +#define PORT_P3_ALTSEL0_P15 (0x1 << 15) +#define PORT_P3_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_ALTSEL0_P15_GET(val) ((((val) & PORT_P3_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P3_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 3 Bit # (14) */ +#define PORT_P3_ALTSEL0_P14 (0x1 << 14) +#define PORT_P3_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_ALTSEL0_P14_GET(val) ((((val) & PORT_P3_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P3_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 3 Bit # (13) */ +#define PORT_P3_ALTSEL0_P13 (0x1 << 13) +#define PORT_P3_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_ALTSEL0_P13_GET(val) ((((val) & PORT_P3_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P3_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 3 Bit # (12) */ +#define PORT_P3_ALTSEL0_P12 (0x1 << 12) +#define PORT_P3_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_ALTSEL0_P12_GET(val) ((((val) & PORT_P3_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P3_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 3 Bit # (11) */ +#define PORT_P3_ALTSEL0_P11 (0x1 << 11) +#define PORT_P3_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_ALTSEL0_P11_GET(val) ((((val) & PORT_P3_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P3_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 3 Bit # (10) */ +#define PORT_P3_ALTSEL0_P10 (0x1 << 10) +#define PORT_P3_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_ALTSEL0_P10_GET(val) ((((val) & PORT_P3_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P3_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 3 Bit # (9) */ +#define PORT_P3_ALTSEL0_P9 (0x1 << 9) +#define PORT_P3_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_ALTSEL0_P9_GET(val) ((((val) & PORT_P3_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P3_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 3 Bit # (8) */ +#define PORT_P3_ALTSEL0_P8 (0x1 << 8) +#define PORT_P3_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_ALTSEL0_P8_GET(val) ((((val) & PORT_P3_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P3_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 3 Bit # (7) */ +#define PORT_P3_ALTSEL0_P7 (0x1 << 7) +#define PORT_P3_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_ALTSEL0_P7_GET(val) ((((val) & PORT_P3_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P3_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 3 Bit # (6) */ +#define PORT_P3_ALTSEL0_P6 (0x1 << 6) +#define PORT_P3_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_ALTSEL0_P6_GET(val) ((((val) & PORT_P3_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P3_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 3 Bit # (5) */ +#define PORT_P3_ALTSEL0_P5 (0x1 << 5) +#define PORT_P3_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_ALTSEL0_P5_GET(val) ((((val) & PORT_P3_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P3_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 3 Bit # (4) */ +#define PORT_P3_ALTSEL0_P4 (0x1 << 4) +#define PORT_P3_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_ALTSEL0_P4_GET(val) ((((val) & PORT_P3_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P3_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 3 Bit # (3) */ +#define PORT_P3_ALTSEL0_P3 (0x1 << 3) +#define PORT_P3_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_ALTSEL0_P3_GET(val) ((((val) & PORT_P3_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P3_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 3 Bit # (2) */ +#define PORT_P3_ALTSEL0_P2 (0x1 << 2) +#define PORT_P3_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_ALTSEL0_P2_GET(val) ((((val) & PORT_P3_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P3_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 3 Bit # (1) */ +#define PORT_P3_ALTSEL0_P1 (0x1 << 1) +#define PORT_P3_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_ALTSEL0_P1_GET(val) ((((val) & PORT_P3_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P3_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 3 Bit # (0) */ +#define PORT_P3_ALTSEL0_P0 (0x1) +#define PORT_P3_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_ALTSEL0_P0_GET(val) ((((val) & PORT_P3_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P3_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 3 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 3 Bit # (19) */ +#define PORT_P3_PUEN_P19 (0x1 << 19) +#define PORT_P3_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P3_PUEN_P19_GET(val) ((((val) & PORT_P3_PUEN_P19) >> 19) & 0x1) +#define PORT_P3_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 3 Bit # (18) */ +#define PORT_P3_PUEN_P18 (0x1 << 18) +#define PORT_P3_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P3_PUEN_P18_GET(val) ((((val) & PORT_P3_PUEN_P18) >> 18) & 0x1) +#define PORT_P3_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 3 Bit # (17) */ +#define PORT_P3_PUEN_P17 (0x1 << 17) +#define PORT_P3_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P3_PUEN_P17_GET(val) ((((val) & PORT_P3_PUEN_P17) >> 17) & 0x1) +#define PORT_P3_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 3 Bit # (16) */ +#define PORT_P3_PUEN_P16 (0x1 << 16) +#define PORT_P3_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P3_PUEN_P16_GET(val) ((((val) & PORT_P3_PUEN_P16) >> 16) & 0x1) +#define PORT_P3_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 3 Bit # (15) */ +#define PORT_P3_PUEN_P15 (0x1 << 15) +#define PORT_P3_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P3_PUEN_P15_GET(val) ((((val) & PORT_P3_PUEN_P15) >> 15) & 0x1) +#define PORT_P3_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 3 Bit # (14) */ +#define PORT_P3_PUEN_P14 (0x1 << 14) +#define PORT_P3_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P3_PUEN_P14_GET(val) ((((val) & PORT_P3_PUEN_P14) >> 14) & 0x1) +#define PORT_P3_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 3 Bit # (13) */ +#define PORT_P3_PUEN_P13 (0x1 << 13) +#define PORT_P3_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P3_PUEN_P13_GET(val) ((((val) & PORT_P3_PUEN_P13) >> 13) & 0x1) +#define PORT_P3_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 3 Bit # (12) */ +#define PORT_P3_PUEN_P12 (0x1 << 12) +#define PORT_P3_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P3_PUEN_P12_GET(val) ((((val) & PORT_P3_PUEN_P12) >> 12) & 0x1) +#define PORT_P3_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 3 Bit # (11) */ +#define PORT_P3_PUEN_P11 (0x1 << 11) +#define PORT_P3_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P3_PUEN_P11_GET(val) ((((val) & PORT_P3_PUEN_P11) >> 11) & 0x1) +#define PORT_P3_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 3 Bit # (10) */ +#define PORT_P3_PUEN_P10 (0x1 << 10) +#define PORT_P3_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P3_PUEN_P10_GET(val) ((((val) & PORT_P3_PUEN_P10) >> 10) & 0x1) +#define PORT_P3_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 3 Bit # (9) */ +#define PORT_P3_PUEN_P9 (0x1 << 9) +#define PORT_P3_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P3_PUEN_P9_GET(val) ((((val) & PORT_P3_PUEN_P9) >> 9) & 0x1) +#define PORT_P3_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 3 Bit # (8) */ +#define PORT_P3_PUEN_P8 (0x1 << 8) +#define PORT_P3_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P3_PUEN_P8_GET(val) ((((val) & PORT_P3_PUEN_P8) >> 8) & 0x1) +#define PORT_P3_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 3 Bit # (7) */ +#define PORT_P3_PUEN_P7 (0x1 << 7) +#define PORT_P3_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P3_PUEN_P7_GET(val) ((((val) & PORT_P3_PUEN_P7) >> 7) & 0x1) +#define PORT_P3_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 3 Bit # (6) */ +#define PORT_P3_PUEN_P6 (0x1 << 6) +#define PORT_P3_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P3_PUEN_P6_GET(val) ((((val) & PORT_P3_PUEN_P6) >> 6) & 0x1) +#define PORT_P3_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 3 Bit # (5) */ +#define PORT_P3_PUEN_P5 (0x1 << 5) +#define PORT_P3_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P3_PUEN_P5_GET(val) ((((val) & PORT_P3_PUEN_P5) >> 5) & 0x1) +#define PORT_P3_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 3 Bit # (4) */ +#define PORT_P3_PUEN_P4 (0x1 << 4) +#define PORT_P3_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P3_PUEN_P4_GET(val) ((((val) & PORT_P3_PUEN_P4) >> 4) & 0x1) +#define PORT_P3_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 3 Bit # (3) */ +#define PORT_P3_PUEN_P3 (0x1 << 3) +#define PORT_P3_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P3_PUEN_P3_GET(val) ((((val) & PORT_P3_PUEN_P3) >> 3) & 0x1) +#define PORT_P3_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 3 Bit # (2) */ +#define PORT_P3_PUEN_P2 (0x1 << 2) +#define PORT_P3_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P3_PUEN_P2_GET(val) ((((val) & PORT_P3_PUEN_P2) >> 2) & 0x1) +#define PORT_P3_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 3 Bit # (1) */ +#define PORT_P3_PUEN_P1 (0x1 << 1) +#define PORT_P3_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P3_PUEN_P1_GET(val) ((((val) & PORT_P3_PUEN_P1) >> 1) & 0x1) +#define PORT_P3_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 3 Bit # (0) */ +#define PORT_P3_PUEN_P0 (0x1) +#define PORT_P3_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P3_PUEN_P0_GET(val) ((((val) & PORT_P3_PUEN_P0) >> 0) & 0x1) +#define PORT_P3_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P3_PUEN_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Data Output Register + ******************************************************************************/ + +/* Port 4 Pin # Output Value (23) */ +#define PORT_P4_OUT_P23 (0x1 << 23) +#define PORT_P4_OUT_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_OUT_P23_GET(val) ((((val) & PORT_P4_OUT_P23) >> 23) & 0x1) +#define PORT_P4_OUT_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P23) | (((val) & 0x1) << 23)) +/* Port 4 Pin # Output Value (22) */ +#define PORT_P4_OUT_P22 (0x1 << 22) +#define PORT_P4_OUT_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_OUT_P22_GET(val) ((((val) & PORT_P4_OUT_P22) >> 22) & 0x1) +#define PORT_P4_OUT_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P22) | (((val) & 0x1) << 22)) +/* Port 4 Pin # Output Value (21) */ +#define PORT_P4_OUT_P21 (0x1 << 21) +#define PORT_P4_OUT_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_OUT_P21_GET(val) ((((val) & PORT_P4_OUT_P21) >> 21) & 0x1) +#define PORT_P4_OUT_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P21) | (((val) & 0x1) << 21)) +/* Port 4 Pin # Output Value (20) */ +#define PORT_P4_OUT_P20 (0x1 << 20) +#define PORT_P4_OUT_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_OUT_P20_GET(val) ((((val) & PORT_P4_OUT_P20) >> 20) & 0x1) +#define PORT_P4_OUT_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P20) | (((val) & 0x1) << 20)) +/* Port 4 Pin # Output Value (19) */ +#define PORT_P4_OUT_P19 (0x1 << 19) +#define PORT_P4_OUT_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_OUT_P19_GET(val) ((((val) & PORT_P4_OUT_P19) >> 19) & 0x1) +#define PORT_P4_OUT_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P19) | (((val) & 0x1) << 19)) +/* Port 4 Pin # Output Value (18) */ +#define PORT_P4_OUT_P18 (0x1 << 18) +#define PORT_P4_OUT_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_OUT_P18_GET(val) ((((val) & PORT_P4_OUT_P18) >> 18) & 0x1) +#define PORT_P4_OUT_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P18) | (((val) & 0x1) << 18)) +/* Port 4 Pin # Output Value (17) */ +#define PORT_P4_OUT_P17 (0x1 << 17) +#define PORT_P4_OUT_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_OUT_P17_GET(val) ((((val) & PORT_P4_OUT_P17) >> 17) & 0x1) +#define PORT_P4_OUT_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P17) | (((val) & 0x1) << 17)) +/* Port 4 Pin # Output Value (16) */ +#define PORT_P4_OUT_P16 (0x1 << 16) +#define PORT_P4_OUT_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_OUT_P16_GET(val) ((((val) & PORT_P4_OUT_P16) >> 16) & 0x1) +#define PORT_P4_OUT_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P16) | (((val) & 0x1) << 16)) +/* Port 4 Pin # Output Value (15) */ +#define PORT_P4_OUT_P15 (0x1 << 15) +#define PORT_P4_OUT_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_OUT_P15_GET(val) ((((val) & PORT_P4_OUT_P15) >> 15) & 0x1) +#define PORT_P4_OUT_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P15) | (((val) & 0x1) << 15)) +/* Port 4 Pin # Output Value (14) */ +#define PORT_P4_OUT_P14 (0x1 << 14) +#define PORT_P4_OUT_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_OUT_P14_GET(val) ((((val) & PORT_P4_OUT_P14) >> 14) & 0x1) +#define PORT_P4_OUT_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P14) | (((val) & 0x1) << 14)) +/* Port 4 Pin # Output Value (13) */ +#define PORT_P4_OUT_P13 (0x1 << 13) +#define PORT_P4_OUT_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_OUT_P13_GET(val) ((((val) & PORT_P4_OUT_P13) >> 13) & 0x1) +#define PORT_P4_OUT_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P13) | (((val) & 0x1) << 13)) +/* Port 4 Pin # Output Value (12) */ +#define PORT_P4_OUT_P12 (0x1 << 12) +#define PORT_P4_OUT_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_OUT_P12_GET(val) ((((val) & PORT_P4_OUT_P12) >> 12) & 0x1) +#define PORT_P4_OUT_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P12) | (((val) & 0x1) << 12)) +/* Port 4 Pin # Output Value (11) */ +#define PORT_P4_OUT_P11 (0x1 << 11) +#define PORT_P4_OUT_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_OUT_P11_GET(val) ((((val) & PORT_P4_OUT_P11) >> 11) & 0x1) +#define PORT_P4_OUT_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P11) | (((val) & 0x1) << 11)) +/* Port 4 Pin # Output Value (10) */ +#define PORT_P4_OUT_P10 (0x1 << 10) +#define PORT_P4_OUT_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_OUT_P10_GET(val) ((((val) & PORT_P4_OUT_P10) >> 10) & 0x1) +#define PORT_P4_OUT_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P10) | (((val) & 0x1) << 10)) +/* Port 4 Pin # Output Value (9) */ +#define PORT_P4_OUT_P9 (0x1 << 9) +#define PORT_P4_OUT_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_OUT_P9_GET(val) ((((val) & PORT_P4_OUT_P9) >> 9) & 0x1) +#define PORT_P4_OUT_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P9) | (((val) & 0x1) << 9)) +/* Port 4 Pin # Output Value (8) */ +#define PORT_P4_OUT_P8 (0x1 << 8) +#define PORT_P4_OUT_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_OUT_P8_GET(val) ((((val) & PORT_P4_OUT_P8) >> 8) & 0x1) +#define PORT_P4_OUT_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P8) | (((val) & 0x1) << 8)) +/* Port 4 Pin # Output Value (7) */ +#define PORT_P4_OUT_P7 (0x1 << 7) +#define PORT_P4_OUT_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_OUT_P7_GET(val) ((((val) & PORT_P4_OUT_P7) >> 7) & 0x1) +#define PORT_P4_OUT_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P7) | (((val) & 0x1) << 7)) +/* Port 4 Pin # Output Value (6) */ +#define PORT_P4_OUT_P6 (0x1 << 6) +#define PORT_P4_OUT_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_OUT_P6_GET(val) ((((val) & PORT_P4_OUT_P6) >> 6) & 0x1) +#define PORT_P4_OUT_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P6) | (((val) & 0x1) << 6)) +/* Port 4 Pin # Output Value (5) */ +#define PORT_P4_OUT_P5 (0x1 << 5) +#define PORT_P4_OUT_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_OUT_P5_GET(val) ((((val) & PORT_P4_OUT_P5) >> 5) & 0x1) +#define PORT_P4_OUT_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P5) | (((val) & 0x1) << 5)) +/* Port 4 Pin # Output Value (4) */ +#define PORT_P4_OUT_P4 (0x1 << 4) +#define PORT_P4_OUT_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_OUT_P4_GET(val) ((((val) & PORT_P4_OUT_P4) >> 4) & 0x1) +#define PORT_P4_OUT_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P4) | (((val) & 0x1) << 4)) +/* Port 4 Pin # Output Value (3) */ +#define PORT_P4_OUT_P3 (0x1 << 3) +#define PORT_P4_OUT_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_OUT_P3_GET(val) ((((val) & PORT_P4_OUT_P3) >> 3) & 0x1) +#define PORT_P4_OUT_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P3) | (((val) & 0x1) << 3)) +/* Port 4 Pin # Output Value (2) */ +#define PORT_P4_OUT_P2 (0x1 << 2) +#define PORT_P4_OUT_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_OUT_P2_GET(val) ((((val) & PORT_P4_OUT_P2) >> 2) & 0x1) +#define PORT_P4_OUT_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P2) | (((val) & 0x1) << 2)) +/* Port 4 Pin # Output Value (1) */ +#define PORT_P4_OUT_P1 (0x1 << 1) +#define PORT_P4_OUT_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_OUT_P1_GET(val) ((((val) & PORT_P4_OUT_P1) >> 1) & 0x1) +#define PORT_P4_OUT_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P1) | (((val) & 0x1) << 1)) +/* Port 4 Pin # Output Value (0) */ +#define PORT_P4_OUT_P0 (0x1) +#define PORT_P4_OUT_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_OUT_P0_GET(val) ((((val) & PORT_P4_OUT_P0) >> 0) & 0x1) +#define PORT_P4_OUT_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_OUT_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Data Input Register + ******************************************************************************/ + +/* Port 4 Pin # Latched Input Value (23) */ +#define PORT_P4_IN_P23 (0x1 << 23) +#define PORT_P4_IN_P23_GET(val) ((((val) & PORT_P4_IN_P23) >> 23) & 0x1) +/* Port 4 Pin # Latched Input Value (22) */ +#define PORT_P4_IN_P22 (0x1 << 22) +#define PORT_P4_IN_P22_GET(val) ((((val) & PORT_P4_IN_P22) >> 22) & 0x1) +/* Port 4 Pin # Latched Input Value (21) */ +#define PORT_P4_IN_P21 (0x1 << 21) +#define PORT_P4_IN_P21_GET(val) ((((val) & PORT_P4_IN_P21) >> 21) & 0x1) +/* Port 4 Pin # Latched Input Value (20) */ +#define PORT_P4_IN_P20 (0x1 << 20) +#define PORT_P4_IN_P20_GET(val) ((((val) & PORT_P4_IN_P20) >> 20) & 0x1) +/* Port 4 Pin # Latched Input Value (19) */ +#define PORT_P4_IN_P19 (0x1 << 19) +#define PORT_P4_IN_P19_GET(val) ((((val) & PORT_P4_IN_P19) >> 19) & 0x1) +/* Port 4 Pin # Latched Input Value (18) */ +#define PORT_P4_IN_P18 (0x1 << 18) +#define PORT_P4_IN_P18_GET(val) ((((val) & PORT_P4_IN_P18) >> 18) & 0x1) +/* Port 4 Pin # Latched Input Value (17) */ +#define PORT_P4_IN_P17 (0x1 << 17) +#define PORT_P4_IN_P17_GET(val) ((((val) & PORT_P4_IN_P17) >> 17) & 0x1) +/* Port 4 Pin # Latched Input Value (16) */ +#define PORT_P4_IN_P16 (0x1 << 16) +#define PORT_P4_IN_P16_GET(val) ((((val) & PORT_P4_IN_P16) >> 16) & 0x1) +/* Port 4 Pin # Latched Input Value (15) */ +#define PORT_P4_IN_P15 (0x1 << 15) +#define PORT_P4_IN_P15_GET(val) ((((val) & PORT_P4_IN_P15) >> 15) & 0x1) +/* Port 4 Pin # Latched Input Value (14) */ +#define PORT_P4_IN_P14 (0x1 << 14) +#define PORT_P4_IN_P14_GET(val) ((((val) & PORT_P4_IN_P14) >> 14) & 0x1) +/* Port 4 Pin # Latched Input Value (13) */ +#define PORT_P4_IN_P13 (0x1 << 13) +#define PORT_P4_IN_P13_GET(val) ((((val) & PORT_P4_IN_P13) >> 13) & 0x1) +/* Port 4 Pin # Latched Input Value (12) */ +#define PORT_P4_IN_P12 (0x1 << 12) +#define PORT_P4_IN_P12_GET(val) ((((val) & PORT_P4_IN_P12) >> 12) & 0x1) +/* Port 4 Pin # Latched Input Value (11) */ +#define PORT_P4_IN_P11 (0x1 << 11) +#define PORT_P4_IN_P11_GET(val) ((((val) & PORT_P4_IN_P11) >> 11) & 0x1) +/* Port 4 Pin # Latched Input Value (10) */ +#define PORT_P4_IN_P10 (0x1 << 10) +#define PORT_P4_IN_P10_GET(val) ((((val) & PORT_P4_IN_P10) >> 10) & 0x1) +/* Port 4 Pin # Latched Input Value (9) */ +#define PORT_P4_IN_P9 (0x1 << 9) +#define PORT_P4_IN_P9_GET(val) ((((val) & PORT_P4_IN_P9) >> 9) & 0x1) +/* Port 4 Pin # Latched Input Value (8) */ +#define PORT_P4_IN_P8 (0x1 << 8) +#define PORT_P4_IN_P8_GET(val) ((((val) & PORT_P4_IN_P8) >> 8) & 0x1) +/* Port 4 Pin # Latched Input Value (7) */ +#define PORT_P4_IN_P7 (0x1 << 7) +#define PORT_P4_IN_P7_GET(val) ((((val) & PORT_P4_IN_P7) >> 7) & 0x1) +/* Port 4 Pin # Latched Input Value (6) */ +#define PORT_P4_IN_P6 (0x1 << 6) +#define PORT_P4_IN_P6_GET(val) ((((val) & PORT_P4_IN_P6) >> 6) & 0x1) +/* Port 4 Pin # Latched Input Value (5) */ +#define PORT_P4_IN_P5 (0x1 << 5) +#define PORT_P4_IN_P5_GET(val) ((((val) & PORT_P4_IN_P5) >> 5) & 0x1) +/* Port 4 Pin # Latched Input Value (4) */ +#define PORT_P4_IN_P4 (0x1 << 4) +#define PORT_P4_IN_P4_GET(val) ((((val) & PORT_P4_IN_P4) >> 4) & 0x1) +/* Port 4 Pin # Latched Input Value (3) */ +#define PORT_P4_IN_P3 (0x1 << 3) +#define PORT_P4_IN_P3_GET(val) ((((val) & PORT_P4_IN_P3) >> 3) & 0x1) +/* Port 4 Pin # Latched Input Value (2) */ +#define PORT_P4_IN_P2 (0x1 << 2) +#define PORT_P4_IN_P2_GET(val) ((((val) & PORT_P4_IN_P2) >> 2) & 0x1) +/* Port 4 Pin # Latched Input Value (1) */ +#define PORT_P4_IN_P1 (0x1 << 1) +#define PORT_P4_IN_P1_GET(val) ((((val) & PORT_P4_IN_P1) >> 1) & 0x1) +/* Port 4 Pin # Latched Input Value (0) */ +#define PORT_P4_IN_P0 (0x1) +#define PORT_P4_IN_P0_GET(val) ((((val) & PORT_P4_IN_P0) >> 0) & 0x1) + +/******************************************************************************* + * Port 4 Direction Register + ******************************************************************************/ + +/* Port 4 Pin #Direction Control (23) */ +#define PORT_P4_DIR_P23 (0x1 << 23) +#define PORT_P4_DIR_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_DIR_P23_GET(val) ((((val) & PORT_P4_DIR_P23) >> 23) & 0x1) +#define PORT_P4_DIR_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P23) | (((val) & 0x1) << 23)) +/* Port 4 Pin #Direction Control (22) */ +#define PORT_P4_DIR_P22 (0x1 << 22) +#define PORT_P4_DIR_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_DIR_P22_GET(val) ((((val) & PORT_P4_DIR_P22) >> 22) & 0x1) +#define PORT_P4_DIR_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P22) | (((val) & 0x1) << 22)) +/* Port 4 Pin #Direction Control (21) */ +#define PORT_P4_DIR_P21 (0x1 << 21) +#define PORT_P4_DIR_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_DIR_P21_GET(val) ((((val) & PORT_P4_DIR_P21) >> 21) & 0x1) +#define PORT_P4_DIR_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P21) | (((val) & 0x1) << 21)) +/* Port 4 Pin #Direction Control (20) */ +#define PORT_P4_DIR_P20 (0x1 << 20) +#define PORT_P4_DIR_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_DIR_P20_GET(val) ((((val) & PORT_P4_DIR_P20) >> 20) & 0x1) +#define PORT_P4_DIR_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P20) | (((val) & 0x1) << 20)) +/* Port 4 Pin #Direction Control (19) */ +#define PORT_P4_DIR_P19 (0x1 << 19) +#define PORT_P4_DIR_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_DIR_P19_GET(val) ((((val) & PORT_P4_DIR_P19) >> 19) & 0x1) +#define PORT_P4_DIR_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P19) | (((val) & 0x1) << 19)) +/* Port 4 Pin #Direction Control (18) */ +#define PORT_P4_DIR_P18 (0x1 << 18) +#define PORT_P4_DIR_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_DIR_P18_GET(val) ((((val) & PORT_P4_DIR_P18) >> 18) & 0x1) +#define PORT_P4_DIR_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P18) | (((val) & 0x1) << 18)) +/* Port 4 Pin #Direction Control (17) */ +#define PORT_P4_DIR_P17 (0x1 << 17) +#define PORT_P4_DIR_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_DIR_P17_GET(val) ((((val) & PORT_P4_DIR_P17) >> 17) & 0x1) +#define PORT_P4_DIR_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P17) | (((val) & 0x1) << 17)) +/* Port 4 Pin #Direction Control (16) */ +#define PORT_P4_DIR_P16 (0x1 << 16) +#define PORT_P4_DIR_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_DIR_P16_GET(val) ((((val) & PORT_P4_DIR_P16) >> 16) & 0x1) +#define PORT_P4_DIR_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P16) | (((val) & 0x1) << 16)) +/* Port 4 Pin #Direction Control (15) */ +#define PORT_P4_DIR_P15 (0x1 << 15) +#define PORT_P4_DIR_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_DIR_P15_GET(val) ((((val) & PORT_P4_DIR_P15) >> 15) & 0x1) +#define PORT_P4_DIR_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P15) | (((val) & 0x1) << 15)) +/* Port 4 Pin #Direction Control (14) */ +#define PORT_P4_DIR_P14 (0x1 << 14) +#define PORT_P4_DIR_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_DIR_P14_GET(val) ((((val) & PORT_P4_DIR_P14) >> 14) & 0x1) +#define PORT_P4_DIR_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P14) | (((val) & 0x1) << 14)) +/* Port 4 Pin #Direction Control (13) */ +#define PORT_P4_DIR_P13 (0x1 << 13) +#define PORT_P4_DIR_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_DIR_P13_GET(val) ((((val) & PORT_P4_DIR_P13) >> 13) & 0x1) +#define PORT_P4_DIR_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P13) | (((val) & 0x1) << 13)) +/* Port 4 Pin #Direction Control (12) */ +#define PORT_P4_DIR_P12 (0x1 << 12) +#define PORT_P4_DIR_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_DIR_P12_GET(val) ((((val) & PORT_P4_DIR_P12) >> 12) & 0x1) +#define PORT_P4_DIR_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P12) | (((val) & 0x1) << 12)) +/* Port 4 Pin #Direction Control (11) */ +#define PORT_P4_DIR_P11 (0x1 << 11) +#define PORT_P4_DIR_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_DIR_P11_GET(val) ((((val) & PORT_P4_DIR_P11) >> 11) & 0x1) +#define PORT_P4_DIR_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P11) | (((val) & 0x1) << 11)) +/* Port 4 Pin #Direction Control (10) */ +#define PORT_P4_DIR_P10 (0x1 << 10) +#define PORT_P4_DIR_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_DIR_P10_GET(val) ((((val) & PORT_P4_DIR_P10) >> 10) & 0x1) +#define PORT_P4_DIR_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P10) | (((val) & 0x1) << 10)) +/* Port 4 Pin #Direction Control (9) */ +#define PORT_P4_DIR_P9 (0x1 << 9) +#define PORT_P4_DIR_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_DIR_P9_GET(val) ((((val) & PORT_P4_DIR_P9) >> 9) & 0x1) +#define PORT_P4_DIR_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P9) | (((val) & 0x1) << 9)) +/* Port 4 Pin #Direction Control (8) */ +#define PORT_P4_DIR_P8 (0x1 << 8) +#define PORT_P4_DIR_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_DIR_P8_GET(val) ((((val) & PORT_P4_DIR_P8) >> 8) & 0x1) +#define PORT_P4_DIR_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P8) | (((val) & 0x1) << 8)) +/* Port 4 Pin #Direction Control (7) */ +#define PORT_P4_DIR_P7 (0x1 << 7) +#define PORT_P4_DIR_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_DIR_P7_GET(val) ((((val) & PORT_P4_DIR_P7) >> 7) & 0x1) +#define PORT_P4_DIR_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P7) | (((val) & 0x1) << 7)) +/* Port 4 Pin #Direction Control (6) */ +#define PORT_P4_DIR_P6 (0x1 << 6) +#define PORT_P4_DIR_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_DIR_P6_GET(val) ((((val) & PORT_P4_DIR_P6) >> 6) & 0x1) +#define PORT_P4_DIR_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P6) | (((val) & 0x1) << 6)) +/* Port 4 Pin #Direction Control (5) */ +#define PORT_P4_DIR_P5 (0x1 << 5) +#define PORT_P4_DIR_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_DIR_P5_GET(val) ((((val) & PORT_P4_DIR_P5) >> 5) & 0x1) +#define PORT_P4_DIR_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P5) | (((val) & 0x1) << 5)) +/* Port 4 Pin #Direction Control (4) */ +#define PORT_P4_DIR_P4 (0x1 << 4) +#define PORT_P4_DIR_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_DIR_P4_GET(val) ((((val) & PORT_P4_DIR_P4) >> 4) & 0x1) +#define PORT_P4_DIR_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P4) | (((val) & 0x1) << 4)) +/* Port 4 Pin #Direction Control (3) */ +#define PORT_P4_DIR_P3 (0x1 << 3) +#define PORT_P4_DIR_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_DIR_P3_GET(val) ((((val) & PORT_P4_DIR_P3) >> 3) & 0x1) +#define PORT_P4_DIR_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P3) | (((val) & 0x1) << 3)) +/* Port 4 Pin #Direction Control (2) */ +#define PORT_P4_DIR_P2 (0x1 << 2) +#define PORT_P4_DIR_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_DIR_P2_GET(val) ((((val) & PORT_P4_DIR_P2) >> 2) & 0x1) +#define PORT_P4_DIR_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P2) | (((val) & 0x1) << 2)) +/* Port 4 Pin #Direction Control (1) */ +#define PORT_P4_DIR_P1 (0x1 << 1) +#define PORT_P4_DIR_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_DIR_P1_GET(val) ((((val) & PORT_P4_DIR_P1) >> 1) & 0x1) +#define PORT_P4_DIR_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P1) | (((val) & 0x1) << 1)) +/* Port 4 Pin #Direction Control (0) */ +#define PORT_P4_DIR_P0 (0x1) +#define PORT_P4_DIR_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_DIR_P0_GET(val) ((((val) & PORT_P4_DIR_P0) >> 0) & 0x1) +#define PORT_P4_DIR_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_DIR_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Alternate Function Select Register 0 + ******************************************************************************/ + +/* Alternate Function at Port 4 Bit # (23) */ +#define PORT_P4_ALTSEL0_P23 (0x1 << 23) +#define PORT_P4_ALTSEL0_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_ALTSEL0_P23_GET(val) ((((val) & PORT_P4_ALTSEL0_P23) >> 23) & 0x1) +#define PORT_P4_ALTSEL0_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P23) | (((val) & 0x1) << 23)) +/* Alternate Function at Port 4 Bit # (22) */ +#define PORT_P4_ALTSEL0_P22 (0x1 << 22) +#define PORT_P4_ALTSEL0_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_ALTSEL0_P22_GET(val) ((((val) & PORT_P4_ALTSEL0_P22) >> 22) & 0x1) +#define PORT_P4_ALTSEL0_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P22) | (((val) & 0x1) << 22)) +/* Alternate Function at Port 4 Bit # (21) */ +#define PORT_P4_ALTSEL0_P21 (0x1 << 21) +#define PORT_P4_ALTSEL0_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_ALTSEL0_P21_GET(val) ((((val) & PORT_P4_ALTSEL0_P21) >> 21) & 0x1) +#define PORT_P4_ALTSEL0_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P21) | (((val) & 0x1) << 21)) +/* Alternate Function at Port 4 Bit # (20) */ +#define PORT_P4_ALTSEL0_P20 (0x1 << 20) +#define PORT_P4_ALTSEL0_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_ALTSEL0_P20_GET(val) ((((val) & PORT_P4_ALTSEL0_P20) >> 20) & 0x1) +#define PORT_P4_ALTSEL0_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P20) | (((val) & 0x1) << 20)) +/* Alternate Function at Port 4 Bit # (19) */ +#define PORT_P4_ALTSEL0_P19 (0x1 << 19) +#define PORT_P4_ALTSEL0_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_ALTSEL0_P19_GET(val) ((((val) & PORT_P4_ALTSEL0_P19) >> 19) & 0x1) +#define PORT_P4_ALTSEL0_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P19) | (((val) & 0x1) << 19)) +/* Alternate Function at Port 4 Bit # (18) */ +#define PORT_P4_ALTSEL0_P18 (0x1 << 18) +#define PORT_P4_ALTSEL0_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_ALTSEL0_P18_GET(val) ((((val) & PORT_P4_ALTSEL0_P18) >> 18) & 0x1) +#define PORT_P4_ALTSEL0_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P18) | (((val) & 0x1) << 18)) +/* Alternate Function at Port 4 Bit # (17) */ +#define PORT_P4_ALTSEL0_P17 (0x1 << 17) +#define PORT_P4_ALTSEL0_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_ALTSEL0_P17_GET(val) ((((val) & PORT_P4_ALTSEL0_P17) >> 17) & 0x1) +#define PORT_P4_ALTSEL0_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P17) | (((val) & 0x1) << 17)) +/* Alternate Function at Port 4 Bit # (16) */ +#define PORT_P4_ALTSEL0_P16 (0x1 << 16) +#define PORT_P4_ALTSEL0_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_ALTSEL0_P16_GET(val) ((((val) & PORT_P4_ALTSEL0_P16) >> 16) & 0x1) +#define PORT_P4_ALTSEL0_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P16) | (((val) & 0x1) << 16)) +/* Alternate Function at Port 4 Bit # (15) */ +#define PORT_P4_ALTSEL0_P15 (0x1 << 15) +#define PORT_P4_ALTSEL0_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_ALTSEL0_P15_GET(val) ((((val) & PORT_P4_ALTSEL0_P15) >> 15) & 0x1) +#define PORT_P4_ALTSEL0_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P15) | (((val) & 0x1) << 15)) +/* Alternate Function at Port 4 Bit # (14) */ +#define PORT_P4_ALTSEL0_P14 (0x1 << 14) +#define PORT_P4_ALTSEL0_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_ALTSEL0_P14_GET(val) ((((val) & PORT_P4_ALTSEL0_P14) >> 14) & 0x1) +#define PORT_P4_ALTSEL0_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P14) | (((val) & 0x1) << 14)) +/* Alternate Function at Port 4 Bit # (13) */ +#define PORT_P4_ALTSEL0_P13 (0x1 << 13) +#define PORT_P4_ALTSEL0_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_ALTSEL0_P13_GET(val) ((((val) & PORT_P4_ALTSEL0_P13) >> 13) & 0x1) +#define PORT_P4_ALTSEL0_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P13) | (((val) & 0x1) << 13)) +/* Alternate Function at Port 4 Bit # (12) */ +#define PORT_P4_ALTSEL0_P12 (0x1 << 12) +#define PORT_P4_ALTSEL0_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_ALTSEL0_P12_GET(val) ((((val) & PORT_P4_ALTSEL0_P12) >> 12) & 0x1) +#define PORT_P4_ALTSEL0_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P12) | (((val) & 0x1) << 12)) +/* Alternate Function at Port 4 Bit # (11) */ +#define PORT_P4_ALTSEL0_P11 (0x1 << 11) +#define PORT_P4_ALTSEL0_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_ALTSEL0_P11_GET(val) ((((val) & PORT_P4_ALTSEL0_P11) >> 11) & 0x1) +#define PORT_P4_ALTSEL0_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P11) | (((val) & 0x1) << 11)) +/* Alternate Function at Port 4 Bit # (10) */ +#define PORT_P4_ALTSEL0_P10 (0x1 << 10) +#define PORT_P4_ALTSEL0_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_ALTSEL0_P10_GET(val) ((((val) & PORT_P4_ALTSEL0_P10) >> 10) & 0x1) +#define PORT_P4_ALTSEL0_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P10) | (((val) & 0x1) << 10)) +/* Alternate Function at Port 4 Bit # (9) */ +#define PORT_P4_ALTSEL0_P9 (0x1 << 9) +#define PORT_P4_ALTSEL0_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_ALTSEL0_P9_GET(val) ((((val) & PORT_P4_ALTSEL0_P9) >> 9) & 0x1) +#define PORT_P4_ALTSEL0_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P9) | (((val) & 0x1) << 9)) +/* Alternate Function at Port 4 Bit # (8) */ +#define PORT_P4_ALTSEL0_P8 (0x1 << 8) +#define PORT_P4_ALTSEL0_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_ALTSEL0_P8_GET(val) ((((val) & PORT_P4_ALTSEL0_P8) >> 8) & 0x1) +#define PORT_P4_ALTSEL0_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P8) | (((val) & 0x1) << 8)) +/* Alternate Function at Port 4 Bit # (7) */ +#define PORT_P4_ALTSEL0_P7 (0x1 << 7) +#define PORT_P4_ALTSEL0_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_ALTSEL0_P7_GET(val) ((((val) & PORT_P4_ALTSEL0_P7) >> 7) & 0x1) +#define PORT_P4_ALTSEL0_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P7) | (((val) & 0x1) << 7)) +/* Alternate Function at Port 4 Bit # (6) */ +#define PORT_P4_ALTSEL0_P6 (0x1 << 6) +#define PORT_P4_ALTSEL0_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_ALTSEL0_P6_GET(val) ((((val) & PORT_P4_ALTSEL0_P6) >> 6) & 0x1) +#define PORT_P4_ALTSEL0_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P6) | (((val) & 0x1) << 6)) +/* Alternate Function at Port 4 Bit # (5) */ +#define PORT_P4_ALTSEL0_P5 (0x1 << 5) +#define PORT_P4_ALTSEL0_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_ALTSEL0_P5_GET(val) ((((val) & PORT_P4_ALTSEL0_P5) >> 5) & 0x1) +#define PORT_P4_ALTSEL0_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P5) | (((val) & 0x1) << 5)) +/* Alternate Function at Port 4 Bit # (4) */ +#define PORT_P4_ALTSEL0_P4 (0x1 << 4) +#define PORT_P4_ALTSEL0_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_ALTSEL0_P4_GET(val) ((((val) & PORT_P4_ALTSEL0_P4) >> 4) & 0x1) +#define PORT_P4_ALTSEL0_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P4) | (((val) & 0x1) << 4)) +/* Alternate Function at Port 4 Bit # (3) */ +#define PORT_P4_ALTSEL0_P3 (0x1 << 3) +#define PORT_P4_ALTSEL0_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_ALTSEL0_P3_GET(val) ((((val) & PORT_P4_ALTSEL0_P3) >> 3) & 0x1) +#define PORT_P4_ALTSEL0_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P3) | (((val) & 0x1) << 3)) +/* Alternate Function at Port 4 Bit # (2) */ +#define PORT_P4_ALTSEL0_P2 (0x1 << 2) +#define PORT_P4_ALTSEL0_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_ALTSEL0_P2_GET(val) ((((val) & PORT_P4_ALTSEL0_P2) >> 2) & 0x1) +#define PORT_P4_ALTSEL0_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P2) | (((val) & 0x1) << 2)) +/* Alternate Function at Port 4 Bit # (1) */ +#define PORT_P4_ALTSEL0_P1 (0x1 << 1) +#define PORT_P4_ALTSEL0_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_ALTSEL0_P1_GET(val) ((((val) & PORT_P4_ALTSEL0_P1) >> 1) & 0x1) +#define PORT_P4_ALTSEL0_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P1) | (((val) & 0x1) << 1)) +/* Alternate Function at Port 4 Bit # (0) */ +#define PORT_P4_ALTSEL0_P0 (0x1) +#define PORT_P4_ALTSEL0_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_ALTSEL0_P0_GET(val) ((((val) & PORT_P4_ALTSEL0_P0) >> 0) & 0x1) +#define PORT_P4_ALTSEL0_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_ALTSEL0_P0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * Port 4 Pull Up Device Enable Register + ******************************************************************************/ + +/* Pull Up Device Enable at Port 4 Bit # (23) */ +#define PORT_P4_PUEN_P23 (0x1 << 23) +#define PORT_P4_PUEN_P23_VAL(val) (((val) & 0x1) << 23) +#define PORT_P4_PUEN_P23_GET(val) ((((val) & PORT_P4_PUEN_P23) >> 23) & 0x1) +#define PORT_P4_PUEN_P23_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P23) | (((val) & 0x1) << 23)) +/* Pull Up Device Enable at Port 4 Bit # (22) */ +#define PORT_P4_PUEN_P22 (0x1 << 22) +#define PORT_P4_PUEN_P22_VAL(val) (((val) & 0x1) << 22) +#define PORT_P4_PUEN_P22_GET(val) ((((val) & PORT_P4_PUEN_P22) >> 22) & 0x1) +#define PORT_P4_PUEN_P22_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P22) | (((val) & 0x1) << 22)) +/* Pull Up Device Enable at Port 4 Bit # (21) */ +#define PORT_P4_PUEN_P21 (0x1 << 21) +#define PORT_P4_PUEN_P21_VAL(val) (((val) & 0x1) << 21) +#define PORT_P4_PUEN_P21_GET(val) ((((val) & PORT_P4_PUEN_P21) >> 21) & 0x1) +#define PORT_P4_PUEN_P21_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P21) | (((val) & 0x1) << 21)) +/* Pull Up Device Enable at Port 4 Bit # (20) */ +#define PORT_P4_PUEN_P20 (0x1 << 20) +#define PORT_P4_PUEN_P20_VAL(val) (((val) & 0x1) << 20) +#define PORT_P4_PUEN_P20_GET(val) ((((val) & PORT_P4_PUEN_P20) >> 20) & 0x1) +#define PORT_P4_PUEN_P20_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P20) | (((val) & 0x1) << 20)) +/* Pull Up Device Enable at Port 4 Bit # (19) */ +#define PORT_P4_PUEN_P19 (0x1 << 19) +#define PORT_P4_PUEN_P19_VAL(val) (((val) & 0x1) << 19) +#define PORT_P4_PUEN_P19_GET(val) ((((val) & PORT_P4_PUEN_P19) >> 19) & 0x1) +#define PORT_P4_PUEN_P19_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P19) | (((val) & 0x1) << 19)) +/* Pull Up Device Enable at Port 4 Bit # (18) */ +#define PORT_P4_PUEN_P18 (0x1 << 18) +#define PORT_P4_PUEN_P18_VAL(val) (((val) & 0x1) << 18) +#define PORT_P4_PUEN_P18_GET(val) ((((val) & PORT_P4_PUEN_P18) >> 18) & 0x1) +#define PORT_P4_PUEN_P18_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P18) | (((val) & 0x1) << 18)) +/* Pull Up Device Enable at Port 4 Bit # (17) */ +#define PORT_P4_PUEN_P17 (0x1 << 17) +#define PORT_P4_PUEN_P17_VAL(val) (((val) & 0x1) << 17) +#define PORT_P4_PUEN_P17_GET(val) ((((val) & PORT_P4_PUEN_P17) >> 17) & 0x1) +#define PORT_P4_PUEN_P17_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P17) | (((val) & 0x1) << 17)) +/* Pull Up Device Enable at Port 4 Bit # (16) */ +#define PORT_P4_PUEN_P16 (0x1 << 16) +#define PORT_P4_PUEN_P16_VAL(val) (((val) & 0x1) << 16) +#define PORT_P4_PUEN_P16_GET(val) ((((val) & PORT_P4_PUEN_P16) >> 16) & 0x1) +#define PORT_P4_PUEN_P16_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P16) | (((val) & 0x1) << 16)) +/* Pull Up Device Enable at Port 4 Bit # (15) */ +#define PORT_P4_PUEN_P15 (0x1 << 15) +#define PORT_P4_PUEN_P15_VAL(val) (((val) & 0x1) << 15) +#define PORT_P4_PUEN_P15_GET(val) ((((val) & PORT_P4_PUEN_P15) >> 15) & 0x1) +#define PORT_P4_PUEN_P15_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P15) | (((val) & 0x1) << 15)) +/* Pull Up Device Enable at Port 4 Bit # (14) */ +#define PORT_P4_PUEN_P14 (0x1 << 14) +#define PORT_P4_PUEN_P14_VAL(val) (((val) & 0x1) << 14) +#define PORT_P4_PUEN_P14_GET(val) ((((val) & PORT_P4_PUEN_P14) >> 14) & 0x1) +#define PORT_P4_PUEN_P14_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P14) | (((val) & 0x1) << 14)) +/* Pull Up Device Enable at Port 4 Bit # (13) */ +#define PORT_P4_PUEN_P13 (0x1 << 13) +#define PORT_P4_PUEN_P13_VAL(val) (((val) & 0x1) << 13) +#define PORT_P4_PUEN_P13_GET(val) ((((val) & PORT_P4_PUEN_P13) >> 13) & 0x1) +#define PORT_P4_PUEN_P13_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P13) | (((val) & 0x1) << 13)) +/* Pull Up Device Enable at Port 4 Bit # (12) */ +#define PORT_P4_PUEN_P12 (0x1 << 12) +#define PORT_P4_PUEN_P12_VAL(val) (((val) & 0x1) << 12) +#define PORT_P4_PUEN_P12_GET(val) ((((val) & PORT_P4_PUEN_P12) >> 12) & 0x1) +#define PORT_P4_PUEN_P12_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P12) | (((val) & 0x1) << 12)) +/* Pull Up Device Enable at Port 4 Bit # (11) */ +#define PORT_P4_PUEN_P11 (0x1 << 11) +#define PORT_P4_PUEN_P11_VAL(val) (((val) & 0x1) << 11) +#define PORT_P4_PUEN_P11_GET(val) ((((val) & PORT_P4_PUEN_P11) >> 11) & 0x1) +#define PORT_P4_PUEN_P11_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P11) | (((val) & 0x1) << 11)) +/* Pull Up Device Enable at Port 4 Bit # (10) */ +#define PORT_P4_PUEN_P10 (0x1 << 10) +#define PORT_P4_PUEN_P10_VAL(val) (((val) & 0x1) << 10) +#define PORT_P4_PUEN_P10_GET(val) ((((val) & PORT_P4_PUEN_P10) >> 10) & 0x1) +#define PORT_P4_PUEN_P10_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P10) | (((val) & 0x1) << 10)) +/* Pull Up Device Enable at Port 4 Bit # (9) */ +#define PORT_P4_PUEN_P9 (0x1 << 9) +#define PORT_P4_PUEN_P9_VAL(val) (((val) & 0x1) << 9) +#define PORT_P4_PUEN_P9_GET(val) ((((val) & PORT_P4_PUEN_P9) >> 9) & 0x1) +#define PORT_P4_PUEN_P9_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P9) | (((val) & 0x1) << 9)) +/* Pull Up Device Enable at Port 4 Bit # (8) */ +#define PORT_P4_PUEN_P8 (0x1 << 8) +#define PORT_P4_PUEN_P8_VAL(val) (((val) & 0x1) << 8) +#define PORT_P4_PUEN_P8_GET(val) ((((val) & PORT_P4_PUEN_P8) >> 8) & 0x1) +#define PORT_P4_PUEN_P8_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P8) | (((val) & 0x1) << 8)) +/* Pull Up Device Enable at Port 4 Bit # (7) */ +#define PORT_P4_PUEN_P7 (0x1 << 7) +#define PORT_P4_PUEN_P7_VAL(val) (((val) & 0x1) << 7) +#define PORT_P4_PUEN_P7_GET(val) ((((val) & PORT_P4_PUEN_P7) >> 7) & 0x1) +#define PORT_P4_PUEN_P7_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P7) | (((val) & 0x1) << 7)) +/* Pull Up Device Enable at Port 4 Bit # (6) */ +#define PORT_P4_PUEN_P6 (0x1 << 6) +#define PORT_P4_PUEN_P6_VAL(val) (((val) & 0x1) << 6) +#define PORT_P4_PUEN_P6_GET(val) ((((val) & PORT_P4_PUEN_P6) >> 6) & 0x1) +#define PORT_P4_PUEN_P6_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P6) | (((val) & 0x1) << 6)) +/* Pull Up Device Enable at Port 4 Bit # (5) */ +#define PORT_P4_PUEN_P5 (0x1 << 5) +#define PORT_P4_PUEN_P5_VAL(val) (((val) & 0x1) << 5) +#define PORT_P4_PUEN_P5_GET(val) ((((val) & PORT_P4_PUEN_P5) >> 5) & 0x1) +#define PORT_P4_PUEN_P5_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P5) | (((val) & 0x1) << 5)) +/* Pull Up Device Enable at Port 4 Bit # (4) */ +#define PORT_P4_PUEN_P4 (0x1 << 4) +#define PORT_P4_PUEN_P4_VAL(val) (((val) & 0x1) << 4) +#define PORT_P4_PUEN_P4_GET(val) ((((val) & PORT_P4_PUEN_P4) >> 4) & 0x1) +#define PORT_P4_PUEN_P4_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P4) | (((val) & 0x1) << 4)) +/* Pull Up Device Enable at Port 4 Bit # (3) */ +#define PORT_P4_PUEN_P3 (0x1 << 3) +#define PORT_P4_PUEN_P3_VAL(val) (((val) & 0x1) << 3) +#define PORT_P4_PUEN_P3_GET(val) ((((val) & PORT_P4_PUEN_P3) >> 3) & 0x1) +#define PORT_P4_PUEN_P3_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P3) | (((val) & 0x1) << 3)) +/* Pull Up Device Enable at Port 4 Bit # (2) */ +#define PORT_P4_PUEN_P2 (0x1 << 2) +#define PORT_P4_PUEN_P2_VAL(val) (((val) & 0x1) << 2) +#define PORT_P4_PUEN_P2_GET(val) ((((val) & PORT_P4_PUEN_P2) >> 2) & 0x1) +#define PORT_P4_PUEN_P2_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P2) | (((val) & 0x1) << 2)) +/* Pull Up Device Enable at Port 4 Bit # (1) */ +#define PORT_P4_PUEN_P1 (0x1 << 1) +#define PORT_P4_PUEN_P1_VAL(val) (((val) & 0x1) << 1) +#define PORT_P4_PUEN_P1_GET(val) ((((val) & PORT_P4_PUEN_P1) >> 1) & 0x1) +#define PORT_P4_PUEN_P1_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P1) | (((val) & 0x1) << 1)) +/* Pull Up Device Enable at Port 4 Bit # (0) */ +#define PORT_P4_PUEN_P0 (0x1) +#define PORT_P4_PUEN_P0_VAL(val) (((val) & 0x1) << 0) +#define PORT_P4_PUEN_P0_GET(val) ((((val) & PORT_P4_PUEN_P0) >> 0) & 0x1) +#define PORT_P4_PUEN_P0_SET(reg,val) (reg) = ((reg & ~PORT_P4_PUEN_P0) | (((val) & 0x1) << 0)) + +#endif /* __PORT_H */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h new file mode 100644 index 0000000000..4ea2f5a685 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/ssc_reg.h @@ -0,0 +1,624 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SSC_REG_H +#define __SSC_REG_H + +/** SSC register structure */ +struct svip_reg_ssc { + volatile unsigned long clc; /* 0x00 */ + volatile unsigned long pisel; /* 0x04 */ + volatile unsigned long id; /* 0x08 */ + volatile unsigned long reserved0; /* 0x0c */ + volatile unsigned long mcon; /* 0x10 */ + volatile unsigned long state; /* 0x14 */ + volatile unsigned long whbstate; /* 0x18 */ + volatile unsigned long reserved1; /* 0x1c */ + volatile unsigned long tb; /* 0x20 */ + volatile unsigned long rb; /* 0x24 */ + volatile unsigned long reserved2[2]; /* 0x28 */ + volatile unsigned long rxfcon; /* 0x30 */ + volatile unsigned long txfcon; /* 0x34 */ + volatile unsigned long fstat; /* 0x38 */ + volatile unsigned long reserved3; /* 0x3c */ + volatile unsigned long br; /* 0x40 */ + volatile unsigned long brstat; /* 0x44 */ + volatile unsigned long reserved4[6]; /* 0x48 */ + volatile unsigned long sfcon; /* 0x60 */ + volatile unsigned long sfstat; /* 0x64 */ + volatile unsigned long reserved5[2]; /* 0x68 */ + volatile unsigned long gpocon; /* 0x70 */ + volatile unsigned long gpostat; /* 0x74 */ + volatile unsigned long whbgpostat; /* 0x78 */ + volatile unsigned long reserved6; /* 0x7c */ + volatile unsigned long rxreq; /* 0x80 */ + volatile unsigned long rxcnt; /* 0x84 */ + volatile unsigned long reserved7[25]; /* 0x88 */ + volatile unsigned long dma_con; /* 0xEC */ + volatile unsigned long reserved8; /* 0xf0 */ + volatile unsigned long irnen; /* 0xF4 */ + volatile unsigned long irncr; /* 0xF8 */ + volatile unsigned long irnicr; /* 0xFC */ +}; + +/******************************************************************************* + * CLC Register + ******************************************************************************/ + +/* Clock Divider for Sleep Mode (23:16) */ +#define SSC_CLC_SMC (0xff << 16) +#define SSC_CLC_SMC_VAL(val) (((val) & 0xff) << 16) +#define SSC_CLC_SMC_GET(val) ((((val) & SSC_CLC_SMC) >> 16) & 0xff) +#define SSC_CLC_SMC_SET(reg,val) (reg) = ((reg & ~SSC_CLC_SMC) | (((val) & 0xff) << 16)) +/* Clock Divider for Normal Run Mode (15:8) */ +#define SSC_CLC_RMC (0xff << 8) +#define SSC_CLC_RMC_VAL(val) (((val) & 0xff) << 8) +#define SSC_CLC_RMC_GET(val) ((((val) & SSC_CLC_RMC) >> 8) & 0xff) +#define SSC_CLC_RMC_SET(reg,val) (reg) = ((reg & ~SSC_CLC_RMC) | (((val) & 0xff) << 8)) +/* Fast Shut-Off Enable Bit (5) */ +#define SSC_CLC_FSOE (0x1 << 5) +#define SSC_CLC_FSOE_VAL(val) (((val) & 0x1) << 5) +#define SSC_CLC_FSOE_GET(val) ((((val) & SSC_CLC_FSOE) >> 5) & 0x1) +#define SSC_CLC_FSOE_SET(reg,val) (reg) = ((reg & ~SSC_CLC_FSOE) | (((val) & 0x1) << 5)) +/* Suspend Bit Write Enable for OCDS (4) */ +#define SSC_CLC_SBWE (0x1 << 4) +#define SSC_CLC_SBWE_VAL(val) (((val) & 0x1) << 4) +#define SSC_CLC_SBWE_SET(reg,val) (reg) = (((reg & ~SSC_CLC_SBWE) | (val) & 1) << 4) +/* External Request Disable (3) */ +#define SSC_CLC_EDIS (0x1 << 3) +#define SSC_CLC_EDIS_VAL(val) (((val) & 0x1) << 3) +#define SSC_CLC_EDIS_GET(val) ((((val) & SSC_CLC_EDIS) >> 3) & 0x1) +#define SSC_CLC_EDIS_SET(reg,val) (reg) = ((reg & ~SSC_CLC_EDIS) | (((val) & 0x1) << 3)) +/* Suspend Enable Bit for OCDS (2) */ +#define SSC_CLC_SPEN (0x1 << 2) +#define SSC_CLC_SPEN_VAL(val) (((val) & 0x1) << 2) +#define SSC_CLC_SPEN_GET(val) ((((val) & SSC_CLC_SPEN) >> 2) & 0x1) +#define SSC_CLC_SPEN_SET(reg,val) (reg) = ((reg & ~SSC_CLC_SPEN) | (((val) & 0x1) << 2)) +/* Disable Status Bit (1) */ +#define SSC_CLC_DISS (0x1 << 1) +#define SSC_CLC_DISS_GET(val) ((((val) & SSC_CLC_DISS) >> 1) & 0x1) +/* Disable Request Bit (0) */ +#define SSC_CLC_DISR (0x1) +#define SSC_CLC_DISR_VAL(val) (((val) & 0x1) << 0) +#define SSC_CLC_DISR_GET(val) ((((val) & SSC_CLC_DISR) >> 0) & 0x1) +#define SSC_CLC_DISR_SET(reg,val) (reg) = ((reg & ~SSC_CLC_DISR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * ID Register + ******************************************************************************/ + +/* Transmit FIFO Size (29:24) */ +#define SSC_ID_TXFS (0x3f << 24) +#define SSC_ID_TXFS_GET(val) ((((val) & SSC_ID_TXFS) >> 24) & 0x3f) +/* Receive FIFO Size (21:16) */ +#define SSC_ID_RXFS (0x3f << 16) +#define SSC_ID_RXFS_GET(val) ((((val) & SSC_ID_RXFS) >> 16) & 0x3f) +/* Module ID (15:8) */ +#define SSC_ID_ID (0xff << 8) +#define SSC_ID_ID_GET(val) ((((val) & SSC_ID_ID) >> 8) & 0xff) +/* Configuration (5) */ +#define SSC_ID_CFG (0x1 << 5) +#define SSC_ID_CFG_GET(val) ((((val) & SSC_ID_CFG) >> 5) & 0x1) +/* Revision (4:0) */ +#define SSC_ID_REV (0x1f) +#define SSC_ID_REV_GET(val) ((((val) & SSC_ID_REV) >> 0) & 0x1f) + +/******************************************************************************* + * MCON Register + ******************************************************************************/ + +/* Echo Mode (24) */ +#define SSC_MCON_EM (0x1 << 24) +#define SSC_MCON_EM_VAL(val) (((val) & 0x1) << 24) +#define SSC_MCON_EM_GET(val) ((((val) & SSC_MCON_EM) >> 24) & 0x1) +#define SSC_MCON_EM_SET(reg,val) (reg) = ((reg & ~SSC_MCON_EM) | (((val) & 0x1) << 24)) +/* Idle Bit Value (23) */ +#define SSC_MCON_IDLE (0x1 << 23) +#define SSC_MCON_IDLE_VAL(val) (((val) & 0x1) << 23) +#define SSC_MCON_IDLE_GET(val) ((((val) & SSC_MCON_IDLE) >> 23) & 0x1) +#define SSC_MCON_IDLE_SET(reg,val) (reg) = ((reg & ~SSC_MCON_IDLE) | (((val) & 0x1) << 23)) +/* Enable Byte Valid Control (22) */ +#define SSC_MCON_ENBV (0x1 << 22) +#define SSC_MCON_ENBV_VAL(val) (((val) & 0x1) << 22) +#define SSC_MCON_ENBV_GET(val) ((((val) & SSC_MCON_ENBV) >> 22) & 0x1) +#define SSC_MCON_ENBV_SET(reg,val) (reg) = ((reg & ~SSC_MCON_ENBV) | (((val) & 0x1) << 22)) +/* Data Width Selection (20:16) */ +#define SSC_MCON_BM (0x1f << 16) +#define SSC_MCON_BM_VAL(val) (((val) & 0x1f) << 16) +#define SSC_MCON_BM_GET(val) ((((val) & SSC_MCON_BM) >> 16) & 0x1f) +#define SSC_MCON_BM_SET(reg,val) (reg) = ((reg & ~SSC_MCON_BM) | (((val) & 0x1f) << 16)) +/* Receive Underflow Error Enable (12) */ +#define SSC_MCON_RUEN (0x1 << 12) +#define SSC_MCON_RUEN_VAL(val) (((val) & 0x1) << 12) +#define SSC_MCON_RUEN_GET(val) ((((val) & SSC_MCON_RUEN) >> 12) & 0x1) +#define SSC_MCON_RUEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_RUEN) | (((val) & 0x1) << 12)) +/* Transmit Underflow Error Enable (11) */ +#define SSC_MCON_TUEN (0x1 << 11) +#define SSC_MCON_TUEN_VAL(val) (((val) & 0x1) << 11) +#define SSC_MCON_TUEN_GET(val) ((((val) & SSC_MCON_TUEN) >> 11) & 0x1) +#define SSC_MCON_TUEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TUEN) | (((val) & 0x1) << 11)) +/* Abort Error Enable (10) */ +#define SSC_MCON_AEN (0x1 << 10) +#define SSC_MCON_AEN_VAL(val) (((val) & 0x1) << 10) +#define SSC_MCON_AEN_GET(val) ((((val) & SSC_MCON_AEN) >> 10) & 0x1) +#define SSC_MCON_AEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_AEN) | (((val) & 0x1) << 10)) +/* Receive Overflow Error Enable (9) */ +#define SSC_MCON_REN (0x1 << 9) +#define SSC_MCON_REN_VAL(val) (((val) & 0x1) << 9) +#define SSC_MCON_REN_GET(val) ((((val) & SSC_MCON_REN) >> 9) & 0x1) +#define SSC_MCON_REN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_REN) | (((val) & 0x1) << 9)) +/* Transmit Overflow Error Enable (8) */ +#define SSC_MCON_TEN (0x1 << 8) +#define SSC_MCON_TEN_VAL(val) (((val) & 0x1) << 8) +#define SSC_MCON_TEN_GET(val) ((((val) & SSC_MCON_TEN) >> 8) & 0x1) +#define SSC_MCON_TEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TEN) | (((val) & 0x1) << 8)) +/* Loop Back Control (7) */ +#define SSC_MCON_LB (0x1 << 7) +#define SSC_MCON_LB_VAL(val) (((val) & 0x1) << 7) +#define SSC_MCON_LB_GET(val) ((((val) & SSC_MCON_LB) >> 7) & 0x1) +#define SSC_MCON_LB_SET(reg,val) (reg) = ((reg & ~SSC_MCON_LB) | (((val) & 0x1) << 7)) +/* Clock Polarity Control (6) */ +#define SSC_MCON_PO (0x1 << 6) +#define SSC_MCON_PO_VAL(val) (((val) & 0x1) << 6) +#define SSC_MCON_PO_GET(val) ((((val) & SSC_MCON_PO) >> 6) & 0x1) +#define SSC_MCON_PO_SET(reg,val) (reg) = ((reg & ~SSC_MCON_PO) | (((val) & 0x1) << 6)) +/* Clock Phase Control (5) */ +#define SSC_MCON_PH (0x1 << 5) +#define SSC_MCON_PH_VAL(val) (((val) & 0x1) << 5) +#define SSC_MCON_PH_GET(val) ((((val) & SSC_MCON_PH) >> 5) & 0x1) +#define SSC_MCON_PH_SET(reg,val) (reg) = ((reg & ~SSC_MCON_PH) | (((val) & 0x1) << 5)) +/* Heading Control (4) */ +#define SSC_MCON_HB (0x1 << 4) +#define SSC_MCON_HB_VAL(val) (((val) & 0x1) << 4) +#define SSC_MCON_HB_GET(val) ((((val) & SSC_MCON_HB) >> 4) & 0x1) +#define SSC_MCON_HB_SET(reg,val) (reg) = ((reg & ~SSC_MCON_HB) | (((val) & 0x1) << 4)) +/* Chip Select Enable (3) */ +#define SSC_MCON_CSBEN (0x1 << 3) +#define SSC_MCON_CSBEN_VAL(val) (((val) & 0x1) << 3) +#define SSC_MCON_CSBEN_GET(val) ((((val) & SSC_MCON_CSBEN) >> 3) & 0x1) +#define SSC_MCON_CSBEN_SET(reg,val) (reg) = ((reg & ~SSC_MCON_CSBEN) | (((val) & 0x1) << 3)) +/* Chip Select Invert (2) */ +#define SSC_MCON_CSBINV (0x1 << 2) +#define SSC_MCON_CSBINV_VAL(val) (((val) & 0x1) << 2) +#define SSC_MCON_CSBINV_GET(val) ((((val) & SSC_MCON_CSBINV) >> 2) & 0x1) +#define SSC_MCON_CSBINV_SET(reg,val) (reg) = ((reg & ~SSC_MCON_CSBINV) | (((val) & 0x1) << 2)) +/* Receive Off (1) */ +#define SSC_MCON_RXOFF (0x1 << 1) +#define SSC_MCON_RXOFF_VAL(val) (((val) & 0x1) << 1) +#define SSC_MCON_RXOFF_GET(val) ((((val) & SSC_MCON_RXOFF) >> 1) & 0x1) +#define SSC_MCON_RXOFF_SET(reg,val) (reg) = ((reg & ~SSC_MCON_RXOFF) | (((val) & 0x1) << 1)) +/* Transmit Off (0) */ +#define SSC_MCON_TXOFF (0x1) +#define SSC_MCON_TXOFF_VAL(val) (((val) & 0x1) << 0) +#define SSC_MCON_TXOFF_GET(val) ((((val) & SSC_MCON_TXOFF) >> 0) & 0x1) +#define SSC_MCON_TXOFF_SET(reg,val) (reg) = ((reg & ~SSC_MCON_TXOFF) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * STATE Register + ******************************************************************************/ + +/* Receive End-of-Message (31) */ +#define SSC_STATE_RXEOM (0x1 << 31) +#define SSC_STATE_RXEOM_GET(val) ((((val) & SSC_STATE_RXEOM) >> 31) & 0x1) +/* Receive Byte Valid (30:28) */ +#define SSC_STATE_RXBV (0x7 << 28) +#define SSC_STATE_RXBV_GET(val) ((((val) & SSC_STATE_RXBV) >> 28) & 0x7) +/* Transmit End-of-Message (27) */ +#define SSC_STATE_TXEOM (0x1 << 27) +#define SSC_STATE_TXEOM_GET(val) ((((val) & SSC_STATE_TXEOM) >> 27) & 0x1) +/* Transmit Byte Valid (26:24) */ +#define SSC_STATE_TXBV (0x7 << 24) +#define SSC_STATE_TXBV_GET(val) ((((val) & SSC_STATE_TXBV) >> 24) & 0x7) +/* Bit Count Field (20:16) */ +#define SSC_STATE_BC (0x1f << 16) +#define SSC_STATE_BC_GET(val) ((((val) & SSC_STATE_BC) >> 16) & 0x1f) +/* Busy Flag (13) */ +#define SSC_STATE_BSY (0x1 << 13) +#define SSC_STATE_BSY_GET(val) ((((val) & SSC_STATE_BSY) >> 13) & 0x1) +/* Receive Underflow Error Flag (12) */ +#define SSC_STATE_RUE (0x1 << 12) +#define SSC_STATE_RUE_GET(val) ((((val) & SSC_STATE_RUE) >> 12) & 0x1) +/* Transmit Underflow Error Flag (11) */ +#define SSC_STATE_TUE (0x1 << 11) +#define SSC_STATE_TUE_GET(val) ((((val) & SSC_STATE_TUE) >> 11) & 0x1) +/* Abort Error Flag (10) */ +#define SSC_STATE_AE (0x1 << 10) +#define SSC_STATE_AE_GET(val) ((((val) & SSC_STATE_AE) >> 10) & 0x1) +/* Receive Error Flag (9) */ +#define SSC_STATE_RE (0x1 << 9) +#define SSC_STATE_RE_GET(val) ((((val) & SSC_STATE_RE) >> 9) & 0x1) +/* Transmit Error Flag (8) */ +#define SSC_STATE_TE (0x1 << 8) +#define SSC_STATE_TE_GET(val) ((((val) & SSC_STATE_TE) >> 8) & 0x1) +/* Mode Error Flag (7) */ +#define SSC_STATE_ME (0x1 << 7) +#define SSC_STATE_ME_GET(val) ((((val) & SSC_STATE_ME) >> 7) & 0x1) +/* Slave Selected (2) */ +#define SSC_STATE_SSEL (0x1 << 2) +#define SSC_STATE_SSEL_GET(val) ((((val) & SSC_STATE_SSEL) >> 2) & 0x1) +/* Master Select Bit (1) */ +#define SSC_STATE_MS (0x1 << 1) +#define SSC_STATE_MS_GET(val) ((((val) & SSC_STATE_MS) >> 1) & 0x1) +/* Enable Bit (0) */ +#define SSC_STATE_EN (0x1) +#define SSC_STATE_EN_GET(val) ((((val) & SSC_STATE_EN) >> 0) & 0x1) + +/******************************************************************************* + * WHBSTATE Register + ******************************************************************************/ + +/* Set Transmit Underflow Error Flag Bit (15) */ +#define SSC_WHBSTATE_SETTUE (0x1 << 15) +#define SSC_WHBSTATE_SETTUE_VAL(val) (((val) & 0x1) << 15) +#define SSC_WHBSTATE_SETTUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETTUE) | (val) & 1) << 15) +/* Set Abort Error Flag Bit (14) */ +#define SSC_WHBSTATE_SETAE (0x1 << 14) +#define SSC_WHBSTATE_SETAE_VAL(val) (((val) & 0x1) << 14) +#define SSC_WHBSTATE_SETAE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETAE) | (val) & 1) << 14) +/* Set Receive Error Flag Bit (13) */ +#define SSC_WHBSTATE_SETRE (0x1 << 13) +#define SSC_WHBSTATE_SETRE_VAL(val) (((val) & 0x1) << 13) +#define SSC_WHBSTATE_SETRE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETRE) | (val) & 1) << 13) +/* Set Transmit Error Flag Bit (12) */ +#define SSC_WHBSTATE_SETTE (0x1 << 12) +#define SSC_WHBSTATE_SETTE_VAL(val) (((val) & 0x1) << 12) +#define SSC_WHBSTATE_SETTE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETTE) | (val) & 1) << 12) +/* Clear Transmit Underflow Error Flag Bit (11) */ +#define SSC_WHBSTATE_CLRTUE (0x1 << 11) +#define SSC_WHBSTATE_CLRTUE_VAL(val) (((val) & 0x1) << 11) +#define SSC_WHBSTATE_CLRTUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRTUE) | (val) & 1) << 11) +/* Clear Abort Error Flag Bit (10) */ +#define SSC_WHBSTATE_CLRAE (0x1 << 10) +#define SSC_WHBSTATE_CLRAE_VAL(val) (((val) & 0x1) << 10) +#define SSC_WHBSTATE_CLRAE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRAE) | (val) & 1) << 10) +/* Clear Receive Error Flag Bit (9) */ +#define SSC_WHBSTATE_CLRRE (0x1 << 9) +#define SSC_WHBSTATE_CLRRE_VAL(val) (((val) & 0x1) << 9) +#define SSC_WHBSTATE_CLRRE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRRE) | (val) & 1) << 9) +/* Clear Transmit Error Flag Bit (8) */ +#define SSC_WHBSTATE_CLRTE (0x1 << 8) +#define SSC_WHBSTATE_CLRTE_VAL(val) (((val) & 0x1) << 8) +#define SSC_WHBSTATE_CLRTE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRTE) | (val) & 1) << 8) +/* Set Mode Error Flag Bit (7) */ +#define SSC_WHBSTATE_SETME (0x1 << 7) +#define SSC_WHBSTATE_SETME_VAL(val) (((val) & 0x1) << 7) +#define SSC_WHBSTATE_SETME_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETME) | (val) & 1) << 7) +/* Clear Mode Error Flag Bit (6) */ +#define SSC_WHBSTATE_CLRME (0x1 << 6) +#define SSC_WHBSTATE_CLRME_VAL(val) (((val) & 0x1) << 6) +#define SSC_WHBSTATE_CLRME_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRME) | (val) & 1) << 6) +/* Set Receive Underflow Error Bit (5) */ +#define SSC_WHBSTATE_SETRUE (0x1 << 5) +#define SSC_WHBSTATE_SETRUE_VAL(val) (((val) & 0x1) << 5) +#define SSC_WHBSTATE_SETRUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETRUE) | (val) & 1) << 5) +/* Clear Receive Underflow Error Bit (4) */ +#define SSC_WHBSTATE_CLRRUE (0x1 << 4) +#define SSC_WHBSTATE_CLRRUE_VAL(val) (((val) & 0x1) << 4) +#define SSC_WHBSTATE_CLRRUE_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRRUE) | (val) & 1) << 4) +/* Set Master Select Bit (3) */ +#define SSC_WHBSTATE_SETMS (0x1 << 3) +#define SSC_WHBSTATE_SETMS_VAL(val) (((val) & 0x1) << 3) +#define SSC_WHBSTATE_SETMS_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETMS) | (val) & 1) << 3) +/* Clear Master Select Bit (2) */ +#define SSC_WHBSTATE_CLRMS (0x1 << 2) +#define SSC_WHBSTATE_CLRMS_VAL(val) (((val) & 0x1) << 2) +#define SSC_WHBSTATE_CLRMS_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLRMS) | (val) & 1) << 2) +/* Set Enable Bit (1) */ +#define SSC_WHBSTATE_SETEN (0x1 << 1) +#define SSC_WHBSTATE_SETEN_VAL(val) (((val) & 0x1) << 1) +#define SSC_WHBSTATE_SETEN_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_SETEN) | (val) & 1) << 1) +/* Clear Enable Bit (0) */ +#define SSC_WHBSTATE_CLREN (0x1) +#define SSC_WHBSTATE_CLREN_VAL(val) (((val) & 0x1) << 0) +#define SSC_WHBSTATE_CLREN_SET(reg,val) (reg) = (((reg & ~SSC_WHBSTATE_CLREN) | (val) & 1) << 0) + +/******************************************************************************* + * TB Register + ******************************************************************************/ + +/* Transmit Data Register Value (31:0) */ +#define SSC_TB_TB_VAL (0xFFFFFFFFL) +#define SSC_TB_TB_VAL_VAL(val) (((val) & 0xFFFFFFFFL) << 0) +#define SSC_TB_TB_VAL_GET(val) ((((val) & SSC_TB_TB_VAL) >> 0) & 0xFFFFFFFFL) +#define SSC_TB_TB_VAL_SET(reg,val) (reg) = ((reg & ~SSC_TB_TB_VAL) | (((val) & 0xFFFFFFFFL) << 0)) + +/******************************************************************************* + * RB Register + ******************************************************************************/ + +/* Receive Data Register Value (31:0) */ +#define SSC_RB_RB_VAL (0xFFFFFFFFL) +#define SSC_RB_RB_VAL_GET(val) ((((val) & SSC_RB_RB_VAL) >> 0) & 0xFFFFFFFFL) + +/******************************************************************************* + * FSTAT Register + ******************************************************************************/ + +/* Transmit FIFO Filling Level (13:8) */ +#define SSC_FSTAT_TXFFL (0x3f << 8) +#define SSC_FSTAT_TXFFL_GET(val) ((((val) & SSC_FSTAT_TXFFL) >> 8) & 0x3f) +/* Receive FIFO Filling Level (5:0) */ +#define SSC_FSTAT_RXFFL (0x3f) +#define SSC_FSTAT_RXFFL_GET(val) ((((val) & SSC_FSTAT_RXFFL) >> 0) & 0x3f) + +/******************************************************************************* + * PISEL Register + ******************************************************************************/ + +/* Slave Mode Clock Input Select (2) */ +#define SSC_PISEL_CIS (0x1 << 2) +#define SSC_PISEL_CIS_VAL(val) (((val) & 0x1) << 2) +#define SSC_PISEL_CIS_GET(val) ((((val) & SSC_PISEL_CIS) >> 2) & 0x1) +#define SSC_PISEL_CIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_CIS) | (((val) & 0x1) << 2)) +/* Slave Mode Receiver Input Select (1) */ +#define SSC_PISEL_SIS (0x1 << 1) +#define SSC_PISEL_SIS_VAL(val) (((val) & 0x1) << 1) +#define SSC_PISEL_SIS_GET(val) ((((val) & SSC_PISEL_SIS) >> 1) & 0x1) +#define SSC_PISEL_SIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_SIS) | (((val) & 0x1) << 1)) +/* Master Mode Receiver Input Select (0) */ +#define SSC_PISEL_MIS (0x1) +#define SSC_PISEL_MIS_VAL(val) (((val) & 0x1) << 0) +#define SSC_PISEL_MIS_GET(val) ((((val) & SSC_PISEL_MIS) >> 0) & 0x1) +#define SSC_PISEL_MIS_SET(reg,val) (reg) = ((reg & ~SSC_PISEL_MIS) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * RXFCON Register + ******************************************************************************/ + +/* Receive FIFO Interrupt Trigger Level (13:8) */ +#define SSC_RXFCON_RXFITL (0x3f << 8) +#define SSC_RXFCON_RXFITL_VAL(val) (((val) & 0x3f) << 8) +#define SSC_RXFCON_RXFITL_GET(val) ((((val) & SSC_RXFCON_RXFITL) >> 8) & 0x3f) +#define SSC_RXFCON_RXFITL_SET(reg,val) (reg) = ((reg & ~SSC_RXFCON_RXFITL) | (((val) & 0x3f) << 8)) +/* Receive FIFO Flush (1) */ +#define SSC_RXFCON_RXFLU (0x1 << 1) +#define SSC_RXFCON_RXFLU_VAL(val) (((val) & 0x1) << 1) +#define SSC_RXFCON_RXFLU_SET(reg,val) (reg) = (((reg & ~SSC_RXFCON_RXFLU) | (val) & 1) << 1) +/* Receive FIFO Enable (0) */ +#define SSC_RXFCON_RXFEN (0x1) +#define SSC_RXFCON_RXFEN_VAL(val) (((val) & 0x1) << 0) +#define SSC_RXFCON_RXFEN_GET(val) ((((val) & SSC_RXFCON_RXFEN) >> 0) & 0x1) +#define SSC_RXFCON_RXFEN_SET(reg,val) (reg) = ((reg & ~SSC_RXFCON_RXFEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * TXFCON Register + ******************************************************************************/ + +/* Transmit FIFO Interrupt Trigger Level (13:8) */ +#define SSC_TXFCON_TXFITL (0x3f << 8) +#define SSC_TXFCON_TXFITL_VAL(val) (((val) & 0x3f) << 8) +#define SSC_TXFCON_TXFITL_GET(val) ((((val) & SSC_TXFCON_TXFITL) >> 8) & 0x3f) +#define SSC_TXFCON_TXFITL_SET(reg,val) (reg) = ((reg & ~SSC_TXFCON_TXFITL) | (((val) & 0x3f) << 8)) +/* Transmit FIFO Flush (1) */ +#define SSC_TXFCON_TXFLU (0x1 << 1) +#define SSC_TXFCON_TXFLU_VAL(val) (((val) & 0x1) << 1) +#define SSC_TXFCON_TXFLU_SET(reg,val) (reg) = (((reg & ~SSC_TXFCON_TXFLU) | (val) & 1) << 1) +/* Transmit FIFO Enable (0) */ +#define SSC_TXFCON_TXFEN (0x1) +#define SSC_TXFCON_TXFEN_VAL(val) (((val) & 0x1) << 0) +#define SSC_TXFCON_TXFEN_GET(val) ((((val) & SSC_TXFCON_TXFEN) >> 0) & 0x1) +#define SSC_TXFCON_TXFEN_SET(reg,val) (reg) = ((reg & ~SSC_TXFCON_TXFEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * BR Register + ******************************************************************************/ + +/* Baudrate Timer Reload Register Value (15:0) */ +#define SSC_BR_BR_VAL (0xffff) +#define SSC_BR_BR_VAL_VAL(val) (((val) & 0xffff) << 0) +#define SSC_BR_BR_VAL_GET(val) ((((val) & SSC_BR_BR_VAL) >> 0) & 0xffff) +#define SSC_BR_BR_VAL_SET(reg,val) (reg) = ((reg & ~SSC_BR_BR_VAL) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * BRSTAT Register + ******************************************************************************/ + +/* Baudrate Timer Register Value (15:0) */ +#define SSC_BRSTAT_BT_VAL (0xffff) +#define SSC_BRSTAT_BT_VAL_GET(val) ((((val) & SSC_BRSTAT_BT_VAL) >> 0) & 0xffff) + +/******************************************************************************* + * SFCON Register + ******************************************************************************/ + +/* Pause Length (31:22) */ +#define SSC_SFCON_PLEN (0x3ff << 22) +#define SSC_SFCON_PLEN_VAL(val) (((val) & 0x3ff) << 22) +#define SSC_SFCON_PLEN_GET(val) ((((val) & SSC_SFCON_PLEN) >> 22) & 0x3ff) +#define SSC_SFCON_PLEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_PLEN) | (((val) & 0x3ff) << 22)) +/* Stop After Pause (20) */ +#define SSC_SFCON_STOP (0x1 << 20) +#define SSC_SFCON_STOP_VAL(val) (((val) & 0x1) << 20) +#define SSC_SFCON_STOP_GET(val) ((((val) & SSC_SFCON_STOP) >> 20) & 0x1) +#define SSC_SFCON_STOP_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_STOP) | (((val) & 0x1) << 20)) +/* Idle Clock Configuration (19:18) */ +#define SSC_SFCON_ICLK (0x3 << 18) +#define SSC_SFCON_ICLK_VAL(val) (((val) & 0x3) << 18) +#define SSC_SFCON_ICLK_GET(val) ((((val) & SSC_SFCON_ICLK) >> 18) & 0x3) +#define SSC_SFCON_ICLK_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_ICLK) | (((val) & 0x3) << 18)) +/* Idle Data Configuration (17:16) */ +#define SSC_SFCON_IDAT (0x3 << 16) +#define SSC_SFCON_IDAT_VAL(val) (((val) & 0x3) << 16) +#define SSC_SFCON_IDAT_GET(val) ((((val) & SSC_SFCON_IDAT) >> 16) & 0x3) +#define SSC_SFCON_IDAT_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IDAT) | (((val) & 0x3) << 16)) +/* Data Length (15:4) */ +#define SSC_SFCON_DLEN (0xfff << 4) +#define SSC_SFCON_DLEN_VAL(val) (((val) & 0xfff) << 4) +#define SSC_SFCON_DLEN_GET(val) ((((val) & SSC_SFCON_DLEN) >> 4) & 0xfff) +#define SSC_SFCON_DLEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_DLEN) | (((val) & 0xfff) << 4)) +/* Enable Interrupt After Pause (3) */ +#define SSC_SFCON_IAEN (0x1 << 3) +#define SSC_SFCON_IAEN_VAL(val) (((val) & 0x1) << 3) +#define SSC_SFCON_IAEN_GET(val) ((((val) & SSC_SFCON_IAEN) >> 3) & 0x1) +#define SSC_SFCON_IAEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IAEN) | (((val) & 0x1) << 3)) +/* Enable Interrupt Before Pause (2) */ +#define SSC_SFCON_IBEN (0x1 << 2) +#define SSC_SFCON_IBEN_VAL(val) (((val) & 0x1) << 2) +#define SSC_SFCON_IBEN_GET(val) ((((val) & SSC_SFCON_IBEN) >> 2) & 0x1) +#define SSC_SFCON_IBEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_IBEN) | (((val) & 0x1) << 2)) +/* Serial Frame Enable (0) */ +#define SSC_SFCON_SFEN (0x1) +#define SSC_SFCON_SFEN_VAL(val) (((val) & 0x1) << 0) +#define SSC_SFCON_SFEN_GET(val) ((((val) & SSC_SFCON_SFEN) >> 0) & 0x1) +#define SSC_SFCON_SFEN_SET(reg,val) (reg) = ((reg & ~SSC_SFCON_SFEN) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SFSTAT Register + ******************************************************************************/ + +/* Pause Count (31:22) */ +#define SSC_SFSTAT_PCNT (0x3ff << 22) +#define SSC_SFSTAT_PCNT_GET(val) ((((val) & SSC_SFSTAT_PCNT) >> 22) & 0x3ff) +/* Data Bit Count (15:4) */ +#define SSC_SFSTAT_DCNT (0xfff << 4) +#define SSC_SFSTAT_DCNT_GET(val) ((((val) & SSC_SFSTAT_DCNT) >> 4) & 0xfff) +/* Pause Busy (1) */ +#define SSC_SFSTAT_PBSY (0x1 << 1) +#define SSC_SFSTAT_PBSY_GET(val) ((((val) & SSC_SFSTAT_PBSY) >> 1) & 0x1) +/* Data Busy (0) */ +#define SSC_SFSTAT_DBSY (0x1) +#define SSC_SFSTAT_DBSY_GET(val) ((((val) & SSC_SFSTAT_DBSY) >> 0) & 0x1) + +/******************************************************************************* + * GPOCON Register + ******************************************************************************/ + +/* Output OUTn Is Chip Select (15:8) */ +#define SSC_GPOCON_ISCSBN (0xff << 8) +#define SSC_GPOCON_ISCSBN_VAL(val) (((val) & 0xff) << 8) +#define SSC_GPOCON_ISCSBN_GET(val) ((((val) & SSC_GPOCON_ISCSBN) >> 8) & 0xff) +#define SSC_GPOCON_ISCSBN_SET(reg,val) (reg) = ((reg & ~SSC_GPOCON_ISCSBN) | (((val) & 0xff) << 8)) +/* Invert Output OUTn (7:0) */ +#define SSC_GPOCON_INVOUTN (0xff) +#define SSC_GPOCON_INVOUTN_VAL(val) (((val) & 0xff) << 0) +#define SSC_GPOCON_INVOUTN_GET(val) ((((val) & SSC_GPOCON_INVOUTN) >> 0) & 0xff) +#define SSC_GPOCON_INVOUTN_SET(reg,val) (reg) = ((reg & ~SSC_GPOCON_INVOUTN) | (((val) & 0xff) << 0)) + +/******************************************************************************* + * GPOSTAT Register + ******************************************************************************/ + +/* Output Register Bit n (7:0) */ +#define SSC_GPOSTAT_OUTN (0xff) +#define SSC_GPOSTAT_OUTN_GET(val) ((((val) & SSC_GPOSTAT_OUTN) >> 0) & 0xff) + +/******************************************************************************* + * WHBGPOSTAT + ******************************************************************************/ + +/* Set Output Register Bit n (15:8) */ +#define SSC_WHBGPOSTAT_SETOUTN (0xff << 8) +#define SSC_WHBGPOSTAT_SETOUTN_VAL(val) (((val) & 0xff) << 8) +#define SSC_WHBGPOSTAT_SETOUTN_SET(reg,val) (reg) = (((reg & ~SSC_WHBGPOSTAT_SETOUTN) | (val) & 1) << 8) +/* Clear Output Register Bit n (7:0) */ +#define SSC_WHBGPOSTAT_CLROUTN (0xff) +#define SSC_WHBGPOSTAT_CLROUTN_VAL(val) (((val) & 0xff) << 0) +#define SSC_WHBGPOSTAT_CLROUTN_SET(reg,val) (reg) = (((reg & ~SSC_WHBGPOSTAT_CLROUTN) | (val) & 1) << 0) + +/******************************************************************************* + * RXREQ Register + ******************************************************************************/ + +/* Receive Count Value (15:0) */ +#define SSC_RXREQ_RXCNT (0xffff) +#define SSC_RXREQ_RXCNT_VAL(val) (((val) & 0xffff) << 0) +#define SSC_RXREQ_RXCNT_GET(val) ((((val) & SSC_RXREQ_RXCNT) >> 0) & 0xffff) +#define SSC_RXREQ_RXCNT_SET(reg,val) (reg) = ((reg & ~SSC_RXREQ_RXCNT) | (((val) & 0xffff) << 0)) + +/******************************************************************************* + * RXCNT Register + ******************************************************************************/ + +/* Receive To Do Value (15:0) */ +#define SSC_RXCNT_TODO (0xffff) +#define SSC_RXCNT_TODO_GET(val) ((((val) & SSC_RXCNT_TODO) >> 0) & 0xffff) + +/******************************************************************************* + * DMA_CON Register + ******************************************************************************/ + +/* Receive Class (3:2) */ +#define SSC_DMA_CON_RXCLS (0x3 << 2) +#define SSC_DMA_CON_RXCLS_VAL(val) (((val) & 0x3) << 2) +#define SSC_DMA_CON_RXCLS_GET(val) ((((val) & SSC_DMA_CON_RXCLS) >> 2) & 0x3) +#define SSC_DMA_CON_RXCLS_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_RXCLS) | (((val) & 0x3) << 2)) +/* Transmit Path On (1) */ +#define SSC_DMA_CON_TXON (0x1 << 1) +#define SSC_DMA_CON_TXON_VAL(val) (((val) & 0x1) << 1) +#define SSC_DMA_CON_TXON_GET(val) ((((val) & SSC_DMA_CON_TXON) >> 1) & 0x1) +#define SSC_DMA_CON_TXON_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_TXON) | (((val) & 0x1) << 1)) +/* Receive Path On (0) */ +#define SSC_DMA_CON_RXON (0x1) +#define SSC_DMA_CON_RXON_VAL(val) (((val) & 0x1) << 0) +#define SSC_DMA_CON_RXON_GET(val) ((((val) & SSC_DMA_CON_RXON) >> 0) & 0x1) +#define SSC_DMA_CON_RXON_SET(reg,val) (reg) = ((reg & ~SSC_DMA_CON_RXON) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * IRNEN Register + ******************************************************************************/ + +/* Frame End Interrupt Request Enable (3) */ +#define SSC_IRNEN_F (0x1 << 3) +#define SSC_IRNEN_F_VAL(val) (((val) & 0x1) << 3) +#define SSC_IRNEN_F_GET(val) ((((val) & SSC_IRNEN_F) >> 3) & 0x1) +#define SSC_IRNEN_F_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_F) | (((val) & 0x1) << 3)) +/* Error Interrupt Request Enable (2) */ +#define SSC_IRNEN_E (0x1 << 2) +#define SSC_IRNEN_E_VAL(val) (((val) & 0x1) << 2) +#define SSC_IRNEN_E_GET(val) ((((val) & SSC_IRNEN_E) >> 2) & 0x1) +#define SSC_IRNEN_E_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_E) | (((val) & 0x1) << 2)) +/* Receive Interrupt Request Enable (1) */ +#define SSC_IRNEN_R (0x1 << 1) +#define SSC_IRNEN_R_VAL(val) (((val) & 0x1) << 1) +#define SSC_IRNEN_R_GET(val) ((((val) & SSC_IRNEN_R) >> 1) & 0x1) +#define SSC_IRNEN_R_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_R) | (((val) & 0x1) << 1)) +/* Transmit Interrupt Request Enable (0) */ +#define SSC_IRNEN_T (0x1) +#define SSC_IRNEN_T_VAL(val) (((val) & 0x1) << 0) +#define SSC_IRNEN_T_GET(val) ((((val) & SSC_IRNEN_T) >> 0) & 0x1) +#define SSC_IRNEN_T_SET(reg,val) (reg) = ((reg & ~SSC_IRNEN_T) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * IRNICR Register + ******************************************************************************/ + +/* Frame End Interrupt Request (3) */ +#define SSC_IRNICR_F (0x1 << 3) +#define SSC_IRNICR_F_GET(val) ((((val) & SSC_IRNICR_F) >> 3) & 0x1) +/* Error Interrupt Request (2) */ +#define SSC_IRNICR_E (0x1 << 2) +#define SSC_IRNICR_E_GET(val) ((((val) & SSC_IRNICR_E) >> 2) & 0x1) +/* Receive Interrupt Request (1) */ +#define SSC_IRNICR_R (0x1 << 1) +#define SSC_IRNICR_R_GET(val) ((((val) & SSC_IRNICR_R) >> 1) & 0x1) +/* Transmit Interrupt Request (0) */ +#define SSC_IRNICR_T (0x1) +#define SSC_IRNICR_T_GET(val) ((((val) & SSC_IRNICR_T) >> 0) & 0x1) + +/******************************************************************************* + * IRNCR Register + ******************************************************************************/ + +/* Frame End Interrupt Request (3) */ +#define SSC_IRNCR_F (0x1 << 3) +#define SSC_IRNCR_F_GET(val) ((((val) & SSC_IRNCR_F) >> 3) & 0x1) +/* Error Interrupt Request (2) */ +#define SSC_IRNCR_E (0x1 << 2) +#define SSC_IRNCR_E_GET(val) ((((val) & SSC_IRNCR_E) >> 2) & 0x1) +/* Receive Interrupt Request (1) */ +#define SSC_IRNCR_R (0x1 << 1) +#define SSC_IRNCR_R_GET(val) ((((val) & SSC_IRNCR_R) >> 1) & 0x1) +/* Transmit Interrupt Request (0) */ +#define SSC_IRNCR_T (0x1) +#define SSC_IRNCR_T_GET(val) ((((val) & SSC_IRNCR_T) >> 0) & 0x1) + +#endif /* __SSC_H */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/status_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/status_reg.h new file mode 100644 index 0000000000..100230fa7c --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/status_reg.h @@ -0,0 +1,130 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __STATUS_REG_H +#define __STATUS_REG_H + +#define status_r32(reg) ltq_r32(&status->reg) +#define status_w32(val, reg) ltq_w32(val, &status->reg) +#define status_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &status->reg) + +/** STATUS register structure */ +struct svip_reg_status { + unsigned long fuse_deu; /* 0x0000 */ + unsigned long fuse_cpu; /* 0x0004 */ + unsigned long fuse_pll; /* 0x0008 */ + unsigned long chipid; /* 0x000C */ + unsigned long config; /* 0x0010 */ + unsigned long chip_loc; /* 0x0014 */ + unsigned long fuse_spare; /* 0x0018 */ +}; + +/******************************************************************************* + * Fuse for DEU Settings + ******************************************************************************/ + +/* Fuse for Enabling the TRNG (6) */ +#define STATUS_FUSE_DEU_TRNG (0x1 << 6) +#define STATUS_FUSE_DEU_TRNG_GET(val) ((((val) & STATUS_FUSE_DEU_TRNG) >> 6) & 0x1) +/* Fuse for Enabling the DES Submodule (5) */ +#define STATUS_FUSE_DEU_DES (0x1 << 5) +#define STATUS_FUSE_DEU_DES_GET(val) ((((val) & STATUS_FUSE_DEU_DES) >> 5) & 0x1) +/* Fuse for Enabling the 3DES Submodule (4) */ +#define STATUS_FUSE_DEU_3DES (0x1 << 4) +#define STATUS_FUSE_DEU_3DES_GET(val) ((((val) & STATUS_FUSE_DEU_3DES) >> 4) & 0x1) +/* Fuse for Enabling the AES Submodule (3) */ +#define STATUS_FUSE_DEU_AES (0x1 << 3) +#define STATUS_FUSE_DEU_AES_GET(val) ((((val) & STATUS_FUSE_DEU_AES) >> 3) & 0x1) +/* Fuse for Enabling the HASH Submodule (2) */ +#define STATUS_FUSE_DEU_HASH (0x1 << 2) +#define STATUS_FUSE_DEU_HASH_GET(val) ((((val) & STATUS_FUSE_DEU_HASH) >> 2) & 0x1) +/* Fuse for Enabling the ARC4 Submodule (1) */ +#define STATUS_FUSE_DEU_ARC4 (0x1 << 1) +#define STATUS_FUSE_DEU_ARC4_GET(val) ((((val) & STATUS_FUSE_DEU_ARC4) >> 1) & 0x1) +/* Fuse for Enabling the DEU Module (0) */ +#define STATUS_FUSE_DEU_DEU (0x1) +#define STATUS_FUSE_DEU_DEU_GET(val) ((((val) & STATUS_FUSE_DEU_DEU) >> 0) & 0x1) + +/******************************************************************************* + * Fuse for CPU Settings + ******************************************************************************/ + +/* Fuse for Enabling CPU5 (5) */ +#define STATUS_FUSE_CPU_CPU5 (0x1 << 5) +#define STATUS_FUSE_CPU_CPU5_GET(val) ((((val) & STATUS_FUSE_CPU_CPU5) >> 5) & 0x1) +/* Fuse for Enabling the CPU4 (4) */ +#define STATUS_FUSE_CPU_CPU4 (0x1 << 4) +#define STATUS_FUSE_CPU_CPU4_GET(val) ((((val) & STATUS_FUSE_CPU_CPU4) >> 4) & 0x1) +/* Fuse for Enabling the CPU3 (3) */ +#define STATUS_FUSE_CPU_CPU3 (0x1 << 3) +#define STATUS_FUSE_CPU_CPU3_GET(val) ((((val) & STATUS_FUSE_CPU_CPU3) >> 3) & 0x1) +/* Fuse for Enabling the CPU2 (2) */ +#define STATUS_FUSE_CPU_CPU2 (0x1 << 2) +#define STATUS_FUSE_CPU_CPU2_GET(val) ((((val) & STATUS_FUSE_CPU_CPU2) >> 2) & 0x1) +/* Fuse for Enabling the CPU1 (1) */ +#define STATUS_FUSE_CPU_CPU1 (0x1 << 1) +#define STATUS_FUSE_CPU_CPU1_GET(val) ((((val) & STATUS_FUSE_CPU_CPU1) >> 1) & 0x1) +/* Fuse for Enabling the CPU0 (0) */ +#define STATUS_FUSE_CPU_CPU0 (0x1) +#define STATUS_FUSE_CPU_CPU0_GET(val) ((((val) & STATUS_FUSE_CPU_CPU0) >> 0) & 0x1) + +/******************************************************************************* + * Fuse for PLL Settings + ******************************************************************************/ + +/* Fuse for Enabling PLL (7:0) */ +#define STATUS_FUSE_PLL_PLL (0xff) +#define STATUS_FUSE_PLL_PLL_GET(val) ((((val) & STATUS_FUSE_PLL_PLL) >> 0) & 0xff) + +/******************************************************************************* + * Chip Identification Register + ******************************************************************************/ + +/* Chip Version Number (31:28) */ +#define STATUS_CHIPID_VERSION (0xf << 28) +#define STATUS_CHIPID_VERSION_GET(val) ((((val) & STATUS_CHIPID_VERSION) >> 28) & 0xf) +/* Part Number (27:12) */ +#define STATUS_CHIPID_PART_NUMBER (0xffff << 12) +#define STATUS_CHIPID_PART_NUMBER_GET(val) ((((val) & STATUS_CHIPID_PART_NUMBER) >> 12) & 0xffff) +/* Manufacturer ID (11:1) */ +#define STATUS_CHIPID_MANID (0x7ff << 1) +#define STATUS_CHIPID_MANID_GET(val) ((((val) & STATUS_CHIPID_MANID) >> 1) & 0x7ff) + +/******************************************************************************* + * Chip Configuration Register + ******************************************************************************/ + +/* Number of Analog Channels (8:5) */ +#define STATUS_CONFIG_ANA_CHAN (0xf << 5) +#define STATUS_CONFIG_ANA_CHAN_GET(val) ((((val) & STATUS_CONFIG_ANA_CHAN) >> 5) & 0xf) +/* Clock Mode (4) */ +#define STATUS_CONFIG_CLK_MODE (0x1 << 1) +#define STATUS_CONFIG_CLK_MODE_GET(val) ((((val) & STATUS_CONFIG_CLK_MODE) >> 4) & 0x1) +/* Subversion Number (3:0) */ +#define STATUS_CONFIG_SUB_VERS (0xF) +#define STATUS_CONFIG_SUB_VERS_GET(val) ((((val) & STATUS_SUBVER_SUB_VERS) >> 0) & 0xF) + +/******************************************************************************* + * Chip Location Register + ******************************************************************************/ + +/* Chip Lot ID (31:16) */ +#define STATUS_CHIP_LOC_CHIP_LOT (0xffff << 16) +#define STATUS_CHIP_LOC_CHIP_LOT_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_LOT) >> 16) & 0xffff) +/* Chip X Coordinate (15:8) */ +#define STATUS_CHIP_LOC_CHIP_X (0xff << 8) +#define STATUS_CHIP_LOC_CHIP_X_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_X) >> 8) & 0xff) +/* Chip Y Coordinate (7:0) */ +#define STATUS_CHIP_LOC_CHIP_Y (0xff) +#define STATUS_CHIP_LOC_CHIP_Y_GET(val) ((((val) & STATUS_CHIP_LOC_CHIP_Y) >> 0) & 0xff) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h new file mode 100644 index 0000000000..5c34bb6902 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_dma.h @@ -0,0 +1,245 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#ifndef __SVIP_DMA_H +#define __SVIP_DMA_H + +#define LTQ_DMA_CH_ON 1 +#define LTQ_DMA_CH_OFF 0 +#define LTQ_DMA_CH_DEFAULT_WEIGHT 100; + +#define DMA_OWN 1 +#define CPU_OWN 0 +#define DMA_MAJOR 250 + +/* Descriptors */ +#define DMA_DESC_OWN_CPU 0x0 +#define DMA_DESC_OWN_DMA 0x80000000 +#define DMA_DESC_CPT_SET 0x40000000 +#define DMA_DESC_SOP_SET 0x20000000 +#define DMA_DESC_EOP_SET 0x10000000 + +struct rx_desc { + union { + struct { +#ifdef CONFIG_CPU_LITTLE_ENDIAN + volatile u32 data_length:16; + volatile u32 reserve2:7; + volatile u32 byte_offset:2; + volatile u32 reserve1:3; + volatile u32 eop:1; + volatile u32 sop:1; + volatile u32 c:1; + volatile u32 own:1; +#else + volatile u32 own:1; + volatile u32 c:1; + volatile u32 sop:1; + volatile u32 eop:1; + volatile u32 reserve1:3; + volatile u32 byte_offset:2; + volatile u32 reserve2:7; + volatile u32 data_length:16; +#endif + } field; + + volatile u32 word; + } status; + + volatile u32 data_pointer; +}; + +struct tx_desc { + union { + struct { +#ifdef CONFIG_CPU_LITTLE_ENDIAN + volatile u32 data_length:16; + volatile u32 reserved:7; + volatile u32 byte_offset:5; + volatile u32 eop:1; + volatile u32 sop:1; + volatile u32 c:1; + volatile u32 own:1; +#else + volatile u32 own:1; + volatile u32 c:1; + volatile u32 sop:1; + volatile u32 eop:1; + volatile u32 byte_offset:5; + volatile u32 reserved:7; + volatile u32 data_length:16; +#endif + } field; + + volatile u32 word; + } status; + + volatile u32 data_pointer; +}; + +/* DMA pseudo interrupts notified to switch driver */ +#define RCV_INT 0x01 +#define TX_BUF_FULL_INT 0x02 +#define TRANSMIT_CPT_INT 0x04 +#define CHANNEL_CLOSED 0x10 + +/* Parameters for switch DMA device */ +#define DEFAULT_SW_CHANNEL_WEIGHT 3 +#define DEFAULT_SW_PORT_WEIGHT 7 + +#define DEFAULT_SW_TX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ +#define DEFAULT_SW_RX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_SW_TX_CHANNEL_NUM 4 +#define DEFAULT_SW_RX_CHANNEL_NUM 4 + +#define DEFAULT_SW_TX_CHANNEL_DESCR_NUM 20 +#define DEFAULT_SW_RX_CHANNEL_DESCR_NUM 20 + +/* Parameters for SSC DMA device */ +#define DEFAULT_SSC_CHANNEL_WEIGHT 3 +#define DEFAULT_SSC_PORT_WEIGHT 7 + +#define DEFAULT_SSC_TX_CHANNEL_CLASS 3 +#define DEFAULT_SSC_RX_CHANNEL_CLASS 0 + +#define DEFAULT_SSC_TX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ +#define DEFAULT_SSC_RX_BURST_LEN 2 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_SSC0_TX_CHANNEL_NUM 1 +#define DEFAULT_SSC0_RX_CHANNEL_NUM 1 +#define DEFAULT_SSC1_TX_CHANNEL_NUM 1 +#define DEFAULT_SSC1_RX_CHANNEL_NUM 1 + +#define DEFAULT_SSC_TX_CHANNEL_DESCR_NUM 10 +#define DEFAULT_SSC_RX_CHANNEL_DESCR_NUM 10 + +/* Parameters for memory DMA device */ +#define DEFAULT_MEM_CHANNEL_WEIGHT 3 +#define DEFAULT_MEM_PORT_WEIGHT 7 + +#define DEFAULT_MEM_TX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ +#define DEFAULT_MEM_RX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_MEM_TX_CHANNEL_NUM 1 +#define DEFAULT_MEM_RX_CHANNEL_NUM 1 + +#define DEFAULT_MEM_TX_CHANNEL_DESCR_NUM 2 +#define DEFAULT_MEM_RX_CHANNEL_DESCR_NUM 2 + +/* Parameters for DEU DMA device */ +#define DEFAULT_DEU_CHANNEL_WEIGHT 1 +#define DEFAULT_DEU_PORT_WEIGHT 1 + +#define DEFAULT_DEU_TX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ +#define DEFAULT_DEU_RX_BURST_LEN 4 /* 2 words, 4 words, 8 words */ + +#define DEFAULT_DEU_TX_CHANNEL_DESCR_NUM 20 +#define DEFAULT_DEU_RX_CHANNEL_DESCR_NUM 20 + +#define DMA_DESCR_NUM 30 /* number of descriptors per channel */ + +enum dma_dir_t { + DIR_RX = 0, + DIR_TX = 1, +}; + +struct dma_device_info; + +struct dma_channel_info { + /*Pointer to the peripheral device who is using this channel*/ + /*const*/ struct dma_device_info *dma_dev; + /*direction*/ + const enum dma_dir_t dir; /*RX or TX*/ + /*class for this channel for QoS*/ + int pri; + /*irq number*/ + const int irq; + /*relative channel number*/ + const int rel_chan_no; + /*absolute channel number*/ + int abs_chan_no; + + /*specify byte_offset*/ + int byte_offset; + int tx_weight; + + /*descriptor parameter*/ + int desc_base; + int desc_len; + int curr_desc; + int prev_desc;/*only used if it is a tx channel*/ + + /*weight setting for WFQ algorithm*/ + int weight; + int default_weight; + + int packet_size; + + /*status of this channel*/ + int control; /*on or off*/ + int xfer_cnt; + int dur; /*descriptor underrun*/ + + /**optional information for the upper layer devices*/ + void *opt[DMA_DESCR_NUM]; + + /*channel operations*/ + int (*open)(struct dma_channel_info *ch); + int (*close)(struct dma_channel_info *ch); + int (*reset)(struct dma_channel_info *ch); + void (*enable_irq)(struct dma_channel_info *ch); + void (*disable_irq)(struct dma_channel_info *ch); +}; + + +struct dma_device_info { + /*device name of this peripheral*/ + const char device_name[16]; + const int max_rx_chan_num; + const int max_tx_chan_num; + int drop_enable; + + int reserved; + + int tx_burst_len; + int rx_burst_len; + int tx_weight; + + int current_tx_chan; + int current_rx_chan; + int num_tx_chan; + int num_rx_chan; + int tx_endianness_mode; + int rx_endianness_mode; + struct dma_channel_info *tx_chan[4]; + struct dma_channel_info *rx_chan[4]; + + /*functions, optional*/ + u8 *(*buffer_alloc)(int len,int *offset, void **opt); + void (*buffer_free)(u8 *dataptr, void *opt); + int (*intr_handler)(struct dma_device_info *dma_dev, int status); + + /* used by peripheral driver only */ + void *priv; +}; + +struct dma_device_info *dma_device_reserve(char *dev_name); +int dma_device_release(struct dma_device_info *dma_dev); +int dma_device_register(struct dma_device_info *dma_dev); +int dma_device_unregister(struct dma_device_info *dma_dev); +int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt); +int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, + int len, void *opt); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h new file mode 100644 index 0000000000..bca8df9fd5 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_irq.h @@ -0,0 +1,35 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2010 Lantiq + */ +#ifndef __SVIP_IRQ_H +#define __SVIP_IRQ_H + +#define IM_NUM 6 + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32) +#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32) +#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32) +#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define INT_NUM_IM5_IRL0 (INT_NUM_IRQ0 + 160) +#define MIPS_CPU_TIMER_IRQ (INT_NUM_IM5_IRL0 + 2) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h new file mode 100644 index 0000000000..8ca3285f2c --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_mux.h @@ -0,0 +1,467 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#ifndef __SVIP_MUX_H +#define __SVIP_MUX_H + +#define LTQ_MUX_P0_PINS 20 +#define LTQ_MUX_P1_PINS 20 +#define LTQ_MUX_P2_PINS 19 +#define LTQ_MUX_P3_PINS 20 +#define LTQ_MUX_P4_PINS 24 + +struct ltq_mux_pin { + int dirin; + int puen; + int altsel0; + int altsel1; +}; + +struct ltq_mux_settings { + const struct ltq_mux_pin *mux_p0; + const struct ltq_mux_pin *mux_p1; + const struct ltq_mux_pin *mux_p2; + const struct ltq_mux_pin *mux_p3; + const struct ltq_mux_pin *mux_p4; +}; + +#define LTQ_MUX_P0_19_EXINT16 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_19 { 0, 0, 1, 0 } + +#define LTQ_MUX_P0_18_EJ_BRKIN { 1, 0, 0, 0 } +#define LTQ_MUX_P0_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_17_EXINT10 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_17 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_17_ASC1_RXD { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_16_EXINT9 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_16 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_16_ASC1_TXD { 0, 0, 1, 0 } + +#define LTQ_MUX_P0_15_EXINT8 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_15 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_15_ASC0_RXD { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_14_EXINT7 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_14 { 0, 0, 0, 0 } +#define LTQ_MUX_P0_14_ASC0_TXD { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_13_SSC0_CS7 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_13_EXINT6 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_13 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_13_SSC1_CS7 { 0, 0, 0, 1 } +#define LTQ_MUX_P0_13_SSC1_INT { 0, 0, 1, 1 } + +#define LTQ_MUX_P0_12_SSC0_CS6 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_12_EXINT5 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_12 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_12_SSC1_CS6 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_11_SSC0_CS5 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_11_EXINT4 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_11 { 1, 0, 0, 0 } +#define LTQ_MUX_P0_11_SSC1_CS5 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_10_SSC0_CS4 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_10_EXINT3 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_10_SSC1_CS4 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_9_SSC0_CS3 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_9_EXINT2 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_9_SSC1_CS3 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_8_SSC0_CS2 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_8_EXINT1 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_8_SSC1_CS2 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_7_SSC0_CS1 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_7_EXINT0 { 1, 0, 1, 0 } +#define LTQ_MUX_P0_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_7_SSC1_CS1 { 0, 0, 0, 1 } +#define LTQ_MUX_P0_7_SSC1_CS0 { 1, 0, 0, 1 } +#define LTQ_MUX_P0_7_SSC2_CS0 { 1, 0, 1, 1 } + +#define LTQ_MUX_P0_6_SSC0_CS0 { 0, 1, 0, 0 } +#define LTQ_MUX_P0_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_6_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_6_SSC1_CS0 { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_5_SSC1_SCLK { 0, 0, 0, 0 } +#define LTQ_MUX_P0_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_5_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_5_SSC2_CLK { 1, 0, 0, 1 } + +#define LTQ_MUX_P0_4_SSC1_MRST { 1, 0, 0, 0 } +#define LTQ_MUX_P0_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_4_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_4_SSC2_MRST { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_3_SSC1_MTSR { 0, 0, 0, 0 } +#define LTQ_MUX_P0_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_3_IN { 1, 0, 1, 0 } +#define LTQ_MUX_P0_3_SSC2_MTSR { 0, 0, 0, 1 } + +#define LTQ_MUX_P0_2_SSC0_SCLK { 0, 0, 0, 0 } +#define LTQ_MUX_P0_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_1_SSC0_MRST { 1, 0, 0, 0 } +#define LTQ_MUX_P0_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P0_0_SSC0_MTSR { 0, 0, 0, 0 } +#define LTQ_MUX_P0_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P0_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P1_19_PCM3_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_19_EXINT15 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_19 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_18_PCM3_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_18_EXINT11 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_18 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_17_PCM3_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_17_EXINT12 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_17 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_16_PCM3_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_16_EXINT13 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_16 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_15_PCM3_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_15_EXINT14 { 1, 0, 1, 0 } +#define LTQ_MUX_P1_15 { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_14_PCM2_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_13_PCM2_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_12_PCM2_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_11_PCM2_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_10_PCM2_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_9_PCM1_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_9_IN { 0, 0, 1, 0 } + +#define LTQ_MUX_P1_8_PCM1_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_7_PCM1_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_6_PCM1_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_5_PCM1_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_4_PCM0_TC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P1_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_3_PCM0_FSC { 0, 0, 0, 0 } +#define LTQ_MUX_P1_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_2_PCM0_PCL { 0, 0, 0, 0 } +#define LTQ_MUX_P1_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_1_PCM0_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P1_0_PCM0_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P1_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P1_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P2_18_EBU_BC1 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_17_EBU_BC0 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_17 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_17_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_16_EBU_RDBY { 1, 0, 0, 0 } +#define LTQ_MUX_P2_16 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_16_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_15_EBU_WAIT { 1, 0, 0, 0 } +#define LTQ_MUX_P2_15 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_15_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_14_EBU_ALE { 0, 0, 0, 0 } +#define LTQ_MUX_P2_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_13_EBU_WR { 0, 0, 0, 0 } +#define LTQ_MUX_P2_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_12_EBU_RD { 0, 0, 0, 0 } +#define LTQ_MUX_P2_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_11_EBU_A11 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_10_EBU_A10 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_9_EBU_A9 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_9_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_8_EBU_A8 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_7_EBU_A7 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_6_EBU_A6 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_5_EBU_A5 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_4_EBU_A4 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_3_EBU_A3 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_2_EBU_A2 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_1_EBU_A1 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P2_0_EBU_A0 { 0, 0, 0, 0 } +#define LTQ_MUX_P2_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P2_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P3_19_EBU_CS3 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_19 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_19_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_18_EBU_CS2 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_17_EBU_CS1 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_17 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_17_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_16_EBU_CS0 { 0, 0, 0, 0 } +#define LTQ_MUX_P3_16 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_16_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_15_EBU_AD15 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_15 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_15_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_14_EBU_AD14 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_13_EBU_AD13 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_12_EBU_AD12 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_11_EBU_AD11 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_10_EBU_AD10 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_9_EBU_AD9 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_9_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_8_EBU_AD8 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_7_EBU_AD7 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_6_EBU_AD6 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_5_EBU_AD5 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_4_EBU_AD4 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_3_EBU_AD3 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_2_EBU_AD2 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_1_EBU_AD1 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P3_0_EBU_AD0 { 1, 0, 0, 0 } +#define LTQ_MUX_P3_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P3_0_IN { 1, 0, 1, 0 } + + +#define LTQ_MUX_P4_23_SSLIC7_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_23 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_23_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_22_SSLIC7_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_22 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_22_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_21_SSLIC7_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_21 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_21_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_20_SSLIC6_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_20 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_20_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_19_SSLIC6_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_19 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_19_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_18_SSLIC6_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_18 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_18_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_17_SSLIC5_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_17 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_17_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_16_SSLIC5_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_16 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_16_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_15_SSLIC5_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_15 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_15_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_14_SSLIC4_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_14 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_14_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_13_SSLIC4_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_13 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_13_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_12_SSLIC4_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_12 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_12_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_11_SSLIC3_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_11 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_11_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_10_SSLIC3_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_10 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_10_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_9_SSLIC3_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_9 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_9_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_8_SSLIC2_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_8 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_8_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_7_SSLIC2_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_7 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_7_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_6_SSLIC2_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_6 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_6_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_5_SSLIC1_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_5 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_5_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_4_SSLIC1_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_4 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_4_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_3_SSLIC1_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_3 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_3_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_2_SSLIC0_CLK { 0, 0, 0, 0 } +#define LTQ_MUX_P4_2 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_2_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_1_SSLIC0_RX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_1 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_1_IN { 1, 0, 1, 0 } + +#define LTQ_MUX_P4_0_SSLIC0_TX { 0, 0, 0, 0 } +#define LTQ_MUX_P4_0 { 0, 0, 1, 0 } +#define LTQ_MUX_P4_0_IN { 1, 0, 1, 0 } + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h new file mode 100644 index 0000000000..7329711858 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/svip_pms.h @@ -0,0 +1,23 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#ifndef __SVIP_PMS_H +#define __SVIP_PMS_H + +void svip_sys1_clk_enable(u32 mask); +int svip_sys1_clk_is_enabled(u32 mask); + +void svip_sys2_clk_enable(u32 mask); +int svip_sys2_clk_is_enabled(u32 mask); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h new file mode 100644 index 0000000000..7428cccc87 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys0_reg.h @@ -0,0 +1,165 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SYS0_REG_H +#define __SYS0_REG_H + +#define sys0_r32(reg) ltq_r32(&sys0->reg) +#define sys0_w32(val, reg) ltq_w32(val, &sys0->reg) +#define sys0_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys0->reg) + +/** SYS0 register structure */ +struct svip_reg_sys0 { + unsigned long sr; /* 0x0000 */ + unsigned long bcr; /* 0x0004 */ + unsigned long pll1cr; /* 0x0008 */ + unsigned long pll2cr; /* 0x000c */ + unsigned long tscr; /* 0x0010 */ + unsigned long phyclkr; /* 0x0014 */ +}; + +/******************************************************************************* + * SYS0 Status Register + ******************************************************************************/ + +/* Endian select pin (31) */ +#define SYS0_SR_ESEL (0x1 << 31) +#define SYS0_SR_ESEL_GET(val) ((((val) & SYS0_SR_ESEL) >> 31) & 0x1) +/* Boot mode pins (27:24) */ +#define SYS0_SR_BMODE (0xf << 24) +#define SYS0_SR_BMODE_GET(val) ((((val) & SYS0_SR_BMODE) >> 24) & 0xf) +/* PLL2 Lock (18) */ +#define SYS0_SR_PLL2LOCK (0x1 << 18) +#define SYS0_SR_PLL2LOCK_GET(val) ((((val) & SYS0_SR_PLL2LOCK) >> 18) & 0x1) +/* PLL1 Lock (17) */ +#define SYS0_SR_PLL1LOCK (0x1 << 17) +#define SYS0_SR_PLL1LOCK_GET(val) ((((val) & SYS0_SR_PLL1LOCK) >> 17) & 0x1) +/* Discrete Timing Oscillator Lock (16) */ +#define SYS0_SR_DTOLOCK (0x1 << 16) +#define SYS0_SR_DTOLOCK_GET(val) ((((val) & SYS0_SR_DTOLOCK) >> 16) & 0x1) +/* Hardware Reset Indication (1) */ +#define SYS0_SR_HRSTIN (0x1 << 1) +#define SYS0_SR_HRSTIN_VAL(val) (((val) & 0x1) << 1) +#define SYS0_SR_HRSTIN_GET(val) ((((val) & SYS0_SR_HRSTIN) >> 1) & 0x1) +#define SYS0_SR_HRSTIN_SET(reg,val) (reg) = ((reg & ~SYS0_SR_HRSTIN) | (((val) & 0x1) << 1)) +/* Power-on Reset Indication (0) */ +#define SYS0_SR_POR (0x1 << 0) +#define SYS0_SR_POR_VAL(val) (((val) & 0x1) << 0) +#define SYS0_SR_POR_GET(val) ((((val) & SYS0_SR_POR) >> 0) & 0x1) +#define SYS0_SR_POR_SET(reg,val) (reg) = ((reg & ~SYS0_SR_POR) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SYS0 Boot Control Register + ******************************************************************************/ + +/* Configuration of Boot Source for CPU5 (25) */ +#define SYS0_BCR_BMODECPU5 (0x1 << 25) +#define SYS0_BCR_BMODECPU5_VAL(val) (((val) & 0x1) << 25) +#define SYS0_BCR_BMODECPU5_GET(val) ((((val) & SYS0_BCR_BMODECPU5) >> 25) & 0x1) +#define SYS0_BCR_BMODECPU5_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU5) | (((val) & 0x1) << 25)) +/* Configuration of Boot Source for CPU4 (24) */ +#define SYS0_BCR_BMODECPU4 (0x1 << 24) +#define SYS0_BCR_BMODECPU4_VAL(val) (((val) & 0x1) << 24) +#define SYS0_BCR_BMODECPU4_GET(val) ((((val) & SYS0_BCR_BMODECPU4) >> 24) & 0x1) +#define SYS0_BCR_BMODECPU4_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU4) | (((val) & 0x1) << 24)) +/* Configuration of Boot Source for CPU3 (23) */ +#define SYS0_BCR_BMODECPU3 (0x1 << 23) +#define SYS0_BCR_BMODECPU3_VAL(val) (((val) & 0x1) << 23) +#define SYS0_BCR_BMODECPU3_GET(val) ((((val) & SYS0_BCR_BMODECPU3) >> 23) & 0x1) +#define SYS0_BCR_BMODECPU3_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU3) | (((val) & 0x1) << 23)) +/* Configuration of Boot Source for CPU2 (22) */ +#define SYS0_BCR_BMODECPU2 (0x1 << 22) +#define SYS0_BCR_BMODECPU2_VAL(val) (((val) & 0x1) << 22) +#define SYS0_BCR_BMODECPU2_GET(val) ((((val) & SYS0_BCR_BMODECPU2) >> 22) & 0x1) +#define SYS0_BCR_BMODECPU2_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU2) | (((val) & 0x1) << 22)) +/* Configuration of Boot Source for CPU1 (21) */ +#define SYS0_BCR_BMODECPU1 (0x1 << 21) +#define SYS0_BCR_BMODECPU1_VAL(val) (((val) & 0x1) << 21) +#define SYS0_BCR_BMODECPU1_GET(val) ((((val) & SYS0_BCR_BMODECPU1) >> 21) & 0x1) +#define SYS0_BCR_BMODECPU1_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU1) | (((val) & 0x1) << 21)) +/* Configuration of Boot Source for CPU0 (20:16) */ +#define SYS0_BCR_BMODECPU0 (0x1f << 16) +#define SYS0_BCR_BMODECPU0_VAL(val) (((val) & 0x1f) << 16) +#define SYS0_BCR_BMODECPU0_GET(val) ((((val) & SYS0_BCR_BMODECPU0) >> 16) & 0x1f) +#define SYS0_BCR_BMODECPU0_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_BMODECPU0) | (((val) & 0x1f) << 16)) +/* Configuration of Endianess for CPU5 (5) */ +#define SYS0_BCR_ESELCPU5 (0x1 << 5) +#define SYS0_BCR_ESELCPU5_VAL(val) (((val) & 0x1) << 5) +#define SYS0_BCR_ESELCPU5_GET(val) ((((val) & SYS0_BCR_ESELCPU5) >> 5) & 0x1) +#define SYS0_BCR_ESELCPU5_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU5) | (((val) & 0x1) << 5)) +/* Configuration of Endianess for CPU4 (4) */ +#define SYS0_BCR_ESELCPU4 (0x1 << 4) +#define SYS0_BCR_ESELCPU4_VAL(val) (((val) & 0x1) << 4) +#define SYS0_BCR_ESELCPU4_GET(val) ((((val) & SYS0_BCR_ESELCPU4) >> 4) & 0x1) +#define SYS0_BCR_ESELCPU4_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU4) | (((val) & 0x1) << 4)) +/* Configuration of Endianess for CPU3 (3) */ +#define SYS0_BCR_ESELCPU3 (0x1 << 3) +#define SYS0_BCR_ESELCPU3_VAL(val) (((val) & 0x1) << 3) +#define SYS0_BCR_ESELCPU3_GET(val) ((((val) & SYS0_BCR_ESELCPU3) >> 3) & 0x1) +#define SYS0_BCR_ESELCPU3_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU3) | (((val) & 0x1) << 3)) +/* Configuration of Endianess for CPU2 (2) */ +#define SYS0_BCR_ESELCPU2 (0x1 << 2) +#define SYS0_BCR_ESELCPU2_VAL(val) (((val) & 0x1) << 2) +#define SYS0_BCR_ESELCPU2_GET(val) ((((val) & SYS0_BCR_ESELCPU2) >> 2) & 0x1) +#define SYS0_BCR_ESELCPU2_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU2) | (((val) & 0x1) << 2)) +/* Configuration of Endianess for CPU1 (1) */ +#define SYS0_BCR_ESELCPU1 (0x1 << 1) +#define SYS0_BCR_ESELCPU1_VAL(val) (((val) & 0x1) << 1) +#define SYS0_BCR_ESELCPU1_GET(val) ((((val) & SYS0_BCR_ESELCPU1) >> 1) & 0x1) +#define SYS0_BCR_ESELCPU1_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU1) | (((val) & 0x1) << 1)) +/* Configuration of Endianess for CPU0 (0) */ +#define SYS0_BCR_ESELCPU0 (0x1) +#define SYS0_BCR_ESELCPU0_VAL(val) (((val) & 0x1) << 0) +#define SYS0_BCR_ESELCPU0_GET(val) ((((val) & SYS0_BCR_ESELCPU0) >> 0) & 0x1) +#define SYS0_BCR_ESELCPU0_SET(reg,val) (reg) = ((reg & ~SYS0_BCR_ESELCPU0) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * PLL1 Control Register + ******************************************************************************/ + +/* PLL1 Bypass Enable (31) */ +#define SYS0_PLL1CR_OSCBYP (0x1 << 31) +#define SYS0_PLL1CR_OSCBYP_VAL(val) (((val) & 0x1) << 31) +#define SYS0_PLL1CR_OSCBYP_GET(val) ((((val) & SYS0_PLL1CR_OSCBYP) >> 31) & 0x1) +#define SYS0_PLL1CR_OSCBYP_SET(reg,val) (reg) = ((reg & ~SYS0_PLL1CR_OSCBYP) | (((val) & 0x1) << 31)) +/* PLL1 Divider Value (1:0) */ +#define SYS0_PLL1CR_PLLDIV (0x3) +#define SYS0_PLL1CR_PLLDIV_VAL(val) (((val) & 0x3) << 0) +#define SYS0_PLL1CR_PLLDIV_GET(val) ((((val) & SYS0_PLL1CR_PLLDIV) >> 0) & 0x3) +#define SYS0_PLL1CR_PLLDIV_SET(reg,val) (reg) = ((reg & ~SYS0_PLL1CR_PLLDIV) | (((val) & 0x3) << 0)) + +/******************************************************************************* + * PLL2 Control Register + ******************************************************************************/ + +/* PLL2 clear deepsleep (31) */ +#define SYS0_PLL2CR_CLRDS (0x1 << 31) +#define SYS0_PLL2CR_CLRDS_VAL(val) (((val) & 0x1) << 31) +#define SYS0_PLL2CR_CLRDS_GET(val) ((((val) & SYS0_PLL2CR_CLRDS) >> 31) & 0x1) +#define SYS0_PLL2CR_CLRDS_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_CLRDS) | (((val) & 0x1) << 31)) +/* PLL2 set deepsleep (30) */ +#define SYS0_PLL2CR_SETDS (0x1 << 30) +#define SYS0_PLL2CR_SETDS_VAL(val) (((val) & 0x1) << 30) +#define SYS0_PLL2CR_SETDS_GET(val) ((((val) & SYS0_PLL2CR_SETDS) >> 30) & 0x1) +#define SYS0_PLL2CR_SETDS_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_SETDS) | (((val) & 0x1) << 30)) +/* PLL2 Fractional division enable (16) */ +#define SYS0_PLL2CR_FRACTEN (0x1 << 16) +#define SYS0_PLL2CR_FRACTEN_VAL(val) (((val) & 0x1) << 16) +#define SYS0_PLL2CR_FRACTEN_GET(val) ((((val) & SYS0_PLL2CR_FRACTEN) >> 16) & 0x1) +#define SYS0_PLL2CR_FRACTEN_SET(reg,val) (reg) = ((reg & ~SYS0_PLL2CR_FRACTEN) | (((val) & 0x1) << 16)) +/* PLL2 Fractional division value (9:0) */ +#define SYS0_FRACTVAL (0x3f) +#define SYS0_FRACTVAL_VAL(val) (((val) & 0x3f) << 0) +#define SYS0_FRACTVAL_GET(val) ((((val) & SYS0_FRACTVAL) >> 0) & 0x3f) +#define SYS0_FRACTVAL_SET(reg,val) (reg) = ((reg & ~SYS0_FRACTVAL) | (((val) & 0x3f) << 0)) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h new file mode 100644 index 0000000000..e0c2e84b1a --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys1_reg.h @@ -0,0 +1,370 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SYS1_REG_H +#define __SYS1_REG_H + +#define sys1_r32(reg) ltq_r32(&sys1->reg) +#define sys1_w32(val, reg) ltq_w32(val, &sys1->reg) +#define sys1_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys1->reg) + +/** SYS1 register structure */ +struct svip_reg_sys1 { + unsigned long clksr; /* 0x0000 */ + unsigned long clkenr; /* 0x0004 */ + unsigned long clkclr; /* 0x0008 */ + unsigned long reserved0[1]; + unsigned long l2ccr; /* 0x0010 */ + unsigned long fpicr; /* 0x0014 */ + unsigned long wdtcr; /* 0x0018 */ + unsigned long reserved1[1]; + unsigned long cpucr[6]; /* 0x0020 */ + unsigned long reserved2[2]; + unsigned long rsr; /* 0x0040 */ + unsigned long rreqr; /* 0x0044 */ + unsigned long rrlsr; /* 0x0048 */ + unsigned long rbtr; /* 0x004c */ + unsigned long irncr; /* 0x0050 */ + unsigned long irnicr; /* 0x0054 */ + unsigned long irnen; /* 0x0058 */ + unsigned long reserved3[1]; + unsigned long cpursr[6]; /* 0x0060 */ + unsigned long reserved4[2]; + unsigned long cpusrssr[6]; /* 0x0080 */ + unsigned long reserved5[2]; + unsigned long cpuwrssr[6]; /* 0x00a0 */ +}; + +/******************************************************************************* + * SYS1 Clock Status Register + ******************************************************************************/ +/* (r) Clock Enable for L2C */ +#define SYS1_CLKSR_L2C (0x1 << 31) +/* (r) Clock Enable for DDR2 */ +#define SYS1_CLKSR_DDR2 (0x1 << 30) +/* (r) Clock Enable for SMI2 */ +#define SYS1_CLKSR_SMI2 (0x1 << 29) +/* (r) Clock Enable for SMI1 */ +#define SYS1_CLKSR_SMI1 (0x1 << 28) +/* (r) Clock Enable for SMI0 */ +#define SYS1_CLKSR_SMI0 (0x1 << 27) +/* (r) Clock Enable for FMI0 */ +#define SYS1_CLKSR_FMI0 (0x1 << 26) +/* (r) Clock Enable for PORT0 */ +#define SYS1_CLKSR_PORT0 (0x1 << 0) +/* (r) Clock Enable for PCM3 */ +#define SYS1_CLKSR_PCM3 (0x1 << 19) +/* (r) Clock Enable for PCM2 */ +#define SYS1_CLKSR_PCM2 (0x1 << 18) +/* (r) Clock Enable for PCM1 */ +#define SYS1_CLKSR_PCM1 (0x1 << 17) +/* (r) Clock Enable for PCM0 */ +#define SYS1_CLKSR_PCM0 (0x1 << 16) +/* (r) Clock Enable for ASC1 */ +#define SYS1_CLKSR_ASC1 (0x1 << 15) +/* (r) Clock Enable for ASC0 */ +#define SYS1_CLKSR_ASC0 (0x1 << 14) +/* (r) Clock Enable for SSC2 */ +#define SYS1_CLKSR_SSC2 (0x1 << 13) +/* (r) Clock Enable for SSC1 */ +#define SYS1_CLKSR_SSC1 (0x1 << 12) +/* (r) Clock Enable for SSC0 */ +#define SYS1_CLKSR_SSC0 (0x1 << 11) +/* (r) Clock Enable for GPTC */ +#define SYS1_CLKSR_GPTC (0x1 << 10) +/* (r) Clock Enable for DMA */ +#define SYS1_CLKSR_DMA (0x1 << 9) +/* (r) Clock Enable for FSCT */ +#define SYS1_CLKSR_FSCT (0x1 << 8) +/* (r) Clock Enable for ETHSW */ +#define SYS1_CLKSR_ETHSW (0x1 << 7) +/* (r) Clock Enable for EBU */ +#define SYS1_CLKSR_EBU (0x1 << 6) +/* (r) Clock Enable for TRNG */ +#define SYS1_CLKSR_TRNG (0x1 << 5) +/* (r) Clock Enable for DEU */ +#define SYS1_CLKSR_DEU (0x1 << 4) +/* (r) Clock Enable for PORT3 */ +#define SYS1_CLKSR_PORT3 (0x1 << 3) +/* (r) Clock Enable for PORT2 */ +#define SYS1_CLKSR_PORT2 (0x1 << 2) +/* (r) Clock Enable for PORT1 */ +#define SYS1_CLKSR_PORT1 (0x1 << 1) + +/******************************************************************************* + * SYS1 Clock Enable Register + ******************************************************************************/ +/* (w) Clock Enable Request for L2C */ +#define SYS1_CLKENR_L2C (0x1 << 31) +/* (w) Clock Enable Request for DDR2 */ +#define SYS1_CLKENR_DDR2 (0x1 << 30) +/* (w) Clock Enable Request for SMI2 */ +#define SYS1_CLKENR_SMI2 (0x1 << 29) +/* (w) Clock Enable Request for SMI1 */ +#define SYS1_CLKENR_SMI1 (0x1 << 28) +/* (w) Clock Enable Request for SMI0 */ +#define SYS1_CLKENR_SMI0 (0x1 << 27) +/* (w) Clock Enable Request for FMI0 */ +#define SYS1_CLKENR_FMI0 (0x1 << 26) +/* (w) Clock Enable Request for PORT0 */ +#define SYS1_CLKENR_PORT0 (0x1 << 0) +/* (w) Clock Enable Request for PCM3 */ +#define SYS1_CLKENR_PCM3 (0x1 << 19) +/* (w) Clock Enable Request for PCM2 */ +#define SYS1_CLKENR_PCM2 (0x1 << 18) +/* (w) Clock Enable Request for PCM1 */ +#define SYS1_CLKENR_PCM1 (0x1 << 17) +/* (w) Clock Enable Request for PCM0 */ +#define SYS1_CLKENR_PCM0 (0x1 << 16) +/* (w) Clock Enable Request for ASC1 */ +#define SYS1_CLKENR_ASC1 (0x1 << 15) +/* (w) Clock Enable Request for ASC0 */ +#define SYS1_CLKENR_ASC0 (0x1 << 14) +/* (w) Clock Enable Request for SSC2 */ +#define SYS1_CLKENR_SSC2 (0x1 << 13) +/* (w) Clock Enable Request for SSC1 */ +#define SYS1_CLKENR_SSC1 (0x1 << 12) +/* (w) Clock Enable Request for SSC0 */ +#define SYS1_CLKENR_SSC0 (0x1 << 11) +/* (w) Clock Enable Request for GPTC */ +#define SYS1_CLKENR_GPTC (0x1 << 10) +/* (w) Clock Enable Request for DMA */ +#define SYS1_CLKENR_DMA (0x1 << 9) +/* (w) Clock Enable Request for FSCT */ +#define SYS1_CLKENR_FSCT (0x1 << 8) +/* (w) Clock Enable Request for ETHSW */ +#define SYS1_CLKENR_ETHSW (0x1 << 7) +/* (w) Clock Enable Request for EBU */ +#define SYS1_CLKENR_EBU (0x1 << 6) +/* (w) Clock Enable Request for TRNG */ +#define SYS1_CLKENR_TRNG (0x1 << 5) +/* (w) Clock Enable Request for DEU */ +#define SYS1_CLKENR_DEU (0x1 << 4) +/* (w) Clock Enable Request for PORT3 */ +#define SYS1_CLKENR_PORT3 (0x1 << 3) +/* (w) Clock Enable Request for PORT2 */ +#define SYS1_CLKENR_PORT2 (0x1 << 2) +/* (w) Clock Enable Request for PORT1 */ +#define SYS1_CLKENR_PORT1 (0x1 << 1) + +/******************************************************************************* + * SYS1 Clock Clear Register + ******************************************************************************/ +/* (w) Clock Disable Request for L2C */ +#define SYS1_CLKCLR_L2C (0x1 << 31) +/* (w) Clock Disable Request for DDR2 */ +#define SYS1_CLKCLR_DDR2 (0x1 << 30) +/* (w) Clock Disable Request for SMI2 */ +#define SYS1_CLKCLR_SMI2 (0x1 << 29) +/* (w) Clock Disable Request for SMI1 */ +#define SYS1_CLKCLR_SMI1 (0x1 << 28) +/* (w) Clock Disable Request for SMI0 */ +#define SYS1_CLKCLR_SMI0 (0x1 << 27) +/* (w) Clock Disable Request for FMI0 */ +#define SYS1_CLKCLR_FMI0 (0x1 << 26) +/* (w) Clock Disable Request for PORT0 */ +#define SYS1_CLKCLR_PORT0 (0x1 << 0) +/* (w) Clock Disable Request for PCM3 */ +#define SYS1_CLKCLR_PCM3 (0x1 << 19) +/* (w) Clock Disable Request for PCM2 */ +#define SYS1_CLKCLR_PCM2 (0x1 << 18) +/* (w) Clock Disable Request for PCM1 */ +#define SYS1_CLKCLR_PCM1 (0x1 << 17) +/* (w) Clock Disable Request for PCM0 */ +#define SYS1_CLKCLR_PCM0 (0x1 << 16) +/* (w) Clock Disable Request for ASC1 */ +#define SYS1_CLKCLR_ASC1 (0x1 << 15) +/* (w) Clock Disable Request for ASC0 */ +#define SYS1_CLKCLR_ASC0 (0x1 << 14) +/* (w) Clock Disable Request for SSC2 */ +#define SYS1_CLKCLR_SSC2 (0x1 << 13) +/* (w) Clock Disable Request for SSC1 */ +#define SYS1_CLKCLR_SSC1 (0x1 << 12) +/* (w) Clock Disable Request for SSC0 */ +#define SYS1_CLKCLR_SSC0 (0x1 << 11) +/* (w) Clock Disable Request for GPTC */ +#define SYS1_CLKCLR_GPTC (0x1 << 10) +/* (w) Clock Disable Request for DMA */ +#define SYS1_CLKCLR_DMA (0x1 << 9) +/* (w) Clock Disable Request for FSCT */ +#define SYS1_CLKCLR_FSCT (0x1 << 8) +/* (w) Clock Disable Request for ETHSW */ +#define SYS1_CLKCLR_ETHSW (0x1 << 7) +/* (w) Clock Disable Request for EBU */ +#define SYS1_CLKCLR_EBU (0x1 << 6) +/* (w) Clock Disable Request for TRNG */ +#define SYS1_CLKCLR_TRNG (0x1 << 5) +/* (w) Clock Disable Request for DEU */ +#define SYS1_CLKCLR_DEU (0x1 << 4) +/* (w) Clock Disable Request for PORT3 */ +#define SYS1_CLKCLR_PORT3 (0x1 << 3) +/* (w) Clock Disable Request for PORT2 */ +#define SYS1_CLKCLR_PORT2 (0x1 << 2) +/* (w) Clock Disable Request for PORT1 */ +#define SYS1_CLKCLR_PORT1 (0x1 << 1) + +/******************************************************************************* + * SYS1 FPI Control Register + ******************************************************************************/ + +/* FPI Bus Clock divider (0) */ +#define SYS1_FPICR_FPIDIV (0x1) +#define SYS1_FPICR_FPIDIV_VAL(val) (((val) & 0x1) << 0) +#define SYS1_FPICR_FPIDIV_GET(val) ((((val) & SYS1_FPICR_FPIDIV) >> 0) & 0x1) +#define SYS1_FPICR_FPIDIV_SET(reg,val) (reg) = ((reg & ~SYS1_FPICR_FPIDIV) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SYS1 Clock Control Register for CPUn + ******************************************************************************/ + +/* Enable bit for clock of CPUn (1) */ +#define SYS1_CPUCR_CPUCLKEN (0x1 << 1) +#define SYS1_CPUCR_CPUCLKEN_VAL(val) (((val) & 0x1) << 1) +#define SYS1_CPUCR_CPUCLKEN_GET(val) ((((val) & SYS1_CPUCR_CPUCLKEN) >> 1) & 0x1) +#define SYS1_CPUCR_CPUCLKEN_SET(reg,val) (reg) = ((reg & ~SYS1_CPUCR_CPUCLKEN) | (((val) & 0x1) << 1)) +/* Divider factor for clock of CPUn (0) */ +#define SYS1_CPUCR_CPUDIV (0x1) +#define SYS1_CPUCR_CPUDIV_VAL(val) (((val) & 0x1) << 0) +#define SYS1_CPUCR_CPUDIV_GET(val) ((((val) & SYS1_CPUCR_CPUDIV) >> 0) & 0x1) +#define SYS1_CPUCR_CPUDIV_SET(reg,val) (reg) = ((reg & ~SYS1_CPUCR_CPUDIV) | (((val) & 0x1) << 0)) + +/******************************************************************************* + * SYS1 Reset Request Register + ******************************************************************************/ + +/* HRSTOUT Reset Request (18) */ +#define SYS1_RREQ_HRSTOUT (0x1 << 18) +#define SYS1_RREQ_HRSTOUT_VAL(val) (((val) & 0x1) << 18) +#define SYS1_RREQ_HRSTOUT_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_HRSTOUT) | (((val) & 1) << 18)) + /* FBS0 Reset Request (17) */ +#define SYS1_RREQ_FBS0 (0x1 << 17) +#define SYS1_RREQ_FBS0_VAL(val) (((val) & 0x1) << 17) +#define SYS1_RREQ_FBS0_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_FBS0) | (((val) & 1) << 17)) + /* SUBSYS Reset Request (16) */ +#define SYS1_RREQ_SUBSYS (0x1 << 16) +#define SYS1_RREQ_SUBSYS_VAL(val) (((val) & 0x1) << 16) +#define SYS1_RREQ_SUBSYS_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_SUBSYS) | (((val) & 1) << 16)) + /* Watchdog5 Reset Request (13) */ +#define SYS1_RREQ_WDT5 (0x1 << 13) +#define SYS1_RREQ_WDT5_VAL(val) (((val) & 0x1) << 13) +#define SYS1_RREQ_WDT5_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT5) | (((val) & 1) << 13)) + /* Watchdog4 Reset Request (12) */ +#define SYS1_RREQ_WDT4 (0x1 << 12) +#define SYS1_RREQ_WDT4_VAL(val) (((val) & 0x1) << 12) +#define SYS1_RREQ_WDT4_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT4) | (((val) & 1) << 12)) + /* Watchdog3 Reset Request (11) */ +#define SYS1_RREQ_WDT3 (0x1 << 11) +#define SYS1_RREQ_WDT3_VAL(val) (((val) & 0x1) << 11) +#define SYS1_RREQ_WDT3_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT3) | (((val) & 1) << 11)) + /* Watchdog2 Reset Request (10) */ +#define SYS1_RREQ_WDT2 (0x1 << 10) +#define SYS1_RREQ_WDT2_VAL(val) (((val) & 0x1) << 10) +#define SYS1_RREQ_WDT2_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT2) | (((val) & 1) << 10)) + /* Watchdog1 Reset Request (9) */ +#define SYS1_RREQ_WDT1 (0x1 << 9) +#define SYS1_RREQ_WDT1_VAL(val) (((val) & 0x1) << 9) +#define SYS1_RREQ_WDT1_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT1) | (((val) & 1) << 9)) + /* Watchdog0 Reset Request (8) */ +#define SYS1_RREQ_WDT0 (0x1 << 8) +#define SYS1_RREQ_WDT0_VAL(val) (((val) & 0x1) << 8) +#define SYS1_RREQ_WDT0_SET(reg,val) (reg) = (((reg & ~SYS1_RREQ_WDT0) | (((val) & 1) << 8)) + /* CPU5 Reset Request (5) */ +#define SYS1_RREQ_CPU5 (0x1 << 5) +#define SYS1_RREQ_CPU5_VAL(val) (((val) & 0x1) << 5) +#define SYS1_RREQ_CPU5_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU5) | (((val) & 1) << 5)) + /* CPU4 Reset Request (4) */ +#define SYS1_RREQ_CPU4 (0x1 << 4) +#define SYS1_RREQ_CPU4_VAL(val) (((val) & 0x1) << 4) +#define SYS1_RREQ_CPU4_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU4) | (((val) & 1) << 4)) + /* CPU3 Reset Request (3) */ +#define SYS1_RREQ_CPU3 (0x1 << 3) +#define SYS1_RREQ_CPU3_VAL(val) (((val) & 0x1) << 3) +#define SYS1_RREQ_CPU3_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU3) | (((val) & 1) << 3)) + /* CPU2 Reset Request (2) */ +#define SYS1_RREQ_CPU2 (0x1 << 2) +#define SYS1_RREQ_CPU2_VAL(val) (((val) & 0x1) << 2) +#define SYS1_RREQ_CPU2_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU2) | (((val) & 1) << 2)) + /* CPU1 Reset Request (1) */ +#define SYS1_RREQ_CPU1 (0x1 << 1) +#define SYS1_RREQ_CPU1_VAL(val) (((val) & 0x1) << 1) +#define SYS1_RREQ_CPU1_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU1) | (((val) & 1) << 1)) +/* CPU0 Reset Request (0) */ +#define SYS1_RREQ_CPU0 (0x1) +#define SYS1_RREQ_CPU0_VAL(val) (((val) & 0x1) << 0) +#define SYS1_RREQ_CPU0_SET(reg,val) (reg) = ((reg & ~SYS1_RREQ_CPU0) | (((val) & 1) << 0)) + +/******************************************************************************* + * SYS1 Reset Release Register + ******************************************************************************/ + +/* HRSTOUT Reset Release (18) */ +#define SYS1_RRLSR_HRSTOUT (0x1 << 18) +#define SYS1_RRLSR_HRSTOUT_VAL(val) (((val) & 0x1) << 18) +#define SYS1_RRLSR_HRSTOUT_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_HRSTOUT) | (((val) & 1) << 18)) +/* FBS0 Reset Release (17) */ +#define SYS1_RRLSR_FBS0 (0x1 << 17) +#define SYS1_RRLSR_FBS0_VAL(val) (((val) & 0x1) << 17) +#define SYS1_RRLSR_FBS0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_FBS0) | (((val) & 1) << 17)) +/* SUBSYS Reset Release (16) */ +#define SYS1_RRLSR_SUBSYS (0x1 << 16) +#define SYS1_RRLSR_SUBSYS_VAL(val) (((val) & 0x1) << 16) +#define SYS1_RRLSR_SUBSYS_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_SUBSYS) | (((val) & 1) << 16)) +/* Watchdog5 Reset Release (13) */ +#define SYS1_RRLSR_WDT5 (0x1 << 13) +#define SYS1_RRLSR_WDT5_VAL(val) (((val) & 0x1) << 13) +#define SYS1_RRLSR_WDT5_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT5) | (((val) & 1) << 13)) +/* Watchdog4 Reset Release (12) */ +#define SYS1_RRLSR_WDT4 (0x1 << 12) +#define SYS1_RRLSR_WDT4_VAL(val) (((val) & 0x1) << 12) +#define SYS1_RRLSR_WDT4_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT4) | (((val) & 1) << 12)) +/* Watchdog3 Reset Release (11) */ +#define SYS1_RRLSR_WDT3 (0x1 << 11) +#define SYS1_RRLSR_WDT3_VAL(val) (((val) & 0x1) << 11) +#define SYS1_RRLSR_WDT3_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT3) | (((val) & 1) << 11)) +/* Watchdog2 Reset Release (10) */ +#define SYS1_RRLSR_WDT2 (0x1 << 10) +#define SYS1_RRLSR_WDT2_VAL(val) (((val) & 0x1) << 10) +#define SYS1_RRLSR_WDT2_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT2) | (((val) & 1) << 10)) +/* Watchdog1 Reset Release (9) */ +#define SYS1_RRLSR_WDT1 (0x1 << 9) +#define SYS1_RRLSR_WDT1_VAL(val) (((val) & 0x1) << 9) +#define SYS1_RRLSR_WDT1_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT1) | (((val) & 1) << 9)) +/* Watchdog0 Reset Release (8) */ +#define SYS1_RRLSR_WDT0 (0x1 << 8) +#define SYS1_RRLSR_WDT0_VAL(val) (((val) & 0x1) << 8) +#define SYS1_RRLSR_WDT0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_WDT0) | (((val) & 1) << 8)) +/* CPU5 Reset Release (5) */ +#define SYS1_RRLSR_CPU5 (0x1 << 5) +#define SYS1_RRLSR_CPU5_VAL(val) (((val) & 0x1) << 5) +#define SYS1_RRLSR_CPU5_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU5) | (((val) & 1) << 5)) +/* CPU4 Reset Release (4) */ +#define SYS1_RRLSR_CPU4 (0x1 << 4) +#define SYS1_RRLSR_CPU4_VAL(val) (((val) & 0x1) << 4) +#define SYS1_RRLSR_CPU4_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU4) | (((val) & 1) << 4)) +/* CPU3 Reset Release (3) */ +#define SYS1_RRLSR_CPU3 (0x1 << 3) +#define SYS1_RRLSR_CPU3_VAL(val) (((val) & 0x1) << 3) +#define SYS1_RRLSR_CPU3_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU3) | (((val) & 1) << 3)) +/* CPU2 Reset Release (2) */ +#define SYS1_RRLSR_CPU2 (0x1 << 2) +#define SYS1_RRLSR_CPU2_VAL(val) (((val) & 0x1) << 2) +#define SYS1_RRLSR_CPU2_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU2) | (((val) & 1) << 2)) +/* CPU1 Reset Release (1) */ +#define SYS1_RRLSR_CPU1 (0x1 << 1) +#define SYS1_RRLSR_CPU1_VAL(val) (((val) & 0x1) << 1) +#define SYS1_RRLSR_CPU1_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU1) | (((val) & 1) << 1)) +/* CPU0 Reset Release (0) */ +#define SYS1_RRLSR_CPU0 (0x1) +#define SYS1_RRLSR_CPU0_VAL(val) (((val) & 0x1) << 0) +#define SYS1_RRLSR_CPU0_SET(reg,val) (reg) = ((reg & ~SYS1_RRLSR_CPU0) | (((val) & 1) << 0)) + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h new file mode 100644 index 0000000000..ff9f04b4d7 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/include/asm/mach-lantiq/svip/sys2_reg.h @@ -0,0 +1,494 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + St. Martin Strasse 53; 81669 Munich, Germany + + Any use of this Software is subject to the conclusion of a respective + License Agreement. Without such a License Agreement no rights to the + Software are granted. + + ******************************************************************************/ + +#ifndef __SYS2_REG_H +#define __SYS2_REG_H + +#define sys2_r32(reg) ltq_r32(&sys2->reg) +#define sys2_w32(val, reg) ltq_w32(val, &sys2->reg) +#define sys2_w32_mask(clear, set, reg) ltq_w32_mask(clear, set, &sys2->reg) + +/** SYS2 register structure */ +struct svip_reg_sys2 { + volatile unsigned long clksr; /* 0x0000 */ + volatile unsigned long clkenr; /* 0x0004 */ + volatile unsigned long clkclr; /* 0x0008 */ + volatile unsigned long reserved0[1]; + volatile unsigned long rsr; /* 0x0010 */ + volatile unsigned long rreqr; /* 0x0014 */ + volatile unsigned long rrlsr; /* 0x0018 */ +}; + +/******************************************************************************* + * SYS2 Clock Status Register + ******************************************************************************/ + +/* Clock Enable for PORT4 */ +#define SYS2_CLKSR_PORT4 (0x1 << 27) +#define SYS2_CLKSR_PORT4_VAL(val) (((val) & 0x1) << 27) +#define SYS2_CLKSR_PORT4_GET(val) (((val) & SYS2_CLKSR_PORT4) >> 27) +/* Clock Enable for HWSYNC */ +#define SYS2_CLKSR_HWSYNC (0x1 << 26) +#define SYS2_CLKSR_HWSYNC_VAL(val) (((val) & +#define SYS2_CLKSR_HWSYNC_GET(val) (((val) & SYS2_CLKSR_HWSYNC) >> 26) + /* Clock Enable for MBS */ +#define SYS2_CLKSR_MBS (0x1 << 25) +#define SYS2_CLKSR_MBS_VAL(val) (((val) & 0x1) << 25) +#define SYS2_CLKSR_MBS_GET(val) (((val) & SYS2_CLKSR_MBS) >> 25) + /* Clock Enable for SWINT */ +#define SYS2_CLKSR_SWINT (0x1 << 24) +#define SYS2_CLKSR_SWINT_VAL(val) (((val) & 0x1) << 24) +#define SYS2_CLKSR_SWINT_GET(val) (((val) & SYS2_CLKSR_SWINT) >> 24) + /* Clock Enable for HWACC3 */ +#define SYS2_CLKSR_HWACC3 (0x1 << 19) +#define SYS2_CLKSR_HWACC3_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC3_GET(val) (((val) & SYS2_CLKSR_HWACC3) >> 19) + /* Clock Enable for HWACC2 */ +#define SYS2_CLKSR_HWACC2 (0x1 << 18) +#define SYS2_CLKSR_HWACC2_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC2_GET(val) (((val) & SYS2_CLKSR_HWACC2) >> 18) + /* Clock Enable for HWACC1 */ +#define SYS2_CLKSR_HWACC1 (0x1 << 17) +#define SYS2_CLKSR_HWACC1_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC1_GET(val) (((val) & SYS2_CLKSR_HWACC1) >> 17) + /* Clock Enable for HWACC0 */ +#define SYS2_CLKSR_HWACC0 (0x1 << 16) +#define SYS2_CLKSR_HWACC0_VAL(val) (((val) & +#define SYS2_CLKSR_HWACC0_GET(val) (((val) & SYS2_CLKSR_HWACC0) >> 16) + /* Clock Enable for SIF7 */ +#define SYS2_CLKSR_SIF7 (0x1 << 15) +#define SYS2_CLKSR_SIF7_VAL(val) (((val) & 0x1) << 15) +#define SYS2_CLKSR_SIF7_GET(val) (((val) & SYS2_CLKSR_SIF7) >> 15) + /* Clock Enable for SIF6 */ +#define SYS2_CLKSR_SIF6 (0x1 << 14) +#define SYS2_CLKSR_SIF6_VAL(val) (((val) & 0x1) << 14) +#define SYS2_CLKSR_SIF6_GET(val) (((val) & SYS2_CLKSR_SIF6) >> 14) + /* Clock Enable for SIF5 */ +#define SYS2_CLKSR_SIF5 (0x1 << 13) +#define SYS2_CLKSR_SIF5_VAL(val) (((val) & 0x1) << 13) +#define SYS2_CLKSR_SIF5_GET(val) (((val) & SYS2_CLKSR_SIF5) >> 13) + /* Clock Enable for SIF4 */ +#define SYS2_CLKSR_SIF4 (0x1 << 12) +#define SYS2_CLKSR_SIF4_VAL(val) (((val) & 0x1) << 12) +#define SYS2_CLKSR_SIF4_GET(val) (((val) & SYS2_CLKSR_SIF4) >> 12) + /* Clock Enable for SIF3 */ +#define SYS2_CLKSR_SIF3 (0x1 << 11) +#define SYS2_CLKSR_SIF3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_CLKSR_SIF3_GET(val) (((val) & SYS2_CLKSR_SIF3) >> 11) +/* Clock Enable for SIF2 */ +#define SYS2_CLKSR_SIF2 (0x1 << 10) +#define SYS2_CLKSR_SIF2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_CLKSR_SIF2_GET(val) (((val) & SYS2_CLKSR_SIF2) >> 10) +/* Clock Enable for SIF1 */ +#define SYS2_CLKSR_SIF1 (0x1 << 9) +#define SYS2_CLKSR_SIF1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_CLKSR_SIF1_GET(val) (((val) & SYS2_CLKSR_SIF1) >> 9) +/* Clock Enable for SIF0 */ +#define SYS2_CLKSR_SIF0 (0x1 << 8) +#define SYS2_CLKSR_SIF0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_CLKSR_SIF0_GET(val) (((val) & SYS2_CLKSR_SIF0) >> 8) +/* Clock Enable for DFEV7 */ +#define SYS2_CLKSR_DFEV7 (0x1 << 7) +#define SYS2_CLKSR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_CLKSR_DFEV7_GET(val) (((val) & SYS2_CLKSR_DFEV7) >> 7) +/* Clock Enable for DFEV6 */ +#define SYS2_CLKSR_DFEV6 (0x1 << 6) +#define SYS2_CLKSR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_CLKSR_DFEV6_GET(val) (((val) & SYS2_CLKSR_DFEV6) >> 6) +/* Clock Enable for DFEV5 */ +#define SYS2_CLKSR_DFEV5 (0x1 << 5) +#define SYS2_CLKSR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_CLKSR_DFEV5_GET(val) (((val) & SYS2_CLKSR_DFEV5) >> 5) +/* Clock Enable for DFEV4 */ +#define SYS2_CLKSR_DFEV4 (0x1 << 4) +#define SYS2_CLKSR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_CLKSR_DFEV4_GET(val) (((val) & SYS2_CLKSR_DFEV4) >> 4) +/* Clock Enable for DFEV3 */ +#define SYS2_CLKSR_DFEV3 (0x1 << 3) +#define SYS2_CLKSR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_CLKSR_DFEV3_GET(val) (((val) & SYS2_CLKSR_DFEV3) >> 3) +/* Clock Enable for DFEV2 */ +#define SYS2_CLKSR_DFEV2 (0x1 << 2) +#define SYS2_CLKSR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_CLKSR_DFEV2_GET(val) (((val) & SYS2_CLKSR_DFEV2) >> 2) +/* Clock Enable for DFEV1 */ +#define SYS2_CLKSR_DFEV1 (0x1 << 1) +#define SYS2_CLKSR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_CLKSR_DFEV1_GET(val) (((val) & SYS2_CLKSR_DFEV1) >> 1) +/* Clock Enable for DFEV0 */ +#define SYS2_CLKSR_DFEV0 (0x1) +#define SYS2_CLKSR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_CLKSR_DFEV0_GET(val) ((val) & SYS2_CLKSR_DFEV0) + +/******************************************************************************* + * SYS2 Clock Enable Register + ******************************************************************************/ + +/* Clock Enable Request for PORT4 */ +#define SYS2_CLKENR_PORT4 (0x1 << 27) +#define SYS2_CLKENR_PORT4_VAL(val) (((val) & 0x1) << 27) +#define SYS2_CLKENR_PORT4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_PORT4) | ((val & 0x1) << 27)) +/* Clock Enable Request for HWSYNC */ +#define SYS2_CLKENR_HWSYNC (0x1 << 26) +#define SYS2_CLKENR_HWSYNC_VAL(val) (((val) & 0x1) << 26) +#define SYS2_CLKENR_HWSYNC_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWSYNC) | ((val & 0x1) << 26)) +/* Clock Enable Request for MBS */ +#define SYS2_CLKENR_MBS (0x1 << 25) +#define SYS2_CLKENR_MBS_VAL(val) (((val) & 0x1) << 25) +#define SYS2_CLKENR_MBS_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_MBS) | ((val & 0x1) << 25)) +/* Clock Enable Request for SWINT */ +#define SYS2_CLKENR_SWINT (0x1 << 24) +#define SYS2_CLKENR_SWINT_VAL(val) (((val) & 0x1) << 24) +#define SYS2_CLKENR_SWINT_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SWINT) | ((val & 0x1) << 24)) +/* Clock Enable Request for HWACC3 */ +#define SYS2_CLKENR_HWACC3 (0x1 << 19) +#define SYS2_CLKENR_HWACC3_VAL(val) (((val) & 0x1) << 19) +#define SYS2_CLKENR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC3) | ((val & 0x1) << 19)) +/* Clock Enable Request for HWACC2 */ +#define SYS2_CLKENR_HWACC2 (0x1 << 18) +#define SYS2_CLKENR_HWACC2_VAL(val) (((val) & 0x1) << 18) +#define SYS2_CLKENR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC2) | ((val & 0x1) << 18)) +/* Clock Enable Request for HWACC1 */ +#define SYS2_CLKENR_HWACC1 (0x1 << 17) +#define SYS2_CLKENR_HWACC1_VAL(val) (((val) & 0x1) << 17) +#define SYS2_CLKENR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC1) | ((val & 0x1) << 17)) +/* Clock Enable Request for HWACC0 */ +#define SYS2_CLKENR_HWACC0 (0x1 << 16) +#define SYS2_CLKENR_HWACC0_VAL(val) (((val) & 0x1) << 16) +#define SYS2_CLKENR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_HWACC0) | ((val & 0x1) << 16)) +/* Clock Enable Request for SIF7 */ +#define SYS2_CLKENR_SIF7 (0x1 << 15) +#define SYS2_CLKENR_SIF7_VAL(val) (((val) & 0x1) << 15) +#define SYS2_CLKENR_SIF7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF7) | ((val & 0x1) << 15)) +/* Clock Enable Request for SIF6 */ +#define SYS2_CLKENR_SIF6 (0x1 << 14) +#define SYS2_CLKENR_SIF6_VAL(val) (((val) & 0x1) << 14) +#define SYS2_CLKENR_SIF6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF6) | ((val & 0x1) << 14)) +/* Clock Enable Request for SIF5 */ +#define SYS2_CLKENR_SIF5 (0x1 << 13) +#define SYS2_CLKENR_SIF5_VAL(val) (((val) & 0x1) << 13) +#define SYS2_CLKENR_SIF5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF5) | ((val & 0x1) << 13)) +/* Clock Enable Request for SIF4 */ +#define SYS2_CLKENR_SIF4 (0x1 << 12) +#define SYS2_CLKENR_SIF4_VAL(val) (((val) & 0x1) << 12) +#define SYS2_CLKENR_SIF4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF4) | ((val & 0x1) << 12)) +/* Clock Enable Request for SIF3 */ +#define SYS2_CLKENR_SIF3 (0x1 << 11) +#define SYS2_CLKENR_SIF3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_CLKENR_SIF3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF3) | ((val & 0x1) << 11)) +/* Clock Enable Request for SIF2 */ +#define SYS2_CLKENR_SIF2 (0x1 << 10) +#define SYS2_CLKENR_SIF2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_CLKENR_SIF2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF2) | ((val & 0x1) << 10)) +/* Clock Enable Request for SIF1 */ +#define SYS2_CLKENR_SIF1 (0x1 << 9) +#define SYS2_CLKENR_SIF1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_CLKENR_SIF1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF1) | ((val & 0x1) << 9)) +/* Clock Enable Request for SIF0 */ +#define SYS2_CLKENR_SIF0 (0x1 << 8) +#define SYS2_CLKENR_SIF0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_CLKENR_SIF0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_SIF0) | ((val & 0x1) << 8)) +/* Clock Enable Request for DFEV7 */ +#define SYS2_CLKENR_DFEV7 (0x1 << 7) +#define SYS2_CLKENR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_CLKENR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV7) | ((val & 0x1) << 7)) +/* Clock Enable Request for DFEV6 */ +#define SYS2_CLKENR_DFEV6 (0x1 << 6) +#define SYS2_CLKENR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_CLKENR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV6) | ((val & 0x1) << 6)) +/* Clock Enable Request for DFEV5 */ +#define SYS2_CLKENR_DFEV5 (0x1 << 5) +#define SYS2_CLKENR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_CLKENR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV5) | ((val & 0x1) << 5)) +/* Clock Enable Request for DFEV4 */ +#define SYS2_CLKENR_DFEV4 (0x1 << 4) +#define SYS2_CLKENR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_CLKENR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV4) | ((val & 0x1) << 4)) +/* Clock Enable Request for DFEV3 */ +#define SYS2_CLKENR_DFEV3 (0x1 << 3) +#define SYS2_CLKENR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_CLKENR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV3) | ((val & 0x1) << 3)) +/* Clock Enable Request for DFEV2 */ +#define SYS2_CLKENR_DFEV2 (0x1 << 2) +#define SYS2_CLKENR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_CLKENR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV2) | ((val & 0x1) << 2)) +/* Clock Enable Request for DFEV1 */ +#define SYS2_CLKENR_DFEV1 (0x1 << 1) +#define SYS2_CLKENR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_CLKENR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV1) | ((val & 0x1) << 1)) +/* Clock Enable Request for DFEV0 */ +#define SYS2_CLKENR_DFEV0 (0x1) +#define SYS2_CLKENR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_CLKENR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKENR_DFEV0) | ((val & 0x1))) + +/******************************************************************************* + * SYS2 Clock Clear Register + ******************************************************************************/ + +/* Clock Disable Request for PORT4 */ +#define SYS2_CLKCLR_PORT4 (0x1 << 27) +#define SYS2_CLKCLR_PORT4_VAL(val) (((val) & 0x1) << 27) +#define SYS2_CLKCLR_PORT4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_PORT4) | ((val & 0x1) << 27)) +/* Clock Disable Request for HWSYNC */ +#define SYS2_CLKCLR_HWSYNC (0x1 << 26) +#define SYS2_CLKCLR_HWSYNC_VAL(val) (((val) & 0x1) << 26) +#define SYS2_CLKCLR_HWSYNC_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWSYNC) | ((val & 0x1) << 26)) +/* Clock Disable Request for MBS */ +#define SYS2_CLKCLR_MBS (0x1 << 25) +#define SYS2_CLKCLR_MBS_VAL(val) (((val) & 0x1) << 25) +#define SYS2_CLKCLR_MBS_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_MBS) | ((val & 0x1) << 25)) +/* Clock Disable Request for SWINT */ +#define SYS2_CLKCLR_SWINT (0x1 << 24) +#define SYS2_CLKCLR_SWINT_VAL(val) (((val) & 0x1) << 24) +#define SYS2_CLKCLR_SWINT_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SWINT) | ((val & 0x1) << 24)) +/* Clock Disable Request for HWACC3 */ +#define SYS2_CLKCLR_HWACC3 (0x1 << 19) +#define SYS2_CLKCLR_HWACC3_VAL(val) (((val) & 0x1) << 19) +#define SYS2_CLKCLR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC3) | ((val & 0x1) << 19)) +/* Clock Disable Request for HWACC2 */ +#define SYS2_CLKCLR_HWACC2 (0x1 << 18) +#define SYS2_CLKCLR_HWACC2_VAL(val) (((val) & 0x1) << 18) +#define SYS2_CLKCLR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC2) | ((val & 0x1) << 18)) +/* Clock Disable Request for HWACC1 */ +#define SYS2_CLKCLR_HWACC1 (0x1 << 17) +#define SYS2_CLKCLR_HWACC1_VAL(val) (((val) & 0x1) << 17) +#define SYS2_CLKCLR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC1) | ((val & 0x1) << 17)) +/* Clock Disable Request for HWACC0 */ +#define SYS2_CLKCLR_HWACC0 (0x1 << 16) +#define SYS2_CLKCLR_HWACC0_VAL(val) (((val) & 0x1) << 16) +#define SYS2_CLKCLR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_HWACC0) | ((val & 0x1) << 16)) +/* Clock Disable Request for SIF7 */ +#define SYS2_CLKCLR_SIF7 (0x1 << 15) +#define SYS2_CLKCLR_SIF7_VAL(val) (((val) & 0x1) << 15) +#define SYS2_CLKCLR_SIF7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF7) | ((val & 0x1) << 15)) +/* Clock Disable Request for SIF6 */ +#define SYS2_CLKCLR_SIF6 (0x1 << 14) +#define SYS2_CLKCLR_SIF6_VAL(val) (((val) & 0x1) << 14) +#define SYS2_CLKCLR_SIF6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF6) | ((val & 0x1) << 14)) +/* Clock Disable Request for SIF5 */ +#define SYS2_CLKCLR_SIF5 (0x1 << 13) +#define SYS2_CLKCLR_SIF5_VAL(val) (((val) & 0x1) << 13) +#define SYS2_CLKCLR_SIF5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF5) | ((val & 0x1) << 13)) +/* Clock Disable Request for SIF4 */ +#define SYS2_CLKCLR_SIF4 (0x1 << 12) +#define SYS2_CLKCLR_SIF4_VAL(val) (((val) & 0x1) << 12) +#define SYS2_CLKCLR_SIF4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF4) | ((val & 0x1) << 12)) +/* Clock Disable Request for SIF3 */ +#define SYS2_CLKCLR_SIF3 (0x1 << 11) +#define SYS2_CLKCLR_SIF3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_CLKCLR_SIF3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF3) | ((val & 0x1) << 11)) +/* Clock Disable Request for SIF2 */ +#define SYS2_CLKCLR_SIF2 (0x1 << 10) +#define SYS2_CLKCLR_SIF2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_CLKCLR_SIF2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF2) | ((val & 0x1) << 10)) +/* Clock Disable Request for SIF1 */ +#define SYS2_CLKCLR_SIF1 (0x1 << 9) +#define SYS2_CLKCLR_SIF1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_CLKCLR_SIF1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF1) | ((val & 0x1) << 9)) +/* Clock Disable Request for SIF0 */ +#define SYS2_CLKCLR_SIF0 (0x1 << 8) +#define SYS2_CLKCLR_SIF0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_CLKCLR_SIF0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_SIF0) | ((val & 0x1) << 8)) +/* Clock Disable Request for DFEV7 */ +#define SYS2_CLKCLR_DFEV7 (0x1 << 7) +#define SYS2_CLKCLR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_CLKCLR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV7) | ((val & 0x1) << 7)) +/* Clock Disable Request for DFEV6 */ +#define SYS2_CLKCLR_DFEV6 (0x1 << 6) +#define SYS2_CLKCLR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_CLKCLR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV6) | ((val & 0x1) << 6)) +/* Clock Disable Request for DFEV5 */ +#define SYS2_CLKCLR_DFEV5 (0x1 << 5) +#define SYS2_CLKCLR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_CLKCLR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV5) | ((val & 0x1) << 5)) +/* Clock Disable Request for DFEV4 */ +#define SYS2_CLKCLR_DFEV4 (0x1 << 4) +#define SYS2_CLKCLR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_CLKCLR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV4) | ((val & 0x1) << 4)) +/* Clock Disable Request for DFEV3 */ +#define SYS2_CLKCLR_DFEV3 (0x1 << 3) +#define SYS2_CLKCLR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_CLKCLR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV3) | ((val & 0x1) << 3)) +/* Clock Disable Request for DFEV2 */ +#define SYS2_CLKCLR_DFEV2 (0x1 << 2) +#define SYS2_CLKCLR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_CLKCLR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV2) | ((val & 0x1) << 2)) +/* Clock Disable Request for DFEV1 */ +#define SYS2_CLKCLR_DFEV1 (0x1 << 1) +#define SYS2_CLKCLR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_CLKCLR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV1) | ((val & 0x1) << 1)) +/* Clock Disable Request for DFEV0 */ +#define SYS2_CLKCLR_DFEV0 (0x1) +#define SYS2_CLKCLR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_CLKCLR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_CLKCLR_DFEV0) | ((val & 0x1))) + +/******************************************************************************* + * SYS2 Reset Status Register + ******************************************************************************/ + +/* HWACC3 Reset */ +#define SYS2_RSR_HWACC3 (0x1 << 11) +#define SYS2_RSR_HWACC3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_RSR_HWACC3_GET(val) (((val) & SYS2_RSR_HWACC3) >> 11) +/* HWACC2 Reset */ +#define SYS2_RSR_HWACC2 (0x1 << 10) +#define SYS2_RSR_HWACC2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_RSR_HWACC2_GET(val) (((val) & SYS2_RSR_HWACC2) >> 10) +/* HWACC1 Reset */ +#define SYS2_RSR_HWACC1 (0x1 << 9) +#define SYS2_RSR_HWACC1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_RSR_HWACC1_GET(val) (((val) & SYS2_RSR_HWACC1) >> 9) +/* HWACC0 Reset */ +#define SYS2_RSR_HWACC0 (0x1 << 8) +#define SYS2_RSR_HWACC0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_RSR_HWACC0_GET(val) (((val) & SYS2_RSR_HWACC0) >> 8) +/* DFEV7 Reset */ +#define SYS2_RSR_DFEV7 (0x1 << 7) +#define SYS2_RSR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_RSR_DFEV7_GET(val) (((val) & SYS2_RSR_DFEV7) >> 7) +/* DFEV6 Reset */ +#define SYS2_RSR_DFEV6 (0x1 << 6) +#define SYS2_RSR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_RSR_DFEV6_GET(val) (((val) & SYS2_RSR_DFEV6) >> 6) +/* DFEV5 Reset */ +#define SYS2_RSR_DFEV5 (0x1 << 5) +#define SYS2_RSR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_RSR_DFEV5_GET(val) (((val) & SYS2_RSR_DFEV5) >> 5) +/* DFEV4 Reset */ +#define SYS2_RSR_DFEV4 (0x1 << 4) +#define SYS2_RSR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_RSR_DFEV4_GET(val) (((val) & SYS2_RSR_DFEV4) >> 4) +/* DFEV3 Reset */ +#define SYS2_RSR_DFEV3 (0x1 << 3) +#define SYS2_RSR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_RSR_DFEV3_GET(val) (((val) & SYS2_RSR_DFEV3) >> 3) +/* DFEV2 Reset */ +#define SYS2_RSR_DFEV2 (0x1 << 2) +#define SYS2_RSR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_RSR_DFEV2_GET(val) (((val) & SYS2_RSR_DFEV2) >> 2) +/* DFEV1 Reset */ +#define SYS2_RSR_DFEV1 (0x1 << 1) +#define SYS2_RSR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_RSR_DFEV1_GET(val) (((val) & SYS2_RSR_DFEV1) >> 1) +/* DFEV0 Reset */ +#define SYS2_RSR_DFEV0 (0x1) +#define SYS2_RSR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_RSR_DFEV0_GET(val) ((val) & SYS2_RSR_DFEV0) + +/****************************************************************************** + * SYS2 Reset Request Register + ******************************************************************************/ + +/* HWACC3 Reset Request */ +#define SYS2_RREQR_HWACC3 (0x1 << 11) +#define SYS2_RREQR_HWACC3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_RREQR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC3) | ((val & 0x1) << 11)) +/* HWACC2 Reset Request */ +#define SYS2_RREQR_HWACC2 (0x1 << 10) +#define SYS2_RREQR_HWACC2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_RREQR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC2) | ((val & 0x1) << 10)) +/* HWACC1 Reset Request */ +#define SYS2_RREQR_HWACC1 (0x1 << 9) +#define SYS2_RREQR_HWACC1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_RREQR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC1) | ((val & 0x1) << 9)) +/* HWACC0 Reset Request */ +#define SYS2_RREQR_HWACC0 (0x1 << 8) +#define SYS2_RREQR_HWACC0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_RREQR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_HWACC0) | ((val & 0x1) << 8)) +/* DFEV7 Reset Request */ +#define SYS2_RREQR_DFEV7 (0x1 << 7) +#define SYS2_RREQR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_RREQR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV7) | ((val & 0x1) << 7)) +/* DFEV6 Reset Request */ +#define SYS2_RREQR_DFEV6 (0x1 << 6) +#define SYS2_RREQR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_RREQR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV6) | ((val & 0x1) << 6)) +/* DFEV5 Reset Request */ +#define SYS2_RREQR_DFEV5 (0x1 << 5) +#define SYS2_RREQR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_RREQR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV5) | ((val & 0x1) << 5)) +/* DFEV4 Reset Request */ +#define SYS2_RREQR_DFEV4 (0x1 << 4) +#define SYS2_RREQR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_RREQR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV4) | ((val & 0x1) << 4)) +/* DFEV3 Reset Request */ +#define SYS2_RREQR_DFEV3 (0x1 << 3) +#define SYS2_RREQR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_RREQR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV3) | ((val & 0x1) << 3)) +/* DFEV2 Reset Request */ +#define SYS2_RREQR_DFEV2 (0x1 << 2) +#define SYS2_RREQR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_RREQR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV2) | ((val & 0x1) << 2)) +/* DFEV1 Reset Request */ +#define SYS2_RREQR_DFEV1 (0x1 << 1) +#define SYS2_RREQR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_RREQR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV1) | ((val & 0x1) << 1)) +/* DFEV0 Reset Request */ +#define SYS2_RREQR_DFEV0 (0x1) +#define SYS2_RREQR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_RREQR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_RREQR_DFEV0) | ((val & 0x1))) + +/******************************************************************************* + * SYS2 Reset Release Register + ******************************************************************************/ + +/* HWACC3 Reset Release */ +#define SYS2_RRLSR_HWACC3 (0x1 << 11) +#define SYS2_RRLSR_HWACC3_VAL(val) (((val) & 0x1) << 11) +#define SYS2_RRLSR_HWACC3_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC3) | ((val & 0x1) << 11)) +/* HWACC2 Reset Release */ +#define SYS2_RRLSR_HWACC2 (0x1 << 10) +#define SYS2_RRLSR_HWACC2_VAL(val) (((val) & 0x1) << 10) +#define SYS2_RRLSR_HWACC2_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC2) | ((val & 0x1) << 10)) +/* HWACC1 Reset Release */ +#define SYS2_RRLSR_HWACC1 (0x1 << 9) +#define SYS2_RRLSR_HWACC1_VAL(val) (((val) & 0x1) << 9) +#define SYS2_RRLSR_HWACC1_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC1) | ((val & 0x1) << 9)) +/* HWACC0 Reset Release */ +#define SYS2_RRLSR_HWACC0 (0x1 << 8) +#define SYS2_RRLSR_HWACC0_VAL(val) (((val) & 0x1) << 8) +#define SYS2_RRLSR_HWACC0_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_HWACC0) | ((val & 0x1) << 8)) +/* DFEV7 Reset Release */ +#define SYS2_RRLSR_DFEV7 (0x1 << 7) +#define SYS2_RRLSR_DFEV7_VAL(val) (((val) & 0x1) << 7) +#define SYS2_RRLSR_DFEV7_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV7) | ((val & 0x1) << 7)) +/* DFEV6 Reset Release */ +#define SYS2_RRLSR_DFEV6 (0x1 << 6) +#define SYS2_RRLSR_DFEV6_VAL(val) (((val) & 0x1) << 6) +#define SYS2_RRLSR_DFEV6_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV6) | ((val & 0x1) << 6)) +/* DFEV5 Reset Release */ +#define SYS2_RRLSR_DFEV5 (0x1 << 5) +#define SYS2_RRLSR_DFEV5_VAL(val) (((val) & 0x1) << 5) +#define SYS2_RRLSR_DFEV5_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV5) | ((val & 0x1) << 5)) +/* DFEV4 Reset Release */ +#define SYS2_RRLSR_DFEV4 (0x1 << 4) +#define SYS2_RRLSR_DFEV4_VAL(val) (((val) & 0x1) << 4) +#define SYS2_RRLSR_DFEV4_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV4) | ((val & 0x1) << 4)) +/* DFEV3 Reset Release */ +#define SYS2_RRLSR_DFEV3 (0x1 << 3) +#define SYS2_RRLSR_DFEV3_VAL(val) (((val) & 0x1) << 3) +#define SYS2_RRLSR_DFEV3_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV3) | ((val & 0x1) << 3)) +/* DFEV2 Reset Release */ +#define SYS2_RRLSR_DFEV2 (0x1 << 2) +#define SYS2_RRLSR_DFEV2_VAL(val) (((val) & 0x1) << 2) +#define SYS2_RRLSR_DFEV2_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV2) | ((val & 0x1) << 2)) +/* DFEV1 Reset Release */ +#define SYS2_RRLSR_DFEV1 (0x1 << 1) +#define SYS2_RRLSR_DFEV1_VAL(val) (((val) & 0x1) << 1) +#define SYS2_RRLSR_DFEV1_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV1) | ((val & 0x1) << 1)) +/* DFEV0 Reset Release */ +#define SYS2_RRLSR_DFEV0 (0x1) +#define SYS2_RRLSR_DFEV0_VAL(val) (((val) & 0x1)) +#define SYS2_RRLSR_DFEV0_SET (reg,val) (reg) = ((reg & ~SYS2_RRLSR_DFEV0) | ((val & 0x1))) + +#endif /* __SYS2_H */ + diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-buttons.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-buttons.c new file mode 100644 index 0000000000..ad25cac797 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-buttons.c @@ -0,0 +1,58 @@ +/* + * Lantiq GPIO button support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <dev-gpio-buttons.h> + +void __init ltq_register_gpio_keys_polled(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; + struct gpio_keys_platform_data pdata; + struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, buttons, nbuttons * sizeof(*p)); + + pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = poll_interval; + pdata.nbuttons = nbuttons; + pdata.buttons = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_buttons: + kfree(p); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-leds.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-leds.c new file mode 100644 index 0000000000..89dc79de61 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/dev-gpio-leds.c @@ -0,0 +1,57 @@ +/* + * Lantiq GPIO LED device support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <dev-gpio-leds.h> + +void __init ltq_add_device_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds) +{ + struct platform_device *pdev; + struct gpio_led_platform_data pdata; + struct gpio_led *p; + int err; + + p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, leds, num_leds * sizeof(*p)); + + pdev = platform_device_alloc("leds-gpio", id); + if (!pdev) + goto err_free_leds; + + memset(&pdata, 0, sizeof(pdata)); + pdata.num_leds = num_leds; + pdata.leds = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_leds: + kfree(p); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/Kconfig b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/Kconfig new file mode 100644 index 0000000000..03e999d92e --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/Kconfig @@ -0,0 +1,11 @@ +if SOC_FALCON + +menu "MIPS Machine" + +config LANTIQ_MACH_EASY98000 + bool "Easy98000" + default y + +endmenu + +endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/Makefile b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/Makefile new file mode 100644 index 0000000000..3634154fb9 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/Makefile @@ -0,0 +1,2 @@ +obj-y := prom.o reset.o sysctrl.o devices.o gpio.o +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/addon-easy98000.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/addon-easy98000.c new file mode 100644 index 0000000000..317ee4001b --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/addon-easy98000.c @@ -0,0 +1,213 @@ +/* + * EASY98000 CPLD Addon driver + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> + +struct easy98000_reg_cpld { + u16 cmdreg1; /* 0x1 */ + u16 cmdreg0; /* 0x0 */ + u16 idreg0; /* 0x3 */ + u16 resreg; /* 0x2 */ + u16 intreg; /* 0x5 */ + u16 idreg1; /* 0x4 */ + u16 ledreg; /* 0x7 */ + u16 pcmconconfig; /* 0x6 */ + u16 res0; /* 0x9 */ + u16 ethledreg; /* 0x8 */ + u16 res1[4]; /* 0xa-0xd */ + u16 cpld1v; /* 0xf */ + u16 cpld2v; /* 0xe */ +}; +static struct easy98000_reg_cpld * const cpld = + (struct easy98000_reg_cpld *)(KSEG1 | 0x17c00000); +#define cpld_r8(reg) (__raw_readw(&cpld->reg) & 0xFF) +#define cpld_w8(val, reg) __raw_writew((val) & 0xFF, &cpld->reg) + +int easy98000_addon_has_dm9000(void) +{ + if ((cpld_r8(idreg0) & 0xF) == 1) + return 1; + return 0; +} + +#if defined(CONFIG_PROC_FS) +typedef void (*cpld_dump) (struct seq_file *s); +struct proc_entry { + char *name; + void *callback; +}; + +static int cpld_proc_show ( struct seq_file *s, void *p ) +{ + cpld_dump dump = s->private; + + if ( dump != NULL ) + dump(s); + + return 0; +} + +static int cpld_proc_open ( struct inode *inode, struct file *file ) +{ + return single_open ( file, cpld_proc_show, PDE(inode)->data ); +} + +static void cpld_versions_get ( struct seq_file *s ) +{ + seq_printf(s, "CPLD1: V%d\n", cpld_r8(cpld1v)); + seq_printf(s, "CPLD2: V%d\n", cpld_r8(cpld2v)); +} + +static void cpld_ebu_module_get ( struct seq_file *s ) +{ + u8 addon_id; + + addon_id = cpld_r8(idreg0) & 0xF; + switch (addon_id) { + case 0xF: /* nothing connected */ + break; + case 1: + seq_printf(s, "Ethernet Controller module (dm9000)\n"); + break; + default: + seq_printf(s, "Unknown EBU module (EBU_ID=0x%02X)\n", addon_id); + break; + } +} + +static void cpld_xmii_module_get ( struct seq_file *s ) +{ + u8 addon_id; + char *mod = NULL; + + addon_id = cpld_r8(idreg1) & 0xF; + switch (addon_id) { + case 0xF: + mod = "no module"; + break; + case 0x1: + mod = "RGMII module"; + break; + case 0x4: + mod = "GMII MAC Mode (XWAY TANTOS-3G)"; + break; + case 0x6: + mod = "TMII MAC Mode (XWAY TANTOS-3G)"; + break; + case 0x8: + mod = "GMII PHY module"; + break; + case 0x9: + mod = "MII PHY module"; + break; + case 0xA: + mod = "RMII PHY module"; + break; + default: + break; + } + if (mod) + seq_printf(s, "%s\n", mod); + else + seq_printf(s, "unknown xMII module (xMII_ID=0x%02X)\n", addon_id); +} + +static struct proc_entry proc_entries[] = { + {"versions", cpld_versions_get}, + {"ebu", cpld_ebu_module_get}, + {"xmii", cpld_xmii_module_get}, +}; + +static struct file_operations ops = { + .owner = THIS_MODULE, + .open = cpld_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void cpld_proc_entry_create(struct proc_dir_entry *parent_node, + struct proc_entry *proc_entry) +{ + proc_create_data ( proc_entry->name, (S_IFREG | S_IRUGO), parent_node, + &ops, proc_entry->callback); +} + +static int cpld_proc_install(void) +{ + struct proc_dir_entry *driver_proc_node; + + driver_proc_node = proc_mkdir("cpld", NULL); + if (driver_proc_node != NULL) { + int i; + for (i = 0; i < ARRAY_SIZE(proc_entries); i++) + cpld_proc_entry_create(driver_proc_node, + &proc_entries[i]); + } else { + printk("cannot create proc entry"); + return -1; + } + return 0; +} +#else +static inline int cpld_proc_install(void) {} +#endif + +static int easy98000_addon_probe(struct platform_device *pdev) +{ + return cpld_proc_install(); +} + +static int easy98000_addon_remove(struct platform_device *pdev) +{ +#if defined(CONFIG_PROC_FS) + char buf[64]; + int i; + + for (i = 0; i < sizeof(proc_entries) / sizeof(proc_entries[0]); i++) { + sprintf(buf, "cpld/%s", proc_entries[i].name); + remove_proc_entry(buf, 0); + } + remove_proc_entry("cpld", 0); +#endif + return 0; +} + +static struct platform_driver easy98000_addon_driver = { + .probe = easy98000_addon_probe, + .remove = __devexit_p(easy98000_addon_remove), + .driver = { + .name = "easy98000_addon", + .owner = THIS_MODULE, + }, +}; + +int __init easy98000_addon_init(void) +{ + return platform_driver_register(&easy98000_addon_driver); +} + +void __exit easy98000_addon_exit(void) +{ + platform_driver_unregister(&easy98000_addon_driver); +} + +module_init(easy98000_addon_init); +module_exit(easy98000_addon_exit); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c new file mode 100644 index 0000000000..94622cfda8 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.c @@ -0,0 +1,161 @@ +/* + * EASY98000 CPLD LED driver + * + * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/leds.h> +#include <linux/slab.h> + +#include "dev-leds-easy98000-cpld.h" + +const char *led_name[8] = { + "ge0_act", + "ge0_link", + "ge1_act", + "ge1_link", + "fe2_act", + "fe2_link", + "fe3_act", + "fe3_link" +}; + +#define cpld_base7 ((u16 *)(KSEG1 | 0x17c0000c)) +#define cpld_base8 ((u16 *)(KSEG1 | 0x17c00012)) + +#define ltq_r16(reg) __raw_readw(reg) +#define ltq_w16(val, reg) __raw_writew(val, reg) + +struct cpld_led_dev { + struct led_classdev cdev; + u8 mask; + u16 *base; +}; + +struct cpld_led_drvdata { + struct cpld_led_dev *led_devs; + int num_leds; +}; + +void led_set(u8 mask, u16 *base) +{ + ltq_w16(ltq_r16(base) | mask, base); +} + +void led_clear(u8 mask, u16 *base) +{ + ltq_w16(ltq_r16(base) & (~mask), base); +} + +void led_blink_clear(u8 mask, u16 *base) +{ + led_clear(mask, base); +} + +static void led_brightness(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct cpld_led_dev *led_dev = + container_of(led_cdev, struct cpld_led_dev, cdev); + + if (value) + led_set(led_dev->mask, led_dev->base); + else + led_clear(led_dev->mask, led_dev->base); +} + +static int led_probe(struct platform_device *pdev) +{ + int i; + char name[32]; + struct cpld_led_drvdata *drvdata; + int ret = 0; + + drvdata = kzalloc(sizeof(struct cpld_led_drvdata) + + sizeof(struct cpld_led_dev) * MAX_LED, + GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + drvdata->led_devs = (struct cpld_led_dev *) &drvdata[1]; + + for (i = 0; i < MAX_LED; i++) { + struct cpld_led_dev *led_dev = &drvdata->led_devs[i]; + led_dev->cdev.brightness_set = led_brightness; + led_dev->cdev.default_trigger = NULL; + led_dev->mask = 1 << (i % 8); + if(i < 8) { + sprintf(name, "easy98000-cpld:%s", led_name[i]); + led_dev->base = cpld_base8; + } else { + sprintf(name, "easy98000-cpld:red:%d", i-8); + led_dev->base = cpld_base7; + } + led_dev->cdev.name = name; + ret = led_classdev_register(&pdev->dev, &led_dev->cdev); + if (ret) + goto err; + } + platform_set_drvdata(pdev, drvdata); + return 0; + +err: + printk("led_probe: 3\n"); + for (i = i - 1; i >= 0; i--) + led_classdev_unregister(&drvdata->led_devs[i].cdev); + + kfree(drvdata); + return ret; +} + +static int led_remove(struct platform_device *pdev) +{ + int i; + struct cpld_led_drvdata *drvdata = platform_get_drvdata(pdev); + for (i = 0; i < MAX_LED; i++) + led_classdev_unregister(&drvdata->led_devs[i].cdev); + kfree(drvdata); + return 0; +} + +static struct platform_driver led_driver = { + .probe = led_probe, + .remove = __devexit_p(led_remove), + .driver = { + .name = LED_NAME, + .owner = THIS_MODULE, + }, +}; + +int __init easy98000_cpld_led_init(void) +{ + pr_info(LED_DESC ", Version " LED_VERSION + " (c) Copyright 2011, Lantiq Deutschland GmbH\n"); + return platform_driver_register(&led_driver); +} + +void __exit easy98000_cpld_led_exit(void) +{ + platform_driver_unregister(&led_driver); +} + +module_init(easy98000_cpld_led_init); +module_exit(easy98000_cpld_led_exit); + +MODULE_DESCRIPTION(LED_NAME); +MODULE_DESCRIPTION(LED_DESC); +MODULE_AUTHOR("Ralph Hempel <ralph.hempel@lantiq.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h new file mode 100644 index 0000000000..3160189fe9 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/dev-leds-easy98000-cpld.h @@ -0,0 +1,20 @@ +/* + * EASY98000 CPLD LED driver + * + * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _INCLUDE_EASY98000_CPLD_LED_H_ +#define _INCLUDE_EASY98000_CPLD_LED_H_ + +#define LED_NAME "easy98000_cpld_led" +#define LED_DESC "EASY98000 LED driver" +#define LED_VERSION "1.0.0" + +#define MAX_LED 16 + +#endif /* _INCLUDE_EASY98000_CPLD_LED_H_ */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/devices.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/devices.c new file mode 100644 index 0000000000..e684ed470f --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/devices.c @@ -0,0 +1,152 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/platform_device.h> +#include <linux/mtd/nand.h> +#include <linux/gpio.h> + +#include <lantiq_soc.h> + +#include "devices.h" + +/* nand flash */ +/* address lines used for NAND control signals */ +#define NAND_ADDR_ALE 0x10000 +#define NAND_ADDR_CLE 0x20000 +/* Ready/Busy Status */ +#define MODCON_STS 0x0002 +/* Ready/Busy Status Edge */ +#define MODCON_STSEDGE 0x0004 + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static int +falcon_nand_ready(struct mtd_info *mtd) +{ + u32 modcon = ltq_ebu_r32(LTQ_EBU_MODCON); + + return (((modcon & (MODCON_STS | MODCON_STSEDGE)) == + (MODCON_STS | MODCON_STSEDGE))); +} + +static void +falcon_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + + if (ctrl & NAND_CTRL_CHANGE) { + nandaddr &= ~(NAND_ADDR_ALE | NAND_ADDR_CLE); + + if (ctrl & NAND_CLE) + nandaddr |= NAND_ADDR_CLE; + if (ctrl & NAND_ALE) + nandaddr |= NAND_ADDR_ALE; + + this->IO_ADDR_W = (void __iomem *) nandaddr; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static struct platform_nand_data falcon_flash_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 25, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = falcon_hwcontrol, + .dev_ready = falcon_nand_ready, + } +}; + +static struct resource ltq_nand_res = + MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX); + +static struct platform_device ltq_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = <q_nand_res, + .dev = { + .platform_data = &falcon_flash_nand_data, + }, +}; + +void __init +falcon_register_nand(void) +{ + platform_device_register(<q_flash_nand); +} + +/* gpio */ +#define DECLARE_GPIO_RES(port) \ +static struct resource falcon_gpio ## port ## _res[] = { \ + MEM_RES("gpio"#port, LTQ_GPIO ## port ## _BASE_ADDR, \ + LTQ_GPIO ## port ## _SIZE), \ + MEM_RES("padctrl"#port, LTQ_PADCTRL ## port ## _BASE_ADDR, \ + LTQ_PADCTRL ## port ## _SIZE), \ + IRQ_RES("gpio_mux"#port, FALCON_IRQ_GPIO_P ## port) \ +} +DECLARE_GPIO_RES(0); +DECLARE_GPIO_RES(1); +DECLARE_GPIO_RES(2); +DECLARE_GPIO_RES(3); +DECLARE_GPIO_RES(4); + +void __init +falcon_register_gpio(void) +{ + platform_device_register_simple("falcon_gpio", 0, + falcon_gpio0_res, ARRAY_SIZE(falcon_gpio0_res)); + platform_device_register_simple("falcon_gpio", 1, + falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res)); + platform_device_register_simple("falcon_gpio", 2, + falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res)); +} + +void __init +falcon_register_gpio_extra(void) +{ + platform_device_register_simple("falcon_gpio", 3, + falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res)); + platform_device_register_simple("falcon_gpio", 4, + falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res)); +} + +/* spi flash */ +static struct platform_device ltq_spi = { + .name = "falcon_spi", + .num_resources = 0, +}; + +void __init +falcon_register_spi_flash(struct spi_board_info *data) +{ + spi_register_board_info(data, 1); + platform_device_register(<q_spi); +} + +/* i2c */ +static struct resource falcon_i2c_resources[] = { + MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE), + IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ), + IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ), + IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR), + IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P), +}; + +void __init +falcon_register_i2c(void) +{ + platform_device_register_simple("i2c-falcon", 0, + falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources)); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/devices.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/devices.h new file mode 100644 index 0000000000..d81edbe74e --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/devices.h @@ -0,0 +1,25 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#ifndef _FALCON_DEVICES_H__ +#define _FALCON_DEVICES_H__ + +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include "../devices.h" + +extern void falcon_register_nand(void); +extern void falcon_register_gpio(void); +extern void falcon_register_gpio_extra(void); +extern void falcon_register_spi_flash(struct spi_board_info *data); +extern void falcon_register_i2c(void); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/gpio.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/gpio.c new file mode 100644 index 0000000000..4147d61c7d --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/gpio.c @@ -0,0 +1,409 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/err.h> +#include <linux/platform_device.h> + +#include <lantiq_soc.h> + +/* Multiplexer Control Register */ +#define LTQ_PADC_MUX(x) (x * 0x4) +/* Pad Control Availability Register */ +#define LTQ_PADC_AVAIL 0x000000F0 + +/* Data Output Register */ +#define LTQ_GPIO_OUT 0x00000000 +/* Data Input Register */ +#define LTQ_GPIO_IN 0x00000004 +/* Direction Register */ +#define LTQ_GPIO_DIR 0x00000008 +/* External Interrupt Control Register 0 */ +#define LTQ_GPIO_EXINTCR0 0x00000018 +/* External Interrupt Control Register 1 */ +#define LTQ_GPIO_EXINTCR1 0x0000001C +/* IRN Capture Register */ +#define LTQ_GPIO_IRNCR 0x00000020 +/* IRN Interrupt Configuration Register */ +#define LTQ_GPIO_IRNCFG 0x0000002C +/* IRN Interrupt Enable Set Register */ +#define LTQ_GPIO_IRNRNSET 0x00000030 +/* IRN Interrupt Enable Clear Register */ +#define LTQ_GPIO_IRNENCLR 0x00000034 +/* Output Set Register */ +#define LTQ_GPIO_OUTSET 0x00000040 +/* Output Cler Register */ +#define LTQ_GPIO_OUTCLR 0x00000044 +/* Direction Clear Register */ +#define LTQ_GPIO_DIRSET 0x00000048 +/* Direction Set Register */ +#define LTQ_GPIO_DIRCLR 0x0000004C + +/* turn a gpio_chip into a falcon_gpio_port */ +#define ctop(c) container_of(c, struct falcon_gpio_port, gpio_chip) +/* turn a irq_data into a falcon_gpio_port */ +#define itop(i) ((struct falcon_gpio_port *) irq_get_chip_data(i->irq)) + +#define ltq_pad_r32(p, reg) ltq_r32(p->pad + reg) +#define ltq_pad_w32(p, val, reg) ltq_w32(val, p->pad + reg) +#define ltq_pad_w32_mask(c, clear, set, reg) \ + ltq_pad_w32(c, (ltq_pad_r32(c, reg) & ~(clear)) | (set), reg) + +#define ltq_port_r32(p, reg) ltq_r32(p->port + reg) +#define ltq_port_w32(p, val, reg) ltq_w32(val, p->port + reg) +#define ltq_port_w32_mask(p, clear, set, reg) \ + ltq_port_w32(p, (ltq_port_r32(p, reg) & ~(clear)) | (set), reg) + +#define MAX_PORTS 5 +#define PINS_PER_PORT 32 + +struct falcon_gpio_port { + struct gpio_chip gpio_chip; + void __iomem *pad; + void __iomem *port; + unsigned int irq_base; + unsigned int chained_irq; + struct clk *clk; +}; + +static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS]; + +int gpio_to_irq(unsigned int gpio) +{ + return __gpio_to_irq(gpio); +} +EXPORT_SYMBOL(gpio_to_irq); + +int ltq_gpio_mux_set(unsigned int pin, unsigned int mux) +{ + int port = pin / 100; + int offset = pin % 100; + struct falcon_gpio_port *gpio_port; + + if ((offset >= PINS_PER_PORT) || (port >= MAX_PORTS)) + return -EINVAL; + + gpio_port = <q_gpio_port[port]; + ltq_pad_w32(gpio_port, mux & 0x3, LTQ_PADC_MUX(offset)); + + return 0; +} +EXPORT_SYMBOL(ltq_gpio_mux_set); + +int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux, + unsigned int dir, const char *name) +{ + int port = pin / 100; + int offset = pin % 100; + + if (offset >= PINS_PER_PORT || port >= MAX_PORTS) + return -EINVAL; + + if (devm_gpio_request(dev, pin, name)) { + pr_err("failed to setup lantiq gpio: %s\n", name); + return -EBUSY; + } + + if (dir) + gpio_direction_output(pin, 1); + else + gpio_direction_input(pin); + + return ltq_gpio_mux_set(pin, mux); +} +EXPORT_SYMBOL(ltq_gpio_request); + +static int +falcon_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRCLR); + + return 0; +} + +static void +falcon_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + if (value) + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTSET); + else + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_OUTCLR); +} + +static int +falcon_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + falcon_gpio_set(chip, offset, value); + ltq_port_w32(ctop(chip), 1 << offset, LTQ_GPIO_DIRSET); + + return 0; +} + +static int +falcon_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + if ((ltq_port_r32(ctop(chip), LTQ_GPIO_DIR) >> offset) & 1) + return (ltq_port_r32(ctop(chip), LTQ_GPIO_OUT) >> offset) & 1; + else + return (ltq_port_r32(ctop(chip), LTQ_GPIO_IN) >> offset) & 1; +} + +static int +falcon_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) { + if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1) + return -EBUSY; + /* switch on gpio function */ + ltq_pad_w32(ctop(chip), 1, LTQ_PADC_MUX(offset)); + return 0; + } + + return -ENODEV; +} + +static void +falcon_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + if ((ltq_pad_r32(ctop(chip), LTQ_PADC_AVAIL) >> offset) & 1) { + if (ltq_pad_r32(ctop(chip), LTQ_PADC_MUX(offset)) > 1) + return; + /* switch off gpio function */ + ltq_pad_w32(ctop(chip), 0, LTQ_PADC_MUX(offset)); + } +} + +static int +falcon_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return ctop(chip)->irq_base + offset; +} + +static void +falcon_gpio_disable_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR); +} + +static void +falcon_gpio_enable_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + if (!ltq_pad_r32(itop(d), LTQ_PADC_MUX(offset)) < 1) + /* switch on gpio function */ + ltq_pad_w32(itop(d), 1, LTQ_PADC_MUX(offset)); + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNRNSET); +} + +static void +falcon_gpio_ack_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR); +} + +static void +falcon_gpio_mask_and_ack_irq(struct irq_data *d) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNENCLR); + ltq_port_w32(itop(d), 1 << offset, LTQ_GPIO_IRNCR); +} + +static struct irq_chip falcon_gpio_irq_chip; +static int +falcon_gpio_irq_type(struct irq_data *d, unsigned int type) +{ + unsigned int offset = d->irq - itop(d)->irq_base; + unsigned int mask = 1 << offset; + + if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) + return 0; + + if ((type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) != 0) { + /* level triggered */ + ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_IRNCFG); + irq_set_chip_and_handler_name(d->irq, + &falcon_gpio_irq_chip, handle_level_irq, "mux"); + } else { + /* edge triggered */ + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_IRNCFG); + irq_set_chip_and_handler_name(d->irq, + &falcon_gpio_irq_chip, handle_simple_irq, "mux"); + } + + if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0); + ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR1); + } else { + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) != 0) + /* positive logic: rising edge, high level */ + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR0); + else + /* negative logic: falling edge, low level */ + ltq_port_w32_mask(itop(d), 0, mask, LTQ_GPIO_EXINTCR0); + ltq_port_w32_mask(itop(d), mask, 0, LTQ_GPIO_EXINTCR1); + } + + return gpio_direction_input(itop(d)->gpio_chip.base + offset); +} + +static void +falcon_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct falcon_gpio_port *gpio_port = irq_desc_get_handler_data(desc); + unsigned long irncr; + int offset; + + /* acknowledge interrupt */ + irncr = ltq_port_r32(gpio_port, LTQ_GPIO_IRNCR); + ltq_port_w32(gpio_port, irncr, LTQ_GPIO_IRNCR); + + desc->irq_data.chip->irq_ack(&desc->irq_data); + + for_each_set_bit(offset, &irncr, gpio_port->gpio_chip.ngpio) + generic_handle_irq(gpio_port->irq_base + offset); +} + +static struct irq_chip falcon_gpio_irq_chip = { + .name = "gpio_irq_mux", + .irq_mask = falcon_gpio_disable_irq, + .irq_unmask = falcon_gpio_enable_irq, + .irq_ack = falcon_gpio_ack_irq, + .irq_mask_ack = falcon_gpio_mask_and_ack_irq, + .irq_set_type = falcon_gpio_irq_type, +}; + +static struct irqaction gpio_cascade = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "gpio_cascade", +}; + +static int +falcon_gpio_probe(struct platform_device *pdev) +{ + struct falcon_gpio_port *gpio_port; + int ret, i; + struct resource *gpiores, *padres; + int irq; + + if (pdev->id >= MAX_PORTS) + return -ENODEV; + + gpiores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + padres = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq = platform_get_irq(pdev, 0); + if (!gpiores || !padres) + return -ENODEV; + + gpio_port = <q_gpio_port[pdev->id]; + gpio_port->gpio_chip.label = "falcon-gpio"; + gpio_port->gpio_chip.direction_input = falcon_gpio_direction_input; + gpio_port->gpio_chip.direction_output = falcon_gpio_direction_output; + gpio_port->gpio_chip.get = falcon_gpio_get; + gpio_port->gpio_chip.set = falcon_gpio_set; + gpio_port->gpio_chip.request = falcon_gpio_request; + gpio_port->gpio_chip.free = falcon_gpio_free; + gpio_port->gpio_chip.base = 100 * pdev->id; + gpio_port->gpio_chip.ngpio = 32; + gpio_port->gpio_chip.dev = &pdev->dev; + + gpio_port->port = ltq_remap_resource(gpiores); + gpio_port->pad = ltq_remap_resource(padres); + + if (!gpio_port->port || !gpio_port->pad) { + dev_err(&pdev->dev, "Could not map io ranges\n"); + ret = -ENOMEM; + goto err; + } + + gpio_port->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(gpio_port->clk)) { + dev_err(&pdev->dev, "Could not get clock\n"); + ret = PTR_ERR(gpio_port->clk);; + goto err; + } + clk_enable(gpio_port->clk); + + if (irq > 0) { + /* irq_chip support */ + gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq; + gpio_port->irq_base = INT_NUM_EXTRA_START + (32 * pdev->id); + + for (i = 0; i < 32; i++) { + irq_set_chip_and_handler_name(gpio_port->irq_base + i, + &falcon_gpio_irq_chip, handle_simple_irq, + "mux"); + irq_set_chip_data(gpio_port->irq_base + i, gpio_port); + /* set to negative logic (falling edge, low level) */ + ltq_port_w32_mask(gpio_port, 0, 1 << i, + LTQ_GPIO_EXINTCR0); + } + + gpio_port->chained_irq = irq; + setup_irq(irq, &gpio_cascade); + irq_set_handler_data(irq, gpio_port); + irq_set_chained_handler(irq, falcon_gpio_irq_handler); + } + + ret = gpiochip_add(&gpio_port->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n", + pdev->id, ret); + goto err; + } + platform_set_drvdata(pdev, gpio_port); + return ret; + +err: + dev_err(&pdev->dev, "Error in gpio_probe %d, %d\n", pdev->id, ret); + if (gpiores) + release_resource(gpiores); + if (padres) + release_resource(padres); + + if (gpio_port->port) + iounmap(gpio_port->port); + if (gpio_port->pad) + iounmap(gpio_port->pad); + return ret; +} + +static struct platform_driver falcon_gpio_driver = { + .probe = falcon_gpio_probe, + .driver = { + .name = "falcon_gpio", + .owner = THIS_MODULE, + }, +}; + +int __init +falcon_gpio_init(void) +{ + int ret; + + pr_info("FALC(tm) ON GPIO Driver, (C) 2011 Lantiq Deutschland Gmbh\n"); + ret = platform_driver_register(&falcon_gpio_driver); + if (ret) + pr_err("falcon_gpio: Error registering platform driver!"); + return ret; +} + +postcore_initcall(falcon_gpio_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-95C3AM1.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-95C3AM1.c new file mode 100644 index 0000000000..42a3344ae9 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-95C3AM1.c @@ -0,0 +1,94 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c-gpio.h> + +#include <dev-gpio-leds.h> + +#include "../machtypes.h" +#include "devices.h" + +#define BOARD_95C3AM1_GPIO_LED_0 10 +#define BOARD_95C3AM1_GPIO_LED_1 11 +#define BOARD_95C3AM1_GPIO_LED_2 12 +#define BOARD_95C3AM1_GPIO_LED_3 13 + +static struct mtd_partition board_95C3AM1_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x40000, /* 2 sectors for redundant env. */ + }, + { + .name = "linux", + .offset = 0x80000, + .size = 0xF80000, /* map only 16 MiB */ + }, +}; + +static struct flash_platform_data board_95C3AM1_flash_platform_data = { + .name = "sflash", + .parts = board_95C3AM1_partitions, + .nr_parts = ARRAY_SIZE(board_95C3AM1_partitions) +}; + +static struct spi_board_info board_95C3AM1_flash_data __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .platform_data = &board_95C3AM1_flash_platform_data +}; + +static struct gpio_led board_95C3AM1_gpio_leds[] __initdata = { + { + .name = "power", + .gpio = BOARD_95C3AM1_GPIO_LED_0, + .active_low = 0, + }, { + .name = "optical", + .gpio = BOARD_95C3AM1_GPIO_LED_1, + .active_low = 0, + }, { + .name = "lan", + .gpio = BOARD_95C3AM1_GPIO_LED_2, + .active_low = 0, + }, { + .name = "update", + .gpio = BOARD_95C3AM1_GPIO_LED_3, + .active_low = 0, + } +}; + +static struct i2c_gpio_platform_data board_95C3AM1_i2c_gpio_data = { + .sda_pin = 107, + .scl_pin = 108, +}; + +static struct platform_device board_95C3AM1_i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &board_95C3AM1_i2c_gpio_data, + } +}; + +static void __init board_95C3AM1_init(void) +{ + falcon_register_i2c(); + falcon_register_spi_flash(&board_95C3AM1_flash_data); + platform_device_register(&board_95C3AM1_i2c_gpio_device); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(board_95C3AM1_gpio_leds), + board_95C3AM1_gpio_leds); +} + +MIPS_MACHINE(LANTIQ_MACH_95C3AM1, + "95C3AM1", + "95C3AM1 Board", + board_95C3AM1_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98000.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98000.c new file mode 100644 index 0000000000..fc5720d4ea --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98000.c @@ -0,0 +1,138 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/eeprom.h> + +#include "../machtypes.h" + +#include "devices.h" + +static struct mtd_partition easy98000_nor_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x40000, /* 2 sectors for redundant env. */ + }, + { + .name = "linux", + .offset = 0x80000, + .size = 0xF80000, /* map only 16 MiB */ + }, +}; + +struct physmap_flash_data easy98000_nor_flash_data = { + .nr_parts = ARRAY_SIZE(easy98000_nor_partitions), + .parts = easy98000_nor_partitions, +}; + +static struct flash_platform_data easy98000_spi_flash_platform_data = { + .name = "sflash", + .parts = easy98000_nor_partitions, + .nr_parts = ARRAY_SIZE(easy98000_nor_partitions) +}; + +static struct spi_board_info easy98000_spi_flash_data __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .platform_data = &easy98000_spi_flash_platform_data +}; + +/* setup gpio based spi bus/device for access to the eeprom on the board */ +#define SPI_GPIO_MRST 102 +#define SPI_GPIO_MTSR 103 +#define SPI_GPIO_CLK 104 +#define SPI_GPIO_CS0 105 +#define SPI_GPIO_CS1 106 +#define SPI_GPIO_BUS_NUM 1 + +static struct spi_gpio_platform_data easy98000_spi_gpio_data = { + .sck = SPI_GPIO_CLK, + .mosi = SPI_GPIO_MTSR, + .miso = SPI_GPIO_MRST, + .num_chipselect = 2, +}; + +static struct platform_device easy98000_spi_gpio_device = { + .name = "spi_gpio", + .id = SPI_GPIO_BUS_NUM, + .dev.platform_data = &easy98000_spi_gpio_data, +}; + +static struct spi_eeprom at25160n = { + .byte_len = 16 * 1024 / 8, + .name = "at25160n", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info easy98000_spi_gpio_devices __initdata = { + .modalias = "at25", + .bus_num = SPI_GPIO_BUS_NUM, + .max_speed_hz = 1000 * 1000, + .mode = SPI_MODE_3, + .chip_select = 1, + .controller_data = (void *) SPI_GPIO_CS1, + .platform_data = &at25160n, +}; + +static void __init +easy98000_init_common(void) +{ + spi_register_board_info(&easy98000_spi_gpio_devices, 1); + platform_device_register(&easy98000_spi_gpio_device); + falcon_register_i2c(); +} + +static void __init +easy98000_init(void) +{ + easy98000_init_common(); + ltq_register_nor(&easy98000_nor_flash_data); +} + +static void __init +easy98000sf_init(void) +{ + easy98000_init_common(); + falcon_register_spi_flash(&easy98000_spi_flash_data); +} + +static void __init +easy98000nand_init(void) +{ + easy98000_init_common(); + falcon_register_nand(); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY98000, + "EASY98000", + "EASY98000 Eval Board", + easy98000_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98000SF, + "EASY98000SF", + "EASY98000 Eval Board (Serial Flash)", + easy98000sf_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND, + "EASY98000NAND", + "EASY98000 Eval Board (NAND Flash)", + easy98000nand_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98020.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98020.c new file mode 100644 index 0000000000..4cdfc199db --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/mach-easy98020.c @@ -0,0 +1,118 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <dev-gpio-leds.h> + +#include "../machtypes.h" +#include "devices.h" + +#define EASY98020_GPIO_LED_0 9 +#define EASY98020_GPIO_LED_1 10 +#define EASY98020_GPIO_LED_2 11 +#define EASY98020_GPIO_LED_3 12 +#define EASY98020_GPIO_LED_GE0_ACT 110 +#define EASY98020_GPIO_LED_GE0_LINK 109 +#define EASY98020_GPIO_LED_GE1_ACT 106 +#define EASY98020_GPIO_LED_GE1_LINK 105 + +static struct mtd_partition easy98020_spi_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x40000, /* 2 sectors for redundant env. */ + }, + { + .name = "linux", + .offset = 0x80000, + .size = 0xF80000, /* map only 16 MiB */ + }, +}; + +static struct flash_platform_data easy98020_spi_flash_platform_data = { + .name = "sflash", + .parts = easy98020_spi_partitions, + .nr_parts = ARRAY_SIZE(easy98020_spi_partitions) +}; + +static struct spi_board_info easy98020_spi_flash_data __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .platform_data = &easy98020_spi_flash_platform_data +}; + +static struct gpio_led easy98020_gpio_leds[] __initdata = { + { + .name = "easy98020:green:0", + .gpio = EASY98020_GPIO_LED_0, + .active_low = 0, + }, { + .name = "easy98020:green:1", + .gpio = EASY98020_GPIO_LED_1, + .active_low = 0, + }, { + .name = "easy98020:green:2", + .gpio = EASY98020_GPIO_LED_2, + .active_low = 0, + }, { + .name = "easy98020:green:3", + .gpio = EASY98020_GPIO_LED_3, + .active_low = 0, + }, { + .name = "easy98020:ge0_act", + .gpio = EASY98020_GPIO_LED_GE0_ACT, + .active_low = 0, + }, { + .name = "easy98020:ge0_link", + .gpio = EASY98020_GPIO_LED_GE0_LINK, + .active_low = 0, + }, { + .name = "easy98020:ge1_act", + .gpio = EASY98020_GPIO_LED_GE1_ACT, + .active_low = 0, + }, { + .name = "easy98020:ge1_link", + .gpio = EASY98020_GPIO_LED_GE1_LINK, + .active_low = 0, + } +}; + +static void __init easy98020_init(void) +{ + falcon_register_i2c(); + falcon_register_spi_flash(&easy98020_spi_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(easy98020_gpio_leds), + easy98020_gpio_leds); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY98020, + "EASY98020", + "EASY98020 Eval Board", + easy98020_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98020_1LAN, + "EASY98020_1LAN", + "EASY98020 Eval Board (1 LAN port)", + easy98020_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY98020_2LAN, + "EASY98020_2LAN", + "EASY98020 Eval Board (2 LAN ports)", + easy98020_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/prom.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/prom.c new file mode 100644 index 0000000000..2a4eea1782 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/prom.c @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <lantiq_soc.h> + +#include "devices.h" + +#include "../prom.h" + +#define SOC_FALCON "Falcon" +#define SOC_FALCON_D "Falcon-D" +#define SOC_FALCON_V "Falcon-V" +#define SOC_FALCON_M "Falcon-M" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFF000 +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 +#define SREV_SHIFT 22 +#define SREV_MASK 0x03C00000 +#define TYPE_SHIFT 26 +#define TYPE_MASK 0x3C000000 + +/* this parameter allows us enable/disable asc1 via commandline */ +static int register_asc1; +static int __init +ltq_parse_asc1(char *p) +{ + register_asc1 = 1; + return 0; +} +__setup("use_asc1", ltq_parse_asc1); + +void __init +ltq_soc_setup(void) +{ + ltq_register_asc(0); + ltq_register_wdt(); + falcon_register_gpio(); + if (register_asc1) + ltq_register_asc(1); +} + +void __init +ltq_soc_detect(struct ltq_soc_info *i) +{ + u32 type; + i->partnum = (ltq_r32(LTQ_FALCON_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_FALCON_CHIPID) & REV_MASK) >> REV_SHIFT; + i->srev = ((ltq_r32(LTQ_FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT); + sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'), + i->rev & 0x7, (i->srev & 0x3) + 1); + + switch (i->partnum) { + case SOC_ID_FALCON: + type = (ltq_r32(LTQ_FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT; + switch (type) { + case 0: + i->name = SOC_FALCON_D; + break; + case 1: + i->name = SOC_FALCON_V; + break; + case 2: + i->name = SOC_FALCON_M; + break; + default: + i->name = SOC_FALCON; + break; + } + i->type = SOC_TYPE_FALCON; + break; + + default: + unreachable(); + break; + } +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/reset.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/reset.c new file mode 100644 index 0000000000..cbcadc5c48 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/reset.c @@ -0,0 +1,87 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/pm.h> +#include <asm/reboot.h> +#include <linux/export.h> + +#include <lantiq_soc.h> + +/* CPU0 Reset Source Register */ +#define LTQ_SYS1_CPU0RS 0x0040 +/* reset cause mask */ +#define LTQ_CPU0RS_MASK 0x0003 + +int +ltq_reset_cause(void) +{ + return ltq_sys1_r32(LTQ_SYS1_CPU0RS) & LTQ_CPU0RS_MASK; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +#define BOOT_REG_BASE (KSEG1 | 0x1F200000) +#define BOOT_PW1_REG (BOOT_REG_BASE | 0x20) +#define BOOT_PW2_REG (BOOT_REG_BASE | 0x24) +#define BOOT_PW1 0x4C545100 +#define BOOT_PW2 0x0051544C + +#define WDT_REG_BASE (KSEG1 | 0x1F8803F0) +#define WDT_PW1 0x00BE0000 +#define WDT_PW2 0x00DC0000 + +static void +ltq_machine_restart(char *command) +{ + pr_notice("System restart\n"); + local_irq_disable(); + + /* reboot magic */ + ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */ + ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */ + ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */ + + /* watchdog magic */ + ltq_w32(WDT_PW1, (void *)WDT_REG_BASE); + ltq_w32(WDT_PW2 | + (0x3 << 26) | /* PWL */ + (0x2 << 24) | /* CLKDIV */ + (0x1 << 31) | /* enable */ + (1), /* reload */ + (void *)WDT_REG_BASE); + unreachable(); +} + +static void +ltq_machine_halt(void) +{ + pr_notice("System halted.\n"); + local_irq_disable(); + unreachable(); +} + +static void +ltq_machine_power_off(void) +{ + pr_notice("Please turn off the power now.\n"); + local_irq_disable(); + unreachable(); +} + +static int __init +mips_reboot_setup(void) +{ + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/sysctrl.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/sysctrl.c new file mode 100644 index 0000000000..f27d694826 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/falcon/sysctrl.c @@ -0,0 +1,211 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/clkdev.h> +#include <asm/delay.h> + +#include <lantiq_soc.h> + +#include "devices.h" +#include "../clk.h" + +/* infrastructure control register */ +#define SYS1_INFRAC 0x00bc +/* Configuration fuses for drivers and pll */ +#define STATUS_CONFIG 0x0040 + +/* GPE frequency selection */ +#define GPPC_OFFSET 24 +#define GPEFREQ_MASK 0x00000C0 +#define GPEFREQ_OFFSET 10 +/* Clock status register */ +#define LTQ_SYSCTL_CLKS 0x0000 +/* Clock enable register */ +#define LTQ_SYSCTL_CLKEN 0x0004 +/* Clock clear register */ +#define LTQ_SYSCTL_CLKCLR 0x0008 +/* Activation Status Register */ +#define LTQ_SYSCTL_ACTS 0x0020 +/* Activation Register */ +#define LTQ_SYSCTL_ACT 0x0024 +/* Deactivation Register */ +#define LTQ_SYSCTL_DEACT 0x0028 +/* reboot Register */ +#define LTQ_SYSCTL_RBT 0x002c +/* CPU0 Clock Control Register */ +#define LTQ_SYS1_CPU0CC 0x0040 +/* clock divider bit */ +#define LTQ_CPU0CC_CPUDIV 0x0001 + +static struct resource ltq_sysctl_res[] = { + MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE), + MEM_RES("syseth", LTQ_SYS_ETH_BASE_ADDR, LTQ_SYS_ETH_SIZE), + MEM_RES("sysgpe", LTQ_SYS_GPE_BASE_ADDR, LTQ_SYS_GPE_SIZE), +}; + +static struct resource ltq_status_res = + MEM_RES("status", LTQ_STATUS_BASE_ADDR, LTQ_STATUS_SIZE); +static struct resource ltq_ebu_res = + MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE); + +static void __iomem *ltq_sysctl[3]; +static void __iomem *ltq_status_membase; +void __iomem *ltq_sys1_membase; +void __iomem *ltq_ebu_membase; + +#define ltq_reg_w32(m, x, y) ltq_w32((x), ltq_sysctl[m] + (y)) +#define ltq_reg_r32(m, x) ltq_r32(ltq_sysctl[m] + (x)) +#define ltq_reg_w32_mask(m, clear, set, reg) \ + ltq_reg_w32(m, (ltq_reg_r32(m, reg) & ~(clear)) | (set), reg) + +#define ltq_status_w32(x, y) ltq_w32((x), ltq_status_membase + (y)) +#define ltq_status_r32(x) ltq_r32(ltq_status_membase + (x)) + +static inline void +ltq_sysctl_wait(struct clk *clk, + unsigned int test, unsigned int reg) +{ + int err = 1000000; + + do {} while (--err && ((ltq_reg_r32(clk->module, reg) + & clk->bits) != test)); + if (!err) + pr_err("module de/activation failed %d %08X %08X %08X\n", + clk->module, clk->bits, test, + ltq_reg_r32(clk->module, reg) & clk->bits); +} + +static int +ltq_sysctl_activate(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN); + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_ACT); + ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS); + return 0; +} + +static void +ltq_sysctl_deactivate(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR); + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_DEACT); + ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_ACTS); +} + +static int +ltq_sysctl_clken(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN); + ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_CLKS); + return 0; +} + +static void +ltq_sysctl_clkdis(struct clk *clk) +{ + ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR); + ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_CLKS); +} + +static void +ltq_sysctl_reboot(struct clk *clk) +{ + unsigned int act; + unsigned int bits; + + act = ltq_reg_r32(clk->module, LTQ_SYSCTL_ACT); + bits = ~act & clk->bits; + if (bits != 0) { + ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_CLKEN); + ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_ACT); + ltq_sysctl_wait(clk, bits, LTQ_SYSCTL_ACTS); + } + ltq_reg_w32(clk->module, act & clk->bits, LTQ_SYSCTL_RBT); + ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS); +} + +/* enable the ONU core */ +static void +ltq_gpe_enable(void) +{ + unsigned int freq; + unsigned int status; + + /* if if the clock is already enabled */ + status = ltq_reg_r32(SYSCTL_SYS1, SYS1_INFRAC); + if (status & (1 << (GPPC_OFFSET + 1))) + return; + + if (ltq_status_r32(STATUS_CONFIG) == 0) + freq = 1; /* use 625MHz on unfused chip */ + else + freq = (ltq_status_r32(STATUS_CONFIG) & + GPEFREQ_MASK) >> + GPEFREQ_OFFSET; + + /* apply new frequency */ + ltq_reg_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1), + freq << (GPPC_OFFSET + 2) , SYS1_INFRAC); + udelay(1); + + /* enable new frequency */ + ltq_reg_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC); + udelay(1); +} + +static inline void +clkdev_add_sys(const char *dev, unsigned int module, + unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = NULL; + clk->cl.clk = clk; + clk->module = module; + clk->bits = bits; + clk->activate = ltq_sysctl_activate; + clk->deactivate = ltq_sysctl_deactivate; + clk->enable = ltq_sysctl_clken; + clk->disable = ltq_sysctl_clkdis; + clk->reboot = ltq_sysctl_reboot; + clkdev_add(&clk->cl); +} + +void __init +ltq_soc_init(void) +{ + int i; + + for (i = 0; i < 3; i++) + ltq_sysctl[i] = ltq_remap_resource(<q_sysctl_res[i]); + + ltq_sys1_membase = ltq_sysctl[0]; + ltq_status_membase = ltq_remap_resource(<q_status_res); + ltq_ebu_membase = ltq_remap_resource(<q_ebu_res); + + ltq_gpe_enable(); + + /* get our 3 static rates for cpu, fpi and io clocks */ + if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV) + clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M); + else + clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M); + + /* add our clock domains */ + clkdev_add_sys("falcon_gpio.0", SYSCTL_SYSETH, ACTS_PADCTRL0 | ACTS_P0); + clkdev_add_sys("falcon_gpio.1", SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1); + clkdev_add_sys("falcon_gpio.2", SYSCTL_SYSETH, ACTS_PADCTRL2 | ACTS_P2); + clkdev_add_sys("falcon_gpio.3", SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_P3); + clkdev_add_sys("falcon_gpio.4", SYSCTL_SYS1, ACTS_PADCTRL4 | ACTS_P4); + clkdev_add_sys("ltq_asc.1", SYSCTL_SYS1, ACTS_ASC1_ACT); + clkdev_add_sys("i2c-falcon.0", SYSCTL_SYS1, ACTS_I2C_ACT); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/Kconfig b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/Kconfig new file mode 100644 index 0000000000..f351a189a7 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/Kconfig @@ -0,0 +1,16 @@ +if SOC_SVIP + +menu "Mips Machine" + +config LANTIQ_MACH_EASY33016 + bool "Easy33016" + default y + +config LANTIQ_MACH_EASY336 + select SYS_SUPPORTS_LITTLE_ENDIAN + bool "Easy336" + default y + +endmenu + +endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/Makefile b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/Makefile new file mode 100644 index 0000000000..405d652191 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/Makefile @@ -0,0 +1,3 @@ +obj-y := devices.o prom.o reset.o clk-svip.o gpio.o dma.o switchip_setup.o pms.o mux.o +obj-$(CONFIG_LANTIQ_MACH_EASY33016) += mach-easy33016.o +obj-$(CONFIG_LANTIQ_MACH_EASY336) += mach-easy336.o diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/clk-svip.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/clk-svip.c new file mode 100644 index 0000000000..4a14df509f --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/clk-svip.c @@ -0,0 +1,100 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/time.h> + +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> +#include <base_reg.h> +#include <sys0_reg.h> +#include <sys1_reg.h> +#include <status_reg.h> + +static struct svip_reg_status *const status = +(struct svip_reg_status *)LTQ_STATUS_BASE; +static struct svip_reg_sys0 *const sys0 = (struct svip_reg_sys0 *)LTQ_SYS0_BASE; +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; + +unsigned int ltq_svip_io_region_clock(void) +{ + return 200000000; /* 200 MHz */ +} +EXPORT_SYMBOL(ltq_svip_io_region_clock); + +unsigned int ltq_svip_cpu_hz(void) +{ + /* Magic BootROM speed location... */ + if ((*(u32 *)0x9fc07ff0) == 1) + return *(u32 *)0x9fc07ff4; + + if (STATUS_CONFIG_CLK_MODE_GET(status_r32(config)) == 1) { + /* xT16 */ + return 393216000; + } else { + switch (SYS0_PLL1CR_PLLDIV_GET(sys0_r32(pll1cr))) { + case 3: + return 475000000; + case 2: + return 450000000; + case 1: + return 425000000; + default: + return 400000000; + } + } +} +EXPORT_SYMBOL(ltq_svip_cpu_hz); + +unsigned int ltq_svip_fpi_hz(void) +{ + u32 fbs0_div[2] = {4, 8}; + u32 div; + + div = SYS1_FPICR_FPIDIV_GET(sys1_r32(fpicr)); + return ltq_svip_cpu_hz()/fbs0_div[div]; +} +EXPORT_SYMBOL(ltq_svip_fpi_hz); + +unsigned int ltq_get_ppl_hz(void) +{ + /* Magic BootROM speed location... */ + if ((*(u32 *)0x9fc07ff0) == 1) + return *(u32 *)0x9fc07ff4; + + if (STATUS_CONFIG_CLK_MODE_GET(status_r32(config)) == 1) { + /* xT16 */ + return 393216000; + } else { + switch (SYS0_PLL1CR_PLLDIV_GET(sys0_r32(pll1cr))) { + case 3: + return 475000000; + case 2: + return 450000000; + case 1: + return 425000000; + default: + return 400000000; + } + } +} + +unsigned int ltq_get_fbs0_hz(void) +{ + u32 fbs0_div[2] = {4, 8}; + u32 div; + + div = SYS1_FPICR_FPIDIV_GET(sys1_r32(fpicr)); + return ltq_get_ppl_hz()/fbs0_div[div]; +} +EXPORT_SYMBOL(ltq_get_fbs0_hz); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/devices.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/devices.c new file mode 100644 index 0000000000..735b9419f7 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/devices.c @@ -0,0 +1,380 @@ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/mtd/nand.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq.h> + +#include <base_reg.h> +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <ebu_reg.h> + +#include "devices.h" + +#include <lantiq_soc.h> +#include <svip_mux.h> +#include <svip_pms.h> + +/* ASC */ +void __init svip_register_asc(int port) +{ + switch (port) { + case 0: + ltq_register_asc(0); + svip_sys1_clk_enable(SYS1_CLKENR_ASC0); + break; + case 1: + ltq_register_asc(1); + svip_sys1_clk_enable(SYS1_CLKENR_ASC1); + break; + default: + break; + }; +} + +/* Ethernet */ +static unsigned char svip_ethaddr[6] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; + +static struct platform_device ltq_mii = { + .name = "ifxmips_mii0", + .dev = { + .platform_data = svip_ethaddr, + }, +}; + +static int __init svip_set_ethaddr(char *str) +{ + sscanf(str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", + &svip_ethaddr[0], &svip_ethaddr[1], &svip_ethaddr[2], + &svip_ethaddr[3], &svip_ethaddr[4], &svip_ethaddr[5]); + return 0; +} +__setup("ethaddr=", svip_set_ethaddr); + +void __init svip_register_eth(void) +{ + if (!is_valid_ether_addr(svip_ethaddr)) + random_ether_addr(svip_ethaddr); + + platform_device_register(<q_mii); + svip_sys1_clk_enable(SYS1_CLKENR_ETHSW); +} + +/* Virtual Ethernet */ +static struct platform_device ltq_ve = { + .name = "ifxmips_svip_ve", +}; + +void __init svip_register_virtual_eth(void) +{ + platform_device_register(<q_ve); +} + +/* SPI */ +static void __init ltq_register_ssc(int bus_num, unsigned long base, int irq_rx, + int irq_tx, int irq_err, int irq_frm) +{ + struct resource res[] = { + { + .name = "regs", + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "rx", + .start = irq_rx, + .flags = IORESOURCE_IRQ, + }, { + .name = "tx", + .start = irq_tx, + .flags = IORESOURCE_IRQ, + }, { + .name = "err", + .start = irq_err, + .flags = IORESOURCE_IRQ, + }, { + .name = "frm", + .start = irq_frm, + .flags = IORESOURCE_IRQ, + }, + }; + + platform_device_register_simple("ifx_ssc", bus_num, res, + ARRAY_SIZE(res)); +} + +static struct spi_board_info bdinfo[] __initdata = { + { + .modalias = "xt16", + .mode = SPI_MODE_3, + .irq = INT_NUM_IM5_IRL0 + 28, + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 1, + }, + { + .modalias = "xt16", + .mode = SPI_MODE_3, + .irq = INT_NUM_IM5_IRL0 + 19, + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 2, + }, + { + .modalias = "loop", + .mode = SPI_MODE_0 | SPI_LOOP, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 3, + }, +}; + +void __init svip_register_spi(void) +{ + + ltq_register_ssc(0, LTQ_SSC0_BASE, INT_NUM_IM1_IRL0 + 6, + INT_NUM_IM1_IRL0 + 7, INT_NUM_IM1_IRL0 + 8, + INT_NUM_IM1_IRL0 + 9); + + ltq_register_ssc(1, LTQ_SSC1_BASE, INT_NUM_IM1_IRL0 + 10, + INT_NUM_IM1_IRL0 + 11, INT_NUM_IM1_IRL0 + 12, + INT_NUM_IM1_IRL0 + 13); + + spi_register_board_info(bdinfo, ARRAY_SIZE(bdinfo)); + + svip_sys1_clk_enable(SYS1_CLKENR_SSC0 | SYS1_CLKENR_SSC1); +} + +void __init svip_register_spi_flash(struct spi_board_info *bdinfo) +{ + spi_register_board_info(bdinfo, 1); +} + +/* GPIO */ +static struct platform_device ltq_gpio = { + .name = "ifxmips_gpio", +}; + +void __init svip_register_gpio(void) +{ + platform_device_register(<q_gpio); +} + +/* MUX */ +static struct ltq_mux_settings ltq_mux_settings; + +static struct platform_device ltq_mux = { + .name = "ltq_mux", + .dev = { + .platform_data = <q_mux_settings, + } +}; + +void __init svip_register_mux(const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS], + const struct ltq_mux_pin mux_p1[LTQ_MUX_P1_PINS], + const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS], + const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS], + const struct ltq_mux_pin mux_p4[LTQ_MUX_P4_PINS]) +{ + ltq_mux_settings.mux_p0 = mux_p0; + ltq_mux_settings.mux_p1 = mux_p1; + ltq_mux_settings.mux_p2 = mux_p2; + ltq_mux_settings.mux_p3 = mux_p3; + ltq_mux_settings.mux_p4 = mux_p4; + + if (mux_p0) + svip_sys1_clk_enable(SYS1_CLKENR_PORT0); + + if (mux_p1) + svip_sys1_clk_enable(SYS1_CLKENR_PORT1); + + if (mux_p2) + svip_sys1_clk_enable(SYS1_CLKENR_PORT2); + + if (mux_p3) + svip_sys1_clk_enable(SYS1_CLKENR_PORT3); + + if (mux_p4) + svip_sys2_clk_enable(SYS2_CLKENR_PORT4); + + platform_device_register(<q_mux); +} + +/* NAND */ +#define NAND_ADDR_REGION_BASE (LTQ_EBU_SEG1_BASE) +#define NAND_CLE_BIT (1 << 3) +#define NAND_ALE_BIT (1 << 2) + +static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE; + +static int svip_nand_probe(struct platform_device *pdev) +{ + ebu_w32(LTQ_EBU_ADDR_SEL_0_BASE_VAL(CPHYSADDR(NAND_ADDR_REGION_BASE) + >> 12) + | LTQ_EBU_ADDR_SEL_0_MASK_VAL(15) + | LTQ_EBU_ADDR_SEL_0_MRME_VAL(0) + | LTQ_EBU_ADDR_SEL_0_REGEN_VAL(1), + addr_sel_0); + + ebu_w32(LTQ_EBU_CON_0_WRDIS_VAL(0) + | LTQ_EBU_CON_0_ADSWP_VAL(1) + | LTQ_EBU_CON_0_AGEN_VAL(0x00) + | LTQ_EBU_CON_0_SETUP_VAL(1) + | LTQ_EBU_CON_0_WAIT_VAL(0x00) + | LTQ_EBU_CON_0_WINV_VAL(0) + | LTQ_EBU_CON_0_PW_VAL(0x00) + | LTQ_EBU_CON_0_ALEC_VAL(0) + | LTQ_EBU_CON_0_BCGEN_VAL(0x01) + | LTQ_EBU_CON_0_WAITWRC_VAL(1) + | LTQ_EBU_CON_0_WAITRDC_VAL(1) + | LTQ_EBU_CON_0_HOLDC_VAL(1) + | LTQ_EBU_CON_0_RECOVC_VAL(0) + | LTQ_EBU_CON_0_CMULT_VAL(0x01), + con_0); + + /* + * ECC disabled + * CLE, ALE and CS are pulse, all other signal are latches based + * CLE and ALE are active high, PRE, WP, SE and CS/CE are active low + * OUT_CS_S is disabled + * NAND mode is disabled + */ + ebu_w32(LTQ_EBU_NAND_CON_ECC_ON_VAL(0) + | LTQ_EBU_NAND_CON_LAT_EN_VAL(0x38) + | LTQ_EBU_NAND_CON_OUT_CS_S_VAL(0) + | LTQ_EBU_NAND_CON_IN_CS_S_VAL(0) + | LTQ_EBU_NAND_CON_PRE_P_VAL(1) + | LTQ_EBU_NAND_CON_WP_P_VAL(1) + | LTQ_EBU_NAND_CON_SE_P_VAL(1) + | LTQ_EBU_NAND_CON_CS_P_VAL(1) + | LTQ_EBU_NAND_CON_CLE_P_VAL(0) + | LTQ_EBU_NAND_CON_ALE_P_VAL(0) + | LTQ_EBU_NAND_CON_CSMUX_E_VAL(0) + | LTQ_EBU_NAND_CON_NANDMODE_VAL(0), + nand_con); + + return 0; +} + +static void svip_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long adr; + /* Coming here means to change either the enable state or + * the address for controlling ALE or CLE */ + + /* NAND_NCE: Select the chip by setting nCE to low. + * This is done in CON register */ + if (ctrl & NAND_NCE) + ebu_w32_mask(0, LTQ_EBU_NAND_CON_NANDMODE_VAL(1), + nand_con); + else + ebu_w32_mask(LTQ_EBU_NAND_CON_NANDMODE_VAL(1), + 0, nand_con); + + /* The addressing of CLE or ALE is done via different addresses. + We are now changing the address depending on the given action + SVIPs NAND_CLE_BIT = (1 << 3), NAND_CLE = 0x02 + NAND_ALE_BIT = (1 << 2) = NAND_ALE (0x04) */ + adr = (unsigned long)this->IO_ADDR_W; + adr &= ~(NAND_CLE_BIT | NAND_ALE_BIT); + adr |= (ctrl & NAND_CLE) << 2 | (ctrl & NAND_ALE); + this->IO_ADDR_W = (void __iomem *)adr; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int svip_nand_ready(struct mtd_info *mtd) +{ + return (ebu_r32(nand_wait) & 0x01) == 0x01; +} + +static inline void svip_nand_wait(void) +{ + static const int nops = 150; + int i; + + for (i = 0; i < nops; i++) + asm("nop"); +} + +static void svip_nand_write_buf(struct mtd_info *mtd, + const u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) { + writeb(buf[i], this->IO_ADDR_W); + svip_nand_wait(); + } +} + +static void svip_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) { + buf[i] = readb(this->IO_ADDR_R); + svip_nand_wait(); + } +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data svip_flash_nand_data = { + .chip = { + .nr_chips = 1, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = svip_nand_probe, + .cmd_ctrl = svip_nand_hwcontrol, + .dev_ready = svip_nand_ready, + .write_buf = svip_nand_write_buf, + .read_buf = svip_nand_read_buf, + } +}; + +static struct resource svip_nand_resources[] = { + MEM_RES("nand", LTQ_FLASH_START, LTQ_FLASH_MAX), +}; + +static struct platform_device svip_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = ARRAY_SIZE(svip_nand_resources), + .resource = svip_nand_resources, + .dev = { + .platform_data = &svip_flash_nand_data, + }, +}; + +void __init svip_register_nand(void) +{ + platform_device_register(&svip_flash_nand); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/devices.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/devices.h new file mode 100644 index 0000000000..a064e67ec1 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/devices.h @@ -0,0 +1,23 @@ +#ifndef _SVIP_DEVICES_H__ +#define _SVIP_DEVICES_H__ + +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <svip_mux.h> +#include "../devices.h" + +extern void __init svip_register_asc(int port); +extern void __init svip_register_eth(void); +extern void __init svip_register_virtual_eth(void); +extern void __init svip_register_spi(void); +extern void __init svip_register_spi_flash(struct spi_board_info *bdinfo); +extern void __init svip_register_gpio(void); +extern void __init svip_register_mux(const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS], + const struct ltq_mux_pin mux_p1[LTQ_MUX_P1_PINS], + const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS], + const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS], + const struct ltq_mux_pin mux_p4[LTQ_MUX_P4_PINS]); +extern void __init svip_register_nand(void); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/dma.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/dma.c new file mode 100644 index 0000000000..7464be1bd5 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/dma.c @@ -0,0 +1,1206 @@ +/* + ** Copyright (C) 2005 Wu Qi Ming <Qi-Ming.Wu@infineon.com> + ** + ** This program is free software; you can redistribute it and/or modify + ** it under the terms of the GNU General Public License as published by + ** the Free Software Foundation; either version 2 of the License, or + ** (at your option) any later version. + ** + ** This program is distributed in the hope that it will be useful, + ** but WITHOUT ANY WARRANTY; without even the implied warranty of + ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + ** GNU General Public License for more details. + ** + ** You should have received a copy of the GNU General Public License + ** along with this program; if not, write to the Free Software + ** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/* + * Description: + * Driver for SVIP DMA + * Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] + * Created: 26-September-2005 + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/selection.h> +#include <linux/kmod.h> +#include <linux/vmalloc.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/semaphore.h> + +#include <base_reg.h> +#include <mps_reg.h> +#include <dma_reg.h> +#include <svip_dma.h> +#include <lantiq_soc.h> +#include <irq.h> +#include <sys1_reg.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_dma *const dma = (struct svip_reg_dma *)LTQ_DMA_BASE; +static struct svip_reg_mbs *const mbs = (struct svip_reg_mbs *)LTQ_MBS_BASE; + +#define DRV_NAME "ltq_dma" +extern void ltq_mask_and_ack_irq(struct irq_data *data); +extern void ltq_enable_irq(struct irq_data *data); + +static inline void mask_and_ack_irq(unsigned int irq_nr) +{ + static int i = 0; + struct irq_data data; + data.irq = irq_nr; + if ((i < 2) && (irq_nr == 137)) { + printk("eth delay hack\n"); + i++; + } + ltq_mask_and_ack_irq(&data); +} + +static inline void svip_enable_irq(unsigned int irq_nr) +{ + struct irq_data data; + data.irq = irq_nr; + ltq_enable_irq(&data); +} + +#define DMA_EMSG(fmt, args...) \ + printk(KERN_ERR "%s: " fmt, __func__, ## args) + +static inline void mbs_grab(void) +{ + while (mbs_r32(mbsr0) != 0); +} + +static inline void mbs_release(void) +{ + mbs_w32(0, mbsr0); + asm("sync"); +} + +/* max ports connecting to dma */ +#define LTQ_MAX_DMA_DEVICE_NUM ARRAY_SIZE(dma_devices) +/* max dma channels */ +#define LTQ_MAX_DMA_CHANNEL_NUM ARRAY_SIZE(dma_chan) + +/* bytes per descriptor */ +#define DMA_DESCR_SIZE 8 + +#define DMA_DESCR_CH_SIZE (DMA_DESCR_NUM * DMA_DESCR_SIZE) +#define DMA_DESCR_TOTAL_SIZE (LTQ_MAX_DMA_CHANNEL_NUM * DMA_DESCR_CH_SIZE) +#define DMA_DESCR_MEM_PAGES ((DMA_DESCR_TOTAL_SIZE / PAGE_SIZE) + \ + (((DMA_DESCR_TOTAL_SIZE % PAGE_SIZE) > 0))) + +/* budget for interrupt handling */ +#define DMA_INT_BUDGET 100 +/* set the correct counter value here! */ +#define DMA_POLL_COUNTER 32 + +struct proc_dir_entry *g_dma_dir; + +/* device_name | max_rx_chan_num | max_tx_chan_num | drop_enable */ +struct dma_device_info dma_devices[] = { + { "SW", 4, 4, 0 }, + { "DEU", 1, 1, 0 }, + { "SSC0", 1, 1, 0 }, + { "SSC1", 1, 1, 0 }, + { "MCTRL", 1, 1, 0 }, + { "PCM0", 1, 1, 0 }, + { "PCM1", 1, 1, 0 }, + { "PCM2", 1, 1, 0 }, + { "PCM3", 1, 1, 0 } +}; + +/* *dma_dev | dir | pri | irq | rel_chan_no */ +struct dma_channel_info dma_chan[] = { + { &dma_devices[0], DIR_RX, 0, INT_NUM_IM4_IRL0 + 0, 0 }, + { &dma_devices[0], DIR_TX, 0, INT_NUM_IM4_IRL0 + 1, 0 }, + { &dma_devices[0], DIR_RX, 1, INT_NUM_IM4_IRL0 + 2, 1 }, + { &dma_devices[0], DIR_TX, 1, INT_NUM_IM4_IRL0 + 3, 1 }, + { &dma_devices[0], DIR_RX, 2, INT_NUM_IM4_IRL0 + 4, 2 }, + { &dma_devices[0], DIR_TX, 2, INT_NUM_IM4_IRL0 + 5, 2 }, + { &dma_devices[0], DIR_RX, 3, INT_NUM_IM4_IRL0 + 6, 3 }, + { &dma_devices[0], DIR_TX, 3, INT_NUM_IM4_IRL0 + 7, 3 }, + { &dma_devices[1], DIR_RX, 0, INT_NUM_IM4_IRL0 + 8, 0 }, + { &dma_devices[1], DIR_TX, 0, INT_NUM_IM4_IRL0 + 9, 0 }, + { &dma_devices[2], DIR_RX, 0, INT_NUM_IM4_IRL0 + 10, 0 }, + { &dma_devices[2], DIR_TX, 0, INT_NUM_IM4_IRL0 + 11, 0 }, + { &dma_devices[3], DIR_RX, 0, INT_NUM_IM4_IRL0 + 12, 0 }, + { &dma_devices[3], DIR_TX, 0, INT_NUM_IM4_IRL0 + 13, 0 }, + { &dma_devices[4], DIR_RX, 0, INT_NUM_IM4_IRL0 + 14, 0 }, + { &dma_devices[4], DIR_TX, 0, INT_NUM_IM4_IRL0 + 15, 0 }, + { &dma_devices[5], DIR_RX, 0, INT_NUM_IM4_IRL0 + 16, 0 }, + { &dma_devices[5], DIR_TX, 0, INT_NUM_IM4_IRL0 + 17, 0 }, + { &dma_devices[6], DIR_RX, 1, INT_NUM_IM3_IRL0 + 18, 0 }, + { &dma_devices[6], DIR_TX, 1, INT_NUM_IM3_IRL0 + 19, 0 }, + { &dma_devices[7], DIR_RX, 2, INT_NUM_IM4_IRL0 + 20, 0 }, + { &dma_devices[7], DIR_TX, 2, INT_NUM_IM4_IRL0 + 21, 0 }, + { &dma_devices[8], DIR_RX, 3, INT_NUM_IM4_IRL0 + 22, 0 }, + { &dma_devices[8], DIR_TX, 3, INT_NUM_IM4_IRL0 + 23, 0 } +}; + +u64 *g_desc_list[DMA_DESCR_MEM_PAGES]; + +volatile u32 g_dma_int_status = 0; + +/* 0 - not in process, 1 - in process */ +volatile int g_dma_in_process; + +int ltq_dma_init(void); +void do_dma_tasklet(unsigned long); +DECLARE_TASKLET(dma_tasklet, do_dma_tasklet, 0); +irqreturn_t dma_interrupt(int irq, void *dev_id); + +u8 *common_buffer_alloc(int len, int *byte_offset, void **opt) +{ + u8 *buffer = kmalloc(len * sizeof(u8), GFP_KERNEL); + *byte_offset = 0; + return buffer; +} + +void common_buffer_free(u8 *dataptr, void *opt) +{ + kfree(dataptr); +} + +void enable_ch_irq(struct dma_channel_info *ch) +{ + int chan_no = (int)(ch - dma_chan); + unsigned long flag; + u32 val; + + if (ch->dir == DIR_RX) + val = DMA_CIE_DESCPT | DMA_CIE_DUR; + else + val = DMA_CIE_DESCPT; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(val, cie); + dma_w32_mask(0, 1 << chan_no, irnen); + mbs_release(); + local_irq_restore(flag); + + svip_enable_irq(ch->irq); +} + +void disable_ch_irq(struct dma_channel_info *ch) +{ + unsigned long flag; + int chan_no = (int)(ch - dma_chan); + + local_irq_save(flag); + g_dma_int_status &= ~(1 << chan_no); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(0, cie); + mbs_release(); + dma_w32_mask(1 << chan_no, 0, irnen); + local_irq_restore(flag); + + mask_and_ack_irq(ch->irq); +} + +int open_chan(struct dma_channel_info *ch) +{ + unsigned long flag; + int j; + int chan_no = (int)(ch - dma_chan); + u8 *buffer; + int byte_offset; + struct rx_desc *rx_desc_p; + struct tx_desc *tx_desc_p; + + if (ch->control == LTQ_DMA_CH_ON) + return -1; + + if (ch->dir == DIR_RX) { + for (j = 0; j < ch->desc_len; j++) { + rx_desc_p = (struct rx_desc *)ch->desc_base+j; + buffer = ch->dma_dev->buffer_alloc(ch->packet_size, + &byte_offset, + (void *)&ch->opt[j]); + if (!buffer) + return -ENOBUFS; + + rx_desc_p->data_pointer = (u32)CPHYSADDR((u32)buffer); + rx_desc_p->status.word = 0; + rx_desc_p->status.field.byte_offset = byte_offset; + rx_desc_p->status.field.data_length = ch->packet_size; + rx_desc_p->status.field.own = DMA_OWN; + } + } else { + for (j = 0; j < ch->desc_len; j++) { + tx_desc_p = (struct tx_desc *)ch->desc_base + j; + tx_desc_p->data_pointer = 0; + tx_desc_p->status.word = 0; + } + } + ch->xfer_cnt = 0; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(ch->desc_len, cdlen); + dma_w32(0x7e, cis); + dma_w32(DMA_CCTRL_TXWGT_VAL(ch->tx_weight) + | DMA_CCTRL_CLASS_VAL(ch->pri) + | (ch->dir == DIR_RX ? DMA_CCTRL_ON_OFF : 0), cctrl); + mbs_release(); + ch->control = LTQ_DMA_CH_ON; + local_irq_restore(flag); + + if (request_irq(ch->irq, dma_interrupt, + IRQF_DISABLED, "dma-core", (void *)ch) != 0) { + printk(KERN_ERR "error, cannot get dma_irq!\n"); + return -EFAULT; + } + + enable_ch_irq(ch); + return 0; +} + +int close_chan(struct dma_channel_info *ch) +{ + unsigned long flag; + int j; + int chan_no = (int)(ch - dma_chan); + struct rx_desc *desc_p; + + if (ch->control == LTQ_DMA_CH_OFF) + return -1; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32_mask(DMA_CCTRL_ON_OFF, 0, cctrl); + mbs_release(); + disable_ch_irq(ch); + free_irq(ch->irq, (void *)ch); + ch->control = LTQ_DMA_CH_OFF; + local_irq_restore(flag); + + /* free descriptors in use */ + for (j = 0; j < ch->desc_len; j++) { + desc_p = (struct rx_desc *)ch->desc_base+j; + if ((desc_p->status.field.own == CPU_OWN && + desc_p->status.field.c) || + (desc_p->status.field.own == DMA_OWN)) { + if (desc_p->data_pointer) { + ch->dma_dev->buffer_free((u8 *)__va(desc_p->data_pointer), + (void *)ch->opt[j]); + desc_p->data_pointer = (u32)NULL; + } + } + } + + return 0; +} + +int reset_chan(struct dma_channel_info *ch) +{ + unsigned long flag; + int val; + int chan_no = (int)(ch - dma_chan); + + close_chan(ch); + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32_mask(0, DMA_CCTRL_RST, cctrl); + mbs_release(); + local_irq_restore(flag); + + do { + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + val = dma_r32(cctrl); + mbs_release(); + local_irq_restore(flag); + } while (val & DMA_CCTRL_RST); + + return 0; +} + +static inline void rx_chan_intr_handler(int chan_no) +{ + struct dma_device_info *dma_dev = (struct dma_device_info *) + dma_chan[chan_no].dma_dev; + struct dma_channel_info *ch = &dma_chan[chan_no]; + struct rx_desc *rx_desc_p; + unsigned long flag; + u32 val; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + val = dma_r32(cis); + dma_w32(DMA_CIS_DESCPT, cis); + mbs_release(); + + /* handle command complete interrupt */ + rx_desc_p = (struct rx_desc *)ch->desc_base + ch->curr_desc; + if ((rx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) == + DMA_DESC_CPT_SET) { + local_irq_restore(flag); + /* Every thing is correct, then we inform the upper layer */ + dma_dev->current_rx_chan = ch->rel_chan_no; + if (dma_dev->intr_handler) + dma_dev->intr_handler(dma_dev, RCV_INT); + ch->weight--; + } else { + g_dma_int_status &= ~(1 << chan_no); + local_irq_restore(flag); + svip_enable_irq(dma_chan[chan_no].irq); + } +} + +static inline void tx_chan_intr_handler(int chan_no) +{ + struct dma_device_info *dma_dev = (struct dma_device_info *) + dma_chan[chan_no].dma_dev; + struct dma_channel_info *ch = &dma_chan[chan_no]; + struct tx_desc *tx_desc_p; + unsigned long flag; + + local_irq_save(flag); + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32(DMA_CIS_DESCPT, cis); + mbs_release(); + + tx_desc_p = (struct tx_desc *)ch->desc_base+ch->prev_desc; + if ((tx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) == + DMA_DESC_CPT_SET) { + local_irq_restore(flag); + + dma_dev->buffer_free((u8 *)__va(tx_desc_p->data_pointer), + ch->opt[ch->prev_desc]); + memset(tx_desc_p, 0, sizeof(struct tx_desc)); + dma_dev->current_tx_chan = ch->rel_chan_no; + if (dma_dev->intr_handler) + dma_dev->intr_handler(dma_dev, TRANSMIT_CPT_INT); + ch->weight--; + + ch->prev_desc = (ch->prev_desc + 1) % (ch->desc_len); + } else { + g_dma_int_status &= ~(1 << chan_no); + local_irq_restore(flag); + svip_enable_irq(dma_chan[chan_no].irq); + } +} + +void do_dma_tasklet(unsigned long unused) +{ + int i; + int chan_no = 0; + int budget = DMA_INT_BUDGET; + int weight = 0; + unsigned long flag; + + while (g_dma_int_status) { + if (budget-- < 0) { + tasklet_schedule(&dma_tasklet); + return; + } + chan_no = -1; + weight = 0; + /* WFQ algorithm to select the channel */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + if (g_dma_int_status & (1 << i) && + dma_chan[i].weight > 0) { + if (dma_chan[i].weight > weight) { + chan_no = i; + weight = dma_chan[chan_no].weight; + } + } + } + if (chan_no >= 0) { + if (dma_chan[chan_no].dir == DIR_RX) + rx_chan_intr_handler(chan_no); + else + tx_chan_intr_handler(chan_no); + } else { + /* reset all the channels */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) + dma_chan[i].weight = dma_chan[i].default_weight; + } + } + + local_irq_save(flag); + g_dma_in_process = 0; + if (g_dma_int_status) { + g_dma_in_process = 1; + tasklet_schedule(&dma_tasklet); + } + local_irq_restore(flag); +} + +irqreturn_t dma_interrupt(int irq, void *dev_id) +{ + struct dma_channel_info *ch; + int chan_no = 0; + + ch = (struct dma_channel_info *)dev_id; + chan_no = (int)(ch - dma_chan); + + if ((unsigned)chan_no >= LTQ_MAX_DMA_CHANNEL_NUM) { + printk(KERN_ERR "error: dma_interrupt irq=%d chan_no=%d\n", + irq, chan_no); + } + + g_dma_int_status |= 1 << chan_no; + dma_w32(1 << chan_no, irncr); + mask_and_ack_irq(irq); + + if (!g_dma_in_process) { + g_dma_in_process = 1; + tasklet_schedule(&dma_tasklet); + } + + return IRQ_RETVAL(1); +} + +struct dma_device_info *dma_device_reserve(char *dev_name) +{ + int i; + + ltq_dma_init(); + for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) { + if (strcmp(dev_name, dma_devices[i].device_name) == 0) { + if (dma_devices[i].reserved) + return NULL; + dma_devices[i].reserved = 1; + break; + } + } + + if (i == LTQ_MAX_DMA_DEVICE_NUM) + return NULL; + + return &dma_devices[i]; +} +EXPORT_SYMBOL(dma_device_reserve); + +int dma_device_release(struct dma_device_info *dma_dev) +{ + dma_dev->reserved = 0; + + return 0; +} +EXPORT_SYMBOL(dma_device_release); + +int dma_device_register(struct dma_device_info *dma_dev) +{ + int port_no = (int)(dma_dev - dma_devices); + int txbl, rxbl; + unsigned long flag; + + switch (dma_dev->tx_burst_len) { + case 8: + txbl = 3; + break; + case 4: + txbl = 2; + break; + default: + txbl = 1; + break; + } + + switch (dma_dev->rx_burst_len) { + case 8: + rxbl = 3; + break; + case 4: + rxbl = 2; + break; + default: + rxbl = 1; + } + + local_irq_save(flag); + mbs_grab(); + dma_w32(port_no, ps); + dma_w32(DMA_PCTRL_TXWGT_VAL(dma_dev->tx_weight) + | DMA_PCTRL_TXENDI_VAL(dma_dev->tx_endianness_mode) + | DMA_PCTRL_RXENDI_VAL(dma_dev->rx_endianness_mode) + | DMA_PCTRL_PDEN_VAL(dma_dev->drop_enable) + | DMA_PCTRL_TXBL_VAL(txbl) + | DMA_PCTRL_RXBL_VAL(rxbl), pctrl); + mbs_release(); + local_irq_restore(flag); + + return 0; +} +EXPORT_SYMBOL(dma_device_register); + +int dma_device_unregister(struct dma_device_info *dma_dev) +{ + int i; + int port_no = (int)(dma_dev - dma_devices); + unsigned long flag; + + /* flush memcopy module; has no effect for other ports */ + local_irq_save(flag); + mbs_grab(); + dma_w32(port_no, ps); + dma_w32_mask(0, DMA_PCTRL_GPC, pctrl); + mbs_release(); + local_irq_restore(flag); + + for (i = 0; i < dma_dev->max_tx_chan_num; i++) + reset_chan(dma_dev->tx_chan[i]); + + for (i = 0; i < dma_dev->max_rx_chan_num; i++) + reset_chan(dma_dev->rx_chan[i]); + + return 0; +} +EXPORT_SYMBOL(dma_device_unregister); + +/** + * Read Packet from DMA Rx channel. + * The function gets the data from the current rx descriptor assigned + * to the passed DMA device and passes it back to the caller. + * The function is called in the context of DMA interrupt. + * In detail the following actions are done: + * - get current receive descriptor + * - allocate memory via allocation callback function + * - pass data from descriptor to allocated memory + * - update channel weight + * - release descriptor + * - update current descriptor position + * + * \param *dma_dev - pointer to DMA device structure + * \param **dataptr - pointer to received data + * \param **opt + * \return packet length - length of received data + * \ingroup Internal + */ +int dma_device_read(struct dma_device_info *dma_dev, u8 **dataptr, void **opt) +{ + u8 *buf; + int len; + int byte_offset = 0; + void *p = NULL; + + struct dma_channel_info *ch = + dma_dev->rx_chan[dma_dev->current_rx_chan]; + + struct rx_desc *rx_desc_p; + + /* get the rx data first */ + rx_desc_p = (struct rx_desc *)ch->desc_base+ch->curr_desc; + buf = (u8 *)__va(rx_desc_p->data_pointer); + *(u32 *)dataptr = (u32)buf; + len = rx_desc_p->status.field.data_length; +#ifndef CONFIG_MIPS_UNCACHED + dma_cache_inv((unsigned long)buf, len); +#endif + if (opt) + *(int *)opt = (int)ch->opt[ch->curr_desc]; + + /* replace with a new allocated buffer */ + buf = dma_dev->buffer_alloc(ch->packet_size, &byte_offset, &p); + if (buf) { + ch->opt[ch->curr_desc] = p; + + wmb(); + rx_desc_p->data_pointer = (u32)CPHYSADDR((u32)buf); + rx_desc_p->status.word = (DMA_OWN << 31) \ + |(byte_offset << 23) \ + | ch->packet_size; + + wmb(); + } else { + *(u32 *)dataptr = 0; + if (opt) + *(int *)opt = 0; + } + + ch->xfer_cnt++; + /* increase the curr_desc pointer */ + ch->curr_desc++; + if (ch->curr_desc == ch->desc_len) + ch->curr_desc = 0; + /* return the length of the received packet */ + return len; +} +EXPORT_SYMBOL(dma_device_read); + +/** + * Write Packet through DMA Tx channel to peripheral. + * + * \param *dma_dev - pointer to DMA device structure + * \param *dataptr - pointer to data to be sent + * \param len - amount of data bytes to be sent + * \param *opt + * \return len - length of transmitted data + * \ingroup Internal + */ +int dma_device_write(struct dma_device_info *dma_dev, u8 *dataptr, int len, + void *opt) +{ + unsigned long flag; + u32 byte_offset; + struct dma_channel_info *ch; + int chan_no; + struct tx_desc *tx_desc_p; + local_irq_save(flag); + + ch = dma_dev->tx_chan[dma_dev->current_tx_chan]; + chan_no = (int)(ch - dma_chan); + + if (ch->control == LTQ_DMA_CH_OFF) { + local_irq_restore(flag); + printk(KERN_ERR "%s: dma channel %d not enabled!\n", + __func__, chan_no); + return 0; + } + + tx_desc_p = (struct tx_desc *)ch->desc_base+ch->curr_desc; + /* Check whether this descriptor is available */ + if (tx_desc_p->status.word & (DMA_DESC_OWN_DMA | DMA_DESC_CPT_SET)) { + /* if not , the tell the upper layer device */ + dma_dev->intr_handler(dma_dev, TX_BUF_FULL_INT); + local_irq_restore(flag); + return 0; + } + ch->opt[ch->curr_desc] = opt; + /* byte offset----to adjust the starting address of the data buffer, + * should be multiple of the burst length.*/ + byte_offset = ((u32)CPHYSADDR((u32)dataptr)) % + (dma_dev->tx_burst_len * 4); +#ifndef CONFIG_MIPS_UNCACHED + dma_cache_wback((unsigned long)dataptr, len); + wmb(); +#endif + tx_desc_p->data_pointer = (u32)CPHYSADDR((u32)dataptr) - byte_offset; + wmb(); + tx_desc_p->status.word = (DMA_OWN << 31) + | DMA_DESC_SOP_SET + | DMA_DESC_EOP_SET + | (byte_offset << 23) + | len; + wmb(); + + if (ch->xfer_cnt == 0) { + mbs_grab(); + dma_w32(chan_no, cs); + dma_w32_mask(0, DMA_CCTRL_ON_OFF, cctrl); + mbs_release(); + } + + ch->xfer_cnt++; + ch->curr_desc++; + if (ch->curr_desc == ch->desc_len) + ch->curr_desc = 0; + + local_irq_restore(flag); + return len; +} +EXPORT_SYMBOL(dma_device_write); + +/** + * Display descriptor list via proc file + * + * \param chan_no - logical channel number + * \ingroup Internal + */ +int desc_list_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len = 0; + int i; + static int chan_no; + u32 *p; + + if ((chan_no == 0) && (offset > count)) { + *eof = 1; + return 0; + } + + if (chan_no != 0) { + *start = buf; + } else { + buf = buf + offset; + *start = buf; + } + + p = (u32 *)dma_chan[chan_no].desc_base; + + if (dma_chan[chan_no].dir == DIR_RX) + len += sprintf(buf + len, + "channel %d %s Rx descriptor list:\n", + chan_no, dma_chan[chan_no].dma_dev->device_name); + else + len += sprintf(buf + len, + "channel %d %s Tx descriptor list:\n", + chan_no, dma_chan[chan_no].dma_dev->device_name); + len += sprintf(buf + len, + " no address data pointer command bits " + "(Own, Complete, SoP, EoP, Offset) \n"); + len += sprintf(buf + len, + "----------------------------------------------" + "-----------------------------------\n"); + for (i = 0; i < dma_chan[chan_no].desc_len; i++) { + len += sprintf(buf + len, "%3d ", i); + len += sprintf(buf + len, "0x%08x ", (u32)(p + (i * 2))); + len += sprintf(buf + len, "%08x ", *(p + (i * 2 + 1))); + len += sprintf(buf + len, "%08x ", *(p + (i * 2))); + + if (*(p + (i * 2)) & 0x80000000) + len += sprintf(buf + len, "D "); + else + len += sprintf(buf + len, "C "); + if (*(p + (i * 2)) & 0x40000000) + len += sprintf(buf + len, "C "); + else + len += sprintf(buf + len, "c "); + if (*(p + (i * 2)) & 0x20000000) + len += sprintf(buf + len, "S "); + else + len += sprintf(buf + len, "s "); + if (*(p + (i * 2)) & 0x10000000) + len += sprintf(buf + len, "E "); + else + len += sprintf(buf + len, "e "); + + /* byte offset is different for rx and tx descriptors*/ + if (dma_chan[chan_no].dir == DIR_RX) { + len += sprintf(buf + len, "%01x ", + (*(p + (i * 2)) & 0x01800000) >> 23); + } else { + len += sprintf(buf + len, "%02x ", + (*(p + (i * 2)) & 0x0F800000) >> 23); + } + + if (dma_chan[chan_no].curr_desc == i) + len += sprintf(buf + len, "<- CURR"); + + if (dma_chan[chan_no].prev_desc == i) + len += sprintf(buf + len, "<- PREV"); + + len += sprintf(buf + len, "\n"); + + } + + len += sprintf(buf + len, "\n"); + chan_no++; + if (chan_no > LTQ_MAX_DMA_CHANNEL_NUM - 1) + chan_no = 0; + + *eof = 1; + return len; +} + +/** + * Displays the weight of all DMA channels via proc file + * + * + * + * \param *buf + * \param **start + * \param offset + * \param count + * \param *eof + * \param *data + * \return len - amount of bytes written to file + */ +int channel_weight_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int i; + int len = 0; + len += sprintf(buf + len, "Qos dma channel weight list\n"); + len += sprintf(buf + len, "channel_num default_weight " + "current_weight device Tx/Rx\n"); + len += sprintf(buf + len, "---------------------------" + "---------------------------------\n"); + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + struct dma_channel_info *ch = &dma_chan[i]; + + if (ch->dir == DIR_RX) { + len += sprintf(buf + len, + " %2d %08x " + "%08x %10s Rx\n", + i, ch->default_weight, ch->weight, + ch->dma_dev->device_name); + } else { + len += sprintf(buf + len, + " %2d %08x " + "%08x %10s Tx\n", + i, ch->default_weight, ch->weight, + ch->dma_dev->device_name); + } + } + + return len; +} + +/** + * Provides DMA Register Content to proc file + * This function reads the content of general DMA Registers, DMA Channel + * Registers and DMA Port Registers and performs a structures output to the + * DMA proc file + * + * \param *buf + * \param **start + * \param offset + * \param count + * \param *eof + * \param *data + * \return len - amount of bytes written to file + */ +int dma_register_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len = 0; + int i; + int limit = count; + unsigned long flags; + static int blockcount; + static int channel_no; + + if ((blockcount == 0) && (offset > count)) { + *eof = 1; + return 0; + } + + switch (blockcount) { + case 0: + len += sprintf(buf + len, "\nGeneral DMA Registers\n"); + len += sprintf(buf + len, "-------------------------" + "----------------\n"); + len += sprintf(buf + len, "CLC= %08x\n", dma_r32(clc)); + len += sprintf(buf + len, "ID= %08x\n", dma_r32(id)); + len += sprintf(buf + len, "DMA_CPOLL= %08x\n", dma_r32(cpoll)); + len += sprintf(buf + len, "DMA_CS= %08x\n", dma_r32(cs)); + len += sprintf(buf + len, "DMA_PS= %08x\n", dma_r32(ps)); + len += sprintf(buf + len, "DMA_IRNEN= %08x\n", dma_r32(irnen)); + len += sprintf(buf + len, "DMA_IRNCR= %08x\n", dma_r32(irncr)); + len += sprintf(buf + len, "DMA_IRNICR= %08x\n", + dma_r32(irnicr)); + len += sprintf(buf + len, "\nDMA Channel Registers\n"); + blockcount = 1; + return len; + break; + case 1: + /* If we had an overflow start at beginning of buffer + * otherwise use offset */ + if (channel_no != 0) { + *start = buf; + } else { + buf = buf + offset; + *start = buf; + } + + local_irq_save(flags); + for (i = channel_no; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + struct dma_channel_info *ch = &dma_chan[i]; + + if (len + 300 > limit) { + local_irq_restore(flags); + channel_no = i; + blockcount = 1; + return len; + } + len += sprintf(buf + len, "----------------------" + "-------------------\n"); + if (ch->dir == DIR_RX) { + len += sprintf(buf + len, + "Channel %d - Device %s Rx\n", + i, ch->dma_dev->device_name); + } else { + len += sprintf(buf + len, + "Channel %d - Device %s Tx\n", + i, ch->dma_dev->device_name); + } + dma_w32(i, cs); + len += sprintf(buf + len, "DMA_CCTRL= %08x\n", + dma_r32(cctrl)); + len += sprintf(buf + len, "DMA_CDBA= %08x\n", + dma_r32(cdba)); + len += sprintf(buf + len, "DMA_CIE= %08x\n", + dma_r32(cie)); + len += sprintf(buf + len, "DMA_CIS= %08x\n", + dma_r32(cis)); + len += sprintf(buf + len, "DMA_CDLEN= %08x\n", + dma_r32(cdlen)); + } + local_irq_restore(flags); + blockcount = 2; + channel_no = 0; + return len; + break; + case 2: + *start = buf; + /* + * display port dependent registers + */ + len += sprintf(buf + len, "\nDMA Port Registers\n"); + len += sprintf(buf + len, + "-----------------------------------------\n"); + local_irq_save(flags); + for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) { + dma_w32(i, ps); + len += sprintf(buf + len, + "Port %d DMA_PCTRL= %08x\n", + i, dma_r32(pctrl)); + } + local_irq_restore(flags); + blockcount = 0; + *eof = 1; + return len; + break; + } + + blockcount = 0; + *eof = 1; + return 0; +} + +/** + * Open Method of DMA Device Driver + * This function increments the device driver's use counter. + * + * + * \param + * \return + */ +static int dma_open(struct inode *inode, struct file *file) +{ + return 0; +} + +/** + * Release Method of DMA Device driver. + * This function decrements the device driver's use counter. + * + * + * \param + * \return + */ +static int dma_release(struct inode *inode, struct file *file) +{ + /* release the resources */ + return 0; +} + +/** + * Ioctl Interface to DMA Module + * + * \param None + * \return 0 - initialization successful + * <0 - failed initialization + */ +static long dma_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + int result = 0; + /* TODO: add some user controled functions here */ + return result; +} + +const static struct file_operations dma_fops = { + .owner = THIS_MODULE, + .open = dma_open, + .release = dma_release, + .unlocked_ioctl = dma_ioctl, +}; + +void map_dma_chan(struct dma_channel_info *map) +{ + int i; + + /* assign default values for channel settings */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + dma_chan[i].byte_offset = 0; + dma_chan[i].open = &open_chan; + dma_chan[i].close = &close_chan; + dma_chan[i].reset = &reset_chan; + dma_chan[i].enable_irq = enable_ch_irq; + dma_chan[i].disable_irq = disable_ch_irq; + dma_chan[i].tx_weight = 1; + dma_chan[i].control = 0; + dma_chan[i].default_weight = LTQ_DMA_CH_DEFAULT_WEIGHT; + dma_chan[i].weight = dma_chan[i].default_weight; + dma_chan[i].curr_desc = 0; + dma_chan[i].prev_desc = 0; + } + + /* assign default values for port settings */ + for (i = 0; i < LTQ_MAX_DMA_DEVICE_NUM; i++) { + /*set default tx channel number to be one*/ + dma_devices[i].num_tx_chan = 1; + /*set default rx channel number to be one*/ + dma_devices[i].num_rx_chan = 1; + dma_devices[i].buffer_alloc = common_buffer_alloc; + dma_devices[i].buffer_free = common_buffer_free; + dma_devices[i].intr_handler = NULL; + dma_devices[i].tx_burst_len = 4; + dma_devices[i].rx_burst_len = 4; +#ifdef CONFIG_CPU_LITTLE_ENDIAN + dma_devices[i].tx_endianness_mode = 0; + dma_devices[i].rx_endianness_mode = 0; +#else + dma_devices[i].tx_endianness_mode = 3; + dma_devices[i].rx_endianness_mode = 3; +#endif + } +} + +void dma_chip_init(void) +{ + int i; + + sys1_w32(SYS1_CLKENR_DMA, clkenr); + wmb(); + /* reset DMA */ + dma_w32(DMA_CTRL_RST, ctrl); + wmb(); + /* disable all the interrupts first */ + dma_w32(0, irnen); + + /* enable polling for all channels */ + dma_w32(DMA_CPOLL_EN | DMA_CPOLL_CNT_VAL(DMA_POLL_COUNTER), cpoll); + + /****************************************************/ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) + disable_ch_irq(&dma_chan[i]); +} + +int ltq_dma_init(void) +{ + int result = 0; + int i; + unsigned long flag; + static int dma_initialized; + + if (dma_initialized == 1) + return 0; + dma_initialized = 1; + + result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops); + if (result) { + DMA_EMSG("cannot register device dma-core!\n"); + return result; + } + + dma_chip_init(); + map_dma_chan(dma_chan); + + /* allocate DMA memory for buffer descriptors */ + for (i = 0; i < DMA_DESCR_MEM_PAGES; i++) { + g_desc_list[i] = (u64 *)__get_free_page(GFP_DMA); + if (g_desc_list[i] == NULL) { + DMA_EMSG("no memory for desriptor\n"); + return -ENOMEM; + } + g_desc_list[i] = (u64 *)KSEG1ADDR(g_desc_list[i]); + memset(g_desc_list[i], 0, PAGE_SIZE); + } + + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) { + int page_index, ch_per_page; + /* cross-link relative channels of a port to + * corresponding absolute channels */ + if (dma_chan[i].dir == DIR_RX) { + ((struct dma_device_info *)(dma_chan[i].dma_dev))-> + rx_chan[dma_chan[i].rel_chan_no] = &dma_chan[i]; + } else { + ((struct dma_device_info *)(dma_chan[i].dma_dev))-> + tx_chan[dma_chan[i].rel_chan_no] = &dma_chan[i]; + } + dma_chan[i].abs_chan_no = i; + + page_index = i * DMA_DESCR_CH_SIZE / PAGE_SIZE; + ch_per_page = PAGE_SIZE / DMA_DESCR_CH_SIZE + + ((PAGE_SIZE % DMA_DESCR_CH_SIZE) > 0); + dma_chan[i].desc_base = + (u32)g_desc_list[page_index] + + (i - page_index*ch_per_page) * DMA_DESCR_NUM*8; + dma_chan[i].curr_desc = 0; + dma_chan[i].desc_len = DMA_DESCR_NUM; + + local_irq_save(flag); + mbs_grab(); + dma_w32(i, cs); + dma_w32((u32)CPHYSADDR(dma_chan[i].desc_base), cdba); + mbs_release(); + local_irq_restore(flag); + } + + g_dma_dir = proc_mkdir("driver/" DRV_NAME, NULL); + + create_proc_read_entry("dma_register", + 0, + g_dma_dir, + dma_register_proc_read, + NULL); + + create_proc_read_entry("g_desc_list", + 0, + g_dma_dir, + desc_list_proc_read, + NULL); + + create_proc_read_entry("channel_weight", + 0, + g_dma_dir, + channel_weight_proc_read, + NULL); + + printk(KERN_NOTICE "SVIP DMA engine initialized\n"); + + return 0; +} + +/** + * Cleanup DMA device + * This function releases all resources used by the DMA device driver on + * module removal. + * + * + * \param None + * \return Nothing + */ +void dma_cleanup(void) +{ + int i; + unregister_chrdev(DMA_MAJOR, "dma-core"); + + for (i = 0; i < DMA_DESCR_MEM_PAGES; i++) + free_page(KSEG0ADDR((unsigned long)g_desc_list[i])); + remove_proc_entry("channel_weight", g_dma_dir); + remove_proc_entry("g_desc_list", g_dma_dir); + remove_proc_entry("dma_register", g_dma_dir); + remove_proc_entry("driver/" DRV_NAME, NULL); + /* release the resources */ + for (i = 0; i < LTQ_MAX_DMA_CHANNEL_NUM; i++) + free_irq(dma_chan[i].irq, (void *)&dma_chan[i]); +} + +arch_initcall(ltq_dma_init); + +MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/gpio.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/gpio.c new file mode 100644 index 0000000000..398339201e --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/gpio.c @@ -0,0 +1,553 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/kobject.h> +#include <linux/workqueue.h> +#include <linux/skbuff.h> +#include <linux/netlink.h> +#include <linux/platform_device.h> +#include <net/sock.h> +#include <linux/uaccess.h> +#include <linux/version.h> +#include <linux/semaphore.h> + +#include <lantiq_soc.h> +#include <svip_mux.h> +#include <base_reg.h> +#include <port_reg.h> + +#define DRV_NAME "ifxmips_gpio" + +int gpio_to_irq(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(gpio_to_irq); + +int irq_to_gpio(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(irq_to_gpio); + +struct ltq_port_base { + struct svip_reg_port *base; + u32 pins; +}; + +/* Base addresses for ports */ +static const struct ltq_port_base ltq_port_base[] = { + { (struct svip_reg_port *)LTQ_PORT_P0_BASE, 20 }, + { (struct svip_reg_port *)LTQ_PORT_P1_BASE, 20 }, + { (struct svip_reg_port *)LTQ_PORT_P2_BASE, 19 }, + { (struct svip_reg_port *)LTQ_PORT_P3_BASE, 20 }, + { (struct svip_reg_port *)LTQ_PORT_P4_BASE, 24 } +}; + +#define MAX_PORTS ARRAY_SIZE(ltq_port_base) +#define PINS_PER_PORT(port) (ltq_port_base[port].pins) + +static inline +void ltq_port_set_exintcr0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr0) | (1 << pin), + ltq_port_base[port].base->exintcr0); +} + +static inline +void ltq_port_clear_exintcr0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr0) & ~(1 << pin), + ltq_port_base[port].base->exintcr0); +} + +static inline +void ltq_port_set_exintcr1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr1) | (1 << pin), + ltq_port_base[port].base->exintcr1); +} + +static inline +void ltq_port_clear_exintcr1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->exintcr1) & ~(1 << pin), + ltq_port_base[port].base->exintcr1); +} + +static inline +void ltq_port_set_irncfg(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->irncfg) | (1 << pin), + ltq_port_base[port].base->irncfg); +} + +static inline +void ltq_port_clear_irncfg(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->irncfg) & ~(1 << pin), + ltq_port_base[port].base->irncfg); +} + +static inline +void ltq_port_set_irnen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(1 << pin, ltq_port_base[port].base->irnenset); +} + +static inline +void ltq_port_clear_irnen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(1 << pin, ltq_port_base[port].base->irnenclr); +} + +static inline +void ltq_port_set_dir_out(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->dir) | (1 << pin), + ltq_port_base[port].base->dir); +} + +static inline +void ltq_port_set_dir_in(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->dir) & ~(1 << pin), + ltq_port_base[port].base->dir); +} + +static inline +void ltq_port_set_output(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->out) | (1 << pin), + ltq_port_base[port].base->out); +} + +static inline +void ltq_port_clear_output(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->out) & ~(1 << pin), + ltq_port_base[port].base->out); +} + +static inline +int ltq_port_get_input(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->in) & (1 << pin)) == 0; +} + +static inline +void ltq_port_set_puen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->puen) | (1 << pin), + ltq_port_base[port].base->puen); +} + +static inline +void ltq_port_clear_puen(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->puen) & ~(1 << pin), + ltq_port_base[port].base->puen); +} + +static inline +void ltq_port_set_altsel0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel0) | (1 << pin), + ltq_port_base[port].base->altsel0); +} + +static inline +void ltq_port_clear_altsel0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel0) & ~(1 << pin), + ltq_port_base[port].base->altsel0); +} + +static inline +void ltq_port_set_altsel1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel1) | (1 << pin), + ltq_port_base[port].base->altsel1); +} + +static inline +void ltq_port_clear_altsel1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return; + + port_w32(port_r32(ltq_port_base[port].base->altsel1) & ~(1 << pin), + ltq_port_base[port].base->altsel1); +} + +void ltq_gpio_configure(int port, int pin, bool dirin, bool puen, + bool altsel0, bool altsel1) +{ + if (dirin) + ltq_port_set_dir_in(port, pin); + else + ltq_port_set_dir_out(port, pin); + + if (puen) + ltq_port_set_puen(port, pin); + else + ltq_port_clear_puen(port, pin); + + if (altsel0) + ltq_port_set_altsel0(port, pin); + else + ltq_port_clear_altsel0(port, pin); + + if (altsel1) + ltq_port_set_altsel1(port, pin); + else + ltq_port_clear_altsel1(port, pin); +} + +int ltq_port_get_dir(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->dir) & (1 << pin)) != 0; +} + +int ltq_port_get_puden(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->puen) & (1 << pin)) != 0; +} + +int ltq_port_get_altsel0(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->altsel0) & (1 << pin)) != 0; +} + +int ltq_port_get_altsel1(unsigned int port, unsigned int pin) +{ + if (port >= MAX_PORTS || pin >= PINS_PER_PORT(port)) + return -EINVAL; + + return (port_r32(ltq_port_base[port].base->altsel1) & (1 << pin)) != 0; +} + +struct ltq_gpio_port { + struct gpio_chip gpio_chip; + unsigned int irq_base; + unsigned int chained_irq; +}; + +static struct ltq_gpio_port ltq_gpio_port[MAX_PORTS]; + +static int gpio_exported; +static int __init gpio_export_setup(char *str) +{ + get_option(&str, &gpio_exported); + return 1; +} +__setup("gpio_exported=", gpio_export_setup); + +static inline unsigned int offset2port(unsigned int offset) +{ + unsigned int i; + unsigned int prev = 0; + + for (i = 0; i < ARRAY_SIZE(ltq_port_base); i++) { + if (offset >= prev && + offset < prev + ltq_port_base[i].pins) + return i; + + prev = ltq_port_base[i].pins; + } + + return 0; +} + +static inline unsigned int offset2pin(unsigned int offset) +{ + unsigned int i; + unsigned int prev = 0; + + for (i = 0; i < ARRAY_SIZE(ltq_port_base); i++) { + if (offset >= prev && + offset < prev + ltq_port_base[i].pins) + return offset - prev; + + prev = ltq_port_base[i].pins; + } + + return 0; +} + +static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + ltq_port_set_dir_in(offset2port(offset), offset2pin(offset)); + return 0; +} + +static int ltq_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + ltq_port_set_dir_out(offset2port(offset), offset2pin(offset)); + return 0; +} + +static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return ltq_port_get_input(offset2port(offset), offset2pin(offset)); +} + +static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + if (value) + ltq_port_set_output(offset2port(offset), offset2pin(offset)); + else + ltq_port_clear_output(offset2port(offset), offset2pin(offset)); +} + +static int svip_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return 0; +} + +static void ltq_gpio_free(struct gpio_chip *chip, unsigned offset) +{ +} + +static int ltq_gpio_probe(struct platform_device *pdev) +{ + int ret = 0; + struct ltq_gpio_port *gpio_port; + + if (pdev->id >= MAX_PORTS) + return -ENODEV; + + gpio_port = <q_gpio_port[pdev->id]; + gpio_port->gpio_chip.label = "ltq-gpio"; + + gpio_port->gpio_chip.direction_input = ltq_gpio_direction_input; + gpio_port->gpio_chip.direction_output = ltq_gpio_direction_output; + gpio_port->gpio_chip.get = ltq_gpio_get; + gpio_port->gpio_chip.set = ltq_gpio_set; + gpio_port->gpio_chip.request = svip_gpio_request; + gpio_port->gpio_chip.free = ltq_gpio_free; + gpio_port->gpio_chip.base = 100 * pdev->id; + gpio_port->gpio_chip.ngpio = 32; + gpio_port->gpio_chip.dev = &pdev->dev; + gpio_port->gpio_chip.exported = gpio_exported; + + ret = gpiochip_add(&gpio_port->gpio_chip); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d, %d\n", + pdev->id, ret); + goto err; + } + platform_set_drvdata(pdev, gpio_port); + + return 0; + +err: + return ret; +} + +static int ltq_gpio_remove(struct platform_device *pdev) +{ + struct ltq_gpio_port *gpio_port = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&gpio_port->gpio_chip); + + return ret; +} + +static struct platform_driver ltq_gpio_driver = { + .probe = ltq_gpio_probe, + .remove = __devexit_p(ltq_gpio_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +int __init ltq_gpio_init(void) +{ + int ret = platform_driver_register(<q_gpio_driver); + if (ret) + printk(KERN_INFO DRV_NAME + ": Error registering platform driver!"); + return ret; +} + +postcore_initcall(ltq_gpio_init); + +/** + * Convert interrupt number to corresponding port/pin pair + * Returns the port/pin pair serving the selected external interrupt; + * needed since mapping not linear. + * + * \param exint External interrupt number + * \param port Pointer for resulting port + * \param pin Pointer for resutling pin + * \return -EINVAL Invalid exint + * \return 0 port/pin updated + * \ingroup API + */ +static int ltq_exint2port(u32 exint, int *port, int *pin) +{ + if ((exint >= 0) && (exint <= 10)) { + *port = 0; + *pin = exint + 7; + } else if ((exint >= 11) && (exint <= 14)) { + *port = 1; + *pin = 18 - (exint - 11) ; + } else if (exint == 15) { + *port = 1; + *pin = 19; + } else if (exint == 16) { + *port = 0; + *pin = 19; + } else { + return -EINVAL; + } + return 0; +} + +/** + * Enable external interrupt. + * This function enables an external interrupt and sets the given mode. + * valid values for mode are: + * - 0 = Interrupt generation disabled + * - 1 = Interrupt on rising edge + * - 2 = Interrupt on falling edge + * - 3 = Interrupt on rising and falling edge + * - 5 = Interrupt on high level detection + * - 6 = Interrupt on low level detection + * + * \param exint - Number of external interrupt + * \param mode - Trigger mode + * \return 0 on success + * \ingroup API + */ +int ifx_enable_external_int(u32 exint, u32 mode) +{ + int port; + int pin; + + if ((mode < 0) || (mode > 6)) + return -EINVAL; + + if (ltq_exint2port(exint, &port, &pin)) + return -EINVAL; + + ltq_port_clear_exintcr0(port, pin); + ltq_port_clear_exintcr1(port, pin); + ltq_port_clear_irncfg(port, pin); + + if (mode & 0x1) + ltq_port_set_exintcr0(port, pin); + if (mode & 0x2) + ltq_port_set_exintcr1(port, pin); + if (mode & 0x4) + ltq_port_set_irncfg(port, pin); + + ltq_port_set_irnen(port, pin); + return 0; +} +EXPORT_SYMBOL(ifx_enable_external_int); + +/** + * Disable external interrupt. + * This function disables an external interrupt and sets mode to 0x00. + * + * \param exint - Number of external interrupt + * \return 0 on success + * \ingroup API + */ +int ifx_disable_external_int(u32 exint) +{ + int port; + int pin; + + if (ltq_exint2port(exint, &port, &pin)) + return -EINVAL; + + ltq_port_clear_irnen(port, pin); + return 0; +} +EXPORT_SYMBOL(ifx_disable_external_int); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mach-easy33016.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mach-easy33016.c new file mode 100644 index 0000000000..c5993efd6d --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mach-easy33016.c @@ -0,0 +1,73 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include "../machtypes.h" + +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <svip_pms.h> + +#include "devices.h" + +static const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS] = { + LTQ_MUX_P0_0_SSC0_MTSR, + LTQ_MUX_P0_1_SSC0_MRST, + LTQ_MUX_P0_2_SSC0_SCLK, + LTQ_MUX_P0_3_SSC1_MTSR, + LTQ_MUX_P0_4_SSC1_MRST, + LTQ_MUX_P0_5_SSC1_SCLK, + LTQ_MUX_P0_6_SSC0_CS0, + LTQ_MUX_P0_7_SSC0_CS1, + LTQ_MUX_P0_8_SSC0_CS2, + LTQ_MUX_P0_9, + LTQ_MUX_P0_10, + LTQ_MUX_P0_11_EXINT4, + LTQ_MUX_P0_12, + LTQ_MUX_P0_13, + LTQ_MUX_P0_14_ASC0_TXD, + LTQ_MUX_P0_15_ASC0_RXD, + LTQ_MUX_P0_16_EXINT9, + LTQ_MUX_P0_17_EXINT10, + LTQ_MUX_P0_18_EJ_BRKIN, + LTQ_MUX_P0_19_EXINT16 +}; + +static void __init easy33016_init(void) +{ + svip_sys1_clk_enable(SYS1_CLKENR_L2C | + SYS1_CLKENR_DDR2 | + SYS1_CLKENR_SMI2 | + SYS1_CLKENR_SMI1 | + SYS1_CLKENR_SMI0 | + SYS1_CLKENR_FMI0 | + SYS1_CLKENR_DMA | + SYS1_CLKENR_SSC0 | + SYS1_CLKENR_SSC1 | + SYS1_CLKENR_EBU); + + svip_sys2_clk_enable(SYS2_CLKENR_HWSYNC | + SYS2_CLKENR_MBS | + SYS2_CLKENR_SWINT); + + svip_register_mux(mux_p0, NULL, NULL, NULL, NULL); + svip_register_asc(0); + svip_register_eth(); + svip_register_virtual_eth(); + ltq_register_wdt(); + svip_register_gpio(); + svip_register_spi(); + svip_register_nand(); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY33016, + "EASY33016", + "EASY33016", + easy33016_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mach-easy336.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mach-easy336.c new file mode 100644 index 0000000000..460bb7d85d --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mach-easy336.c @@ -0,0 +1,221 @@ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include "../machtypes.h" + +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <svip_pms.h> + +#include "devices.h" + +static struct mtd_partition easy336_sflash_partitions[] = { + { + .name = "SPI flash", + .size = MTDPART_SIZ_FULL, + .offset = 0, + }, +}; + +static struct flash_platform_data easy336_sflash_data = { + .name = "m25p32", + .parts = (void *)&easy336_sflash_partitions, + .nr_parts = ARRAY_SIZE(easy336_sflash_partitions), + .type = "m25p32", +}; + +static struct spi_board_info bdinfo[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &easy336_sflash_data, + .mode = SPI_MODE_0, + .irq = -1, + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 0, + } +}; + +static struct mtd_partition easy336_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot_env", + .offset = 0x40000, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x60000, + .size = 0x1a0000, + }, + { + .name = "rootfs", + .offset = 0x200000, + .size = 0x500000, + }, +}; + +static struct physmap_flash_data easy336_flash_data = { + .nr_parts = ARRAY_SIZE(easy336_partitions), + .parts = easy336_partitions, +}; + +static const struct ltq_mux_pin mux_p0[LTQ_MUX_P0_PINS] = { + LTQ_MUX_P0_0_SSC0_MTSR, + LTQ_MUX_P0_1_SSC0_MRST, + LTQ_MUX_P0_2_SSC0_SCLK, + LTQ_MUX_P0_3_SSC1_MTSR, + LTQ_MUX_P0_4_SSC1_MRST, + LTQ_MUX_P0_5_SSC1_SCLK, + LTQ_MUX_P0_6_SSC0_CS0, + LTQ_MUX_P0_7_SSC0_CS1, + LTQ_MUX_P0_8_SSC0_CS2, + LTQ_MUX_P0_9_SSC0_CS3, + LTQ_MUX_P0_10_SSC0_CS4, + LTQ_MUX_P0_11_SSC0_CS5, + LTQ_MUX_P0_12_EXINT5, + LTQ_MUX_P0_13_EXINT6, + LTQ_MUX_P0_14_ASC0_TXD, + LTQ_MUX_P0_15_ASC0_RXD, + LTQ_MUX_P0_16_EXINT9, + LTQ_MUX_P0_17_EXINT10, + LTQ_MUX_P0_18_EJ_BRKIN, + LTQ_MUX_P0_19_EXINT16 +}; + +static const struct ltq_mux_pin mux_p2[LTQ_MUX_P2_PINS] = { + LTQ_MUX_P2_0_EBU_A0, + LTQ_MUX_P2_1_EBU_A1, + LTQ_MUX_P2_2_EBU_A2, + LTQ_MUX_P2_3_EBU_A3, + LTQ_MUX_P2_4_EBU_A4, + LTQ_MUX_P2_5_EBU_A5, + LTQ_MUX_P2_6_EBU_A6, + LTQ_MUX_P2_7_EBU_A7, + LTQ_MUX_P2_8_EBU_A8, + LTQ_MUX_P2_9_EBU_A9, + LTQ_MUX_P2_10_EBU_A10, + LTQ_MUX_P2_11_EBU_A11, + LTQ_MUX_P2_12_EBU_RD, + LTQ_MUX_P2_13_EBU_WR, + LTQ_MUX_P2_14_EBU_ALE, + LTQ_MUX_P2_15_EBU_WAIT, + LTQ_MUX_P2_16_EBU_RDBY, + LTQ_MUX_P2_17_EBU_BC0, + LTQ_MUX_P2_18_EBU_BC1 +}; + +static const struct ltq_mux_pin mux_p3[LTQ_MUX_P3_PINS] = { + LTQ_MUX_P3_0_EBU_AD0, + LTQ_MUX_P3_1_EBU_AD1, + LTQ_MUX_P3_2_EBU_AD2, + LTQ_MUX_P3_3_EBU_AD3, + LTQ_MUX_P3_4_EBU_AD4, + LTQ_MUX_P3_5_EBU_AD5, + LTQ_MUX_P3_6_EBU_AD6, + LTQ_MUX_P3_7_EBU_AD7, + LTQ_MUX_P3_8_EBU_AD8, + LTQ_MUX_P3_9_EBU_AD9, + LTQ_MUX_P3_10_EBU_AD10, + LTQ_MUX_P3_11_EBU_AD11, + LTQ_MUX_P3_12_EBU_AD12, + LTQ_MUX_P3_13_EBU_AD13, + LTQ_MUX_P3_14_EBU_AD14, + LTQ_MUX_P3_15_EBU_AD15, + LTQ_MUX_P3_16_EBU_CS0, + LTQ_MUX_P3_17_EBU_CS1, + LTQ_MUX_P3_18_EBU_CS2, + LTQ_MUX_P3_19_EBU_CS3 +}; + +static void __init easy336_init_common(void) +{ + svip_sys1_clk_enable(SYS1_CLKENR_L2C | + SYS1_CLKENR_DDR2 | + SYS1_CLKENR_SMI2 | + SYS1_CLKENR_SMI1 | + SYS1_CLKENR_SMI0 | + SYS1_CLKENR_FMI0 | + SYS1_CLKENR_DMA | + SYS1_CLKENR_GPTC | + SYS1_CLKENR_EBU); + + svip_sys2_clk_enable(SYS2_CLKENR_HWSYNC | + SYS2_CLKENR_MBS | + SYS2_CLKENR_SWINT | + SYS2_CLKENR_HWACC3 | + SYS2_CLKENR_HWACC2 | + SYS2_CLKENR_HWACC1 | + SYS2_CLKENR_HWACC0 | + SYS2_CLKENR_SIF7 | + SYS2_CLKENR_SIF6 | + SYS2_CLKENR_SIF5 | + SYS2_CLKENR_SIF4 | + SYS2_CLKENR_SIF3 | + SYS2_CLKENR_SIF2 | + SYS2_CLKENR_SIF1 | + SYS2_CLKENR_SIF0 | + SYS2_CLKENR_DFEV7 | + SYS2_CLKENR_DFEV6 | + SYS2_CLKENR_DFEV5 | + SYS2_CLKENR_DFEV4 | + SYS2_CLKENR_DFEV3 | + SYS2_CLKENR_DFEV2 | + SYS2_CLKENR_DFEV1 | + SYS2_CLKENR_DFEV0); + + svip_register_mux(mux_p0, NULL, mux_p2, mux_p3, NULL); + svip_register_asc(0); + svip_register_eth(); + svip_register_virtual_eth(); + /* ltq_register_wdt(); - conflicts with lq_switch */ + svip_register_gpio(); + svip_register_spi(); + ltq_register_tapi(); +} + +static void __init easy336_init(void) +{ + easy336_init_common(); + ltq_register_nor(&easy336_flash_data); +} + +static void __init easy336sf_init(void) +{ + easy336_init_common(); + svip_register_spi_flash(bdinfo); +} + +static void __init easy336nand_init(void) +{ + easy336_init_common(); + svip_register_nand(); +} + +MIPS_MACHINE(LANTIQ_MACH_EASY336, + "EASY336", + "EASY336", + easy336_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY336SF, + "EASY336SF", + "EASY336 (Serial Flash)", + easy336sf_init); + +MIPS_MACHINE(LANTIQ_MACH_EASY336NAND, + "EASY336NAND", + "EASY336 (NAND Flash)", + easy336nand_init); + diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mux.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mux.c new file mode 100644 index 0000000000..56805e55bb --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/mux.c @@ -0,0 +1,187 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <asm/addrspace.h> +#include <linux/platform_device.h> + +#include <lantiq_soc.h> +#include <svip_mux.h> +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <svip_pms.h> + +#define DRV_NAME "ltq_mux" + +static void ltq_mux_port_init(const int port, + const struct ltq_mux_pin *pins, + const int pin_max) +{ + unsigned int i; + + for (i = 0; i < pin_max; i++) + ltq_gpio_configure(port, + i, + pins[i].dirin, + pins[i].puen, + pins[i].altsel0, + pins[i].altsel1); +} + +static int ltq_mux_probe(struct platform_device *pdev) +{ + struct ltq_mux_settings *mux_settings = dev_get_platdata(&pdev->dev); + + if (mux_settings->mux_p0) + ltq_mux_port_init(0, + mux_settings->mux_p0, + LTQ_MUX_P0_PINS); + + if (mux_settings->mux_p1) + ltq_mux_port_init(1, + mux_settings->mux_p1, + LTQ_MUX_P1_PINS); + + if (mux_settings->mux_p2) + ltq_mux_port_init(2, + mux_settings->mux_p2, + LTQ_MUX_P2_PINS); + + if (mux_settings->mux_p3) + ltq_mux_port_init(3, + mux_settings->mux_p3, + LTQ_MUX_P3_PINS); + + if (mux_settings->mux_p4) + ltq_mux_port_init(4, + mux_settings->mux_p4, + LTQ_MUX_P4_PINS); + + return 0; +} + +int ltq_mux_read_procmem(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len = 0; + int t = 0, i = 0; + u32 port_clk[5] = { + SYS1_CLKENR_PORT0, + SYS1_CLKENR_PORT1, + SYS1_CLKENR_PORT2, + SYS1_CLKENR_PORT3, + SYS2_CLKENR_PORT4, + }; + +#define PROC_PRINT(fmt, args...) \ + do { \ + int c_len = 0; \ + c_len = snprintf(buf + len, count - len, fmt, ## args); \ + if (c_len <= 0) \ + goto out; \ + if (c_len >= (count - len)) { \ + len += (count - len); \ + goto out; \ + } \ + len += c_len; \ + if (offset > 0) { \ + if (len > offset) { \ + len -= offset; \ + memmove(buf, buf + offset, len); \ + offset = 0; \ + } else { \ + offset -= len; \ + len = 0; \ + } \ + } \ + } while (0) + + PROC_PRINT("\nVINETIC-SVIP Multiplex Settings\n"); + PROC_PRINT(" 3 2 1 0\n"); + PROC_PRINT(" 10987654321098765432109876543210\n"); + PROC_PRINT(" --------------------------------\n"); + + for (i = 0; i < ARRAY_SIZE(port_clk); i++) { + if (i < 4) { + if (!svip_sys1_clk_is_enabled(port_clk[i])) + continue; + } else { + if (!svip_sys2_clk_is_enabled(port_clk[i])) + continue; + } + + PROC_PRINT("P%d.%-10s", i, "DIR:"); + + for (t = 31; t != -1; t--) + PROC_PRINT("%d", ltq_port_get_dir(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n"); + + PROC_PRINT("P%d.%-10s", i, "PUEN:"); + for (t = 31; t != -1; t--) + PROC_PRINT("%d", ltq_port_get_puden(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n"); + + PROC_PRINT("P%d.%-10s", i, "ALTSEL0:"); + for (t = 31; t != -1; t--) + PROC_PRINT("%d", + ltq_port_get_altsel0(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n"); + + PROC_PRINT("P%d.%-10s", i, "ALTSEL1:"); + for (t = 31; t != -1; t--) + PROC_PRINT("%d", + ltq_port_get_altsel1(i, t) == 1 ? 1 : 0); + PROC_PRINT("\n\n"); + } + +out: + if (len < 0) { + len = 0; + *eof = 1; + } else if (len < count) { + *eof = 1; + } else { + len = count; + } + + *start = buf; + + return len; +} + +static struct platform_driver ltq_mux_driver = { + .probe = ltq_mux_probe, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +int __init ltq_mux_init(void) +{ + int ret = platform_driver_register(<q_mux_driver); + if (ret) { + printk(KERN_INFO DRV_NAME + ": Error registering platform driver!"); + return ret; + } + + return create_proc_read_entry("driver/ltq_mux", 0, NULL, + ltq_mux_read_procmem, NULL) == NULL; +} + +module_init(ltq_mux_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/pms.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/pms.c new file mode 100644 index 0000000000..5c0c808a04 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/pms.c @@ -0,0 +1,101 @@ +/************************************************************************ + * + * Copyright (c) 2007 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <asm/addrspace.h> + +#include <base_reg.h> +#include <sys1_reg.h> +#include <sys2_reg.h> +#include <lantiq_soc.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_sys2 *const sys2 = (struct svip_reg_sys2 *)LTQ_SYS2_BASE; + +void svip_sys1_clk_enable(u32 mask) +{ + sys1_w32(sys1_r32(clksr) | mask, clkenr); + asm("sync;"); +} +EXPORT_SYMBOL(svip_sys1_clk_enable); + +int svip_sys1_clk_is_enabled(u32 mask) +{ + return (sys1_r32(clksr) & mask) != 0; +} +EXPORT_SYMBOL(svip_sys1_clk_is_enabled); + +void svip_sys2_clk_enable(u32 mask) +{ + sys2_w32(sys2_r32(clksr) | mask, clkenr); + asm("sync;"); +} +EXPORT_SYMBOL(svip_sys2_clk_enable); + +int svip_sys2_clk_is_enabled(u32 mask) +{ + return (sys2_r32(clksr) & mask) != 0; +} +EXPORT_SYMBOL(svip_sys2_clk_is_enabled); + +int ltq_pms_read_procmem(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + long len = 0; + int t = 0; + u32 bit = 0; + u32 reg_tmp, bits_tmp; + + len = sprintf(buf, "\nSVIP PMS Settings\n"); + len = len + sprintf(buf + len, + " 3 2 1 0\n"); + len = len + sprintf(buf + len, + " 210987654321098765432109876543210\n"); + len = len + sprintf(buf + len, + "---------------------------------------------\n"); + len = len + sprintf(buf + len, + "SYS1_CLKSR: "); + reg_tmp = sys1_r32(clksr); + bit = 0x80000000; + for (t = 31; t != -1; t--) { + bits_tmp = (reg_tmp & bit) >> t; + len = len + sprintf(buf + len, "%d", bits_tmp); + bit = bit >> 1; + } + len = len + sprintf(buf + len, "\n\n"); + len = len + sprintf(buf + len, "SYS2_CLKSR: "); + reg_tmp = sys2_r32(clksr); + bit = 0x80000000; + for (t = 31; t != -1; t--) { + bits_tmp = (reg_tmp & bit) >> t; + len = len + sprintf(buf + len, "%d", bits_tmp); + bit = bit >> 1; + } + len = len + sprintf(buf + len, "\n\n"); + + *eof = 1; + + return len; +} + +int __init ltq_pms_init_proc(void) +{ + return create_proc_read_entry("driver/ltq_pms", 0, NULL, + ltq_pms_read_procmem, NULL) == NULL; +} + +module_init(ltq_pms_init_proc); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/prom.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/prom.c new file mode 100644 index 0000000000..1c17531606 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/prom.c @@ -0,0 +1,73 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/time.h> +#include <asm/bootinfo.h> + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "../clk.h" +#include "../machtypes.h" + +#include <base_reg.h> +#include <ebu_reg.h> + +#define SOC_SVIP "SVIP" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFF000 +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE; + +void __init ltq_soc_init(void) +{ + clkdev_add_static(ltq_svip_cpu_hz(), ltq_svip_fpi_hz(), + ltq_svip_io_region_clock()); +} + +void __init +ltq_soc_setup(void) +{ + if (mips_machtype == LANTIQ_MACH_EASY33016 || + mips_machtype == LANTIQ_MACH_EASY336) { + ebu_w32(0x120000f1, addr_sel_2); + ebu_w32(LTQ_EBU_CON_0_ADSWP | + LTQ_EBU_CON_0_SETUP | + LTQ_EBU_CON_0_BCGEN_VAL(0x02) | + LTQ_EBU_CON_0_WAITWRC_VAL(7) | + LTQ_EBU_CON_0_WAITRDC_VAL(3) | + LTQ_EBU_CON_0_HOLDC_VAL(3) | + LTQ_EBU_CON_0_RECOVC_VAL(3) | + LTQ_EBU_CON_0_CMULT_VAL(3), con_2); + } +} + +void __init +ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_STATUS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_STATUS_CHIPID) & REV_MASK) >> REV_SHIFT; + sprintf(i->rev_type, "1.%d", i->rev); + switch (i->partnum) { + case SOC_ID_SVIP: + i->name = SOC_SVIP; + i->type = SOC_TYPE_SVIP; + break; + + default: + printk(KERN_ERR "unknown partnum : 0x%08X\n", i->partnum); + while (1); + break; + } +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/reset.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/reset.c new file mode 100644 index 0000000000..5551875da6 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/reset.c @@ -0,0 +1,95 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/module.h> +#include <asm/reboot.h> + +#include <lantiq_soc.h> +#include "../machtypes.h" +#include <base_reg.h> +#include <sys1_reg.h> +#include <boot_reg.h> +#include <ebu_reg.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_ebu *const ebu = (struct svip_reg_ebu *)LTQ_EBU_BASE; + +#define CPLD_CMDREG3 ((volatile unsigned char*)(KSEG1 + 0x120000f3)) +extern void switchip_reset(void); + +static void ltq_machine_restart(char *command) +{ + printk(KERN_NOTICE "System restart\n"); + local_irq_disable(); + + if (mips_machtype == LANTIQ_MACH_EASY33016 || + mips_machtype == LANTIQ_MACH_EASY336) { + /* We just use the CPLD function to reset the entire system as a + workaround for the switch reset problem */ + local_irq_disable(); + ebu_w32(0x120000f1, addr_sel_2); + ebu_w32(0x404027ff, con_2); + + if (mips_machtype == LANTIQ_MACH_EASY336) + /* set bit 0 to reset SVIP */ + *CPLD_CMDREG3 = (1<<0); + else + /* set bit 7 to reset SVIP, set bit 3 to reset xT */ + *CPLD_CMDREG3 = (1<<7) | (1<<3); + } else { + *LTQ_BOOT_RVEC(0) = 0; + /* reset all except PER, SUBSYS and CPU0 */ + sys1_w32(0x00043F3E, rreqr); + /* release WDT0 reset */ + sys1_w32(0x00000100, rrlsr); + /* restore reset value for clock enables */ + sys1_w32(~0x0c000040, clkclr); + /* reset SUBSYS (incl. DDR2) and CPU0 */ + sys1_w32(0x00030001, rbtr); + } + + for (;;) + ; +} + +static void ltq_machine_halt(void) +{ + printk(KERN_NOTICE "System halted.\n"); + local_irq_disable(); + for (;;) + ; +} + +static void ltq_machine_power_off(void) +{ + printk(KERN_NOTICE "Please turn off the power now.\n"); + local_irq_disable(); + for (;;) + ; +} + +/* This function is used by the watchdog driver */ +int ltq_reset_cause(void) +{ + return 0; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +static int __init mips_reboot_setup(void) +{ + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/switchip_setup.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/switchip_setup.c new file mode 100644 index 0000000000..5da15327ea --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/svip/switchip_setup.c @@ -0,0 +1,666 @@ +/****************************************************************************** + Copyright (c) 2007, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. + ****************************************************************************** + Module : switchip_setup.c + Date : 2007-11-09 + Description : Basic setup of embedded ethernet switch "SwitchIP" + Remarks: andreas.schmidt@infineon.com + + *****************************************************************************/ + +/* TODO: get rid of #ifdef CONFIG_LANTIQ_MACH_EASY336 */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/time.h> + +#include <base_reg.h> +#include <es_reg.h> +#include <sys1_reg.h> +#include <dma_reg.h> +#include <lantiq_soc.h> + +static struct svip_reg_sys1 *const sys1 = (struct svip_reg_sys1 *)LTQ_SYS1_BASE; +static struct svip_reg_es *const es = (struct svip_reg_es *)LTQ_ES_BASE; + +/* PHY Organizationally Unique Identifier (OUI) */ +#define PHY_OUI_PMC 0x00E004 +#define PHY_OUI_VITESSE 0x008083 +#define PHY_OUI_DEFAULT 0xFFFFFF + +unsigned short switchip_phy_read(unsigned int phyaddr, unsigned int regaddr); +void switchip_phy_write(unsigned int phyaddr, unsigned int regaddr, + unsigned short data); + +static int phy_address[2] = {0, 1}; +static u32 phy_oui; +static void switchip_mdio_poll_init(void); +static void _switchip_mdio_poll(struct work_struct *work); + +/* struct workqueue_struct mdio_poll_task; */ +static struct workqueue_struct *mdio_poll_workqueue; +DECLARE_DELAYED_WORK(mdio_poll_work, _switchip_mdio_poll); +static int old_link_status[2] = {-1, -1}; + +/** + * Autonegotiation check. + * This funtion checks for link changes. If a link change has occured it will + * update certain switch registers. + */ +static void _switchip_check_phy_status(int port) +{ + int new_link_status; + unsigned short reg1; + + reg1 = switchip_phy_read(phy_address[port], 1); + if ((reg1 == 0xFFFF) || (reg1 == 0x0000)) + return; /* no PHY connected */ + + new_link_status = reg1 & 4; + if (old_link_status[port] ^ new_link_status) { + /* link status change */ + if (!new_link_status) { + if (port == 0) + es_w32_mask(LTQ_ES_P0_CTL_REG_FLP, 0, p0_ctl); + else + es_w32_mask(LTQ_ES_P0_CTL_REG_FLP, 0, p1_ctl); + + /* read again; link bit is latched low! */ + reg1 = switchip_phy_read(phy_address[port], 1); + new_link_status = reg1 & 4; + } + + if (new_link_status) { + unsigned short reg0, reg4, reg5, reg9, reg10; + int phy_pause, phy_speed, phy_duplex; + int aneg_enable, aneg_cmpt; + + reg0 = switchip_phy_read(phy_address[port], 0); + reg4 = switchip_phy_read(phy_address[port], 4); + aneg_enable = reg0 & 0x1000; + aneg_cmpt = reg1 & 0x20; + + if (aneg_enable && aneg_cmpt) { + reg5 = switchip_phy_read(phy_address[port], 5); + switch (phy_oui) { +#ifdef CONFIG_LANTIQ_MACH_EASY336 + case PHY_OUI_PMC: + /* PMC Sierra supports 1Gigabit FD, + * only. On successful + * auto-negotiation, we are sure this + * is what the LP can. */ + phy_pause = ((reg4 & reg5) & 0x0080) >> 7; + phy_speed = 2; + phy_duplex = 1; + break; +#endif + case PHY_OUI_VITESSE: + case PHY_OUI_DEFAULT: + reg9 = switchip_phy_read(phy_address[port], 9); + reg10 = switchip_phy_read(phy_address[port], 10); + + /* Check if advertise and partner + * agree on pause */ + phy_pause = ((reg4 & reg5) & 0x0400) >> 10; + + /* Find the best mode both partners + * support + * Priority: 1GB-FD, 1GB-HD, 100MB-FD, + * 100MB-HD, 10MB-FD, 10MB-HD */ + phy_speed = ((((reg9<<2) & reg10) + & 0x0c00) >> 6) | + (((reg4 & reg5) & 0x01e0) >> 5); + + if (phy_speed >= 0x0020) { + phy_speed = 2; + phy_duplex = 1; + } else if (phy_speed >= 0x0010) { + phy_speed = 2; + phy_duplex = 0; + } else if (phy_speed >= 0x0008) { + phy_speed = 1; + phy_duplex = 1; + } else if (phy_speed >= 0x0004) { + phy_speed = 1; + phy_duplex = 0; + } else if (phy_speed >= 0x0002) { + phy_speed = 0; + phy_duplex = 1; + } else { + phy_speed = 0; + phy_duplex = 0; + } + break; + default: + phy_pause = (reg4 & 0x0400) >> 10; + phy_speed = (reg0 & 0x40 ? 2 : (reg0 >> 13)&1); + phy_duplex = (reg0 >> 8)&1; + break; + } + } else { + /* parallel detection or fixed speed */ + phy_pause = (reg4 & 0x0400) >> 10; + phy_speed = (reg0 & 0x40 ? 2 : (reg0 >> 13)&1); + phy_duplex = (reg0 >> 8)&1; + } + + if (port == 0) { + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0SPD, + LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(phy_speed), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0DUP, + LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(phy_duplex), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0FCE, + LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(phy_pause), + rgmii_ctl); + + es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl); + } else { + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1SPD, + LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(phy_speed), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1DUP, + LTQ_ES_RGMII_CTL_REG_P1DUP_VAL(phy_duplex), + rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1FCE, + LTQ_ES_RGMII_CTL_REG_P0FCE_VAL(phy_pause), + rgmii_ctl); + + es_w32_mask(1, LTQ_ES_P0_CTL_REG_FLP, p1_ctl); + } + } + } + old_link_status[port] = new_link_status; +} + +static void _switchip_mdio_poll(struct work_struct *work) +{ + if (es_r32(sw_gctl0) & LTQ_ES_SW_GCTL0_REG_SE) { + _switchip_check_phy_status(0); + _switchip_check_phy_status(1); + } + + queue_delayed_work(mdio_poll_workqueue, &mdio_poll_work, HZ/2); +} + +static void switchip_mdio_poll_init(void) +{ + mdio_poll_workqueue = create_workqueue("SVIP MDIP poll"); + INIT_DELAYED_WORK(&mdio_poll_work, _switchip_mdio_poll); + + queue_delayed_work(mdio_poll_workqueue, &mdio_poll_work, HZ/2); + +} + +unsigned short switchip_phy_read(unsigned int phyaddr, unsigned int regaddr) +{ + /* TODO: protect MDIO access with semaphore */ + es_w32(LTQ_ES_MDIO_CTL_REG_MBUSY + | LTQ_ES_MDIO_CTL_REG_OP_VAL(2) /* read operation */ + | LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(phyaddr) + | LTQ_ES_MDIO_CTL_REG_REGAD_VAL(regaddr), mdio_ctl); + while (es_r32(mdio_ctl) & LTQ_ES_MDIO_CTL_REG_MBUSY); + + return es_r32(mdio_data) & 0xFFFF; +} +EXPORT_SYMBOL(switchip_phy_read); + +void switchip_phy_write(unsigned int phyaddr, unsigned int regaddr, + unsigned short data) +{ + /* TODO: protect MDIO access with semaphore */ + es_w32(LTQ_ES_MDIO_CTL_REG_WD_VAL(data) + | LTQ_ES_MDIO_CTL_REG_MBUSY + | LTQ_ES_MDIO_CTL_REG_OP_VAL(1) /* write operation */ + | LTQ_ES_MDIO_CTL_REG_PHYAD_VAL(phyaddr) + | LTQ_ES_MDIO_CTL_REG_REGAD_VAL(regaddr), mdio_ctl); + while (es_r32(mdio_ctl) & LTQ_ES_MDIO_CTL_REG_MBUSY); + + return; +} +EXPORT_SYMBOL(switchip_phy_write); + +const static u32 switch_reset_offset_000[] = { + /*b8000000:*/ 0xffffffff, 0x00000001, 0x00000001, 0x00000003, + /*b8000010:*/ 0x04070001, 0x04070001, 0x04070001, 0xffffffff, + /*b8000020:*/ 0x00001be8, 0x00001be8, 0x00001be8, 0xffffffff, + /*b8000030:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001, + /*b8000040:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001, + /*b8000050:*/ 0x00000000, 0x00000000, 0x00080004, 0x00020001, + /*b8000060:*/ 0x00000000, 0x00000000, 0x00081000, 0x001f7777, + /*b8000070:*/ 0x00000000, 0x00000000, 0x0c00ac2b, 0x0000fa50, + /*b8000080:*/ 0x00001000, 0x00001800, 0x00000000, 0x00000000, + /*b8000090:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80000a0:*/ 0x00000000, 0x00000050, 0x00000010, 0x00000000, + /*b80000b0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80000c0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80000d0:*/ 0xffffffff, 0x00000000, 0x00000000 +}; +const static u32 switch_reset_offset_100[] = { + /*b8000100:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000110:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000120:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000130:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000140:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000150:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000160:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000170:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000180:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b8000190:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80001a0:*/ 0x00000000, 0x00000000, 0x00000000, 0x00000000, + /*b80001b0:*/ 0x00000000, 0x00000000 +}; + +/* + * Switch Reset. + */ +void switchip_reset(void) +{ + volatile unsigned int *reg; + volatile unsigned int rdreg; + int i; + + sys1_w32(SYS1_CLKENR_ETHSW, clkenr); + asm("sync"); + + /* disable P0 */ + es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p0_ctl); + /* disable P1 */ + es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p1_ctl); + /* disable P2 */ + es_w32_mask(0, LTQ_ES_P0_CTL_REG_SPS_VAL(1), p2_ctl); + + /************************************** + * BEGIN: Procedure to clear MAC table + **************************************/ + for (i = 0; i < 3; i++) { + int result; + + /* check if access engine is available */ + while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY); + + /* initialise to first address */ + es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(3) + | LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(0), adr_tb_ctl2); + + /* wait while busy */ + while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY); + + /* setup the portmap */ + es_w32_mask(0, LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(1 << i), + adr_tb_ctl1); + + do { + /* search for addresses by port */ + es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(2) + | LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(9), adr_tb_ctl2); + + /* wait while busy */ + while (es_r32(adr_tb_st2) & LTQ_ES_ADR_TB_ST2_REG_BUSY); + + result = LTQ_ES_ADR_TB_ST2_REG_RSLT_GET(es_r32(adr_tb_st2)); + if (result == 0x101) { + printk(KERN_ERR "%s, cmd error\n", __func__); + return; + } + /* if Command OK, address found... */ + if (result == 0) { + unsigned char mac[6]; + + mac[5] = (es_r32(adr_tb_st0) >> 0) & 0xff; + mac[4] = (es_r32(adr_tb_st0) >> 8) & 0xff; + mac[3] = (es_r32(adr_tb_st0) >> 16) & 0xff; + mac[2] = (es_r32(adr_tb_st0) >> 24) & 0xff; + mac[1] = (es_r32(adr_tb_st1) >> 0) & 0xff; + mac[0] = (es_r32(adr_tb_st1) >> 8) & 0xff; + + /* setup address */ + es_w32((mac[5] << 0) | + (mac[4] << 8) | + (mac[3] << 16) | + (mac[2] << 24), adr_tb_ctl0); + es_w32(LTQ_ES_ADR_TB_CTL1_REG_PMAP_VAL(1<<i) | + LTQ_ES_ADR_TB_CTL1_REG_FID_VAL(0) | + (mac[0] << 8) | + (mac[1] << 0), adr_tb_ctl1); + /* erase address */ + + es_w32(LTQ_ES_ADR_TB_CTL2_REG_CMD_VAL(1) | + LTQ_ES_ADR_TB_CTL2_REG_AC_VAL(15), + adr_tb_ctl2); + + /* wait, while busy */ + while (es_r32(adr_tb_st2) & + LTQ_ES_ADR_TB_ST2_REG_BUSY); + } + } while (result == 0); + } + /************************************** + * END: Procedure to clear MAC table + **************************************/ + + /* reset RMON counters */ + es_w32(LTQ_ES_RMON_CTL_REG_BAS | LTQ_ES_RMON_CTL_REG_CAC_VAL(3), + rmon_ctl); + + /* bring all registers to reset state */ + reg = LTQ_ES_PS_REG; + for (i = 0; i < ARRAY_SIZE(switch_reset_offset_000); i++) { + if ((reg == LTQ_ES_PS_REG) || + (reg >= LTQ_ES_ADR_TB_CTL0_REG && + reg <= LTQ_ES_ADR_TB_ST2_REG)) + continue; + + if (switch_reset_offset_000[i] != 0xFFFFFFFF) { + /* write reset value to register */ + *reg = switch_reset_offset_000[i]; + /* read register value back */ + rdreg = *reg; + if (reg == LTQ_ES_SW_GCTL1_REG) + rdreg &= ~LTQ_ES_SW_GCTL1_REG_BISTDN; + /* compare read value with written one */ + if (rdreg != switch_reset_offset_000[i]) { + printk(KERN_ERR "%s,%d: reg %08x mismatch " + "[has:%08x, expect:%08x]\n", + __func__, __LINE__, + (unsigned int)reg, rdreg, + switch_reset_offset_000[i]); + } + } + reg++; + } + + reg = LTQ_ES_VLAN_FLT0_REG; + for (i = 0; i < ARRAY_SIZE(switch_reset_offset_100); i++) { + *reg = switch_reset_offset_100[i]; + rdreg = *reg; + if (rdreg != switch_reset_offset_100[i]) { + printk(KERN_ERR "%s,%d: reg %08x mismatch " + "[has:%08x, expect:%08x]\n", __func__, __LINE__, + (unsigned int)reg, rdreg, + switch_reset_offset_100[i]); + } + reg++; + } +} +EXPORT_SYMBOL(switchip_reset); + +static u32 get_phy_oui(unsigned char phy_addr) +{ + u32 oui; + int i, bit, byte, shift, w; + u16 reg_id[2]; + + /* read PHY identifier registers 1 and 2 */ + reg_id[0] = switchip_phy_read(phy_addr, 2); + reg_id[1] = switchip_phy_read(phy_addr, 3); + + oui = 0; + w = 1; + shift = 7; + byte = 1; + for (i = 0, bit = 10; i <= 21; i++, bit++) { + oui |= ((reg_id[w] & (1<<bit)) ? 1 : 0) << shift; + if (!(shift % 8)) { + byte++; + if (byte == 2) + shift = 15; + else + shift = 21; + } else { + shift--; + } + if (w == 1 && bit == 15) { + bit = -1; + w = 0; + } + } + return oui; +} + +/* + * Switch Initialization. + */ +int switchip_init(void) +{ + int eth_port, phy_present = 0; + u16 reg, mode; + + sys1_w32(SYS1_CLKENR_ETHSW, clkenr); + asm("sync"); + + /* Enable Switch, if not already done so */ + if ((es_r32(sw_gctl0) & LTQ_ES_SW_GCTL0_REG_SE) == 0) + es_w32_mask(0, LTQ_ES_SW_GCTL0_REG_SE, sw_gctl0); + /* Wait for completion of MBIST */ + while (LTQ_ES_SW_GCTL1_REG_BISTDN_GET(es_r32(sw_gctl1)) == 0); + + switchip_reset(); + + mode = LTQ_ES_RGMII_CTL_REG_IS_GET(es_r32(rgmii_ctl)); + eth_port = (mode == 2 ? 1 : 0); + + /* Set the primary port(port toward backplane) as sniffer port, + changing from P2 which is the reset setting */ + es_w32_mask(LTQ_ES_SW_GCTL0_REG_SNIFFPN, + LTQ_ES_SW_GCTL0_REG_SNIFFPN_VAL(eth_port), + sw_gctl0); + + /* Point MDIO state machine to invalid PHY addresses 8 and 9 */ + es_w32_mask(0, LTQ_ES_SW_GCTL0_REG_PHYBA, sw_gctl0); + + /* Add CRC for packets from DMA to PMAC. + Remove CRC for packets from PMAC to DMA. */ + es_w32(LTQ_ES_PMAC_HD_CTL_RC | LTQ_ES_PMAC_HD_CTL_AC, pmac_hd_ctl); + + phy_oui = get_phy_oui(0); + switch (phy_oui) { +#ifdef CONFIG_LANTIQ_MACH_EASY336 + case PHY_OUI_PMC: + phy_address[0] = (mode == 2 ? -1 : 2); + phy_address[1] = (mode == 2 ? 2 : -1); + break; +#endif + case PHY_OUI_VITESSE: + default: + phy_oui = PHY_OUI_DEFAULT; + phy_address[0] = (mode == 2 ? 1 : 0); + phy_address[1] = (mode == 2 ? 0 : 1); + break; + } + + /****** PORT 0 *****/ + reg = switchip_phy_read(phy_address[0], 1); + if ((reg != 0x0000) && (reg != 0xffff)) { + /* PHY connected? */ + phy_present |= 1; + /* Set Rx- and TxDelay in case of RGMII */ + switch (mode) { + case 0: /* *RGMII,RGMII */ + case 2: /* RGMII,*GMII */ + /* program clock delay in PHY, not in SVIP */ + + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0RDLY, 0, rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0TDLY, 0, rgmii_ctl); + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + switchip_phy_write(phy_address[0], 31, 0x0001); + switchip_phy_write(phy_address[0], 28, 0xA000); + switchip_phy_write(phy_address[0], 31, 0x0000); + } + default: + break; + } + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + /* Program PHY advertisements and + * restart auto-negotiation */ + switchip_phy_write(phy_address[0], 4, 0x05E1); + switchip_phy_write(phy_address[0], 9, 0x0300); + switchip_phy_write(phy_address[0], 0, 0x3300); + } else { + reg = switchip_phy_read(phy_address[1], 0); + reg |= 0x1000; /* auto-negotiation enable */ + switchip_phy_write(phy_address[1], 0, reg); + reg |= 0x0200; /* auto-negotiation restart */ + switchip_phy_write(phy_address[1], 0, reg); + } + } else { + /* Force SWITCH link with highest capability: + * 100M FD for MII + * 1G FD for GMII/RGMII + */ + switch (mode) { + case 1: /* *MII,MII */ + case 3: /* *MII,RGMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(1), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(1), + rgmii_ctl); + break; + case 0: /* *RGMII,RGMII */ + case 2: /* RGMII,*GMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0DUP_VAL(1), + rgmii_ctl); + + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P0RDLY, 0, rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P0TDLY_VAL(2), + rgmii_ctl); + break; + } + + es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl); + } + + /****** PORT 1 *****/ + reg = switchip_phy_read(phy_address[1], 1); + if ((reg != 0x0000) && (reg != 0xffff)) { + /* PHY connected? */ + phy_present |= 2; + /* Set Rx- and TxDelay in case of RGMII */ + switch (mode) { + case 0: /* *RGMII,RGMII */ + case 3: /* *MII,RGMII */ + /* program clock delay in PHY, not in SVIP */ + + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1RDLY, 0, rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1TDLY, 0, rgmii_ctl); + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + switchip_phy_write(phy_address[1], 31, 0x0001); + switchip_phy_write(phy_address[1], 28, 0xA000); + switchip_phy_write(phy_address[1], 31, 0x0000); + } + break; + case 2: /* RGMII,*GMII */ + + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); +#ifdef CONFIG_LANTIQ_MACH_EASY336 + if (phy_oui == PHY_OUI_PMC) { + switchip_phy_write(phy_address[1], 24, 0x0510); + switchip_phy_write(phy_address[1], 17, 0xA38C); + switchip_phy_write(phy_address[1], 17, 0xA384); + } +#endif + break; + default: + break; + } + /* Program PHY advertisements and restart auto-negotiation */ + if (phy_oui == PHY_OUI_VITESSE || + phy_oui == PHY_OUI_DEFAULT) { + switchip_phy_write(phy_address[1], 4, 0x05E1); + switchip_phy_write(phy_address[1], 9, 0x0300); + switchip_phy_write(phy_address[1], 0, 0x3300); + } else { + reg = switchip_phy_read(phy_address[1], 0); + reg |= 0x1000; /* auto-negotiation enable */ + switchip_phy_write(phy_address[1], 0, reg); + reg |= 0x0200; /* auto-negotiation restart */ + switchip_phy_write(phy_address[1], 0, reg); + } + } else { + /* Force SWITCH link with highest capability: + * 100M FD for MII + * 1G FD for GMII/RGMII + */ + switch (mode) { + case 1: /* *MII,MII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(1), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); + break; + case 0: /* *RGMII,RGMII */ + case 3: /* *MII,RGMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); + es_w32_mask(LTQ_ES_RGMII_CTL_REG_P1RDLY, 0, rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1TDLY_VAL(2), + rgmii_ctl); + break; + case 2: /* RGMII,*GMII */ + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1SPD_VAL(2), + rgmii_ctl); + es_w32_mask(0, LTQ_ES_RGMII_CTL_REG_P1DUP, rgmii_ctl); + break; + } + es_w32_mask(0, LTQ_ES_P0_CTL_REG_FLP, p0_ctl); + } + + /* + * Allow unknown unicast/multicast and broadcasts + * on all ports. + */ + + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_UP_VAL(7), sw_gctl1); + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_BP_VAL(7), sw_gctl1); + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_MP_VAL(7), sw_gctl1); + es_w32_mask(0, LTQ_ES_SW_GCTL1_REG_RP_VAL(7), sw_gctl1); + + /* Enable LAN port(s) */ + if (eth_port == 0) + es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p0_ctl); + else + es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p1_ctl); + /* Enable CPU Port (Forwarding State) */ + es_w32_mask(LTQ_ES_P0_CTL_REG_SPS, 0, p2_ctl); + + if (phy_present) + switchip_mdio_poll_init(); + + return 0; +} +EXPORT_SYMBOL(switchip_init); + +device_initcall(switchip_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/clk.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/clk.c new file mode 100644 index 0000000000..5d850dc7b3 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/clk.c @@ -0,0 +1,329 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +#include "../clk.h" + +static unsigned int ltq_ram_clocks[] = { + CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; +#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3] + +#define BASIC_FREQUENCY_1 35328000 +#define BASIC_FREQUENCY_2 36000000 +#define BASIS_REQUENCY_USB 12000000 + +#define GET_BITS(x, msb, lsb) \ + (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) + +/* legacy xway clock */ +#define LTQ_CGU_PLL0_CFG 0x0004 +#define LTQ_CGU_PLL1_CFG 0x0008 +#define LTQ_CGU_PLL2_CFG 0x000C +#define LTQ_CGU_SYS 0x0010 +#define LTQ_CGU_UPDATE 0x0014 +#define LTQ_CGU_IF_CLK 0x0018 +#define LTQ_CGU_OSC_CON 0x001C +#define LTQ_CGU_SMD 0x0020 +#define LTQ_CGU_CT1SR 0x0028 +#define LTQ_CGU_CT2SR 0x002C +#define LTQ_CGU_PCMCR 0x0030 +#define LTQ_CGU_PCI_CR 0x0034 +#define LTQ_CGU_PD_PC 0x0038 +#define LTQ_CGU_FMR 0x003C + +#define CGU_PLL0_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31)) +#define CGU_PLL0_BYPASS \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30)) +#define CGU_PLL0_CFG_DSMSEL \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28)) +#define CGU_PLL0_CFG_FRAC_EN \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27)) +#define CGU_PLL1_SRC \ + (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31)) +#define CGU_PLL2_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20)) +#define CGU_SYS_FPI_SEL (1 << 6) +#define CGU_SYS_DDR_SEL 0x3 +#define CGU_PLL0_SRC (1 << 29) + +#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17) +#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6) +#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2) +#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17) +#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13) + +/* vr9 clock */ +#define LTQ_CGU_SYS_VR9 0x0c +#define LTQ_CGU_IF_CLK_VR9 0x24 + + +static unsigned int ltq_get_pll0_fdiv(void); + +static inline unsigned int get_input_clock(int pll) +{ + switch (pll) { + case 0: + if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 1: + if (CGU_PLL1_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 2: + switch (CGU_PLL2_SRC) { + case 0: + return ltq_get_pll0_fdiv(); + case 1: + return CGU_PLL2_PHASE_DIVIDER_ENABLE ? + BASIC_FREQUENCY_1 : + BASIC_FREQUENCY_2; + case 2: + return BASIS_REQUENCY_USB; + } + default: + return 0; + } +} + +static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den) +{ + u64 res, clock = get_input_clock(pll); + + res = num * clock; + do_div(res, den); + return res; +} + +static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 10) + K; + unsigned int den = (M + 1) << 10; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 11) + K + 512; + unsigned int den = (M + 1) << 11; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = K >= 512 ? + ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584; + unsigned int den = (M + 1) << 12; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int dsm(int pll, unsigned int M, unsigned int N, + unsigned int K, unsigned int dsmsel, unsigned int phase_div_en) +{ + if (!dsmsel) + return mash_dsm(pll, M, N, K); + else if (!phase_div_en) + return mash_dsm(pll, M, N, K); + else + return ssff_dsm_2(pll, M, N, K); +} + +static inline unsigned int ltq_get_pll0_fosc(void) +{ + if (CGU_PLL0_BYPASS) + return get_input_clock(0); + else + return !CGU_PLL0_CFG_FRAC_EN + ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, + CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE) + : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, + CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE); +} + +static unsigned int ltq_get_pll0_fdiv(void) +{ + unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1; + + return (ltq_get_pll0_fosc() + (div >> 1)) / div; +} + +unsigned long ltq_danube_io_region_clock(void) +{ + unsigned int ret = ltq_get_pll0_fosc(); + + switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0x3) { + default: + case 0: + return (ret + 1) / 2; + case 1: + return (ret * 2 + 2) / 5; + case 2: + return (ret + 1) / 3; + case 3: + return (ret + 2) / 4; + } +} + +unsigned long ltq_danube_fpi_bus_clock(int fpi) +{ + unsigned long ret = ltq_danube_io_region_clock(); + + if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL)) + ret >>= 1; + return ret; +} + +unsigned long ltq_danube_fpi_hz(void) +{ + unsigned long ddr_clock = DDR_HZ; + + if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40) + return ddr_clock >> 1; + return ddr_clock; +} + +unsigned long ltq_danube_cpu_hz(void) +{ + switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) { + case 0: + return CLOCK_333M; + case 4: + return DDR_HZ; + case 8: + return DDR_HZ << 1; + default: + return DDR_HZ >> 1; + } +} + +unsigned long ltq_ar9_sys_hz(void) +{ + if (((ltq_cgu_r32(LTQ_CGU_SYS) >> 3) & 0x3) == 0x2) + return CLOCK_393M; + return CLOCK_333M; +} + +unsigned long ltq_ar9_fpi_hz(void) +{ + unsigned long sys = ltq_ar9_sys_hz(); + + if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(0)) + return sys; + return sys >> 1; +} + +unsigned long ltq_ar9_cpu_hz(void) +{ + if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(2)) + return ltq_ar9_fpi_hz(); + else + return ltq_ar9_sys_hz(); +} + +unsigned long ltq_vr9_cpu_hz(void) +{ + unsigned int cpu_sel; + unsigned long clk; + + cpu_sel = (ltq_cgu_r32(LTQ_CGU_SYS_VR9) >> 4) & 0xf; + + switch (cpu_sel) { + case 0: + clk = CLOCK_600M; + break; + case 1: + clk = CLOCK_500M; + break; + case 2: + clk = CLOCK_393M; + break; + case 3: + clk = CLOCK_333M; + break; + case 5: + case 6: + clk = CLOCK_196_608M; + break; + case 7: + clk = CLOCK_167M; + break; + case 4: + case 8: + case 9: + clk = CLOCK_125M; + break; + default: + clk = 0; + break; + } + + return clk; +} + +unsigned long ltq_vr9_fpi_hz(void) +{ + unsigned int ocp_sel, cpu_clk; + unsigned long clk; + + cpu_clk = ltq_vr9_cpu_hz(); + ocp_sel = ltq_cgu_r32(LTQ_CGU_SYS_VR9) & 0x3; + + switch (ocp_sel) { + case 0: + /* OCP ratio 1 */ + clk = cpu_clk; + break; + case 2: + /* OCP ratio 2 */ + clk = cpu_clk / 2; + break; + case 3: + /* OCP ratio 2.5 */ + clk = (cpu_clk * 2) / 5; + break; + case 4: + /* OCP ratio 3 */ + clk = cpu_clk / 3; + break; + default: + clk = 0; + break; + } + + return clk; +} + +unsigned long ltq_vr9_fpi_bus_clock(int fpi) +{ + return ltq_vr9_fpi_hz(); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.c new file mode 100644 index 0000000000..56086fa139 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.c @@ -0,0 +1,70 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#define LTQ_USB_IOMEM_BASE 0x1e101000 +#define LTQ_USB_IOMEM_SIZE 0x00001000 + +static struct resource resources[] = +{ + [0] = { + .name = "dwc_otg_membase", + .start = LTQ_USB_IOMEM_BASE, + .end = LTQ_USB_IOMEM_BASE + LTQ_USB_IOMEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "dwc_otg_irq", + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 dwc_dmamask = (u32)0x1fffffff; + +static struct platform_device platform_dev = { + .name = "dwc_otg", + .dev = { + .dma_mask = &dwc_dmamask, + }, + .resource = resources, + .num_resources = ARRAY_SIZE(resources), +}; + +int __init +xway_register_dwc(int pin) +{ + struct irq_data d; + d.irq = resources[1].start; + ltq_enable_irq(&d); + resources[1].start = ltq_is_ase() ? LTQ_USB_ASE_INT : LTQ_USB_INT; + platform_dev.dev.platform_data = (void*) pin; + return platform_device_register(&platform_dev); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.h new file mode 100644 index 0000000000..521fad05ef --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-dwc_otg.h @@ -0,0 +1,17 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEV_DWC_H__ +#define _LTQ_DEV_DWC_H__ + +#include <lantiq_platform.h> + +extern void __init xway_register_dwc(int pin); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-ifxhcd.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-ifxhcd.c new file mode 100644 index 0000000000..ea08a359ff --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-ifxhcd.c @@ -0,0 +1,45 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +static u64 dmamask = (u32)0x1fffffff; + +static struct platform_device platform_dev = { + .name = "ifxusb_hcd", + .dev.dma_mask = &dmamask, +}; + +int __init +xway_register_hcd(int *pins) +{ + platform_dev.dev.platform_data = pins; + return platform_device_register(&platform_dev); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-ifxhcd.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-ifxhcd.h new file mode 100644 index 0000000000..18b3d2dae4 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-ifxhcd.h @@ -0,0 +1,17 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEV_HCD_H__ +#define _LTQ_DEV_HCD_H__ + +#include <lantiq_platform.h> + +extern void __init xway_register_hcd(int *pin); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.c new file mode 100644 index 0000000000..a75abe3e00 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * Copyright (C) 2011 Andrej VlaÅ¡ić <andrej.vlasic0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ath5k_platform.h> +#include <linux/ath9k_platform.h> +#include <linux/pci.h> + +#include "dev-wifi-athxk.h" + +extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev); +struct ath5k_platform_data ath5k_pdata; +struct ath9k_platform_data ath9k_pdata = { + .led_pin = -1, + .endian_check = true, +}; + +static int +ath5k_pci_plat_dev_init(struct pci_dev *dev) +{ + dev->dev.platform_data = &ath5k_pdata; + return 0; +} + +static int +ath9k_pci_plat_dev_init(struct pci_dev *dev) +{ + dev->dev.platform_data = &ath9k_pdata; + return 0; +} + +void __init +ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr) +{ + ath5k_pdata.eeprom_data = eeprom_data; + ath5k_pdata.macaddr = macaddr; + ltqpci_plat_dev_init = ath5k_pci_plat_dev_init; +} + +void __init +ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr) +{ + memcpy(ath9k_pdata.eeprom_data, eeprom_data, sizeof(ath9k_pdata.eeprom_data)); + ath9k_pdata.macaddr = macaddr; + ltqpci_plat_dev_init = ath9k_pci_plat_dev_init; +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.h new file mode 100644 index 0000000000..5fdb46b612 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-athxk.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * Copyright (C) 2011 Andrej VlaÅ¡ić <andrej.vlasic0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _DEV_WIFI_ATHXK_H__ +#define _DEV_WIFI_ATHXK_H__ + +extern void ltq_register_ath5k(u16 *eeprom_data, u8 *macaddr); +extern void ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.c new file mode 100644 index 0000000000..8e271f06ec --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rt2x00_platform.h> +#include <linux/pci.h> + +#include "dev-wifi-rt2x00.h" + +extern int (*ltqpci_plat_dev_init)(struct pci_dev *dev); +struct rt2x00_platform_data rt2x00_pdata; + +static int +rt2x00_pci_plat_dev_init(struct pci_dev *dev) +{ + dev->dev.platform_data = &rt2x00_pdata; + return 0; +} + +void __init +ltq_register_rt2x00(const char *firmware, const u8 *mac) +{ + rt2x00_pdata.eeprom_file_name = kstrdup(firmware, GFP_KERNEL); + rt2x00_pdata.mac_address = mac; + ltqpci_plat_dev_init = rt2x00_pci_plat_dev_init; +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.h new file mode 100644 index 0000000000..941c26535f --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/dev-wifi-rt2x00.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _DEV_WIFI_RT2X00_H__ +#define _DEV_WIFI_RT2X00_H__ + +extern void ltq_register_rt2x00(const char *firmware, const u8 *mac); + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/gptu.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/gptu.c new file mode 100644 index 0000000000..ac82c37eba --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/gptu.c @@ -0,0 +1,176 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/export.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <asm/reboot.h> + +#include <lantiq_soc.h> +#include "../clk.h" + +#include "../devices.h" + +#define ltq_gptu_w32(x, y) ltq_w32((x), ltq_gptu_membase + (y)) +#define ltq_gptu_r32(x) ltq_r32(ltq_gptu_membase + (x)) + + +/* the magic ID byte of the core */ +#define GPTU_MAGIC 0x59 +/* clock control register */ +#define GPTU_CLC 0x00 +/* id register */ +#define GPTU_ID 0x08 +/* interrupt node enable */ +#define GPTU_IRNEN 0xf4 +/* interrupt control register */ +#define GPTU_IRCR 0xf8 +/* interrupt capture register */ +#define GPTU_IRNCR 0xfc +/* there are 3 identical blocks of 2 timers. calculate register offsets */ +#define GPTU_SHIFT(x) (x % 2 ? 4 : 0) +#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10) +/* timer control register */ +#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00) +/* timer auto reload register */ +#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08) +/* timer manual reload register */ +#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10) +/* timer count register */ +#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18) + +/* GPTU_CON(x) */ +#define CON_CNT BIT(2) +#define CON_EDGE_FALL BIT(7) +#define CON_SYNC BIT(8) +#define CON_CLK_INT BIT(10) + +/* GPTU_RUN(x) */ +#define RUN_SEN BIT(0) +#define RUN_RL BIT(2) + +/* set clock to runmode */ +#define CLC_RMC BIT(8) +/* bring core out of suspend */ +#define CLC_SUSPEND BIT(4) +/* the disable bit */ +#define CLC_DISABLE BIT(0) + +#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) + +enum gptu_timer { + TIMER1A = 0, + TIMER1B, + TIMER2A, + TIMER2B, + TIMER3A, + TIMER3B +}; + +static struct resource ltq_gptu_resource = + MEM_RES("GPTU", LTQ_GPTU_BASE_ADDR, LTQ_GPTU_SIZE); + +static void __iomem *ltq_gptu_membase; + +static irqreturn_t timer_irq_handler(int irq, void *priv) +{ + int timer = irq - TIMER_INTERRUPT; + ltq_gptu_w32(1 << timer, GPTU_IRNCR); + return IRQ_HANDLED; +} + +static void gptu_hwinit(void) +{ + struct clk *clk = clk_get_sys("ltq_gptu", NULL); + clk_enable(clk); + ltq_gptu_w32(0x00, GPTU_IRNEN); + ltq_gptu_w32(0xff, GPTU_IRNCR); + ltq_gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC); +} + +static void gptu_hwexit(void) +{ + ltq_gptu_w32(0x00, GPTU_IRNEN); + ltq_gptu_w32(0xff, GPTU_IRNCR); + ltq_gptu_w32(CLC_DISABLE, GPTU_CLC); +} + +static int ltq_gptu_enable(struct clk *clk) +{ + int ret = request_irq(TIMER_INTERRUPT + clk->bits, timer_irq_handler, + IRQF_TIMER, "timer", NULL); + if (ret) { + pr_err("gptu: failed to request irq\n"); + return ret; + } + + ltq_gptu_w32(CON_CNT | CON_EDGE_FALL | CON_SYNC | CON_CLK_INT, + GPTU_CON(clk->bits)); + ltq_gptu_w32(1, GPTU_RLD(clk->bits)); + ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) | clk->bits, GPTU_IRNEN); + ltq_gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits)); + return 0; +} + +static void ltq_gptu_disable(struct clk *clk) +{ + ltq_gptu_w32(0, GPTU_RUN(clk->bits)); + ltq_gptu_w32(0, GPTU_CON(clk->bits)); + ltq_gptu_w32(0, GPTU_RLD(clk->bits)); + ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) & ~clk->bits, GPTU_IRNEN); + free_irq(TIMER_INTERRUPT + clk->bits, NULL); +} + +static inline void clkdev_add_gptu(const char *con, unsigned int timer) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = "ltq_gptu"; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = ltq_gptu_enable; + clk->disable = ltq_gptu_disable; + clk->bits = timer; + clkdev_add(&clk->cl); +} + +static int __init gptu_setup(void) +{ + /* remap gptu register range */ + ltq_gptu_membase = ltq_remap_resource(<q_gptu_resource); + if (!ltq_gptu_membase) + panic("Failed to remap gptu memory"); + + /* power up the core */ + gptu_hwinit(); + + /* the gptu has a ID register */ + if (((ltq_gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) { + pr_err("gptu: failed to find magic\n"); + gptu_hwexit(); + return -ENAVAIL; + } + + /* register the clocks */ + clkdev_add_gptu("timer1a", TIMER1A); + clkdev_add_gptu("timer1b", TIMER1B); + clkdev_add_gptu("timer2a", TIMER2A); + clkdev_add_gptu("timer2b", TIMER2B); + clkdev_add_gptu("timer3a", TIMER3A); + clkdev_add_gptu("timer3b", TIMER3B); + + pr_info("gptu: 6 timers loaded\n"); + + return 0; +} + +arch_initcall(gptu_setup); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-arv.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-arv.c new file mode 100644 index 0000000000..6857e993d2 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-arv.c @@ -0,0 +1,793 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/etherdevice.h> +#include <linux/ath5k_platform.h> +#include <linux/ath9k_platform.h> +#include <linux/pci.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "dev-wifi-rt2x00.h" +#include "dev-wifi-athxk.h" +#include "devices.h" +#include "dev-dwc_otg.h" +#include "pci-ath-fixup.h" + +static struct mtd_partition arv45xx_brnboot_partitions[] = +{ + { + .name = "brn-boot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "config", + .offset = 0x20000, + .size = 0x30000, + }, + { + .name = "linux", + .offset = 0x50000, + .size = 0x390000, + }, + { + .name = "reserved", /* 12-byte signature at 0x3efff4 :/ */ + .offset = 0x3e0000, + .size = 0x010000, + }, + { + .name = "eeprom", + .offset = 0x3f0000, + .size = 0x10000, + }, +}; + +static struct mtd_partition arv75xx_brnboot_partitions[] = +{ + { + .name = "brn-boot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "config", + .offset = 0x20000, + .size = 0x40000, + }, + { + .name = "linux", + .offset = 0x440000, + .size = 0x3a0000, + }, + { + .name = "reserved", /* 12-byte signature at 0x7efff4 :/ */ + .offset = 0x7e0000, + .size = 0x010000, + }, + { + .name = "board_config", + .offset = 0x7f0000, + .size = 0x10000, + }, +}; + +/* + * this is generic configuration for all arv based boards, note that it can be + * rewriten in arv_load_nor() + */ +static struct mtd_partition arv_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "uboot_env", + .offset = 0x20000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x30000, + .size = 0x3c0000, + }, + { + .name = "board_config", + .offset = 0x3f0000, + .size = 0x10000, + }, +}; + +static struct physmap_flash_data arv45xx_brnboot_flash_data = { + .nr_parts = ARRAY_SIZE(arv45xx_brnboot_partitions), + .parts = arv45xx_brnboot_partitions, +}; + +static struct physmap_flash_data arv75xx_brnboot_flash_data = { + .nr_parts = ARRAY_SIZE(arv75xx_brnboot_partitions), + .parts = arv75xx_brnboot_partitions, +}; + +static struct physmap_flash_data arv_flash_data = { + .nr_parts = ARRAY_SIZE(arv_partitions), + .parts = arv_partitions, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_EXT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static struct gpio_led +arv4510pw_gpio_leds[] __initdata = { + { .name = "soc:green:foo", .gpio = 4, .active_low = 1, }, +}; + +static struct gpio_led +arv4518pw_gpio_leds[] __initdata = { + { .name = "soc:green:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:fail", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:usb", .gpio = 19, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:voip", .gpio = 100, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs1", .gpio = 101, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs2", .gpio = 102, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_keys_button +arv4518pw_gpio_keys[] __initdata = { + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 28, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 30, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 29, + .active_low = 1, + }, +}; + +static struct gpio_led +arv4519pw_gpio_leds[] __initdata = { + { .name = "soc:red:power", .gpio = 7, .active_low = 1, }, + { .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, }, + { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 5, .active_low = 1, }, + { .name = "soc:red:internet", .gpio = 8, .active_low = 1, }, + { .name = "soc:green:voip", .gpio = 100, .active_low = 1, }, + { .name = "soc:green:phone1", .gpio = 101, .active_low = 1, }, + { .name = "soc:green:phone2", .gpio = 102, .active_low = 1, }, + { .name = "soc:green:fxo", .gpio = 103, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 19, .active_low = 1, }, + { .name = "soc:orange:wps", .gpio = 104, .active_low = 1, }, + { .name = "soc:green:wps", .gpio = 105, .active_low = 1, }, + { .name = "soc:red:wps", .gpio = 106, .active_low = 1, }, + +}; + +static struct gpio_keys_button +arv4519pw_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 30, + .active_low = 1, + }, + { + .desc = "wlan", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 28, + .active_low = 1, + }, +}; + +static struct gpio_led +arv4520pw_gpio_leds[] __initdata = { + { .name = "soc:blue:power", .gpio = 3, .active_low = 1, }, + { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:blue:internet", .gpio = 5, .active_low = 1, }, + { .name = "soc:red:power", .gpio = 6, .active_low = 1, }, + { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, }, + { .name = "soc:red:wps", .gpio = 9, .active_low = 1, }, + { .name = "soc:blue:voip", .gpio = 100, .active_low = 1, }, + { .name = "soc:blue:fxs1", .gpio = 101, .active_low = 1, }, + { .name = "soc:blue:fxs2", .gpio = 102, .active_low = 1, }, + { .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, }, + { .name = "soc:blue:voice", .gpio = 104, .active_low = 1, }, + { .name = "soc:blue:usb", .gpio = 105, .active_low = 1, }, + { .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, }, +}; + +static struct gpio_led +arv452cpw_gpio_leds[] __initdata = { + { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:adsl", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:isdn", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:yellow:wps", .gpio = 7, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:wps", .gpio = 9, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:fxs1", .gpio = 100, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:fxs2", .gpio = 101, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wps", .gpio = 102, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:internet", .gpio = 108, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:internet", .gpio = 109, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_led +arv4525pw_gpio_leds[] __initdata = { + { .name = "soc:green:dsl", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:online", .gpio = 9, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs-internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:fxs-festnetz", .gpio = 4, .active_low = 1, .default_trigger = "default-on" }, +}; + +#define ARV4525PW_PHYRESET 13 +#define ARV4525PW_RELAY 31 + +static struct gpio +arv4525pw_gpios[] __initdata = { + { ARV4525PW_PHYRESET, GPIOF_OUT_INIT_HIGH, "phyreset" }, + { ARV4525PW_RELAY, GPIOF_OUT_INIT_HIGH, "relay" }, +}; + + +static struct gpio_led +arv752dpw22_gpio_leds[] __initdata = { + { .name = "soc:blue:power", .gpio = 3, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:internet", .gpio = 5, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:power", .gpio = 6, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:wps", .gpio = 8, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:fxo", .gpio = 103, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:voice", .gpio = 104, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:usb", .gpio = 105, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 106, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi1", .gpio = 107, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wifi", .gpio = 108, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:blue:wifi1", .gpio = 109, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth1", .gpio = 111, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth2", .gpio = 112, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth3", .gpio = 113, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:eth4", .gpio = 114, .active_low = 1, .default_trigger = "default-on", }, +}; + +static struct gpio_keys_button +arv752dpw22_gpio_keys[] __initdata = { + { + .desc = "btn0", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + }, + { + .desc = "btn1", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 13, + .active_low = 1, + }, + { + .desc = "btn2", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 28, + .active_low = 1, + }, +}; + +static struct gpio_led +arv7518pw_gpio_leds[] __initdata = { + { .name = "soc:red:power", .gpio = 7, .active_low = 1, }, + { .name = "soc:green:power", .gpio = 2, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wifi", .gpio = 6, .active_low = 1, }, + { .name = "soc:green:adsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 5, .active_low = 1, }, + { .name = "soc:red:internet", .gpio = 8, .active_low = 1, }, + { .name = "soc:green:voip", .gpio = 100, .active_low = 1, }, + { .name = "soc:green:phone1", .gpio = 101, .active_low = 1, }, + { .name = "soc:green:phone2", .gpio = 102, .active_low = 1, }, + { .name = "soc:orange:fail", .gpio = 103, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 19, .active_low = 1, }, + { .name = "soc:orange:wps", .gpio = 104, .active_low = 1, }, + { .name = "soc:green:wps", .gpio = 105, .active_low = 1, }, + { .name = "soc:red:wps", .gpio = 106, .active_low = 1, }, + +}; + +static struct gpio_keys_button +arv7518pw_gpio_keys[] __initdata = { + /*{ + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 23, + .active_low = 1, + },*/ + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 25, + .active_low = 1, + }, +}; + +static struct gpio_keys_button +arv7525pw_gpio_keys[] __initdata = { + { + .desc = "restart", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 29, + .active_low = 1, + }, +}; + +static void __init +arv_load_nor(unsigned int max) +{ +#define UBOOT_MAGIC 0x27051956 + + int i; + int sector = -1; + + if (ltq_brn_boot) { + if (max == 0x800000) + ltq_register_nor(&arv75xx_brnboot_flash_data); + else + ltq_register_nor(&arv45xx_brnboot_flash_data); + return; + } + + for (i = 1; i < 4 && sector < 0; i++) { + unsigned int uboot_magic; + memcpy_fromio(&uboot_magic, (void *)KSEG1ADDR(LTQ_FLASH_START) + (i * 0x10000), 4); + if (uboot_magic == UBOOT_MAGIC) + sector = i; + } + + if (sector < 0) + return; + + arv_partitions[0].size = arv_partitions[1].offset = (sector - 1) * 0x10000; + arv_partitions[2].offset = arv_partitions[0].size + 0x10000; + arv_partitions[2].size = max - arv_partitions[2].offset - 0x10000; + arv_partitions[3].offset = max - 0x10000; + ltq_register_nor(&arv_flash_data); +} + +static void __init +arv_register_ethernet(unsigned int mac_addr) +{ + memcpy_fromio(<q_eth_data.mac.sa_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6); + ltq_register_etop(<q_eth_data); +} + +static u16 arv_ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS]; +static u16 arv_ath9k_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; +static u8 arv_athxk_eeprom_mac[6]; + +static void __init +arv_register_ath5k(unsigned int ath_addr, unsigned int mac_addr) +{ + int i; + + memcpy_fromio(arv_athxk_eeprom_mac, + (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6); + arv_athxk_eeprom_mac[5]++; + memcpy_fromio(arv_ath5k_eeprom_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH5K_PLAT_EEP_MAX_WORDS); + // swap eeprom bytes + for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS>>1; i++) { + arv_ath5k_eeprom_data[i] = swab16(arv_ath5k_eeprom_data[i]); + if (i == 0x17e>>1) { + /* + * regdomain is invalid. it's unknown how did original + * fw convered value to 0x82d4 so for now force to 0x67 + */ + arv_ath5k_eeprom_data[i] &= 0x0000; + arv_ath5k_eeprom_data[i] |= 0x67; + } + } +} + +static void __init +arv_register_ath9k(unsigned int ath_addr, unsigned int mac_addr) +{ + int i; + u16 *eepdata, sum, el; + + memcpy_fromio(arv_athxk_eeprom_mac, + (void *)KSEG1ADDR(LTQ_FLASH_START + mac_addr), 6); + arv_athxk_eeprom_mac[5]++; + memcpy_fromio(arv_ath9k_eeprom_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + ath_addr), ATH9K_PLAT_EEP_MAX_WORDS); + + // force regdomain to 0x67 + arv_ath9k_eeprom_data[0x208>>1] = 0x67; + + // calculate new checksum + sum = arv_ath9k_eeprom_data[0x200>>1]; + el = sum / sizeof(u16) - 2; /* skip length and (old) checksum */ + eepdata = (u16 *) (&arv_ath9k_eeprom_data[0x204>>1]); /* after checksum */ + for (i = 0; i < el; i++) + sum ^= *eepdata++; + sum ^= 0xffff; + arv_ath9k_eeprom_data[0x202>>1] = sum; +} + +static void __init +arv3527p_init(void) +{ +#define ARV3527P_MAC_ADDR 0x3f0016 + + ltq_register_gpio_stp(); + // ltq_add_device_gpio_leds(arv3527p_gpio_leds, ARRAY_SIZE(arv3527p_gpio_leds)); + arv_load_nor(0x400000); + arv_register_ethernet(ARV3527P_MAC_ADDR); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV3527P, + "ARV3527P", + "ARV3527P - Arcor Easybox 401", + arv3527p_init); + +static void __init +arv4510pw_init(void) +{ +#define ARV4510PW_MAC_ADDR 0x3f0014 + + ltq_register_gpio_stp(); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4510pw_gpio_leds), arv4510pw_gpio_leds); + arv_load_nor(0x400000); + ltq_pci_data.irq[12] = (INT_NUM_IM2_IRL0 + 31); + ltq_pci_data.irq[15] = (INT_NUM_IM0_IRL0 + 26); + ltq_pci_data.gpio |= PCI_EXIN2 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + arv_register_ethernet(ARV4510PW_MAC_ADDR); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4510PW, + "ARV4510PW", + "ARV4510PW - Wippies Homebox", + arv4510pw_init); + +static void __init +arv4518pw_init(void) +{ +#define ARV4518PW_EBU 0 +#define ARV4518PW_USB 14 +#define ARV4518PW_SWITCH_RESET 13 +#define ARV4518PW_ATH_ADDR 0x3f0400 +#define ARV4518PW_MAC_ADDR 0x3f0016 + + ltq_register_gpio_ebu(ARV4518PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4518pw_gpio_leds), arv4518pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv4518pw_gpio_keys), arv4518pw_gpio_keys); + arv_load_nor(0x400000); + ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV4518PW_USB); + arv_register_ethernet(ARV4518PW_MAC_ADDR); + arv_register_ath5k(ARV4518PW_ATH_ADDR, ARV4518PW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_register_tapi(); + + gpio_request(ARV4518PW_SWITCH_RESET, "switch"); + gpio_direction_output(ARV4518PW_SWITCH_RESET, 1); + gpio_export(ARV4518PW_SWITCH_RESET, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4518PW, + "ARV4518PW", + "ARV4518PW - SMC7908A-ISP, Airties WAV-221", + arv4518pw_init); + +static void __init +arv4519pw_init(void) +{ +#define ARV4519PW_EBU 0 +#define ARV4519PW_USB 14 +#define ARV4519PW_RELAY 31 +#define ARV4519PW_SWITCH_RESET 13 +#define ARV4519PW_ATH_ADDR 0x3f0400 +#define ARV4519PW_MAC_ADDR 0x3f0016 + + arv_load_nor(0x400000); + ltq_register_gpio_ebu(ARV4519PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4519pw_gpio_leds), arv4519pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv4519pw_gpio_keys), arv4519pw_gpio_keys); + ltq_pci_data.gpio = PCI_GNT2 | PCI_REQ1; + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV4519PW_USB); + arv_register_ethernet(ARV4519PW_MAC_ADDR); + arv_register_ath5k(ARV4519PW_ATH_ADDR, ARV4519PW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_register_tapi(); + + gpio_request(ARV4519PW_RELAY, "relay"); + gpio_direction_output(ARV4519PW_RELAY, 1); + gpio_export(ARV4519PW_RELAY, 0); + + gpio_request(ARV4519PW_SWITCH_RESET, "switch"); + gpio_set_value(ARV4519PW_SWITCH_RESET, 1); + gpio_export(ARV4519PW_SWITCH_RESET, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4519PW, + "ARV4519PW", + "ARV4519PW - Vodafone, Pirelli", + arv4519pw_init); + +static void __init +arv4520pw_init(void) +{ +#define ARV4520PW_EBU 0x400 +#define ARV4520PW_USB 28 +#define ARV4520PW_SWITCH_RESET 110 +#define ARV4520PW_MAC_ADDR 0x3f0016 + + ltq_register_gpio_ebu(ARV4520PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4520pw_gpio_leds), arv4520pw_gpio_leds); + arv_load_nor(0x400000); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + arv_register_ethernet(ARV4520PW_MAC_ADDR); + ltq_register_rt2x00(NULL, (const u8 *) ltq_eth_data.mac.sa_data); + xway_register_dwc(ARV4520PW_USB); + ltq_register_tapi(); + + gpio_request(ARV4520PW_SWITCH_RESET, "switch"); + gpio_set_value(ARV4520PW_SWITCH_RESET, 1); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4520PW, + "ARV4520PW", + "ARV4520PW - Airties WAV-281, Arcor A800", + arv4520pw_init); + +static void __init +arv452Cpw_init(void) +{ +#define ARV452CPW_EBU 0x77f +#define ARV452CPW_USB 28 +#define ARV452CPW_RELAY1 31 +#define ARV452CPW_RELAY2 107 +#define ARV452CPW_SWITCH_RESET 110 +#define ARV452CPW_ATH_ADDR 0x3f0400 +#define ARV452CPW_MAC_ADDR 0x3f0016 + + ltq_register_gpio_ebu(ARV452CPW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv452cpw_gpio_leds), arv452cpw_gpio_leds); + arv_load_nor(0x400000); + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV452CPW_USB); + arv_register_ethernet(ARV452CPW_MAC_ADDR); + arv_register_ath5k(ARV452CPW_ATH_ADDR, ARV452CPW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_register_tapi(); + + gpio_request(ARV452CPW_SWITCH_RESET, "switch"); + gpio_set_value(ARV452CPW_SWITCH_RESET, 1); + gpio_export(ARV452CPW_SWITCH_RESET, 0); + + gpio_request(ARV452CPW_RELAY1, "relay1"); + gpio_direction_output(ARV452CPW_RELAY1, 1); + gpio_export(ARV452CPW_RELAY1, 0); + + gpio_request(ARV452CPW_RELAY2, "relay2"); + gpio_set_value(ARV452CPW_RELAY2, 1); + gpio_export(ARV452CPW_RELAY2, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV452CPW, + "ARV452CPW", + "ARV452CPW - Arcor A801", + arv452Cpw_init); + +static void __init +arv4525pw_init(void) +{ +#define ARV4525PW_ATH_ADDR 0x3f0400 +#define ARV4525PW_MAC_ADDR 0x3f0016 + + arv_load_nor(0x400000); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds); + gpio_request_array(arv4525pw_gpios, ARRAY_SIZE(arv4525pw_gpios)); + gpio_export(ARV4525PW_RELAY, false); + gpio_export(ARV4525PW_PHYRESET, false); + ltq_pci_data.clock = PCI_CLOCK_INT; + ltq_register_pci(<q_pci_data); + arv_register_ath5k(ARV4525PW_ATH_ADDR, ARV4525PW_MAC_ADDR); + ltq_register_ath5k(arv_ath5k_eeprom_data, arv_athxk_eeprom_mac); + ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII; + arv_register_ethernet(ARV4525PW_MAC_ADDR); + ltq_register_tapi(); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV4525PW, + "ARV4525PW", + "ARV4525PW - Speedport W502V", + arv4525pw_init); + +static void __init +arv7525pw_init(void) +{ +#define ARV7525P_MAC_ADDR 0x3f0016 + + arv_load_nor(0x400000); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv4525pw_gpio_leds), arv4525pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv7525pw_gpio_keys), arv7525pw_gpio_keys); + ltq_pci_data.clock = PCI_CLOCK_INT; + ltq_pci_data.gpio = PCI_GNT1 | PCI_EXIN1; + ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31); + ltq_register_pci(<q_pci_data); + ltq_eth_data.mii_mode = PHY_INTERFACE_MODE_MII; + ltq_register_rt2x00("RT2860.eeprom", NULL); + ltq_register_tapi(); + arv_register_ethernet(ARV7525P_MAC_ADDR); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV7525PW, + "ARV7525PW", + "ARV7525PW - Speedport W303V", + arv7525pw_init); + +static void __init +arv7518pw_init(void) +{ +#define ARV7518PW_EBU 0x2 +#define ARV7518PW_USB 14 +#define ARV7518PW_SWITCH_RESET 13 +#define ARV7518PW_ATH_ADDR 0x7f0400 +#define ARV7518PW_MAC_ADDR 0x7f0016 + + arv_load_nor(0x800000); + ltq_register_gpio_ebu(ARV7518PW_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv7518pw_gpio_leds), arv7518pw_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv7518pw_gpio_keys), arv7518pw_gpio_keys); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + xway_register_dwc(ARV7518PW_USB); + arv_register_ethernet(ARV7518PW_MAC_ADDR); + arv_register_ath9k(ARV7518PW_ATH_ADDR, ARV7518PW_MAC_ADDR); + ltq_register_ath9k(arv_ath9k_eeprom_data, arv_athxk_eeprom_mac); + ltq_pci_ath_fixup(14, arv_ath9k_eeprom_data); + ltq_register_tapi(); + + gpio_request(ARV7518PW_SWITCH_RESET, "switch"); + gpio_direction_output(ARV7518PW_SWITCH_RESET, 1); + gpio_export(ARV7518PW_SWITCH_RESET, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV7518PW, + "ARV7518PW", + "ARV7518PW - ASTORIA", + arv7518pw_init); + +static void __init +arv752dpw22_init(void) +{ +#define ARV752DPW22_EBU 0x2 +#define ARV752DPW22_USB 100 +#define ARV752DPW22_RELAY 101 +#define ARV752DPW22_MAC_ADDR 0x7f0016 + + arv_load_nor(0x800000); + ltq_register_gpio_ebu(ARV752DPW22_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys); + ltq_pci_data.irq[15] = (INT_NUM_IM3_IRL0 + 31); + ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + xway_register_dwc(ARV752DPW22_USB); + arv_register_ethernet(ARV752DPW22_MAC_ADDR); + ltq_register_tapi(); + + gpio_request(ARV752DPW22_RELAY, "relay"); + gpio_set_value(ARV752DPW22_RELAY, 1); + gpio_export(ARV752DPW22_RELAY, 0); +} + +MIPS_MACHINE(LANTIQ_MACH_ARV752DPW22, + "ARV752DPW22", + "ARV752DPW22 - Arcor A803", + arv752dpw22_init); + +static void __init +arv752dpw_init(void) +{ +#define ARV752DPW22_EBU 0x2 +#define ARV752DPW22_USB 100 +#define ARV752DPW22_RELAY 101 +#define ARV752DPW22_MAC_ADDR 0x7f0016 + + arv_load_nor(0x800000); + ltq_register_gpio_ebu(ARV752DPW22_EBU); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(arv752dpw22_gpio_leds), arv752dpw22_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(arv752dpw22_gpio_keys), arv752dpw22_gpio_keys); + ltq_pci_data.irq[14] = (INT_NUM_IM3_IRL0 + 31); + ltq_pci_data.gpio |= PCI_EXIN1 | PCI_REQ2; + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + xway_register_dwc(ARV752DPW22_USB); + ltq_register_rt2x00("RT2860.eeprom", NULL); + arv_register_ethernet(ARV752DPW22_MAC_ADDR); + gpio_request(ARV752DPW22_RELAY, "relay"); + gpio_set_value(ARV752DPW22_RELAY, 1); + gpio_export(ARV752DPW22_RELAY, 0); + +} + +MIPS_MACHINE(LANTIQ_MACH_ARV752DPW, + "ARV752DPW", + "ARV752DPW - Arcor A802", + arv752dpw_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-bthomehubv2b.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-bthomehubv2b.c new file mode 100644 index 0000000000..44fe2f4efe --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-bthomehubv2b.c @@ -0,0 +1,542 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Andrej VlaÅ¡ić + * Copyright (C) 2011 Luka Perkov + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/ath5k_platform.h> +#include <linux/ath9k_platform.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/io.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/module.h> + +#include <irq.h> +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +//#include "dev-wifi-ath9k.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +#undef USE_BTHH_GPIO_INIT + +// this reads certain data from u-boot if it's there +#define USE_UBOOT_ENV_DATA + +#define UBOOT_ENV_OFFSET 0x040000 +#define UBOOT_ENV_SIZE 0x010000 + +#ifdef NAND_ORGLAYOUT +// this is only here for reference +// definition of NAND flash area +static struct mtd_partition bthomehubv2b_nand_partitions[] = +{ + { + .name = "ART", + .offset = 0x0000000, + .size = 0x0004000, + }, + { + .name = "image1", + .offset = 0x0004000, + .size = 0x0E00000, + }, + { + .name = "unknown1", + .offset = 0x0E04000, + .size = 0x00FC000, + }, + { + .name = "image2", + .offset = 0x0F00000, + .size = 0x0E00000, + }, + { + .name = "unknown2", + .offset = 0x1D00000, + .size = 0x0300000, + }, + +}; +#endif + +#ifdef NAND_KEEPOPENRG +// this allows both firmwares to co-exist + +static struct mtd_partition bthomehubv2b_nand_partitions[] = +{ + { + .name = "art", + .offset = 0x0000000, + .size = 0x0004000, + }, + { + .name = "Image1", + .offset = 0x0004000, + .size = 0x0E00000, + }, + { + .name = "linux", + .offset = 0x0E04000, + .size = 0x11fC000, + }, + { + .name = "wholeflash", + .offset = 0x0000000, + .size = 0x2000000, + }, + +}; +#endif + +// this gives more jffs2 by overwriting openrg + +static struct mtd_partition bthomehubv2b_nand_partitions[] = +{ + { + .name = "art", + .offset = 0x0000000, + .size = 0x0004000, + }, + { + .name = "linux", + .offset = 0x0004000, + .size = 0x1ffC000, + }, + { + .name = "wholeflash", + .offset = 0x0000000, + .size = 0x2000000, + }, + +}; + +extern void __init xway_register_nand(struct mtd_partition *parts, int count); + +// end BTHH_USE_NAND + +static struct gpio_led +bthomehubv2b_gpio_leds[] __initdata = { + + { .name = "soc:orange:upgrading", .gpio = 213, }, + { .name = "soc:orange:phone", .gpio = 214, }, + { .name = "soc:blue:phone", .gpio = 215, }, + { .name = "soc:orange:wireless", .gpio = 216, }, + { .name = "soc:blue:wireless", .gpio = 217, }, + { .name = "soc:red:broadband", .gpio = 218, }, + { .name = "soc:orange:broadband", .gpio = 219, }, + { .name = "soc:blue:broadband", .gpio = 220, }, + { .name = "soc:red:power", .gpio = 221, }, + { .name = "soc:orange:power", .gpio = 222, }, + { .name = "soc:blue:power", .gpio = 223, }, +}; + +static struct gpio_keys_button +bthomehubv2b_gpio_keys[] __initdata = { + { + .desc = "restart", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 2, + .active_low = 1, + }, + { + .desc = "findhandset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 15, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 22, + .active_low = 1, + }, +}; + +// definition of NOR flash area - as per original. +static struct mtd_partition bthomehubv2b_partitions[] = +{ + { + .name = "uboot", + .offset = 0x000000, + .size = 0x040000, + }, + { + .name = "uboot_env", + .offset = UBOOT_ENV_OFFSET, + .size = UBOOT_ENV_SIZE, + }, + { + .name = "rg_conf_1", + .offset = 0x050000, + .size = 0x010000, + }, + { + .name = "rg_conf_2", + .offset = 0x060000, + .size = 0x010000, + }, + { + .name = "rg_conf_factory", + .offset = 0x070000, + .size = 0x010000, + }, +}; + + +/* nor flash */ +/* bt homehubv2b has a very small nor flash */ +/* so make it look for a small one, else we get a lot of alias chips identified - */ +/* not a bug problem, but fills the logs. */ +static struct resource bthhv2b_nor_resource = + MEM_RES("nor", LTQ_FLASH_START, 0x80000); + +static struct platform_device ltq_nor = { + .name = "ltq_nor", + .resource = &bthhv2b_nor_resource, + .num_resources = 1, +}; + +static void __init bthhv2b_register_nor(struct physmap_flash_data *data) +{ + ltq_nor.dev.platform_data = data; + platform_device_register(<q_nor); +} + +static struct physmap_flash_data bthomehubv2b_flash_data = { + .nr_parts = ARRAY_SIZE(bthomehubv2b_partitions), + .parts = bthomehubv2b_partitions, +}; + + + + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { [14] = INT_NUM_IM0_IRL0 + 22, }, +}; + + + + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + + + + +static char __init *get_uboot_env_var(char *haystack, int haystack_len, char *needle, int needle_len) { + int i; + for (i = 0; i <= haystack_len - needle_len; i++) { + if (memcmp(haystack + i, needle, needle_len) == 0) { + return haystack + i + needle_len; + } + } + return NULL; +} + +/* + * bthomehubv2b_parse_hex_* are not uniq. in arm/orion there are also duplicates: + * dns323_parse_hex_* + * TODO: one day write a patch for this :) + */ +static int __init bthomehubv2b_parse_hex_nibble(char n) { + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init bthomehubv2b_parse_hex_byte(const char *b) { + int hi; + int lo; + + hi = bthomehubv2b_parse_hex_nibble(b[0]); + lo = bthomehubv2b_parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init bthomehubv2b_register_ethernet(void) { + u_int8_t addr[6]; + int i; + char *mac = "01:02:03:04:05:06"; + int gotmac = 0; + char *boardid = "BTHHV2B"; + int gotboardid = 0; + + char *uboot_env_page; + uboot_env_page = ioremap(LTQ_FLASH_START + UBOOT_ENV_OFFSET, UBOOT_ENV_SIZE); + if (uboot_env_page) + { + char *Data = NULL; + Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0ethaddr=", 9); + if (Data) + { + mac = Data; + } + + Data = get_uboot_env_var(uboot_env_page, UBOOT_ENV_SIZE, "\0boardid=", 9); + + if (Data) + boardid = Data; + } + else + { + printk("bthomehubv2b: Failed to get uboot_env_page"); + } + + if (!mac) { + goto error_fail; + } + + if (!boardid) { + goto error_fail; + } + + /* Sanity check the string we're looking at */ + for (i = 0; i < 5; i++) { + if (*(mac + (i * 3) + 2) != ':') { + goto error_fail; + } + } + + for (i = 0; i < 6; i++) { + int byte; + byte = bthomehubv2b_parse_hex_byte(mac + (i * 3)); + if (byte < 0) { + goto error_fail; + } + addr[i] = byte; + } + + if (gotmac) + printk("bthomehubv2b: Found ethernet MAC address: "); + else + printk("bthomehubv2b: using default MAC (pls set ethaddr in u-boot): "); + + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(<q_eth_data.mac.sa_data, addr, 6); + ltq_register_etop(<q_eth_data); + + //memcpy(&bthomehubv2b_ath5k_eeprom_mac, addr, 6); + //bthomehubv2b_ath5k_eeprom_mac[5]++; + + if (gotboardid) + printk("bthomehubv2b: Board id is %s.", boardid); + else + printk("bthomehubv2b: Default Board id is %s.", boardid); + + if (strncmp(boardid, "BTHHV2B", 7) == 0) { + // read in dev-wifi-ath9k + //memcpy(&bthomehubv2b_ath5k_eeprom_data, sx763_eeprom_data, ATH5K_PLAT_EEP_MAX_WORDS); + } + else { + printk("bthomehubv2b: Board id is unknown, fix uboot_env data."); + } + + + // should not unmap while we are using the ram? + if (uboot_env_page) + iounmap(uboot_env_page); + + return 0; + +error_fail: + if (uboot_env_page) + iounmap(uboot_env_page); + return -EINVAL; +} + + +#define PORTA2_HW_PASS1 0 +#define PORTA2_HW_PASS1_SC14480 1 +#define PORTA2_HW_PASS2 2 + +int porta2_hw_revision = -1; +EXPORT_SYMBOL(porta2_hw_revision); + +#define LTQ_GPIO_OUT 0x00 +#define LTQ_GPIO_IN 0x04 +#define LTQ_GPIO_DIR 0x08 +#define LTQ_GPIO_ALTSEL0 0x0C +#define LTQ_GPIO_ALTSEL1 0x10 +#define LTQ_GPIO_OD 0x14 +#define LTQ_GPIO_PUDSEL 0x1C +#define LTQ_GPIO_PUDEN 0x20 + +#ifdef USE_BTHH_GPIO_INIT +static void bthomehubv2b_board_prom_init(void) +{ + int revision = 0; + unsigned int gpio = 0; + void __iomem *mem = ioremap(LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE*2); + +#define DANUBE_GPIO_P0_OUT (unsigned short *)(mem + LTQ_GPIO_OUT) +#define DANUBE_GPIO_P0_IN (unsigned short *)(mem + LTQ_GPIO_IN) +#define DANUBE_GPIO_P0_DIR (unsigned short *)(mem + LTQ_GPIO_DIR) +#define DANUBE_GPIO_P0_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_ALTSEL0) +#define DANUBE_GPIO_P0_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_ALTSEL1) + +#define DANUBE_GPIO_P1_OUT (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OUT) +#define DANUBE_GPIO_P1_IN (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_IN) +#define DANUBE_GPIO_P1_DIR (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_DIR) +#define DANUBE_GPIO_P1_ALTSEL0 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL0) +#define DANUBE_GPIO_P1_ALTSEL1 (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_ALTSEL1) +#define DANUBE_GPIO_P1_OD (unsigned short *)(mem + LTQ_GPIO_SIZE + LTQ_GPIO_OD) + + printk("About to sense board using GPIOs at %8.8X\n", (unsigned int)mem); + + + /* First detect HW revision of the board. For that we need to set the GPIO + * lines according to table 7.2.1/7.2.2 in HSI */ + *DANUBE_GPIO_P0_OUT = 0x0200; + *DANUBE_GPIO_P0_DIR = 0x2610; + *DANUBE_GPIO_P0_ALTSEL0 = 0x7812; + *DANUBE_GPIO_P0_ALTSEL1 = 0x0000; + + *DANUBE_GPIO_P1_OUT = 0x7008; + *DANUBE_GPIO_P1_DIR = 0xF3AE; + *DANUBE_GPIO_P1_ALTSEL0 = 0x83A7; + *DANUBE_GPIO_P1_ALTSEL1 = 0x0400; + + gpio = (*DANUBE_GPIO_P0_IN & 0xFFFF) | + ((*DANUBE_GPIO_P1_IN & 0xFFFF) << 16); + + revision |= (gpio & (1 << 27)) ? (1 << 0) : 0; + revision |= (gpio & (1 << 20)) ? (1 << 1) : 0; + revision |= (gpio & (1 << 8)) ? (1 << 2) : 0; + revision |= (gpio & (1 << 6)) ? (1 << 3) : 0; + revision |= (gpio & (1 << 5)) ? (1 << 4) : 0; + revision |= (gpio & (1 << 0)) ? (1 << 5) : 0; + + porta2_hw_revision = revision; + printk("PORTA2: detected HW revision %d\n", revision); + + /* Set GPIO lines according to HW revision. */ + /* !!! Note that we are setting SPI_CS5 (GPIO 9) to be GPIO out with value + * of HIGH since the FXO does not use the SPI CS mechanism, it does it + * manually by controlling the GPIO line. We need the CS line to be disabled + * (HIGH) until needed since it will intefere with other devices on the SPI + * bus. */ + *DANUBE_GPIO_P0_OUT = 0x0200; + /* + * During the manufacturing process a different machine takes over uart0 + * so set it as input (so it wouldn't drive the line) + */ +#define cCONFIG_SHC_BT_MFG_TEST 0 + *DANUBE_GPIO_P0_DIR = 0x2671 | (cCONFIG_SHC_BT_MFG_TEST ? 0 : (1 << 12)); + + if (revision == PORTA2_HW_PASS1_SC14480 || revision == PORTA2_HW_PASS2) + *DANUBE_GPIO_P0_ALTSEL0 = 0x7873; + else + *DANUBE_GPIO_P0_ALTSEL0 = 0x3873; + + *DANUBE_GPIO_P0_ALTSEL1 = 0x0001; + + + //################################################################################### + // Register values before patch + // P1_ALTSEL0 = 0x83A7 + // P1_ALTSEL1 = 0x0400 + // P1_OU T = 0x7008 + // P1_DIR = 0xF3AE + // P1_OD = 0xE3Fc + printk("\nApplying Patch for CPU1 IRQ Issue\n"); + *DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<12); // switch P1.12 (GPIO28) to GPIO functionality + *DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<12); // switch P1.12 (GPIO28) to GPIO functionality + *DANUBE_GPIO_P1_OUT &= ~(1<<12); // set P1.12 (GPIO28) to 0 + *DANUBE_GPIO_P1_DIR |= (1<<12); // configure P1.12 (GPIO28) as output + *DANUBE_GPIO_P1_OD |= (1<<12); // activate Push/Pull mode + udelay(100); // wait a little bit (100us) + *DANUBE_GPIO_P1_OD &= ~(1<<12); // switch back from Push/Pull to Open Drain + // important: before! setting output to 1 (3,3V) the mode must be switched + // back to Open Drain because the reset pin of the SC14488 is internally + // pulled to 1,8V + *DANUBE_GPIO_P1_OUT |= (1<<12); // set output P1.12 (GPIO28) to 1 + // Register values after patch, should be the same as before + // P1_ALTSEL0 = 0x83A7 + // P1_ALTSEL1 = 0x0400 + // P1_OUT = 0x7008 + // P1_DIR = 0xF3AE + // P1_OD = 0xE3Fc + //################################################################################### + + + *DANUBE_GPIO_P1_OUT = 0x7008; + *DANUBE_GPIO_P1_DIR = 0xEBAE | (revision == PORTA2_HW_PASS2 ? 0x1000 : 0); + *DANUBE_GPIO_P1_ALTSEL0 = 0x8BA7; + *DANUBE_GPIO_P1_ALTSEL1 = 0x0400; + + iounmap(mem); +} +#endif +static void __init bthomehubv2b_init(void) { +#define bthomehubv2b_USB 13 + + // read the board version +#ifdef USE_BTHH_GPIO_INIT + bthomehubv2b_board_prom_init(); +#endif + + // register extra GPPOs used by LEDs as GPO 0x200+ + ltq_register_gpio_stp(); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(bthomehubv2b_gpio_leds), bthomehubv2b_gpio_leds); + bthhv2b_register_nor(&bthomehubv2b_flash_data); + xway_register_nand(bthomehubv2b_nand_partitions, ARRAY_SIZE(bthomehubv2b_nand_partitions)); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(bthomehubv2b_gpio_keys), bthomehubv2b_gpio_keys); +// ltq_register_ath9k(); + xway_register_dwc(bthomehubv2b_USB); + bthomehubv2b_register_ethernet(); + +} + +MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2BOPENRG, + "BTHOMEHUBV2BOPENRG", + "BTHOMEHUBV2B - BT Homehub V2.0 Type B with OpenRG image retained", + bthomehubv2b_init); + +MIPS_MACHINE(LANTIQ_MACH_BTHOMEHUBV2B, + "BTHOMEHUBV2B", + "BTHOMEHUBV2B - BT Homehub V2.0 Type B", + bthomehubv2b_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_ar9.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_ar9.c new file mode 100644 index 0000000000..5bd6341809 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_ar9.c @@ -0,0 +1,115 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/flash.h> + +#include <lantiq_soc.h> +#include <irq.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-ifxhcd.h" +#include "dev-gpio-leds.h" +#include "dev-gpio-buttons.h" + +static struct mtd_partition fritz7320_partitions[] = { + { + .name = "urlader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0xf60000, + }, + { + .name = "tffs (1)", + .offset = 0xf80000, + .size = 0x40000, + }, + { + .name = "tffs (2)", + .offset = 0xfc0000, + .size = 0x40000, + }, +}; + +static struct physmap_flash_data fritz7320_flash_data = { + .nr_parts = ARRAY_SIZE(fritz7320_partitions), + .parts = fritz7320_partitions, +}; + +static struct gpio_led +fritz7320_gpio_leds[] __initdata = { + { .name = "soc:green:power", .gpio = 44, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:internet", .gpio = 47, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:dect", .gpio = 38, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:wlan", .gpio = 37, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:dual1", .gpio = 35, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:dual2", .gpio = 45, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_keys_button +fritz7320_gpio_keys[] __initdata = { + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 1, + .active_low = 1, + }, + { + .desc = "dect", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 2, + .active_low = 1, + }, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static int usb_pins[2] = { 50, 51 }; + +static void __init +fritz7320_init(void) +{ + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fritz7320_gpio_keys), fritz7320_gpio_keys); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz7320_gpio_leds), fritz7320_gpio_leds); + ltq_register_pci(<q_pci_data); + ltq_register_etop(<q_eth_data); + ltq_register_nor(&fritz7320_flash_data); + xway_register_hcd(usb_pins); +} + +MIPS_MACHINE(LANTIQ_MACH_FRITZ7320, + "FRITZ7320", + "FRITZ!BOX 7320", + fritz7320_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c new file mode 100644 index 0000000000..293c7b750a --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c @@ -0,0 +1,164 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/flash.h> + +#include <lantiq_soc.h> +#include <irq.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-ifxhcd.h" +#include "dev-gpio-leds.h" +#include "dev-gpio-buttons.h" + +static struct mtd_partition fritz3370_partitions[] = { + { + .name = "linux", + .offset = 0x0, + .size = 0x400000, + }, + { + .name = "filesystem", + .offset = 0x400000, + .size = 0x3000000, + }, + { + .name = "reserved-kernel", + .offset = 0x3400000, + .size = 0x400000, + }, + { + .name = "reserved", + .offset = 0x3800000, + .size = 0x3000000, + }, + { + .name = "config", + .offset = 0x6800000, + .size = 0x200000, + }, + { + .name = "nand-filesystem", + .offset = 0x6a00000, + .size = 0x1600000, + }, +}; + +static struct mtd_partition spi_flash_partitions[] = { + { + .name = "urlader", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "tffs", + .offset = 0x20000, + .size = 0x10000, + }, + { + .name = "tffs", + .offset = 0x30000, + .size = 0x10000, + }, +}; + +static struct gpio_led +fritz3370_gpio_leds[] __initdata = { + { .name = "soc:green:1", .gpio = 32, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:2", .gpio = 33, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:red:3", .gpio = 34, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:4", .gpio = 35, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:5", .gpio = 36, .active_low = 1, .default_trigger = "default-on" }, + { .name = "soc:green:6", .gpio = 47, .active_low = 1, .default_trigger = "default-on" }, +}; + +static struct gpio_keys_button +fritz3370_gpio_keys[] __initdata = { + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 29, + .active_low = 1, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static int usb_pins[2] = { 5, 14 }; + +#define SPI_GPIO_MRST 16 +#define SPI_GPIO_MTSR 17 +#define SPI_GPIO_CLK 18 +#define SPI_GPIO_CS0 10 + +static struct spi_gpio_platform_data spi_gpio_data = { + .sck = SPI_GPIO_CLK, + .mosi = SPI_GPIO_MTSR, + .miso = SPI_GPIO_MRST, + .num_chipselect = 2, +}; + +static struct platform_device spi_gpio_device = { + .name = "spi_gpio", + .dev.platform_data = &spi_gpio_data, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "SPL", + .parts = spi_flash_partitions, + .nr_parts = ARRAY_SIZE(spi_flash_partitions), +}; + +static struct spi_board_info spi_flash __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .chip_select = 0, + .controller_data = (void *) SPI_GPIO_CS0, + .platform_data = &spi_flash_data +}; + +static void __init +spi_gpio_init(void) +{ + spi_register_board_info(&spi_flash, 1); + platform_device_register(&spi_gpio_device); +} + +static void __init +fritz3370_init(void) +{ + spi_gpio_init(); + platform_device_register_simple("pcie-xway", 0, NULL, 0); + xway_register_nand(fritz3370_partitions, ARRAY_SIZE(fritz3370_partitions)); + xway_register_hcd(usb_pins); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz3370_gpio_leds), fritz3370_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fritz3370_gpio_keys), fritz3370_gpio_keys); + ltq_register_vrx200(<q_eth_data); +} + +MIPS_MACHINE(LANTIQ_MACH_FRITZ3370, + "FRITZ3370", + "FRITZ!BOX 3370", + fritz3370_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.c new file mode 100644 index 0000000000..af27825cbb --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.c @@ -0,0 +1,168 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Andrej VlaÅ¡ić + * Copyright (C) 2011 Luka Perkov + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/io.h> +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/string.h> + +#include <irq.h> +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "dev-wifi-athxk.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +#include "mach-gigasx76x.h" + +static u8 ltq_ethaddr[6] = { 0 }; + +static int __init +setup_ethaddr(char *str) +{ + if (!mac_pton(str, ltq_ethaddr)) + memset(ltq_ethaddr, 0, 6); + return 0; +} +__setup("ethaddr=", setup_ethaddr); + + +enum { + UNKNOWN = 0, + SX761, + SX762, + SX763, +}; +static u8 board __initdata = SX763; + +static int __init +setup_board(char *str) +{ + if (!strcmp(str, "sx761")) + board = SX761; + else if (!strcmp(str, "sx762")) + board = SX762; + else if (!strcmp(str, "sx763")) + board = SX763; + else + board = UNKNOWN; + return 0; +} +__setup("board=", setup_board); + +static struct mtd_partition gigasx76x_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x10000, + }, + { + .name = "uboot_env", + .offset = 0x10000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0x7e0000, + }, +}; + +static struct gpio_led +gigasx76x_gpio_leds[] __initdata = { + { .name = "soc:green:voip", .gpio = 216, }, + { .name = "soc:green:adsl", .gpio = 217, }, + { .name = "soc:green:usb", .gpio = 218, }, + { .name = "soc:green:wifi", .gpio = 219, }, + { .name = "soc:green:phone2", .gpio = 220, }, + { .name = "soc:green:phone1", .gpio = 221, }, + { .name = "soc:green:line", .gpio = 222, }, + { .name = "soc:green:online", .gpio = 223, }, +}; + +static struct gpio_keys_button +gigasx76x_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 22, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 14, + .active_low = 0, + }, +}; + +static struct physmap_flash_data gigasx76x_flash_data = { + .nr_parts = ARRAY_SIZE(gigasx76x_partitions), + .parts = gigasx76x_partitions, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { [14] = INT_NUM_IM0_IRL0 + 22, }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + +static void __init +gigasx76x_init(void) +{ +#define GIGASX76X_USB 29 + + ltq_register_gpio_stp(); + ltq_register_nor(&gigasx76x_flash_data); + ltq_register_pci(<q_pci_data); + ltq_register_tapi(); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys); + xway_register_dwc(GIGASX76X_USB); + + if (!is_valid_ether_addr(ltq_ethaddr)) + random_ether_addr(ltq_ethaddr); + + memcpy(<q_eth_data.mac.sa_data, ltq_ethaddr, 6); + ltq_register_etop(<q_eth_data); + if (board == SX762) + ltq_register_ath5k(sx762_eeprom_data, ltq_ethaddr); + else + ltq_register_ath5k(sx763_eeprom_data, ltq_ethaddr); +} + +MIPS_MACHINE(LANTIQ_MACH_GIGASX76X, + "GIGASX76X", + "GIGASX76X - Gigaset SX761,SX762,SX763", + gigasx76x_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.h new file mode 100644 index 0000000000..74e5ba28fe --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-gigasx76x.h @@ -0,0 +1,210 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 Andrej VlaÅ¡ić + * Copyright (C) 2011 Luka Perkov + * + */ + +#ifndef _MACH_GIGASX76X_H__ +#define _MACH_GIGASX76X_H__ + +#include <linux/ath5k_platform.h> + +static u16 sx763_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS] = +{ +0x0013,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100, +0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943, +0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5, +0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101, +0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73, +0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030, +0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e, +0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80, +0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8, +0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc, +0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604, +0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0x0037,0x971f,0x5003,0x9a66,0x0001,0x81c4,0x016a, +0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00, +0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000, +0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35, +0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07be,0x6201, +0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112, +0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931, +0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8140,0x724b,0x2ba9,0x3a09, +0x99d9,0x1949,0x0070,0x0000,0x80e0,0x624a,0x2af8,0x35c7,0x9d47,0x1938,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x7082,0x0820,0xb882,0x0820,0x7092,0x28a0,0x8992, +0x28a0,0xa292,0x28a0,0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000, +0x70a2,0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000, +0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2464,0x2424, +0x2400,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2464,0x2424,0x0000,0x0000,0x7075, +0xa7ac,0x0000,0x0000,0x2464,0x6424,0x0000,0x0000,0x7075,0xa7ac,0x0000,0x0000, +0x2464,0x6424,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2424,0x0000,0x0000, +0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff}; + +static u16 sx762_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS] = +{ +0x001a,0x168c,0x0200,0x0001,0x0000,0x5001,0x0000,0x2051,0x2051,0x1c0a,0x0100, +0x0000,0x01c2,0x0002,0xc606,0x0001,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0xf165,0x7fbe,0x0003,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x5aa5,0x0000,0x0000,0x0313,0x4943, +0x2053,0x7104,0x1202,0x0400,0x0306,0x0001,0x0000,0x0500,0x410e,0x39b1,0x1eb5, +0x4e2d,0x3056,0xffff,0xe902,0x0700,0x0106,0x0000,0x0100,0x1500,0x0752,0x4101, +0x6874,0x7265,0x736f,0x4320,0x6d6f,0x756d,0x696e,0x6163,0x6974,0x6e6f,0x2c73, +0x4920,0x636e,0x002e,0x5241,0x3035,0x3130,0x302d,0x3030,0x2d30,0x3030,0x3030, +0x5700,0x7269,0x6c65,0x7365,0x2073,0x414c,0x204e,0x6552,0x6566,0x6572,0x636e, +0x2065,0x6143,0x6472,0x3000,0x0030,0x00ff,0x2100,0x0602,0x2201,0x0205,0x8d80, +0x005b,0x0522,0x4002,0x8954,0x2200,0x0205,0x1b00,0x00b7,0x0522,0x8002,0x12a8, +0x2201,0x0205,0x3600,0x016e,0x0522,0x0002,0x2551,0x2202,0x0205,0x6c00,0x02dc, +0x0522,0x8002,0x37f9,0x2203,0x0205,0xa200,0x044a,0x0222,0x0803,0x0822,0x0604, +0x0300,0xbe7f,0x65f1,0x0222,0x0105,0x00ff,0x0000,0x0000,0x0000,0x0000,0x0000, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0x0037,0x6aaa,0x5003,0x9a66,0x0001,0x81c4,0x016a, +0x02ff,0x84ff,0x15a3,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x2d2c,0x0000,0x0000,0x0000,0x0000,0xe028,0xa492,0x1c00, +0x000e,0xb8ca,0x0013,0x0000,0x0000,0x6b4b,0xc059,0x1571,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x2370,0x00a5,0x9618,0x419a,0x68a2,0xda35,0x001c,0x0007,0xb0ff,0x01b5,0x0000, +0x0000,0xff70,0x19ff,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x3170,0x00a5,0x9618,0x419a,0x68a2,0xda35, +0x001c,0x000e,0xb0ff,0x21b5,0x0000,0x2fd8,0xff70,0x1226,0x19ff,0x07fa,0x6201, +0x032e,0x0587,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x1112, +0x1441,0x4231,0x3234,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x8000,0x0000,0x0000,0x0000,0x0000,0x8000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x4d31,0x7f54,0x3c93,0x1205,0x1931, +0x492d,0x7f50,0x3c93,0x0e01,0x192d,0x0070,0x0000,0x8180,0x724d,0xab59,0x3a08, +0xdd79,0x2559,0x0070,0x0000,0x81a0,0x6e4d,0x2b99,0x3a09,0x9989,0x2157,0x0000, +0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000, +0x0000,0x0000,0x0000,0x0000,0x7092,0x4924,0xb892,0x4924,0x7092,0x289e,0x8992, +0x289e,0xa292,0x289e,0x70a2,0xa7ac,0x0000,0x0000,0x2462,0x5e13,0x0000,0x0000, +0x70a2,0xa7ac,0x0000,0x0000,0x1e5c,0x5713,0x0000,0x0000,0x8989,0x0000,0x0000, +0x0000,0x2424,0x0000,0x0000,0x0000,0x7075,0xa2ac,0xb800,0x0000,0x2868,0x2828, +0x2800,0x0000,0x7075,0xa2ac,0x0000,0x0000,0x2868,0x2828,0x0000,0x0000,0x7075, +0xac00,0x0000,0x0000,0x2161,0x2100,0x0000,0x0000,0x7075,0xac00,0x0000,0x0000, +0x1b5b,0x1b00,0x0000,0x0000,0x8989,0x0000,0x0000,0x0000,0x2121,0x0000,0x0000, +0x0000,0x0000,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff, +0xffff,0xffff}; + +#endif diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-h201l.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-h201l.c new file mode 100644 index 0000000000..86101f5888 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-h201l.c @@ -0,0 +1,100 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 Luka Perkov <openwrt@lukaperkov.net> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/string.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +static u8 ltq_ethaddr[6] = { 0 }; + +static int __init +setup_ethaddr(char *str) +{ + if (!mac_pton(str, ltq_ethaddr)) + memset(ltq_ethaddr, 0, 6); + return 0; +} +__setup("ethaddr=", setup_ethaddr); + +static struct mtd_partition h201l_partitions[] __initdata = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "uboot_env", + .offset = 0x20000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x30000, + .size = 0x7d0000, + }, +}; + +static struct physmap_flash_data h201l_flash_data __initdata = { + .nr_parts = ARRAY_SIZE(h201l_partitions), + .parts = h201l_partitions, +}; + +static struct gpio_led +h201l_leds_gpio[] __initdata = { +}; + +static struct gpio_keys_button +h201l_gpio_keys[] __initdata = { +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static void __init +h201l_init(void) +{ + ltq_register_gpio_stp(); + ltq_register_nor(&h201l_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(h201l_leds_gpio), h201l_leds_gpio); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(h201l_gpio_keys), h201l_gpio_keys); + + if (!is_valid_ether_addr(ltq_ethaddr)) + random_ether_addr(ltq_ethaddr); + + memcpy(<q_eth_data.mac.sa_data, ltq_ethaddr, 6); + ltq_register_etop(<q_eth_data); + + xway_register_dwc(-1); +} + +MIPS_MACHINE(LANTIQ_MACH_H201L, + "H201L", + "ZTE ZXV10 H201L", + h201l_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c new file mode 100644 index 0000000000..29b0728102 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-netgear.c @@ -0,0 +1,239 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2012 Pieter Voorthuijsen <p.voorthuijsen@gmail.com> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi_gpio.h> +#include <linux/ath9k_platform.h> +#include <linux/if_ether.h> +#include <linux/etherdevice.h> +#include <linux/kobject.h> +#include <linux/sysfs.h> + +#include <lantiq_soc.h> +#include <irq.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> +#include "dev-wifi-athxk.h" + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" +#include "pci-ath-fixup.h" +#include <mtd/mtd-abi.h> +#include <asm-generic/sizes.h> + +static struct mtd_partition dgn3500_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x10000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "environment", + .offset = 0x10000, + .size = 0x10000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "calibration", + .offset = 0x20000, + .size = 0x10000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "linux", + .offset = 0x50000, + .size = 0xfa0000, + }, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + +static struct gpio_led +dgn3500_gpio_leds[] __initdata = { + { .name = "soc:green:power", .gpio = 34, .active_low = 1, }, + { .name = "soc:red:power", .gpio = 39, .active_low = 1, }, + { .name = "soc:orange:wlan", .gpio = 51, .active_low = 1, }, + { .name = "soc:green:wps", .gpio = 52, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 22, .active_low = 1, }, + { .name = "soc:green:dsl", .gpio = 4, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 2, .active_low = 1, }, +}; + +static struct gpio_keys_button +dgn3500_gpio_keys[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 54, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 36, + .active_low = 1, + }, +}; + +#define SPI_GPIO_MRST 16 +#define SPI_GPIO_MTSR 17 +#define SPI_GPIO_CLK 18 +#define SPI_GPIO_CS0 10 + +static struct spi_gpio_platform_data spi_gpio_data = { + .sck = SPI_GPIO_CLK, + .mosi = SPI_GPIO_MTSR, + .miso = SPI_GPIO_MRST, + .num_chipselect = 2, +}; + +static struct platform_device spi_gpio_device = { + .name = "spi_gpio", + .dev.platform_data = &spi_gpio_data, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "sflash", + .parts = dgn3500_partitions, + .nr_parts = ARRAY_SIZE(dgn3500_partitions), +}; + +static struct spi_board_info spi_flash __initdata = { + .modalias = "m25p80", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 10 * 1000 * 1000, + .mode = SPI_MODE_3, + .chip_select = 0, + .controller_data = (void *) SPI_GPIO_CS0, + .platform_data = &spi_flash_data +}; + +static u8 ltq_ethaddr[6] = { 0 }; + +static int __init setup_ethaddr(char *str) +{ + if (!mac_pton(str, ltq_ethaddr)) + memset(ltq_ethaddr, 0, 6); + return 0; +} +__setup("ethaddr=", setup_ethaddr); + +static u16 dgn3500_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS] = {0}; + +static ssize_t ath_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t offset, size_t count) +{ + if (unlikely(offset >= sizeof(dgn3500_eeprom_data))) + return 0; + if ((offset + count) > sizeof(dgn3500_eeprom_data)) + count = sizeof(dgn3500_eeprom_data) - offset; + if (unlikely(!count)) + return count; + + memcpy(buf, (char *)(dgn3500_eeprom_data) + offset, count); + + return count; +} + +extern struct ath9k_platform_data ath9k_pdata; + +static ssize_t ath_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t offset, size_t count) +{ + int i; + char *eeprom_bytes = (char *)dgn3500_eeprom_data; + + if (unlikely(offset >= sizeof(dgn3500_eeprom_data))) + return -EFBIG; + if ((offset + count) > sizeof(dgn3500_eeprom_data)) + count = sizeof(dgn3500_eeprom_data) - offset; + if (unlikely(!count)) + return count; + if (count % 2) + return 0; + + /* The PCI fixup routine requires an endian swap of the calibartion data + * stored in flash */ + for (i = 0; i < count; i += 2) { + eeprom_bytes[offset + i + 1] = buf[i]; + eeprom_bytes[offset + i] = buf[i+1]; + } + + /* The original data does not contain a checksum. Set the country and + * calculate new checksum when all data is received */ + if ((count + offset) == sizeof(dgn3500_eeprom_data)) + memcpy(ath9k_pdata.eeprom_data, dgn3500_eeprom_data, + sizeof(ath9k_pdata.eeprom_data)); + + return count; +} + +static struct bin_attribute dev_attr_ath_eeprom = { + .attr = { + .name = "ath_eeprom", + .mode = S_IRUGO|S_IWUSR, + }, + .read = ath_eeprom_read, + .write = ath_eeprom_write, +}; + +static void __init dgn3500_init(void) +{ + if (sysfs_create_bin_file(firmware_kobj, &dev_attr_ath_eeprom)) + printk(KERN_INFO "Failed to create ath eeprom sysfs entry\n"); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(dgn3500_gpio_leds), + dgn3500_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dgn3500_gpio_keys), dgn3500_gpio_keys); + platform_device_register(&spi_gpio_device); + ltq_register_pci(<q_pci_data); + spi_register_board_info(&spi_flash, 1); + if (!is_valid_ether_addr(ltq_ethaddr)) { + printk(KERN_INFO "MAC invalid using random\n"); + random_ether_addr(ltq_ethaddr); + } + memcpy(<q_eth_data.mac.sa_data, ltq_ethaddr, 6); + ltq_register_etop(<q_eth_data); + ltq_register_ath9k(dgn3500_eeprom_data, ltq_ethaddr); + ltq_pci_ath_fixup(14, dgn3500_eeprom_data); + /* The usb power is always enabled, protected by a fuse */ + xway_register_dwc(-1); +} + +MIPS_MACHINE(LANTIQ_MACH_DGN3500B, + "DGN3500B", + "Netgear DGN3500B", + dgn3500_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-p2601hnfx.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-p2601hnfx.c new file mode 100644 index 0000000000..247dfb572c --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-p2601hnfx.c @@ -0,0 +1,113 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/etherdevice.h> +#include <linux/mdio-gpio.h> +#include <linux/kernel.h> +#include <linux/delay.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +static struct mtd_partition p2601hnfx_partitions[] __initdata = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x20000, + }, + { + .name = "uboot_env", + .offset = 0x20000, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x40000, + .size = 0xfc0000, + }, +}; + +static struct physmap_flash_data p2601hnfx_flash_data __initdata = { + .nr_parts = ARRAY_SIZE(p2601hnfx_partitions), + .parts = p2601hnfx_partitions, +}; + +static struct gpio_led +p2601hnfx_leds_gpio[] __initdata = { + { .name = "soc:yellow:phone", .gpio = 216, .active_low = 1 }, + { .name = "soc:green:phone", .gpio = 217, .active_low = 1 }, + { .name = "soc:yellow:wifi", .gpio = 218, .active_low = 1 }, + { .name = "soc:green:power", .gpio = 219, .active_low = 1 }, + { .name = "soc:red:internet", .gpio = 220, .active_low = 1 }, + { .name = "soc:green:internet", .gpio = 221, .active_low = 1 }, + { .name = "soc:green:dsl", .gpio = 222, .active_low = 1 }, + { .name = "soc:green:wifi", .gpio = 223, .active_low = 1 }, +}; + +static struct gpio_keys_button +p2601hnfx_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 53, + .active_low = 1, + }, + { + .desc = "wifi", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 54, + .active_low = 1, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RMII, +}; + +static void __init +p2601hnfx_init(void) +{ +#define P2601HNFX_USB 9 + + ltq_register_gpio_stp(); + ltq_register_nor(&p2601hnfx_flash_data); + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(p2601hnfx_leds_gpio), p2601hnfx_leds_gpio); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(p2601hnfx_gpio_keys), p2601hnfx_gpio_keys); + ltq_register_etop(<q_eth_data); + xway_register_dwc(P2601HNFX_USB); + + // enable the ethernet ports on the SoC +// ltq_w32((ltq_r32(LTQ_GPORT_P0_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P0_CTL); +// ltq_w32((ltq_r32(LTQ_GPORT_P1_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P1_CTL); +// ltq_w32((ltq_r32(LTQ_GPORT_P2_CTL) & ~(1 << 17)) | (1 << 18), LTQ_GPORT_P2_CTL); +} + +MIPS_MACHINE(LANTIQ_MACH_P2601HNFX, + "P2601HNFX", + "ZyXEL P-2601HN-Fx", + p2601hnfx_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-wbmr.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-wbmr.c new file mode 100644 index 0000000000..a57e092123 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-wbmr.c @@ -0,0 +1,120 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/gpio_buttons.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> + +#include <lantiq_soc.h> +#include <irq.h> +#include <dev-gpio-leds.h> +#include <dev-gpio-buttons.h> + +#include "../machtypes.h" +#include "devices.h" +#include "dev-dwc_otg.h" + +static struct mtd_partition wbmr_partitions[] = +{ + { + .name = "uboot", + .offset = 0x0, + .size = 0x40000, + }, + { + .name = "uboot-env", + .offset = 0x40000, + .size = 0x20000, + }, + { + .name = "linux", + .offset = 0x60000, + .size = 0x1f20000, + }, + { + .name = "calibration", + .offset = 0x1fe0000, + .size = 0x20000, + }, +}; + +static struct physmap_flash_data wbmr_flash_data = { + .nr_parts = ARRAY_SIZE(wbmr_partitions), + .parts = wbmr_partitions, +}; + +static struct gpio_led +wbmr_gpio_leds[] __initdata = { + { .name = "soc:blue:movie", .gpio = 20, .active_low = 1, }, + { .name = "soc:red:internet", .gpio = 18, .active_low = 1, }, + { .name = "soc:green:internet", .gpio = 17, .active_low = 1, }, + { .name = "soc:green:adsl", .gpio = 16, .active_low = 1, }, + { .name = "soc:green:wlan", .gpio = 15, .active_low = 1, }, + { .name = "soc:red:security", .gpio = 14, .active_low = 1, }, + { .name = "soc:green:power", .gpio = 1, .active_low = 1, }, + { .name = "soc:red:power", .gpio = 5, .active_low = 1, }, + { .name = "soc:green:usb", .gpio = 28, .active_low = 1, }, +}; + +static struct gpio_keys_button +wbmr_gpio_keys[] __initdata = { + { + .desc = "aoss", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 0, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL, + .gpio = 37, + .active_low = 1, + }, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_RGMII, +}; + +static void __init +wbmr_init(void) +{ +#define WMBR_BRN_MAC 0x1fd0024 + + ltq_add_device_gpio_leds(-1, ARRAY_SIZE(wbmr_gpio_leds), wbmr_gpio_leds); + ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(wbmr_gpio_keys), wbmr_gpio_keys); + ltq_register_nor(&wbmr_flash_data); + ltq_register_pci(<q_pci_data); + memcpy_fromio(<q_eth_data.mac.sa_data, + (void *)KSEG1ADDR(LTQ_FLASH_START + WMBR_BRN_MAC), 6); + ltq_register_etop(<q_eth_data); + xway_register_dwc(36); +} + +MIPS_MACHINE(LANTIQ_MACH_WBMR, + "WBMR", + "WBMR", + wbmr_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/nand.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/nand.c new file mode 100644 index 0000000000..9ab91d8819 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/nand.c @@ -0,0 +1,216 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#include "devices.h" + +/* nand registers */ +#define LTQ_EBU_NAND_WAIT 0xB4 +#define LTQ_EBU_NAND_ECC0 0xB8 +#define LTQ_EBU_NAND_ECC_AC 0xBC +#define LTQ_EBU_NAND_CON 0xB0 +#define LTQ_EBU_ADDSEL1 0x24 + +/* gpio definitions */ +#define PIN_ALE 13 +#define PIN_CLE 24 +#define PIN_CS1 23 +#define PIN_RDY 48 /* NFLASH_READY */ +#define PIN_RD 49 /* NFLASH_READ_N */ + +#define NAND_CMD_ALE (1 << 2) +#define NAND_CMD_CLE (1 << 3) +#define NAND_CMD_CS (1 << 4) +#define NAND_WRITE_CMD_RESET 0xff +#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE) +#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE) +#define NAND_WRITE_DATA (NAND_CMD_CS) +#define NAND_READ_DATA (NAND_CMD_CS) +#define NAND_WAIT_WR_C (1 << 3) +#define NAND_WAIT_RD (0x1) + +#define ADDSEL1_MASK(x) (x << 4) +#define ADDSEL1_REGEN 1 +#define BUSCON1_SETUP (1 << 22) +#define BUSCON1_BCGEN_RES (0x3 << 12) +#define BUSCON1_WAITWRC2 (2 << 8) +#define BUSCON1_WAITRDC2 (2 << 6) +#define BUSCON1_HOLDC1 (1 << 4) +#define BUSCON1_RECOVC1 (1 << 2) +#define BUSCON1_CMULT4 1 +#define NAND_CON_NANDM 1 +#define NAND_CON_CSMUX (1 << 1) +#define NAND_CON_CS_P (1 << 4) +#define NAND_CON_SE_P (1 << 5) +#define NAND_CON_WP_P (1 << 6) +#define NAND_CON_PRE_P (1 << 7) +#define NAND_CON_IN_CS0 0 +#define NAND_CON_OUT_CS0 0 +#define NAND_CON_IN_CS1 (1 << 8) +#define NAND_CON_OUT_CS1 (1 << 10) +#define NAND_CON_CE (1 << 20) + +#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000) + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static void xway_select_chip(struct mtd_info *mtd, int chip) +{ + switch (chip) { + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON); + break; + case 0: + ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON); + /* reset the nand chip */ + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + ltq_w32(NAND_WRITE_CMD_RESET, + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD))); + break; + default: + BUG(); + } +} + +static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + this->IO_ADDR_W = (void __iomem *) + (NAND_BASE_ADDRESS | NAND_WRITE_CMD); + else if (ctrl & NAND_ALE) + this->IO_ADDR_W = (void __iomem *) + (NAND_BASE_ADDRESS | NAND_WRITE_ADDR); + } + + if (data != NAND_CMD_NONE) { + *(volatile u8*) ((u32) this->IO_ADDR_W) = data; + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + } +} + +static int xway_dev_ready(struct mtd_info *mtd) +{ + return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD; +} + +void nand_write(unsigned int addr, unsigned int val) +{ + ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr))); + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; +} + +unsigned char xway_read_byte(struct mtd_info *mtd) +{ + return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA))); +} + +static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + { + unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA))); + buf[i] = res8; + } +} + +static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + { + ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA)))); + while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0); + } +} + +int xway_probe(struct platform_device *pdev) +{ + /* might need this later ? + ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1"); + */ + ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE"); + ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE"); + if (ltq_is_ar9() || ltq_is_vr9()) { + ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY"); + ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD"); + } + + ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1); + + ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2 + | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1 + | BUSCON1_CMULT4, LTQ_EBU_BUSCON1); + + ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P + | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P + | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON); + + ltq_w32(NAND_WRITE_CMD_RESET, + ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD))); + while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + + return 0; +} + +static struct platform_nand_data falcon_flash_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = xway_probe, + .cmd_ctrl = xway_cmd_ctrl, + .dev_ready = xway_dev_ready, + .select_chip = xway_select_chip, + .read_byte = xway_read_byte, + .read_buf = xway_read_buf, + .write_buf = xway_write_buf, + } +}; + +static struct resource ltq_nand_res = + MEM_RES("nand", 0x14000000, 0x7ffffff); + +static struct platform_device ltq_flash_nand = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = <q_nand_res, + .dev = { + .platform_data = &falcon_flash_nand_data, + }, +}; + +void __init xway_register_nand(struct mtd_partition *parts, int count) +{ + falcon_flash_nand_data.chip.partitions = parts; + falcon_flash_nand_data.chip.nr_partitions = count; + platform_device_register(<q_flash_nand); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.c new file mode 100644 index 0000000000..c87ffb2091 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.c @@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <lantiq_soc.h> + +#define LTQ_PCI_MEM_BASE 0x18000000 + +struct ath_fixup { + u16 *cal_data; + unsigned slot; +}; + +static int ath_num_fixups; +static struct ath_fixup ath_fixups[2]; + +static void ath_pci_fixup(struct pci_dev *dev) +{ + void __iomem *mem; + u16 *cal_data = NULL; + u16 cmd; + u32 bar0; + u32 val; + unsigned i; + + for (i = 0; i < ath_num_fixups; i++) { + if (ath_fixups[i].cal_data == NULL) + continue; + + if (ath_fixups[i].slot != PCI_SLOT(dev->devfn)) + continue; + + cal_data = ath_fixups[i].cal_data; + break; + } + + if (cal_data == NULL) + return; + + if (*cal_data != 0xa55a) { + pr_err("pci %s: invalid calibration data\n", pci_name(dev)); + return; + } + + pr_info("pci %s: fixup device configuration\n", pci_name(dev)); + + mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000); + if (!mem) { + pr_err("pci %s: ioremap error\n", pci_name(dev)); + return; + } + + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* set pointer to first reg address */ + cal_data += 3; + while (*cal_data != 0xffff) { + u32 reg; + reg = *cal_data++; + val = *cal_data++; + val |= (*cal_data++) << 16; + + ltq_w32(swab32(val), mem + reg); + udelay(100); + } + + pci_read_config_dword(dev, PCI_VENDOR_ID, &val); + dev->vendor = val & 0xffff; + dev->device = (val >> 16) & 0xffff; + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); + dev->revision = val & 0xff; + dev->class = val >> 8; /* upper 3 bytes */ + + pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", + pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class); + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); + + iounmap(mem); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup); + +void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) +{ + if (ath_num_fixups >= ARRAY_SIZE(ath_fixups)) + return; + + ath_fixups[ath_num_fixups].slot = slot; + ath_fixups[ath_num_fixups].cal_data = cal_data; + ath_num_fixups++; +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.h b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.h new file mode 100644 index 0000000000..095d2619ce --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/pci-ath-fixup.h @@ -0,0 +1,6 @@ +#ifndef _PCI_ATH_FIXUP +#define _PCI_ATH_FIXUP + +void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init; + +#endif /* _PCI_ATH_FIXUP */ diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/prom.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/prom.c new file mode 100644 index 0000000000..f776d5a914 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/prom.c @@ -0,0 +1,110 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/export.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "devices.h" + +#define SOC_DANUBE "Danube" +#define SOC_TWINPASS "Twinpass" +#define SOC_AMAZON_SE "Amazon_SE" +#define SOC_AR9 "AR9" +#define SOC_GR9 "GR9" +#define SOC_VR9 "VR9" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + sprintf(i->rev_type, "1.%d", i->rev); + switch (i->partnum) { + case SOC_ID_DANUBE1: + case SOC_ID_DANUBE2: + i->name = SOC_DANUBE; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_TWINPASS: + i->name = SOC_TWINPASS; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_ARX188: + case SOC_ID_ARX168_1: + case SOC_ID_ARX168_2: + case SOC_ID_ARX182: + i->name = SOC_AR9; + i->type = SOC_TYPE_AR9; + break; + + case SOC_ID_GRX188: + case SOC_ID_GRX168: + i->name = SOC_GR9; + i->type = SOC_TYPE_AR9; + break; + + case SOC_ID_AMAZON_SE_1: + case SOC_ID_AMAZON_SE_2: + i->name = SOC_AMAZON_SE; + i->type = SOC_TYPE_AMAZON_SE; +#ifdef CONFIG_PCI + panic("ase is only supported for non pci kernels"); +#endif + break; + + case SOC_ID_VRX282: + case SOC_ID_VRX268: + case SOC_ID_VRX288: + i->name = SOC_VR9; + i->type = SOC_TYPE_VR9_1; + break; + + case SOC_ID_GRX268: + case SOC_ID_GRX288: + i->name = SOC_GR9; + i->type = SOC_TYPE_VR9_1; + break; + + case SOC_ID_VRX268_2: + case SOC_ID_VRX288_2: + i->name = SOC_VR9; + i->type = SOC_TYPE_VR9_2; + break; + + case SOC_ID_GRX282_2: + case SOC_ID_GRX288_2: + i->name = SOC_GR9; + i->type = SOC_TYPE_VR9_2; + + default: + unreachable(); + break; + } +} + +void __init ltq_soc_setup(void) +{ + if (ltq_is_ase()) + ltq_register_ase_asc(); + else + ltq_register_asc(1); + ltq_register_gpio(); + ltq_register_wdt(); +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/sysctrl.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/sysctrl.c new file mode 100644 index 0000000000..de4ce8f1cb --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/sysctrl.c @@ -0,0 +1,283 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/clkdev.h> + +#include <lantiq_soc.h> + +#include "../clk.h" +#include "../devices.h" + +/* clock control register */ +#define CGU_IFCCR 0x0018 +/* system clock register */ +#define CGU_SYS 0x0010 +/* pci control register */ +#define CGU_PCICR 0x0034 +/* ephy configuration register */ +#define CGU_EPHY 0x10 +/* power control register */ +#define PMU_PWDCR 0x1C +/* power status register */ +#define PMU_PWDSR 0x20 +/* power control register */ +#define PMU_PWDCR1 0x24 +/* power status register */ +#define PMU_PWDSR1 0x28 +/* power control register */ +#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR)) +/* power status register */ +#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR)) + +/* PMU - power management unit */ +#define PMU_USB0_P BIT(0) +#define PMU_PCI BIT(4) +#define PMU_DMA BIT(5) +#define PMU_USB0 BIT(6) +#define PMU_EPHY BIT(7) /* ase */ +#define PMU_SPI BIT(8) +#define PMU_DFE BIT(9) +#define PMU_EBU BIT(10) +#define PMU_STP BIT(11) +#define PMU_GPT BIT(12) +#define PMU_PPE BIT(13) +#define PMU_AHBS BIT(13) /* vr9 */ +#define PMU_FPI BIT(14) +#define PMU_AHBM BIT(15) +#define PMU_PPE_QSB BIT(18) +#define PMU_PPE_SLL01 BIT(19) +#define PMU_PPE_TC BIT(21) +#define PMU_PPE_EMA BIT(22) +#define PMU_PPE_DPLUM BIT(23) +#define PMU_PPE_DPLUS BIT(24) +#define PMU_USB1_P BIT(26) +#define PMU_USB1 BIT(27) +#define PMU_SWITCH BIT(28) +#define PMU_PPE_TOP BIT(29) +#define PMU_GPHY BIT(30) +#define PMU_PCIE_CLK BIT(31) + +#define PMU1_PCIE_PHY BIT(0) +#define PMU1_PCIE_CTL BIT(1) +#define PMU1_PCIE_PDI BIT(4) +#define PMU1_PCIE_MSI BIT(5) + +#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y)) +#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x)) + +static struct resource ltq_cgu_resource = + MEM_RES("cgu", LTQ_CGU_BASE_ADDR, LTQ_CGU_SIZE); + +static struct resource ltq_pmu_resource = + MEM_RES("pmu", LTQ_PMU_BASE_ADDR, LTQ_PMU_SIZE); + +static struct resource ltq_ebu_resource = + MEM_RES("ebu", LTQ_EBU_BASE_ADDR, LTQ_EBU_SIZE); + +void __iomem *ltq_cgu_membase; +void __iomem *ltq_ebu_membase; +static void __iomem *ltq_pmu_membase; + +static int ltq_cgu_enable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR); + return 0; +} + +static void ltq_cgu_disable(struct clk *clk) +{ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR); +} + +static int ltq_pmu_enable(struct clk *clk) +{ + int err = 1000000; + + ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) & ~clk->bits, + PWDCR(clk->module)); + do {} while (--err && (ltq_pmu_r32(PWDSR(clk->module)) & clk->bits)); + + if (!err) + panic("activating PMU module failed!\n"); + + return 0; +} + +static void ltq_pmu_disable(struct clk *clk) +{ + ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) | clk->bits, + PWDCR(clk->module)); +} + +static int ltq_pci_enable(struct clk *clk) +{ + unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR); + /* set clock bus speed */ + if (ltq_is_ar9()) { + ifccr &= ~0x1f00000; + if (clk->rate == CLOCK_33M) + ifccr |= 0xe00000; + else + ifccr |= 0x700000; /* 62.5M */ + } else { + ifccr &= ~0xf00000; + if (clk->rate == CLOCK_33M) + ifccr |= 0x800000; + else + ifccr |= 0x400000; /* 62.5M */ + } + ltq_cgu_w32(ifccr, CGU_IFCCR); + return 0; +} + +static int ltq_pci_ext_enable(struct clk *clk) +{ + /* enable external pci clock */ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16), + CGU_IFCCR); + ltq_cgu_w32((1 << 30), CGU_PCICR); + return 0; +} + +static void ltq_pci_ext_disable(struct clk *clk) +{ + /* disable external pci clock (internal) */ + ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16), + CGU_IFCCR); + ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR); +} + +/* manage the clock gates via PMU */ +static inline void clkdev_add_pmu(const char *dev, const char *con, + unsigned int module, unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = ltq_pmu_enable; + clk->disable = ltq_pmu_disable; + clk->module = module; + clk->bits = bits; + clkdev_add(&clk->cl); +} + +/* manage the clock generator */ +static inline void clkdev_add_cgu(const char *dev, const char *con, + unsigned int bits) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + + clk->cl.dev_id = dev; + clk->cl.con_id = con; + clk->cl.clk = clk; + clk->enable = ltq_cgu_enable; + clk->disable = ltq_cgu_disable; + clk->bits = bits; + clkdev_add(&clk->cl); +} + +/* pci needs its own enable function */ +static inline void clkdev_add_pci(void) +{ + struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); + struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL); + + /* main pci clock */ + clk->cl.dev_id = "ltq_pci"; + clk->cl.con_id = NULL; + clk->cl.clk = clk; + clk->rate = CLOCK_33M; + clk->enable = ltq_pci_enable; + clk->disable = ltq_pmu_disable; + clk->module = 0; + clk->bits = PMU_PCI; + clkdev_add(&clk->cl); + + /* use internal/external bus clock */ + clk_ext->cl.dev_id = "ltq_pci"; + clk_ext->cl.con_id = "external"; + clk_ext->cl.clk = clk_ext; + clk_ext->enable = ltq_pci_ext_enable; + clk_ext->disable = ltq_pci_ext_disable; + clkdev_add(&clk_ext->cl); + +} + +void __init ltq_soc_init(void) +{ + ltq_pmu_membase = ltq_remap_resource(<q_pmu_resource); + if (!ltq_pmu_membase) + panic("Failed to remap pmu memory\n"); + + ltq_cgu_membase = ltq_remap_resource(<q_cgu_resource); + if (!ltq_cgu_membase) + panic("Failed to remap cgu memory\n"); + + ltq_ebu_membase = ltq_remap_resource(<q_ebu_resource); + if (!ltq_ebu_membase) + panic("Failed to remap ebu memory\n"); + + /* make sure to unprotect the memory region where flash is located */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); + + /* add our clocks */ + clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI); + clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA); + clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP); + clkdev_add_pmu("ltq_spi.0", NULL, 0, PMU_SPI); + clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT); + clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU); + if (!ltq_is_vr9()) + clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE); + if (!ltq_is_ase()) + clkdev_add_pci(); + if (ltq_is_ase()) { + if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) + clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M); + else + clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M); + clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY), + clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY); + clkdev_add_pmu("ltq_dsl", NULL, 0, + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_AHBS | PMU_DFE); + } else if (ltq_is_vr9()) { + clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), + ltq_vr9_fpi_hz()); + clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY); + clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK); + clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI); + clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI); + clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL); + clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); + clkdev_add_pmu("usb0", NULL, 0, PMU_USB0 | PMU_USB0_P); + clkdev_add_pmu("usb1", NULL, 0, PMU_USB1 | PMU_USB1_P); + clkdev_add_pmu("ltq_vrx200", NULL, 0, + PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB); + clkdev_add_pmu("ltq_dsl", NULL, 0, PMU_DFE | PMU_AHBS); + } else if (ltq_is_ar9()) { + clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), + ltq_ar9_fpi_hz()); + clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH); + clkdev_add_pmu("ltq_dsl", NULL, 0, + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_AHBS | PMU_DFE); + } else { + clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), + ltq_danube_io_region_clock()); + clkdev_add_pmu("ltq_dsl", NULL, 0, + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_AHBS | PMU_DFE); + } +} diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/timer.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/timer.c new file mode 100644 index 0000000000..9794c87c73 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/timer.c @@ -0,0 +1,846 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/miscdevice.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/sched.h> + +#include <asm/irq.h> +#include <asm/div64.h> +#include "../clk.h" + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_timer.h> + +#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 + +#ifdef TIMER1A +#define FIRST_TIMER TIMER1A +#else +#define FIRST_TIMER 2 +#endif + +/* + * GPTC divider is set or not. + */ +#define GPTU_CLC_RMC_IS_SET 0 + +/* + * Timer Interrupt (IRQ) + */ +/* Must be adjusted when ICU driver is available */ +#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) + +/* + * Bits Operation + */ +#define GET_BITS(x, msb, lsb) \ + (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) +#define SET_BITS(x, msb, lsb, value) \ + (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ + (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) + +/* + * GPTU Register Mapping + */ +#define LQ_GPTU (KSEG1 + 0x1E100A00) +#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) +#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) +#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ +#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) +#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) +#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) + +/* + * Clock Control Register + */ +#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) +#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) +#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) +#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) +#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) +#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) +#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) + +#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) +#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) +#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) +#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) +#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) +#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) +#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) + +/* + * ID Register + */ +#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) +#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) +#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) + +/* + * Control Register of Timer/Counter nX + * n is the index of block (1 based index) + * X is either A or B + */ +#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) +#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) +#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) +#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) +#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) +#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ +#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) +#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) +#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) +#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) + +#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) +#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) +#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) +#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) +#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) +#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) +#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) +#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) +#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) + +#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) +#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) +#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) + +#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) +#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) + +#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) +#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) +#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) +#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) +#define TIMER_FLAG_NONE_EDGE 0x0000 +#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) +#define TIMER_FLAG_REAL 0x0000 +#define TIMER_FLAG_INVERT 0x0040 +#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) +#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) +#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) +#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 +#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) +#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) + +struct timer_dev_timer { + unsigned int f_irq_on; + unsigned int irq; + unsigned int flag; + unsigned long arg1; + unsigned long arg2; +}; + +struct timer_dev { + struct mutex gptu_mutex; + unsigned int number_of_timers; + unsigned int occupation; + unsigned int f_gptu_on; + struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; +}; + +unsigned long ltq_danube_fpi_bus_clock(int fpi); +unsigned long ltq_vr9_fpi_bus_clock(int fpi); + +unsigned int ltq_get_fpi_bus_clock(int fpi) { + if (ltq_is_ase()) + return CLOCK_133M; + else if (ltq_is_vr9()) + return ltq_vr9_fpi_bus_clock(fpi); + + return ltq_danube_fpi_bus_clock(fpi); +} + + +static long gptu_ioctl(struct file *, unsigned int, unsigned long); +static int gptu_open(struct inode *, struct file *); +static int gptu_release(struct inode *, struct file *); + +static struct file_operations gptu_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = gptu_ioctl, + .open = gptu_open, + .release = gptu_release +}; + +static struct miscdevice gptu_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "gptu", + .fops = &gptu_fops, +}; + +static struct timer_dev timer_dev; + +static irqreturn_t timer_irq_handler(int irq, void *p) +{ + unsigned int timer; + unsigned int flag; + struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; + + timer = irq - TIMER_INTERRUPT; + if (timer < timer_dev.number_of_timers + && dev_timer == &timer_dev.timer[timer]) { + /* Clear interrupt. */ + ltq_w32(1 << timer, LQ_GPTU_IRNCR); + + /* Call user hanler or signal. */ + flag = dev_timer->flag; + if (!(timer & 0x01) + || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { + /* 16-bit timer or timer A of 32-bit timer */ + switch (TIMER_FLAG_MASK_HANDLE(flag)) { + case TIMER_FLAG_CALLBACK_IN_IRQ: + case TIMER_FLAG_CALLBACK_IN_HB: + if (dev_timer->arg1) + (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); + break; + case TIMER_FLAG_SIGNAL: + send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); + break; + } + } + } + return IRQ_HANDLED; +} + +static inline void lq_enable_gptu(void) +{ + struct clk *clk = clk_get_sys("ltq_gptu", NULL); + clk_enable(clk); + + //ltq_pmu_enable(PMU_GPT); + + /* Set divider as 1, disable write protection for SPEN, enable module. */ + *LQ_GPTU_CLC = + GPTU_CLC_SMC_SET(0x00) | + GPTU_CLC_RMC_SET(0x01) | + GPTU_CLC_FSOE_SET(0) | + GPTU_CLC_SBWE_SET(1) | + GPTU_CLC_EDIS_SET(0) | + GPTU_CLC_SPEN_SET(0) | + GPTU_CLC_DISR_SET(0); +} + +static inline void lq_disable_gptu(void) +{ + struct clk *clk = clk_get_sys("ltq_gptu", NULL); + ltq_w32(0x00, LQ_GPTU_IRNEN); + ltq_w32(0xfff, LQ_GPTU_IRNCR); + + /* Set divider as 0, enable write protection for SPEN, disable module. */ + *LQ_GPTU_CLC = + GPTU_CLC_SMC_SET(0x00) | + GPTU_CLC_RMC_SET(0x00) | + GPTU_CLC_FSOE_SET(0) | + GPTU_CLC_SBWE_SET(0) | + GPTU_CLC_EDIS_SET(0) | + GPTU_CLC_SPEN_SET(0) | + GPTU_CLC_DISR_SET(1); + + clk_enable(clk); +} + +int lq_request_timer(unsigned int timer, unsigned int flag, + unsigned long value, unsigned long arg1, unsigned long arg2) +{ + int ret = 0; + unsigned int con_reg, irnen_reg; + int n, X; + + if (timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", + timer, flag, value); + + if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) + value &= 0xFFFF; + else + timer &= ~0x01; + + mutex_lock(&timer_dev.gptu_mutex); + + /* + * Allocate timer. + */ + if (timer < FIRST_TIMER) { + unsigned int mask; + unsigned int shift; + /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ + unsigned int offset = TIMER2A; + + /* + * Pick up a free timer. + */ + if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { + mask = 1 << offset; + shift = 1; + } else { + mask = 3 << offset; + shift = 2; + } + for (timer = offset; + timer < offset + timer_dev.number_of_timers; + timer += shift, mask <<= shift) + if (!(timer_dev.occupation & mask)) { + timer_dev.occupation |= mask; + break; + } + if (timer >= offset + timer_dev.number_of_timers) { + printk("failed![%d]\n", __LINE__); + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } else + ret = timer; + } else { + register unsigned int mask; + + /* + * Check if the requested timer is free. + */ + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if ((timer_dev.occupation & mask)) { + printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", + __LINE__, mask, timer_dev.occupation); + mutex_unlock(&timer_dev.gptu_mutex); + return -EBUSY; + } else { + timer_dev.occupation |= mask; + ret = 0; + } + } + + /* + * Prepare control register value. + */ + switch (TIMER_FLAG_MASK_EDGE(flag)) { + default: + case TIMER_FLAG_NONE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x00); + break; + case TIMER_FLAG_RISE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x01); + break; + case TIMER_FLAG_FALL_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x02); + break; + case TIMER_FLAG_ANY_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x03); + break; + } + if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) + con_reg |= + TIMER_FLAG_MASK_SRC(flag) == + TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : + GPTU_CON_SRC_EXT_SET(0); + else + con_reg |= + TIMER_FLAG_MASK_SRC(flag) == + TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : + GPTU_CON_SRC_EG_SET(0); + con_reg |= + TIMER_FLAG_MASK_SYNC(flag) == + TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : + GPTU_CON_SYNC_SET(1); + con_reg |= + TIMER_FLAG_MASK_INVERT(flag) == + TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); + con_reg |= + TIMER_FLAG_MASK_SIZE(flag) == + TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : + GPTU_CON_EXT_SET(1); + con_reg |= + TIMER_FLAG_MASK_STOP(flag) == + TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); + con_reg |= + TIMER_FLAG_MASK_TYPE(flag) == + TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : + GPTU_CON_CNT_SET(1); + con_reg |= + TIMER_FLAG_MASK_DIR(flag) == + TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); + + /* + * Fill up running data. + */ + timer_dev.timer[timer - FIRST_TIMER].flag = flag; + timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; + timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; + + /* + * Enable GPTU module. + */ + if (!timer_dev.f_gptu_on) { + lq_enable_gptu(); + timer_dev.f_gptu_on = 1; + } + + /* + * Enable IRQ. + */ + if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { + if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) + timer_dev.timer[timer - FIRST_TIMER].arg1 = + (unsigned long) find_task_by_vpid((int) arg1); + + irnen_reg = 1 << (timer - FIRST_TIMER); + + if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL + || (TIMER_FLAG_MASK_HANDLE(flag) == + TIMER_FLAG_CALLBACK_IN_IRQ + && timer_dev.timer[timer - FIRST_TIMER].arg1)) { + enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); + timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; + } + } else + irnen_reg = 0; + + /* + * Write config register, reload value and enable interrupt. + */ + n = timer >> 1; + X = timer & 0x01; + *LQ_GPTU_CON(n, X) = con_reg; + *LQ_GPTU_RELOAD(n, X) = value; + /* printk("reload value = %d\n", (u32)value); */ + *LQ_GPTU_IRNEN |= irnen_reg; + + mutex_unlock(&timer_dev.gptu_mutex); + printk("successful!\n"); + return ret; +} +EXPORT_SYMBOL(lq_request_timer); + +int lq_free_timer(unsigned int timer) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + if (GPTU_CON_EN(n, X)) + *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); + + *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); + *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); + + if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { + disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); + timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; + } + + timer_dev.occupation &= ~mask; + if (!timer_dev.occupation && timer_dev.f_gptu_on) { + lq_disable_gptu(); + timer_dev.f_gptu_on = 0; + } + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_free_timer); + +int lq_start_timer(unsigned int timer, int is_resume) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == + TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_start_timer); + +int lq_stop_timer(unsigned int timer) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER + || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_stop_timer); + +int lq_reset_counter_flags(u32 timer, u32 flags) +{ + unsigned int oflag; + unsigned int mask, con_reg; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + oflag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + switch (TIMER_FLAG_MASK_EDGE(flags)) { + default: + case TIMER_FLAG_NONE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x00); + break; + case TIMER_FLAG_RISE_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x01); + break; + case TIMER_FLAG_FALL_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x02); + break; + case TIMER_FLAG_ANY_EDGE: + con_reg = GPTU_CON_EDGE_SET(0x03); + break; + } + if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) + con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); + else + con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); + con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); + con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); + con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); + con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); + con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); + con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); + + timer_dev.timer[timer - FIRST_TIMER].flag = flags; + if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) + timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; + + n = timer >> 1; + X = timer & 0x01; + + *LQ_GPTU_CON(n, X) = con_reg; + smp_wmb(); + printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X)); + mutex_unlock(&timer_dev.gptu_mutex); + return 0; +} +EXPORT_SYMBOL(lq_reset_counter_flags); + +int lq_get_count_value(unsigned int timer, unsigned long *value) +{ + unsigned int flag; + unsigned int mask; + int n, X; + + if (!timer_dev.f_gptu_on) + return -EINVAL; + + if (timer < FIRST_TIMER + || timer >= FIRST_TIMER + timer_dev.number_of_timers) + return -EINVAL; + + mutex_lock(&timer_dev.gptu_mutex); + + flag = timer_dev.timer[timer - FIRST_TIMER].flag; + if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) + timer &= ~0x01; + + mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; + if (((timer_dev.occupation & mask) ^ mask)) { + mutex_unlock(&timer_dev.gptu_mutex); + return -EINVAL; + } + + n = timer >> 1; + X = timer & 0x01; + + *value = *LQ_GPTU_COUNT(n, X); + + mutex_unlock(&timer_dev.gptu_mutex); + + return 0; +} +EXPORT_SYMBOL(lq_get_count_value); + +u32 lq_cal_divider(unsigned long freq) +{ + u64 module_freq, fpi = ltq_get_fpi_bus_clock(2); + u32 clock_divider = 1; + module_freq = fpi * 1000; + do_div(module_freq, clock_divider * freq); + return module_freq; +} +EXPORT_SYMBOL(lq_cal_divider); + +int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, + int is_ext_src, unsigned int handle_flag, unsigned long arg1, + unsigned long arg2) +{ + unsigned long divider; + unsigned int flag; + + divider = lq_cal_divider(freq); + if (divider == 0) + return -EINVAL; + flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) + | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) + | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) + | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN + | TIMER_FLAG_MASK_HANDLE(handle_flag); + + printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", + timer, freq, divider); + return lq_request_timer(timer, flag, divider, arg1, arg2); +} +EXPORT_SYMBOL(lq_set_timer); + +int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, + unsigned long arg1, unsigned long arg2) +{ + printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); + return lq_request_timer(timer, flag, reload, arg1, arg2); +} +EXPORT_SYMBOL(lq_set_counter); + +static long gptu_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret; + struct gptu_ioctl_param param; + + if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) + return -EFAULT; + copy_from_user(¶m, (void *) arg, sizeof(param)); + + if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER + || GPTU_SET_COUNTER) && param.timer < 2) + || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) + && !access_ok(VERIFY_WRITE, arg, + sizeof(struct gptu_ioctl_param))) + return -EFAULT; + + switch (cmd) { + case GPTU_REQUEST_TIMER: + ret = lq_request_timer(param.timer, param.flag, param.value, + (unsigned long) param.pid, + (unsigned long) param.sig); + if (ret > 0) { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + timer, &ret, sizeof(&ret)); + ret = 0; + } + break; + case GPTU_FREE_TIMER: + ret = lq_free_timer(param.timer); + break; + case GPTU_START_TIMER: + ret = lq_start_timer(param.timer, param.flag); + break; + case GPTU_STOP_TIMER: + ret = lq_stop_timer(param.timer); + break; + case GPTU_GET_COUNT_VALUE: + ret = lq_get_count_value(param.timer, ¶m.value); + if (!ret) + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + value, ¶m.value, + sizeof(param.value)); + break; + case GPTU_CALCULATE_DIVIDER: + param.value = lq_cal_divider(param.value); + if (param.value == 0) + ret = -EINVAL; + else { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + value, ¶m.value, + sizeof(param.value)); + ret = 0; + } + break; + case GPTU_SET_TIMER: + ret = lq_set_timer(param.timer, param.value, + TIMER_FLAG_MASK_STOP(param.flag) != + TIMER_FLAG_ONCE ? 1 : 0, + TIMER_FLAG_MASK_SRC(param.flag) == + TIMER_FLAG_EXT_SRC ? 1 : 0, + TIMER_FLAG_MASK_HANDLE(param.flag) == + TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : + TIMER_FLAG_NO_HANDLE, + (unsigned long) param.pid, + (unsigned long) param.sig); + if (ret > 0) { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + timer, &ret, sizeof(&ret)); + ret = 0; + } + break; + case GPTU_SET_COUNTER: + lq_set_counter(param.timer, param.flag, param.value, 0, 0); + if (ret > 0) { + copy_to_user(&((struct gptu_ioctl_param *) arg)-> + timer, &ret, sizeof(&ret)); + ret = 0; + } + break; + default: + ret = -ENOTTY; + } + + return ret; +} + +static int gptu_open(struct inode *inode, struct file *file) +{ + return 0; +} + +static int gptu_release(struct inode *inode, struct file *file) +{ + return 0; +} + +int __init lq_gptu_init(void) +{ + int ret; + unsigned int i; + + ltq_w32(0, LQ_GPTU_IRNEN); + ltq_w32(0xfff, LQ_GPTU_IRNCR); + + memset(&timer_dev, 0, sizeof(timer_dev)); + mutex_init(&timer_dev.gptu_mutex); + + lq_enable_gptu(); + timer_dev.number_of_timers = GPTU_ID_CFG * 2; + lq_disable_gptu(); + if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) + timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; + printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); + + ret = misc_register(&gptu_miscdev); + if (ret) { + printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); + return ret; + } else { + printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); + } + + for (i = 0; i < timer_dev.number_of_timers; i++) { + ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); + if (ret) { + for (; i >= 0; i--) + free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); + misc_deregister(&gptu_miscdev); + printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); + return ret; + } else { + timer_dev.timer[i].irq = TIMER_INTERRUPT + i; + disable_irq(timer_dev.timer[i].irq); + printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); + } + } + + return 0; +} + +void __exit lq_gptu_exit(void) +{ + unsigned int i; + + for (i = 0; i < timer_dev.number_of_timers; i++) { + if (timer_dev.timer[i].f_irq_on) + disable_irq(timer_dev.timer[i].irq); + free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); + } + lq_disable_gptu(); + misc_deregister(&gptu_miscdev); +} + +module_init(lq_gptu_init); +module_exit(lq_gptu_exit); diff --git a/target/linux/lantiq/files-3.3/arch/mips/pci/fixup-lantiq-pcie.c b/target/linux/lantiq/files-3.3/arch/mips/pci/fixup-lantiq-pcie.c new file mode 100644 index 0000000000..84517dfbc3 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/pci/fixup-lantiq-pcie.c @@ -0,0 +1,81 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_fixup_pcie.c +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCIe +** +** DATE : 02 Mar 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe Root Complex Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Version $Date $Author $Comment +** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version +*******************************************************************************/ +/*! + \file ifxmips_fixup_pcie.c + \ingroup IFX_PCIE + \brief PCIe Fixup functions source file +*/ +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> + +#include <lantiq_soc.h> + +#include "pcie-lantiq.h" + +#define PCI_VENDOR_ID_INFINEON 0x15D1 +#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F +#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 +#define PCI_VENDOR_ID_LANTIQ 0x1BEF +#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011 + + + +static void __devinit +ifx_pcie_fixup_resource(struct pci_dev *dev) +{ + u32 reg; + + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); + + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s: fixup host controller %s (%04x:%04x)\n", + __func__, pci_name(dev), dev->vendor, dev->device); + + /* Setup COMMAND register */ + reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | + PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR; + pci_write_config_word(dev, PCI_COMMAND, reg); + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource); + +static void __devinit +ifx_pcie_rc_class_early_fixup(struct pci_dev *dev) +{ + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); + + if (dev->devfn == PCI_DEVFN(0, 0) && + (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { + + dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff); + + printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__); + } + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, + ifx_pcie_rc_class_early_fixup); + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE, + ifx_pcie_rc_class_early_fixup); diff --git a/target/linux/lantiq/files-3.3/arch/mips/pci/fixup-lantiq.c b/target/linux/lantiq/files-3.3/arch/mips/pci/fixup-lantiq.c new file mode 100644 index 0000000000..daf5ae9e42 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/pci/fixup-lantiq.c @@ -0,0 +1,42 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/of_irq.h> +#include <linux/of_pci.h> + +int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin) = NULL; +int (*ltqpci_plat_arch_init)(struct pci_dev *dev) = NULL; +int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL; +int *ltq_pci_irq_map; + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (ltqpci_plat_arch_init) + return ltqpci_plat_arch_init(dev); + + if (ltqpci_plat_dev_init) + return ltqpci_plat_dev_init(dev); + + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ltqpci_map_irq) + return ltqpci_map_irq(dev, slot, pin); + if (ltq_pci_irq_map[slot]) { + dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, ltq_pci_irq_map[slot]); + return ltq_pci_irq_map[slot]; + } + printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n", + slot); + + return 0; +} + + diff --git a/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq-msi.c b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq-msi.c new file mode 100644 index 0000000000..9cbf639bb1 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq-msi.c @@ -0,0 +1,399 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_pcie_msi.c +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCI MSI sub module +** +** DATE : 02 Mar 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe MSI Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Date $Author $Comment +** 02 Mar,2009 Lei Chuanhua Initial version +*******************************************************************************/ +/*! + \defgroup IFX_PCIE_MSI MSI OS APIs + \ingroup IFX_PCIE + \brief PCIe bus driver OS interface functions +*/ + +/*! + \file ifxmips_pcie_msi.c + \ingroup IFX_PCIE + \brief PCIe MSI OS interface file +*/ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/pci.h> +#include <linux/msi.h> +#include <linux/module.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/traps.h> + +#include "pcie-lantiq.h" + +#define IFX_MSI_IRQ_NUM 16 +#define SM(_v, _f) (((_v) << _f##_S) & (_f)) + +#define IFX_MSI_PIC_REG_BASE (KSEG1 | 0x1F700000) +#define IFX_PCIE_MSI_IR0 (INT_NUM_IM4_IRL0 + 27) +#define IFX_PCIE_MSI_IR1 (INT_NUM_IM4_IRL0 + 28) +#define IFX_PCIE_MSI_IR2 (INT_NUM_IM4_IRL0 + 29) +#define IFX_PCIE_MSI_IR3 (INT_NUM_IM0_IRL0 + 30) + +#define IFX_MSI_PCI_INT_DISABLE 0x80000000 +#define IFX_MSI_PIC_INT_LINE 0x30000000 +#define IFX_MSI_PIC_MSG_ADDR 0x0FFF0000 +#define IFX_MSI_PIC_MSG_DATA 0x0000FFFF +#define IFX_MSI_PIC_BIG_ENDIAN 1 +#define IFX_MSI_PIC_INT_LINE_S 28 +#define IFX_MSI_PIC_MSG_ADDR_S 16 +#define IFX_MSI_PIC_MSG_DATA_S 0x0 + +enum { + IFX_PCIE_MSI_IDX0 = 0, + IFX_PCIE_MSI_IDX1, + IFX_PCIE_MSI_IDX2, + IFX_PCIE_MSI_IDX3, +}; + +typedef struct ifx_msi_irq_idx { + const int irq; + const int idx; +}ifx_msi_irq_idx_t; + +struct ifx_msi_pic { + volatile u32 pic_table[IFX_MSI_IRQ_NUM]; + volatile u32 pic_endian; /* 0x40 */ +}; +typedef struct ifx_msi_pic *ifx_msi_pic_t; + +typedef struct ifx_msi_irq { + const volatile ifx_msi_pic_t msi_pic_p; + const u32 msi_phy_base; + const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM]; + /* + * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is + * in use. + */ + u16 msi_free_irq_bitmask; + + /* + * Each bit in msi_multiple_irq_bitmask tells that the device using + * this bit in msi_free_irq_bitmask is also using the next bit. This + * is used so we can disable all of the MSI interrupts when a device + * uses multiple. + */ + u16 msi_multiple_irq_bitmask; +}ifx_msi_irq_t; + +static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = { + { + .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE, + .msi_phy_base = PCIE_MSI_PHY_BASE, + .msi_irq_idx = { + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, + }, + .msi_free_irq_bitmask = 0, + .msi_multiple_irq_bitmask= 0, + }, +#ifdef CONFIG_IFX_PCIE_2ND_CORE + { + .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE, + .msi_phy_base = PCIE1_MSI_PHY_BASE, + .msi_irq_idx = { + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, + {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, + }, + .msi_free_irq_bitmask = 0, + .msi_multiple_irq_bitmask= 0, + + }, +#endif /* CONFIG_IFX_PCIE_2ND_CORE */ +}; + +/* + * This lock controls updates to msi_free_irq_bitmask, + * msi_multiple_irq_bitmask and pic register settting + */ +static DEFINE_SPINLOCK(ifx_pcie_msi_lock); + +void pcie_msi_pic_init(int pcie_port) +{ + spin_lock(&ifx_pcie_msi_lock); + msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN; + spin_unlock(&ifx_pcie_msi_lock); +} + +/** + * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) + * \brief Called when a driver request MSI interrupts instead of the + * legacy INT A-D. This routine will allocate multiple interrupts + * for MSI devices that support them. A device can override this by + * programming the MSI control bits [6:4] before calling + * pci_enable_msi(). + * + * \param[in] pdev Device requesting MSI interrupts + * \param[in] desc MSI descriptor + * + * \return -EINVAL Invalid pcie root port or invalid msi bit + * \return 0 OK + * \ingroup IFX_PCIE_MSI + */ +int +arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) +{ + int irq, pos; + u16 control; + int irq_idx; + int irq_step; + int configured_private_bits; + int request_private_bits; + struct msi_msg msg; + u16 search_mask; + struct ifx_pci_controller *ctrl = pdev->bus->sysdata; + int pcie_port = ctrl->port; + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev)); + + /* XXX, skip RC MSI itself */ + if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__); + return -EINVAL; + } + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } + else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) { + request_private_bits = 0; + } +again: + /* + * The IRQs have to be aligned on a power of two based on the + * number being requested. + */ + irq_step = (1 << request_private_bits); + + /* Mask with one bit for each IRQ */ + search_mask = (1 << irq_step) - 1; + + /* + * We're going to search msi_free_irq_bitmask_lock for zero + * bits. This represents an MSI interrupt number that isn't in + * use. + */ + spin_lock(&ifx_pcie_msi_lock); + for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) { + if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) { + msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; + msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos; + break; + } + } + spin_unlock(&ifx_pcie_msi_lock); + + /* Make sure the search for available interrupts didn't fail */ + if (pos >= IFX_MSI_IRQ_NUM) { + if (request_private_bits) { + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free " + "interrupts, trying just one", __func__, 1 << request_private_bits); + request_private_bits = 0; + goto again; + } + else { + printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__); + return -EINVAL; + } + } + irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq; + irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx; + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx); + + /* + * Initialize MSI. This has to match the memory-write endianess from the device + * Address bits [23:12] + */ + spin_lock(&ifx_pcie_msi_lock); + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) | + SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) | + SM((1 << pos), IFX_MSI_PIC_MSG_DATA); + + /* Enable this entry */ + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE; + spin_unlock(&ifx_pcie_msi_lock); + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n", + pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]); + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= (request_private_bits << 4); + pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control); + + irq_set_msi_desc(irq, desc); + msg.address_hi = 0x0; + msg.address_lo = msi_irqs[pcie_port].msi_phy_base; + msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA); + IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data); + + write_msi_msg(irq, &msg); + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); + return 0; +} + +static int +pcie_msi_irq_to_port(unsigned int irq, int *port) +{ + int ret = 0; + + if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 || + irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) { + *port = IFX_PCIE_PORT0; + } +#ifdef CONFIG_IFX_PCIE_2ND_CORE + else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 || + irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) { + *port = IFX_PCIE_PORT1; + } +#endif /* CONFIG_IFX_PCIE_2ND_CORE */ + else { + printk(KERN_ERR "%s: Attempted to teardown illegal " + "MSI interrupt (%d)\n", __func__, irq); + ret = -EINVAL; + } + return ret; +} + +/** + * \fn void arch_teardown_msi_irq(unsigned int irq) + * \brief Called when a device no longer needs its MSI interrupts. All + * MSI interrupts for the device are freed. + * + * \param irq The devices first irq number. There may be multple in sequence. + * \return none + * \ingroup IFX_PCIE_MSI + */ +void +arch_teardown_msi_irq(unsigned int irq) +{ + int pos; + int number_irqs; + u16 bitmask; + int pcie_port; + + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__); + + BUG_ON(irq > (INT_NUM_IM4_IRL0 + 31)); + + if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) { + return; + } + + /* Shift the mask to the correct bit location, not always correct + * Probally, the first match will be chosen. + */ + for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) { + if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) + && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) { + break; + } + } + if (pos >= IFX_MSI_IRQ_NUM) { + printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__); + return; + } + spin_lock(&ifx_pcie_msi_lock); + /* Disable this entry */ + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE; + msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA); + spin_unlock(&ifx_pcie_msi_lock); + /* + * Count the number of IRQs we need to free by looking at the + * msi_multiple_irq_bitmask. Each bit set means that the next + * IRQ is also owned by this device. + */ + number_irqs = 0; + while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && + (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) { + number_irqs++; + } + number_irqs++; + + /* Mask with one bit for each IRQ */ + bitmask = (1 << number_irqs) - 1; + + bitmask <<= pos; + if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) { + printk(KERN_ERR "%s: Attempted to teardown MSI " + "interrupt (%d) not in use\n", __func__, irq); + return; + } + /* Checks are done, update the in use bitmask */ + spin_lock(&ifx_pcie_msi_lock); + msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask; + msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1); + spin_unlock(&ifx_pcie_msi_lock); + IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); +MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module"); +MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver"); + diff --git a/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq-phy.c b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq-phy.c new file mode 100644 index 0000000000..9f5027d7cc --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq-phy.c @@ -0,0 +1,408 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_pcie_phy.c +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCIe PHY sub module +** +** DATE : 14 May 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe Root Complex Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Version $Date $Author $Comment +** 0.0.1 14 May,2009 Lei Chuanhua Initial version +*******************************************************************************/ +/*! + \file ifxmips_pcie_phy.c + \ingroup IFX_PCIE + \brief PCIe PHY PLL register programming source file +*/ +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/paccess.h> +#include <linux/delay.h> + +#include "pcie-lantiq.h" + +/* PCIe PDI only supports 16 bit operation */ + +#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \ + ((*(volatile u16 *) (__addr)) = (__data)) + +#define IFX_PCIE_PHY_REG_READ16(__addr) \ + (*(volatile u16 *) (__addr)) + +#define IFX_PCIE_PHY_REG16(__addr) \ + (*(volatile u16 *) (__addr)) + +#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \ + u16 read_data; \ + u16 write_data; \ + read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \ + write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\ + IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \ +} while (0) + +#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */ + +static void +pcie_phy_comm_setup(int pcie_port) +{ + /* PLL Setting */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); + + /* increase the bias reference voltage */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); + + /* Endcnt */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); + + /* force */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); + + /* predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); + + /* ctrl_lim */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); + + /* ctrl */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); + + /* predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); + + /* RTERM*/ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); + + /* Improved 100MHz clock output */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); + + /* Reduced CDR BW to avoid glitches */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); +} + +#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE +static void +pcie_phy_36mhz_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + + /* en_ext_mmd_div_ratio */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); + + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); + + /* const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); + + /* const sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); + + /* pllmod */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ + +#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE +static void +pcie_phy_36mhz_ssc_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + + /* PLL Setting */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); + + /* Increase the bias reference voltage */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); + + /* Endcnt */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); + + /* Force */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); + + /* Predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); + + /* ctrl_lim */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); + + /* ctrl */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); + + /* predrv_ser_en */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); + + /* RTERM*/ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); + + /* en_ext_mmd_div_ratio */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400); + + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); + + /* const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); + + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100); + /* const sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); + + /* pllmod */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF); + + /* improved 100MHz clock output */ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); + + /* reduced CDR BW to avoid glitches */ + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */ + +#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE +static void +pcie_phy_25mhz_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200); + + /* en_ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */ + +#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE +static void +pcie_phy_100mhz_mode_setup(int pcie_port) +{ + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); + /* en_ext_mmd_div_ratio */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); + + /* ext_mmd_div_ratio*/ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); + + /* pll_ensdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); + + /* en_const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); + + /* mmd */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); + + /* lf_mode */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); + + /* const_sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); + + /* const sdm */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); + + /* pllmod */ + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); + + IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); +} +#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */ + +static int +pcie_phy_wait_startup_ready(int pcie_port) +{ + int i; + + for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) { + if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) { + break; + } + udelay(10); + } + if (i >= IFX_PCIE_PLL_TIMEOUT) { + printk(KERN_ERR "%s PLL Link timeout\n", __func__); + return -1; + } + return 0; +} + +static void +pcie_phy_load_enable(int pcie_port, int slice) +{ + /* Set the load_en of tx/rx slice to '1' */ + switch (slice) { + case 1: + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010); + break; + case 2: + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010); + break; + case 3: + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002); + break; + } +} + +static void +pcie_phy_load_disable(int pcie_port, int slice) +{ + /* set the load_en of tx/rx slice to '0' */ + switch (slice) { + case 1: + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010); + break; + case 2: + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010); + break; + case 3: + IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002); + break; + } +} + +static void pcie_phy_load_war(int pcie_port) +{ + int slice; + + for (slice = 1; slice < 4; slice++) { + pcie_phy_load_enable(pcie_port, slice); + udelay(1); + pcie_phy_load_disable(pcie_port, slice); + } +} + +static void pcie_phy_tx2_modulation(int pcie_port) +{ + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF); + mdelay(1); + IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF); +} + +static void pcie_phy_tx1_modulation(int pcie_port) +{ + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF); + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF); + mdelay(1); + IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF); +} + +static void pcie_phy_tx_modulation_war(int pcie_port) +{ + int i; +#define PCIE_PHY_MODULATION_NUM 5 + for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) { + pcie_phy_tx2_modulation(pcie_port); + pcie_phy_tx1_modulation(pcie_port); + } +#undef PCIE_PHY_MODULATION_NUM +} + +void pcie_phy_clock_mode_setup(int pcie_port) +{ + pcie_pdi_big_endian(pcie_port); + + /* Enable PDI to access PCIe PHY register */ + pcie_pdi_pmu_enable(pcie_port); + + /* Configure PLL and PHY clock */ + pcie_phy_comm_setup(pcie_port); + +#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE + pcie_phy_36mhz_mode_setup(pcie_port); +#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE) + pcie_phy_36mhz_ssc_mode_setup(pcie_port); +#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE) + pcie_phy_25mhz_mode_setup(pcie_port); +#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE) + pcie_phy_100mhz_mode_setup(pcie_port); +#else + #error "PCIE PHY Clock Mode must be chosen first!!!!" +#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ + + /* Enable PCIe PHY and make PLL setting take effect */ + pcie_phy_pmu_enable(pcie_port); + + /* Check if we are in startup_ready status */ + pcie_phy_wait_startup_ready(pcie_port); + + pcie_phy_load_war(pcie_port); + + /* Apply TX modulation workarounds */ + pcie_phy_tx_modulation_war(pcie_port); + +#ifdef IFX_PCI_PHY_REG_DUMP + IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n"); + pcie_phy_reg_dump(pcie_port); +#endif +} + diff --git a/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.c b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.c new file mode 100644 index 0000000000..1df55b5c02 --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.c @@ -0,0 +1,1146 @@ +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <asm/paccess.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> +#include <linux/platform_device.h> + +#define CONFIG_IFX_PCIE_1ST_CORE + +#include "pcie-lantiq.h" + +#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25) +#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8) +#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9) +#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10) +#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11) +#define MS(_v, _f) (((_v) & (_f)) >> _f##_S) +#define SM(_v, _f) (((_v) << _f##_S) & (_f)) +#define IFX_REG_SET_BIT(_f, _r) \ + IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r)) +#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10 +#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 +#define IFX_PCIE_PHY_LOOP_CNT 5 + +static DEFINE_SPINLOCK(ifx_pcie_lock); + +int pcibios_1st_host_bus_nr(void); + +unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); + +static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { + { + .ir_irq = { + .irq = IFX_PCIE_IR, + .name = "ifx_pcie_rc0", + }, + + .legacy_irq = { + { + .irq_bit = PCIE_IRN_INTA, + .irq = IFX_PCIE_INTA, + }, + { + .irq_bit = PCIE_IRN_INTB, + .irq = IFX_PCIE_INTB, + }, + { + .irq_bit = PCIE_IRN_INTC, + .irq = IFX_PCIE_INTC, + }, + { + .irq_bit = PCIE_IRN_INTD, + .irq = IFX_PCIE_INTD, + }, + }, + }, +}; + +static inline int pcie_ltssm_enable(int pcie_port) +{ + int i; + + IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */ + + /* Wait for the link to come up */ + for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) { + if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) { + break; + } + udelay(10); + } + if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) { + IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__); + return -1; + } + return 0; +} + +static inline void pcie_status_register_clear(int pcie_port) +{ + IFX_REG_W32(0, PCIE_RC_DR(pcie_port)); + IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port)); + IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port)); + IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port)); + IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port)); + IFX_REG_W32(0, PCIE_RSTS(pcie_port)); + IFX_REG_W32(0, PCIE_UES_R(pcie_port)); + IFX_REG_W32(0, PCIE_UEMR(pcie_port)); + IFX_REG_W32(0, PCIE_UESR(pcie_port)); + IFX_REG_W32(0, PCIE_CESR(pcie_port)); + IFX_REG_W32(0, PCIE_CEMR(pcie_port)); + IFX_REG_W32(0, PCIE_RESR(pcie_port)); + IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port)); + IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port)); + IFX_REG_W32(0, PCIE_TPFCS(pcie_port)); + IFX_REG_W32(0, PCIE_TNPFCS(pcie_port)); + IFX_REG_W32(0, PCIE_TCFCS(pcie_port)); + IFX_REG_W32(0, PCIE_QSR(pcie_port)); + IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port)); +} + +static inline int ifx_pcie_link_up(int pcie_port) +{ + return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0; +} + +static inline void pcie_mem_io_setup(int pcie_port) +{ + unsigned int reg; + /* + * BAR[0:1] readonly register + * RC contains only minimal BARs for packets mapped to this device + * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that + * reside on the downstream side fo the bridge. + */ + reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR) + | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR); + IFX_REG_W32(reg, PCIE_MBML(pcie_port)); + + /* PCIe_PBML, same as MBML */ + IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port)); + + /* IO Address Range */ + reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR) + | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR); + reg |= PCIE_IOBLSECS_32BIT_IO_ADDR; + IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port)); + + reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT) + | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE); + IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port)); +} + +static inline void pcie_msi_setup(int pcie_port) +{ + unsigned int reg; + + /* XXX, MSI stuff should only apply to EP */ + /* MSI Capability: Only enable 32-bit addresses */ + reg = IFX_REG_R32(PCIE_MCAPR(pcie_port)); + reg &= ~PCIE_MCAPR_ADDR64_CAP; + reg |= PCIE_MCAPR_MSI_ENABLE; + + /* Disable multiple message */ + reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE); + IFX_REG_W32(reg, PCIE_MCAPR(pcie_port)); +} + +static inline void pcie_pm_setup(int pcie_port) +{ + unsigned int reg; + + /* Enable PME, Soft reset enabled */ + reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port)); + reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST; + IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port)); +} + +static inline void pcie_bus_setup(int pcie_port) +{ + unsigned int reg; + + reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM); + IFX_REG_W32(reg, PCIE_BNR(pcie_port)); +} + +static inline void pcie_device_setup(int pcie_port) +{ + unsigned int reg; + + /* Device capability register, set up Maximum payload size */ + reg = IFX_REG_R32(PCIE_DCAP(pcie_port)); + reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT; + reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE); + + /* Only available for EP */ + reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY); + IFX_REG_W32(reg, PCIE_DCAP(pcie_port)); + + /* Device control and status register */ + /* Set Maximum Read Request size for the device as a Requestor */ + reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port)); + + /* + * Request size can be larger than the MPS used, but the completions returned + * for the read will be bounded by the MPS size. + * In our system, Max request size depends on AHB burst size. It is 64 bytes. + * but we set it as 128 as minimum one. + */ + reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE) + | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE); + + /* Enable relaxed ordering, no snoop, and all kinds of errors */ + reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN; + + IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port)); +} + +static inline void pcie_link_setup(int pcie_port) +{ + unsigned int reg; + + /* + * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM + * L0s is reported during link training via TS1 order set by N_FTS + */ + reg = IFX_REG_R32(PCIE_LCAP(pcie_port)); + reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY; + reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY); + IFX_REG_W32(reg, PCIE_LCAP(pcie_port)); + + /* Link control and status register */ + reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); + + /* Link Enable, ASPM enabled */ + reg &= ~PCIE_LCTLSTS_LINK_DISABLE; + +#ifdef CONFIG_PCIEASPM + /* + * We use the same physical reference clock that the platform provides on the connector + * It paved the way for ASPM to calculate the new exit Latency + */ + reg |= PCIE_LCTLSTS_SLOT_CLK_CFG; + reg |= PCIE_LCTLSTS_COM_CLK_CFG; + /* + * We should disable ASPM by default except that we have dedicated power management support + * Enable ASPM will cause the system hangup/instability, performance degration + */ + reg |= PCIE_LCTLSTS_ASPM_ENABLE; +#else + reg &= ~PCIE_LCTLSTS_ASPM_ENABLE; +#endif /* CONFIG_PCIEASPM */ + + /* + * The maximum size of any completion with data packet is bounded by the MPS setting + * in device control register + */ + /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */ + reg &= ~ PCIE_LCTLSTS_RCB128; + IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); +} + +static inline void pcie_error_setup(int pcie_port) +{ + unsigned int reg; + + /* + * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone + * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE + */ + reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); + reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE; + + IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); + + /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */ + reg = IFX_REG_R32(PCIE_UEMR(pcie_port)); + reg &= ~PCIE_ALL_UNCORRECTABLE_ERR; + IFX_REG_W32(reg, PCIE_UEMR(pcie_port)); + + /* Uncorrectable Error Severity Register, ALL errors are FATAL */ + IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port)); + + /* Correctable Error Mask Register, unmask <enable> all bits */ + reg = IFX_REG_R32(PCIE_CEMR(pcie_port)); + reg &= ~PCIE_CORRECTABLE_ERR; + IFX_REG_W32(reg, PCIE_CEMR(pcie_port)); + + /* Advanced Error Capabilities and Control Registr */ + reg = IFX_REG_R32(PCIE_AECCR(pcie_port)); + reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN; + IFX_REG_W32(reg, PCIE_AECCR(pcie_port)); + + /* Root Error Command Register, Report all types of errors */ + reg = IFX_REG_R32(PCIE_RECR(pcie_port)); + reg |= PCIE_RECR_ERR_REPORT_EN; + IFX_REG_W32(reg, PCIE_RECR(pcie_port)); + + /* Clear the Root status register */ + reg = IFX_REG_R32(PCIE_RESR(pcie_port)); + IFX_REG_W32(reg, PCIE_RESR(pcie_port)); +} + +static inline void pcie_root_setup(int pcie_port) +{ + unsigned int reg; + + /* Root control and capabilities register */ + reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port)); + reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN; + IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port)); +} + +static inline void pcie_vc_setup(int pcie_port) +{ + unsigned int reg; + + /* Port VC Capability Register 2 */ + reg = IFX_REG_R32(PCIE_PVC2(pcie_port)); + reg &= ~PCIE_PVC2_VC_ARB_WRR; + reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR; + IFX_REG_W32(reg, PCIE_PVC2(pcie_port)); + + /* VC0 Resource Capability Register */ + reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port)); + reg &= ~PCIE_VC0_RC_REJECT_SNOOP; + IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port)); +} + +static inline void pcie_port_logic_setup(int pcie_port) +{ + unsigned int reg; + + /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */ + reg = IFX_REG_R32(PCIE_AFR(pcie_port)); + reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM); + reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM) + | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM); + /* L0s and L1 entry latency */ + reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY); + reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY) + | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY); + IFX_REG_W32(reg, PCIE_AFR(pcie_port)); + + /* Port Link Control Register */ + reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); + reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */ + IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); + + /* Lane Skew Register */ + reg = IFX_REG_R32(PCIE_LSR(pcie_port)); + /* Enable ACK/NACK and FC */ + reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); + IFX_REG_W32(reg, PCIE_LSR(pcie_port)); + + /* Symbol Timer Register and Filter Mask Register 1 */ + reg = IFX_REG_R32(PCIE_STRFMR(pcie_port)); + + /* Default SKP interval is very accurate already, 5us */ + /* Enable IO/CFG transaction */ + reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE; + /* Disable FC WDT */ + reg &= ~PCIE_STRFMR_FC_WDT_DISABLE; + IFX_REG_W32(reg, PCIE_STRFMR(pcie_port)); + + /* Filter Masker Register 2 */ + reg = IFX_REG_R32(PCIE_FMR2(pcie_port)); + reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1; + IFX_REG_W32(reg, PCIE_FMR2(pcie_port)); + + /* VC0 Completion Receive Queue Control Register */ + reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)); + reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE; + reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE); + IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port)); +} + +static inline void pcie_rc_cfg_reg_setup(int pcie_port) +{ + /* diable ltssm */ + IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); + + pcie_mem_io_setup(pcie_port); + pcie_msi_setup(pcie_port); + pcie_pm_setup(pcie_port); + pcie_bus_setup(pcie_port); + pcie_device_setup(pcie_port); + pcie_link_setup(pcie_port); + pcie_error_setup(pcie_port); + pcie_root_setup(pcie_port); + pcie_vc_setup(pcie_port); + pcie_port_logic_setup(pcie_port); +} + +static int ifx_pcie_wait_phy_link_up(int pcie_port) +{ + int i; + + /* Wait for PHY link is up */ + for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) { + if (ifx_pcie_link_up(pcie_port)) { + break; + } + udelay(100); + } + if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) { + printk(KERN_ERR "%s timeout\n", __func__); + return -1; + } + + /* Check data link up or not */ + if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { + printk(KERN_ERR "%s DLL link is still down\n", __func__); + return -1; + } + + /* Check Data link active or not */ + if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { + printk(KERN_ERR "%s DLL is not active\n", __func__); + return -1; + } + return 0; +} + +static inline int pcie_app_loigc_setup(int pcie_port) +{ + IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port)); + + /* Pull PCIe EP out of reset */ + pcie_device_rst_deassert(pcie_port); + + /* Start LTSSM training between RC and EP */ + pcie_ltssm_enable(pcie_port); + + /* Check PHY status after enabling LTSSM */ + if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) { + return -1; + } + return 0; +} + +/* + * Must be done after ltssm due to based on negotiated link + * width and payload size + * Update the Replay Time Limit. Empirically, some PCIe + * devices take a little longer to respond than expected under + * load. As a workaround for this we configure the Replay Time + * Limit to the value expected for a 512 byte MPS instead of + * our actual 128 byte MPS. The numbers below are directly + * from the PCIe spec table 3-4/5. + */ +static inline void pcie_replay_time_update(int pcie_port) +{ + unsigned int reg; + int nlw; + int rtl; + + reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); + + nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH); + switch (nlw) { + case PCIE_MAX_LENGTH_WIDTH_X1: + rtl = 1677; + break; + case PCIE_MAX_LENGTH_WIDTH_X2: + rtl = 867; + break; + case PCIE_MAX_LENGTH_WIDTH_X4: + rtl = 462; + break; + case PCIE_MAX_LENGTH_WIDTH_X8: + rtl = 258; + break; + default: + rtl = 1677; + break; + } + reg = IFX_REG_R32(PCIE_ALTRT(pcie_port)); + reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT; + reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT); + IFX_REG_W32(reg, PCIE_ALTRT(pcie_port)); + + IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n", + __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port))); +} + +/* + * Table 359 Enhanced Configuration Address Mapping1) + * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1 + * Memory Address PCI Express Configuration Space + * A[(20+n-1):20] Bus Number 1 < n < 8 + * A[19:15] Device Number + * A[14:12] Function Number + * A[11:8] Extended Register Number + * A[7:2] Register Number + * A[1:0] Along with size of the access, used to generate Byte Enables + * For VR9, only the address bits [22:0] are mapped to the configuration space: + * . Address bits [22:20] select the target bus (1-of-8)1) + * . Address bits [19:15] select the target device (1-of-32) on the bus + * . Address bits [14:12] select the target function (1-of-8) within the device. + * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space + * . Address bits [1:0] define the start byte location within the selected dword. + */ +static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where) +{ + unsigned int addr; + u8 bus; + + if (!bus_num) { + /* type 0 */ + addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3); + } else { + bus = bus_num; + /* type 1, only support 8 buses */ + addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) | + ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3); + } + IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n", + __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr); + return addr; +} + +static int pcie_valid_config(int pcie_port, int bus, int dev) +{ + /* RC itself */ + if ((bus == 0) && (dev == 0)) + return 1; + + /* No physical link */ + if (!ifx_pcie_link_up(pcie_port)) + return 0; + + /* Bus zero only has RC itself + * XXX, check if EP will be integrated + */ + if ((bus == 0) && (dev != 0)) + return 0; + + /* Maximum 8 buses supported for VRX */ + if (bus > 9) + return 0; + + /* + * PCIe is PtP link, one bus only supports only one device + * except bus zero and PCIe switch which is virtual bus device + * The following two conditions really depends on the system design + * and attached the device. + * XXX, how about more new switch + */ + if ((bus == 1) && (dev != 0)) + return 0; + + if ((bus >= 3) && (dev != 0)) + return 0; + return 1; +} + +static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg) +{ + return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); +} + +static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val) +{ + IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); +} + +static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg) +{ + return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); +} + +static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val) +{ + IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); +} + +unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value) +{ + unsigned int tvalue = value; + + if (where == PCI_PRIMARY_BUS) { + u8 primary, secondary, subordinate; + + primary = tvalue & 0xFF; + secondary = (tvalue >> 8) & 0xFF; + subordinate = (tvalue >> 16) & 0xFF; + primary += pcibios_1st_host_bus_nr(); + secondary += pcibios_1st_host_bus_nr(); + subordinate += pcibios_1st_host_bus_nr(); + tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16); + } + return tvalue; +} + +unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value) +{ + unsigned int tvalue = value; + + if (where == PCI_PRIMARY_BUS) { + u8 primary, secondary, subordinate; + + primary = tvalue & 0xFF; + secondary = (tvalue >> 8) & 0xFF; + subordinate = (tvalue >> 16) & 0xFF; + if (primary > 0 && primary != 0xFF) + primary -= pcibios_1st_host_bus_nr(); + if (secondary > 0 && secondary != 0xFF) + secondary -= pcibios_1st_host_bus_nr(); + if (subordinate > 0 && subordinate != 0xFF) + subordinate -= pcibios_1st_host_bus_nr(); + tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16); + } else if (where == PCI_SUBORDINATE_BUS) { + u8 subordinate = tvalue & 0xFF; + subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0; + tvalue = subordinate; + } + return tvalue; +} + +/** + * \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + * int where, int size, unsigned int *value) + * \brief Read a value from configuration space + * + * \param[in] bus Pointer to pci bus + * \param[in] devfn PCI device function number + * \param[in] where PCI register number + * \param[in] size Register read size + * \param[out] value Pointer to return value + * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number + * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported + * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found + * \return PCIBIOS_SUCCESSFUL OK + * \ingroup IFX_PCIE_OS + */ +static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value) +{ + unsigned int data = 0; + int bus_number = bus->number; + static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; + int ret = PCIBIOS_SUCCESSFUL; + struct ifx_pci_controller *ctrl = bus->sysdata; + int pcie_port = ctrl->port; + + if (unlikely(size != 1 && size != 2 && size != 4)){ + ret = PCIBIOS_BAD_REGISTER_NUMBER; + goto out; + } + + /* Make sure the address is aligned to natural boundary */ + if (unlikely(((size - 1) & where))) { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + goto out; + } + + /* + * If we are second controller, we have to cheat OS so that it assume + * its bus number starts from 0 in host controller + */ + bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + /* + * PCIe only has a single device connected to it. It is + * always device ID 0. Don't bother doing reads for other + * device IDs on the first segment. + */ + if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) { + ret = PCIBIOS_FUNC_NOT_SUPPORTED; + goto out; + } + + if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { + *value = 0xffffffff; + ret = PCIBIOS_DEVICE_NOT_FOUND; + goto out; + } + + IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number, + PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); + + PCIE_IRQ_LOCK(ifx_pcie_lock); + if (bus_number == 0) { /* RC itself */ + unsigned int t; + + t = (where & ~3); + data = ifx_pcie_rc_cfg_rd(pcie_port, t); + IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n", + __func__, t, data); + } else { + unsigned int addr = pcie_bus_addr(bus_number, devfn, where); + + data = ifx_pcie_cfg_rd(pcie_port, addr); + if (pcie_port == IFX_PCIE_PORT0) { +#ifdef CONFIG_IFX_PCIE_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } else { +#ifdef CONFIG_IFX_PCIE1_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } + } + /* To get a correct PCI topology, we have to restore the bus number to OS */ + data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1); + + PCIE_IRQ_UNLOCK(ifx_pcie_lock); + IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n", + __func__, (data >> (8 * (where & 3))) & mask[size & 7], data); + + *value = (data >> (8 * (where & 3))) & mask[size & 7]; +out: + return ret; +} + +static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value) +{ + unsigned int shift; + unsigned int tdata = data; + + switch (size) { + case 1: + shift = (where & 0x3) << 3; + tdata &= ~(0xffU << shift); + tdata |= ((value & 0xffU) << shift); + break; + case 2: + shift = (where & 3) << 3; + tdata &= ~(0xffffU << shift); + tdata |= ((value & 0xffffU) << shift); + break; + case 4: + tdata = value; + break; + } + return tdata; +} + +/** + * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + * int where, int size, unsigned int value) + * \brief Write a value to PCI configuration space + * + * \param[in] bus Pointer to pci bus + * \param[in] devfn PCI device function number + * \param[in] where PCI register number + * \param[in] size The register size to be written + * \param[in] value The valule to be written + * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number + * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found + * \return PCIBIOS_SUCCESSFUL OK + * \ingroup IFX_PCIE_OS + */ +static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value) +{ + int bus_number = bus->number; + int ret = PCIBIOS_SUCCESSFUL; + struct ifx_pci_controller *ctrl = bus->sysdata; + int pcie_port = ctrl->port; + unsigned int tvalue = value; + unsigned int data; + + /* Make sure the address is aligned to natural boundary */ + if (unlikely(((size - 1) & where))) { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + goto out; + } + /* + * If we are second controller, we have to cheat OS so that it assume + * its bus number starts from 0 in host controller + */ + bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); + + /* + * We need to force the bus number to be zero on the root + * bus. Linux numbers the 2nd root bus to start after all + * busses on root 0. + */ + if (bus->parent == NULL) + bus_number = 0; + + if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { + ret = PCIBIOS_DEVICE_NOT_FOUND; + goto out; + } + + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__, + bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value); + + /* XXX, some PCIe device may need some delay */ + PCIE_IRQ_LOCK(ifx_pcie_lock); + + /* + * To configure the correct bus topology using native way, we have to cheat Os so that + * it can configure the PCIe hardware correctly. + */ + tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0); + + if (bus_number == 0) { /* RC itself */ + unsigned int t; + + t = (where & ~3); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value); + data = ifx_pcie_rc_cfg_rd(pcie_port, t); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data); + + data = ifx_pcie_size_to_value(where, size, data, tvalue); + + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data); + ifx_pcie_rc_cfg_wr(pcie_port, t, data); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n", + __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t)); + } else { + unsigned int addr = pcie_bus_addr(bus_number, devfn, where); + + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value); + data = ifx_pcie_cfg_rd(pcie_port, addr); + if (pcie_port == IFX_PCIE_PORT0) { +#ifdef CONFIG_IFX_PCIE_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } else { +#ifdef CONFIG_IFX_PCIE1_HW_SWAP + data = le32_to_cpu(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data); + + data = ifx_pcie_size_to_value(where, size, data, tvalue); + if (pcie_port == IFX_PCIE_PORT0) { +#ifdef CONFIG_IFX_PCIE_HW_SWAP + data = cpu_to_le32(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } else { +#ifdef CONFIG_IFX_PCIE1_HW_SWAP + data = cpu_to_le32(data); +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + } + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data); + ifx_pcie_cfg_wr(pcie_port, addr, data); + IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n", + __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr)); + } + PCIE_IRQ_UNLOCK(ifx_pcie_lock); +out: + return ret; +} + +static struct resource ifx_pcie_io_resource = { + .name = "PCIe0 I/O space", + .start = PCIE_IO_PHY_BASE, + .end = PCIE_IO_PHY_END, + .flags = IORESOURCE_IO, +}; + +static struct resource ifx_pcie_mem_resource = { + .name = "PCIe0 Memory space", + .start = PCIE_MEM_PHY_BASE, + .end = PCIE_MEM_PHY_END, + .flags = IORESOURCE_MEM, +}; + +static struct pci_ops ifx_pcie_ops = { + .read = ifx_pcie_read_config, + .write = ifx_pcie_write_config, +}; + +static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = { + { + .pcic = { + .pci_ops = &ifx_pcie_ops, + .mem_resource = &ifx_pcie_mem_resource, + .io_resource = &ifx_pcie_io_resource, + }, + .port = IFX_PCIE_PORT0, + }, +}; + +static inline void pcie_core_int_clear_all(int pcie_port) +{ + unsigned int reg; + reg = IFX_REG_R32(PCIE_IRNCR(pcie_port)); + reg &= PCIE_RC_CORE_COMBINED_INT; + IFX_REG_W32(reg, PCIE_IRNCR(pcie_port)); +} + +static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id) +{ + struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id; + int pcie_port = ctrl->port; + + IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq); + pcie_core_int_clear_all(pcie_port); + return IRQ_HANDLED; +} + +static int pcie_rc_core_int_init(int pcie_port) +{ + int ret; + + /* Enable core interrupt */ + IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port)); + + /* Clear it first */ + IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port)); + ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED, + pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]); + if (ret) + printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR); + + return ret; +} + +int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned int irq_bit = 0; + int irq = 0; + struct ifx_pci_controller *ctrl = dev->bus->sysdata; + int pcie_port = ctrl->port; + + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin); + + if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) { + printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin); + return -1; + } + /* Pin index so minus one */ + irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit; + irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq; + IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port)); + IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port)); + IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq); + return irq; +} + +/** + * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) + * \brief Called to perform platform specific PCI setup + * + * \param[in] dev The Linux PCI device structure for the device to map + * \return OK + * \ingroup IFX_PCIE_OS + */ +int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) +{ + u16 config; + unsigned int dconfig; + int pos; + /* Enable reporting System errors and parity errors on all devices */ + /* Enable parity checking and error reporting */ + pci_read_config_word(dev, PCI_COMMAND, &config); + config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE | + PCI_COMMAND_FAST_BACK*/; + pci_write_config_word(dev, PCI_COMMAND, config); + + if (dev->subordinate) { + /* Set latency timers on sub bridges */ + pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */ + /* More bridge error detection */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); + config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); + } + /* Enable the PCIe normal error reporting */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pos) { + /* Disable system error generation in response to error messages */ + pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config); + config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE); + pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config); + + /* Clear PCIE Capability's Device Status */ + pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config); + pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config); + + /* Update Device Control */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); + /* Correctable Error Reporting */ + config |= PCI_EXP_DEVCTL_CERE; + /* Non-Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_NFERE; + /* Fatal Error Reporting */ + config |= PCI_EXP_DEVCTL_FERE; + /* Unsupported Request */ + config |= PCI_EXP_DEVCTL_URRE; + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); + } + + /* Find the Advanced Error Reporting capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (pos) { + /* Clear Uncorrectable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig); + /* Enable reporting of all uncorrectable errors */ + /* Uncorrectable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); + /* + * Leave severity at HW default. This only controls if + * errors are reported as uncorrectable or + * correctable, not if the error is reported. + */ + /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ + /* Clear Correctable Error Status */ + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); + /* Enable reporting of all correctable errors */ + /* Correctable Error Mask - turned on bits disable errors */ + pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); + /* Advanced Error Capabilities */ + pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); + /* ECRC Generation Enable */ + if (dconfig & PCI_ERR_CAP_ECRC_GENC) + dconfig |= PCI_ERR_CAP_ECRC_GENE; + /* ECRC Check Enable */ + if (dconfig & PCI_ERR_CAP_ECRC_CHKC) + dconfig |= PCI_ERR_CAP_ECRC_CHKE; + pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); + + /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ + /* Enable Root Port's interrupt in response to error messages */ + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, + PCI_ERR_ROOT_CMD_COR_EN | + PCI_ERR_ROOT_CMD_NONFATAL_EN | + PCI_ERR_ROOT_CMD_FATAL_EN); + /* Clear the Root status register */ + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); + } + /* WAR, only 128 MRRS is supported, force all EPs to support this value */ + pcie_set_readrq(dev, 128); + return 0; +} + +static void pcie_phy_rst(int pcie_port) +{ + pcie_phy_rst_assert(pcie_port); + pcie_phy_rst_deassert(pcie_port); + /* Make sure PHY PLL is stable */ + udelay(20); +} + +static int pcie_rc_initialize(int pcie_port) +{ + int i; + + pcie_rcu_endian_setup(pcie_port); + + pcie_ep_gpio_rst_init(pcie_port); + + /* + * XXX, PCIe elastic buffer bug will cause not to be detected. One more + * reset PCIe PHY will solve this issue + */ + for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { + /* Disable PCIe PHY Analog part for sanity check */ + pcie_phy_pmu_disable(pcie_port); + pcie_phy_rst(pcie_port); + /* PCIe Core reset enabled, low active, sw programmed */ + pcie_core_rst_assert(pcie_port); + /* Put PCIe EP in reset status */ + pcie_device_rst_assert(pcie_port); + /* PCI PHY & Core reset disabled, high active, sw programmed */ + pcie_core_rst_deassert(pcie_port); + /* Already in a quiet state, program PLL, enable PHY, check ready bit */ + pcie_phy_clock_mode_setup(pcie_port); + /* Enable PCIe PHY and Clock */ + pcie_core_pmu_setup(pcie_port); + /* Clear status registers */ + pcie_status_register_clear(pcie_port); +#ifdef CONFIG_PCI_MSI + pcie_msi_init(pcie_port); +#endif /* CONFIG_PCI_MSI */ + pcie_rc_cfg_reg_setup(pcie_port); + + /* Once link is up, break out */ + if (pcie_app_loigc_setup(pcie_port) == 0) + break; + } + if (i >= IFX_PCIE_PHY_LOOP_CNT) { + printk(KERN_ERR "%s link up failed!!!!!\n", __func__); + return -EIO; + } + /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */ + pcie_replay_time_update(pcie_port); + return 0; +} + +static int inline ifx_pcie_startup_port_nr(void) +{ + int pcie_port = IFX_PCIE_PORT0; + + pcie_port = IFX_PCIE_PORT0; + return pcie_port; +} + +/** + * \fn static int __init ifx_pcie_bios_init(void) + * \brief Initialize the IFX PCIe controllers + * + * \return -EIO PCIe PHY link is not up + * \return -ENOMEM Configuration/IO space failed to map + * \return 0 OK + * \ingroup IFX_PCIE_OS + */ +extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev); +extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); +static int __devinit ltq_pcie_probe(struct platform_device *pdev) +{ + char ver_str[128] = {0}; + void __iomem *io_map_base; + int pcie_port; + int startup_port; + ltqpci_map_irq = ifx_pcie_bios_map_irq; + ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init; + /* Enable AHB Master/ Slave */ + pcie_ahb_pmu_setup(); + + startup_port = ifx_pcie_startup_port_nr(); + + ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset"); + + for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ + if (pcie_rc_initialize(pcie_port) == 0) { + /* Otherwise, warning will pop up */ + io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE); + if (io_map_base == NULL) + return -ENOMEM; + ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; + register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); + /* XXX, clear error status */ + pcie_rc_core_int_init(pcie_port); + } + } + + printk(KERN_INFO "%s", ver_str); +return 0; +} + +static struct platform_driver ltq_pcie_driver = { + .probe = ltq_pcie_probe, + .driver = { + .name = "pcie-xway", + .owner = THIS_MODULE, + }, +}; + +int __init pciebios_init(void) +{ + return platform_driver_register(<q_pcie_driver); +} + +arch_initcall(pciebios_init); diff --git a/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.h b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.h new file mode 100644 index 0000000000..d877c23a8a --- /dev/null +++ b/target/linux/lantiq/files-3.3/arch/mips/pci/pcie-lantiq.h @@ -0,0 +1,1305 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_pcie_reg.h +** PROJECT : IFX UEIP for VRX200 +** MODULES : PCIe module +** +** DATE : 02 Mar 2009 +** AUTHOR : Lei Chuanhua +** DESCRIPTION : PCIe Root Complex Driver +** COPYRIGHT : Copyright (c) 2009 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** HISTORY +** $Version $Date $Author $Comment +** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version +*******************************************************************************/ +#ifndef IFXMIPS_PCIE_REG_H +#define IFXMIPS_PCIE_REG_H +#include <linux/version.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +/*! + \file ifxmips_pcie_reg.h + \ingroup IFX_PCIE + \brief header file for PCIe module register definition +*/ +/* PCIe Address Mapping Base */ +#define PCIE_CFG_PHY_BASE 0x1D000000UL +#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) +#define PCIE_CFG_SIZE (8 * 1024 * 1024) + +#define PCIE_MEM_PHY_BASE 0x1C000000UL +#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) +#define PCIE_MEM_SIZE (16 * 1024 * 1024) +#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) + +#define PCIE_IO_PHY_BASE 0x1D800000UL +#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) +#define PCIE_IO_SIZE (1 * 1024 * 1024) +#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) + +#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) +#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) +#define PCIE_MSI_PHY_BASE 0x1F600000UL + +#define PCIE_PDI_PHY_BASE 0x1F106800UL +#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) +#define PCIE_PDI_SIZE 0x400 + +#define PCIE1_CFG_PHY_BASE 0x19000000UL +#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) +#define PCIE1_CFG_SIZE (8 * 1024 * 1024) + +#define PCIE1_MEM_PHY_BASE 0x18000000UL +#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) +#define PCIE1_MEM_SIZE (16 * 1024 * 1024) +#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) + +#define PCIE1_IO_PHY_BASE 0x19800000UL +#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) +#define PCIE1_IO_SIZE (1 * 1024 * 1024) +#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) + +#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) +#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) +#define PCIE1_MSI_PHY_BASE 0x1F400000UL + +#define PCIE1_PDI_PHY_BASE 0x1F700400UL +#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) +#define PCIE1_PDI_SIZE 0x400 + +#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) +#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) +#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) +#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) +#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) +#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) +#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) +#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) +#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) +#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) + +/* PCIe Application Logic Register */ +/* RC Core Control Register */ +#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) +/* This should be enabled after initializing configuratin registers + * Also should check link status retraining bit + */ +#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ + +/* RC Core Debug Register */ +#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) +#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ +#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ +#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 +#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ +#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 + +#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ +#define PCIE_RC_DR_PM_DEV_STATE_S 9 + +#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ +#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ +#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ + +/* Current Power State Definition */ +enum { + PCIE_RC_DR_D0 = 0, + PCIE_RC_DR_D1, /* Not supported */ + PCIE_RC_DR_D2, /* Not supported */ + PCIE_RC_DR_D3, + PCIE_RC_DR_UN, +}; + +/* PHY Link Status Register */ +#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) +#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ + +/* Electromechanical Control Register */ +#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) +#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ +#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ +#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ +#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ +#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ +#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ +#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ +#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ + +/* Interrupt Status Register */ +#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) +#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ +#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ +#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ +#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ +#define PCIE_IR_SR_AHB_LU_ERR_S 4 +#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ +#define PCIE_IR_SR_INT_MSG_NUM_S 9 +#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ +#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 + +/* Message Control Register */ +#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) +#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ +#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ + +#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) + +/* Vendor-Defined Message Requester ID Register */ +#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) +#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF +#define PCIE_VDM_RID_VDMRID_S 0 + +/* ASPM Control Register */ +#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) +#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ +#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ +#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ + +/* Vendor Message DW0 Register */ +#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) +#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ +#define PCIE_VM_MSG_DW0_TYPE_S 0 +#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ +#define PCIE_VM_MSG_DW0_FORMAT_S 5 +#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ +#define PCIE_VM_MSG_DW0_TC_S 12 +#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ +#define PCIE_VM_MSG_DW0_ATTR_S 18 +#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ +#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ +#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ +#define PCIE_VM_MSG_DW0_LEN_S 22 + +/* Format Definition */ +enum { + PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ + PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ + PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ + PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ +}; + +/* Traffic Class Definition */ +enum { + PCIE_VM_MSG_TC0 = 0, + PCIE_VM_MSG_TC1, + PCIE_VM_MSG_TC2, + PCIE_VM_MSG_TC3, + PCIE_VM_MSG_TC4, + PCIE_VM_MSG_TC5, + PCIE_VM_MSG_TC6, + PCIE_VM_MSG_TC7, +}; + +/* Attributes Definition */ +enum { + PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ + PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ + PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ + PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ +}; + +/* Payload Size Definition */ +#define PCIE_VM_MSG_LEN_MIN 0 +#define PCIE_VM_MSG_LEN_MAX 1024 + +/* Vendor Message DW1 Register */ +#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) +#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ +#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 +#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ +#define PCIE_VM_MSG_DW1_CODE_S 16 +#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ +#define PCIE_VM_MSG_DW1_TAG_S 24 + +#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) +#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) + +/* Vendor Message Request Register */ +#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) +#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ + + +/* AHB Slave Side Band Control Register */ +#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) +#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ +#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ +#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ +#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ +#define PCIE_AHB_SSB_REQ_ATTR_S 3 +#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ +#define PCIE_AHB_SSB_REQ_TC_S 5 + +/* AHB Master SideBand Ctrl Register */ +#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) +#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ +#define PCIE_AHB_MSB_RESP_ATTR_S 0 +#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ +#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ +#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ +#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ +#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ +#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 + +/* AHB Control Register, fixed bus enumeration exception */ +#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) +#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 + +/* Interrupt Enalbe Register */ +#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) +#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) +#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) + +/* PCIe interrupt enable/control/capture register definition */ +#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ +#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ +#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ +#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ +#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ +#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ +#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ +#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ +#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ +#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ +#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ +#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ +#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ +#define PCIE_IRN_INTA 0x00002000 /* INTA */ +#define PCIE_IRN_INTB 0x00004000 /* INTB */ +#define PCIE_IRN_INTC 0x00008000 /* INTC */ +#define PCIE_IRN_INTD 0x00010000 /* INTD */ +#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ + +#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ + PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ + PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ + PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ + PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) +/* PCIe RC Configuration Register */ +#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) + +/* Bit definition from pci_reg.h */ +#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) +#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) +#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ +/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ +#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ +#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ + +#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ +/* Bus Number Register bits */ +#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF +#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 +#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 +#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 +#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 +#define PCIE_PNR_SUB_BUS_NUM_S 16 + +/* IO Base/Limit Register bits */ +#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ +#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 +#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 +#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 +#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 +#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 +#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 + +/* Non-prefetchable Memory Base/Limit Register bit */ +#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ +#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 +#define PCIE_MBML_MEM_BASE_ADDR_S 4 +#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 +#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 + +/* Prefetchable Memory Base/Limit Register bit */ +#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ +#define PCIE_PMBL_64BIT_ADDR 0x00000001 +#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 +#define PCIE_PMBL_UPPER_12BIT_S 4 +#define PCIE_PMBL_E64MA 0x00010000 +#define PCIE_PMBL_END_ADDR 0xFFF00000 +#define PCIE_PMBL_END_ADDR_S 20 +#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ +#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ + +/* I/O Base/Limit Upper 16 bits register */ +#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ +#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF +#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 +#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 +#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 + +#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) +#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) + +/* Interrupt and Secondary Bridge Control Register */ +#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) + +#define PCIE_INTRBCTRL_INT_LINE 0x000000FF +#define PCIE_INTRBCTRL_INT_LINE_S 0 +#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 +#define PCIE_INTRBCTRL_INT_PIN_S 8 +#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ +#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ +#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ +#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ +#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ +#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ +/* Others are read only */ +enum { + PCIE_INTRBCTRL_INT_NON = 0, + PCIE_INTRBCTRL_INTA, + PCIE_INTRBCTRL_INTB, + PCIE_INTRBCTRL_INTC, + PCIE_INTRBCTRL_INTD, +}; + +#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) + +/* Power Management Control and Status Register */ +#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) + +#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ +#define PCIE_PM_CSR_POWER_STATE_S 0 +#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ +#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ +#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ + +/* MSI Capability Register for EP */ +#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) + +#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ +#define PCIE_MCAPR_MSI_CAP_ID_S 0 +#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ +#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 +#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ +#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ +#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 +#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ +#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 +#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ + +/* MSI Message Address Register */ +#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) + +#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ + +/* MSI Message Upper Address Register */ +#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) + +/* MSI Message Data Register */ +#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) + +#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ +#define PCIE_MD_DATA_S 0 + +/* PCI Express Capability Register */ +#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) + +#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ +#define PCIE_XCAP_ID_S 0 +#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ +#define PCIE_XCAP_NEXT_CAP_S 8 +#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ +#define PCIE_XCAP_VER_S 16 +#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ +#define PCIE_XCAP_DEV_PORT_TYPE_S 20 +#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ +#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ +#define PCIE_XCAP_MSG_INT_NUM_S 25 + +/* Device Capability Register */ +#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) + +#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ +#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 +#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ +#define PCIE_DCAP_PHANTOM_FUNC_S 3 +#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ +#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ +#define PCIE_DCAP_EP_L0S_LATENCY_S 6 +#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ +#define PCIE_DCAP_EP_L1_LATENCY_S 9 +#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ + +/* Maximum payload size supported */ +enum { + PCIE_MAX_PAYLOAD_128 = 0, + PCIE_MAX_PAYLOAD_256, + PCIE_MAX_PAYLOAD_512, + PCIE_MAX_PAYLOAD_1024, + PCIE_MAX_PAYLOAD_2048, + PCIE_MAX_PAYLOAD_4096, +}; + +/* Device Control and Status Register */ +#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) + +#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ +#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ +#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ +#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ +#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ +#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ +#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 +#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ +#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ +#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ +#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ +#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ +#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 +#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ +#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ +#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ +#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ +#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ +#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ + +#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ + PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ + PCIE_DCTLSYS_UR_REQ_EN) + +/* Link Capability Register */ +#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) +#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ +#define PCIE_LCAP_MAX_LINK_SPEED_S 0 +#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ +#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 +#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ +#define PCIE_LCAP_ASPM_LEVEL_S 10 +#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ +#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 +#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ +#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 +#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ +#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ +#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ +#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ +#define PCIE_LCAP_PORT_NUM_S 24 + +/* Maximum Length width definition */ +#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 +#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ +#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 +#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 +#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 +#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C +#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 +#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 + +/* Active State Link PM definition */ +enum { + PCIE_ASPM_RES0 = 0, + PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ + PCIE_ASPM_RES1, + PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ +}; + +/* L0s Exit Latency definition */ +enum { + PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ + PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ + PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ + PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ + PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ + PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ + PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ + PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ +}; + +/* L1 Exit Latency definition */ +enum { + PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ + PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ + PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ + PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ + PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ + PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ + PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ + PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ +}; + +/* Link Control and Status Register */ +#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) +#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ +#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 +#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ +#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ +#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ +#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ +#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ +#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ +#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ +#define PCIE_LCTLSTS_LINK_SPEED_S 16 +#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ +#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 +#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ +#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ +#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ + +/* Slot Capabilities Register */ +#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) + +/* Slot Capabilities */ +#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) + +/* Root Control and Capability Register */ +#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) +#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ +#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ +#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ +#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ +#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ + PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) +/* Root Status Register */ +#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) +#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ +#define PCIE_RSTS_PME_REQ_ID_S 0 +#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ +#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ + +/* PCI Express Enhanced Capability Header */ +#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) +#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ +#define PCIE_ENHANCED_CAP_ID_S 0 +#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ +#define PCIE_ENHANCED_CAP_VER_S 16 +#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ +#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 + +/* Uncorrectable Error Status Register */ +#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) +#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ +#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ +#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ +#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ +#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ +#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ +#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ +#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ +#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ +#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ +#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ +#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ + PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ + PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ + PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) + +/* Uncorrectable Error Mask Register, Mask means no report */ +#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) + +/* Uncorrectable Error Severity Register */ +#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) + +/* Correctable Error Status Register */ +#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) +#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ +#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ +#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ +#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ +#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ + PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) + +/* Correctable Error Mask Register */ +#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) + +/* Advanced Error Capabilities and Control Register */ +#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) +#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ +#define PCIE_AECCR_FIRST_ERR_PTR_S 0 +#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ +#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ +#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ +#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ + +/* Header Log Register 1 */ +#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) + +/* Header Log Register 2 */ +#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) + +/* Header Log Register 3 */ +#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) + +/* Header Log Register 4 */ +#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) + +/* Root Error Command Register */ +#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) +#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ +#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ +#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ +#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ + PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) + +/* Root Error Status Register */ +#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) +#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ +#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ +#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ +#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ +#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ +#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ +#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ +#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ +#define PCIE_RESR_AER_INT_MSG_NUM_S 27 + +/* Error Source Indentification Register */ +#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) +#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF +#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 +#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 +#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 + +/* VC Enhanced Capability Header */ +#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) + +/* Port VC Capability Register */ +#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) +#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ +#define PCIE_PVC1_EXT_VC_CNT_S 0 +#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ +#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 +#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ +#define PCIE_PVC1_REF_CLK_S 8 +#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ +#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 + +/* Extended Virtual Channel Count Defintion */ +#define PCIE_EXT_VC_CNT_MIN 0 +#define PCIE_EXT_VC_CNT_MAX 7 + +/* Port Arbitration Table Entry Size Definition */ +enum { + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, + PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, +}; + +/* Port VC Capability Register 2 */ +#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) +#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ +#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ +#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ +#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ +#define PCIE_PVC2_VC_ARB_WRR 0x0000000F +#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ +#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 + +/* Port VC Control and Status Register */ +#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) +#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ +#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ +#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 +#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ + +/* VC0 Resource Capability Register */ +#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) +#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ +#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ +#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ + PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ + PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) + +#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ +#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ +#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 +#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ +#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 + +/* VC0 Resource Control Register */ +#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) +#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ +#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ +#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ +#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ +#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ +#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ +#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ +#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ +#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ + +#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ +#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ +#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 +#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ +#define PCIE_VC0_RC0_VC_ID_S 24 +#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ + +/* VC0 Resource Status Register */ +#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) +#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ +#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ + +/* Ack Latency Timer and Replay Timer Register */ +#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) +#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ +#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 +#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ +#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 + +/* Other Message Register */ +#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) + +/* Port Force Link Register */ +#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) +#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ +#define PCIE_PFLR_LINK_NUM_S 0 +#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ +#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ +#define PCIE_PFLR_LINK_STATE_S 16 +#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ +#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 + +/* Ack Frequency Register */ +#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) +#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ +#define PCIE_AFR_AF_S 0 +#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ +#define PCIE_AFR_FTS_NUM_S 8 +#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ +#define PCIE_AFR_COM_FTS_NUM_S 16 +#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ +#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 +#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ +#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 +#define PCIE_AFR_FTS_NUM_DEFAULT 32 +#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 +#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 + +/* Port Link Control Register */ +#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) +#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ +#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ +#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ +#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ +#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ +#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ +#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ +#define PCIE_PLCR_LINK_MODE_S 16 +#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ + +/* Lane Skew Register */ +#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) +#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ +#define PCIE_LSR_LANE_SKEW_NUM_S 0 +#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ +#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ +#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ + +/* Symbol Number Register */ +#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) +#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ +#define PCIE_SNR_TS_S 0 +#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ +#define PCIE_SNR_SKP_S 8 +#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ +#define PCIE_SNR_REPLAY_TIMER_S 14 +#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ +#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 +#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ +#define PCIE_SNR_FC_TIMER_S 28 + +/* Symbol Timer Register and Filter Mask Register 1 */ +#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) +#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ +#define PCIE_STRFMR_SKP_INTERVAL_S 0 +#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ +#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ +#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ +#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ +#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ +#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ +#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ +#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ +#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ +#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ +#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ +#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ +#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ +#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ + +#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ + +/* Filter Masker Register 2 */ +#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) +#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ +#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ + +/* Debug Register 0 */ +#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) + +/* Debug Register 1 */ +#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) + +/* Transmit Posted FC Credit Status Register */ +#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) +#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ +#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 +#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ +#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 + +/* Transmit Non-Posted FC Credit Status */ +#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) +#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ +#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 +#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ +#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 + +/* Transmit Complete FC Credit Status Register */ +#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) +#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ +#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 +#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ +#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 + +/* Queue Status Register */ +#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) +#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ +#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ +#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ + +/* VC Transmit Arbitration Register 1 */ +#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) +#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ +#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ +#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ +#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ + +/* VC Transmit Arbitration Register 2 */ +#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) +#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ +#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ +#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ +#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ + +/* VC0 Posted Receive Queue Control Register */ +#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) +#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ +#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 +#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ +#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 +#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ +#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 +#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ +#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ + +/* VC0 Non-Posted Receive Queue Control */ +#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) +#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ +#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 +#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ +#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 +#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ +#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 + +/* VC0 Completion Receive Queue Control */ +#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) +#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ +#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 +#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ +#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 +#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ +#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 + +/* Applicable to the above three registers */ +enum { + PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, + PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, + PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, +}; + +/* VC0 Posted Buffer Depth Register */ +#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) +#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ +#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 +#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ +#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 + +/* VC0 Non-Posted Buffer Depth Register */ +#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) +#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ +#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 +#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ +#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 + +/* VC0 Completion Buffer Depth Register */ +#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) +#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ +#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 +#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ +#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 + +/* PHY Status Register, all zeros in VR9 */ +#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) + +/* PHY Control Register, all zeros in VR9 */ +#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) + +/* + * PCIe PDI PHY register definition, suppose all the following + * stuff is confidential. + * XXX, detailed bit definition + */ +#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) +#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) +#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) +#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) +#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) +#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) +#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) +#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) +#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) +#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) +#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) + +#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) +#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) +#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) +#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) +#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) +#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) +#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) +#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) + +#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) +#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) +#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) +#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) +#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) +#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) +#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) + +#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) +#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) +#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) +#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) +#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) + +/* Interrupt related stuff */ +#define PCIE_LEGACY_DISABLE 0 +#define PCIE_LEGACY_INTA 1 +#define PCIE_LEGACY_INTB 2 +#define PCIE_LEGACY_INTC 3 +#define PCIE_LEGACY_INTD 4 +#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD + +#define PCIE_IRQ_LOCK(lock) do { \ + unsigned long flags; \ + spin_lock_irqsave(&(lock), flags); +#define PCIE_IRQ_UNLOCK(lock) \ + spin_unlock_irqrestore(&(lock), flags); \ +} while (0) + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) +#define IRQF_SHARED SA_SHIRQ +#endif + +#define PCIE_MSG_MSI 0x00000001 +#define PCIE_MSG_ISR 0x00000002 +#define PCIE_MSG_FIXUP 0x00000004 +#define PCIE_MSG_READ_CFG 0x00000008 +#define PCIE_MSG_WRITE_CFG 0x00000010 +#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) +#define PCIE_MSG_REG 0x00000020 +#define PCIE_MSG_INIT 0x00000040 +#define PCIE_MSG_ERR 0x00000080 +#define PCIE_MSG_PHY 0x00000100 +#define PCIE_MSG_ANY 0x000001ff + +#define IFX_PCIE_PORT0 0 +#define IFX_PCIE_PORT1 1 + +#ifdef CONFIG_IFX_PCIE_2ND_CORE +#define IFX_PCIE_CORE_NR 2 +#else +#define IFX_PCIE_CORE_NR 1 +#endif + +//#define IFX_PCIE_ERROR_INT + +//#define IFX_PCIE_DBG + +#if defined(IFX_PCIE_DBG) +#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ + if (g_pcie_debug_flag & (_m)) { \ + ifx_pcie_debug((_fmt), ##args); \ + } \ +} while (0) + +#define INLINE +#else +#define IFX_PCIE_PRINT(_m, _fmt, args...) \ + do {} while(0) +#define INLINE inline +#endif + +struct ifx_pci_controller { + struct pci_controller pcic; + + /* RC specific, per host bus information */ + u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ +}; + +typedef struct ifx_pcie_ir_irq { + const unsigned int irq; + const char name[16]; +}ifx_pcie_ir_irq_t; + +typedef struct ifx_pcie_legacy_irq{ + const u32 irq_bit; + const int irq; +}ifx_pcie_legacy_irq_t; + +typedef struct ifx_pcie_irq { + ifx_pcie_ir_irq_t ir_irq; + ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; +}ifx_pcie_irq_t; + +extern u32 g_pcie_debug_flag; +extern void ifx_pcie_debug(const char *fmt, ...); +extern void pcie_phy_clock_mode_setup(int pcie_port); +extern void pcie_msi_pic_init(int pcie_port); +extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); +extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); + + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/clk.h> + +#include <lantiq_soc.h> + +#define IFX_PCIE_GPIO_RESET 38 +#define IFX_REG_R32 ltq_r32 +#define IFX_REG_W32 ltq_w32 +#define CONFIG_IFX_PCIE_HW_SWAP +#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) +#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) +#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ + +#define IFX_RCU (KSEG1 | 0x1F203000) +#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ +#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ +#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ +#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE + +#define IFX_PMU1_MODULE_PCIE_PHY (0) +#define IFX_PMU1_MODULE_PCIE_CTRL (1) +#define IFX_PMU1_MODULE_PDI (4) +#define IFX_PMU1_MODULE_MSI (5) + +#define IFX_PMU_MODULE_PCIE_L0_CLK (31) + + +static inline void pcie_ep_gpio_rst_init(int pcie_port) +{ +} + +static inline void pcie_ahb_pmu_setup(void) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "ahb"); + clk_enable(clk); + //ltq_pmu_enable(PMU_AHBM | PMU_AHBS); +} + +static inline void pcie_rcu_endian_setup(int pcie_port) +{ + u32 reg; + + reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); +#ifdef CONFIG_IFX_PCIE_HW_SWAP + reg |= IFX_RCU_AHB_BE_PCIE_M; + reg |= IFX_RCU_AHB_BE_PCIE_S; + reg &= ~IFX_RCU_AHB_BE_XBAR_M; +#else + reg |= IFX_RCU_AHB_BE_PCIE_M; + reg &= ~IFX_RCU_AHB_BE_PCIE_S; + reg &= ~IFX_RCU_AHB_BE_XBAR_M; +#endif /* CONFIG_IFX_PCIE_HW_SWAP */ + IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); + IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); +} + +static inline void pcie_phy_pmu_enable(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "phy"); + clk_enable(clk); + //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY); +} + +static inline void pcie_phy_pmu_disable(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "phy"); + clk_disable(clk); + //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY); +} + +static inline void pcie_pdi_big_endian(int pcie_port) +{ + u32 reg; + + /* SRAM2PDI endianness control. */ + reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); + /* Config AHB->PCIe and PDI endianness */ + reg |= IFX_RCU_AHB_BE_PCIE_PDI; + IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); +} + +static inline void pcie_pdi_pmu_enable(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "pdi"); + clk_enable(clk); + //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI); +} + +static inline void pcie_core_rst_assert(int pcie_port) +{ + u32 reg; + + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + + /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ + reg |= 0x00400000; + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_core_rst_deassert(int pcie_port) +{ + u32 reg; + + /* Make sure one micro-second delay */ + udelay(1); + + /* Reset PCIe PHY & Core, bit 22 */ + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + reg &= ~0x00400000; + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_phy_rst_assert(int pcie_port) +{ + u32 reg; + + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + reg |= 0x00001000; /* Bit 12 */ + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_phy_rst_deassert(int pcie_port) +{ + u32 reg; + + /* Make sure one micro-second delay */ + udelay(1); + + reg = IFX_REG_R32(IFX_RCU_RST_REQ); + reg &= ~0x00001000; /* Bit 12 */ + IFX_REG_W32(reg, IFX_RCU_RST_REQ); +} + +static inline void pcie_device_rst_assert(int pcie_port) +{ + gpio_set_value(IFX_PCIE_GPIO_RESET, 0); + // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +} + +static inline void pcie_device_rst_deassert(int pcie_port) +{ + mdelay(100); + gpio_set_value(IFX_PCIE_GPIO_RESET, 1); +// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +} + +static inline void pcie_core_pmu_setup(int pcie_port) +{ + struct clk *clk; + clk = clk_get_sys("ltq_pcie", "ctl"); + clk_enable(clk); + clk = clk_get_sys("ltq_pcie", "bus"); + clk_enable(clk); + + //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL); + //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK); +} + +static inline void pcie_msi_init(int pcie_port) +{ + struct clk *clk; + pcie_msi_pic_init(pcie_port); + clk = clk_get_sys("ltq_pcie", "msi"); + clk_enable(clk); + //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI); +} + +static inline u32 +ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) +{ + u32 tbus_number = bus_number; + +#ifdef CONFIG_IFX_PCI + if (pcibios_host_nr() > 1) { + tbus_number -= pcibios_1st_host_bus_nr(); + } +#endif /* CONFIG_IFX_PCI */ + return tbus_number; +} + +static inline u32 +ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) +{ + struct pci_dev *pdev; + u32 tvalue = value; + + /* Sanity check */ + pdev = pci_get_slot(bus, devfn); + if (pdev == NULL) { + return tvalue; + } + + /* Only care about PCI bridge */ + if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { + return tvalue; + } + + if (read) { /* Read hack */ + #ifdef CONFIG_IFX_PCI + if (pcibios_host_nr() > 1) { + tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); + } + #endif /* CONFIG_IFX_PCI */ + } + else { /* Write hack */ + #ifdef CONFIG_IFX_PCI + if (pcibios_host_nr() > 1) { + tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); + } + #endif + } + return tvalue; +} + +#endif /* IFXMIPS_PCIE_VR9_H */ + diff --git a/target/linux/lantiq/files-3.3/drivers/i2c/busses/i2c-falcon.c b/target/linux/lantiq/files-3.3/drivers/i2c/busses/i2c-falcon.c new file mode 100644 index 0000000000..f97ddb601a --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/i2c/busses/i2c-falcon.c @@ -0,0 +1,1040 @@ +/* + * Lantiq FALC(tm) ON - I2C bus adapter + * + * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + */ + +/* + * CURRENT ISSUES: + * - no high speed support + * - supports only master mode + * - ten bit mode is not tested (no slave devices) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/gpio.h> + +#include <lantiq_soc.h> + +/* I2C Identification Register */ +/* Module ID */ +#define I2C_ID_ID_MASK 0x0000FF00 +/* field offset */ +#define I2C_ID_ID_OFFSET 8 +/* Revision */ +#define I2C_ID_REV_MASK 0x000000FF +/* field offset */ +#define I2C_ID_REV_OFFSET 0 + +/* I2C Error Interrupt Request Source Status Register */ +/* TXF_OFL */ +#define I2C_ERR_IRQSS_TXF_OFL 0x00000008 +/* TXF_UFL */ +#define I2C_ERR_IRQSS_TXF_UFL 0x00000004 +/* RXF_OFL */ +#define I2C_ERR_IRQSS_RXF_OFL 0x00000002 +/* RXF_UFL */ +#define I2C_ERR_IRQSS_RXF_UFL 0x00000001 + +/* I2C Bus Status Register */ +/* Bus Status */ +#define I2C_BUS_STAT_BS_MASK 0x00000003 +/* I2C Bus is free. */ +#define I2C_BUS_STAT_BS_FREE 0x00000000 +/* + * The device is working as master and has claimed the control + * on the I2C-bus (busy master). + */ +#define I2C_BUS_STAT_BS_BM 0x00000002 + +/* I2C Interrupt Clear Register */ +/* Clear */ +#define I2C_ICR_BREQ_INT_CLR 0x00000008 +/* Clear */ +#define I2C_ICR_LBREQ_INT_CLR 0x00000004 + +/* I2C RUN Control Register */ +/* Enable */ +#define I2C_RUN_CTRL_RUN_EN 0x00000001 + +/* I2C Kernel Clock Control Register */ +/* field offset */ +#define I2C_CLC_RMC_OFFSET 8 +/* Enable */ +#define I2C_IMSC_I2C_P_INT_EN 0x00000020 +/* Enable */ +#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010 +/* Enable */ +#define I2C_IMSC_BREQ_INT_EN 0x00000008 +/* Enable */ +#define I2C_IMSC_LBREQ_INT_EN 0x00000004 + +/* I2C Fractional Divider Configuration Register */ +/* field offset */ +#define I2C_FDIV_CFG_INC_OFFSET 16 +/* field offset */ +#define I2C_FDIV_CFG_DEC_OFFSET 0 + +/* I2C Fractional Divider (highspeed mode) Configuration Register */ +/* field offset */ +#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16 +/* field offset */ +#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0 + +/* I2C Address Register */ +/* Enable */ +#define I2C_ADDR_CFG_SOPE_EN 0x00200000 +/* Enable */ +#define I2C_ADDR_CFG_SONA_EN 0x00100000 +/* Enable */ +#define I2C_ADDR_CFG_MnS_EN 0x00080000 + +/* I2C Protocol Interrupt Request Source Status Register */ +/* RX */ +#define I2C_P_IRQSS_RX 0x00000040 +/* TX_END */ +#define I2C_P_IRQSS_TX_END 0x00000020 +/* NACK */ +#define I2C_P_IRQSS_NACK 0x00000010 +/* AL */ +#define I2C_P_IRQSS_AL 0x00000008 + +/* I2C Raw Interrupt Status Register */ +/* Read: Interrupt occurred. */ +#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020 +/* Read: Interrupt occurred. */ +#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010 + +/* I2C End Data Control Register */ +/* + * Set End of Transmission - Note: Do not write '1' to this bit when bus is + * free. This will cause an abort after the first byte when a new transfer + * is started. + */ +#define I2C_ENDD_CTRL_SETEND 0x00000002 +/* TX FIFO Flow Control */ +#define I2C_FIFO_CFG_TXFC 0x00020000 +/* RX FIFO Flow Control */ +#define I2C_FIFO_CFG_RXFC 0x00010000 +/* Word aligned (character alignment of four characters) */ +#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000 +/* Word aligned (character alignment of four characters) */ +#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200 +/* 1 word */ +#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000 +/* 1 word */ +#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000 + + +/* I2C register structure */ +struct gpon_reg_i2c { + /* I2C Kernel Clock Control Register */ + unsigned int clc; /* 0x00000000 */ + /* Reserved */ + unsigned int res_0; /* 0x00000004 */ + /* I2C Identification Register */ + unsigned int id; /* 0x00000008 */ + /* Reserved */ + unsigned int res_1; /* 0x0000000C */ + /* + * I2C RUN Control Register - This register enables and disables the I2C + * peripheral. Before enabling, the I2C has to be configured properly. + * After enabling no configuration is possible + */ + unsigned int run_ctrl; /* 0x00000010 */ + /* + * I2C End Data Control Register - This register is used to either turn + * around the data transmission direction or to address another slave + * without sending a stop condition. Also the software can stop the + * slave-transmitter by sending a not-accolade when working as + * master-receiver or even stop data transmission immediately when + * operating as master-transmitter. The writing to the bits of this + * control register is only effective when in MASTER RECEIVES BYTES, + * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state + */ + unsigned int endd_ctrl; /* 0x00000014 */ + /* + * I2C Fractional Divider Configuration Register - These register is + * used to program the fractional divider of the I2C bus. Before the + * peripheral is switched on by setting the RUN-bit the two (fixed) + * values for the two operating frequencies are programmed into these + * (configuration) registers. The Register FDIV_HIGH_CFG has the same + * layout as I2C_FDIV_CFG. + */ + unsigned int fdiv_cfg; /* 0x00000018 */ + /* + * I2C Fractional Divider (highspeed mode) Configuration Register + * These register is used to program the fractional divider of the I2C + * bus. Before the peripheral is switched on by setting the RUN-bit the + * two (fixed) values for the two operating frequencies are programmed + * into these (configuration) registers. The Register FDIV_CFG has the + * same layout as I2C_FDIV_CFG. + */ + unsigned int fdiv_high_cfg; /* 0x0000001C */ + /* I2C Address Configuration Register */ + unsigned int addr_cfg; /* 0x00000020 */ + /* + * I2C Bus Status Register - This register gives a status information + * of the I2C. This additional information can be used by the software + * to start proper actions. + */ + unsigned int bus_stat; /* 0x00000024 */ + /* I2C FIFO Configuration Register */ + unsigned int fifo_cfg; /* 0x00000028 */ + /* I2C Maximum Received Packet Size Register */ + unsigned int mrps_ctrl; /* 0x0000002C */ + /* I2C Received Packet Size Status Register */ + unsigned int rps_stat; /* 0x00000030 */ + /* I2C Transmit Packet Size Register */ + unsigned int tps_ctrl; /* 0x00000034 */ + /* I2C Filled FIFO Stages Status Register */ + unsigned int ffs_stat; /* 0x00000038 */ + /* Reserved */ + unsigned int res_2; /* 0x0000003C */ + /* I2C Timing Configuration Register */ + unsigned int tim_cfg; /* 0x00000040 */ + /* Reserved */ + unsigned int res_3[7]; /* 0x00000044 */ + /* I2C Error Interrupt Request Source Mask Register */ + unsigned int err_irqsm; /* 0x00000060 */ + /* I2C Error Interrupt Request Source Status Register */ + unsigned int err_irqss; /* 0x00000064 */ + /* I2C Error Interrupt Request Source Clear Register */ + unsigned int err_irqsc; /* 0x00000068 */ + /* Reserved */ + unsigned int res_4; /* 0x0000006C */ + /* I2C Protocol Interrupt Request Source Mask Register */ + unsigned int p_irqsm; /* 0x00000070 */ + /* I2C Protocol Interrupt Request Source Status Register */ + unsigned int p_irqss; /* 0x00000074 */ + /* I2C Protocol Interrupt Request Source Clear Register */ + unsigned int p_irqsc; /* 0x00000078 */ + /* Reserved */ + unsigned int res_5; /* 0x0000007C */ + /* I2C Raw Interrupt Status Register */ + unsigned int ris; /* 0x00000080 */ + /* I2C Interrupt Mask Control Register */ + unsigned int imsc; /* 0x00000084 */ + /* I2C Masked Interrupt Status Register */ + unsigned int mis; /* 0x00000088 */ + /* I2C Interrupt Clear Register */ + unsigned int icr; /* 0x0000008C */ + /* I2C Interrupt Set Register */ + unsigned int isr; /* 0x00000090 */ + /* I2C DMA Enable Register */ + unsigned int dmae; /* 0x00000094 */ + /* Reserved */ + unsigned int res_6[8154]; /* 0x00000098 */ + /* I2C Transmit Data Register */ + unsigned int txd; /* 0x00008000 */ + /* Reserved */ + unsigned int res_7[4095]; /* 0x00008004 */ + /* I2C Receive Data Register */ + unsigned int rxd; /* 0x0000C000 */ + /* Reserved */ + unsigned int res_8[4095]; /* 0x0000C004 */ +}; + +/* mapping for access macros */ +#define i2c ((struct gpon_reg_i2c *)priv->membase) +#define reg_r32(reg) __raw_readl(reg) +#define reg_w32(val, reg) __raw_writel(val, reg) +#define reg_w32_mask(clear, set, reg) \ + reg_w32((reg_r32(reg) & ~(clear)) | (set), reg) +#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)®)[idx]) +#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)®)[idx]) + +#define i2c_r32(reg) reg_r32(&i2c->reg) +#define i2c_w32(val, reg) reg_w32(val, &i2c->reg) +#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg) + +#define DRV_NAME "i2c-falcon" +#define DRV_VERSION "1.01" + +#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */ + +#ifdef DEBUG +#define FALCON_I2C_XFER_TIMEOUT (25 * HZ) +#else +#define FALCON_I2C_XFER_TIMEOUT HZ +#endif +#if defined(DEBUG) && 0 +#define PRINTK(arg...) pr_info(arg) +#else +#define PRINTK(arg...) do {} while (0) +#endif + +#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ + I2C_IMSC_I2C_ERR_INT_EN) + +#define FALCON_I2C_ARB_LOST (1 << 0) +#define FALCON_I2C_NACK (1 << 1) +#define FALCON_I2C_RX_UFL (1 << 2) +#define FALCON_I2C_RX_OFL (1 << 3) +#define FALCON_I2C_TX_UFL (1 << 4) +#define FALCON_I2C_TX_OFL (1 << 5) + +struct falcon_i2c { + struct mutex mutex; + + enum { + FALCON_I2C_MODE_100 = 1, + FALCON_I2C_MODE_400 = 2, + FALCON_I2C_MODE_3400 = 3 + } mode; /* current speed mode */ + + struct clk *clk; /* clock input for i2c hardware block */ + struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */ + int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error, + protocol IRQs */ + + struct i2c_adapter adap; + struct device *dev; + + struct completion cmd_complete; + + /* message transfer data */ + /* current message */ + struct i2c_msg *current_msg; + /* number of messages to handle */ + int msgs_num; + /* current buffer */ + u8 *msg_buf; + /* remaining length of current buffer */ + u32 msg_buf_len; + /* error status of the current transfer */ + int msg_err; + + /* master status codes */ + enum { + STATUS_IDLE, + STATUS_ADDR, /* address phase */ + STATUS_WRITE, + STATUS_READ, + STATUS_READ_END, + STATUS_STOP + } status; +}; + +static irqreturn_t falcon_i2c_isr(int irq, void *dev_id); + +static inline void enable_burst_irq(struct falcon_i2c *priv) +{ + i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); +} +static inline void disable_burst_irq(struct falcon_i2c *priv) +{ + i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); +} + +static void prepare_msg_send_addr(struct falcon_i2c *priv) +{ + struct i2c_msg *msg = priv->current_msg; + int rd = !!(msg->flags & I2C_M_RD); + u16 addr = msg->addr; + + /* new i2c_msg */ + priv->msg_buf = msg->buf; + priv->msg_buf_len = msg->len; + if (rd) + priv->status = STATUS_READ; + else + priv->status = STATUS_WRITE; + + /* send slave address */ + if (msg->flags & I2C_M_TEN) { + i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); + i2c_w32(addr & 0xff, txd); + } else + i2c_w32((addr & 0x7f) << 1 | rd, txd); +} + +static void set_tx_len(struct falcon_i2c *priv) +{ + struct i2c_msg *msg = priv->current_msg; + int len = (msg->flags & I2C_M_TEN) ? 2 : 1; + + PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T')); + + priv->status = STATUS_ADDR; + + if (!(msg->flags & I2C_M_RD)) { + len += msg->len; + } else { + /* set maximum received packet size (before rx int!) */ + i2c_w32(msg->len, mrps_ctrl); + } + i2c_w32(len, tps_ctrl); + enable_burst_irq(priv); +} + +static int falcon_i2c_hw_init(struct i2c_adapter *adap) +{ + struct falcon_i2c *priv = i2c_get_adapdata(adap); + + /* disable bus */ + i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); + +#ifndef DEBUG + /* set normal operation clock divider */ + i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); +#else + /* for debugging a higher divider value! */ + i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); +#endif + + /* set frequency */ + if (priv->mode == FALCON_I2C_MODE_100) { + dev_dbg(priv->dev, "set standard mode (100 kHz)\n"); + i2c_w32(0, fdiv_high_cfg); + i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) | + (499 << I2C_FDIV_CFG_DEC_OFFSET), + fdiv_cfg); + } else if (priv->mode == FALCON_I2C_MODE_400) { + dev_dbg(priv->dev, "set fast mode (400 kHz)\n"); + i2c_w32(0, fdiv_high_cfg); + i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) | + (124 << I2C_FDIV_CFG_DEC_OFFSET), + fdiv_cfg); + } else if (priv->mode == FALCON_I2C_MODE_3400) { + dev_dbg(priv->dev, "set high mode (3.4 MHz)\n"); + i2c_w32(0, fdiv_cfg); + /* TODO recalculate value for 100MHz input */ + i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) | + (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET), + fdiv_high_cfg); + } else { + dev_warn(priv->dev, "unknown mode\n"); + return -ENODEV; + } + + /* configure fifo */ + i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ + I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ + I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ + I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ + I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ + I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ + fifo_cfg); + + /* configure address */ + i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data + in the fifo */ + I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ + I2C_ADDR_CFG_MnS_EN | /* we are master device */ + 0, /* our slave address (not used!) */ + addr_cfg); + + /* enable bus */ + i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); + + return 0; +} + +static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv) +{ + int timeout = FALCON_I2C_BUSY_TIMEOUT; + + while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) + != I2C_BUS_STAT_BS_FREE) { + if (timeout <= 0) { + dev_warn(priv->dev, "timeout waiting for bus ready\n"); + return -ETIMEDOUT; + } + timeout--; + mdelay(1); + } + + return 0; +} + +static void falcon_i2c_tx(struct falcon_i2c *priv, int last) +{ + if (priv->msg_buf_len && priv->msg_buf) { + i2c_w32(*priv->msg_buf, txd); + + if (--priv->msg_buf_len) + priv->msg_buf++; + else + priv->msg_buf = NULL; + } else + last = 1; + + if (last) + disable_burst_irq(priv); +} + +static void falcon_i2c_rx(struct falcon_i2c *priv, int last) +{ + u32 fifo_stat, timeout; + if (priv->msg_buf_len && priv->msg_buf) { + timeout = 5000000; + do { + fifo_stat = i2c_r32(ffs_stat); + } while (!fifo_stat && --timeout); + if (!timeout) { + last = 1; + PRINTK("\nrx timeout\n"); + goto err; + } + while (fifo_stat) { + *priv->msg_buf = i2c_r32(rxd); + if (--priv->msg_buf_len) + priv->msg_buf++; + else { + priv->msg_buf = NULL; + last = 1; + break; + } + #if 0 + fifo_stat = i2c_r32(ffs_stat); + #else + /* do not read more than burst size, otherwise no "last + burst" is generated and the transaction is blocked! */ + fifo_stat = 0; + #endif + } + } else { + last = 1; + } +err: + if (last) { + disable_burst_irq(priv); + + if (priv->status == STATUS_READ_END) { + /* do the STATUS_STOP and complete() here, as sometimes + the tx_end is already seen before this is finished */ + priv->status = STATUS_STOP; + complete(&priv->cmd_complete); + } else { + i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); + priv->status = STATUS_READ_END; + } + } +} + +static void falcon_i2c_xfer_init(struct falcon_i2c *priv) +{ + /* enable interrupts */ + i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc); + + /* trigger transfer of first msg */ + set_tx_len(priv); +} + +static void dump_msgs(struct i2c_msg msgs[], int num, int rx) +{ +#if defined(DEBUG) + int i, j; + pr_info("Messages %d %s\n", num, rx ? "out" : "in"); + for (i = 0; i < num; i++) { + pr_info("%2d %cX Msg(%d) addr=0x%X: ", i, + (msgs[i].flags & I2C_M_RD) ? ('R') : ('T'), + msgs[i].len, msgs[i].addr); + if (!(msgs[i].flags & I2C_M_RD) || rx) { + for (j = 0; j < msgs[i].len; j++) + printk("%02X ", msgs[i].buf[j]); + } + printk("\n"); + } +#endif +} + +static void falcon_i2c_release_bus(struct falcon_i2c *priv) +{ + if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) + i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); +} + +static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], + int num) +{ + struct falcon_i2c *priv = i2c_get_adapdata(adap); + int ret; + + dev_dbg(priv->dev, "xfer %u messages\n", num); + dump_msgs(msgs, num, 0); + + mutex_lock(&priv->mutex); + + INIT_COMPLETION(priv->cmd_complete); + priv->current_msg = msgs; + priv->msgs_num = num; + priv->msg_err = 0; + priv->status = STATUS_IDLE; + + /* wait for the bus to become ready */ + ret = falcon_i2c_wait_bus_not_busy(priv); + if (ret) + goto done; + + while (priv->msgs_num) { + /* start the transfers */ + falcon_i2c_xfer_init(priv); + + /* wait for transfers to complete */ + ret = wait_for_completion_interruptible_timeout( + &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT); + if (ret == 0) { + dev_err(priv->dev, "controller timed out\n"); + falcon_i2c_hw_init(adap); + ret = -ETIMEDOUT; + goto done; + } else if (ret < 0) + goto done; + + if (priv->msg_err) { + if (priv->msg_err & FALCON_I2C_NACK) + ret = -ENXIO; + else + ret = -EREMOTEIO; + goto done; + } + if (--priv->msgs_num) + priv->current_msg++; + } + /* no error? */ + ret = num; + +done: + falcon_i2c_release_bus(priv); + + mutex_unlock(&priv->mutex); + + if (ret >= 0) + dump_msgs(msgs, num, 1); + + PRINTK("XFER ret %d\n", ret); + return ret; +} + +static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id) +{ + struct falcon_i2c *priv = dev_id; + struct i2c_msg *msg = priv->current_msg; + int last = (irq == priv->irq_lb); + + if (last) + PRINTK("LB "); + else + PRINTK("B "); + + if (msg->flags & I2C_M_RD) { + switch (priv->status) { + case STATUS_ADDR: + PRINTK("X"); + prepare_msg_send_addr(priv); + disable_burst_irq(priv); + break; + case STATUS_READ: + case STATUS_READ_END: + PRINTK("R"); + falcon_i2c_rx(priv, last); + break; + default: + disable_burst_irq(priv); + PRINTK("Status R %d\n", priv->status); + break; + } + } else { + switch (priv->status) { + case STATUS_ADDR: + PRINTK("x"); + prepare_msg_send_addr(priv); + break; + case STATUS_WRITE: + PRINTK("w"); + falcon_i2c_tx(priv, last); + break; + default: + disable_burst_irq(priv); + PRINTK("Status W %d\n", priv->status); + break; + } + } + + i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); + return IRQ_HANDLED; +} + +static void falcon_i2c_isr_prot(struct falcon_i2c *priv) +{ + u32 i_pro = i2c_r32(p_irqss); + + PRINTK("i2c-p"); + + /* not acknowledge */ + if (i_pro & I2C_P_IRQSS_NACK) { + priv->msg_err |= FALCON_I2C_NACK; + PRINTK(" nack"); + } + + /* arbitration lost */ + if (i_pro & I2C_P_IRQSS_AL) { + priv->msg_err |= FALCON_I2C_ARB_LOST; + PRINTK(" arb-lost"); + } + /* tx -> rx switch */ + if (i_pro & I2C_P_IRQSS_RX) + PRINTK(" rx"); + + /* tx end */ + if (i_pro & I2C_P_IRQSS_TX_END) + PRINTK(" txend"); + PRINTK("\n"); + + if (!priv->msg_err) { + /* tx -> rx switch */ + if (i_pro & I2C_P_IRQSS_RX) { + priv->status = STATUS_READ; + enable_burst_irq(priv); + } + if (i_pro & I2C_P_IRQSS_TX_END) { + if (priv->status == STATUS_READ) + priv->status = STATUS_READ_END; + else { + disable_burst_irq(priv); + priv->status = STATUS_STOP; + } + } + } + + i2c_w32(i_pro, p_irqsc); +} + +static irqreturn_t falcon_i2c_isr(int irq, void *dev_id) +{ + u32 i_raw, i_err = 0; + struct falcon_i2c *priv = dev_id; + + i_raw = i2c_r32(mis); + PRINTK("i_raw 0x%08X\n", i_raw); + + /* error interrupt */ + if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { + i_err = i2c_r32(err_irqss); + PRINTK("i_err 0x%08X bus_stat 0x%04X\n", + i_err, i2c_r32(bus_stat)); + + /* tx fifo overflow (8) */ + if (i_err & I2C_ERR_IRQSS_TXF_OFL) + priv->msg_err |= FALCON_I2C_TX_OFL; + + /* tx fifo underflow (4) */ + if (i_err & I2C_ERR_IRQSS_TXF_UFL) + priv->msg_err |= FALCON_I2C_TX_UFL; + + /* rx fifo overflow (2) */ + if (i_err & I2C_ERR_IRQSS_RXF_OFL) + priv->msg_err |= FALCON_I2C_RX_OFL; + + /* rx fifo underflow (1) */ + if (i_err & I2C_ERR_IRQSS_RXF_UFL) + priv->msg_err |= FALCON_I2C_RX_UFL; + + i2c_w32(i_err, err_irqsc); + } + + /* protocol interrupt */ + if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) + falcon_i2c_isr_prot(priv); + + if ((priv->msg_err) || (priv->status == STATUS_STOP)) + complete(&priv->cmd_complete); + + return IRQ_HANDLED; +} + +static u32 falcon_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | + I2C_FUNC_10BIT_ADDR | + I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm falcon_i2c_algorithm = { + .master_xfer = falcon_i2c_xfer, + .functionality = falcon_i2c_functionality, +}; + +static int __devinit falcon_i2c_probe(struct platform_device *pdev) +{ + int ret = 0; + struct falcon_i2c *priv; + struct i2c_adapter *adap; + struct resource *mmres, *ioarea, + *irqres_lb, *irqres_b, *irqres_err, *irqres_p; + struct clk *clk; + + dev_dbg(&pdev->dev, "probing\n"); + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "i2c_lb"); + irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b"); + irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "i2c_err"); + irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p"); + + if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) { + dev_err(&pdev->dev, "no resources\n"); + return -ENODEV; + } + + clk = clk_get_fpi(); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get fpi clk\n"); + return -ENOENT; + } + + if (clk_get_rate(clk) != 100000000) { + dev_err(&pdev->dev, "input clock is not 100MHz\n"); + return -ENOENT; + } + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get i2c clk\n"); + return -ENOENT; + } + clk_activate(clk); + /* allocate private data */ + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "can't allocate private data\n"); + return -ENOMEM; + } + + adap = &priv->adap; + i2c_set_adapdata(adap, priv); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); + adap->algo = &falcon_i2c_algorithm; + + priv->mode = FALCON_I2C_MODE_100; + priv->clk = clk; + priv->dev = &pdev->dev; + + init_completion(&priv->cmd_complete); + mutex_init(&priv->mutex); + + if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") || + ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl")) + { + dev_err(&pdev->dev, "I2C gpios not available\n"); + ret = -ENXIO; + goto err_free_priv; + } + + ioarea = request_mem_region(mmres->start, resource_size(mmres), + pdev->name); + + if (ioarea == NULL) { + dev_err(&pdev->dev, "I2C region already claimed\n"); + ret = -ENXIO; + goto err_free_gpio; + } + + /* map memory */ + priv->membase = ioremap_nocache(mmres->start & ~KSEG1, + resource_size(mmres)); + if (priv->membase == NULL) { + ret = -ENOMEM; + goto err_release_region; + } + + priv->irq_lb = irqres_lb->start; + ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED, + irqres_lb->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get last burst IRQ %d\n", + irqres_lb->start); + ret = -ENODEV; + goto err_unmap_mem; + } + + priv->irq_b = irqres_b->start; + ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED, + irqres_b->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get burst IRQ %d\n", + irqres_b->start); + ret = -ENODEV; + goto err_free_lb_irq; + } + + priv->irq_err = irqres_err->start; + ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED, + irqres_err->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get error IRQ %d\n", + irqres_err->start); + ret = -ENODEV; + goto err_free_b_irq; + } + + priv->irq_p = irqres_p->start; + ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED, + irqres_p->name, priv); + if (ret) { + dev_err(&pdev->dev, "can't get protocol IRQ %d\n", + irqres_p->start); + ret = -ENODEV; + goto err_free_err_irq; + } + + dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); + dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start, + irqres_b->start, irqres_err->start, irqres_p->start); + + /* add our adapter to the i2c stack */ + ret = i2c_add_numbered_adapter(adap); + if (ret) { + dev_err(&pdev->dev, "can't register I2C adapter\n"); + goto err_free_p_irq; + } + + platform_set_drvdata(pdev, priv); + i2c_set_adapdata(adap, priv); + + /* print module version information */ + dev_dbg(&pdev->dev, "module id=%u revision=%u\n", + (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, + (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); + + /* initialize HW */ + ret = falcon_i2c_hw_init(adap); + if (ret) { + dev_err(&pdev->dev, "can't configure adapter\n"); + goto err_remove_adapter; + } + + dev_info(&pdev->dev, "version %s\n", DRV_VERSION); + + return 0; + +err_remove_adapter: + i2c_del_adapter(adap); + platform_set_drvdata(pdev, NULL); + +err_free_p_irq: + free_irq(priv->irq_p, priv); + +err_free_err_irq: + free_irq(priv->irq_err, priv); + +err_free_b_irq: + free_irq(priv->irq_b, priv); + +err_free_lb_irq: + free_irq(priv->irq_lb, priv); + +err_unmap_mem: + iounmap(priv->membase); + +err_release_region: + release_mem_region(mmres->start, resource_size(mmres)); + +err_free_gpio: + gpio_free(108); + gpio_free(107); + +err_free_priv: + kfree(priv); + + return ret; +} + +static int __devexit falcon_i2c_remove(struct platform_device *pdev) +{ + struct falcon_i2c *priv = platform_get_drvdata(pdev); + struct resource *mmres; + + /* disable bus */ + i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); + + /* remove driver */ + platform_set_drvdata(pdev, NULL); + i2c_del_adapter(&priv->adap); + + free_irq(priv->irq_lb, priv); + free_irq(priv->irq_b, priv); + free_irq(priv->irq_err, priv); + free_irq(priv->irq_p, priv); + + iounmap(priv->membase); + + gpio_free(108); + gpio_free(107); + + kfree(priv); + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mmres->start, resource_size(mmres)); + + dev_dbg(&pdev->dev, "removed\n"); + + return 0; +} + +static struct platform_driver falcon_i2c_driver = { + .probe = falcon_i2c_probe, + .remove = __devexit_p(falcon_i2c_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init falcon_i2c_init(void) +{ + int ret; + + ret = platform_driver_register(&falcon_i2c_driver); + + if (ret) + pr_debug(DRV_NAME ": can't register platform driver\n"); + + return ret; +} + +static void __exit falcon_i2c_exit(void) +{ + platform_driver_unregister(&falcon_i2c_driver); +} + +module_init(falcon_i2c_init); +module_exit(falcon_i2c_exit); + +MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); diff --git a/target/linux/lantiq/files-3.3/drivers/net/ethernet/lantiq_vrx200.c b/target/linux/lantiq/files-3.3/drivers/net/ethernet/lantiq_vrx200.c new file mode 100644 index 0000000000..d79d3803cc --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/net/ethernet/lantiq_vrx200.c @@ -0,0 +1,1358 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <linux/in.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/phy.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/clk.h> + +#include <asm/checksum.h> + +#include <lantiq_soc.h> +#include <xway_dma.h> +#include <lantiq_platform.h> + +#define LTQ_SWITCH_BASE 0x1E108000 +#define LTQ_SWITCH_CORE_BASE LTQ_SWITCH_BASE +#define LTQ_SWITCH_TOP_PDI_BASE LTQ_SWITCH_CORE_BASE +#define LTQ_SWITCH_BM_PDI_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x40) +#define LTQ_SWITCH_MAC_PDI_0_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x900) +#define LTQ_SWITCH_MAC_PDI_X_BASE(x) (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30) +#define LTQ_SWITCH_TOPLEVEL_BASE (LTQ_SWITCH_BASE + 4 * 0xC40) +#define LTQ_SWITCH_MDIO_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE) +#define LTQ_SWITCH_MII_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36) +#define LTQ_SWITCH_PMAC_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82) + +#define LTQ_ETHSW_MAC_CTRL0_PADEN (1 << 8) +#define LTQ_ETHSW_MAC_CTRL0_FCS (1 << 7) +#define LTQ_ETHSW_MAC_CTRL1_SHORTPRE (1 << 8) +#define LTQ_ETHSW_MAC_CTRL2_MLEN (1 << 3) +#define LTQ_ETHSW_MAC_CTRL2_LCHKL (1 << 2) +#define LTQ_ETHSW_MAC_CTRL2_LCHKS_DIS 0 +#define LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG 1 +#define LTQ_ETHSW_MAC_CTRL2_LCHKS_TAG 2 +#define LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT 9 +#define LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS (1 << 6) +#define LTQ_ETHSW_GLOB_CTRL_SE (1 << 15) +#define LTQ_ETHSW_MDC_CFG1_MCEN (1 << 8) +#define LTQ_ETHSW_PMAC_HD_CTL_FC (1 << 10) +#define LTQ_ETHSW_PMAC_HD_CTL_RC (1 << 4) +#define LTQ_ETHSW_PMAC_HD_CTL_AC (1 << 2) +#define ADVERTIZE_MPD (1 << 10) + +#define MDIO_DEVAD_NONE (-1) + +#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX + +#define LTQ_MDIO_DRV_NAME "ltq-mdio" +#define LTQ_ETH_DRV_NAME "ltq-eth" + +#define LTQ_ETHSW_MAX_GMAC 1 +#define LTQ_ETHSW_PMAC 1 + +#define ltq_setbits(a, set) \ + ltq_w32(ltq_r32(a) | (set), a) + +enum ltq_reset_modules { + LTQ_RESET_CORE, + LTQ_RESET_DMA, + LTQ_RESET_ETH, + LTQ_RESET_PHY, + LTQ_RESET_HARD, + LTQ_RESET_SOFT, +}; + +static inline void +dbg_ltq_writel(void *a, unsigned int b) +{ + ltq_w32(b, a); +} + +int ltq_reset_once(enum ltq_reset_modules module, ulong usec); + +struct ltq_ethsw_mac_pdi_x_regs { + u32 pstat; /* Port status */ + u32 pisr; /* Interrupt status */ + u32 pier; /* Interrupt enable */ + u32 ctrl_0; /* Control 0 */ + u32 ctrl_1; /* Control 1 */ + u32 ctrl_2; /* Control 2 */ + u32 ctrl_3; /* Control 3 */ + u32 ctrl_4; /* Control 4 */ + u32 ctrl_5; /* Control 5 */ + u32 ctrl_6; /* Control 6 */ + u32 bufst; /* TX/RX buffer control */ + u32 testen; /* Test enable */ +}; + +struct ltq_ethsw_mac_pdi_regs { + struct ltq_ethsw_mac_pdi_x_regs mac[12]; +}; + +struct ltq_ethsw_mdio_pdi_regs { + u32 glob_ctrl; /* Global control 0 */ + u32 rsvd0[7]; + u32 mdio_ctrl; /* MDIO control */ + u32 mdio_read; /* MDIO read data */ + u32 mdio_write; /* MDIO write data */ + u32 mdc_cfg_0; /* MDC clock configuration 0 */ + u32 mdc_cfg_1; /* MDC clock configuration 1 */ + u32 rsvd[3]; + u32 phy_addr_5; /* PHY address port 5 */ + u32 phy_addr_4; /* PHY address port 4 */ + u32 phy_addr_3; /* PHY address port 3 */ + u32 phy_addr_2; /* PHY address port 2 */ + u32 phy_addr_1; /* PHY address port 1 */ + u32 phy_addr_0; /* PHY address port 0 */ + u32 mdio_stat_0; /* MDIO PHY polling status port 0 */ + u32 mdio_stat_1; /* MDIO PHY polling status port 1 */ + u32 mdio_stat_2; /* MDIO PHY polling status port 2 */ + u32 mdio_stat_3; /* MDIO PHY polling status port 3 */ + u32 mdio_stat_4; /* MDIO PHY polling status port 4 */ + u32 mdio_stat_5; /* MDIO PHY polling status port 5 */ +}; + +struct ltq_ethsw_mii_pdi_regs { + u32 mii_cfg0; /* xMII port 0 configuration */ + u32 pcdu0; /* Port 0 clock delay configuration */ + u32 mii_cfg1; /* xMII port 1 configuration */ + u32 pcdu1; /* Port 1 clock delay configuration */ + u32 mii_cfg2; /* xMII port 2 configuration */ + u32 rsvd0; + u32 mii_cfg3; /* xMII port 3 configuration */ + u32 rsvd1; + u32 mii_cfg4; /* xMII port 4 configuration */ + u32 rsvd2; + u32 mii_cfg5; /* xMII port 5 configuration */ + u32 pcdu5; /* Port 5 clock delay configuration */ +}; + +struct ltq_ethsw_pmac_pdi_regs { + u32 hd_ctl; /* PMAC header control */ + u32 tl; /* PMAC type/length */ + u32 sa1; /* PMAC source address 1 */ + u32 sa2; /* PMAC source address 2 */ + u32 sa3; /* PMAC source address 3 */ + u32 da1; /* PMAC destination address 1 */ + u32 da2; /* PMAC destination address 2 */ + u32 da3; /* PMAC destination address 3 */ + u32 vlan; /* PMAC VLAN */ + u32 rx_ipg; /* PMAC interpacket gap in RX direction */ + u32 st_etype; /* PMAC special tag ethertype */ + u32 ewan; /* PMAC ethernet WAN group */ +}; + +struct ltq_mdio_phy_addr_reg { + union { + struct { + unsigned rsvd:1; + unsigned lnkst:2; /* Link status control */ + unsigned speed:2; /* Speed control */ + unsigned fdup:2; /* Full duplex control */ + unsigned fcontx:2; /* Flow control mode TX */ + unsigned fconrx:2; /* Flow control mode RX */ + unsigned addr:5; /* PHY address */ + } bits; + u16 val; + }; +}; + +enum ltq_mdio_phy_addr_lnkst { + LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0, + LTQ_MDIO_PHY_ADDR_LNKST_UP = 1, + LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2, +}; + +enum ltq_mdio_phy_addr_speed { + LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0, + LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1, + LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2, + LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3, +}; + +enum ltq_mdio_phy_addr_fdup { + LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0, + LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1, + LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3, +}; + +enum ltq_mdio_phy_addr_fcon { + LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0, + LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1, + LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3, +}; + +struct ltq_mii_mii_cfg_reg { + union { + struct { + unsigned res:1; /* Hardware reset */ + unsigned en:1; /* xMII interface enable */ + unsigned isol:1; /* xMII interface isolate */ + unsigned ldclkdis:1; /* Link down clock disable */ + unsigned rsvd:1; + unsigned crs:2; /* CRS sensitivity config */ + unsigned rgmii_ibs:1; /* RGMII In Band status */ + unsigned rmii:1; /* RMII ref clock direction */ + unsigned miirate:3; /* xMII interface clock rate */ + unsigned miimode:4; /* xMII interface mode */ + } bits; + u16 val; + }; +}; + +enum ltq_mii_mii_cfg_miirate { + LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0, + LTQ_MII_MII_CFG_MIIRATE_M25 = 1, + LTQ_MII_MII_CFG_MIIRATE_M125 = 2, + LTQ_MII_MII_CFG_MIIRATE_M50 = 3, + LTQ_MII_MII_CFG_MIIRATE_AUTO = 4, +}; + +enum ltq_mii_mii_cfg_miimode { + LTQ_MII_MII_CFG_MIIMODE_MIIP = 0, + LTQ_MII_MII_CFG_MIIMODE_MIIM = 1, + LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2, + LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3, + LTQ_MII_MII_CFG_MIIMODE_RGMII = 4, +}; + +struct ltq_eth_priv { + struct ltq_dma_device *dma_dev; + struct mii_dev *bus; + struct eth_device *dev; + struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC]; + int rx_num; +}; + +enum ltq_mdio_mbusy { + LTQ_MDIO_MBUSY_IDLE = 0, + LTQ_MDIO_MBUSY_BUSY = 1, +}; + +enum ltq_mdio_op { + LTQ_MDIO_OP_WRITE = 1, + LTQ_MDIO_OP_READ = 2, +}; + +struct ltq_mdio_access { + union { + struct { + unsigned rsvd:3; + unsigned mbusy:1; + unsigned op:2; + unsigned phyad:5; + unsigned regad:5; + } bits; + u16 val; + }; +}; + +enum LTQ_ETH_PORT_FLAGS { + LTQ_ETH_PORT_NONE = 0, + LTQ_ETH_PORT_PHY = 1, + LTQ_ETH_PORT_SWITCH = (1 << 1), + LTQ_ETH_PORT_MAC = (1 << 2), +}; + +struct ltq_eth_port_config { + u8 num; + u8 phy_addr; + u16 flags; + phy_interface_t phy_if; +}; + +struct ltq_eth_board_config { + const struct ltq_eth_port_config *ports; + int num_ports; +}; + +static const struct ltq_eth_port_config eth_port_config[] = { + /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */ + { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII }, + /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */ + { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII }, +}; + +static const struct ltq_eth_board_config board_config = { + .ports = eth_port_config, + .num_ports = ARRAY_SIZE(eth_port_config), +}; + +static struct ltq_ethsw_mac_pdi_regs *ltq_ethsw_mac_pdi_regs = + (struct ltq_ethsw_mac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MAC_PDI_0_BASE); + +static struct ltq_ethsw_mdio_pdi_regs *ltq_ethsw_mdio_pdi_regs = + (struct ltq_ethsw_mdio_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MDIO_PDI_BASE); + +static struct ltq_ethsw_mii_pdi_regs *ltq_ethsw_mii_pdi_regs = + (struct ltq_ethsw_mii_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MII_PDI_BASE); + +static struct ltq_ethsw_pmac_pdi_regs *ltq_ethsw_pmac_pdi_regs = + (struct ltq_ethsw_pmac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_PMAC_PDI_BASE); + + +#define MAX_DMA_CHAN 0x8 +#define MAX_DMA_CRC_LEN 0x4 +#define MAX_DMA_DATA_LEN 0x600 + +/* use 2 static channels for TX/RX + depending on the SoC we need to use different DMA channels for ethernet */ +#define LTQ_ETOP_TX_CHANNEL 1 +#define LTQ_ETOP_RX_CHANNEL 0 + +#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL) +#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL) + +#define DRV_VERSION "1.0" + +static void __iomem *ltq_vrx200_membase; + +struct ltq_vrx200_chan { + int idx; + int tx_free; + struct net_device *netdev; + struct napi_struct napi; + struct ltq_dma_channel dma; + struct sk_buff *skb[LTQ_DESC_NUM]; +}; + +struct ltq_vrx200_priv { + struct net_device *netdev; + struct ltq_eth_data *pldata; + struct resource *res; + + struct mii_bus *mii_bus; + struct phy_device *phydev; + + struct ltq_vrx200_chan ch[MAX_DMA_CHAN]; + int tx_free[MAX_DMA_CHAN >> 1]; + + spinlock_t lock; + + struct clk *clk_ppe; +}; + +static int ltq_vrx200_mdio_wr(struct mii_bus *bus, int phy_addr, + int phy_reg, u16 phy_data); + +static int +ltq_vrx200_alloc_skb(struct ltq_vrx200_chan *ch) +{ + ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN); + if (!ch->skb[ch->dma.desc]) + return -ENOMEM; + ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, + ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN, + DMA_FROM_DEVICE); + ch->dma.desc_base[ch->dma.desc].addr = + CPHYSADDR(ch->skb[ch->dma.desc]->data); + ch->dma.desc_base[ch->dma.desc].ctl = + LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | + MAX_DMA_DATA_LEN; + skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); + return 0; +} + +static void +ltq_vrx200_hw_receive(struct ltq_vrx200_chan *ch) +{ + struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev); + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; + struct sk_buff *skb = ch->skb[ch->dma.desc]; + int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (ltq_vrx200_alloc_skb(ch)) { + netdev_err(ch->netdev, + "failed to allocate new rx buffer, stopping DMA\n"); + ltq_dma_close(&ch->dma); + } + ch->dma.desc++; + ch->dma.desc %= LTQ_DESC_NUM; + spin_unlock_irqrestore(&priv->lock, flags); + + skb_put(skb, len); + skb->dev = ch->netdev; + skb->protocol = eth_type_trans(skb, ch->netdev); + netif_receive_skb(skb); +} + +static int +ltq_vrx200_poll_rx(struct napi_struct *napi, int budget) +{ + struct ltq_vrx200_chan *ch = container_of(napi, + struct ltq_vrx200_chan, napi); + struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev); + int rx = 0; + int complete = 0; + unsigned long flags; + + while ((rx < budget) && !complete) { + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; + + if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { + ltq_vrx200_hw_receive(ch); + rx++; + } else { + complete = 1; + } + } + if (complete || !rx) { + napi_complete(&ch->napi); + spin_lock_irqsave(&priv->lock, flags); + ltq_dma_ack_irq(&ch->dma); + spin_unlock_irqrestore(&priv->lock, flags); + } + return rx; +} + +static int +ltq_vrx200_poll_tx(struct napi_struct *napi, int budget) +{ + struct ltq_vrx200_chan *ch = + container_of(napi, struct ltq_vrx200_chan, napi); + struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev); + struct netdev_queue *txq = + netdev_get_tx_queue(ch->netdev, ch->idx >> 1); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + while ((ch->dma.desc_base[ch->tx_free].ctl & + (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { + dev_kfree_skb_any(ch->skb[ch->tx_free]); + ch->skb[ch->tx_free] = NULL; + memset(&ch->dma.desc_base[ch->tx_free], 0, + sizeof(struct ltq_dma_desc)); + ch->tx_free++; + ch->tx_free %= LTQ_DESC_NUM; + } + spin_unlock_irqrestore(&priv->lock, flags); + + if (netif_tx_queue_stopped(txq)) + netif_tx_start_queue(txq); + napi_complete(&ch->napi); + spin_lock_irqsave(&priv->lock, flags); + ltq_dma_ack_irq(&ch->dma); + spin_unlock_irqrestore(&priv->lock, flags); + return 1; +} + +static irqreturn_t +ltq_vrx200_dma_irq(int irq, void *_priv) +{ + struct ltq_vrx200_priv *priv = _priv; + int ch = irq - LTQ_DMA_ETOP; + + napi_schedule(&priv->ch[ch].napi); + return IRQ_HANDLED; +} + +static void +ltq_vrx200_free_channel(struct net_device *dev, struct ltq_vrx200_chan *ch) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + + ltq_dma_free(&ch->dma); + if (ch->dma.irq) + free_irq(ch->dma.irq, priv); + if (IS_RX(ch->idx)) { + int desc; + for (desc = 0; desc < LTQ_DESC_NUM; desc++) + dev_kfree_skb_any(ch->skb[ch->dma.desc]); + } +} + +static void +ltq_vrx200_hw_exit(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + int i; + + clk_disable(priv->clk_ppe); + + for (i = 0; i < MAX_DMA_CHAN; i++) + if (IS_TX(i) || IS_RX(i)) + ltq_vrx200_free_channel(dev, &priv->ch[i]); +} + +static void *ltq_eth_phy_addr_reg(int num) +{ + switch (num) { + case 0: + return <q_ethsw_mdio_pdi_regs->phy_addr_0; + case 1: + return <q_ethsw_mdio_pdi_regs->phy_addr_1; + case 2: + return <q_ethsw_mdio_pdi_regs->phy_addr_2; + case 3: + return <q_ethsw_mdio_pdi_regs->phy_addr_3; + case 4: + return <q_ethsw_mdio_pdi_regs->phy_addr_4; + case 5: + return <q_ethsw_mdio_pdi_regs->phy_addr_5; + } + + return NULL; +} + +static void *ltq_eth_mii_cfg_reg(int num) +{ + switch (num) { + case 0: + return <q_ethsw_mii_pdi_regs->mii_cfg0; + case 1: + return <q_ethsw_mii_pdi_regs->mii_cfg1; + case 2: + return <q_ethsw_mii_pdi_regs->mii_cfg2; + case 3: + return <q_ethsw_mii_pdi_regs->mii_cfg3; + case 4: + return <q_ethsw_mii_pdi_regs->mii_cfg4; + case 5: + return <q_ethsw_mii_pdi_regs->mii_cfg5; + } + + return NULL; +} + +static void ltq_eth_gmac_update(struct phy_device *phydev, int num) +{ + struct ltq_mdio_phy_addr_reg phy_addr_reg; + struct ltq_mii_mii_cfg_reg mii_cfg_reg; + void *phy_addr = ltq_eth_phy_addr_reg(num); + void *mii_cfg = ltq_eth_mii_cfg_reg(num); + + phy_addr_reg.val = ltq_r32(phy_addr); + mii_cfg_reg.val = ltq_r32(mii_cfg); + + phy_addr_reg.bits.addr = phydev->addr; + + if (phydev->link) + phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP; + else + phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN; + + switch (phydev->speed) { + case SPEED_1000: + phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1; + mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125; + break; + case SPEED_100: + phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100; + switch (mii_cfg_reg.bits.miimode) { + case LTQ_MII_MII_CFG_MIIMODE_RMIIM: + case LTQ_MII_MII_CFG_MIIMODE_RMIIP: + mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50; + break; + default: + mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25; + break; + } + break; + default: + phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10; + mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5; + break; + } + + if (phydev->duplex == DUPLEX_FULL) + phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE; + else + phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE; + + dbg_ltq_writel(phy_addr, phy_addr_reg.val); + dbg_ltq_writel(mii_cfg, mii_cfg_reg.val); + udelay(1); +} + + +static void ltq_eth_port_config(struct ltq_vrx200_priv *priv, + const struct ltq_eth_port_config *port) +{ + struct ltq_mii_mii_cfg_reg mii_cfg_reg; + void *mii_cfg = ltq_eth_mii_cfg_reg(port->num); + int setup_gpio = 0; + + mii_cfg_reg.val = ltq_r32(mii_cfg); + + + switch (port->num) { + case 0: /* xMII0 */ + case 1: /* xMII1 */ + switch (port->phy_if) { + case PHY_INTERFACE_MODE_MII: + if (port->flags & LTQ_ETH_PORT_PHY) + /* MII MAC mode, connected to external PHY */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_MIIM; + else + /* MII PHY mode, connected to external MAC */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_MIIP; + setup_gpio = 1; + break; + case PHY_INTERFACE_MODE_RMII: + if (port->flags & LTQ_ETH_PORT_PHY) + /* RMII MAC mode, connected to external PHY */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_RMIIM; + else + /* RMII PHY mode, connected to external MAC */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_RMIIP; + setup_gpio = 1; + break; + case PHY_INTERFACE_MODE_RGMII: + /* RGMII MAC mode, connected to external PHY */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_RGMII; + setup_gpio = 1; + break; + default: + break; + } + break; + case 2: /* internal GPHY0 */ + case 3: /* internal GPHY0 */ + case 4: /* internal GPHY1 */ + switch (port->phy_if) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: + /* MII MAC mode, connected to internal GPHY */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_MIIM; + setup_gpio = 1; + break; + default: + break; + } + break; + case 5: /* internal GPHY1 or xMII2 */ + switch (port->phy_if) { + case PHY_INTERFACE_MODE_MII: + /* MII MAC mode, connected to internal GPHY */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_MIIM; + setup_gpio = 1; + break; + case PHY_INTERFACE_MODE_RGMII: + /* RGMII MAC mode, connected to external PHY */ + mii_cfg_reg.bits.miimode = + LTQ_MII_MII_CFG_MIIMODE_RGMII; + setup_gpio = 1; + break; + default: + break; + } + break; + default: + break; + } + + /* Enable MII interface */ + mii_cfg_reg.bits.en = port->flags ? 1 : 0; + dbg_ltq_writel(mii_cfg, mii_cfg_reg.val); + +} + +static void ltq_eth_gmac_init(int num) +{ + struct ltq_mdio_phy_addr_reg phy_addr_reg; + struct ltq_mii_mii_cfg_reg mii_cfg_reg; + void *phy_addr = ltq_eth_phy_addr_reg(num); + void *mii_cfg = ltq_eth_mii_cfg_reg(num); + struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs; + + mac_pdi_regs = <q_ethsw_mac_pdi_regs->mac[num]; + + /* Reset PHY status to link down */ + phy_addr_reg.val = ltq_r32(phy_addr); + phy_addr_reg.bits.addr = num; + phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN; + phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10; + phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE; + dbg_ltq_writel(phy_addr, phy_addr_reg.val); + + /* Reset and disable MII interface */ + mii_cfg_reg.val = ltq_r32(mii_cfg); + mii_cfg_reg.bits.en = 0; + mii_cfg_reg.bits.res = 1; + mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5; + dbg_ltq_writel(mii_cfg, mii_cfg_reg.val); + + /* + * Enable padding of short frames, enable frame checksum generation + * in transmit direction + */ + dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN | + LTQ_ETHSW_MAC_CTRL0_FCS); + + /* Set inter packet gap size to 12 bytes */ + dbg_ltq_writel(&mac_pdi_regs->ctrl_1, 12); + + /* + * Configure frame length checks: + * - allow jumbo frames + * - enable long length check + * - enable short length without VLAN tags + */ + dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN | + LTQ_ETHSW_MAC_CTRL2_LCHKL | + LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG); +} + + +static void ltq_eth_pmac_init(void) +{ + struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs; + + mac_pdi_regs = <q_ethsw_mac_pdi_regs->mac[LTQ_ETHSW_PMAC]; + + /* + * Enable padding of short frames, enable frame checksum generation + * in transmit direction + */ + dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN | + LTQ_ETHSW_MAC_CTRL0_FCS); + + /* + * Configure frame length checks: + * - allow jumbo frames + * - enable long length check + * - enable short length without VLAN tags + */ + dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN | + LTQ_ETHSW_MAC_CTRL2_LCHKL | + LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG); + + /* + * Apply workaround for buffer congestion: + * - shorten preambel to 1 byte + * - set minimum inter packet gap size to 7 bytes + * - enable receive buffer bypass mode + */ + dbg_ltq_writel(&mac_pdi_regs->ctrl_1, LTQ_ETHSW_MAC_CTRL1_SHORTPRE | 7); + dbg_ltq_writel(&mac_pdi_regs->ctrl_6, + (6 << LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT) | + LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS); + + /* Set request assertion threshold to 8, IPG counter to 11 */ + dbg_ltq_writel(<q_ethsw_pmac_pdi_regs->rx_ipg, 0x8B); + + /* + * Configure frame header control: + * - enable reaction on pause frames (flow control) + * - remove CRC for packets from PMAC to DMA + * - add CRC for packets from DMA to PMAC + */ + dbg_ltq_writel(<q_ethsw_pmac_pdi_regs->hd_ctl, LTQ_ETHSW_PMAC_HD_CTL_FC | + /*LTQ_ETHSW_PMAC_HD_CTL_RC | */LTQ_ETHSW_PMAC_HD_CTL_AC); +} + +static int +ltq_vrx200_hw_init(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + int err = 0; + int i; + + netdev_info(dev, "setting up dma\n"); + ltq_dma_init_port(DMA_PORT_ETOP); + + netdev_info(dev, "setting up pmu\n"); + clk_enable(priv->clk_ppe); + + /* Reset ethernet and switch subsystems */ + netdev_info(dev, "reset core\n"); + ltq_reset_once(BIT(8), 10); + + /* Enable switch macro */ + ltq_setbits(<q_ethsw_mdio_pdi_regs->glob_ctrl, + LTQ_ETHSW_GLOB_CTRL_SE); + + /* Disable MDIO auto-polling for all ports */ + dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdc_cfg_0, 0); + + /* + * Enable and set MDIO management clock to 2.5 MHz. This is the + * maximum clock for FE PHYs. + * Formula for clock is: + * + * 50 MHz + * x = ----------- - 1 + * 2 * f_MDC + */ + dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdc_cfg_1, + LTQ_ETHSW_MDC_CFG1_MCEN | 9); + + /* Init MAC connected to CPU */ + ltq_eth_pmac_init(); + + /* Init MACs connected to external MII interfaces */ + for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++) + ltq_eth_gmac_init(i); + + for (i = 0; i < MAX_DMA_CHAN && !err; i++) { + int irq = LTQ_DMA_ETOP + i; + struct ltq_vrx200_chan *ch = &priv->ch[i]; + + ch->idx = ch->dma.nr = i; + + if (IS_TX(i)) { + ltq_dma_alloc_tx(&ch->dma); + err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED, + "vrx200_tx", priv); + } else if (IS_RX(i)) { + ltq_dma_alloc_rx(&ch->dma); + for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; + ch->dma.desc++) + if (ltq_vrx200_alloc_skb(ch)) + err = -ENOMEM; + ch->dma.desc = 0; + err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED, + "vrx200_rx", priv); + } + if (!err) + ch->dma.irq = irq; + } + for (i = 0; i < board_config.num_ports; i++) + ltq_eth_port_config(priv, &board_config.ports[i]); + return err; +} + +static void +ltq_vrx200_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strcpy(info->driver, "Lantiq ETOP"); + strcpy(info->bus_info, "internal"); + strcpy(info->version, DRV_VERSION); +} + +static int +ltq_vrx200_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + + return phy_ethtool_gset(priv->phydev, cmd); +} + +static int +ltq_vrx200_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + + return phy_ethtool_sset(priv->phydev, cmd); +} + +static int +ltq_vrx200_nway_reset(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + + return phy_start_aneg(priv->phydev); +} + +static const struct ethtool_ops ltq_vrx200_ethtool_ops = { + .get_drvinfo = ltq_vrx200_get_drvinfo, + .get_settings = ltq_vrx200_get_settings, + .set_settings = ltq_vrx200_set_settings, + .nway_reset = ltq_vrx200_nway_reset, +}; + +static inline int ltq_mdio_poll(struct mii_bus *bus) +{ + struct ltq_mdio_access acc; + unsigned cnt = 10000; + + while (likely(cnt--)) { + acc.val = ltq_r32(<q_ethsw_mdio_pdi_regs->mdio_ctrl); + if (!acc.bits.mbusy) + return 0; + } + + return 1; +} + +static int +ltq_vrx200_mdio_wr(struct mii_bus *bus, int addr, int regnum, u16 val) +{ + struct ltq_mdio_access acc; + int ret; + + acc.val = 0; + acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY; + acc.bits.op = LTQ_MDIO_OP_WRITE; + acc.bits.phyad = addr; + acc.bits.regad = regnum; + + ret = ltq_mdio_poll(bus); + if (ret) + return ret; + + dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_write, val); + dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val); + + return 0; +} + +static int +ltq_vrx200_mdio_rd(struct mii_bus *bus, int addr, int regnum) +{ + struct ltq_mdio_access acc; + int ret; + + acc.val = 0; + acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY; + acc.bits.op = LTQ_MDIO_OP_READ; + acc.bits.phyad = addr; + acc.bits.regad = regnum; + + ret = ltq_mdio_poll(bus); + if (ret) + goto timeout; + + dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val); + + ret = ltq_mdio_poll(bus); + if (ret) + goto timeout; + + ret = ltq_r32(<q_ethsw_mdio_pdi_regs->mdio_read); + + return ret; +timeout: + return -1; +} + +static void +ltq_vrx200_mdio_link(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + ltq_eth_gmac_update(priv->phydev, 0); +} + +static int +ltq_vrx200_mdio_probe(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + struct phy_device *phydev = NULL; + int val; + + phydev = priv->mii_bus->phy_map[0]; + + if (!phydev) { + netdev_err(dev, "no PHY found\n"); + return -ENODEV; + } + + phydev = phy_connect(dev, dev_name(&phydev->dev), <q_vrx200_mdio_link, + 0, 0); + + if (IS_ERR(phydev)) { + netdev_err(dev, "Could not attach to PHY\n"); + return PTR_ERR(phydev); + } + + phydev->supported &= (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg + | SUPPORTED_MII + | SUPPORTED_TP); + phydev->advertising = phydev->supported; + priv->phydev = phydev; + + pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", + dev->name, phydev->drv->name, + dev_name(&phydev->dev), phydev->irq); + + val = ltq_vrx200_mdio_rd(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); + val |= ADVERTIZE_MPD; + ltq_vrx200_mdio_wr(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); + ltq_vrx200_mdio_wr(priv->mii_bus, 0, 0, 0x1040); + + phy_start_aneg(phydev); + + return 0; +} + +static int +ltq_vrx200_mdio_init(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + int i; + int err; + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) { + netdev_err(dev, "failed to allocate mii bus\n"); + err = -ENOMEM; + goto err_out; + } + + priv->mii_bus->priv = dev; + priv->mii_bus->read = ltq_vrx200_mdio_rd; + priv->mii_bus->write = ltq_vrx200_mdio_wr; + priv->mii_bus->name = "ltq_mii"; + snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); + priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!priv->mii_bus->irq) { + err = -ENOMEM; + goto err_out_free_mdiobus; + } + + for (i = 0; i < PHY_MAX_ADDR; ++i) + priv->mii_bus->irq[i] = PHY_POLL; + + if (mdiobus_register(priv->mii_bus)) { + err = -ENXIO; + goto err_out_free_mdio_irq; + } + + if (ltq_vrx200_mdio_probe(dev)) { + err = -ENXIO; + goto err_out_unregister_bus; + } + return 0; + +err_out_unregister_bus: + mdiobus_unregister(priv->mii_bus); +err_out_free_mdio_irq: + kfree(priv->mii_bus->irq); +err_out_free_mdiobus: + mdiobus_free(priv->mii_bus); +err_out: + return err; +} + +static void +ltq_vrx200_mdio_cleanup(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + + phy_disconnect(priv->phydev); + mdiobus_unregister(priv->mii_bus); + kfree(priv->mii_bus->irq); + mdiobus_free(priv->mii_bus); +} + +void phy_dump(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + int i; + for (i = 0; i < 0x1F; i++) { + unsigned int val = ltq_vrx200_mdio_rd(priv->mii_bus, 0, i); + printk("%d %4X\n", i, val); + } +} + +static int +ltq_vrx200_open(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + int i; + unsigned long flags; + + for (i = 0; i < MAX_DMA_CHAN; i++) { + struct ltq_vrx200_chan *ch = &priv->ch[i]; + + if (!IS_TX(i) && (!IS_RX(i))) + continue; + napi_enable(&ch->napi); + spin_lock_irqsave(&priv->lock, flags); + ltq_dma_open(&ch->dma); + spin_unlock_irqrestore(&priv->lock, flags); + } + if (priv->phydev) { + phy_start(priv->phydev); + phy_dump(dev); + } + netif_tx_start_all_queues(dev); + return 0; +} + +static int +ltq_vrx200_stop(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + int i; + unsigned long flags; + + netif_tx_stop_all_queues(dev); + if (priv->phydev) + phy_stop(priv->phydev); + for (i = 0; i < MAX_DMA_CHAN; i++) { + struct ltq_vrx200_chan *ch = &priv->ch[i]; + + if (!IS_RX(i) && !IS_TX(i)) + continue; + napi_disable(&ch->napi); + spin_lock_irqsave(&priv->lock, flags); + ltq_dma_close(&ch->dma); + spin_unlock_irqrestore(&priv->lock, flags); + } + return 0; +} + +static int +ltq_vrx200_tx(struct sk_buff *skb, struct net_device *dev) +{ + int queue = skb_get_queue_mapping(skb); + struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); + struct ltq_vrx200_priv *priv = netdev_priv(dev); + struct ltq_vrx200_chan *ch = &priv->ch[(queue << 1) | 1]; + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; + unsigned long flags; + u32 byte_offset; + int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { + netdev_err(dev, "tx ring full\n"); + netif_tx_stop_queue(txq); + return NETDEV_TX_BUSY; + } + + /* dma needs to start on a 16 byte aligned address */ + byte_offset = CPHYSADDR(skb->data) % 16; + ch->skb[ch->dma.desc] = skb; + + dev->trans_start = jiffies; + + spin_lock_irqsave(&priv->lock, flags); + desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len, + DMA_TO_DEVICE)) - byte_offset; + wmb(); + desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | + LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); + ch->dma.desc++; + ch->dma.desc %= LTQ_DESC_NUM; + spin_unlock_irqrestore(&priv->lock, flags); + + if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) + netif_tx_stop_queue(txq); + + return NETDEV_TX_OK; +} + +static int +ltq_vrx200_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + + /* TODO: mii-toll reports "No MII transceiver present!." ?!*/ + return phy_mii_ioctl(priv->phydev, rq, cmd); +} + +static u16 +ltq_vrx200_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + /* we are currently only using the first queue */ + return 0; +} + +static int +ltq_vrx200_init(struct net_device *dev) +{ + struct ltq_vrx200_priv *priv = netdev_priv(dev); + struct sockaddr mac; + int err; + + ether_setup(dev); + dev->watchdog_timeo = 10 * HZ; + + err = ltq_vrx200_hw_init(dev); + if (err) + goto err_hw; + + memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); + if (!is_valid_ether_addr(mac.sa_data)) { + pr_warn("vrx200: invalid MAC, using random\n"); + random_ether_addr(mac.sa_data); + } + eth_mac_addr(dev, &mac); + + if (!ltq_vrx200_mdio_init(dev)) + dev->ethtool_ops = <q_vrx200_ethtool_ops; + else + pr_warn("vrx200: mdio probe failed\n");; + return 0; + +err_hw: + ltq_vrx200_hw_exit(dev); + return err; +} + +static void +ltq_vrx200_tx_timeout(struct net_device *dev) +{ + int err; + + ltq_vrx200_hw_exit(dev); + err = ltq_vrx200_hw_init(dev); + if (err) + goto err_hw; + dev->trans_start = jiffies; + netif_wake_queue(dev); + return; + +err_hw: + ltq_vrx200_hw_exit(dev); + netdev_err(dev, "failed to restart vrx200 after TX timeout\n"); +} + +static const struct net_device_ops ltq_eth_netdev_ops = { + .ndo_open = ltq_vrx200_open, + .ndo_stop = ltq_vrx200_stop, + .ndo_start_xmit = ltq_vrx200_tx, + .ndo_change_mtu = eth_change_mtu, + .ndo_do_ioctl = ltq_vrx200_ioctl, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_select_queue = ltq_vrx200_select_queue, + .ndo_init = ltq_vrx200_init, + .ndo_tx_timeout = ltq_vrx200_tx_timeout, +}; + +static int __devinit +ltq_vrx200_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct ltq_vrx200_priv *priv; + struct resource *res; + int err; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get vrx200 resource\n"); + err = -ENOENT; + goto err_out; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request vrx200 resource\n"); + err = -EBUSY; + goto err_out; + } + + ltq_vrx200_membase = devm_ioremap_nocache(&pdev->dev, + res->start, resource_size(res)); + if (!ltq_vrx200_membase) { + dev_err(&pdev->dev, "failed to remap vrx200 engine %d\n", + pdev->id); + err = -ENOMEM; + goto err_out; + } + + if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") || + ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) { + dev_err(&pdev->dev, "failed to request MDIO gpios\n"); + err = -EBUSY; + goto err_out; + } + + dev = alloc_etherdev_mq(sizeof(struct ltq_vrx200_priv), 4); + strcpy(dev->name, "eth%d"); + dev->netdev_ops = <q_eth_netdev_ops; + priv = netdev_priv(dev); + priv->res = res; + priv->pldata = dev_get_platdata(&pdev->dev); + priv->netdev = dev; + + priv->clk_ppe = clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk_ppe)) + return PTR_ERR(priv->clk_ppe); + + spin_lock_init(&priv->lock); + + for (i = 0; i < MAX_DMA_CHAN; i++) { + if (IS_TX(i)) + netif_napi_add(dev, &priv->ch[i].napi, + ltq_vrx200_poll_tx, 8); + else if (IS_RX(i)) + netif_napi_add(dev, &priv->ch[i].napi, + ltq_vrx200_poll_rx, 32); + priv->ch[i].netdev = dev; + } + + err = register_netdev(dev); + if (err) + goto err_free; + + platform_set_drvdata(pdev, dev); + return 0; + +err_free: + kfree(dev); +err_out: + return err; +} + +static int __devexit +ltq_vrx200_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (dev) { + netif_tx_stop_all_queues(dev); + ltq_vrx200_hw_exit(dev); + ltq_vrx200_mdio_cleanup(dev); + unregister_netdev(dev); + } + return 0; +} + +static struct platform_driver ltq_mii_driver = { + .probe = ltq_vrx200_probe, + .remove = __devexit_p(ltq_vrx200_remove), + .driver = { + .name = "ltq_vrx200", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ltq_mii_driver); + +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("Lantiq SoC ETOP"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/files-3.3/drivers/net/ethernet/svip_eth.c b/target/linux/lantiq/files-3.3/drivers/net/ethernet/svip_eth.c new file mode 100644 index 0000000000..1e25795a2a --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/net/ethernet/svip_eth.c @@ -0,0 +1,636 @@ +/************************************************************************ + * + * Copyright (c) 2005 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <linux/in.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/checksum.h> + +#if 1 /** TODO: MOVE TO APPROPRIATE PLACE */ + +#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600 +#define REV_MII_MODE 2 + +#endif + +#define DRV_NAME "ifxmips_mii0" + +#include <lantiq_soc.h> +#include <svip_dma.h> + +#ifdef CONFIG_DEBUG_MINI_BOOT +#define IKOS_MINI_BOOT +#endif + +/* debugging */ +#undef INCAIP2_SW_DUMP + +#define INCAIP2_SW_EMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) + +#define INCAIP2_SW_CHIP_NO 1 +#define INCAIP2_SW_CHIP_ID 0 +#define INCAIP2_SW_DEVICE_NO 1 + +#ifdef INCAIP2_SW_DEBUG_MSG +#define INCAIP2_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) +#else +#define INCAIP2_SW_DMSG(fmt,args...) +#endif + +/************************** Module Parameters *****************************/ +static char *mode = "bridge"; +module_param(mode, charp, 0000); +MODULE_PARM_DESC(mode, "<description>"); + +#ifdef HAVE_TX_TIMEOUT +static int timeout = 10*HZ; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Transmission watchdog timeout in seconds>"); +#endif + +#ifdef IKOS_MINI_BOOT +#ifdef CONFIG_INCAIP2 +extern s32 incaip2_sw_to_mbx(struct sk_buff* skb); +#endif +extern s32 svip_sw_to_mbx(struct sk_buff* skb); +#endif + +struct svip_mii_priv { + struct net_device_stats stats; + struct dma_device_info *dma_device; + struct sk_buff *skb; +}; + +static struct net_device *svip_mii0_dev; +static unsigned char mac_addr[MAX_ADDR_LEN]; +static unsigned char my_ethaddr[MAX_ADDR_LEN]; + +/** + * Initialize MAC address. + * This function copies the ethernet address from kernel command line. + * + * \param line Pointer to parameter + * \return 0 OK + * \ingroup Internal + */ +static int __init svip_eth_ethaddr_setup(char *line) +{ + char *ep; + int i; + + memset(my_ethaddr, 0, MAX_ADDR_LEN); + /* there should really be routines to do this stuff */ + for (i = 0; i < 6; i++) + { + my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0; + if (line) + line = (*ep) ? ep+1 : ep; + } + INCAIP2_SW_DMSG("mac address %2x-%2x-%2x-%2x-%2x-%2x \n" + ,my_ethaddr[0] + ,my_ethaddr[1] + ,my_ethaddr[2] + ,my_ethaddr[3] + ,my_ethaddr[4] + ,my_ethaddr[5]); + return 0; +} +__setup("ethaddr=", svip_eth_ethaddr_setup); + + +/** + * Open RX DMA channels. + * This function opens all DMA rx channels. + * + * \param dma_dev pointer to DMA device information + * \ingroup Internal + */ +static void svip_eth_open_rx_dma(struct dma_device_info *dma_dev) +{ + int i; + + for(i=0; i<dma_dev->num_rx_chan; i++) + { + dma_dev->rx_chan[i]->open(dma_dev->rx_chan[i]); + } +} + + +/** + * Open TX DMA channels. + * This function opens all DMA tx channels. + * + * \param dev pointer to net device structure that comprises + * DMA device information pointed to by it's priv field. + * \ingroup Internal + */ +static void svip_eth_open_tx_dma(struct dma_device_info *dma_dev) +{ + int i; + + for (i=0; i<dma_dev->num_tx_chan; i++) + { + dma_dev->tx_chan[i]->open(dma_dev->tx_chan[i]); + } +} + + +#ifdef CONFIG_NET_HW_FLOWCONTROL +/** + * Enable receiving DMA. + * This function enables the receiving DMA channel. + * + * \param dev pointer to net device structure that comprises + * DMA device information pointed to by it's priv field. + * \ingroup Internal + */ +void svip_eth_xon(struct net_device *dev) +{ + struct switch_priv *sw_dev = (struct switch_priv *)dev->priv; + struct dma_device_info* dma_dev = + (struct dma_device_info *)sw_dev->dma_device; + unsigned long flag; + + local_irq_save(flag); + + INCAIP2_SW_DMSG("wakeup\n"); + svip_eth_open_rx_dma(dma_dev); + + local_irq_restore(flag); +} +#endif /* CONFIG_NET_HW_FLOWCONTROL */ + + +/** + * Open network device. + * This functions opens the network device and starts the interface queue. + * + * \param dev Device structure for Ethernet device + * \return 0 OK, device opened + * \return -1 Error, registering DMA device + * \ingroup API + */ +int svip_mii_open(struct net_device *dev) +{ + struct svip_mii_priv *priv = netdev_priv(dev); + struct dma_device_info *dma_dev = priv->dma_device; + + svip_eth_open_rx_dma(dma_dev); + svip_eth_open_tx_dma(dma_dev); + + netif_start_queue(dev); + return 0; +} + + +/** + * Close network device. + * This functions closes the network device, which will also stop the interface + * queue. + * + * \param dev Device structure for Ethernet device + * \return 0 OK, device closed (cannot fail) + * \ingroup API + */ +int svip_mii_release(struct net_device *dev) +{ + struct svip_mii_priv *priv = netdev_priv(dev); + struct dma_device_info *dma_dev = priv->dma_device; + int i; + + for (i = 0; i < dma_dev->max_rx_chan_num; i++) + dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]); + netif_stop_queue(dev); + return 0; +} + + +/** + * Read data from DMA device. + * This function reads data from the DMA device. The function is called by + * the switch/DMA pseudo interrupt handler dma_intr_handler on occurence of + * a DMA receive interrupt. + * + * \param dev Pointer to network device structure + * \param dma_dev Pointer to dma device structure + * \return OK In case of successful data reception from dma + * -EIO Incorrect opt pointer provided by device + * \ingroup Internal + */ +int svip_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev) +{ + struct svip_mii_priv *priv = netdev_priv(dev); + unsigned char *buf = NULL; + struct sk_buff *skb = NULL; + int len = 0; + + len = dma_device_read(dma_dev, &buf, (void **)&skb); + + if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE) { + printk(KERN_INFO DRV_NAME ": packet too large %d\n", len); + goto mii_hw_receive_err_exit; + } + + if (skb == NULL) { + printk(KERN_INFO DRV_NAME ": cannot restore pointer\n"); + goto mii_hw_receive_err_exit; + } + + if (len > (skb->end - skb->tail)) { + printk(KERN_INFO DRV_NAME ": BUG, len:%d end:%p tail:%p\n", + len, skb->end, skb->tail); + goto mii_hw_receive_err_exit; + } + + skb_put(skb, len); + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + + priv->stats.rx_packets++; + priv->stats.rx_bytes += len; + return 0; + +mii_hw_receive_err_exit: + if (len == 0) { + if (skb) + dev_kfree_skb_any(skb); + priv->stats.rx_errors++; + priv->stats.rx_dropped++; + return -EIO; + } else { + return len; + } +} + + +/** + * Write data to Ethernet switch. + * This function writes the data comprised in skb structure via DMA to the + * Ethernet Switch. It is installed as the switch driver's hard_start_xmit + * method. + * + * \param skb Pointer to socket buffer structure that contains the data + * to be sent + * \param dev Pointer to network device structure which is used for + * data transmission + * \return 1 Transmission error + * \return 0 OK, successful data transmission + * \ingroup API + */ +static int svip_mii_hw_tx(char *buf, int len, struct net_device *dev) +{ + int ret = 0; + struct svip_mii_priv *priv = netdev_priv(dev); + struct dma_device_info *dma_dev = priv->dma_device; + ret = dma_device_write(dma_dev, buf, len, priv->skb); + return ret; +} + +static int svip_mii_tx(struct sk_buff *skb, struct net_device *dev) +{ + int len; + char *data; + struct svip_mii_priv *priv = netdev_priv(dev); + struct dma_device_info *dma_dev = priv->dma_device; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + data = skb->data; + priv->skb = skb; + dev->trans_start = jiffies; + /* TODO: we got more than 1 dma channel, + so we should do something intelligent here to select one */ + dma_dev->current_tx_chan = 0; + + wmb(); + + if (svip_mii_hw_tx(data, len, dev) != len) { + dev_kfree_skb_any(skb); + priv->stats.tx_errors++; + priv->stats.tx_dropped++; + } else { + priv->stats.tx_packets++; + priv->stats.tx_bytes += len; + } + + return 0; +} + + +/** + * Transmission timeout callback. + * This functions is called when a trasmission timeout occurs. It will wake up + * the interface queue again. + * + * \param dev Device structure for Ethernet device + * \ingroup API + */ +void svip_mii_tx_timeout(struct net_device *dev) +{ + int i; + struct svip_mii_priv *priv = netdev_priv(dev); + + priv->stats.tx_errors++; + for (i = 0; i < priv->dma_device->max_tx_chan_num; i++) + priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]); + netif_wake_queue(dev); + return; +} + + +/** + * Get device statistics. + * This functions returns the device statistics, stored in the device structure. + * + * \param dev Device structure for Ethernet device + * \return stats Pointer to statistics structure + * \ingroup API + */ +static struct net_device_stats *svip_get_stats(struct net_device *dev) +{ + struct svip_mii_priv *priv = netdev_priv(dev); + return &priv->stats; +} + + +/** + * Pseudo Interrupt handler for DMA. + * This function processes DMA interrupts notified to the switch device driver. + * The function is installed at the DMA core as interrupt handler for the + * switch dma device. + * It handles the following DMA interrupts: + * passes received data to the upper layer in case of rx interrupt, + * In case of a dma receive interrupt the received data is passed to the upper layer. + * In case of a transmit buffer full interrupt the transmit queue is stopped. + * In case of a transmission complete interrupt the transmit queue is restarted. + * + * \param dma_dev pointer to dma device structure + * \param status type of interrupt being notified (RCV_INT: dma receive + * interrupt, TX_BUF_FULL_INT: transmit buffer full interrupt, + * TRANSMIT_CPT_INT: transmission complete interrupt) + * \return OK In case of successful data reception from dma + * \ingroup Internal + */ +int dma_intr_handler(struct dma_device_info *dma_dev, int status) +{ + int i; + + switch (status) { + case RCV_INT: + svip_mii_hw_receive(svip_mii0_dev, dma_dev); + break; + + case TX_BUF_FULL_INT: + printk(KERN_INFO DRV_NAME ": tx buffer full\n"); + netif_stop_queue(svip_mii0_dev); + for (i = 0; i < dma_dev->max_tx_chan_num; i++) { + if ((dma_dev->tx_chan[i])->control == LTQ_DMA_CH_ON) + dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]); + } + break; + + case TRANSMIT_CPT_INT: + +#if 0 + for (i = 0; i < dma_dev->max_tx_chan_num; i++) +#if 0 + dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]); +#else + dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i], (char *)__FUNCTION__); +#endif + netif_wake_queue(svip_mii0_dev); +#endif + break; + } + + return 0; +} + + +/** + * Allocates buffer sufficient for Ethernet Frame. + * This function is installed as DMA callback function to be called on DMA + * receive interrupt. + * + * \param len Unused + * \param *byte_offset Pointer to byte offset + * \param **opt pointer to skb structure + * \return NULL In case of buffer allocation fails + * buffer Pointer to allocated memory + * \ingroup Internal + */ +unsigned char *svip_etop_dma_buffer_alloc(int len, int *byte_offset, void **opt) +{ + unsigned char *buffer = NULL; + struct sk_buff *skb = NULL; + + skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE); + if (skb == NULL) + return NULL; + + buffer = (unsigned char *)(skb->data); + skb_reserve(skb, 2); + *(int *)opt = (int)skb; + *byte_offset = 2; + + return buffer; +} + + +/** + * Free DMA buffer. + * This function frees a buffer, which can be either a data buffer or an + * skb structure. + * + * \param *dataptr Pointer to data buffer + * \param *opt Pointer to skb structure + * \return 0 OK + * \ingroup Internal + */ +void svip_etop_dma_buffer_free(unsigned char *dataptr, void *opt) +{ + struct sk_buff *skb = NULL; + + if (opt == NULL) { + kfree(dataptr); + } else { + skb = (struct sk_buff *)opt; + dev_kfree_skb_any(skb); + } +} + +static int svip_mii_dev_init(struct net_device *dev); + +static const struct net_device_ops svip_eth_netdev_ops = { + .ndo_init = svip_mii_dev_init, + .ndo_open = svip_mii_open, + .ndo_stop = svip_mii_release, + .ndo_start_xmit = svip_mii_tx, + .ndo_get_stats = svip_get_stats, + .ndo_tx_timeout = svip_mii_tx_timeout, +}; + +//#include <linux/device.h> + +/** + * Initialize switch driver. + * This functions initializes the switch driver structures and registers the + * Ethernet device. + * + * \param dev Device structure for Ethernet device + * \return 0 OK + * \return ENOMEM No memory for structures available + * \return -1 Error during DMA init or Ethernet address configuration. + * \ingroup API + */ +static int svip_mii_dev_init(struct net_device *dev) +{ + int i; + struct svip_mii_priv *priv = netdev_priv(dev); + + + ether_setup(dev); + printk(KERN_INFO DRV_NAME ": %s is up\n", dev->name); + dev->watchdog_timeo = 10 * HZ; + memset(priv, 0, sizeof(*priv)); + priv->dma_device = dma_device_reserve("SW"); + if (!priv->dma_device) { + BUG(); + return -ENODEV; + } + priv->dma_device->buffer_alloc = svip_etop_dma_buffer_alloc; + priv->dma_device->buffer_free = svip_etop_dma_buffer_free; + priv->dma_device->intr_handler = dma_intr_handler; + + for (i = 0; i < priv->dma_device->max_rx_chan_num; i++) + priv->dma_device->rx_chan[i]->packet_size = + ETHERNET_PACKET_DMA_BUFFER_SIZE; + + for (i = 0; i < priv->dma_device->max_tx_chan_num; i++) { + priv->dma_device->tx_chan[i]->tx_weight=DEFAULT_SW_CHANNEL_WEIGHT; + priv->dma_device->tx_chan[i]->packet_size = + ETHERNET_PACKET_DMA_BUFFER_SIZE; + } + + dma_device_register(priv->dma_device); + + printk(KERN_INFO DRV_NAME ": using mac="); + + for (i = 0; i < 6; i++) { + dev->dev_addr[i] = mac_addr[i]; + printk("%02X%c", dev->dev_addr[i], (i == 5) ? ('\n') : (':')); + } + + return 0; +} + +static void svip_mii_chip_init(int mode) +{ +} + +static int svip_mii_probe(struct platform_device *dev) +{ + int result = 0; + unsigned char *mac = (unsigned char *)dev->dev.platform_data; + svip_mii0_dev = alloc_etherdev(sizeof(struct svip_mii_priv)); + svip_mii0_dev->netdev_ops = &svip_eth_netdev_ops; + memcpy(mac_addr, mac, 6); + strcpy(svip_mii0_dev->name, "eth%d"); + svip_mii_chip_init(REV_MII_MODE); + result = register_netdev(svip_mii0_dev); + if (result) { + printk(KERN_INFO DRV_NAME + ": error %i registering device \"%s\"\n", + result, svip_mii0_dev->name); + goto out; + } + printk(KERN_INFO DRV_NAME ": driver loaded!\n"); + +out: + return result; +} + +static int svip_mii_remove(struct platform_device *dev) +{ + struct svip_mii_priv *priv = netdev_priv(svip_mii0_dev); + + printk(KERN_INFO DRV_NAME ": cleanup\n"); + + dma_device_unregister(priv->dma_device); + dma_device_release(priv->dma_device); + kfree(priv->dma_device); + unregister_netdev(svip_mii0_dev); + free_netdev(svip_mii0_dev); + return 0; +} + + +static struct platform_driver svip_mii_driver = { + .probe = svip_mii_probe, + .remove = svip_mii_remove, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + + +/** + * Initialize switch driver as module. + * This functions initializes the switch driver structures and registers the + * Ethernet device for module usage. + * + * \return 0 OK + * \return ENODEV An error occured during initialization + * \ingroup API + */ +int __init svip_mii_init(void) +{ + int ret = platform_driver_register(&svip_mii_driver); + if (ret) + printk(KERN_INFO DRV_NAME + ": Error registering platfom driver!\n"); + return ret; +} + + +/** + * Remove driver module. + * This functions removes the driver and unregisters all devices. + * + * \ingroup API + */ +static void __exit svip_mii_cleanup(void) +{ + platform_driver_unregister(&svip_mii_driver); +} + +module_init(svip_mii_init); +module_exit(svip_mii_cleanup); + +MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/files-3.3/drivers/net/ethernet/svip_virtual_eth.c b/target/linux/lantiq/files-3.3/drivers/net/ethernet/svip_virtual_eth.c new file mode 100644 index 0000000000..6de0cfab8b --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/net/ethernet/svip_virtual_eth.c @@ -0,0 +1,346 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + Am Campeon 1-12; 81726 Munich, Germany + + THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE, + WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS + SOFTWARE IS FREE OF CHARGE. + + THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS + ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING + WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP, + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE + OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD + PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL + PROPERTY INFRINGEMENT. + + EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT + FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM + OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + **************************************************************************** +Module : svip_virtual_eth.c + +Description : This file contains network driver implementation for a +Virtual Ethernet interface. The Virtual Ethernet interface +is part of Infineon's VINETIC-SVIP Linux BSP. + *******************************************************************************/ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/etherdevice.h> +#include <linux/init.h> + +#define SVIP_VETH_VER_STR "3.0" +#define SVIP_VETH_INFO_STR \ + "@(#)SVIP virtual ethernet interface, version " SVIP_VETH_VER_STR + +/****************************************************************************** + * Local define/macro definitions + ******************************************************************************/ +struct svip_ve_priv +{ + struct net_device_stats stats; +}; + +/****************************************************************************** + * Global function declarations + ******************************************************************************/ +int svip_ve_rx(struct sk_buff *skb); + +/****************************************************************************** + * Local variable declarations + ******************************************************************************/ +static struct net_device *svip_ve_dev; +static int watchdog_timeout = 10*HZ; +static int (*svip_ve_mps_xmit)(struct sk_buff *skb) = NULL; + + +/****************************************************************************** + * Global function declarations + ******************************************************************************/ + +/** + * Called by MPS driver to register a transmit routine called for each outgoing + * VoFW0 message. + * + * \param mps_xmit pointer to transmit routine + * + * \return none + * + * \ingroup Internal + */ +void register_mps_xmit_routine(int (*mps_xmit)(struct sk_buff *skb)) +{ + svip_ve_mps_xmit = mps_xmit; +} +EXPORT_SYMBOL(register_mps_xmit_routine); + +/** + * Returns a pointer to the routine used to deliver an incoming packet/message + * from the MPS mailbox to the networking layer. This routine is called by MPS + * driver during initialisation time. + * + * \param skb pointer to incoming socket buffer + * + * \return svip_ve_rx pointer to incoming messages delivering routine + * + * \ingroup Internal + */ +int (*register_mps_recv_routine(void)) (struct sk_buff *skb) +{ + return svip_ve_rx; +} + +/** + * Used to deliver outgoing packets to VoFW0 module through the MPS driver. + * Upon loading/initialisation the MPS driver is registering a transmitting + * routine, which is called here to deliver the packet to the VoFW0 module. + * + * \param skb pointer to skb containing outgoing data + * \param dev pointer to this networking device's data + * + * \return 0 on success + * \return non-zero on error + * + * \ingroup Internal + */ +static int svip_ve_xmit(struct sk_buff *skb, struct net_device *dev) +{ + int err; + struct svip_ve_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + stats->tx_packets++; + stats->tx_bytes += skb->len; + + if (svip_ve_mps_xmit) + { + err = svip_ve_mps_xmit(skb); + if (err) + stats->tx_errors++; + dev->trans_start = jiffies; + return err; + } + else + printk(KERN_ERR "%s: MPS driver not registered, outgoing packet not delivered\n", dev->name); + + dev_kfree_skb(skb); + + return -1; +} + +/** + * Called by MPS driver upon receipt of a new message from VoFW0 module in + * the data inbox. The packet is pushed up the IP module for further processing. + * + * \param skb pointer to skb containing the incoming message + * + * \return 0 on success + * \return non-zero on error + * + * \ingroup Internal + */ +int svip_ve_rx(struct sk_buff *skb) +{ + int err; + struct svip_ve_priv *priv = netdev_priv(svip_ve_dev); + struct net_device_stats *stats = &priv->stats; + + skb->dev = svip_ve_dev; + skb->protocol = eth_type_trans(skb, svip_ve_dev); + + stats->rx_packets++; + stats->rx_bytes += skb->len; + + err = netif_rx(skb); + switch (err) + { + case NET_RX_SUCCESS: + return 0; + break; + case NET_RX_DROP: + default: + stats->rx_dropped++; + break; + } + + return 1; +} +EXPORT_SYMBOL(svip_ve_rx); + +/** + * Returns a pointer to the device's networking statistics data + * + * \param dev pointer to this networking device's data + * + * \return stats pointer to this network device's statistics data + * + * \ingroup Internal + */ +static struct net_device_stats *svip_ve_get_stats(struct net_device *dev) +{ + struct svip_ve_priv *priv = netdev_priv(dev); + + return &priv->stats; +} + +static void svip_ve_tx_timeout(struct net_device *dev) +{ + struct svip_ve_priv *priv = netdev_priv(dev); + + priv->stats.tx_errors++; + netif_wake_queue(dev); +} + +/** + * Device open routine. Called e.g. upon setting of an IP address using, + * 'ifconfig veth0 YYY.YYY.YYY.YYY netmask ZZZ.ZZZ.ZZZ.ZZZ' or + * 'ifconfig veth0 up' + * + * \param dev pointer to this network device's data + * + * \return 0 on success + * \return non-zero on error + * + * \ingroup Internal + */ +int svip_ve_open(struct net_device *dev) +{ + netif_start_queue(dev); + return 0; +} + +/** + * Device close routine. Called e.g. upon calling + * 'ifconfig veth0 down' + * + * \param dev pointer to this network device's data + * + * \return 0 on success + * \return non-zero on error + * + * \ingroup Internal + */ + +int svip_ve_release(struct net_device *dev) +{ + netif_stop_queue(dev); + return 0; +} + +static int svip_ve_dev_init(struct net_device *dev); + +static const struct net_device_ops svip_virtual_eth_netdev_ops = { + .ndo_init = svip_ve_dev_init, + .ndo_open = svip_ve_open, + .ndo_stop = svip_ve_release, + .ndo_start_xmit = svip_ve_xmit, + .ndo_get_stats = svip_ve_get_stats, + .ndo_tx_timeout = svip_ve_tx_timeout, +}; + + +/** + * Device initialisation routine which registers device interface routines. + * It is called upon execution of 'register_netdev' routine. + * + * \param dev pointer to this network device's data + * + * \return 0 on success + * \return non-zero on error + * + * \ingroup Internal + */ +static int svip_ve_dev_init(struct net_device *dev) +{ + ether_setup(dev); /* assign some of the fields */ + + dev->watchdog_timeo = watchdog_timeout; + memset(netdev_priv(dev), 0, sizeof(struct svip_ve_priv)); + dev->flags |= IFF_NOARP|IFF_PROMISC; + dev->flags &= ~IFF_MULTICAST; + + /* dedicated MAC address to veth0, 00:03:19:00:15:80 */ + dev->dev_addr[0] = 0x00; + dev->dev_addr[1] = 0x03; + dev->dev_addr[2] = 0x19; + dev->dev_addr[3] = 0x00; + dev->dev_addr[4] = 0x15; + dev->dev_addr[5] = 0x80; + + return 0; +} + +static int svip_ve_probe(struct platform_device *dev) +{ + int result = 0; + + svip_ve_dev = alloc_etherdev(sizeof(struct svip_ve_priv)); + svip_ve_dev->netdev_ops = &svip_virtual_eth_netdev_ops; + + strcpy(svip_ve_dev->name, "veth%d"); + + result = register_netdev(svip_ve_dev); + if (result) + { + printk(KERN_INFO "error %i registering device \"%s\"\n", result, svip_ve_dev->name); + goto out; + } + + printk (KERN_INFO "%s, (c) 2009, Lantiq Deutschland GmbH\n", &SVIP_VETH_INFO_STR[4]); + +out: + return result; +} + +static int svip_ve_remove(struct platform_device *dev) +{ + unregister_netdev(svip_ve_dev); + free_netdev(svip_ve_dev); + + printk(KERN_INFO "%s removed\n", svip_ve_dev->name); + return 0; +} + +static struct platform_driver svip_ve_driver = { + .probe = svip_ve_probe, + .remove = svip_ve_remove, + .driver = { + .name = "ifxmips_svip_ve", + .owner = THIS_MODULE, + }, +}; + +/** + * Module/driver entry routine + */ +static int __init svip_ve_init_module(void) +{ + int ret; + + ret = platform_driver_register(&svip_ve_driver); + if (ret) + printk(KERN_INFO "SVIP: error(%d) registering virtual Ethernet driver!\n", ret); + return ret; +} + +/** + * Module exit routine (never called for statically linked driver) + */ +static void __exit svip_ve_cleanup_module(void) +{ + platform_driver_unregister(&svip_ve_driver); +} + +module_init(svip_ve_init_module); +module_exit(svip_ve_cleanup_module); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("virtual ethernet driver for LANTIQ SVIP system"); + +EXPORT_SYMBOL(register_mps_recv_routine); diff --git a/target/linux/lantiq/files-3.3/drivers/spi/spi-falcon.c b/target/linux/lantiq/files-3.3/drivers/spi/spi-falcon.c new file mode 100644 index 0000000000..447bbaaa34 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/spi/spi-falcon.c @@ -0,0 +1,483 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> +#include <linux/workqueue.h> + +#include <lantiq_soc.h> + +#define DRV_NAME "falcon_spi" + +#define FALCON_SPI_XFER_BEGIN (1 << 0) +#define FALCON_SPI_XFER_END (1 << 1) + +/* Bus Read Configuration Register0 */ +#define LTQ_BUSRCON0 0x00000010 +/* Bus Write Configuration Register0 */ +#define LTQ_BUSWCON0 0x00000018 +/* Serial Flash Configuration Register */ +#define LTQ_SFCON 0x00000080 +/* Serial Flash Time Register */ +#define LTQ_SFTIME 0x00000084 +/* Serial Flash Status Register */ +#define LTQ_SFSTAT 0x00000088 +/* Serial Flash Command Register */ +#define LTQ_SFCMD 0x0000008C +/* Serial Flash Address Register */ +#define LTQ_SFADDR 0x00000090 +/* Serial Flash Data Register */ +#define LTQ_SFDATA 0x00000094 +/* Serial Flash I/O Control Register */ +#define LTQ_SFIO 0x00000098 +/* EBU Clock Control Register */ +#define LTQ_EBUCC 0x000000C4 + +/* Dummy Phase Length */ +#define SFCMD_DUMLEN_OFFSET 16 +#define SFCMD_DUMLEN_MASK 0x000F0000 +/* Chip Select */ +#define SFCMD_CS_OFFSET 24 +#define SFCMD_CS_MASK 0x07000000 +/* field offset */ +#define SFCMD_ALEN_OFFSET 20 +#define SFCMD_ALEN_MASK 0x00700000 +/* SCK Rise-edge Position */ +#define SFTIME_SCKR_POS_OFFSET 8 +#define SFTIME_SCKR_POS_MASK 0x00000F00 +/* SCK Period */ +#define SFTIME_SCK_PER_OFFSET 0 +#define SFTIME_SCK_PER_MASK 0x0000000F +/* SCK Fall-edge Position */ +#define SFTIME_SCKF_POS_OFFSET 12 +#define SFTIME_SCKF_POS_MASK 0x0000F000 +/* Device Size */ +#define SFCON_DEV_SIZE_A23_0 0x03000000 +#define SFCON_DEV_SIZE_MASK 0x0F000000 +/* Read Data Position */ +#define SFTIME_RD_POS_MASK 0x000F0000 +/* Data Output */ +#define SFIO_UNUSED_WD_MASK 0x0000000F +/* Command Opcode mask */ +#define SFCMD_OPC_MASK 0x000000FF +/* dlen bytes of data to write */ +#define SFCMD_DIR_WRITE 0x00000100 +/* Data Length offset */ +#define SFCMD_DLEN_OFFSET 9 +/* Command Error */ +#define SFSTAT_CMD_ERR 0x20000000 +/* Access Command Pending */ +#define SFSTAT_CMD_PEND 0x00400000 +/* Frequency set to 100MHz. */ +#define EBUCC_EBUDIV_SELF100 0x00000001 +/* Serial Flash */ +#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000 +/* 8-bit multiplexed */ +#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000 +/* Serial Flash */ +#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000 +/* Chip Select after opcode */ +#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000 + +struct falcon_spi { + u32 sfcmd; /* for caching of opcode, direction, ... */ + struct spi_master *master; +}; + +int +falcon_spi_xfer(struct spi_device *spi, + struct spi_transfer *t, + unsigned long flags) +{ + struct device *dev = &spi->dev; + struct falcon_spi *priv = spi_master_get_devdata(spi->master); + const u8 *txp = t->tx_buf; + u8 *rxp = t->rx_buf; + unsigned int bytelen = ((8 * t->len + 7) / 8); + unsigned int len, alen, dumlen; + u32 val; + enum { + state_init, + state_command_prepare, + state_write, + state_read, + state_disable_cs, + state_end + } state = state_init; + + do { + switch (state) { + case state_init: /* detect phase of upper layer sequence */ + { + /* initial write ? */ + if (flags & FALCON_SPI_XFER_BEGIN) { + if (!txp) { + dev_err(dev, + "BEGIN without tx data!\n"); + return -1; + } + /* + * Prepare the parts of the sfcmd register, + * which should not + * change during a sequence! + * Only exception are the length fields, + * especially alen and dumlen. + */ + + priv->sfcmd = ((spi->chip_select + << SFCMD_CS_OFFSET) + & SFCMD_CS_MASK); + priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED; + priv->sfcmd |= *txp; + txp++; + bytelen--; + if (bytelen) { + /* + * more data: + * maybe address and/or dummy + */ + state = state_command_prepare; + break; + } else { + dev_dbg(dev, "write cmd %02X\n", + priv->sfcmd & SFCMD_OPC_MASK); + } + } + /* continued write ? */ + if (txp && bytelen) { + state = state_write; + break; + } + /* read data? */ + if (rxp && bytelen) { + state = state_read; + break; + } + /* end of sequence? */ + if (flags & FALCON_SPI_XFER_END) + state = state_disable_cs; + else + state = state_end; + break; + } + /* collect tx data for address and dummy phase */ + case state_command_prepare: + { + /* txp is valid, already checked */ + val = 0; + alen = 0; + dumlen = 0; + while (bytelen > 0) { + if (alen < 3) { + val = (val<<8)|(*txp++); + alen++; + } else if ((dumlen < 15) && (*txp == 0)) { + /* + * assume dummy bytes are set to 0 + * from upper layer + */ + dumlen++; + txp++; + } else + break; + bytelen--; + } + priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK); + priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) | + (dumlen << SFCMD_DUMLEN_OFFSET); + if (alen > 0) + ltq_ebu_w32(val, LTQ_SFADDR); + + dev_dbg(dev, "write cmd %02X, alen=%d " + "(addr=%06X) dumlen=%d\n", + priv->sfcmd & SFCMD_OPC_MASK, + alen, val, dumlen); + + if (bytelen > 0) { + /* continue with write */ + state = state_write; + } else if (flags & FALCON_SPI_XFER_END) { + /* end of sequence? */ + state = state_disable_cs; + } else { + /* + * go to end and expect another + * call (read or write) + */ + state = state_end; + } + break; + } + case state_write: + { + /* txp still valid */ + priv->sfcmd |= SFCMD_DIR_WRITE; + len = 0; + val = 0; + do { + if (bytelen--) + val |= (*txp++) << (8 * len++); + if ((flags & FALCON_SPI_XFER_END) + && (bytelen == 0)) { + priv->sfcmd &= + ~SFCMD_KEEP_CS_KEEP_SELECTED; + } + if ((len == 4) || (bytelen == 0)) { + ltq_ebu_w32(val, LTQ_SFDATA); + ltq_ebu_w32(priv->sfcmd + | (len<<SFCMD_DLEN_OFFSET), + LTQ_SFCMD); + len = 0; + val = 0; + priv->sfcmd &= ~(SFCMD_ALEN_MASK + | SFCMD_DUMLEN_MASK); + } + } while (bytelen); + state = state_end; + break; + } + case state_read: + { + /* read data */ + priv->sfcmd &= ~SFCMD_DIR_WRITE; + do { + if ((flags & FALCON_SPI_XFER_END) + && (bytelen <= 4)) { + priv->sfcmd &= + ~SFCMD_KEEP_CS_KEEP_SELECTED; + } + len = (bytelen > 4) ? 4 : bytelen; + bytelen -= len; + ltq_ebu_w32(priv->sfcmd + |(len<<SFCMD_DLEN_OFFSET), LTQ_SFCMD); + priv->sfcmd &= ~(SFCMD_ALEN_MASK + | SFCMD_DUMLEN_MASK); + do { + val = ltq_ebu_r32(LTQ_SFSTAT); + if (val & SFSTAT_CMD_ERR) { + /* reset error status */ + dev_err(dev, "SFSTAT: CMD_ERR " + "(%x)\n", val); + ltq_ebu_w32(SFSTAT_CMD_ERR, + LTQ_SFSTAT); + return -1; + } + } while (val & SFSTAT_CMD_PEND); + val = ltq_ebu_r32(LTQ_SFDATA); + do { + *rxp = (val & 0xFF); + rxp++; + val >>= 8; + len--; + } while (len); + } while (bytelen); + state = state_end; + break; + } + case state_disable_cs: + { + priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED; + ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET), + LTQ_SFCMD); + val = ltq_ebu_r32(LTQ_SFSTAT); + if (val & SFSTAT_CMD_ERR) { + /* reset error status */ + dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val); + ltq_ebu_w32(SFSTAT_CMD_ERR, LTQ_SFSTAT); + return -1; + } + state = state_end; + break; + } + case state_end: + break; + } + } while (state != state_end); + + return 0; +} + +static int +falcon_spi_setup(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + const u32 ebuclk = 100000000; + unsigned int i; + unsigned long flags; + + dev_dbg(dev, "setup\n"); + + if (spi->master->bus_num > 0 || spi->chip_select > 0) + return -ENODEV; + + spin_lock_irqsave(&ebu_lock, flags); + + if (ebuclk < spi->max_speed_hz) { + /* set EBU clock to 100 MHz */ + ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, LTQ_EBUCC); + i = 1; /* divider */ + } else { + /* set EBU clock to 50 MHz */ + ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, LTQ_EBUCC); + + /* search for suitable divider */ + for (i = 1; i < 7; i++) { + if (ebuclk / i <= spi->max_speed_hz) + break; + } + } + + /* setup period of serial clock */ + ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK + | SFTIME_SCKR_POS_MASK + | SFTIME_SCK_PER_MASK, + (i << SFTIME_SCKR_POS_OFFSET) + | (i << (SFTIME_SCK_PER_OFFSET + 1)), + LTQ_SFTIME); + + /* + * set some bits of unused_wd, to not trigger HOLD/WP + * signals on non QUAD flashes + */ + ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), LTQ_SFIO); + + ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX, + LTQ_BUSRCON0); + ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, LTQ_BUSWCON0); + /* set address wrap around to maximum for 24-bit addresses */ + ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, LTQ_SFCON); + + spin_unlock_irqrestore(&ebu_lock, flags); + + return 0; +} + +static int +falcon_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct falcon_spi *priv = spi_master_get_devdata(spi->master); + struct spi_transfer *t; + unsigned long spi_flags; + unsigned long flags; + int ret = 0; + + priv->sfcmd = 0; + m->actual_length = 0; + + spi_flags = FALCON_SPI_XFER_BEGIN; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (list_is_last(&t->transfer_list, &m->transfers)) + spi_flags |= FALCON_SPI_XFER_END; + + spin_lock_irqsave(&ebu_lock, flags); + ret = falcon_spi_xfer(spi, t, spi_flags); + spin_unlock_irqrestore(&ebu_lock, flags); + + if (ret) + break; + + m->actual_length += t->len; + + if (t->delay_usecs || t->cs_change) + BUG(); + + spi_flags = 0; + } + + m->status = ret; + m->complete(m->context); + + return 0; +} + +static void +falcon_spi_cleanup(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + + dev_dbg(dev, "cleanup\n"); +} + +static int __devinit +falcon_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct falcon_spi *priv; + struct spi_master *master; + int ret; + + dev_dbg(dev, "probing\n"); + + master = spi_alloc_master(&pdev->dev, sizeof(*priv)); + if (!master) { + dev_err(dev, "no memory for spi_master\n"); + return -ENOMEM; + } + + priv = spi_master_get_devdata(master); + priv->master = master; + + master->mode_bits = SPI_MODE_3; + master->num_chipselect = 1; + master->bus_num = 0; + + master->setup = falcon_spi_setup; + master->transfer = falcon_spi_transfer; + master->cleanup = falcon_spi_cleanup; + + platform_set_drvdata(pdev, priv); + + ret = spi_register_master(master); + if (ret) + spi_master_put(master); + + return ret; +} + +static int __devexit +falcon_spi_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct falcon_spi *priv = platform_get_drvdata(pdev); + + dev_dbg(dev, "removed\n"); + + spi_unregister_master(priv->master); + + return 0; +} + +static struct platform_driver falcon_spi_driver = { + .probe = falcon_spi_probe, + .remove = __devexit_p(falcon_spi_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE + } +}; + +static int __init +falcon_spi_init(void) +{ + return platform_driver_register(&falcon_spi_driver); +} + +static void __exit +falcon_spi_exit(void) +{ + platform_driver_unregister(&falcon_spi_driver); +} + +module_init(falcon_spi_init); +module_exit(falcon_spi_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver"); diff --git a/target/linux/lantiq/files-3.3/drivers/spi/spi-xway.c b/target/linux/lantiq/files-3.3/drivers/spi/spi-xway.c new file mode 100644 index 0000000000..be5c25b1fe --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/spi/spi-xway.c @@ -0,0 +1,1070 @@ +/* + * Lantiq SoC SPI controller + * + * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> + +#include <lantiq_soc.h> +#include <lantiq_platform.h> + +#define LTQ_SPI_CLC 0x00 /* Clock control */ +#define LTQ_SPI_PISEL 0x04 /* Port input select */ +#define LTQ_SPI_ID 0x08 /* Identification */ +#define LTQ_SPI_CON 0x10 /* Control */ +#define LTQ_SPI_STAT 0x14 /* Status */ +#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */ +#define LTQ_SPI_TB 0x20 /* Transmit buffer */ +#define LTQ_SPI_RB 0x24 /* Receive buffer */ +#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */ +#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */ +#define LTQ_SPI_FSTAT 0x38 /* FIFO status */ +#define LTQ_SPI_BRT 0x40 /* Baudrate timer */ +#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */ +#define LTQ_SPI_SFCON 0x60 /* Serial frame control */ +#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */ +#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */ +#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */ +#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */ +#define LTQ_SPI_RXREQ 0x80 /* Receive request */ +#define LTQ_SPI_RXCNT 0x84 /* Receive count */ +#define LTQ_SPI_DMACON 0xEC /* DMA control */ +#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */ +#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */ +#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */ + +#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */ +#define LTQ_SPI_CLC_SMC_MASK 0xFF +#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */ +#define LTQ_SPI_CLC_RMC_MASK 0xFF +#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ +#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ + +#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */ +#define LTQ_SPI_ID_TXFS_MASK 0x3F +#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */ +#define LTQ_SPI_ID_RXFS_MASK 0x3F +#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */ +#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */ + +#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */ +#define LTQ_SPI_CON_BM_MASK 0x1F +#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ +#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ +#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ +#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ +#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ +#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ +#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ +#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ +#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ +#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ +#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ +#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ +#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ +#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ + +#define LTQ_SPI_STAT_RXBV_MASK 0x7 +#define LTQ_SPI_STAT_RXBV_SHIFT 28 +#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ +#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ +#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ +#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ +#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ +#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ +#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ +#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ + +#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ +#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ +#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ +#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ +#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ +#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ +#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ +#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ +#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ +#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ +#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ +#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ +#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ +#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ +#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ +#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ +#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50 + +#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */ +#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F +#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ +#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ + +#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */ +#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F +#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ +#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ + +#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f +#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0 +#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f +#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8 + +#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8 +#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0 + +#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8 +#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0 + +#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */ +#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */ + +#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ +#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ +#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ +#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ +#define LTQ_SPI_IRNEN_ALL 0xF + +/* Hard-wired GPIOs used by SPI controller */ +#define LTQ_SPI_GPIO_DI (ltq_is_ase()? 8 : 16) +#define LTQ_SPI_GPIO_DO (ltq_is_ase()? 9 : 17) +#define LTQ_SPI_GPIO_CLK (ltq_is_ase()? 10 : 18) + +struct ltq_spi { + struct spi_bitbang bitbang; + struct completion done; + spinlock_t lock; + + struct device *dev; + void __iomem *base; + struct clk *fpiclk; + struct clk *spiclk; + + int status; + int irq[3]; + + const u8 *tx; + u8 *rx; + u32 tx_cnt; + u32 rx_cnt; + u32 len; + struct spi_transfer *curr_transfer; + + u32 (*get_tx) (struct ltq_spi *); + + u16 txfs; + u16 rxfs; + unsigned dma_support:1; + unsigned cfg_mode:1; + +}; + +struct ltq_spi_controller_state { + void (*cs_activate) (struct spi_device *); + void (*cs_deactivate) (struct spi_device *); +}; + +struct ltq_spi_irq_map { + char *name; + irq_handler_t handler; +}; + +struct ltq_spi_cs_gpio_map { + unsigned gpio; + unsigned mux; +}; + +static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi) +{ + return spi_master_get_devdata(spi->master); +} + +static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg) +{ + return ioread32be(hw->base + reg); +} + +static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg) +{ + iowrite32be(val, hw->base + reg); +} + +static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg) +{ + u32 val; + + val = ltq_spi_reg_read(hw, reg); + val |= bits; + ltq_spi_reg_write(hw, val, reg); +} + +static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg) +{ + u32 val; + + val = ltq_spi_reg_read(hw, reg); + val &= ~bits; + ltq_spi_reg_write(hw, val, reg); +} + +static void ltq_spi_hw_enable(struct ltq_spi *hw) +{ + u32 clc; + + /* Power-up mdule */ + clk_enable(hw->spiclk); + + /* + * Set clock divider for run mode to 1 to + * run at same frequency as FPI bus + */ + clc = (1 << LTQ_SPI_CLC_RMC_SHIFT); + ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC); +} + +static void ltq_spi_hw_disable(struct ltq_spi *hw) +{ + /* Set clock divider to 0 and set module disable bit */ + ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC); + + /* Power-down mdule */ + clk_disable(hw->spiclk); +} + +static void ltq_spi_reset_fifos(struct ltq_spi *hw) +{ + u32 val; + + /* + * Enable and flush FIFOs. Set interrupt trigger level to + * half of FIFO count implemented in hardware. + */ + if (hw->txfs > 1) { + val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1); + val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; + ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON); + } + + if (hw->rxfs > 1) { + val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1); + val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; + ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON); + } +} + +static inline int ltq_spi_wait_ready(struct ltq_spi *hw) +{ + u32 stat; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(200); + + do { + stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT); + if (!(stat & LTQ_SPI_STAT_BSY)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, timeout)); + + dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat); + + return -ETIMEDOUT; +} + +static void ltq_spi_config_mode_set(struct ltq_spi *hw) +{ + if (hw->cfg_mode) + return; + + /* + * Putting the SPI module in config mode is only safe if no + * transfer is in progress as indicated by busy flag STATE.BSY. + */ + if (ltq_spi_wait_ready(hw)) { + ltq_spi_reset_fifos(hw); + hw->status = -ETIMEDOUT; + } + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); + + hw->cfg_mode = 1; +} + +static void ltq_spi_run_mode_set(struct ltq_spi *hw) +{ + if (!hw->cfg_mode) + return; + + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); + + hw->cfg_mode = 0; +} + +static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw) +{ + const u8 *tx = hw->tx; + u32 data = *tx++; + + hw->tx_cnt++; + hw->tx++; + + return data; +} + +static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw) +{ + const u16 *tx = (u16 *) hw->tx; + u32 data = *tx++; + + hw->tx_cnt += 2; + hw->tx += 2; + + return data; +} + +static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw) +{ + const u32 *tx = (u32 *) hw->tx; + u32 data = *tx++; + + hw->tx_cnt += 4; + hw->tx += 4; + + return data; +} + +static void ltq_spi_bits_per_word_set(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 bm; + u8 bits_per_word = spi->bits_per_word; + + /* + * Use either default value of SPI device or value + * from current transfer. + */ + if (hw->curr_transfer && hw->curr_transfer->bits_per_word) + bits_per_word = hw->curr_transfer->bits_per_word; + + if (bits_per_word <= 8) + hw->get_tx = ltq_spi_tx_word_u8; + else if (bits_per_word <= 16) + hw->get_tx = ltq_spi_tx_word_u16; + else if (bits_per_word <= 32) + hw->get_tx = ltq_spi_tx_word_u32; + + /* CON.BM value = bits_per_word - 1 */ + bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT; + + ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK << + LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON); + ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON); +} + +static void ltq_spi_speed_set(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 br, max_speed_hz, spi_clk; + u32 speed_hz = spi->max_speed_hz; + + /* + * Use either default value of SPI device or value + * from current transfer. + */ + if (hw->curr_transfer && hw->curr_transfer->speed_hz) + speed_hz = hw->curr_transfer->speed_hz; + + /* + * SPI module clock is derived from FPI bus clock dependent on + * divider value in CLC.RMS which is always set to 1. + */ + spi_clk = clk_get_rate(hw->fpiclk); + + /* + * Maximum SPI clock frequency in master mode is half of + * SPI module clock frequency. Maximum reload value of + * baudrate generator BR is 2^16. + */ + max_speed_hz = spi_clk / 2; + if (speed_hz >= max_speed_hz) + br = 0; + else + br = (max_speed_hz / speed_hz) - 1; + + if (br > 0xFFFF) + br = 0xFFFF; + + ltq_spi_reg_write(hw, br, LTQ_SPI_BRT); +} + +static void ltq_spi_clockmode_set(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 con; + + con = ltq_spi_reg_read(hw, LTQ_SPI_CON); + + /* + * SPI mode mapping in CON register: + * Mode CPOL CPHA CON.PO CON.PH + * 0 0 0 0 1 + * 1 0 1 0 0 + * 2 1 0 1 1 + * 3 1 1 1 0 + */ + if (spi->mode & SPI_CPHA) + con &= ~LTQ_SPI_CON_PH; + else + con |= LTQ_SPI_CON_PH; + + if (spi->mode & SPI_CPOL) + con |= LTQ_SPI_CON_PO; + else + con &= ~LTQ_SPI_CON_PO; + + /* Set heading control */ + if (spi->mode & SPI_LSB_FIRST) + con &= ~LTQ_SPI_CON_HB; + else + con |= LTQ_SPI_CON_HB; + + ltq_spi_reg_write(hw, con, LTQ_SPI_CON); +} + +static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t) +{ + u32 con; + + con = ltq_spi_reg_read(hw, LTQ_SPI_CON); + + if (t) { + if (t->tx_buf && t->rx_buf) { + con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); + } else if (t->rx_buf) { + con &= ~LTQ_SPI_CON_RXOFF; + con |= LTQ_SPI_CON_TXOFF; + } else if (t->tx_buf) { + con &= ~LTQ_SPI_CON_TXOFF; + con |= LTQ_SPI_CON_RXOFF; + } + } else + con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); + + ltq_spi_reg_write(hw, con, LTQ_SPI_CON); +} + +static void ltq_spi_gpio_cs_activate(struct spi_device *spi) +{ + struct ltq_spi_controller_data *cdata = spi->controller_data; + int val = spi->mode & SPI_CS_HIGH ? 1 : 0; + + gpio_set_value(cdata->gpio, val); +} + +static void ltq_spi_gpio_cs_deactivate(struct spi_device *spi) +{ + struct ltq_spi_controller_data *cdata = spi->controller_data; + int val = spi->mode & SPI_CS_HIGH ? 0 : 1; + + gpio_set_value(cdata->gpio, val); +} + +static void ltq_spi_internal_cs_activate(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 fgpo; + + fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT)); + ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); +} + +static void ltq_spi_internal_cs_deactivate(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 fgpo; + + fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); + ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); +} + +static void ltq_spi_chipselect(struct spi_device *spi, int cs) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + struct ltq_spi_controller_state *cstate = spi->controller_state; + + switch (cs) { + case BITBANG_CS_ACTIVE: + ltq_spi_bits_per_word_set(spi); + ltq_spi_speed_set(spi); + ltq_spi_clockmode_set(spi); + ltq_spi_run_mode_set(hw); + + cstate->cs_activate(spi); + break; + + case BITBANG_CS_INACTIVE: + cstate->cs_deactivate(spi); + + ltq_spi_config_mode_set(hw); + + break; + } +} + +static int ltq_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u8 bits_per_word = spi->bits_per_word; + + hw->curr_transfer = t; + + if (t && t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (bits_per_word > 32) + return -EINVAL; + + ltq_spi_config_mode_set(hw); + + return 0; +} + +static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = { + { 15, 2 }, + { 22, 2 }, + { 13, 1 }, + { 10, 1 }, + { 9, 1 }, + { 11, 3 }, +}; + +static const struct ltq_spi_cs_gpio_map ltq_spi_cs_ase[] = { + { 7, 2 }, + { 15, 1 }, + { 14, 1 }, +}; + +static int ltq_spi_setup(struct spi_device *spi) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + struct ltq_spi_controller_data *cdata = spi->controller_data; + struct ltq_spi_controller_state *cstate; + u32 gpocon, fgpo; + int ret; + + /* Set default word length to 8 if not set */ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + if (spi->bits_per_word > 32) + return -EINVAL; + + if (!spi->controller_state) { + cstate = kzalloc(sizeof(struct ltq_spi_controller_state), + GFP_KERNEL); + if (!cstate) + return -ENOMEM; + + spi->controller_state = cstate; + } else + return 0; + + /* + * Up to six GPIOs can be connected to the SPI module + * via GPIO alternate function to control the chip select lines. + * For more flexibility in board layout this driver can also control + * the CS lines via GPIO API. If GPIOs should be used, board setup code + * have to register the SPI device with struct ltq_spi_controller_data + * attached. + */ + if (cdata && cdata->gpio) { + ret = gpio_request(cdata->gpio, "spi-cs"); + if (ret) + return -EBUSY; + + ret = spi->mode & SPI_CS_HIGH ? 0 : 1; + gpio_direction_output(cdata->gpio, ret); + + cstate->cs_activate = ltq_spi_gpio_cs_activate; + cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate; + } else { + struct ltq_spi_cs_gpio_map *cs_map = + ltq_is_ase() ? ltq_spi_cs_ase : ltq_spi_cs; + ret = ltq_gpio_request(&spi->dev, cs_map[spi->chip_select].gpio, + cs_map[spi->chip_select].mux, + 1, "spi-cs"); + if (ret) + return -EBUSY; + + gpocon = (1 << (spi->chip_select + + LTQ_SPI_GPOCON_ISCSBN_SHIFT)); + + if (spi->mode & SPI_CS_HIGH) + gpocon |= (1 << spi->chip_select); + + fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); + + ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON); + ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); + + cstate->cs_activate = ltq_spi_internal_cs_activate; + cstate->cs_deactivate = ltq_spi_internal_cs_deactivate; + } + + return 0; +} + +static void ltq_spi_cleanup(struct spi_device *spi) +{ + struct ltq_spi_controller_data *cdata = spi->controller_data; + struct ltq_spi_controller_state *cstate = spi->controller_state; + unsigned gpio; + + if (cdata && cdata->gpio) + gpio = cdata->gpio; + else + gpio = ltq_is_ase() ? ltq_spi_cs_ase[spi->chip_select].gpio : + ltq_spi_cs[spi->chip_select].gpio; + + gpio_free(gpio); + kfree(cstate); +} + +static void ltq_spi_txfifo_write(struct ltq_spi *hw) +{ + u32 fstat, data; + u16 fifo_space; + + /* Determine how much FIFOs are free for TX data */ + fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); + fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) & + LTQ_SPI_FSTAT_TXFFL_MASK); + + if (!fifo_space) + return; + + while (hw->tx_cnt < hw->len && fifo_space) { + data = hw->get_tx(hw); + ltq_spi_reg_write(hw, data, LTQ_SPI_TB); + fifo_space--; + } +} + +static void ltq_spi_rxfifo_read(struct ltq_spi *hw) +{ + u32 fstat, data, *rx32; + u16 fifo_fill; + u8 rxbv, shift, *rx8; + + /* Determine how much FIFOs are filled with RX data */ + fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); + fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT) + & LTQ_SPI_FSTAT_RXFFL_MASK); + + if (!fifo_fill) + return; + + /* + * The 32 bit FIFO is always used completely independent from the + * bits_per_word value. Thus four bytes have to be read at once + * per FIFO. + */ + rx32 = (u32 *) hw->rx; + while (hw->len - hw->rx_cnt >= 4 && fifo_fill) { + *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB); + hw->rx_cnt += 4; + hw->rx += 4; + fifo_fill--; + } + + /* + * If there are remaining bytes, read byte count from STAT.RXBV + * register and read the data byte-wise. + */ + while (fifo_fill && hw->rx_cnt < hw->len) { + rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >> + LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK; + data = ltq_spi_reg_read(hw, LTQ_SPI_RB); + + shift = (rxbv - 1) * 8; + rx8 = hw->rx; + + while (rxbv) { + *rx8++ = (data >> shift) & 0xFF; + rxbv--; + shift -= 8; + hw->rx_cnt++; + hw->rx++; + } + + fifo_fill--; + } +} + +static void ltq_spi_rxreq_set(struct ltq_spi *hw) +{ + u32 rxreq, rxreq_max, rxtodo; + + rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK; + + /* + * In RX-only mode the serial clock is activated only after writing + * the expected amount of RX bytes into RXREQ register. + * To avoid receive overflows at high clocks it is better to request + * only the amount of bytes that fits into all FIFOs. This value + * depends on the FIFO size implemented in hardware. + */ + rxreq = hw->len - hw->rx_cnt; + rxreq_max = hw->rxfs << 2; + rxreq = min(rxreq_max, rxreq); + + if (!rxtodo && rxreq) + ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ); +} + +static inline void ltq_spi_complete(struct ltq_spi *hw) +{ + complete(&hw->done); +} + +irqreturn_t ltq_spi_tx_irq(int irq, void *data) +{ + struct ltq_spi *hw = data; + unsigned long flags; + int completed = 0; + + spin_lock_irqsave(&hw->lock, flags); + + if (hw->tx_cnt < hw->len) + ltq_spi_txfifo_write(hw); + + if (hw->tx_cnt == hw->len) + completed = 1; + + spin_unlock_irqrestore(&hw->lock, flags); + + if (completed) + ltq_spi_complete(hw); + + return IRQ_HANDLED; +} + +irqreturn_t ltq_spi_rx_irq(int irq, void *data) +{ + struct ltq_spi *hw = data; + unsigned long flags; + int completed = 0; + + spin_lock_irqsave(&hw->lock, flags); + + if (hw->rx_cnt < hw->len) { + ltq_spi_rxfifo_read(hw); + + if (hw->tx && hw->tx_cnt < hw->len) + ltq_spi_txfifo_write(hw); + } + + if (hw->rx_cnt == hw->len) + completed = 1; + else if (!hw->tx) + ltq_spi_rxreq_set(hw); + + spin_unlock_irqrestore(&hw->lock, flags); + + if (completed) + ltq_spi_complete(hw); + + return IRQ_HANDLED; +} + +irqreturn_t ltq_spi_err_irq(int irq, void *data) +{ + struct ltq_spi *hw = data; + unsigned long flags; + + spin_lock_irqsave(&hw->lock, flags); + + /* Disable all interrupts */ + ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); + + /* Clear all error flags */ + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* Flush FIFOs */ + ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); + ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); + + hw->status = -EIO; + spin_unlock_irqrestore(&hw->lock, flags); + + ltq_spi_complete(hw); + + return IRQ_HANDLED; +} + +static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct ltq_spi *hw = ltq_spi_to_hw(spi); + u32 irq_flags = 0; + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->tx_cnt = 0; + hw->rx_cnt = 0; + hw->status = 0; + INIT_COMPLETION(hw->done); + + ltq_spi_xmit_set(hw, t); + + /* Enable error interrupts */ + ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); + + if (hw->tx) { + /* Initially fill TX FIFO with as much data as possible */ + ltq_spi_txfifo_write(hw); + irq_flags |= LTQ_SPI_IRNEN_T; + + /* Always enable RX interrupt in Full Duplex mode */ + if (hw->rx) + irq_flags |= LTQ_SPI_IRNEN_R; + } else if (hw->rx) { + /* Start RX clock */ + ltq_spi_rxreq_set(hw); + + /* Enable RX interrupt to receive data from RX FIFOs */ + irq_flags |= LTQ_SPI_IRNEN_R; + } + + /* Enable TX or RX interrupts */ + ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN); + wait_for_completion_interruptible(&hw->done); + + /* Disable all interrupts */ + ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); + + /* + * Return length of current transfer for bitbang utility code if + * no errors occured during transmission. + */ + if (!hw->status) + hw->status = hw->len; + + return hw->status; +} + +static const struct ltq_spi_irq_map ltq_spi_irqs[] = { + { "spi_tx", ltq_spi_tx_irq }, + { "spi_rx", ltq_spi_rx_irq }, + { "spi_err", ltq_spi_err_irq }, +}; + +static int __devinit +ltq_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct resource *r; + struct ltq_spi *hw; + struct ltq_spi_platform_data *pdata = pdev->dev.platform_data; + int ret, i; + u32 data, id; + + master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi)); + if (!master) { + dev_err(&pdev->dev, "spi_alloc_master\n"); + ret = -ENOMEM; + goto err; + } + + hw = spi_master_get_devdata(master); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "platform_get_resource\n"); + ret = -ENOENT; + goto err_master; + } + + r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r), + pdev->name); + if (!r) { + dev_err(&pdev->dev, "devm_request_mem_region\n"); + ret = -ENXIO; + goto err_master; + } + + hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); + if (!hw->base) { + dev_err(&pdev->dev, "devm_ioremap_nocache\n"); + ret = -ENXIO; + goto err_master; + } + + hw->fpiclk = clk_get_fpi(); + if (IS_ERR(hw->fpiclk)) { + dev_err(&pdev->dev, "fpi clk\n"); + ret = PTR_ERR(hw->fpiclk); + goto err_master; + } + + hw->spiclk = clk_get(&pdev->dev, NULL); + if (IS_ERR(hw->spiclk)) { + dev_err(&pdev->dev, "spi clk\n"); + ret = PTR_ERR(hw->spiclk); + goto err_master; + } + + memset(hw->irq, 0, sizeof(hw->irq)); + for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) { + ret = platform_get_irq_byname(pdev, ltq_spi_irqs[i].name); + if (0 > ret) { + dev_err(&pdev->dev, "platform_get_irq_byname\n"); + goto err_irq; + } + + hw->irq[i] = ret; + ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler, + 0, ltq_spi_irqs[i].name, hw); + if (ret) { + dev_err(&pdev->dev, "request_irq\n"); + goto err_irq; + } + } + + hw->bitbang.master = spi_master_get(master); + hw->bitbang.chipselect = ltq_spi_chipselect; + hw->bitbang.setup_transfer = ltq_spi_setup_transfer; + hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs; + + master->bus_num = pdev->id; + master->num_chipselect = pdata->num_chipselect; + master->setup = ltq_spi_setup; + master->cleanup = ltq_spi_cleanup; + + hw->dev = &pdev->dev; + init_completion(&hw->done); + spin_lock_init(&hw->lock); + + /* Set GPIO alternate functions to SPI */ + ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DI, 2, 0, "spi-di"); + ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DO, 2, 1, "spi-do"); + ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_CLK, 2, 1, "spi-clk"); + + ltq_spi_hw_enable(hw); + + /* Read module capabilities */ + id = ltq_spi_reg_read(hw, LTQ_SPI_ID); + hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; + hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; + hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0; + + ltq_spi_config_mode_set(hw); + + /* Enable error checking, disable TX/RX, set idle value high */ + data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | + LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | + LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE; + ltq_spi_reg_write(hw, data, LTQ_SPI_CON); + + /* Enable master mode and clear error flags */ + ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS | + LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* Reset GPIO/CS registers */ + ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON); + ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO); + + /* Enable and flush FIFOs */ + ltq_spi_reset_fifos(hw); + + ret = spi_bitbang_start(&hw->bitbang); + if (ret) { + dev_err(&pdev->dev, "spi_bitbang_start\n"); + goto err_bitbang; + } + + platform_set_drvdata(pdev, hw); + + pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n", + id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support); + + return 0; + +err_bitbang: + ltq_spi_hw_disable(hw); + +err_irq: + clk_put(hw->fpiclk); + + for (; i > 0; i--) + free_irq(hw->irq[i], hw); + +err_master: + spi_master_put(master); + +err: + return ret; +} + +static int __devexit +ltq_spi_remove(struct platform_device *pdev) +{ + struct ltq_spi *hw = platform_get_drvdata(pdev); + int ret, i; + + ret = spi_bitbang_stop(&hw->bitbang); + if (ret) + return ret; + + platform_set_drvdata(pdev, NULL); + + ltq_spi_config_mode_set(hw); + ltq_spi_hw_disable(hw); + + for (i = 0; i < ARRAY_SIZE(hw->irq); i++) + if (0 < hw->irq[i]) + free_irq(hw->irq[i], hw); + + gpio_free(LTQ_SPI_GPIO_DI); + gpio_free(LTQ_SPI_GPIO_DO); + gpio_free(LTQ_SPI_GPIO_CLK); + + clk_put(hw->fpiclk); + spi_master_put(hw->bitbang.master); + + return 0; +} + +static struct platform_driver ltq_spi_driver = { + .probe = ltq_spi_probe, + .remove = __devexit_p(ltq_spi_remove), + .driver = { + .name = "ltq_spi", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ltq_spi_driver); + +MODULE_DESCRIPTION("Lantiq SoC SPI controller driver"); +MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ltq-spi"); diff --git a/target/linux/lantiq/files-3.3/drivers/spi/spi_svip.c b/target/linux/lantiq/files-3.3/drivers/spi/spi_svip.c new file mode 100644 index 0000000000..ae25c20b3a --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/spi/spi_svip.c @@ -0,0 +1,955 @@ +/************************************************************************ + * + * Copyright (c) 2008 + * Infineon Technologies AG + * St. Martin Strasse 53; 81669 Muenchen; Germany + * + * Inspired by Atmel AT32/AT91 SPI Controller driver + * Copyright (c) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + ************************************************************************/ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +#include <asm/io.h> + +#include <status_reg.h> +#include <base_reg.h> +#include <ssc_reg.h> +#include <sys0_reg.h> +#include <sys1_reg.h> + +#define SFRAME_SIZE 512 /* bytes */ +#define FIFO_HEADROOM 2 /* words */ + +#define SVIP_SSC_RFIFO_WORDS 8 + +enum svip_ssc_dir { + SSC_RXTX, + SSC_RX, + SSC_TX, + SSC_UNDEF +}; + +/* + * The core SPI transfer engine just talks to a register bank to set up + * DMA transfers; transfer queue progress is driven by IRQs. The clock + * framework provides the base clock, subdivided for each spi_device. + */ +struct svip_ssc_device { + struct svip_reg_ssc *regs; + enum svip_ssc_dir bus_dir; + struct spi_device *stay; + + u8 stopping; + struct list_head queue; + struct spi_transfer *current_transfer; + int remaining_bytes; + int rx_bytes; + int tx_bytes; + + char intname[4][16]; + + spinlock_t lock; +}; + +static int svip_ssc_setup(struct spi_device *spi); + +extern unsigned int ltq_get_fbs0_hz(void); + +static void cs_activate(struct svip_ssc_device *ssc_dev, struct spi_device *spi) +{ + ssc_dev->regs->whbgpostat = 0x0001 << spi->chip_select; /* activate the chip select */ +} + +static void cs_deactivate(struct svip_ssc_device *ssc_dev, struct spi_device *spi) +{ + ssc_dev->regs->whbgpostat = 0x0100 << spi->chip_select; /* deactivate the chip select */ +} + +/* + * "Normally" returns Byte Valid = 4. + * If the unaligned remainder of the packet is 3 bytes, these have to be + * transferred as a combination of a 16-bit and a 8-bit FPI transfer. For + * 2 or 1 remaining bytes a single 16-bit or 8-bit transfer will do. + */ +static int inline _estimate_bv(int byte_pos, int bytelen) +{ + int remainder = bytelen % 4; + + if (byte_pos < (bytelen - remainder)) + return 4; + + if (remainder == 3) + { + if (byte_pos == (bytelen - remainder)) + return 2; + else + return 1; + } + return remainder; +} + +/* + * Submit next transfer. + * lock is held, spi irq is blocked + */ +static void svip_ssc_next_xfer(struct spi_master *master, + struct spi_message *msg) +{ + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_transfer *xfer; + unsigned char *buf_ptr; + + xfer = ssc_dev->current_transfer; + if (!xfer || ssc_dev->remaining_bytes == 0) { + if (xfer) + xfer = list_entry(xfer->transfer_list.next, + struct spi_transfer, transfer_list); + else + xfer = list_entry(msg->transfers.next, + struct spi_transfer, transfer_list); + ssc_dev->remaining_bytes = xfer->len; + ssc_dev->rx_bytes = 0; + ssc_dev->tx_bytes = 0; + ssc_dev->current_transfer = xfer; + ssc_dev->regs->sfcon = 0; /* reset Serial Framing */ + + /* enable and flush RX/TX FIFO */ + ssc_dev->regs->rxfcon = + SSC_RXFCON_RXFITL_VAL(SVIP_SSC_RFIFO_WORDS-FIFO_HEADROOM) | + SSC_RXFCON_RXFLU | /* Receive FIFO Flush */ + SSC_RXFCON_RXFEN; /* Receive FIFO Enable */ + + ssc_dev->regs->txfcon = + SSC_TXFCON_TXFITL_VAL(FIFO_HEADROOM) | + SSC_TXFCON_TXFLU | /* Transmit FIFO Flush */ + SSC_TXFCON_TXFEN; /* Transmit FIFO Enable */ + + asm("sync"); + + /* select mode RXTX, RX or TX */ + if (xfer->rx_buf && xfer->tx_buf) /* RX and TX */ + { + if (ssc_dev->bus_dir != SSC_RXTX) + { + ssc_dev->regs->mcon &= ~(SSC_MCON_RXOFF | SSC_MCON_TXOFF); + ssc_dev->bus_dir = SSC_RXTX; + ssc_dev->regs->irnen = SSC_IRNEN_T | SSC_IRNEN_F | SSC_IRNEN_E; + } + ssc_dev->regs->sfcon = + SSC_SFCON_PLEN_VAL(0) | + SSC_SFCON_DLEN_VAL(((xfer->len-1)%SFRAME_SIZE)*8+7) | + SSC_SFCON_STOP | + SSC_SFCON_ICLK_VAL(2) | + SSC_SFCON_IDAT_VAL(2) | + SSC_SFCON_IAEN | + SSC_SFCON_SFEN; + + } + else if (xfer->rx_buf) /* RX only */ + { + if (ssc_dev->bus_dir != SSC_RX) + { + ssc_dev->regs->mcon = + (ssc_dev->regs->mcon | SSC_MCON_TXOFF) & ~SSC_MCON_RXOFF; + + ssc_dev->bus_dir = SSC_RX; + + ssc_dev->regs->irnen = SSC_IRNEN_R | SSC_IRNEN_E; + } + /* Initiate clock generation for Rx-Only Transfer. In case of RX-only transfer, + * rx_bytes represents the number of already requested bytes. + */ + ssc_dev->rx_bytes = min(xfer->len, (unsigned)(SVIP_SSC_RFIFO_WORDS*4)); + ssc_dev->regs->rxreq = ssc_dev->rx_bytes; + } + else /* TX only */ + { + if (ssc_dev->bus_dir != SSC_TX) + { + ssc_dev->regs->mcon = + (ssc_dev->regs->mcon | SSC_MCON_RXOFF) & ~SSC_MCON_TXOFF; + + ssc_dev->bus_dir = SSC_TX; + + ssc_dev->regs->irnen = + SSC_IRNEN_T | SSC_IRNEN_F | SSC_IRNEN_E; + } + ssc_dev->regs->sfcon = + SSC_SFCON_PLEN_VAL(0) | + SSC_SFCON_DLEN_VAL(((xfer->len-1)%SFRAME_SIZE)*8+7) | + SSC_SFCON_STOP | + SSC_SFCON_ICLK_VAL(2) | + SSC_SFCON_IDAT_VAL(2) | + SSC_SFCON_IAEN | + SSC_SFCON_SFEN; + } + } + + if (xfer->tx_buf) + { + int outstanding; + int i; + int fstat = ssc_dev->regs->fstat; + int txffl = SSC_FSTAT_TXFFL_GET(fstat); + int rxffl = SSC_FSTAT_RXFFL_GET(fstat); + + outstanding = txffl; + + if (xfer->rx_buf) + { + outstanding += rxffl; + if (SSC_STATE_BSY_GET(ssc_dev->regs->state)) + outstanding++; + + while (rxffl) /* is 0 in TX-Only mode */ + { + unsigned int rb; + int rxbv = _estimate_bv(ssc_dev->rx_bytes, xfer->len); + rb = ssc_dev->regs->rb; + for (i=0; i<rxbv; i++) + { + ((unsigned char*)xfer->rx_buf)[ssc_dev->rx_bytes] = + (rb >> ((rxbv-i-1)*8)) & 0xFF; + + ssc_dev->rx_bytes++; + } + rxffl--; + outstanding--; + } + ssc_dev->remaining_bytes = xfer->len - ssc_dev->rx_bytes; + } + + /* for last Tx cycle set TxFifo threshold to 0 */ + if ((xfer->len - ssc_dev->tx_bytes) <= + (4*(SVIP_SSC_RFIFO_WORDS-1-outstanding))) + { + ssc_dev->regs->txfcon = SSC_TXFCON_TXFITL_VAL(0) | + SSC_TXFCON_TXFEN; + } + + while ((ssc_dev->tx_bytes < xfer->len) && + (outstanding < (SVIP_SSC_RFIFO_WORDS-1))) + { + unsigned int tb = 0; + int txbv = _estimate_bv(ssc_dev->tx_bytes, xfer->len); + + for (i=0; i<txbv; i++) + { + tb |= ((unsigned char*)xfer->tx_buf)[ssc_dev->tx_bytes] << + ((txbv-i-1)*8); + + ssc_dev->tx_bytes++; + } + switch(txbv) + { +#ifdef __BIG_ENDIAN + case 1: + *((unsigned char *)(&(ssc_dev->regs->tb))+3) = tb & 0xFF; + break; + case 2: + *((unsigned short *)(&(ssc_dev->regs->tb))+1) = tb & 0xFFFF; + break; +#else /* __LITTLE_ENDIAN */ + case 1: + *((unsigned char *)(&(ssc_dev->regs->tb))) = tb & 0xFF; + break; + case 2: + *((unsigned short *)(&(ssc_dev->regs->tb))) = tb & 0xFFFF; + break; +#endif + default: + ssc_dev->regs->tb = tb; + } + outstanding++; + } + } + else /* xfer->tx_buf == NULL -> RX only! */ + { + int j; + int rxffl = SSC_FSTAT_RXFFL_GET(ssc_dev->regs->fstat); + int rxbv = 0; + unsigned int rbuf; + + buf_ptr = (unsigned char*)xfer->rx_buf + + (xfer->len - ssc_dev->remaining_bytes); + + for (j = 0; j < rxffl; j++) + { + rxbv = SSC_STATE_RXBV_GET(ssc_dev->regs->state); + rbuf = ssc_dev->regs->rb; + + if (rxbv == 4) + { + *((unsigned int*)buf_ptr+j) = ntohl(rbuf); + } + else + { + int b; +#ifdef __BIG_ENDIAN + for (b = 0; b < rxbv; b++) + { + buf_ptr[4*j+b] = ((unsigned char*)(&rbuf))[4-rxbv+b]; + } +#else /* __LITTLE_ENDIAN */ + for (b = 0; b < rxbv; b++) + { + buf_ptr[4*j+b] = ((unsigned char*)(&rbuf))[rxbv-1-b]; + } +#endif + } + ssc_dev->remaining_bytes -= rxbv; + } + if ((ssc_dev->rx_bytes < xfer->len) && + !SSC_STATE_BSY_GET(ssc_dev->regs->state)) + { + int rxreq = min(xfer->len - ssc_dev->rx_bytes, + (unsigned)(SVIP_SSC_RFIFO_WORDS*4)); + + ssc_dev->rx_bytes += rxreq; + ssc_dev->regs->rxreq = rxreq; + } + + if (ssc_dev->remaining_bytes < 0) + { + printk("ssc_dev->remaining_bytes = %d! xfer->len = %d, " + "rxffl=%d, rxbv=%d\n", ssc_dev->remaining_bytes, xfer->len, + rxffl, rxbv); + + ssc_dev->remaining_bytes = 0; + } + } +} + +/* + * Submit next message. + * lock is held + */ +static void svip_ssc_next_message(struct spi_master *master) +{ + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_device *spi; + + BUG_ON(ssc_dev->current_transfer); + + msg = list_entry(ssc_dev->queue.next, struct spi_message, queue); + spi = msg->spi; + + dev_dbg(master->dev.parent, "start message %p on %p\n", msg, spi); + + /* select chip if it's not still active */ + if (ssc_dev->stay) { + if (ssc_dev->stay != spi) { + cs_deactivate(ssc_dev, ssc_dev->stay); + svip_ssc_setup(spi); + cs_activate(ssc_dev, spi); + } + ssc_dev->stay = NULL; + } + else { + svip_ssc_setup(spi); + cs_activate(ssc_dev, spi); + } + + svip_ssc_next_xfer(master, msg); +} + +/* + * Report message completion. + * lock is held + */ +static void +svip_ssc_msg_done(struct spi_master *master, struct svip_ssc_device *ssc_dev, + struct spi_message *msg, int status, int stay) +{ + if (!stay || status < 0) + cs_deactivate(ssc_dev, msg->spi); + else + ssc_dev->stay = msg->spi; + + list_del(&msg->queue); + msg->status = status; + + dev_dbg(master->dev.parent, + "xfer complete: %u bytes transferred\n", + msg->actual_length); + + spin_unlock(&ssc_dev->lock); + msg->complete(msg->context); + spin_lock(&ssc_dev->lock); + + ssc_dev->current_transfer = NULL; + + /* continue if needed */ + if (list_empty(&ssc_dev->queue) || ssc_dev->stopping) + ; /* TODO: disable hardware */ + else + svip_ssc_next_message(master); +} + +static irqreturn_t svip_ssc_eir_handler(int irq, void *dev_id) +{ + struct platform_device *pdev = (struct platform_device*)dev_id; + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + + dev_err (&pdev->dev, "ERROR: errirq. STATE = 0x%0lx\n", + ssc_dev->regs->state); + return IRQ_HANDLED; +} + +static irqreturn_t svip_ssc_rir_handler(int irq, void *dev_id) +{ + struct platform_device *pdev = (struct platform_device*)dev_id; + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_transfer *xfer; + + xfer = ssc_dev->current_transfer; + msg = list_entry(ssc_dev->queue.next, struct spi_message, queue); + + /* Tx and Rx Interrupts are fairly unpredictable. Just leave interrupt + * handler for spurious Interrupts! + */ + if (!xfer) { + dev_dbg(master->dev.parent, + "%s(%d): xfer = NULL\n", __FUNCTION__, irq); + goto out; + } + if ( !(xfer->rx_buf) ) { + dev_dbg(master->dev.parent, + "%s(%d): xfer->rx_buf = NULL\n", __FUNCTION__, irq); + goto out; + } + if (ssc_dev->remaining_bytes > 0) + { + /* + * Keep going, we still have data to send in + * the current transfer. + */ + svip_ssc_next_xfer(master, msg); + } + + if (ssc_dev->remaining_bytes == 0) + { + msg->actual_length += xfer->len; + + if (msg->transfers.prev == &xfer->transfer_list) { + /* report completed message */ + svip_ssc_msg_done(master, ssc_dev, msg, 0, + xfer->cs_change); + } + else { + if (xfer->cs_change) { + cs_deactivate(ssc_dev, msg->spi); + udelay(1); /* not nice in interrupt context */ + cs_activate(ssc_dev, msg->spi); + } + + /* Not done yet. Submit the next transfer. */ + svip_ssc_next_xfer(master, msg); + } + } +out: + return IRQ_HANDLED; +} + +static irqreturn_t svip_ssc_tir_handler(int irq, void *dev_id) +{ + struct platform_device *pdev = (struct platform_device*)dev_id; + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_transfer *xfer; + int tx_remain; + + xfer = ssc_dev->current_transfer; + msg = list_entry(ssc_dev->queue.next, struct spi_message, queue); + + /* Tx and Rx Interrupts are fairly unpredictable. Just leave interrupt + * handler for spurious Interrupts! + */ + if (!xfer) { + dev_dbg(master->dev.parent, + "%s(%d): xfer = NULL\n", __FUNCTION__, irq); + goto out; + } + if ( !(xfer->tx_buf) ) { + dev_dbg(master->dev.parent, + "%s(%d): xfer->tx_buf = NULL\n", __FUNCTION__, irq); + goto out; + } + + if (ssc_dev->remaining_bytes > 0) + { + tx_remain = xfer->len - ssc_dev->tx_bytes; + if ( tx_remain == 0 ) + { + dev_dbg(master->dev.parent, + "%s(%d): tx_remain = 0\n", __FUNCTION__, irq); + } + else + /* + * Keep going, we still have data to send in + * the current transfer. + */ + svip_ssc_next_xfer(master, msg); + } +out: + return IRQ_HANDLED; +} + +static irqreturn_t svip_ssc_fir_handler(int irq, void *dev_id) +{ + struct platform_device *pdev = (struct platform_device*)dev_id; + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_message *msg; + struct spi_transfer *xfer; + + xfer = ssc_dev->current_transfer; + msg = list_entry(ssc_dev->queue.next, struct spi_message, queue); + + /* Tx and Rx Interrupts are fairly unpredictable. Just leave interrupt + * handler for spurious Interrupts! + */ + if (!xfer) { + dev_dbg(master->dev.parent, + "%s(%d): xfer = NULL\n", __FUNCTION__, irq); + goto out; + } + if ( !(xfer->tx_buf) ) { + dev_dbg(master->dev.parent, + "%s(%d): xfer->tx_buf = NULL\n", __FUNCTION__, irq); + goto out; + } + + if (ssc_dev->remaining_bytes > 0) + { + int tx_remain = xfer->len - ssc_dev->tx_bytes; + + if (tx_remain == 0) + { + /* Frame interrupt gets raised _before_ last Rx interrupt */ + if (xfer->rx_buf) + { + svip_ssc_next_xfer(master, msg); + if (ssc_dev->remaining_bytes) + printk("expected RXTX transfer to be complete!\n"); + } + ssc_dev->remaining_bytes = 0; + } + else + { + ssc_dev->regs->sfcon = SSC_SFCON_PLEN_VAL(0) | + SSC_SFCON_DLEN_VAL(SFRAME_SIZE*8-1) | + SSC_SFCON_STOP | + SSC_SFCON_ICLK_VAL(2) | + SSC_SFCON_IDAT_VAL(2) | + SSC_SFCON_IAEN | + SSC_SFCON_SFEN; + } + } + + if (ssc_dev->remaining_bytes == 0) + { + msg->actual_length += xfer->len; + + if (msg->transfers.prev == &xfer->transfer_list) { + /* report completed message */ + svip_ssc_msg_done(master, ssc_dev, msg, 0, + xfer->cs_change); + } + else { + if (xfer->cs_change) { + cs_deactivate(ssc_dev, msg->spi); + udelay(1); /* not nice in interrupt context */ + cs_activate(ssc_dev, msg->spi); + } + + /* Not done yet. Submit the next transfer. */ + svip_ssc_next_xfer(master, msg); + } + } + +out: + return IRQ_HANDLED; +} + +/* the spi->mode bits understood by this driver: */ +#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP) + +static int svip_ssc_setup(struct spi_device *spi) +{ + struct spi_master *master = spi->master; + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + unsigned int bits = spi->bits_per_word; + unsigned int br, sck_hz = spi->max_speed_hz; + unsigned long flags; + + if (ssc_dev->stopping) + return -ESHUTDOWN; + + if (spi->chip_select >= master->num_chipselect) { + dev_dbg(&spi->dev, + "setup: invalid chipselect %u (%u defined)\n", + spi->chip_select, master->num_chipselect); + return -EINVAL; + } + + if (bits == 0) + bits = 8; + if (bits != 8) { + dev_dbg(&spi->dev, + "setup: invalid bits_per_word %u (expect 8)\n", + bits); + return -EINVAL; + } + + if (spi->mode & ~MODEBITS) { + dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n", + spi->mode & ~MODEBITS); + return -EINVAL; + } + + /* Disable SSC */ + ssc_dev->regs->whbstate = SSC_WHBSTATE_CLREN; + + if (sck_hz == 0) + sck_hz = 10000; + + br = ltq_get_fbs0_hz()/(2 *sck_hz); + if (ltq_get_fbs0_hz()%(2 *sck_hz) == 0) + br = br -1; + ssc_dev->regs->br = br; + + /* set Control Register */ + ssc_dev->regs->mcon = SSC_MCON_ENBV | + SSC_MCON_RUEN | + SSC_MCON_TUEN | + SSC_MCON_AEN | + SSC_MCON_REN | + SSC_MCON_TEN | + (spi->mode & SPI_CPOL ? SSC_MCON_PO : 0) | /* Clock Polarity */ + (spi->mode & SPI_CPHA ? 0 : SSC_MCON_PH) | /* Tx on trailing edge */ + (spi->mode & SPI_LOOP ? SSC_MCON_LB : 0) | /* Loopback */ + (spi->mode & SPI_LSB_FIRST ? 0 : SSC_MCON_HB); /* MSB first */ + ssc_dev->bus_dir = SSC_UNDEF; + + /* Enable SSC */ + ssc_dev->regs->whbstate = SSC_WHBSTATE_SETEN; + asm("sync"); + + spin_lock_irqsave(&ssc_dev->lock, flags); + if (ssc_dev->stay == spi) + ssc_dev->stay = NULL; + cs_deactivate(ssc_dev, spi); + spin_unlock_irqrestore(&ssc_dev->lock, flags); + + dev_dbg(&spi->dev, + "setup: %u Hz bpw %u mode 0x%02x cs %u\n", + sck_hz, bits, spi->mode, spi->chip_select); + + return 0; +} + +static int svip_ssc_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct spi_master *master = spi->master; + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_transfer *xfer; + unsigned long flags; + + dev_dbg(&spi->dev, "new message %p submitted\n", msg); + + if (unlikely(list_empty(&msg->transfers) + || !spi->max_speed_hz)) { + return -EINVAL; + } + + if (ssc_dev->stopping) + return -ESHUTDOWN; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (!(xfer->tx_buf || xfer->rx_buf) || (xfer->len == 0)) { + dev_dbg(&spi->dev, "missing rx or tx buf\n"); + return -EINVAL; + } + + /* FIXME implement these protocol options!! */ + if (xfer->bits_per_word || xfer->speed_hz) { + dev_dbg(&spi->dev, "no protocol options yet\n"); + return -ENOPROTOOPT; + } + +#ifdef VERBOSE + dev_dbg(spi->dev, + " xfer %p: len %u tx %p/%08x rx %p/%08x\n", + xfer, xfer->len, + xfer->tx_buf, xfer->tx_dma, + xfer->rx_buf, xfer->rx_dma); +#endif + } + + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + spin_lock_irqsave(&ssc_dev->lock, flags); + list_add_tail(&msg->queue, &ssc_dev->queue); + if (!ssc_dev->current_transfer) + { + /* start transmission machine, if not started yet */ + svip_ssc_next_message(master); + } + spin_unlock_irqrestore(&ssc_dev->lock, flags); + + return 0; +} + +static void svip_ssc_cleanup(struct spi_device *spi) +{ + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(spi->master); + unsigned long flags; + + if (!spi->controller_state) + return; + + spin_lock_irqsave(&ssc_dev->lock, flags); + if (ssc_dev->stay == spi) { + ssc_dev->stay = NULL; + cs_deactivate(ssc_dev, spi); + } + spin_unlock_irqrestore(&ssc_dev->lock, flags); +} + +/*-------------------------------------------------------------------------*/ + +static int __init svip_ssc_probe(struct platform_device *pdev) +{ + int ret; + struct spi_master *master; + struct svip_ssc_device *ssc_dev; + struct resource *res_regs; + int irq; + + ret = -ENOMEM; + + /* setup spi core then atmel-specific driver state */ + master = spi_alloc_master(&pdev->dev, sizeof (*ssc_dev)); + if (!master) + { + dev_err (&pdev->dev, "ERROR: no memory for master spi\n"); + goto errout; + } + + ssc_dev = spi_master_get_devdata(master); + platform_set_drvdata(pdev, master); + + master->bus_num = pdev->id; + master->num_chipselect = 8; + master->mode_bits = MODEBITS; + master->setup = svip_ssc_setup; + master->transfer = svip_ssc_transfer; + master->cleanup = svip_ssc_cleanup; + + spin_lock_init(&ssc_dev->lock); + INIT_LIST_HEAD(&ssc_dev->queue); + + /* retrive register configration */ + res_regs = platform_get_resource_byname (pdev, IORESOURCE_MEM, "regs"); + if (NULL == res_regs) + { + dev_err (&pdev->dev, "ERROR: missed 'regs' resource\n"); + goto spierr; + } + + ssc_dev->regs = (struct svip_reg_ssc*)KSEG1ADDR(res_regs->start); + + irq = platform_get_irq_byname (pdev, "tx"); + if (irq < 0) + goto irqerr; + sprintf(ssc_dev->intname[0], "%s_tx", pdev->name); + ret = devm_request_irq(&pdev->dev, irq, svip_ssc_tir_handler, + IRQF_DISABLED, ssc_dev->intname[0], pdev); + if (ret != 0) + goto irqerr; + + irq = platform_get_irq_byname (pdev, "rx"); + if (irq < 0) + goto irqerr; + sprintf(ssc_dev->intname[1], "%s_rx", pdev->name); + ret = devm_request_irq(&pdev->dev, irq, svip_ssc_rir_handler, + IRQF_DISABLED, ssc_dev->intname[1], pdev); + if (ret != 0) + goto irqerr; + + irq = platform_get_irq_byname (pdev, "err"); + if (irq < 0) + goto irqerr; + sprintf(ssc_dev->intname[2], "%s_err", pdev->name); + ret = devm_request_irq(&pdev->dev, irq, svip_ssc_eir_handler, + IRQF_DISABLED, ssc_dev->intname[2], pdev); + if (ret != 0) + goto irqerr; + + irq = platform_get_irq_byname (pdev, "frm"); + if (irq < 0) + goto irqerr; + sprintf(ssc_dev->intname[3], "%s_frm", pdev->name); + ret = devm_request_irq(&pdev->dev, irq, svip_ssc_fir_handler, + IRQF_DISABLED, ssc_dev->intname[3], pdev); + if (ret != 0) + goto irqerr; + + /* + * Initialize the Hardware + */ + + /* Clear enable bit, i.e. put SSC into configuration mode */ + ssc_dev->regs->whbstate = SSC_WHBSTATE_CLREN; + /* enable SSC core to run at fpi clock */ + ssc_dev->regs->clc = SSC_CLC_RMC_VAL(1); + asm("sync"); + + /* GPIO CS */ + ssc_dev->regs->gpocon = SSC_GPOCON_ISCSBN_VAL(0xFF); + ssc_dev->regs->whbgpostat = SSC_WHBGPOSTAT_SETOUTN_VAL(0xFF); /* CS to high */ + + /* Set Master mode */ + ssc_dev->regs->whbstate = SSC_WHBSTATE_SETMS; + + /* enable and flush RX/TX FIFO */ + ssc_dev->regs->rxfcon = SSC_RXFCON_RXFITL_VAL(SVIP_SSC_RFIFO_WORDS-FIFO_HEADROOM) | + SSC_RXFCON_RXFLU | /* Receive FIFO Flush */ + SSC_RXFCON_RXFEN; /* Receive FIFO Enable */ + + ssc_dev->regs->txfcon = SSC_TXFCON_TXFITL_VAL(FIFO_HEADROOM) | + SSC_TXFCON_TXFLU | /* Transmit FIFO Flush */ + SSC_TXFCON_TXFEN; /* Transmit FIFO Enable */ + asm("sync"); + + /* enable IRQ */ + ssc_dev->regs->irnen = SSC_IRNEN_E; + + dev_info(&pdev->dev, "controller at 0x%08lx (irq %d)\n", + (unsigned long)ssc_dev->regs, platform_get_irq_byname (pdev, "rx")); + + ret = spi_register_master(master); + if (ret) + goto out_reset_hw; + + return 0; + +out_reset_hw: + +irqerr: + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "tx"), pdev); + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "rx"), pdev); + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "err"), pdev); + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "frm"), pdev); + +spierr: + + spi_master_put(master); + +errout: + return ret; +} + +static int __exit svip_ssc_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + struct spi_message *msg; + + /* reset the hardware and block queue progress */ + spin_lock_irq(&ssc_dev->lock); + ssc_dev->stopping = 1; + /* TODO: shutdown hardware */ + spin_unlock_irq(&ssc_dev->lock); + + /* Terminate remaining queued transfers */ + list_for_each_entry(msg, &ssc_dev->queue, queue) { + /* REVISIT unmapping the dma is a NOP on ARM and AVR32 + * but we shouldn't depend on that... + */ + msg->status = -ESHUTDOWN; + msg->complete(msg->context); + } + + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "tx"), pdev); + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "rx"), pdev); + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "err"), pdev); + devm_free_irq (&pdev->dev, platform_get_irq_byname (pdev, "frm"), pdev); + + spi_unregister_master(master); + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + return 0; +} + +#ifdef CONFIG_PM +static int svip_ssc_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + + clk_disable(ssc_dev->clk); + return 0; +} + +static int svip_ssc_resume(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct svip_ssc_device *ssc_dev = spi_master_get_devdata(master); + + clk_enable(ssc_dev->clk); + return 0; +} +#endif + +static struct platform_driver svip_ssc_driver = { + .driver = { + .name = "ifx_ssc", + .owner = THIS_MODULE, + }, + .probe = svip_ssc_probe, +#ifdef CONFIG_PM + .suspend = svip_ssc_suspend, + .resume = svip_ssc_resume, +#endif + .remove = __exit_p(svip_ssc_remove) +}; + +int __init svip_ssc_init(void) +{ + return platform_driver_register(&svip_ssc_driver); +} + +void __exit svip_ssc_exit(void) +{ + platform_driver_unregister(&svip_ssc_driver); +} + +module_init(svip_ssc_init); +module_exit(svip_ssc_exit); + +MODULE_ALIAS("platform:ifx_ssc"); +MODULE_DESCRIPTION("Lantiq SSC Controller driver"); +MODULE_AUTHOR("Andreas Schmidt <andreas.schmidt@infineon.com>"); +MODULE_AUTHOR("Jevgenijs Grigorjevs <Jevgenijs.Grigorjevs@lantiq.com>"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/Kconfig b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/Kconfig new file mode 100644 index 0000000000..e018490fa3 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/Kconfig @@ -0,0 +1,37 @@ +config DWC_OTG + tristate "Synopsis DWC_OTG support" + depends on USB + help + This driver supports Synopsis DWC_OTG IP core + embebbed on many SOCs (ralink, infineon, etc) + +choice + prompt "USB Operation Mode" + depends on DWC_OTG + default DWC_OTG_HOST_ONLY + +config DWC_OTG_HOST_ONLY + bool "HOST ONLY MODE" + depends on DWC_OTG + +#config DWC_OTG_DEVICE_ONLY +# bool "DEVICE ONLY MODE" +# depends on DWC_OTG +endchoice + +choice + prompt "Platform" + depends on DWC_OTG + default DWC_OTG_LANTIQ + +config DWC_OTG_LANTIQ + bool "Lantiq" + depends on LANTIQ + help + Danube USB Host Controller + platform support +endchoice + +config DWC_OTG_DEBUG + bool "Enable debug mode" + depends on DWC_OTG diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/Makefile b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/Makefile new file mode 100644 index 0000000000..d4d23554a1 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/Makefile @@ -0,0 +1,39 @@ +# +# Makefile for DWC_otg Highspeed USB controller driver +# + +ifeq ($(CONFIG_DWC_OTG_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + +# Use one of the following flags to compile the software in host-only or +# device-only mode based on the configuration selected by the user +ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y) + EXTRA_CFLAGS += -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY + EXTRA_CFLAGS += -DDWC_OTG_EN_ISOC -DDWC_EN_ISOC +else ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y) + EXTRA_CFLAGS += -DDWC_OTG_DEVICE_ONLY +else + EXTRA_CFLAGS += -DDWC_OTG_MODE +endif + +# EXTRA_CFLAGS += -DDWC_HS_ELECT_TST +# EXTRA_CFLAGS += -DDWC_OTG_EXT_CHG_PUMP + +ifeq ($(CONFIG_DWC_OTG_LANTIQ),y) + EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY -D__KERNEL__ +endif +ifeq ($(CONFIG_DWC_OTG_LANTIQ),m) + EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_HOST_ONLY -DMODULE -D__KERNEL__ -DDEBUG +endif + +obj-$(CONFIG_DWC_OTG) := dwc_otg.o +dwc_otg-objs := dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o +#dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o +dwc_otg-objs += dwc_otg_attr.o +dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o +dwc_otg-objs += dwc_otg_ifx.o +dwc_otg-objs += dwc_otg_driver.o + +#obj-$(CONFIG_DWC_OTG_IFX) := dwc_otg_ifx.o +#dwc_otg_ifx-objs := dwc_otg_ifx.o diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_attr.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_attr.c new file mode 100644 index 0000000000..4675a5cc7d --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_attr.c @@ -0,0 +1,802 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 537387 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The diagnostic interface will provide access to the controller for + * bringing up the hardware and testing. The Linux driver attributes + * feature will be used to provide the Linux Diagnostic + * Interface. These attributes are accessed through sysfs. + */ + +/** @page "Linux Module Attributes" + * + * The Linux module attributes feature is used to provide the Linux + * Diagnostic Interface. These attributes are accessed through sysfs. + * The diagnostic interface will provide access to the controller for + * bringing up the hardware and testing. + + + The following table shows the attributes. + <table> + <tr> + <td><b> Name</b></td> + <td><b> Description</b></td> + <td><b> Access</b></td> + </tr> + + <tr> + <td> mode </td> + <td> Returns the current mode: 0 for device mode, 1 for host mode</td> + <td> Read</td> + </tr> + + <tr> + <td> hnpcapable </td> + <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. + Read returns the current value.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> srpcapable </td> + <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. + Read returns the current value.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> hnp </td> + <td> Initiates the Host Negotiation Protocol. Read returns the status.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> srp </td> + <td> Initiates the Session Request Protocol. Read returns the status.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> buspower </td> + <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> bussuspend </td> + <td> Suspends the USB bus.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> busconnected </td> + <td> Gets the connection status of the bus</td> + <td> Read</td> + </tr> + + <tr> + <td> gotgctl </td> + <td> Gets or sets the Core Control Status Register.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gusbcfg </td> + <td> Gets or sets the Core USB Configuration Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> grxfsiz </td> + <td> Gets or sets the Receive FIFO Size Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gnptxfsiz </td> + <td> Gets or sets the non-periodic Transmit Size Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gpvndctl </td> + <td> Gets or sets the PHY Vendor Control Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> ggpio </td> + <td> Gets the value in the lower 16-bits of the General Purpose IO Register + or sets the upper 16 bits.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> guid </td> + <td> Gets or sets the value of the User ID Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gsnpsid </td> + <td> Gets the value of the Synopsys ID Regester</td> + <td> Read</td> + </tr> + + <tr> + <td> devspeed </td> + <td> Gets or sets the device speed setting in the DCFG register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> enumspeed </td> + <td> Gets the device enumeration Speed.</td> + <td> Read</td> + </tr> + + <tr> + <td> hptxfsiz </td> + <td> Gets the value of the Host Periodic Transmit FIFO</td> + <td> Read</td> + </tr> + + <tr> + <td> hprt0 </td> + <td> Gets or sets the value in the Host Port Control and Status Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> regoffset </td> + <td> Sets the register offset for the next Register Access</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> regvalue </td> + <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> remote_wakeup </td> + <td> On read, shows the status of Remote Wakeup. On write, initiates a remote + wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote + Wakeup signalling bit in the Device Control Register is set for 1 + milli-second.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> regdump </td> + <td> Dumps the contents of core registers.</td> + <td> Read</td> + </tr> + + <tr> + <td> hcddump </td> + <td> Dumps the current HCD state.</td> + <td> Read</td> + </tr> + + <tr> + <td> hcd_frrem </td> + <td> Shows the average value of the Frame Remaining + field in the Host Frame Number/Frame Remaining register when an SOF interrupt + occurs. This can be used to determine the average interrupt latency. Also + shows the average Frame Remaining value for start_transfer and the "a" and + "b" sample points. The "a" and "b" sample points may be used during debugging + bto determine how long it takes to execute a section of the HCD code.</td> + <td> Read</td> + </tr> + + <tr> + <td> rd_reg_test </td> + <td> Displays the time required to read the GNPTXFSIZ register many times + (the output shows the number of times the register is read). + <td> Read</td> + </tr> + + <tr> + <td> wr_reg_test </td> + <td> Displays the time required to write the GNPTXFSIZ register many times + (the output shows the number of times the register is written). + <td> Read</td> + </tr> + + </table> + + Example usage: + To get the current mode: + cat /sys/devices/lm0/mode + + To power down the USB: + echo 0 > /sys/devices/lm0/buspower + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/stat.h> /* permission constants */ + +#include <asm/io.h> + +#include "dwc_otg_plat.h" +#include "dwc_otg_attr.h" +#include "dwc_otg_driver.h" +// #include "dwc_otg_pcd.h" +#include "dwc_otg_hcd.h" + +// 20070316, winder added. +#ifndef SZ_256K +#define SZ_256K 0x00040000 +#endif + +/* + * MACROs for defining sysfs attribute + */ +#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t val; \ + val = dwc_read_reg32 (_addr_); \ + val = (val & (_mask_)) >> _shift_; \ + return sprintf (buf, "%s = 0x%x\n", _string_, val); \ +} +#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t set = simple_strtoul(buf, NULL, 16); \ + uint32_t clear = set; \ + clear = ((~clear) << _shift_) & _mask_; \ + set = (set << _shift_) & _mask_; \ + dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \ + dwc_modify_reg32(_addr_, clear, set); \ + return count; \ +} + +#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); + +#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); + +/* + * MACROs for defining sysfs attribute for 32-bit registers + */ +#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t val; \ + val = dwc_read_reg32 (_addr_); \ + return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ +} +#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ +static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t val = simple_strtoul(buf, NULL, 16); \ + dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \ + dwc_write_reg32(_addr_, val); \ + return count; \ +} + +#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ +DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); + +#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ +DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); + + +/** @name Functions for Show/Store of Attributes */ +/**@{*/ + +/** + * Show the register offset of the Register Access. + */ +static ssize_t regoffset_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset); +} + +/** + * Set the register offset for the next Register Access Read/Write + */ +static ssize_t regoffset_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + uint32_t offset = simple_strtoul(buf, NULL, 16); + //dev_dbg(_dev, "Offset=0x%08x\n", offset); + if (offset < SZ_256K ) { + otg_dev->reg_offset = offset; + } + else { + dev_err( _dev, "invalid offset\n" ); + } + + return count; +} +DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, regoffset_show, regoffset_store); + +/** + * Show the value of the register at the offset in the reg_offset + * attribute. + */ +static ssize_t regvalue_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + uint32_t val; + volatile uint32_t *addr; + + if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) { + /* Calculate the address */ + addr = (uint32_t*)(otg_dev->reg_offset + + (uint8_t*)otg_dev->base); + //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); + val = dwc_read_reg32( addr ); + return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1, + "Reg@0x%06x = 0x%08x\n", + otg_dev->reg_offset, val); + } + else { + dev_err(_dev, "Invalid offset (0x%0x)\n", + otg_dev->reg_offset); + return sprintf(buf, "invalid offset\n" ); + } +} + +/** + * Store the value in the register at the offset in the reg_offset + * attribute. + * + */ +static ssize_t regvalue_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + volatile uint32_t * addr; + uint32_t val = simple_strtoul(buf, NULL, 16); + //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); + if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) { + /* Calculate the address */ + addr = (uint32_t*)(otg_dev->reg_offset + + (uint8_t*)otg_dev->base); + //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); + dwc_write_reg32( addr, val ); + } + else { + dev_err(_dev, "Invalid Register Offset (0x%08x)\n", + otg_dev->reg_offset); + } + return count; +} +DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store); + +/* + * Attributes + */ +DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode"); + +//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); +//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected"); + +DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL"); +DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG"); +DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ"); +DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ"); +DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL"); +DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO"); +DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID"); +DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed"); + +DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ"); +DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0"); + + +/** + * @todo Add code to initiate the HNP. + */ +/** + * Show the HNP status bit + */ +static ssize_t hnp_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + gotgctl_data_t val; + val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl)); + return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs); +} + +/** + * Set the HNP Request bit + */ +static ssize_t hnp_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + uint32_t in = simple_strtoul(buf, NULL, 16); + uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl); + gotgctl_data_t mem; + mem.d32 = dwc_read_reg32(addr); + mem.b.hnpreq = in; + dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); + dwc_write_reg32(addr, mem.d32); + return count; +} +DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); + +/** + * @todo Add code to initiate the SRP. + */ +/** + * Show the SRP status bit + */ +static ssize_t srp_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + gotgctl_data_t val; + val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl)); + return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs); +#else + return sprintf(buf, "Host Only Mode!\n"); +#endif +} + +/** + * Set the SRP Request bit + */ +static ssize_t srp_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + dwc_otg_pcd_initiate_srp(otg_dev->pcd); +#endif + return count; +} +DEVICE_ATTR(srp, 0644, srp_show, srp_store); + +/** + * @todo Need to do more for power on/off? + */ +/** + * Show the Bus Power status + */ +static ssize_t buspower_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + hprt0_data_t val; + val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0); + return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr); +} + + +/** + * Set the Bus Power status + */ +static ssize_t buspower_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + uint32_t on = simple_strtoul(buf, NULL, 16); + uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0; + hprt0_data_t mem; + + mem.d32 = dwc_read_reg32(addr); + mem.b.prtpwr = on; + + //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); + dwc_write_reg32(addr, mem.d32); + + return count; +} +DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); + +/** + * @todo Need to do more for suspend? + */ +/** + * Show the Bus Suspend status + */ +static ssize_t bussuspend_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + hprt0_data_t val; + val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0); + return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp); +} + +/** + * Set the Bus Suspend status + */ +static ssize_t bussuspend_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + uint32_t in = simple_strtoul(buf, NULL, 16); + uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0; + hprt0_data_t mem; + mem.d32 = dwc_read_reg32(addr); + mem.b.prtsusp = in; + dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); + dwc_write_reg32(addr, mem.d32); + return count; +} +DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); + +/** + * Show the status of Remote Wakeup. + */ +static ssize_t remote_wakeup_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + dctl_data_t val; + val.d32 = dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl); + return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n", + val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable); +#else + return sprintf(buf, "Host Only Mode!\n"); +#endif +} + +/** + * Initiate a remote wakeup of the host. The Device control register + * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable + * flag is set. + * + */ +static ssize_t remote_wakeup_store( struct device *_dev, struct device_attribute *attr, const char *buf, + size_t count ) +{ +#ifndef DWC_HOST_ONLY + uint32_t val = simple_strtoul(buf, NULL, 16); + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + if (val&1) { + dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); + } + else { + dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); + } +#endif + return count; +} +DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show, + remote_wakeup_store); + +/** + * Dump global registers and either host or device registers (depending on the + * current mode of the core). + */ +static ssize_t regdump_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ +#ifdef DEBUG + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + printk("%s otg_dev=0x%p\n", __FUNCTION__, otg_dev); + + dwc_otg_dump_global_registers( otg_dev->core_if); + if (dwc_otg_is_host_mode(otg_dev->core_if)) { + dwc_otg_dump_host_registers( otg_dev->core_if); + } else { + dwc_otg_dump_dev_registers( otg_dev->core_if); + } +#endif + + return sprintf( buf, "Register Dump\n" ); +} + +DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0); + +/** + * Dump the current hcd state. + */ +static ssize_t hcddump_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ +#ifndef DWC_DEVICE_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + dwc_otg_hcd_dump_state(otg_dev->hcd); +#endif + return sprintf( buf, "HCD Dump\n" ); +} + +DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0); + +/** + * Dump the average frame remaining at SOF. This can be used to + * determine average interrupt latency. Frame remaining is also shown for + * start transfer and two additional sample points. + */ +static ssize_t hcd_frrem_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ +#ifndef DWC_DEVICE_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + dwc_otg_hcd_dump_frrem(otg_dev->hcd); +#endif + return sprintf( buf, "HCD Dump Frame Remaining\n" ); +} + +DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0); + +/** + * Displays the time required to read the GNPTXFSIZ register many times (the + * output shows the number of times the register is read). + */ +#define RW_REG_COUNT 10000000 +#define MSEC_PER_JIFFIE 1000/HZ +static ssize_t rd_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + int i; + int time; + int start_jiffies; + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", + HZ, MSEC_PER_JIFFIE, loops_per_jiffy); + start_jiffies = jiffies; + for (i = 0; i < RW_REG_COUNT; i++) { + dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz); + } + time = jiffies - start_jiffies; + return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", + RW_REG_COUNT, time * MSEC_PER_JIFFIE, time ); +} + +DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0); + +/** + * Displays the time required to write the GNPTXFSIZ register many times (the + * output shows the number of times the register is written). + */ +static ssize_t wr_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf) +{ + int i; + int time; + int start_jiffies; + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + uint32_t reg_val; + + printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", + HZ, MSEC_PER_JIFFIE, loops_per_jiffy); + reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz); + start_jiffies = jiffies; + for (i = 0; i < RW_REG_COUNT; i++) { + dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val); + } + time = jiffies - start_jiffies; + return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", + RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); +} + +DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0); +/**@}*/ + +/** + * Create the device files + */ +void dwc_otg_attr_create (struct device *_dev) +{ + int retval; + + retval = device_create_file(_dev, &dev_attr_regoffset); + retval += device_create_file(_dev, &dev_attr_regvalue); + retval += device_create_file(_dev, &dev_attr_mode); + retval += device_create_file(_dev, &dev_attr_hnpcapable); + retval += device_create_file(_dev, &dev_attr_srpcapable); + retval += device_create_file(_dev, &dev_attr_hnp); + retval += device_create_file(_dev, &dev_attr_srp); + retval += device_create_file(_dev, &dev_attr_buspower); + retval += device_create_file(_dev, &dev_attr_bussuspend); + retval += device_create_file(_dev, &dev_attr_busconnected); + retval += device_create_file(_dev, &dev_attr_gotgctl); + retval += device_create_file(_dev, &dev_attr_gusbcfg); + retval += device_create_file(_dev, &dev_attr_grxfsiz); + retval += device_create_file(_dev, &dev_attr_gnptxfsiz); + retval += device_create_file(_dev, &dev_attr_gpvndctl); + retval += device_create_file(_dev, &dev_attr_ggpio); + retval += device_create_file(_dev, &dev_attr_guid); + retval += device_create_file(_dev, &dev_attr_gsnpsid); + retval += device_create_file(_dev, &dev_attr_devspeed); + retval += device_create_file(_dev, &dev_attr_enumspeed); + retval += device_create_file(_dev, &dev_attr_hptxfsiz); + retval += device_create_file(_dev, &dev_attr_hprt0); + retval += device_create_file(_dev, &dev_attr_remote_wakeup); + retval += device_create_file(_dev, &dev_attr_regdump); + retval += device_create_file(_dev, &dev_attr_hcddump); + retval += device_create_file(_dev, &dev_attr_hcd_frrem); + retval += device_create_file(_dev, &dev_attr_rd_reg_test); + retval += device_create_file(_dev, &dev_attr_wr_reg_test); + + if(retval != 0) + { + DWC_PRINT("cannot create sysfs device files.\n"); + // DWC_PRINT("killing own sysfs device files!\n"); + dwc_otg_attr_remove(_dev); + } +} + +/** + * Remove the device files + */ +void dwc_otg_attr_remove (struct device *_dev) +{ + device_remove_file(_dev, &dev_attr_regoffset); + device_remove_file(_dev, &dev_attr_regvalue); + device_remove_file(_dev, &dev_attr_mode); + device_remove_file(_dev, &dev_attr_hnpcapable); + device_remove_file(_dev, &dev_attr_srpcapable); + device_remove_file(_dev, &dev_attr_hnp); + device_remove_file(_dev, &dev_attr_srp); + device_remove_file(_dev, &dev_attr_buspower); + device_remove_file(_dev, &dev_attr_bussuspend); + device_remove_file(_dev, &dev_attr_busconnected); + device_remove_file(_dev, &dev_attr_gotgctl); + device_remove_file(_dev, &dev_attr_gusbcfg); + device_remove_file(_dev, &dev_attr_grxfsiz); + device_remove_file(_dev, &dev_attr_gnptxfsiz); + device_remove_file(_dev, &dev_attr_gpvndctl); + device_remove_file(_dev, &dev_attr_ggpio); + device_remove_file(_dev, &dev_attr_guid); + device_remove_file(_dev, &dev_attr_gsnpsid); + device_remove_file(_dev, &dev_attr_devspeed); + device_remove_file(_dev, &dev_attr_enumspeed); + device_remove_file(_dev, &dev_attr_hptxfsiz); + device_remove_file(_dev, &dev_attr_hprt0); + device_remove_file(_dev, &dev_attr_remote_wakeup); + device_remove_file(_dev, &dev_attr_regdump); + device_remove_file(_dev, &dev_attr_hcddump); + device_remove_file(_dev, &dev_attr_hcd_frrem); + device_remove_file(_dev, &dev_attr_rd_reg_test); + device_remove_file(_dev, &dev_attr_wr_reg_test); +} diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_attr.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_attr.h new file mode 100644 index 0000000000..4bbf7df02d --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_attr.h @@ -0,0 +1,67 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.h $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 510275 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_OTG_ATTR_H__) +#define __DWC_OTG_ATTR_H__ + +/** @file + * This file contains the interface to the Linux device attributes. + */ +extern struct device_attribute dev_attr_regoffset; +extern struct device_attribute dev_attr_regvalue; + +extern struct device_attribute dev_attr_mode; +extern struct device_attribute dev_attr_hnpcapable; +extern struct device_attribute dev_attr_srpcapable; +extern struct device_attribute dev_attr_hnp; +extern struct device_attribute dev_attr_srp; +extern struct device_attribute dev_attr_buspower; +extern struct device_attribute dev_attr_bussuspend; +extern struct device_attribute dev_attr_busconnected; +extern struct device_attribute dev_attr_gotgctl; +extern struct device_attribute dev_attr_gusbcfg; +extern struct device_attribute dev_attr_grxfsiz; +extern struct device_attribute dev_attr_gnptxfsiz; +extern struct device_attribute dev_attr_gpvndctl; +extern struct device_attribute dev_attr_ggpio; +extern struct device_attribute dev_attr_guid; +extern struct device_attribute dev_attr_gsnpsid; +extern struct device_attribute dev_attr_devspeed; +extern struct device_attribute dev_attr_enumspeed; +extern struct device_attribute dev_attr_hptxfsiz; +extern struct device_attribute dev_attr_hprt0; + +void dwc_otg_attr_create (struct device *_dev); +void dwc_otg_attr_remove (struct device *_dev); + +#endif diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil.c new file mode 100644 index 0000000000..42c69eba48 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil.c @@ -0,0 +1,3025 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 631780 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * The CIL manages the memory map for the core so that the HCD and PCD + * don't have to do this separately. It also handles basic tasks like + * reading/writing the registers and data FIFOs in the controller. + * Some of the data access functions provide encapsulation of several + * operations required to perform a task, such as writing multiple + * registers to start a transfer. Finally, the CIL performs basic + * services that are not specific to either the host or device modes + * of operation. These services include management of the OTG Host + * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A + * Diagnostic API is also provided to allow testing of the controller + * hardware. + * + * The Core Interface Layer has the following requirements: + * - Provides basic controller operations. + * - Minimal use of OS services. + * - The OS services used will be abstracted by using inline functions + * or macros. + * + */ +#include <asm/unaligned.h> + +#ifdef DEBUG +#include <linux/jiffies.h> +#endif + +#include "dwc_otg_plat.h" + +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" + +/** + * This function is called to initialize the DWC_otg CSR data + * structures. The register addresses in the device and host + * structures are initialized from the base address supplied by the + * caller. The calling function must make the OS calls to get the + * base address of the DWC_otg controller registers. The core_params + * argument holds the parameters that specify how the core should be + * configured. + * + * @param[in] _reg_base_addr Base address of DWC_otg core registers + * @param[in] _core_params Pointer to the core configuration parameters + * + */ +dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr, + dwc_otg_core_params_t *_core_params) +{ + dwc_otg_core_if_t *core_if = 0; + dwc_otg_dev_if_t *dev_if = 0; + dwc_otg_host_if_t *host_if = 0; + uint8_t *reg_base = (uint8_t *)_reg_base_addr; + int i = 0; + + DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, _core_params); + + core_if = kmalloc( sizeof(dwc_otg_core_if_t), GFP_KERNEL); + if (core_if == 0) { + DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n"); + return 0; + } + memset(core_if, 0, sizeof(dwc_otg_core_if_t)); + + core_if->core_params = _core_params; + core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base; + /* + * Allocate the Device Mode structures. + */ + dev_if = kmalloc( sizeof(dwc_otg_dev_if_t), GFP_KERNEL); + if (dev_if == 0) { + DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); + kfree( core_if ); + return 0; + } + + dev_if->dev_global_regs = + (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET); + + for (i=0; i<MAX_EPS_CHANNELS; i++) { + dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) + (reg_base + DWC_DEV_IN_EP_REG_OFFSET + + (i * DWC_EP_REG_OFFSET)); + + dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) + (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + + (i * DWC_EP_REG_OFFSET)); + DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", + i, &dev_if->in_ep_regs[i]->diepctl); + DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", + i, &dev_if->out_ep_regs[i]->doepctl); + } + dev_if->speed = 0; // unknown + //dev_if->num_eps = MAX_EPS_CHANNELS; + //dev_if->num_perio_eps = 0; + + core_if->dev_if = dev_if; + /* + * Allocate the Host Mode structures. + */ + host_if = kmalloc( sizeof(dwc_otg_host_if_t), GFP_KERNEL); + if (host_if == 0) { + DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n"); + kfree( dev_if ); + kfree( core_if ); + return 0; + } + + host_if->host_global_regs = (dwc_otg_host_global_regs_t *) + (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); + host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); + for (i=0; i<MAX_EPS_CHANNELS; i++) { + host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) + (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + + (i * DWC_OTG_CHAN_REGS_OFFSET)); + DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", + i, &host_if->hc_regs[i]->hcchar); + } + host_if->num_host_channels = MAX_EPS_CHANNELS; + core_if->host_if = host_if; + + for (i=0; i<MAX_EPS_CHANNELS; i++) { + core_if->data_fifo[i] = + (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET + + (i * DWC_OTG_DATA_FIFO_SIZE)); + DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", + i, (unsigned)core_if->data_fifo[i]); + } // for loop. + + core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET); + + /* + * Store the contents of the hardware configuration registers here for + * easy access later. + */ + core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1); + core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2); + core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3); + core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4); + + DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32); + DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32); + DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32); + DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32); + + + DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode); + DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture); + DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep); + DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan); + DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth); + + DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth); + DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width); + + /* + * Set the SRP sucess bit for FS-I2c + */ + core_if->srp_success = 0; + core_if->srp_timer_started = 0; + + return core_if; +} +/** + * This function frees the structures allocated by dwc_otg_cil_init(). + * + * @param[in] _core_if The core interface pointer returned from + * dwc_otg_cil_init(). + * + */ +void dwc_otg_cil_remove( dwc_otg_core_if_t *_core_if ) +{ + /* Disable all interrupts */ + dwc_modify_reg32( &_core_if->core_global_regs->gahbcfg, 1, 0); + dwc_write_reg32( &_core_if->core_global_regs->gintmsk, 0); + + if ( _core_if->dev_if ) { + kfree( _core_if->dev_if ); + } + if ( _core_if->host_if ) { + kfree( _core_if->host_if ); + } + kfree( _core_if ); +} + +/** + * This function enables the controller's Global Interrupt in the AHB Config + * register. + * + * @param[in] _core_if Programming view of DWC_otg controller. + */ +extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if ) +{ + gahbcfg_data_t ahbcfg = { .d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); +} +/** + * This function disables the controller's Global Interrupt in the AHB Config + * register. + * + * @param[in] _core_if Programming view of DWC_otg controller. + */ +extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if ) +{ + gahbcfg_data_t ahbcfg = { .d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); +} + +/** + * This function initializes the commmon interrupts, used in both + * device and host modes. + * + * @param[in] _core_if Programming view of the DWC_otg controller + * + */ +static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + _core_if->core_global_regs; + gintmsk_data_t intr_mask = { .d32 = 0}; + /* Clear any pending OTG Interrupts */ + dwc_write_reg32( &global_regs->gotgint, 0xFFFFFFFF); + /* Clear any pending interrupts */ + dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF); + /* + * Enable the interrupts in the GINTMSK. + */ + intr_mask.b.modemismatch = 1; + intr_mask.b.otgintr = 1; + if (!_core_if->dma_enable) { + intr_mask.b.rxstsqlvl = 1; + } + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + intr_mask.b.sessreqintr = 1; + dwc_write_reg32( &global_regs->gintmsk, intr_mask.d32); +} + +/** + * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY + * type. + */ +static void init_fslspclksel(dwc_otg_core_if_t *_core_if) +{ + uint32_t val; + hcfg_data_t hcfg; + + if (((_core_if->hwcfg2.b.hs_phy_type == 2) && + (_core_if->hwcfg2.b.fs_phy_type == 1) && + (_core_if->core_params->ulpi_fs_ls)) || + (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) + { + /* Full speed PHY */ + val = DWC_HCFG_48_MHZ; + } else { + /* High speed PHY running at full speed or high speed */ + val = DWC_HCFG_30_60_MHZ; + } + + DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); + hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg); + hcfg.b.fslspclksel = val; + dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32); +} + +/** + * Initializes the DevSpd field of the DCFG register depending on the PHY type + * and the enumeration speed of the device. + */ +static void init_devspd(dwc_otg_core_if_t *_core_if) +{ + uint32_t val; + dcfg_data_t dcfg; + + if (((_core_if->hwcfg2.b.hs_phy_type == 2) && + (_core_if->hwcfg2.b.fs_phy_type == 1) && + (_core_if->core_params->ulpi_fs_ls)) || + (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) + { + /* Full speed PHY */ + val = 0x3; + } else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + /* High speed PHY running at full speed */ + val = 0x1; + } else { + /* High speed PHY running at high speed */ + val = 0x0; + } + + DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); + dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg); + dcfg.b.devspd = val; + dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); +} + +/** + * This function calculates the number of IN EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param _pcd the pcd structure. + */ +static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if) +{ + uint32_t num_in_eps = 0; + uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2; + uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps; + int i; + for (i = 0; i < num_eps; ++i) { + if (!(hwcfg1 & 0x1)) + num_in_eps++; + hwcfg1 >>= 2; + } + if (_core_if->hwcfg4.b.ded_fifo_en) { + num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; + } + return num_in_eps; +} + + +/** + * This function calculates the number of OUT EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param _pcd the pcd structure. + */ +static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if) +{ + uint32_t num_out_eps = 0; + uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2; + int i; + for (i = 0; i < num_eps; ++i) { + if (!(hwcfg1 & 0x2)) + num_out_eps++; + hwcfg1 >>= 2; + } + return num_out_eps; +} +/** + * This function initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation. + * + * @param _core_if Programming view of the DWC_otg controller + * + */ +void dwc_otg_core_init(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + int i = 0; + gahbcfg_data_t ahbcfg = { .d32 = 0}; + gusbcfg_data_t usbcfg = { .d32 = 0 }; + gi2cctl_data_t i2cctl = {.d32 = 0}; + + DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n",_core_if); + + /* Common Initialization */ + + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32); + + /* Program the ULPI External VBUS bit if needed */ + //usbcfg.b.ulpi_ext_vbus_drv = 1; + //usbcfg.b.ulpi_ext_vbus_drv = 0; + usbcfg.b.ulpi_ext_vbus_drv = + (_core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; + + /* Set external TS Dline pulsing */ + usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0; + dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); + + /* Reset the Controller */ + dwc_otg_core_reset( _core_if ); + + /* Initialize parameters from Hardware configuration registers. */ +#if 0 + dev_if->num_eps = _core_if->hwcfg2.b.num_dev_ep; + dev_if->num_perio_eps = _core_if->hwcfg4.b.num_dev_perio_in_ep; +#else + dev_if->num_in_eps = calc_num_in_eps(_core_if); + dev_if->num_out_eps = calc_num_out_eps(_core_if); +#endif + DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", + _core_if->hwcfg4.b.num_dev_perio_in_ep); + DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled? %s\n", + _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No"); + DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled? %s\n", + _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No"); + DWC_DEBUGPL(DBG_CIL, "iddig filter enabled? %s\n", + _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No"); + + DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",_core_if->hwcfg4.b.num_dev_perio_in_ep); + for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { + dev_if->perio_tx_fifo_size[i] = + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i, + dev_if->perio_tx_fifo_size[i]); + } + for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) { + dev_if->tx_fifo_size[i] = + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i, + dev_if->perio_tx_fifo_size[i]); + } + + _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth; + _core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz); + _core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16; + + DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", _core_if->nperio_tx_fifo_size); + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && + (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* If FS mode with FS PHY */ + + /* core_init() is now called on every switch so only call the + * following for the first time through. */ + if (!_core_if->phy_init_done) { + _core_if->phy_init_done = 1; + DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.physel = 1; + dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); + + /* Reset after a PHY select */ + dwc_otg_core_reset( _core_if ); + } + + /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). */ + if (dwc_otg_is_host_mode(_core_if)) { + DWC_DEBUGPL(DBG_CIL, "host mode\n"); + init_fslspclksel(_core_if); + } else { + DWC_DEBUGPL(DBG_CIL, "device mode\n"); + init_devspd(_core_if); + } + + if (_core_if->core_params->i2c_enable) { + DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); + /* Program GUSBCFG.OtgUtmifsSel to I2C */ + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.otgutmifssel = 1; + dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); + + /* Program GI2CCTL.I2CEn */ + i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl); + i2cctl.b.i2cdevaddr = 1; + i2cctl.b.i2cen = 0; + dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32); + i2cctl.b.i2cen = 1; + dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32); + } + + } /* endif speed == DWC_SPEED_PARAM_FULL */ + else { + /* High speed PHY. */ + if (!_core_if->phy_init_done) { + _core_if->phy_init_done = 1; + DWC_DEBUGPL(DBG_CIL, "High spped PHY\n"); + /* HS PHY parameters. These parameters are preserved + * during soft reset so only program the first time. Do + * a soft reset immediately after setting phyif. */ + usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type; + if (usbcfg.b.ulpi_utmi_sel == 2) { // winder + DWC_DEBUGPL(DBG_CIL, "ULPI\n"); + /* ULPI interface */ + usbcfg.b.phyif = 0; + usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr; + } else { + /* UTMI+ interface */ + if (_core_if->core_params->phy_utmi_width == 16) { + usbcfg.b.phyif = 1; + DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n"); + } else { + DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n"); + usbcfg.b.phyif = 0; + } + } + dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32); + + /* Reset after setting the PHY parameters */ + dwc_otg_core_reset( _core_if ); + } + } + + if ((_core_if->hwcfg2.b.hs_phy_type == 2) && + (_core_if->hwcfg2.b.fs_phy_type == 1) && + (_core_if->core_params->ulpi_fs_ls)) + { + DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 1; + usbcfg.b.ulpi_clk_sus_m = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + } else { + DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 0; + usbcfg.b.ulpi_clk_sus_m = 0; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + } + + /* Program the GAHBCFG Register.*/ + switch (_core_if->hwcfg2.b.architecture){ + + case DWC_SLAVE_ONLY_ARCH: + DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); + ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + _core_if->dma_enable = 0; + break; + + case DWC_EXT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); + ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size; + _core_if->dma_enable = (_core_if->core_params->dma_enable != 0); + break; + + case DWC_INT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); + //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; + ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR4; + _core_if->dma_enable = (_core_if->core_params->dma_enable != 0); + break; + } + ahbcfg.b.dmaenable = _core_if->dma_enable; + dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32); + _core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en; + + /* + * Program the GUSBCFG register. + */ + usbcfg.d32 = dwc_read_reg32( &global_regs->gusbcfg ); + + switch (_core_if->hwcfg2.b.op_mode) { + case DWC_MODE_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = (_core_if->core_params->otg_cap == + DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_SRP_ONLY_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (_core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + } + + dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32); + + /* Enable common interrupts */ + dwc_otg_enable_common_interrupts( _core_if ); + + /* Do device or host intialization based on mode during PCD + * and HCD initialization */ + if (dwc_otg_is_host_mode( _core_if )) { + DWC_DEBUGPL(DBG_ANY, "Host Mode\n" ); + _core_if->op_state = A_HOST; + } else { + DWC_DEBUGPL(DBG_ANY, "Device Mode\n" ); + _core_if->op_state = B_PERIPHERAL; +#ifdef DWC_DEVICE_ONLY + dwc_otg_core_dev_init( _core_if ); +#endif + } +} + + +/** + * This function enables the Device mode interrupts. + * + * @param _core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if) +{ + gintmsk_data_t intr_mask = { .d32 = 0}; + dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs; + + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + dwc_write_reg32( &global_regs->gintmsk, 0); + + /* Clear any pending interrupts */ + dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts( _core_if ); + + /* Enable interrupts */ + intr_mask.b.usbreset = 1; + intr_mask.b.enumdone = 1; + //intr_mask.b.epmismatch = 1; + intr_mask.b.inepintr = 1; + intr_mask.b.outepintr = 1; + intr_mask.b.erlysuspend = 1; + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.epmismatch = 1; + } + + /** @todo NGS: Should this be a module parameter? */ + intr_mask.b.isooutdrop = 1; + intr_mask.b.eopframe = 1; + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; + + dwc_modify_reg32( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32); + + DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, + dwc_read_reg32( &global_regs->gintmsk)); +} + +/** + * This function initializes the DWC_otg controller registers for + * device mode. + * + * @param _core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + _core_if->core_global_regs; + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + dwc_otg_core_params_t *params = _core_if->core_params; + dcfg_data_t dcfg = {.d32 = 0}; + grstctl_t resetctl = { .d32=0 }; + int i; + uint32_t rx_fifo_size; + fifosize_data_t nptxfifosize; + fifosize_data_t txfifosize; + dthrctl_data_t dthrctl; + + fifosize_data_t ptxfifosize; + + /* Restart the Phy Clock */ + dwc_write_reg32(_core_if->pcgcctl, 0); + + /* Device configuration register */ + init_devspd(_core_if); + dcfg.d32 = dwc_read_reg32( &dev_if->dev_global_regs->dcfg); + dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; + dwc_write_reg32( &dev_if->dev_global_regs->dcfg, dcfg.d32 ); + + /* Configure data FIFO sizes */ + if ( _core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo ) { + + DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", + dwc_read_reg32(&global_regs->grxfsiz)); + rx_fifo_size = params->dev_rx_fifo_size; + dwc_write_reg32( &global_regs->grxfsiz, rx_fifo_size ); + DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", + dwc_read_reg32(&global_regs->grxfsiz)); + + /** Set Periodic Tx FIFO Mask all bits 0 */ + _core_if->p_tx_msk = 0; + + /** Set Tx FIFO Mask all bits 0 */ + _core_if->tx_msk = 0; + if (_core_if->en_multiple_tx_fifo == 0) { + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + dwc_write_reg32( &global_regs->gnptxfsiz, nptxfifosize.d32 ); + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + + + /**@todo NGS: Fix Periodic FIFO Sizing! */ + /* + * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_perio_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz array run from 0 to 14. + */ + /** @todo Finish debug of this */ + ptxfifosize.b.startaddr = + nptxfifosize.b.startaddr + nptxfifosize.b.depth; + for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) { + ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i]; + DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + ptxfifosize.b.startaddr += ptxfifosize.b.depth; + } + } else { + + /* + * Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz_dieptxf array run from 0 to 14. + */ + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) { + txfifosize.b.depth = params->dev_tx_fifo_size[i]; + DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n", + i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1])); + txfifosize.b.startaddr += txfifosize.b.depth; + } + } + } + /* Flush the FIFOs */ + dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */ + dwc_otg_flush_rx_fifo(_core_if); + + /* Flush the Learning Queue. */ + resetctl.b.intknqflsh = 1; + dwc_write_reg32( &_core_if->core_global_regs->grstctl, resetctl.d32); + + /* Clear all pending Device Interrupts */ + dwc_write_reg32( &dev_if->dev_global_regs->diepmsk, 0 ); + dwc_write_reg32( &dev_if->dev_global_regs->doepmsk, 0 ); + dwc_write_reg32( &dev_if->dev_global_regs->daint, 0xFFFFFFFF ); + dwc_write_reg32( &dev_if->dev_global_regs->daintmsk, 0 ); + + for (i = 0; i <= dev_if->num_in_eps; i++) { + depctl_data_t depctl; + depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } else { + depctl.d32 = 0; + } + dwc_write_reg32( &dev_if->in_ep_regs[i]->diepctl, depctl.d32); + + dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0); + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0); + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF); + } + for (i = 0; i <= dev_if->num_out_eps; i++) { + depctl_data_t depctl; + depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } else { + depctl.d32 = 0; + } + dwc_write_reg32( &dev_if->out_ep_regs[i]->doepctl, depctl.d32); + + //dwc_write_reg32( &dev_if->in_ep_regs[i]->dieptsiz, 0); + dwc_write_reg32( &dev_if->out_ep_regs[i]->doeptsiz, 0); + //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepdma, 0); + dwc_write_reg32( &dev_if->out_ep_regs[i]->doepdma, 0); + //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepint, 0xFF); + dwc_write_reg32( &dev_if->out_ep_regs[i]->doepint, 0xFF); + } + + if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) { + dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1; + dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1; + dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1; + dev_if->rx_thr_length = _core_if->core_params->rx_thr_length; + dev_if->tx_thr_length = _core_if->core_params->tx_thr_length; + dthrctl.d32 = 0; + dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; + dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; + dthrctl.b.tx_thr_len = dev_if->tx_thr_length; + dthrctl.b.rx_thr_en = dev_if->rx_thr_en; + dthrctl.b.rx_thr_len = dev_if->rx_thr_length; + dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32); + DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n" + "Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", + dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, + dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, + dthrctl.b.rx_thr_len); + } + dwc_otg_enable_device_interrupts( _core_if ); + { + diepmsk_data_t msk = {.d32 = 0}; + msk.b.txfifoundrn = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32); +} +} + +/** + * This function enables the Host mode interrupts. + * + * @param _core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts. */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(_core_if); + + /* + * Enable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + + //dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); + //dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); +} + +/** + * This function disables the Host Mode interrupts. + * + * @param _core_if Programming view of DWC_otg controller + */ +void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + _core_if->core_global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + + DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); + + /* + * Disable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + intr_mask.b.ptxfempty = 1; + intr_mask.b.nptxfempty = 1; + + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); +} + +#if 0 +/* currently not used, keep it here as if needed later */ +static int phy_read(dwc_otg_core_if_t * _core_if, int addr) +{ + u32 val; + int timeout = 10; + + dwc_write_reg32(&_core_if->core_global_regs->gpvndctl, + 0x02000000 | (addr << 16)); + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + while (((val & 0x08000000) == 0) && (timeout--)) { + udelay(1000); + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + } + val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl); + printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff); + + return 0; +} +#endif + +/** + * This function initializes the DWC_otg controller registers for + * host mode. + * + * This function flushes the Tx and Rx FIFOs and it flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + * + * @param _core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs; + dwc_otg_host_if_t *host_if = _core_if->host_if; + dwc_otg_core_params_t *params = _core_if->core_params; + hprt0_data_t hprt0 = {.d32 = 0}; + fifosize_data_t nptxfifosize; + fifosize_data_t ptxfifosize; + int i; + hcchar_data_t hcchar; + hcfg_data_t hcfg; + dwc_otg_hc_regs_t *hc_regs; + int num_channels; + gotgctl_data_t gotgctl = {.d32 = 0}; + + DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, _core_if); + + /* Restart the Phy Clock */ + dwc_write_reg32(_core_if->pcgcctl, 0); + + /* Initialize Host Configuration Register */ + init_fslspclksel(_core_if); + if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); + hcfg.b.fslssupp = 1; + dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); + } + + /* Configure data FIFO sizes */ + if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", _core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size); + DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz)); + dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz)); + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->host_rx_fifo_size; + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); + + /* Periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); + ptxfifosize.b.depth = params->host_perio_tx_fifo_size; + ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); + } + + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32( &global_regs->gotgctl, gotgctl.d32, 0); + + /* Make sure the FIFOs are flushed. */ + dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */); + dwc_otg_flush_rx_fifo(_core_if); + + /* Flush out any leftover queued requests. */ + num_channels = _core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + hc_regs = _core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + + /* Halt all channels to put them into a known state. */ + for (i = 0; i < num_channels; i++) { + int count = 0; + hc_regs = _core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i); + do { + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (++count > 200) { + DWC_ERROR("%s: Unable to clear halt on channel %d\n", + __func__, i); + break; + } + udelay(100); + } while (hcchar.b.chen); + } + + /* Turn on the vbus power. */ + DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state); + if (_core_if->op_state == A_HOST){ + hprt0.d32 = dwc_otg_read_hprt0(_core_if); + DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr); + if (hprt0.b.prtpwr == 0 ) { + hprt0.b.prtpwr = 1; + dwc_write_reg32(host_if->hprt0, hprt0.d32); + } + } + + dwc_otg_enable_host_interrupts( _core_if ); +} + +/** + * Prepares a host channel for transferring packets to/from a specific + * endpoint. The HCCHARn register is set up with the characteristics specified + * in _hc. Host channel interrupts that may need to be serviced while this + * transfer is in progress are enabled. + * + * @param _core_if Programming view of DWC_otg controller + * @param _hc Information needed to initialize the host channel + */ +void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + uint32_t intr_enable; + hcintmsk_data_t hc_intr_mask; + gintmsk_data_t gintmsk = {.d32 = 0}; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + + uint8_t hc_num = _hc->hc_num; + dwc_otg_host_if_t *host_if = _core_if->host_if; + dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; + + /* Clear old interrupt conditions for this host channel. */ + hc_intr_mask.d32 = 0xFFFFFFFF; + hc_intr_mask.b.reserved = 0; + dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32); + + /* Enable channel interrupts required for this transfer. */ + hc_intr_mask.d32 = 0; + hc_intr_mask.b.chhltd = 1; + if (_core_if->dma_enable) { + hc_intr_mask.b.ahberr = 1; + if (_hc->error_state && !_hc->do_split && + _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + hc_intr_mask.b.ack = 1; + if (_hc->ep_is_in) { + hc_intr_mask.b.datatglerr = 1; + if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) { + hc_intr_mask.b.nak = 1; + } + } + } + } else { + switch (_hc->ep_type) { + case DWC_OTG_EP_TYPE_CONTROL: + case DWC_OTG_EP_TYPE_BULK: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + if (_hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } else { + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.nyet = 1; + if (_hc->do_ping) { + hc_intr_mask.b.ack = 1; + } + } + + if (_hc->do_split) { + hc_intr_mask.b.nak = 1; + if (_hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } + else { + hc_intr_mask.b.ack = 1; + } + } + + if (_hc->error_state) { + hc_intr_mask.b.ack = 1; + } + break; + case DWC_OTG_EP_TYPE_INTR: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + hc_intr_mask.b.frmovrun = 1; + + if (_hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } + if (_hc->error_state) { + hc_intr_mask.b.ack = 1; + } + if (_hc->do_split) { + if (_hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } + else { + hc_intr_mask.b.ack = 1; + } + } + break; + case DWC_OTG_EP_TYPE_ISOC: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.frmovrun = 1; + hc_intr_mask.b.ack = 1; + + if (_hc->ep_is_in) { + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.bblerr = 1; + } + break; + } + } + dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32); + + /* Enable the top level host channel interrupt. */ + intr_enable = (1 << hc_num); + dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable); + + /* Make sure host channel interrupts are enabled. */ + gintmsk.b.hcintr = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer. + */ + hcchar.d32 = 0; + hcchar.b.devaddr = _hc->dev_addr; + hcchar.b.epnum = _hc->ep_num; + hcchar.b.epdir = _hc->ep_is_in; + hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW); + hcchar.b.eptype = _hc->ep_type; + hcchar.b.mps = _hc->max_packet; + + dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr); + DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum); + DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir); + DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); + DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt); + + /* + * Program the HCSPLIT register for SPLITs + */ + hcsplt.d32 = 0; + if (_hc->do_split) { + DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", _hc->hc_num, + _hc->complete_split ? "CSPLIT" : "SSPLIT"); + hcsplt.b.compsplt = _hc->complete_split; + hcsplt.b.xactpos = _hc->xact_pos; + hcsplt.b.hubaddr = _hc->hub_addr; + hcsplt.b.prtaddr = _hc->port_addr; + DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", _hc->complete_split); + DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", _hc->xact_pos); + DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", _hc->hub_addr); + DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", _hc->port_addr); + DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", _hc->ep_is_in); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", _hc->xfer_len); + } + dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); + +} + +/** + * Attempts to halt a host channel. This function should only be called in + * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under + * normal circumstances in DMA mode, the controller halts the channel when the + * transfer is complete or a condition occurs that requires application + * intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + * + * @param _core_if Controller register interface. + * @param _hc Host channel to halt. + * @param _halt_status Reason for halting the channel. + */ +void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if, + dwc_hc_t *_hc, + dwc_otg_halt_status_e _halt_status) +{ + gnptxsts_data_t nptxsts; + hptxsts_data_t hptxsts; + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs; + dwc_otg_core_global_regs_t *global_regs; + dwc_otg_host_global_regs_t *host_global_regs; + + hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + global_regs = _core_if->core_global_regs; + host_global_regs = _core_if->host_if->host_global_regs; + + WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS); + + if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + _halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + hcintmsk_data_t hcintmsk; + hcintmsk.d32 = 0; + hcintmsk.b.chhltd = 1; + dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason. + */ + _hc->halt_status = _halt_status; + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen == 0) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + + if (_hc->halt_pending) { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ +#ifdef DEBUG + DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n", + __func__, _hc->hc_num); + +/* dwc_otg_dump_global_registers(_core_if); */ +/* dwc_otg_dump_host_registers(_core_if); */ +#endif + return; + } + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + + if (!_core_if->dma_enable) { + /* Check for space in the request queue to issue the halt. */ + if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + _hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (nptxsts.b.nptxqspcavail == 0) { + hcchar.b.chen = 0; + } + } else { + hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts); + if ((hptxsts.b.ptxqspcavail == 0) || (_core_if->queuing_high_bandwidth)) { + hcchar.b.chen = 0; + } + } + } + + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + _hc->halt_status = _halt_status; + + if (hcchar.b.chen) { + _hc->halt_pending = 1; + _hc->halt_on_queue = 0; + } else { + _hc->halt_on_queue = 1; + } + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", _hc->halt_pending); + DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", _hc->halt_on_queue); + DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", _hc->halt_status); + + return; +} + +/** + * Clears the transfer state for a host channel. This function is normally + * called after a transfer is done and the host channel is being released. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _hc Identifies the host channel to clean up. + */ +void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + dwc_otg_hc_regs_t *hc_regs; + + _hc->xfer_started = 0; + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions. + */ + hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + dwc_write_reg32(&hc_regs->hcintmsk, 0); + dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF); + +#ifdef DEBUG + del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]); + { + hcchar_data_t hcchar; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, _hc->hc_num, hcchar.d32); + } + } +#endif +} + +/** + * Sets the channel property that indicates in which frame a periodic transfer + * should occur. This is always set to the _next_ frame. This function has no + * effect on non-periodic transfers. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _hc Identifies the host channel to set up and its properties. + * @param _hcchar Current value of the HCCHAR register for the specified host + * channel. + */ +static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *_core_if, + dwc_hc_t *_hc, + hcchar_data_t *_hcchar) +{ + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hfnum_data_t hfnum; + hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum); + /* 1 if _next_ frame is odd, 0 if it's even */ + _hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; +#ifdef DEBUG + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split && !_hc->complete_split) { + switch (hfnum.b.frnum & 0x7) { + case 7: + _core_if->hfnum_7_samples++; + _core_if->hfnum_7_frrem_accum += hfnum.b.frrem; + break; + case 0: + _core_if->hfnum_0_samples++; + _core_if->hfnum_0_frrem_accum += hfnum.b.frrem; + break; + default: + _core_if->hfnum_other_samples++; + _core_if->hfnum_other_frrem_accum += hfnum.b.frrem; + break; + } + } +#endif + } +} + +#ifdef DEBUG +static void hc_xfer_timeout(unsigned long _ptr) +{ + hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr; + int hc_num = xfer_info->hc->hc_num; + DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); + DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]); +} +#endif + +/* + * This function does the setup for a data transfer for a host channel and + * starts the transfer. May be called in either Slave mode or DMA mode. In + * Slave mode, the caller must ensure that there is sufficient space in the + * request queue and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets will be loaded in + * the Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _hc Information needed to initialize the host channel. The xfer_len + * value may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be changed + * to reflect the final xfer_len value. + */ +void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + uint16_t num_packets; + uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size; + uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count; + dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + + hctsiz.d32 = 0; + + if (_hc->do_ping) { + if (!_core_if->dma_enable) { + dwc_otg_hc_do_ping(_core_if, _hc); + _hc->xfer_started = 1; + return; + } else { + hctsiz.b.dopng = 1; + } + } + + if (_hc->do_split) { + num_packets = 1; + + if (_hc->complete_split && !_hc->ep_is_in) { + /* For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO */ + _hc->xfer_len = 0; + } else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) { + _hc->xfer_len = _hc->max_packet; + } else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) { + _hc->xfer_len = 188; + } + + hctsiz.b.xfersize = _hc->xfer_len; + } else { + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register. + */ + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet; + if (_hc->xfer_len > max_periodic_len) { + _hc->xfer_len = max_periodic_len; + } else { + } + } else if (_hc->xfer_len > max_hc_xfer_size) { + /* Make sure that xfer_len is a multiple of max packet size. */ + _hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1; + } + + if (_hc->xfer_len > 0) { + num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + _hc->xfer_len = num_packets * _hc->max_packet; + } + } else { + /* Need 1 packet for transfer length of 0. */ + num_packets = 1; + } + + if (_hc->ep_is_in) { + /* Always program an integral # of max packets for IN transfers. */ + _hc->xfer_len = num_packets * _hc->max_packet; + } + + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure that the multi_count field matches the + * actual transfer length. + */ + _hc->multi_count = num_packets; + + } + + if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* Set up the initial PID for the transfer. */ + if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) { + if (_hc->ep_is_in) { + if (_hc->multi_count == 1) { + _hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } else if (_hc->multi_count == 2) { + _hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + } else { + _hc->data_pid_start = DWC_OTG_HC_PID_DATA2; + } + } else { + if (_hc->multi_count == 1) { + _hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } else { + _hc->data_pid_start = DWC_OTG_HC_PID_MDATA; + } + } + } else { + _hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } + } + + hctsiz.b.xfersize = _hc->xfer_len; + } + + _hc->start_pkt_count = num_packets; + hctsiz.b.pktcnt = num_packets; + hctsiz.b.pid = _hc->data_pid_start; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); + + if (_core_if->dma_enable) { +#ifdef DEBUG +if(((uint32_t)_hc->xfer_buff)%4) +printk("dwc_otg_hc_start_transfer _hc->xfer_buff not 4 byte alignment\n"); +#endif + dwc_write_reg32(&hc_regs->hcdma, (uint32_t)_hc->xfer_buff); + } + + /* Start the split */ + if (_hc->do_split) { + hcsplt_data_t hcsplt; + hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt); + hcsplt.b.spltena = 1; + dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32); + } + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.multicnt = _hc->multi_count; + hc_set_even_odd_frame(_core_if, _hc, &hcchar); +#ifdef DEBUG + _core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32; + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, _hc->hc_num, hcchar.d32); + } +#endif + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + _hc->xfer_started = 1; + _hc->requests++; + + if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) { + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(_core_if, _hc); + } + +#ifdef DEBUG + /* Start a timer for this transfer. */ + _core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout; + _core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if; + _core_if->hc_xfer_info[_hc->hc_num].hc = _hc; + _core_if->hc_xfer_timer[_hc->hc_num].data = (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]); + _core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ*10); + add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]); +#endif +} + +/** + * This function continues a data transfer that was started by previous call + * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is + * sufficient space in the request queue and Tx Data FIFO. This function + * should only be called in Slave mode. In DMA mode, the controller acts + * autonomously to complete transfers programmed to a host channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * @return 1 if a new request is queued, 0 if no more requests are required + * for this transfer. + */ +int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + + if (_hc->do_split) { + /* SPLITs always queue just once per channel */ + return 0; + } else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + /* SETUPs are queued only once since they can't be NAKed. */ + return 0; + } else if (_hc->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAKed request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hc_set_even_odd_frame(_core_if, _hc, &hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32); + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + _hc->requests++; + return 1; + } else { + /* OUT transfers. */ + if (_hc->xfer_count < _hc->xfer_len) { + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs; + hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hc_set_even_odd_frame(_core_if, _hc, &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(_core_if, _hc); + _hc->requests++; + return 1; + } else { + return 0; + } + } +} + +/** + * Starts a PING transfer. This function should only be called in Slave mode. + * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. + */ +void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num]; + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num); + + hctsiz.d32 = 0; + hctsiz.b.dopng = 1; + hctsiz.b.pktcnt = 1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); +} + +/* + * This function writes a packet into the Tx FIFO associated with the Host + * Channel. For a channel associated with a non-periodic EP, the non-periodic + * Tx FIFO is written. For a channel associated with a periodic EP, the + * periodic Tx FIFO is written. This function should only be called in Slave + * mode. + * + * Upon return the xfer_buff and xfer_count fields in _hc are incremented by + * then number of bytes written to the Tx FIFO. + */ +void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + uint32_t i; + uint32_t remaining_count; + uint32_t byte_count; + uint32_t dword_count; + + uint32_t *data_buff = (uint32_t *)(_hc->xfer_buff); + uint32_t *data_fifo = _core_if->data_fifo[_hc->hc_num]; + + remaining_count = _hc->xfer_len - _hc->xfer_count; + if (remaining_count > _hc->max_packet) { + byte_count = _hc->max_packet; + } else { + byte_count = remaining_count; + } + + dword_count = (byte_count + 3) / 4; + + if ((((unsigned long)data_buff) & 0x3) == 0) { + /* xfer_buff is DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_reg32(data_fifo, *data_buff); + } + } else { + /* xfer_buff is not DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) { + dwc_write_reg32(data_fifo, get_unaligned(data_buff)); + } + } + + _hc->xfer_count += byte_count; + _hc->xfer_buff += byte_count; +} + +/** + * Gets the current USB frame number. This is the frame number from the last + * SOF packet. + */ +uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if) +{ + dsts_data_t dsts; + dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts); + + /* read current frame/microfreme number from DSTS register */ + return dsts.b.soffn; +} + +/** + * This function reads a setup packet from the Rx FIFO into the destination + * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) + * Interrupt routine when a SETUP packet has been received in Slave mode. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _dest Destination buffer for packet data. + */ +void dwc_otg_read_setup_packet(dwc_otg_core_if_t *_core_if, uint32_t *_dest) +{ + /* Get the 8 bytes of a setup transaction data */ + + /* Pop 2 DWORDS off the receive data FIFO into memory */ + _dest[0] = dwc_read_reg32(_core_if->data_fifo[0]); + _dest[1] = dwc_read_reg32(_core_if->data_fifo[0]); + //_dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]); + //_dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]); +} + + +/** + * This function enables EP0 OUT to receive SETUP packets and configures EP0 + * IN for transmitting packets. It is normally called when the + * "Enumeration Done" interrupt occurs. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP0 data. + */ +void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + dsts_data_t dsts; + depctl_data_t diepctl; + depctl_data_t doepctl; + dctl_data_t dctl ={.d32=0}; + + /* Read the Device Status and Endpoint 0 Control registers */ + dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts); + diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl); + doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl); + + /* Set the MPS of the IN EP based on the enumeration speed */ + switch (dsts.b.enumspd) { + case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_64; + break; + case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_8; + break; + } + + dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); + + /* Enable OUT EP for receive */ + doepctl.b.epena = 1; + dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", + dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); + DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", + dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); +#endif + dctl.b.cgnpinnak = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); + DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n", + dwc_read_reg32(&dev_if->dev_global_regs->dctl)); +} + +/** + * This function activates an EP. The Device EP control register for + * the EP is configured as defined in the ep structure. Note: This + * function is not used for EP0. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to activate. + */ +void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + depctl_data_t depctl; + volatile uint32_t *addr; + daint_data_t daintmsk = {.d32=0}; + + DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num, + (_ep->is_in?"IN":"OUT")); + + /* Read DEPCTLn register */ + if (_ep->is_in == 1) { + addr = &dev_if->in_ep_regs[_ep->num]->diepctl; + daintmsk.ep.in = 1<<_ep->num; + } else { + addr = &dev_if->out_ep_regs[_ep->num]->doepctl; + daintmsk.ep.out = 1<<_ep->num; + } + + /* If the EP is already active don't change the EP Control + * register. */ + depctl.d32 = dwc_read_reg32(addr); + if (!depctl.b.usbactep) { + depctl.b.mps = _ep->maxpacket; + depctl.b.eptype = _ep->type; + depctl.b.txfnum = _ep->tx_fifo_num; + + if (_ep->type == DWC_OTG_EP_TYPE_ISOC) { + depctl.b.setd0pid = 1; // ??? + } else { + depctl.b.setd0pid = 1; + } + depctl.b.usbactep = 1; + + dwc_write_reg32(addr, depctl.d32); + DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr)); + } + + + /* Enable the Interrupt for this EP */ + dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk, + 0, daintmsk.d32); + DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n", + dwc_read_reg32(&dev_if->dev_global_regs->daintmsk)); + _ep->stall_clear_flag = 0; + return; +} + +/** + * This function deactivates an EP. This is done by clearing the USB Active + * EP bit in the Device EP control register. Note: This function is not used + * for EP0. EP0 cannot be deactivated. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to deactivate. + */ +void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + depctl_data_t depctl ={.d32 = 0}; + volatile uint32_t *addr; + daint_data_t daintmsk = {.d32=0}; + + /* Read DEPCTLn register */ + if (_ep->is_in == 1) { + addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl; + daintmsk.ep.in = 1<<_ep->num; + } else { + addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl; + daintmsk.ep.out = 1<<_ep->num; + } + + depctl.b.usbactep = 0; + dwc_write_reg32(addr, depctl.d32); + + /* Disable the Interrupt for this EP */ + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk, + daintmsk.d32, 0); + + return; +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to start the transfer on. + */ +void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + /** @todo Refactor this funciton to check the transfer size + * count value does not execed the number bits in the Transfer + * count register. */ + depctl_data_t depctl; + deptsiz_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + +#ifdef CHECK_PACKET_COUNTER_WIDTH + const uint32_t MAX_XFER_SIZE = + _core_if->core_params->max_transfer_size; + const uint32_t MAX_PKT_COUNT = + _core_if->core_params->max_packet_count; + uint32_t num_packets; + uint32_t transfer_len; + dwc_otg_dev_out_ep_regs_t *out_regs = + _core_if->dev_if->out_ep_regs[_ep->num]; + dwc_otg_dev_in_ep_regs_t *in_regs = + _core_if->dev_if->in_ep_regs[_ep->num]; + gnptxsts_data_t txstatus; + + int lvl = SET_DEBUG_LEVEL(DBG_PCD); + + + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p\n", + _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, + _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff); + + transfer_len = _ep->xfer_len - _ep->xfer_count; + if (transfer_len > MAX_XFER_SIZE) { + transfer_len = MAX_XFER_SIZE; + } + if (transfer_len == 0) { + num_packets = 1; + /* OUT EP to recieve Zero-length packet set transfer + * size to maxpacket size. */ + if (!_ep->is_in) { + transfer_len = _ep->maxpacket; + } + } else { + num_packets = + (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket; + if (num_packets > MAX_PKT_COUNT) { + num_packets = MAX_PKT_COUNT; + } + } + DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len, + num_packets); + + deptsiz.b.xfersize = transfer_len; + deptsiz.b.pktcnt = num_packets; + + /* IN endpoint */ + if (_ep->is_in == 1) { + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + } else {/* OUT endpoint */ + depctl.d32 = dwc_read_reg32(&out_regs->doepctl); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + /* IN endpoint */ + if (_ep->is_in == 1) { + txstatus.d32 = + dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + if (txstatus.b.nptxqspcavail == 0) { + DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n", + txstatus.d32); + return; + } + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (_core_if->dma_enable) { + dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff); + } else { + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32( &_core_if->core_global_regs->gintsts, + intr_mask.d32, 0); + dwc_modify_reg32( &_core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (_ep->xfer_len > 0 && + _ep->type != DWC_OTG_EP_TYPE_ISOC) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = (0x1 << _ep->num); + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs-> + dtknqr4_fifoemptymsk,0, fifoemptymsk); + } + } + } + } else { /* OUT endpoint */ + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + if (_core_if->dma_enable) { + dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff); + } + } + DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", + dwc_read_reg32(&out_regs->doepctl), + dwc_read_reg32(&out_regs->doeptsiz)); + DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", + dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk), + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); + + SET_DEBUG_LEVEL(lvl); +#endif + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); + + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p\n", + _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, + _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff); + + /* IN endpoint */ + if (_ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num]; + gnptxsts_data_t gtxstatus; + gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + if (_core_if->en_multiple_tx_fifo == 0 && + gtxstatus.b.nptxqspcavail == 0) { +#ifdef DEBUG + DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32); +#endif + //return; + MDELAY(100); //james + } + + depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); + deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); + + /* Zero Length Packet? */ + if (_ep->xfer_len == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } else { + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = _ep->xfer_len; + deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket; + } + + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + + /* Write the DMA register */ + if (_core_if->dma_enable) { +#if 1 // winder + dma_cache_wback_inv((unsigned long) _ep->xfer_buff, _ep->xfer_len); // winder + dwc_write_reg32 (&(in_regs->diepdma), + CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder +#else + dwc_write_reg32 (&(in_regs->diepdma), + (uint32_t)_ep->dma_addr); +#endif + } else { + if (_ep->type != DWC_OTG_EP_TYPE_ISOC) { + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, + * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, + * the data will be written into the fifo by the ISR. + */ + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32( &_core_if->core_global_regs->gintsts, + intr_mask.d32, 0); + dwc_modify_reg32( &_core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (_ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = 1 << _ep->num; + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs-> + dtknqr4_fifoemptymsk,0,fifoemptymsk); + } + } + } + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + if (_core_if->dma_enable) { + depctl.d32 = dwc_read_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl); + depctl.b.nextep = _ep->num; + dwc_write_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32); + + } + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num]; + + depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); + deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); + + /* Program the transfer size and packet count as follows: + * + * pktcnt = N + * xfersize = N * maxpacket + */ + if (_ep->xfer_len == 0) { + /* Zero Length Packet */ + deptsiz.b.xfersize = _ep->maxpacket; + deptsiz.b.pktcnt = 1; + } else { + deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket; + } + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + + DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", + _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); + + if (_core_if->dma_enable) { +#if 1 // winder + dwc_write_reg32 (&(out_regs->doepdma), + CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder +#else + dwc_write_reg32 (&(out_regs->doepdma), + (uint32_t)_ep->dma_addr); +#endif + } + + if (_ep->type == DWC_OTG_EP_TYPE_ISOC) { + /** @todo NGS: dpid is read-only. Use setd0pid + * or setd1pid. */ + if (_ep->even_odd_frame) { + depctl.b.setd1pid = 1; + } else { + depctl.b.setd0pid = 1; + } + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + + DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", + dwc_read_reg32(&out_regs->doepctl), + dwc_read_reg32(&out_regs->doeptsiz)); + DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", + dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk), + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); + } +} + + +/** + * This function does the setup for a data transfer for EP0 and starts + * the transfer. For an IN transfer, the packets will be loaded into + * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are + * unloaded from the Rx FIFO in the ISR. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP0 data. + */ +void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + volatile depctl_data_t depctl; + volatile deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p total_len=%d\n", + _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len, + _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff, + _ep->total_len); + _ep->total_len = _ep->xfer_len; + + /* IN endpoint */ + if (_ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0]; + gnptxsts_data_t gtxstatus; + gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + if (_core_if->en_multiple_tx_fifo == 0 && + gtxstatus.b.nptxqspcavail == 0) { +#ifdef DEBUG + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n", + dwc_read_reg32(&in_regs->diepctl)); + DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", + deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt); + DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32); +#endif /* */ + printk("TX Queue or FIFO Full!!!!\n"); // test-only + //return; + MDELAY(100); //james + } + + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + + /* Zero Length Packet? */ + if (_ep->xfer_len == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + if (_ep->xfer_len > _ep->maxpacket) { + _ep->xfer_len = _ep->maxpacket; + deptsiz.b.xfersize = _ep->maxpacket; + } + else { + deptsiz.b.xfersize = _ep->xfer_len; + } + deptsiz.b.pktcnt = 1; + + } + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (_core_if->dma_enable) { + dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!_core_if->dma_enable) { + if (_core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0); + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32, + intr_mask.d32); + } else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (_ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk |= 1 << _ep->num; + dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + + } + } + } else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num]; + + depctl.d32 = dwc_read_reg32(&out_regs->doepctl); + deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); + + /* Program the transfer size and packet count as follows: + * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) + * pktcnt = N */ + if (_ep->xfer_len == 0) { + /* Zero Length Packet */ + deptsiz.b.xfersize = _ep->maxpacket; + deptsiz.b.pktcnt = 1; + } else { + deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket; + } + + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", + _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt); + + if (_core_if->dma_enable) { + dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32 (&(out_regs->doepctl), depctl.d32); + } +} + +/** + * This function continues control IN transfers started by + * dwc_otg_ep0_start_transfer, when the transfer does not fit in a + * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one + * bit for the packet count. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP0 data. + */ +void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + depctl_data_t depctl; + deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + + if (_ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + _core_if->dev_if->in_ep_regs[0]; + gnptxsts_data_t tx_status = {.d32 = 0}; + + tx_status.d32 = dwc_read_reg32( &_core_if->core_global_regs->gnptxsts ); + /** @todo Should there be check for room in the Tx + * Status Queue. If not remove the code above this comment. */ + + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > _ep->maxpacket ? _ep->maxpacket : + (_ep->total_len - _ep->xfer_count); + deptsiz.b.pktcnt = 1; + _ep->xfer_len += deptsiz.b.xfersize; + + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + _ep->xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { + dwc_write_reg32 (&(in_regs->diepdma), + CPHYSADDR((uint32_t)_ep->dma_addr)); // winder + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!_core_if->dma_enable) { + /* First clear it from GINTSTS */ + intr_mask.b.nptxfempty = 1; + dwc_write_reg32( &_core_if->core_global_regs->gintsts, + intr_mask.d32 ); + + dwc_modify_reg32( &_core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } + + } + +} + +#ifdef DEBUG +void dump_msg(const u8 *buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + start = 0; + while (length > 0) { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + DWC_PRINT( "%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} +#else +static inline void dump_msg(const u8 *buf, unsigned int length) +{ +} +#endif + +/** + * This function writes a packet into the Tx FIFO associated with the + * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For + * periodic EPs the periodic Tx FIFO associated with the EP is written + * with all packets for the next micro-frame. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to write packet for. + * @param _dma Indicates if DMA is being used. + */ +void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma) +{ + /** + * The buffer is padded to DWORD on a per packet basis in + * slave/dma mode if the MPS is not DWORD aligned. The last + * packet, if short, is also padded to a multiple of DWORD. + * + * ep->xfer_buff always starts DWORD aligned in memory and is a + * multiple of DWORD in length + * + * ep->xfer_len can be any number of bytes + * + * ep->xfer_count is a multiple of ep->maxpacket until the last + * packet + * + * FIFO access is DWORD */ + + uint32_t i; + uint32_t byte_count; + uint32_t dword_count; + uint32_t *fifo; + uint32_t *data_buff = (uint32_t *)_ep->xfer_buff; + + //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep); + if (_ep->xfer_count >= _ep->xfer_len) { + DWC_WARN("%s() No data for EP%d!!!\n", __func__, _ep->num); + return; + } + + /* Find the byte length of the packet either short packet or MPS */ + if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) { + byte_count = _ep->xfer_len - _ep->xfer_count; + } + else { + byte_count = _ep->maxpacket; + } + + /* Find the DWORD length, padded by extra bytes as neccessary if MPS + * is not a multiple of DWORD */ + dword_count = (byte_count + 3) / 4; + +#ifdef VERBOSE + dump_msg(_ep->xfer_buff, byte_count); +#endif + if (_ep->type == DWC_OTG_EP_TYPE_ISOC) { + /**@todo NGS Where are the Periodic Tx FIFO addresses + * intialized? What should this be? */ + fifo = _core_if->data_fifo[_ep->tx_fifo_num]; + } else { + fifo = _core_if->data_fifo[_ep->num]; + } + + DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", + fifo, data_buff, *data_buff, byte_count); + + + if (!_dma) { + for (i=0; i<dword_count; i++, data_buff++) { + dwc_write_reg32( fifo, *data_buff ); + } + } + + _ep->xfer_count += byte_count; + _ep->xfer_buff += byte_count; +#if 1 // winder, why do we need this?? + _ep->dma_addr += byte_count; +#endif +} + +/** + * Set the EP STALL. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to set the stall on. + */ +void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, + (_ep->is_in?"IN":"OUT")); + + if (_ep->is_in == 1) { + depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl); + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* set the disable and stall bits */ + if (depctl.b.epena) { + depctl.b.epdis = 1; + } + depctl.b.stall = 1; + dwc_write_reg32(depctl_addr, depctl.d32); + + } else { + depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl); + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* set the stall bit */ + depctl.b.stall = 1; + dwc_write_reg32(depctl_addr, depctl.d32); + } + DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr)); + return; +} + +/** + * Clear the EP STALL. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _ep The EP to clear stall from. + */ +void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num, + (_ep->is_in?"IN":"OUT")); + + if (_ep->is_in == 1) { + depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl); + } else { + depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl); + } + + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* clear the stall bits */ + depctl.b.stall = 0; + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (_ep->type == DWC_OTG_EP_TYPE_INTR || + _ep->type == DWC_OTG_EP_TYPE_BULK) { + depctl.b.setd0pid = 1; /* DATA0 */ + } + + dwc_write_reg32(depctl_addr, depctl.d32); + DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr)); + return; +} + +/** + * This function reads a packet from the Rx FIFO into the destination + * buffer. To read SETUP data use dwc_otg_read_setup_packet. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _dest Destination buffer for the packet. + * @param _bytes Number of bytes to copy to the destination. + */ +void dwc_otg_read_packet(dwc_otg_core_if_t *_core_if, + uint8_t *_dest, + uint16_t _bytes) +{ + int i; + int word_count = (_bytes + 3) / 4; + + volatile uint32_t *fifo = _core_if->data_fifo[0]; + uint32_t *data_buff = (uint32_t *)_dest; + + /** + * @todo Account for the case where _dest is not dword aligned. This + * requires reading data from the FIFO into a uint32_t temp buffer, + * then moving it into the data buffer. + */ + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, + _core_if, _dest, _bytes); + + for (i=0; i<word_count; i++, data_buff++) { + *data_buff = dwc_read_reg32(fifo); + } + + return; +} + + +#ifdef DEBUG +/** + * This functions reads the device registers and prints them + * + * @param _core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINT("Device Global Registers\n"); + addr=&_core_if->dev_if->dev_global_regs->dcfg; + DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->dev_global_regs->dctl; + DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->dev_global_regs->dsts; + DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->dev_global_regs->diepmsk; + DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->dev_global_regs->doepmsk; + DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->dev_global_regs->daint; + DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->dev_global_regs->dtknqr1; + DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + if (_core_if->hwcfg2.b.dev_token_q_depth > 6) { + addr=&_core_if->dev_if->dev_global_regs->dtknqr2; + DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", + (uint32_t)addr,dwc_read_reg32(addr)); + } + + addr=&_core_if->dev_if->dev_global_regs->dvbusdis; + DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + addr=&_core_if->dev_if->dev_global_regs->dvbuspulse; + DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", + (uint32_t)addr,dwc_read_reg32(addr)); + + if (_core_if->hwcfg2.b.dev_token_q_depth > 14) { + addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; + DWC_PRINT("DTKNQR3 @0x%08X : 0x%08X\n", + (uint32_t)addr, dwc_read_reg32(addr)); + } + + if (_core_if->hwcfg2.b.dev_token_q_depth > 22) { + addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; + DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + } + for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) { + DWC_PRINT("Device IN EP %d Registers\n", i); + addr=&_core_if->dev_if->in_ep_regs[i]->diepctl; + DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->in_ep_regs[i]->diepint; + DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->in_ep_regs[i]->dieptsiz; + DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->in_ep_regs[i]->diepdma; + DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + +addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts; + DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n", (uint32_t) addr, + dwc_read_reg32(addr)); + } + for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) { + DWC_PRINT("Device OUT EP %d Registers\n", i); + addr=&_core_if->dev_if->out_ep_regs[i]->doepctl; + DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->out_ep_regs[i]->doepfn; + DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->out_ep_regs[i]->doepint; + DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->out_ep_regs[i]->doeptsiz; + DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->dev_if->out_ep_regs[i]->doepdma; + DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + } + return; +} + +/** + * This function reads the host registers and prints them + * + * @param _core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINT("Host Global Registers\n"); + addr=&_core_if->host_if->host_global_regs->hcfg; + DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->host_global_regs->hfir; + DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->host_global_regs->hfnum; + DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->host_global_regs->hptxsts; + DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->host_global_regs->haint; + DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->host_global_regs->haintmsk; + DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=_core_if->host_if->hprt0; + DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + for (i=0; i<_core_if->core_params->host_channels; i++) { + DWC_PRINT("Host Channel %d Specific Registers\n", i); + addr=&_core_if->host_if->hc_regs[i]->hcchar; + DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->hc_regs[i]->hcsplt; + DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->hc_regs[i]->hcint; + DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->hc_regs[i]->hcintmsk; + DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->hc_regs[i]->hctsiz; + DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->host_if->hc_regs[i]->hcdma; + DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + } + return; +} + +/** + * This function reads the core global registers and prints them + * + * @param _core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINT("Core Global Registers\n"); + addr=&_core_if->core_global_regs->gotgctl; + DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gotgint; + DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gahbcfg; + DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gusbcfg; + DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->grstctl; + DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gintsts; + DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gintmsk; + DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->grxstsr; + DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + //addr=&_core_if->core_global_regs->grxstsp; + //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->grxfsiz; + DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gnptxfsiz; + DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gnptxsts; + DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gi2cctl; + DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gpvndctl; + DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->ggpio; + DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->guid; + DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->gsnpsid; + DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->ghwcfg1; + DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->ghwcfg2; + DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->ghwcfg3; + DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->ghwcfg4; + DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&_core_if->core_global_regs->hptxfsiz; + DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + for (i=0; i<_core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { + addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i]; + DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr)); + } + +} +#endif + +/** + * Flush a Tx FIFO. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _num Tx FIFO to flush. + */ +extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, + const int _num ) +{ + dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset = { .d32 = 0}; + int count = 0; + + DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num); + + greset.b.txfflsh = 1; + greset.b.txfnum = _num; + dwc_write_reg32( &global_regs->grstctl, greset.d32 ); + + do { + greset.d32 = dwc_read_reg32( &global_regs->grstctl); + if (++count > 10000){ + DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset.d32, + dwc_read_reg32( &global_regs->gnptxsts)); + break; + } + + udelay(1); + } while (greset.b.txfflsh == 1); + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + +/** + * Flush Rx FIFO. + * + * @param _core_if Programming view of DWC_otg controller. + */ +extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ) +{ + dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset = { .d32 = 0}; + int count = 0; + + DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__); + /* + * + */ + greset.b.rxfflsh = 1; + dwc_write_reg32( &global_regs->grstctl, greset.d32 ); + + do { + greset.d32 = dwc_read_reg32( &global_regs->grstctl); + if (++count > 10000){ + DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, + greset.d32); + break; + } + } while (greset.b.rxfflsh == 1); + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + +/** + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ + +void dwc_otg_core_reset(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset = { .d32 = 0}; + int count = 0; + + DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); + /* Wait for AHB master IDLE state. */ + do { + UDELAY(10); + greset.d32 = dwc_read_reg32( &global_regs->grstctl); + if (++count > 100000){ + DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__, + greset.d32, greset.b.ahbidle); + return; + } + } while (greset.b.ahbidle == 0); + +// winder add. +#if 1 + /* Note: Actually, I don't exactly why we need to put delay here. */ + MDELAY(100); +#endif + /* Core Soft Reset */ + count = 0; + greset.b.csftrst = 1; + dwc_write_reg32( &global_regs->grstctl, greset.d32 ); +// winder add. +#if 1 + /* Note: Actually, I don't exactly why we need to put delay here. */ + MDELAY(100); +#endif + do { + greset.d32 = dwc_read_reg32( &global_regs->grstctl); + if (++count > 10000){ + DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, + greset.d32); + break; + } + udelay(1); + } while (greset.b.csftrst == 1); + /* Wait for 3 PHY Clocks*/ + //DWC_PRINT("100ms\n"); + MDELAY(100); +} + + + +/** + * Register HCD callbacks. The callbacks are used to start and stop + * the HCD for interrupt processing. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _cb the HCD callback structure. + * @param _p pointer to be passed to callback function (usb_hcd*). + */ +extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p) +{ + _core_if->hcd_cb = _cb; + _cb->p = _p; +} + +/** + * Register PCD callbacks. The callbacks are used to start and stop + * the PCD for interrupt processing. + * + * @param _core_if Programming view of DWC_otg controller. + * @param _cb the PCD callback structure. + * @param _p pointer to be passed to callback function (pcd*). + */ +extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p) +{ + _core_if->pcd_cb = _cb; + _cb->p = _p; +} + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil.h new file mode 100644 index 0000000000..bbb9516b85 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil.h @@ -0,0 +1,911 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.h $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 631780 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_CIL_H__) +#define __DWC_CIL_H__ + +#include "dwc_otg_plat.h" + +#include "dwc_otg_regs.h" +#ifdef DEBUG +#include "linux/timer.h" +#endif + +/* the OTG capabilities. */ +#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 +/* the maximum speed of operation in host and device mode. */ +#define DWC_SPEED_PARAM_HIGH 0 +#define DWC_SPEED_PARAM_FULL 1 +/* the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. */ +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 +/* the type of PHY interface to use. */ +#define DWC_PHY_TYPE_PARAM_FS 0 +#define DWC_PHY_TYPE_PARAM_UTMI 1 +#define DWC_PHY_TYPE_PARAM_ULPI 2 +/* whether to use the internal or external supply to + * drive the vbus with a ULPI phy. */ +#define DWC_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 +/* EP type. */ + +/** + * @file + * This file contains the interface to the Core Interface Layer. + */ + +/** + * The <code>dwc_ep</code> structure represents the state of a single + * endpoint when acting in device mode. It contains the data items + * needed for an endpoint to be activated and transfer packets. + */ +typedef struct dwc_ep { + /** EP number used for register address lookup */ + uint8_t num; + /** EP direction 0 = OUT */ + unsigned is_in : 1; + /** EP active. */ + unsigned active : 1; + + /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO + If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/ + unsigned tx_fifo_num : 4; + /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ + unsigned type : 2; +#define DWC_OTG_EP_TYPE_CONTROL 0 +#define DWC_OTG_EP_TYPE_ISOC 1 +#define DWC_OTG_EP_TYPE_BULK 2 +#define DWC_OTG_EP_TYPE_INTR 3 + + /** DATA start PID for INTR and BULK EP */ + unsigned data_pid_start : 1; + /** Frame (even/odd) for ISOC EP */ + unsigned even_odd_frame : 1; + /** Max Packet bytes */ + unsigned maxpacket : 11; + + /** @name Transfer state */ + /** @{ */ + + /** + * Pointer to the beginning of the transfer buffer -- do not modify + * during transfer. + */ + + uint32_t dma_addr; + + uint8_t *start_xfer_buff; + /** pointer to the transfer buffer */ + uint8_t *xfer_buff; + /** Number of bytes to transfer */ + unsigned xfer_len : 19; + /** Number of bytes transferred. */ + unsigned xfer_count : 19; + /** Sent ZLP */ + unsigned sent_zlp : 1; + /** Total len for control transfer */ + unsigned total_len : 19; + + /** stall clear flag */ + unsigned stall_clear_flag : 1; + + /** @} */ +} dwc_ep_t; + +/* + * Reasons for halting a host channel. + */ +typedef enum dwc_otg_halt_status { + DWC_OTG_HC_XFER_NO_HALT_STATUS, + DWC_OTG_HC_XFER_COMPLETE, + DWC_OTG_HC_XFER_URB_COMPLETE, + DWC_OTG_HC_XFER_ACK, + DWC_OTG_HC_XFER_NAK, + DWC_OTG_HC_XFER_NYET, + DWC_OTG_HC_XFER_STALL, + DWC_OTG_HC_XFER_XACT_ERR, + DWC_OTG_HC_XFER_FRAME_OVERRUN, + DWC_OTG_HC_XFER_BABBLE_ERR, + DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, + DWC_OTG_HC_XFER_AHB_ERR, + DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, + DWC_OTG_HC_XFER_URB_DEQUEUE +} dwc_otg_halt_status_e; + +/** + * Host channel descriptor. This structure represents the state of a single + * host channel when acting in host mode. It contains the data items needed to + * transfer packets to an endpoint via a host channel. + */ +typedef struct dwc_hc { + /** Host channel number used for register address lookup */ + uint8_t hc_num; + + /** Device to access */ + unsigned dev_addr : 7; + + /** EP to access */ + unsigned ep_num : 4; + + /** EP direction. 0: OUT, 1: IN */ + unsigned ep_is_in : 1; + + /** + * EP speed. + * One of the following values: + * - DWC_OTG_EP_SPEED_LOW + * - DWC_OTG_EP_SPEED_FULL + * - DWC_OTG_EP_SPEED_HIGH + */ + unsigned speed : 2; +#define DWC_OTG_EP_SPEED_LOW 0 +#define DWC_OTG_EP_SPEED_FULL 1 +#define DWC_OTG_EP_SPEED_HIGH 2 + + /** + * Endpoint type. + * One of the following values: + * - DWC_OTG_EP_TYPE_CONTROL: 0 + * - DWC_OTG_EP_TYPE_ISOC: 1 + * - DWC_OTG_EP_TYPE_BULK: 2 + * - DWC_OTG_EP_TYPE_INTR: 3 + */ + unsigned ep_type : 2; + + /** Max packet size in bytes */ + unsigned max_packet : 11; + + /** + * PID for initial transaction. + * 0: DATA0,<br> + * 1: DATA2,<br> + * 2: DATA1,<br> + * 3: MDATA (non-Control EP), + * SETUP (Control EP) + */ + unsigned data_pid_start : 2; +#define DWC_OTG_HC_PID_DATA0 0 +#define DWC_OTG_HC_PID_DATA2 1 +#define DWC_OTG_HC_PID_DATA1 2 +#define DWC_OTG_HC_PID_MDATA 3 +#define DWC_OTG_HC_PID_SETUP 3 + + /** Number of periodic transactions per (micro)frame */ + unsigned multi_count: 2; + + /** @name Transfer State */ + /** @{ */ + + /** Pointer to the current transfer buffer position. */ + uint8_t *xfer_buff; + /** Total number of bytes to transfer. */ + uint32_t xfer_len; + /** Number of bytes transferred so far. */ + uint32_t xfer_count; + /** Packet count at start of transfer.*/ + uint16_t start_pkt_count; + + /** + * Flag to indicate whether the transfer has been started. Set to 1 if + * it has been started, 0 otherwise. + */ + uint8_t xfer_started; + + /** + * Set to 1 to indicate that a PING request should be issued on this + * channel. If 0, process normally. + */ + uint8_t do_ping; + + /** + * Set to 1 to indicate that the error count for this transaction is + * non-zero. Set to 0 if the error count is 0. + */ + uint8_t error_state; + + /** + * Set to 1 to indicate that this channel should be halted the next + * time a request is queued for the channel. This is necessary in + * slave mode if no request queue space is available when an attempt + * is made to halt the channel. + */ + uint8_t halt_on_queue; + + /** + * Set to 1 if the host channel has been halted, but the core is not + * finished flushing queued requests. Otherwise 0. + */ + uint8_t halt_pending; + + /** + * Reason for halting the host channel. + */ + dwc_otg_halt_status_e halt_status; + + /* + * Split settings for the host channel + */ + uint8_t do_split; /**< Enable split for the channel */ + uint8_t complete_split; /**< Enable complete split */ + uint8_t hub_addr; /**< Address of high speed hub */ + + uint8_t port_addr; /**< Port of the low/full speed device */ + /** Split transaction position + * One of the following values: + * - DWC_HCSPLIT_XACTPOS_MID + * - DWC_HCSPLIT_XACTPOS_BEGIN + * - DWC_HCSPLIT_XACTPOS_END + * - DWC_HCSPLIT_XACTPOS_ALL */ + uint8_t xact_pos; + + /** Set when the host channel does a short read. */ + uint8_t short_read; + + /** + * Number of requests issued for this channel since it was assigned to + * the current transfer (not counting PINGs). + */ + uint8_t requests; + + /** + * Queue Head for the transfer being processed by this channel. + */ + struct dwc_otg_qh *qh; + + /** @} */ + + /** Entry in list of host channels. */ + struct list_head hc_list_entry; +} dwc_hc_t; + +/** + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. + * Parameter values are passed to the CIL initialization function + * dwc_otg_cil_init. + */ + +typedef struct dwc_otg_core_params +{ + int32_t opt; +//#define dwc_param_opt_default 1 + /** + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ + int32_t otg_cap; +#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 +//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE + /** + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ + int32_t dma_enable; +//#define dwc_param_dma_enable_default 1 + /** The DMA Burst size (applicable only for External DMA + * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) + */ + int32_t dma_burst_size; /* Translate this to GAHBCFG values */ +//#define dwc_param_dma_burst_size_default 32 + /** + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ + int32_t speed; +//#define dwc_param_speed_default 0 +#define DWC_SPEED_PARAM_HIGH 0 +#define DWC_SPEED_PARAM_FULL 1 + + /** Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ + int32_t host_support_fs_ls_low_power; +//#define dwc_param_host_support_fs_ls_low_power_default 0 + /** Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ + int32_t host_ls_low_power_phy_clk; +//#define dwc_param_host_ls_low_power_phy_clk_default 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 + /** + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ + int32_t enable_dynamic_fifo; +//#define dwc_param_enable_dynamic_fifo_default 1 + /** Total number of 4-byte words in the data FIFO memory. This + * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic + * Tx FIFOs. + * 32 to 32768 (default 8192) + * Note: The total FIFO memory depth in the FPGA configuration is 8192. + */ + int32_t data_fifo_size; +//#define dwc_param_data_fifo_size_default 8192 + /** Number of 4-byte words in the Rx FIFO in device mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1064) + */ + int32_t dev_rx_fifo_size; +//#define dwc_param_dev_rx_fifo_size_default 1064 + /** Number of 4-byte words in the non-periodic Tx FIFO in device mode + * when dynamic FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t dev_nperio_tx_fifo_size; +//#define dwc_param_dev_nperio_tx_fifo_size_default 1024 + /** Number of 4-byte words in each of the periodic Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; +//#define dwc_param_dev_perio_tx_fifo_size_default 256 + /** Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_rx_fifo_size; +//#define dwc_param_host_rx_fifo_size_default 1024 + /** Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 1024) + */ + int32_t host_nperio_tx_fifo_size; +//#define dwc_param_host_nperio_tx_fifo_size_default 1024 + /** Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_perio_tx_fifo_size; +//#define dwc_param_host_perio_tx_fifo_size_default 1024 + /** The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ + int32_t max_transfer_size; +//#define dwc_param_max_transfer_size_default 65535 + /** The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ + int32_t max_packet_count; +//#define dwc_param_max_packet_count_default 511 + /** The number of host channel registers to use. + * 1 to 16 (default 12) + * Note: The FPGA configuration supports a maximum of 12 host channels. + */ + int32_t host_channels; +//#define dwc_param_host_channels_default 12 + /** The number of endpoints in addition to EP0 available for device + * mode operations. + * 1 to 15 (default 6 IN and OUT) + * Note: The FPGA configuration supports a maximum of 6 IN and OUT + * endpoints in addition to EP0. + */ + int32_t dev_endpoints; +//#define dwc_param_dev_endpoints_default 6 + /** + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ + int32_t phy_type; +#define DWC_PHY_TYPE_PARAM_FS 0 +#define DWC_PHY_TYPE_PARAM_UTMI 1 +#define DWC_PHY_TYPE_PARAM_ULPI 2 +//#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI + /** + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ + int32_t phy_utmi_width; +//#define dwc_param_phy_utmi_width_default 16 + /** + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ + int32_t phy_ulpi_ddr; +//#define dwc_param_phy_ulpi_ddr_default 0 + /** + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ + int32_t phy_ulpi_ext_vbus; +#define DWC_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 +//#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS + /** + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ + int32_t i2c_enable; +//#define dwc_param_i2c_enable_default 0 + + int32_t ulpi_fs_ls; +//#define dwc_param_ulpi_fs_ls_default 0 + + int32_t ts_dline; +//#define dwc_param_ts_dline_default 0 + + /** + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ + int32_t en_multiple_tx_fifo; +#define dwc_param_en_multiple_tx_fifo_default 1 + + /** Number of 4-byte words in each of the Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; +#define dwc_param_dev_tx_fifo_size_default 256 + + /** Thresholding enable flag- + * bit 0 - enable non-ISO Tx thresholding + * bit 1 - enable ISO Tx thresholding + * bit 2 - enable Rx thresholding + */ + uint32_t thr_ctl; +#define dwc_param_thr_ctl_default 0 + + /** Thresholding length for Tx + * FIFOs in 32 bit DWORDs + */ + uint32_t tx_thr_length; +#define dwc_param_tx_thr_length_default 64 + + /** Thresholding length for Rx + * FIFOs in 32 bit DWORDs + */ + uint32_t rx_thr_length; +#define dwc_param_rx_thr_length_default 64 +} dwc_otg_core_params_t; + +#ifdef DEBUG +struct dwc_otg_core_if; +typedef struct hc_xfer_info +{ + struct dwc_otg_core_if *core_if; + dwc_hc_t *hc; +} hc_xfer_info_t; +#endif + +/** + * The <code>dwc_otg_core_if</code> structure contains information needed to manage + * the DWC_otg controller acting in either host or device mode. It + * represents the programming view of the controller as a whole. + */ +typedef struct dwc_otg_core_if +{ + /** Parameters that define how the core should be configured.*/ + dwc_otg_core_params_t *core_params; + + /** Core Global registers starting at offset 000h. */ + dwc_otg_core_global_regs_t *core_global_regs; + + /** Device-specific information */ + dwc_otg_dev_if_t *dev_if; + /** Host-specific information */ + dwc_otg_host_if_t *host_if; + + /* + * Set to 1 if the core PHY interface bits in USBCFG have been + * initialized. + */ + uint8_t phy_init_done; + + /* + * SRP Success flag, set by srp success interrupt in FS I2C mode + */ + uint8_t srp_success; + uint8_t srp_timer_started; + + /* Common configuration information */ + /** Power and Clock Gating Control Register */ + volatile uint32_t *pcgcctl; +#define DWC_OTG_PCGCCTL_OFFSET 0xE00 + + /** Push/pop addresses for endpoints or host channels.*/ + uint32_t *data_fifo[MAX_EPS_CHANNELS]; +#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 +#define DWC_OTG_DATA_FIFO_SIZE 0x1000 + + /** Total RAM for FIFOs (Bytes) */ + uint16_t total_fifo_size; + /** Size of Rx FIFO (Bytes) */ + uint16_t rx_fifo_size; + /** Size of Non-periodic Tx FIFO (Bytes) */ + uint16_t nperio_tx_fifo_size; + + /** 1 if DMA is enabled, 0 otherwise. */ + uint8_t dma_enable; + + /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ + uint8_t en_multiple_tx_fifo; + + /** Set to 1 if multiple packets of a high-bandwidth transfer is in + * process of being queued */ + uint8_t queuing_high_bandwidth; + + /** Hardware Configuration -- stored here for convenience.*/ + hwcfg1_data_t hwcfg1; + hwcfg2_data_t hwcfg2; + hwcfg3_data_t hwcfg3; + hwcfg4_data_t hwcfg4; + + /** The operational State, during transations + * (a_host>>a_peripherial and b_device=>b_host) this may not + * match the core but allows the software to determine + * transitions. + */ + uint8_t op_state; + + /** + * Set to 1 if the HCD needs to be restarted on a session request + * interrupt. This is required if no connector ID status change has + * occurred since the HCD was last disconnected. + */ + uint8_t restart_hcd_on_session_req; + + /** HCD callbacks */ + /** A-Device is a_host */ +#define A_HOST (1) + /** A-Device is a_suspend */ +#define A_SUSPEND (2) + /** A-Device is a_peripherial */ +#define A_PERIPHERAL (3) + /** B-Device is operating as a Peripheral. */ +#define B_PERIPHERAL (4) + /** B-Device is operating as a Host. */ +#define B_HOST (5) + + /** HCD callbacks */ + struct dwc_otg_cil_callbacks *hcd_cb; + /** PCD callbacks */ + struct dwc_otg_cil_callbacks *pcd_cb; + + /** Device mode Periodic Tx FIFO Mask */ + uint32_t p_tx_msk; + /** Device mode Periodic Tx FIFO Mask */ + uint32_t tx_msk; + +#ifdef DEBUG + uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; + + hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; + struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS]; + +#if 1 // winder + uint32_t hfnum_7_samples; + uint32_t hfnum_7_frrem_accum; + uint32_t hfnum_0_samples; + uint32_t hfnum_0_frrem_accum; + uint32_t hfnum_other_samples; + uint32_t hfnum_other_frrem_accum; +#else + uint32_t hfnum_7_samples; + uint64_t hfnum_7_frrem_accum; + uint32_t hfnum_0_samples; + uint64_t hfnum_0_frrem_accum; + uint32_t hfnum_other_samples; + uint64_t hfnum_other_frrem_accum; +#endif + resource_size_t phys_addr; /* Added to support PLB DMA : phys-virt mapping */ +#endif + +} dwc_otg_core_if_t; + +/* + * The following functions support initialization of the CIL driver component + * and the DWC_otg controller. + */ +extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr, + dwc_otg_core_params_t *_core_params); +extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if ); +extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if ); + +/** @name Device CIL Functions + * The following functions support managing the DWC_otg controller in device + * mode. + */ +/**@{*/ +extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest); +extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma); +extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if); +/**@}*/ + +/** @name Host CIL Functions + * The following functions support managing the DWC_otg controller in host + * mode. + */ +/**@{*/ +extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if, + dwc_hc_t *_hc, + dwc_otg_halt_status_e _halt_status); +extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if); + +/** + * This function Reads HPRT0 in preparation to modify. It keeps the + * WC bits 0 so that if they are read as 1, they won't clear when you + * write it back + */ +static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0); + hprt0.b.prtena = 0; + hprt0.b.prtconndet = 0; + hprt0.b.prtenchng = 0; + hprt0.b.prtovrcurrchng = 0; + return hprt0.d32; +} + +extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if); +/**@}*/ + +/** @name Common CIL Functions + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +/**@{*/ + +extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if, + uint8_t *dest, + uint16_t bytes); + +extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if); + +extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, + const int _num ); +extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ); +extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if ); + +#define NP_TXFIFO_EMPTY -1 +#define MAX_NP_TXREQUEST_Q_SLOTS 8 +/** + * This function returns the endpoint number of the request at + * the top of non-periodic TX FIFO, or -1 if the request FIFO is + * empty. + */ +static inline int dwc_otg_top_nptxfifo_epnum(dwc_otg_core_if_t *_core_if) { + gnptxsts_data_t txstatus = {.d32 = 0}; + + txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts); + return (txstatus.b.nptxqspcavail == MAX_NP_TXREQUEST_Q_SLOTS ? + -1 : txstatus.b.nptxqtop_chnep); +} +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) { + return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) & + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); +} + +/** + * This function returns the OTG Interrupt register. + */ +static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) { + return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint)); +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the IN endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *_core_if) { + uint32_t v; + v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) & + dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk); + return (v & 0xffff); + +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the OUT endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *_core_if) { + uint32_t v; + v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) & + dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk); + return ((v & 0xffff0000) >> 16); +} + +/** + * This function returns the Device IN EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *_core_if, + dwc_ep_t *_ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + uint32_t v, msk, emp; + msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk); + emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> _ep->num) & 0x1) << 7; + v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & msk; +/* + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + uint32_t v; + v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & + dwc_read_reg32(&dev_if->dev_global_regs->diepmsk); +*/ + return v; +} +/** + * This function returns the Device OUT EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if, + dwc_ep_t *_ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + uint32_t v; + v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & + dwc_read_reg32(&dev_if->dev_global_regs->doepmsk); + return v; +} + +/** + * This function returns the Host All Channel Interrupt register + */ +static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint)); +} + +static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); +} + + +/** + * This function returns the mode of the operation, host or device. + * + * @return 0 - Device Mode, 1 - Host Mode + */ +static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) { + return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1); +} + +static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); +} +static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); +} + +extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if ); + + +/**@}*/ + +/** + * DWC_otg CIL callback structure. This structure allows the HCD and + * PCD to register functions used for starting and stopping the PCD + * and HCD for role change on for a DRD. + */ +typedef struct dwc_otg_cil_callbacks +{ + /** Start function for role change */ + int (*start) (void *_p); + /** Stop Function for role change */ + int (*stop) (void *_p); + /** Disconnect Function for role change */ + int (*disconnect) (void *_p); + /** Resume/Remote wakeup Function */ + int (*resume_wakeup) (void *_p); + /** Suspend function */ + int (*suspend) (void *_p); + /** Session Start (SRP) */ + int (*session_start) (void *_p); + /** Pointer passed to start() and stop() */ + void *p; +} dwc_otg_cil_callbacks_t; + + + +extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p); +extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p); + + +#endif diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h new file mode 100644 index 0000000000..b0298ec2ea --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h @@ -0,0 +1,58 @@ +/****************************************************************************** +** +** FILE NAME : dwc_otg_cil_ifx.h +** PROJECT : Twinpass/Danube +** MODULES : DWC OTG USB +** +** DATE : 07 Sep. 2007 +** AUTHOR : Sung Winder +** DESCRIPTION : Default param value. +** COPYRIGHT : Copyright (c) 2007 +** Infineon Technologies AG +** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park, +** Hsin-chu City, 300 Taiwan. +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Date $Author $Comment +** 12 April 2007 Sung Winder Initiate Version +*******************************************************************************/ +#if !defined(__DWC_OTG_CIL_IFX_H__) +#define __DWC_OTG_CIL_IFX_H__ + +/* ================ Default param value ================== */ +#define dwc_param_opt_default 1 +#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE +#define dwc_param_dma_enable_default 1 +#define dwc_param_dma_burst_size_default 32 +#define dwc_param_speed_default DWC_SPEED_PARAM_HIGH +#define dwc_param_host_support_fs_ls_low_power_default 0 +#define dwc_param_host_ls_low_power_phy_clk_default DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ +#define dwc_param_enable_dynamic_fifo_default 1 +#define dwc_param_data_fifo_size_default 2048 +#define dwc_param_dev_rx_fifo_size_default 1024 +#define dwc_param_dev_nperio_tx_fifo_size_default 1024 +#define dwc_param_dev_perio_tx_fifo_size_default 768 +#define dwc_param_host_rx_fifo_size_default 640 +#define dwc_param_host_nperio_tx_fifo_size_default 640 +#define dwc_param_host_perio_tx_fifo_size_default 768 +#define dwc_param_max_transfer_size_default 65535 +#define dwc_param_max_packet_count_default 511 +#define dwc_param_host_channels_default 16 +#define dwc_param_dev_endpoints_default 6 +#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI +#define dwc_param_phy_utmi_width_default 16 +#define dwc_param_phy_ulpi_ddr_default 0 +#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS +#define dwc_param_i2c_enable_default 0 +#define dwc_param_ulpi_fs_ls_default 0 +#define dwc_param_ts_dline_default 0 + +/* ======================================================= */ + +#endif // __DWC_OTG_CIL_IFX_H__ + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil_intr.c new file mode 100644 index 0000000000..d469ab46b0 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_cil_intr.c @@ -0,0 +1,708 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 553126 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * This file contains the Common Interrupt handlers. + */ +#include "dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" + +#ifdef DEBUG +inline const char *op_state_str( dwc_otg_core_if_t *_core_if ) +{ + return (_core_if->op_state==A_HOST?"a_host": + (_core_if->op_state==A_SUSPEND?"a_suspend": + (_core_if->op_state==A_PERIPHERAL?"a_peripheral": + (_core_if->op_state==B_PERIPHERAL?"b_peripheral": + (_core_if->op_state==B_HOST?"b_host": + "unknown"))))); +} +#endif + +/** This function will log a debug message + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if) +{ + gintsts_data_t gintsts; + DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", + dwc_otg_mode(_core_if) ? "Host" : "Device"); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.modemismatch = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/** Start the HCD. Helper function for using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_start( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->start) { + _core_if->hcd_cb->start( _core_if->hcd_cb->p ); + } +} +/** Stop the HCD. Helper function for using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_stop( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->stop) { + _core_if->hcd_cb->stop( _core_if->hcd_cb->p ); + } +} +/** Disconnect the HCD. Helper function for using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) { + _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p ); + } +} +/** Inform the HCD the a New Session has begun. Helper function for + * using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_session_start( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) { + _core_if->hcd_cb->session_start( _core_if->hcd_cb->p ); + } +} + +/** Start the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_start( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->start ) { + _core_if->pcd_cb->start( _core_if->pcd_cb->p ); + } +} +/** Stop the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_stop( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) { + _core_if->pcd_cb->stop( _core_if->pcd_cb->p ); + } +} +/** Suspend the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_suspend( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) { + _core_if->pcd_cb->suspend( _core_if->pcd_cb->p ); + } +} +/** Resume the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_resume( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) { + _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p ); + } +} + +/** + * This function handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has + * occurred. + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + _core_if->core_global_regs; + gotgint_data_t gotgint; + gotgctl_data_t gotgctl; + gintmsk_data_t gintmsk; + + gotgint.d32 = dwc_read_reg32( &global_regs->gotgint); + gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl); + DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, + op_state_str(_core_if)); + //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 ); + + if (gotgint.b.sesenddet) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Session End Detected++ (%s)\n", + op_state_str(_core_if)); + gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl); + + if (_core_if->op_state == B_HOST) { + pcd_start( _core_if ); + _core_if->op_state = B_PERIPHERAL; + } else { + /* If not B_HOST and Device HNP still set. HNP + * Did not succeed!*/ + if (gotgctl.b.devhnpen) { + DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); + DWC_ERROR( "Device Not Connected/Responding!\n" ); + } + + /* If Session End Detected the B-Cable has + * been disconnected. */ + /* Reset PCD and Gadget driver to a + * clean state. */ + pcd_stop(_core_if); + } + gotgctl.d32 = 0; + gotgctl.b.devhnpen = 1; + dwc_modify_reg32( &global_regs->gotgctl, + gotgctl.d32, 0); + } + if (gotgint.b.sesreqsucstschng) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Session Reqeust Success Status Change++\n"); + gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl); + if (gotgctl.b.sesreqscs) { + if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && + (_core_if->core_params->i2c_enable)) { + _core_if->srp_success = 1; + } + else { + pcd_resume( _core_if ); + /* Clear Session Request */ + gotgctl.d32 = 0; + gotgctl.b.sesreq = 1; + dwc_modify_reg32( &global_regs->gotgctl, + gotgctl.d32, 0); + } + } + } + if (gotgint.b.hstnegsucstschng) { + /* Print statements during the HNP interrupt handling + * can cause it to fail.*/ + gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); + if (gotgctl.b.hstnegscs) { + if (dwc_otg_is_host_mode(_core_if) ) { + _core_if->op_state = B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the + * interrupt if host mode is already set. The + * HCD interrupt handler won't get called if + * the HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk.d32 = 0; + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, + gintmsk.d32, 0); + pcd_stop(_core_if); + /* + * Initialize the Core for Host mode. + */ + hcd_start( _core_if ); + _core_if->op_state = B_HOST; + } + } else { + gotgctl.d32 = 0; + gotgctl.b.hnpreq = 1; + gotgctl.b.devhnpen = 1; + dwc_modify_reg32( &global_regs->gotgctl, + gotgctl.d32, 0); + DWC_DEBUGPL( DBG_ANY, "HNP Failed\n"); + DWC_ERROR( "Device Not Connected/Responding\n" ); + } + } + if (gotgint.b.hstnegdet) { + /* The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode + * switch all interrupts are cleared so the disconnect + * interrupt handler will not get executed. + */ + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Host Negotiation Detected++ (%s)\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Device")); + if (dwc_otg_is_device_mode(_core_if)){ + DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state); + hcd_disconnect( _core_if ); + pcd_start( _core_if ); + _core_if->op_state = A_PERIPHERAL; + } else { + /* + * Need to disable SOF interrupt immediately. When + * switching from device to host, the PCD interrupt + * handler won't handle the interrupt if host mode is + * already set. The HCD interrupt handler won't get + * called if the HCD state is HALT. This means that + * the interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk.d32 = 0; + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, + gintmsk.d32, 0); + pcd_stop( _core_if ); + hcd_start( _core_if ); + _core_if->op_state = A_HOST; + } + } + if (gotgint.b.adevtoutchng) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "A-Device Timeout Change++\n"); + } + if (gotgint.b.debdone) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Debounce Done++\n"); + } + + /* Clear GOTGINT */ + dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32); + + return 1; +} + +/** + * This function handles the Connector ID Status Change Interrupt. It + * reads the OTG Interrupt Register (GOTCTL) to determine whether this + * is a Device to Host Mode transition or a Host Mode to Device + * Transition. + * + * This only occurs when the cable is connected/removed from the PHY + * connector. + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if) +{ + uint32_t count = 0; + + gintsts_data_t gintsts = { .d32 = 0 }; + gintmsk_data_t gintmsk = { .d32 = 0 }; + gotgctl_data_t gotgctl = { .d32 = 0 }; + + /* + * Need to disable SOF interrupt immediately. If switching from device + * to host, the PCD interrupt handler won't handle the interrupt if + * host mode is already set. The HCD interrupt handler won't get + * called if the HCD state is HALT. This means that the interrupt does + * not get handled and Linux complains loudly. + */ + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0); + + DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Device")); + gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl); + DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); + DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); + + /* B-Device connector (Device Mode) */ + if (gotgctl.b.conidsts) { + /* Wait for switch to device mode. */ + while (!dwc_otg_is_device_mode(_core_if) ){ + DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral")); + MDELAY(100); + if (++count > 10000) *(uint32_t*)NULL=0; + } + _core_if->op_state = B_PERIPHERAL; + dwc_otg_core_init(_core_if); + dwc_otg_enable_global_interrupts(_core_if); + pcd_start( _core_if ); + } else { + /* A-Device connector (Host Mode) */ + while (!dwc_otg_is_host_mode(_core_if) ) { + DWC_PRINT("Waiting for Host Mode, Mode=%s\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral")); + MDELAY(100); + if (++count > 10000) *(uint32_t*)NULL=0; + } + _core_if->op_state = A_HOST; + /* + * Initialize the Core for Host mode. + */ + dwc_otg_core_init(_core_if); + dwc_otg_enable_global_interrupts(_core_if); + hcd_start( _core_if ); + } + + /* Set flag and clear interrupt */ + gintsts.b.conidstschng = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that a device is initiating the Session + * Request Protocol to request the host to turn on bus power so a new + * session can begin. The handler responds by turning on bus power. If + * the DWC_otg controller is in low power mode, the handler brings the + * controller out of low power mode before turning on bus power. + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if ) +{ +#ifndef DWC_HOST_ONLY // winder + hprt0_data_t hprt0; +#endif + gintsts_data_t gintsts; + +#ifndef DWC_HOST_ONLY + DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); + + if (dwc_otg_is_device_mode(_core_if) ) { + DWC_PRINT("SRP: Device mode\n"); + } else { + DWC_PRINT("SRP: Host mode\n"); + + /* Turn on the port power bit. */ + hprt0.d32 = dwc_otg_read_hprt0( _core_if ); + hprt0.b.prtpwr = 1; + dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32); + + /* Start the Connection timer. So a message can be displayed + * if connect does not occur within 10 seconds. */ + hcd_session_start( _core_if ); + } +#endif + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.sessreqintr = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume + * signaling. The handler schedules a time to stop resume signaling. + */ +int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if ) +{ + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n"); + + if (dwc_otg_is_device_mode(_core_if) ) { + dctl_data_t dctl = {.d32=0}; + DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", + dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts)); +#ifdef PARTIAL_POWER_DOWN + if (_core_if->hwcfg4.b.power_optimiz) { + pcgcctl_data_t power = {.d32=0}; + + power.d32 = dwc_read_reg32( _core_if->pcgcctl ); + DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32); + + power.b.stoppclk = 0; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + + power.b.pwrclmp = 0; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + + power.b.rstpdwnmodule = 0; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + } +#endif + /* Clear the Remote Wakeup Signalling */ + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl, + dctl.d32, 0 ); + + if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) { + _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p ); + } + + } else { + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs). + */ + hprt0_data_t hprt0 = {.d32=0}; + pcgcctl_data_t pcgcctl = {.d32=0}; + /* Restart the Phy Clock */ + pcgcctl.b.stoppclk = 1; + dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0); + UDELAY(10); + + /* Now wait for 70 ms. */ + hprt0.d32 = dwc_otg_read_hprt0( _core_if ); + DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32); + MDELAY(70); + hprt0.b.prtres = 0; /* Resume */ + dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32); + DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0)); + } + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.wkupintr = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that a device has been disconnected from + * the root port. + */ +int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if) +{ + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Device"), + op_state_str(_core_if)); + +/** @todo Consolidate this if statement. */ +#ifndef DWC_HOST_ONLY + if (_core_if->op_state == B_HOST) { + /* If in device mode Disconnect and stop the HCD, then + * start the PCD. */ + hcd_disconnect( _core_if ); + pcd_start( _core_if ); + _core_if->op_state = B_PERIPHERAL; + } else if (dwc_otg_is_device_mode(_core_if)) { + gotgctl_data_t gotgctl = { .d32 = 0 }; + gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl); + if (gotgctl.b.hstsethnpen==1) { + /* Do nothing, if HNP in process the OTG + * interrupt "Host Negotiation Detected" + * interrupt will do the mode switch. + */ + } else if (gotgctl.b.devhnpen == 0) { + /* If in device mode Disconnect and stop the HCD, then + * start the PCD. */ + hcd_disconnect( _core_if ); + pcd_start( _core_if ); + _core_if->op_state = B_PERIPHERAL; + } else { + DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n"); + } + } else { + if (_core_if->op_state == A_HOST) { + /* A-Cable still connected but device disconnected. */ + hcd_disconnect( _core_if ); + } + } +#endif +/* Without OTG, we should use the disconnect function!? winder added.*/ +#if 1 // NO OTG, so host only!! + hcd_disconnect( _core_if ); +#endif + + gintsts.d32 = 0; + gintsts.b.disconnect = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} +/** + * This interrupt indicates that SUSPEND state has been detected on + * the USB. + * + * For HNP the USB Suspend interrupt signals the change from + * "a_peripheral" to "a_host". + * + * When power management is enabled the core will be put in low power + * mode. + */ +int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if ) +{ + dsts_data_t dsts; + gintsts_data_t gintsts; + + //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n"); + + if (dwc_otg_is_device_mode( _core_if ) ) { + /* Check the Device status register to determine if the Suspend + * state is active. */ + dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts); + DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); + DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " + "HWCFG4.power Optimize=%d\n", + dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz); + + +#ifdef PARTIAL_POWER_DOWN +/** @todo Add a module parameter for power management. */ + + if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) { + pcgcctl_data_t power = {.d32=0}; + DWC_DEBUGPL(DBG_CIL, "suspend\n"); + + power.b.pwrclmp = 1; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + + power.b.rstpdwnmodule = 1; + dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32); + + power.b.stoppclk = 1; + dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32); + + } else { + DWC_DEBUGPL(DBG_ANY,"disconnect?\n"); + } +#endif + /* PCD callback for suspend. */ + pcd_suspend(_core_if); + } else { + if (_core_if->op_state == A_PERIPHERAL) { + DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n"); + /* Clear the a_peripheral flag, back to a_host. */ + pcd_stop( _core_if ); + hcd_start( _core_if ); + _core_if->op_state = A_HOST; + } + } + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.usbsuspend = 1; + dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + + +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if) +{ + gintsts_data_t gintsts; + gintmsk_data_t gintmsk; + gintmsk_data_t gintmsk_common = {.d32=0}; + gintmsk_common.b.wkupintr = 1; + gintmsk_common.b.sessreqintr = 1; + gintmsk_common.b.conidstschng = 1; + gintmsk_common.b.otgintr = 1; + gintmsk_common.b.modemismatch = 1; + gintmsk_common.b.disconnect = 1; + gintmsk_common.b.usbsuspend = 1; + /** @todo: The port interrupt occurs while in device + * mode. Added code to CIL to clear the interrupt for now! + */ + gintmsk_common.b.portintr = 1; + + gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts); + gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk); +#ifdef DEBUG + /* if any common interrupts set */ + if (gintsts.d32 & gintmsk_common.d32) { + DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n", + gintsts.d32, gintmsk.d32); + } +#endif + + return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32); + +} + +/** + * Common interrupt handler. + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - Disconnect Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Session Request Interrupt. + * - Resume / Remote Wakeup Detected Interrupt. + * + */ +extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if ) +{ + int retval = 0; + gintsts_data_t gintsts; + + gintsts.d32 = dwc_otg_read_common_intr(_core_if); + + if (gintsts.b.modemismatch) { + retval |= dwc_otg_handle_mode_mismatch_intr( _core_if ); + } + if (gintsts.b.otgintr) { + retval |= dwc_otg_handle_otg_intr( _core_if ); + } + if (gintsts.b.conidstschng) { + retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if ); + } + if (gintsts.b.disconnect) { + retval |= dwc_otg_handle_disconnect_intr( _core_if ); + } + if (gintsts.b.sessreqintr) { + retval |= dwc_otg_handle_session_req_intr( _core_if ); + } + if (gintsts.b.wkupintr) { + retval |= dwc_otg_handle_wakeup_detected_intr( _core_if ); + } + if (gintsts.b.usbsuspend) { + retval |= dwc_otg_handle_usb_suspend_intr( _core_if ); + } + if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) { + /* The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable. + */ + gintsts.d32 = 0; + gintsts.b.portintr = 1; + dwc_write_reg32(&_core_if->core_global_regs->gintsts, + gintsts.d32); + retval |= 1; + + } + return retval; +} diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_driver.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_driver.c new file mode 100644 index 0000000000..5c64ebbe0d --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_driver.c @@ -0,0 +1,1277 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 631780 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * The dwc_otg_driver module provides the initialization and cleanup entry + * points for the DWC_otg driver. This module will be dynamically installed + * after Linux is booted using the insmod command. When the module is + * installed, the dwc_otg_init function is called. When the module is + * removed (using rmmod), the dwc_otg_cleanup function is called. + * + * This module also defines a data structure for the dwc_otg_driver, which is + * used in conjunction with the standard ARM lm_device structure. These + * structures allow the OTG driver to comply with the standard Linux driver + * model in which devices and drivers are registered with a bus driver. This + * has the benefit that Linux can expose attributes of the driver and device + * in its special sysfs file system. Users can then read or write files in + * this file system to perform diagnostics on the driver components or the + * device. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <linux/device.h> +#include <linux/platform_device.h> + +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/stat.h> /* permission constants */ +#include <linux/irq.h> +#include <asm/io.h> + +#include "dwc_otg_plat.h" +#include "dwc_otg_attr.h" +#include "dwc_otg_driver.h" +#include "dwc_otg_cil.h" +#include "dwc_otg_cil_ifx.h" + +// #include "dwc_otg_pcd.h" // device +#include "dwc_otg_hcd.h" // host + +#include "dwc_otg_ifx.h" // for Infineon platform specific. + +#define DWC_DRIVER_VERSION "2.60a 22-NOV-2006" +#define DWC_DRIVER_DESC "HS OTG USB Controller driver" + +const char dwc_driver_name[] = "dwc_otg"; + +static unsigned long dwc_iomem_base = IFX_USB_IOMEM_BASE; +int dwc_irq = LTQ_USB_INT; +//int dwc_irq = 54; +//int dwc_irq = IFXMIPS_USB_OC_INT; + +extern int ifx_usb_hc_init(unsigned long base_addr, int irq); +extern void ifx_usb_hc_remove(void); + +/*-------------------------------------------------------------------------*/ +/* Encapsulate the module parameter settings */ + +static dwc_otg_core_params_t dwc_otg_module_params = { + .opt = -1, + .otg_cap = -1, + .dma_enable = -1, + .dma_burst_size = -1, + .speed = -1, + .host_support_fs_ls_low_power = -1, + .host_ls_low_power_phy_clk = -1, + .enable_dynamic_fifo = -1, + .data_fifo_size = -1, + .dev_rx_fifo_size = -1, + .dev_nperio_tx_fifo_size = -1, + .dev_perio_tx_fifo_size = /* dev_perio_tx_fifo_size_1 */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 15 */ + .host_rx_fifo_size = -1, + .host_nperio_tx_fifo_size = -1, + .host_perio_tx_fifo_size = -1, + .max_transfer_size = -1, + .max_packet_count = -1, + .host_channels = -1, + .dev_endpoints = -1, + .phy_type = -1, + .phy_utmi_width = -1, + .phy_ulpi_ddr = -1, + .phy_ulpi_ext_vbus = -1, + .i2c_enable = -1, + .ulpi_fs_ls = -1, + .ts_dline = -1, + .en_multiple_tx_fifo = -1, + .dev_tx_fifo_size = { /* dev_tx_fifo_size */ + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 + }, /* 15 */ + .thr_ctl = -1, + .tx_thr_length = -1, + .rx_thr_length = -1, +}; + +/** + * This function shows the Driver Version. + */ +static ssize_t version_show(struct device_driver *dev, char *buf) +{ + return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2,"%s\n", + DWC_DRIVER_VERSION); +} +static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); + +/** + * Global Debug Level Mask. + */ +uint32_t g_dbg_lvl = 0xff; /* OFF */ + +/** + * This function shows the driver Debug Level. + */ +static ssize_t dbg_level_show(struct device_driver *_drv, char *_buf) +{ + return sprintf(_buf, "0x%0x\n", g_dbg_lvl); +} +/** + * This function stores the driver Debug Level. + */ +static ssize_t dbg_level_store(struct device_driver *_drv, const char *_buf, + size_t _count) +{ + g_dbg_lvl = simple_strtoul(_buf, NULL, 16); + return _count; +} +static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store); + +/** + * This function is called during module intialization to verify that + * the module parameters are in a valid state. + */ +static int check_parameters(dwc_otg_core_if_t *core_if) +{ + int i; + int retval = 0; + +/* Checks if the parameter is outside of its valid range of values */ +#define DWC_OTG_PARAM_TEST(_param_,_low_,_high_) \ + ((dwc_otg_module_params._param_ < (_low_)) || \ + (dwc_otg_module_params._param_ > (_high_))) + +/* If the parameter has been set by the user, check that the parameter value is + * within the value range of values. If not, report a module error. */ +#define DWC_OTG_PARAM_ERR(_param_,_low_,_high_,_string_) \ + do { \ + if (dwc_otg_module_params._param_ != -1) { \ + if (DWC_OTG_PARAM_TEST(_param_,(_low_),(_high_))) { \ + DWC_ERROR("`%d' invalid for parameter `%s'\n", \ + dwc_otg_module_params._param_, _string_); \ + dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ + retval ++; \ + } \ + } \ + } while (0) + + DWC_OTG_PARAM_ERR(opt,0,1,"opt"); + DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap"); + DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable"); + DWC_OTG_PARAM_ERR(speed,0,1,"speed"); + DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power"); + DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk"); + DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo"); + DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size"); + DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size"); + DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size"); + DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size"); + DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size"); + DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size"); + DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size"); + DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count"); + DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels"); + DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints"); + DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type"); + DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr"); + DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus"); + DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable"); + DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls"); + DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline"); + + if (dwc_otg_module_params.dma_burst_size != -1) { + if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) && + DWC_OTG_PARAM_TEST(dma_burst_size,4,4) && + DWC_OTG_PARAM_TEST(dma_burst_size,8,8) && + DWC_OTG_PARAM_TEST(dma_burst_size,16,16) && + DWC_OTG_PARAM_TEST(dma_burst_size,32,32) && + DWC_OTG_PARAM_TEST(dma_burst_size,64,64) && + DWC_OTG_PARAM_TEST(dma_burst_size,128,128) && + DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) + { + DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n", + dwc_otg_module_params.dma_burst_size); + dwc_otg_module_params.dma_burst_size = 32; + retval ++; + } + } + + if (dwc_otg_module_params.phy_utmi_width != -1) { + if (DWC_OTG_PARAM_TEST(phy_utmi_width,8,8) && + DWC_OTG_PARAM_TEST(phy_utmi_width,16,16)) + { + DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n", + dwc_otg_module_params.phy_utmi_width); + //dwc_otg_module_params.phy_utmi_width = 16; + dwc_otg_module_params.phy_utmi_width = 8; + retval ++; + } + } + + for (i=0; i<15; i++) { + /** @todo should be like above */ + //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i],4,768,"dev_perio_tx_fifo_size"); + if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { + if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i],4,768)) { + DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", + dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i); + dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; + retval ++; + } + } + } + + DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo"); + for (i = 0; i < 15; i++) { + /** @todo should be like above */ + //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i],4,768,"dev_tx_fifo_size"); + if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { + if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) { + DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", + dwc_otg_module_params.dev_tx_fifo_size[i], + "dev_tx_fifo_size", i); + dwc_otg_module_params.dev_tx_fifo_size[i] = + dwc_param_dev_tx_fifo_size_default; + retval++; + } + } + } + DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl"); + DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length"); + DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length"); + + /* At this point, all module parameters that have been set by the user + * are valid, and those that have not are left unset. Now set their + * default values and/or check the parameters against the hardware + * configurations of the OTG core. */ + + + +/* This sets the parameter to the default value if it has not been set by the + * user */ +#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \ + ({ \ + int changed = 1; \ + if (dwc_otg_module_params._param_ == -1) { \ + changed = 0; \ + dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ + } \ + changed; \ + }) + +/* This checks the macro agains the hardware configuration to see if it is + * valid. It is possible that the default value could be invalid. In this + * case, it will report a module error if the user touched the parameter. + * Otherwise it will adjust the value without any error. */ +#define DWC_OTG_PARAM_CHECK_VALID(_param_,_str_,_is_valid_,_set_valid_) \ + ({ \ + int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \ + int error = 0; \ + if (!(_is_valid_)) { \ + if (changed) { \ + DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \ + error = 1; \ + } \ + dwc_otg_module_params._param_ = (_set_valid_); \ + } \ + error; \ + }) + + /* OTG Cap */ + retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap,"otg_cap", + ({ + int valid; + valid = 1; + switch (dwc_otg_module_params.otg_cap) { + case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: + if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) valid = 0; + break; + case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: + if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) && + (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) && + (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) && + (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) + { + valid = 0; + } + break; + case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: + /* always valid */ + break; + } + valid; + }), + (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) || + (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) || + (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || + (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? + DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE)); + + retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable,"dma_enable", + ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1, + 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(opt,"opt", + 1, + 0); + + DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power, + "host_support_fs_ls_low_power", + 1, 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo, + "enable_dynamic_fifo", + ((dwc_otg_module_params.enable_dynamic_fifo == 0) || + (core_if->hwcfg2.b.dynamic_fifo == 1)), 0); + + + retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size, + "data_fifo_size", + (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth), + core_if->hwcfg3.b.dfifo_depth); + + retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size, + "dev_rx_fifo_size", + (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), + dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); + + retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size, + "dev_nperio_tx_fifo_size", + (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), + (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size, + "host_rx_fifo_size", + (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), + dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); + + + retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size, + "host_nperio_tx_fifo_size", + (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), + (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size, + "host_perio_tx_fifo_size", + (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))), + ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))); + + retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size, + "max_transfer_size", + (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))), + ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1)); + + retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count, + "max_packet_count", + (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))), + ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_channels, + "host_channels", + (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)), + (core_if->hwcfg2.b.num_host_chan + 1)); + + retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints, + "dev_endpoints", + (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)), + core_if->hwcfg2.b.num_dev_ep); + +/* + * Define the following to disable the FS PHY Hardware checking. This is for + * internal testing only. + * + * #define NO_FS_PHY_HW_CHECKS + */ + +#ifdef NO_FS_PHY_HW_CHECKS + retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, + "phy_type", 1, 0); +#else + retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, + "phy_type", + ({ + int valid = 0; + if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) && + ((core_if->hwcfg2.b.hs_phy_type == 1) || + (core_if->hwcfg2.b.hs_phy_type == 3))) + { + valid = 1; + } + else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) && + ((core_if->hwcfg2.b.hs_phy_type == 2) || + (core_if->hwcfg2.b.hs_phy_type == 3))) + { + valid = 1; + } + else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) && + (core_if->hwcfg2.b.fs_phy_type == 1)) + { + valid = 1; + } + valid; + }), + ({ + int set = DWC_PHY_TYPE_PARAM_FS; + if (core_if->hwcfg2.b.hs_phy_type) { + if ((core_if->hwcfg2.b.hs_phy_type == 3) || + (core_if->hwcfg2.b.hs_phy_type == 1)) { + set = DWC_PHY_TYPE_PARAM_UTMI; + } + else { + set = DWC_PHY_TYPE_PARAM_ULPI; + } + } + set; + })); +#endif + + retval += DWC_OTG_PARAM_CHECK_VALID(speed,"speed", + (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1, + dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk, + "host_ls_low_power_phy_clk", + ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1), + ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)); + + DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr); + DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus); + DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width); + DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls); + DWC_OTG_PARAM_SET_DEFAULT(ts_dline); + +#ifdef NO_FS_PHY_HW_CHECKS + retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, + "i2c_enable", 1, 0); +#else + retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, + "i2c_enable", + (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1, + 0); +#endif + + for (i=0; i<16; i++) { + + int changed = 1; + int error = 0; + + if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) { + changed = 0; + dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; + } + if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { + if (changed) { + DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i); + error = 1; + } + dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); + } + retval += error; + } + + retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, + "en_multiple_tx_fifo", + ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && + (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, 0); + + for (i = 0; i < 16; i++) { + int changed = 1; + int error = 0; + if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) { + changed = 0; + dwc_otg_module_params.dev_tx_fifo_size[i] = + dwc_param_dev_tx_fifo_size_default; + } + if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= + (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { + if (changed) { + DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'." + "Check HW configuration.\n",dwc_otg_module_params.dev_tx_fifo_size[i],i); + error = 1; + } + dwc_otg_module_params.dev_tx_fifo_size[i] = + dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); + } + retval += error; + } + DWC_OTG_PARAM_SET_DEFAULT(thr_ctl); + DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length); + DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length); + return retval; +} // check_parameters + + +/** + * This function is the top level interrupt handler for the Common + * (Device and host modes) interrupts. + */ +static irqreturn_t dwc_otg_common_irq(int _irq, void *_dev) +{ + dwc_otg_device_t *otg_dev = _dev; + int32_t retval = IRQ_NONE; + + retval = dwc_otg_handle_common_intr( otg_dev->core_if ); + + mask_and_ack_ifx_irq (_irq); + + return IRQ_RETVAL(retval); +} + + +/** + * This function is called when a DWC_OTG device is unregistered with the + * dwc_otg_driver. This happens, for example, when the rmmod command is + * executed. The device may or may not be electrically present. If it is + * present, the driver stops device processing. Any resources used on behalf + * of this device are freed. + * + * @return + */ +static int +dwc_otg_driver_remove(struct platform_device *_dev) +{ + //dwc_otg_device_t *otg_dev = dev_get_drvdata(&_dev->dev); + dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); + + DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, _dev); + + if (otg_dev == NULL) { + /* Memory allocation for the dwc_otg_device failed. */ + return 0; + } + + /* + * Free the IRQ + */ + if (otg_dev->common_irq_installed) { + free_irq( otg_dev->irq, otg_dev ); + } + +#ifndef DWC_DEVICE_ONLY + if (otg_dev->hcd != NULL) { + dwc_otg_hcd_remove(&_dev->dev); + } +#endif + printk("after removehcd\n"); + +// Note: Integrate HOST and DEVICE(Gadget) is not planned yet. +#ifndef DWC_HOST_ONLY + if (otg_dev->pcd != NULL) { + dwc_otg_pcd_remove(otg_dev); + } +#endif + if (otg_dev->core_if != NULL) { + dwc_otg_cil_remove( otg_dev->core_if ); + } + printk("after removecil\n"); + + /* + * Remove the device attributes + */ + dwc_otg_attr_remove(&_dev->dev); + printk("after removeattr\n"); + + /* + * Return the memory. + */ + if (otg_dev->base != NULL) { + iounmap(otg_dev->base); + } + if (otg_dev->phys_addr != 0) { + release_mem_region(otg_dev->phys_addr, otg_dev->base_len); + } + kfree(otg_dev); + + /* + * Clear the drvdata pointer. + */ + //dev_set_drvdata(&_dev->dev, 0); + platform_set_drvdata(_dev, 0); + return 0; +} + +/** + * This function is called when an DWC_OTG device is bound to a + * dwc_otg_driver. It creates the driver components required to + * control the device (CIL, HCD, and PCD) and it initializes the + * device. The driver components are stored in a dwc_otg_device + * structure. A reference to the dwc_otg_device is saved in the + * lm_device. This allows the driver to access the dwc_otg_device + * structure on subsequent calls to driver methods for this device. + * + * @return + */ +static int __devinit +dwc_otg_driver_probe(struct platform_device *_dev) +{ + int retval = 0; + dwc_otg_device_t *dwc_otg_device; + int pin = (int)_dev->dev.platform_data; + int32_t snpsid; + struct resource *res; + gusbcfg_data_t usbcfg = {.d32 = 0}; + + // GPIOs + if(pin >= 0) + { + gpio_request(pin, "usb_power"); + gpio_direction_output(pin, 1); + gpio_set_value(pin, 1); + gpio_export(pin, 0); + } + dev_dbg(&_dev->dev, "dwc_otg_driver_probe (%p)\n", _dev); + + dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL); + if (dwc_otg_device == 0) { + dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); + retval = -ENOMEM; + goto fail; + } + memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); + dwc_otg_device->reg_offset = 0xFFFFFFFF; + + /* + * Retrieve the memory and IRQ resources. + */ + dwc_otg_device->irq = platform_get_irq(_dev, 0); + if (dwc_otg_device->irq == 0) { + dev_err(&_dev->dev, "no device irq\n"); + retval = -ENODEV; + goto fail; + } + dev_dbg(&_dev->dev, "OTG - device irq: %d\n", dwc_otg_device->irq); + res = platform_get_resource(_dev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&_dev->dev, "no CSR address\n"); + retval = -ENODEV; + goto fail; + } + dev_dbg(&_dev->dev, "OTG - ioresource_mem start0x%08x: end:0x%08x\n", + (unsigned)res->start, (unsigned)res->end); + dwc_otg_device->phys_addr = res->start; + dwc_otg_device->base_len = res->end - res->start + 1; + if (request_mem_region(dwc_otg_device->phys_addr, dwc_otg_device->base_len, + dwc_driver_name) == NULL) { + dev_err(&_dev->dev, "request_mem_region failed\n"); + retval = -EBUSY; + goto fail; + } + + /* + * Map the DWC_otg Core memory into virtual address space. + */ + dwc_otg_device->base = ioremap_nocache(dwc_otg_device->phys_addr, dwc_otg_device->base_len); + if (dwc_otg_device->base == NULL) { + dev_err(&_dev->dev, "ioremap() failed\n"); + retval = -ENOMEM; + goto fail; + } + dev_dbg(&_dev->dev, "mapped base=0x%08x\n", (unsigned)dwc_otg_device->base); + + /* + * Attempt to ensure this device is really a DWC_otg Controller. + * Read and verify the SNPSID register contents. The value should be + * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX". + */ + snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40)); + if ((snpsid & 0xFFFFF000) != 0x4F542000) { + dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid); + retval = -EINVAL; + goto fail; + } + + /* + * Initialize driver data to point to the global DWC_otg + * Device structure. + */ + platform_set_drvdata(_dev, dwc_otg_device); + dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); + dwc_otg_device->core_if = dwc_otg_cil_init( dwc_otg_device->base, &dwc_otg_module_params); + if (dwc_otg_device->core_if == 0) { + dev_err(&_dev->dev, "CIL initialization failed!\n"); + retval = -ENOMEM; + goto fail; + } + + /* + * Validate parameter values. + */ + if (check_parameters(dwc_otg_device->core_if) != 0) { + retval = -EINVAL; + goto fail; + } + + /* Added for PLB DMA phys virt mapping */ + //dwc_otg_device->core_if->phys_addr = dwc_otg_device->phys_addr; + /* + * Create Device Attributes in sysfs + */ + dwc_otg_attr_create (&_dev->dev); + + /* + * Disable the global interrupt until all the interrupt + * handlers are installed. + */ + dwc_otg_disable_global_interrupts( dwc_otg_device->core_if ); + /* + * Install the interrupt handler for the common interrupts before + * enabling common interrupts in core_init below. + */ + DWC_DEBUGPL( DBG_CIL, "registering (common) handler for irq%d\n", dwc_otg_device->irq); + + retval = request_irq((unsigned int)dwc_otg_device->irq, dwc_otg_common_irq, + //SA_INTERRUPT|SA_SHIRQ, "dwc_otg", (void *)dwc_otg_device ); + IRQF_SHARED, "dwc_otg", (void *)dwc_otg_device ); + //IRQF_DISABLED, "dwc_otg", (void *)dwc_otg_device ); + if (retval != 0) { + DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval); + retval = -EBUSY; + goto fail; + } else { + dwc_otg_device->common_irq_installed = 1; + } + + /* + * Initialize the DWC_otg core. + */ + dwc_otg_core_init( dwc_otg_device->core_if ); + + +#ifndef DWC_HOST_ONLY // otg device mode. (gadget.) + /* + * Initialize the PCD + */ + retval = dwc_otg_pcd_init(dwc_otg_device); + if (retval != 0) { + DWC_ERROR("dwc_otg_pcd_init failed\n"); + dwc_otg_device->pcd = NULL; + goto fail; + } +#endif // DWC_HOST_ONLY + +#ifndef DWC_DEVICE_ONLY // otg host mode. (HCD) + /* + * Initialize the HCD + */ +#if 1 /*fscz*/ + /* force_host_mode */ + usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg); + usbcfg.b.force_host_mode = 1; + dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32); +#endif + retval = dwc_otg_hcd_init(&_dev->dev, dwc_otg_device); + if (retval != 0) { + DWC_ERROR("dwc_otg_hcd_init failed\n"); + dwc_otg_device->hcd = NULL; + goto fail; + } +#endif // DWC_DEVICE_ONLY + + /* + * Enable the global interrupt after all the interrupt + * handlers are installed. + */ + dwc_otg_enable_global_interrupts( dwc_otg_device->core_if ); +#if 0 /*fscz*/ + usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg); + usbcfg.b.force_host_mode = 0; + dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32); +#endif + + + return 0; + +fail: + dwc_otg_driver_remove(_dev); + return retval; +} + +/** + * This structure defines the methods to be called by a bus driver + * during the lifecycle of a device on that bus. Both drivers and + * devices are registered with a bus driver. The bus driver matches + * devices to drivers based on information in the device and driver + * structures. + * + * The probe function is called when the bus driver matches a device + * to this driver. The remove function is called when a device is + * unregistered with the bus driver. + */ +struct platform_driver dwc_otg_driver = { + .probe = dwc_otg_driver_probe, + .remove = dwc_otg_driver_remove, +// .suspend = dwc_otg_driver_suspend, +// .resume = dwc_otg_driver_resume, + .driver = { + .name = dwc_driver_name, + .owner = THIS_MODULE, + }, +}; +EXPORT_SYMBOL(dwc_otg_driver); + +/** + * This function is called when the dwc_otg_driver is installed with the + * insmod command. It registers the dwc_otg_driver structure with the + * appropriate bus driver. This will cause the dwc_otg_driver_probe function + * to be called. In addition, the bus driver will automatically expose + * attributes defined for the device and driver in the special sysfs file + * system. + * + * @return + */ +static int __init dwc_otg_init(void) +{ + int retval = 0; + + printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION); + + if (ltq_is_ase()) + dwc_irq = LTQ_USB_ASE_INT; + + // ifxmips setup + retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq); + if (retval < 0) + { + printk(KERN_ERR "%s retval=%d\n", __func__, retval); + return retval; + } + dwc_otg_power_on(); // ifx only!! + + + retval = platform_driver_register(&dwc_otg_driver); + + if (retval < 0) { + printk(KERN_ERR "%s retval=%d\n", __func__, retval); + goto error1; + } + + retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version); + if (retval < 0) + { + printk(KERN_ERR "%s retval=%d\n", __func__, retval); + goto error2; + } + retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); + if (retval < 0) + { + printk(KERN_ERR "%s retval=%d\n", __func__, retval); + goto error3; + } + return retval; + + +error3: + driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); +error2: + driver_unregister(&dwc_otg_driver.driver); +error1: + ifx_usb_hc_remove(); + return retval; +} +module_init(dwc_otg_init); + +/** + * This function is called when the driver is removed from the kernel + * with the rmmod command. The driver unregisters itself with its bus + * driver. + * + */ +static void __exit dwc_otg_cleanup(void) +{ + printk(KERN_DEBUG "dwc_otg_cleanup()\n"); + + driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); + driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); + + platform_driver_unregister(&dwc_otg_driver); + ifx_usb_hc_remove(); + + printk(KERN_INFO "%s module removed\n", dwc_driver_name); +} +module_exit(dwc_otg_cleanup); + +MODULE_DESCRIPTION(DWC_DRIVER_DESC); +MODULE_AUTHOR("Synopsys Inc."); +MODULE_LICENSE("GPL"); + +module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); +MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); +module_param_named(opt, dwc_otg_module_params.opt, int, 0444); +MODULE_PARM_DESC(opt, "OPT Mode"); +module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); +MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); +module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444); +MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); +module_param_named(speed, dwc_otg_module_params.speed, int, 0444); +MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); +module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444); +MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support"); +module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); +MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); +module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444); +MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); +module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444); +MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768"); +module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444); +MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); +module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); +MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); +module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444); +MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); +module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); +MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); +module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); +MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768"); +module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444); +/** @todo Set the max to 512K, modify checks */ +MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535"); +module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444); +MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511"); +module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444); +MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16"); +module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444); +MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15"); +module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); +MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); +module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444); +MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); +module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); +MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double"); +module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444); +MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal"); +module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); +MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); +module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); +MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); +module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); +MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); +module_param_named(debug, g_dbg_lvl, int, 0444); +MODULE_PARM_DESC(debug, "0"); +module_param_named(en_multiple_tx_fifo, + dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); +MODULE_PARM_DESC(en_multiple_tx_fifo, + "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); +module_param_named(dev_tx_fifo_size_1, + dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_2, + dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_3, + dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_4, + dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_5, + dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_6, + dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_7, + dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_8, + dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_9, + dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_10, + dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_11, + dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_12, + dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_13, + dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_14, + dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_15, + dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); +module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); +MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit" + "0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); +module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444); +MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); +module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444); +MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); +module_param_named (iomem_base, dwc_iomem_base, ulong, 0444); +MODULE_PARM_DESC (dwc_iomem_base, "The base address of the DWC_OTG register."); +module_param_named (irq, dwc_irq, int, 0444); +MODULE_PARM_DESC (dwc_irq, "The interrupt number"); + +/** @page "Module Parameters" + * + * The following parameters may be specified when starting the module. + * These parameters define how the DWC_otg controller should be + * configured. Parameter values are passed to the CIL initialization + * function dwc_otg_cil_init + * + * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code> + * + + <table> + <tr><td>Parameter Name</td><td>Meaning</td></tr> + + <tr> + <td>otg_cap</td> + <td>Specifies the OTG capabilities. The driver will automatically detect the + value for this parameter if none is specified. + - 0: HNP and SRP capable (default, if available) + - 1: SRP Only capable + - 2: No HNP/SRP capable + </td></tr> + + <tr> + <td>dma_enable</td> + <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs. + The driver will automatically detect the value for this parameter if none is + specified. + - 0: Slave + - 1: DMA (default, if available) + </td></tr> + + <tr> + <td>dma_burst_size</td> + <td>The DMA Burst size (applicable only for External DMA Mode). + - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) + </td></tr> + + <tr> + <td>speed</td> + <td>Specifies the maximum speed of operation in host and device mode. The + actual speed depends on the speed of the attached device and the value of + phy_type. + - 0: High Speed (default) + - 1: Full Speed + </td></tr> + + <tr> + <td>host_support_fs_ls_low_power</td> + <td>Specifies whether low power mode is supported when attached to a Full + Speed or Low Speed device in host mode. + - 0: Don't support low power mode (default) + - 1: Support low power mode + </td></tr> + + <tr> + <td>host_ls_low_power_phy_clk</td> + <td>Specifies the PHY clock rate in low power mode when connected to a Low + Speed device in host mode. This parameter is applicable only if + HOST_SUPPORT_FS_LS_LOW_POWER is enabled. + - 0: 48 MHz (default) + - 1: 6 MHz + </td></tr> + + <tr> + <td>enable_dynamic_fifo</td> + <td> Specifies whether FIFOs may be resized by the driver software. + - 0: Use cC FIFO size parameters + - 1: Allow dynamic FIFO sizing (default) + </td></tr> + + <tr> + <td>data_fifo_size</td> + <td>Total number of 4-byte words in the data FIFO memory. This memory + includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. + - Values: 32 to 32768 (default 8192) + + Note: The total FIFO memory depth in the FPGA configuration is 8192. + </td></tr> + + <tr> + <td>dev_rx_fifo_size</td> + <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic + FIFO sizing is enabled. + - Values: 16 to 32768 (default 1064) + </td></tr> + + <tr> + <td>dev_nperio_tx_fifo_size</td> + <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when + dynamic FIFO sizing is enabled. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td> + <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode + when dynamic FIFO sizing is enabled. + - Values: 4 to 768 (default 256) + </td></tr> + + <tr> + <td>host_rx_fifo_size</td> + <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO + sizing is enabled. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>host_nperio_tx_fifo_size</td> + <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when + dynamic FIFO sizing is enabled in the core. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>host_perio_tx_fifo_size</td> + <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO + sizing is enabled. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>max_transfer_size</td> + <td>The maximum transfer size supported in bytes. + - Values: 2047 to 65,535 (default 65,535) + </td></tr> + + <tr> + <td>max_packet_count</td> + <td>The maximum number of packets in a transfer. + - Values: 15 to 511 (default 511) + </td></tr> + + <tr> + <td>host_channels</td> + <td>The number of host channel registers to use. + - Values: 1 to 16 (default 12) + + Note: The FPGA configuration supports a maximum of 12 host channels. + </td></tr> + + <tr> + <td>dev_endpoints</td> + <td>The number of endpoints in addition to EP0 available for device mode + operations. + - Values: 1 to 15 (default 6 IN and OUT) + + Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in + addition to EP0. + </td></tr> + + <tr> + <td>phy_type</td> + <td>Specifies the type of PHY interface to use. By default, the driver will + automatically detect the phy_type. + - 0: Full Speed + - 1: UTMI+ (default, if available) + - 2: ULPI + </td></tr> + + <tr> + <td>phy_utmi_width</td> + <td>Specifies the UTMI+ Data Width. This parameter is applicable for a + phy_type of UTMI+. Also, this parameter is applicable only if the + OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the + core has been configured to work at either data path width. + - Values: 8 or 16 bits (default 16) + </td></tr> + + <tr> + <td>phy_ulpi_ddr</td> + <td>Specifies whether the ULPI operates at double or single data rate. This + parameter is only applicable if phy_type is ULPI. + - 0: single data rate ULPI interface with 8 bit wide data bus (default) + - 1: double data rate ULPI interface with 4 bit wide data bus + </td></tr> + + <tr> + <td>i2c_enable</td> + <td>Specifies whether to use the I2C interface for full speed PHY. This + parameter is only applicable if PHY_TYPE is FS. + - 0: Disabled (default) + - 1: Enabled + </td></tr> + + <tr> + <td>otg_en_multiple_tx_fifo</td> + <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. + The driver will automatically detect the value for this parameter if none is + specified. + - 0: Disabled + - 1: Enabled (default, if available) + </td></tr> + + <tr> + <td>dev_tx_fifo_size_n (n = 1 to 15)</td> + <td>Number of 4-byte words in each of the Tx FIFOs in device mode + when dynamic FIFO sizing is enabled. + - Values: 4 to 768 (default 256) + </td></tr> + +*/ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_driver.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_driver.h new file mode 100644 index 0000000000..7e6940dd13 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_driver.h @@ -0,0 +1,84 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.h $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 510275 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_OTG_DRIVER_H__) +#define __DWC_OTG_DRIVER_H__ + +/** @file + * This file contains the interface to the Linux driver. + */ +#include "dwc_otg_cil.h" + +/* Type declarations */ +struct dwc_otg_pcd; +struct dwc_otg_hcd; + +/** + * This structure is a wrapper that encapsulates the driver components used to + * manage a single DWC_otg controller. + */ +typedef struct dwc_otg_device +{ + /** Base address returned from ioremap() */ + void *base; + + /** Pointer to the core interface structure. */ + dwc_otg_core_if_t *core_if; + + /** Register offset for Diagnostic API.*/ + uint32_t reg_offset; + + /** Pointer to the PCD structure. */ + struct dwc_otg_pcd *pcd; + + /** Pointer to the HCD structure. */ + struct dwc_otg_hcd *hcd; + + /** Flag to indicate whether the common IRQ handler is installed. */ + uint8_t common_irq_installed; + + /** Interrupt request number. */ + unsigned int irq; + + /** Physical address of Control and Status registers, used by + * release_mem_region(). + */ + resource_size_t phys_addr; + + /** Length of memory region, used by release_mem_region(). */ + unsigned long base_len; +} dwc_otg_device_t; + +//#define dev_dbg(fake, format, arg...) printk(KERN_CRIT __FILE__ ":%d: " format "\n" , __LINE__, ## arg) + +#endif diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd.c new file mode 100644 index 0000000000..ad6bc72ce8 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd.c @@ -0,0 +1,2870 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 631780 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the implementation of the HCD. In Linux, the HCD + * implements the hc_driver API. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> + +#include <linux/device.h> + +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> + +#include <linux/dma-mapping.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +#include <asm/irq.h> +#include "dwc_otg_ifx.h" // for Infineon platform specific. +extern atomic_t release_later; + +static u64 dma_mask = DMA_BIT_MASK(32); + +static const char dwc_otg_hcd_name [] = "dwc_otg_hcd"; +static const struct hc_driver dwc_otg_hc_driver = +{ + .description = dwc_otg_hcd_name, + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(dwc_otg_hcd_t), + .irq = dwc_otg_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2, + //.reset = + .start = dwc_otg_hcd_start, + //.suspend = + //.resume = + .stop = dwc_otg_hcd_stop, + .urb_enqueue = dwc_otg_hcd_urb_enqueue, + .urb_dequeue = dwc_otg_hcd_urb_dequeue, + .endpoint_disable = dwc_otg_hcd_endpoint_disable, + .get_frame_number = dwc_otg_hcd_get_frame_number, + .hub_status_data = dwc_otg_hcd_hub_status_data, + .hub_control = dwc_otg_hcd_hub_control, + //.hub_suspend = + //.hub_resume = +}; + + +/** + * Work queue function for starting the HCD when A-Cable is connected. + * The dwc_otg_hcd_start() must be called in a process context. + */ +static void hcd_start_func(struct work_struct *work) +{ + struct dwc_otg_hcd *priv = + container_of(work, struct dwc_otg_hcd, start_work); + struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p; + DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd); + if (usb_hcd) { + dwc_otg_hcd_start(usb_hcd); + } +} + + +/** + * HCD Callback function for starting the HCD when A-Cable is + * connected. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_start_cb(void *_p) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p); + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + if (core_if->op_state == B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + ((struct usb_hcd *)_p)->self.is_b_host = 1; + } else { + ((struct usb_hcd *)_p)->self.is_b_host = 0; + } + /* Need to start the HCD in a non-interrupt context. */ + INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); + dwc_otg_hcd->_p = _p; + schedule_work(&dwc_otg_hcd->start_work); + return 1; +} + + +/** + * HCD Callback function for stopping the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_stop_cb( void *_p ) +{ + struct usb_hcd *usb_hcd = (struct usb_hcd *)_p; + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_stop( usb_hcd ); + return 1; +} +static void del_xfer_timers(dwc_otg_hcd_t *_hcd) +{ +#ifdef DEBUG + int i; + int num_channels = _hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + del_timer(&_hcd->core_if->hc_xfer_timer[i]); + } +#endif /* */ +} + +static void del_timers(dwc_otg_hcd_t *_hcd) +{ + del_xfer_timers(_hcd); + del_timer(&_hcd->conn_timer); +} + +/** + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + */ +static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd, + struct list_head *_qh_list) +{ + struct list_head *qh_item; + dwc_otg_qh_t *qh; + struct list_head *qtd_item; + dwc_otg_qtd_t *qtd; + + list_for_each(qh_item, _qh_list) { + qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); + for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list; + qtd_item = qh->qtd_list.next) { + qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry); + if (qtd->urb != NULL) { + dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT); + } + dwc_otg_hcd_qtd_remove_and_free(qtd); + } + } +} + +/** + * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + */ +static void kill_all_urbs(dwc_otg_hcd_t *_hcd) +{ + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred); + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive); + kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned); + kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_disconnect_cb( void *_p ) +{ + gintsts_data_t intr; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p); + + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + + /* + * Set status flags for the hub driver. + */ + dwc_otg_hcd->flags.b.port_connect_status_change = 1; + dwc_otg_hcd->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr.d32 = 0; + intr.b.nptxfempty = 1; + intr.b.ptxfempty = 1; + intr.b.hcintr = 1; + dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0); + dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0); + + del_timers(dwc_otg_hcd); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { + if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { + hprt0_data_t hprt0 = { .d32=0 }; + DWC_PRINT("Disconnect: PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); + } + + dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if ); + } + + /* Respond with an error status to all URBs in the schedule. */ + kill_all_urbs(dwc_otg_hcd); + + if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { + /* Clean up any host channels that were in use. */ + int num_channels; + int i; + dwc_hc_t *channel; + dwc_otg_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + + if (!dwc_otg_hcd->core_if->dma_enable) { + /* Flush out any channel requests in slave mode. */ + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + } + } + } + + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + /* Halt the channel. */ + hcchar.b.chdis = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + + dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel); + list_add_tail(&channel->hc_list_entry, + &dwc_otg_hcd->free_hc_list); + } + } + } + + /* A disconnect will end the session so the B-Device is no + * longer a B-host. */ + ((struct usb_hcd *)_p)->self.is_b_host = 0; + + return 1; +} + +/** + * Connection timeout function. An OTG host is required to display a + * message if the device does not connect within 10 seconds. + */ +void dwc_otg_hcd_connect_timeout( unsigned long _ptr ) +{ + DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr); + DWC_PRINT( "Connect Timeout\n"); + DWC_ERROR( "Device Not Connected/Responding\n" ); +} + +/** + * Start the connection timer. An OTG host is required to display a + * message if the device does not connect within 10 seconds. The + * timer is deleted if a port connect interrupt occurs before the + * timer expires. + */ +static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd) +{ + init_timer( &_hcd->conn_timer ); + _hcd->conn_timer.function = dwc_otg_hcd_connect_timeout; + _hcd->conn_timer.data = (unsigned long)0; + _hcd->conn_timer.expires = jiffies + (HZ*10); + add_timer( &_hcd->conn_timer ); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param _p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_session_start_cb( void *_p ) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p); + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p); + dwc_otg_hcd_start_connect_timer( dwc_otg_hcd ); + return 1; +} + +/** + * HCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { + .start = dwc_otg_hcd_start_cb, + .stop = dwc_otg_hcd_stop_cb, + .disconnect = dwc_otg_hcd_disconnect_cb, + .session_start = dwc_otg_hcd_session_start_cb, + .p = 0, +}; + + +/** + * Reset tasklet function + */ +static void reset_tasklet_func (unsigned long data) +{ + dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data; + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + + DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); + + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay (60); + + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + dwc_otg_hcd->flags.b.port_reset_change = 1; + + return; +} + +static struct tasklet_struct reset_tasklet = { + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = reset_tasklet_func, + .data = 0, +}; + +/** + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int init_hcd_usecs(dwc_otg_hcd_t *_hcd); + +int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device) +{ + struct usb_hcd *hcd = NULL; + dwc_otg_hcd_t *dwc_otg_hcd = NULL; + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + int num_channels; + int i; + dwc_hc_t *channel; + + int retval = 0; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); + + /* + * Allocate memory for the base HCD plus the DWC OTG HCD. + * Initialize the base HCD. + */ + hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev)); + if (hcd == NULL) { + retval = -ENOMEM; + goto error1; + } + dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */ + hcd->regs = otg_dev->base; + hcd->rsrc_start = (int)otg_dev->base; + + hcd->self.otg_port = 1; + + /* Initialize the DWC OTG HCD. */ + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_hcd->core_if = otg_dev->core_if; + otg_dev->hcd = dwc_otg_hcd; + + /* Register the HCD CIL Callbacks */ + dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, + &hcd_cil_callbacks, hcd); + + /* Initialize the non-periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred); + + /* Initialize the periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL); + if (channel == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: host channel allocation failed\n", __func__); + goto error2; + } + memset(channel, 0, sizeof(dwc_hc_t)); + channel->hc_num = i; + dwc_otg_hcd->hc_ptr_array[i] = channel; +#ifdef DEBUG + init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); +#endif + + DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel); + } + + /* Initialize the Connection timeout timer. */ + init_timer( &dwc_otg_hcd->conn_timer ); + + /* Initialize reset tasklet. */ + reset_tasklet.data = (unsigned long) dwc_otg_hcd; + dwc_otg_hcd->reset_tasklet = &reset_tasklet; + + /* Set device flags indicating whether the HCD supports DMA. */ + if (otg_dev->core_if->dma_enable) { + DWC_PRINT("Using DMA mode\n"); + //_dev->dma_mask = (void *)~0; + //_dev->coherent_dma_mask = ~0; + _dev->dma_mask = &dma_mask; + _dev->coherent_dma_mask = DMA_BIT_MASK(32); + } else { + DWC_PRINT("Using Slave mode\n"); + _dev->dma_mask = (void *)0; + _dev->coherent_dma_mask = 0; + } + + init_hcd_usecs(dwc_otg_hcd); + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls dwc_otg_hcd_start method. + */ + retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); + if (retval < 0) { + goto error2; + } + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (otg_dev->core_if->dma_enable) { + dwc_otg_hcd->status_buf = + dma_alloc_coherent(_dev, + DWC_OTG_HCD_STATUS_BUF_SIZE, + &dwc_otg_hcd->status_buf_dma, + GFP_KERNEL | GFP_DMA); + } else { + dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE, + GFP_KERNEL); + } + if (dwc_otg_hcd->status_buf == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: status_buf allocation failed\n", __func__); + goto error3; + } + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", + dev_name(_dev), hcd->self.busnum); + + return 0; + + /* Error conditions */ +error3: + usb_remove_hcd(hcd); +error2: + dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); +error1: + return retval; +} + +/** + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc_otg_hcd_remove(struct device *_dev) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; + struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); + + /* Turn off all interrupts */ + dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0); + dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0); + + usb_remove_hcd(hcd); + + dwc_otg_hcd_free(hcd); + + usb_put_hcd(hcd); + + return; +} + + +/* ========================================================================= + * Linux HC Driver Functions + * ========================================================================= */ + +/** + * Initializes dynamic portions of the DWC_otg HCD state. + */ +static void hcd_reinit(dwc_otg_hcd_t *_hcd) +{ + struct list_head *item; + int num_channels; + int i; + dwc_hc_t *channel; + + _hcd->flags.d32 = 0; + + _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active; + _hcd->available_host_channels = _hcd->core_if->core_params->host_channels; + + /* + * Put all channels in the free channel list and clean up channel + * states. + */ + item = _hcd->free_hc_list.next; + while (item != &_hcd->free_hc_list) { + list_del(item); + item = _hcd->free_hc_list.next; + } + num_channels = _hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = _hcd->hc_ptr_array[i]; + list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list); + dwc_otg_hc_cleanup(_hcd->core_if, channel); + } + + /* Initialize the DWC core for host mode operation. */ + dwc_otg_core_host_init(_hcd->core_if); +} + +/** Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. */ +int dwc_otg_hcd_start(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if; + struct usb_bus *bus; + + // int retval; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); + + bus = hcd_to_bus(_hcd); + + /* Initialize the bus state. If the core is in Device Mode + * HALT the USB bus and return. */ + if (dwc_otg_is_device_mode (core_if)) { + _hcd->state = HC_STATE_HALT; + return 0; + } + _hcd->state = HC_STATE_RUNNING; + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); + /* Inform the HUB driver to resume. */ + usb_hcd_resume_root_hub(_hcd); + } + else { +#if 0 + struct usb_device *udev; + udev = usb_alloc_dev(NULL, bus, 0); + if (!udev) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); + return -ENODEV; + } + udev->speed = USB_SPEED_HIGH; + /* Not needed - VJ + if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval); + return -ENODEV; + } + */ +#else + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); +#endif + } + + hcd_reinit(dwc_otg_hcd); + + return 0; +} + +static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list) +{ + struct list_head *item; + dwc_otg_qh_t *qh; + + if (_qh_list->next == NULL) { + /* The list hasn't been initialized yet. */ + return; + } + + /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(_hcd, _qh_list); + + for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) { + qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); + dwc_otg_hcd_qh_remove_and_free(_hcd, qh); + } +} + +/** + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +void dwc_otg_hcd_stop(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + hprt0_data_t hprt0 = { .d32=0 }; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); + + /* Turn off all host-specific interrupts. */ + dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if ); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off the vbus power */ + DWC_PRINT("PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); + + return; +} + + +/** Returns the current frame number. */ +int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + hfnum_data_t hfnum; + + hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if-> + host_if->host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum); +#endif + return hfnum.b.frnum; +} + +/** + * Frees secondary storage associated with the dwc_otg_hcd structure contained + * in the struct usb_hcd field. + */ +void dwc_otg_hcd_free(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + int i; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); + + del_timers(dwc_otg_hcd); + + /* Free memory for QH/QTD lists */ + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); + + /* Free memory for the host channels. */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; + if (hc != NULL) { + DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc); + kfree(hc); + } + } + + if (dwc_otg_hcd->core_if->dma_enable) { + if (dwc_otg_hcd->status_buf_dma) { + dma_free_coherent(_hcd->self.controller, + DWC_OTG_HCD_STATUS_BUF_SIZE, + dwc_otg_hcd->status_buf, + dwc_otg_hcd->status_buf_dma); + } + } else if (dwc_otg_hcd->status_buf != NULL) { + kfree(dwc_otg_hcd->status_buf); + } + + return; +} + + +#ifdef DEBUG +static void dump_urb_info(struct urb *_urb, char* _fn_name) +{ + DWC_PRINT("%s, urb %p\n", _fn_name, _urb); + DWC_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe)); + DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe), + (usb_pipein(_urb->pipe) ? "IN" : "OUT")); + DWC_PRINT(" Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: pipetype = "CONTROL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; + default: pipetype = "UNKNOWN"; break; + }; pipetype;})); + DWC_PRINT(" Speed: %s\n", + ({char *speed; + switch (_urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HIGH"; break; + case USB_SPEED_FULL: speed = "FULL"; break; + case USB_SPEED_LOW: speed = "LOW"; break; + default: speed = "UNKNOWN"; break; + }; speed;})); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe))); + DWC_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length); + DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", + _urb->transfer_buffer, (void *)_urb->transfer_dma); + DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", + _urb->setup_packet, (void *)_urb->setup_dma); + DWC_PRINT(" Interval: %d\n", _urb->interval); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < _urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d:\n", i); + DWC_PRINT(" offset: %d, length %d\n", + _urb->iso_frame_desc[i].offset, + _urb->iso_frame_desc[i].length); + } + } +} + +static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh) +{ + if (qh->channel != NULL) { + dwc_hc_t *hc = qh->channel; + struct list_head *item; + dwc_otg_qh_t *qh_item; + int num_channels = _hcd->core_if->core_params->host_channels; + int i; + + dwc_otg_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + + hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + hcdma = dwc_read_reg32(&hc_regs->hcdma); + + DWC_PRINT(" Assigned to channel %p:\n", hc); + DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" qh: %p\n", hc->qh); + DWC_PRINT(" NP inactive sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_inactive) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP active sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_deferred) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" NP deferred sched:\n"); + list_for_each(item, &_hcd->non_periodic_sched_active) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } DWC_PRINT(" Channels: \n"); + for (i = 0; i < num_channels; i++) { + dwc_hc_t *hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" %2d: %p\n", i, hc); + } + } +} +#endif // DEBUG + +/** Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. */ +int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd, + struct urb *_urb, + gfp_t _mem_flags) +{ + unsigned long flags; + int retval; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + dwc_otg_qtd_t *qtd; + + local_irq_save(flags); + retval = usb_hcd_link_urb_to_ep(_hcd, _urb); + if (retval) { + local_irq_restore(flags); + return retval; + } +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue"); + } +#endif // DEBUG + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* No longer connected. */ + local_irq_restore(flags); + return -ENODEV; + } + + qtd = dwc_otg_hcd_qtd_create (_urb); + if (qtd == NULL) { + local_irq_restore(flags); + DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); + return -ENOMEM; + } + + retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd); + if (retval < 0) { + DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " + "Error status %d\n", retval); + dwc_otg_hcd_qtd_free(qtd); + } + + local_irq_restore (flags); + return retval; +} + +/** Aborts/cancels a USB transfer request. Always returns 0 to indicate + * success. */ +int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status) +{ + unsigned long flags; + dwc_otg_hcd_t *dwc_otg_hcd; + dwc_otg_qtd_t *urb_qtd; + dwc_otg_qh_t *qh; + int retval; + //struct usb_host_endpoint *_ep = NULL; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); + + local_irq_save(flags); + + retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status); + if (retval) { + local_irq_restore(flags); + return retval; + } + + dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv; + if (urb_qtd == NULL) { + printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb); + goto done; + } + qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr; + if (qh == NULL) { + goto done; + } + +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue"); + if (urb_qtd == qh->qtd_in_process) { + dump_channel_info(dwc_otg_hcd, qh); + } + } +#endif // DEBUG + + if (urb_qtd == qh->qtd_in_process) { + /* The QTD is in process (it has been assigned to a channel). */ + + if (dwc_otg_hcd->flags.b.port_connect_status) { + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); + } + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + dwc_otg_hcd_qtd_remove_and_free(urb_qtd); + if (urb_qtd == qh->qtd_in_process) { + dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); + qh->channel = NULL; + qh->qtd_in_process = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); + } + +done: + local_irq_restore(flags); + _urb->hcpriv = NULL; + + /* Higher layer software sets URB status. */ + usb_hcd_unlink_urb_from_ep(_hcd, _urb); + usb_hcd_giveback_urb(_hcd, _urb, _status); + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("Called usb_hcd_giveback_urb()\n"); + DWC_PRINT(" urb->status = %d\n", _urb->status); + } + + return 0; +} + + +/** Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. */ +void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd, + struct usb_host_endpoint *_ep) + +{ + dwc_otg_qh_t *qh; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd); + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " + "endpoint=%d\n", _ep->desc.bEndpointAddress, + dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress)); + + qh = (dwc_otg_qh_t *)(_ep->hcpriv); + if (qh != NULL) { +#ifdef DEBUG + /** Check that the QTD list is really empty */ + if (!list_empty(&qh->qtd_list)) { + DWC_WARN("DWC OTG HCD EP DISABLE:" + " QTD List for this endpoint is not empty\n"); + } +#endif // DEBUG + + dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); + _ep->hcpriv = NULL; + } + + return; +} +extern int dwc_irq; +/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs */ +irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + + mask_and_ack_ifx_irq (dwc_irq); + return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd)); +} + +/** Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. */ +int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + + _buf[0] = 0; + _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change || + dwc_otg_hcd->flags.b.port_reset_change || + dwc_otg_hcd->flags.b.port_enable_change || + dwc_otg_hcd->flags.b.port_suspend_change || + dwc_otg_hcd->flags.b.port_over_current_change) << 1; + +#ifdef DEBUG + if (_buf[0]) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" + " Root port status changed\n"); + DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", + dwc_otg_hcd->flags.b.port_connect_status_change); + DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", + dwc_otg_hcd->flags.b.port_reset_change); + DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", + dwc_otg_hcd->flags.b.port_enable_change); + DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", + dwc_otg_hcd->flags.b.port_suspend_change); + DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", + dwc_otg_hcd->flags.b.port_over_current_change); + } +#endif // DEBUG + return (_buf[0] != 0); +} + +#ifdef DWC_HS_ELECT_TST +/* + * Quick and dirty hack to implement the HS Electrical Test + * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. + * + * This code was copied from our userspace app "hset". It sends a + * Get Device Descriptor control sequence in two parts, first the + * Setup packet by itself, followed some time later by the In and + * Ack packets. Rather than trying to figure out how to add this + * functionality to the normal driver code, we just hijack the + * hardware, using these two function to drive the hardware + * directly. + */ + +dwc_otg_core_global_regs_t *global_regs; +dwc_otg_host_global_regs_t *hc_global_regs; +dwc_otg_hc_regs_t *hc_regs; +uint32_t *data_fifo; + +static void do_setup(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Send Setup packet (Get Device Descriptor) + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + // hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + MDELAY(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + /* Fill FIFO with Setup data for Get Device Descriptor */ + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + dwc_write_reg32(data_fifo++, 0x01000680); + dwc_write_reg32(data_fifo++, 0x00080000); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} + +static void do_in_ack(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + host_grxsts_data_t grxsts; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Receive Control In packet + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + MDELAY(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 1; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer */ + if (grxsts.b.bcnt > 0) { + int i; + int word_count = (grxsts.b.bcnt + 3) / 4; + + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + + for (i = 0; i < word_count; i++) { + (void)dwc_read_reg32(data_fifo++); + } + } + + //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt); + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); + break; + } + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); + break; + } + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + // usleep(100000); + // mdelay(100); + MDELAY(1); + + /* + * Send handshake packet + */ + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + MDELAY(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 0; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} +#endif /* DWC_HS_ELECT_TST */ + +/** Handles hub class-specific requests.*/ +int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd, + u16 _typeReq, + u16 _wValue, + u16 _wIndex, + char *_buf, + u16 _wLength) +{ + int retval = 0; + + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd); + dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if; + struct usb_hub_descriptor *desc; + hprt0_data_t hprt0 = {.d32 = 0}; + + uint32_t port_status; + + switch (_typeReq) { + case ClearHubFeature: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearHubFeature 0x%x\n", _wValue); + switch (_wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + default: + retval = -EINVAL; + DWC_ERROR ("DWC OTG HCD - " + "ClearHubFeature request %xh unknown\n", _wValue); + } + break; + case ClearPortFeature: + if (!_wIndex || _wIndex > 1) + goto error; + + switch (_wValue) { + case USB_PORT_FEAT_ENABLE: + DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtena = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + /* Clear Resume bit */ + mdelay (100); + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtpwr = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port inidicator not supported */ + break; + case USB_PORT_FEAT_C_CONNECTION: + /* Clears drivers internal connect status change + * flag */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + dwc_otg_hcd->flags.b.port_connect_status_change = 0; + break; + case USB_PORT_FEAT_C_RESET: + /* Clears the driver's internal Port Reset Change + * flag */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + dwc_otg_hcd->flags.b.port_reset_change = 0; + break; + case USB_PORT_FEAT_C_ENABLE: + /* Clears the driver's internal Port + * Enable/Disable Change flag */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + dwc_otg_hcd->flags.b.port_enable_change = 0; + break; + case USB_PORT_FEAT_C_SUSPEND: + /* Clears the driver's internal Port Suspend + * Change flag, which is set when resume signaling on + * the host port is complete */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + dwc_otg_hcd->flags.b.port_suspend_change = 0; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + dwc_otg_hcd->flags.b.port_over_current_change = 0; + break; + default: + retval = -EINVAL; + DWC_ERROR ("DWC OTG HCD - " + "ClearPortFeature request %xh " + "unknown or unsupported\n", _wValue); + } + break; + case GetHubDescriptor: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubDescriptor\n"); + desc = (struct usb_hub_descriptor *)_buf; + desc->bDescLength = 9; + desc->bDescriptorType = 0x29; + desc->bNbrPorts = 1; + desc->wHubCharacteristics = 0x08; + desc->bPwrOn2PwrGood = 1; + desc->bHubContrCurrent = 0; + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; + break; + case GetHubStatus: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubStatus\n"); + memset (_buf, 0, 4); + break; + case GetPortStatus: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetPortStatus\n"); + + if (!_wIndex || _wIndex > 1) + goto error; + + port_status = 0; + + if (dwc_otg_hcd->flags.b.port_connect_status_change) + port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); + + if (dwc_otg_hcd->flags.b.port_enable_change) + port_status |= (1 << USB_PORT_FEAT_C_ENABLE); + + if (dwc_otg_hcd->flags.b.port_suspend_change) + port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + + if (dwc_otg_hcd->flags.b.port_reset_change) + port_status |= (1 << USB_PORT_FEAT_C_RESET); + + if (dwc_otg_hcd->flags.b.port_over_current_change) { + DWC_ERROR("Device Not Supported\n"); + port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); + } + + if (!dwc_otg_hcd->flags.b.port_connect_status) { + printk("DISCONNECTED PORT\n"); + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ +#if 1 // winder. + *((u32 *) _buf) = cpu_to_le32(port_status); +#else + *((__le32 *) _buf) = cpu_to_le32(port_status); +#endif + break; + } + + hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); + DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); + + if (hprt0.b.prtconnsts) + port_status |= (1 << USB_PORT_FEAT_CONNECTION); + + if (hprt0.b.prtena) + port_status |= (1 << USB_PORT_FEAT_ENABLE); + + if (hprt0.b.prtsusp) + port_status |= (1 << USB_PORT_FEAT_SUSPEND); + + if (hprt0.b.prtovrcurract) + port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); + + if (hprt0.b.prtrst) + port_status |= (1 << USB_PORT_FEAT_RESET); + + if (hprt0.b.prtpwr) + port_status |= (1 << USB_PORT_FEAT_POWER); + + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) + port_status |= USB_PORT_STAT_HIGH_SPEED; + + else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) + port_status |= (1 << USB_PORT_FEAT_LOWSPEED); + + if (hprt0.b.prttstctl) + port_status |= (1 << USB_PORT_FEAT_TEST); + + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ +#if 1 // winder. + *((u32 *) _buf) = cpu_to_le32(port_status); +#else + *((__le32 *) _buf) = cpu_to_le32(port_status); +#endif + + break; + case SetHubFeature: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetHubFeature\n"); + /* No HUB features supported */ + break; + case SetPortFeature: + if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1)) + goto error; + + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + + switch (_wValue) { + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (_hcd->self.otg_port == _wIndex + && _hcd->self.b_hnp_enable) { + gotgctl_data_t gotgctl = {.d32=0}; + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&core_if->core_global_regs-> + gotgctl, 0, gotgctl.d32); + core_if->op_state = A_SUSPEND; + } + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtsusp = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32); + /* Suspend the Phy Clock */ + { + pcgcctl_data_t pcgcctl = {.d32=0}; + pcgcctl.b.stoppclk = 1; + dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32); + } + + /* For HNP the bus must be suspended for at least 200ms.*/ + if (_hcd->self.b_hnp_enable) { + mdelay(200); + //DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state); + } + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtpwr = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_RESET: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + /* TODO: Is this for OTG protocol?? + * We shoudl remove OTG totally for Danube system. + * But, in the future, maybe we need this. + */ +#if 1 // winder + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); +#else + /* When B-Host the Port reset bit is set in + * the Start HCD Callback function, so that + * the reset is started within 1ms of the HNP + * success interrupt. */ + if (!_hcd->self.is_b_host) { + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } +#endif + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + MDELAY (60); + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + +#ifdef DWC_HS_ELECT_TST + case USB_PORT_FEAT_TEST: + { + uint32_t t; + gintmsk_data_t gintmsk; + + t = (_wIndex >> 8); /* MSB wIndex USB */ + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t); + printk("USB_PORT_FEAT_TEST %d\n", t); + if (t < 6) { + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prttstctl = t; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } else { + /* Setup global vars with reg addresses (quick and + * dirty hack, should be cleaned up) + */ + global_regs = core_if->core_global_regs; + hc_global_regs = core_if->host_if->host_global_regs; + hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500); + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + + if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive suspend on the root port */ + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtsusp = 1; + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive resume on the root port */ + hprt0.d32 = dwc_otg_read_hprt0 (core_if); + hprt0.b.prtsusp = 0; + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay(100); + + /* Clear the resume bit */ + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Send the In and Ack packets */ + do_in_ack(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } + } + break; + } +#endif /* DWC_HS_ELECT_TST */ + + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + default: + retval = -EINVAL; + DWC_ERROR ("DWC OTG HCD - " + "SetPortFeature request %xh " + "unknown or unsupported\n", _wValue); + break; + } + break; + default: +error: + retval = -EINVAL; + DWC_WARN ("DWC OTG HCD - " + "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", + _typeReq, _wIndex, _wValue); + break; + } + + return retval; +} + + +/** + * Assigns transactions from a QTD to a free host channel and initializes the + * host channel to perform the transactions. The host channel is removed from + * the free list. + * + * @param _hcd The HCD state structure. + * @param _qh Transactions from the first QTD for this QH are selected and + * assigned to a free host channel. + */ +static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + dwc_hc_t *hc; + dwc_otg_qtd_t *qtd; + struct urb *urb; + + DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh); + + hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry); + + /* Remove the host channel from the free list. */ + list_del_init(&hc->hc_list_entry); + + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + urb = qtd->urb; + _qh->channel = hc; + _qh->qtd_in_process = qtd; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + hc->dev_addr = usb_pipedevice(urb->pipe); + hc->ep_num = usb_pipeendpoint(urb->pipe); + + if (urb->dev->speed == USB_SPEED_LOW) { + hc->speed = DWC_OTG_EP_SPEED_LOW; + } else if (urb->dev->speed == USB_SPEED_FULL) { + hc->speed = DWC_OTG_EP_SPEED_FULL; + } else { + hc->speed = DWC_OTG_EP_SPEED_HIGH; + } + hc->max_packet = dwc_max_packet(_qh->maxp); + + hc->xfer_started = 0; + hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; + hc->error_state = (qtd->error_count > 0); + hc->halt_on_queue = 0; + hc->halt_pending = 0; + hc->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + hc->do_ping = _qh->ping_state; + hc->ep_is_in = (usb_pipein(urb->pipe) != 0); + hc->data_pid_start = _qh->data_toggle; + hc->multi_count = 1; + + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length; + } else { + hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length; + } + hc->xfer_len = urb->transfer_buffer_length - urb->actual_length; + hc->xfer_count = 0; + + /* + * Set the split attributes + */ + hc->do_split = 0; + if (_qh->do_split) { + hc->do_split = 1; + hc->xact_pos = qtd->isoc_split_pos; + hc->complete_split = qtd->complete_split; + hc->hub_addr = urb->dev->tt->hub->devnum; + hc->port_addr = urb->dev->ttport; + } + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; + switch (qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); + hc->do_ping = 0; + hc->ep_is_in = 0; + hc->data_pid_start = DWC_OTG_HC_PID_SETUP; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma; + } else { + hc->xfer_buff = (uint8_t *)urb->setup_packet; + } + hc->xfer_len = 8; + break; + case DWC_OTG_CONTROL_DATA: + DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); + hc->data_pid_start = qtd->data_toggle; + break; + case DWC_OTG_CONTROL_STATUS: + /* + * Direction is opposite of data direction or IN if no + * data. + */ + DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); + if (urb->transfer_buffer_length == 0) { + hc->ep_is_in = 1; + } else { + hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN); + } + if (hc->ep_is_in) { + hc->do_ping = 0; + } + hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + hc->xfer_len = 0; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma; + } else { + hc->xfer_buff = (uint8_t *)_hcd->status_buf; + } + break; + } + break; + case PIPE_BULK: + hc->ep_type = DWC_OTG_EP_TYPE_BULK; + break; + case PIPE_INTERRUPT: + hc->ep_type = DWC_OTG_EP_TYPE_INTR; + break; + case PIPE_ISOCHRONOUS: + { + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; + hc->ep_type = DWC_OTG_EP_TYPE_ISOC; + if (_hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma; + } else { + hc->xfer_buff = (uint8_t *)urb->transfer_buffer; + } + hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset; + hc->xfer_len = frame_desc->length - qtd->isoc_split_offset; + + if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { + if (hc->xfer_len <= 188) { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; + } + else { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN; + } + } + } + break; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * This value may be modified when the transfer is started to + * reflect the actual transfer length. + */ + hc->multi_count = dwc_hb_mult(_qh->maxp); + } + + dwc_otg_hc_init(_hcd->core_if, hc); + hc->qh = _qh; +} +#define DEBUG_HOST_CHANNELS +#ifdef DEBUG_HOST_CHANNELS +static int last_sel_trans_num_per_scheduled = 0; +module_param(last_sel_trans_num_per_scheduled, int, 0444); + +static int last_sel_trans_num_nonper_scheduled = 0; +module_param(last_sel_trans_num_nonper_scheduled, int, 0444); + +static int last_sel_trans_num_avail_hc_at_start = 0; +module_param(last_sel_trans_num_avail_hc_at_start, int, 0444); + +static int last_sel_trans_num_avail_hc_at_end = 0; +module_param(last_sel_trans_num_avail_hc_at_end, int, 0444); +#endif /* DEBUG_HOST_CHANNELS */ + +/** + * This function selects transactions from the HCD transfer schedule and + * assigns them to available host channels. It is called from HCD interrupt + * handler functions. + * + * @param _hcd The HCD state structure. + * + * @return The types of new transactions that were assigned to host channels. + */ +dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd) +{ + struct list_head *qh_ptr; + dwc_otg_qh_t *qh; + int num_channels; + unsigned long flags; + dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); +#endif /* */ + +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_per_scheduled = 0; + last_sel_trans_num_nonper_scheduled = 0; + last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels; +#endif /* DEBUG_HOST_CHANNELS */ + + /* Process entries in the periodic ready list. */ + num_channels = _hcd->core_if->core_params->host_channels; + qh_ptr = _hcd->periodic_sched_ready.next; + while (qh_ptr != &_hcd->periodic_sched_ready + && !list_empty(&_hcd->free_hc_list)) { + + // Make sure we leave one channel for non periodic transactions. + local_irq_save(flags); + if (_hcd->available_host_channels <= 1) { + local_irq_restore(flags); + break; + } + _hcd->available_host_channels--; + local_irq_restore(flags); +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_per_scheduled++; +#endif /* DEBUG_HOST_CHANNELS */ + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(_hcd, qh); + + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule. + */ + qh_ptr = qh_ptr->next; + local_irq_save(flags); + list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned); + local_irq_restore(flags); + ret_val = DWC_OTG_TRANSACTION_PERIODIC; + } + + /* + * Process entries in the deferred portion of the non-periodic list. + * A NAK put them here and, at the right time, they need to be + * placed on the sched_inactive list. + */ + qh_ptr = _hcd->non_periodic_sched_deferred.next; + while (qh_ptr != &_hcd->non_periodic_sched_deferred) { + uint16_t frame_number = + dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + qh_ptr = qh_ptr->next; + + if (dwc_frame_num_le(qh->sched_frame, frame_number)) { + // NAK did this + /* + * Move the QH from the non periodic deferred schedule to + * the non periodic inactive schedule. + */ + local_irq_save(flags); + list_move(&qh->qh_list_entry, + &_hcd->non_periodic_sched_inactive); + local_irq_restore(flags); + } + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + qh_ptr = _hcd->non_periodic_sched_inactive.next; + num_channels = _hcd->core_if->core_params->host_channels; + while (qh_ptr != &_hcd->non_periodic_sched_inactive + && !list_empty(&_hcd->free_hc_list)) { + + local_irq_save(flags); + if (_hcd->available_host_channels < 1) { + local_irq_restore(flags); + break; + } + _hcd->available_host_channels--; + local_irq_restore(flags); +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_nonper_scheduled++; +#endif /* DEBUG_HOST_CHANNELS */ + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(_hcd, qh); + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule. + */ + qh_ptr = qh_ptr->next; + local_irq_save(flags); + list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active); + local_irq_restore(flags); + + if (ret_val == DWC_OTG_TRANSACTION_NONE) { + ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; + } else { + ret_val = DWC_OTG_TRANSACTION_ALL; + } + + } +#ifdef DEBUG_HOST_CHANNELS + last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels; +#endif /* DEBUG_HOST_CHANNELS */ + + return ret_val; +} + +/** + * Attempts to queue a single transaction request for a host channel + * associated with either a periodic or non-periodic transfer. This function + * assumes that there is space available in the appropriate request queue. For + * an OUT transfer or SETUP transaction in Slave mode, it checks whether space + * is available in the appropriate Tx FIFO. + * + * @param _hcd The HCD state structure. + * @param _hc Host channel descriptor associated with either a periodic or + * non-periodic transfer. + * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx + * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic + * transfers. + * + * @return 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO. + */ +static int queue_transaction(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + uint16_t _fifo_dwords_avail) +{ + int retval; + + if (_hcd->core_if->dma_enable) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + _hc->qh->ping_state = 0; + } + retval = 0; + } else if (_hc->halt_pending) { + /* Don't queue a request if the channel has been halted. */ + retval = 0; + } else if (_hc->halt_on_queue) { + dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status); + retval = 0; + } else if (_hc->do_ping) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + } + retval = 0; + } else if (!_hc->ep_is_in || + _hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + if ((_fifo_dwords_avail * 4) >= _hc->max_packet) { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc); + } + } else { + retval = -1; + } + } else { + if (!_hc->xfer_started) { + dwc_otg_hc_start_transfer(_hcd->core_if, _hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc); + } + } + + return retval; +} + +/** + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + */ +static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd) +{ + gnptxsts_data_t tx_status; + struct list_head *orig_qh_ptr; + dwc_otg_qh_t *qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + + dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs; + + DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.nptxfspcavail); +#endif + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + orig_qh_ptr = _hcd->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO. + */ + do { + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry); + status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } + + /* Advance to next QH, skipping start-of-list entry. */ + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + + } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr); + + if (!_hcd->core_if->dma_enable) { + gintmsk_data_t intr_mask = {.d32 = 0}; + intr_mask.b.nptxfempty = 1; + +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.nptxfspcavail); +#endif + if (more_to_do || no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); + } + } +} + +/** + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + */ +static void process_periodic_channels(dwc_otg_hcd_t *_hcd) +{ + hptxsts_data_t tx_status; + struct list_head *qh_ptr; + dwc_otg_qh_t *qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + + dwc_otg_host_global_regs_t *host_regs; + host_regs = _hcd->core_if->host_if->host_global_regs; + + DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.ptxfspcavail); +#endif + + qh_ptr = _hcd->periodic_sched_assigned.next; + while (qh_ptr != &_hcd->periodic_sched_assigned) { + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + if (tx_status.b.ptxqspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if ((!_hcd->core_if->dma_enable) && + (qh->channel->multi_count > 1)) + { + _hcd->core_if->queuing_high_bandwidth = 1; + } + + status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail); + if (status < 0) { + no_fifo_space = 1; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (_hcd->core_if->dma_enable || + (status == 0 || + qh->channel->requests == qh->channel->multi_count)) { + qh_ptr = qh_ptr->next; + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule. + */ + list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued); + + /* done queuing high bandwidth */ + _hcd->core_if->queuing_high_bandwidth = 0; + } + } + + if (!_hcd->core_if->dma_enable) { + dwc_otg_core_global_regs_t *global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + + global_regs = _hcd->core_if->core_global_regs; + intr_mask.b.ptxfempty = 1; +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.ptxfspcavail); +#endif + if (!(list_empty(&_hcd->periodic_sched_assigned)) || + no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); + } + } +} + +/** + * This function processes the currently active host channels and queues + * transactions for these channels to the DWC_otg controller. It is called + * from HCD interrupt handler functions. + * + * @param _hcd The HCD state structure. + * @param _tr_type The type(s) of transactions to queue (non-periodic, + * periodic, or both). + */ +void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd, + dwc_otg_transaction_type_e _tr_type) +{ +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); +#endif + /* Process host channels associated with periodic transfers. */ + if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC || + _tr_type == DWC_OTG_TRANSACTION_ALL) && + !list_empty(&_hcd->periodic_sched_assigned)) { + + process_periodic_channels(_hcd); + } + + /* Process host channels associated with non-periodic transfers. */ + if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || + _tr_type == DWC_OTG_TRANSACTION_ALL)) { + if (!list_empty(&_hcd->non_periodic_sched_active)) { + process_non_periodic_channels(_hcd); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process. + */ + gintmsk_data_t gintmsk = {.d32 = 0}; + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); + } + } +} + +/** + * Sets the final status of an URB and returns it to the device driver. Any + * required cleanup of the URB is performed. + */ +void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb, + int _status) + __releases(_hcd->lock) +__acquires(_hcd->lock) +{ +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", + __func__, _urb, usb_pipedevice(_urb->pipe), + usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) ? "IN" : "OUT", _status); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < _urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d status: %d\n", + i, _urb->iso_frame_desc[i].status); + } + } + } +#endif + + _urb->status = _status; + _urb->hcpriv = NULL; + usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb); + spin_unlock(&_hcd->lock); + usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status); + spin_lock(&_hcd->lock); +} + +/* + * Returns the Queue Head for an URB. + */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb) +{ + struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb); + return (dwc_otg_qh_t *)ep->hcpriv; +} + +#ifdef DEBUG +void dwc_print_setup_data (uint8_t *setup) +{ + int i; + if (CHK_DEBUG_LEVEL(DBG_HCD)){ + DWC_PRINT("Setup Data = MSB "); + for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]); + DWC_PRINT("\n"); + DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device"); + DWC_PRINT(" bmRequestType Type = "); + switch ((setup[0]&0x60) >> 5) { + case 0: DWC_PRINT("Standard\n"); break; + case 1: DWC_PRINT("Class\n"); break; + case 2: DWC_PRINT("Vendor\n"); break; + case 3: DWC_PRINT("Reserved\n"); break; + } + DWC_PRINT(" bmRequestType Recipient = "); + switch (setup[0]&0x1f) { + case 0: DWC_PRINT("Device\n"); break; + case 1: DWC_PRINT("Interface\n"); break; + case 2: DWC_PRINT("Endpoint\n"); break; + case 3: DWC_PRINT("Other\n"); break; + default: DWC_PRINT("Reserved\n"); break; + } + DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); + DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2])); + DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4])); + DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6])); + } +} +#endif + +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) { +#ifdef DEBUG +#if 0 + DWC_PRINT("Frame remaining at SOF:\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->frrem_samples, _hcd->frrem_accum, + (_hcd->frrem_samples > 0) ? + _hcd->frrem_accum/_hcd->frrem_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %u, avg %u\n", + _hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum, + (_hcd->core_if->hfnum_7_samples > 0) ? + _hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %u, avg %u\n", + _hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum, + (_hcd->core_if->hfnum_0_samples > 0) ? + _hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %u, avg %u\n", + _hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum, + (_hcd->core_if->hfnum_other_samples > 0) ? + _hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point A (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a, + (_hcd->hfnum_7_samples_a > 0) ? + _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a, + (_hcd->hfnum_0_samples_a > 0) ? + _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a, + (_hcd->hfnum_other_samples_a > 0) ? + _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point B (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b, + (_hcd->hfnum_7_samples_b > 0) ? + _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b, + (_hcd->hfnum_0_samples_b > 0) ? + _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + _hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b, + (_hcd->hfnum_other_samples_b > 0) ? + _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0); +#endif +#endif +} + +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd) +{ +#ifdef DEBUG + int num_channels; + int i; + gnptxsts_data_t np_tx_status; + hptxsts_data_t p_tx_status; + + num_channels = _hcd->core_if->core_params->host_channels; + DWC_PRINT("\n"); + DWC_PRINT("************************************************************\n"); + DWC_PRINT("HCD State:\n"); + DWC_PRINT(" Num channels: %d\n", num_channels); + for (i = 0; i < num_channels; i++) { + dwc_hc_t *hc = _hcd->hc_ptr_array[i]; + DWC_PRINT(" Channel %d:\n", i); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" speed: %d\n", hc->speed); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" multi_count: %d\n", hc->multi_count); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" xfer_count: %d\n", hc->xfer_count); + DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue); + DWC_PRINT(" halt_pending: %d\n", hc->halt_pending); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" do_split: %d\n", hc->do_split); + DWC_PRINT(" complete_split: %d\n", hc->complete_split); + DWC_PRINT(" hub_addr: %d\n", hc->hub_addr); + DWC_PRINT(" port_addr: %d\n", hc->port_addr); + DWC_PRINT(" xact_pos: %d\n", hc->xact_pos); + DWC_PRINT(" requests: %d\n", hc->requests); + DWC_PRINT(" qh: %p\n", hc->qh); + if (hc->xfer_started) { + hfnum_data_t hfnum; + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); + hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar); + hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz); + hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk); + DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32); + DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32); + DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32); + DWC_PRINT(" hcint: 0x%08x\n", hcint.d32); + DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32); + } + if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) { + dwc_otg_qtd_t *qtd; + struct urb *urb; + qtd = hc->qh->qtd_in_process; + urb = qtd->urb; + DWC_PRINT(" URB Info:\n"); + DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb); + if (urb != NULL) { + DWC_PRINT(" Dev: %d, EP: %d %s\n", + usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT"); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer); + DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma); + DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length); + DWC_PRINT(" actual_length: %d\n", urb->actual_length); + } + } + } + //DWC_PRINT(" non_periodic_channels: %d\n", _hcd->non_periodic_channels); + //DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels); + DWC_PRINT(" available_channels: %d\n", _hcd->available_host_channels); + DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs); + np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts); + DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail); + DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail); + p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts); + DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail); + DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); + dwc_otg_hcd_dump_frrem(_hcd); + dwc_otg_dump_global_registers(_hcd->core_if); + dwc_otg_dump_host_registers(_hcd->core_if); + DWC_PRINT("************************************************************\n"); + DWC_PRINT("\n"); +#endif +} +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd.h new file mode 100644 index 0000000000..8a20dffa0a --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd.h @@ -0,0 +1,676 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 537387 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY +#if !defined(__DWC_HCD_H__) +#define __DWC_HCD_H__ + +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +struct lm_device; +struct dwc_otg_device; + +#include "dwc_otg_cil.h" +//#include "dwc_otg_ifx.h" // winder + + +/** + * @file + * + * This file contains the structures, constants, and interfaces for + * the Host Contoller Driver (HCD). + * + * The Host Controller Driver (HCD) is responsible for translating requests + * from the USB Driver into the appropriate actions on the DWC_otg controller. + * It isolates the USBD from the specifics of the controller by providing an + * API to the USBD. + */ + +/** + * Phases for control transfers. + */ +typedef enum dwc_otg_control_phase { + DWC_OTG_CONTROL_SETUP, + DWC_OTG_CONTROL_DATA, + DWC_OTG_CONTROL_STATUS +} dwc_otg_control_phase_e; + +/** Transaction types. */ +typedef enum dwc_otg_transaction_type { + DWC_OTG_TRANSACTION_NONE, + DWC_OTG_TRANSACTION_PERIODIC, + DWC_OTG_TRANSACTION_NON_PERIODIC, + DWC_OTG_TRANSACTION_ALL +} dwc_otg_transaction_type_e; + +/** + * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, + * interrupt, or isochronous transfer. A single QTD is created for each URB + * (of one of these types) submitted to the HCD. The transfer associated with + * a QTD may require one or multiple transactions. + * + * A QTD is linked to a Queue Head, which is entered in either the + * non-periodic or periodic schedule for execution. When a QTD is chosen for + * execution, some or all of its transactions may be executed. After + * execution, the state of the QTD is updated. The QTD may be retired if all + * its transactions are complete or if an error occurred. Otherwise, it + * remains in the schedule so more transactions can be executed later. + */ +struct dwc_otg_qh; +typedef struct dwc_otg_qtd { + /** + * Determines the PID of the next data packet for the data phase of + * control transfers. Ignored for other transfer types.<br> + * One of the following values: + * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 + */ + uint8_t data_toggle; + + /** Current phase for control transfers (Setup, Data, or Status). */ + dwc_otg_control_phase_e control_phase; + + /** Keep track of the current split type + * for FS/LS endpoints on a HS Hub */ + uint8_t complete_split; + + /** How many bytes transferred during SSPLIT OUT */ + uint32_t ssplit_out_xfer_count; + + /** + * Holds the number of bus errors that have occurred for a transaction + * within this transfer. + */ + uint8_t error_count; + + /** + * Index of the next frame descriptor for an isochronous transfer. A + * frame descriptor describes the buffer position and length of the + * data to be transferred in the next scheduled (micro)frame of an + * isochronous transfer. It also holds status for that transaction. + * The frame index starts at 0. + */ + int isoc_frame_index; + + /** Position of the ISOC split on full/low speed */ + uint8_t isoc_split_pos; + + /** Position of the ISOC split in the buffer for the current frame */ + uint16_t isoc_split_offset; + + /** URB for this transfer */ + struct urb *urb; + + /** This list of QTDs */ + struct list_head qtd_list_entry; + + /* Field to track the qh pointer */ + struct dwc_otg_qh *qtd_qh_ptr; +} dwc_otg_qtd_t; + +/** + * A Queue Head (QH) holds the static characteristics of an endpoint and + * maintains a list of transfers (QTDs) for that endpoint. A QH structure may + * be entered in either the non-periodic or periodic schedule. + */ +typedef struct dwc_otg_qh { + /** + * Endpoint type. + * One of the following values: + * - USB_ENDPOINT_XFER_CONTROL + * - USB_ENDPOINT_XFER_ISOC + * - USB_ENDPOINT_XFER_BULK + * - USB_ENDPOINT_XFER_INT + */ + uint8_t ep_type; + uint8_t ep_is_in; + + /** wMaxPacketSize Field of Endpoint Descriptor. */ + uint16_t maxp; + + /** + * Determines the PID of the next data packet for non-control + * transfers. Ignored for control transfers.<br> + * One of the following values: + * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 + */ + uint8_t data_toggle; + + /** Ping state if 1. */ + uint8_t ping_state; + + /** + * List of QTDs for this QH. + */ + struct list_head qtd_list; + + /** Host channel currently processing transfers for this QH. */ + dwc_hc_t *channel; + + /** QTD currently assigned to a host channel for this QH. */ + dwc_otg_qtd_t *qtd_in_process; + + /** Full/low speed endpoint on high-speed hub requires split. */ + uint8_t do_split; + + /** @name Periodic schedule information */ + /** @{ */ + + /** Bandwidth in microseconds per (micro)frame. */ + uint8_t usecs; + + /** Interval between transfers in (micro)frames. */ + uint16_t interval; + + /** + * (micro)frame to initialize a periodic transfer. The transfer + * executes in the following (micro)frame. + */ + uint16_t sched_frame; + + /** (micro)frame at which last start split was initialized. */ + uint16_t start_split_frame; + + /** @} */ + + uint16_t speed; + uint16_t frame_usecs[8]; + /** Entry for QH in either the periodic or non-periodic schedule. */ + struct list_head qh_list_entry; +} dwc_otg_qh_t; + +/** + * This structure holds the state of the HCD, including the non-periodic and + * periodic schedules. + */ +typedef struct dwc_otg_hcd { + spinlock_t lock; + + /** DWC OTG Core Interface Layer */ + dwc_otg_core_if_t *core_if; + + /** Internal DWC HCD Flags */ + volatile union dwc_otg_hcd_internal_flags { + uint32_t d32; + struct { + unsigned port_connect_status_change : 1; + unsigned port_connect_status : 1; + unsigned port_reset_change : 1; + unsigned port_enable_change : 1; + unsigned port_suspend_change : 1; + unsigned port_over_current_change : 1; + unsigned reserved : 27; + } b; + } flags; + + /** + * Inactive items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are not + * currently assigned to a host channel. + */ + struct list_head non_periodic_sched_inactive; + + /** + * Deferred items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are not + * currently assigned to a host channel. + * When we get an NAK, the QH goes here. + */ + struct list_head non_periodic_sched_deferred; + + /** + * Active items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are + * currently assigned to a host channel. + */ + struct list_head non_periodic_sched_active; + + /** + * Pointer to the next Queue Head to process in the active + * non-periodic schedule. + */ + struct list_head *non_periodic_qh_ptr; + + /** + * Inactive items in the periodic schedule. This is a list of QHs for + * periodic transfers that are _not_ scheduled for the next frame. + * Each QH in the list has an interval counter that determines when it + * needs to be scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth used (i.e. + * must assume that all periodic transfers may need to execute in the + * same frame). However, it greatly simplifies scheduling and should + * be sufficient for the vast majority of OTG hosts, which need to + * connect to a small number of peripherals at one time. + * + * Items move from this list to periodic_sched_ready when the QH + * interval counter is 0 at SOF. + */ + struct list_head periodic_sched_inactive; + + /** + * List of periodic QHs that are ready for execution in the next + * frame, but have not yet been assigned to host channels. + * + * Items move from this list to periodic_sched_assigned as host + * channels become available during the current frame. + */ + struct list_head periodic_sched_ready; + + /** + * List of periodic QHs to be executed in the next frame that are + * assigned to host channels. + * + * Items move from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg controller. + */ + struct list_head periodic_sched_assigned; + + /** + * List of periodic QHs that have been queued for execution. + * + * Items move from this list to either periodic_sched_inactive or + * periodic_sched_ready when the channel associated with the transfer + * is released. If the interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for the next + * frame. Otherwise, the item moves to periodic_sched_inactive. + */ + struct list_head periodic_sched_queued; + + /** + * Total bandwidth claimed so far for periodic transfers. This value + * is in microseconds per (micro)frame. The assumption is that all + * periodic transfers may occur in the same (micro)frame. + */ + uint16_t periodic_usecs; + + /** + * Total bandwidth claimed so far for all periodic transfers + * in a frame. + * This will include a mixture of HS and FS transfers. + * Units are microseconds per (micro)frame. + * We have a budget per frame and have to schedule + * transactions accordingly. + * Watch out for the fact that things are actually scheduled for the + * "next frame". + */ + uint16_t frame_usecs[8]; + + /** + * Frame number read from the core at SOF. The value ranges from 0 to + * DWC_HFNUM_MAX_FRNUM. + */ + uint16_t frame_number; + + /** + * Free host channels in the controller. This is a list of + * dwc_hc_t items. + */ + struct list_head free_hc_list; + + /** + * Number of available host channels. + */ + int available_host_channels; + + /** + * Array of pointers to the host channel descriptors. Allows accessing + * a host channel descriptor given the host channel number. This is + * useful in interrupt handlers. + */ + dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS]; + + /** + * Buffer to use for any data received during the status phase of a + * control transfer. Normally no data is transferred during the status + * phase. This buffer is used as a bit bucket. + */ + uint8_t *status_buf; + + /** + * DMA address for status_buf. + */ + dma_addr_t status_buf_dma; +#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 + + /** + * Structure to allow starting the HCD in a non-interrupt context + * during an OTG role change. + */ + struct work_struct start_work; + struct usb_hcd *_p; + + /** + * Connection timer. An OTG host must display a message if the device + * does not connect. Started when the VBus power is turned on via + * sysfs attribute "buspower". + */ + struct timer_list conn_timer; + + /* Tasket to do a reset */ + struct tasklet_struct *reset_tasklet; + +#ifdef DEBUG + uint32_t frrem_samples; + uint64_t frrem_accum; + + uint32_t hfnum_7_samples_a; + uint64_t hfnum_7_frrem_accum_a; + uint32_t hfnum_0_samples_a; + uint64_t hfnum_0_frrem_accum_a; + uint32_t hfnum_other_samples_a; + uint64_t hfnum_other_frrem_accum_a; + + uint32_t hfnum_7_samples_b; + uint64_t hfnum_7_frrem_accum_b; + uint32_t hfnum_0_samples_b; + uint64_t hfnum_0_frrem_accum_b; + uint32_t hfnum_other_samples_b; + uint64_t hfnum_other_frrem_accum_b; +#endif + +} dwc_otg_hcd_t; + +/** Gets the dwc_otg_hcd from a struct usb_hcd */ +static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) +{ + return (dwc_otg_hcd_t *)(hcd->hcd_priv); +} + +/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ +static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd) +{ + return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv); +} + +/** @name HCD Create/Destroy Functions */ +/** @{ */ +extern int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device); +extern void dwc_otg_hcd_remove(struct device *_dev); +/** @} */ + +/** @name Linux HC Driver API Functions */ +/** @{ */ + +extern int dwc_otg_hcd_start(struct usb_hcd *hcd); +extern void dwc_otg_hcd_stop(struct usb_hcd *hcd); +extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd); +extern void dwc_otg_hcd_free(struct usb_hcd *hcd); + +extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags); +extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, + struct urb *urb, + int status); +extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); + +extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); + +extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, + char *buf); +extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength); + +/** @} */ + +/** @name Transaction Execution Functions */ +/** @{ */ +extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd); +extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd, + dwc_otg_transaction_type_e _tr_type); +extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb, + int _status); +/** @} */ + +/** @name Interrupt Handler Functions */ +/** @{ */ +extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num); +extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd); +/** @} */ + + +/** @name Schedule Queue Functions */ +/** @{ */ + +/* Implemented in dwc_otg_hcd_queue.c */ +extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb); +extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb); +extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh); +extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh); +extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh); +extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit); +extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay); + +/** Remove and free a QH */ +static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd, + dwc_otg_qh_t *_qh) +{ + dwc_otg_hcd_qh_remove (_hcd, _qh); + dwc_otg_hcd_qh_free (_qh); +} + +/** Allocates memory for a QH structure. + * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void) +{ +#ifdef _SC_BUILD_ + return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_ATOMIC); +#else + return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL); +#endif +} + +extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb); +extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb); +extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd); + +/** Allocates memory for a QTD structure. + * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void) +{ +#ifdef _SC_BUILD_ + return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_ATOMIC); +#else + return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL); +#endif +} + +/** Frees the memory for a QTD structure. QTD should already be removed from + * list. + * @param[in] _qtd QTD to free.*/ +static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd) +{ + kfree (_qtd); +} + +/** Removes a QTD from list. + * @param[in] _qtd QTD to remove from list. */ +static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd) +{ + unsigned long flags; + local_irq_save (flags); + list_del (&_qtd->qtd_list_entry); + local_irq_restore (flags); +} + +/** Remove and free a QTD */ +static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd) +{ + dwc_otg_hcd_qtd_remove (_qtd); + dwc_otg_hcd_qtd_free (_qtd); +} + +/** @} */ + + +/** @name Internal Functions */ +/** @{ */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb); +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd); +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd); +/** @} */ + + +/** Gets the usb_host_endpoint associated with an URB. */ +static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb) +{ + struct usb_device *dev = _urb->dev; + int ep_num = usb_pipeendpoint(_urb->pipe); + if (usb_pipein(_urb->pipe)) + return dev->ep_in[ep_num]; + else + return dev->ep_out[ep_num]; +} + +/** + * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is + * qualified with its direction (possible 32 endpoints per device). + */ +#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \ + ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ + ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) + +/** Gets the QH that contains the list_head */ +#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry)) + +/** Gets the QTD that contains the list_head */ +#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry)) + +/** Check if QH is non-periodic */ +#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \ + (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL)) + +/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ +#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +/** Packet size for any kind of endpoint descriptor */ +#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) + +/** + * Returns true if _frame1 is less than or equal to _frame2. The comparison is + * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the + * frame number when the max frame number is reached. + */ +static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2) +{ + return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <= + (DWC_HFNUM_MAX_FRNUM >> 1); +} + +/** + * Returns true if _frame1 is greater than _frame2. The comparison is done + * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame + * number when the max frame number is reached. + */ +static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2) +{ + return (_frame1 != _frame2) && + (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) < + (DWC_HFNUM_MAX_FRNUM >> 1)); +} + +/** + * Increments _frame by the amount specified by _inc. The addition is done + * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. + */ +static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc) +{ + return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM; +} + +static inline uint16_t dwc_full_frame_num (uint16_t _frame) +{ + return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3; +} + +static inline uint16_t dwc_micro_frame_num (uint16_t _frame) +{ + return (_frame) & 0x7; +} + +#ifdef DEBUG +/** + * Macro to sample the remaining PHY clocks left in the current frame. This + * may be used during debugging to determine the average time it takes to + * execute sections of code. There are two possible sample points, "a" and + * "b", so the _letter argument must be one of these values. + * + * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For + * example, "cat /sys/devices/lm0/hcd_frrem". + */ +#define dwc_sample_frrem(_hcd, _qh, _letter) \ +{ \ + hfnum_data_t hfnum; \ + dwc_otg_qtd_t *qtd; \ + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ + if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ + switch (hfnum.b.frnum & 0x7) { \ + case 7: \ + _hcd->hfnum_7_samples_##_letter++; \ + _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + case 0: \ + _hcd->hfnum_0_samples_##_letter++; \ + _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + default: \ + _hcd->hfnum_other_samples_##_letter++; \ + _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + } \ + } \ +} +#else // DEBUG +#define dwc_sample_frrem(_hcd, _qh, _letter) +#endif // DEBUG +#endif // __DWC_HCD_H__ +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c new file mode 100644 index 0000000000..f6f3f3dc8d --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c @@ -0,0 +1,1839 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 553126 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +const int erratum_usb09_patched = 0; +const int deferral_on = 1; +const int nak_deferral_delay = 8; +const int nyet_deferral_delay = 1; +/** @file + * This file contains the implementation of the HCD Interrupt handlers. + */ + +/** This function handles interrupts for the HCD. */ +int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd) +{ + int retval = 0; + + dwc_otg_core_if_t *core_if = _dwc_otg_hcd->core_if; + gintsts_data_t gintsts; +#ifdef DEBUG + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; +#endif + + /* Check if HOST Mode */ + if (dwc_otg_is_host_mode(core_if)) { + gintsts.d32 = dwc_otg_read_core_intr(core_if); + if (!gintsts.d32) { + return 0; + } + +#ifdef DEBUG + /* Don't print debug message in the interrupt handler on SOF */ +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + DWC_DEBUGPL (DBG_HCD, "\n"); +#endif + +#ifdef DEBUG +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32); +#endif + + if (gintsts.b.sofintr) { + retval |= dwc_otg_hcd_handle_sof_intr (_dwc_otg_hcd); + } + if (gintsts.b.rxstsqlvl) { + retval |= dwc_otg_hcd_handle_rx_status_q_level_intr (_dwc_otg_hcd); + } + if (gintsts.b.nptxfempty) { + retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr (_dwc_otg_hcd); + } + if (gintsts.b.i2cintr) { + /** @todo Implement i2cintr handler. */ + } + if (gintsts.b.portintr) { + retval |= dwc_otg_hcd_handle_port_intr (_dwc_otg_hcd); + } + if (gintsts.b.hcintr) { + retval |= dwc_otg_hcd_handle_hc_intr (_dwc_otg_hcd); + } + if (gintsts.b.ptxfempty) { + retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (_dwc_otg_hcd); + } +#ifdef DEBUG +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", + dwc_read_reg32(&global_regs->gintsts)); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", + dwc_read_reg32(&global_regs->gintmsk)); + } +#endif + +#ifdef DEBUG +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + DWC_DEBUGPL (DBG_HCD, "\n"); +#endif + + } + + return retval; +} + +#ifdef DWC_TRACK_MISSED_SOFS +#warning Compiling code to track missed SOFs +#define FRAME_NUM_ARRAY_SIZE 1000 +/** + * This function is for debug only. + */ +static inline void track_missed_sofs(uint16_t _curr_frame_number) { + static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; + static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; + static int frame_num_idx = 0; + static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; + static int dumped_frame_num_array = 0; + + if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { + if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != _curr_frame_number)) { + frame_num_array[frame_num_idx] = _curr_frame_number; + last_frame_num_array[frame_num_idx++] = last_frame_num; + } + } else if (!dumped_frame_num_array) { + int i; + printk(KERN_EMERG USB_DWC "Frame Last Frame\n"); + printk(KERN_EMERG USB_DWC "----- ----------\n"); + for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { + printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n", + frame_num_array[i], last_frame_num_array[i]); + } + dumped_frame_num_array = 1; + } + last_frame_num = _curr_frame_number; +} +#endif + +/** + * Handles the start-of-frame interrupt in host mode. Non-periodic + * transactions may be queued to the DWC_otg controller for the current + * (micro)frame. Periodic transactions may be queued to the controller for the + * next (micro)frame. + */ +int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_hcd) +{ + hfnum_data_t hfnum; + struct list_head *qh_entry; + dwc_otg_qh_t *qh; + dwc_otg_transaction_type_e tr_type; + gintsts_data_t gintsts = {.d32 = 0}; + + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); +#endif + + _hcd->frame_number = hfnum.b.frnum; + +#ifdef DEBUG + _hcd->frrem_accum += hfnum.b.frrem; + _hcd->frrem_samples++; +#endif + +#ifdef DWC_TRACK_MISSED_SOFS + track_missed_sofs(_hcd->frame_number); +#endif + + /* Determine whether any periodic QHs should be executed. */ + qh_entry = _hcd->periodic_sched_inactive.next; + while (qh_entry != &_hcd->periodic_sched_inactive) { + qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry); + qh_entry = qh_entry->next; + if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) { + /* + * Move QH to the ready list to be executed next + * (micro)frame. + */ + list_move(&qh->qh_list_entry, &_hcd->periodic_sched_ready); + } + } + + tr_type = dwc_otg_hcd_select_transactions(_hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(_hcd, tr_type); + } + + /* Clear interrupt */ + gintsts.b.sofintr = 1; + dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at + * least one packet in the Rx FIFO. The packets are moved from the FIFO to + * memory if the DWC_otg controller is operating in Slave mode. */ +int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd) +{ + host_grxsts_data_t grxsts; + dwc_hc_t *hc = NULL; + + DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); + + grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp); + + hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; + + /* Packet Status */ + DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); + DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); + DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start); + DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer. */ + if (grxsts.b.bcnt > 0) { + dwc_otg_read_packet(_dwc_otg_hcd->core_if, + hc->xfer_buff, + grxsts.b.bcnt); + + /* Update the HC fields for the next packet received. */ + hc->xfer_count += grxsts.b.bcnt; + hc->xfer_buff += grxsts.b.bcnt; + } + + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: + case DWC_GRXSTS_PKTSTS_CH_HALTED: + /* Handled in interrupt, just ignore data */ + break; + default: + DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts); + break; + } + + return 1; +} + +/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More + * data packets may be written to the FIFO for OUT transfers. More requests + * may be written to the non-periodic request queue for IN transfers. This + * interrupt is enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd) +{ + DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); + dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, + DWC_OTG_TRANSACTION_NON_PERIODIC); + return 1; +} + +/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data + * packets may be written to the FIFO for OUT transfers. More requests may be + * written to the periodic request queue for IN transfers. This interrupt is + * enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd) +{ + DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); + dwc_otg_hcd_queue_transactions(_dwc_otg_hcd, + DWC_OTG_TRANSACTION_PERIODIC); + return 1; +} + +/** There are multiple conditions that can cause a port interrupt. This function + * determines which interrupt conditions have occurred and handles them + * appropriately. */ +int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd) +{ + int retval = 0; + hprt0_data_t hprt0; + hprt0_data_t hprt0_modify; + + hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0); + hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0); + + /* Clear appropriate bits in HPRT0 to clear the interrupt bit in + * GINTSTS */ + + hprt0_modify.b.prtena = 0; + hprt0_modify.b.prtconndet = 0; + hprt0_modify.b.prtenchng = 0; + hprt0_modify.b.prtovrcurrchng = 0; + + /* Port Connect Detected + * Set flag and clear if detected */ + if (hprt0.b.prtconndet) { + DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " + "Port Connect Detected--\n", hprt0.d32); + _dwc_otg_hcd->flags.b.port_connect_status_change = 1; + _dwc_otg_hcd->flags.b.port_connect_status = 1; + hprt0_modify.b.prtconndet = 1; + + /* B-Device has connected, Delete the connection timer. */ + del_timer( &_dwc_otg_hcd->conn_timer ); + + /* The Hub driver asserts a reset when it sees port connect + * status change flag */ + retval |= 1; + } + + /* Port Enable Changed + * Clear if detected - Set internal flag if disabled */ + if (hprt0.b.prtenchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Enable Changed--\n", hprt0.d32); + hprt0_modify.b.prtenchng = 1; + if (hprt0.b.prtena == 1) { + int do_reset = 0; + dwc_otg_core_params_t *params = _dwc_otg_hcd->core_if->core_params; + dwc_otg_core_global_regs_t *global_regs = _dwc_otg_hcd->core_if->core_global_regs; + dwc_otg_host_if_t *host_if = _dwc_otg_hcd->core_if->host_if; + + /* Check if we need to adjust the PHY clock speed for + * low power and adjust it */ + if (params->host_support_fs_ls_low_power) + { + gusbcfg_data_t usbcfg; + + usbcfg.d32 = dwc_read_reg32 (&global_regs->gusbcfg); + + if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) || + (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED)) + { + /* + * Low power + */ + hcfg_data_t hcfg; + if (usbcfg.b.phylpwrclksel == 0) { + /* Set PHY low power clock select for FS/LS devices */ + usbcfg.b.phylpwrclksel = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + do_reset = 1; + } + + hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); + + if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) && + (params->host_ls_low_power_phy_clk == + DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) + { + /* 6 MHZ */ + DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); + if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) { + hcfg.b.fslspclksel = DWC_HCFG_6_MHZ; + dwc_write_reg32(&host_if->host_global_regs->hcfg, + hcfg.d32); + do_reset = 1; + } + } + else { + /* 48 MHZ */ + DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n"); + if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) { + hcfg.b.fslspclksel = DWC_HCFG_48_MHZ; + dwc_write_reg32(&host_if->host_global_regs->hcfg, + hcfg.d32); + do_reset = 1; + } + } + } + else { + /* + * Not low power + */ + if (usbcfg.b.phylpwrclksel == 1) { + usbcfg.b.phylpwrclksel = 0; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + do_reset = 1; + } + } + + if (do_reset) { + tasklet_schedule(_dwc_otg_hcd->reset_tasklet); + } + } + + if (!do_reset) { + /* Port has been enabled set the reset change flag */ + _dwc_otg_hcd->flags.b.port_reset_change = 1; + } + + } else { + _dwc_otg_hcd->flags.b.port_enable_change = 1; + } + retval |= 1; + } + + /** Overcurrent Change Interrupt */ + if (hprt0.b.prtovrcurrchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Overcurrent Changed--\n", hprt0.d32); + _dwc_otg_hcd->flags.b.port_over_current_change = 1; + hprt0_modify.b.prtovrcurrchng = 1; + retval |= 1; + } + + /* Clear Port Interrupts */ + dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); + + return retval; +} + + +/** This interrupt indicates that one or more host channels has a pending + * interrupt. There are multiple conditions that can cause each host channel + * interrupt. This function determines which conditions have occurred for each + * host channel interrupt and handles them appropriately. */ +int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd) +{ + int i; + int retval = 0; + haint_data_t haint; + + /* Clear appropriate bits in HCINTn to clear the interrupt bit in + * GINTSTS */ + + haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if); + + for (i=0; i<_dwc_otg_hcd->core_if->core_params->host_channels; i++) { + if (haint.b2.chint & (1 << i)) { + retval |= dwc_otg_hcd_handle_hc_n_intr (_dwc_otg_hcd, i); + } + } + + return retval; +} + +/* Macro used to clear one channel interrupt */ +#define clear_hc_int(_hc_regs_,_intr_) \ +do { \ + hcint_data_t hcint_clear = {.d32 = 0}; \ + hcint_clear.b._intr_ = 1; \ + dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \ +} while (0) + +/* + * Macro used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +#define disable_hc_int(_hc_regs_,_intr_) \ +do { \ + hcintmsk_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ + dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \ +} while (0) + +/** + * Gets the actual length of a transfer after the transfer halts. _halt_status + * holds the reason for the halt. + * + * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE, + * *_short_read is set to 1 upon return if less than the requested + * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon + * return. _short_read may also be NULL on entry, in which case it remains + * unchanged. + */ +static uint32_t get_actual_xfer_length(dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status, + int *_short_read) +{ + hctsiz_data_t hctsiz; + uint32_t length; + + if (_short_read != NULL) { + *_short_read = 0; + } + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + + if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) { + if (_hc->ep_is_in) { + length = _hc->xfer_len - hctsiz.b.xfersize; + if (_short_read != NULL) { + *_short_read = (hctsiz.b.xfersize != 0); + } + } else if (_hc->qh->do_split) { + length = _qtd->ssplit_out_xfer_count; + } else { + length = _hc->xfer_len; + } + } else { + /* + * Must use the hctsiz.pktcnt field to determine how much data + * has been transferred. This field reflects the number of + * packets that have been transferred via the USB. This is + * always an integral number of packets if the transfer was + * halted before its normal completion. (Can't use the + * hctsiz.xfersize field because that reflects the number of + * bytes transferred via the AHB, not the USB). + */ + length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet; + } + + return length; +} + +/** + * Updates the state of the URB after a Transfer Complete interrupt on the + * host channel. Updates the actual_length field of the URB based on the + * number of bytes transferred via the host channel. Sets the URB status + * if the data transfer is finished. + * + * @return 1 if the data transfer specified by the URB is completely finished, + * 0 otherwise. + */ +static int update_urb_state_xfer_comp(dwc_hc_t *_hc, + dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb, + dwc_otg_qtd_t * _qtd, int *status) +{ + int xfer_done = 0; + int short_read = 0; + + _urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_COMPLETE, + &short_read); + + if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) { + xfer_done = 1; + if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) { + *status = -EREMOTEIO; + } else { + *status = 0; + } + } + +#ifdef DEBUG + { + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", + __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _hc->xfer_len); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", + _urb->transfer_buffer_length); + DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", + short_read, xfer_done); + } +#endif + + return xfer_done; +} + +/* + * Save the starting data toggle for the next transfer. The data toggle is + * saved in the QH for non-control transfers and it's saved in the QTD for + * control transfers. + */ +static void save_data_toggle(dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd) +{ + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + + if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { + dwc_otg_qh_t *qh = _hc->qh; + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + qh->data_toggle = DWC_OTG_HC_PID_DATA0; + } else { + qh->data_toggle = DWC_OTG_HC_PID_DATA1; + } + } else { + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + _qtd->data_toggle = DWC_OTG_HC_PID_DATA0; + } else { + _qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + } + } +} + +/** + * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic + * QHs, removes the QH from the active non-periodic schedule. If any QTDs are + * still linked to the QH, the QH is added to the end of the inactive + * non-periodic schedule. For periodic QHs, removes the QH from the periodic + * schedule if no more QTDs are linked to the QH. + */ +static void deactivate_qh(dwc_otg_hcd_t *_hcd, + dwc_otg_qh_t *_qh, + int free_qtd) +{ + int continue_split = 0; + dwc_otg_qtd_t *qtd; + + DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _hcd, _qh, free_qtd); + + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + + if (qtd->complete_split) { + continue_split = 1; + } + else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) || + (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END)) + { + continue_split = 1; + } + + if (free_qtd) { + /* + * Note that this was previously a call to + * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd. + * However, that call frees the qtd memory, and we continue in the + * interrupt logic to access it many more times, including writing + * to it. With slub debugging on, it is clear that we were writing + * to memory we had freed. + * Call this instead, and now I have moved the freeing of the memory to + * the end of processing this interrupt. + */ + //dwc_otg_hcd_qtd_remove_and_free(qtd); + dwc_otg_hcd_qtd_remove(qtd); + + continue_split = 0; + } + + _qh->channel = NULL; + _qh->qtd_in_process = NULL; + dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split); +} + +/** + * Updates the state of an Isochronous URB when the transfer is stopped for + * any reason. The fields of the current entry in the frame descriptor array + * are set based on the transfer state and the input _halt_status. Completes + * the Isochronous URB if all the URB frames have been completed. + * + * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be + * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. + */ +static dwc_otg_halt_status_e +update_isoc_urb_state(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status) +{ + struct urb *urb = _qtd->urb; + dwc_otg_halt_status_e ret_val = _halt_status; + struct usb_iso_packet_descriptor *frame_desc; + + frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index]; + switch (_halt_status) { + case DWC_OTG_HC_XFER_COMPLETE: + frame_desc->status = 0; + frame_desc->actual_length = + get_actual_xfer_length(_hc, _hc_regs, _qtd, + _halt_status, NULL); + break; + case DWC_OTG_HC_XFER_FRAME_OVERRUN: + urb->error_count++; + if (_hc->ep_is_in) { + frame_desc->status = -ENOSR; + } else { + frame_desc->status = -ECOMM; + } + frame_desc->actual_length = 0; + break; + case DWC_OTG_HC_XFER_BABBLE_ERR: + urb->error_count++; + frame_desc->status = -EOVERFLOW; + /* Don't need to update actual_length in this case. */ + break; + case DWC_OTG_HC_XFER_XACT_ERR: + urb->error_count++; + frame_desc->status = -EPROTO; + frame_desc->actual_length = + get_actual_xfer_length(_hc, _hc_regs, _qtd, + _halt_status, NULL); + default: + DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__, + _halt_status); + BUG(); + break; + } + + if (++_qtd->isoc_frame_index == urb->number_of_packets) { + /* + * urb->status is not used for isoc transfers. + * The individual frame_desc statuses are used instead. + */ + dwc_otg_hcd_complete_urb(_hcd, urb, 0); + ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { + ret_val = DWC_OTG_HC_XFER_COMPLETE; + } + + return ret_val; +} + +/** + * Releases a host channel for use by other transfers. Attempts to select and + * queue more transactions since at least one host channel is available. + * + * @param _hcd The HCD state structure. + * @param _hc The host channel to release. + * @param _qtd The QTD associated with the host channel. This QTD may be freed + * if the transfer is complete or an error has occurred. + * @param _halt_status Reason the channel is being released. This status + * determines the actions taken by this function. + */ +static void release_channel(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status, + int *must_free) +{ + dwc_otg_transaction_type_e tr_type; + int free_qtd; + dwc_otg_qh_t * _qh; + int deact = 1; + int retry_delay = 1; + unsigned long flags; + + DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", __func__, + _hc->hc_num, _halt_status); + + switch (_halt_status) { + case DWC_OTG_HC_XFER_NYET: + case DWC_OTG_HC_XFER_NAK: + if (_halt_status == DWC_OTG_HC_XFER_NYET) { + retry_delay = nyet_deferral_delay; + } else { + retry_delay = nak_deferral_delay; + } + free_qtd = 0; + if (deferral_on && _hc->do_split) { + _qh = _hc->qh; + if (_qh) { + deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay); + } + } + break; + case DWC_OTG_HC_XFER_URB_COMPLETE: + free_qtd = 1; + break; + case DWC_OTG_HC_XFER_AHB_ERR: + case DWC_OTG_HC_XFER_STALL: + case DWC_OTG_HC_XFER_BABBLE_ERR: + free_qtd = 1; + break; + case DWC_OTG_HC_XFER_XACT_ERR: + if (_qtd->error_count >= 3) { + DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n"); + free_qtd = 1; + //_qtd->urb->status = -EPROTO; + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO); + } else { + free_qtd = 0; + } + break; + case DWC_OTG_HC_XFER_URB_DEQUEUE: + /* + * The QTD has already been removed and the QH has been + * deactivated. Don't want to do anything except release the + * host channel and try to queue more transfers. + */ + goto cleanup; + case DWC_OTG_HC_XFER_NO_HALT_STATUS: + DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num); + free_qtd = 0; + break; + default: + free_qtd = 0; + break; + } + if (free_qtd) { + /* Only change must_free to true (do not set to zero here -- it is + * pre-initialized to zero). + */ + *must_free = 1; + } + if (deact) { + deactivate_qh(_hcd, _hc->qh, free_qtd); + } + cleanup: + /* + * Release the host channel for use by other transfers. The cleanup + * function clears the channel interrupt enables and conditions, so + * there's no need to clear the Channel Halted interrupt separately. + */ + dwc_otg_hc_cleanup(_hcd->core_if, _hc); + list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list); + + local_irq_save(flags); + _hcd->available_host_channels++; + local_irq_restore(flags); + /* Try to queue more transfers now that there's a free channel, */ + /* unless erratum_usb09_patched is set */ + if (!erratum_usb09_patched) { + tr_type = dwc_otg_hcd_select_transactions(_hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(_hcd, tr_type); + } + } +} + +/** + * Halts a host channel. If the channel cannot be halted immediately because + * the request queue is full, this function ensures that the FIFO empty + * interrupt for the appropriate queue is enabled so that the halt request can + * be queued when there is space in the request queue. + * + * This function may also be called in DMA mode. In that case, the channel is + * simply released since the core always halts the channel automatically in + * DMA mode. + */ +static void halt_channel(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status, int *must_free) +{ + if (_hcd->core_if->dma_enable) { + release_channel(_hcd, _hc, _qtd, _halt_status, must_free); + return; + } + + /* Slave mode processing... */ + dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status); + + if (_hc->halt_on_queue) { + gintmsk_data_t gintmsk = {.d32 = 0}; + dwc_otg_core_global_regs_t *global_regs; + global_regs = _hcd->core_if->core_global_regs; + + if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + _hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + /* + * Make sure the Non-periodic Tx FIFO empty interrupt + * is enabled so that the non-periodic schedule will + * be processed. + */ + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); + } else { + /* + * Move the QH from the periodic queued schedule to + * the periodic assigned schedule. This allows the + * halt to be queued when the periodic schedule is + * processed. + */ + list_move(&_hc->qh->qh_list_entry, + &_hcd->periodic_sched_assigned); + + /* + * Make sure the Periodic Tx FIFO Empty interrupt is + * enabled so that the periodic schedule will be + * processed. + */ + gintmsk.b.ptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); + } + } +} + +/** + * Performs common cleanup for non-periodic transfers after a Transfer + * Complete interrupt. This function should be called after any endpoint type + * specific handling is finished to release the host channel. + */ +static void complete_non_periodic_xfer(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status, int *must_free) +{ + hcint_data_t hcint; + + _qtd->error_count = 0; + + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + if (hcint.b.nyet) { + /* + * Got a NYET on the last transaction of the transfer. This + * means that the endpoint should be in the PING state at the + * beginning of the next transfer. + */ + _hc->qh->ping_state = 1; + clear_hc_int(_hc_regs,nyet); + } + + /* + * Always halt and release the host channel to make it available for + * more transfers. There may still be more phases for a control + * transfer or more data packets for a bulk transfer at this point, + * but the host channel is still halted. A channel will be reassigned + * to the transfer when the non-periodic schedule is processed after + * the channel is released. This allows transactions to be queued + * properly via dwc_otg_hcd_queue_transactions, which also enables the + * Tx FIFO Empty interrupt if necessary. + */ + if (_hc->ep_is_in) { + /* + * IN transfers in Slave mode require an explicit disable to + * halt the channel. (In DMA mode, this call simply releases + * the channel.) + */ + halt_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } else { + /* + * The channel is automatically disabled by the core for OUT + * transfers in Slave mode. + */ + release_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } +} + +/** + * Performs common cleanup for periodic transfers after a Transfer Complete + * interrupt. This function should be called after any endpoint type specific + * handling is finished to release the host channel. + */ +static void complete_periodic_xfer(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status, int *must_free) +{ + hctsiz_data_t hctsiz; + _qtd->error_count = 0; + + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) { + /* Core halts channel in these cases. */ + release_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } else { + /* Flush any outstanding requests from the Tx queue. */ + halt_channel(_hcd, _hc, _qtd, _halt_status, must_free); + } +} + +/** + * Handles a host channel Transfer Complete interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, int *must_free) +{ + int urb_xfer_done; + dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; + struct urb *urb = _qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); + int status = -EINPROGRESS; + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transfer Complete--\n", _hc->hc_num); + + /* + * Handle xfer complete on CSPLIT. + */ + if (_hc->qh->do_split) { + _qtd->complete_split = 0; + } + + /* Update the QTD and URB states. */ + switch (pipe_type) { + case PIPE_CONTROL: + switch (_qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + if (urb->transfer_buffer_length > 0) { + _qtd->control_phase = DWC_OTG_CONTROL_DATA; + } else { + _qtd->control_phase = DWC_OTG_CONTROL_STATUS; + } + DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); + halt_status = DWC_OTG_HC_XFER_COMPLETE; + break; + case DWC_OTG_CONTROL_DATA: { + urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status); + if (urb_xfer_done) { + _qtd->control_phase = DWC_OTG_CONTROL_STATUS; + DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); + } else { + save_data_toggle(_hc, _hc_regs, _qtd); + } + halt_status = DWC_OTG_HC_XFER_COMPLETE; + break; + } + case DWC_OTG_CONTROL_STATUS: + DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); + if (status == -EINPROGRESS) { + status = 0; + } + dwc_otg_hcd_complete_urb(_hcd, urb, status); + halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; + break; + } + + complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, + halt_status, must_free); + break; + case PIPE_BULK: + DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); + urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status); + if (urb_xfer_done) { + dwc_otg_hcd_complete_urb(_hcd, urb, status); + halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC_OTG_HC_XFER_COMPLETE; + } + + save_data_toggle(_hc, _hc_regs, _qtd); + complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free); + break; + case PIPE_INTERRUPT: + DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); + update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status); + + /* + * Interrupt URB is done on the first transfer complete + * interrupt. + */ + dwc_otg_hcd_complete_urb(_hcd, urb, status); + save_data_toggle(_hc, _hc_regs, _qtd); + complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_URB_COMPLETE, must_free); + break; + case PIPE_ISOCHRONOUS: + DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); + if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) + { + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_COMPLETE); + } + complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free); + break; + } + + disable_hc_int(_hc_regs,xfercompl); + + return 1; +} + +/** + * Handles a host channel STALL interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, int *must_free) +{ + struct urb *urb = _qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "STALL Received--\n", _hc->hc_num); + + if (pipe_type == PIPE_CONTROL) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE); + } + + if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE); + /* + * USB protocol requires resetting the data toggle for bulk + * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) + * setup command is issued to the endpoint. Anticipate the + * CLEAR_FEATURE command since a STALL has occurred and reset + * the data toggle now. + */ + _hc->qh->data_toggle = 0; + } + + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free); + disable_hc_int(_hc_regs,stall); + + return 1; +} + +/* + * Updates the state of the URB when a transfer has been stopped due to an + * abnormal condition before the transfer completes. Modifies the + * actual_length field of the URB to reflect the number of bytes that have + * actually been transferred via the host channel. + */ +static void update_urb_state_xfer_intr(dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + struct urb *_urb, + dwc_otg_qtd_t *_qtd, + dwc_otg_halt_status_e _halt_status) +{ + uint32_t bytes_transferred = get_actual_xfer_length(_hc, _hc_regs, _qtd, + _halt_status, NULL); + _urb->actual_length += bytes_transferred; + +#ifdef DEBUG + { + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", + __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count %d\n", _hc->start_pkt_count); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n", _hc->max_packet); + DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred); + DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length %d\n", _urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffer_length %d\n", + _urb->transfer_buffer_length); + } +#endif +} + +/** + * Handles a host channel NAK interrupt. This handler may be called in either + * DMA mode or Slave mode. + */ +static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NAK Received--\n", _hc->hc_num); + + /* + * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and + * interrupt. Re-start the SSPLIT transfer. + */ + if (_hc->do_split) { + if (_hc->complete_split) { + _qtd->error_count = 0; + } + _qtd->complete_split = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free); + goto handle_nak_done; + } + + switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + if (_hcd->core_if->dma_enable && _hc->ep_is_in) { + /* + * NAK interrupts are enabled on bulk/control IN + * transfers in DMA mode for the sole purpose of + * resetting the error count after a transaction error + * occurs. The core will continue transferring data. + */ + _qtd->error_count = 0; + goto handle_nak_done; + } + + /* + * NAK interrupts normally occur during OUT transfers in DMA + * or Slave mode. For IN transfers, more requests will be + * queued as request queue space is available. + */ + _qtd->error_count = 0; + + if (!_hc->qh->ping_state) { + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, + _qtd, DWC_OTG_HC_XFER_NAK); + save_data_toggle(_hc, _hc_regs, _qtd); + if (_qtd->urb->dev->speed == USB_SPEED_HIGH) { + _hc->qh->ping_state = 1; + } + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will + * start/continue. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free); + break; + case PIPE_INTERRUPT: + _qtd->error_count = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free); + break; + case PIPE_ISOCHRONOUS: + /* Should never get called for isochronous transfers. */ + BUG(); + break; + } + + handle_nak_done: + disable_hc_int(_hc_regs,nak); + + return 1; +} + +/** + * Handles a host channel ACK interrupt. This interrupt is enabled when + * performing the PING protocol in Slave mode, when errors occur during + * either Slave mode or DMA mode, and during Start Split transactions. + */ +static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "ACK Received--\n", _hc->hc_num); + + if (_hc->do_split) { + /* + * Handle ACK on SSPLIT. + * ACK should not occur in CSPLIT. + */ + if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) { + _qtd->ssplit_out_xfer_count = _hc->xfer_len; + } + if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) { + /* Don't need complete for isochronous out transfers. */ + _qtd->complete_split = 1; + } + + /* ISOC OUT */ + if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) { + switch (_hc->xact_pos) { + case DWC_HCSPLIT_XACTPOS_ALL: + break; + case DWC_HCSPLIT_XACTPOS_END: + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + _qtd->isoc_split_offset = 0; + break; + case DWC_HCSPLIT_XACTPOS_BEGIN: + case DWC_HCSPLIT_XACTPOS_MID: + /* + * For BEGIN or MID, calculate the length for + * the next microframe to determine the correct + * SSPLIT token, either MID or END. + */ + do { + struct usb_iso_packet_descriptor *frame_desc; + + frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index]; + _qtd->isoc_split_offset += 188; + + if ((frame_desc->length - _qtd->isoc_split_offset) <= 188) { + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END; + } + else { + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID; + } + + } while(0); + break; + } + } else { + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free); + } + } else { + _qtd->error_count = 0; + + if (_hc->qh->ping_state) { + _hc->qh->ping_state = 0; + /* + * Halt the channel so the transfer can be re-started + * from the appropriate point. This only happens in + * Slave mode. In DMA mode, the ping_state is cleared + * when the transfer is started because the core + * automatically executes the PING, then the transfer. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free); + } + } + + /* + * If the ACK occurred when _not_ in the PING state, let the channel + * continue transferring data after clearing the error count. + */ + + disable_hc_int(_hc_regs,ack); + + return 1; +} + +/** + * Handles a host channel NYET interrupt. This interrupt should only occur on + * Bulk and Control OUT endpoints and for complete split transactions. If a + * NYET occurs at the same time as a Transfer Complete interrupt, it is + * handled in the xfercomp interrupt handler, not here. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NYET Received--\n", _hc->hc_num); + + /* + * NYET on CSPLIT + * re-do the CSPLIT immediately on non-periodic + */ + if ((_hc->do_split) && (_hc->complete_split)) { + if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) || + (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { + int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); + + if (dwc_full_frame_num(frnum) != + dwc_full_frame_num(_hc->qh->sched_frame)) { + /* + * No longer in the same full speed frame. + * Treat this as a transaction error. + */ +#if 0 + /** @todo Fix system performance so this can + * be treated as an error. Right now complete + * splits cannot be scheduled precisely enough + * due to other system activity, so this error + * occurs regularly in Slave mode. + */ + _qtd->error_count++; +#endif + _qtd->complete_split = 0; + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free); + /** @todo add support for isoc release */ + goto handle_nyet_done; + } + } + + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free); + goto handle_nyet_done; + } + + _hc->qh->ping_state = 1; + _qtd->error_count = 0; + + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd, + DWC_OTG_HC_XFER_NYET); + save_data_toggle(_hc, _hc_regs, _qtd); + + /* + * Halt the channel and re-start the transfer so the PING + * protocol will start. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free); + +handle_nyet_done: + disable_hc_int(_hc_regs,nyet); + clear_hc_int(_hc_regs, nyet); + return 1; +} + +/** + * Handles a host channel babble interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Babble Error--\n", _hc->hc_num); + if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW); + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free); + } else { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_BABBLE_ERR); + halt_channel(_hcd, _hc, _qtd, halt_status, must_free); + } + disable_hc_int(_hc_regs,bblerr); + return 1; +} + +/** + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t *_hc, + dwc_otg_hc_regs_t *_hc_regs, + dwc_otg_qtd_t *_qtd) +{ + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + struct urb *urb = _qtd->urb; + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "AHB Error--\n", _hc->hc_num); + + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + hcdma = dwc_read_reg32(&_hc_regs->hcdma); + + DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num); + DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); + DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe)); + DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), + (usb_pipein(urb->pipe) ? "IN" : "OUT")); + DWC_ERROR(" Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: pipetype = "CONTROL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; + default: pipetype = "UNKNOWN"; break; + }; pipetype;})); + DWC_ERROR(" Speed: %s\n", + ({char *speed; + switch (urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HIGH"; break; + case USB_SPEED_FULL: speed = "FULL"; break; + case USB_SPEED_LOW: speed = "LOW"; break; + default: speed = "UNKNOWN"; break; + }; speed;})); + DWC_ERROR(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length); + DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", + urb->transfer_buffer, (void *)(u32)urb->transfer_dma); + DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", + urb->setup_packet, (void *)(u32)urb->setup_dma); + DWC_ERROR(" Interval: %d\n", urb->interval); + + dwc_otg_hcd_complete_urb(_hcd, urb, -EIO); + + /* + * Force a channel halt. Don't call halt_channel because that won't + * write to the HCCHARn register in DMA mode to force the halt. + */ + dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR); + + disable_hc_int(_hc_regs,ahberr); + return 1; +} + +/** + * Handles a host channel transaction error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transaction Error--\n", _hc->hc_num); + + switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + _qtd->error_count++; + if (!_hc->qh->ping_state) { + update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, + _qtd, DWC_OTG_HC_XFER_XACT_ERR); + save_data_toggle(_hc, _hc_regs, _qtd); + if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) { + _hc->qh->ping_state = 1; + } + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will start. + */ + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free); + break; + case PIPE_INTERRUPT: + _qtd->error_count++; + if ((_hc->do_split) && (_hc->complete_split)) { + _qtd->complete_split = 0; + } + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free); + break; + case PIPE_ISOCHRONOUS: + { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_XACT_ERR); + + halt_channel(_hcd, _hc, _qtd, halt_status, must_free); + } + break; + } + + + disable_hc_int(_hc_regs,xacterr); + + return 1; +} + +/** + * Handles a host channel frame overrun interrupt. This handler may be called + * in either DMA mode or Slave mode. + */ +static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Frame Overrun--\n", _hc->hc_num); + + switch (usb_pipetype(_qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + break; + case PIPE_INTERRUPT: + halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free); + break; + case PIPE_ISOCHRONOUS: + { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd, + DWC_OTG_HC_XFER_FRAME_OVERRUN); + + halt_channel(_hcd, _hc, _qtd, halt_status, must_free); + } + break; + } + + disable_hc_int(_hc_regs,frmovrun); + + return 1; +} + +/** + * Handles a host channel data toggle error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Data Toggle Error--\n", _hc->hc_num); + + if (_hc->ep_is_in) { + _qtd->error_count = 0; + } else { + DWC_ERROR("Data Toggle Error on OUT transfer," + "channel %d\n", _hc->hc_num); + } + + disable_hc_int(_hc_regs,datatglerr); + + return 1; +} + +#ifdef DEBUG +/** + * This function is for debug only. It checks that a valid halt status is set + * and that HCCHARn.chdis is clear. If there's a problem, corrective action is + * taken and a warning is issued. + * @return 1 if halt status is ok, 0 otherwise. + */ +static inline int halt_status_ok(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hcsplt_data_t hcsplt; + + if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { + /* + * This code is here only as a check. This condition should + * never happen. Ignore the halt if it does occur. + */ + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz); + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk); + hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt); + DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " + "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " + "hcint 0x%08x, hcintmsk 0x%08x, " + "hcsplt 0x%08x, qtd->complete_split %d\n", + __func__, _hc->hc_num, hcchar.d32, hctsiz.d32, + hcint.d32, hcintmsk.d32, + hcsplt.d32, _qtd->complete_split); + + DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", + __func__, _hc->hc_num); + DWC_WARN("\n"); + clear_hc_int(_hc_regs,chhltd); + return 0; + } + + /* + * This code is here only as a check. hcchar.chdis should + * never be set when the halt interrupt occurs. Halt the + * channel again if it does occur. + */ + hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar); + if (hcchar.b.chdis) { + DWC_WARN("%s: hcchar.chdis set unexpectedly, " + "hcchar 0x%08x, trying to halt again\n", + __func__, hcchar.d32); + clear_hc_int(_hc_regs,chhltd); + _hc->halt_pending = 0; + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + return 0; + } + + return 1; +} +#endif + +/** + * Handles a host Channel Halted interrupt in DMA mode. This handler + * determines the reason the channel halted and proceeds accordingly. + */ +static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + + if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + /* + * Just release the channel. A dequeue can happen on a + * transfer timeout. In the case of an AHB Error, the channel + * was forced to halt because there's no way to gracefully + * recover. + */ + release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + return; + } + + /* Read the HCINTn register to determine the cause for the halt. */ + hcint.d32 = dwc_read_reg32(&_hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk); + + if (hcint.b.xfercomp) { + /** @todo This is here because of a possible hardware bug. Spec + * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT + * interrupt w/ACK bit set should occur, but I only see the + * XFERCOMP bit, even with it masked out. This is a workaround + * for that behavior. Should fix this when hardware is fixed. + */ + if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) { + handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } + handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.stall) { + handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.xacterr) { + /* + * Must handle xacterr before nak or ack. Could get a xacterr + * at the same time as either of these on a BULK/CONTROL OUT + * that started with a PING. The xacterr takes precedence. + */ + handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.nyet) { + /* + * Must handle nyet before nak or ack. Could get a nyet at the + * same time as either of those on a BULK/CONTROL OUT that + * started with a PING. The nyet takes precedence. + */ + handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.bblerr) { + handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.frmovrun) { + handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.datatglerr) { + handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + _hc->qh->data_toggle = 0; + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + } else if (hcint.b.nak && !hcintmsk.b.nak) { + /* + * If nak is not masked, it's because a non-split IN transfer + * is in an error state. In that case, the nak is handled by + * the nak interrupt handler, not here. Handle nak here for + * BULK/CONTROL OUT transfers, which halt on a NAK to allow + * rewinding the buffer pointer. + */ + handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else if (hcint.b.ack && !hcintmsk.b.ack) { + /* + * If ack is not masked, it's because a non-split IN transfer + * is in an error state. In that case, the ack is handled by + * the ack interrupt handler, not here. Handle ack here for + * split transfers. Start splits halt on ACK. + */ + handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free); + } else { + if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR || + _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * A periodic transfer halted with no other channel + * interrupts set. Assume it was halted by the core + * because it could not be completed in its scheduled + * (micro)frame. + */ +#ifdef DEBUG + DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n", + __func__, _hc->hc_num); +#endif /* */ + halt_channel(_hcd, _hc, _qtd, + DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free); + } else { +#ifdef DEBUG + DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason " + "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n", + __func__, _hc->hc_num, hcint.b.nyet, hcint.d32, + dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts)); +#endif + halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + } + } +} + +/** + * Handles a host channel Channel Halted interrupt. + * + * In slave mode, this handler is called only when the driver specifically + * requests a halt. This occurs during handling other host channel interrupts + * (e.g. nak, xacterr, stall, nyet, etc.). + * + * In DMA mode, this is the interrupt that occurs when the core has finished + * processing a transfer on a channel. Other host channel interrupts (except + * ahberr) are disabled in DMA mode. + */ +static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *_hcd, + dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Channel Halted--\n", _hc->hc_num); + + if (_hcd->core_if->dma_enable) { + handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free); + } else { +#ifdef DEBUG + if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) { + return 1; + } +#endif /* */ + release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free); + } + + return 1; +} + +/** Handles interrupt for a specific Host Channel */ +int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num) +{ + int must_free = 0; + int retval = 0; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + dwc_hc_t *hc; + dwc_otg_hc_regs_t *hc_regs; + dwc_otg_qtd_t *qtd; + + DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num); + + hc = _dwc_otg_hcd->hc_ptr_array[_num]; + hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num]; + qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); + DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32)); + hcint.d32 = hcint.d32 & hcintmsk.d32; + + if (!_dwc_otg_hcd->core_if->dma_enable) { + if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) { + hcint.b.chhltd = 0; + } + } + + if (hcint.b.xfercomp) { + retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + /* + * If NYET occurred at same time as Xfer Complete, the NYET is + * handled by the Xfer Complete interrupt handler. Don't want + * to call the NYET interrupt handler in this case. + */ + hcint.b.nyet = 0; + } + if (hcint.b.chhltd) { + retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.ahberr) { + retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.stall) { + retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.nak) { + retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.ack) { + retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.nyet) { + retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.xacterr) { + retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.bblerr) { + retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.frmovrun) { + retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + if (hcint.b.datatglerr) { + retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free); + } + + /* + * Logic to free the qtd here, at the end of the hc intr + * processing, if the handling of this interrupt determined + * that it needs to be freed. + */ + if (must_free) { + /* Free the qtd here now that we are done using it. */ + dwc_otg_hcd_qtd_free(qtd); + } + return retval; +} + +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c new file mode 100644 index 0000000000..fcb5ce634a --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c @@ -0,0 +1,794 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 537387 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the functions to manage Queue Heads and Queue + * Transfer Descriptors. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +/** + * This function allocates and initializes a QH. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param[in] _urb Holds the information about the device/endpoint that we need + * to initialize the QH. + * + * @return Returns pointer to the newly allocated QH, or NULL on error. */ +dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb) +{ + dwc_otg_qh_t *qh; + + /* Allocate memory */ + /** @todo add memflags argument */ + qh = dwc_otg_hcd_qh_alloc (); + if (qh == NULL) { + return NULL; + } + + dwc_otg_hcd_qh_init (_hcd, qh, _urb); + return qh; +} + +/** Free each QTD in the QH's QTD-list then free the QH. QH should already be + * removed from a list. QTD list should already be empty if called from URB + * Dequeue. + * + * @param[in] _qh The QH to free. + */ +void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh) +{ + dwc_otg_qtd_t *qtd; + struct list_head *pos; + unsigned long flags; + + /* Free each QTD in the QTD list */ + local_irq_save (flags); + for (pos = _qh->qtd_list.next; + pos != &_qh->qtd_list; + pos = _qh->qtd_list.next) + { + list_del (pos); + qtd = dwc_list_to_qtd (pos); + dwc_otg_hcd_qtd_free (qtd); + } + local_irq_restore (flags); + + kfree (_qh); + return; +} + +/** Initializes a QH structure. + * + * @param[in] _hcd The HCD state structure for the DWC OTG controller. + * @param[in] _qh The QH to init. + * @param[in] _urb Holds the information about the device/endpoint that we need + * to initialize the QH. */ +#define SCHEDULE_SLOP 10 +void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb) +{ + memset (_qh, 0, sizeof (dwc_otg_qh_t)); + + /* Initialize QH */ + switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: + _qh->ep_type = USB_ENDPOINT_XFER_CONTROL; + break; + case PIPE_BULK: + _qh->ep_type = USB_ENDPOINT_XFER_BULK; + break; + case PIPE_ISOCHRONOUS: + _qh->ep_type = USB_ENDPOINT_XFER_ISOC; + break; + case PIPE_INTERRUPT: + _qh->ep_type = USB_ENDPOINT_XFER_INT; + break; + } + + _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0; + + _qh->data_toggle = DWC_OTG_HC_PID_DATA0; + _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe))); + INIT_LIST_HEAD(&_qh->qtd_list); + INIT_LIST_HEAD(&_qh->qh_list_entry); + _qh->channel = NULL; + + /* FS/LS Enpoint on HS Hub + * NOT virtual root hub */ + _qh->do_split = 0; + _qh->speed = _urb->dev->speed; + if (((_urb->dev->speed == USB_SPEED_LOW) || + (_urb->dev->speed == USB_SPEED_FULL)) && + (_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) { + DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", + usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum, + _urb->dev->ttport); + _qh->do_split = 1; + } + + if (_qh->ep_type == USB_ENDPOINT_XFER_INT || + _qh->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* Compute scheduling parameters once and save them. */ + hprt0_data_t hprt; + + /** @todo Account for split transfers in the bus time. */ + int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp); + _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed, + usb_pipein(_urb->pipe), + (_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount)); + + /* Start in a slightly future (micro)frame. */ + _qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP); + _qh->interval = _urb->interval; +#if 0 + /* Increase interrupt polling rate for debugging. */ + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + _qh->interval = 8; + } +#endif + hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0); + if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && + ((_urb->dev->speed == USB_SPEED_LOW) || + (_urb->dev->speed == USB_SPEED_FULL))) + { + _qh->interval *= 8; + _qh->sched_frame |= 0x7; + _qh->start_split_frame = _qh->sched_frame; + } + } + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", _qh); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", + _urb->dev->devnum); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", + usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", + ({ char *speed; switch (_urb->dev->speed) { + case USB_SPEED_LOW: speed = "low"; break; + case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_HIGH: speed = "high"; break; + default: speed = "?"; break; + }; speed;})); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", + ({ char *type; switch (_qh->ep_type) { + case USB_ENDPOINT_XFER_ISOC: type = "isochronous"; break; + case USB_ENDPOINT_XFER_INT: type = "interrupt"; break; + case USB_ENDPOINT_XFER_CONTROL: type = "control"; break; + case USB_ENDPOINT_XFER_BULK: type = "bulk"; break; + default: type = "?"; break; + }; type;})); +#ifdef DEBUG + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", + _qh->usecs); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", + _qh->interval); + } +#endif + + return; +} + +/** + * Microframe scheduler + * track the total use in hcd->frame_usecs + * keep each qh use in qh->frame_usecs + * when surrendering the qh then donate the time back + */ +const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; + +/* + * called from dwc_otg_hcd.c:dwc_otg_hcd_init + */ +int init_hcd_usecs(dwc_otg_hcd_t *_hcd) +{ + int i; + for (i=0; i<8; i++) { + _hcd->frame_usecs[i] = max_uframe_usecs[i]; + } + return 0; +} + +static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int i; + unsigned short utime; + int t_left; + int ret; + int done; + + ret = -1; + utime = _qh->usecs; + t_left = utime; + i = 0; + done = 0; + while (done == 0) { + /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ + if (utime <= _hcd->frame_usecs[i]) { + _hcd->frame_usecs[i] -= utime; + _qh->frame_usecs[i] += utime; + t_left -= utime; + ret = i; + done = 1; + return ret; + } else { + i++; + if (i == 8) { + done = 1; + ret = -1; + } + } + } + return ret; +} + +/* + * use this for FS apps that can span multiple uframes + */ +static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int i; + int j; + unsigned short utime; + int t_left; + int ret; + int done; + unsigned short xtime; + + ret = -1; + utime = _qh->usecs; + t_left = utime; + i = 0; + done = 0; +loop: + while (done == 0) { + if(_hcd->frame_usecs[i] <= 0) { + i++; + if (i == 8) { + done = 1; + ret = -1; + } + goto loop; + } + + /* + * we need n consequtive slots + * so use j as a start slot j plus j+1 must be enough time (for now) + */ + xtime= _hcd->frame_usecs[i]; + for (j = i+1 ; j < 8 ; j++ ) { + /* + * if we add this frame remaining time to xtime we may + * be OK, if not we need to test j for a complete frame + */ + if ((xtime+_hcd->frame_usecs[j]) < utime) { + if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { + j = 8; + ret = -1; + continue; + } + } + if (xtime >= utime) { + ret = i; + j = 8; /* stop loop with a good value ret */ + continue; + } + /* add the frame time to x time */ + xtime += _hcd->frame_usecs[j]; + /* we must have a fully available next frame or break */ + if ((xtime < utime) + && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { + ret = -1; + j = 8; /* stop loop with a bad value ret */ + continue; + } + } + if (ret >= 0) { + t_left = utime; + for (j = i; (t_left>0) && (j < 8); j++ ) { + t_left -= _hcd->frame_usecs[j]; + if ( t_left <= 0 ) { + _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; + _hcd->frame_usecs[j]= -t_left; + ret = i; + done = 1; + } else { + _qh->frame_usecs[j] += _hcd->frame_usecs[j]; + _hcd->frame_usecs[j] = 0; + } + } + } else { + i++; + if (i == 8) { + done = 1; + ret = -1; + } + } + } + return ret; +} + +static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + int ret; + ret = -1; + + if (_qh->speed == USB_SPEED_HIGH) { + /* if this is a hs transaction we need a full frame */ + ret = find_single_uframe(_hcd, _qh); + } else { + /* if this is a fs transaction we may need a sequence of frames */ + ret = find_multi_uframe(_hcd, _qh); + } + return ret; +} + +/** + * Checks that the max transfer size allowed in a host channel is large enough + * to handle the maximum data transfer in a single (micro)frame for a periodic + * transfer. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH for a periodic endpoint. + * + * @return 0 if successful, negative error code otherwise. + */ +static int check_max_xfer_size(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + int status; + uint32_t max_xfer_size; + uint32_t max_channel_xfer_size; + + status = 0; + + max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp); + max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size; + + if (max_xfer_size > max_channel_xfer_size) { + DWC_NOTICE("%s: Periodic xfer length %d > " + "max xfer length for channel %d\n", + __func__, max_xfer_size, max_channel_xfer_size); + status = -ENOSPC; + } + + return status; +} + +/** + * Schedules an interrupt or isochronous transfer in the periodic schedule. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH for the periodic transfer. The QH should already contain the + * scheduling information. + * + * @return 0 if successful, negative error code otherwise. + */ +static int schedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + int status = 0; + + int frame; + status = find_uframe(_hcd, _qh); + frame = -1; + if (status == 0) { + frame = 7; + } else { + if (status > 0 ) + frame = status-1; + } + + /* Set the new frame up */ + if (frame > -1) { + _qh->sched_frame &= ~0x7; + _qh->sched_frame |= (frame & 7); + } + + if (status != -1 ) + status = 0; + if (status) { + DWC_NOTICE("%s: Insufficient periodic bandwidth for " + "periodic transfer.\n", __func__); + return status; + } + + status = check_max_xfer_size(_hcd, _qh); + if (status) { + DWC_NOTICE("%s: Channel max transfer size too small " + "for periodic transfer.\n", __func__); + return status; + } + + /* Always start in the inactive schedule. */ + list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive); + + + /* Update claimed usecs per (micro)frame. */ + _hcd->periodic_usecs += _qh->usecs; + + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += _qh->usecs / _qh->interval; + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++; + DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++; + DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } + + return status; +} + +/** + * This function adds a QH to either the non periodic or periodic schedule if + * it is not already in the schedule. If the QH is already in the schedule, no + * action is taken. + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + unsigned long flags; + int status = 0; + + local_irq_save(flags); + + if (!list_empty(&_qh->qh_list_entry)) { + /* QH already in a schedule. */ + goto done; + } + + /* Add the new QH to the appropriate schedule */ + if (dwc_qh_is_non_per(_qh)) { + /* Always start in the inactive schedule. */ + list_add_tail(&_qh->qh_list_entry, &_hcd->non_periodic_sched_inactive); + } else { + status = schedule_periodic(_hcd, _qh); + } + + done: + local_irq_restore(flags); + + return status; +} + +/** + * This function adds a QH to the non periodic deferred schedule. + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) +{ + unsigned long flags; + local_irq_save(flags); + if (!list_empty(&_qh->qh_list_entry)) { + /* QH already in a schedule. */ + goto done; + } + + /* Add the new QH to the non periodic deferred schedule */ + if (dwc_qh_is_non_per(_qh)) { + list_add_tail(&_qh->qh_list_entry, + &_hcd->non_periodic_sched_deferred); + } +done: + local_irq_restore(flags); + return 0; +} + +/** + * Removes an interrupt or isochronous transfer from the periodic schedule. + * + * @param _hcd The HCD state structure for the DWC OTG controller. + * @param _qh QH for the periodic transfer. + */ +static void deschedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + int i; + list_del_init(&_qh->qh_list_entry); + + + /* Update claimed usecs per (micro)frame. */ + _hcd->periodic_usecs -= _qh->usecs; + + for (i = 0; i < 8; i++) { + _hcd->frame_usecs[i] += _qh->frame_usecs[i]; + _qh->frame_usecs[i] = 0; + } + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval; + + if (_qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--; + DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--; + DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n", + _qh, _qh->usecs, _qh->interval); + } +} + +/** + * Removes a QH from either the non-periodic or periodic schedule. Memory is + * not freed. + * + * @param[in] _hcd The HCD state structure. + * @param[in] _qh QH to remove from schedule. */ +void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh) +{ + unsigned long flags; + + local_irq_save(flags); + + if (list_empty(&_qh->qh_list_entry)) { + /* QH is not in a schedule. */ + goto done; + } + + if (dwc_qh_is_non_per(_qh)) { + if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) { + _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next; + } + list_del_init(&_qh->qh_list_entry); + } else { + deschedule_periodic(_hcd, _qh); + } + + done: + local_irq_restore(flags); +} + +/** + * Defers a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the deferred non-periodic + * schedule if any QTDs are still attached to the QH. + */ +int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay) +{ + int deact = 1; + unsigned long flags; + local_irq_save(flags); + if (dwc_qh_is_non_per(_qh)) { + _qh->sched_frame = + dwc_frame_num_inc(_hcd->frame_number, + delay); + _qh->channel = NULL; + _qh->qtd_in_process = NULL; + deact = 0; + dwc_otg_hcd_qh_remove(_hcd, _qh); + if (!list_empty(&_qh->qtd_list)) { + /* Add back to deferred non-periodic schedule. */ + dwc_otg_hcd_qh_add_deferred(_hcd, _qh); + } + } + local_irq_restore(flags); + return deact; +} + +/** + * Deactivates a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the inactive non-periodic + * schedule if any QTDs are still attached to the QH. + * + * For periodic QHs, the QH is removed from the periodic queued schedule. If + * there are any QTDs still attached to the QH, the QH is added to either the + * periodic inactive schedule or the periodic ready schedule and its next + * scheduled frame is calculated. The QH is placed in the ready schedule if + * the scheduled frame has been reached already. Otherwise it's placed in the + * inactive schedule. If there are no QTDs attached to the QH, the QH is + * completely removed from the periodic schedule. + */ +void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_next_periodic_split) +{ + unsigned long flags; + local_irq_save(flags); + + if (dwc_qh_is_non_per(_qh)) { + dwc_otg_hcd_qh_remove(_hcd, _qh); + if (!list_empty(&_qh->qtd_list)) { + /* Add back to inactive non-periodic schedule. */ + dwc_otg_hcd_qh_add(_hcd, _qh); + } + } else { + uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd)); + + if (_qh->do_split) { + /* Schedule the next continuing periodic split transfer */ + if (sched_next_periodic_split) { + + _qh->sched_frame = frame_number; + if (dwc_frame_num_le(frame_number, + dwc_frame_num_inc(_qh->start_split_frame, 1))) { + /* + * Allow one frame to elapse after start + * split microframe before scheduling + * complete split, but DONT if we are + * doing the next start split in the + * same frame for an ISOC out. + */ + if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (_qh->ep_is_in != 0)) { + _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, 1); + } + } + } else { + _qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame, + _qh->interval); + if (dwc_frame_num_le(_qh->sched_frame, frame_number)) { + _qh->sched_frame = frame_number; + } + _qh->sched_frame |= 0x7; + _qh->start_split_frame = _qh->sched_frame; + } + } else { + _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, _qh->interval); + if (dwc_frame_num_le(_qh->sched_frame, frame_number)) { + _qh->sched_frame = frame_number; + } + } + + if (list_empty(&_qh->qtd_list)) { + dwc_otg_hcd_qh_remove(_hcd, _qh); + } else { + /* + * Remove from periodic_sched_queued and move to + * appropriate queue. + */ + if (dwc_frame_num_le(_qh->sched_frame, frame_number)) { + list_move(&_qh->qh_list_entry, + &_hcd->periodic_sched_ready); + } else { + list_move(&_qh->qh_list_entry, + &_hcd->periodic_sched_inactive); + } + } + } + + local_irq_restore(flags); +} + +/** + * This function allocates and initializes a QTD. + * + * @param[in] _urb The URB to create a QTD from. Each URB-QTD pair will end up + * pointing to each other so each pair should have a unique correlation. + * + * @return Returns pointer to the newly allocated QTD, or NULL on error. */ +dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *_urb) +{ + dwc_otg_qtd_t *qtd; + + qtd = dwc_otg_hcd_qtd_alloc (); + if (qtd == NULL) { + return NULL; + } + + dwc_otg_hcd_qtd_init (qtd, _urb); + return qtd; +} + +/** + * Initializes a QTD structure. + * + * @param[in] _qtd The QTD to initialize. + * @param[in] _urb The URB to use for initialization. */ +void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *_qtd, struct urb *_urb) +{ + memset (_qtd, 0, sizeof (dwc_otg_qtd_t)); + _qtd->urb = _urb; + if (usb_pipecontrol(_urb->pipe)) { + /* + * The only time the QTD data toggle is used is on the data + * phase of control transfers. This phase always starts with + * DATA1. + */ + _qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + _qtd->control_phase = DWC_OTG_CONTROL_SETUP; + } + + /* start split */ + _qtd->complete_split = 0; + _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + _qtd->isoc_split_offset = 0; + + /* Store the qtd ptr in the urb to reference what QTD. */ + _urb->hcpriv = _qtd; + return; +} + +/** + * This function adds a QTD to the QTD-list of a QH. It will find the correct + * QH to place the QTD into. If it does not find a QH, then it will create a + * new QH. If the QH to which the QTD is added is not currently scheduled, it + * is placed into the proper schedule based on its EP type. + * + * @param[in] _qtd The QTD to add + * @param[in] _dwc_otg_hcd The DWC HCD structure + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t * _dwc_otg_hcd) +{ + struct usb_host_endpoint *ep; + dwc_otg_qh_t *qh; + unsigned long flags; + int retval = 0; + struct urb *urb = _qtd->urb; + + local_irq_save(flags); + + /* + * Get the QH which holds the QTD-list to insert to. Create QH if it + * doesn't exist. + */ + ep = dwc_urb_to_endpoint(urb); + qh = (dwc_otg_qh_t *)ep->hcpriv; + if (qh == NULL) { + qh = dwc_otg_hcd_qh_create (_dwc_otg_hcd, urb); + if (qh == NULL) { + retval = -1; + goto done; + } + ep->hcpriv = qh; + } + + _qtd->qtd_qh_ptr = qh; + retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh); + if (retval == 0) { + list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list); + } + + done: + local_irq_restore(flags); + return retval; +} + +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_ifx.c b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_ifx.c new file mode 100644 index 0000000000..e45da853ea --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_ifx.c @@ -0,0 +1,103 @@ +/****************************************************************************** +** +** FILE NAME : dwc_otg_ifx.c +** PROJECT : Twinpass/Danube +** MODULES : DWC OTG USB +** +** DATE : 12 Auguest 2007 +** AUTHOR : Sung Winder +** DESCRIPTION : Platform specific initialization. +** COPYRIGHT : Copyright (c) 2007 +** Infineon Technologies AG +** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park, +** Hsin-chu City, 300 Taiwan. +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Date $Author $Comment +** 12 Auguest 2007 Sung Winder Initiate Version +*******************************************************************************/ +#include "dwc_otg_ifx.h" + +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/gpio.h> + +#include <asm/io.h> +//#include <asm/mach-ifxmips/ifxmips.h> +#include <lantiq_soc.h> + +#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00) + +#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010)) +#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040)) +#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014)) +#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044)) +#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018)) +#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048)) +#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C)) +#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C)) +#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020)) +#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050)) +#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024)) +#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054)) +#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028)) +#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058)) +#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C)) +#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C)) +#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030)) +#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060)) + + +#define writel ltq_w32 +#define readl ltq_r32 +void dwc_otg_power_on (void) +{ + // clear power + writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR); + // set clock gating + if (ltq_is_ase()) + writel(readl(DANUBE_CGU_IFCCR) & ~0x20, DANUBE_CGU_IFCCR); + else + writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR); + // set power + writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR); + writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR); + writel(readl(DANUBE_PMU_PWDCR) & ~0x8000, DANUBE_PMU_PWDCR); + +#if 1//defined (DWC_HOST_ONLY) + // make the hardware be a host controller (default) + //clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG); + writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_HDSEL_BIT), DANUBE_RCU_UBSCFG); + + //#elif defined (DWC_DEVICE_ONLY) + /* set the controller to the device mode */ + // set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG); +#else +#error "For Danube/Twinpass, it should be HOST or Device Only." +#endif + + // set the HC's byte-order to big-endian + //set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG); + writel(readl(DANUBE_RCU_UBSCFG) | (1<<DANUBE_USBCFG_HOST_END_BIT), DANUBE_RCU_UBSCFG); + //clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG); + writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_SLV_END_BIT), DANUBE_RCU_UBSCFG); + //writel(0x400, DANUBE_RCU_UBSCFG); + + // PHY configurations. + writel (0x14014, (volatile unsigned long *)0xbe10103c); +} + +int ifx_usb_hc_init(unsigned long base_addr, int irq) +{ + return 0; +} + +void ifx_usb_hc_remove(void) +{ +} diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_ifx.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_ifx.h new file mode 100644 index 0000000000..402d7a6540 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_ifx.h @@ -0,0 +1,85 @@ +/****************************************************************************** +** +** FILE NAME : dwc_otg_ifx.h +** PROJECT : Twinpass/Danube +** MODULES : DWC OTG USB +** +** DATE : 12 April 2007 +** AUTHOR : Sung Winder +** DESCRIPTION : Platform specific initialization. +** COPYRIGHT : Copyright (c) 2007 +** Infineon Technologies AG +** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park, +** Hsin-chu City, 300 Taiwan. +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Date $Author $Comment +** 12 April 2007 Sung Winder Initiate Version +*******************************************************************************/ +#if !defined(__DWC_OTG_IFX_H__) +#define __DWC_OTG_IFX_H__ + +#include <linux/irq.h> +#include <irq.h> + +// 20070316, winder added. +#ifndef SZ_256K +#define SZ_256K 0x00040000 +#endif + +extern void dwc_otg_power_on (void); + +/* FIXME: The current Linux-2.6 do not have these header files, but anyway, we need these. */ +// #include <asm/danube/danube.h> +// #include <asm/ifx/irq.h> + +/* winder, I used the Danube parameter as default. * + * We could change this through module param. */ +#define IFX_USB_IOMEM_BASE 0x1e101000 +#define IFX_USB_IOMEM_SIZE SZ_256K +#define IFX_USB_IRQ LTQ_USB_INT + +/** + * This function is called to set correct clock gating and power. + * For Twinpass/Danube board. + */ +#ifndef DANUBE_RCU_BASE_ADDR +#define DANUBE_RCU_BASE_ADDR (0xBF203000) +#endif + +#ifndef DANUBE_CGU +#define DANUBE_CGU (0xBF103000) +#endif +#ifndef DANUBE_CGU_IFCCR +/***CGU Interface Clock Control Register***/ +#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018)) +#endif + +#ifndef DANUBE_PMU +#define DANUBE_PMU (KSEG1+0x1F102000) +#endif +#ifndef DANUBE_PMU_PWDCR +/* PMU Power down Control Register */ +#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C)) +#endif + + +#define DANUBE_RCU_UBSCFG ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x18)) +#define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device +#define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end +#define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end + +extern void ltq_mask_and_ack_irq(struct irq_data *d); + +static void inline mask_and_ack_ifx_irq(int x) +{ + struct irq_data d; + d.irq = x; + ltq_mask_and_ack_irq(&d); +} +#endif //__DWC_OTG_IFX_H__ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_plat.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_plat.h new file mode 100644 index 0000000000..727d0c4a52 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_plat.h @@ -0,0 +1,269 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 510301 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_OTG_PLAT_H__) +#define __DWC_OTG_PLAT_H__ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <asm/io.h> + +/** + * @file + * + * This file contains the Platform Specific constants, interfaces + * (functions and macros) for Linux. + * + */ +/*#if !defined(__LINUX__) +#error "The contents of this file is Linux specific!!!" +#endif +*/ +#include <lantiq_soc.h> +#define writel ltq_w32 +#define readl ltq_r32 + +/** + * Reads the content of a register. + * + * @param _reg address of register to read. + * @return contents of the register. + * + + * Usage:<br> + * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code> + */ +static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg) +{ + return readl(_reg); +}; + +/** + * Writes a register with a 32 bit value. + * + * @param _reg address of register to read. + * @param _value to write to _reg. + * + * Usage:<br> + * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code> + */ +static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value) +{ + writel( _value, _reg ); +}; + +/** + * This function modifies bit values in a register. Using the + * algorithm: (reg_contents & ~clear_mask) | set_mask. + * + * @param _reg address of register to read. + * @param _clear_mask bit mask to be cleared. + * @param _set_mask bit mask to be set. + * + * Usage:<br> + * <code> // Clear the SOF Interrupt Mask bit and <br> + * // set the OTG Interrupt mask bit, leaving all others as they were. + * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code> + */ +static __inline__ + void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask) +{ + writel( (readl(_reg) & ~_clear_mask) | _set_mask, _reg ); +}; + + +/** + * Wrapper for the OS micro-second delay function. + * @param[in] _usecs Microseconds of delay + */ +static __inline__ void UDELAY( const uint32_t _usecs ) +{ + udelay( _usecs ); +} + +/** + * Wrapper for the OS milli-second delay function. + * @param[in] _msecs milliseconds of delay + */ +static __inline__ void MDELAY( const uint32_t _msecs ) +{ + mdelay( _msecs ); +} + +/** + * Wrapper for the Linux spin_lock. On the ARM (Integrator) + * spin_lock() is a nop. + * + * @param _lock Pointer to the spinlock. + */ +static __inline__ void SPIN_LOCK( spinlock_t *_lock ) +{ + spin_lock(_lock); +} + +/** + * Wrapper for the Linux spin_unlock. On the ARM (Integrator) + * spin_lock() is a nop. + * + * @param _lock Pointer to the spinlock. + */ +static __inline__ void SPIN_UNLOCK( spinlock_t *_lock ) +{ + spin_unlock(_lock); +} + +/** + * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM + * (Integrator) spin_lock() is a nop. + * + * @param _l Pointer to the spinlock. + * @param _f unsigned long for irq flags storage. + */ +#define SPIN_LOCK_IRQSAVE( _l, _f ) { \ + spin_lock_irqsave(_l,_f); \ + } + +/** + * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM + * (Integrator) spin_lock() is a nop. + * + * @param _l Pointer to the spinlock. + * @param _f unsigned long for irq flags storage. + */ +#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\ + spin_unlock_irqrestore(_l,_f); \ + } + + +/* + * Debugging support vanishes in non-debug builds. + */ + + +/** + * The Debug Level bit-mask variable. + */ +extern uint32_t g_dbg_lvl; +/** + * Set the Debug Level variable. + */ +static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new ) +{ + uint32_t old = g_dbg_lvl; + g_dbg_lvl = _new; + return old; +} + +/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ +#define DBG_CIL (0x2) +/** When debug level has the DBG_CILV bit set, display CIL Verbose debug + * messages */ +#define DBG_CILV (0x20) +/** When debug level has the DBG_PCD bit set, display PCD (Device) debug + * messages */ +#define DBG_PCD (0x4) +/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug + * messages */ +#define DBG_PCDV (0x40) +/** When debug level has the DBG_HCD bit set, display Host debug messages */ +#define DBG_HCD (0x8) +/** When debug level has the DBG_HCDV bit set, display Verbose Host debug + * messages */ +#define DBG_HCDV (0x80) +/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host + * mode. */ +#define DBG_HCD_URB (0x800) + +/** When debug level has any bit set, display debug messages */ +#define DBG_ANY (0xFF) + +/** All debug messages off */ +#define DBG_OFF 0 + +/** Prefix string for DWC_DEBUG print macros. */ +#define USB_DWC "DWC_otg: " + +/** + * Print a debug message when the Global debug level variable contains + * the bit defined in <code>lvl</code>. + * + * @param[in] lvl - Debug level, use one of the DBG_ constants above. + * @param[in] x - like printf + * + * Example:<p> + * <code> + * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); + * </code> + * <br> + * results in:<br> + * <code> + * usb-DWC_otg: dwc_otg_cil_init(ca867000) + * </code> + */ +#ifdef DEBUG + +# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0) +# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) + +# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) + +#else + +# define DWC_DEBUGPL(lvl, x...) do{}while(0) +# define DWC_DEBUGP(x...) + +# define CHK_DEBUG_LEVEL(level) (0) + +#endif /*DEBUG*/ + +/** + * Print an Error message. + */ +#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x ) +/** + * Print a Warning message. + */ +#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x ) +/** + * Print a notice (normal but significant message). + */ +#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x ) +/** + * Basic message printing. + */ +#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x ) + +#endif + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_regs.h b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_regs.h new file mode 100644 index 0000000000..397a954f39 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/dwc_otg/dwc_otg_regs.h @@ -0,0 +1,1797 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_regs.h $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 631780 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef __DWC_OTG_REGS_H__ +#define __DWC_OTG_REGS_H__ + +/** + * @file + * + * This file contains the data structures for accessing the DWC_otg core registers. + * + * The application interfaces with the HS OTG core by reading from and + * writing to the Control and Status Register (CSR) space through the + * AHB Slave interface. These registers are 32 bits wide, and the + * addresses are 32-bit-block aligned. + * CSRs are classified as follows: + * - Core Global Registers + * - Device Mode Registers + * - Device Global Registers + * - Device Endpoint Specific Registers + * - Host Mode Registers + * - Host Global Registers + * - Host Port CSRs + * - Host Channel Specific Registers + * + * Only the Core Global registers can be accessed in both Device and + * Host modes. When the HS OTG core is operating in one mode, either + * Device or Host, the application must not access registers from the + * other mode. When the core switches from one mode to another, the + * registers in the new mode of operation must be reprogrammed as they + * would be after a power-on reset. + */ + +/****************************************************************************/ +/** DWC_otg Core registers . + * The dwc_otg_core_global_regs structure defines the size + * and relative field offsets for the Core Global registers. + */ +typedef struct dwc_otg_core_global_regs +{ + /** OTG Control and Status Register. <i>Offset: 000h</i> */ + volatile uint32_t gotgctl; + /** OTG Interrupt Register. <i>Offset: 004h</i> */ + volatile uint32_t gotgint; + /**Core AHB Configuration Register. <i>Offset: 008h</i> */ + volatile uint32_t gahbcfg; +#define DWC_GLBINTRMASK 0x0001 +#define DWC_DMAENABLE 0x0020 +#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 +#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 +#define DWC_PTXEMPTYLVL_EMPTY 0x0100 +#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 + + + /**Core USB Configuration Register. <i>Offset: 00Ch</i> */ + volatile uint32_t gusbcfg; + /**Core Reset Register. <i>Offset: 010h</i> */ + volatile uint32_t grstctl; + /**Core Interrupt Register. <i>Offset: 014h</i> */ + volatile uint32_t gintsts; + /**Core Interrupt Mask Register. <i>Offset: 018h</i> */ + volatile uint32_t gintmsk; + /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */ + volatile uint32_t grxstsr; + /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/ + volatile uint32_t grxstsp; + /**Receive FIFO Size Register. <i>Offset: 024h</i> */ + volatile uint32_t grxfsiz; + /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */ + volatile uint32_t gnptxfsiz; + /**Non Periodic Transmit FIFO/Queue Status Register (Read + * Only). <i>Offset: 02Ch</i> */ + volatile uint32_t gnptxsts; + /**I2C Access Register. <i>Offset: 030h</i> */ + volatile uint32_t gi2cctl; + /**PHY Vendor Control Register. <i>Offset: 034h</i> */ + volatile uint32_t gpvndctl; + /**General Purpose Input/Output Register. <i>Offset: 038h</i> */ + volatile uint32_t ggpio; + /**User ID Register. <i>Offset: 03Ch</i> */ + volatile uint32_t guid; + /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */ + volatile uint32_t gsnpsid; + /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */ + volatile uint32_t ghwcfg1; + /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */ + volatile uint32_t ghwcfg2; +#define DWC_SLAVE_ONLY_ARCH 0 +#define DWC_EXT_DMA_ARCH 1 +#define DWC_INT_DMA_ARCH 2 + +#define DWC_MODE_HNP_SRP_CAPABLE 0 +#define DWC_MODE_SRP_ONLY_CAPABLE 1 +#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 +#define DWC_MODE_SRP_CAPABLE_DEVICE 3 +#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define DWC_MODE_SRP_CAPABLE_HOST 5 +#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 + + /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */ + volatile uint32_t ghwcfg3; + /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/ + volatile uint32_t ghwcfg4; + /** Reserved <i>Offset: 054h-0FFh</i> */ + uint32_t reserved[43]; + /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */ + volatile uint32_t hptxfsiz; + /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, + otherwise Device Transmit FIFO#n Register. + * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */ + //volatile uint32_t dptxfsiz[15]; + volatile uint32_t dptxfsiz_dieptxf[15]; +} dwc_otg_core_global_regs_t; + +/** + * This union represents the bit fields of the Core OTG Control + * and Status Register (GOTGCTL). Set the bits using the bit + * fields then write the <i>d32</i> value to the register. + */ +typedef union gotgctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned reserved31_21 : 11; + unsigned currmod : 1; + unsigned bsesvld : 1; + unsigned asesvld : 1; + unsigned reserved17 : 1; + unsigned conidsts : 1; + unsigned reserved15_12 : 4; + unsigned devhnpen : 1; + unsigned hstsethnpen : 1; + unsigned hnpreq : 1; + unsigned hstnegscs : 1; + unsigned reserved7_2 : 6; + unsigned sesreq : 1; + unsigned sesreqscs : 1; + } b; +} gotgctl_data_t; + +/** + * This union represents the bit fields of the Core OTG Interrupt Register + * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i> + * value to the register. + */ +typedef union gotgint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Current Mode */ + unsigned reserved31_20 : 12; + /** Debounce Done */ + unsigned debdone : 1; + /** A-Device Timeout Change */ + unsigned adevtoutchng : 1; + /** Host Negotiation Detected */ + unsigned hstnegdet : 1; + unsigned reserver16_10 : 7; + /** Host Negotiation Success Status Change */ + unsigned hstnegsucstschng : 1; + /** Session Request Success Status Change */ + unsigned sesreqsucstschng : 1; + unsigned reserved3_7 : 5; + /** Session End Detected */ + unsigned sesenddet : 1; + /** Current Mode */ + unsigned reserved1_0 : 2; + } b; +} gotgint_data_t; + + +/** + * This union represents the bit fields of the Core AHB Configuration + * Register (GAHBCFG). Set/clear the bits using the bit fields then + * write the <i>d32</i> value to the register. + */ +typedef union gahbcfg_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { +#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 +#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 + unsigned reserved9_31 : 23; + unsigned ptxfemplvl : 1; + unsigned nptxfemplvl_txfemplvl : 1; +#define DWC_GAHBCFG_DMAENABLE 1 + unsigned reserved : 1; + unsigned dmaenable : 1; +#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 + unsigned hburstlen : 4; + unsigned glblintrmsk : 1; +#define DWC_GAHBCFG_GLBINT_ENABLE 1 + + } b; +} gahbcfg_data_t; + +/** + * This union represents the bit fields of the Core USB Configuration + * Register (GUSBCFG). Set the bits using the bit fields then write + * the <i>d32</i> value to the register. + */ +typedef union gusbcfg_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned corrupt_tx_packet: 1; /*fscz*/ + unsigned force_device_mode: 1; + unsigned force_host_mode: 1; + unsigned reserved23_28 : 6; + unsigned term_sel_dl_pulse : 1; + unsigned ulpi_int_vbus_indicator : 1; + unsigned ulpi_ext_vbus_drv : 1; + unsigned ulpi_clk_sus_m : 1; + unsigned ulpi_auto_res : 1; + unsigned ulpi_fsls : 1; + unsigned otgutmifssel : 1; + unsigned phylpwrclksel : 1; + unsigned nptxfrwnden : 1; + unsigned usbtrdtim : 4; + unsigned hnpcap : 1; + unsigned srpcap : 1; + unsigned ddrsel : 1; + unsigned physel : 1; + unsigned fsintf : 1; + unsigned ulpi_utmi_sel : 1; + unsigned phyif : 1; + unsigned toutcal : 3; + } b; +} gusbcfg_data_t; + +/** + * This union represents the bit fields of the Core Reset Register + * (GRSTCTL). Set/clear the bits using the bit fields then write the + * <i>d32</i> value to the register. + */ +typedef union grstctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** AHB Master Idle. Indicates the AHB Master State + * Machine is in IDLE condition. */ + unsigned ahbidle : 1; + /** DMA Request Signal. Indicated DMA request is in + * probress. Used for debug purpose. */ + unsigned dmareq : 1; + /** Reserved */ + unsigned reserved29_11 : 19; + /** TxFIFO Number (TxFNum) (Device and Host). + * + * This is the FIFO number which needs to be flushed, + * using the TxFIFO Flush bit. This field should not + * be changed until the TxFIFO Flush bit is cleared by + * the core. + * - 0x0 : Non Periodic TxFIFO Flush + * - 0x1 : Periodic TxFIFO #1 Flush in device mode + * or Periodic TxFIFO in host mode + * - 0x2 : Periodic TxFIFO #2 Flush in device mode. + * - ... + * - 0xF : Periodic TxFIFO #15 Flush in device mode + * - 0x10: Flush all the Transmit NonPeriodic and + * Transmit Periodic FIFOs in the core + */ + unsigned txfnum : 5; + /** TxFIFO Flush (TxFFlsh) (Device and Host). + * + * This bit is used to selectively flush a single or + * all transmit FIFOs. The application must first + * ensure that the core is not in the middle of a + * transaction. <p>The application should write into + * this bit, only after making sure that neither the + * DMA engine is writing into the TxFIFO nor the MAC + * is reading the data out of the FIFO. <p>The + * application should wait until the core clears this + * bit, before performing any operations. This bit + * will takes 8 clocks (slowest of PHY or AHB clock) + * to clear. + */ + unsigned txfflsh : 1; + /** RxFIFO Flush (RxFFlsh) (Device and Host) + * + * The application can flush the entire Receive FIFO + * using this bit. <p>The application must first + * ensure that the core is not in the middle of a + * transaction. <p>The application should write into + * this bit, only after making sure that neither the + * DMA engine is reading from the RxFIFO nor the MAC + * is writing the data in to the FIFO. <p>The + * application should wait until the bit is cleared + * before performing any other operations. This bit + * will takes 8 clocks (slowest of PHY or AHB clock) + * to clear. + */ + unsigned rxfflsh : 1; + /** In Token Sequence Learning Queue Flush + * (INTknQFlsh) (Device Only) + */ + unsigned intknqflsh : 1; + /** Host Frame Counter Reset (Host Only)<br> + * + * The application can reset the (micro)frame number + * counter inside the core, using this bit. When the + * (micro)frame counter is reset, the subsequent SOF + * sent out by the core, will have a (micro)frame + * number of 0. + */ + unsigned hstfrm : 1; + /** Hclk Soft Reset + * + * The application uses this bit to reset the control logic in + * the AHB clock domain. Only AHB clock domain pipelines are + * reset. + */ + unsigned hsftrst : 1; + /** Core Soft Reset (CSftRst) (Device and Host) + * + * The application can flush the control logic in the + * entire core using this bit. This bit resets the + * pipelines in the AHB Clock domain as well as the + * PHY Clock domain. + * + * The state machines are reset to an IDLE state, the + * control bits in the CSRs are cleared, all the + * transmit FIFOs and the receive FIFO are flushed. + * + * The status mask bits that control the generation of + * the interrupt, are cleared, to clear the + * interrupt. The interrupt status bits are not + * cleared, so the application can get the status of + * any events that occurred in the core after it has + * set this bit. + * + * Any transactions on the AHB are terminated as soon + * as possible following the protocol. Any + * transactions on the USB are terminated immediately. + * + * The configuration settings in the CSRs are + * unchanged, so the software doesn't have to + * reprogram these registers (Device + * Configuration/Host Configuration/Core System + * Configuration/Core PHY Configuration). + * + * The application can write to this bit, any time it + * wants to reset the core. This is a self clearing + * bit and the core clears this bit after all the + * necessary logic is reset in the core, which may + * take several clocks, depending on the current state + * of the core. + */ + unsigned csftrst : 1; + } b; +} grstctl_t; + + +/** + * This union represents the bit fields of the Core Interrupt Mask + * Register (GINTMSK). Set/clear the bits using the bit fields then + * write the <i>d32</i> value to the register. + */ +typedef union gintmsk_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned wkupintr : 1; + unsigned sessreqintr : 1; + unsigned disconnect : 1; + unsigned conidstschng : 1; + unsigned reserved27 : 1; + unsigned ptxfempty : 1; + unsigned hcintr : 1; + unsigned portintr : 1; + unsigned reserved22_23 : 2; + unsigned incomplisoout : 1; + unsigned incomplisoin : 1; + unsigned outepintr : 1; + unsigned inepintr : 1; + unsigned epmismatch : 1; + unsigned reserved16 : 1; + unsigned eopframe : 1; + unsigned isooutdrop : 1; + unsigned enumdone : 1; + unsigned usbreset : 1; + unsigned usbsuspend : 1; + unsigned erlysuspend : 1; + unsigned i2cintr : 1; + unsigned reserved8 : 1; + unsigned goutnakeff : 1; + unsigned ginnakeff : 1; + unsigned nptxfempty : 1; + unsigned rxstsqlvl : 1; + unsigned sofintr : 1; + unsigned otgintr : 1; + unsigned modemismatch : 1; + unsigned reserved0 : 1; + } b; +} gintmsk_data_t; +/** + * This union represents the bit fields of the Core Interrupt Register + * (GINTSTS). Set/clear the bits using the bit fields then write the + * <i>d32</i> value to the register. + */ +typedef union gintsts_data +{ + /** raw register data */ + uint32_t d32; +#define DWC_SOF_INTR_MASK 0x0008 + /** register bits */ + struct + { +#define DWC_HOST_MODE 1 + unsigned wkupintr : 1; + unsigned sessreqintr : 1; + unsigned disconnect : 1; + unsigned conidstschng : 1; + unsigned reserved27 : 1; + unsigned ptxfempty : 1; + unsigned hcintr : 1; + unsigned portintr : 1; + unsigned reserved22_23 : 2; + unsigned incomplisoout : 1; + unsigned incomplisoin : 1; + unsigned outepintr : 1; + unsigned inepint: 1; + unsigned epmismatch : 1; + unsigned intokenrx : 1; + unsigned eopframe : 1; + unsigned isooutdrop : 1; + unsigned enumdone : 1; + unsigned usbreset : 1; + unsigned usbsuspend : 1; + unsigned erlysuspend : 1; + unsigned i2cintr : 1; + unsigned reserved8 : 1; + unsigned goutnakeff : 1; + unsigned ginnakeff : 1; + unsigned nptxfempty : 1; + unsigned rxstsqlvl : 1; + unsigned sofintr : 1; + unsigned otgintr : 1; + unsigned modemismatch : 1; + unsigned curmode : 1; + } b; +} gintsts_data_t; + + +/** + * This union represents the bit fields in the Device Receive Status Read and + * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> + * element then read out the bits using the <i>b</i>it elements. + */ +typedef union device_grxsts_data { + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 7; + unsigned fn : 4; +#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet +#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete + +#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK +#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete +#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet + unsigned pktsts : 4; + unsigned dpid : 2; + unsigned bcnt : 11; + unsigned epnum : 4; + } b; +} device_grxsts_data_t; + +/** + * This union represents the bit fields in the Host Receive Status Read and + * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> + * element then read out the bits using the <i>b</i>it elements. + */ +typedef union host_grxsts_data { + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved31_21 : 11; +#define DWC_GRXSTS_PKTSTS_IN 0x2 +#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 +#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 +#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 + unsigned pktsts : 4; + unsigned dpid : 2; + unsigned bcnt : 11; + unsigned chnum : 4; + } b; +} host_grxsts_data_t; + +/** + * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, + * GNPTXFSIZ, DPTXFSIZn). Read the register into the <i>d32</i> element then + * read out the bits using the <i>b</i>it elements. + */ +typedef union fifosize_data { + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned depth : 16; + unsigned startaddr : 16; + } b; +} fifosize_data_t; + +/** + * This union represents the bit fields in the Non-Periodic Transmit + * FIFO/Queue Status Register (GNPTXSTS). Read the register into the + * <i>d32</i> element then read out the bits using the <i>b</i>it + * elements. + */ +typedef union gnptxsts_data { + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 1; + /** Top of the Non-Periodic Transmit Request Queue + * - bits 30:27 - Channel/EP Number + * - bits 26:25 - Token Type + * - bit 24 - Terminate (Last entry for the selected + * channel/EP) + * - 2'b00 - IN/OUT + * - 2'b01 - Zero Length OUT + * - 2'b10 - PING/Complete Split + * - 2'b11 - Channel Halt + + */ + unsigned nptxqtop_chnep : 4; + unsigned nptxqtop_token : 2; + unsigned nptxqtop_terminate : 1; + unsigned nptxqspcavail : 8; + unsigned nptxfspcavail : 16; + } b; +} gnptxsts_data_t; + +/** + * This union represents the bit fields in the Transmit + * FIFO Status Register (DTXFSTS). Read the register into the + * <i>d32</i> element then read out the bits using the <i>b</i>it + * elements. + */ +typedef union dtxfsts_data /* fscz */ //* +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 16; + unsigned txfspcavail : 16; + } b; +} dtxfsts_data_t; + +/** + * This union represents the bit fields in the I2C Control Register + * (I2CCTL). Read the register into the <i>d32</i> element then read out the + * bits using the <i>b</i>it elements. + */ +typedef union gi2cctl_data { + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned bsydne : 1; + unsigned rw : 1; + unsigned reserved : 2; + unsigned i2cdevaddr : 2; + unsigned i2csuspctl : 1; + unsigned ack : 1; + unsigned i2cen : 1; + unsigned addr : 7; + unsigned regaddr : 8; + unsigned rwdata : 8; + } b; +} gi2cctl_data_t; + +/** + * This union represents the bit fields in the User HW Config1 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg1_data { + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned ep_dir15 : 2; + unsigned ep_dir14 : 2; + unsigned ep_dir13 : 2; + unsigned ep_dir12 : 2; + unsigned ep_dir11 : 2; + unsigned ep_dir10 : 2; + unsigned ep_dir9 : 2; + unsigned ep_dir8 : 2; + unsigned ep_dir7 : 2; + unsigned ep_dir6 : 2; + unsigned ep_dir5 : 2; + unsigned ep_dir4 : 2; + unsigned ep_dir3 : 2; + unsigned ep_dir2 : 2; + unsigned ep_dir1 : 2; + unsigned ep_dir0 : 2; + } b; +} hwcfg1_data_t; + +/** + * This union represents the bit fields in the User HW Config2 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg2_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /* GHWCFG2 */ + unsigned reserved31 : 1; + unsigned dev_token_q_depth : 5; + unsigned host_perio_tx_q_depth : 2; + unsigned nonperio_tx_q_depth : 2; + unsigned rx_status_q_depth : 2; + unsigned dynamic_fifo : 1; + unsigned perio_ep_supported : 1; + unsigned num_host_chan : 4; + unsigned num_dev_ep : 4; + unsigned fs_phy_type : 2; +#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 +#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 +#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 + unsigned hs_phy_type : 2; + unsigned point2point : 1; + unsigned architecture : 2; +#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 +#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 +#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 +#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 + unsigned op_mode : 3; + } b; +} hwcfg2_data_t; + +/** + * This union represents the bit fields in the User HW Config3 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg3_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /* GHWCFG3 */ + unsigned dfifo_depth : 16; + unsigned reserved15_13 : 3; + unsigned ahb_phy_clock_synch : 1; + unsigned synch_reset_type : 1; + unsigned optional_features : 1; + unsigned vendor_ctrl_if : 1; + unsigned i2c : 1; + unsigned otg_func : 1; + unsigned packet_size_cntr_width : 3; + unsigned xfer_size_cntr_width : 4; + } b; +} hwcfg3_data_t; + +/** + * This union represents the bit fields in the User HW Config4 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg4_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { +unsigned reserved31_30 : 2; /* fscz */ + unsigned num_in_eps : 4; + unsigned ded_fifo_en : 1; + + unsigned session_end_filt_en : 1; + unsigned b_valid_filt_en : 1; + unsigned a_valid_filt_en : 1; + unsigned vbus_valid_filt_en : 1; + unsigned iddig_filt_en : 1; + unsigned num_dev_mode_ctrl_ep : 4; + unsigned utmi_phy_data_width : 2; + unsigned min_ahb_freq : 9; + unsigned power_optimiz : 1; + unsigned num_dev_perio_in_ep : 4; + } b; +} hwcfg4_data_t; + +//////////////////////////////////////////// +// Device Registers +/** + * Device Global Registers. <i>Offsets 800h-BFFh</i> + * + * The following structures define the size and relative field offsets + * for the Device Mode Registers. + * + * <i>These registers are visible only in Device mode and must not be + * accessed in Host mode, as the results are unknown.</i> + */ +typedef struct dwc_otg_dev_global_regs +{ + /** Device Configuration Register. <i>Offset 800h</i> */ + volatile uint32_t dcfg; + /** Device Control Register. <i>Offset: 804h</i> */ + volatile uint32_t dctl; + /** Device Status Register (Read Only). <i>Offset: 808h</i> */ + volatile uint32_t dsts; + /** Reserved. <i>Offset: 80Ch</i> */ + uint32_t unused; + /** Device IN Endpoint Common Interrupt Mask + * Register. <i>Offset: 810h</i> */ + volatile uint32_t diepmsk; + /** Device OUT Endpoint Common Interrupt Mask + * Register. <i>Offset: 814h</i> */ + volatile uint32_t doepmsk; + /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */ + volatile uint32_t daint; + /** Device All Endpoints Interrupt Mask Register. <i>Offset: + * 81Ch</i> */ + volatile uint32_t daintmsk; + /** Device IN Token Queue Read Register-1 (Read Only). + * <i>Offset: 820h</i> */ + volatile uint32_t dtknqr1; + /** Device IN Token Queue Read Register-2 (Read Only). + * <i>Offset: 824h</i> */ + volatile uint32_t dtknqr2; + /** Device VBUS discharge Register. <i>Offset: 828h</i> */ + volatile uint32_t dvbusdis; + /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */ + volatile uint32_t dvbuspulse; + /** Device IN Token Queue Read Register-3 (Read Only). + * Device Thresholding control register (Read/Write) + * <i>Offset: 830h</i> */ + volatile uint32_t dtknqr3_dthrctl; + /** Device IN Token Queue Read Register-4 (Read Only). / + * Device IN EPs empty Inr. Mask Register (Read/Write) + * <i>Offset: 834h</i> */ + volatile uint32_t dtknqr4_fifoemptymsk; +} dwc_otg_device_global_regs_t; + +/** + * This union represents the bit fields in the Device Configuration + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. Write the + * <i>d32</i> member to the dcfg register. + */ +typedef union dcfg_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved31_23 : 9; + /** In Endpoint Mis-match count */ + unsigned epmscnt : 5; + unsigned reserved13_17 : 5; + /** Periodic Frame Interval */ +#define DWC_DCFG_FRAME_INTERVAL_80 0 +#define DWC_DCFG_FRAME_INTERVAL_85 1 +#define DWC_DCFG_FRAME_INTERVAL_90 2 +#define DWC_DCFG_FRAME_INTERVAL_95 3 + unsigned perfrint : 2; + /** Device Addresses */ + unsigned devaddr : 7; + unsigned reserved3 : 1; + /** Non Zero Length Status OUT Handshake */ +#define DWC_DCFG_SEND_STALL 1 + unsigned nzstsouthshk : 1; + /** Device Speed */ + unsigned devspd : 2; + } b; +} dcfg_data_t; + +/** + * This union represents the bit fields in the Device Control + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union dctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 20; + /** Power-On Programming Done */ + unsigned pwronprgdone : 1; + /** Clear Global OUT NAK */ + unsigned cgoutnak : 1; + /** Set Global OUT NAK */ + unsigned sgoutnak : 1; + /** Clear Global Non-Periodic IN NAK */ + unsigned cgnpinnak : 1; + /** Set Global Non-Periodic IN NAK */ + unsigned sgnpinnak : 1; + /** Test Control */ + unsigned tstctl : 3; + /** Global OUT NAK Status */ + unsigned goutnaksts : 1; + /** Global Non-Periodic IN NAK Status */ + unsigned gnpinnaksts : 1; + /** Soft Disconnect */ + unsigned sftdiscon : 1; + /** Remote Wakeup */ + unsigned rmtwkupsig : 1; + } b; +} dctl_data_t; + +/** + * This union represents the bit fields in the Device Status + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union dsts_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved22_31 : 10; + /** Frame or Microframe Number of the received SOF */ + unsigned soffn : 14; + unsigned reserved4_7: 4; + /** Erratic Error */ + unsigned errticerr : 1; + /** Enumerated Speed */ +#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 +#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 +#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 +#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 + unsigned enumspd : 2; + /** Suspend Status */ + unsigned suspsts : 1; + } b; +} dsts_data_t; + + +/** + * This union represents the bit fields in the Device IN EP Interrupt + * Register and the Device IN EP Common Mask Register. + * + * - Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union diepint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved07_31 : 23; + unsigned txfifoundrn : 1; + /** IN Endpoint HAK Effective mask */ + unsigned emptyintr : 1; + /** IN Endpoint NAK Effective mask */ + unsigned inepnakeff : 1; + /** IN Token Received with EP mismatch mask */ + unsigned intknepmis : 1; + /** IN Token received with TxF Empty mask */ + unsigned intktxfemp : 1; + /** TimeOUT Handshake mask (non-ISOC EPs) */ + unsigned timeout : 1; + /** AHB Error mask */ + unsigned ahberr : 1; + /** Endpoint disable mask */ + unsigned epdisabled : 1; + /** Transfer complete mask */ + unsigned xfercompl : 1; + } b; +} diepint_data_t; +/** + * This union represents the bit fields in the Device IN EP Common + * Interrupt Mask Register. + */ +typedef union diepint_data diepmsk_data_t; + +/** + * This union represents the bit fields in the Device OUT EP Interrupt + * Registerand Device OUT EP Common Interrupt Mask Register. + * + * - Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union doepint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved04_31 : 27; + /** OUT Token Received when Endpoint Disabled */ + unsigned outtknepdis : 1; + /** Setup Phase Done (contorl EPs) */ + unsigned setup : 1; + /** AHB Error */ + unsigned ahberr : 1; + /** Endpoint disable */ + unsigned epdisabled : 1; + /** Transfer complete */ + unsigned xfercompl : 1; + } b; +} doepint_data_t; +/** + * This union represents the bit fields in the Device OUT EP Common + * Interrupt Mask Register. + */ +typedef union doepint_data doepmsk_data_t; + + +/** + * This union represents the bit fields in the Device All EP Interrupt + * and Mask Registers. + * - Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union daint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** OUT Endpoint bits */ + unsigned out : 16; + /** IN Endpoint bits */ + unsigned in : 16; + } ep; + struct { + /** OUT Endpoint bits */ + unsigned outep15 : 1; + unsigned outep14 : 1; + unsigned outep13 : 1; + unsigned outep12 : 1; + unsigned outep11 : 1; + unsigned outep10 : 1; + unsigned outep9 : 1; + unsigned outep8 : 1; + unsigned outep7 : 1; + unsigned outep6 : 1; + unsigned outep5 : 1; + unsigned outep4 : 1; + unsigned outep3 : 1; + unsigned outep2 : 1; + unsigned outep1 : 1; + unsigned outep0 : 1; + /** IN Endpoint bits */ + unsigned inep15 : 1; + unsigned inep14 : 1; + unsigned inep13 : 1; + unsigned inep12 : 1; + unsigned inep11 : 1; + unsigned inep10 : 1; + unsigned inep9 : 1; + unsigned inep8 : 1; + unsigned inep7 : 1; + unsigned inep6 : 1; + unsigned inep5 : 1; + unsigned inep4 : 1; + unsigned inep3 : 1; + unsigned inep2 : 1; + unsigned inep1 : 1; + unsigned inep0 : 1; + } b; +} daint_data_t; + +/** + * This union represents the bit fields in the Device IN Token Queue + * Read Registers. + * - Read the register into the <i>d32</i> member. + * - READ-ONLY Register + */ +typedef union dtknq1_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** EP Numbers of IN Tokens 0 ... 4 */ + unsigned epnums0_5 : 24; + /** write pointer has wrapped. */ + unsigned wrap_bit : 1; + /** Reserved */ + unsigned reserved05_06 : 2; + /** In Token Queue Write Pointer */ + unsigned intknwptr : 5; + }b; +} dtknq1_data_t; + +/** + * This union represents Threshold control Register + * - Read and write the register into the <i>d32</i> member. + * - READ-WRITABLE Register + */ +typedef union dthrctl_data //* /*fscz */ +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** Reserved */ + unsigned reserved26_31 : 6; + /** Rx Thr. Length */ + unsigned rx_thr_len : 9; + /** Rx Thr. Enable */ + unsigned rx_thr_en : 1; + /** Reserved */ + unsigned reserved11_15 : 5; + /** Tx Thr. Length */ + unsigned tx_thr_len : 9; + /** ISO Tx Thr. Enable */ + unsigned iso_thr_en : 1; + /** non ISO Tx Thr. Enable */ + unsigned non_iso_thr_en : 1; + + }b; +} dthrctl_data_t; + +/** + * Device Logical IN Endpoint-Specific Registers. <i>Offsets + * 900h-AFCh</i> + * + * There will be one set of endpoint registers per logical endpoint + * implemented. + * + * <i>These registers are visible only in Device mode and must not be + * accessed in Host mode, as the results are unknown.</i> + */ +typedef struct dwc_otg_dev_in_ep_regs +{ + /** Device IN Endpoint Control Register. <i>Offset:900h + + * (ep_num * 20h) + 00h</i> */ + volatile uint32_t diepctl; + /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */ + uint32_t reserved04; + /** Device IN Endpoint Interrupt Register. <i>Offset:900h + + * (ep_num * 20h) + 08h</i> */ + volatile uint32_t diepint; + /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */ + uint32_t reserved0C; + /** Device IN Endpoint Transfer Size + * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */ + volatile uint32_t dieptsiz; + /** Device IN Endpoint DMA Address Register. <i>Offset:900h + + * (ep_num * 20h) + 14h</i> */ + volatile uint32_t diepdma; + /** Reserved. <i>Offset:900h + (ep_num * 20h) + 18h - 900h + + * (ep_num * 20h) + 1Ch</i>*/ + volatile uint32_t dtxfsts; + /** Reserved. <i>Offset:900h + (ep_num * 20h) + 1Ch - 900h + + * (ep_num * 20h) + 1Ch</i>*/ + uint32_t reserved18; +} dwc_otg_dev_in_ep_regs_t; + +/** + * Device Logical OUT Endpoint-Specific Registers. <i>Offsets: + * B00h-CFCh</i> + * + * There will be one set of endpoint registers per logical endpoint + * implemented. + * + * <i>These registers are visible only in Device mode and must not be + * accessed in Host mode, as the results are unknown.</i> + */ +typedef struct dwc_otg_dev_out_ep_regs +{ + /** Device OUT Endpoint Control Register. <i>Offset:B00h + + * (ep_num * 20h) + 00h</i> */ + volatile uint32_t doepctl; + /** Device OUT Endpoint Frame number Register. <i>Offset: + * B00h + (ep_num * 20h) + 04h</i> */ + volatile uint32_t doepfn; + /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h + + * (ep_num * 20h) + 08h</i> */ + volatile uint32_t doepint; + /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */ + uint32_t reserved0C; + /** Device OUT Endpoint Transfer Size Register. <i>Offset: + * B00h + (ep_num * 20h) + 10h</i> */ + volatile uint32_t doeptsiz; + /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h + * + (ep_num * 20h) + 14h</i> */ + volatile uint32_t doepdma; + /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 18h - B00h + + * (ep_num * 20h) + 1Ch</i> */ + uint32_t unused[2]; +} dwc_otg_dev_out_ep_regs_t; + +/** + * This union represents the bit fields in the Device EP Control + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union depctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** Endpoint Enable */ + unsigned epena : 1; + /** Endpoint Disable */ + unsigned epdis : 1; + /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) + * Writing to this field sets the Endpoint DPID (DPID) + * field in this register to DATA1 Set Odd + * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) + * Writing to this field sets the Even/Odd + * (micro)frame (EO_FrNum) field to odd (micro) frame. + */ + unsigned setd1pid : 1; + /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) + * Writing to this field sets the Endpoint DPID (DPID) + * field in this register to DATA0. Set Even + * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) + * Writing to this field sets the Even/Odd + * (micro)frame (EO_FrNum) field to even (micro) + * frame. + */ + unsigned setd0pid : 1; + /** Set NAK */ + unsigned snak : 1; + /** Clear NAK */ + unsigned cnak : 1; + /** Tx Fifo Number + * IN EPn/IN EP0 + * OUT EPn/OUT EP0 - reserved */ + unsigned txfnum : 4; + /** Stall Handshake */ + unsigned stall : 1; + /** Snoop Mode + * OUT EPn/OUT EP0 + * IN EPn/IN EP0 - reserved */ + unsigned snp : 1; + /** Endpoint Type + * 2'b00: Control + * 2'b01: Isochronous + * 2'b10: Bulk + * 2'b11: Interrupt */ + unsigned eptype : 2; + /** NAK Status */ + unsigned naksts : 1; + /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) + * This field contains the PID of the packet going to + * be received or transmitted on this endpoint. The + * application should program the PID of the first + * packet going to be received or transmitted on this + * endpoint , after the endpoint is + * activated. Application use the SetD1PID and + * SetD0PID fields of this register to program either + * D0 or D1 PID. + * + * The encoding for this field is + * - 0: D0 + * - 1: D1 + */ + unsigned dpid : 1; + /** USB Active Endpoint */ + unsigned usbactep : 1; + /** Next Endpoint + * IN EPn/IN EP0 + * OUT EPn/OUT EP0 - reserved */ + unsigned nextep : 4; + /** Maximum Packet Size + * IN/OUT EPn + * IN/OUT EP0 - 2 bits + * 2'b00: 64 Bytes + * 2'b01: 32 + * 2'b10: 16 + * 2'b11: 8 */ +#define DWC_DEP0CTL_MPS_64 0 +#define DWC_DEP0CTL_MPS_32 1 +#define DWC_DEP0CTL_MPS_16 2 +#define DWC_DEP0CTL_MPS_8 3 + unsigned mps : 11; + } b; +} depctl_data_t; + +/** + * This union represents the bit fields in the Device EP Transfer + * Size Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union deptsiz_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 1; + /** Multi Count - Periodic IN endpoints */ + unsigned mc : 2; + /** Packet Count */ + unsigned pktcnt : 10; + /** Transfer size */ + unsigned xfersize : 19; + } b; +} deptsiz_data_t; + +/** + * This union represents the bit fields in the Device EP 0 Transfer + * Size Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union deptsiz0_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved31 : 1; + /**Setup Packet Count (DOEPTSIZ0 Only) */ + unsigned supcnt : 2; + /** Reserved */ + unsigned reserved28_20 : 9; + /** Packet Count */ + unsigned pktcnt : 1; + /** Reserved */ + unsigned reserved18_7 : 12; + /** Transfer size */ + unsigned xfersize : 7; + } b; +} deptsiz0_data_t; + + +/** Maximum number of Periodic FIFOs */ +#define MAX_PERIO_FIFOS 15 +/** Maximum number of TX FIFOs */ +#define MAX_TX_FIFOS 15 +/** Maximum number of Endpoints/HostChannels */ +#define MAX_EPS_CHANNELS 16 +//#define MAX_EPS_CHANNELS 4 + +/** + * The dwc_otg_dev_if structure contains information needed to manage + * the DWC_otg controller acting in device mode. It represents the + * programming view of the device-specific aspects of the controller. + */ +typedef struct dwc_otg_dev_if { + /** Pointer to device Global registers. + * Device Global Registers starting at offset 800h + */ + dwc_otg_device_global_regs_t *dev_global_regs; +#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 + + /** + * Device Logical IN Endpoint-Specific Registers 900h-AFCh + */ + dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; +#define DWC_DEV_IN_EP_REG_OFFSET 0x900 +#define DWC_EP_REG_OFFSET 0x20 + + /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ + dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; +#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 + + /* Device configuration information*/ + uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ + //uint8_t num_eps; /**< Number of EPs range: 0-16 (includes EP0) */ + //uint8_t num_perio_eps; /**< # of Periodic EP range: 0-15 */ + /*fscz */ + uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ + uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ + + /** Size of periodic FIFOs (Bytes) */ + uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; + + /** Size of Tx FIFOs (Bytes) */ + uint16_t tx_fifo_size[MAX_TX_FIFOS]; + + /** Thresholding enable flags and length varaiables **/ + uint16_t rx_thr_en; + uint16_t iso_tx_thr_en; + uint16_t non_iso_tx_thr_en; + + uint16_t rx_thr_length; + uint16_t tx_thr_length; +} dwc_otg_dev_if_t; + +/** + * This union represents the bit fields in the Power and Clock Gating Control + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union pcgcctl_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + unsigned reserved31_05 : 27; + /** PHY Suspended */ + unsigned physuspended : 1; + /** Reset Power Down Modules */ + unsigned rstpdwnmodule : 1; + /** Power Clamp */ + unsigned pwrclmp : 1; + /** Gate Hclk */ + unsigned gatehclk : 1; + /** Stop Pclk */ + unsigned stoppclk : 1; + } b; +} pcgcctl_data_t; + +///////////////////////////////////////////////// +// Host Mode Register Structures +// +/** + * The Host Global Registers structure defines the size and relative + * field offsets for the Host Mode Global Registers. Host Global + * Registers offsets 400h-7FFh. +*/ +typedef struct dwc_otg_host_global_regs +{ + /** Host Configuration Register. <i>Offset: 400h</i> */ + volatile uint32_t hcfg; + /** Host Frame Interval Register. <i>Offset: 404h</i> */ + volatile uint32_t hfir; + /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */ + volatile uint32_t hfnum; + /** Reserved. <i>Offset: 40Ch</i> */ + uint32_t reserved40C; + /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */ + volatile uint32_t hptxsts; + /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */ + volatile uint32_t haint; + /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */ + volatile uint32_t haintmsk; +} dwc_otg_host_global_regs_t; + +/** + * This union represents the bit fields in the Host Configuration Register. + * Read the register into the <i>d32</i> member then set/clear the bits using + * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register. + */ +typedef union hcfg_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + /** Reserved */ + //unsigned reserved31_03 : 29; + /** FS/LS Only Support */ + unsigned fslssupp : 1; + /** FS/LS Phy Clock Select */ +#define DWC_HCFG_30_60_MHZ 0 +#define DWC_HCFG_48_MHZ 1 +#define DWC_HCFG_6_MHZ 2 + unsigned fslspclksel : 2; + } b; +} hcfg_data_t; + +/** + * This union represents the bit fields in the Host Frame Remaing/Number + * Register. + */ +typedef union hfir_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + unsigned reserved : 16; + unsigned frint : 16; + } b; +} hfir_data_t; + +/** + * This union represents the bit fields in the Host Frame Remaing/Number + * Register. + */ +typedef union hfnum_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + unsigned frrem : 16; +#define DWC_HFNUM_MAX_FRNUM 0x3FFF + unsigned frnum : 16; + } b; +} hfnum_data_t; + +typedef union hptxsts_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + /** Top of the Periodic Transmit Request Queue + * - bit 24 - Terminate (last entry for the selected channel) + * - bits 26:25 - Token Type + * - 2'b00 - Zero length + * - 2'b01 - Ping + * - 2'b10 - Disable + * - bits 30:27 - Channel Number + * - bit 31 - Odd/even microframe + */ + unsigned ptxqtop_odd : 1; + unsigned ptxqtop_chnum : 4; + unsigned ptxqtop_token : 2; + unsigned ptxqtop_terminate : 1; + unsigned ptxqspcavail : 8; + unsigned ptxfspcavail : 16; + } b; +} hptxsts_data_t; + +/** + * This union represents the bit fields in the Host Port Control and Status + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hprt0 register. + */ +typedef union hprt0_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved19_31 : 13; +#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 +#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 +#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 + unsigned prtspd : 2; + unsigned prttstctl : 4; + unsigned prtpwr : 1; + unsigned prtlnsts : 2; + unsigned reserved9 : 1; + unsigned prtrst : 1; + unsigned prtsusp : 1; + unsigned prtres : 1; + unsigned prtovrcurrchng : 1; + unsigned prtovrcurract : 1; + unsigned prtenchng : 1; + unsigned prtena : 1; + unsigned prtconndet : 1; + unsigned prtconnsts : 1; + } b; +} hprt0_data_t; + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union haint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 16; + unsigned ch15 : 1; + unsigned ch14 : 1; + unsigned ch13 : 1; + unsigned ch12 : 1; + unsigned ch11 : 1; + unsigned ch10 : 1; + unsigned ch9 : 1; + unsigned ch8 : 1; + unsigned ch7 : 1; + unsigned ch6 : 1; + unsigned ch5 : 1; + unsigned ch4 : 1; + unsigned ch3 : 1; + unsigned ch2 : 1; + unsigned ch1 : 1; + unsigned ch0 : 1; + } b; + struct { + unsigned reserved : 16; + unsigned chint : 16; + } b2; +} haint_data_t; + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union haintmsk_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + unsigned reserved : 16; + unsigned ch15 : 1; + unsigned ch14 : 1; + unsigned ch13 : 1; + unsigned ch12 : 1; + unsigned ch11 : 1; + unsigned ch10 : 1; + unsigned ch9 : 1; + unsigned ch8 : 1; + unsigned ch7 : 1; + unsigned ch6 : 1; + unsigned ch5 : 1; + unsigned ch4 : 1; + unsigned ch3 : 1; + unsigned ch2 : 1; + unsigned ch1 : 1; + unsigned ch0 : 1; + } b; + struct { + unsigned reserved : 16; + unsigned chint : 16; + } b2; +} haintmsk_data_t; + +/** + * Host Channel Specific Registers. <i>500h-5FCh</i> + */ +typedef struct dwc_otg_hc_regs +{ + /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */ + volatile uint32_t hcchar; + /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */ + volatile uint32_t hcsplt; + /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */ + volatile uint32_t hcint; + /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */ + volatile uint32_t hcintmsk; + /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */ + volatile uint32_t hctsiz; + /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */ + volatile uint32_t hcdma; + /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */ + uint32_t reserved[2]; +} dwc_otg_hc_regs_t; + +/** + * This union represents the bit fields in the Host Channel Characteristics + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hcchar register. + */ +typedef union hcchar_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + /** Channel enable */ + unsigned chen : 1; + /** Channel disable */ + unsigned chdis : 1; + /** + * Frame to transmit periodic transaction. + * 0: even, 1: odd + */ + unsigned oddfrm : 1; + /** Device address */ + unsigned devaddr : 7; + /** Packets per frame for periodic transfers. 0 is reserved. */ + unsigned multicnt : 2; + /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ + unsigned eptype : 2; + /** 0: Full/high speed device, 1: Low speed device */ + unsigned lspddev : 1; + unsigned reserved : 1; + /** 0: OUT, 1: IN */ + unsigned epdir : 1; + /** Endpoint number */ + unsigned epnum : 4; + /** Maximum packet size in bytes */ + unsigned mps : 11; + } b; +} hcchar_data_t; + +typedef union hcsplt_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + /** Split Enble */ + unsigned spltena : 1; + /** Reserved */ + unsigned reserved : 14; + /** Do Complete Split */ + unsigned compsplt : 1; + /** Transaction Position */ +#define DWC_HCSPLIT_XACTPOS_MID 0 +#define DWC_HCSPLIT_XACTPOS_END 1 +#define DWC_HCSPLIT_XACTPOS_BEGIN 2 +#define DWC_HCSPLIT_XACTPOS_ALL 3 + unsigned xactpos : 2; + /** Hub Address */ + unsigned hubaddr : 7; + /** Port Address */ + unsigned prtaddr : 7; + } b; +} hcsplt_data_t; + + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union hcint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** Reserved */ + unsigned reserved : 21; + /** Data Toggle Error */ + unsigned datatglerr : 1; + /** Frame Overrun */ + unsigned frmovrun : 1; + /** Babble Error */ + unsigned bblerr : 1; + /** Transaction Err */ + unsigned xacterr : 1; + /** NYET Response Received */ + unsigned nyet : 1; + /** ACK Response Received */ + unsigned ack : 1; + /** NAK Response Received */ + unsigned nak : 1; + /** STALL Response Received */ + unsigned stall : 1; + /** AHB Error */ + unsigned ahberr : 1; + /** Channel Halted */ + unsigned chhltd : 1; + /** Transfer Complete */ + unsigned xfercomp : 1; + } b; +} hcint_data_t; + +/** + * This union represents the bit fields in the Host Channel Transfer Size + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hcchar register. + */ +typedef union hctsiz_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + /** Do PING protocol when 1 */ + unsigned dopng : 1; + /** + * Packet ID for next data packet + * 0: DATA0 + * 1: DATA2 + * 2: DATA1 + * 3: MDATA (non-Control), SETUP (Control) + */ +#define DWC_HCTSIZ_DATA0 0 +#define DWC_HCTSIZ_DATA1 2 +#define DWC_HCTSIZ_DATA2 1 +#define DWC_HCTSIZ_MDATA 3 +#define DWC_HCTSIZ_SETUP 3 + unsigned pid : 2; + /** Data packets to transfer */ + unsigned pktcnt : 10; + /** Total transfer size in bytes */ + unsigned xfersize : 19; + } b; +} hctsiz_data_t; + +/** + * This union represents the bit fields in the Host Channel Interrupt Mask + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hcintmsk register. + */ +typedef union hcintmsk_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct { + unsigned reserved : 21; + unsigned datatglerr : 1; + unsigned frmovrun : 1; + unsigned bblerr : 1; + unsigned xacterr : 1; + unsigned nyet : 1; + unsigned ack : 1; + unsigned nak : 1; + unsigned stall : 1; + unsigned ahberr : 1; + unsigned chhltd : 1; + unsigned xfercompl : 1; + } b; +} hcintmsk_data_t; + +/** OTG Host Interface Structure. + * + * The OTG Host Interface Structure structure contains information + * needed to manage the DWC_otg controller acting in host mode. It + * represents the programming view of the host-specific aspects of the + * controller. + */ +typedef struct dwc_otg_host_if { + /** Host Global Registers starting at offset 400h.*/ + dwc_otg_host_global_regs_t *host_global_regs; +#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 + + /** Host Port 0 Control and Status Register */ + volatile uint32_t *hprt0; +#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 + + + /** Host Channel Specific Registers at offsets 500h-5FCh. */ + dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; +#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 +#define DWC_OTG_CHAN_REGS_OFFSET 0x20 + + + /* Host configuration information */ + /** Number of Host Channels (range: 1-16) */ + uint8_t num_host_channels; + /** Periodic EPs supported (0: no, 1: yes) */ + uint8_t perio_eps_supported; + /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ + uint16_t perio_tx_fifo_size; + +} dwc_otg_host_if_t; + +#endif diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/Kconfig b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/Kconfig new file mode 100644 index 0000000000..7eb8cebf42 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/Kconfig @@ -0,0 +1,58 @@ + +config USB_HOST_IFX + tristate "Infineon USB Host Controller Driver" + depends on USB + default n + help + Infineon USB Host Controller + +config USB_HOST_IFX_B + bool "USB host mode on core 1 and 2" + depends on USB_HOST_IFX + help + Both cores run as host + +#config USB_HOST_IFX_1 +#config USB_HOST_IFX_2 + +#config IFX_DANUBE +#config IFX_AMAZON_SE +config IFX_AR9 + depends on USB_HOST_IFX + bool "AR9" + +config IFX_VR9 + depends on USB_HOST_IFX + bool "VR9" + +#config USB_HOST_IFX_FORCE_USB11 +# bool "Forced USB1.1" +# depends on USB_HOST_IFX +# default n +# help +# force to be USB 1.1 + +#config USB_HOST_IFX_WITH_HS_ELECT_TST +# bool "With HS_Electrical Test" +# depends on USB_HOST_IFX +# default n +# help +# With USBIF HSET routines + +#config USB_HOST_IFX_WITH_ISO +# bool "With ISO transfer" +# depends on USB_HOST_IFX +# default n +# help +# With USBIF ISO transfer + +config USB_HOST_IFX_UNALIGNED_ADJ + bool "Adjust" + depends on USB_HOST_IFX + help + USB_HOST_IFX_UNALIGNED_ADJ + +#config USB_HOST_IFX_UNALIGNED_CHK +#config USB_HOST_IFX_UNALIGNED_NONE + + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/Makefile b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/Makefile new file mode 100644 index 0000000000..0a2ac99380 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/Makefile @@ -0,0 +1,85 @@ + +# +# Makefile for USB Core files and filesystem +# + ifxusb_host-objs := ifxusb_driver.o + ifxusb_host-objs += ifxusb_ctl.o + ifxusb_host-objs += ifxusb_cif.o + ifxusb_host-objs += ifxusb_cif_h.o + ifxusb_host-objs += ifxhcd.o + ifxusb_host-objs += ifxhcd_es.o + ifxusb_host-objs += ifxhcd_intr.o + ifxusb_host-objs += ifxhcd_queue.o + +ifeq ($(CONFIG_IFX_TWINPASS),y) + EXTRA_CFLAGS += -D__IS_TWINPASS__ +endif +ifeq ($(CONFIG_IFX_DANUBE),y) + EXTRA_CFLAGS += -D__IS_DANUBE__ +endif +ifeq ($(CONFIG_IFX_AMAZON_SE),y) + EXTRA_CFLAGS += -D__IS_AMAZON_SE__ +endif +ifeq ($(CONFIG_IFX_AR9),y) + EXTRA_CFLAGS += -D__IS_AR9__ +endif +ifeq ($(CONFIG_IFX_AMAZON_S),y) + EXTRA_CFLAGS += -D__IS_AR9__ +endif +ifeq ($(CONFIG_IFX_VR9),y) + EXTRA_CFLAGS += -D__IS_VR9__ +endif + +ifeq ($(CONFIG_USB_HOST_IFX),y) + EXTRA_CFLAGS += -Dlinux -D__LINUX__ + EXTRA_CFLAGS += -D__IS_HOST__ + EXTRA_CFLAGS += -D__KERNEL__ +endif + +ifeq ($(CONFIG_USB_HOST_IFX),m) + EXTRA_CFLAGS += -Dlinux -D__LINUX__ + EXTRA_CFLAGS += -D__IS_HOST__ + EXTRA_CFLAGS += -D__KERNEL__ +endif + +ifeq ($(CONFIG_USB_DEBUG),y) + EXTRA_CFLAGS += -D__DEBUG__ + EXTRA_CFLAGS += -D__ENABLE_DUMP__ +endif + +ifeq ($(CONFIG_USB_HOST_IFX_B),y) + EXTRA_CFLAGS += -D__IS_DUAL__ +endif +ifeq ($(CONFIG_USB_HOST_IFX_1),y) + EXTRA_CFLAGS += -D__IS_FIRST__ +endif +ifeq ($(CONFIG_USB_HOST_IFX_2),y) + EXTRA_CFLAGS += -D__IS_SECOND__ +endif + +ifeq ($(CONFIG_USB_HOST_IFX_FORCE_USB11),y) + EXTRA_CFLAGS += -D__FORCE_USB11__ +endif +ifeq ($(CONFIG_USB_HOST_IFX_WITH_HS_ELECT_TST),y) + EXTRA_CFLAGS += -D__WITH_HS_ELECT_TST__ +endif +ifeq ($(CONFIG_USB_HOST_IFX_WITH_ISO),y) + EXTRA_CFLAGS += -D__EN_ISOC__ +endif +ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_ADJ),y) + EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_ADJ__ +endif +ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_CHK),y) + EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_CHK__ +endif + +# EXTRA_CFLAGS += -D__DYN_SOF_INTR__ + EXTRA_CFLAGS += -D__UEIP__ +# EXTRA_CFLAGS += -D__EN_ISOC__ +# EXTRA_CFLAGS += -D__EN_ISOC_SPLIT__ + +## 20110628 AVM/WK New flag for less SOF IRQs + EXTRA_CFLAGS += -D__USE_TIMER_4_SOF__ + +obj-$(CONFIG_USB_HOST_IFX) += ifxusb_host.o + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/TagHistory b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/TagHistory new file mode 100644 index 0000000000..3820d70b7a --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/TagHistory @@ -0,0 +1,171 @@ + + ++----------------------------------------------------------------------+ +| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.18-r240-non_musb_ar9_vr9-SOF_Timer_Fixed +| Erzeugt mit SVN-Tagger Version 3.74. ++----------------------------------------------------------------------+ +FIX - Korrektur bei der SOF-Timer/IRQ Steuerung. (Bug in Tag 5.17) +FIX - Fehlerbehandlung an mehreren Stellen korrigiert bzw. eingebaut. + + + ++----------------------------------------------------------------------+ +| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.17-r237-non_musb_ar9_vr9-2_6_32_41_Kompatibel +| Erzeugt mit SVN-Tagger Version 3.73. ++----------------------------------------------------------------------+ +FIX - Kompatiblität zum Update auf Kernel 2.6.32-41. Weiterhin für 28er geeignet. +ENH - Reduktion der Interrruptlast durch Nutzung eines hrtimers anstatt SOF-IRQ. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.16-r208-non_musb_ar9_vr9-20110421_Zero_Paket_Optimiert +| Erzeugt mit SVN-Tagger Version 3.66. ++----------------------------------------------------------------------+ + +FIX - VR9 / AR9 - Zero Packet. Optimierung korrigiert. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.15-r205-non_musb_ar9_vr9-20110421_Zero_Paket_WA_funktioniert +| Erzeugt mit SVN-Tagger Version 3.66. ++----------------------------------------------------------------------+ + +FIX - VR9 / AR9 - "Zero Packet" funktioniert nun wirklich. Letzter Tag hatte einen Bug. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.14-r202-non_musb_ar9_vr9-20110420_Zero_Paket_WA +| Erzeugt mit SVN-Tagger Version 3.66. ++----------------------------------------------------------------------+ + +FIX - VR9 / AR9 - Zero Packet Workaround: ZLP wird nun geschickt wenn URB_ZERO_PACKET aktiv ist. + Wird von LTE Altair Firmware benoetig. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.13-r199-non_musb_ar9_vr9-20110310_Init_Fix +| Erzeugt mit SVN-Tagger Version 3.64. ++----------------------------------------------------------------------+ + +FIX - VR9 / AR9 - Timing der Initialisierungsphase angepasst zum Kernel 2.6.28 mit UGW-4.3.1. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.12-r184-non_musb_ar9_vr9-20110118_Full_Speed_Fix +| Erzeugt mit SVN-Tagger Version 3.58. ++----------------------------------------------------------------------+ +AR9/VR9 (3370,6840,7320): +Makefile - FIX - (Workaround) Debug Modus hilft gegen Enumerationsfehler bei Full Speed Drucker. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.11-r175-non_musb_ar9_vr9-20101220_VR9_2_Ports_DMA_Fix +| Erzeugt mit SVN-Tagger Version 3.58. ++----------------------------------------------------------------------+ + +FIX - VR9 - Workaround DMA Burst Size. Wenn beiden USB Ports benutzt werden, geht der USB Host nicht mehr. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.10-r169-non_musb_ar9_vr9-Fix_Spontan_Reboot +| Erzeugt mit SVN-Tagger Version 3.58. ++----------------------------------------------------------------------+ + +FIX - Endlosschleife führte zu einem spontanen Reboot. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.9-r166-non_musb_ar9_vr9-20101112_deferred_completion +| Erzeugt mit SVN-Tagger Version 3.58. ++----------------------------------------------------------------------+ + +ENH - Deferred URB Completion Mechanismus eingebaut. Nun ca. 10% schneller bei usb-storage. + +FIX - PING Flow Control gefixt. +FIX - Channel Halt wird nun immer angerufen. (Split Transaction wurde nicht erfolgreich gestoppt). +FIX - Spinlock Benutzung verbessert. Mehr Stabilitaet. + +CHG - Ubersetztungsoption __DEBUG__ ist nun abhaengig von CONFIG_USB_DEBUG + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.8-r149-non_musb_ar9_vr9-20100827_LTE_Interrupt_EP_Fix +| Erzeugt mit SVN-Tagger Version 3.57. ++----------------------------------------------------------------------+ +AR9/VR9 - FIX - Interrupt Packets gingen verloren, wegen falschem Timing beim OddFrame Bit. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.7-r142-non_musb_ar9_vr9-20100728_Unaligned_Buf_Fix +| Erzeugt mit SVN-Tagger Version 3.57. ++----------------------------------------------------------------------+ +FIX - "Unaligned Data" Flag wieder nach Transfer geloescht. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.6-r133-non_musb_ar9_vr9-20100714_Toggle_Datenverlust_Fix +| Erzeugt mit SVN-Tagger Version 3.57. ++----------------------------------------------------------------------+ +TL5508 - Einige UMTS Modems funktionierten nicht korrekt an der 7320 (AR9). +FIX - USB Data Toggle des usbcore benutzen. Datenverlust nach EP-Halt. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.5-r130-non_musb_ar9_vr9-20100712_USB_Ports_abschaltbar +| Erzeugt mit SVN-Tagger Version 3.57. ++----------------------------------------------------------------------+ +Power - Fix - Beide USB Port abschaltbar bei rmmod. +rmmod - FIX - URB_Dequeue funktionierte beim Entladen des Treibers nicht (mehrere Ursachen). + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.4-r126-non_musb_ar9_vr9-20100701_Lost_Interrupt_Workaround +| Erzeugt mit SVN-Tagger Version 3.57. ++----------------------------------------------------------------------+ +FIX - Workaround wegen verpasstem Interrupt, bei Full-Speed Interrupt EP. + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.3-r123-non_musb_ar9_vr9-20100630_UMTS_Fixes +| Erzeugt mit SVN-Tagger Version 3.57. ++----------------------------------------------------------------------+ +FIX - Full-Speed Interrupt Endpoint hinter Hi-Speed Hub funktioniert nun (UMTS Modems) +FIX - usb_hcd_link_urb_from_ep API von USBCore muss benutzt werden. +FIX - Interrupt URBs nicht bei NAK completen. + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.2-r114-non_musb_ar9_vr9-20100520_StickAndSurf_funktioniert +| Erzeugt mit SVN-Tagger Version 3.56. ++----------------------------------------------------------------------+ +- Merge mit neuen LANTIQ Sourcen "3.0alpha B100312" +- Fix - Spin_lock eingebaut, Stick&Surf funktioniert nun + +- DEP - CONFIG_USB_HOST_IFX_WITH_ISO wird nicht unterstuetzt: In der Kernel Config deaktivieren. + + + ++----------------------------------------------------------------------+ +| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.1-r107-non_musb_ar9_vr9-20100505_IFXUSB_Host_mit_Energiemonitor +| Erzeugt mit SVN-Tagger Version 3.56. ++----------------------------------------------------------------------+ +USB Host Treiber für AR9 und VR9 +-------------------------------- +FIX - Toggle Error nach STALL - Einfacher Workaround - Nun werden Massenspeicherpartitionen erkannt! +AVM_POWERMETER - USB Energiemonitor Support. + +Bekanntes Problem: Stick and Surf funktioniert nur sporadisch, weil CONTROL_IRQ manchmal ausbleibt. + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd.c new file mode 100644 index 0000000000..d2ae1250bb --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd.c @@ -0,0 +1,2523 @@ +/***************************************************************************** + ** FILE NAME : ifxhcd.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : This file contains the structures, constants, and interfaces for + ** the Host Contoller Driver (HCD). + ** + ** The Host Controller Driver (HCD) is responsible for translating requests + ** from the USB Driver into the appropriate actions on the IFXUSB controller. + ** It isolates the USBD from the specifics of the controller by providing an + ** API to the USBD. + *****************************************************************************/ + +/*! + \file ifxhcd.c + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the implementation of the HCD. In Linux, + the HCD implements the hc_driver API. +*/ + +#include <linux/version.h> +#include "ifxusb_version.h" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> + +#include <linux/device.h> + +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> + +#include <linux/dma-mapping.h> + + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" +#include "ifxhcd.h" + +#include <asm/irq.h> + +#ifdef CONFIG_AVM_POWERMETER +#include <linux/avm_power.h> +#endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/ + +#ifdef __DEBUG__ + static void dump_urb_info(struct urb *_urb, char* _fn_name); + static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh); +#endif + + +/*! + \brief Sets the final status of an URB and returns it to the device driver. Any + required cleanup of the URB is performed. + */ +void ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status) +{ + struct urb *urb=NULL; + unsigned long flags = 0; + + /*== AVM/BC 20101111 Function called with Lock ==*/ + //SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + + if (!list_empty(&_urbd->urbd_list_entry)) + list_del_init (&_urbd->urbd_list_entry); + + if(!_urbd->urb) + { + IFX_ERROR("%s: invalid urb\n",__func__); + /*== AVM/BC 20101111 Function called with Lock ==*/ + //SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + return; + } + + urb=_urbd->urb; + + #ifdef __DEBUG__ + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) + { + IFX_PRINT("%s: _urbd %p, urb %p, device %d, ep %d %s/%s, status=%d\n", + __func__, _urbd,_urbd->urb, usb_pipedevice(_urbd->urb->pipe), + usb_pipeendpoint(_urbd->urb->pipe), + usb_pipein(_urbd->urb->pipe) ? "IN" : "OUT", + (_urbd->is_in) ? "IN" : "OUT", + _status); + if (_urbd->epqh->ep_type == IFXUSB_EP_TYPE_ISOC) + { + int i; + for (i = 0; i < _urbd->urb->number_of_packets; i++) + IFX_PRINT(" ISO Desc %d status: %d\n", i, _urbd->urb->iso_frame_desc[i].status); + } + } + #endif + + if (!_urbd->epqh) + IFX_ERROR("%s: invalid epqd\n",__func__); + + #if defined(__UNALIGNED_BUFFER_ADJ__) + else if(_urbd->is_active) + { + if( _urbd->epqh->aligned_checked && + _urbd->epqh->using_aligned_buf && + _urbd->xfer_buff && + _urbd->is_in ) + memcpy(_urbd->xfer_buff,_urbd->epqh->aligned_buf,_urbd->xfer_len); + _urbd->epqh->using_aligned_buf=0; + _urbd->epqh->using_aligned_setup=0; + _urbd->epqh->aligned_checked=0; + } + #endif + + urb->status = _status; + urb->hcpriv=NULL; + kfree(_urbd); + + usb_hcd_unlink_urb_from_ep(ifxhcd_to_syshcd(_ifxhcd), urb); + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + +// usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb); + usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb, _status); + + /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/ + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); +} + +/*== AVM/BC 20101111 URB Complete deferred + * Must be called with Spinlock + */ + +/*! + \brief Inserts an urbd structur in the completion list. The urbd will be + later completed by select_eps_sub + */ +void defer_ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status) +{ + + _urbd->status = _status; + + //Unlink Urbd from epqh / Insert it into the complete list + list_move_tail(&_urbd->urbd_list_entry, &_ifxhcd->urbd_complete_list); + +} + +/*! + \brief Processes all the URBs in a single EPQHs. Completes them with + status and frees the URBD. + */ +//static +void kill_all_urbs_in_epqh(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh, int _status) +{ + struct list_head *urbd_item; + ifxhcd_urbd_t *urbd; + + if(!_epqh) + return; + + for (urbd_item = _epqh->urbd_list.next; + urbd_item != &_epqh->urbd_list; + urbd_item = _epqh->urbd_list.next) + { + urbd = list_entry(urbd_item, ifxhcd_urbd_t, urbd_list_entry); + ifxhcd_complete_urb(_ifxhcd, urbd, _status); + } +} + + +/*! + \brief Free all EPS in one Processes all the URBs in a single list of EPQHs. Completes them with + -ETIMEDOUT and frees the URBD. + */ +//static +void epqh_list_free(ifxhcd_hcd_t *_ifxhcd, struct list_head *_epqh_list) +{ + struct list_head *item; + ifxhcd_epqh_t *epqh; + + if (!_epqh_list) + return; + if (_epqh_list->next == NULL) /* The list hasn't been initialized yet. */ + return; + + /* Ensure there are no URBDs or URBs left. */ + for (item = _epqh_list->next; item != _epqh_list; item = _epqh_list->next) + { + epqh = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + kill_all_urbs_in_epqh(_ifxhcd, epqh, -ETIMEDOUT); + ifxhcd_epqh_free(epqh); + } +} + + + +//static +void epqh_list_free_all(ifxhcd_hcd_t *_ifxhcd) +{ + unsigned long flags; + + /*== AVM/BC 20101111 - 2.6.28 Needs Spinlock ==*/ + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_active ); + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_ready ); + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_active ); + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_ready ); + #ifdef __EN_ISOC__ + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_active ); + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_ready ); + #endif + epqh_list_free(_ifxhcd, &_ifxhcd->epqh_stdby ); + + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + +} + + +/*! + \brief This function is called to handle the disconnection of host port. + */ +int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd) +{ + IFX_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _ifxhcd); + + /* Set status flags for the hub driver. */ + _ifxhcd->flags.b.port_connect_status_change = 1; + _ifxhcd->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + { + gint_data_t intr = { .d32 = 0 }; + intr.b.nptxfempty = 1; + intr.b.ptxfempty = 1; + intr.b.hcintr = 1; + ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintmsk, intr.d32, 0); + ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintsts, intr.d32, 0); + } + + /* Respond with an error status to all URBs in the schedule. */ + epqh_list_free_all(_ifxhcd); + + /* Clean up any host channels that were in use. */ + { + int num_channels; + ifxhcd_hc_t *channel; + ifxusb_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + int i; + + num_channels = _ifxhcd->core_if.params.host_channels; + + for (i = 0; i < num_channels; i++) + { + channel = &_ifxhcd->ifxhc[i]; + if (list_empty(&channel->hc_list_entry)) + { + hc_regs = _ifxhcd->core_if.hc_regs[i]; + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + if (hcchar.b.chen) + { + /* Halt the channel. */ + hcchar.b.chdis = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + } + list_add_tail(&channel->hc_list_entry, &_ifxhcd->free_hc_list); + ifxhcd_hc_cleanup(&_ifxhcd->core_if, channel); + } + } + } + return 1; +} + + +/*! + \brief Frees secondary storage associated with the ifxhcd_hcd structure contained + in the struct usb_hcd field. + */ +static void ifxhcd_freeextra(struct usb_hcd *_syshcd) +{ + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd); + + IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD FREE\n"); + + /* Free memory for EPQH/URBD lists */ + epqh_list_free_all(ifxhcd); + + /* Free memory for the host channels. */ + ifxusb_free_buf(ifxhcd->status_buf); + return; +} +#ifdef __USE_TIMER_4_SOF__ +static enum hrtimer_restart ifxhcd_timer_func(struct hrtimer *timer) { + ifxhcd_hcd_t *ifxhcd = container_of(timer, ifxhcd_hcd_t, hr_timer); + + ifxhcd_handle_intr(ifxhcd); + + return HRTIMER_NORESTART; +} +#endif + +/*! + \brief Initializes the HCD. This function allocates memory for and initializes the + static parts of the usb_hcd and ifxhcd_hcd structures. It also registers the + USB bus with the core and calls the hc_driver->start() function. It returns + a negative error on failure. + */ +int ifxhcd_init(ifxhcd_hcd_t *_ifxhcd) +{ + int retval = 0; + struct usb_hcd *syshcd = NULL; + + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD INIT\n"); + + spin_lock_init(&_ifxhcd->lock); +#ifdef __USE_TIMER_4_SOF__ + hrtimer_init(&_ifxhcd->hr_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + _ifxhcd->hr_timer.function = ifxhcd_timer_func; +#endif + _ifxhcd->hc_driver.description = _ifxhcd->core_if.core_name; + _ifxhcd->hc_driver.product_desc = "IFX USB Controller"; + //_ifxhcd->hc_driver.hcd_priv_size = sizeof(ifxhcd_hcd_t); + _ifxhcd->hc_driver.hcd_priv_size = sizeof(unsigned long); + _ifxhcd->hc_driver.irq = ifxhcd_irq; + _ifxhcd->hc_driver.flags = HCD_MEMORY | HCD_USB2; + _ifxhcd->hc_driver.start = ifxhcd_start; + _ifxhcd->hc_driver.stop = ifxhcd_stop; + //_ifxhcd->hc_driver.reset = + //_ifxhcd->hc_driver.suspend = + //_ifxhcd->hc_driver.resume = + _ifxhcd->hc_driver.urb_enqueue = ifxhcd_urb_enqueue; + _ifxhcd->hc_driver.urb_dequeue = ifxhcd_urb_dequeue; + _ifxhcd->hc_driver.endpoint_disable = ifxhcd_endpoint_disable; + _ifxhcd->hc_driver.get_frame_number = ifxhcd_get_frame_number; + _ifxhcd->hc_driver.hub_status_data = ifxhcd_hub_status_data; + _ifxhcd->hc_driver.hub_control = ifxhcd_hub_control; + //_ifxhcd->hc_driver.hub_suspend = + //_ifxhcd->hc_driver.hub_resume = + + /* Allocate memory for and initialize the base HCD and */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) + syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->core_if.core_name); +#else + syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->dev->bus_id); +#endif + + if (syshcd == NULL) + { + retval = -ENOMEM; + goto error1; + } + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) + syshcd->has_tt = 1; +#endif + + syshcd->rsrc_start = (unsigned long)_ifxhcd->core_if.core_global_regs; + syshcd->regs = (void *)_ifxhcd->core_if.core_global_regs; + syshcd->self.otg_port = 0; + + //*((unsigned long *)(&(syshcd->hcd_priv)))=(unsigned long)_ifxhcd; + //*((unsigned long *)(&(syshcd->hcd_priv[0])))=(unsigned long)_ifxhcd; + syshcd->hcd_priv[0]=(unsigned long)_ifxhcd; + _ifxhcd->syshcd=syshcd; + + INIT_LIST_HEAD(&_ifxhcd->epqh_np_active ); + INIT_LIST_HEAD(&_ifxhcd->epqh_np_ready ); + INIT_LIST_HEAD(&_ifxhcd->epqh_intr_active ); + INIT_LIST_HEAD(&_ifxhcd->epqh_intr_ready ); + #ifdef __EN_ISOC__ + INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_active ); + INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_ready ); + #endif + INIT_LIST_HEAD(&_ifxhcd->epqh_stdby ); + INIT_LIST_HEAD(&_ifxhcd->urbd_complete_list); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&_ifxhcd->free_hc_list); + { + int num_channels = _ifxhcd->core_if.params.host_channels; + int i; + for (i = 0; i < num_channels; i++) + { + _ifxhcd->ifxhc[i].hc_num = i; + IFX_DEBUGPL(DBG_HCDV, "HCD Added channel #%d\n", i); + } + } + + /* Set device flags indicating whether the HCD supports DMA. */ + if(_ifxhcd->dev->dma_mask) + *(_ifxhcd->dev->dma_mask) = ~0; + _ifxhcd->dev->coherent_dma_mask = ~0; + + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls ifxusb_hcd_start method. + */ +// retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, SA_INTERRUPT|SA_SHIRQ); + retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, IRQF_DISABLED | IRQF_SHARED ); + if (retval < 0) + goto error2; + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + _ifxhcd->status_buf = ifxusb_alloc_buf(IFXHCD_STATUS_BUF_SIZE, 1); + + if (_ifxhcd->status_buf) + { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->core_if.core_name, syshcd->self.busnum); +#else + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->dev->bus_id, syshcd->self.busnum); +#endif + return 0; + } + IFX_ERROR("%s: status_buf allocation failed\n", __func__); + + /* Error conditions */ + usb_remove_hcd(syshcd); +error2: + ifxhcd_freeextra(syshcd); + usb_put_hcd(syshcd); +error1: + return retval; +} + +/*! + \brief Removes the HCD. + Frees memory and resources associated with the HCD and deregisters the bus. + */ +void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd) +{ + struct usb_hcd *syshcd = ifxhcd_to_syshcd(_ifxhcd); + + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD REMOVE\n"); + +/* == AVM/WK 20100709 - Fix: Order changed, disable IRQs not before remove_hcd == */ + + usb_remove_hcd(syshcd); + + /* Turn off all interrupts */ + ifxusb_wreg (&_ifxhcd->core_if.core_global_regs->gintmsk, 0); + ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gahbcfg, 1, 0); + + ifxhcd_freeextra(syshcd); + + usb_put_hcd(syshcd); + + return; +} + + +/* ========================================================================= + * Linux HC Driver Functions + * ========================================================================= */ + +/*! + \brief Initializes the IFXUSB controller and its root hub and prepares it for host + mode operation. Activates the root port. Returns 0 on success and a negative + error code on failure. + Called by USB stack. + */ +int ifxhcd_start(struct usb_hcd *_syshcd) +{ + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd); + ifxusb_core_if_t *core_if = &ifxhcd->core_if; + struct usb_bus *bus; + + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD START\n"); + + bus = hcd_to_bus(_syshcd); + + /* Initialize the bus state. */ + _syshcd->state = HC_STATE_RUNNING; + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) + { + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Has Root Hub\n"); + /* Inform the HUB driver to resume. */ + usb_hcd_resume_root_hub(_syshcd); + } + + ifxhcd->flags.d32 = 0; + + /* Put all channels in the free channel list and clean up channel states.*/ + { + struct list_head *item; + item = ifxhcd->free_hc_list.next; + while (item != &ifxhcd->free_hc_list) + { + list_del(item); + item = ifxhcd->free_hc_list.next; + } + } + { + int num_channels = ifxhcd->core_if.params.host_channels; + int i; + for (i = 0; i < num_channels; i++) + { + ifxhcd_hc_t *channel; + channel = &ifxhcd->ifxhc[i]; + list_add_tail(&channel->hc_list_entry, &ifxhcd->free_hc_list); + ifxhcd_hc_cleanup(&ifxhcd->core_if, channel); + } + } + /* Initialize the USB core for host mode operation. */ + + ifxusb_host_enable_interrupts(core_if); + ifxusb_enable_global_interrupts(core_if); + ifxusb_phy_power_on (core_if); + + ifxusb_vbus_init(core_if); + + /* Turn on the vbus power. */ + { + hprt0_data_t hprt0; + hprt0.d32 = ifxusb_read_hprt0(core_if); + + IFX_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr); + if (hprt0.b.prtpwr == 0 ) + { + hprt0.b.prtpwr = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + ifxusb_vbus_on(core_if); + } + } + return 0; +} + + +/*! + \brief Halts the IFXUSB host mode operations in a clean manner. USB transfers are + stopped. + */ +void ifxhcd_stop(struct usb_hcd *_syshcd) +{ + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd); + hprt0_data_t hprt0 = { .d32=0 }; + + IFX_DEBUGPL(DBG_HCD, "IFX USB HCD STOP\n"); + + /* Turn off all interrupts. */ + ifxusb_disable_global_interrupts(&ifxhcd->core_if ); + ifxusb_host_disable_interrupts(&ifxhcd->core_if ); +#ifdef __USE_TIMER_4_SOF__ + hrtimer_cancel(&ifxhcd->hr_timer); +#endif + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the URBD lists (via ..._hcd_urb_dequeue) + * and the EPQH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off the vbus power */ + IFX_PRINT("PortPower off\n"); + + ifxusb_vbus_off(&ifxhcd->core_if ); + + ifxusb_vbus_free(&ifxhcd->core_if ); + + hprt0.b.prtpwr = 0; + ifxusb_wreg(ifxhcd->core_if.hprt0, hprt0.d32); + return; +} + +/*! + \brief Returns the current frame number + */ +int ifxhcd_get_frame_number(struct usb_hcd *_syshcd) +{ + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd); + hfnum_data_t hfnum; + + hfnum.d32 = ifxusb_rreg(&ifxhcd->core_if.host_global_regs->hfnum); + + return hfnum.b.frnum; +} + +/*! + \brief Starts processing a USB transfer request specified by a USB Request Block + (URB). mem_flags indicates the type of memory allocation to use while + processing this URB. + */ +int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd, + /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/ + struct urb *_urb, + gfp_t _mem_flags) +{ + int retval = 0; + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd); + struct usb_host_endpoint *_sysep = ifxhcd_urb_to_endpoint(_urb); + ifxhcd_epqh_t *epqh; + + #ifdef __DEBUG__ + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) + dump_urb_info(_urb, "ifxusb_hcd_urb_enqueue"); + #endif //__DEBUG__ + + if (!ifxhcd->flags.b.port_connect_status) /* No longer connected. */ + return -ENODEV; + + #ifndef __EN_ISOC__ + if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) + { + IFX_ERROR("ISOC transfer not supported!!!\n"); + return -ENODEV; + } + #endif + + retval=ifxhcd_urbd_create (ifxhcd,_urb); + + if (retval) + { + IFX_ERROR("IFXUSB HCD URB Enqueue failed creating URBD\n"); + return retval; + } + epqh = (ifxhcd_epqh_t *) _sysep->hcpriv; + ifxhcd_epqh_ready(ifxhcd, epqh); + + select_eps(ifxhcd); + //enable_sof(ifxhcd); + { + gint_data_t gintsts; + gintsts.d32=0; + gintsts.b.sofintr = 1; + ifxusb_mreg(&ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32); + } + + return retval; +} + +/*! + \brief Aborts/cancels a USB transfer request. Always returns 0 to indicate + success. + */ +int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd, + struct urb *_urb, int status /* Parameter neu in 2.6.28 */) +{ + unsigned long flags; + ifxhcd_hcd_t *ifxhcd; + ifxhcd_urbd_t *urbd; + ifxhcd_epqh_t *epqh; + int is_active=0; + int rc; + + struct usb_host_endpoint *_sysep; + + IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD URB Dequeue\n"); + + #ifndef __EN_ISOC__ + if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) + return 0; + #endif + + _sysep = ifxhcd_urb_to_endpoint(_urb); + + ifxhcd = syshcd_to_ifxhcd(_syshcd); + + SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags); + + /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/ + rc = usb_hcd_check_unlink_urb(_syshcd, _urb, status); + if (rc) { + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); + return rc; + } + + urbd = (ifxhcd_urbd_t *) _urb->hcpriv; + + if(_sysep) + epqh = (ifxhcd_epqh_t *) _sysep->hcpriv; + else + epqh = (ifxhcd_epqh_t *) urbd->epqh; + + if(epqh!=urbd->epqh) + IFX_ERROR("%s inconsistant epqh %p %p\n",__func__,epqh,urbd->epqh); + + #ifdef __DEBUG__ + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) + { + dump_urb_info(_urb, "ifxhcd_urb_dequeue"); + if (epqh->is_active) + dump_channel_info(ifxhcd, epqh); + } + #endif //__DEBUG__ + + if(!epqh->hc) + epqh->is_active=0; + else if (!ifxhcd->flags.b.port_connect_status) + epqh->is_active=0; + else if (epqh->is_active && urbd->is_active) + { + /*== AVM/WK 20100709 - halt channel only if really started ==*/ + //if (epqh->hc->xfer_started && !epqh->hc->wait_for_sof) { + /*== AVM/WK 20101112 - halt channel if started ==*/ + if (epqh->hc->xfer_started) { + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + /* == 20110803 AVM/WK FIX propagate status == */ + if (_urb->status == -EINPROGRESS) { + _urb->status = status; + } + ifxhcd_hc_halt(&ifxhcd->core_if, epqh->hc, HC_XFER_URB_DEQUEUE); + epqh->hc = NULL; + is_active=1; + } + } + + if(is_active) + { + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); + } + else + { + list_del_init(&urbd->urbd_list_entry); + kfree (urbd); + + /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/ + usb_hcd_unlink_urb_from_ep(_syshcd, _urb); + + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); + _urb->hcpriv = NULL; +// usb_hcd_giveback_urb(_syshcd, _urb); + usb_hcd_giveback_urb(_syshcd, _urb, status /* neu in 2.6.28 */); + select_eps(ifxhcd); + } + + return 0; +} + + + +/*! + \brief Frees resources in the IFXUSB controller related to a given endpoint. Also + clears state in the HCD related to the endpoint. Any URBs for the endpoint + must already be dequeued. + */ +void ifxhcd_endpoint_disable( struct usb_hcd *_syshcd, + struct usb_host_endpoint *_sysep) +{ + ifxhcd_epqh_t *epqh; + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd); + unsigned long flags; + + int retry = 0; + + IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD EP DISABLE: _bEndpointAddress=0x%02x, " + "endpoint=%d\n", _sysep->desc.bEndpointAddress, + ifxhcd_ep_addr_to_endpoint(_sysep->desc.bEndpointAddress)); + + SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags); + if((uint32_t)_sysep>=0x80000000 && (uint32_t)_sysep->hcpriv>=(uint32_t)0x80000000) + { + epqh = (ifxhcd_epqh_t *)(_sysep->hcpriv); + if (epqh && epqh->sysep==_sysep) + { + +#if 1 /*== AVM/BC 20101111 CHG Option active: Kill URBs when disabling EP ==*/ + while (!list_empty(&epqh->urbd_list)) + { + if (retry++ > 250) + { + IFX_WARN("IFXUSB HCD EP DISABLE:" + " URBD List for this endpoint is not empty\n"); + break; + } + kill_all_urbs_in_epqh(ifxhcd, epqh, -ETIMEDOUT); + } +#else + while (!list_empty(&epqh->urbd_list)) + { + /** Check that the QTD list is really empty */ + if (retry++ > 250) + { + IFX_WARN("IFXUSB HCD EP DISABLE:" + " URBD List for this endpoint is not empty\n"); + break; + } + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); + schedule_timeout_uninterruptible(1); + SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags); + } +#endif + + ifxhcd_epqh_free(epqh); + _sysep->hcpriv = NULL; + } + } + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); +} + + +/*! + \brief Handles host mode interrupts for the IFXUSB controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs + */ +irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd) +{ + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd); + int32_t retval=0; + + //mask_and_ack_ifx_irq (ifxhcd->core_if.irq); + retval = ifxhcd_handle_intr(ifxhcd); + return IRQ_RETVAL(retval); +} + + +/*! + \brief Handles host mode Over Current Interrupt + */ +irqreturn_t ifxhcd_oc_irq(int _irq , void *_dev) +{ + ifxhcd_hcd_t *ifxhcd = _dev; + int32_t retval=1; + + ifxhcd->flags.b.port_over_current_change = 1; + ifxusb_vbus_off(&ifxhcd->core_if); + IFX_DEBUGP("OC INTERRUPT # %d\n",ifxhcd->core_if.core_no); + + //mask_and_ack_ifx_irq (_irq); + return IRQ_RETVAL(retval); +} + +/*! + \brief Creates Status Change bitmap for the root hub and root port. The bitmap is + returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + is the status change indicator for the single root port. Returns 1 if either + change indicator is 1, otherwise returns 0. + */ +int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf) +{ + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd); + + _buf[0] = 0; + _buf[0] |= (ifxhcd->flags.b.port_connect_status_change || + ifxhcd->flags.b.port_reset_change || + ifxhcd->flags.b.port_enable_change || + ifxhcd->flags.b.port_suspend_change || + ifxhcd->flags.b.port_over_current_change) << 1; + + #ifdef __DEBUG__ + if (_buf[0]) + { + IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD HUB STATUS DATA:" + " Root port status changed\n"); + IFX_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", + ifxhcd->flags.b.port_connect_status_change); + IFX_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", + ifxhcd->flags.b.port_reset_change); + IFX_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", + ifxhcd->flags.b.port_enable_change); + IFX_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", + ifxhcd->flags.b.port_suspend_change); + IFX_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", + ifxhcd->flags.b.port_over_current_change); + } + #endif //__DEBUG__ + return (_buf[0] != 0); +} + +#ifdef __WITH_HS_ELECT_TST__ + extern void do_setup(ifxusb_core_if_t *_core_if) ; + extern void do_in_ack(ifxusb_core_if_t *_core_if); +#endif //__WITH_HS_ELECT_TST__ + +/*! + \brief Handles hub class-specific requests. + */ +int ifxhcd_hub_control( struct usb_hcd *_syshcd, + u16 _typeReq, + u16 _wValue, + u16 _wIndex, + char *_buf, + u16 _wLength) +{ + int retval = 0; + + ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd); + ifxusb_core_if_t *core_if = &ifxhcd->core_if; + struct usb_hub_descriptor *desc; + hprt0_data_t hprt0 = {.d32 = 0}; + + uint32_t port_status; + + switch (_typeReq) + { + case ClearHubFeature: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearHubFeature 0x%x\n", _wValue); + switch (_wValue) + { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + default: + retval = -EINVAL; + IFX_ERROR ("IFXUSB HCD - " + "ClearHubFeature request %xh unknown\n", _wValue); + } + break; + case ClearPortFeature: + if (!_wIndex || _wIndex > 1) + goto error; + + switch (_wValue) + { + case USB_PORT_FEAT_ENABLE: + IFX_DEBUGPL (DBG_ANY, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtena = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_SUSPEND: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtres = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + /* Clear Resume bit */ + mdelay (100); + hprt0.b.prtres = 0; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_POWER: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + #ifdef __IS_DUAL__ + ifxusb_vbus_off(core_if); + #else + ifxusb_vbus_off(core_if); + #endif + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtpwr = 0; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_INDICATOR: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port inidicator not supported */ + break; + case USB_PORT_FEAT_C_CONNECTION: + /* Clears drivers internal connect status change + * flag */ + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + ifxhcd->flags.b.port_connect_status_change = 0; + break; + case USB_PORT_FEAT_C_RESET: + /* Clears the driver's internal Port Reset Change + * flag */ + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + ifxhcd->flags.b.port_reset_change = 0; + break; + case USB_PORT_FEAT_C_ENABLE: + /* Clears the driver's internal Port + * Enable/Disable Change flag */ + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + ifxhcd->flags.b.port_enable_change = 0; + break; + case USB_PORT_FEAT_C_SUSPEND: + /* Clears the driver's internal Port Suspend + * Change flag, which is set when resume signaling on + * the host port is complete */ + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + ifxhcd->flags.b.port_suspend_change = 0; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + ifxhcd->flags.b.port_over_current_change = 0; + break; + default: + retval = -EINVAL; + IFX_ERROR ("IFXUSB HCD - " + "ClearPortFeature request %xh " + "unknown or unsupported\n", _wValue); + } + break; + case GetHubDescriptor: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "GetHubDescriptor\n"); + desc = (struct usb_hub_descriptor *)_buf; + desc->bDescLength = 9; + desc->bDescriptorType = 0x29; + desc->bNbrPorts = 1; + desc->wHubCharacteristics = 0x08; + desc->bPwrOn2PwrGood = 1; + desc->bHubContrCurrent = 0; +// desc->bitmap[0] = 0; +// desc->bitmap[1] = 0xff; + break; + case GetHubStatus: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "GetHubStatus\n"); + memset (_buf, 0, 4); + break; + case GetPortStatus: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "GetPortStatus\n"); + if (!_wIndex || _wIndex > 1) + goto error; + +# ifdef CONFIG_AVM_POWERMETER + { + /* first port only, but 2 Hosts */ + static unsigned char ucOldPower1 = 255; + static unsigned char ucOldPower2 = 255; + + unsigned char ucNewPower = 0; + struct usb_device *childdev = _syshcd->self.root_hub->children[0]; + + if (childdev != NULL) { + ucNewPower = (childdev->actconfig != NULL) + ? childdev->actconfig->desc.bMaxPower + : 50;/* default: 50 means 100 mA*/ + } + if (_syshcd->self.busnum == 1) { + if (ucOldPower1 != ucNewPower) { + ucOldPower1 = ucNewPower; + printk (KERN_INFO "IFXHCD#1: AVM Powermeter changed to %u mA\n", ucNewPower*2); + PowerManagmentRessourceInfo(powerdevice_usb_host, ucNewPower*2); + } + } else { + if (ucOldPower2 != ucNewPower) { + ucOldPower2 = ucNewPower; + printk (KERN_INFO "IFXHCD#2: AVM Powermeter changed to %u mA\n", ucNewPower*2); + PowerManagmentRessourceInfo(powerdevice_usb_host2, ucNewPower*2); + } + } + } +# endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/ + + port_status = 0; + if (ifxhcd->flags.b.port_connect_status_change) + port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); + if (ifxhcd->flags.b.port_enable_change) + port_status |= (1 << USB_PORT_FEAT_C_ENABLE); + if (ifxhcd->flags.b.port_suspend_change) + port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + if (ifxhcd->flags.b.port_reset_change) + port_status |= (1 << USB_PORT_FEAT_C_RESET); + if (ifxhcd->flags.b.port_over_current_change) + { + IFX_ERROR("Device Not Supported\n"); + port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); + } + if (!ifxhcd->flags.b.port_connect_status) + { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ + *((u32 *) _buf) = cpu_to_le32(port_status); + break; + } + + hprt0.d32 = ifxusb_rreg(core_if->hprt0); + IFX_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); + if (hprt0.b.prtconnsts) + port_status |= (1 << USB_PORT_FEAT_CONNECTION); + if (hprt0.b.prtena) + port_status |= (1 << USB_PORT_FEAT_ENABLE); + if (hprt0.b.prtsusp) + port_status |= (1 << USB_PORT_FEAT_SUSPEND); + if (hprt0.b.prtovrcurract) + port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); + if (hprt0.b.prtrst) + port_status |= (1 << USB_PORT_FEAT_RESET); + if (hprt0.b.prtpwr) + port_status |= (1 << USB_PORT_FEAT_POWER); +/* if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED) + port_status |= (1 << USB_PORT_FEAT_HIGHSPEED); + else if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_LOW_SPEED) + port_status |= (1 << USB_PORT_FEAT_LOWSPEED);*/ + if (hprt0.b.prttstctl) + port_status |= (1 << USB_PORT_FEAT_TEST); + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ + *((u32 *) _buf) = cpu_to_le32(port_status); + break; + case SetHubFeature: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "SetHubFeature\n"); + /* No HUB features supported */ + break; + case SetPortFeature: + if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1)) + goto error; + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + if (!ifxhcd->flags.b.port_connect_status) + break; + switch (_wValue) + { + case USB_PORT_FEAT_SUSPEND: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtsusp = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + //IFX_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32); + /* Suspend the Phy Clock */ + { + pcgcctl_data_t pcgcctl = {.d32=0}; + pcgcctl.b.stoppclk = 1; + ifxusb_wreg(core_if->pcgcctl, pcgcctl.d32); + } + break; + case USB_PORT_FEAT_POWER: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + ifxusb_vbus_on (core_if); + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtpwr = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_RESET: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtrst = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + MDELAY (60); + hprt0.b.prtrst = 0; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + break; + #ifdef __WITH_HS_ELECT_TST__ + case USB_PORT_FEAT_TEST: + { + uint32_t t; + gint_data_t gintmsk; + t = (_wIndex >> 8); /* MSB wIndex USB */ + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t); + warn("USB_PORT_FEAT_TEST %d\n", t); + if (t < 6) + { + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prttstctl = t; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + } + else if (t == 6) /* HS_HOST_PORT_SUSPEND_RESUME */ + { + /* Save current interrupt mask */ + gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive suspend on the root port */ + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtsusp = 1; + hprt0.b.prtres = 0; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive resume on the root port */ + hprt0.d32 = ifxusb_read_hprt0 (core_if); + hprt0.b.prtsusp = 0; + hprt0.b.prtres = 1; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + mdelay(100); + + /* Clear the resume bit */ + hprt0.b.prtres = 0; + ifxusb_wreg(core_if->hprt0, hprt0.d32); + + /* Restore interrupts */ + ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32); + } + else if (t == 7) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ + { + /* Save current interrupt mask */ + gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Send the Setup packet */ + do_setup(core_if); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32); + } + + else if (t == 8) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ + { + /* Save current interrupt mask */ + gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0); + + /* Send the Setup packet */ + do_setup(core_if); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Send the In and Ack packets */ + do_in_ack(core_if); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32); + } + } + break; + #endif //__WITH_HS_ELECT_TST__ + case USB_PORT_FEAT_INDICATOR: + IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + default: + retval = -EINVAL; + IFX_ERROR ("IFXUSB HCD - " + "SetPortFeature request %xh " + "unknown or unsupported\n", _wValue); + } + break; + default: + error: + retval = -EINVAL; + IFX_WARN ("IFXUSB HCD - " + "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", + _typeReq, _wIndex, _wValue); + } + return retval; +} + + +/*! + \brief Assigns transactions from a URBD to a free host channel and initializes the + host channel to perform the transactions. The host channel is removed from + the free list. + \param _ifxhcd The HCD state structure. + \param _epqh Transactions from the first URBD for this EPQH are selected and assigned to a free host channel. + */ +static int assign_and_init_hc(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh) +{ + ifxhcd_hc_t *ifxhc; + ifxhcd_urbd_t *urbd; + struct urb *urb; + + IFX_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _ifxhcd, _epqh); + + if(list_empty(&_epqh->urbd_list)) + return 0; + + ifxhc = list_entry(_ifxhcd->free_hc_list.next, ifxhcd_hc_t, hc_list_entry); + /* Remove the host channel from the free list. */ + list_del_init(&ifxhc->hc_list_entry); + + urbd = list_entry(_epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry); + urb = urbd->urb; + + _epqh->hc = ifxhc; + _epqh->urbd = urbd; + ifxhc->epqh = _epqh; + + urbd->is_active=1; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + ifxhc->dev_addr = usb_pipedevice(urb->pipe); + ifxhc->ep_num = usb_pipeendpoint(urb->pipe); + + ifxhc->xfer_started = 0; + + if (urb->dev->speed == USB_SPEED_LOW) ifxhc->speed = IFXUSB_EP_SPEED_LOW; + else if (urb->dev->speed == USB_SPEED_FULL) ifxhc->speed = IFXUSB_EP_SPEED_FULL; + else ifxhc->speed = IFXUSB_EP_SPEED_HIGH; + + ifxhc->mps = _epqh->mps; + ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + + ifxhc->ep_type = _epqh->ep_type; + + if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL) + { + ifxhc->control_phase=IFXHCD_CONTROL_SETUP; + ifxhc->is_in = 0; + ifxhc->data_pid_start = IFXUSB_HC_PID_SETUP; + ifxhc->xfer_buff = urbd->setup_buff; + ifxhc->xfer_len = 8; + ifxhc->xfer_count = 0; + ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0; + } + else + { + ifxhc->is_in = urbd->is_in; + ifxhc->xfer_buff = urbd->xfer_buff; + ifxhc->xfer_len = urbd->xfer_len; + ifxhc->xfer_count = 0; + /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/ + //ifxhc->data_pid_start = _epqh->data_toggle; + ifxhc->data_pid_start = usb_gettoggle (urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout (urb->pipe)) + ? IFXUSB_HC_PID_DATA1 + : IFXUSB_HC_PID_DATA0; + if(ifxhc->is_in) + ifxhc->short_rw =0; + else + ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0; + + #ifdef __EN_ISOC__ + if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC) + { + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[urbd->isoc_frame_index]; + ifxhc->xfer_buff += frame_desc->offset + urbd->isoc_split_offset; + ifxhc->xfer_len = frame_desc->length - urbd->isoc_split_offset; + if (ifxhc->isoc_xact_pos == IFXUSB_HCSPLIT_XACTPOS_ALL) + { + if (ifxhc->xfer_len <= 188) + ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_ALL; + else + ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_BEGIN; + } + } + #endif + } + + ifxhc->do_ping=0; + if (_ifxhcd->core_if.snpsid < 0x4f54271a && ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + ifxhc->do_ping=1; + + + /* Set the split attributes */ + ifxhc->split = 0; + if (_epqh->need_split) { + ifxhc->split = 1; + ifxhc->hub_addr = urb->dev->tt->hub->devnum; + ifxhc->port_addr = urb->dev->ttport; + } + + //ifxhc->uint16_t pkt_count_limit + + { + hcint_data_t hc_intr_mask; + uint8_t hc_num = ifxhc->hc_num; + ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[hc_num]; + + /* Clear old interrupt conditions for this host channel. */ + hc_intr_mask.d32 = 0xFFFFFFFF; + hc_intr_mask.b.reserved = 0; + ifxusb_wreg(&hc_regs->hcint, hc_intr_mask.d32); + + /* Enable channel interrupts required for this transfer. */ + hc_intr_mask.d32 = 0; + hc_intr_mask.b.chhltd = 1; + hc_intr_mask.b.ahberr = 1; + + ifxusb_wreg(&hc_regs->hcintmsk, hc_intr_mask.d32); + + /* Enable the top level host channel interrupt. */ + { + uint32_t intr_enable; + intr_enable = (1 << hc_num); + ifxusb_mreg(&_ifxhcd->core_if.host_global_regs->haintmsk, 0, intr_enable); + } + + /* Make sure host channel interrupts are enabled. */ + { + gint_data_t gintmsk ={.d32 = 0}; + gintmsk.b.hcintr = 1; + ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0, gintmsk.d32); + } + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer. + */ + { + hcchar_data_t hcchar; + + hcchar.d32 = 0; + hcchar.b.devaddr = ifxhc->dev_addr; + hcchar.b.epnum = ifxhc->ep_num; + hcchar.b.lspddev = (ifxhc->speed == IFXUSB_EP_SPEED_LOW); + hcchar.b.eptype = ifxhc->ep_type; + hcchar.b.mps = ifxhc->mps; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + + IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, ifxhc->hc_num); + IFX_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n" , hcchar.b.devaddr); + IFX_DEBUGPL(DBG_HCDV, " Ep Num: %d\n" , hcchar.b.epnum); + IFX_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); + IFX_DEBUGPL(DBG_HCDV, " Ep Type: %d\n" , hcchar.b.eptype); + IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , hcchar.b.mps); + IFX_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n" , hcchar.b.multicnt); + } + /* Program the HCSPLIT register for SPLITs */ + { + hcsplt_data_t hcsplt; + + hcsplt.d32 = 0; + if (ifxhc->split) + { + IFX_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ifxhc->hc_num, + (ifxhc->split==2) ? "CSPLIT" : "SSPLIT"); + hcsplt.b.spltena = 1; + hcsplt.b.compsplt = (ifxhc->split==2); + #ifdef __EN_ISOC__ + if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC) + hcsplt.b.xactpos = ifxhc->isoc_xact_pos; + else + #endif + hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL; + hcsplt.b.hubaddr = ifxhc->hub_addr; + hcsplt.b.prtaddr = ifxhc->port_addr; + IFX_DEBUGPL(DBG_HCDV, " comp split %d\n" , hcsplt.b.compsplt); + IFX_DEBUGPL(DBG_HCDV, " xact pos %d\n" , hcsplt.b.xactpos); + IFX_DEBUGPL(DBG_HCDV, " hub addr %d\n" , hcsplt.b.hubaddr); + IFX_DEBUGPL(DBG_HCDV, " port addr %d\n" , hcsplt.b.prtaddr); + IFX_DEBUGPL(DBG_HCDV, " is_in %d\n" , ifxhc->is_in); + IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , ifxhc->mps); + IFX_DEBUGPL(DBG_HCDV, " xferlen: %d\n" , ifxhc->xfer_len); + } + ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32); + } + } + + ifxhc->nak_retry_r=ifxhc->nak_retry=0; + ifxhc->nak_countdown_r=ifxhc->nak_countdown=0; + + if (ifxhc->split) + { + if(ifxhc->is_in) + { + } + else + { + } + } + else if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL) + { + if(ifxhc->is_in) + { + } + else + { + } + } + else if(_epqh->ep_type==IFXUSB_EP_TYPE_BULK) + { + if(ifxhc->is_in) + { +// ifxhc->nak_retry_r=ifxhc->nak_retry=nak_retry_max; +// ifxhc->nak_countdown_r=ifxhc->nak_countdown=nak_countdown_max; + } + else + { + } + } + else if(_epqh->ep_type==IFXUSB_EP_TYPE_INTR) + { + if(ifxhc->is_in) + { + } + else + { + } + } + else if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC) + { + if(ifxhc->is_in) + { + } + else + { + } + } + + return 1; +} + +/*! + \brief This function selects transactions from the HCD transfer schedule and + assigns them to available host channels. It is called from HCD interrupt + handler functions. + */ +static void select_eps_sub(ifxhcd_hcd_t *_ifxhcd) +{ + struct list_head *epqh_ptr; + struct list_head *urbd_ptr; + ifxhcd_epqh_t *epqh; + ifxhcd_urbd_t *urbd; + int ret_val=0; + + /*== AVM/BC 20101111 Function called with Lock ==*/ + +// #ifdef __DEBUG__ +// IFX_DEBUGPL(DBG_HCD, " ifxhcd_select_ep\n"); +// #endif + + /* Process entries in the periodic ready list. */ + #ifdef __EN_ISOC__ + epqh_ptr = _ifxhcd->epqh_isoc_ready.next; + while (epqh_ptr != &_ifxhcd->epqh_isoc_ready && !list_empty(&_ifxhcd->free_hc_list)) + { + epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry); + epqh_ptr = epqh_ptr->next; + if(epqh->period_do) + { + if(assign_and_init_hc(_ifxhcd, epqh)) + { + IFX_DEBUGPL(DBG_HCD, " select_eps ISOC\n"); + list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active); + epqh->is_active=1; + ret_val=1; + epqh->period_do=0; + } + } + } + #endif + + epqh_ptr = _ifxhcd->epqh_intr_ready.next; + while (epqh_ptr != &_ifxhcd->epqh_intr_ready && !list_empty(&_ifxhcd->free_hc_list)) + { + epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry); + epqh_ptr = epqh_ptr->next; + if(epqh->period_do) + { + if(assign_and_init_hc(_ifxhcd, epqh)) + { + IFX_DEBUGPL(DBG_HCD, " select_eps INTR\n"); + list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active); + epqh->is_active=1; + ret_val=1; + epqh->period_do=0; + } + } + } + + epqh_ptr = _ifxhcd->epqh_np_ready.next; + while (epqh_ptr != &_ifxhcd->epqh_np_ready && !list_empty(&_ifxhcd->free_hc_list)) // may need to preserve at lease one for period + { + epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry); + epqh_ptr = epqh_ptr->next; + if(assign_and_init_hc(_ifxhcd, epqh)) + { + IFX_DEBUGPL(DBG_HCD, " select_eps CTRL/BULK\n"); + list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_np_active); + epqh->is_active=1; + ret_val=1; + } + } + if(ret_val) + /*== AVM/BC 20101111 Function called with Lock ==*/ + process_channels_sub(_ifxhcd); + + /* AVM/BC 20101111 Urbds completion loop */ + while (!list_empty(&_ifxhcd->urbd_complete_list)) + { + urbd_ptr = _ifxhcd->urbd_complete_list.next; + list_del_init(urbd_ptr); + + urbd = list_entry(urbd_ptr, ifxhcd_urbd_t, urbd_list_entry); + + ifxhcd_complete_urb(_ifxhcd, urbd, urbd->status); + + } + +} + +static void select_eps_func(unsigned long data) +{ + unsigned long flags; + + ifxhcd_hcd_t *ifxhcd; + ifxhcd=((ifxhcd_hcd_t *)data); + + /* AVM/BC 20101111 select_eps_in_use flag removed */ + + SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags); + + /*if(ifxhcd->select_eps_in_use){ + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); + return; + } + ifxhcd->select_eps_in_use=1; + */ + + select_eps_sub(ifxhcd); + + //ifxhcd->select_eps_in_use=0; + + SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags); +} + +void select_eps(ifxhcd_hcd_t *_ifxhcd) +{ + if(in_irq()) + { + if(!_ifxhcd->select_eps.func) + { + _ifxhcd->select_eps.next = NULL; + _ifxhcd->select_eps.state = 0; + atomic_set( &_ifxhcd->select_eps.count, 0); + _ifxhcd->select_eps.func = select_eps_func; + _ifxhcd->select_eps.data = (unsigned long)_ifxhcd; + } + tasklet_schedule(&_ifxhcd->select_eps); + } + else + { + unsigned long flags; + + /* AVM/BC 20101111 select_eps_in_use flag removed */ + + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + + /*if(_ifxhcd->select_eps_in_use){ + printk ("select_eps non_irq: busy\n"); + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + return; + } + _ifxhcd->select_eps_in_use=1; + */ + + select_eps_sub(_ifxhcd); + + //_ifxhcd->select_eps_in_use=0; + + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + } +} + +/*! + \brief + */ +static void process_unaligned( ifxhcd_epqh_t *_epqh) +{ + #if defined(__UNALIGNED_BUFFER_ADJ__) + if(!_epqh->aligned_checked) + { + uint32_t xfer_len; + xfer_len=_epqh->urbd->xfer_len; + if(_epqh->urbd->is_in && xfer_len<_epqh->mps) + xfer_len = _epqh->mps; + _epqh->using_aligned_buf=0; + + if(xfer_len > 0 && ((unsigned long)_epqh->urbd->xfer_buff) & 3) + { + if( _epqh->aligned_buf + && _epqh->aligned_buf_len > 0 + && _epqh->aligned_buf_len < xfer_len + ) + { + ifxusb_free_buf(_epqh->aligned_buf); + _epqh->aligned_buf=NULL; + _epqh->aligned_buf_len=0; + } + if(! _epqh->aligned_buf || ! _epqh->aligned_buf_len) + { + _epqh->aligned_buf = ifxusb_alloc_buf(xfer_len, _epqh->urbd->is_in); + if(_epqh->aligned_buf) + _epqh->aligned_buf_len = xfer_len; + } + if(_epqh->aligned_buf) + { + if(!_epqh->urbd->is_in) + memcpy(_epqh->aligned_buf, _epqh->urbd->xfer_buff, xfer_len); + _epqh->using_aligned_buf=1; + _epqh->hc->xfer_buff = _epqh->aligned_buf; + } + else + IFX_WARN("%s():%d\n",__func__,__LINE__); + } + if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL) + { + _epqh->using_aligned_setup=0; + if(((unsigned long)_epqh->urbd->setup_buff) & 3) + { + if(! _epqh->aligned_setup) + _epqh->aligned_setup = ifxusb_alloc_buf(8,0); + if(_epqh->aligned_setup) + { + memcpy(_epqh->aligned_setup, _epqh->urbd->setup_buff, 8); + _epqh->using_aligned_setup=1; + } + else + IFX_WARN("%s():%d\n",__func__,__LINE__); + _epqh->hc->xfer_buff = _epqh->aligned_setup; + } + } + } + #elif defined(__UNALIGNED_BUFFER_CHK__) + if(!_epqh->aligned_checked) + { + if(_epqh->urbd->is_in) + { + if(_epqh->urbd->xfer_len==0) + IFX_WARN("%s():%d IN xfer while length is zero \n",__func__,__LINE__); + else{ + if(_epqh->urbd->xfer_len < _epqh->mps) + IFX_WARN("%s():%d IN xfer while length < mps \n",__func__,__LINE__); + + if(((unsigned long)_epqh->urbd->xfer_buff) & 3) + IFX_WARN("%s():%d IN xfer Buffer UNALIGNED\n",__func__,__LINE__); + } + } + else + { + if(_epqh->urbd->xfer_len > 0 && (((unsigned long)_epqh->urbd->xfer_buff) & 3) ) + IFX_WARN("%s():%d OUT xfer Buffer UNALIGNED\n",__func__,__LINE__); + } + + if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL) + { + if(((unsigned long)_epqh->urbd->setup_buff) & 3) + IFX_WARN("%s():%d SETUP xfer Buffer UNALIGNED\n",__func__,__LINE__); + } + } + #endif + _epqh->aligned_checked=1; +} + + +/*! + \brief + */ +void process_channels_sub(ifxhcd_hcd_t *_ifxhcd) +{ + ifxhcd_epqh_t *epqh; + struct list_head *epqh_item; + struct ifxhcd_hc *hc; + + #ifdef __EN_ISOC__ + if (!list_empty(&_ifxhcd->epqh_isoc_active)) + { + for (epqh_item = _ifxhcd->epqh_isoc_active.next; + epqh_item != &_ifxhcd->epqh_isoc_active; + ) + { + epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry); + epqh_item = epqh_item->next; + hc=epqh->hc; + if(hc && !hc->xfer_started && epqh->period_do) + { + if(hc->split==0 + || hc->split==1 + ) + { + //epqh->ping_state = 0; + process_unaligned(epqh); + hc->wait_for_sof=epqh->wait_for_sof; + epqh->wait_for_sof=0; + ifxhcd_hc_start(&_ifxhcd->core_if, hc); + epqh->period_do=0; + { + gint_data_t gintsts = {.d32 = 0}; + gintsts.b.sofintr = 1; + ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32); + } + } + } + } + } + #endif + + if (!list_empty(&_ifxhcd->epqh_intr_active)) + { + for (epqh_item = _ifxhcd->epqh_intr_active.next; + epqh_item != &_ifxhcd->epqh_intr_active; + ) + { + epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry); + epqh_item = epqh_item->next; + hc=epqh->hc; + if(hc && !hc->xfer_started && epqh->period_do) + { + if(hc->split==0 + || hc->split==1 + ) + { + //epqh->ping_state = 0; + process_unaligned(epqh); + hc->wait_for_sof=epqh->wait_for_sof; + epqh->wait_for_sof=0; + ifxhcd_hc_start(&_ifxhcd->core_if, hc); + epqh->period_do=0; +#ifdef __USE_TIMER_4_SOF__ + /* AVM/WK change: let hc_start decide, if irq is needed */ +#else + { + gint_data_t gintsts = {.d32 = 0}; + gintsts.b.sofintr = 1; + ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32); + } +#endif + } + } + + } + } + + if (!list_empty(&_ifxhcd->epqh_np_active)) + { + for (epqh_item = _ifxhcd->epqh_np_active.next; + epqh_item != &_ifxhcd->epqh_np_active; + ) + { + epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry); + epqh_item = epqh_item->next; + hc=epqh->hc; + if(hc) + { + if(!hc->xfer_started) + { + if(hc->split==0 + || hc->split==1 + //|| hc->split_counter == 0 + ) + { + //epqh->ping_state = 0; + process_unaligned(epqh); + hc->wait_for_sof=epqh->wait_for_sof; + epqh->wait_for_sof=0; + ifxhcd_hc_start(&_ifxhcd->core_if, hc); + } + } + } + } + } +} + +void process_channels(ifxhcd_hcd_t *_ifxhcd) +{ + unsigned long flags; + + /* AVM/WK Fix: use spin_lock instead busy flag + **/ + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + + //if(_ifxhcd->process_channels_in_use) + // return; + //_ifxhcd->process_channels_in_use=1; + + process_channels_sub(_ifxhcd); + //_ifxhcd->process_channels_in_use=0; + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); +} + + +#ifdef __HC_XFER_TIMEOUT__ + static void hc_xfer_timeout(unsigned long _ptr) + { + hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr; + int hc_num = xfer_info->hc->hc_num; + IFX_WARN("%s: timeout on channel %d\n", __func__, hc_num); + IFX_WARN(" start_hcchar_val 0x%08x\n", xfer_info->hc->start_hcchar_val); + } +#endif + +void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf) +{ + ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num]; + hctsiz_data_t hctsiz= { .d32=0 }; + hcchar_data_t hcchar; + + + _ifxhc->xfer_len = _ifxhc->mps; + hctsiz.b.xfersize = _ifxhc->mps; + hctsiz.b.pktcnt = 0; + hctsiz.b.pid = _ifxhc->data_pid_start; + ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32); + + ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(dump_buf))))); + + { + hcint_data_t hcint= { .d32=0 }; +// hcint.b.nak =1; +// hcint.b.nyet=1; +// hcint.b.ack =1; + hcint.d32 =0xFFFFFFFF; + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + } + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + hcchar.b.epdir = 1; + IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", hcchar.d32); + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); +} + +/*! + \brief This function trigger a data transfer for a host channel and + starts the transfer. + + For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + register along with a packet count of 1 and the channel is enabled. This + causes a single PING transaction to occur. Other fields in HCTSIZ are + simply set to 0 since no data transfer occurs in this case. + + For a PING transfer in DMA mode, the HCTSIZ register is initialized with + all the information required to perform the subsequent data transfer. In + addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + controller performs the entire PING protocol, then starts the data + transfer. + \param _core_if Pointer of core_if structure + \param _ifxhc Information needed to initialize the host channel. The xfer_len + value may be reduced to accommodate the max widths of the XferSize and + PktCnt fields in the HCTSIZn register. The multi_count value may be changed + to reflect the final xfer_len value. + */ +void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc) +{ + hctsiz_data_t hctsiz= { .d32=0 }; + hcchar_data_t hcchar; + uint32_t max_hc_xfer_size = _core_if->params.max_transfer_size; + uint16_t max_hc_pkt_count = _core_if->params.max_packet_count; + ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num]; + hfnum_data_t hfnum; + + hctsiz.b.dopng = 0; +// if(_ifxhc->do_ping && !_ifxhc->is_in) hctsiz.b.dopng = 1; + + _ifxhc->nak_countdown=_ifxhc->nak_countdown_r; + + /* AVM/BC 20101111 Workaround: Always PING if HI-Speed Out and xfer_len > 0 */ + if(/*_ifxhc->do_ping &&*/ + (!_ifxhc->is_in) && + (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH) && + ((_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK) || ((_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL) && (_ifxhc->control_phase != IFXHCD_CONTROL_SETUP))) && + _ifxhc->xfer_len + ) + hctsiz.b.dopng = 1; + + _ifxhc->xfer_started = 1; + + if(_ifxhc->epqh->pkt_count_limit > 0 && _ifxhc->epqh->pkt_count_limit < max_hc_pkt_count ) + { + max_hc_pkt_count=_ifxhc->epqh->pkt_count_limit; + if(max_hc_pkt_count * _ifxhc->mps < max_hc_xfer_size) + max_hc_xfer_size = max_hc_pkt_count * _ifxhc->mps; + } + if (_ifxhc->split > 0) + { + { + gint_data_t gintsts = {.d32 = 0}; + gintsts.b.sofintr = 1; + ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32); + } + + _ifxhc->start_pkt_count = 1; + if(!_ifxhc->is_in && _ifxhc->split>1) // OUT CSPLIT + _ifxhc->xfer_len = 0; + if (_ifxhc->xfer_len > _ifxhc->mps) + _ifxhc->xfer_len = _ifxhc->mps; + if (_ifxhc->xfer_len > 188) + _ifxhc->xfer_len = 188; + } + else if(_ifxhc->is_in) + { + _ifxhc->short_rw = 0; + if (_ifxhc->xfer_len > 0) + { + if (_ifxhc->xfer_len > max_hc_xfer_size) + _ifxhc->xfer_len = max_hc_xfer_size - _ifxhc->mps + 1; + _ifxhc->start_pkt_count = (_ifxhc->xfer_len + _ifxhc->mps - 1) / _ifxhc->mps; + if (_ifxhc->start_pkt_count > max_hc_pkt_count) + _ifxhc->start_pkt_count = max_hc_pkt_count; + } + else /* Need 1 packet for transfer length of 0. */ + _ifxhc->start_pkt_count = 1; + _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps; + } + else //non-split out + { + if (_ifxhc->xfer_len == 0) + { + /*== AVM/BC WK 20110421 ZERO PACKET Workaround: Is not an error ==*/ + //if(_ifxhc->short_rw==0) + // printk(KERN_INFO "%s() line %d: ZLP write without short_rw set!\n",__func__,__LINE__); + _ifxhc->start_pkt_count = 1; + } + else + { + if (_ifxhc->xfer_len > max_hc_xfer_size) + { + _ifxhc->start_pkt_count = (max_hc_xfer_size / _ifxhc->mps); + _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps; + } + else + { + _ifxhc->start_pkt_count = (_ifxhc->xfer_len+_ifxhc->mps-1) / _ifxhc->mps; +// if(_ifxhc->start_pkt_count * _ifxhc->mps == _ifxhc->xfer_len ) +// _ifxhc->start_pkt_count += _ifxhc->short_rw; + /*== AVM/BC WK 20110421 ZERO PACKET Workaround / check if short_rw is needed ==*/ + if(_ifxhc->start_pkt_count * _ifxhc->mps != _ifxhc->xfer_len ) + _ifxhc->short_rw = 0; + } + } + } + + #ifdef __EN_ISOC__ + if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC) + { + /* Set up the initial PID for the transfer. */ + #if 1 + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + #else + if (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + { + if (_ifxhc->is_in) + { + if (_ifxhc->multi_count == 1) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + else if (_ifxhc->multi_count == 2) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA2; + } + else + { + if (_ifxhc->multi_count == 1) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_MDATA; + } + } + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + #endif + } + #endif + + hctsiz.b.xfersize = _ifxhc->xfer_len; + hctsiz.b.pktcnt = _ifxhc->start_pkt_count; + hctsiz.b.pid = _ifxhc->data_pid_start; + + ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32); + + + IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _ifxhc->hc_num); + IFX_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); + IFX_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n" , hctsiz.b.pktcnt); + IFX_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); + IFX_DEBUGPL(DBG_HCDV, " DMA: 0x%08x\n", (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count ))); + ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count ))); + + /* Start the split */ + if (_ifxhc->split>0) + { + hcsplt_data_t hcsplt; + hcsplt.d32 = ifxusb_rreg (&hc_regs->hcsplt); + hcsplt.b.spltena = 1; + if (_ifxhc->split>1) + hcsplt.b.compsplt = 1; + else + hcsplt.b.compsplt = 0; + + #ifdef __EN_ISOC__ + if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC) + hcsplt.b.xactpos = _ifxhc->isoc_xact_pos; + else + #endif + hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;// if not ISO + ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32); + IFX_DEBUGPL(DBG_HCDV, " SPLIT: XACT_POS:0x%08x\n", hcsplt.d32); + } + + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); +// hcchar.b.multicnt = _ifxhc->multi_count; + hcchar.b.multicnt = 1; + + #ifdef __DEBUG__ + _ifxhc->start_hcchar_val = hcchar.d32; + if (hcchar.b.chdis) + IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, _ifxhc->hc_num, hcchar.d32); + #endif + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + hcchar.b.epdir = _ifxhc->is_in; + _ifxhc->hcchar=hcchar.d32; + + IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", _ifxhc->hcchar); + + /* == 20110901 AVM/WK Fix: Clear IRQ flags in any case ==*/ + { + hcint_data_t hcint= { .d32=0 }; + hcint.d32 =0xFFFFFFFF; + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + } + + if(_ifxhc->wait_for_sof==0) + { + hcint_data_t hcint; + + hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk); + + hcint.b.nak =0; + hcint.b.ack =0; + /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/ + hcint.b.nyet=0; + if(_ifxhc->nak_countdown_r) + hcint.b.nak =1; + ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32); + + /* AVM WK / BC 20100827 + * MOVED. Oddframe updated inmediatly before write HCChar Register. + */ + if (_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR || _ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC) + { + hfnum.d32 = ifxusb_rreg(&_core_if->host_global_regs->hfnum); + /* 1 if _next_ frame is odd, 0 if it's even */ + hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; + _ifxhc->hcchar=hcchar.d32; + } + + ifxusb_wreg(&hc_regs->hcchar, _ifxhc->hcchar); +#ifdef __USE_TIMER_4_SOF__ + } else { + //activate SOF IRQ + gint_data_t gintsts = {.d32 = 0}; + gintsts.b.sofintr = 1; + ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32); +#endif + } + + #ifdef __HC_XFER_TIMEOUT__ + /* Start a timer for this transfer. */ + init_timer(&_ifxhc->hc_xfer_timer); + _ifxhc->hc_xfer_timer.function = hc_xfer_timeout; + _ifxhc->hc_xfer_timer.core_if = _core_if; + _ifxhc->hc_xfer_timer.hc = _ifxhc; + _ifxhc->hc_xfer_timer.data = (unsigned long)(&_ifxhc->hc_xfer_info); + _ifxhc->hc_xfer_timer.expires = jiffies + (HZ*10); + add_timer(&_ifxhc->hc_xfer_timer); + #endif +} + +/*! + \brief Attempts to halt a host channel. This function should only be called + to abort a transfer in DMA mode. Under normal circumstances in DMA mode, the + controller halts the channel when the transfer is complete or a condition + occurs that requires application intervention. + + In DMA mode, always sets the Channel Enable and Channel Disable bits of the + HCCHARn register. The controller ensures there is space in the request + queue before submitting the halt request. + + Some time may elapse before the core flushes any posted requests for this + host channel and halts. The Channel Halted interrupt handler completes the + deactivation of the host channel. + */ +void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if, + ifxhcd_hc_t *_ifxhc, + ifxhcd_halt_status_e _halt_status) +{ + hcchar_data_t hcchar; + ifxusb_hc_regs_t *hc_regs; + + hc_regs = _core_if->hc_regs[_ifxhc->hc_num]; + + WARN_ON(_halt_status == HC_XFER_NO_HALT_STATUS); + + if (_halt_status == HC_XFER_URB_DEQUEUE || + _halt_status == HC_XFER_AHB_ERR) + { + /* + * Disable all channel interrupts except Ch Halted. The URBD + * and EPQH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + hcint_data_t hcintmsk; + hcintmsk.d32 = 0; + hcintmsk.b.chhltd = 1; + ifxusb_wreg(&hc_regs->hcintmsk, hcintmsk.d32); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the URBD and EPQH state. + */ + ifxusb_wreg(&hc_regs->hcint, ~hcintmsk.d32); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason. + */ + _ifxhc->halt_status = _halt_status; + + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + if (hcchar.b.chen == 0) + { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + + if (_ifxhc->halting) + { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ + #ifdef __DEBUG__ + IFX_PRINT("*** %s: Channel %d, _hc->halting already set ***\n", + __func__, _ifxhc->hc_num); + #endif + //ifxusb_dump_global_registers(_core_if); */ + //ifxusb_dump_host_registers(_core_if); */ + return; + } + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + /* == AVM/WK 20100709 halt channel only if enabled ==*/ + if (hcchar.b.chen) { + _ifxhc->halting = 1; + hcchar.b.chdis = 1; + + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + _ifxhc->halt_status = _halt_status; + } + + IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n" , __func__, _ifxhc->hc_num); + IFX_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n" , hcchar.d32); + IFX_DEBUGPL(DBG_HCDV, " halting: %d\n" , _ifxhc->halting); + IFX_DEBUGPL(DBG_HCDV, " halt_status: %d\n" , _ifxhc->halt_status); + + return; +} + +/*! + \brief Clears a host channel. + */ +void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc) +{ + ifxusb_hc_regs_t *hc_regs; + + _ifxhc->xfer_started = 0; + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions. + */ + hc_regs = _core_if->hc_regs[_ifxhc->hc_num]; + ifxusb_wreg(&hc_regs->hcintmsk, 0); + ifxusb_wreg(&hc_regs->hcint, 0xFFFFFFFF); + + #ifdef __HC_XFER_TIMEOUT__ + del_timer(&_ifxhc->hc_xfer_timer); + #endif + #ifdef __DEBUG__ + { + hcchar_data_t hcchar; + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + if (hcchar.b.chdis) + IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", __func__, _ifxhc->hc_num, hcchar.d32); + } + #endif +} + + + + + + + + +#ifdef __DEBUG__ + static void dump_urb_info(struct urb *_urb, char* _fn_name) + { + IFX_PRINT("%s, urb %p\n" , _fn_name, _urb); + IFX_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe)); + IFX_PRINT(" Endpoint: %d, %s\n" , usb_pipeendpoint(_urb->pipe), + (usb_pipein(_urb->pipe) ? "IN" : "OUT")); + IFX_PRINT(" Endpoint type: %s\n", + ({ char *pipetype; + switch (usb_pipetype(_urb->pipe)) { + case PIPE_CONTROL: pipetype = "CONTROL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; + default: pipetype = "UNKNOWN"; break; + }; + pipetype; + })); + IFX_PRINT(" Speed: %s\n", + ({ char *speed; + switch (_urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HIGH"; break; + case USB_SPEED_FULL: speed = "FULL"; break; + case USB_SPEED_LOW: speed = "LOW"; break; + default: speed = "UNKNOWN"; break; + }; + speed; + })); + IFX_PRINT(" Max packet size: %d\n", + usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe))); + IFX_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length); + IFX_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", + _urb->transfer_buffer, (void *)_urb->transfer_dma); + IFX_PRINT(" Setup buffer: %p, Setup DMA: %p\n", + _urb->setup_packet, (void *)_urb->setup_dma); + IFX_PRINT(" Interval: %d\n", _urb->interval); + if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) + { + int i; + for (i = 0; i < _urb->number_of_packets; i++) + { + IFX_PRINT(" ISO Desc %d:\n", i); + IFX_PRINT(" offset: %d, length %d\n", + _urb->iso_frame_desc[i].offset, + _urb->iso_frame_desc[i].length); + } + } + } + + static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh) + { + if (_epqh->hc != NULL) + { + ifxhcd_hc_t *hc = _epqh->hc; + struct list_head *item; + ifxhcd_epqh_t *epqh_item; + + ifxusb_hc_regs_t *hc_regs; + + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + + hc_regs = _ifxhcd->core_if.hc_regs[hc->hc_num]; + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + hcsplt.d32 = ifxusb_rreg(&hc_regs->hcsplt); + hctsiz.d32 = ifxusb_rreg(&hc_regs->hctsiz); + hcdma = ifxusb_rreg(&hc_regs->hcdma); + + IFX_PRINT(" Assigned to channel %d:\n" , hc->hc_num); + IFX_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + IFX_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n" , hctsiz.d32, hcdma); + IFX_PRINT(" dev_addr: %d, ep_num: %d, is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->is_in); + IFX_PRINT(" ep_type: %d\n" , hc->ep_type); + IFX_PRINT(" max_packet_size: %d\n", hc->mps); + IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start); + IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started); + IFX_PRINT(" halt_status: %d\n" , hc->halt_status); + IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff); + IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len); + IFX_PRINT(" epqh: %p\n" , hc->epqh); + IFX_PRINT(" NP Active:\n"); + list_for_each(item, &_ifxhcd->epqh_np_active) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + IFX_PRINT(" NP Ready:\n"); + list_for_each(item, &_ifxhcd->epqh_np_ready) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + IFX_PRINT(" INTR Active:\n"); + list_for_each(item, &_ifxhcd->epqh_intr_active) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + IFX_PRINT(" INTR Ready:\n"); + list_for_each(item, &_ifxhcd->epqh_intr_ready) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + #ifdef __EN_ISOC__ + IFX_PRINT(" ISOC Active:\n"); + list_for_each(item, &_ifxhcd->epqh_isoc_active) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + IFX_PRINT(" ISOC Ready:\n"); + list_for_each(item, &_ifxhcd->epqh_isoc_ready) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + #endif + IFX_PRINT(" Standby:\n"); + list_for_each(item, &_ifxhcd->epqh_stdby) + { + epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry); + IFX_PRINT(" %p\n", epqh_item); + } + } + } +#endif //__DEBUG__ + + +/*! + \brief This function writes a packet into the Tx FIFO associated with the Host + Channel. For a channel associated with a non-periodic EP, the non-periodic + Tx FIFO is written. For a channel associated with a periodic EP, the + periodic Tx FIFO is written. This function should only be called in Slave + mode. + + Upon return the xfer_buff and xfer_count fields in _hc are incremented by + then number of bytes written to the Tx FIFO. + */ + +#ifdef __ENABLE_DUMP__ + void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd) + { + int num_channels; + int i; + num_channels = _ifxhcd->core_if.params.host_channels; + IFX_PRINT("\n"); + IFX_PRINT("************************************************************\n"); + IFX_PRINT("HCD State:\n"); + IFX_PRINT(" Num channels: %d\n", num_channels); + for (i = 0; i < num_channels; i++) { + ifxhcd_hc_t *hc = &_ifxhcd->ifxhc[i]; + IFX_PRINT(" Channel %d:\n", hc->hc_num); + IFX_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->is_in); + IFX_PRINT(" speed: %d\n" , hc->speed); + IFX_PRINT(" ep_type: %d\n" , hc->ep_type); + IFX_PRINT(" mps: %d\n", hc->mps); + IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start); + IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started); + IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff); + IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len); + IFX_PRINT(" xfer_count: %d\n" , hc->xfer_count); + IFX_PRINT(" halting: %d\n" , hc->halting); + IFX_PRINT(" halt_status: %d\n" , hc->halt_status); + IFX_PRINT(" split: %d\n" , hc->split); + IFX_PRINT(" hub_addr: %d\n" , hc->hub_addr); + IFX_PRINT(" port_addr: %d\n" , hc->port_addr); + #ifdef __EN_ISOC__ + IFX_PRINT(" isoc_xact_pos: %d\n" , hc->isoc_xact_pos); + #endif + IFX_PRINT(" epqh: %p\n" , hc->epqh); + IFX_PRINT(" short_rw: %d\n" , hc->short_rw); + IFX_PRINT(" do_ping: %d\n" , hc->do_ping); + IFX_PRINT(" control_phase: %d\n" , hc->control_phase); + IFX_PRINT(" pkt_count_limit: %d\n", hc->epqh->pkt_count_limit); + IFX_PRINT(" start_pkt_count: %d\n" , hc->start_pkt_count); + } + IFX_PRINT("************************************************************\n"); + IFX_PRINT("\n"); + } +#endif //__ENABLE_DUMP__ + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd.h b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd.h new file mode 100644 index 0000000000..3a408513ce --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd.h @@ -0,0 +1,628 @@ +/***************************************************************************** + ** FILE NAME : ifxhcd.h + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : This file contains the structures, constants, and interfaces for + ** the Host Contoller Driver (HCD). + ** + ** The Host Controller Driver (HCD) is responsible for translating requests + ** from the USB Driver into the appropriate actions on the IFXUSB controller. + ** It isolates the USBD from the specifics of the controller by providing an + ** API to the USBD. + ** FUNCTIONS : + ** COMPILER : gcc + ** REFERENCE : Synopsys DWC-OTG Driver 2.7 + ** COPYRIGHT : + ** Version Control Section ** + ** $Author$ + ** $Date$ + ** $Revisions$ + ** $Log$ Revision history +*****************************************************************************/ + +/*! + \defgroup IFXUSB_HCD HCD Interface + \ingroup IFXUSB_DRIVER_V3 + \brief The Host Controller Driver (HCD) is responsible for translating requests + from the USB Driver into the appropriate actions on the IFXUSB controller. + It isolates the USBD from the specifics of the controller by providing an + API to the USBD. + */ + + +/*! + \file ifxhcd.h + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the structures, constants, and interfaces for + the Host Contoller Driver (HCD). + */ + +#if !defined(__IFXHCD_H__) +#define __IFXHCD_H__ + +#include <linux/list.h> +#include <linux/usb.h> + +#ifdef __USE_TIMER_4_SOF__ +#include <linux/hrtimer.h> +#endif +#include <linux/usb/hcd.h> + +#include "ifxusb_cif.h" +#include "ifxusb_plat.h" + + + +/*! + \addtogroup IFXUSB_HCD + */ +/*@{*/ + +/* Phases for control transfers.*/ +typedef enum ifxhcd_control_phase { + IFXHCD_CONTROL_SETUP, + IFXHCD_CONTROL_DATA, + IFXHCD_CONTROL_STATUS +} ifxhcd_control_phase_e; + +/* Reasons for halting a host channel. */ +typedef enum ifxhcd_halt_status +{ + HC_XFER_NO_HALT_STATUS, // Initial + HC_XFER_COMPLETE, // Xact complete without error, upward + HC_XFER_URB_COMPLETE, // Xfer complete without error, short upward + HC_XFER_STALL, // HC stopped abnormally, upward/downward + HC_XFER_XACT_ERR, // HC stopped abnormally, upward + HC_XFER_FRAME_OVERRUN, // HC stopped abnormally, upward + HC_XFER_BABBLE_ERR, // HC stopped abnormally, upward + HC_XFER_AHB_ERR, // HC stopped abnormally, upward + HC_XFER_DATA_TOGGLE_ERR, + HC_XFER_URB_DEQUEUE, // HC stopper manually, downward + HC_XFER_NAK // HC stopped by nak monitor, downward +} ifxhcd_halt_status_e; + +struct ifxhcd_urbd; +struct ifxhcd_hc ; +struct ifxhcd_epqh ; +struct ifxhcd_hcd; + +/*! + \brief A URB Descriptor (URBD) holds the state of a bulk, control, + interrupt, or isochronous transfer. A single URBD is created for each URB + (of one of these types) submitted to the HCD. The transfer associated with + a URBD may require one or multiple transactions. + + A URBD is linked to a EP Queue Head, which is entered in either the + isoc, intr or non-periodic schedule for execution. When a URBD is chosen for + execution, some or all of its transactions may be executed. After + execution, the state of the URBD is updated. The URBD may be retired if all + its transactions are complete or if an error occurred. Otherwise, it + remains in the schedule so more transactions can be executed later. + */ +typedef struct ifxhcd_urbd { + struct list_head urbd_list_entry; // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list + struct urb *urb; /*!< URB for this transfer */ + //struct urb { + // struct list_head urb_list; + // struct list_head anchor_list; + // struct usb_anchor * anchor; + // struct usb_device * dev; + // struct usb_host_endpoint * ep; + // unsigned int pipe; + // int status; + // unsigned int transfer_flags; + // void * transfer_buffer; + // dma_addr_t transfer_dma; + // u32 transfer_buffer_length; + // u32 actual_length; + // unsigned char * setup_packet; + // dma_addr_t setup_dma; + // int start_frame; + // int number_of_packets; + // int interval; + // int error_count; + // void * context; + // usb_complete_t complete; + // struct usb_iso_packet_descriptor iso_frame_desc[0]; + //}; + //urb_list For use by current owner of the URB. + //anchor_list membership in the list of an anchor + //anchor to anchor URBs to a common mooring + //dev Identifies the USB device to perform the request. + //ep Points to the endpoint's data structure. Will + // eventually replace pipe. + //pipe Holds endpoint number, direction, type, and more. + // Create these values with the eight macros available; u + // sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is + // "ctrl", "bulk", "int" or "iso". For example + // usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers + // range from zero to fifteen. Note that "in" endpoint two + // is a different endpoint (and pipe) from "out" endpoint + // two. The current configuration controls the existence, + // type, and maximum packet size of any given endpoint. + //status This is read in non-iso completion functions to get + // the status of the particular request. ISO requests + // only use it to tell whether the URB was unlinked; + // detailed status for each frame is in the fields of + // the iso_frame-desc. + //transfer_flags A variety of flags may be used to affect how URB + // submission, unlinking, or operation are handled. + // Different kinds of URB can use different flags. + // URB_SHORT_NOT_OK + // URB_ISO_ASAP + // URB_NO_TRANSFER_DMA_MAP + // URB_NO_SETUP_DMA_MAP + // URB_NO_FSBR + // URB_ZERO_PACKET + // URB_NO_INTERRUPT + //transfer_buffer This identifies the buffer to (or from) which the I/O + // request will be performed (unless URB_NO_TRANSFER_DMA_MAP + // is set). This buffer must be suitable for DMA; allocate it + // with kmalloc or equivalent. For transfers to "in" + // endpoints, contents of this buffer will be modified. This + // buffer is used for the data stage of control transfers. + //transfer_dma When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the + // device driver is saying that it provided this DMA address, + // which the host controller driver should use in preference + // to the transfer_buffer. + //transfer_buffer_length How big is transfer_buffer. The transfer may be broken + // up into chunks according to the current maximum packet size + // for the endpoint, which is a function of the configuration + // and is encoded in the pipe. When the length is zero, neither + // transfer_buffer nor transfer_dma is used. + //actual_length This is read in non-iso completion functions, and it tells + // how many bytes (out of transfer_buffer_length) were transferred. + // It will normally be the same as requested, unless either an error + // was reported or a short read was performed. The URB_SHORT_NOT_OK + // transfer flag may be used to make such short reads be reported + // as errors. + //setup_packet Only used for control transfers, this points to eight bytes of + // setup data. Control transfers always start by sending this data + // to the device. Then transfer_buffer is read or written, if needed. + //setup_dma For control transfers with URB_NO_SETUP_DMA_MAP set, the device + // driver has provided this DMA address for the setup packet. The + // host controller driver should use this in preference to setup_packet. + //start_frame Returns the initial frame for isochronous transfers. + //number_of_packets Lists the number of ISO transfer buffers. + //interval Specifies the polling interval for interrupt or isochronous transfers. + // The units are frames (milliseconds) for for full and low speed devices, + // and microframes (1/8 millisecond) for highspeed ones. + //error_count Returns the number of ISO transfers that reported errors. + //context For use in completion functions. This normally points to request-specific + // driver context. + //complete Completion handler. This URB is passed as the parameter to the completion + // function. The completion function may then do what it likes with the URB, + // including resubmitting or freeing it. + //iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer + // status for each buffer. + + struct ifxhcd_epqh *epqh; + // Actual data portion, not SETUP or STATUS in case of CTRL XFER + // DMA adjusted + uint8_t *setup_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/ + uint8_t *xfer_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/ + uint32_t xfer_len; /*!< Total number of bytes to transfer in this xfer. */ + unsigned is_in :1; + unsigned is_active:1; + + // For ALL XFER + uint8_t error_count; /*!< Holds the number of bus errors that have occurred for a transaction + within this transfer. + */ + /*== AVM/BC 20101111 Needed for URB Complete List ==*/ + int status; + // For ISOC XFER only + #ifdef __EN_ISOC__ + int isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A + frame descriptor describes the buffer position and length of the + data to be transferred in the next scheduled (micro)frame of an + isochronous transfer. It also holds status for that transaction. + The frame index starts at 0. + */ + // For SPLITed ISOC XFER only + uint8_t isoc_split_pos; /*!< Position of the ISOC split on full/low speed */ + uint16_t isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */ + #endif +} ifxhcd_urbd_t; + +/*! + \brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and + maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may + be entered in either the isoc, intr or non-periodic schedule. + */ + +typedef struct ifxhcd_epqh { + struct list_head epqh_list_entry; // Hook for EP Queues + struct list_head urbd_list; /*!< List of URBDs for this EPQH. */ + struct ifxhcd_hc *hc; /*!< Host channel currently processing transfers for this EPQH. */ + struct ifxhcd_urbd *urbd; /*!< URBD currently assigned to a host channel for this EPQH. */ + struct usb_host_endpoint *sysep; + uint8_t ep_type; /*!< Endpoint type. One of the following values: + - IFXUSB_EP_TYPE_CTRL + - IFXUSB_EP_TYPE_ISOC + - IFXUSB_EP_TYPE_BULK + - IFXUSB_EP_TYPE_INTR + */ + uint16_t mps; /*!< wMaxPacketSize Field of Endpoint Descriptor. */ + + /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/ + /*uint8_t data_toggle;*/ /*!< Determines the PID of the next data packet + One of the following values: + - IFXHCD_HC_PID_DATA0 + - IFXHCD_HC_PID_DATA1 + */ + uint8_t is_active; + + uint8_t pkt_count_limit; + #ifdef __EPQD_DESTROY_TIMEOUT__ + struct timer_list destroy_timer; + #endif + + uint16_t wait_for_sof; + uint8_t need_split; /*!< Full/low speed endpoint on high-speed hub requires split. */ + uint16_t interval; /*!< Interval between transfers in (micro)frames. (for INTR)*/ + + uint16_t period_counter; /*!< Interval between transfers in (micro)frames. */ + uint8_t period_do; + + uint8_t aligned_checked; + + #if defined(__UNALIGNED_BUFFER_ADJ__) + uint8_t using_aligned_setup; + uint8_t *aligned_setup; + uint8_t using_aligned_buf; + uint8_t *aligned_buf; + unsigned aligned_buf_len : 19; + #endif + + uint8_t *dump_buf; +} ifxhcd_epqh_t; + + +#if defined(__HC_XFER_TIMEOUT__) + struct ifxusb_core_if; + struct ifxhcd_hc; + typedef struct hc_xfer_info + { + struct ifxusb_core_if *core_if; + struct ifxhcd_hc *hc; + } hc_xfer_info_t; +#endif //defined(__HC_XFER_TIMEOUT__) + + +/*! + \brief Host channel descriptor. This structure represents the state of a single + host channel when acting in host mode. It contains the data items needed to + transfer packets to an endpoint via a host channel. + */ +typedef struct ifxhcd_hc +{ + struct list_head hc_list_entry ; // Hook to free hc + struct ifxhcd_epqh *epqh ; /*!< EP Queue Head for the transfer being processed by this channel. */ + + uint8_t hc_num ; /*!< Host channel number used for register address lookup */ + uint8_t *xfer_buff ; /*!< Pointer to the entire transfer buffer. */ + uint32_t xfer_count ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */ + uint32_t xfer_len ; /*!< Total number of bytes to transfer in this xfer. */ + uint16_t start_pkt_count ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/ + ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */ + + unsigned dev_addr : 7; /*!< Device to access */ + unsigned ep_num : 4; /*!< EP to access */ + unsigned is_in : 1; /*!< EP direction. 0: OUT, 1: IN */ + unsigned speed : 2; /*!< EP speed. */ + unsigned ep_type : 2; /*!< Endpoint type. */ + unsigned mps :11; /*!< Max packet size in bytes */ + unsigned data_pid_start : 2; /*!< PID for initial transaction. */ + unsigned do_ping : 1; /*!< Set to 1 to indicate that a PING request should be issued on this + channel. If 0, process normally. + */ + + unsigned xfer_started : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if + it has been started, 0 otherwise. + */ + unsigned halting : 1; /*!< Set to 1 if the host channel has been halted, but the core is not + finished flushing queued requests. Otherwise 0. + */ + unsigned short_rw : 1; /*!< When Tx, means termination needed. + When Rx, indicate Short Read */ + /* Split settings for the host channel */ + unsigned split : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */ + + /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/ + unsigned nyet_count; + + /* nak monitor */ + unsigned nak_retry_r : 16; + unsigned nak_retry : 16; + #define nak_retry_max 40000 + unsigned nak_countdown : 8; + unsigned nak_countdown_r: 8; + #define nak_countdown_max 1 + + uint16_t wait_for_sof; + ifxhcd_control_phase_e control_phase; /*!< Current phase for control transfers (Setup, Data, or Status). */ + uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */ + #ifdef __DEBUG__ + uint32_t start_hcchar_val; + #endif + #ifdef __HC_XFER_TIMEOUT__ + hc_xfer_info_t hc_xfer_info; + struct timer_list hc_xfer_timer; + #endif + uint32_t hcchar; + + /* Split settings for the host channel */ + uint8_t hub_addr; /*!< Address of high speed hub */ + uint8_t port_addr; /*!< Port of the low/full speed device */ + #ifdef __EN_ISOC__ + uint8_t isoc_xact_pos; /*!< Split transaction position */ + #endif +} ifxhcd_hc_t; + + +/*! + \brief This structure holds the state of the HCD, including the non-periodic and + periodic schedules. + */ +typedef struct ifxhcd_hcd +{ + struct device *dev; + struct hc_driver hc_driver; + ifxusb_core_if_t core_if; /*!< Pointer to the core interface structure. */ + struct usb_hcd *syshcd; + + volatile union ifxhcd_internal_flags + { + uint32_t d32; + struct + { + unsigned port_connect_status_change : 1; + unsigned port_connect_status : 1; + unsigned port_reset_change : 1; + unsigned port_enable_change : 1; + unsigned port_suspend_change : 1; + unsigned port_over_current_change : 1; + unsigned reserved : 27; + } b; + } flags; /*!< Internal HCD Flags */ + + struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS]; /*!< Array of pointers to the host channel descriptors. Allows accessing + a host channel descriptor given the host channel number. This is + useful in interrupt handlers. + */ + struct list_head free_hc_list; /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */ + uint8_t *status_buf; /*!< Buffer to use for any data received during the status phase of a + control transfer. Normally no data is transferred during the status + phase. This buffer is used as a bit bucket. + */ + #define IFXHCD_STATUS_BUF_SIZE 64 + + struct list_head epqh_np_active; // with URBD, with HC + struct list_head epqh_np_ready; // with URBD, No HC + + struct list_head epqh_intr_active; // with URBD, with HC + struct list_head epqh_intr_ready; // with URBD, no pass, No HC + + #ifdef __EN_ISOC__ + struct list_head epqh_isoc_active; // with URBD, with HC + struct list_head epqh_isoc_ready; // with URBD, no pass, No HC + #endif + + /*== AVM/BC 20101111 URB Complete List ==*/ + struct list_head urbd_complete_list; + + struct list_head epqh_stdby; + + /* AVM/BC 20101111 flags removed */ + //unsigned process_channels_in_use : 1; + //unsigned select_eps_in_use : 1; + + struct tasklet_struct select_eps; /*!< Tasket to do a reset */ + uint32_t lastframe; + spinlock_t lock; +#ifdef __USE_TIMER_4_SOF__ + struct hrtimer hr_timer; +#endif +} ifxhcd_hcd_t; + +/* Gets the ifxhcd_hcd from a struct usb_hcd */ +static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd) +{ + return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]); +} + +/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */ +static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd) +{ + return (struct usb_hcd *)(ifxhcd->syshcd); +} + +/*! \brief HCD Create/Destroy Functions */ +/*@{*/ + extern int ifxhcd_init (ifxhcd_hcd_t *_ifxhcd); + extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd); +/*@}*/ + +/*! \brief Linux HC Driver API Functions */ +/*@{*/ +extern int ifxhcd_start(struct usb_hcd *hcd); +extern void ifxhcd_stop (struct usb_hcd *hcd); +extern int ifxhcd_get_frame_number(struct usb_hcd *hcd); + + +/*! + \brief This function does the setup for a data transfer for a host channel and + starts the transfer. May be called in either Slave mode or DMA mode. In + Slave mode, the caller must ensure that there is sufficient space in the + request queue and Tx Data FIFO. + + For an OUT transfer in Slave mode, it loads a data packet into the + appropriate FIFO. If necessary, additional data packets will be loaded in + the Host ISR. + + For an IN transfer in Slave mode, a data packet is requested. The data + packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + additional data packets are requested in the Host ISR. + + For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + register along with a packet count of 1 and the channel is enabled. This + causes a single PING transaction to occur. Other fields in HCTSIZ are + simply set to 0 since no data transfer occurs in this case. + + For a PING transfer in DMA mode, the HCTSIZ register is initialized with + all the information required to perform the subsequent data transfer. In + addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + controller performs the entire PING protocol, then starts the data + transfer. + + @param _ifxhc Information needed to initialize the host channel. The xfer_len + value may be reduced to accommodate the max widths of the XferSize and + PktCnt fields in the HCTSIZn register. The multi_count value may be changed + to reflect the final xfer_len value. + */ +extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc); + +//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags); +//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb); +extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd); +int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd, + /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/ + struct urb *_urb, + gfp_t _mem_flags); +int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd, + struct urb *_urb, int status /* Parameter neu in 2.6.28 */); + +extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep); + +extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf); +extern int ifxhcd_hub_control( struct usb_hcd *_syshcd, + u16 _typeReq, + u16 _wValue, + u16 _wIndex, + char *_buf, + u16 _wLength); + +/*@}*/ + +/*! \brief Transaction Execution Functions */ +/*@{*/ +extern void ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status); + +/*@}*/ + +/*! \brief Deferred Transaction Execution Functions */ +/*@{*/ + +/*== AVM/BC 20101111 URB Complete List ==*/ +extern void defer_ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status); + +/*! + \brief Clears the transfer state for a host channel. This function is normally + called after a transfer is done and the host channel is being released. + */ +extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc); + +/*! + \brief Attempts to halt a host channel. This function should only be called in + Slave mode or to abort a transfer in either Slave mode or DMA mode. Under + normal circumstances in DMA mode, the controller halts the channel when the + transfer is complete or a condition occurs that requires application + intervention. + + In slave mode, checks for a free request queue entry, then sets the Channel + Enable and Channel Disable bits of the Host Channel Characteristics + register of the specified channel to intiate the halt. If there is no free + request queue entry, sets only the Channel Disable bit of the HCCHARn + register to flush requests for this channel. In the latter case, sets a + flag to indicate that the host channel needs to be halted when a request + queue slot is open. + + In DMA mode, always sets the Channel Enable and Channel Disable bits of the + HCCHARn register. The controller ensures there is space in the request + queue before submitting the halt request. + + Some time may elapse before the core flushes any posted requests for this + host channel and halts. The Channel Halted interrupt handler completes the + deactivation of the host channel. + */ +extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if, + ifxhcd_hc_t *_ifxhc, + ifxhcd_halt_status_e _halt_status); + +/*! + \brief Prepares a host channel for transferring packets to/from a specific + endpoint. The HCCHARn register is set up with the characteristics specified + in _ifxhc. Host channel interrupts that may need to be serviced while this + transfer is in progress are enabled. + */ +extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc); + +/*! + \brief This function is called to handle the disconnection of host port. + */ +int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd); +/*@}*/ + +/*! \brief Interrupt Handler Functions */ +/*@{*/ +extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev); + +extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd); +extern int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd); +/*@}*/ + + +/*! \brief Schedule Queue Functions */ +/*@{*/ +extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb); +extern void ifxhcd_epqh_free ( ifxhcd_epqh_t *_epqh); +extern void select_eps (ifxhcd_hcd_t *_ifxhcd); +extern void process_channels(ifxhcd_hcd_t *_ifxhcd); +extern void process_channels_sub(ifxhcd_hcd_t *_ifxhcd); +extern void complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd); +extern void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh); +extern void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh); +extern void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh); +extern void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh); +extern int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb); +/*@}*/ + +/*! \brief Gets the usb_host_endpoint associated with an URB. */ +static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb) +{ + struct usb_device *dev = _urb->dev; + int ep_num = usb_pipeendpoint(_urb->pipe); + + return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]); +} + +/*! + * \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is + * qualified with its direction (possible 32 endpoints per device). + */ +#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ + ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) + + +/* AVM/WK: not needed? + +extern struct usb_device *usb_alloc_dev (struct usb_device *parent, struct usb_bus *, unsigned port); +extern int usb_add_hcd (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags); +extern void usb_remove_hcd (struct usb_hcd *syshcd); +extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name); +extern void usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb); +extern void usb_put_hcd (struct usb_hcd *syshcd); +extern long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount); + +*/ +/** Internal Functions */ +void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd); +extern char *syserr(int errno); + +/*@}*//*IFXUSB_HCD*/ + +#endif // __IFXHCD_H__ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_es.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_es.c new file mode 100644 index 0000000000..ef9e8c05ef --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_es.c @@ -0,0 +1,549 @@ +/***************************************************************************** + ** FILE NAME : ifxhcd_es.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : The file contain function to enable host mode USB-IF Electrical Test function. + *****************************************************************************/ + +/*! + \file ifxhcd_es.c + \ingroup IFXUSB_DRIVER_V3 + \brief The file contain function to enable host mode USB-IF Electrical Test function. +*/ + +#include <linux/version.h> +#include "ifxusb_version.h" + +#include <linux/kernel.h> + +#include <linux/errno.h> + +#include <linux/dma-mapping.h> + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" +#include "ifxhcd.h" + + +#ifdef __WITH_HS_ELECT_TST__ + /* + * Quick and dirty hack to implement the HS Electrical Test + * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. + * + * This code was copied from our userspace app "hset". It sends a + * Get Device Descriptor control sequence in two parts, first the + * Setup packet by itself, followed some time later by the In and + * Ack packets. Rather than trying to figure out how to add this + * functionality to the normal driver code, we just hijack the + * hardware, using these two function to drive the hardware + * directly. + */ + + + void do_setup(ifxusb_core_if_t *_core_if) + { + + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs; + ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0]; + uint32_t *data_fifo = _core_if->data_fifo[0]; + + gint_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + + + /* Enable HAINTs */ + ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Send Setup packet (Get Device Descriptor) + */ + + /* Make sure channel is disabled */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + // hcchar.b.chen = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = IFXUSB_HC_PID_SETUP; + ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + + /* Fill FIFO with Setup data for Get Device Descriptor */ + ifxusb_wreg(data_fifo++, 0x01000680); + ifxusb_wreg(data_fifo++, 0x00080000); + + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + ifxusb_wreg(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + } + + void do_in_ack(ifxusb_core_if_t *_core_if) + { + + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs; + ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0]; + uint32_t *data_fifo = _core_if->data_fifo[0]; + + gint_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + grxsts_data_t grxsts; + + /* Enable HAINTs */ + ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Receive Control In packet + */ + + /* Make sure channel is disabled */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = IFXUSB_HC_PID_DATA1; + ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL; + hcchar.b.epdir = 1; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.hb.pktsts) { + case IFXUSB_HSTS_DATA_UPDT: + /* Read the data into the host buffer */ + if (grxsts.hb.bcnt > 0) { + int i; + int word_count = (grxsts.hb.bcnt + 3) / 4; + + for (i = 0; i < word_count; i++) { + (void)ifxusb_rreg(data_fifo++); + } + } + + //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.hb.bcnt); + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); + break; + } + + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.hb.pktsts) { + case IFXUSB_HSTS_XFER_COMP: + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); + break; + } + + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + // usleep(100000); + // mdelay(100); + mdelay(1); + + /* + * Send handshake packet + */ + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Make sure channel is disabled */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 0; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = IFXUSB_HC_PID_DATA1; + ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + ifxusb_wreg(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + ifxusb_wreg(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = ifxusb_rreg(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = ifxusb_rreg(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + ifxusb_wreg(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + ifxusb_wreg(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = ifxusb_rreg(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + } +#endif //__WITH_HS_ELECT_TST__ + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_intr.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_intr.c new file mode 100644 index 0000000000..76fe602c76 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_intr.c @@ -0,0 +1,3742 @@ +/***************************************************************************** + ** FILE NAME : ifxhcd_intr.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : This file contains the implementation of the HCD Interrupt handlers. + *****************************************************************************/ + +/*! + \file ifxhcd_intr.c + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the implementation of the HCD Interrupt handlers. +*/ + + +#include <linux/version.h> +#include "ifxusb_version.h" + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" + +#include "ifxhcd.h" + +/* AVM/WK 20100520*/ +#ifdef __EN_ISOC__ +#error AVM/WK: CONFIG_USB_HOST_IFX_WITH_ISO currently not supported! +#endif + +/* Macro used to clear one channel interrupt */ +#define clear_hc_int(_hc_regs_,_intr_) \ + do { \ + hcint_data_t hcint_clear = {.d32 = 0}; \ + hcint_clear.b._intr_ = 1; \ + ifxusb_wreg(&((_hc_regs_)->hcint), hcint_clear.d32); \ + } while (0) + +/* + * Macro used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +#define disable_hc_int(_hc_regs_,_intr_) \ + do { \ + hcint_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ + ifxusb_mreg(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \ + } while (0) + +#define enable_hc_int(_hc_regs_,_intr_) \ + do { \ + hcint_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ + ifxusb_mreg(&((_hc_regs_)->hcintmsk),0, hcintmsk.d32); \ + } while (0) + +/* + * Save the starting data toggle for the next transfer. The data toggle is + * saved in the QH for non-control transfers and it's saved in the QTD for + * control transfers. + */ +uint8_t read_data_toggle(ifxusb_hc_regs_t *_hc_regs) +{ + hctsiz_data_t hctsiz; + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + return(hctsiz.b.pid); +} + + +static void release_channel_dump(ifxhcd_hc_t *ifxhc, + struct urb *urb, + ifxhcd_epqh_t *epqh, + ifxhcd_urbd_t *urbd, + ifxhcd_halt_status_e halt_status) +{ + #ifdef __DEBUG__ + printk(KERN_INFO); + switch (halt_status) + { + case HC_XFER_NO_HALT_STATUS: + printk("HC_XFER_NO_HALT_STATUS");break; + case HC_XFER_URB_COMPLETE: + printk("HC_XFER_URB_COMPLETE");break; + case HC_XFER_AHB_ERR: + printk("HC_XFER_AHB_ERR");break; + case HC_XFER_STALL: + printk("HC_XFER_STALL");break; + case HC_XFER_BABBLE_ERR: + printk("HC_XFER_BABBLE_ERR");break; + case HC_XFER_XACT_ERR: + printk("HC_XFER_XACT_ERR");break; + case HC_XFER_URB_DEQUEUE: + printk("HC_XFER_URB_DEQUEUE");break; + case HC_XFER_FRAME_OVERRUN: + printk("HC_XFER_FRAME_OVERRUN");break; + case HC_XFER_DATA_TOGGLE_ERR: + printk("HC_XFER_DATA_TOGGLE_ERR");break; + case HC_XFER_NAK: + printk("HC_XFER_NAK");break; + case HC_XFER_COMPLETE: + printk("HC_XFER_COMPLETE");break; + default: + printk("KNOWN");break; + } + if(ifxhc) + printk("Ch %d %s%s S%d " , ifxhc->hc_num + ,(ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL)?"CTRL-": + ((ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)?"BULK-": + ((ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)?"INTR-": + ((ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)?"ISOC-":"????" + ) + ) + ) + ,(ifxhc->is_in)?"IN":"OUT" + ,(ifxhc->split) + ); + else + printk(" [NULL HC] "); + printk("urb=%p epqh=%p urbd=%p\n",urb,epqh,urbd); + + if(urb) + { + printk(KERN_INFO " Device address: %d\n", usb_pipedevice(urb->pipe)); + printk(KERN_INFO " Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), + (usb_pipein(urb->pipe) ? "IN" : "OUT")); + printk(KERN_INFO " Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: pipetype = "CTRL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTR"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break; + default: pipetype = "????"; break; + }; pipetype;})); + printk(KERN_INFO " Speed: %s\n", + ({char *speed; + switch (urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HS"; break; + case USB_SPEED_FULL: speed = "FS"; break; + case USB_SPEED_LOW: speed = "LS"; break; + default: speed = "????"; break; + }; speed;})); + printk(KERN_INFO " Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + printk(KERN_INFO " Data buffer length: %d\n", urb->transfer_buffer_length); + printk(KERN_INFO " Transfer buffer: %p, Transfer DMA: %p\n", + urb->transfer_buffer, (void *)urb->transfer_dma); + printk(KERN_INFO " Setup buffer: %p, Setup DMA: %p\n", + urb->setup_packet, (void *)urb->setup_dma); + printk(KERN_INFO " Interval: %d\n", urb->interval); + switch (urb->status) + { + case HC_XFER_NO_HALT_STATUS: + printk(KERN_INFO " STATUS:HC_XFER_NO_HALT_STATUS\n");break; + case HC_XFER_URB_COMPLETE: + printk(KERN_INFO " STATUS:HC_XFER_URB_COMPLETE\n");break; + case HC_XFER_AHB_ERR: + printk(KERN_INFO " STATUS:HC_XFER_AHB_ERR\n");break; + case HC_XFER_STALL: + printk(KERN_INFO " STATUS:HC_XFER_STALL\n");break; + case HC_XFER_BABBLE_ERR: + printk(KERN_INFO " STATUS:HC_XFER_BABBLE_ERR\n");break; + case HC_XFER_XACT_ERR: + printk(KERN_INFO " STATUS:HC_XFER_XACT_ERR\n");break; + case HC_XFER_URB_DEQUEUE: + printk(KERN_INFO " STATUS:HC_XFER_URB_DEQUEUE\n");break; + case HC_XFER_FRAME_OVERRUN: + printk(KERN_INFO " STATUS:HC_XFER_FRAME_OVERRUN\n");break; + case HC_XFER_DATA_TOGGLE_ERR: + printk(KERN_INFO " STATUS:HC_XFER_DATA_TOGGLE_ERR\n");break; + case HC_XFER_COMPLETE: + printk(KERN_INFO " STATUS:HC_XFER_COMPLETE\n");break; + default: + printk(KERN_INFO " STATUS:KNOWN\n");break; + } + } + #endif +} + + +static void release_channel(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxhcd_halt_status_e _halt_status) +{ + ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num]; + struct urb *urb = NULL; + ifxhcd_epqh_t *epqh = NULL; + ifxhcd_urbd_t *urbd = NULL; + + IFX_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", + __func__, _ifxhc->hc_num, _halt_status); + + epqh=_ifxhc->epqh; + + if(!epqh) + IFX_ERROR("%s epqh=null\n",__func__); + else + { + urbd=epqh->urbd; + if(!urbd) + IFX_ERROR("%s urbd=null\n",__func__); + else + { + urb=urbd->urb; + if(!urb) + IFX_ERROR("%s urb =null\n",__func__); + else { + /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/ + unsigned toggle = (read_data_toggle(hc_regs) == IFXUSB_HC_PID_DATA0)? 0: 1; + usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), usb_pipeout(urb->pipe), toggle); + } + } + //epqh->data_toggle = read_data_toggle(hc_regs); + + } + + switch (_halt_status) + { + case HC_XFER_NO_HALT_STATUS: + IFX_ERROR("%s: No halt_status, channel %d\n", __func__, _ifxhc->hc_num); + break; + case HC_XFER_COMPLETE: + IFX_ERROR("%s: Inavalid halt_status HC_XFER_COMPLETE, channel %d\n", __func__, _ifxhc->hc_num); + break; + case HC_XFER_URB_COMPLETE: + case HC_XFER_URB_DEQUEUE: + case HC_XFER_AHB_ERR: + case HC_XFER_XACT_ERR: + case HC_XFER_FRAME_OVERRUN: + if(urbd && urb) { + /* == 20110803 AVM/WK FIX set status, if still in progress == */ + if (urb->status == -EINPROGRESS) { + switch (_halt_status) { + case HC_XFER_URB_COMPLETE: + urb->status = 0; + break; + case HC_XFER_URB_DEQUEUE: + urb->status = -ECONNRESET; + break; + case HC_XFER_AHB_ERR: + case HC_XFER_XACT_ERR: + case HC_XFER_FRAME_OVERRUN: + urb->status = -EPROTO; + break; + default: + break; + } + } + /*== AVM/BC 20101111 Deferred Complete ==*/ + defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status); + } + else + { + IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb); + release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status); + } + if(epqh) + ifxhcd_epqh_idle(_ifxhcd, epqh); + else + { + IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh); + release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status); + } + + list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list); + ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc); + break; + case HC_XFER_STALL: + release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status); + if(urbd) + /*== AVM/BC 20101111 Deferred Complete ==*/ + defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EPIPE); + else + IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb); + if(epqh) + { +// epqh->data_toggle = 0; + ifxhcd_epqh_idle(_ifxhcd, epqh); + } + else + IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh); + list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list); + ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc); + break; + case HC_XFER_NAK: + release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status); + if(urbd) + { + //ifxhcd_complete_urb(_ifxhcd, urbd, -ETIMEDOUT); + urb->status = 0; + /*== AVM/BC 20101111 Deferred Complete ==*/ + defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status); + } + else + IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb); + if(epqh) + ifxhcd_epqh_idle(_ifxhcd, epqh); + else + IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh); + list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list); + ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc); + break; + case HC_XFER_BABBLE_ERR: + case HC_XFER_DATA_TOGGLE_ERR: + release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status); + if(urbd) + /*== AVM/BC 20101111 Deferred Complete ==*/ + defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EOVERFLOW); + else + IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb); + if(epqh) + ifxhcd_epqh_idle(_ifxhcd, epqh); + else + IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh); + list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list); + ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc); + break; + } + select_eps(_ifxhcd); +} + +/* + * Updates the state of the URB after a Transfer Complete interrupt on the + * host channel. Updates the actual_length field of the URB based on the + * number of bytes transferred via the host channel. Sets the URB status + * if the data transfer is finished. + * + * @return 1 if the data transfer specified by the URB is completely finished, + * 0 otherwise. + */ +static int update_urb_state_xfer_comp(ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + struct urb *_urb, + ifxhcd_urbd_t *_urbd) +{ + int xfer_done = 0; + + if (_ifxhc->is_in) + { + hctsiz_data_t hctsiz; + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + _urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + if ((hctsiz.b.xfersize != 0) || (_urb->actual_length >= _urb->transfer_buffer_length)) + { + xfer_done = 1; + _urb->status = 0; + /* 20110805 AVM/WK Workaround: catch overflow error here, hardware does not */ + if (_urb->actual_length > _urb->transfer_buffer_length) { + _urb->status = -EOVERFLOW; + } + #if 0 + if (_urb->actual_length < _urb->transfer_buffer_length && _urb->transfer_flags & URB_SHORT_NOT_OK) + _urb->status = -EREMOTEIO; + #endif + } + + } + else + { + if (_ifxhc->split) + _urb->actual_length += _ifxhc->ssplit_out_xfer_count; + else + _urb->actual_length += _ifxhc->xfer_len; + + if (_urb->actual_length >= _urb->transfer_buffer_length) + { + /*== AVM/BC WK 20110421 ZERO PACKET Workaround ==*/ + if ((_ifxhc->short_rw == 1) && ( _ifxhc->xfer_len > 0) && ( _ifxhc->xfer_len % _ifxhc->mps == 0 )) + { + _ifxhc->short_rw = 0; + //Transfer not finished. Another iteration for ZLP. + } + else + { + xfer_done = 1; + } + _urb->status = 0; + } + } + + #ifdef __DEBUG__ + { + hctsiz_data_t hctsiz; + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + IFX_DEBUGPL(DBG_HCDV, "IFXUSB: %s: %s, channel %d\n", + __func__, (_ifxhc->is_in ? "IN" : "OUT"), _ifxhc->hc_num); + IFX_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _ifxhc->xfer_len); + IFX_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize); + IFX_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", + _urb->transfer_buffer_length); + IFX_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length); + } + #endif + return xfer_done; +} + +/*== AVM/BC 20101111 Function called with Lock ==*/ + +void complete_channel(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxhcd_urbd_t *_urbd) +{ + ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num]; + struct urb *urb = NULL; + ifxhcd_epqh_t *epqh = NULL; + int urb_xfer_done; + + IFX_DEBUGPL(DBG_HCD, "--Complete Channel %d : \n", _ifxhc->hc_num); + + if(!_urbd) + { + IFX_ERROR("ERROR %s():%d urbd=%p\n",__func__,__LINE__,_urbd); + return; + } + + urb = _urbd->urb; + epqh = _urbd->epqh; + + if(!urb || !epqh) + { + IFX_ERROR("ERROR %s():%d urb=%p epqh=%p\n",__func__,__LINE__,urb,epqh); + return; + } + + _ifxhc->do_ping=0; + + if (_ifxhc->split) + _ifxhc->split = 1; + + switch (epqh->ep_type) + { + case IFXUSB_EP_TYPE_CTRL: + switch (_ifxhc->control_phase) + { + case IFXHCD_CONTROL_SETUP: + IFX_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); + if (_urbd->xfer_len > 0) + { + _ifxhc->control_phase = IFXHCD_CONTROL_DATA; + _ifxhc->is_in = _urbd->is_in; + _ifxhc->xfer_len = _urbd->xfer_len; + #if defined(__UNALIGNED_BUFFER_ADJ__) + if(epqh->using_aligned_buf) + _ifxhc->xfer_buff = epqh->aligned_buf; + else + #endif + _ifxhc->xfer_buff = _urbd->xfer_buff; + } + else + { + _ifxhc->control_phase = IFXHCD_CONTROL_STATUS; + _ifxhc->is_in = 1; + _ifxhc->xfer_len = 0; + _ifxhc->xfer_buff = _ifxhcd->status_buf; + } + if(_ifxhc->is_in) + _ifxhc->short_rw =0; + else + _ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0; + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + _ifxhc->xfer_count = 0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + /*== AVM/BC 20101111 Lock not needed ==*/ + process_channels_sub(_ifxhcd); + break; + case IFXHCD_CONTROL_DATA: + urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd); + if (urb_xfer_done) + { + _ifxhc->control_phase = IFXHCD_CONTROL_STATUS; + _ifxhc->is_in = (_urbd->is_in)?0:1; + _ifxhc->xfer_len = 0; + _ifxhc->xfer_count = 0; + _ifxhc->xfer_buff = _ifxhcd->status_buf; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + if(_ifxhc->is_in) + _ifxhc->short_rw =0; + else + _ifxhc->short_rw =1; + } + else // continue + { + _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length; + _ifxhc->xfer_count = urb->actual_length; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->data_pid_start = read_data_toggle(hc_regs); + } + /*== AVM/BC 20101111 Lock not needed ==*/ + process_channels_sub(_ifxhcd); + break; + case IFXHCD_CONTROL_STATUS: + if (urb->status == -EINPROGRESS) + urb->status = 0; + release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE); + break; + } + break; + case IFXUSB_EP_TYPE_BULK: + IFX_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); + urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd); + if (urb_xfer_done) + release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE); + else + { + _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length; + _ifxhc->xfer_count = urb->actual_length; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->data_pid_start = read_data_toggle(hc_regs); + /*== AVM/BC 20101111 Lock not needed ==*/ + process_channels_sub(_ifxhcd); + } + break; + case IFXUSB_EP_TYPE_INTR: + urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd); + release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE); + break; + case IFXUSB_EP_TYPE_ISOC: +// if (_urbd->isoc_split_pos == IFXUSB_HCSPLIT_XACTPOS_ALL) +// halt_status = update_isoc_urb_state(_ifxhcd, _ifxhc, hc_regs, _urbd, HC_XFER_COMPLETE); +// complete_periodic_xfer(_ifxhcd, _ifxhc, hc_regs, _urbd, halt_status); + urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd); + release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE); + break; + } +} + + + +void showint(uint32_t val_hcint + ,uint32_t val_hcintmsk + ,uint32_t val_hctsiz) +{ +#ifdef __DEBUG__ + hcint_data_t hcint = {.d32 = val_hcint}; + hcint_data_t hcintmsk = {.d32 = val_hcintmsk}; + + printk(KERN_INFO " WITH FLAG: Sz:%08x I:%08X/M:%08X %s%s%s%s%s%s%s%s%s%s\n" + ,val_hctsiz,hcint.d32 ,hcintmsk.d32 + ,(hcint.b.datatglerr || hcintmsk.b.datatglerr)? + ( + (hcint.b.datatglerr && hcintmsk.b.datatglerr)?"datatglerr[*/*] ": + ( + (hcint.b.datatglerr)?"datatglerr[*/] ":"datatglerr[/*] " + ) + ) + :"" + ,(hcint.b.frmovrun || hcintmsk.b.frmovrun)? + ( + (hcint.b.frmovrun && hcintmsk.b.frmovrun)?"frmovrun[*/*] ": + ( + (hcint.b.frmovrun)?"frmovrun[*/] ":"frmovrun[/*] " + ) + ) + :"" + ,(hcint.b.bblerr || hcintmsk.b.bblerr)? + ( + (hcint.b.bblerr && hcintmsk.b.bblerr)?"bblerr[*/*] ": + ( + (hcint.b.bblerr)?"bblerr[*/] ":"bblerr[/*] " + ) + ) + :"" + ,(hcint.b.xacterr || hcintmsk.b.xacterr)? + ( + (hcint.b.xacterr && hcintmsk.b.xacterr)?"xacterr[*/*] ": + ( + (hcint.b.xacterr)?"xacterr[*/] ":"xacterr[/*] " + ) + ) + :"" + ,(hcint.b.nyet || hcintmsk.b.nyet)? + ( + (hcint.b.nyet && hcintmsk.b.nyet)?"nyet[*/*] ": + ( + (hcint.b.nyet)?"nyet[*/] ":"nyet[/*] " + ) + ) + :"" + ,(hcint.b.nak || hcintmsk.b.nak)? + ( + (hcint.b.nak && hcintmsk.b.nak)?"nak[*/*] ": + ( + (hcint.b.nak)?"nak[*/] ":"nak[/*] " + ) + ) + :"" + ,(hcint.b.ack || hcintmsk.b.ack)? + ( + (hcint.b.ack && hcintmsk.b.ack)?"ack[*/*] ": + ( + (hcint.b.ack)?"ack[*/] ":"ack[/*] " + ) + ) + :"" + ,(hcint.b.stall || hcintmsk.b.stall)? + ( + (hcint.b.stall && hcintmsk.b.stall)?"stall[*/*] ": + ( + (hcint.b.stall)?"stall[*/] ":"stall[/*] " + ) + ) + :"" + ,(hcint.b.ahberr || hcintmsk.b.ahberr)? + ( + (hcint.b.ahberr && hcintmsk.b.ahberr)?"ahberr[*/*] ": + ( + (hcint.b.ahberr)?"ahberr[*/] ":"ahberr[/*] " + ) + ) + :"" + ,(hcint.b.xfercomp || hcintmsk.b.xfercomp)? + ( + (hcint.b.xfercomp && hcintmsk.b.xfercomp)?"xfercomp[*/*] ": + ( + (hcint.b.xfercomp)?"xfercomp[*/] ":"xfercomp[/*] " + ) + ) + :"" + ); +#endif +} + + +extern void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf); + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_ctrlbulk_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _ifxhc->do_ping = 0; + + if(_ifxhc->halt_status == HC_XFER_NAK) + { + if(_ifxhc->nak_retry_r) + { + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + _ifxhc->nak_retry--; + if(_ifxhc->nak_retry) + { + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + { + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status); + } + } + else + { + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + + if (hcint.b.xfercomp) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + else if (hcint.b.stall) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + // ZLP shortcut + #if 0 + if(hctsiz.b.pktcnt==0) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + #endif + { + // Stall FIFO compensation. + #if 0 + int sz1,sz2; + sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt; + sz2*=_ifxhc->mps; + sz1=_ifxhc->xfer_len - hctsiz.b.xfersize; + sz2-=sz1; + if(sz2) + ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf); + #endif + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + } + return 1; + } + else if (hcint.b.bblerr) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + + // ZLP shortcut + #if 0 + if(hctsiz.b.pktcnt==0) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + #endif + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if (hcint.b.xacterr) + { + // ZLP shortcut + #if 1 + if(hctsiz.b.pktcnt==0) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + #endif + { + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + + /* 20110803 AVM/WK FIX: Reset error count on any handshake */ + if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) { + _urbd->error_count = 1; + } else { + _urbd->error_count++; + } + + if (_urbd->error_count >= 3) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + } + return 1; + } + else if(hcint.b.datatglerr ) + { + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + #if 1 + if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + _ifxhc->wait_for_sof = 1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + #else + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + #endif + return 1; + } + else if(hcint.b.frmovrun ) + { +IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 FRMOVRUN [should be Period only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + else if(hcint.b.nyet ) + { +IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 NYET [should be Out only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_ctrlbulk_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + +#ifdef __DEBUG__ +static int first=0; +#endif + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + +#ifdef __DEBUG__ +if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK + &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack) +{ + showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + first=1; + printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n" + ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3) + ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7) + ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11) + ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15)); + + printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n" + ,_urbd->urb->actual_length + ,_ifxhc->start_pkt_count + ,hctsiz.b.pktcnt + ,_urbd->xfer_len); +} +#endif + + if(_ifxhc->halt_status == HC_XFER_NAK) + { + if(_ifxhc->nak_retry_r) + { + _ifxhc->nak_retry--; + if(_ifxhc->nak_retry) + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + { + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status); + } + } + else + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + + if (hcint.b.xfercomp) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _urbd->error_count =0; + if(_ifxhc->xfer_len==0 && !hcint.b.ack && hcint.b.nak) + { + // Walkaround: When sending ZLP and receive NAK but also issue CMPT intr + // Solution: NoSplit: Resend at next SOF + // Split : Resend at next SOF with SSPLIT + if(hcint.b.nyet && !out_nak_enh) + _ifxhc->do_ping = 1; + else + _ifxhc->do_ping = 0; + _ifxhc->xfer_len = 0; + _ifxhc->xfer_count = 0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + { + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + return 1; + } + else if (hcint.b.stall) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + + // ZLP shortcut + #if 1 + if(hctsiz.b.pktcnt==0) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + #endif + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + } + return 1; + } + else if (hcint.b.xacterr) + { + // ZLP shortcut + #if 1 + if(hctsiz.b.pktcnt==0) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + #endif + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + + if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =1; + enable_hc_int(_hc_regs,ack); + enable_hc_int(_hc_regs,nak); + enable_hc_int(_hc_regs,nyet); + if(!out_nak_enh) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + { + _urbd->error_count ++ ; + if (_urbd->error_count == 3) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + enable_hc_int(_hc_regs,ack); + enable_hc_int(_hc_regs,nak); + enable_hc_int(_hc_regs,nyet); + _ifxhc->wait_for_sof =1; + if(!out_nak_enh) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + } + } + return 1; + } + else if(hcint.b.bblerr ) + { +IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 BABBLE [should be IN only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _ifxhc->do_ping = 0; + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.nak || hcint.b.nyet) + { + if(!out_nak_enh) + { + // ZLP shortcut + #if 1 + if(hctsiz.b.pktcnt==0) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + #endif + { + if(!out_nak_enh) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + if(_ifxhc->xfer_len!=0) + { + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + } + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + } + else if(hcint.b.datatglerr ) + { +IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 DATATGLERR [should be IN only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + return 1; + } + else if(hcint.b.frmovrun ) + { +IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 FRMOVRUN [should be PERIODIC only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_intr_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _ifxhc->do_ping =0; + + if(_ifxhc->halt_status == HC_XFER_NAK) + { + if(_ifxhc->nak_retry_r) + { + _ifxhc->nak_retry--; + if(_ifxhc->nak_retry) + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + { + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status); + } + } + else + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + + if(hcint.b.xfercomp ) + { + _urbd->error_count =0; + //restart INTR immediately + #if 1 + if(hctsiz.b.pktcnt>0) + { + // TODO Re-initialize Channel (in next b_interval - 1 uF/F) + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + #endif + { + _ifxhc->wait_for_sof =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + return 1; + } + else if (hcint.b.stall) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + + // Don't care shortcut + #if 0 + if(hctsiz.b.pktcnt==0) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + #endif + { + // Stall FIFO compensation. + #if 0 + int sz1,sz2; + sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt; + sz2*=_ifxhc->mps; + sz1=_ifxhc->xfer_len - hctsiz.b.xfersize; + sz2-=sz1; + if(sz2) + ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf); + #endif + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + } + return 1; + } + + + else if (hcint.b.bblerr) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + + // Don't care shortcut + #if 0 + if(hctsiz.b.pktcnt==0) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + #endif + { + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + } + return 1; + } + else if (hcint.b.nak || hcint.b.datatglerr || hcint.b.frmovrun) + { + _urbd->error_count =0; + //restart INTR immediately + #if 1 + if(hctsiz.b.pktcnt>0) + { + // TODO Re-initialize Channel (in next b_interval - 1 uF/F) + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + #endif + { + _ifxhc->wait_for_sof =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + return 1; + } + else if (hcint.b.xacterr) + { + // ZLP shortcut + #if 1 + if(hctsiz.b.pktcnt==0) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + #endif + { + /* 20110803 AVM/WK FIX: Reset error count on any handshake */ + if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) { + _urbd->error_count = 1; + } else { + _urbd->error_count++; + } + + if(_urbd->error_count>=3) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + } + return 1; + } + else if(hcint.b.nyet ) + { +IFX_WARN("%s() %d Warning INTR IN SPLIT0 NYET [should be OUT only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_intr_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + if(_ifxhc->halt_status == HC_XFER_NAK) + { + if(_ifxhc->nak_retry_r) + { + _ifxhc->nak_retry--; + if(_ifxhc->nak_retry) + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + { + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status); + } + } + else + { + if(_ifxhc->xfer_len!=0) + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _ifxhc->wait_for_sof = 1; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + + if(hcint.b.xfercomp ) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _urbd->error_count =0; + //restart INTR immediately + #if 0 + if(hctsiz.b.pktcnt>0) + { + // TODO Re-initialize Channel (in next b_interval - 1 uF/F) + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + if(hcint.b.nyet && !out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + #endif + { + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + return 1; + } + else if (hcint.b.stall) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nyet); + disable_hc_int(_hc_regs,nak); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + + // Don't care shortcut + #if 0 + if(hctsiz.b.pktcnt==0) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + #endif + { + if(_ifxhc->xfer_len!=0)// !_ifxhc->is_in + _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps); + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + } + return 1; + } + else if(hcint.b.nak || hcint.b.frmovrun ) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nyet); + disable_hc_int(_hc_regs,nak); + _urbd->error_count =0; + //restart INTR immediately + #if 0 + if(hctsiz.b.pktcnt>0) + { + // TODO Re-initialize Channel (in next b_interval - 1 uF/F) + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + #endif + { + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + return 1; + } + else if(hcint.b.xacterr ) + { + // ZLP shortcut + #if 1 + if(hctsiz.b.pktcnt==0) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + #endif + { + /* 20110803 AVM/WK FIX: Reset error count on any handshake */ + if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) { + _urbd->error_count = 1; + } else { + _urbd->error_count++; + } + + if(_urbd->error_count>=3) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + //_ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + //if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + _ifxhc->wait_for_sof=1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + } + return 1; + } + else if(hcint.b.bblerr ) + { +IFX_WARN("%s() %d Warning INTR OUT SPLIT0 BABBLEERR [should be IN only]\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.datatglerr ) + { +IFX_WARN("%s() %d Warning INTR OUT SPLIT0 DATATGLERR\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_isoc_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #if defined(__EN_ISOC__) + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + if (hcint.b.xfercomp || hcint.b.frmovrun) + { + _urbd->error_count=0; + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _ifxhc->wait_for_sof = 0; + if (hcint.b.xfercomp) + complete_channel(_ifxhcd, _ifxhc, _urbd); + else + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + } + else if (hcint.b.xacterr || hcint.b.bblerr) + { + #ifndef VR9Skip + if(hctsiz.b.pktcnt==0) + { + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + { + int sz1,sz2; + sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt; + sz2*=_ifxhc->mps; + sz1=_ifxhc->xfer_len - hctsiz.b.xfersize; + sz2-=sz1; + if(sz2) + ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf); + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof = 1; + enable_hc_int(_hc_regs,ack); + enable_hc_int(_hc_regs,nak); + enable_hc_int(_hc_regs,nyet); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + } + #endif + } + else if(hcint.b.datatglerr ) + { + warning + } + else if(hcint.b.stall ) + { + warning + } + #else + #endif + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_isoc_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #if defined(__EN_ISOC__) + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + if (hcint.b.xfercomp) + { + _urbd->error_count=0; + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _ifxhc->wait_for_sof = 0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + else if (hcint.b.frmovrun) + { + #ifndef VR9Skip + _urbd->error_count=0; + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + #endif + } + else if(hcint.b.datatglerr ) + { + warning + } + else if(hcint.b.bblerr ) + { + #ifndef VR9Skip + if(hctsiz.b.pktcnt==0) + { + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + else + { + int sz1,sz2; + sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt; + sz2*=_ifxhc->mps; + sz1=_ifxhc->xfer_len - hctsiz.b.xfersize; + sz2-=sz1; + if(sz2) + ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf); + _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + } + else + { + _ifxhc->wait_for_sof = 1; + enable_hc_int(_hc_regs,ack); + enable_hc_int(_hc_regs,nak); + enable_hc_int(_hc_regs,nyet); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + } + #endif + } + else if(hcint.b.xacterr ) + { + if(hctsiz.b.pktcnt==0) + { + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.stall ) + { + warning + } + #else + #endif + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_ctrlbulk_rx_ssplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + + _ifxhc->do_ping =0; + + if (hcint.b.ack) + { + _urbd->error_count=0; + _ifxhc->split=2; + _ifxhc->wait_for_sof = 8; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if (hcint.b.nak) + { + _ifxhc->wait_for_sof = 1; + _urbd->error_count = 0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if (hcint.b.xacterr) + { + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof =1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.bblerr ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.stall ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + return 1; + } + else if(hcint.b.datatglerr ) + { +IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_DATA_TOGGLE_ERR\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + return 1; + } + else if(hcint.b.frmovrun ) + { +IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + else if(hcint.b.nyet ) + { +IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 NYET\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + } + else if(hcint.b.xfercomp ) + { +IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 COMPLETE\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_ctrlbulk_tx_ssplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + +#ifdef __DEBUG__ +static int first=0; +#endif + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + +#ifdef __DEBUG__ + if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK + &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack) + { + showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + first=1; + printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n" + ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3) + ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7) + ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11) + ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15)); + + printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n" + ,_urbd->urb->actual_length + ,_ifxhc->start_pkt_count + ,hctsiz.b.pktcnt + ,_urbd->xfer_len); + } +#endif + + if (hcint.b.ack ) + { + _urbd->error_count=0; + if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP) + _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len; + _ifxhc->split=2; + _ifxhc->wait_for_sof =8; + _ifxhc->data_pid_start =read_data_toggle(_hc_regs); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nyet) + { +IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 NYET\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count=0; + if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP) + _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len; + _ifxhc->split=2; + _ifxhc->wait_for_sof =1; + _ifxhc->data_pid_start =read_data_toggle(_hc_regs); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nak ) + { + _ifxhc->wait_for_sof =1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _urbd->error_count =0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.xacterr ) + { + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof =1; + _ifxhc->do_ping =1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.datatglerr ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + return 1; + } + else if(hcint.b.bblerr ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.stall ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + return 1; + } + else if(hcint.b.frmovrun ) + { +IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + _ifxhc->do_ping =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + else if(hcint.b.xfercomp ) + { + printk(KERN_INFO "%s() %d Warning CTRLBULK OUT SPLIT1 COMPLETE\n",__func__,__LINE__); + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_intr_rx_ssplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + + _ifxhc->do_ping =0; + + if (hcint.b.ack ) + { + /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/ + _ifxhc->nyet_count=0; + + _urbd->error_count=0; + _ifxhc->split=2; + _ifxhc->wait_for_sof = 0; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nak ) + { + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + _urbd->error_count=0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.xacterr ) + { + hcchar_data_t hcchar; + hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar); + _urbd->error_count=hcchar.b.multicnt; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.stall ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + return 1; + } + else if(hcint.b.bblerr ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.frmovrun ) + { + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.datatglerr ) + { +IFX_WARN( "%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + return 1; + } + else if(hcint.b.xfercomp ) + { +IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_intr_tx_ssplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + + if (hcint.b.ack ) + { + /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/ + _ifxhc->nyet_count=0; + + _urbd->error_count=0; + _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len; + _ifxhc->split=2; + _ifxhc->wait_for_sof = 0; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nyet) + { +IFX_WARN("%s() %d Warning INTR OUT SPLIT1 NYET\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count=0; + _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len; + _ifxhc->split=2; + _ifxhc->wait_for_sof = 0; + _ifxhc->data_pid_start = read_data_toggle(_hc_regs); + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nak ) + { + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + _urbd->error_count =0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.frmovrun ) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.xacterr ) + { + hcchar_data_t hcchar; + hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar); + _urbd->error_count=hcchar.b.multicnt; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + enable_hc_int(_hc_regs,ack); + enable_hc_int(_hc_regs,nak); + enable_hc_int(_hc_regs,nyet); + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.datatglerr ) + { +IFX_WARN("%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR); + return 1; + } + else if(hcint.b.bblerr ) + { +IFX_WARN("%s() %d Warning INTR IN SPLIT1 BABBLEERR\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.stall ) + { +IFX_WARN("%s() %d Warning INTR IN SPLIT1 STALL\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + _urbd->error_count =0; + _ifxhc->wait_for_sof =0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + return 1; + } + else if(hcint.b.xfercomp ) + { +IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__); +showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_isoc_rx_ssplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__) + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + if (hcint.b.ack ) + { + Do Complete Split + } + else if(hcint.b.frmovrun ) + { + Rewind Buffer Pointers + Retry Start Split (in next b_interval ¡V 1 uF) + } + else if(hcint.b.datatglerr ) + { + warning + } + else if(hcint.b.bblerr ) + { + warning + } + else if(hcint.b.xacterr ) + { + warning + } + else if(hcint.b.stall ) + { + warning + } + else if(hcint.b.nak ) + { + warning + } + else if(hcint.b.xfercomp ) + { + warning + } + else if(hcint.b.nyet) + { + warning + } + #endif + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_isoc_tx_ssplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__) + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + if (hcint.b.ack ) + { + Do Next Start Split (in next b_interval ¡V 1 uF) + } + else if(hcint.b.frmovrun ) + { + Do Next Transaction in next frame. + } + else if(hcint.b.datatglerr ) + { + warning + } + else if(hcint.b.bblerr ) + { + warning + } + else if(hcint.b.xacterr ) + { + warning + } + else if(hcint.b.stall ) + { + warning + } + else if(hcint.b.nak ) + { + warning + } + else if(hcint.b.xfercomp ) + { + warning + } + else if(hcint.b.nyet) + { + warning + } + #endif + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_ctrlbulk_rx_csplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + + _ifxhc->do_ping = 0; + + if (hcint.b.xfercomp) + { + _urbd->error_count =0; + _ifxhc->wait_for_sof = 0; + _ifxhc->split=1; + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + else if (hcint.b.nak) + { + _urbd->error_count=0; + + _ifxhc->split = 1; + _ifxhc->wait_for_sof = 1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nyet) + { + _urbd->error_count=0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.stall || hcint.b.bblerr ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + if (hcint.b.stall) + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + else if(hcint.b.bblerr ) + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + else if(hcint.b.xacterr ) + { + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->split=1; + _ifxhc->wait_for_sof = 1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.datatglerr ) + { + if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + _ifxhc->split=1; + _ifxhc->wait_for_sof = 1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.frmovrun ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_ctrlbulk_tx_csplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + +#if 1 +static int first=0; +#endif + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + +#if 1 + if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK + &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack) + { + showint( hcint.d32,hcintmsk.d32,hctsiz.d32); + first=1; + printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n" + ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3) + ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7) + ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11) + ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15)); + + printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n" + ,_urbd->urb->actual_length + ,_ifxhc->start_pkt_count + ,hctsiz.b.pktcnt + ,_urbd->xfer_len); + } +#endif + + if(hcint.b.xfercomp ) + { + _urbd->error_count=0; + _ifxhc->split=1; + _ifxhc->do_ping= 0; + #if 0 + if(_ifxhc->xfer_len==0 && !hcint.b.ack && (hcint.b.nak || hcint.b.nyet)) + { + // Walkaround: When sending ZLP and receive NYEY or NAK but also issue CMPT intr + // Solution: NoSplit: Resend at next SOF + // Split : Resend at next SOF with SSPLIT + _ifxhc->xfer_len = 0; + _ifxhc->xfer_count = 0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + else + #endif + { + _ifxhc->wait_for_sof = 0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + } + return 1; + } + else if(hcint.b.nak ) + { + _urbd->error_count=0; + + _ifxhc->split = 1; + _ifxhc->wait_for_sof = 1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nyet) + { + //Retry Complete Split + // Issue Retry instantly on next SOF, without gothrough process_channels + _urbd->error_count=0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 1; + _ifxhc->do_ping = 0; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.stall ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + return 1; + } + else if(hcint.b.xacterr ) + { + _urbd->error_count++; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->split=1; + _ifxhc->wait_for_sof = 1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.datatglerr ) + { + if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + _ifxhc->split=1; + _ifxhc->wait_for_sof = 1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.frmovrun ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + else if(hcint.b.bblerr ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_intr_rx_csplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _ifxhc->do_ping = 0; + + if (hcint.b.xfercomp ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->split=1; + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + else if(hcint.b.nak ) + { + _urbd->error_count=0; + _ifxhc->split = 1; + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nyet) + { + _urbd->error_count=0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 0; + + /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/ + _ifxhc->nyet_count++; + if(_ifxhc->nyet_count > 2) { + _ifxhc->split = 1; + _ifxhc->nyet_count = 0; + _ifxhc->wait_for_sof = 5; + } + + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.frmovrun || hcint.b.bblerr || hcint.b.stall ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + if (hcint.b.stall) + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + else if(hcint.b.bblerr ) + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + else if(hcint.b.frmovrun ) + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + else if(hcint.b.xacterr ) + { + hcchar_data_t hcchar; + hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar); + _urbd->error_count=hcchar.b.multicnt; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->split=1; + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.datatglerr ) + { + if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + _ifxhc->split=1; + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_intr_tx_csplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + + if(hcint.b.xfercomp ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->split=1; + _ifxhc->do_ping = 0; + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + else if(hcint.b.nak ) + { + _urbd->error_count=0; + _ifxhc->split = 1; + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.nyet) + { + _urbd->error_count=0; + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + + /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/ + _ifxhc->nyet_count++; + if(_ifxhc->nyet_count > 2) { + _ifxhc->split = 1; + _ifxhc->nyet_count = 0; + _ifxhc->wait_for_sof = 5; + } + + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.stall || hcint.b.frmovrun) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + if (hcint.b.stall) + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + else if(hcint.b.frmovrun ) + release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN); + return 1; + } + else if(hcint.b.xacterr ) + { + hcchar_data_t hcchar; + hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar); + _urbd->error_count=hcchar.b.multicnt; + if(_urbd->error_count>=3) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR); + } + else + { + _ifxhc->split=1; + _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1; + if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + } + return 1; + } + else if(hcint.b.datatglerr ) + { + if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0) + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1; + else + _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0; + _ifxhc->split=1; + if(!out_nak_enh ) + _ifxhc->do_ping =1; + else + _ifxhc->do_ping =0; + _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length; + _ifxhc->xfer_count = _urbd->urb->actual_length; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.bblerr ) + { + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->do_ping = 0; + release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR); + return 1; + } + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_isoc_rx_csplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__) + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + if(hcint.b.xfercomp ) + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,nyet); + _urbd->error_count=0; + _ifxhc->wait_for_sof = 0; + _ifxhc->split=1; + complete_channel(_ifxhcd, _ifxhc, _urbd); + return 1; + } + else if(hcint.b.nak ) + { + Retry Start Split (in next b_interval ¡V 1 uF) + } + else if(hcint.b.nyet) + { + //Do Next Complete Split + // Issue Retry instantly on next SOF, without gothrough process_channels + _urbd->error_count=0; + //disable_hc_int(_hc_regs,ack); + //disable_hc_int(_hc_regs,nak); + //disable_hc_int(_hc_regs,datatglerr); + _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS; + _ifxhc->wait_for_sof = 1; + ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc); + return 1; + } + else if(hcint.b.frmovrun || hcint.b.stall || hcint.b.bblerr) + { + _urbd->error_count=0; + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nyet); + disable_hc_int(_hc_regs,nak); + _ifxhc->wait_for_sof = 0; + + //if(hctsiz.b.pktcnt==0) + //{ + // complete_channel(_ifxhcd, _ifxhc, _urbd); + // return 1; + //} + //else + // _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize); + if (hcint.b.stall) + release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL); + else if(hcint.b.frmovrun ) + else if(hcint.b.bblerr ) + return 1; + } + else if(hcint.b.xacterr ) + { + Rewind Buffer Pointers + if (HCCHARn.EC = = 3) // ERR response received + { + Record ERR error + Do Next Start Split (in next frame) + } + else + { + De-allocate Channel + } + } + else if(hcint.b.datatglerr ) + { + warning + } + else if(hcint.b.ack ) + { + warning + } + #endif + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +static int32_t chhltd_isoc_tx_csplit(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__) + hcint_data_t hcint; + hcint_data_t hcintmsk; + hctsiz_data_t hctsiz; + int out_nak_enh = 0; + + if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH) + out_nak_enh = 1; + + hcint.d32 = ifxusb_rreg(&_hc_regs->hcint); + hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + warning + #endif + return 0; +} +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +static int32_t handle_hc_chhltd_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: Channel Halted--\n", _ifxhc->hc_num); + + _ifxhc->halting = 0; + _ifxhc->xfer_started = 0; + + if (_ifxhc->halt_status == HC_XFER_URB_DEQUEUE || + _ifxhc->halt_status == HC_XFER_AHB_ERR) { + /* + * Just release the channel. A dequeue can happen on a + * transfer timeout. In the case of an AHB Error, the channel + * was forced to halt because there's no way to gracefully + * recover. + */ + release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status); + return 1; + } + + if (_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL || _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK) + { + if (_ifxhc->split==0) + { + if(_ifxhc->is_in) + return (chhltd_ctrlbulk_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_ctrlbulk_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + else if(_ifxhc->split==1) + { + if(_ifxhc->is_in) + return (chhltd_ctrlbulk_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_ctrlbulk_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + else if(_ifxhc->split==2) + { + if(_ifxhc->is_in) + return (chhltd_ctrlbulk_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_ctrlbulk_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + } + else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR) + { + if (_ifxhc->split==0) + { + if(_ifxhc->is_in) + return (chhltd_intr_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_intr_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + else if(_ifxhc->split==1) + { + if(_ifxhc->is_in) + return (chhltd_intr_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_intr_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + else if(_ifxhc->split==2) + { + if(_ifxhc->is_in) + return (chhltd_intr_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_intr_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + } + else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC) + { + if (_ifxhc->split==0) + { + if(_ifxhc->is_in) + return (chhltd_isoc_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_isoc_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + else if(_ifxhc->split==1) + { + if(_ifxhc->is_in) + return (chhltd_isoc_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_isoc_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + else if(_ifxhc->split==2) + { + if(_ifxhc->is_in) + return (chhltd_isoc_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + else + return (chhltd_isoc_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd)); + } + } + return 0; +} + +/* + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static void hc_other_intr_dump(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + #ifdef __DEBUG__ + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + struct urb *urb = _urbd->urb; + hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar); + hcsplt.d32 = ifxusb_rreg(&_hc_regs->hcsplt); + hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz); + hcdma = ifxusb_rreg(&_hc_regs->hcdma); + + IFX_ERROR("Channel %d\n", _ifxhc->hc_num); + IFX_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + IFX_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + IFX_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe)); + IFX_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), + (usb_pipein(urb->pipe) ? "IN" : "OUT")); + IFX_ERROR(" Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: pipetype = "CTRL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTR"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break; + default: pipetype = "????"; break; + }; pipetype;})); + IFX_ERROR(" Speed: %s\n", + ({char *speed; + switch (urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HS"; break; + case USB_SPEED_FULL: speed = "FS"; break; + case USB_SPEED_LOW: speed = "LS"; break; + default: speed = "????"; break; + }; speed;})); + IFX_ERROR(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + IFX_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length); + IFX_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", + urb->transfer_buffer, (void *)urb->transfer_dma); + IFX_ERROR(" Setup buffer: %p, Setup DMA: %p\n", + urb->setup_packet, (void *)urb->setup_dma); + IFX_ERROR(" Interval: %d\n", urb->interval); + #endif //__DEBUG__ +} + +/* + * Handles a host channel ACK interrupt. This interrupt is enabled when + * errors occur, and during Start Split transactions. + */ +static int32_t handle_hc_ack_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + _urbd->error_count=0; + if(_ifxhc->nak_countdown_r) + { + _ifxhc->nak_retry=_ifxhc->nak_retry_r; + _ifxhc->nak_countdown=_ifxhc->nak_countdown_r; + } + else + disable_hc_int(_hc_regs,nak); + disable_hc_int(_hc_regs,ack); + return 1; +} + +/* + * Handles a host channel ACK interrupt. This interrupt is enabled when + * errors occur, and during Start Split transactions. + */ +static int32_t handle_hc_nak_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + + _urbd->error_count=0; + + if(_ifxhc->nak_countdown_r) + { + _ifxhc->nak_countdown--; + if(!_ifxhc->nak_countdown) + { + _ifxhc->nak_countdown=_ifxhc->nak_countdown_r; + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_NAK); + } + else + enable_hc_int(_hc_regs,ack); + } + else + { + disable_hc_int(_hc_regs,ack); + disable_hc_int(_hc_regs,nak); + } + return 1; +} + +/* + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static int32_t handle_hc_ahberr_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "AHB Error--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + + ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_AHB_ERR); + return 1; +} + +/* + * Datatoggle + */ +static int32_t handle_hc_datatglerr_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "DATATOGGLE Error--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + disable_hc_int(_hc_regs,datatglerr); + return 1; +} + + + +/* + * Interrupts which should not been triggered + */ +static int32_t handle_hc_frmovrun_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "FrameOverRun Error--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + disable_hc_int(_hc_regs,frmovrun); + return 1; +} + +static int32_t handle_hc_bblerr_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "BBL Error--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + disable_hc_int(_hc_regs,bblerr); + return 1; +} + +static int32_t handle_hc_xacterr_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "XACT Error--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + disable_hc_int(_hc_regs,xacterr); + return 1; +} + +static int32_t handle_hc_nyet_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "NYET--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + _urbd->error_count=0; + disable_hc_int(_hc_regs,nyet); + return 1; +} + +static int32_t handle_hc_stall_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "STALL--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + disable_hc_int(_hc_regs,stall); + return 1; +} + +static int32_t handle_hc_xfercomp_intr(ifxhcd_hcd_t *_ifxhcd, + ifxhcd_hc_t *_ifxhc, + ifxusb_hc_regs_t *_hc_regs, + ifxhcd_urbd_t *_urbd) +{ + IFX_ERROR( "--Host Channel %d Interrupt: " + "XFERCOMP--\n", _ifxhc->hc_num); + hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd); + disable_hc_int(_hc_regs,xfercomp); + return 1; +} + + + +/* This interrupt indicates that the specified host channels has a pending + * interrupt. There are multiple conditions that can cause each host channel + * interrupt. This function determines which conditions have occurred for this + * host channel interrupt and handles them appropriately. */ +static int32_t handle_hc_n_intr (ifxhcd_hcd_t *_ifxhcd, uint32_t _num) +{ + uint32_t hcintval,hcintmsk; + hcint_data_t hcint; + ifxhcd_hc_t *ifxhc; + ifxusb_hc_regs_t *hc_regs; + ifxhcd_urbd_t *urbd; + unsigned long flags; + + int retval = 0; + + IFX_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num); + + /*== AVM/BC 20101111 Lock needed ==*/ + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + + ifxhc = &_ifxhcd->ifxhc[_num]; + hc_regs = _ifxhcd->core_if.hc_regs[_num]; + + hcintval = ifxusb_rreg(&hc_regs->hcint); + hcintmsk = ifxusb_rreg(&hc_regs->hcintmsk); + hcint.d32 = hcintval & hcintmsk; + IFX_DEBUGPL(DBG_HCDV, " 0x%08x & 0x%08x = 0x%08x\n", + hcintval, hcintmsk, hcint.d32); + + urbd = list_entry(ifxhc->epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry); + + if (hcint.b.datatglerr) + retval |= handle_hc_datatglerr_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.frmovrun) + retval |= handle_hc_frmovrun_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.bblerr) + retval |= handle_hc_bblerr_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.xacterr) + retval |= handle_hc_xacterr_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.nyet) + retval |= handle_hc_nyet_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.ack) + retval |= handle_hc_ack_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.nak) + retval |= handle_hc_nak_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.stall) + retval |= handle_hc_stall_intr(_ifxhcd, ifxhc, hc_regs, urbd); + if (hcint.b.ahberr) { + clear_hc_int(hc_regs, ahberr); + retval |= handle_hc_ahberr_intr(_ifxhcd, ifxhc, hc_regs, urbd); + } + if (hcint.b.chhltd) { + /* == 20110901 AVM/WK Fix: Flag must not be cleared after restart of channel ==*/ + clear_hc_int(hc_regs, chhltd); + retval |= handle_hc_chhltd_intr(_ifxhcd, ifxhc, hc_regs, urbd); + } + if (hcint.b.xfercomp) + retval |= handle_hc_xfercomp_intr(_ifxhcd, ifxhc, hc_regs, urbd); + + /* == 20110901 AVM/WK Fix: Never clear possibly new intvals ==*/ + //ifxusb_wreg(&hc_regs->hcint,hcintval); + + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + + return retval; +} + + + + + + +static uint8_t update_interval_counter(ifxhcd_epqh_t *_epqh,uint32_t _diff) +{ + if(_diff>=_epqh->period_counter) + { + _epqh->period_do=1; + if(_diff>_epqh->interval) + _epqh->period_counter=1; + else + _epqh->period_counter=_epqh->period_counter+_epqh->interval-_diff; + return 1; + } + _epqh->period_counter=_epqh->period_counter-_diff; + return 0; +} + + + + +/* + * Handles the start-of-frame interrupt in host mode. Non-periodic + * transactions may be queued to the DWC_otg controller for the current + * (micro)frame. Periodic transactions may be queued to the controller for the + * next (micro)frame. + */ +static int32_t handle_sof_intr (ifxhcd_hcd_t *_ifxhcd) +{ + #ifdef __DYN_SOF_INTR__ + uint8_t with_count_down=0; + #endif + uint8_t active_on=0; + uint8_t ready_on=0; + struct list_head *epqh_entry; + ifxhcd_epqh_t *epqh; + hfnum_data_t hfnum; + uint32_t fndiff; + + unsigned long flags; +#ifdef __USE_TIMER_4_SOF__ + uint32_t wait_for_sof = 0x10000; +#endif + + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + + { + int num_channels; + ifxusb_hc_regs_t *hc_regs; + int i; + num_channels = _ifxhcd->core_if.params.host_channels; + +// AVM/WK moved block here due to use of SOF timer + hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum); + fndiff = hfnum.b.frnum; + fndiff+= 0x00004000; + fndiff-= _ifxhcd->lastframe ; + fndiff&= 0x00003FFF; + if(!fndiff) fndiff =1; + + for (i = 0; i < num_channels; i++) + { + if(_ifxhcd->ifxhc[i].wait_for_sof && _ifxhcd->ifxhc[i].xfer_started) + { +#ifdef __USE_TIMER_4_SOF__ + if (_ifxhcd->ifxhc[i].wait_for_sof > fndiff) { + _ifxhcd->ifxhc[i].wait_for_sof -= fndiff; + } else { + _ifxhcd->ifxhc[i].wait_for_sof = 0; + } +#else + _ifxhcd->ifxhc[i].wait_for_sof--; +#endif + if(_ifxhcd->ifxhc[i].wait_for_sof==0) + { + hcint_data_t hcint= { .d32=0 }; + hc_regs = _ifxhcd->core_if.hc_regs[i]; + + hcint.d32 =0xFFFFFFFF; + ifxusb_wreg(&hc_regs->hcint, hcint.d32); + + hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk); + hcint.b.nak =0; + hcint.b.ack =0; + /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/ + hcint.b.nyet=0; + _ifxhcd->ifxhc[i].nak_countdown=_ifxhcd->ifxhc[i].nak_countdown_r; + if(_ifxhcd->ifxhc[i].nak_countdown_r) + hcint.b.nak =1; + ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32); + + /* AVM WK / BC 20100827 + * FIX: Packet was ignored because of wrong Oddframe bit + */ + if (_ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_INTR || _ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_ISOC) + { + hcchar_data_t hcchar; + hcchar.d32 = _ifxhcd->ifxhc[i].hcchar; + hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum); + /* 1 if _next_ frame is odd, 0 if it's even */ + hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; + _ifxhcd->ifxhc[i].hcchar = hcchar.d32; + } + + ifxusb_wreg(&hc_regs->hcchar, _ifxhcd->ifxhc[i].hcchar); + + } + } + else + _ifxhcd->ifxhc[i].wait_for_sof=0; + +#ifdef __USE_TIMER_4_SOF__ + if (_ifxhcd->ifxhc[i].wait_for_sof && (wait_for_sof > _ifxhcd->ifxhc[i].wait_for_sof)) { + wait_for_sof = _ifxhcd->ifxhc[i].wait_for_sof; + } +#endif + } + } + + // ISOC Active + #ifdef __EN_ISOC__ + #error ISOC not supported: missing SOF code + epqh_entry = _ifxhcd->epqh_isoc_active.next; + while (epqh_entry != &_ifxhcd->epqh_isoc_active) + { + epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry); + epqh_entry = epqh_entry->next; + #ifdef __DYN_SOF_INTR__ + with_count_down=1; + #endif + active_on+=update_interval_counter(epqh,fndiff); + } + + // ISOC Ready + epqh_entry = _ifxhcd->epqh_isoc_ready.next; + while (epqh_entry != &_ifxhcd->epqh_isoc_ready) + { + epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry); + epqh_entry = epqh_entry->next; + #ifdef __DYN_SOF_INTR__ + with_count_down=1; + #endif + ready_on+=update_interval_counter(epqh,fndiff); + } + #endif + + // INTR Active + epqh_entry = _ifxhcd->epqh_intr_active.next; + while (epqh_entry != &_ifxhcd->epqh_intr_active) + { + epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry); + epqh_entry = epqh_entry->next; + #ifdef __DYN_SOF_INTR__ + with_count_down=1; + #endif +#ifdef __USE_TIMER_4_SOF__ + if (update_interval_counter(epqh,fndiff)) { + active_on ++; + wait_for_sof = 1; + } else { + if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) { + wait_for_sof = epqh->period_counter; + } + } +#else + active_on+=update_interval_counter(epqh,fndiff); +#endif + } + + // INTR Ready + epqh_entry = _ifxhcd->epqh_intr_ready.next; + while (epqh_entry != &_ifxhcd->epqh_intr_ready) + { + epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry); + epqh_entry = epqh_entry->next; + #ifdef __DYN_SOF_INTR__ + with_count_down=1; + #endif +#ifdef __USE_TIMER_4_SOF__ + if (update_interval_counter(epqh,fndiff)) { + ready_on ++; + wait_for_sof = 1; + } else { + if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) { + wait_for_sof = epqh->period_counter; + } + } +#else + ready_on+=update_interval_counter(epqh,fndiff); +#endif + } + + // Stdby + epqh_entry = _ifxhcd->epqh_stdby.next; + while (epqh_entry != &_ifxhcd->epqh_stdby) + { + epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry); + epqh_entry = epqh_entry->next; + if(epqh->period_counter > 0 ) { +#ifdef __USE_TIMER_4_SOF__ + if (epqh->period_counter > fndiff) { + epqh->period_counter -= fndiff; + } else { + epqh->period_counter = 0; + } +#else + epqh->period_counter --; +#endif + #ifdef __DYN_SOF_INTR__ + with_count_down=1; + #endif + } + if(epqh->period_counter == 0) { + ifxhcd_epqh_idle_periodic(epqh); + } +#ifdef __USE_TIMER_4_SOF__ + else { + if (wait_for_sof > epqh->period_counter) { + wait_for_sof = epqh->period_counter; + } + } +#endif + } + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + + if(ready_on) + select_eps(_ifxhcd); + else if(active_on) + process_channels(_ifxhcd); + + /* Clear interrupt */ + { + gint_data_t gintsts; + gintsts.d32=0; + gintsts.b.sofintr = 1; + ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32); + + #ifdef __DYN_SOF_INTR__ + if(!with_count_down) + ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0); + #endif +#ifdef __USE_TIMER_4_SOF__ + wait_for_sof &= 0xFFFF; // reduce to 16 Bits. + + if(wait_for_sof == 1) { + // enable SOF + gint_data_t gintsts; + gintsts.d32=0; + gintsts.b.sofintr = 1; + ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32); + } else { + // disable SOF + ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0); + if (wait_for_sof > 1) { + // use timer, not SOF IRQ + hprt0_data_t hprt0; + ktime_t ktime; + hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if); + if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED) { + ktime = ktime_set(0, wait_for_sof * 125 * 1000); /*--- wakeup in n*125usec ---*/ + } else { + ktime = ktime_set(0, wait_for_sof * (1000*1000)); /*--- wakeup in n*1000usec ---*/ + } + hrtimer_start(&_ifxhcd->hr_timer, ktime, HRTIMER_MODE_REL); + } + } +#endif + } + _ifxhcd->lastframe=hfnum.b.frnum; + return 1; +} + + + +/* There are multiple conditions that can cause a port interrupt. This function + * determines which interrupt conditions have occurred and handles them + * appropriately. */ +static int32_t handle_port_intr (ifxhcd_hcd_t *_ifxhcd) +{ + int retval = 0; + hprt0_data_t hprt0; + hprt0_data_t hprt0_modify; + + hprt0.d32 = + hprt0_modify.d32 = ifxusb_rreg(_ifxhcd->core_if.hprt0); + + /* Clear appropriate bits in HPRT0 to clear the interrupt bit in + * GINTSTS */ + + hprt0_modify.b.prtena = 0; + hprt0_modify.b.prtconndet = 0; + hprt0_modify.b.prtenchng = 0; + hprt0_modify.b.prtovrcurrchng = 0; + + /* Port Connect Detected + * Set flag and clear if detected */ + if (hprt0.b.prtconndet) { + IFX_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " + "Port Connect Detected--\n", hprt0.d32); + _ifxhcd->flags.b.port_connect_status_change = 1; + _ifxhcd->flags.b.port_connect_status = 1; + hprt0_modify.b.prtconndet = 1; + + /* The Hub driver asserts a reset when it sees port connect + * status change flag */ + retval |= 1; + } + + /* Port Enable Changed + * Clear if detected - Set internal flag if disabled */ + if (hprt0.b.prtenchng) { + + IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Enable Changed--\n", hprt0.d32); + hprt0_modify.b.prtenchng = 1; + if (hprt0.b.prtena == 1) + /* Port has been enabled set the reset change flag */ + _ifxhcd->flags.b.port_reset_change = 1; + else + _ifxhcd->flags.b.port_enable_change = 1; + retval |= 1; + } + + /* Overcurrent Change Interrupt */ + + if (hprt0.b.prtovrcurrchng) { + IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Overcurrent Changed--\n", hprt0.d32); + _ifxhcd->flags.b.port_over_current_change = 1; + hprt0_modify.b.prtovrcurrchng = 1; + retval |= 1; + } + + /* Clear Port Interrupts */ + ifxusb_wreg(_ifxhcd->core_if.hprt0, hprt0_modify.d32); + return retval; +} + +/* + * This interrupt indicates that SUSPEND state has been detected on + * the USB. + * No Functioning in Host Mode + */ +static int32_t handle_usb_suspend_intr(ifxhcd_hcd_t *_ifxhcd) +{ + gint_data_t gintsts; + IFX_DEBUGP("USB SUSPEND RECEIVED!\n"); + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.usbsuspend = 1; + ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/* + * This interrupt indicates that the IFXUSB controller has detected a + * resume or remote wakeup sequence. If the IFXUSB controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume + * signaling. The handler schedules a time to stop resume signaling. + */ +static int32_t handle_wakeup_detected_intr(ifxhcd_hcd_t *_ifxhcd) +{ + gint_data_t gintsts; + hprt0_data_t hprt0 = {.d32=0}; + pcgcctl_data_t pcgcctl = {.d32=0}; + ifxusb_core_if_t *core_if = &_ifxhcd->core_if; + + IFX_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n"); + + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs). + */ + /* Restart the Phy Clock */ + pcgcctl.b.stoppclk = 1; + ifxusb_mreg(core_if->pcgcctl, pcgcctl.d32, 0); + UDELAY(10); + + /* Now wait for 70 ms. */ + hprt0.d32 = ifxusb_read_hprt0( core_if ); + IFX_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32); + MDELAY(70); + hprt0.b.prtres = 0; /* Resume */ + ifxusb_wreg(core_if->hprt0, hprt0.d32); + IFX_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", ifxusb_rreg(core_if->hprt0)); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.wkupintr = 1; + ifxusb_wreg(&core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/* + * This interrupt indicates that a device is initiating the Session + * Request Protocol to request the host to turn on bus power so a new + * session can begin. The handler responds by turning on bus power. If + * the DWC_otg controller is in low power mode, the handler brings the + * controller out of low power mode before turning on bus power. + */ +static int32_t handle_session_req_intr(ifxhcd_hcd_t *_ifxhcd) +{ + /* Clear interrupt */ + gint_data_t gintsts = { .d32 = 0 }; + gintsts.b.sessreqintr = 1; + ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/* + * This interrupt indicates that a device has been disconnected from + * the root port. + */ +static int32_t handle_disconnect_intr(ifxhcd_hcd_t *_ifxhcd) +{ + gint_data_t gintsts; + + ifxhcd_disconnect(_ifxhcd); + + gintsts.d32 = 0; + gintsts.b.disconnect = 1; + ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/* + * This function handles the Connector ID Status Change Interrupt. It + * reads the OTG Interrupt Register (GOTCTL) to determine whether this + * is a Device to Host Mode transition or a Host Mode to Device + * Transition. + * This only occurs when the cable is connected/removed from the PHY + * connector. + */ +static int32_t handle_conn_id_status_change_intr(ifxhcd_hcd_t *_ifxhcd) +{ + gint_data_t gintsts; + + IFX_WARN("ID Status Change Interrupt: currently in %s mode\n", + ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device"); + + gintsts.d32 = 0; + gintsts.b.conidstschng = 1; + ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32); + return 1; +} + +static int32_t handle_otg_intr(ifxhcd_hcd_t *_ifxhcd) +{ + ifxusb_core_global_regs_t *global_regs = _ifxhcd->core_if.core_global_regs; + gotgint_data_t gotgint; + gotgint.d32 = ifxusb_rreg( &global_regs->gotgint); + /* Clear GOTGINT */ + ifxusb_wreg (&global_regs->gotgint, gotgint.d32); + return 1; +} + +/** This function will log a debug message */ +static int32_t handle_mode_mismatch_intr(ifxhcd_hcd_t *_ifxhcd) +{ + gint_data_t gintsts; + + IFX_WARN("Mode Mismatch Interrupt: currently in %s mode\n", + ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device"); + gintsts.d32 = 0; + gintsts.b.modemismatch = 1; + ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/** This function handles interrupts for the HCD. */ +int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd) +{ + int retval = 0; + + ifxusb_core_if_t *core_if = &_ifxhcd->core_if; + /* AVM/BC 20101111 Unnecesary variable removed*/ + //gint_data_t gintsts,gintsts2; + gint_data_t gintsts; + + /* Check if HOST Mode */ + if (ifxusb_is_device_mode(core_if)) + { + IFX_ERROR("%s() CRITICAL! IN DEVICE MODE\n", __func__); + return 0; + } + + gintsts.d32 = ifxusb_read_core_intr(core_if); + + if (!gintsts.d32) + return 0; + + //Common INT + if (gintsts.b.modemismatch) + { + retval |= handle_mode_mismatch_intr(_ifxhcd); + gintsts.b.modemismatch=0; + } + if (gintsts.b.otgintr) + { + retval |= handle_otg_intr(_ifxhcd); + gintsts.b.otgintr=0; + } + if (gintsts.b.conidstschng) + { + retval |= handle_conn_id_status_change_intr(_ifxhcd); + gintsts.b.conidstschng=0; + } + if (gintsts.b.disconnect) + { + retval |= handle_disconnect_intr(_ifxhcd); + gintsts.b.disconnect=0; + } + if (gintsts.b.sessreqintr) + { + retval |= handle_session_req_intr(_ifxhcd); + gintsts.b.sessreqintr=0; + } + if (gintsts.b.wkupintr) + { + retval |= handle_wakeup_detected_intr(_ifxhcd); + gintsts.b.wkupintr=0; + } + if (gintsts.b.usbsuspend) + { + retval |= handle_usb_suspend_intr(_ifxhcd); + gintsts.b.usbsuspend=0; + } + + //Host Int + if (gintsts.b.sofintr) + { + retval |= handle_sof_intr (_ifxhcd); + gintsts.b.sofintr=0; + } + if (gintsts.b.portintr) + { + retval |= handle_port_intr (_ifxhcd); + gintsts.b.portintr=0; + } + if (gintsts.b.hcintr) + { + int i; + haint_data_t haint; + haint.d32 = ifxusb_read_host_all_channels_intr(core_if); + for (i=0; i< core_if->params.host_channels; i++) + if (haint.b2.chint & (1 << i)) + retval |= handle_hc_n_intr (_ifxhcd, i); + gintsts.b.hcintr=0; + } + return retval; +} diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_queue.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_queue.c new file mode 100644 index 0000000000..8f9dd25745 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxhcd_queue.c @@ -0,0 +1,418 @@ +/***************************************************************************** + ** FILE NAME : ifxhcd_queue.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : This file contains the functions to manage Queue Heads and Queue + ** Transfer Descriptors. + *****************************************************************************/ + +/*! + \file ifxhcd_queue.c + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the functions to manage Queue Heads and Queue + Transfer Descriptors. +*/ +#include <linux/version.h> +#include "ifxusb_version.h" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" +#include "ifxhcd.h" + +#ifdef __EPQD_DESTROY_TIMEOUT__ + #define epqh_self_destroy_timeout 5 + static void eqph_destroy_func(unsigned long _ptr) + { + ifxhcd_epqh_t *epqh=(ifxhcd_epqh_t *)_ptr; + if(epqh) + { + ifxhcd_epqh_free (epqh); + } + } +#endif + +#define SCHEDULE_SLOP 10 + +/*! + \brief This function allocates and initializes a EPQH. + + \param _ifxhcd The HCD state structure for the USB Host controller. + \param[in] _urb Holds the information about the device/endpoint that we need + to initialize the EPQH. + + \return Returns pointer to the newly allocated EPQH, or NULL on error. + */ +ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb) +{ + ifxhcd_epqh_t *epqh; + + hprt0_data_t hprt0; + struct usb_host_endpoint *sysep = ifxhcd_urb_to_endpoint(_urb); + + /* Allocate memory */ +// epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_KERNEL); + epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_ATOMIC); + + if(epqh == NULL) + return NULL; + + memset (epqh, 0, sizeof (ifxhcd_epqh_t)); + + epqh->sysep=sysep; + + /* Initialize EPQH */ + switch (usb_pipetype(_urb->pipe)) + { + case PIPE_CONTROL : epqh->ep_type = IFXUSB_EP_TYPE_CTRL; break; + case PIPE_BULK : epqh->ep_type = IFXUSB_EP_TYPE_BULK; break; + case PIPE_ISOCHRONOUS: epqh->ep_type = IFXUSB_EP_TYPE_ISOC; break; + case PIPE_INTERRUPT : epqh->ep_type = IFXUSB_EP_TYPE_INTR; break; + } + + //epqh->data_toggle = IFXUSB_HC_PID_DATA0; + + epqh->mps = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe))); + + hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if); + + INIT_LIST_HEAD(&epqh->urbd_list); + INIT_LIST_HEAD(&epqh->epqh_list_entry); + epqh->hc = NULL; + + epqh->dump_buf = ifxusb_alloc_buf(epqh->mps, 0); + + /* FS/LS Enpoint on HS Hub + * NOT virtual root hub */ + epqh->need_split = 0; + epqh->pkt_count_limit=0; + if(epqh->ep_type == IFXUSB_EP_TYPE_BULK && !(usb_pipein(_urb->pipe)) ) + epqh->pkt_count_limit=4; + if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED && + ((_urb->dev->speed == USB_SPEED_LOW) || + (_urb->dev->speed == USB_SPEED_FULL)) && + (_urb->dev->tt) && (_urb->dev->tt->hub->devnum != 1)) + { + IFX_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", + usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum, + _urb->dev->ttport); + epqh->need_split = 1; + epqh->pkt_count_limit=1; + } + + if (epqh->ep_type == IFXUSB_EP_TYPE_INTR || + epqh->ep_type == IFXUSB_EP_TYPE_ISOC) + { + /* Compute scheduling parameters once and save them. */ + epqh->interval = _urb->interval; + if(epqh->need_split) + epqh->interval *= 8; + } + + epqh->period_counter=0; + epqh->is_active=0; + + #ifdef __EPQD_DESTROY_TIMEOUT__ + /* Start a timer for this transfer. */ + init_timer(&epqh->destroy_timer); + epqh->destroy_timer.function = eqph_destroy_func; + epqh->destroy_timer.data = (unsigned long)(epqh); + #endif + + #ifdef __DEBUG__ + IFX_DEBUGPL(DBG_HCD , "IFXUSB HCD EPQH Initialized\n"); + IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - epqh = %p\n", epqh); + IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Device Address = %d EP %d, %s\n", + _urb->dev->devnum, + usb_pipeendpoint(_urb->pipe), + usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT"); + IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Speed = %s\n", + ({ char *speed; switch (_urb->dev->speed) { + case USB_SPEED_LOW: speed = "low" ; break; + case USB_SPEED_FULL: speed = "full"; break; + case USB_SPEED_HIGH: speed = "high"; break; + default: speed = "?"; break; + }; speed;})); + IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Type = %s\n", + ({ + char *type; switch (epqh->ep_type) + { + case IFXUSB_EP_TYPE_ISOC: type = "isochronous"; break; + case IFXUSB_EP_TYPE_INTR: type = "interrupt" ; break; + case IFXUSB_EP_TYPE_CTRL: type = "control" ; break; + case IFXUSB_EP_TYPE_BULK: type = "bulk" ; break; + default: type = "?"; break; + }; + type; + })); + if (epqh->ep_type == IFXUSB_EP_TYPE_INTR) + IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - interval = %d\n", epqh->interval); + #endif + + return epqh; +} + + + + + + +/*! + \brief Free the EPQH. EPQH should already be removed from a list. + URBD list should already be empty if called from URB Dequeue. + + \param[in] _epqh The EPQH to free. + */ +void ifxhcd_epqh_free (ifxhcd_epqh_t *_epqh) +{ + unsigned long flags; + + if(_epqh->sysep) _epqh->sysep->hcpriv=NULL; + _epqh->sysep=NULL; + + if(!_epqh) + return; + + /* Free each QTD in the QTD list */ + local_irq_save (flags); + if (!list_empty(&_epqh->urbd_list)) + IFX_WARN("%s() invalid epqh state\n",__func__); + + #if defined(__UNALIGNED_BUFFER_ADJ__) + if(_epqh->aligned_buf) + ifxusb_free_buf(_epqh->aligned_buf); + if(_epqh->aligned_setup) + ifxusb_free_buf(_epqh->aligned_setup); + #endif + + if (!list_empty(&_epqh->epqh_list_entry)) + list_del_init(&_epqh->epqh_list_entry); + + #ifdef __EPQD_DESTROY_TIMEOUT__ + del_timer(&_epqh->destroy_timer); + #endif + if(_epqh->dump_buf) + ifxusb_free_buf(_epqh->dump_buf); + _epqh->dump_buf=0; + + + kfree (_epqh); + local_irq_restore (flags); +} + +/*! + \brief This function adds a EPQH to + + \return 0 if successful, negative error code otherwise. + */ +void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh) +{ + unsigned long flags; + local_irq_save(flags); + if (list_empty(&_epqh->epqh_list_entry)) + { + #ifdef __EN_ISOC__ + if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC) + list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready); + else + #endif + if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR) + list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready); + else + list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready); + _epqh->is_active=0; + } + else if(!_epqh->is_active) + { + #ifdef __EN_ISOC__ + if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC) + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready); + else + #endif + if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR) + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready); + else + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready); + } + #ifdef __EPQD_DESTROY_TIMEOUT__ + del_timer(&_epqh->destroy_timer); + #endif + local_irq_restore(flags); +} + +void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh) +{ + unsigned long flags; + local_irq_save(flags); + if (list_empty(&_epqh->epqh_list_entry)) + IFX_WARN("%s() invalid epqh state\n",__func__); + #ifdef __EN_ISOC__ + if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC) + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active); + else + #endif + if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR) + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active); + else + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_active); + _epqh->is_active=1; + #ifdef __EPQD_DESTROY_TIMEOUT__ + del_timer(&_epqh->destroy_timer); + #endif + local_irq_restore(flags); +} + +void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh) +{ + unsigned long flags; + local_irq_save(flags); + + if (list_empty(&_epqh->urbd_list)) + { + if(_epqh->ep_type == IFXUSB_EP_TYPE_ISOC || _epqh->ep_type == IFXUSB_EP_TYPE_INTR) + { + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_stdby); + } + else + { + list_del_init(&_epqh->epqh_list_entry); + #ifdef __EPQD_DESTROY_TIMEOUT__ + del_timer(&_epqh->destroy_timer); + _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout); + add_timer(&_epqh->destroy_timer ); + #endif + } + } + else + { + #ifdef __EN_ISOC__ + if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC) + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready); + else + #endif + if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR) + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready); + else + list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready); + } + _epqh->is_active=0; + local_irq_restore(flags); +} + + +void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh) +{ + unsigned long flags; + if(_epqh->ep_type != IFXUSB_EP_TYPE_ISOC && _epqh->ep_type != IFXUSB_EP_TYPE_INTR) + return; + + local_irq_save(flags); + + if (list_empty(&_epqh->epqh_list_entry)) + IFX_WARN("%s() invalid epqh state\n",__func__); + if (!list_empty(&_epqh->urbd_list)) + IFX_WARN("%s() invalid epqh state(not empty)\n",__func__); + + _epqh->is_active=0; + list_del_init(&_epqh->epqh_list_entry); + #ifdef __EPQD_DESTROY_TIMEOUT__ + del_timer(&_epqh->destroy_timer); + _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout); + add_timer(&_epqh->destroy_timer ); + #endif + + local_irq_restore(flags); +} + + +int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb) +{ + ifxhcd_urbd_t *urbd; + struct usb_host_endpoint *sysep; + ifxhcd_epqh_t *epqh; + unsigned long flags; + /* == AVM/WK 20100714 retval correctly initialized ==*/ + int retval = -ENOMEM; + + /*== AVM/BC 20100630 - Spinlock ==*/ + //local_irq_save(flags); + SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags); + +// urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_KERNEL); + urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_ATOMIC); + if (urbd != NULL) /* Initializes a QTD structure.*/ + { + retval = 0; + memset (urbd, 0, sizeof (ifxhcd_urbd_t)); + + sysep = ifxhcd_urb_to_endpoint(_urb); + epqh = (ifxhcd_epqh_t *)sysep->hcpriv; + if (epqh == NULL) + { + epqh = ifxhcd_epqh_create (_ifxhcd, _urb); + if (epqh == NULL) + { + retval = -ENOSPC; + kfree(urbd); + //local_irq_restore (flags); + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + return retval; + } + sysep->hcpriv = epqh; + } + + INIT_LIST_HEAD(&urbd->urbd_list_entry); + + /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/ + retval = usb_hcd_link_urb_to_ep(ifxhcd_to_syshcd(_ifxhcd), _urb); + + if (unlikely(retval)){ + kfree(urbd); + kfree(epqh); + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + return retval; + } + + list_add_tail(&urbd->urbd_list_entry, &epqh->urbd_list); + urbd->urb = _urb; + _urb->hcpriv = urbd; + + urbd->epqh=epqh; + urbd->is_in=usb_pipein(_urb->pipe) ? 1 : 0;; + + urbd->xfer_len=_urb->transfer_buffer_length; +#define URB_NO_SETUP_DMA_MAP 0 + + if(urbd->xfer_len>0) + { + if(_urb->transfer_flags && URB_NO_TRANSFER_DMA_MAP) + urbd->xfer_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->transfer_dma)); + else + urbd->xfer_buff = (uint8_t *) _urb->transfer_buffer; + } + if(epqh->ep_type == IFXUSB_EP_TYPE_CTRL) + { + if(_urb->transfer_flags && URB_NO_SETUP_DMA_MAP) + urbd->setup_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->setup_dma)); + else + urbd->setup_buff = (uint8_t *) _urb->setup_packet; + } + } + //local_irq_restore (flags); + SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags); + return retval; +} + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif.c new file mode 100644 index 0000000000..10b12927cf --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif.c @@ -0,0 +1,1458 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_cif.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : The Core Interface provides basic services for accessing and + ** managing the IFX USB hardware. These services are used by both the + ** Host Controller Driver and the Peripheral Controller Driver. + *****************************************************************************/ + +/*! + \file ifxusb_cif.c + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the interface to the IFX USB Core. +*/ + +#include <linux/clk.h> +#include <linux/version.h> +#include "ifxusb_version.h" + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + + +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/ioport.h> + +#if defined(__UEIP__) +// #include <asm/ifx/ifx_pmu.h> +// #include <ifx_pmu.h> +#endif + + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" + + +#ifdef __IS_DEVICE__ + #include "ifxpcd.h" +#endif + +#ifdef __IS_HOST__ + #include "ifxhcd.h" +#endif + +#include <linux/mm.h> + +#include <linux/gfp.h> + +#if defined(__UEIP__) +// #include <asm/ifx/ifx_board.h> + //#include <ifx_board.h> +#endif + +//#include <asm/ifx/ifx_gpio.h> +//#include <ifx_gpio.h> +#if defined(__UEIP__) +// #include <asm/ifx/ifx_led.h> + //#include <ifx_led.h> +#endif + + + +#if defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + #ifndef USB_CTRL_PMU_SETUP + #define USB_CTRL_PMU_SETUP(__x) USB0_CTRL_PMU_SETUP(__x) + #endif + #ifndef USB_PHY_PMU_SETUP + #define USB_PHY_PMU_SETUP(__x) USB0_PHY_PMU_SETUP(__x) + #endif + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) +#endif // defined(__UEIP__) + +/*! + \brief This function is called to allocate buffer of specified size. + The allocated buffer is mapped into DMA accessable address. + \param size Size in BYTE to be allocated + \param clear 0: don't do clear after buffer allocated, other: do clear to zero + \return 0/NULL: Fail; uncached pointer of allocated buffer + */ +void *ifxusb_alloc_buf(size_t size, int clear) +{ + uint32_t *cached,*uncached; + uint32_t totalsize,page; + + if(!size) + return 0; + + size=(size+3)&0xFFFFFFFC; + totalsize=size + 12; + page=get_order(totalsize); + + cached = (void *) __get_free_pages(( GFP_ATOMIC | GFP_DMA), page); + + if(!cached) + { + IFX_PRINT("%s Allocation Failed size:%d\n",__func__,size); + return NULL; + } + + uncached = (uint32_t *)(KSEG1ADDR(cached)); + if(clear) + memset(uncached, 0, totalsize); + + *(uncached+0)=totalsize; + *(uncached+1)=page; + *(uncached+2)=(uint32_t)cached; + return (void *)(uncached+3); +} + + +/*! + \brief This function is called to free allocated buffer. + \param vaddr the uncached pointer of the buffer + */ +void ifxusb_free_buf(void *vaddr) +{ + uint32_t totalsize,page; + uint32_t *cached,*uncached; + + if(vaddr != NULL) + { + uncached=vaddr; + uncached-=3; + totalsize=*(uncached+0); + page=*(uncached+1); + cached=(uint32_t *)(*(uncached+2)); + if(totalsize && page==get_order(totalsize) && cached==(uint32_t *)(KSEG0ADDR(uncached))) + { + free_pages((unsigned long)cached, page); + return; + } + // the memory is not allocated by ifxusb_alloc_buf. Allowed but must be careful. + return; + } +} + + + +/*! + \brief This function is called to initialize the IFXUSB CSR data + structures. The register addresses in the device and host + structures are initialized from the base address supplied by the + caller. The calling function must make the OS calls to get the + base address of the IFXUSB controller registers. + + \param _core_if Pointer of core_if structure + \param _irq irq number + \param _reg_base_addr Base address of IFXUSB core registers + \param _fifo_base_addr Fifo base address + \param _fifo_dbg_addr Fifo debug address + \return 0: success; + */ +int ifxusb_core_if_init(ifxusb_core_if_t *_core_if, + int _irq, + uint32_t _reg_base_addr, + uint32_t _fifo_base_addr, + uint32_t _fifo_dbg_addr) +{ + int retval = 0; + uint32_t *reg_base =NULL; + uint32_t *fifo_base =NULL; + uint32_t *fifo_dbg =NULL; + + int i; + + IFX_DEBUGPL(DBG_CILV, "%s(%p,%d,0x%08X,0x%08X,0x%08X)\n", __func__, + _core_if, + _irq, + _reg_base_addr, + _fifo_base_addr, + _fifo_dbg_addr); + + if( _core_if == NULL) + { + IFX_ERROR("%s() invalid _core_if\n", __func__); + retval = -ENOMEM; + goto fail; + } + + //memset(_core_if, 0, sizeof(ifxusb_core_if_t)); + + _core_if->irq=_irq; + + reg_base =ioremap_nocache(_reg_base_addr , IFXUSB_IOMEM_SIZE ); + fifo_base =ioremap_nocache(_fifo_base_addr, IFXUSB_FIFOMEM_SIZE); + fifo_dbg =ioremap_nocache(_fifo_dbg_addr , IFXUSB_FIFODBG_SIZE); + if( reg_base == NULL || fifo_base == NULL || fifo_dbg == NULL) + { + IFX_ERROR("%s() usb ioremap() failed\n", __func__); + retval = -ENOMEM; + goto fail; + } + + _core_if->core_global_regs = (ifxusb_core_global_regs_t *)reg_base; + + /* + * Attempt to ensure this device is really a IFXUSB Controller. + * Read and verify the SNPSID register contents. The value should be + * 0x45F42XXX + */ + { + int32_t snpsid; + snpsid = ifxusb_rreg(&_core_if->core_global_regs->gsnpsid); + if ((snpsid & 0xFFFFF000) != 0x4F542000) + { + IFX_ERROR("%s() snpsid error(0x%08x) failed\n", __func__,snpsid); + retval = -EINVAL; + goto fail; + } + _core_if->snpsid=snpsid; + } + + #ifdef __IS_HOST__ + _core_if->host_global_regs = (ifxusb_host_global_regs_t *) + ((uint32_t)reg_base + IFXUSB_HOST_GLOBAL_REG_OFFSET); + _core_if->hprt0 = (uint32_t*)((uint32_t)reg_base + IFXUSB_HOST_PORT_REGS_OFFSET); + + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + _core_if->hc_regs[i] = (ifxusb_hc_regs_t *) + ((uint32_t)reg_base + IFXUSB_HOST_CHAN_REGS_OFFSET + + (i * IFXUSB_CHAN_REGS_OFFSET)); + IFX_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", + i, &_core_if->hc_regs[i]->hcchar); + } + #endif //__IS_HOST__ + + #ifdef __IS_DEVICE__ + _core_if->dev_global_regs = + (ifxusb_device_global_regs_t *)((uint32_t)reg_base + IFXUSB_DEV_GLOBAL_REG_OFFSET); + + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + _core_if->in_ep_regs[i] = (ifxusb_dev_in_ep_regs_t *) + ((uint32_t)reg_base + IFXUSB_DEV_IN_EP_REG_OFFSET + + (i * IFXUSB_EP_REG_OFFSET)); + _core_if->out_ep_regs[i] = (ifxusb_dev_out_ep_regs_t *) + ((uint32_t)reg_base + IFXUSB_DEV_OUT_EP_REG_OFFSET + + (i * IFXUSB_EP_REG_OFFSET)); + IFX_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p/%p %p/0x%08X/0x%08X\n", + i, &_core_if->in_ep_regs[i]->diepctl, _core_if->in_ep_regs[i], + reg_base,IFXUSB_DEV_IN_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET) + ); + IFX_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p/%p %p/0x%08X/0x%08X\n", + i, &_core_if->out_ep_regs[i]->doepctl, _core_if->out_ep_regs[i], + reg_base,IFXUSB_DEV_OUT_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET) + ); + } + #endif //__IS_DEVICE__ + + /* Setting the FIFO and other Address. */ + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + _core_if->data_fifo[i] = fifo_base + (i * IFXUSB_DATA_FIFO_SIZE); + IFX_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", + i, (unsigned)_core_if->data_fifo[i]); + } + + _core_if->data_fifo_dbg = fifo_dbg; + _core_if->pcgcctl = (uint32_t*)(((uint32_t)reg_base) + IFXUSB_PCGCCTL_OFFSET); + + /* + * Store the contents of the hardware configuration registers here for + * easy access later. + */ + _core_if->hwcfg1.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg1); + _core_if->hwcfg2.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg2); + _core_if->hwcfg3.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg3); + _core_if->hwcfg4.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg4); + + IFX_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",_core_if->hwcfg1.d32); + IFX_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",_core_if->hwcfg2.d32); + IFX_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",_core_if->hwcfg3.d32); + IFX_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",_core_if->hwcfg4.d32); + + + #ifdef __DED_FIFO__ + IFX_PRINT("Waiting for PHY Clock Lock!\n"); + while(!( ifxusb_rreg(&_core_if->core_global_regs->grxfsiz) & (1<<9))) + { + } + IFX_PRINT("PHY Clock Locked!\n"); + //ifxusb_clean_spram(_core_if,128*1024/4); + #endif + + /* Create new workqueue and init works */ +#if 0 + _core_if->wq_usb = create_singlethread_workqueue(_core_if->core_name); + + if(_core_if->wq_usb == 0) + { + IFX_DEBUGPL(DBG_CIL, "Creation of wq_usb failed\n"); + retval = -EINVAL; + goto fail; + } + + #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if); + INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if); + #else + INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change); + INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected); + #endif +#endif + return 0; + +fail: + if( reg_base != NULL) iounmap(reg_base ); + if( fifo_base != NULL) iounmap(fifo_base); + if( fifo_dbg != NULL) iounmap(fifo_dbg ); + return retval; +} + +/*! + \brief This function free the mapped address in the IFXUSB CSR data structures. + \param _core_if Pointer of core_if structure + */ +void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if) +{ + /* Disable all interrupts */ + if( _core_if->core_global_regs != NULL) + { + ifxusb_mreg( &_core_if->core_global_regs->gahbcfg, 1, 0); + ifxusb_wreg( &_core_if->core_global_regs->gintmsk, 0); + } + + if( _core_if->core_global_regs != NULL) iounmap(_core_if->core_global_regs ); + if( _core_if->data_fifo[0] != NULL) iounmap(_core_if->data_fifo[0] ); + if( _core_if->data_fifo_dbg != NULL) iounmap(_core_if->data_fifo_dbg ); + +#if 0 + if (_core_if->wq_usb) + destroy_workqueue(_core_if->wq_usb); +#endif + memset(_core_if, 0, sizeof(ifxusb_core_if_t)); +} + + + + +/*! + \brief This function enbles the controller's Global Interrupt in the AHB Config register. + \param _core_if Pointer of core_if structure + */ +void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if ) +{ + gahbcfg_data_t ahbcfg ={ .d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); +} + +/*! + \brief This function disables the controller's Global Interrupt in the AHB Config register. + \param _core_if Pointer of core_if structure + */ +void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if ) +{ + gahbcfg_data_t ahbcfg ={ .d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); +} + + + + +/*! + \brief Flush Tx and Rx FIFO. + \param _core_if Pointer of core_if structure + */ +void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if ) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset ={ .d32 = 0}; + int count = 0; + + IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__); + greset.b.rxfflsh = 1; + greset.b.txfflsh = 1; + greset.b.txfnum = 0x10; + greset.b.intknqflsh=1; + greset.b.hstfrm=1; + ifxusb_wreg( &global_regs->grstctl, greset.d32 ); + + do + { + greset.d32 = ifxusb_rreg( &global_regs->grstctl); + if (++count > 10000) + { + IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32); + break; + } + } while (greset.b.rxfflsh == 1 || greset.b.txfflsh == 1); + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + +/*! + \brief Flush a Tx FIFO. + \param _core_if Pointer of core_if structure + \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO ) + */ +void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num ) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset ={ .d32 = 0}; + int count = 0; + + IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num); + + greset.b.intknqflsh=1; + greset.b.txfflsh = 1; + greset.b.txfnum = _num; + ifxusb_wreg( &global_regs->grstctl, greset.d32 ); + + do + { + greset.d32 = ifxusb_rreg( &global_regs->grstctl); + if (++count > 10000&&(_num==0 ||_num==0x10)) + { + IFX_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset.d32, + ifxusb_rreg( &global_regs->gnptxsts)); + break; + } + } while (greset.b.txfflsh == 1); + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + + +/*! + \brief Flush Rx FIFO. + \param _core_if Pointer of core_if structure + */ +void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if ) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset ={ .d32 = 0}; + int count = 0; + + IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__); + greset.b.rxfflsh = 1; + ifxusb_wreg( &global_regs->grstctl, greset.d32 ); + + do + { + greset.d32 = ifxusb_rreg( &global_regs->grstctl); + if (++count > 10000) + { + IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32); + break; + } + } while (greset.b.rxfflsh == 1); + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + + +#define SOFT_RESET_DELAY 100 + +/*! + \brief Do a soft reset of the core. Be careful with this because it + resets all the internal state machines of the core. + \param _core_if Pointer of core_if structure + */ +int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + volatile grstctl_t greset ={ .d32 = 0}; + int count = 0; + + IFX_DEBUGPL(DBG_CILV, "%s\n", __func__); + /* Wait for AHB master IDLE state. */ + do + { + UDELAY(10); + greset.d32 = ifxusb_rreg( &global_regs->grstctl); + if (++count > 100000) + { + IFX_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__, + greset.d32, greset.b.ahbidle); + break; + } + } while (greset.b.ahbidle == 0); + + UDELAY(1); + + /* Core Soft Reset */ + count = 0; + greset.b.csftrst = 1; + ifxusb_wreg( &global_regs->grstctl, greset.d32 ); + + #ifdef SOFT_RESET_DELAY + MDELAY(SOFT_RESET_DELAY); + #endif + + do + { + UDELAY(10); + greset.d32 = ifxusb_rreg( &global_regs->grstctl); + if (++count > 100000) + { + IFX_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset.d32); + return -1; + } + } while (greset.b.csftrst == 1); + + #ifdef SOFT_RESET_DELAY + MDELAY(SOFT_RESET_DELAY); + #endif + + + #if defined(__IS_VR9__) + if(_core_if->core_no==0) + { + set_bit (4, VR9_RCU_USBRESET2); + MDELAY(50); + clear_bit (4, VR9_RCU_USBRESET2); + } + else + { + set_bit (5, VR9_RCU_USBRESET2); + MDELAY(50); + clear_bit (5, VR9_RCU_USBRESET2); + } + MDELAY(50); + #endif //defined(__IS_VR9__) + + IFX_PRINT("USB core #%d soft-reset\n",_core_if->core_no); + + return 0; +} + +/*! + \brief Turn on the USB Core Power + \param _core_if Pointer of core_if structure +*/ +void ifxusb_power_on (ifxusb_core_if_t *_core_if) +{ + struct clk *clk0 = clk_get_sys("usb0", NULL); + struct clk *clk1 = clk_get_sys("usb1", NULL); + // set clock gating + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + #if defined(__UEIP__) + + #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__) + set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR); + set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR); + clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + set_bit (0, (volatile unsigned long *)AR9_CGU_IFCCR); + set_bit (1, (volatile unsigned long *)AR9_CGU_IFCCR); + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) +// set_bit (0, (volatile unsigned long *)VR9_CGU_IFCCR); +// set_bit (1, (volatile unsigned long *)VR9_CGU_IFCCR); + #endif //defined(__IS_VR9__) + + MDELAY(50); + + // set power + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + USB_CTRL_PMU_SETUP(IFX_PMU_ENABLE); + //#if defined(__IS_TWINPASS__) + // ifxusb_enable_afe_oc(); + //#endif + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) || defined(__IS_VR9__) + if(_core_if->core_no==0) + clk_enable(clk0); +// USB0_CTRL_PMU_SETUP(IFX_PMU_ENABLE); + else + clk_enable(clk1); +// USB1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); + #endif //defined(__IS_AR9__) || defined(__IS_VR9__) + + if(_core_if->core_global_regs) + { + // PHY configurations. + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) + //ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_VR9__) + } + #else //defined(__UEIP__) + #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__) + set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR); + set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR); + clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + set_bit (0, (volatile unsigned long *)AMAZON_S_CGU_IFCCR); + set_bit (1, (volatile unsigned long *)AMAZON_S_CGU_IFCCR); + #endif //defined(__IS_AR9__) + + MDELAY(50); + + // set power + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + clear_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB + clear_bit (9, (volatile unsigned long *)DANUBE_PMU_PWDCR);//DSL + clear_bit (15, (volatile unsigned long *)DANUBE_PMU_PWDCR);//AHB + #if defined(__IS_TWINPASS__) + ifxusb_enable_afe_oc(); + #endif + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + clear_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR); + clear_bit (9, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR); + clear_bit (15, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + clear_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB + else + clear_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB + clear_bit (9, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//DSL + clear_bit (15, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//AHB + #endif //defined(__IS_AR9__) + + if(_core_if->core_global_regs) + { + // PHY configurations. + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + } + + #endif //defined(__UEIP__) +} + +/*! + \brief Turn off the USB Core Power + \param _core_if Pointer of core_if structure +*/ +void ifxusb_power_off (ifxusb_core_if_t *_core_if) +{ + struct clk *clk0 = clk_get_sys("usb0", NULL); + struct clk *clk1 = clk_get_sys("usb1", NULL); + ifxusb_phy_power_off (_core_if); + + // set power + #if defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + USB_CTRL_PMU_SETUP(IFX_PMU_DISABLE); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) || defined(__IS_VR9__) + if(_core_if->core_no==0) + clk_disable(clk0); + //USB0_CTRL_PMU_SETUP(IFX_PMU_DISABLE); + else + clk_disable(clk1); + //USB1_CTRL_PMU_SETUP(IFX_PMU_DISABLE); + #endif //defined(__IS_AR9__) || defined(__IS_VR9__) + #else //defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + set_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + set_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//USB + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + set_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB + else + set_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB + #endif //defined(__IS_AR9__) + #endif //defined(__UEIP__) +} + +/*! + \brief Turn on the USB PHY Power + \param _core_if Pointer of core_if structure +*/ +void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if) +{ + struct clk *clk0 = clk_get_sys("usb0", NULL); + struct clk *clk1 = clk_get_sys("usb1", NULL); + #if defined(__UEIP__) + if(_core_if->core_global_regs) + { + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9_S__) + if(_core_if->core_no==0) + set_bit (0, VR9_RCU_USB_ANA_CFG1A); + else + set_bit (0, VR9_RCU_USB_ANA_CFG1B); + #endif //defined(__IS_VR9__) + } + + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + USB_PHY_PMU_SETUP(IFX_PMU_ENABLE); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) || defined(__IS_VR9__) + if(_core_if->core_no==0) + clk_enable(clk0); + //USB0_PHY_PMU_SETUP(IFX_PMU_ENABLE); + else + clk_enable(clk1); + //USB1_PHY_PMU_SETUP(IFX_PMU_ENABLE); + #endif //defined(__IS_AR9__) || defined(__IS_VR9__) + + // PHY configurations. + if(_core_if->core_global_regs) + { + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9_S__) + if(_core_if->core_no==0) + set_bit (0, VR9_RCU_USB_ANA_CFG1A); + else + set_bit (0, VR9_RCU_USB_ANA_CFG1B); + #endif //defined(__IS_VR9__) + } + #else //defined(__UEIP__) + // PHY configurations. + if(_core_if->core_global_regs) + { + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + } + + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + clear_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + clear_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + clear_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY + else + clear_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY + #endif //defined(__IS_AR9__) + + // PHY configurations. + if(_core_if->core_global_regs) + { + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + } + #endif //defined(__UEIP__) +} + + +/*! + \brief Turn off the USB PHY Power + \param _core_if Pointer of core_if structure +*/ +void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if) +{ + struct clk *clk0 = clk_get_sys("usb0", NULL); + struct clk *clk1 = clk_get_sys("usb1", NULL); + #if defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + USB_PHY_PMU_SETUP(IFX_PMU_DISABLE); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) || defined(__IS_VR9__) + if(_core_if->core_no==0) + clk_disable(clk0); + //USB0_PHY_PMU_SETUP(IFX_PMU_DISABLE); + else + clk_disable(clk1); + //USB1_PHY_PMU_SETUP(IFX_PMU_DISABLE); + #endif // defined(__IS_AR9__) || defined(__IS_VR9__) + #else //defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + set_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + set_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//PHY + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + set_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY + else + set_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY + #endif //defined(__IS_AR9__) + #endif //defined(__UEIP__) +} + + +/*! + \brief Reset on the USB Core RCU + \param _core_if Pointer of core_if structure + */ +#if defined(__IS_VR9__) + int already_hard_reset=0; +#endif +void ifxusb_hard_reset(ifxusb_core_if_t *_core_if) +{ + #if defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined (__IS_HOST__) + clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + #elif defined (__IS_DEVICE__) + set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + #endif + #endif //defined(__IS_AMAZON_SE__) + + #if defined(__IS_AMAZON_SE__) + #if defined (__IS_HOST__) + clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + #elif defined (__IS_DEVICE__) + set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + #endif + #endif //defined(__IS_AMAZON_SE__) + + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + #if defined (__IS_HOST__) + clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG); + #elif defined (__IS_DEVICE__) + set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG); + #endif + } + else + { + #if defined (__IS_HOST__) + clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG); + #elif defined (__IS_DEVICE__) + set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG); + #endif + } + #endif //defined(__IS_AR9__) + + #if defined(__IS_VR9__) + if(_core_if->core_no==0) + { + #if defined (__IS_HOST__) + clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG); + #elif defined (__IS_DEVICE__) + set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG); + #endif + } + else + { + #if defined (__IS_HOST__) + clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG); + #elif defined (__IS_DEVICE__) + set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG); + #endif + } + #endif //defined(__IS_VR9__) + + + // set the HC's byte-order to big-endian + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG); + clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG); + } + else + { + set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG); + clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG); + } + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) + if(_core_if->core_no==0) + { + set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG); + clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG); + } + else + { + set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG); + clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG); + } + #endif //defined(__IS_VR9__) + + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + set_bit (4, DANUBE_RCU_RESET); + MDELAY(500); + clear_bit (4, DANUBE_RCU_RESET); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + + #if defined(__IS_AMAZON_SE__) + set_bit (4, AMAZON_SE_RCU_RESET); + MDELAY(500); + clear_bit (4, AMAZON_SE_RCU_RESET); + MDELAY(500); + #endif //defined(__IS_AMAZON_SE__) + + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + set_bit (4, AR9_RCU_USBRESET); + MDELAY(500); + clear_bit (4, AR9_RCU_USBRESET); + } + else + { + set_bit (28, AR9_RCU_USBRESET); + MDELAY(500); + clear_bit (28, AR9_RCU_USBRESET); + } + MDELAY(500); + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) + if(!already_hard_reset) + { + set_bit (4, VR9_RCU_USBRESET); + MDELAY(500); + clear_bit (4, VR9_RCU_USBRESET); + MDELAY(500); + already_hard_reset=1; + } + #endif //defined(__IS_VR9__) + + #if defined(__IS_TWINPASS__) + ifxusb_enable_afe_oc(); + #endif + + if(_core_if->core_global_regs) + { + // PHY configurations. + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) + // ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_VR9__) + } + #else //defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined (__IS_HOST__) + clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + #elif defined (__IS_DEVICE__) + set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + #endif + #endif //defined(__IS_AMAZON_SE__) + + #if defined(__IS_AMAZON_SE__) + #if defined (__IS_HOST__) + clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + #elif defined (__IS_DEVICE__) + set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + #endif + #endif //defined(__IS_AMAZON_SE__) + + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + #if defined (__IS_HOST__) + clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG); + #elif defined (__IS_DEVICE__) + set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG); + #endif + } + else + { + #if defined (__IS_HOST__) + clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG); + #elif defined (__IS_DEVICE__) + set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG); + #endif + } + #endif //defined(__IS_AR9__) + + // set the HC's byte-order to big-endian + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG); + clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG); + } + else + { + set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG); + clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG); + } + #endif //defined(__IS_AR9__) + + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + set_bit (4, DANUBE_RCU_RESET); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + set_bit (4, AMAZON_SE_RCU_RESET); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + set_bit (4, AMAZON_S_RCU_USBRESET); + } + else + { + set_bit (28, AMAZON_S_RCU_USBRESET); + } + #endif //defined(__IS_AR9__) + + MDELAY(500); + + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + clear_bit (4, DANUBE_RCU_RESET); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + clear_bit (4, AMAZON_SE_RCU_RESET); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + clear_bit (4, AMAZON_S_RCU_USBRESET); + } + else + { + clear_bit (28, AMAZON_S_RCU_USBRESET); + } + #endif //defined(__IS_AR9__) + + MDELAY(500); + + #if defined(__IS_TWINPASS__) + ifxusb_enable_afe_oc(); + #endif + + if(_core_if->core_global_regs) + { + // PHY configurations. + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014); + #endif //defined(__IS_AR9__) + } + #endif //defined(__UEIP__) +} + +#if defined(__GADGET_LED__) || defined(__HOST_LED__) + #if defined(__UEIP__) + static void *g_usb_led_trigger = NULL; + #endif + + void ifxusb_led_init(ifxusb_core_if_t *_core_if) + { + #if defined(__UEIP__) + if ( !g_usb_led_trigger ) + { + ifx_led_trigger_register("usb_link", &g_usb_led_trigger); + if ( g_usb_led_trigger != NULL ) + { + struct ifx_led_trigger_attrib attrib = {0}; + attrib.delay_on = 250; + attrib.delay_off = 250; + attrib.timeout = 2000; + attrib.def_value = 1; + attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE; + IFX_DEBUGP("Reg USB LED!!\n"); + ifx_led_trigger_set_attrib(g_usb_led_trigger, &attrib); + } + } + #endif //defined(__UEIP__) + } + + void ifxusb_led_free(ifxusb_core_if_t *_core_if) + { + #if defined(__UEIP__) + if ( g_usb_led_trigger ) + { + ifx_led_trigger_deregister(g_usb_led_trigger); + g_usb_led_trigger = NULL; + } + #endif //defined(__UEIP__) + } + + /*! + \brief Turn off the USB 5V VBus Power + \param _core_if Pointer of core_if structure + */ + void ifxusb_led(ifxusb_core_if_t *_core_if) + { + #if defined(__UEIP__) + if(g_usb_led_trigger) + ifx_led_trigger_activate(g_usb_led_trigger); + #else + #endif //defined(__UEIP__) + } +#endif // defined(__GADGET_LED__) || defined(__HOST_LED__) + + + +#if defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__) +/*! + \brief Turn on the OC Int + */ + void ifxusb_oc_int_on() + { + #if defined(__UEIP__) + #else + #if defined(__IS_TWINPASS__) + irq_enable(DANUBE_USB_OC_INT); + #endif + #endif //defined(__UEIP__) + } +/*! + \brief Turn off the OC Int + */ + void ifxusb_oc_int_off() + { + #if defined(__UEIP__) + #else + #if defined(__IS_TWINPASS__) + irq_disable(DANUBE_USB_OC_INT); + #endif + #endif //defined(__UEIP__) + } +#endif //defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__) + +/* internal routines for debugging */ +void ifxusb_dump_msg(const u8 *buf, unsigned int length) +{ +#ifdef __DEBUG__ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + start = 0; + while (length > 0) + { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) + { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + IFX_PRINT( "%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +#endif +} + +/* This functions reads the SPRAM and prints its content */ +void ifxusb_dump_spram(ifxusb_core_if_t *_core_if) +{ +#ifdef __ENABLE_DUMP__ + volatile uint8_t *addr, *start_addr, *end_addr; + uint32_t size; + IFX_PRINT("SPRAM Data:\n"); + start_addr = (void*)_core_if->core_global_regs; + IFX_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr); + + start_addr = (void*)_core_if->data_fifo_dbg; + IFX_PRINT("Starting Address: 0x%8X\n", (uint32_t)start_addr); + + size=_core_if->hwcfg3.b.dfifo_depth; + size<<=2; + size+=0x200; + size&=0x0003FFFC; + + end_addr = (void*)_core_if->data_fifo_dbg; + end_addr += size; + + for(addr = start_addr; addr < end_addr; addr+=16) + { + IFX_PRINT("0x%8X:\t%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n", (uint32_t)addr, + addr[ 0], addr[ 1], addr[ 2], addr[ 3], + addr[ 4], addr[ 5], addr[ 6], addr[ 7], + addr[ 8], addr[ 9], addr[10], addr[11], + addr[12], addr[13], addr[14], addr[15] + ); + } + return; +#endif //__ENABLE_DUMP__ +} + + + + +/* This function reads the core global registers and prints them */ +void ifxusb_dump_registers(ifxusb_core_if_t *_core_if) +{ +#ifdef __ENABLE_DUMP__ + int i; + volatile uint32_t *addr; + #ifdef __IS_DEVICE__ + volatile uint32_t *addri,*addro; + #endif + + IFX_PRINT("Core Global Registers\n"); + addr=&_core_if->core_global_regs->gotgctl; + IFX_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gotgint; + IFX_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gahbcfg; + IFX_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gusbcfg; + IFX_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->grstctl; + IFX_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gintsts; + IFX_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gintmsk; + IFX_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gi2cctl; + IFX_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gpvndctl; + IFX_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->ggpio; + IFX_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->guid; + IFX_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->gsnpsid; + IFX_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->ghwcfg1; + IFX_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->ghwcfg2; + IFX_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->ghwcfg3; + IFX_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->ghwcfg4; + IFX_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + + addr=_core_if->pcgcctl; + IFX_PRINT("PCGCCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + + addr=&_core_if->core_global_regs->grxfsiz; + IFX_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + + #ifdef __IS_HOST__ + addr=&_core_if->core_global_regs->gnptxfsiz; + IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->core_global_regs->hptxfsiz; + IFX_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + #endif //__IS_HOST__ + + #ifdef __IS_DEVICE__ + #ifdef __DED_FIFO__ + addr=&_core_if->core_global_regs->gnptxfsiz; + IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + for (i=0; i<= _core_if->hwcfg4.b.num_in_eps; i++) + { + addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i]; + IFX_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,ifxusb_rreg(addr)); + } + #else + addr=&_core_if->core_global_regs->gnptxfsiz; + IFX_PRINT("TXFSIZ[00] @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + for (i=0; i< _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + { + addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i]; + IFX_PRINT("TXFSIZ[%02d] @0x%08X : 0x%08X\n",i+1,(uint32_t)addr,ifxusb_rreg(addr)); + } + #endif + #endif //__IS_DEVICE__ + + #ifdef __IS_HOST__ + IFX_PRINT("Host Global Registers\n"); + addr=&_core_if->host_global_regs->hcfg; + IFX_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->host_global_regs->hfir; + IFX_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->host_global_regs->hfnum; + IFX_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->host_global_regs->hptxsts; + IFX_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->host_global_regs->haint; + IFX_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->host_global_regs->haintmsk; + IFX_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr= _core_if->hprt0; + IFX_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + IFX_PRINT("Host Channel %d Specific Registers\n", i); + addr=&_core_if->hc_regs[i]->hcchar; + IFX_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->hc_regs[i]->hcsplt; + IFX_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->hc_regs[i]->hcint; + IFX_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->hc_regs[i]->hcintmsk; + IFX_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->hc_regs[i]->hctsiz; + IFX_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->hc_regs[i]->hcdma; + IFX_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + } + #endif //__IS_HOST__ + + #ifdef __IS_DEVICE__ + IFX_PRINT("Device Global Registers\n"); + addr=&_core_if->dev_global_regs->dcfg; + IFX_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->dctl; + IFX_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->dsts; + IFX_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->diepmsk; + IFX_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->doepmsk; + IFX_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->daintmsk; + IFX_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->daint; + IFX_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->dvbusdis; + IFX_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + addr=&_core_if->dev_global_regs->dvbuspulse; + IFX_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr)); + + addr=&_core_if->dev_global_regs->dtknqr1; + IFX_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr)); + if (_core_if->hwcfg2.b.dev_token_q_depth > 6) { + addr=&_core_if->dev_global_regs->dtknqr2; + IFX_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr)); + } + + if (_core_if->hwcfg2.b.dev_token_q_depth > 14) + { + addr=&_core_if->dev_global_regs->dtknqr3_dthrctl; + IFX_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr)); + } + + if (_core_if->hwcfg2.b.dev_token_q_depth > 22) + { + addr=&_core_if->dev_global_regs->dtknqr4_fifoemptymsk; + IFX_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr)); + } + + //for (i=0; i<= MAX_EPS_CHANNELS; i++) + //for (i=0; i<= 10; i++) + for (i=0; i<= 3; i++) + { + IFX_PRINT("Device EP %d Registers\n", i); + addri=&_core_if->in_ep_regs[i]->diepctl;addro=&_core_if->out_ep_regs[i]->doepctl; + IFX_PRINT("DEPCTL I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro)); + addro=&_core_if->out_ep_regs[i]->doepfn; + IFX_PRINT("DEPFN I: O: 0x%08X\n",ifxusb_rreg(addro)); + addri=&_core_if->in_ep_regs[i]->diepint;addro=&_core_if->out_ep_regs[i]->doepint; + IFX_PRINT("DEPINT I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro)); + addri=&_core_if->in_ep_regs[i]->dieptsiz;addro=&_core_if->out_ep_regs[i]->doeptsiz; + IFX_PRINT("DETSIZ I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro)); + addri=&_core_if->in_ep_regs[i]->diepdma;addro=&_core_if->out_ep_regs[i]->doepdma; + IFX_PRINT("DEPDMA I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro)); + addri=&_core_if->in_ep_regs[i]->dtxfsts; + IFX_PRINT("DTXFSTS I: 0x%08X\n",ifxusb_rreg(addri) ); + addri=&_core_if->in_ep_regs[i]->diepdmab;addro=&_core_if->out_ep_regs[i]->doepdmab; + IFX_PRINT("DEPDMAB I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro)); + } + #endif //__IS_DEVICE__ +#endif //__ENABLE_DUMP__ +} + +void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords) +{ + volatile uint32_t *addr1,*addr2, *start_addr, *end_addr; + + if(!dwords) + return; + + start_addr = (uint32_t *)_core_if->data_fifo_dbg; + + end_addr = (uint32_t *)_core_if->data_fifo_dbg; + end_addr += dwords; + + IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X\n", (uint32_t)start_addr,(uint32_t)end_addr); + for(addr1 = start_addr; addr1 < end_addr; addr1+=4) + { + for(addr2 = addr1; addr2 < addr1+4; addr2++) + *addr2=0x00000000; + } + IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X Done\n", (uint32_t)start_addr,(uint32_t)end_addr); + return; +} + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif.h b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif.h new file mode 100644 index 0000000000..191781f623 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif.h @@ -0,0 +1,665 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_cif.h + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : The Core Interface provides basic services for accessing and + ** managing the IFX USB hardware. These services are used by both the + ** Host Controller Driver and the Peripheral Controller Driver. + ** FUNCTIONS : + ** COMPILER : gcc + ** REFERENCE : IFX hardware ref handbook for each plateforms + ** COPYRIGHT : + ** Version Control Section ** + ** $Author$ + ** $Date$ + ** $Revisions$ + ** $Log$ Revision history +*****************************************************************************/ + +/*! + \defgroup IFXUSB_DRIVER_V3 IFX USB SS Project + \brief IFX USB subsystem V3.x + */ + +/*! + \defgroup IFXUSB_CIF Core Interface APIs + \ingroup IFXUSB_DRIVER_V3 + \brief The Core Interface provides basic services for accessing and + managing the IFXUSB hardware. These services are used by both the + Host Controller Driver and the Peripheral Controller Driver. + */ + + +/*! + \file ifxusb_cif.h + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the interface to the IFX USB Core. + */ + +#if !defined(__IFXUSB_CIF_H__) +#define __IFXUSB_CIF_H__ + +#include <linux/workqueue.h> + +#include <linux/version.h> +#include <asm/param.h> + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" + +#ifdef __DEBUG__ + #include "linux/timer.h" +#endif + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define IFXUSB_PARAM_SPEED_HIGH 0 +#define IFXUSB_PARAM_SPEED_FULL 1 + +#define IFXUSB_EP_SPEED_LOW 0 +#define IFXUSB_EP_SPEED_FULL 1 +#define IFXUSB_EP_SPEED_HIGH 2 + +#define IFXUSB_EP_TYPE_CTRL 0 +#define IFXUSB_EP_TYPE_ISOC 1 +#define IFXUSB_EP_TYPE_BULK 2 +#define IFXUSB_EP_TYPE_INTR 3 + +#define IFXUSB_HC_PID_DATA0 0 +#define IFXUSB_HC_PID_DATA2 1 +#define IFXUSB_HC_PID_DATA1 2 +#define IFXUSB_HC_PID_MDATA 3 +#define IFXUSB_HC_PID_SETUP 3 + + +/*! + \addtogroup IFXUSB_CIF + */ +/*@{*/ + +/*! + \struct ifxusb_params + \brief IFXUSB Parameters structure. + This structure is used for both importing from insmod stage and run-time storage. + These parameters define how the IFXUSB controller should be configured. + */ +typedef struct ifxusb_params +{ + int32_t dma_burst_size; /*!< The DMA Burst size (applicable only for Internal DMA + Mode). 0(for single), 1(incr), 4(incr4), 8(incr8) 16(incr16) + */ + /* Translate this to GAHBCFG values */ + int32_t speed; /*!< Specifies the maximum speed of operation in host and device mode. + The actual speed depends on the speed of the attached device and + the value of phy_type. The actual speed depends on the speed of the + attached device. + 0 - High Speed (default) + 1 - Full Speed + */ + + int32_t data_fifo_size; /*!< Total number of dwords in the data FIFO memory. This + memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic + Tx FIFOs. + 32 to 32768 + */ + #ifdef __IS_DEVICE__ + int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in device mode. + 16 to 32768 + */ + + + int32_t tx_fifo_size[MAX_EPS_CHANNELS]; /*!< Number of dwords in each of the Tx FIFOs in device mode. + 4 to 768 + */ + #ifdef __DED_FIFO__ + int32_t thr_ctl; /*!< Threshold control on/off */ + int32_t tx_thr_length; /*!< Threshold length for Tx */ + int32_t rx_thr_length; /*!< Threshold length for Rx*/ + #endif + #else //__IS_HOST__ + int32_t host_channels; /*!< The number of host channel registers to use. + 1 to 16 + */ + + int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in host mode. + 16 to 32768 + */ + + int32_t nperio_tx_fifo_size;/*!< Number of dwords in the non-periodic Tx FIFO in host mode. + 16 to 32768 + */ + + int32_t perio_tx_fifo_size; /*!< Number of dwords in the host periodic Tx FIFO. + 16 to 32768 + */ + #endif //__IS_HOST__ + + int32_t max_transfer_size; /*!< The maximum transfer size supported in bytes. + 2047 to 65,535 + */ + + int32_t max_packet_count; /*!< The maximum number of packets in a transfer. + 15 to 511 (default 511) + */ + int32_t phy_utmi_width; /*!< Specifies the UTMI+ Data Width. + 8 or 16 bits (default 16) + */ + + int32_t turn_around_time_hs; /*!< Specifies the Turn-Around time at HS*/ + int32_t turn_around_time_fs; /*!< Specifies the Turn-Around time at FS*/ + + int32_t timeout_cal_hs; /*!< Specifies the Timeout_Calibration at HS*/ + int32_t timeout_cal_fs; /*!< Specifies the Timeout_Calibration at FS*/ +} ifxusb_params_t; + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +/*! + \struct ifxusb_core_if + \brief The ifx_core_if structure contains information needed to manage + the IFX USB controller acting in either host or device mode. It + represents the programming view of the controller as a whole. + */ +typedef struct ifxusb_core_if +{ + ifxusb_params_t params; /*!< Run-time Parameters */ + + uint8_t core_no; /*!< core number (used as id when multi-core case */ + char *core_name; /*!< core name used for registration and informative purpose*/ + int irq; /*!< irq number this core is hooked */ + + /***************************************************************** + * Structures and pointers to physical register interface. + *****************************************************************/ + /** Core Global registers starting at offset 000h. */ + ifxusb_core_global_regs_t *core_global_regs; /*!< pointer to Core Global Registers, offset at 000h */ + + /** Host-specific registers */ + #ifdef __IS_HOST__ + /** Host Global Registers starting at offset 400h.*/ + ifxusb_host_global_regs_t *host_global_regs; /*!< pointer to Host Global Registers, offset at 400h */ + #define IFXUSB_HOST_GLOBAL_REG_OFFSET 0x400 + /** Host Port 0 Control and Status Register */ + volatile uint32_t *hprt0; /*!< pointer to HPRT0 Registers, offset at 440h */ + #define IFXUSB_HOST_PORT_REGS_OFFSET 0x440 + /** Host Channel Specific Registers at offsets 500h-5FCh. */ + ifxusb_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; /*!< pointer to Host-Channel n Registers, offset at 500h */ + #define IFXUSB_HOST_CHAN_REGS_OFFSET 0x500 + #define IFXUSB_CHAN_REGS_OFFSET 0x20 + #endif + + /** Device-specific registers */ + #ifdef __IS_DEVICE__ + /** Device Global Registers starting at offset 800h */ + ifxusb_device_global_regs_t *dev_global_regs; /*!< pointer to Device Global Registers, offset at 800h */ + #define IFXUSB_DEV_GLOBAL_REG_OFFSET 0x800 + + /** Device Logical IN Endpoint-Specific Registers 900h-AFCh */ + ifxusb_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; /*!< pointer to Device IN-EP Registers, offset at 900h */ + #define IFXUSB_DEV_IN_EP_REG_OFFSET 0x900 + #define IFXUSB_EP_REG_OFFSET 0x20 + /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ + ifxusb_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];/*!< pointer to Device OUT-EP Registers, offset at 900h */ + #define IFXUSB_DEV_OUT_EP_REG_OFFSET 0xB00 + #endif + + /** Power and Clock Gating Control Register */ + volatile uint32_t *pcgcctl; /*!< pointer to Power and Clock Gating Control Registers, offset at E00h */ + #define IFXUSB_PCGCCTL_OFFSET 0xE00 + + /** Push/pop addresses for endpoints or host channels.*/ + uint32_t *data_fifo[MAX_EPS_CHANNELS]; /*!< pointer to FIFO access windows, offset at 1000h */ + #define IFXUSB_DATA_FIFO_OFFSET 0x1000 + #define IFXUSB_DATA_FIFO_SIZE 0x1000 + + uint32_t *data_fifo_dbg; /*!< pointer to FIFO debug windows, offset at 1000h */ + + /** Hardware Configuration -- stored here for convenience.*/ + hwcfg1_data_t hwcfg1; /*!< preserved Hardware Configuration 1 */ + hwcfg2_data_t hwcfg2; /*!< preserved Hardware Configuration 2 */ + hwcfg3_data_t hwcfg3; /*!< preserved Hardware Configuration 3 */ + hwcfg4_data_t hwcfg4; /*!< preserved Hardware Configuration 3 */ + uint32_t snpsid; /*!< preserved SNPSID */ + + /***************************************************************** + * Run-time informations. + *****************************************************************/ + /* Set to 1 if the core PHY interface bits in USBCFG have been initialized. */ + uint8_t phy_init_done; /*!< indicated PHY is initialized. */ + + #ifdef __IS_HOST__ + uint8_t queuing_high_bandwidth; /*!< Host mode, Queueing High Bandwidth. */ + #endif +} ifxusb_core_if_t; + +/*@}*//*IFXUSB_CIF*/ + + +/*! + \fn void *ifxusb_alloc_buf(size_t size, int clear) + \brief This function is called to allocate buffer of specified size. + The allocated buffer is mapped into DMA accessable address. + \param size Size in BYTE to be allocated + \param clear 0: don't do clear after buffer allocated, other: do clear to zero + \return 0/NULL: Fail; uncached pointer of allocated buffer + \ingroup IFXUSB_CIF + */ +extern void *ifxusb_alloc_buf(size_t size, int clear); + +/*! + \fn void ifxusb_free_buf(void *vaddr) + \brief This function is called to free allocated buffer. + \param vaddr the uncached pointer of the buffer + \ingroup IFXUSB_CIF + */ +extern void ifxusb_free_buf(void *vaddr); + +/*! + \fn int ifxusb_core_if_init(ifxusb_core_if_t *_core_if, + int _irq, + uint32_t _reg_base_addr, + uint32_t _fifo_base_addr, + uint32_t _fifo_dbg_addr) + \brief This function is called to initialize the IFXUSB CSR data + structures. The register addresses in the device and host + structures are initialized from the base address supplied by the + caller. The calling function must make the OS calls to get the + base address of the IFXUSB controller registers. + \param _core_if Pointer of core_if structure + \param _irq irq number + \param _reg_base_addr Base address of IFXUSB core registers + \param _fifo_base_addr Fifo base address + \param _fifo_dbg_addr Fifo debug address + \return 0: success; + \ingroup IFXUSB_CIF + */ +extern int ifxusb_core_if_init(ifxusb_core_if_t *_core_if, + int _irq, + uint32_t _reg_base_addr, + uint32_t _fifo_base_addr, + uint32_t _fifo_dbg_addr); + + +/*! + \fn void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if) + \brief This function free the mapped address in the IFXUSB CSR data structures. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ +extern void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if); + +/*! + \fn void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if ) + \brief This function enbles the controller's Global Interrupt in the AHB Config register. + \param _core_if Pointer of core_if structure + */ +extern void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if ); + +/*! + \fn void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if ) + \brief This function disables the controller's Global Interrupt in the AHB Config register. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ +extern void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if ); + +/*! + \fn void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num ) + \brief Flush a Tx FIFO. + \param _core_if Pointer of core_if structure + \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO ) + \ingroup IFXUSB_CIF + */ +extern void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num ); + +/*! + \fn void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if ) + \brief Flush Rx FIFO. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ +extern void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if ); + +/*! + \fn void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if ) + \brief Flush ALL Rx and Tx FIFO. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ +extern void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if ); + + +/*! + \fn int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if) + \brief Do core a soft reset of the core. Be careful with this because it + resets all the internal state machines of the core. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ +extern int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if); + + +/*! + \brief Turn on the USB Core Power + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF +*/ +extern void ifxusb_power_on (ifxusb_core_if_t *_core_if); + +/*! + \fn void ifxusb_power_off (ifxusb_core_if_t *_core_if) + \brief Turn off the USB Core Power + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF +*/ +extern void ifxusb_power_off (ifxusb_core_if_t *_core_if); + +/*! + \fn void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if) + \brief Turn on the USB PHY Power + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF +*/ +extern void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if); + +/*! + \fn void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if) + \brief Turn off the USB PHY Power + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF +*/ +extern void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if); + +/*! + \fn void ifxusb_hard_reset(ifxusb_core_if_t *_core_if) + \brief Reset on the USB Core RCU + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ +extern void ifxusb_hard_reset(ifxusb_core_if_t *_core_if); + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + + +#ifdef __IS_HOST__ + /*! + \fn void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params) + \brief This function initializes the IFXUSB controller registers for Host mode. + This function flushes the Tx and Rx FIFOs and it flushes any entries in the + request queues. + \param _core_if Pointer of core_if structure + \param _params parameters to be set + \ingroup IFXUSB_CIF + */ + extern void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params); + + /*! + \fn void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if) + \brief This function enables the Host mode interrupts. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if) + \brief This function disables the Host mode interrupts. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if); + + #if defined(__IS_TWINPASS__) + extern void ifxusb_enable_afe_oc(void); + #endif + + /*! + \fn void ifxusb_vbus_init(ifxusb_core_if_t *_core_if) + \brief This function init the VBUS control. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_vbus_init(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_vbus_free(ifxusb_core_if_t *_core_if) + \brief This function free the VBUS control. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_vbus_free(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_vbus_on(ifxusb_core_if_t *_core_if) + \brief Turn on the USB 5V VBus Power + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_vbus_on(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_vbus_off(ifxusb_core_if_t *_core_if) + \brief Turn off the USB 5V VBus Power + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_vbus_off(ifxusb_core_if_t *_core_if); + + /*! + \fn int ifxusb_vbus(ifxusb_core_if_t *_core_if) + \brief Read Current VBus status + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern int ifxusb_vbus(ifxusb_core_if_t *_core_if); + + #if defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__) + /*! + \fn void ifxusb_oc_int_on(void) + \brief Turn on the OC interrupt + \ingroup IFXUSB_CIF + */ + extern void ifxusb_oc_int_on(void); + + /*! + \fn void ifxusb_oc_int_off(void) + \brief Turn off the OC interrupt + \ingroup IFXUSB_CIF + */ + extern void ifxusb_oc_int_off(void); + #endif //defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__) +#endif + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + + +#ifdef __IS_DEVICE__ + /*! + \fn void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if) + \brief This function enables the Device mode interrupts. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if); + + /*! + \fn uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if) + \brief Gets the current USB frame number. This is the frame number from the last SOF packet. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in) + \brief Set the EP STALL. + \param _core_if Pointer of core_if structure + \param _epno EP number + \param _is_in 1: is IN transfer + \ingroup IFXUSB_CIF + */ + extern void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in); + + /*! + \fn void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in) + \brief Set the EP STALL. + \param _core_if Pointer of core_if structure + \param _epno EP number + \param _ep_type EP Type + \ingroup IFXUSB_CIF + */ + extern void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in); + + /*! + \fn void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params) + \brief This function initializes the IFXUSB controller registers for Device mode. + This function flushes the Tx and Rx FIFOs and it flushes any entries in the + request queues. + This function validate the imported parameters and store the result in the CIF structure. + After + \param _core_if Pointer of core_if structure + \param _params structure of inported parameters + \ingroup IFXUSB_CIF + */ + extern void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params); +#endif + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#if defined(__GADGET_LED__) || defined(__HOST_LED__) + /*! + \fn void ifxusb_led_init(ifxusb_core_if_t *_core_if) + \brief This function init the LED control. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_led_init(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_led_free(ifxusb_core_if_t *_core_if) + \brief This function free the LED control. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_led_free(ifxusb_core_if_t *_core_if); + + /*! + \fn void ifxusb_led(ifxusb_core_if_t *_core_if) + \brief This function trigger the LED access. + \param _core_if Pointer of core_if structure + \ingroup IFXUSB_CIF + */ + extern void ifxusb_led(ifxusb_core_if_t *_core_if); +#endif + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +/* internal routines for debugging */ +extern void ifxusb_dump_msg(const u8 *buf, unsigned int length); +extern void ifxusb_dump_spram(ifxusb_core_if_t *_core_if); +extern void ifxusb_dump_registers(ifxusb_core_if_t *_core_if); +extern void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords); + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +static inline uint32_t ifxusb_read_core_intr(ifxusb_core_if_t *_core_if) +{ + return (ifxusb_rreg(&_core_if->core_global_regs->gintsts) & + (ifxusb_rreg(&_core_if->core_global_regs->gintmsk) +#ifdef __USE_TIMER_4_SOF__ + | IFXUSB_SOF_INTR_MASK +#endif + )); +} + +static inline uint32_t ifxusb_read_otg_intr (ifxusb_core_if_t *_core_if) +{ + return (ifxusb_rreg (&_core_if->core_global_regs->gotgint)); +} + +static inline uint32_t ifxusb_mode(ifxusb_core_if_t *_core_if) +{ + return (ifxusb_rreg( &_core_if->core_global_regs->gintsts ) & 0x1); +} +static inline uint8_t ifxusb_is_device_mode(ifxusb_core_if_t *_core_if) +{ + return (ifxusb_mode(_core_if) != 1); +} +static inline uint8_t ifxusb_is_host_mode(ifxusb_core_if_t *_core_if) +{ + return (ifxusb_mode(_core_if) == 1); +} + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#ifdef __IS_HOST__ + static inline uint32_t ifxusb_read_hprt0(ifxusb_core_if_t *_core_if) + { + hprt0_data_t hprt0; + hprt0.d32 = ifxusb_rreg(_core_if->hprt0); + hprt0.b.prtena = 0; + hprt0.b.prtconndet = 0; + hprt0.b.prtenchng = 0; + hprt0.b.prtovrcurrchng = 0; + return hprt0.d32; + } + + static inline uint32_t ifxusb_read_host_all_channels_intr (ifxusb_core_if_t *_core_if) + { + return (ifxusb_rreg (&_core_if->host_global_regs->haint)); + } + + static inline uint32_t ifxusb_read_host_channel_intr (ifxusb_core_if_t *_core_if, int hc_num) + { + return (ifxusb_rreg (&_core_if->hc_regs[hc_num]->hcint)); + } +#endif + +#ifdef __IS_DEVICE__ + static inline uint32_t ifxusb_read_dev_all_in_ep_intr(ifxusb_core_if_t *_core_if) + { + uint32_t v; + v = ifxusb_rreg(&_core_if->dev_global_regs->daint) & + ifxusb_rreg(&_core_if->dev_global_regs->daintmsk); + return (v & 0xffff); + } + + static inline uint32_t ifxusb_read_dev_all_out_ep_intr(ifxusb_core_if_t *_core_if) + { + uint32_t v; + v = ifxusb_rreg(&_core_if->dev_global_regs->daint) & + ifxusb_rreg(&_core_if->dev_global_regs->daintmsk); + return ((v & 0xffff0000) >> 16); + } + + static inline uint32_t ifxusb_read_dev_in_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num) + { + uint32_t v; + v = ifxusb_rreg(&_core_if->in_ep_regs[_ep_num]->diepint) & + ifxusb_rreg(&_core_if->dev_global_regs->diepmsk); + return v; + } + + static inline uint32_t ifxusb_read_dev_out_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num) + { + uint32_t v; + v = ifxusb_rreg(&_core_if->out_ep_regs[_ep_num]->doepint) & + ifxusb_rreg(&_core_if->dev_global_regs->doepmsk); + return v; + } + +#endif + +extern void ifxusb_attr_create (void *_dev); + +extern void ifxusb_attr_remove (void *_dev); + +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#endif // !defined(__IFXUSB_CIF_H__) + + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif_d.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif_d.c new file mode 100644 index 0000000000..36ab0e75bf --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif_d.c @@ -0,0 +1,458 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_cif_d.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : The Core Interface provides basic services for accessing and + ** managing the IFX USB hardware. These services are used by the + ** Peripheral Controller Driver only. + *****************************************************************************/ + +/*! + \file ifxusb_cif_d.c + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the interface to the IFX USB Core. +*/ + +#include <linux/version.h> +#include "ifxusb_version.h" + + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +#ifdef __DEBUG__ + #include <linux/jiffies.h> +#endif + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" + +#include "ifxpcd.h" + + + +/*! + \brief Initializes the DevSpd field of the DCFG register depending on the PHY type + and the enumeration speed of the device. + \param _core_if Pointer of core_if structure + */ +void ifxusb_dev_init_spd(ifxusb_core_if_t *_core_if) +{ + uint32_t val; + dcfg_data_t dcfg; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + if (_core_if->params.speed == IFXUSB_PARAM_SPEED_FULL) + /* High speed PHY running at full speed */ + val = 0x1; + else + /* High speed PHY running at high speed and full speed*/ + val = 0x0; + + IFX_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); + dcfg.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dcfg); + dcfg.b.devspd = val; + ifxusb_wreg(&_core_if->dev_global_regs->dcfg, dcfg.d32); +} + + +/*! + \brief This function enables the Device mode interrupts. + \param _core_if Pointer of core_if structure + */ +void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if) +{ + gint_data_t intr_mask ={ .d32 = 0}; + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Clear any pending OTG Interrupts */ + ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF); + + /* Clear any pending interrupts */ + ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the interrupts in the GINTMSK.*/ + intr_mask.b.modemismatch = 1; + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + + intr_mask.b.usbreset = 1; + intr_mask.b.enumdone = 1; + intr_mask.b.inepintr = 1; + intr_mask.b.outepintr = 1; + intr_mask.b.erlysuspend = 1; + #ifndef __DED_FIFO__ +// intr_mask.b.epmismatch = 1; + #endif + + ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32); + IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk)); +} + +/*! + \brief Gets the current USB frame number. This is the frame number from the last SOF packet. + \param _core_if Pointer of core_if structure + */ +uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if) +{ + dsts_data_t dsts; + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + dsts.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dsts); + /* read current frame/microfreme number from DSTS register */ + return dsts.b.soffn; +} + + +/*! + \brief Set the EP STALL. + */ +void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT")); + + depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)): + (&(_core_if->out_ep_regs[_epno]->doepctl)); + depctl.d32 = ifxusb_rreg(depctl_addr); + depctl.b.stall = 1; + + if (_is_in && depctl.b.epena) + depctl.b.epdis = 1; + + ifxusb_wreg(depctl_addr, depctl.d32); + IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr)); + return; +} + +/*! +\brief Clear the EP STALL. + */ +void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT")); + + depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)): + (&(_core_if->out_ep_regs[_epno]->doepctl)); + + depctl.d32 = ifxusb_rreg(depctl_addr); + /* clear the stall bits */ + depctl.b.stall = 0; + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (_ep_type == IFXUSB_EP_TYPE_INTR || _ep_type == IFXUSB_EP_TYPE_BULK) + depctl.b.setd0pid = 1; /* DATA0 */ + + ifxusb_wreg(depctl_addr, depctl.d32); + IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr)); + return; +} + +/*! + \brief This function initializes the IFXUSB controller registers for Device mode. + This function flushes the Tx and Rx FIFOs and it flushes any entries in the + request queues. + \param _core_if Pointer of core_if structure + \param _params parameters to be set + */ +void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + + gusbcfg_data_t usbcfg ={.d32 = 0}; + gahbcfg_data_t ahbcfg ={.d32 = 0}; + dcfg_data_t dcfg ={.d32 = 0}; + grstctl_t resetctl ={.d32 = 0}; + gotgctl_data_t gotgctl ={.d32 = 0}; + + uint32_t dir; + int i; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if); + + /* Copy Params */ + _core_if->params.dma_burst_size = _params->dma_burst_size; + _core_if->params.speed = _params->speed; + if(_params->max_transfer_size < 2048 || _params->max_transfer_size > ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1) ) + _core_if->params.max_transfer_size = ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1); + else + _core_if->params.max_transfer_size = _params->max_transfer_size; + + if(_params->max_packet_count < 16 || _params->max_packet_count > ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1) ) + _core_if->params.max_packet_count= ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); + else + _core_if->params.max_packet_count= _params->max_packet_count; + _core_if->params.phy_utmi_width = _params->phy_utmi_width; + _core_if->params.turn_around_time_hs = _params->turn_around_time_hs; + _core_if->params.turn_around_time_fs = _params->turn_around_time_fs; + _core_if->params.timeout_cal_hs = _params->timeout_cal_hs; + _core_if->params.timeout_cal_fs = _params->timeout_cal_fs; + + #ifdef __DED_FIFO__ + _core_if->params.thr_ctl = _params->thr_ctl; + _core_if->params.tx_thr_length = _params->tx_thr_length; + _core_if->params.rx_thr_length = _params->rx_thr_length; + #endif + + /* Reset the Controller */ + do + { + while(ifxusb_core_soft_reset( _core_if )) + ifxusb_hard_reset(_core_if); + } while (ifxusb_is_host_mode(_core_if)); + + usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg); + #if 0 + #if defined(__DED_FIFO__) + usbcfg.b.ForceDevMode = 1; + usbcfg.b.ForceHstMode = 0; + #endif + #endif + usbcfg.b.term_sel_dl_pulse = 0; + ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32); + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + /* High speed PHY. */ + if (!_core_if->phy_init_done) + { + _core_if->phy_init_done = 1; + /* HS PHY parameters. These parameters are preserved + * during soft reset so only program the first time. Do + * a soft reset immediately after setting phyif. */ + usbcfg.b.ulpi_utmi_sel = 0; //UTMI+ + usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0; + ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32); + /* Reset after setting the PHY parameters */ + ifxusb_core_soft_reset( _core_if ); + } + + /* Program the GAHBCFG Register.*/ + switch (_core_if->params.dma_burst_size) + { + case 0 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE; + break; + case 1 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR; + break; + case 4 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4; + break; + case 8 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8; + break; + case 16: + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16; + break; + } + ahbcfg.b.dmaenable = 1; + ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32); + + /* Program the GUSBCFG register. */ + usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg ); + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32); + + /* Restart the Phy Clock */ + ifxusb_wreg(_core_if->pcgcctl, 0); + + /* Device configuration register */ + ifxusb_dev_init_spd(_core_if); + dcfg.d32 = ifxusb_rreg( &_core_if->dev_global_regs->dcfg); + dcfg.b.perfrint = IFXUSB_DCFG_FRAME_INTERVAL_80; + #if defined(__DED_FIFO__) + #if defined(__DESC_DMA__) + dcfg.b.descdma = 1; + #else + dcfg.b.descdma = 0; + #endif + #endif + + ifxusb_wreg( &_core_if->dev_global_regs->dcfg, dcfg.d32 ); + + /* Configure data FIFO sizes */ + _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth; + _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz); + IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size); + IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size); + + _core_if->params.tx_fifo_size[0]= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16; + + #ifdef __DED_FIFO__ + for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++) + _core_if->params.tx_fifo_size[i] = + ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]) >> 16; + #else + for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + _core_if->params.tx_fifo_size[i+1] = + ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + #endif + + #ifdef __DEBUG__ + #ifdef __DED_FIFO__ + for (i=0; i <= _core_if->hwcfg4.b.num_in_eps; i++) + IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i]); + #else + IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.tx_fifo_size[0]); + for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i+1]); + #endif + #endif + + { + fifosize_data_t txfifosize; + if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size) + _core_if->params.data_fifo_size = _params->data_fifo_size; + + + if(_params->rx_fifo_size >=0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size) + _core_if->params.rx_fifo_size = _params->rx_fifo_size; + if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size) + _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size; + ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size); + + for (i=0; i < MAX_EPS_CHANNELS; i++) + if(_params->tx_fifo_size[i] >=0 && _params->tx_fifo_size[i] < _core_if->params.tx_fifo_size[i]) + _core_if->params.tx_fifo_size[i] = _params->tx_fifo_size[i]; + + txfifosize.b.startaddr = _core_if->params.rx_fifo_size; + #ifdef __DED_FIFO__ + if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size) + _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr; + txfifosize.b.depth=_core_if->params.tx_fifo_size[0]; + ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32); + txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0]; + for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++) + { + if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i] > _core_if->params.data_fifo_size) + _core_if->params.tx_fifo_size[i]= _core_if->params.data_fifo_size - txfifosize.b.startaddr; + txfifosize.b.depth=_core_if->params.tx_fifo_size[i]; + ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i-1], txfifosize.d32); + txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i]; + } + #else + if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size) + _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr; + txfifosize.b.depth=_core_if->params.tx_fifo_size[0]; + ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32); + txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0]; + for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + { + if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i+1] > _core_if->params.data_fifo_size) + _core_if->params.tx_fifo_size[i+1]= _core_if->params.data_fifo_size - txfifosize.b.startaddr; + //txfifosize.b.depth=_core_if->params.tx_fifo_size[i+1]; + ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i], txfifosize.d32); + txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i+1]; + } + #endif + } + + #ifdef __DEBUG__ + { + fifosize_data_t fifosize; + IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size); + + IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X Sz=0x%06X\n", 0,ifxusb_rreg(&global_regs->grxfsiz)); + #ifdef __DED_FIFO__ + fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz); + IFX_DEBUGPL(DBG_CIL, " Tx[00] FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth); + for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++) + { + fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]); + IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth); + } + #else + fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz); + IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth); + for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + { + fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]); + IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth); + } + #endif + } + #endif + + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0); + + /* Flush the FIFOs */ + ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */ + ifxusb_flush_rx_fifo(_core_if); + + /* Flush the Learning Queue. */ + resetctl.b.intknqflsh = 1; + ifxusb_wreg( &global_regs->grstctl, resetctl.d32); + + /* Clear all pending Device Interrupts */ + ifxusb_wreg( &_core_if->dev_global_regs->diepmsk , 0 ); + ifxusb_wreg( &_core_if->dev_global_regs->doepmsk , 0 ); + ifxusb_wreg( &_core_if->dev_global_regs->daint , 0xFFFFFFFF ); + ifxusb_wreg( &_core_if->dev_global_regs->daintmsk, 0 ); + + dir=_core_if->hwcfg1.d32; + for (i=0; i <= _core_if->hwcfg2.b.num_dev_ep ; i++,dir>>=2) + { + depctl_data_t depctl; + if((dir&0x03)==0 || (dir&0x03) ==1) + { + depctl.d32 = ifxusb_rreg(&_core_if->in_ep_regs[i]->diepctl); + if (depctl.b.epena) + { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } + else + depctl.d32 = 0; + ifxusb_wreg( &_core_if->in_ep_regs[i]->diepctl, depctl.d32); + #ifndef __DESC_DMA__ + ifxusb_wreg( &_core_if->in_ep_regs[i]->dieptsiz, 0); + #endif + ifxusb_wreg( &_core_if->in_ep_regs[i]->diepdma, 0); + ifxusb_wreg( &_core_if->in_ep_regs[i]->diepint, 0xFF); + } + + if((dir&0x03)==0 || (dir&0x03) ==2) + { + depctl.d32 = ifxusb_rreg(&_core_if->out_ep_regs[i]->doepctl); + if (depctl.b.epena) + { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } + else + depctl.d32 = 0; + ifxusb_wreg( &_core_if->out_ep_regs[i]->doepctl, depctl.d32); + #ifndef __DESC_DMA__ + ifxusb_wreg( &_core_if->out_ep_regs[i]->doeptsiz, 0); + #endif + ifxusb_wreg( &_core_if->out_ep_regs[i]->doepdma, 0); + ifxusb_wreg( &_core_if->out_ep_regs[i]->doepint, 0xFF); + } + } +} + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif_h.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif_h.c new file mode 100644 index 0000000000..0f47ecd1ab --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_cif_h.c @@ -0,0 +1,846 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_cif_h.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : The Core Interface provides basic services for accessing and + ** managing the IFX USB hardware. These services are used by the + ** Host Controller Driver only. + *****************************************************************************/ + +/*! + \file ifxusb_cif_h.c + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the interface to the IFX USB Core. +*/ +#include <linux/version.h> +#include "ifxusb_version.h" + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +#ifdef __DEBUG__ + #include <linux/jiffies.h> +#endif +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#if defined(__UEIP__) +// #include <asm/ifx/ifx_board.h> +#endif + +//#include <asm/ifx/ifx_gpio.h> +#if defined(__UEIP__) +// #include <asm/ifx/ifx_led.h> +#endif + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" + +#include "ifxhcd.h" + +#if !defined(__UEIP__) + #undef __USING_LED_AS_GPIO__ +#endif + + +/*! + \brief This function enables the Host mode interrupts. + \param _core_if Pointer of core_if structure + */ +void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if) +{ + gint_data_t intr_mask ={ .d32 = 0}; + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + + IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Clear any pending OTG Interrupts */ + ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF); + + /* Clear any pending interrupts */ + ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the interrupts in the GINTMSK.*/ + + /* Common interrupts */ + intr_mask.b.modemismatch = 1; + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + + /* Host interrupts */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + + ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32); + IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk)); +} + +/*! + \brief This function disables the Host mode interrupts. + \param _core_if Pointer of core_if structure + */ +void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + + IFX_DEBUGPL(DBG_CILV, "%s()\n", __func__); + + #if 1 + ifxusb_wreg( &global_regs->gintmsk, 0); + #else + /* Common interrupts */ + { + gint_data_t intr_mask ={.d32 = 0}; + intr_mask.b.modemismatch = 1; + intr_mask.b.rxstsqlvl = 1; + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + + /* Host interrupts */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + intr_mask.b.ptxfempty = 1; + intr_mask.b.nptxfempty = 1; + ifxusb_mreg(&global_regs->gintmsk, intr_mask.d32, 0); + } + #endif +} + +/*! + \brief This function initializes the IFXUSB controller registers for Host mode. + This function flushes the Tx and Rx FIFOs and it flushes any entries in the + request queues. + \param _core_if Pointer of core_if structure + \param _params parameters to be set + */ +void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params) +{ + ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs; + + gusbcfg_data_t usbcfg ={.d32 = 0}; + gahbcfg_data_t ahbcfg ={.d32 = 0}; + gotgctl_data_t gotgctl ={.d32 = 0}; + + int i; + + IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if); + + /* Copy Params */ + + _core_if->params.dma_burst_size = _params->dma_burst_size; + _core_if->params.speed = _params->speed; + _core_if->params.max_transfer_size = _params->max_transfer_size; + _core_if->params.max_packet_count = _params->max_packet_count; + _core_if->params.phy_utmi_width = _params->phy_utmi_width; + _core_if->params.turn_around_time_hs = _params->turn_around_time_hs; + _core_if->params.turn_around_time_fs = _params->turn_around_time_fs; + _core_if->params.timeout_cal_hs = _params->timeout_cal_hs; + _core_if->params.timeout_cal_fs = _params->timeout_cal_fs; + + /* Reset the Controller */ + do + { + while(ifxusb_core_soft_reset( _core_if )) + ifxusb_hard_reset(_core_if); + } while (ifxusb_is_device_mode(_core_if)); + + usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg); +// usbcfg.b.ulpi_ext_vbus_drv = 1; + usbcfg.b.term_sel_dl_pulse = 0; + ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32); + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + /* High speed PHY. */ + if (!_core_if->phy_init_done) + { + _core_if->phy_init_done = 1; + /* HS PHY parameters. These parameters are preserved + * during soft reset so only program the first time. Do + * a soft reset immediately after setting phyif. */ + usbcfg.b.ulpi_utmi_sel = 0; //UTMI+ + usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0; + ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32); + /* Reset after setting the PHY parameters */ + ifxusb_core_soft_reset( _core_if ); + } + + usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg); +// usbcfg.b.ulpi_fsls = 0; +// usbcfg.b.ulpi_clk_sus_m = 0; + ifxusb_wreg(&global_regs->gusbcfg, usbcfg.d32); + + /* Program the GAHBCFG Register.*/ + switch (_core_if->params.dma_burst_size) + { + case 0 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE; + break; + case 1 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR; + break; + case 4 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4; + break; + case 8 : + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8; + break; + case 16: + ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16; + break; + } + ahbcfg.b.dmaenable = 1; + ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32); + + /* Program the GUSBCFG register. */ + usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg ); + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32); + + /* Restart the Phy Clock */ + ifxusb_wreg(_core_if->pcgcctl, 0); + + /* Initialize Host Configuration Register */ + { + hcfg_data_t hcfg; + hcfg.d32 = ifxusb_rreg(&_core_if->host_global_regs->hcfg); + hcfg.b.fslspclksel = IFXUSB_HCFG_30_60_MHZ; + if (_params->speed == IFXUSB_PARAM_SPEED_FULL) + hcfg.b.fslssupp = 1; + ifxusb_wreg(&_core_if->host_global_regs->hcfg, hcfg.d32); + } + + _core_if->params.host_channels=(_core_if->hwcfg2.b.num_host_chan + 1); + + if(_params->host_channels>0 && _params->host_channels < _core_if->params.host_channels) + _core_if->params.host_channels = _params->host_channels; + + /* Configure data FIFO sizes */ + _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth; + _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz); + _core_if->params.nperio_tx_fifo_size= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16; + _core_if->params.perio_tx_fifo_size = ifxusb_rreg(&global_regs->hptxfsiz) >> 16; + IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size); + IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size); + IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.nperio_tx_fifo_size); + IFX_DEBUGPL(DBG_CIL, " PTx FIFO Size=0x%06X\n", _core_if->params.perio_tx_fifo_size); + + { + fifosize_data_t txfifosize; + if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size) + _core_if->params.data_fifo_size = _params->data_fifo_size; + + if( _params->rx_fifo_size >= 0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size) + _core_if->params.rx_fifo_size = _params->rx_fifo_size; + if( _params->nperio_tx_fifo_size >=0 && _params->nperio_tx_fifo_size < _core_if->params.nperio_tx_fifo_size) + _core_if->params.nperio_tx_fifo_size = _params->nperio_tx_fifo_size; + if( _params->perio_tx_fifo_size >=0 && _params->perio_tx_fifo_size < _core_if->params.perio_tx_fifo_size) + _core_if->params.perio_tx_fifo_size = _params->perio_tx_fifo_size; + + if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size) + _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size; + ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size); + txfifosize.b.startaddr = _core_if->params.rx_fifo_size; + + if(txfifosize.b.startaddr + _core_if->params.nperio_tx_fifo_size > _core_if->params.data_fifo_size) + _core_if->params.nperio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr; + txfifosize.b.depth=_core_if->params.nperio_tx_fifo_size; + ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32); + txfifosize.b.startaddr += _core_if->params.nperio_tx_fifo_size; + + if(txfifosize.b.startaddr + _core_if->params.perio_tx_fifo_size > _core_if->params.data_fifo_size) + _core_if->params.perio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr; + txfifosize.b.depth=_core_if->params.perio_tx_fifo_size; + ifxusb_wreg( &global_regs->hptxfsiz, txfifosize.d32); + txfifosize.b.startaddr += _core_if->params.perio_tx_fifo_size; + } + + #ifdef __DEBUG__ + { + fifosize_data_t fifosize; + IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size); + + fifosize.d32=ifxusb_rreg(&global_regs->grxfsiz); + IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth); + fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz); + IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth); + fifosize.d32=ifxusb_rreg(&global_regs->hptxfsiz); + IFX_DEBUGPL(DBG_CIL, " PTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth); + } + #endif + + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0); + + /* Flush the FIFOs */ + ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */ + ifxusb_flush_rx_fifo(_core_if); + + for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++) + { + hcchar_data_t hcchar; + hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar); + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32); + } + /* Halt all channels to put them into a known state. */ + for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++) + { + hcchar_data_t hcchar; + int count = 0; + + hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32); + + IFX_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i); + do{ + hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar); + if (++count > 1000) + { + IFX_ERROR("%s: Unable to clear halt on channel %d\n", __func__, i); + break; + } + } while (hcchar.b.chen); + } +} + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#if defined(__UEIP__) + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + int ifxusb_vbus_status =-1; + #endif + + #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + int ifxusb_vbus1_status =-1; + #endif + + #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + int ifxusb_vbus2_status =-1; + #endif + + #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + static void *g_usb_vbus_trigger = NULL; + #endif + #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + static void *g_usb_vbus1_trigger = NULL; + #endif + #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + static void *g_usb_vbus2_trigger = NULL; + #endif + + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + int ifxusb_vbus_gpio_inited=0; + #endif + +#else //defined(__UEIP__) + int ifxusb_vbus_gpio_inited=0; +#endif + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +void ifxusb_vbus_init(ifxusb_core_if_t *_core_if) +{ + #if defined(__UEIP__) + #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + if ( !g_usb_vbus_trigger ) + { + ifx_led_trigger_register("USB_VBUS", &g_usb_vbus_trigger); + if ( g_usb_vbus_trigger != NULL ) + { + struct ifx_led_trigger_attrib attrib = {0}; + attrib.delay_on = 0; + attrib.delay_off = 0; + attrib.timeout = 0; + attrib.def_value = 0; + attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE; + IFX_DEBUGP("Reg USB power!!\n"); + ifx_led_trigger_set_attrib(g_usb_vbus_trigger, &attrib); + ifxusb_vbus_status =0; + } + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + if(_core_if->core_no==0 && !g_usb_vbus1_trigger ) + { + ifx_led_trigger_register("USB_VBUS1", &g_usb_vbus1_trigger); + if ( g_usb_vbus1_trigger != NULL ) + { + struct ifx_led_trigger_attrib attrib = {0}; + attrib.delay_on = 0; + attrib.delay_off = 0; + attrib.timeout = 0; + attrib.def_value = 0; + attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE; + IFX_DEBUGP("Reg USB1 power!!\n"); + ifx_led_trigger_set_attrib(g_usb_vbus1_trigger, &attrib); + ifxusb_vbus1_status =0; + } + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + if(_core_if->core_no==1 && !g_usb_vbus2_trigger ) + { + ifx_led_trigger_register("USB_VBUS2", &g_usb_vbus2_trigger); + if ( g_usb_vbus2_trigger != NULL ) + { + struct ifx_led_trigger_attrib attrib = {0}; + attrib.delay_on = 0; + attrib.delay_off = 0; + attrib.timeout = 0; + attrib.def_value = 0; + attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE; + IFX_DEBUGP("Reg USB2 power!!\n"); + ifx_led_trigger_set_attrib(g_usb_vbus2_trigger, &attrib); + ifxusb_vbus2_status =0; + } + } + #endif + + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + /* == 20100712 AVM/WK use gpio_inited as bitmask == */ + if(ifxusb_vbus_gpio_inited == 0) + { + if(!ifx_gpio_register(IFX_GPIO_MODULE_USB)) + { + IFX_DEBUGP("Register USB VBus through GPIO OK!!\n"); + #ifdef IFX_GPIO_USB_VBUS + ifxusb_vbus_status =0; + #endif //IFX_GPIO_USB_VBUS + #ifdef IFX_GPIO_USB_VBUS1 + ifxusb_vbus1_status=0; + #endif //IFX_GPIO_USB_VBUS1 + #ifdef IFX_GPIO_USB_VBUS2 + ifxusb_vbus2_status=0; + #endif //IFX_GPIO_USB_VBUS2 + ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no); + } + else + IFX_PRINT("Register USB VBus Failed!!\n"); + } else { + ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no); + } + #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + #endif //defined(__UEIP__) +} + +void ifxusb_vbus_free(ifxusb_core_if_t *_core_if) +{ + #if defined(__UEIP__) + #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + if ( g_usb_vbus_trigger ) + { + ifx_led_trigger_deregister(g_usb_vbus_trigger); + g_usb_vbus_trigger = NULL; + ifxusb_vbus_status =-1; + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + if(_core_if->core_no==0 && g_usb_vbus1_trigger ) + { + ifx_led_trigger_deregister(g_usb_vbus1_trigger); + g_usb_vbus1_trigger = NULL; + ifxusb_vbus1_status =-1; + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + if(_core_if->core_no==1 && g_usb_vbus2_trigger ) + { + ifx_led_trigger_deregister(g_usb_vbus2_trigger); + g_usb_vbus2_trigger = NULL; + ifxusb_vbus2_status =-1; + } + #endif + + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + /* == 20100712 AVM/WK use gpio_inited as bitmask == */ + if((ifxusb_vbus_gpio_inited & (1<<_core_if->core_no)) == ifxusb_vbus_gpio_inited) + { + ifx_gpio_deregister(IFX_GPIO_MODULE_USB); + #ifdef IFX_GPIO_USB_VBUS + ifxusb_vbus_status =-1; + #endif //IFX_GPIO_USB_VBUS + #ifdef IFX_GPIO_USB_VBUS1 + ifxusb_vbus1_status=-1; + #endif //IFX_GPIO_USB_VBUS1 + #ifdef IFX_GPIO_USB_VBUS2 + ifxusb_vbus2_status=-1; + #endif //IFX_GPIO_USB_VBUS2 + } + ifxusb_vbus_gpio_inited &= ~(1<<_core_if->core_no); + #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + #endif //defined(__UEIP__) +} + + +/*! + \brief Turn on the USB 5V VBus Power + \param _core_if Pointer of core_if structure + */ +void ifxusb_vbus_on(ifxusb_core_if_t *_core_if) +{ + IFX_DEBUGP("SENDING VBus POWER UP\n"); + #if defined(__UEIP__) + #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + if ( g_usb_vbus_trigger && ifxusb_vbus_status==0) + { + ifx_led_trigger_activate(g_usb_vbus_trigger); + IFX_DEBUGP("Enable USB power!!\n"); + ifxusb_vbus_status=1; + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==0) + { + ifx_led_trigger_activate(g_usb_vbus1_trigger); + IFX_DEBUGP("Enable USB1 power!!\n"); + ifxusb_vbus1_status=1; + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==0) + { + ifx_led_trigger_activate(g_usb_vbus2_trigger); + IFX_DEBUGP("Enable USB2 power!!\n"); + ifxusb_vbus2_status=1; + } + #endif + + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + if(ifxusb_vbus_gpio_inited) + { + #if defined(IFX_GPIO_USB_VBUS) + if(ifxusb_vbus_status==0) + { + ifx_gpio_output_set(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB); + ifxusb_vbus_status=1; + } + #endif + #if defined(IFX_GPIO_USB_VBUS1) + if(_core_if->core_no==0 && ifxusb_vbus1_status==0) + { + ifx_gpio_output_set(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB); + ifxusb_vbus1_status=1; + } + #endif + #if defined(IFX_GPIO_USB_VBUS2) + if(_core_if->core_no==1 && ifxusb_vbus2_status==0) + { + ifx_gpio_output_set(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB); + ifxusb_vbus2_status=1; + } + #endif + } + #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + #else + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_vbus_status=1; + //usb_set_vbus_on(); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + set_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT); + ifxusb_vbus_status=1; + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0) + { + IFX_PRINT("Can't enable USB1 5.5V power!!\n"); + return; + } + bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB); + bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB); + bsp_port_set_dir_out(1, 13, PORT_MODULE_USB); + bsp_port_set_pudsel(1, 13, PORT_MODULE_USB); + bsp_port_set_puden(1, 13, PORT_MODULE_USB); + bsp_port_set_output(1, 13, PORT_MODULE_USB); + IFX_DEBUGP("Enable USB1 power!!\n"); + ifxusb_vbus1_status=1; + } + else + { + if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0) + { + IFX_PRINT("Can't enable USB2 5.5V power!!\n"); + return; + } + bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB); + bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB); + bsp_port_set_dir_out(3, 4, PORT_MODULE_USB); + bsp_port_set_pudsel(3, 4, PORT_MODULE_USB); + bsp_port_set_puden(3, 4, PORT_MODULE_USB); + bsp_port_set_output(3, 4, PORT_MODULE_USB); + IFX_DEBUGP("Enable USB2 power!!\n"); + ifxusb_vbus2_status=1; + } + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) + if(_core_if->core_no==0) + { + ifxusb_vbus1_status=1; + } + else + { + ifxusb_vbus2_status=1; + } + #endif //defined(__IS_VR9__) + #endif //defined(__UEIP__) +} + + +/*! + \brief Turn off the USB 5V VBus Power + \param _core_if Pointer of core_if structure + */ +void ifxusb_vbus_off(ifxusb_core_if_t *_core_if) +{ + IFX_DEBUGP("SENDING VBus POWER OFF\n"); + + #if defined(__UEIP__) + #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + if ( g_usb_vbus_trigger && ifxusb_vbus_status==1) + { + ifx_led_trigger_deactivate(g_usb_vbus_trigger); + IFX_DEBUGP("Disable USB power!!\n"); + ifxusb_vbus_status=0; + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==1) + { + ifx_led_trigger_deactivate(g_usb_vbus1_trigger); + IFX_DEBUGP("Disable USB1 power!!\n"); + ifxusb_vbus1_status=0; + } + #endif + #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==1) + { + ifx_led_trigger_deactivate(g_usb_vbus2_trigger); + IFX_DEBUGP("Disable USB2 power!!\n"); + ifxusb_vbus2_status=0; + } + #endif + + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + if(ifxusb_vbus_gpio_inited) + { + #if defined(IFX_GPIO_USB_VBUS) + if(ifxusb_vbus_status==1) + { + ifx_gpio_output_clear(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB); + ifxusb_vbus_status=0; + } + #endif + #if defined(IFX_GPIO_USB_VBUS1) + if(_core_if->core_no==0 && ifxusb_vbus1_status==1) + { + ifx_gpio_output_clear(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB); + ifxusb_vbus1_status=0; + } + #endif + #if defined(IFX_GPIO_USB_VBUS2) + if(_core_if->core_no==1 && ifxusb_vbus2_status==1) + { + ifx_gpio_output_clear(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB); + ifxusb_vbus2_status=0; + } + #endif + } + #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2) + #else + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + ifxusb_vbus_status=0; + //usb_set_vbus_on(); + #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) + #if defined(__IS_AMAZON_SE__) + clear_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT); + ifxusb_vbus_status=0; + #endif //defined(__IS_AMAZON_SE__) + #if defined(__IS_AR9__) + if(_core_if->core_no==0) + { + if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0) { + IFX_PRINT("Can't Disable USB1 5.5V power!!\n"); + return; + } + bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB); + bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB); + bsp_port_set_dir_out(1, 13, PORT_MODULE_USB); + bsp_port_set_pudsel(1, 13, PORT_MODULE_USB); + bsp_port_set_puden(1, 13, PORT_MODULE_USB); + bsp_port_clear_output(1, 13, PORT_MODULE_USB); + IFX_DEBUGP("Disable USB1 power!!\n"); + ifxusb_vbus1_status=0; + } + else + { + if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0) { + IFX_PRINT("Can't Disable USB2 5.5V power!!\n"); + return; + } + bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB); + bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB); + bsp_port_set_dir_out(3, 4, PORT_MODULE_USB); + bsp_port_set_pudsel(3, 4, PORT_MODULE_USB); + bsp_port_set_puden(3, 4, PORT_MODULE_USB); + bsp_port_clear_output(3, 4, PORT_MODULE_USB); + IFX_DEBUGP("Disable USB2 power!!\n"); + + ifxusb_vbus2_status=0; + } + #endif //defined(__IS_AR9__) + #if defined(__IS_VR9__) + if(_core_if->core_no==0) + { + ifxusb_vbus1_status=0; + } + else + { + ifxusb_vbus2_status=0; + } + #endif //defined(__IS_VR9__) + #endif //defined(__UEIP__) +} + + + +/*! + \brief Read Current VBus status + \param _core_if Pointer of core_if structure + */ +int ifxusb_vbus(ifxusb_core_if_t *_core_if) +{ +#if defined(__UEIP__) + #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS) + return (ifxusb_vbus_status); + #endif + + #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1) + if(_core_if->core_no==0) + return (ifxusb_vbus1_status); + #endif + + #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2) + if(_core_if->core_no==1) + return (ifxusb_vbus2_status); + #endif +#else //defined(__UEIP__) +#endif + return -1; +} + +#if defined(__UEIP__) +#else + #if defined(__IS_TWINPASS__) + #define ADSL_BASE 0x20000 + #define CRI_BASE 0x31F00 + #define CRI_CCR0 CRI_BASE + 0x00 + #define CRI_CCR1 CRI_BASE + 0x01*4 + #define CRI_CDC0 CRI_BASE + 0x02*4 + #define CRI_CDC1 CRI_BASE + 0x03*4 + #define CRI_RST CRI_BASE + 0x04*4 + #define CRI_MASK0 CRI_BASE + 0x05*4 + #define CRI_MASK1 CRI_BASE + 0x06*4 + #define CRI_MASK2 CRI_BASE + 0x07*4 + #define CRI_STATUS0 CRI_BASE + 0x08*4 + #define CRI_STATUS1 CRI_BASE + 0x09*4 + #define CRI_STATUS2 CRI_BASE + 0x0A*4 + #define CRI_AMASK0 CRI_BASE + 0x0B*4 + #define CRI_AMASK1 CRI_BASE + 0x0C*4 + #define CRI_UPDCTL CRI_BASE + 0x0D*4 + #define CRI_MADST CRI_BASE + 0x0E*4 + // 0x0f is missing + #define CRI_EVENT0 CRI_BASE + 0x10*4 + #define CRI_EVENT1 CRI_BASE + 0x11*4 + #define CRI_EVENT2 CRI_BASE + 0x12*4 + + #define IRI_I_ENABLE 0x32000 + #define STY_SMODE 0x3c004 + #define AFE_TCR_0 0x3c0dc + #define AFE_ADDR_ADDR 0x3c0e8 + #define AFE_RDATA_ADDR 0x3c0ec + #define AFE_WDATA_ADDR 0x3c0f0 + #define AFE_CONFIG 0x3c0f4 + #define AFE_SERIAL_CFG 0x3c0fc + + #define DFE_BASE_ADDR 0xBE116000 + //#define DFE_BASE_ADDR 0x9E116000 + + #define MEI_FR_ARCINT_C (DFE_BASE_ADDR + 0x0000001C) + #define MEI_DBG_WADDR_C (DFE_BASE_ADDR + 0x00000024) + #define MEI_DBG_RADDR_C (DFE_BASE_ADDR + 0x00000028) + #define MEI_DBG_DATA_C (DFE_BASE_ADDR + 0x0000002C) + #define MEI_DBG_DECO_C (DFE_BASE_ADDR + 0x00000030) + #define MEI_DBG_MASTER_C (DFE_BASE_ADDR + 0x0000003C) + + static void WriteARCmem(uint32_t addr, uint32_t data) + { + writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C); + writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C ); + writel(addr ,(volatile uint32_t *)MEI_DBG_WADDR_C ); + writel(data ,(volatile uint32_t *)MEI_DBG_DATA_C ); + while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){}; + writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C); + IFX_DEBUGP("WriteARCmem %08x %08x\n",addr,data); + }; + + static uint32_t ReadARCmem(uint32_t addr) + { + u32 data; + writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C); + writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C ); + writel(addr ,(volatile uint32_t *)MEI_DBG_RADDR_C ); + while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){}; + data = ifxusb_rreg((volatile uint32_t *)MEI_DBG_DATA_C ); + writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C); + IFX_DEBUGP("ReadARCmem %08x %08x\n",addr,data); + return data; + }; + + void ifxusb_enable_afe_oc(void) + { + /* Start the clock */ + WriteARCmem(CRI_UPDCTL ,0x00000008); + WriteARCmem(CRI_CCR0 ,0x00000014); + WriteARCmem(CRI_CCR1 ,0x00000500); + WriteARCmem(AFE_CONFIG ,0x000001c8); + WriteARCmem(AFE_SERIAL_CFG,0x00000016); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge + WriteARCmem(AFE_TCR_0 ,0x00000002); + //Take afe out of reset + WriteARCmem(AFE_CONFIG ,0x000000c0); + WriteARCmem(IRI_I_ENABLE ,0x00000101); + WriteARCmem(STY_SMODE ,0x00001980); + + ReadARCmem(CRI_UPDCTL ); + ReadARCmem(CRI_CCR0 ); + ReadARCmem(CRI_CCR1 ); + ReadARCmem(AFE_CONFIG ); + ReadARCmem(AFE_SERIAL_CFG); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge + ReadARCmem(AFE_TCR_0 ); + ReadARCmem(AFE_CONFIG ); + ReadARCmem(IRI_I_ENABLE ); + ReadARCmem(STY_SMODE ); + } + #endif //defined(__IS_TWINPASS__) +#endif //defined(__UEIP__) + + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_ctl.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_ctl.c new file mode 100644 index 0000000000..ade8e13cb2 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_ctl.c @@ -0,0 +1,1385 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_ctl.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : Implementing the procfs and sysfs for IFX USB driver + *****************************************************************************/ + +/*! \file ifxusb_ctl.c + \ingroup IFXUSB_DRIVER_V3 + \brief Implementing the procfs and sysfs for IFX USB driver +*/ + +#include <linux/version.h> +#include "ifxusb_version.h" + + +#include <linux/proc_fs.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <asm/uaccess.h> + +#include "ifxusb_plat.h" +#include "ifxusb_regs.h" +#include "ifxusb_cif.h" + +#ifdef __IS_DEVICE__ + #include "ifxpcd.h" +#endif + +#ifdef __IS_HOST__ + #include "ifxhcd.h" +#endif + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gfp.h> + + +#ifdef __IS_HOST__ + extern char ifxusb_driver_name[]; + + #ifdef __IS_DUAL__ + extern ifxhcd_hcd_t ifxusb_hcd_1; + extern ifxhcd_hcd_t ifxusb_hcd_2; + extern char ifxusb_hcd_name_1[]; + extern char ifxusb_hcd_name_2[]; + #else + extern ifxhcd_hcd_t ifxusb_hcd; + extern char ifxusb_hcd_name[]; + #endif + +#endif + +#ifdef __IS_DEVICE__ + extern char ifxusb_driver_name[]; + + extern ifxpcd_pcd_t ifxusb_pcd; + extern char ifxusb_pcd_name[]; +#endif + + +//Attributes for sysfs (for 2.6 only) + +extern struct device_attribute dev_attr_dbglevel; + +#ifdef __IS_DUAL__ + extern struct device_attribute dev_attr_dump_params_1; + extern struct device_attribute dev_attr_dump_params_2; +#else + extern struct device_attribute dev_attr_dump_params; +#endif + +#ifdef __IS_DUAL__ + extern struct device_attribute dev_attr_mode_1; + extern struct device_attribute dev_attr_mode_2; +#else + extern struct device_attribute dev_attr_mode; +#endif + +#ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + extern struct device_attribute dev_attr_buspower_1; + extern struct device_attribute dev_attr_buspower_2; + extern struct device_attribute dev_attr_bussuspend_1; + extern struct device_attribute dev_attr_bussuspend_2; + extern struct device_attribute dev_attr_busconnected_1; + extern struct device_attribute dev_attr_busconnected_2; + extern struct device_attribute dev_attr_connectspeed_1; + extern struct device_attribute dev_attr_connectspeed_1; + #else + extern struct device_attribute dev_attr_buspower; + extern struct device_attribute dev_attr_bussuspend; + extern struct device_attribute dev_attr_busconnected; + extern struct device_attribute dev_attr_connectspeed; + #endif +#endif //__IS_HOST__ + +#ifdef __IS_DEVICE__ + extern struct device_attribute dev_attr_devspeed; + extern struct device_attribute dev_attr_enumspeed; +#endif //__IS_DEVICE__ + +#ifdef __ENABLE_DUMP__ + #ifdef __IS_DUAL__ + extern struct device_attribute dev_attr_dump_reg_1; + extern struct device_attribute dev_attr_dump_reg_2; + extern struct device_attribute dev_attr_dump_spram_1; + extern struct device_attribute dev_attr_dump_spram_2; + #ifdef __IS_HOST__ + extern struct device_attribute dev_attr_dump_host_state_1; + extern struct device_attribute dev_attr_dump_host_state_2; + #else + #endif + #else + extern struct device_attribute dev_attr_dump_reg; + extern struct device_attribute dev_attr_dump_spram; + #ifdef __IS_HOST__ + extern struct device_attribute dev_attr_dump_host_state; + #else + #endif + #endif +#endif //__ENABLE_DUMP__ + + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + +static ssize_t procfs_dbglevel_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) +{ + #ifdef __IS_HOST__ + return sprintf( buf, "%08X\n",h_dbg_lvl ); + #else + return sprintf( buf, "%08X\n",d_dbg_lvl ); + #endif +} + +static ssize_t procfs_dbglevel_store(struct file *file, const char *buffer, unsigned long count, void *data) +{ + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + #ifdef __IS_HOST__ + h_dbg_lvl =value; + #else + d_dbg_lvl =value; + #endif + //turn on and off power + return count; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dbglevel_show( struct device *_dev, struct device_attribute *attr,char *buf) +#else + static ssize_t sysfs_dbglevel_show( struct device *_dev, char *buf) +#endif +{ + #ifdef __IS_HOST__ + return sprintf( buf, "%08X\n",h_dbg_lvl ); + #else + return sprintf( buf, "%08X\n",d_dbg_lvl ); + #endif +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dbglevel_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count ) +#else + static ssize_t sysfs_dbglevel_store( struct device *_dev, const char *buffer, size_t count ) +#endif +{ + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + #ifdef __IS_HOST__ + h_dbg_lvl =value; + #else + d_dbg_lvl =value; + #endif + //turn on and off power + return count; +} + +DEVICE_ATTR(dbglevel, S_IRUGO|S_IWUSR, sysfs_dbglevel_show, sysfs_dbglevel_store); + + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + +static void ifxusb_dump_params(ifxusb_core_if_t *_core_if); + +#ifdef __IS_DUAL__ + static void dump_params_1(void) + { + ifxusb_dump_params(&ifxusb_hcd_1.core_if); + } + static void dump_params_2(void) + { + ifxusb_dump_params(&ifxusb_hcd_2.core_if); + } + + static ssize_t procfs_dump_params_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_params_1(); + return 0; + } + static ssize_t procfs_dump_params_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_params_2(); + return 0; + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_params_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_params_show_1( struct device *_dev,char *buf) + #endif + { + dump_params_1(); + return 0; + } + DEVICE_ATTR(dump_params_1, S_IRUGO|S_IWUSR, sysfs_dump_params_show_1, NULL); + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_params_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_params_show_2( struct device *_dev,char *buf) + #endif + { + dump_params_2(); + return 0; + } + + DEVICE_ATTR(dump_params_2, S_IRUGO|S_IWUSR, sysfs_dump_params_show_2, NULL); +#else + static void dump_params(void) + { + #ifdef __IS_HOST__ + ifxusb_dump_params(&ifxusb_hcd.core_if); + #else + ifxusb_dump_params(&ifxusb_pcd.core_if); + #endif + } + + static ssize_t procfs_dump_params_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_params(); + return 0; + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_params_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_params_show( struct device *_dev,char *buf) + #endif + { + dump_params(); + return 0; + } + DEVICE_ATTR(dump_params, S_IRUGO|S_IWUSR, sysfs_dump_params_show, NULL); +#endif + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + +#ifdef __IS_DUAL__ + static ssize_t mode_show_1(char *buf) + { + if((ifxusb_rreg(&ifxusb_hcd_1.core_if.core_global_regs->gintsts ) & 0x1) == 1) + return sprintf( buf, "HOST\n" ); + else + return sprintf( buf, "DEVICE(INCORRECT!)\n" ); + } + + static ssize_t mode_show_2(char *buf) + { + if((ifxusb_rreg(&ifxusb_hcd_2.core_if.core_global_regs->gintsts ) & 0x1) == 1) + return sprintf( buf, "HOST\n" ); + else + return sprintf( buf, "DEVICE(INCORRECT!)\n" ); + } + + static ssize_t procfs_mode_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return mode_show_1(buf); + } + static ssize_t procfs_mode_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return mode_show_2(buf); + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_mode_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_mode_show_1( struct device *_dev,char *buf) + #endif + { + return mode_show_1(buf); + } + + DEVICE_ATTR(mode_1, S_IRUGO|S_IWUSR, sysfs_mode_show_1, 0); + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_mode_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_mode_show_2( struct device *_dev,char *buf) + #endif + { + return mode_show_2(buf); + } + DEVICE_ATTR(mode_2, S_IRUGO|S_IWUSR, sysfs_mode_show_2, NULL); +#else + static ssize_t mode_show(char *buf) + { + #ifdef __IS_HOST__ + if((ifxusb_rreg(&ifxusb_hcd.core_if.core_global_regs->gintsts ) & 0x1) == 1) + return sprintf( buf, "HOST\n" ); + else + return sprintf( buf, "DEVICE(INCORRECT!)\n" ); + #else + if((ifxusb_rreg(&ifxusb_pcd.core_if.core_global_regs->gintsts ) & 0x1) != 1) + return sprintf( buf, "DEVICE\n" ); + else + return sprintf( buf, "HOST(INCORRECT!)\n" ); + #endif + } + static ssize_t procfs_mode_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return mode_show(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_mode_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_mode_show( struct device *_dev, char *buf) + #endif + { + return mode_show(buf); + } + DEVICE_ATTR(mode, S_IRUGO|S_IWUSR, sysfs_mode_show, NULL); +#endif + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + +#ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + static ssize_t buspower_show_1(char *buf) + { + if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==1) return sprintf( buf, "1\n" ); + if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==0) return sprintf( buf, "0\n" ); + return sprintf( buf, "UNKNOWN\n" ); + } + static void buspower_store_1(uint32_t value) + { + if (value==1) ifxusb_vbus_on (&ifxusb_hcd_1.core_if); + else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_1.core_if); + } + static ssize_t buspower_show_2(char *buf) + { + if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==1) return sprintf( buf, "1\n" ); + if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==0) return sprintf( buf, "0\n" ); + return sprintf( buf, "UNKNOWN\n" ); + } + static void buspower_store_2(uint32_t value) + { + if (value==1) ifxusb_vbus_on (&ifxusb_hcd_2.core_if); + else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_2.core_if); + } + static ssize_t procfs_buspower_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return buspower_show_1(buf); + } + static ssize_t procfs_buspower_store_1(struct file *file, const char *buffer, unsigned long count, void *data) + { + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + buspower_store_1(value); + return count; + } + static ssize_t procfs_buspower_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return buspower_show_2(buf); + } + static ssize_t procfs_buspower_store_2(struct file *file, const char *buffer, unsigned long count, void *data) + { + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + buspower_store_2(value); + return count; + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_buspower_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_buspower_show_1( struct device *_dev,char *buf) + #endif + { + return buspower_show_1(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_buspower_store_1( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count ) + #else + static ssize_t sysfs_buspower_store_1( struct device *_dev, const char *buffer, size_t count ) + #endif + { + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + buspower_store_1(value); + return count; + } + DEVICE_ATTR(buspower_1, S_IRUGO|S_IWUSR, sysfs_buspower_show_1, sysfs_buspower_store_1); + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_buspower_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_buspower_show_2( struct device *_dev,char *buf) + #endif + { + return buspower_show_2(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_buspower_store_2( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count ) + #else + static ssize_t sysfs_buspower_store_2( struct device *_dev, const char *buffer, size_t count ) + #endif + { + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + buspower_store_2(value); + return count; + } + DEVICE_ATTR(buspower_2, S_IRUGO|S_IWUSR, sysfs_buspower_show_2, sysfs_buspower_store_2); + #else + static ssize_t buspower_show(char *buf) + { + if(ifxusb_vbus (&ifxusb_hcd.core_if)==1) return sprintf( buf, "1\n" ); + if(ifxusb_vbus (&ifxusb_hcd.core_if)==0) return sprintf( buf, "0\n" ); + return sprintf( buf, "UNKNOWN\n" ); + } + static void buspower_store(uint32_t value) + { + if (value==1) ifxusb_vbus_on (&ifxusb_hcd.core_if); + else if(value==0) ifxusb_vbus_off(&ifxusb_hcd.core_if); + } + static ssize_t procfs_buspower_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return buspower_show(buf); + } + static ssize_t procfs_buspower_store(struct file *file, const char *buffer, unsigned long count, void *data) + { + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + buspower_store(value); + return count; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_buspower_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_buspower_show( struct device *_dev, char *buf) + #endif + { + return buspower_show(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_buspower_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count ) + #else + static ssize_t sysfs_buspower_store( struct device *_dev, const char *buffer, size_t count ) + #endif + { + char buf[10]; + int i = 0; + uint32_t value; + if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1)) + return -EFAULT; + value = simple_strtoul(buf, NULL, 16); + buspower_store(value); + return count; + } + DEVICE_ATTR(buspower, S_IRUGO|S_IWUSR, sysfs_buspower_show, sysfs_buspower_store); + #endif + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + + + #ifdef __IS_DUAL__ + static ssize_t bussuspend_show_1(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0); + return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp); + } + static ssize_t bussuspend_show_2(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0); + return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp); + } + + static ssize_t procfs_bussuspend_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return bussuspend_show_1(buf); + } + static ssize_t procfs_bussuspend_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return bussuspend_show_2(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_bussuspend_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_bussuspend_show_1( struct device *_dev,char *buf) + #endif + { + return bussuspend_show_1(buf); + } + DEVICE_ATTR(bussuspend_1, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_1, 0); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_bussuspend_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_bussuspend_show_2( struct device *_dev,char *buf) + #endif + { + return bussuspend_show_2(buf); + } + DEVICE_ATTR(bussuspend_2, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_2, 0); + #else + static ssize_t bussuspend_show(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0); + return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp); + } + static ssize_t procfs_bussuspend_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return bussuspend_show(buf); + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_bussuspend_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_bussuspend_show( struct device *_dev, char *buf) + #endif + { + return bussuspend_show(buf); + } + DEVICE_ATTR(bussuspend, S_IRUGO|S_IWUSR, sysfs_bussuspend_show, 0); + #endif + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + + #ifdef __IS_DUAL__ + static ssize_t busconnected_show_1(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0); + return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts); + } + static ssize_t busconnected_show_2(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0); + return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts); + } + + static ssize_t procfs_busconnected_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return busconnected_show_1(buf); + } + static ssize_t procfs_busconnected_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return busconnected_show_2(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_busconnected_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_busconnected_show_1( struct device *_dev,char *buf) + #endif + { + return busconnected_show_1(buf); + } + DEVICE_ATTR(busconnected_1, S_IRUGO|S_IWUSR, sysfs_busconnected_show_1, 0); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_busconnected_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_busconnected_show_2( struct device *_dev,char *buf) + #endif + { + return busconnected_show_2(buf); + } + DEVICE_ATTR(busconnected_2, S_IRUGO|S_IWUSR, sysfs_busconnected_show_2, 0); + #else + static ssize_t busconnected_show(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0); + return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts); + } + static ssize_t procfs_busconnected_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return busconnected_show(buf); + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_busconnected_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_busconnected_show( struct device *_dev, char *buf) + #endif + { + return busconnected_show(buf); + } + DEVICE_ATTR(busconnected, S_IRUGO|S_IWUSR, sysfs_busconnected_show, 0); + #endif + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + + #ifdef __IS_DUAL__ + static ssize_t connectspeed_show_1(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0); + if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd); + if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd); + if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd); + return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd); + } + static ssize_t connectspeed_show_2(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0); + if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd); + if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd); + if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd); + return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd); + } + + static ssize_t procfs_connectspeed_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return connectspeed_show_1(buf); + } + static ssize_t procfs_connectspeed_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return connectspeed_show_2(buf); + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_connectspeed_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_connectspeed_show_1( struct device *_dev,char *buf) + #endif + { + return connectspeed_show_1(buf); + } + DEVICE_ATTR(connectspeed_1, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_1, 0); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_connectspeed_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_connectspeed_show_2( struct device *_dev,char *buf) + #endif + { + return connectspeed_show_2(buf); + } + DEVICE_ATTR(connectspeed_2, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_2, 0); + #else + static ssize_t connectspeed_show(char *buf) + { + hprt0_data_t val; + val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0); + if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd); + if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd); + if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd); + return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd); + } + + static ssize_t procfs_connectspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return connectspeed_show(buf); + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_connectspeed_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_connectspeed_show( struct device *_dev, char *buf) + #endif + { + return connectspeed_show(buf); + } + DEVICE_ATTR(connectspeed, S_IRUGO|S_IWUSR, sysfs_connectspeed_show, 0); + #endif +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +#endif + + +#ifdef __IS_DEVICE__ +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + static ssize_t devspeed_show(char *buf) + { + dcfg_data_t val; + val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dcfg); + if( val.b.devspd ==0) return sprintf (buf, "Dev Speed = High (%d)\n", val.b.devspd); + if( val.b.devspd ==1) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd); + if( val.b.devspd ==3) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd); + return sprintf (buf, "Dev Speed = Unknown (%d)\n", val.b.devspd); + } + + static ssize_t procfs_devspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return devspeed_show(buf); + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_devspeed_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_devspeed_show( struct device *_dev, char *buf) + #endif + { + return devspeed_show(buf); + } + DEVICE_ATTR(devspeed, S_IRUGO|S_IWUSR, sysfs_devspeed_show, 0); + + static ssize_t enumspeed_show(char *buf) + { + dsts_data_t val; + val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dsts); + if( val.b.enumspd ==0) return sprintf (buf, "Enum Speed = High (%d)\n", val.b.enumspd); + if( val.b.enumspd ==1) return sprintf (buf, "Enum Speed = Full (%d)\n", val.b.enumspd); + if( val.b.enumspd ==2) return sprintf (buf, "Enum Speed = Low (%d)\n", val.b.enumspd); + return sprintf (buf, "Enum Speed = invalid(%d)\n", val.b.enumspd); + } + + static ssize_t procfs_enumspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + return enumspeed_show(buf); + } + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_enumspeed_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_enumspeed_show( struct device *_dev, char *buf) + #endif + { + return enumspeed_show(buf); + } + DEVICE_ATTR(enumspeed, S_IRUGO|S_IWUSR, sysfs_enumspeed_show, 0); +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +#endif + + +////////////////////////////////////////////////////////////////////////////////// +#ifdef __ENABLE_DUMP__ + + #ifdef __IS_DUAL__ + static void dump_reg_1(void) + { + ifxusb_dump_registers(&ifxusb_hcd_1.core_if); + } + static void dump_reg_2(void) + { + ifxusb_dump_registers(&ifxusb_hcd_2.core_if); + } + + static ssize_t procfs_dump_reg_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_reg_1(); + return 0; + } + static ssize_t procfs_dump_reg_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_reg_2(); + return 0; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_reg_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_reg_show_1( struct device *_dev,char *buf) + #endif + { + dump_reg_1(); + return 0; + } + DEVICE_ATTR(dump_reg_1, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_1, 0); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_reg_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_reg_show_2( struct device *_dev,char *buf) + #endif + { + dump_reg_2(); + return 0; + } + DEVICE_ATTR(dump_reg_2, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_2, 0); + #else + static void dump_reg(void) + { + #ifdef __IS_HOST__ + ifxusb_dump_registers(&ifxusb_hcd.core_if); + #endif + #ifdef __IS_DEVICE__ + ifxusb_dump_registers(&ifxusb_pcd.core_if); + #endif + } + static ssize_t procfs_dump_reg_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_reg(); + return 0; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_reg_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_reg_show( struct device *_dev,char *buf) + #endif + { + dump_reg(); + return 0; + } + DEVICE_ATTR(dump_reg, S_IRUGO|S_IWUSR, sysfs_dump_reg_show, 0); + #endif + + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + + #ifdef __IS_DUAL__ + static void dump_spram_1(void) + { + ifxusb_dump_spram(&ifxusb_hcd_1.core_if); + } + static void dump_spram_2(void) + { + ifxusb_dump_spram(&ifxusb_hcd_2.core_if); + } + + static ssize_t procfs_dump_spram_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_spram_1(); + return 0; + } + static ssize_t procfs_dump_spram_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_spram_2(); + return 0; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_spram_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_spram_show_1( struct device *_dev,char *buf) + #endif + { + dump_spram_1(); + return 0; + } + DEVICE_ATTR(dump_spram_1, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_1, 0); + + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_spram_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_spram_show_2( struct device *_dev,char *buf) + #endif + { + dump_spram_2(); + return 0; + } + DEVICE_ATTR(dump_spram_2, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_2, 0); + #else + static void dump_spram(void) + { + #ifdef __IS_HOST__ + ifxusb_dump_spram(&ifxusb_hcd.core_if); + #endif + #ifdef __IS_DEVICE__ + ifxusb_dump_spram(&ifxusb_pcd.core_if); + #endif + } + static ssize_t procfs_dump_spram_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + dump_spram(); + return 0; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_spram_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_spram_show( struct device *_dev,char *buf) + #endif + { + dump_spram(); + return 0; + } + DEVICE_ATTR(dump_spram, S_IRUGO|S_IWUSR, sysfs_dump_spram_show, 0); + #endif +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + + #ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + static ssize_t procfs_dump_host_state_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + ifxhcd_dump_state(&ifxusb_hcd_1); + return 0; + } + static ssize_t procfs_dump_host_state_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + ifxhcd_dump_state(&ifxusb_hcd_2); + return 0; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_host_state_show_1( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_host_state_show_1( struct device *_dev,char *buf) + #endif + { + ifxhcd_dump_state(&ifxusb_hcd_1); + return 0; + } + DEVICE_ATTR(dump_host_state_1, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_1, 0); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_host_state_show_2( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_host_state_show_2( struct device *_dev,char *buf) + #endif + { + ifxhcd_dump_state(&ifxusb_hcd_2); + return 0; + } + DEVICE_ATTR(dump_host_state_2, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_2, 0); + #else + static ssize_t procfs_dump_host_state_show(char *buf, char **start, off_t offset, int count, int *eof, void *data) + { + ifxhcd_dump_state(&ifxusb_hcd); + return 0; + } + #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + static ssize_t sysfs_dump_host_state_show( struct device *_dev, struct device_attribute *attr,char *buf) + #else + static ssize_t sysfs_dump_host_state_show( struct device *_dev,char *buf) + #endif + { + ifxhcd_dump_state(&ifxusb_hcd); + return 0; + } + DEVICE_ATTR(dump_host_state, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show, 0); + #endif + +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////////////////////////////////////////////////////////////////////////////// + + #endif //IS_HOST_ + +#endif //__ENABLE_DUMP__ + +////////////////////////////////////////////////////////////////////////////////// + +static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw); +static void ifx_proc_delproc(char *funcname); + +////////////////////////////////////////////////////////////////////////////////// + +/*! + \brief This function create the sysfs and procfs entries + \param[in] _dev Pointer of device structure, if applied + */ +void ifxusb_attr_create (void *_dev) +{ + int error; + + struct device *dev = (struct device *) _dev; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + error = ifx_proc_addproc("dbglevel", procfs_dbglevel_show, procfs_dbglevel_store); + error = device_create_file(dev, &dev_attr_dbglevel); + + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("dump_params_1", procfs_dump_params_show_1, NULL); + error = ifx_proc_addproc("dump_params_2", procfs_dump_params_show_2, NULL); + error = device_create_file(dev, &dev_attr_dump_params_1); + error = device_create_file(dev, &dev_attr_dump_params_2); + #else + error = ifx_proc_addproc("dump_params", procfs_dump_params_show, NULL); + error = device_create_file(dev, &dev_attr_dump_params); + #endif + + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("mode_1", procfs_mode_show_1, NULL); + error = ifx_proc_addproc("mode_2", procfs_mode_show_2, NULL); + error = device_create_file(dev, &dev_attr_mode_1); + error = device_create_file(dev, &dev_attr_mode_2); + #else + error = ifx_proc_addproc("mode", procfs_mode_show, NULL); + error = device_create_file(dev, &dev_attr_mode); + #endif + + #ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("buspower_1", procfs_buspower_show_1, procfs_buspower_store_1); + error = ifx_proc_addproc("buspower_2", procfs_buspower_show_2, procfs_buspower_store_2); + error = device_create_file(dev, &dev_attr_buspower_1); + error = device_create_file(dev, &dev_attr_buspower_2); + #else + error = ifx_proc_addproc("buspower", procfs_buspower_show, procfs_buspower_store); + error = device_create_file(dev, &dev_attr_buspower); + #endif + + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("bussuspend_1", procfs_bussuspend_show_1, NULL); + error = ifx_proc_addproc("bussuspend_2", procfs_bussuspend_show_2, NULL); + error = device_create_file(dev, &dev_attr_bussuspend_1); + error = device_create_file(dev, &dev_attr_bussuspend_2); + #else + error = ifx_proc_addproc("bussuspend", procfs_bussuspend_show, NULL); + error = device_create_file(dev, &dev_attr_bussuspend); + #endif + + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("busconnected_1", procfs_busconnected_show_1, NULL); + error = ifx_proc_addproc("busconnected_2", procfs_busconnected_show_2, NULL); + error = device_create_file(dev, &dev_attr_busconnected_1); + error = device_create_file(dev, &dev_attr_busconnected_2); + #else + error = ifx_proc_addproc("busconnected", procfs_busconnected_show, NULL); + error = device_create_file(dev, &dev_attr_busconnected); + #endif + + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("connectspeed_1", procfs_connectspeed_show_1, NULL); + error = ifx_proc_addproc("connectspeed_2", procfs_connectspeed_show_2, NULL); + error = device_create_file(dev, &dev_attr_connectspeed_1); + error = device_create_file(dev, &dev_attr_connectspeed_2); + #else + error = ifx_proc_addproc("connectspeed", procfs_connectspeed_show, NULL); + error = device_create_file(dev, &dev_attr_connectspeed); + #endif + #endif + + #ifdef __IS_DEVICE__ + error = ifx_proc_addproc("devspeed", procfs_devspeed_show, NULL); + error = device_create_file(dev, &dev_attr_devspeed); + error = ifx_proc_addproc("enumspeed", procfs_enumspeed_show, NULL); + error = device_create_file(dev, &dev_attr_enumspeed); + #endif + + ////////////////////////////////////////////////////// + #ifdef __ENABLE_DUMP__ + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("dump_reg_1", procfs_dump_reg_show_1, NULL); + error = ifx_proc_addproc("dump_reg_2", procfs_dump_reg_show_2, NULL); + error = device_create_file(dev, &dev_attr_dump_reg_1); + error = device_create_file(dev, &dev_attr_dump_reg_2); + #else + error = ifx_proc_addproc("dump_reg", procfs_dump_reg_show, NULL); + error = device_create_file(dev, &dev_attr_dump_reg); + #endif + + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("dump_spram_1", procfs_dump_spram_show_1, NULL); + error = ifx_proc_addproc("dump_spram_2", procfs_dump_spram_show_2, NULL); + error = device_create_file(dev, &dev_attr_dump_spram_1); + error = device_create_file(dev, &dev_attr_dump_spram_2); + #else + error = ifx_proc_addproc("dump_spram", procfs_dump_spram_show, NULL); + error = device_create_file(dev, &dev_attr_dump_spram); + #endif + + #ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + error = ifx_proc_addproc("dump_host_state_1", procfs_dump_host_state_show_1, NULL); + error = ifx_proc_addproc("dump_host_state_2", procfs_dump_host_state_show_2, NULL); + error = device_create_file(dev, &dev_attr_dump_host_state_1); + error = device_create_file(dev, &dev_attr_dump_host_state_2); + #else + error = ifx_proc_addproc("dump_host_state", procfs_dump_host_state_show, NULL); + error = device_create_file(dev, &dev_attr_dump_host_state); + #endif + #endif + #endif //__ENABLE_DUMP__ + ////////////////////////////////////////////////////// +} + + +/*! + \brief This function remove the sysfs and procfs entries + \param[in] _dev Pointer of device structure, if applied + */ +void ifxusb_attr_remove (void *_dev) +{ + struct device *dev = (struct device *) _dev; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + ifx_proc_delproc("dbglevel"); + device_remove_file(dev, &dev_attr_dbglevel); + + #ifdef __IS_DUAL__ + ifx_proc_delproc("dump_params_1"); + ifx_proc_delproc("dump_params_2"); + device_remove_file(dev, &dev_attr_dump_params_1); + device_remove_file(dev, &dev_attr_dump_params_2); + #else + ifx_proc_delproc("dump_params"); + device_remove_file(dev, &dev_attr_dump_params); + #endif + + #ifdef __IS_DUAL__ + ifx_proc_delproc("mode_1"); + ifx_proc_delproc("mode_2"); + device_remove_file(dev, &dev_attr_mode_1); + device_remove_file(dev, &dev_attr_mode_2); + #else + ifx_proc_delproc("mode"); + device_remove_file(dev, &dev_attr_mode); + #endif + + #ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + ifx_proc_delproc("buspower_1"); + ifx_proc_delproc("buspower_2"); + device_remove_file(dev, &dev_attr_buspower_1); + device_remove_file(dev, &dev_attr_buspower_2); + #else + ifx_proc_delproc("buspower"); + device_remove_file(dev, &dev_attr_buspower); + #endif + + #ifdef __IS_DUAL__ + ifx_proc_delproc("bussuspend_1"); + ifx_proc_delproc("bussuspend_2"); + device_remove_file(dev, &dev_attr_bussuspend_1); + device_remove_file(dev, &dev_attr_bussuspend_2); + #else + ifx_proc_delproc("bussuspend"); + device_remove_file(dev, &dev_attr_bussuspend); + #endif + + #ifdef __IS_DUAL__ + ifx_proc_delproc("busconnected_1"); + ifx_proc_delproc("busconnected_2"); + device_remove_file(dev, &dev_attr_busconnected_1); + device_remove_file(dev, &dev_attr_busconnected_2); + #else + ifx_proc_delproc("busconnected"); + device_remove_file(dev, &dev_attr_busconnected); + #endif + + #ifdef __IS_DUAL__ + ifx_proc_delproc("connectspeed_1"); + ifx_proc_delproc("connectspeed_2"); + device_remove_file(dev, &dev_attr_connectspeed_1); + device_remove_file(dev, &dev_attr_connectspeed_2); + #else + ifx_proc_delproc("connectspeed"); + device_remove_file(dev, &dev_attr_connectspeed); + #endif + #endif + + #ifdef __IS_DEVICE__ + ifx_proc_delproc("devspeed"); + device_remove_file(dev, &dev_attr_devspeed); + ifx_proc_delproc("enumspeed"); + device_remove_file(dev, &dev_attr_enumspeed); + #endif + + #ifdef __ENABLE_DUMP__ + #ifdef __IS_DUAL__ + ifx_proc_delproc("dump_reg_1"); + ifx_proc_delproc("dump_reg_2"); + device_remove_file(dev, &dev_attr_dump_reg_1); + device_remove_file(dev, &dev_attr_dump_reg_2); + #else + ifx_proc_delproc("dump_reg"); + device_remove_file(dev, &dev_attr_dump_reg); + #endif + + #ifdef __IS_DUAL__ + ifx_proc_delproc("dump_spram_1"); + ifx_proc_delproc("dump_spram_2"); + device_remove_file(dev, &dev_attr_dump_spram_1); + device_remove_file(dev, &dev_attr_dump_spram_2); + #else + ifx_proc_delproc("dump_spram"); + device_remove_file(dev, &dev_attr_dump_spram); + #endif + + #ifdef __IS_HOST__ + #ifdef __IS_DUAL__ + ifx_proc_delproc("dump_host_state_1"); + ifx_proc_delproc("dump_host_state_2"); + device_remove_file(dev, &dev_attr_dump_host_state_1); + device_remove_file(dev, &dev_attr_dump_host_state_2); + #else + ifx_proc_delproc("dump_host_state"); + device_remove_file(dev, &dev_attr_dump_host_state); + #endif + #endif + #endif //__ENABLE_DUMP__ + /* AVM/WK fix: del IFXUSB root dir*/ + ifx_proc_delproc(NULL); +} + +static struct proc_dir_entry * proc_ifx_root = NULL; + +/* initialize the proc file system and make a dir named /proc/[name] */ +static void ifx_proc_init(void) +{ + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + proc_ifx_root = proc_mkdir(ifxusb_driver_name, (void *)0); + if (!proc_ifx_root){ + IFX_PRINT("%s proc initialization failed! \n", ifxusb_driver_name); + return; + } +} + +/* proc file system add function for debugging. */ +static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw) +{ + struct proc_dir_entry *pe; + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + if (!proc_ifx_root) + ifx_proc_init(); + + if (hookfuncw == NULL) + { + pe = create_proc_read_entry(funcname, S_IRUGO, proc_ifx_root, hookfuncr, NULL); + if (!pe) + { + IFX_PRINT("ERROR in creating read proc entry (%s)! \n", funcname); + return -1; + } + } + else + { + pe = create_proc_entry(funcname, S_IRUGO | S_IWUGO, proc_ifx_root); + if (pe) + { + pe->read_proc = hookfuncr; + pe->write_proc = hookfuncw; + } + else + { + IFX_PRINT("ERROR in creating proc entry (%s)! \n", funcname); + return -1; + } + } + return 0; +} + + +/* proc file system del function for removing module. */ +static void ifx_proc_delproc(char *funcname) +{ +/* AVM/WK Fix*/ + if (funcname != NULL) { + remove_proc_entry(funcname, proc_ifx_root); + } else { + remove_proc_entry(ifxusb_driver_name, NULL); + proc_ifx_root = NULL; + } +} + +static void ifxusb_dump_params(ifxusb_core_if_t *_core_if) +{ + ifxusb_params_t *params=&_core_if->params; + + #ifdef __IS_HOST__ + IFX_PRINT("IFXUSB Dump Parameters ( Host Mode) \n"); + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ + IFX_PRINT("IFXUSB Dump Parameters ( Device Mode) \n"); + #endif //__IS_DEVICE__ + + #ifdef __DESC_DMA__ + IFX_PRINT("DMA: Hermes DMA\n"); + #else + IFX_PRINT("DMA: Non-Desc DMA\n"); + #endif + IFX_PRINT(" Burst size: %d\n",params->dma_burst_size); + + if (params->speed==1) + IFX_PRINT("Full Speed only\n"); + else if(params->speed==0) + IFX_PRINT("Full/Hign Speed\n"); + else + IFX_PRINT("Unkonwn setting (%d) for Speed\n",params->speed); + + IFX_PRINT("Total Data FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n", + params->data_fifo_size,params->data_fifo_size, + params->data_fifo_size*4, params->data_fifo_size*4 + ); + + #ifdef __IS_DEVICE__ + IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n", + params->rx_fifo_size,params->rx_fifo_size, + params->rx_fifo_size*4, params->rx_fifo_size*4 + ); + { + int i; + for(i=0;i<MAX_EPS_CHANNELS;i++) + { + IFX_PRINT("Tx FIFO #%d size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",i, + params->tx_fifo_size[i],params->tx_fifo_size[i], + params->tx_fifo_size[i]*4, params->tx_fifo_size[i]*4 + ); + } + } + #ifdef __DED_FIFO__ + IFX_PRINT("Treshold : %s Rx:%d Tx:%d \n", + (params->thr_ctl)?"On":"Off",params->tx_thr_length,params->rx_thr_length); + #endif + #else //__IS_HOST__ + IFX_PRINT("Host Channels: %d\n",params->host_channels); + + IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n", + params->data_fifo_size,params->data_fifo_size, + params->data_fifo_size*4, params->data_fifo_size*4 + ); + + IFX_PRINT("NP Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n", + params->nperio_tx_fifo_size,params->nperio_tx_fifo_size, + params->nperio_tx_fifo_size*4, params->nperio_tx_fifo_size*4 + ); + + IFX_PRINT(" P Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n", + params->perio_tx_fifo_size,params->perio_tx_fifo_size, + params->perio_tx_fifo_size*4, params->perio_tx_fifo_size*4 + ); + #endif //__IS_HOST__ + + IFX_PRINT("Max Transfer size: %d(0x%06X) Bytes\n", + params->max_transfer_size,params->max_transfer_size + ); + IFX_PRINT("Max Packet Count: %d(0x%06X)\n", + params->max_packet_count,params->max_packet_count + ); + + IFX_PRINT("PHY UTMI Width: %d\n",params->phy_utmi_width); + + IFX_PRINT("Turn Around Time: HS:%d FS:%d\n",params->turn_around_time_hs,params->turn_around_time_fs); + IFX_PRINT("Timeout Calibration: HS:%d FS:%d\n",params->timeout_cal_hs,params->timeout_cal_fs); + + + IFX_PRINT("==================================================\n"); + IFX_PRINT("End of Parameters Dump\n"); + IFX_PRINT("==================================================\n"); +} + + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_driver.c b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_driver.c new file mode 100644 index 0000000000..23349059f4 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_driver.c @@ -0,0 +1,970 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_driver.c + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : The provides the initialization and cleanup entry + ** points for the IFX USB driver. This module can be + ** dynamically loaded with insmod command or built-in + ** with kernel. When loaded or executed the ifxusb_driver_init + ** function is called. When the module is removed (using rmmod), + ** the ifxusb_driver_cleanup function is called. + *****************************************************************************/ + +/*! + \file ifxusb_driver.c + \brief This file contains the loading/unloading interface to the Linux driver. +*/ + +#include <linux/version.h> +#include "ifxusb_version.h" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> + +#include <linux/device.h> +#include <linux/platform_device.h> + +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/stat.h> /* permission constants */ +#include <linux/gpio.h> +#include <lantiq_soc.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + #include <linux/irq.h> +#endif + +#include <asm/io.h> + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + #include <asm/irq.h> +#endif + +#include "ifxusb_plat.h" + +#include "ifxusb_cif.h" + +#ifdef __IS_HOST__ + #include "ifxhcd.h" + + #define USB_DRIVER_DESC "IFX USB HCD driver" + const char ifxusb_driver_name[] = "ifxusb_hcd"; + + #ifdef __IS_DUAL__ + ifxhcd_hcd_t ifxusb_hcd_1; + ifxhcd_hcd_t ifxusb_hcd_2; + const char ifxusb_hcd_name_1[] = "ifxusb_hcd_1"; + const char ifxusb_hcd_name_2[] = "ifxusb_hcd_2"; + #else + ifxhcd_hcd_t ifxusb_hcd; + const char ifxusb_hcd_name[] = "ifxusb_hcd"; + #endif + + #if defined(__DO_OC_INT__) + static unsigned int oc_int_installed=0; + static ifxhcd_hcd_t *oc_int_id=NULL; + #endif +#endif + +#ifdef __IS_DEVICE__ + #include "ifxpcd.h" + + #define USB_DRIVER_DESC "IFX USB PCD driver" + const char ifxusb_driver_name[] = "ifxusb_pcd"; + + ifxpcd_pcd_t ifxusb_pcd; + const char ifxusb_pcd_name[] = "ifxusb_pcd"; +#endif + +/* Global Debug Level Mask. */ +#ifdef __IS_HOST__ + uint32_t h_dbg_lvl = 0x00; +#endif + +#ifdef __IS_DEVICE__ + uint32_t d_dbg_lvl = 0x00; +#endif + +ifxusb_params_t ifxusb_module_params; + +static void parse_parms(void); + + +#include <lantiq_irq.h> +#define IFX_USB0_IR (INT_NUM_IM1_IRL0 + 22) +#define IFX_USB1_IR (INT_NUM_IM2_IRL0 + 19) + +/*! + \brief This function is called when a driver is unregistered. This happens when + the rmmod command is executed. The device may or may not be electrically + present. If it is present, the driver stops device processing. Any resources + used on behalf of this device are freed. +*/ +static int ifxusb_driver_remove(struct platform_device *_dev) +{ + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + #ifdef __IS_HOST__ + #if defined(__DO_OC_INT__) + #if defined(__DO_OC_INT_ENABLE__) + ifxusb_oc_int_off(); + #endif + + if(oc_int_installed && oc_int_id) + free_irq((unsigned int)IFXUSB_OC_IRQ, oc_int_id ); + oc_int_installed=0; + oc_int_id=NULL; + #endif + + #if defined(__IS_DUAL__) + ifxhcd_remove(&ifxusb_hcd_1); + ifxusb_core_if_remove(&ifxusb_hcd_1.core_if ); + ifxhcd_remove(&ifxusb_hcd_2); + ifxusb_core_if_remove(&ifxusb_hcd_2.core_if ); + #else + ifxhcd_remove(&ifxusb_hcd); + ifxusb_core_if_remove(&ifxusb_hcd.core_if ); + #endif + #endif + + #ifdef __IS_DEVICE__ + ifxpcd_remove(); + ifxusb_core_if_remove(&ifxusb_pcd.core_if ); + #endif + + /* Remove the device attributes */ + + ifxusb_attr_remove(&_dev->dev); + + return 0; +} + + +/* Function to setup the structures to control one usb core running as host*/ +#ifdef __IS_HOST__ +/*! + \brief inlined by ifxusb_driver_probe(), handling host mode probing. Run at each host core. +*/ + static inline int ifxusb_driver_probe_h(ifxhcd_hcd_t *_hcd, + int _irq, + uint32_t _iobase, + uint32_t _fifomem, + uint32_t _fifodbg + ) + { + int retval = 0; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + +#ifdef __DEV_NEW__ + ifxusb_power_off (&_hcd->core_if); + ifxusb_phy_power_off (&_hcd->core_if); // Test + mdelay(500); +#endif //__DEV_NEW__ + ifxusb_power_on (&_hcd->core_if); + mdelay(50); + ifxusb_phy_power_on (&_hcd->core_if); // Test + mdelay(50); + ifxusb_hard_reset(&_hcd->core_if); + retval =ifxusb_core_if_init(&_hcd->core_if, + _irq, + _iobase, + _fifomem, + _fifodbg); + if(retval) + return retval; + + ifxusb_host_core_init(&_hcd->core_if,&ifxusb_module_params); + + ifxusb_disable_global_interrupts( &_hcd->core_if); + + /* The driver is now initialized and need to be registered into Linux USB sub-system */ + + retval = ifxhcd_init(_hcd); // hook the hcd into usb ss + + if (retval != 0) + { + IFX_ERROR("_hcd_init failed\n"); + return retval; + } + + //ifxusb_enable_global_interrupts( _hcd->core_if ); // this should be done at hcd_start , including hcd_interrupt + return 0; + } +#endif //__IS_HOST__ + +#ifdef __IS_DEVICE__ +/*! + \brief inlined by ifxusb_driver_probe(), handling device mode probing. +*/ + static inline int ifxusb_driver_probe_d(ifxpcd_pcd_t *_pcd, + int _irq, + uint32_t _iobase, + uint32_t _fifomem, + uint32_t _fifodbg + ) + { + int retval = 0; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); +#ifdef __DEV_NEW__ + ifxusb_power_off (&_pcd->core_if); + ifxusb_phy_power_off (&_pcd->core_if); // Test + mdelay(500); +#endif // __DEV_NEW__ + ifxusb_power_on (&_pcd->core_if); + mdelay(50); + ifxusb_phy_power_on (&_pcd->core_if); // Test + mdelay(50); + ifxusb_hard_reset(&_pcd->core_if); + retval =ifxusb_core_if_init(&_pcd->core_if, + _irq, + _iobase, + _fifomem, + _fifodbg); + if(retval) + return retval; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + ifxusb_dev_core_init(&_pcd->core_if,&ifxusb_module_params); + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + ifxusb_disable_global_interrupts( &_pcd->core_if); + + /* The driver is now initialized and need to be registered into + Linux USB Gadget sub-system + */ + retval = ifxpcd_init(); + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + + if (retval != 0) + { + IFX_ERROR("_pcd_init failed\n"); + return retval; + } + //ifxusb_enable_global_interrupts( _pcd->core_if ); // this should be done at gadget bind or start + return 0; + } +#endif //__IS_DEVICE__ + + + +/*! + \brief This function is called by module management in 2.6 kernel or by ifxusb_driver_init with 2.4 kernel + It is to probe and setup IFXUSB core(s). +*/ +static int ifxusb_driver_probe(struct platform_device *_dev) +{ + int retval = 0; + int *pins = _dev->dev.platform_data; + if (ltq_is_vr9()) { + gpio_request(6, "id1"); + gpio_request(9, "id2"); + gpio_direction_input(6); + gpio_direction_input(9); + } + if (pins) { + if (pins[0]) { + gpio_request(pins[0], "vbus1"); + gpio_direction_output(pins[0], 1); + } + if (pins[1] && ltq_is_vr9()) { + gpio_request(pins[1], "vbus2"); + gpio_direction_output(pins[1], 1); + } + } + // Parsing and store the parameters + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + parse_parms(); + + #ifdef __IS_HOST__ + #if defined(__IS_DUAL__) + memset(&ifxusb_hcd_1, 0, sizeof(ifxhcd_hcd_t)); + memset(&ifxusb_hcd_2, 0, sizeof(ifxhcd_hcd_t)); + + ifxusb_hcd_1.core_if.core_no=0; + ifxusb_hcd_2.core_if.core_no=1; + ifxusb_hcd_1.core_if.core_name=(char *)ifxusb_hcd_name_1; + ifxusb_hcd_2.core_if.core_name=(char *)ifxusb_hcd_name_2; + + ifxusb_hcd_1.dev=&_dev->dev; + ifxusb_hcd_2.dev=&_dev->dev; + + retval = ifxusb_driver_probe_h(&ifxusb_hcd_1, + IFX_USB0_IR, + IFXUSB1_IOMEM_BASE, + IFXUSB1_FIFOMEM_BASE, + IFXUSB1_FIFODBG_BASE + ); + if(retval) + goto ifxusb_driver_probe_fail; + + retval = ifxusb_driver_probe_h(&ifxusb_hcd_2, + IFX_USB1_IR, + IFXUSB2_IOMEM_BASE, + IFXUSB2_FIFOMEM_BASE, + IFXUSB2_FIFODBG_BASE + ); + if(retval) + goto ifxusb_driver_probe_fail; + + #elif defined(__IS_FIRST__) + memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t)); + + ifxusb_hcd.core_if.core_no=0; + ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name; + + ifxusb_hcd.dev=&_dev->dev; + + retval = ifxusb_driver_probe_h(&ifxusb_hcd, + IFX_USB0_IR, + IFXUSB1_IOMEM_BASE, + IFXUSB1_FIFOMEM_BASE, + IFXUSB1_FIFODBG_BASE + ); + if(retval) + goto ifxusb_driver_probe_fail; + + #elif defined(__IS_SECOND__) + memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t)); + + ifxusb_hcd.core_if.core_no=1; + ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name; + + ifxusb_hcd.dev=&_dev->dev; + + retval = ifxusb_driver_probe_h(&ifxusb_hcd, + IFX_USB1_IR, + IFXUSB2_IOMEM_BASE, + IFXUSB2_FIFOMEM_BASE, + IFXUSB2_FIFODBG_BASE + ); + if(retval) + goto ifxusb_driver_probe_fail; + + #else + memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t)); + + ifxusb_hcd.core_if.core_no=0; + ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name; + + ifxusb_hcd.dev=&_dev->dev; + + retval = ifxusb_driver_probe_h(&ifxusb_hcd, + IFXUSB_IRQ, + IFXUSB_IOMEM_BASE, + IFXUSB_FIFOMEM_BASE, + IFXUSB_FIFODBG_BASE + ); + if(retval) + goto ifxusb_driver_probe_fail; + #endif + + #if defined(__DO_OC_INT__) + IFXUSB_DEBUGPL( DBG_CIL, "registering (overcurrent) handler for irq%d\n", IFXUSB_OC_IRQ); + #if defined(__IS_DUAL__) + request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq, +// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd_1); + IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd_1); + oc_int_id=&ifxusb_hcd_1; + #else + request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq, +// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd); + IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd); + oc_int_id=&ifxusb_hcd; + #endif + oc_int_installed=1; + + #if defined(__DO_OC_INT_ENABLE__) + ifxusb_oc_int_on(); + #endif + #endif + + #endif + + #ifdef __IS_DEVICE__ + memset(&ifxusb_pcd, 0, sizeof(ifxpcd_pcd_t)); + ifxusb_pcd.core_if.core_name=(char *)&ifxusb_pcd_name[0]; + + ifxusb_pcd.dev=&_dev->dev; + + #if defined(__IS_FIRST__) + ifxusb_pcd.core_if.core_no=0; + retval = ifxusb_driver_probe_d(&ifxusb_pcd, + IFXUSB1_IRQ, + IFXUSB1_IOMEM_BASE, + IFXUSB1_FIFOMEM_BASE, + IFXUSB1_FIFODBG_BASE + ); + #elif defined(__IS_SECOND__) + ifxusb_pcd.core_if.core_no=1; + retval = ifxusb_driver_probe_d(&ifxusb_pcd, + IFXUSB2_IRQ, + IFXUSB2_IOMEM_BASE, + IFXUSB2_FIFOMEM_BASE, + IFXUSB2_FIFODBG_BASE + ); + #else + ifxusb_pcd.core_if.core_no=0; + retval = ifxusb_driver_probe_d(&ifxusb_pcd, + IFXUSB_IRQ, + IFXUSB_IOMEM_BASE, + IFXUSB_FIFOMEM_BASE, + IFXUSB_FIFODBG_BASE + ); + #endif + if(retval) + goto ifxusb_driver_probe_fail; + #endif + + ifxusb_attr_create(&_dev->dev); + + return 0; + +ifxusb_driver_probe_fail: + ifxusb_driver_remove(_dev); + return retval; +} + + + +/*! + \brief This function is called when the ifxusb_driver is installed with the insmod command. +*/ + + +static struct platform_driver ifxusb_driver = { + .driver = { + .name = ifxusb_driver_name, + .owner = THIS_MODULE, + }, + .probe = ifxusb_driver_probe, + .remove = ifxusb_driver_remove, +}; + +int __init ifxusb_driver_init(void) +{ + int retval = 0; + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION); + + retval = platform_driver_register(&ifxusb_driver); + + if (retval < 0) { + IFX_ERROR("%s retval=%d\n", __func__, retval); + return retval; + } + return retval; +} + +#if 0 // 2.4 + int __init ifxusb_driver_init(void) + { + int retval = 0; + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION); + retval = ifxusb_driver_probe(); + + if (retval < 0) { + IFX_ERROR("%s retval=%d\n", __func__, retval); + return retval; + } + + return retval; + } +#endif + +module_init(ifxusb_driver_init); + + +/*! + \brief This function is called when the driver is removed from the kernel + with the rmmod command. The driver unregisters itself with its bus + driver. +*/ + +void __exit ifxusb_driver_cleanup(void) +{ + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + + platform_driver_unregister(&ifxusb_driver); + + IFX_PRINT("%s module removed\n", ifxusb_driver_name); +} +#if 0 + void __exit ifxusb_driver_cleanup(void) + { + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + ifxusb_driver_remove(); + IFX_PRINT("%s module removed\n", ifxusb_driver_name); + } +#endif +module_exit(ifxusb_driver_cleanup); + + + +MODULE_DESCRIPTION(USB_DRIVER_DESC); +MODULE_AUTHOR("Infineon"); +MODULE_LICENSE("GPL"); + + + +// Parameters set when loaded +//static long dbg_lvl =0xFFFFFFFF; +static long dbg_lvl =0; +static short dma_burst_size =-1; +static short speed =-1; +static long data_fifo_size =-1; +#ifdef __IS_DEVICE__ + static long rx_fifo_size =-1; + #ifdef __DED_FIFO__ + static long tx_fifo_size_00 =-1; + static long tx_fifo_size_01 =-1; + static long tx_fifo_size_02 =-1; + static long tx_fifo_size_03 =-1; + static long tx_fifo_size_04 =-1; + static long tx_fifo_size_05 =-1; + static long tx_fifo_size_06 =-1; + static long tx_fifo_size_07 =-1; + static long tx_fifo_size_08 =-1; + static long tx_fifo_size_09 =-1; + static long tx_fifo_size_10 =-1; + static long tx_fifo_size_11 =-1; + static long tx_fifo_size_12 =-1; + static long tx_fifo_size_13 =-1; + static long tx_fifo_size_14 =-1; + static long tx_fifo_size_15 =-1; + static short thr_ctl=-1; + static long tx_thr_length =-1; + static long rx_thr_length =-1; + #else + static long nperio_tx_fifo_size =-1; + static long perio_tx_fifo_size_01 =-1; + static long perio_tx_fifo_size_02 =-1; + static long perio_tx_fifo_size_03 =-1; + static long perio_tx_fifo_size_04 =-1; + static long perio_tx_fifo_size_05 =-1; + static long perio_tx_fifo_size_06 =-1; + static long perio_tx_fifo_size_07 =-1; + static long perio_tx_fifo_size_08 =-1; + static long perio_tx_fifo_size_09 =-1; + static long perio_tx_fifo_size_10 =-1; + static long perio_tx_fifo_size_11 =-1; + static long perio_tx_fifo_size_12 =-1; + static long perio_tx_fifo_size_13 =-1; + static long perio_tx_fifo_size_14 =-1; + static long perio_tx_fifo_size_15 =-1; + #endif + static short dev_endpoints =-1; +#endif + +#ifdef __IS_HOST__ + static long rx_fifo_size =-1; + static long nperio_tx_fifo_size =-1; + static long perio_tx_fifo_size =-1; + static short host_channels =-1; +#endif + +static long max_transfer_size =-1; +static long max_packet_count =-1; +static long phy_utmi_width =-1; +static long turn_around_time_hs =-1; +static long turn_around_time_fs =-1; +static long timeout_cal_hs =-1; +static long timeout_cal_fs =-1; + +/*! + \brief Parsing the parameters taken when module load +*/ +static void parse_parms(void) +{ + + IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ ); + #ifdef __IS_HOST__ + h_dbg_lvl=dbg_lvl; + #endif + #ifdef __IS_DEVICE__ + d_dbg_lvl=dbg_lvl; + #endif + + switch(dma_burst_size) + { + case 0: + case 1: + case 4: + case 8: + case 16: + ifxusb_module_params.dma_burst_size=dma_burst_size; + break; + default: + ifxusb_module_params.dma_burst_size=default_param_dma_burst_size; + } + + if(speed==0 || speed==1) + ifxusb_module_params.speed=speed; + else + ifxusb_module_params.speed=default_param_speed; + + if(max_transfer_size>=2048 && max_transfer_size<=65535) + ifxusb_module_params.max_transfer_size=max_transfer_size; + else + ifxusb_module_params.max_transfer_size=default_param_max_transfer_size; + + if(max_packet_count>=15 && max_packet_count<=511) + ifxusb_module_params.max_packet_count=max_packet_count; + else + ifxusb_module_params.max_packet_count=default_param_max_packet_count; + + switch(phy_utmi_width) + { + case 8: + case 16: + ifxusb_module_params.phy_utmi_width=phy_utmi_width; + break; + default: + ifxusb_module_params.phy_utmi_width=default_param_phy_utmi_width; + } + + if(turn_around_time_hs>=0 && turn_around_time_hs<=7) + ifxusb_module_params.turn_around_time_hs=turn_around_time_hs; + else + ifxusb_module_params.turn_around_time_hs=default_param_turn_around_time_hs; + + if(turn_around_time_fs>=0 && turn_around_time_fs<=7) + ifxusb_module_params.turn_around_time_fs=turn_around_time_fs; + else + ifxusb_module_params.turn_around_time_fs=default_param_turn_around_time_fs; + + if(timeout_cal_hs>=0 && timeout_cal_hs<=7) + ifxusb_module_params.timeout_cal_hs=timeout_cal_hs; + else + ifxusb_module_params.timeout_cal_hs=default_param_timeout_cal_hs; + + if(timeout_cal_fs>=0 && timeout_cal_fs<=7) + ifxusb_module_params.timeout_cal_fs=timeout_cal_fs; + else + ifxusb_module_params.timeout_cal_fs=default_param_timeout_cal_fs; + + if(data_fifo_size>=32 && data_fifo_size<=32768) + ifxusb_module_params.data_fifo_size=data_fifo_size; + else + ifxusb_module_params.data_fifo_size=default_param_data_fifo_size; + + #ifdef __IS_HOST__ + if(host_channels>=1 && host_channels<=16) + ifxusb_module_params.host_channels=host_channels; + else + ifxusb_module_params.host_channels=default_param_host_channels; + + if(rx_fifo_size>=16 && rx_fifo_size<=32768) + ifxusb_module_params.rx_fifo_size=rx_fifo_size; + else + ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size; + + if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768) + ifxusb_module_params.nperio_tx_fifo_size=nperio_tx_fifo_size; + else + ifxusb_module_params.nperio_tx_fifo_size=default_param_nperio_tx_fifo_size; + + if(perio_tx_fifo_size>=16 && perio_tx_fifo_size<=32768) + ifxusb_module_params.perio_tx_fifo_size=perio_tx_fifo_size; + else + ifxusb_module_params.perio_tx_fifo_size=default_param_perio_tx_fifo_size; + #endif //__IS_HOST__ + + #ifdef __IS_DEVICE__ + if(rx_fifo_size>=16 && rx_fifo_size<=32768) + ifxusb_module_params.rx_fifo_size=rx_fifo_size; + else + ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size; + #ifdef __DED_FIFO__ + if(tx_fifo_size_00>=16 && tx_fifo_size_00<=32768) + ifxusb_module_params.tx_fifo_size[ 0]=tx_fifo_size_00; + else + ifxusb_module_params.tx_fifo_size[ 0]=default_param_tx_fifo_size_00; + if(tx_fifo_size_01>=0 && tx_fifo_size_01<=32768) + ifxusb_module_params.tx_fifo_size[ 1]=tx_fifo_size_01; + else + ifxusb_module_params.tx_fifo_size[ 1]=default_param_tx_fifo_size_01; + if(tx_fifo_size_02>=0 && tx_fifo_size_02<=32768) + ifxusb_module_params.tx_fifo_size[ 2]=tx_fifo_size_02; + else + ifxusb_module_params.tx_fifo_size[ 2]=default_param_tx_fifo_size_02; + if(tx_fifo_size_03>=0 && tx_fifo_size_03<=32768) + ifxusb_module_params.tx_fifo_size[ 3]=tx_fifo_size_03; + else + ifxusb_module_params.tx_fifo_size[ 3]=default_param_tx_fifo_size_03; + if(tx_fifo_size_04>=0 && tx_fifo_size_04<=32768) + ifxusb_module_params.tx_fifo_size[ 4]=tx_fifo_size_04; + else + ifxusb_module_params.tx_fifo_size[ 4]=default_param_tx_fifo_size_04; + if(tx_fifo_size_05>=0 && tx_fifo_size_05<=32768) + ifxusb_module_params.tx_fifo_size[ 5]=tx_fifo_size_05; + else + ifxusb_module_params.tx_fifo_size[ 5]=default_param_tx_fifo_size_05; + if(tx_fifo_size_06>=0 && tx_fifo_size_06<=32768) + ifxusb_module_params.tx_fifo_size[ 6]=tx_fifo_size_06; + else + ifxusb_module_params.tx_fifo_size[ 6]=default_param_tx_fifo_size_06; + if(tx_fifo_size_07>=0 && tx_fifo_size_07<=32768) + ifxusb_module_params.tx_fifo_size[ 7]=tx_fifo_size_07; + else + ifxusb_module_params.tx_fifo_size[ 7]=default_param_tx_fifo_size_07; + if(tx_fifo_size_08>=0 && tx_fifo_size_08<=32768) + ifxusb_module_params.tx_fifo_size[ 8]=tx_fifo_size_08; + else + ifxusb_module_params.tx_fifo_size[ 8]=default_param_tx_fifo_size_08; + if(tx_fifo_size_09>=0 && tx_fifo_size_09<=32768) + ifxusb_module_params.tx_fifo_size[ 9]=tx_fifo_size_09; + else + ifxusb_module_params.tx_fifo_size[ 9]=default_param_tx_fifo_size_09; + if(tx_fifo_size_10>=0 && tx_fifo_size_10<=32768) + ifxusb_module_params.tx_fifo_size[10]=tx_fifo_size_10; + else + ifxusb_module_params.tx_fifo_size[10]=default_param_tx_fifo_size_10; + if(tx_fifo_size_11>=0 && tx_fifo_size_11<=32768) + ifxusb_module_params.tx_fifo_size[11]=tx_fifo_size_11; + else + ifxusb_module_params.tx_fifo_size[11]=default_param_tx_fifo_size_11; + if(tx_fifo_size_12>=0 && tx_fifo_size_12<=32768) + ifxusb_module_params.tx_fifo_size[12]=tx_fifo_size_12; + else + ifxusb_module_params.tx_fifo_size[12]=default_param_tx_fifo_size_12; + if(tx_fifo_size_13>=0 && tx_fifo_size_13<=32768) + ifxusb_module_params.tx_fifo_size[13]=tx_fifo_size_13; + else + ifxusb_module_params.tx_fifo_size[13]=default_param_tx_fifo_size_13; + if(tx_fifo_size_14>=0 && tx_fifo_size_14<=32768) + ifxusb_module_params.tx_fifo_size[14]=tx_fifo_size_14; + else + ifxusb_module_params.tx_fifo_size[14]=default_param_tx_fifo_size_14; + if(tx_fifo_size_15>=0 && tx_fifo_size_15<=32768) + ifxusb_module_params.tx_fifo_size[15]=tx_fifo_size_15; + else + ifxusb_module_params.tx_fifo_size[15]=default_param_tx_fifo_size_15; + if(thr_ctl==0 || thr_ctl==1) + ifxusb_module_params.thr_ctl=thr_ctl; + else + ifxusb_module_params.thr_ctl=default_param_thr_ctl; + if(tx_thr_length>=16 && tx_thr_length<=511) + ifxusb_module_params.tx_thr_length=tx_thr_length; + else + ifxusb_module_params.tx_thr_length=default_param_tx_thr_length; + if(rx_thr_length>=16 && rx_thr_length<=511) + ifxusb_module_params.rx_thr_length=rx_thr_length; + else + ifxusb_module_params.rx_thr_length=default_param_rx_thr_length; + #else //__DED_FIFO__ + if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768) + ifxusb_module_params.tx_fifo_size[ 0]=nperio_tx_fifo_size; + else + ifxusb_module_params.tx_fifo_size[ 0]=default_param_nperio_tx_fifo_size; + if(perio_tx_fifo_size_01>=0 && perio_tx_fifo_size_01<=32768) + ifxusb_module_params.tx_fifo_size[ 1]=perio_tx_fifo_size_01; + else + ifxusb_module_params.tx_fifo_size[ 1]=default_param_perio_tx_fifo_size_01; + if(perio_tx_fifo_size_02>=0 && perio_tx_fifo_size_02<=32768) + ifxusb_module_params.tx_fifo_size[ 2]=perio_tx_fifo_size_02; + else + ifxusb_module_params.tx_fifo_size[ 2]=default_param_perio_tx_fifo_size_02; + if(perio_tx_fifo_size_03>=0 && perio_tx_fifo_size_03<=32768) + ifxusb_module_params.tx_fifo_size[ 3]=perio_tx_fifo_size_03; + else + ifxusb_module_params.tx_fifo_size[ 3]=default_param_perio_tx_fifo_size_03; + if(perio_tx_fifo_size_04>=0 && perio_tx_fifo_size_04<=32768) + ifxusb_module_params.tx_fifo_size[ 4]=perio_tx_fifo_size_04; + else + ifxusb_module_params.tx_fifo_size[ 4]=default_param_perio_tx_fifo_size_04; + if(perio_tx_fifo_size_05>=0 && perio_tx_fifo_size_05<=32768) + ifxusb_module_params.tx_fifo_size[ 5]=perio_tx_fifo_size_05; + else + ifxusb_module_params.tx_fifo_size[ 5]=default_param_perio_tx_fifo_size_05; + if(perio_tx_fifo_size_06>=0 && perio_tx_fifo_size_06<=32768) + ifxusb_module_params.tx_fifo_size[ 6]=perio_tx_fifo_size_06; + else + ifxusb_module_params.tx_fifo_size[ 6]=default_param_perio_tx_fifo_size_06; + if(perio_tx_fifo_size_07>=0 && perio_tx_fifo_size_07<=32768) + ifxusb_module_params.tx_fifo_size[ 7]=perio_tx_fifo_size_07; + else + ifxusb_module_params.tx_fifo_size[ 7]=default_param_perio_tx_fifo_size_07; + if(perio_tx_fifo_size_08>=0 && perio_tx_fifo_size_08<=32768) + ifxusb_module_params.tx_fifo_size[ 8]=perio_tx_fifo_size_08; + else + ifxusb_module_params.tx_fifo_size[ 8]=default_param_perio_tx_fifo_size_08; + if(perio_tx_fifo_size_09>=0 && perio_tx_fifo_size_09<=32768) + ifxusb_module_params.tx_fifo_size[ 9]=perio_tx_fifo_size_09; + else + ifxusb_module_params.tx_fifo_size[ 9]=default_param_perio_tx_fifo_size_09; + if(perio_tx_fifo_size_10>=0 && perio_tx_fifo_size_10<=32768) + ifxusb_module_params.tx_fifo_size[10]=perio_tx_fifo_size_10; + else + ifxusb_module_params.tx_fifo_size[10]=default_param_perio_tx_fifo_size_10; + if(perio_tx_fifo_size_11>=0 && perio_tx_fifo_size_11<=32768) + ifxusb_module_params.tx_fifo_size[11]=perio_tx_fifo_size_11; + else + ifxusb_module_params.tx_fifo_size[11]=default_param_perio_tx_fifo_size_11; + if(perio_tx_fifo_size_12>=0 && perio_tx_fifo_size_12<=32768) + ifxusb_module_params.tx_fifo_size[12]=perio_tx_fifo_size_12; + else + ifxusb_module_params.tx_fifo_size[12]=default_param_perio_tx_fifo_size_12; + if(perio_tx_fifo_size_13>=0 && perio_tx_fifo_size_13<=32768) + ifxusb_module_params.tx_fifo_size[13]=perio_tx_fifo_size_13; + else + ifxusb_module_params.tx_fifo_size[13]=default_param_perio_tx_fifo_size_13; + if(perio_tx_fifo_size_14>=0 && perio_tx_fifo_size_14<=32768) + ifxusb_module_params.tx_fifo_size[14]=perio_tx_fifo_size_14; + else + ifxusb_module_params.tx_fifo_size[14]=default_param_perio_tx_fifo_size_14; + if(perio_tx_fifo_size_15>=0 && perio_tx_fifo_size_15<=32768) + ifxusb_module_params.tx_fifo_size[15]=perio_tx_fifo_size_15; + else + ifxusb_module_params.tx_fifo_size[15]=default_param_perio_tx_fifo_size_15; + #endif //__DED_FIFO__ + #endif //__IS_DEVICE__ +} + + + + + + + +module_param(dbg_lvl, long, 0444); +MODULE_PARM_DESC(dbg_lvl, "Debug level."); + +module_param(dma_burst_size, short, 0444); +MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 0, 1, 4, 8, 16"); + +module_param(speed, short, 0444); +MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); + +module_param(data_fifo_size, long, 0444); +MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768"); + +#ifdef __IS_DEVICE__ + module_param(rx_fifo_size, long, 0444); + MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); + + #ifdef __DED_FIFO__ + module_param(tx_fifo_size_00, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_00, "Number of words in the Tx FIFO #00 16-32768"); + module_param(tx_fifo_size_01, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_01, "Number of words in the Tx FIFO #01 0-32768"); + module_param(tx_fifo_size_02, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_02, "Number of words in the Tx FIFO #02 0-32768"); + module_param(tx_fifo_size_03, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_03, "Number of words in the Tx FIFO #03 0-32768"); + module_param(tx_fifo_size_04, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_04, "Number of words in the Tx FIFO #04 0-32768"); + module_param(tx_fifo_size_05, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_05, "Number of words in the Tx FIFO #05 0-32768"); + module_param(tx_fifo_size_06, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_06, "Number of words in the Tx FIFO #06 0-32768"); + module_param(tx_fifo_size_07, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_07, "Number of words in the Tx FIFO #07 0-32768"); + module_param(tx_fifo_size_08, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_08, "Number of words in the Tx FIFO #08 0-32768"); + module_param(tx_fifo_size_09, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_09, "Number of words in the Tx FIFO #09 0-32768"); + module_param(tx_fifo_size_10, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_10, "Number of words in the Tx FIFO #10 0-32768"); + module_param(tx_fifo_size_11, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_11, "Number of words in the Tx FIFO #11 0-32768"); + module_param(tx_fifo_size_12, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_12, "Number of words in the Tx FIFO #12 0-32768"); + module_param(tx_fifo_size_13, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_13, "Number of words in the Tx FIFO #13 0-32768"); + module_param(tx_fifo_size_14, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_14, "Number of words in the Tx FIFO #14 0-32768"); + module_param(tx_fifo_size_15, long, 0444); + MODULE_PARM_DESC(tx_fifo_size_15, "Number of words in the Tx FIFO #15 0-32768"); + + module_param(thr_ctl, short, 0444); + MODULE_PARM_DESC(thr_ctl, "0=Without 1=With Theshold Ctrl"); + + module_param(tx_thr_length, long, 0444); + MODULE_PARM_DESC(tx_thr_length, "TX Threshold length"); + + module_param(rx_thr_length, long, 0444); + MODULE_PARM_DESC(rx_thr_length, "RX Threshold length"); + + #else + module_param(nperio_tx_fifo_size, long, 0444); + MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); + + module_param(perio_tx_fifo_size_01, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_01, "Number of words in the periodic Tx FIFO #01 0-32768"); + module_param(perio_tx_fifo_size_02, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_02, "Number of words in the periodic Tx FIFO #02 0-32768"); + module_param(perio_tx_fifo_size_03, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_03, "Number of words in the periodic Tx FIFO #03 0-32768"); + module_param(perio_tx_fifo_size_04, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_04, "Number of words in the periodic Tx FIFO #04 0-32768"); + module_param(perio_tx_fifo_size_05, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_05, "Number of words in the periodic Tx FIFO #05 0-32768"); + module_param(perio_tx_fifo_size_06, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_06, "Number of words in the periodic Tx FIFO #06 0-32768"); + module_param(perio_tx_fifo_size_07, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_07, "Number of words in the periodic Tx FIFO #07 0-32768"); + module_param(perio_tx_fifo_size_08, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_08, "Number of words in the periodic Tx FIFO #08 0-32768"); + module_param(perio_tx_fifo_size_09, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_09, "Number of words in the periodic Tx FIFO #09 0-32768"); + module_param(perio_tx_fifo_size_10, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO #10 0-32768"); + module_param(perio_tx_fifo_size_11, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO #11 0-32768"); + module_param(perio_tx_fifo_size_12, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO #12 0-32768"); + module_param(perio_tx_fifo_size_13, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO #13 0-32768"); + module_param(perio_tx_fifo_size_14, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO #14 0-32768"); + module_param(perio_tx_fifo_size_15, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO #15 0-32768"); + #endif//__DED_FIFO__ + module_param(dev_endpoints, short, 0444); + MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15"); +#endif + +#ifdef __IS_HOST__ + module_param(rx_fifo_size, long, 0444); + MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); + + module_param(nperio_tx_fifo_size, long, 0444); + MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); + + module_param(perio_tx_fifo_size, long, 0444); + MODULE_PARM_DESC(perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768"); + + module_param(host_channels, short, 0444); + MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16"); +#endif + +module_param(max_transfer_size, long, 0444); +MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535"); + +module_param(max_packet_count, long, 0444); +MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511"); + +module_param(phy_utmi_width, long, 0444); +MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); + +module_param(turn_around_time_hs, long, 0444); +MODULE_PARM_DESC(turn_around_time_hs, "Turn-Around time for HS"); + +module_param(turn_around_time_fs, long, 0444); +MODULE_PARM_DESC(turn_around_time_fs, "Turn-Around time for FS"); + +module_param(timeout_cal_hs, long, 0444); +MODULE_PARM_DESC(timeout_cal_hs, "Timeout Cal for HS"); + +module_param(timeout_cal_fs, long, 0444); +MODULE_PARM_DESC(timeout_cal_fs, "Timeout Cal for FS"); + + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_plat.h b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_plat.h new file mode 100644 index 0000000000..a50294fdcf --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_plat.h @@ -0,0 +1,1018 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_plat.h + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : This file contains the Platform Specific constants, interfaces + ** (functions and macros). + ** FUNCTIONS : + ** COMPILER : gcc + ** REFERENCE : IFX hardware ref handbook for each plateforms + ** COPYRIGHT : + ** Version Control Section ** + ** $Author$ + ** $Date$ + ** $Revisions$ + ** $Log$ Revision history + *****************************************************************************/ + + +/*! + \defgroup IFXUSB_PLATEFORM_DEFINITION Platform Specific constants, interfaces (functions and macros). + \ingroup IFXUSB_DRIVER_V3 + \brief Maintain plateform specific definitions and macros in this file. + Each plateform has its own definition zone. + */ + +/*! + \defgroup IFXUSB_PLATEFORM_MEM_ADDR Definition of memory address and size and default parameters + \ingroup IFXUSB_PLATEFORM_DEFINITION + */ + +/*! + \defgroup IFXUSB_DBG_ROUTINE Routines for debug message + \ingroup IFXUSB_PLATEFORM_DEFINITION + */ + + +/*! \file ifxusb_plat.h + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the Platform Specific constants, interfaces (functions and macros). +*/ + +#if !defined(__IFXUSB_PLAT_H__) +#define __IFXUSB_PLAT_H__ + + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <asm/io.h> + + +#define IFXUSB_IOMEM_SIZE 0x00001000 +#define IFXUSB_FIFOMEM_SIZE 0x00010000 +#define IFXUSB_FIFODBG_SIZE 0x00020000 + + + +/*! + \addtogroup IFXUSB_PLATEFORM_MEM_ADDR + */ +/*@{*/ +#if defined(__UEIP__) + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) +// #define IFXUSB_IRQ 54 + #define IFXUSB_IOMEM_BASE 0x1e101000 + #define IFXUSB_FIFOMEM_BASE 0x1e120000 + #define IFXUSB_FIFODBG_BASE 0x1e140000 +// #define IFXUSB_OC_IRQ 151 + + #ifndef DANUBE_RCU_BASE_ADDR + #define DANUBE_RCU_BASE_ADDR (0xBF203000) + #endif + + #ifndef DANUBE_CGU + #define DANUBE_CGU (0xBF103000) + #endif + #ifndef DANUBE_CGU_IFCCR + #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018)) + #endif + #ifndef DANUBE_PMU + #define DANUBE_PMU (KSEG1+0x1F102000) + #endif + #ifndef DANUBE_PMU_PWDCR + #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C)) + #endif + + #ifndef DANUBE_GPIO_P0_OUT + #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10) + #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18) + #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define DANUBE_GPIO_P0_OD (0xBF103000+0x24) + #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30) + #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40) + #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48) + #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define DANUBE_GPIO_P1_OD (0xBF103000+0x54) + #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18)) + #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10)) + #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end + + #define default_param_dma_burst_size 4 + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 4 + #define default_param_turn_around_time_fs 4 + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 640 + #define default_param_nperio_tx_fifo_size 640 + #define default_param_perio_tx_fifo_size 768 + #endif //__IS_HOST__ + + #ifdef __IS_DEVICE__ + #ifdef __DED_INTR__ + #define default_param_rx_fifo_size 1024 + #define default_param_nperio_tx_fifo_size 1016 + #define default_param_perio_tx_fifo_size_01 8 + #else + #define default_param_rx_fifo_size 1024 + #define default_param_nperio_tx_fifo_size 1024 + #define default_param_perio_tx_fifo_size_01 0 + #endif + #define default_param_perio_tx_fifo_size_02 0 + #define default_param_perio_tx_fifo_size_03 0 + #define default_param_perio_tx_fifo_size_04 0 + #define default_param_perio_tx_fifo_size_05 0 + #define default_param_perio_tx_fifo_size_06 0 + #define default_param_perio_tx_fifo_size_07 0 + #define default_param_perio_tx_fifo_size_08 0 + #define default_param_perio_tx_fifo_size_09 0 + #define default_param_perio_tx_fifo_size_10 0 + #define default_param_perio_tx_fifo_size_11 0 + #define default_param_perio_tx_fifo_size_12 0 + #define default_param_perio_tx_fifo_size_13 0 + #define default_param_perio_tx_fifo_size_14 0 + #define default_param_perio_tx_fifo_size_15 0 + #endif //__IS_DEVICE__ + + #elif defined(__IS_AMAZON_SE__) + //#include <asm/amazon_se/amazon_se.h> + //#include <asm/amazon_se/irq.h> + +// #define IFXUSB_IRQ 31 + #define IFXUSB_IOMEM_BASE 0x1e101000 + #define IFXUSB_FIFOMEM_BASE 0x1e120000 + #define IFXUSB_FIFODBG_BASE 0x1e140000 +// #define IFXUSB_OC_IRQ 20 + + #ifndef AMAZON_SE_RCU_BASE_ADDR + #define AMAZON_SE_RCU_BASE_ADDR (0xBF203000) + #endif + #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18)) + #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10)) + #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end + + #ifndef AMAZON_SE_GPIO_P0_OUT + #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10) + #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18) + #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24) + #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30) + #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40) + #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48) + #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54) + #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + #ifndef AMAZON_SE_CGU + #define AMAZON_SE_CGU (0xBF103000) + #endif + #ifndef AMAZON_SE_CGU_IFCCR + #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018)) + #endif + #ifndef AMAZON_SE_PMU + #define AMAZON_SE_PMU (KSEG1+0x1F102000) + #endif + #ifndef AMAZON_SE_PMU_PWDCR + #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C)) + #endif + + #define default_param_dma_burst_size 4 + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 4 //(NoChange) + #define default_param_turn_around_time_fs 4 //(NoChange) + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 240 + #define default_param_nperio_tx_fifo_size 240 + #define default_param_perio_tx_fifo_size 32 + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ + #ifdef __DED_INTR__ + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 248 + #define default_param_perio_tx_fifo_size_01 8 + #else + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 256 + #define default_param_perio_tx_fifo_size_01 0 + #endif + #define default_param_perio_tx_fifo_size_02 0 + #define default_param_perio_tx_fifo_size_03 0 + #define default_param_perio_tx_fifo_size_04 0 + #define default_param_perio_tx_fifo_size_05 0 + #define default_param_perio_tx_fifo_size_06 0 + #define default_param_perio_tx_fifo_size_07 0 + #define default_param_perio_tx_fifo_size_08 0 + #define default_param_perio_tx_fifo_size_09 0 + #define default_param_perio_tx_fifo_size_10 0 + #define default_param_perio_tx_fifo_size_11 0 + #define default_param_perio_tx_fifo_size_12 0 + #define default_param_perio_tx_fifo_size_13 0 + #define default_param_perio_tx_fifo_size_14 0 + #define default_param_perio_tx_fifo_size_15 0 + #endif //__IS_DEVICE__ + + #elif defined(__IS_AR9__) +// #define IFXUSB1_IRQ 54 + #define IFXUSB1_IOMEM_BASE 0x1E101000 + #define IFXUSB1_FIFOMEM_BASE 0x1E120000 + #define IFXUSB1_FIFODBG_BASE 0x1E140000 + +// #define IFXUSB2_IRQ 83 + #define IFXUSB2_IOMEM_BASE 0x1E106000 + #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000 + #define IFXUSB2_FIFODBG_BASE 0x1E1C0000 + +// #define IFXUSB_OC_IRQ 60 + + #ifndef AR9_RCU_BASE_ADDR + #define AR9_RCU_BASE_ADDR (0xBF203000) + #endif + + #ifndef AR9_CGU + #define AR9_CGU (0xBF103000) + #endif + #ifndef AR9_CGU_IFCCR + #define AR9_CGU_IFCCR ((volatile unsigned long *)(AR9_CGU+ 0x0018)) + #endif + + #ifndef AR9_PMU + #define AR9_PMU (KSEG1+0x1F102000) + #endif + #ifndef AR9_PMU_PWDCR + #define AR9_PMU_PWDCR ((volatile unsigned long *)(AR9_PMU+0x001C)) + #endif + + #ifndef AR9_GPIO_P0_OUT + #define AR9_GPIO_P0_OUT (0xBF103000+0x10) + #define AR9_GPIO_P0_DIR (0xBF103000+0x18) + #define AR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define AR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define AR9_GPIO_P0_OD (0xBF103000+0x24) + #define AR9_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define AR9_GPIO_P0_PUDEN (0xBF103000+0x30) + #define AR9_GPIO_P1_OUT (0xBF103000+0x40) + #define AR9_GPIO_P1_DIR (0xBF103000+0x48) + #define AR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define AR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define AR9_GPIO_P1_OD (0xBF103000+0x54) + #define AR9_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define AR9_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + #define AR9_RCU_USB1CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x18)) + #define AR9_RCU_USB2CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x34)) + #define AR9_RCU_USBRESET ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x10)) + #define AR9_USBCFG_ARB 7 // + #define AR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define AR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define AR9_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end + + #define default_param_dma_burst_size 4 + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 4 //(NoChange) + #define default_param_turn_around_time_fs 4 //(NoChange) + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 240 + #define default_param_nperio_tx_fifo_size 240 + #define default_param_perio_tx_fifo_size 32 + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ + #ifdef __DED_INTR__ + #define default_param_rx_fifo_size 256 +// #define default_param_nperio_tx_fifo_size 248 +// #define default_param_perio_tx_fifo_size_01 8 + #define default_param_nperio_tx_fifo_size 252 + #define default_param_perio_tx_fifo_size_01 4 + #else + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 256 + #define default_param_perio_tx_fifo_size_01 0 + #endif + #define default_param_perio_tx_fifo_size_02 0 + #define default_param_perio_tx_fifo_size_03 0 + #define default_param_perio_tx_fifo_size_04 0 + #define default_param_perio_tx_fifo_size_05 0 + #define default_param_perio_tx_fifo_size_06 0 + #define default_param_perio_tx_fifo_size_07 0 + #define default_param_perio_tx_fifo_size_08 0 + #define default_param_perio_tx_fifo_size_09 0 + #define default_param_perio_tx_fifo_size_10 0 + #define default_param_perio_tx_fifo_size_11 0 + #define default_param_perio_tx_fifo_size_12 0 + #define default_param_perio_tx_fifo_size_13 0 + #define default_param_perio_tx_fifo_size_14 0 + #define default_param_perio_tx_fifo_size_15 0 + #endif //__IS_DEVICE__ + + #elif defined(__IS_VR9__) +// #define IFXUSB1_IRQ 54 + #define IFXUSB1_IOMEM_BASE 0x1E101000 + #define IFXUSB1_FIFOMEM_BASE 0x1E120000 + #define IFXUSB1_FIFODBG_BASE 0x1E140000 + +// #define IFXUSB2_IRQ 83 + #define IFXUSB2_IOMEM_BASE 0x1E106000 + #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000 + #define IFXUSB2_FIFODBG_BASE 0x1E1C0000 +// #define IFXUSB_OC_IRQ 60 + + #ifndef VR9_RCU_BASE_ADDR + #define VR9_RCU_BASE_ADDR (0xBF203000) + #endif + + #ifndef VR9_CGU + #define VR9_CGU (0xBF103000) + #endif + #ifndef VR9_CGU_IFCCR + #define VR9_CGU_IFCCR ((volatile unsigned long *)(VR9_CGU+ 0x0018)) + #endif + + #ifndef VR9_PMU + #define VR9_PMU (KSEG1+0x1F102000) + #endif + #ifndef VR9_PMU_PWDCR + #define VR9_PMU_PWDCR ((volatile unsigned long *)(VR9_PMU+0x001C)) + #endif + + #ifndef VR9_GPIO_P0_OUT + #define VR9_GPIO_P0_OUT (0xBF103000+0x10) + #define VR9_GPIO_P0_DIR (0xBF103000+0x18) + #define VR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define VR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define VR9_GPIO_P0_OD (0xBF103000+0x24) + #define VR9_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define VR9_GPIO_P0_PUDEN (0xBF103000+0x30) + #define VR9_GPIO_P1_OUT (0xBF103000+0x40) + #define VR9_GPIO_P1_DIR (0xBF103000+0x48) + #define VR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define VR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define VR9_GPIO_P1_OD (0xBF103000+0x54) + #define VR9_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define VR9_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + #define VR9_RCU_USB1CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x18)) + #define VR9_RCU_USB2CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x34)) + #define VR9_RCU_USB_ANA_CFG1A ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x38)) + #define VR9_RCU_USB_ANA_CFG1B ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x3C)) + #define VR9_RCU_USBRESET ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x10)) + #define VR9_RCU_USBRESET2 ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x48)) + #define VR9_USBCFG_ARB 7 // + #define VR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define VR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define VR9_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end + + /*== AVM/BC 20101220 Workaround VR9 DMA burst size == + * Using 2 Devices in diferent ports cause a general USB Host Error. + * Workaround found in UGW4.3 + */ +// #define default_param_dma_burst_size 4 //(ALL) + //WA for AHB + #define default_param_dma_burst_size 0 //(ALL) + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a + #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 240 + #define default_param_nperio_tx_fifo_size 240 + #define default_param_perio_tx_fifo_size 32 + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ +#if 0 + #define default_param_rx_fifo_size 256 + #define default_param_tx_fifo_size_00 -1 + #define default_param_tx_fifo_size_01 -1 + #define default_param_tx_fifo_size_02 -1 +#else + #define default_param_rx_fifo_size 256 + #define default_param_tx_fifo_size_00 32 + #define default_param_tx_fifo_size_01 200 + #define default_param_tx_fifo_size_02 8 +#endif + #define default_param_tx_fifo_size_03 -1 + #define default_param_tx_fifo_size_04 -1 + #define default_param_tx_fifo_size_05 -1 + #define default_param_tx_fifo_size_06 -1 + #define default_param_tx_fifo_size_07 -1 + #define default_param_tx_fifo_size_08 -1 + #define default_param_tx_fifo_size_09 -1 + #define default_param_tx_fifo_size_10 -1 + #define default_param_tx_fifo_size_11 -1 + #define default_param_tx_fifo_size_12 -1 + #define default_param_tx_fifo_size_13 -1 + #define default_param_tx_fifo_size_14 -1 + #define default_param_tx_fifo_size_15 -1 + #define default_param_dma_unalgned_tx -1 + #define default_param_dma_unalgned_rx -1 + #define default_param_thr_ctl -1 + #define default_param_tx_thr_length -1 + #define default_param_rx_thr_length -1 + #endif //__IS_DEVICE__ + #else // __IS_VR9__ + #error "Please choose one platform!!" + #endif // __IS_VR9__ + +#else //UEIP + #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) +// #define IFXUSB_IRQ 54 + #define IFXUSB_IOMEM_BASE 0x1e101000 + #define IFXUSB_FIFOMEM_BASE 0x1e120000 + #define IFXUSB_FIFODBG_BASE 0x1e140000 +// #define IFXUSB_OC_IRQ 151 + + + #ifndef DANUBE_RCU_BASE_ADDR + #define DANUBE_RCU_BASE_ADDR (0xBF203000) + #endif + + #ifndef DANUBE_CGU + #define DANUBE_CGU (0xBF103000) + #endif + #ifndef DANUBE_CGU_IFCCR + #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018)) + #endif + #ifndef DANUBE_PMU + #define DANUBE_PMU (KSEG1+0x1F102000) + #endif + #ifndef DANUBE_PMU_PWDCR + #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C)) + #endif + + #ifndef DANUBE_GPIO_P0_OUT + #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10) + #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18) + #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define DANUBE_GPIO_P0_OD (0xBF103000+0x24) + #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30) + #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40) + #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48) + #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define DANUBE_GPIO_P1_OD (0xBF103000+0x54) + #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + + #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18)) + #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10)) + #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end + + #define default_param_dma_burst_size 4 + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 4 //(NoChange) + #define default_param_turn_around_time_fs 4 //(NoChange) + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 640 + #define default_param_nperio_tx_fifo_size 640 + #define default_param_perio_tx_fifo_size 768 + #endif //__IS_HOST__ + + #ifdef __IS_DEVICE__ + #ifdef __DED_INTR__ + #define default_param_rx_fifo_size 1024 + #define default_param_nperio_tx_fifo_size 1016 + #define default_param_perio_tx_fifo_size_01 8 + #else + #define default_param_rx_fifo_size 1024 + #define default_param_nperio_tx_fifo_size 1024 + #define default_param_perio_tx_fifo_size_01 0 + #endif + #define default_param_perio_tx_fifo_size_02 0 + #define default_param_perio_tx_fifo_size_03 0 + #define default_param_perio_tx_fifo_size_04 0 + #define default_param_perio_tx_fifo_size_05 0 + #define default_param_perio_tx_fifo_size_06 0 + #define default_param_perio_tx_fifo_size_07 0 + #define default_param_perio_tx_fifo_size_08 0 + #define default_param_perio_tx_fifo_size_09 0 + #define default_param_perio_tx_fifo_size_10 0 + #define default_param_perio_tx_fifo_size_11 0 + #define default_param_perio_tx_fifo_size_12 0 + #define default_param_perio_tx_fifo_size_13 0 + #define default_param_perio_tx_fifo_size_14 0 + #define default_param_perio_tx_fifo_size_15 0 + #endif //__IS_DEVICE__ + + #elif defined(__IS_AMAZON_SE__) + #include <asm/amazon_se/amazon_se.h> + //#include <asm/amazon_se/irq.h> + +// #define IFXUSB_IRQ 31 + #define IFXUSB_IOMEM_BASE 0x1e101000 + #define IFXUSB_FIFOMEM_BASE 0x1e120000 + #define IFXUSB_FIFODBG_BASE 0x1e140000 +// #define IFXUSB_OC_IRQ 20 + + #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18)) + #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10)) + #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end + + #ifndef AMAZON_SE_GPIO_P0_OUT + #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10) + #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18) + #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24) + #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30) + #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40) + #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48) + #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54) + #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + + #ifndef AMAZON_SE_CGU + #define AMAZON_SE_CGU (0xBF103000) + #endif + #ifndef AMAZON_SE_CGU_IFCCR + #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018)) + #endif + #ifndef AMAZON_SE_PMU + #define AMAZON_SE_PMU (KSEG1+0x1F102000) + #endif + #ifndef AMAZON_SE_PMU_PWDCR + #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C)) + #endif + + #define default_param_dma_burst_size 4 + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 4 //(NoChange) + #define default_param_turn_around_time_fs 4 //(NoChange) + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 240 + #define default_param_nperio_tx_fifo_size 240 + #define default_param_perio_tx_fifo_size 32 + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ + #ifdef __DED_INTR__ + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 248 + #define default_param_perio_tx_fifo_size_01 8 + #else + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 256 + #define default_param_perio_tx_fifo_size_01 0 + #endif + #define default_param_perio_tx_fifo_size_02 0 + #define default_param_perio_tx_fifo_size_03 0 + #define default_param_perio_tx_fifo_size_04 0 + #define default_param_perio_tx_fifo_size_05 0 + #define default_param_perio_tx_fifo_size_06 0 + #define default_param_perio_tx_fifo_size_07 0 + #define default_param_perio_tx_fifo_size_08 0 + #define default_param_perio_tx_fifo_size_09 0 + #define default_param_perio_tx_fifo_size_10 0 + #define default_param_perio_tx_fifo_size_11 0 + #define default_param_perio_tx_fifo_size_12 0 + #define default_param_perio_tx_fifo_size_13 0 + #define default_param_perio_tx_fifo_size_14 0 + #define default_param_perio_tx_fifo_size_15 0 + #endif //__IS_DEVICE__ + + #elif defined(__IS_AR9__) +// #define IFXUSB1_IRQ 54 + #define IFXUSB1_IOMEM_BASE 0x1E101000 + #define IFXUSB1_FIFOMEM_BASE 0x1E120000 + #define IFXUSB1_FIFODBG_BASE 0x1E140000 + +// #define IFXUSB2_IRQ 83 + #define IFXUSB2_IOMEM_BASE 0x1E106000 + #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000 + #define IFXUSB2_FIFODBG_BASE 0x1E1C0000 + +// #define IFXUSB_OC_IRQ 60 + + #ifndef AMAZON_S_RCU_BASE_ADDR + #define AMAZON_S_RCU_BASE_ADDR (0xBF203000) + #endif + + #ifndef AMAZON_S_CGU + #define AMAZON_S_CGU (0xBF103000) + #endif + #ifndef AMAZON_S_CGU_IFCCR + #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018)) + #endif + + #ifndef AMAZON_S_PMU + #define AMAZON_S_PMU (KSEG1+0x1F102000) + #endif + #ifndef AMAZON_S_PMU_PWDCR + #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C)) + #endif + + #ifndef AMAZON_S_GPIO_P0_OUT + #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10) + #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18) + #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24) + #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30) + #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40) + #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48) + #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54) + #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18)) + #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34)) + #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10)) + #define AMAZON_S_USBCFG_ARB 7 // + #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end + + #define default_param_dma_burst_size 4 + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 4 //(NoChange) + #define default_param_turn_around_time_fs 4 //(NoChange) + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 240 + #define default_param_nperio_tx_fifo_size 240 + #define default_param_perio_tx_fifo_size 32 + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ + #ifdef __DED_INTR__ + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 248 + #define default_param_perio_tx_fifo_size_01 8 + #else + #define default_param_rx_fifo_size 256 + #define default_param_nperio_tx_fifo_size 256 + #define default_param_perio_tx_fifo_size_01 0 + #endif + #define default_param_perio_tx_fifo_size_02 0 + #define default_param_perio_tx_fifo_size_03 0 + #define default_param_perio_tx_fifo_size_04 0 + #define default_param_perio_tx_fifo_size_05 0 + #define default_param_perio_tx_fifo_size_06 0 + #define default_param_perio_tx_fifo_size_07 0 + #define default_param_perio_tx_fifo_size_08 0 + #define default_param_perio_tx_fifo_size_09 0 + #define default_param_perio_tx_fifo_size_10 0 + #define default_param_perio_tx_fifo_size_11 0 + #define default_param_perio_tx_fifo_size_12 0 + #define default_param_perio_tx_fifo_size_13 0 + #define default_param_perio_tx_fifo_size_14 0 + #define default_param_perio_tx_fifo_size_15 0 + #endif //__IS_DEVICE__ + + #elif defined(__IS_VR9__) +// #define IFXUSB1_IRQ 54 + #define IFXUSB1_IOMEM_BASE 0x1E101000 + #define IFXUSB1_FIFOMEM_BASE 0x1E120000 + #define IFXUSB1_FIFODBG_BASE 0x1E140000 + +// #define IFXUSB2_IRQ 83 + #define IFXUSB2_IOMEM_BASE 0x1E106000 + #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000 + #define IFXUSB2_FIFODBG_BASE 0x1E1C0000 +// #define IFXUSB_OC_IRQ 60 + + #ifndef AMAZON_S_RCU_BASE_ADDR + #define AMAZON_S_RCU_BASE_ADDR (0xBF203000) + #endif + + #ifndef AMAZON_S_CGU + #define AMAZON_S_CGU (0xBF103000) + #endif + #ifndef AMAZON_S_CGU_IFCCR + #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018)) + #endif + + #ifndef AMAZON_S_PMU + #define AMAZON_S_PMU (KSEG1+0x1F102000) + #endif + #ifndef AMAZON_S_PMU_PWDCR + #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C)) + #endif + + #ifndef AMAZON_S_GPIO_P0_OUT + #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10) + #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18) + #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C) + #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20) + #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24) + #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C) + #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30) + #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40) + #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48) + #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C) + #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50) + #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54) + #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C) + #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60) + #endif + + #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18)) + #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34)) + #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10)) + #define AMAZON_S_USBCFG_ARB 7 // + #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device + #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end + #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end + + #define default_param_dma_burst_size 4 //(ALL) + + #define default_param_speed IFXUSB_PARAM_SPEED_HIGH + + #define default_param_max_transfer_size -1 //(Max, hwcfg) + #define default_param_max_packet_count -1 //(Max, hwcfg) + #define default_param_phy_utmi_width 16 + + #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a + #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a + #define default_param_timeout_cal_hs -1 //(NoChange) + #define default_param_timeout_cal_fs -1 //(NoChange) + + #define default_param_data_fifo_size -1 //(Max, hwcfg) + + #ifdef __IS_HOST__ + #define default_param_host_channels -1 //(Max, hwcfg) + #define default_param_rx_fifo_size 240 + #define default_param_nperio_tx_fifo_size 240 + #define default_param_perio_tx_fifo_size 32 + #endif //__IS_HOST__ + #ifdef __IS_DEVICE__ + #define default_param_rx_fifo_size 256 + #define default_param_tx_fifo_size_00 -1 + #define default_param_tx_fifo_size_01 -1 + #define default_param_tx_fifo_size_02 -1 + #define default_param_tx_fifo_size_03 -1 + #define default_param_tx_fifo_size_04 -1 + #define default_param_tx_fifo_size_05 -1 + #define default_param_tx_fifo_size_06 -1 + #define default_param_tx_fifo_size_07 -1 + #define default_param_tx_fifo_size_08 -1 + #define default_param_tx_fifo_size_09 -1 + #define default_param_tx_fifo_size_10 -1 + #define default_param_tx_fifo_size_11 -1 + #define default_param_tx_fifo_size_12 -1 + #define default_param_tx_fifo_size_13 -1 + #define default_param_tx_fifo_size_14 -1 + #define default_param_tx_fifo_size_15 -1 + #define default_param_dma_unalgned_tx -1 + #define default_param_dma_unalgned_rx -1 + #define default_param_thr_ctl -1 + #define default_param_tx_thr_length -1 + #define default_param_rx_thr_length -1 + #endif //__IS_DEVICE__ + #else // __IS_VR9__ + #error "Please choose one platform!!" + #endif // __IS_VR9__ +#endif //UEIP + +/*@}*//*IFXUSB_PLATEFORM_MEM_ADDR*/ + +///////////////////////////////////////////////////////////////////////// + +#ifdef __IS_HOST__ + #ifdef CONFIG_USB_HOST_IFX_FORCE_USB11 + #undef default_param_speed + #define default_param_speed IFXUSB_PARAM_SPEED_FULL + #endif +#endif +#ifdef __IS_DEVICE__ + #ifndef CONFIG_USB_GADGET_DUALSPEED + #undef default_param_speed + #define default_param_speed IFXUSB_PARAM_SPEED_FULL + #endif +#endif + +///////////////////////////////////////////////////////////////////////// + +static __inline__ void UDELAY( const uint32_t _usecs ) +{ + udelay( _usecs ); +} + +static __inline__ void MDELAY( const uint32_t _msecs ) +{ + mdelay( _msecs ); +} + +static __inline__ void SPIN_LOCK( spinlock_t *_lock ) +{ + spin_lock(_lock); +} + +static __inline__ void SPIN_UNLOCK( spinlock_t *_lock ) +{ + spin_unlock(_lock); +} + +#define SPIN_LOCK_IRQSAVE( _l, _f ) \ + { \ + spin_lock_irqsave(_l,_f); \ + } + +#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) \ + { \ + spin_unlock_irqrestore(_l,_f); \ + } + +///////////////////////////////////////////////////////////////////////// +/*! + \addtogroup IFXUSB_DBG_ROUTINE + */ +/*@{*/ +#ifdef __IS_HOST__ + extern uint32_t h_dbg_lvl; +#endif + +#ifdef __IS_DEVICE__ + extern uint32_t d_dbg_lvl; +#endif + +/*! \brief When debug level has the DBG_CIL bit set, display CIL Debug messages. */ +#define DBG_CIL (0x2) +/*! \brief When debug level has the DBG_CILV bit set, display CIL Verbose debug messages */ +#define DBG_CILV (0x20) +/*! \brief When debug level has the DBG_PCD bit set, display PCD (Device) debug messages */ +#define DBG_PCD (0x4) +/*! \brief When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug messages */ +#define DBG_PCDV (0x40) +/*! \brief When debug level has the DBG_HCD bit set, display Host debug messages */ +#define DBG_HCD (0x8) +/*! \brief When debug level has the DBG_HCDV bit set, display Verbose Host debug messages */ +#define DBG_HCDV (0x80) +/*! \brief When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host mode. */ +#define DBG_HCD_URB (0x800) +/*! \brief When debug level has any bit set, display debug messages */ +#define DBG_ANY (0xFF) +/*! \brief All debug messages off */ +#define DBG_OFF 0 + +#define DBG_ENTRY (0x8000) + +#define IFXUSB "IFXUSB: " + +/*! + \fn inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new ) + \brief Set the Debug Level variable. + \param _new 32-bit mask of debug level. + \return previous debug level + */ +static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new ) +{ + #ifdef __IS_HOST__ + uint32_t old = h_dbg_lvl; + h_dbg_lvl = _new; + #endif + + #ifdef __IS_DEVICE__ + uint32_t old = d_dbg_lvl; + d_dbg_lvl = _new; + #endif + return old; +} + +#ifdef __DEBUG__ + #ifdef __IS_HOST__ + # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&h_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0) + # define CHK_DEBUG_LEVEL(level) ((level) & h_dbg_lvl) + #endif + + #ifdef __IS_DEVICE__ + # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&d_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0) + # define CHK_DEBUG_LEVEL(level) ((level) & d_dbg_lvl) + #endif + + # define IFX_DEBUGP(x...) IFX_DEBUGPL(DBG_ANY, x ) +#else + # define IFX_DEBUGPL(lvl, x...) do{}while(0) + # define IFX_DEBUGP(x...) + # define CHK_DEBUG_LEVEL(level) (0) +#endif //__DEBUG__ + +/* Print an Error message. */ +#define IFX_ERROR(x...) printk( KERN_ERR IFXUSB x ) +/* Print a Warning message. */ +#define IFX_WARN(x...) printk( KERN_WARNING IFXUSB x ) +/* Print a notice (normal but significant message). */ +#define IFX_NOTICE(x...) printk( KERN_NOTICE IFXUSB x ) +/* Basic message printing. */ +#define IFX_PRINT(x...) printk( KERN_INFO IFXUSB x ) + +/*@}*//*IFXUSB_DBG_ROUTINE*/ + + +#endif //__IFXUSB_PLAT_H__ + diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_regs.h b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_regs.h new file mode 100644 index 0000000000..014c6dbcfd --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_regs.h @@ -0,0 +1,1420 @@ +/***************************************************************************** + ** FILE NAME : ifxusb_regs.h + ** PROJECT : IFX USB sub-system V3 + ** MODULES : IFX USB sub-system Host and Device driver + ** SRC VERSION : 1.0 + ** DATE : 1/Jan/2009 + ** AUTHOR : Chen, Howard + ** DESCRIPTION : This file contains the data structures for accessing the IFXUSB core + ** registers. + ** The application interfaces with the USB core by reading from and + ** writing to the Control and Status Register (CSR) space through the + ** AHB Slave interface. These registers are 32 bits wide, and the + ** addresses are 32-bit-block aligned. + ** CSRs are classified as follows: + ** - Core Global Registers + ** - Device Mode Registers + ** - Device Global Registers + ** - Device Endpoint Specific Registers + ** - Host Mode Registers + ** - Host Global Registers + ** - Host Port CSRs + ** - Host Channel Specific Registers + ** + ** Only the Core Global registers can be accessed in both Device and + ** Host modes. When the USB core is operating in one mode, either + ** Device or Host, the application must not access registers from the + ** other mode. When the core switches from one mode to another, the + ** registers in the new mode of operation must be reprogrammed as they + ** would be after a power-on reset. + ** FUNCTIONS : + ** COMPILER : gcc + ** REFERENCE : Synopsys DWC-OTG Driver 2.7 + ** COPYRIGHT : + ** Version Control Section ** + ** $Author$ + ** $Date$ + ** $Revisions$ + ** $Log$ Revision history +*****************************************************************************/ + + + +/*! + \defgroup IFXUSB_CSR_DEFINITION Control and Status Register bit-map definition + \ingroup IFXUSB_DRIVER_V3 + \brief Data structures for accessing the IFXUSB core registers. + The application interfaces with the USB core by reading from and + writing to the Control and Status Register (CSR) space through the + AHB Slave interface. These registers are 32 bits wide, and the + addresses are 32-bit-block aligned. + CSRs are classified as follows: + - Core Global Registers + - Device Mode Registers + - Device Global Registers + - Device Endpoint Specific Registers + - Host Mode Registers + - Host Global Registers + - Host Port CSRs + - Host Channel Specific Registers + + Only the Core Global registers can be accessed in both Device andHost modes. + When the USB core is operating in one mode, either Device or Host, the + application must not access registers from the other mode. When the core + switches from one mode to another, the registers in the new mode of operation + must be reprogrammed as they would be after a power-on reset. + */ + +/*! + \defgroup IFXUSB_CSR_DEVICE_GLOBAL_REG Device Mode Registers + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to access Device Mode Global Registers + */ + +/*! + \defgroup IFXUSB_CSR_DEVICE_EP_REG Device Mode EP Registers + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to access Device Mode EP Registers + There will be one set of endpoint registers per logical endpoint + implemented. + These registers are visible only in Device mode and must not be + accessed in Host mode, as the results are unknown. + */ + +/*! + \defgroup IFXUSB_CSR_DEVICE_DMA_DESC Device mode scatter dma descriptor strusture + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to DMA descriptor + */ + + +/*! + \defgroup IFXUSB_CSR_HOST_GLOBAL_REG Host Mode Registers + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to access Host Mode Global Registers + */ + +/*! + \defgroup IFXUSB_CSR_HOST_HC_REG Host Mode HC Registers + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to access Host Mode Host Channel Registers + There will be one set of endpoint registers per host channel + implemented. + These registers are visible only in Host mode and must not be + accessed in Device mode, as the results are unknown. + */ + +/*! + \defgroup IFXUSB_CSR_PWR_CLK_GATING_REG Power and Clock Gating Control Register + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to Power and Clock Gating Control Register + */ + + + + + + + + +/*! + \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to access Core Global Registers + */ +/*! + \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers + \ingroup IFXUSB_CSR_DEFINITION + \brief Bit-mapped structure to access Core Global Registers + */ + + + + + + + + + +/*! + \file ifxusb_regs.h + \ingroup IFXUSB_DRIVER_V3 + \brief This file contains the data structures for accessing the IFXUSB core registers. + */ + + +#ifndef __IFXUSB_REGS_H__ +#define __IFXUSB_REGS_H__ + +/****************************************************************************/ + +#define MAX_PERIO_FIFOS 15 /** Maximum number of Periodic FIFOs */ +#define MAX_TX_FIFOS 15 /** Maximum number of Periodic FIFOs */ +#define MAX_EPS_CHANNELS 16 /** Maximum number of Endpoints/HostChannels */ + +/****************************************************************************/ + +/*! + \addtogroup IFXUSB_CSR_ACCESS_MACROS + */ +/*@{*/ + +//#define RecordRegRW + +/*! + \fn static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg) + \brief Reads the content of a register. + \param _reg address of register to read. + \return contents of the register. + */ +static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg) +{ + #ifdef RecordRegRW + uint32_t r; + r=*(_reg); + return (r); + #else + return (*(_reg)); + #endif +}; + + +/*! + \fn static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value) + \brief Writes a register with a 32 bit value. + \param _reg address of register to write. + \param _value value to write to _reg. + */ +static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value) +{ + #ifdef RecordRegRW + printk(KERN_INFO "[W %p<-%08X]\n",_reg,_value); + #else + *(_reg)=_value; + #endif +}; + +/*! + \fn static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask) + \brief Modifies bit values in a register. Using the + algorithm: (reg_contents & ~clear_mask) | set_mask. + \param _reg address of register to modify. + \param _clear_mask bit mask to be cleared. + \param _set_mask bit mask to be set. + */ +static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask) +{ + uint32_t v; + #ifdef RecordRegRW + uint32_t r; + v= *(_reg); + r=v; + r&=(~_clear_mask); + r|= _set_mask; + *(_reg)=r ; + printk(KERN_INFO "[M %p->%08X+%08X/%08X<-%08X]\n",_reg,r,_clear_mask,_set_mask,r); + #else + v= *(_reg); + v&=(~_clear_mask); + v|= _set_mask; + *(_reg)=v ; + #endif +}; + +/*@}*//*IFXUSB_CSR_ACCESS_MACROS*/ +/****************************************************************************/ + +/*! + \addtogroup IFXUSB_CSR_CORE_GLOBAL_REG + */ +/*@{*/ + +/*! + \struct ifxusb_core_global_regs + \brief IFXUSB Core registers . + The ifxusb_core_global_regs structure defines the size + and relative field offsets for the Core Global registers. + */ +typedef struct ifxusb_core_global_regs +{ + volatile uint32_t gotgctl; /*!< 000h OTG Control and Status Register. */ + volatile uint32_t gotgint; /*!< 004h OTG Interrupt Register. */ + volatile uint32_t gahbcfg; /*!< 008h Core AHB Configuration Register. */ + volatile uint32_t gusbcfg; /*!< 00Ch Core USB Configuration Register. */ + volatile uint32_t grstctl; /*!< 010h Core Reset Register. */ + volatile uint32_t gintsts; /*!< 014h Core Interrupt Register. */ + volatile uint32_t gintmsk; /*!< 018h Core Interrupt Mask Register. */ + volatile uint32_t grxstsr; /*!< 01Ch Receive Status Queue Read Register (Read Only). */ + volatile uint32_t grxstsp; /*!< 020h Receive Status Queue Read & POP Register (Read Only). */ + volatile uint32_t grxfsiz; /*!< 024h Receive FIFO Size Register. */ + volatile uint32_t gnptxfsiz; /*!< 028h Non Periodic Transmit FIFO Size Register. */ + volatile uint32_t gnptxsts; /*!< 02Ch Non Periodic Transmit FIFO/Queue Status Register (Read Only). */ + volatile uint32_t gi2cctl; /*!< 030h I2C Access Register. */ + volatile uint32_t gpvndctl; /*!< 034h PHY Vendor Control Register. */ + volatile uint32_t ggpio; /*!< 038h General Purpose Input/Output Register. */ + volatile uint32_t guid; /*!< 03Ch User ID Register. */ + volatile uint32_t gsnpsid; /*!< 040h Synopsys ID Register (Read Only). */ + volatile uint32_t ghwcfg1; /*!< 044h User HW Config1 Register (Read Only). */ + volatile uint32_t ghwcfg2; /*!< 048h User HW Config2 Register (Read Only). */ + volatile uint32_t ghwcfg3; /*!< 04Ch User HW Config3 Register (Read Only). */ + volatile uint32_t ghwcfg4; /*!< 050h User HW Config4 Register (Read Only). */ + volatile uint32_t reserved[43]; /*!< 054h Reserved 054h-0FFh */ + volatile uint32_t hptxfsiz; /*!< 100h Host Periodic Transmit FIFO Size Register. */ + volatile uint32_t dptxfsiz_dieptxf[15];/*!< 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15. + Device Periodic Transmit FIFO#n Register if dedicated + fifos are disabled, otherwise Device Transmit FIFO#n + Register. + */ +} ifxusb_core_global_regs_t; + +/*! + \brief Bits of the Core OTG Control and Status Register (GOTGCTL). + */ +typedef union gotgctl_data +{ + uint32_t d32; + struct{ + unsigned reserved21_31 : 11; + unsigned currmod : 1 ; /*!< 20 */ + unsigned bsesvld : 1 ; /*!< 19 */ + unsigned asesvld : 1 ; /*!< 18 */ + unsigned reserved17 : 1 ; + unsigned conidsts : 1 ; /*!< 16 */ + unsigned reserved12_15 : 4 ; + unsigned devhnpen : 1 ; /*!< 11 */ + unsigned hstsethnpen : 1 ; /*!< 10 */ + unsigned hnpreq : 1 ; /*!< 09 */ + unsigned hstnegscs : 1 ; /*!< 08 */ + unsigned reserved2_7 : 6 ; + unsigned sesreq : 1 ; /*!< 01 */ + unsigned sesreqscs : 1 ; /*!< 00 */ + } b; +} gotgctl_data_t; + +/*! + \brief Bit fields of the Core OTG Interrupt Register (GOTGINT). + */ +typedef union gotgint_data +{ + uint32_t d32; + struct + { + unsigned reserved31_20 : 12; + unsigned debdone : 1 ; /*!< 19 Debounce Done */ + unsigned adevtoutchng : 1 ; /*!< 18 A-Device Timeout Change */ + unsigned hstnegdet : 1 ; /*!< 17 Host Negotiation Detected */ + unsigned reserver10_16 : 7 ; + unsigned hstnegsucstschng : 1 ; /*!< 09 Host Negotiation Success Status Change */ + unsigned sesreqsucstschng : 1 ; /*!< 08 Session Request Success Status Change */ + unsigned reserved3_7 : 5 ; + unsigned sesenddet : 1 ; /*!< 02 Session End Detected */ + unsigned reserved0_1 : 2 ; + } b; +} gotgint_data_t; + +/*! + \brief Bit fields of the Core AHB Configuration Register (GAHBCFG). + */ +typedef union gahbcfg_data +{ + uint32_t d32; + struct + { + unsigned reserved9_31 : 23; + unsigned ptxfemplvl : 1 ; /*!< 08 Periodic FIFO empty level trigger condition*/ + unsigned nptxfemplvl : 1 ; /*!< 07 Non-Periodic FIFO empty level trigger condition*/ + #define IFXUSB_GAHBCFG_TXFEMPTYLVL_EMPTY 1 + #define IFXUSB_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 + unsigned reserved : 1 ; + unsigned dmaenable : 1 ; /*!< 05 DMA enable*/ + #define IFXUSB_GAHBCFG_DMAENABLE 1 + unsigned hburstlen : 4 ; /*!< 01-04 DMA Burst-length*/ + #define IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE 0 + #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR 1 + #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4 3 + #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8 5 + #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16 7 + unsigned glblintrmsk : 1 ; /*!< 00 USB Global Interrupt Enable */ + #define IFXUSB_GAHBCFG_GLBINT_ENABLE 1 + } b; +} gahbcfg_data_t; + +/*! + \brief Bit fields of the Core USB Configuration Register (GUSBCFG). +*/ +typedef union gusbcfg_data +{ + uint32_t d32; + struct + { + unsigned reserved31 : 1; + unsigned ForceDevMode : 1; /*!< 30 Force Device Mode */ + unsigned ForceHstMode : 1; /*!< 29 Force Host Mode */ + unsigned TxEndDelay : 1; /*!< 28 Tx End Delay */ + unsigned reserved2723 : 5; + unsigned term_sel_dl_pulse : 1; /*!< 22 TermSel DLine Pulsing Selection */ + unsigned reserved2117 : 5; + unsigned otgutmifssel : 1; /*!< 16 UTMIFS Select */ + unsigned phylpwrclksel : 1; /*!< 15 PHY Low-Power Clock Select */ + unsigned reserved14 : 1; + unsigned usbtrdtim : 4; /*!< 13-10 USB Turnaround Time */ + unsigned hnpcap : 1; /*!< 09 HNP-Capable */ + unsigned srpcap : 1; /*!< 08 SRP-Capable */ + unsigned reserved07 : 1; + unsigned physel : 1; /*!< 06 USB 2.0 High-Speed PHY or + USB 1.1 Full-Speed Serial + Transceiver Select */ + unsigned fsintf : 1; /*!< 05 Full-Speed Serial Interface Select */ + unsigned ulpi_utmi_sel : 1; /*!< 04 ULPI or UTMI+ Select */ + unsigned phyif : 1; /*!< 03 PHY Interface */ + unsigned toutcal : 3; /*!< 00-02 HS/FS Timeout Calibration */ + }b; +} gusbcfg_data_t; + +/*! + \brief Bit fields of the Core Reset Register (GRSTCTL). + */ +typedef union grstctl_data +{ + uint32_t d32; + struct + { + unsigned ahbidle : 1; /*!< 31 AHB Master Idle. Indicates the AHB Master State + Machine is in IDLE condition. */ + unsigned dmareq : 1; /*!< 30 DMA Request Signal. Indicated DMA request is in + probress. Used for debug purpose. */ + unsigned reserved11_29 :19; + unsigned txfnum : 5; /*!< 10-06 TxFIFO Number (TxFNum) to be flushed. + 0x00: Non Periodic TxFIFO Flush or TxFIFO 0 + 0x01-0x0F: Periodic TxFIFO Flush or TxFIFO n + 0x10: Flush all TxFIFO + */ + unsigned txfflsh : 1; /*!< 05 TxFIFO Flush */ + unsigned rxfflsh : 1; /*!< 04 RxFIFO Flush */ + unsigned intknqflsh : 1; /*!< 03 In Token Sequence Learning Queue Flush (Device Only) */ + unsigned hstfrm : 1; /*!< 02 Host Frame Counter Reset (Host Only) */ + unsigned hsftrst : 1; /*!< 01 Hclk Soft Reset */ + + unsigned csftrst : 1; /*!< 00 Core Soft Reset + The application can flush the control logic in the + entire core using this bit. This bit resets the + pipelines in the AHB Clock domain as well as the + PHY Clock domain. + The state machines are reset to an IDLE state, the + control bits in the CSRs are cleared, all the + transmit FIFOs and the receive FIFO are flushed. + The status mask bits that control the generation of + the interrupt, are cleared, to clear the + interrupt. The interrupt status bits are not + cleared, so the application can get the status of + any events that occurred in the core after it has + set this bit. + Any transactions on the AHB are terminated as soon + as possible following the protocol. Any + transactions on the USB are terminated immediately. + The configuration settings in the CSRs are + unchanged, so the software doesn't have to + reprogram these registers (Device + Configuration/Host Configuration/Core System + Configuration/Core PHY Configuration). + The application can write to this bit, any time it + wants to reset the core. This is a self clearing + bit and the core clears this bit after all the + necessary logic is reset in the core, which may + take several clocks, depending on the current state + of the core. + */ + }b; +} grstctl_t; + +/*! + \brief Bit fields of the Core Interrupt Mask Register (GINTMSK) and + Core Interrupt Register (GINTSTS). + */ +typedef union gint_data +{ + uint32_t d32; + #define IFXUSB_SOF_INTR_MASK 0x0008 + struct + { + unsigned wkupintr : 1; /*!< 31 Resume/Remote Wakeup Detected Interrupt */ + unsigned sessreqintr : 1; /*!< 30 Session Request/New Session Detected Interrupt */ + unsigned disconnect : 1; /*!< 29 Disconnect Detected Interrupt */ + unsigned conidstschng : 1; /*!< 28 Connector ID Status Change */ + unsigned reserved27 : 1; + unsigned ptxfempty : 1; /*!< 26 Periodic TxFIFO Empty */ + unsigned hcintr : 1; /*!< 25 Host Channels Interrupt */ + unsigned portintr : 1; /*!< 24 Host Port Interrupt */ + unsigned reserved23 : 1; + unsigned fetsuspmsk : 1; /*!< 22 Data Fetch Suspended */ + unsigned incomplisoout : 1; /*!< 21 Incomplete IsochronousOUT/Period Transfer */ + unsigned incomplisoin : 1; /*!< 20 Incomplete Isochronous IN Transfer */ + unsigned outepintr : 1; /*!< 19 OUT Endpoints Interrupt */ + unsigned inepintr : 1; /*!< 18 IN Endpoints Interrupt */ + unsigned epmismatch : 1; /*!< 17 Endpoint Mismatch Interrupt */ + unsigned reserved16 : 1; + unsigned eopframe : 1; /*!< 15 End of Periodic Frame Interrupt */ + unsigned isooutdrop : 1; /*!< 14 Isochronous OUT Packet Dropped Interrupt */ + unsigned enumdone : 1; /*!< 13 Enumeration Done */ + unsigned usbreset : 1; /*!< 12 USB Reset */ + unsigned usbsuspend : 1; /*!< 11 USB Suspend */ + unsigned erlysuspend : 1; /*!< 10 Early Suspend */ + unsigned i2cintr : 1; /*!< 09 I2C Interrupt */ + unsigned reserved8 : 1; + unsigned goutnakeff : 1; /*!< 07 Global OUT NAK Effective */ + unsigned ginnakeff : 1; /*!< 06 Global Non-periodic IN NAK Effective */ + unsigned nptxfempty : 1; /*!< 05 Non-periodic TxFIFO Empty */ + unsigned rxstsqlvl : 1; /*!< 04 Receive FIFO Non-Empty */ + unsigned sofintr : 1; /*!< 03 Start of (u)Frame */ + unsigned otgintr : 1; /*!< 02 OTG Interrupt */ + unsigned modemismatch : 1; /*!< 01 Mode Mismatch Interrupt */ + unsigned reserved0 : 1; + } b; +} gint_data_t; + +/*! + \brief Bit fields in the Receive Status Read and Pop Registers (GRXSTSR, GRXSTSP) + */ +typedef union grxsts_data +{ + uint32_t d32; + struct + { + unsigned reserved : 7; + unsigned fn : 4; /*!< 24-21 Frame Number */ + unsigned pktsts : 4; /*!< 20-17 Packet Status */ + #define IFXUSB_DSTS_DATA_UPDT 0x2 // OUT Data Packet + #define IFXUSB_DSTS_XFER_COMP 0x3 // OUT Data Transfer Complete + #define IFXUSB_DSTS_GOUT_NAK 0x1 // Global OUT NAK + #define IFXUSB_DSTS_SETUP_COMP 0x4 // Setup Phase Complete + #define IFXUSB_DSTS_SETUP_UPDT 0x6 // SETUP Packet + unsigned dpid : 2; /*!< 16-15 Data PID */ + unsigned bcnt :11; /*!< 14-04 Byte Count */ + unsigned epnum : 4; /*!< 03-00 Endpoint Number */ + } db; + struct + { + unsigned reserved :11; + unsigned pktsts : 4; /*!< 20-17 Packet Status */ + #define IFXUSB_HSTS_DATA_UPDT 0x2 // OUT Data Packet + #define IFXUSB_HSTS_XFER_COMP 0x3 // OUT Data Transfer Complete + #define IFXUSB_HSTS_DATA_TOGGLE_ERR 0x5 // DATA TOGGLE Error + #define IFXUSB_HSTS_CH_HALTED 0x7 // Channel Halted + unsigned dpid : 2; /*!< 16-15 Data PID */ + unsigned bcnt :11; /*!< 14-04 Byte Count */ + unsigned chnum : 4; /*!< 03-00 Channel Number */ + } hb; +} grxsts_data_t; + +/*! + \brief Bit fields in the FIFO Size Registers (HPTXFSIZ, GNPTXFSIZ, DPTXFSIZn). + */ +typedef union fifosize_data +{ + uint32_t d32; + struct + { + unsigned depth : 16; /*!< 31-16 TxFIFO Depth (in DWord)*/ + unsigned startaddr : 16; /*!< 15-00 RAM Starting address */ + } b; +} fifosize_data_t; + +/*! + \brief Bit fields in the Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS). + */ + +typedef union gnptxsts_data +{ + uint32_t d32; + struct + { + unsigned reserved : 1; + unsigned nptxqtop_chnep : 4; /*!< 30-27 Channel/EP Number of top of the Non-Periodic + Transmit Request Queue + */ + unsigned nptxqtop_token : 2; /*!< 26-25 Token Type top of the Non-Periodic + Transmit Request Queue + 0 - IN/OUT + 1 - Zero Length OUT + 2 - PING/Complete Split + 3 - Channel Halt + */ + unsigned nptxqtop_terminate : 1; /*!< 24 Terminate (Last entry for the selected + channel/EP)*/ + unsigned nptxqspcavail : 8; /*!< 23-16 Transmit Request Queue Space Available */ + unsigned nptxfspcavail :16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/ + }b; +} gnptxsts_data_t; + + +/*! + \brief Bit fields in the Transmit FIFO Status Register (DTXFSTS). + */ +typedef union dtxfsts_data +{ + uint32_t d32; + struct + { + unsigned reserved : 16; + unsigned txfspcavail : 16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/ + }b; +} dtxfsts_data_t; + + +/*! + \brief Bit fields in the I2C Control Register (I2CCTL). + */ +typedef union gi2cctl_data +{ + uint32_t d32; + struct + { + unsigned bsydne : 1; /*!< 31 I2C Busy/Done*/ + unsigned rw : 1; /*!< 30 Read/Write Indicator */ + unsigned reserved : 2; + unsigned i2cdevaddr : 2; /*!< 27-26 I2C Device Address */ + unsigned i2csuspctl : 1; /*!< 25 I2C Suspend Control */ + unsigned ack : 1; /*!< 24 I2C ACK */ + unsigned i2cen : 1; /*!< 23 I2C Enable */ + unsigned addr : 7; /*!< 22-16 I2C Address */ + unsigned regaddr : 8; /*!< 15-08 I2C Register Addr */ + unsigned rwdata : 8; /*!< I2C Read/Write Data */ + } b; +} gi2cctl_data_t; + + +/*! + \brief Bit fields in the User HW Config1 Register. + */ +typedef union hwcfg1_data +{ + uint32_t d32; + struct + { + unsigned ep_dir15 : 2; /*!< Direction of each EP + 0: BIDIR (IN and OUT) endpoint + 1: IN endpoint + 2: OUT endpoint + 3: Reserved + */ + unsigned ep_dir14 : 2; + unsigned ep_dir13 : 2; + unsigned ep_dir12 : 2; + unsigned ep_dir11 : 2; + unsigned ep_dir10 : 2; + unsigned ep_dir09 : 2; + unsigned ep_dir08 : 2; + unsigned ep_dir07 : 2; + unsigned ep_dir06 : 2; + unsigned ep_dir05 : 2; + unsigned ep_dir04 : 2; + unsigned ep_dir03 : 2; + unsigned ep_dir02 : 2; + unsigned ep_dir01 : 2; + unsigned ep_dir00 : 2; + }b; +} hwcfg1_data_t; + +/*! + \brief Bit fields in the User HW Config2 Register. + */ +typedef union hwcfg2_data +{ + uint32_t d32; + struct + { + unsigned reserved31 : 1; + unsigned dev_token_q_depth : 5; /*!< 30-26 Device Mode IN Token Sequence Learning Queue Depth */ + unsigned host_perio_tx_q_depth : 2; /*!< 25-24 Host Mode Periodic Request Queue Depth */ + unsigned nonperio_tx_q_depth : 2; /*!< 23-22 Non-periodic Request Queue Depth */ + unsigned rx_status_q_depth : 2; /*!< 21-20 Multi Processor Interrupt Enabled */ + unsigned dynamic_fifo : 1; /*!< 19 Dynamic FIFO Sizing Enabled */ + unsigned perio_ep_supported : 1; /*!< 18 Periodic OUT Channels Supported in Host Mode */ + unsigned num_host_chan : 4; /*!< 17-14 Number of Host Channels */ + unsigned num_dev_ep : 4; /*!< 13-10 Number of Device Endpoints */ + unsigned fs_phy_type : 2; /*!< 09-08 Full-Speed PHY Interface Type */ + #define IFXUSB_HWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 + #define IFXUSB_HWCFG2_FS_PHY_TYPE_DEDICATE 1 + #define IFXUSB_HWCFG2_FS_PHY_TYPE_UTMI 2 + #define IFXUSB_HWCFG2_FS_PHY_TYPE_ULPI 3 + unsigned hs_phy_type : 2; /*!< 07-06 High-Speed PHY Interface Type */ + #define IFXUSB_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 + #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI 1 + #define IFXUSB_HWCFG2_HS_PHY_TYPE_ULPI 2 + #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 + unsigned point2point : 1; /*!< 05 Point-to-Point */ + unsigned architecture : 2; /*!< 04-03 Architecture */ + #define IFXUSB_HWCFG2_ARCH_SLAVE_ONLY 0 + #define IFXUSB_HWCFG2_ARCH_EXT_DMA 1 + #define IFXUSB_HWCFG2_ARCH_INT_DMA 2 + unsigned op_mode : 3; /*!< 02-00 Mode of Operation */ + #define IFXUSB_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 + #define IFXUSB_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 + #define IFXUSB_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 + #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 + #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 + #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 + #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 + } b; +} hwcfg2_data_t; + +/*! + \brief Bit fields in the User HW Config3 Register. + */ +typedef union hwcfg3_data +{ + uint32_t d32; + struct + { + unsigned dfifo_depth :16; /*!< 31-16 DFIFO Depth */ + unsigned reserved15_12 : 4; + unsigned synch_reset_type : 1; /*!< 11 Reset Style for Clocked always Blocks in RTL */ + unsigned optional_features : 1; /*!< 10 Optional Features Removed */ + unsigned vendor_ctrl_if : 1; /*!< 09 Vendor Control Interface Support */ + unsigned i2c : 1; /*!< 08 I2C Selection */ + unsigned otg_func : 1; /*!< 07 OTG Function Enabled */ + unsigned packet_size_cntr_width : 3; /*!< 06-04 Width of Packet Size Counters */ + unsigned xfer_size_cntr_width : 4; /*!< 03-00 Width of Transfer Size Counters */ + } b; +} hwcfg3_data_t; + +/*! + \brief Bit fields in the User HW Config4 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg4_data +{ + uint32_t d32; + struct + { + unsigned desc_dma_dyn : 1; /*!< 31 Scatter/Gather DMA */ + unsigned desc_dma : 1; /*!< 30 Scatter/Gather DMA configuration */ + unsigned num_in_eps : 4; /*!< 29-26 Number of Device Mode IN Endpoints Including Control Endpoints */ + unsigned ded_fifo_en : 1; /*!< 25 Enable Dedicated Transmit FIFO for device IN Endpoints */ + unsigned session_end_filt_en : 1; /*!< 24 session_end Filter Enabled */ + unsigned b_valid_filt_en : 1; /*!< 23 b_valid Filter Enabled */ + unsigned a_valid_filt_en : 1; /*!< 22 a_valid Filter Enabled */ + unsigned vbus_valid_filt_en : 1; /*!< 21 vbus_valid Filter Enabled */ + unsigned iddig_filt_en : 1; /*!< 20 iddig Filter Enable */ + unsigned num_dev_mode_ctrl_ep : 4; /*!< 19-16 Number of Device Mode Control Endpoints in Addition to Endpoint 0 */ + unsigned utmi_phy_data_width : 2; /*!< 15-14 UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width */ + unsigned reserved13_06 : 8; + unsigned min_ahb_freq : 1; /*!< 05 Minimum AHB Frequency Less Than 60 MHz */ + unsigned power_optimiz : 1; /*!< 04 Enable Power Optimization? */ + unsigned num_dev_perio_in_ep : 4; /*!< 03-00 Number of Device Mode Periodic IN Endpoints */ + } b; +} hwcfg4_data_t; + +/*@}*//*IFXUSB_CSR_CORE_GLOBAL_REG*/ + +/****************************************************************************/ +/*! + \addtogroup IFXUSB_CSR_DEVICE_GLOBAL_REG + */ +/*@{*/ + +/*! + \struct ifxusb_dev_global_regs + \brief IFXUSB Device Mode Global registers. Offsets 800h-BFFh + The ifxusb_dev_global_regs structure defines the size + and relative field offsets for the Device Global registers. + These registers are visible only in Device mode and must not be + accessed in Host mode, as the results are unknown. + */ +typedef struct ifxusb_dev_global_regs +{ + volatile uint32_t dcfg; /*!< 800h Device Configuration Register. */ + volatile uint32_t dctl; /*!< 804h Device Control Register. */ + volatile uint32_t dsts; /*!< 808h Device Status Register (Read Only). */ + uint32_t unused; + volatile uint32_t diepmsk; /*!< 810h Device IN Endpoint Common Interrupt Mask Register. */ + volatile uint32_t doepmsk; /*!< 814h Device OUT Endpoint Common Interrupt Mask Register. */ + volatile uint32_t daint; /*!< 818h Device All Endpoints Interrupt Register. */ + volatile uint32_t daintmsk; /*!< 81Ch Device All Endpoints Interrupt Mask Register. */ + volatile uint32_t dtknqr1; /*!< 820h Device IN Token Queue Read Register-1 (Read Only). */ + volatile uint32_t dtknqr2; /*!< 824h Device IN Token Queue Read Register-2 (Read Only). */ + volatile uint32_t dvbusdis; /*!< 828h Device VBUS discharge Register.*/ + volatile uint32_t dvbuspulse; /*!< 82Ch Device VBUS Pulse Register. */ + volatile uint32_t dtknqr3_dthrctl; /*!< 830h Device IN Token Queue Read Register-3 (Read Only). + Device Thresholding control register (Read/Write) + */ + volatile uint32_t dtknqr4_fifoemptymsk; /*!< 834h Device IN Token Queue Read Register-4 (Read Only). + Device IN EPs empty Inr. Mask Register (Read/Write) + */ +} ifxusb_device_global_regs_t; + +/*! + \brief Bit fields in the Device Configuration Register. + */ + +typedef union dcfg_data +{ + uint32_t d32; + struct + { + unsigned reserved31_26 : 6; + unsigned perschintvl : 2; /*!< 25-24 Periodic Scheduling Interval */ + unsigned descdma : 1; /*!< 23 Enable Descriptor DMA in Device mode */ + unsigned epmscnt : 5; /*!< 22-18 In Endpoint Mis-match count */ + unsigned reserved13_17 : 5; + unsigned perfrint : 2; /*!< 12-11 Periodic Frame Interval */ + #define IFXUSB_DCFG_FRAME_INTERVAL_80 0 + #define IFXUSB_DCFG_FRAME_INTERVAL_85 1 + #define IFXUSB_DCFG_FRAME_INTERVAL_90 2 + #define IFXUSB_DCFG_FRAME_INTERVAL_95 3 + unsigned devaddr : 7; /*!< 10-04 Device Addresses */ + unsigned reserved3 : 1; + unsigned nzstsouthshk : 1; /*!< 02 Non Zero Length Status OUT Handshake */ + #define IFXUSB_DCFG_SEND_STALL 1 + unsigned devspd : 2; /*!< 01-00 Device Speed */ + } b; +} dcfg_data_t; + +/*! + \brief Bit fields in the Device Control Register. + */ +typedef union dctl_data +{ + uint32_t d32; + struct + { + unsigned reserved16_31 :16; + unsigned ifrmnum : 1; /*!< 15 Ignore Frame Number for ISOC EPs */ + unsigned gmc : 2; /*!< 14-13 Global Multi Count */ + unsigned gcontbna : 1; /*!< 12 Global Continue on BNA */ + unsigned pwronprgdone : 1; /*!< 11 Power-On Programming Done */ + unsigned cgoutnak : 1; /*!< 10 Clear Global OUT NAK */ + unsigned sgoutnak : 1; /*!< 09 Set Global OUT NAK */ + unsigned cgnpinnak : 1; /*!< 08 Clear Global Non-Periodic IN NAK */ + unsigned sgnpinnak : 1; /*!< 07 Set Global Non-Periodic IN NAK */ + unsigned tstctl : 3; /*!< 06-04 Test Control */ + unsigned goutnaksts : 1; /*!< 03 Global OUT NAK Status */ + unsigned gnpinnaksts : 1; /*!< 02 Global Non-Periodic IN NAK Status */ + unsigned sftdiscon : 1; /*!< 01 Soft Disconnect */ + unsigned rmtwkupsig : 1; /*!< 00 Remote Wakeup */ + } b; +} dctl_data_t; + + +/*! + \brief Bit fields in the Device Status Register. + */ +typedef union dsts_data +{ + uint32_t d32; + struct + { + unsigned reserved22_31 :10; + unsigned soffn :14; /*!< 21-08 Frame or Microframe Number of the received SOF */ + unsigned reserved4_7 : 4; + unsigned errticerr : 1; /*!< 03 Erratic Error */ + unsigned enumspd : 2; /*!< 02-01 Enumerated Speed */ + #define IFXUSB_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 + #define IFXUSB_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 + #define IFXUSB_DSTS_ENUMSPD_LS_PHY_6MHZ 2 + #define IFXUSB_DSTS_ENUMSPD_FS_PHY_48MHZ 3 + unsigned suspsts : 1; /*!< 00 Suspend Status */ + } b; +} dsts_data_t; + +/*! + \brief Bit fields in the Device IN EP Interrupt Register + and the Device IN EP Common Mask Register. + */ +typedef union diepint_data +{ + uint32_t d32; + struct + { + unsigned reserved14_31 :18; + unsigned nakmsk : 1; /*!< 13 NAK interrupt Mask */ + unsigned reserved10_12 : 3; + unsigned bna : 1; /*!< 09 BNA Interrupt mask */ + unsigned txfifoundrn : 1; /*!< 08 Fifo Underrun Mask */ + unsigned emptyintr : 1; /*!< 07 IN Endpoint HAK Effective mask */ + unsigned inepnakeff : 1; /*!< 06 IN Endpoint HAK Effective mask */ + unsigned intknepmis : 1; /*!< 05 IN Token Received with EP mismatch mask */ + unsigned intktxfemp : 1; /*!< 04 IN Token received with TxF Empty mask */ + unsigned timeout : 1; /*!< 03 TimeOUT Handshake mask (non-ISOC EPs) */ + unsigned ahberr : 1; /*!< 02 AHB Error mask */ + unsigned epdisabled : 1; /*!< 01 Endpoint disable mask */ + unsigned xfercompl : 1; /*!< 00 Transfer complete mask */ + } b; +} diepint_data_t; + + +/*! + \brief Bit fields in the Device OUT EP Interrupt Register and + Device OUT EP Common Interrupt Mask Register. + */ +typedef union doepint_data +{ + uint32_t d32; + struct + { + unsigned reserved15_31 :17; + unsigned nyetmsk : 1; /*!< 14 NYET Interrupt */ + unsigned nakmsk : 1; /*!< 13 NAK Interrupt */ + unsigned bbleerrmsk : 1; /*!< 12 Babble Interrupt */ + unsigned reserved10_11 : 2; + unsigned bna : 1; /*!< 09 BNA Interrupt */ + unsigned outpkterr : 1; /*!< 08 OUT packet Error */ + unsigned reserved07 : 1; + unsigned back2backsetup : 1; /*!< 06 Back-to-Back SETUP Packets Received */ + unsigned stsphsercvd : 1; /*!< 05 */ + unsigned outtknepdis : 1; /*!< 04 OUT Token Received when Endpoint Disabled */ + unsigned setup : 1; /*!< 03 Setup Phase Done (contorl EPs) */ + unsigned ahberr : 1; /*!< 02 AHB Error */ + unsigned epdisabled : 1; /*!< 01 Endpoint disable */ + unsigned xfercompl : 1; /*!< 00 Transfer complete */ + } b; +} doepint_data_t; + + +/*! + \brief Bit fields in the Device All EP Interrupt Registers. + */ +typedef union daint_data +{ + uint32_t d32; + struct + { + unsigned out : 16; /*!< 31-16 OUT Endpoint bits */ + unsigned in : 16; /*!< 15-00 IN Endpoint bits */ + } eps; + struct + { + /** OUT Endpoint bits */ + unsigned outep15 : 1; + unsigned outep14 : 1; + unsigned outep13 : 1; + unsigned outep12 : 1; + unsigned outep11 : 1; + unsigned outep10 : 1; + unsigned outep09 : 1; + unsigned outep08 : 1; + unsigned outep07 : 1; + unsigned outep06 : 1; + unsigned outep05 : 1; + unsigned outep04 : 1; + unsigned outep03 : 1; + unsigned outep02 : 1; + unsigned outep01 : 1; + unsigned outep00 : 1; + /** IN Endpoint bits */ + unsigned inep15 : 1; + unsigned inep14 : 1; + unsigned inep13 : 1; + unsigned inep12 : 1; + unsigned inep11 : 1; + unsigned inep10 : 1; + unsigned inep09 : 1; + unsigned inep08 : 1; + unsigned inep07 : 1; + unsigned inep06 : 1; + unsigned inep05 : 1; + unsigned inep04 : 1; + unsigned inep03 : 1; + unsigned inep02 : 1; + unsigned inep01 : 1; + unsigned inep00 : 1; + } ep; +} daint_data_t; + + +/*! + \brief Bit fields in the Device IN Token Queue Read Registers. + */ +typedef union dtknq1_data +{ + uint32_t d32; + struct + { + unsigned epnums0_5 :24; /*!< 31-08 EP Numbers of IN Tokens 0 ... 4 */ + unsigned wrap_bit : 1; /*!< 07 write pointer has wrapped */ + unsigned reserved05_06 : 2; + unsigned intknwptr : 5; /*!< 04-00 In Token Queue Write Pointer */ + }b; +} dtknq1_data_t; + + +/*! + \brief Bit fields in Threshold control Register + */ +typedef union dthrctl_data +{ + uint32_t d32; + struct + { + unsigned reserved26_31 : 6; + unsigned rx_thr_len : 9; /*!< 25-17 Rx Thr. Length */ + unsigned rx_thr_en : 1; /*!< 16 Rx Thr. Enable */ + unsigned reserved11_15 : 5; + unsigned tx_thr_len : 9; /*!< 10-02 Tx Thr. Length */ + unsigned iso_thr_en : 1; /*!< 01 ISO Tx Thr. Enable */ + unsigned non_iso_thr_en : 1; /*!< 00 non ISO Tx Thr. Enable */ + } b; +} dthrctl_data_t; + +/*@}*//*IFXUSB_CSR_DEVICE_GLOBAL_REG*/ + +/****************************************************************************/ + +/*! + \addtogroup IFXUSB_CSR_DEVICE_EP_REG + */ +/*@{*/ + +/*! + \struct ifxusb_dev_in_ep_regs + \brief Device Logical IN Endpoint-Specific Registers. + There will be one set of endpoint registers per logical endpoint + implemented. + each EP's IN EP Register are offset at : + 900h + * (ep_num * 20h) + */ + +typedef struct ifxusb_dev_in_ep_regs +{ + volatile uint32_t diepctl; /*!< 00h: Endpoint Control Register */ + uint32_t reserved04; /*!< 04h: */ + volatile uint32_t diepint; /*!< 08h: Endpoint Interrupt Register */ + uint32_t reserved0C; /*!< 0Ch: */ + volatile uint32_t dieptsiz; /*!< 10h: Endpoint Transfer Size Register.*/ + volatile uint32_t diepdma; /*!< 14h: Endpoint DMA Address Register. */ + volatile uint32_t dtxfsts; /*!< 18h: Endpoint Transmit FIFO Status Register. */ + volatile uint32_t diepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */ +} ifxusb_dev_in_ep_regs_t; + +/*! + \brief Device Logical OUT Endpoint-Specific Registers. + There will be one set of endpoint registers per logical endpoint + implemented. + each EP's OUT EP Register are offset at : + B00h + * (ep_num * 20h) + 00h + */ +typedef struct ifxusb_dev_out_ep_regs +{ + volatile uint32_t doepctl; /*!< 00h: Endpoint Control Register */ + volatile uint32_t doepfn; /*!< 04h: Endpoint Frame number Register */ + volatile uint32_t doepint; /*!< 08h: Endpoint Interrupt Register */ + uint32_t reserved0C; /*!< 0Ch: */ + volatile uint32_t doeptsiz; /*!< 10h: Endpoint Transfer Size Register.*/ + volatile uint32_t doepdma; /*!< 14h: Endpoint DMA Address Register. */ + uint32_t reserved18; /*!< 18h: */ + volatile uint32_t doepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */ +} ifxusb_dev_out_ep_regs_t; + + +/*! + \brief Bit fields in the Device EP Control + Register. + */ +typedef union depctl_data +{ + uint32_t d32; + struct + { + unsigned epena : 1; /*!< 31 Endpoint Enable */ + unsigned epdis : 1; /*!< 30 Endpoint Disable */ + unsigned setd1pid : 1; /*!< 29 Set DATA1 PID (INTR/Bulk IN and OUT endpoints) */ + unsigned setd0pid : 1; /*!< 28 Set DATA0 PID (INTR/Bulk IN and OUT endpoints) */ + unsigned snak : 1; /*!< 27 Set NAK */ + unsigned cnak : 1; /*!< 26 Clear NAK */ + unsigned txfnum : 4; /*!< 25-22 Tx Fifo Number */ + unsigned stall : 1; /*!< 21 Stall Handshake */ + unsigned snp : 1; /*!< 20 Snoop Mode */ + unsigned eptype : 2; /*!< 19-18 Endpoint Type + 0: Control + 1: Isochronous + 2: Bulk + 3: Interrupt + */ + unsigned naksts : 1; /*!< 17 NAK Status */ + unsigned dpid : 1; /*!< 16 Endpoint DPID (INTR/Bulk IN and OUT endpoints) */ + unsigned usbactep : 1; /*!< 15 USB Active Endpoint */ + unsigned nextep : 4; /*!< 14-11 Next Endpoint */ + unsigned mps :11; /*!< 10-00 Maximum Packet Size */ + #define IFXUSB_DEP0CTL_MPS_64 0 + #define IFXUSB_DEP0CTL_MPS_32 1 + #define IFXUSB_DEP0CTL_MPS_16 2 + #define IFXUSB_DEP0CTL_MPS_8 3 + } b; +} depctl_data_t; + + +/*! + \brief Bit fields in the Device EP Transfer Size Register. (EP0 and EPn) + */ +typedef union deptsiz_data +{ + uint32_t d32; + struct + { + unsigned reserved31 : 1; + unsigned supcnt : 2; /*!< 30-29 Setup Packet Count */ + unsigned reserved20_28 : 9; + unsigned pktcnt : 1; /*!< 19 Packet Count */ + unsigned reserved7_18 :12; + unsigned xfersize : 7; /*!< 06-00 Transfer size */ + }b0; + struct + { + unsigned reserved : 1; + unsigned mc : 2; /*!< 30-29 Multi Count */ + unsigned pktcnt :10; /*!< 28-19 Packet Count */ + unsigned xfersize :19; /*!< 18-00 Transfer size */ + } b; +} deptsiz_data_t; + +/*@}*//*IFXUSB_CSR_DEVICE_EP_REG*/ +/****************************************************************************/ + +/*! + \addtogroup IFXUSB_CSR_DEVICE_DMA_DESC + */ +/*@{*/ +/*! + \struct desc_sts_data + \brief Bit fields in the DMA Descriptor status quadlet. + */ +typedef union desc_sts_data +{ + struct + { + unsigned bs : 2; /*!< 31-30 Buffer Status */ + #define BS_HOST_READY 0x0 + #define BS_DMA_BUSY 0x1 + #define BS_DMA_DONE 0x2 + #define BS_HOST_BUSY 0x3 + unsigned sts : 2; /*!< 29-28 Receive/Trasmit Status */ + #define RTS_SUCCESS 0x0 + #define RTS_BUFFLUSH 0x1 + #define RTS_RESERVED 0x2 + #define RTS_BUFERR 0x3 + unsigned l : 1; /*!< 27 Last */ + unsigned sp : 1; /*!< 26 Short Packet */ + unsigned ioc : 1; /*!< 25 Interrupt On Complete */ + unsigned sr : 1; /*!< 24 Setup Packet received */ + unsigned mtrf : 1; /*!< 23 Multiple Transfer */ + unsigned reserved16_22 : 7; + unsigned bytes :16; /*!< 15-00 Transfer size in bytes */ + } b; + uint32_t d32; /*!< DMA Descriptor data buffer pointer */ +} desc_sts_data_t; + +/*@}*//*IFXUSB_CSR_DEVICE_DMA_DESC*/ +/****************************************************************************/ + +/*! + \addtogroup IFXUSB_CSR_HOST_GLOBAL_REG + */ +/*@{*/ +/*! + \struct ifxusb_host_global_regs + \brief IFXUSB Host Mode Global registers. Offsets 400h-7FFh + The ifxusb_host_global_regs structure defines the size + and relative field offsets for the Host Global registers. + These registers are visible only in Host mode and must not be + accessed in Device mode, as the results are unknown. + */ +typedef struct ifxusb_host_global_regs +{ + volatile uint32_t hcfg; /*!< 400h Host Configuration Register. */ + volatile uint32_t hfir; /*!< 404h Host Frame Interval Register. */ + volatile uint32_t hfnum; /*!< 408h Host Frame Number / Frame Remaining Register. */ + uint32_t reserved40C; + volatile uint32_t hptxsts; /*!< 410h Host Periodic Transmit FIFO/ Queue Status Register. */ + volatile uint32_t haint; /*!< 414h Host All Channels Interrupt Register. */ + volatile uint32_t haintmsk; /*!< 418h Host All Channels Interrupt Mask Register. */ +} ifxusb_host_global_regs_t; + +/*! + \brief Bit fields in the Host Configuration Register. + */ +typedef union hcfg_data +{ + uint32_t d32; + struct + { + unsigned reserved31_03 :29; + unsigned fslssupp : 1; /*!< 02 FS/LS Only Support */ + unsigned fslspclksel : 2; /*!< 01-00 FS/LS Phy Clock Select */ + #define IFXUSB_HCFG_30_60_MHZ 0 + #define IFXUSB_HCFG_48_MHZ 1 + #define IFXUSB_HCFG_6_MHZ 2 + } b; +} hcfg_data_t; + +/*! + \brief Bit fields in the Host Frame Interval Register. + */ +typedef union hfir_data +{ + uint32_t d32; + struct + { + unsigned reserved : 16; + unsigned frint : 16; /*!< 15-00 Frame Interval */ + } b; +} hfir_data_t; + +/*! + \brief Bit fields in the Host Frame Time Remaing/Number Register. + */ +typedef union hfnum_data +{ + uint32_t d32; + struct + { + unsigned frrem : 16; /*!< 31-16 Frame Time Remaining */ + unsigned frnum : 16; /*!< 15-00 Frame Number*/ + #define IFXUSB_HFNUM_MAX_FRNUM 0x3FFF + } b; +} hfnum_data_t; + +/*! + \brief Bit fields in the Host Periodic Transmit FIFO/Queue Status Register + */ +typedef union hptxsts_data +{ + /** raw register data */ + uint32_t d32; + struct + { + /** Top of the Periodic Transmit Request Queue + * - bit 24 - Terminate (last entry for the selected channel) + */ + unsigned ptxqtop_odd : 1; /*!< 31 Top of the Periodic Transmit Request + Queue Odd/even microframe*/ + unsigned ptxqtop_chnum : 4; /*!< 30-27 Top of the Periodic Transmit Request + Channel Number */ + unsigned ptxqtop_token : 2; /*!< 26-25 Top of the Periodic Transmit Request + Token Type + 0 - Zero length + 1 - Ping + 2 - Disable + */ + unsigned ptxqtop_terminate : 1; /*!< 24 Top of the Periodic Transmit Request + Terminate (last entry for the selected channel)*/ + unsigned ptxqspcavail : 8; /*!< 23-16 Periodic Transmit Request Queue Space Available */ + unsigned ptxfspcavail :16; /*!< 15-00 Periodic Transmit Data FIFO Space Available */ + } b; +} hptxsts_data_t; + +/*! + \brief Bit fields in the Host Port Control and Status Register. + */ +typedef union hprt0_data +{ + uint32_t d32; + struct + { + unsigned reserved19_31 :13; + unsigned prtspd : 2; /*!< 18-17 Port Speed */ + #define IFXUSB_HPRT0_PRTSPD_HIGH_SPEED 0 + #define IFXUSB_HPRT0_PRTSPD_FULL_SPEED 1 + #define IFXUSB_HPRT0_PRTSPD_LOW_SPEED 2 + unsigned prttstctl : 4; /*!< 16-13 Port Test Control */ + unsigned prtpwr : 1; /*!< 12 Port Power */ + unsigned prtlnsts : 2; /*!< 11-10 Port Line Status */ + unsigned reserved9 : 1; + unsigned prtrst : 1; /*!< 08 Port Reset */ + unsigned prtsusp : 1; /*!< 07 Port Suspend */ + unsigned prtres : 1; /*!< 06 Port Resume */ + unsigned prtovrcurrchng : 1; /*!< 05 Port Overcurrent Change */ + unsigned prtovrcurract : 1; /*!< 04 Port Overcurrent Active */ + unsigned prtenchng : 1; /*!< 03 Port Enable/Disable Change */ + unsigned prtena : 1; /*!< 02 Port Enable */ + unsigned prtconndet : 1; /*!< 01 Port Connect Detected */ + unsigned prtconnsts : 1; /*!< 00 Port Connect Status */ + }b; +} hprt0_data_t; + +/*! + \brief Bit fields in the Host All Interrupt Register. + */ +typedef union haint_data +{ + uint32_t d32; + struct + { + unsigned reserved : 16; + unsigned ch15 : 1; + unsigned ch14 : 1; + unsigned ch13 : 1; + unsigned ch12 : 1; + unsigned ch11 : 1; + unsigned ch10 : 1; + unsigned ch09 : 1; + unsigned ch08 : 1; + unsigned ch07 : 1; + unsigned ch06 : 1; + unsigned ch05 : 1; + unsigned ch04 : 1; + unsigned ch03 : 1; + unsigned ch02 : 1; + unsigned ch01 : 1; + unsigned ch00 : 1; + } b; + struct + { + unsigned reserved : 16; + unsigned chint : 16; + } b2; +} haint_data_t; +/*@}*//*IFXUSB_CSR_HOST_GLOBAL_REG*/ +/****************************************************************************/ +/*! + \addtogroup IFXUSB_CSR_HOST_HC_REG + */ +/*@{*/ +/*! + \brief Host Channel Specific Registers + There will be one set of hc registers per host channelimplemented. + each HC's Register are offset at : + 500h + * (hc_num * 20h) + */ +typedef struct ifxusb_hc_regs +{ + volatile uint32_t hcchar; /*!< 00h Host Channel Characteristic Register.*/ + volatile uint32_t hcsplt; /*!< 04h Host Channel Split Control Register.*/ + volatile uint32_t hcint; /*!< 08h Host Channel Interrupt Register. */ + volatile uint32_t hcintmsk; /*!< 0Ch Host Channel Interrupt Mask Register. */ + volatile uint32_t hctsiz; /*!< 10h Host Channel Transfer Size Register. */ + volatile uint32_t hcdma; /*!< 14h Host Channel DMA Address Register. */ + uint32_t reserved[2]; /*!< 18h Reserved. */ +} ifxusb_hc_regs_t; + + +/*! + \brief Bit fields in the Host Channel Characteristics Register. + */ +typedef union hcchar_data +{ + uint32_t d32; + struct + { + unsigned chen : 1; /*!< 31 Channel enable */ + unsigned chdis : 1; /*!< 30 Channel disable */ + unsigned oddfrm : 1; /*!< 29 Frame to transmit periodic transaction */ + unsigned devaddr : 7; /*!< 28-22 Device address */ + unsigned multicnt : 2; /*!< 21-20 Packets per frame for periodic transfers */ + unsigned eptype : 2; /*!< 19-18 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ + unsigned lspddev : 1; /*!< 17 0: Full/high speed device, 1: Low speed device */ + unsigned reserved : 1; + unsigned epdir : 1; /*!< 15 0: OUT, 1: IN */ + unsigned epnum : 4; /*!< 14-11 Endpoint number */ + unsigned mps :11; /*!< 10-00 Maximum packet size in bytes */ + } b; +} hcchar_data_t; + +/*! + \brief Bit fields in the Host Channel Split Control Register + */ +typedef union hcsplt_data +{ + uint32_t d32; + struct + { + unsigned spltena : 1; /*!< 31 Split Enble */ + unsigned reserved :14; + unsigned compsplt : 1; /*!< 16 Do Complete Split */ + unsigned xactpos : 2; /*!< 15-14 Transaction Position */ + #define IFXUSB_HCSPLIT_XACTPOS_MID 0 + #define IFXUSB_HCSPLIT_XACTPOS_END 1 + #define IFXUSB_HCSPLIT_XACTPOS_BEGIN 2 + #define IFXUSB_HCSPLIT_XACTPOS_ALL 3 + unsigned hubaddr : 7; /*!< 13-07 Hub Address */ + unsigned prtaddr : 7; /*!< 06-00 Port Address */ + } b; +} hcsplt_data_t; + +/*! + \brief Bit fields in the Host Interrupt Register. + */ +typedef union hcint_data +{ + uint32_t d32; + struct + { + unsigned reserved :21; + unsigned datatglerr : 1; /*!< 10 Data Toggle Error */ + unsigned frmovrun : 1; /*!< 09 Frame Overrun */ + unsigned bblerr : 1; /*!< 08 Babble Error */ + unsigned xacterr : 1; /*!< 07 Transaction Err */ + unsigned nyet : 1; /*!< 06 NYET Response Received */ + unsigned ack : 1; /*!< 05 ACK Response Received */ + unsigned nak : 1; /*!< 04 NAK Response Received */ + unsigned stall : 1; /*!< 03 STALL Response Received */ + unsigned ahberr : 1; /*!< 02 AHB Error */ + unsigned chhltd : 1; /*!< 01 Channel Halted */ + unsigned xfercomp : 1; /*!< 00 Channel Halted */ + }b; +} hcint_data_t; + + +/*! + \brief Bit fields in the Host Channel Transfer Size + Register. + */ +typedef union hctsiz_data +{ + uint32_t d32; + struct + { + /** */ + unsigned dopng : 1; /*!< 31 Do PING protocol when 1 */ + /** + * Packet ID for next data packet + * 0: DATA0 + * 1: DATA2 + * 2: DATA1 + * 3: MDATA (non-Control), SETUP (Control) + */ + unsigned pid : 2; /*!< 30-29 Packet ID for next data packet + 0: DATA0 + 1: DATA2 + 2: DATA1 + 3: MDATA (non-Control), SETUP (Control) + */ + #define IFXUSB_HCTSIZ_DATA0 0 + #define IFXUSB_HCTSIZ_DATA1 2 + #define IFXUSB_HCTSIZ_DATA2 1 + #define IFXUSB_HCTSIZ_MDATA 3 + #define IFXUSB_HCTSIZ_SETUP 3 + unsigned pktcnt :10; /*!< 28-19 Data packets to transfer */ + unsigned xfersize :19; /*!< 18-00 Total transfer size in bytes */ + }b; +} hctsiz_data_t; + +/*@}*//*IFXUSB_CSR_HOST_HC_REG*/ + +/****************************************************************************/ + +/*! + \addtogroup IFXUSB_CSR_PWR_CLK_GATING_REG + */ +/*@{*/ +/*! + \brief Bit fields in the Power and Clock Gating Control Register + */ +typedef union pcgcctl_data +{ + uint32_t d32; + struct + { + unsigned reserved : 27; + unsigned physuspended : 1; /*!< 04 PHY Suspended */ + unsigned rstpdwnmodule : 1; /*!< 03 Reset Power Down Modules */ + unsigned pwrclmp : 1; /*!< 02 Power Clamp */ + unsigned gatehclk : 1; /*!< 01 Gate Hclk */ + unsigned stoppclk : 1; /*!< 00 Stop Pclk */ + } b; +} pcgcctl_data_t; +/*@}*//*IFXUSB_CSR_PWR_CLK_GATING_REG*/ + +/****************************************************************************/ + +#endif //__IFXUSB_REGS_H__ diff --git a/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_version.h b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_version.h new file mode 100644 index 0000000000..2dff7354e5 --- /dev/null +++ b/target/linux/lantiq/files-3.3/drivers/usb/ifxhcd/ifxusb_version.h @@ -0,0 +1,5 @@ + +#ifndef IFXUSB_VERSION +#define IFXUSB_VERSION "3.0alpha B100312" +#endif + diff --git a/target/linux/lantiq/files-3.3/include/linux/svip_nat.h b/target/linux/lantiq/files-3.3/include/linux/svip_nat.h new file mode 100644 index 0000000000..6563c38d58 --- /dev/null +++ b/target/linux/lantiq/files-3.3/include/linux/svip_nat.h @@ -0,0 +1,37 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + Am Campeon 1-12; 81726 Munich, Germany + + THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE, + WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS + SOFTWARE IS FREE OF CHARGE. + + THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS + ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING + WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP, + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE + OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD + PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL + PROPERTY INFRINGEMENT. + + EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT + FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM + OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. +*******************************************************************************/ +#ifndef _SVIP_NAT_H +#define _SVIP_NAT_H + +/* The declarations here have to be in a header file, because + * they need to be known both to the kernel module + * (in chardev.c) and the process calling ioctl (ioctl.c) + */ +#include <linux/svip_nat_io.h> + +#define SVIP_NAT_VERSION "3.1" +extern int do_SVIP_NAT(struct sk_buff *); + +#endif diff --git a/target/linux/lantiq/files-3.3/include/linux/svip_nat_io.h b/target/linux/lantiq/files-3.3/include/linux/svip_nat_io.h new file mode 100644 index 0000000000..bf42dd4ee3 --- /dev/null +++ b/target/linux/lantiq/files-3.3/include/linux/svip_nat_io.h @@ -0,0 +1,103 @@ +/****************************************************************************** + + Copyright (c) 2007 + Infineon Technologies AG + Am Campeon 1-12; 81726 Munich, Germany + + THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE, + WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS + SOFTWARE IS FREE OF CHARGE. + + THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS + ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING + WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP, + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE + OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD + PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL + PROPERTY INFRINGEMENT. + + EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT + FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM + OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + *******************************************************************************/ +#ifndef _SVIP_NAT_IO_H_ +#define _SVIP_NAT_IO_H_ + +#include <asm/ioctl.h> + +#define SVIP_NAT_DEVICE_NAME "svip_nat" +#define PATH_SVIP_NAT_DEVICE_NAME "/dev/"SVIP_NAT_DEVICE_NAME + +#define MAJOR_NUM_SVIP_NAT 10 +#define MINOR_NUM_SVIP_NAT 120 + +/** maximum SVIP devices supported on a Line card system */ +#define SVIP_SYS_NUM 12 + +/** maximum voice packet channels possible per SVIP device */ +#define SVIP_CODEC_NUM 16 + +/** start UDP port number of the SVIP Linecard System */ +#define SVIP_UDP_FROM 50000 + +/** @defgroup SVIP_NATAPI SVIP Custom NAT ioctl interface. + An ioctl interface is provided to add a rule into the SVIP NAT table and + to respectively remove the rule form it. The ioctl interface is accessible + using the fd issued upon opening the special device node /dev/svip_nat. + @{ */ + +/** Used to add a new rule to the SVIP Custom NAT table. If a rule already + exists for the target UDP port, that rule shall be overwritten. + + \param SVIP_NAT_IO_Rule_t* The parameter points to a + \ref SVIP_NAT_IO_Rule_t structure. + */ +#define FIO_SVIP_NAT_RULE_ADD \ + _IOW(MAJOR_NUM_SVIP_NAT, 1, SVIP_NAT_IO_Rule_t) + +/** Used to remove a rule from the SVIP Custom NAT table. No check is + performed whether the rule already exists or not. The remove operation is + performed as long as the target UDP port is within the defined port range. + + \param SVIP_NAT_IO_Rule_t* The parameter points to a + \ref SVIP_NAT_IO_Rule_t structure. + */ +#define FIO_SVIP_NAT_RULE_REMOVE \ + _IOW(MAJOR_NUM_SVIP_NAT, 2, SVIP_NAT_IO_Rule_t) + +/** Used to list all rules in the SVIP Custom NAT table. + + \param <none> + */ +#define FIO_SVIP_NAT_RULE_LIST \ + _IO(MAJOR_NUM_SVIP_NAT, 3) + +/** IP address in network-byte order */ +typedef u32 SVIP_IP_ADDR_t; +/** UDP port in network-byte order */ +typedef u16 SVIP_UDP_PORT_t; + +#ifndef ETH_ALEN +#define ETH_ALEN 6 /* Octets in one ethernet address */ +#endif + +/** NAT parameters part of the NAT table. + These paramters are configurable through the NAT API. */ +typedef struct SVIP_NAT_IO_Rule +{ + /** Remote peer, IP address */ + SVIP_IP_ADDR_t remIP; + /** Remote peer, MAC address */ + u8 remMAC[ETH_ALEN]; + /** Target SVIP, IP address (local peer) */ + SVIP_IP_ADDR_t locIP; + /** Target SVIP, MAC address */ + u8 locMAC[ETH_ALEN]; + /** Target SVIP, UDP port number */ + SVIP_UDP_PORT_t locUDP; +} SVIP_NAT_IO_Rule_t; + +/** @} */ +#endif diff --git a/target/linux/lantiq/files-3.3/net/ipv4/svip_nat.c b/target/linux/lantiq/files-3.3/net/ipv4/svip_nat.c new file mode 100644 index 0000000000..04a0d223a2 --- /dev/null +++ b/target/linux/lantiq/files-3.3/net/ipv4/svip_nat.c @@ -0,0 +1,1569 @@ +/****************************************************************************** + + Copyright (c) 2009 + Lantiq Deutschland GmbH + Am Campeon 3; 81726 Munich, Germany + + THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE, + WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS + SOFTWARE IS FREE OF CHARGE. + + THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS + ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING + WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP, + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE + OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD + PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL + PROPERTY INFRINGEMENT. + + EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT + FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM + OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + **************************************************************************** + +Description : This file contains implementation of Custom NAT function +for Infineon's VINETIC-SVIP16 + *******************************************************************************/ + +#include <linux/module.h> +#include <linux/netfilter_ipv4.h> +#include <linux/if_ether.h> +#include <linux/netdevice.h> +#include <linux/inetdevice.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/if_vlan.h> +#include <linux/udp.h> +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/proc_fs.h> +#include <linux/in6.h> /* just to shut up a warning */ +#include <linux/miscdevice.h> +#include <asm/checksum.h> + +#include <linux/svip_nat.h> + +MODULE_AUTHOR("Lantiq Deutschland GmbH"); +MODULE_DESCRIPTION("SVIP Network Address Translation module"); +MODULE_LICENSE("GPL"); + +#define SVIP_NAT_INFO_STR "@(#)SVIP NAT, version "SVIP_NAT_VERSION + +/** maximum voice packet channels possible on the SVIP LC system + (equals maximum number of Codec channels possible) */ +#define SVIP_SYS_CODEC_NUM ((SVIP_SYS_NUM) * (SVIP_CODEC_NUM)) + +/** end UDP port number of the SVIP Linecard System */ +#define SVIP_UDP_TO ((SVIP_UDP_FROM) + (SVIP_SYS_CODEC_NUM) - 1) + +/** end UDP port number of the Master SVIP in SVIP Linecard System */ +#define SVIP_UDP_TO_VOFW0 ((SVIP_UDP_FROM) + (SVIP_CODEC_NUM) - 1) + +#define SVIP_PORT_INRANGE(nPort) \ + ((nPort) >= (SVIP_UDP_FROM) && (nPort) <= (SVIP_UDP_TO)) + +#define SVIP_PORT_INDEX(nPort) (nPort - SVIP_UDP_FROM) + +#define SVIP_NET_DEV_ETH0_IDX 0 +#define SVIP_NET_DEV_VETH0_IDX 1 +#define SVIP_NET_DEV_LO_IDX 2 + +#define SVIP_NET_DEV_ETH0_NAME "eth0" +#define SVIP_NET_DEV_ETH1_NAME "eth1" +#define SVIP_NET_DEV_VETH1_NAME "veth0" +#define SVIP_NET_DEV_LO_NAME "lo" + +#define SVIP_NAT_STATS_LOC2REM 0 +#define SVIP_NAT_STATS_REM2LOC 1 +#define SVIP_NAT_STATS_TYPES 2 + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) +#define SVIP_NAT_FOR_EACH_NETDEV(d) for_each_netdev(&init_net, dev) +#define SVIP_NAT_IP_HDR(ethhdr) ip_hdr(ethhdr) +#else +#define SVIP_NAT_FOR_EACH_NETDEV(d) for(d=dev_base; dev; dev = dev->next) +#define SVIP_NAT_IP_HDR(ethhdr) (ethhdr)->nh.iph +#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) +#define SVIP_NAT_SKB_MAC_HEADER(ethhdr) (ethhdr)->mac.ethernet +#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) +#define SVIP_NAT_SKB_MAC_HEADER(ethhdr) (ethhdr)->mac.raw +#else +#define SVIP_NAT_SKB_MAC_HEADER(ethhdr) skb_mac_header(ethhdr) +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) +#define VLAN_DEV_REAL_DEV(dev) vlan_dev_real_dev(dev) +#define VLAN_DEV_VLAN_ID(dev) vlan_dev_vlan_id(dev) +#else +#define VLAN_DEV_REAL_DEV(dev) (VLAN_DEV_INFO(dev)->real_dev) +#define VLAN_DEV_VLAN_ID(dev) (VLAN_DEV_INFO(dev)->vlan_id) +#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) */ + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) +#define MOD_INC_USE_COUNT +#define MOD_DEC_USE_COUNT +#endif + +#if ! ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && \ + (defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE))) +#define VLAN_8021Q_UNUSED +#endif + + +extern spinlock_t vlan_group_lock; +extern struct net_device *__vlan_find_dev_deep(struct net_device *real_dev, unsigned short VID); + +typedef struct SVIP_NAT_stats +{ + unsigned long inPackets; + unsigned long outPackets; + unsigned long outErrors; +} SVIP_NAT_stats_t; + +typedef struct SVIP_NAT_table_entry +{ + SVIP_NAT_IO_Rule_t natRule; + SVIP_NAT_stats_t natStats[SVIP_NAT_STATS_TYPES]; +} SVIP_NAT_table_entry_t; + +/* pointer to the SVIP NAT table */ +static SVIP_NAT_table_entry_t *pNatTable = NULL; + +struct net_device *net_devs[3]; +static u32 *paddr_eth0; +static u32 *paddr_eth0_0; +static u32 *paddr_veth0; +static u32 *pmask_veth0; + +static struct semaphore *sem_nat_tbl_access; +static int proc_read_in_progress = 0; + +static int nDeviceOpen = 0; + +/* saves the NAT table index between subsequent invocation */ +static int nProcReadIdx = 0; + +static long SVIP_NAT_device_ioctl(struct file *,unsigned int ,unsigned long); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) +static int SVIP_NAT_device_release (struct inode *,struct file *); +#else +static void SVIP_NAT_device_release (struct inode *,struct file *); +#endif +static int SVIP_NAT_device_open (struct inode *,struct file *); + +/* This structure holds the interface functions supported by + the SVIP NAT configuration device. */ +struct file_operations SVIP_NAT_Fops = { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) +owner: THIS_MODULE, +#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0) */ + llseek: NULL, /* seek */ + read: NULL, + write: NULL, + readdir: NULL, /* readdir */ + poll: NULL, /* select */ + unlocked_ioctl: SVIP_NAT_device_ioctl, /* ioctl */ + mmap: NULL, /* mmap */ + open: SVIP_NAT_device_open, /* open, */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) + flush: NULL, /* flush */ +#endif + release: SVIP_NAT_device_release /* close */ +}; + +/** Structure holding MISC module operations */ +static struct miscdevice SVIP_NAT_miscdev = +{ +minor: MINOR_NUM_SVIP_NAT, + name: SVIP_NAT_DEVICE_NAME, + fops: &SVIP_NAT_Fops +}; + +#ifdef CONFIG_SVIP_FW_PKT_SNIFFER +int nSVIP_NAT_Sniffer; +unsigned char pSVIP_NAT_SnifferMAC[ETH_ALEN]; +int nSVIP_NAT_SnifferMacSet; +#endif + +/******************************************************************************/ +/** + Function to read /proc/net/svip_nat/nat proc entry + + \arguments + page - pointer to page buffer + start - pointer to start address pointer + off - offset + count - maximum data length to read + eof - end of file flag + data - proc read data (provided by the function + pointed to by data) + + \return + length of read data + + \remarks: + Each call of this routine forces a copy_to_user of the data returned by + 'fn'. This routine will be called by the user until 'len = 0'. + ****************************************************************************/ +static int SVIP_NAT_ProcRead (char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + unsigned long flags; + int (*fn)(char *buf, int size); + int len; + + /* If the NAT table index is negative, the reading has completed */ + if (nProcReadIdx < 0) + { + nProcReadIdx = 0; + *eof = 1; + proc_read_in_progress = 0; + up(sem_nat_tbl_access); + return 0; + } + + local_irq_save(flags); + if (!proc_read_in_progress) + { + proc_read_in_progress = 1; + local_irq_restore(flags); + /* we use this semaphore in order to ensure no other party(could be ioctl + FIO_SVIP_NAT_RULE_LIST), uses function SVIP_NAT_ProcReadNAT(), during + the time read of the proc file takes place */ + down(sem_nat_tbl_access); + } + else + { + local_irq_restore(flags); + } + + if (data != NULL) + { + fn = data; + len = fn (page, count); + /* In this setup each read of the proc entries returns the read data by + 'fn' to the user. The user keeps issuing read requests as long as the + returned value of 'len' is greater than zero. */ + *eof = 1; + *start = page; + } + else + { + len = 0; + } + + return len; +} + +#ifdef CONFIG_SVIP_FW_PKT_SNIFFER +/** + Function to read remaining proc entries + */ +static int SVIP_NAT_ProcReadGen (char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int (*fn)(char *buf, int size); + int len = 0; + + MOD_INC_USE_COUNT; + + if (data == NULL) + { + MOD_DEC_USE_COUNT; + return 0; + } + + fn = data; + len = fn (page, count); + + if (len <= off + count) + { + *eof = 1; + } + *start = page + off; + len -= off; + if (len > count) + { + len = count; + } + if (len < 0) + { + len = 0; + } + + MOD_DEC_USE_COUNT; + + return len; +} +#endif + +/******************************************************************************/ +/** + Function for setting up /proc/net/svip_nat read data + + \arguments + buf - pointer to read buffer + count - size of read buffer + + \return + length of read data into buffer + + \remarks: + The global variable 'nProcReadIdx' is used to save the table index where + the reading of the NAT table stopped. Reading is stopped when the end of + the read buffer is approached. On the next itteration the reading continues + from the saved index. + *******************************************************************************/ +static int SVIP_NAT_ProcReadNAT(char *buf, int count) +{ + int i, j; + int len = 0; + SVIP_NAT_IO_Rule_t *pNatRule; + + if (nProcReadIdx == -1) + { + nProcReadIdx = 0; + return 0; + } + + if (nProcReadIdx == 0) + { + len = sprintf(buf+len, + "Remote host IP " /* 16 char */ + "Remote host MAC " /* 19 char */ + "Local host IP " /* 15 char */ + "Local host MAC " /* 19 char */ + "Local host UDP " /* 16 char */ + "Loc->Rem(in/out/err) " /* 22 char */ + "Rem->Loc(in/out/err)\n\r"); + } + + for (i = nProcReadIdx; i < SVIP_SYS_CODEC_NUM; i++) + { + int slen; + + pNatRule = &pNatTable[i].natRule; + + if (pNatRule->remIP != 0) + { + /* make sure not to overwrite the buffer */ + if (count < len+120) + break; + + /* remIP */ + slen = sprintf(buf+len, "%d.%d.%d.%d", + (int)((pNatRule->remIP >> 24) & 0xff), + (int)((pNatRule->remIP >> 16) & 0xff), + (int)((pNatRule->remIP >> 8) & 0xff), + (int)((pNatRule->remIP >> 0) & 0xff)); + len += slen; + for (j = 0; j < (16-slen); j++) + len += sprintf(buf+len, " "); + + /* remMAC */ + slen = 0; + for (j = 0; j < ETH_ALEN; j++) + { + slen += sprintf(buf+len+slen, "%02x%s", + pNatRule->remMAC[j], j < ETH_ALEN-1 ? ":" : " "); + } + len += slen; + for (j = 0; j < (19-slen); j++) + len += sprintf(buf+len, " "); + + /* locIP */ + slen = sprintf(buf+len, "%d.%d.%d.%d", + (int)((pNatRule->locIP >> 24) & 0xff), + (int)((pNatRule->locIP >> 16) & 0xff), + (int)((pNatRule->locIP >> 8) & 0xff), + (int)((pNatRule->locIP >> 0) & 0xff)); + len += slen; + for (j = 0; j < (15-slen); j++) + len += sprintf(buf+len, " "); + + /* locMAC */ + slen = 0; + for (j = 0; j < ETH_ALEN; j++) + { + slen += sprintf(buf+len+slen, "%02x%s", + pNatRule->locMAC[j], j < ETH_ALEN-1 ? ":" : " "); + } + len += slen; + for (j = 0; j < (19-slen); j++) + len += sprintf(buf+len, " "); + + /* locUDP */ + slen = sprintf(buf+len, "%d", pNatRule->locUDP); + len += slen; + for (j = 0; j < (16-slen); j++) + len += sprintf(buf+len, " "); + + /* NAT statistics, Local to Remote translation */ + slen = sprintf(buf+len, "(%ld/%ld/%ld)", + pNatTable[i].natStats[SVIP_NAT_STATS_LOC2REM].inPackets, + pNatTable[i].natStats[SVIP_NAT_STATS_LOC2REM].outPackets, + pNatTable[i].natStats[SVIP_NAT_STATS_LOC2REM].outErrors); + len += slen; + for (j = 0; j < (22-slen); j++) + len += sprintf(buf+len, " "); + + /* NAT statistics, Remote to Local translation */ + len += sprintf(buf+len, "(%ld/%ld/%ld)\n\r", + pNatTable[i].natStats[SVIP_NAT_STATS_REM2LOC].inPackets, + pNatTable[i].natStats[SVIP_NAT_STATS_REM2LOC].outPackets, + pNatTable[i].natStats[SVIP_NAT_STATS_REM2LOC].outErrors); + } + } + if (i == SVIP_SYS_CODEC_NUM) + nProcReadIdx = -1; /* reading completed */ + else + nProcReadIdx = i; /* reading still in process, buffer was full */ + + return len; +} + +#ifdef CONFIG_SVIP_FW_PKT_SNIFFER +/** + Converts MAC address from ascii to hex respesentaion + */ +static int SVIP_NAT_MacAsciiToHex(const char *pMacStr, unsigned char *pMacHex) +{ + int i=0, c=0, b=0, n=0; + + memset(pMacHex, 0, ETH_ALEN); + while (pMacStr[i] != '\0') + { + if (n >= 0) + { + unsigned char nToHex = 0; + + /* check for hex digit */ + if (pMacStr[i] >= '0' && pMacStr[i] <= '9') + nToHex = 0x30; + else if (pMacStr[i] >= 'a' && pMacStr[i] <= 'f') + nToHex = 0x57; + else if (pMacStr[i] >= 'A' && pMacStr[i] <= 'F') + nToHex = 0x37; + else + { + if (n != 0) + { + printk(KERN_ERR "SVIP NAT: invalid MAC address format[%s]\n", pMacStr); + return -1; + } + i++; + continue; + } + n^=1; + pMacHex[b] |= ((pMacStr[i] - nToHex)&0xf) << (4*n); + if (n == 0) + { + /* advance to next byte, check if complete */ + if (++b >= ETH_ALEN) + return 0; + /* byte completed, next we expect a colon... */ + c = 1; + /* and, do not check for hex digit */ + n = -1; + } + i++; + continue; + } + if (c == 1) + { + if (pMacStr[i] == ':') + { + /* next we expect hex digit, again */ + n = 0; + } + else + { + printk(KERN_ERR "SVIP NAT: invalid MAC address format[%s]\n", pMacStr); + return -1; + } + } + i++; + } + return 0; +} + +/** + Used to set the destination MAC address of a host where incoming + SVIP VoFW packets are to be addressed. In case the address is set + to 00:00:00:00:00:00 (the default case), the packets will written + out to eth0 with its original MAC addess. + + \remark +usage: 'echo "00:03:19:00:15:D1" > cat /proc/net/svip_nat/snifferMAC' +*/ +int SVIP_NAT_ProcWriteSnifferMAC (struct file *file, const char *buffer, + unsigned long count, void *data) +{ + /* at least strlen("xx:xx:xx:xx:xx:xx") characters, followed by '\0' */ + if (count >= 18) + { + int ret; + + ret = SVIP_NAT_MacAsciiToHex(buffer, pSVIP_NAT_SnifferMAC); + + if (ret != 0) + return 0; + + if (!(pSVIP_NAT_SnifferMAC[0]==0 && pSVIP_NAT_SnifferMAC[1]==0 && + pSVIP_NAT_SnifferMAC[2]==0 && pSVIP_NAT_SnifferMAC[3]==0 && + pSVIP_NAT_SnifferMAC[4]==0 && pSVIP_NAT_SnifferMAC[5]==0)) + { + nSVIP_NAT_SnifferMacSet = 1; + } + } + return count; +} + +/** + Used to read the destination MAC address of a sniffer host + */ +int SVIP_NAT_ProcReadSnifferMAC (char *buf, int count) +{ + int len = 0; + + len = snprintf(buf, count, "%02x:%02x:%02x:%02x:%02x:%02x\n", + pSVIP_NAT_SnifferMAC[0], pSVIP_NAT_SnifferMAC[1], + pSVIP_NAT_SnifferMAC[2], pSVIP_NAT_SnifferMAC[3], + pSVIP_NAT_SnifferMAC[4], pSVIP_NAT_SnifferMAC[5]); + + if (len > count) + { + printk(KERN_ERR "SVIP NAT: Only part of the text could be put into the buffer\n"); + return count; + } + + return len; +} + +/** + Used to switch VoFW message sniffer on/off + + \remark +usage: 'echo "1" > cat /proc/net/svip_nat/snifferOnOff' +*/ +int SVIP_NAT_ProcWriteSnifferOnOff (struct file *file, const char *buffer, + unsigned long count, void *data) +{ + /* at least one digit expected, followed by '\0' */ + if (count >= 2) + { + int ret, nSnifferOnOff; + + ret = sscanf(buffer, "%d", &nSnifferOnOff); + + if (ret != 1) + return count; + + if (nSnifferOnOff > 0) + nSnifferOnOff = 1; + + nSVIP_NAT_Sniffer = nSnifferOnOff; + } + return count; +} + +/** + Used to read the VoFW message sniffer configuration (on/off) + */ +int SVIP_NAT_ProcReadSnifferOnOff (char *buf, int count) +{ + int len = 0; + + len = snprintf(buf, count, "%d\n", nSVIP_NAT_Sniffer); + + if (len > count) + { + printk(KERN_ERR "SVIP NAT: Only part of the text could be put into the buffer\n"); + return count; + } + + return len; +} +#endif + +/******************************************************************************/ +/** + Creates proc read/write entries + + \return + 0 on success, -1 on error + */ +/******************************************************************************/ +static int SVIP_NAT_ProcInstall(void) +{ + struct proc_dir_entry *pProcParentDir, *pProcDir; + struct proc_dir_entry *pProcNode; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) + pProcParentDir = proc_net; +#else + pProcParentDir = init_net.proc_net; +#endif + pProcDir = proc_mkdir(SVIP_NAT_DEVICE_NAME, pProcParentDir); + if (pProcDir == NULL) + { + printk(KERN_ERR "SVIP NAT: cannot create proc dir %s/%s\n\r", + pProcParentDir->name, SVIP_NAT_DEVICE_NAME); + return -1; + } + + pProcNode = create_proc_read_entry("nat", S_IFREG|S_IRUGO, pProcDir, + SVIP_NAT_ProcRead, (void *)SVIP_NAT_ProcReadNAT); + if (pProcNode == NULL) + { + printk(KERN_ERR "SVIP NAT: cannot create proc entry %s/%s", + pProcDir->name, "nat"); + return -1; + } + +#ifdef CONFIG_SVIP_FW_PKT_SNIFFER + nSVIP_NAT_Sniffer = 0; + /* creates proc entry for switching on/off sniffer to VoFW messages */ + pProcNode = create_proc_read_entry("snifferOnOff", S_IFREG|S_IRUGO|S_IWUGO, + pProcDir, SVIP_NAT_ProcReadGen, (void *)SVIP_NAT_ProcReadSnifferOnOff); + if (pProcNode == NULL) + { + printk(KERN_ERR "SVIP NAT: cannot create proc entry %s/%s\n\r", + pProcDir->name, "snifferOnOff"); + return -1; + } + pProcNode->write_proc = SVIP_NAT_ProcWriteSnifferOnOff; + + memset (pSVIP_NAT_SnifferMAC, 0, ETH_ALEN); + nSVIP_NAT_SnifferMacSet = 0; + /* creates proc entry for setting MAC address of sniffer host to VoFW messages */ + pProcNode = create_proc_read_entry("snifferMAC", S_IFREG|S_IRUGO|S_IWUGO, + pProcDir, SVIP_NAT_ProcReadGen, (void *)SVIP_NAT_ProcReadSnifferMAC); + if (pProcNode == NULL) + { + printk(KERN_ERR "SVIP NAT: cannot create proc entry %s/%s\n\r", + pProcDir->name, "snifferMAC"); + return -1; + } + pProcNode->write_proc = SVIP_NAT_ProcWriteSnifferMAC; +#endif + + return 0; +} + +/******************************************************************************/ +/** + No actions done here, simply a check is performed if an open has already + been performed. Currently only a single open is allowed as it is a sufficient + to have hat a single process configuring the SVIP NAT at one time. + + \arguments + inode - pointer to disk file data + file - pointer to device file data + + \return + 0 on success, else -1 + */ +/******************************************************************************/ +static int SVIP_NAT_device_open(struct inode *inode, struct file *file) +{ + unsigned long flags; + struct in_device *in_dev; + struct in_ifaddr *ifa; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + local_irq_save(flags); +#else + local_save_flags(flags); +#endif + + if (nDeviceOpen) + { + MOD_INC_USE_COUNT; + local_irq_restore(flags); + nDeviceOpen++; + return 0; + } + + /* find pointer to IP address of eth0 */ + if ((in_dev=in_dev_get(net_devs[SVIP_NET_DEV_ETH0_IDX])) != NULL) + { + for (ifa = in_dev->ifa_list; ifa != NULL; ifa = ifa->ifa_next) + { + if (!paddr_eth0 && ifa->ifa_address != 0) + { + paddr_eth0 = &ifa->ifa_address; + continue; + } + if (paddr_eth0 && ifa->ifa_address != 0) + { + paddr_eth0_0 = &ifa->ifa_address; + break; + } + } + in_dev_put(in_dev); + } + if (paddr_eth0 == NULL || paddr_eth0_0 == NULL) + { + local_irq_restore(flags); + return -ENODATA; + } + + /* find pointer to IP address of veth0 */ + if ((in_dev=in_dev_get(net_devs[SVIP_NET_DEV_VETH0_IDX])) != NULL) + { + for (ifa = in_dev->ifa_list; ifa != NULL; ifa = ifa->ifa_next) + { + if (ifa->ifa_address != 0) + { + paddr_veth0 = &ifa->ifa_address; + pmask_veth0 = &ifa->ifa_mask; + break; + } + } + in_dev_put(in_dev); + } + if (paddr_veth0 == NULL) + { + local_irq_restore(flags); + return -ENODATA; + } + + MOD_INC_USE_COUNT; + nDeviceOpen++; + local_irq_restore(flags); + + return 0; +} + + +/******************************************************************************/ +/** + This function is called when a process closes the SVIP NAT device file + + \arguments + inode - pointer to disk file data + file - pointer to device file data + + \return + 0 on success, else -1 + +*/ +/******************************************************************************/ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) +static int SVIP_NAT_device_release(struct inode *inode, + struct file *file) +#else +static void SVIP_NAT_device_release(struct inode *inode, + struct file *file) +#endif +{ + unsigned long flags; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + save_flags(flags); + cli(); +#else + local_save_flags(flags); +#endif + + /* The device can now be openned by the next caller */ + nDeviceOpen--; + + MOD_DEC_USE_COUNT; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + restore_flags(flags); +#else + local_irq_restore(flags); +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0) + return 0; +#endif +} + + +/******************************************************************************/ +/** + This function is called when a process closes the SVIP NAT device file + + \arguments + inode - pointer to disk file data + file - pointer to device file data + ioctl_num - ioctl number requested + ioctl_param - pointer to data related to the ioctl number + + \return + 0 on success, else -1 + +*/ +/******************************************************************************/ +long SVIP_NAT_device_ioctl (struct file *file, + unsigned int ioctl_num, unsigned long ioctl_param) +{ + int ret = 0; + SVIP_NAT_IO_Rule_t *pNatRule, *pNatRuleIn; + SVIP_UDP_PORT_t nPort; + int nNatIdx; + int bWrite = 0; + int bRead = 0; + unsigned char *pData = 0; + int nSize; + + if (_IOC_DIR(ioctl_num) & _IOC_WRITE) + bWrite = 1; + if (_IOC_DIR(ioctl_num) & _IOC_READ) + bRead = 1; + nSize = _IOC_SIZE(ioctl_num); + + if (nSize > sizeof(int)) + { + if (bRead || bWrite) + { + pData = kmalloc (nSize, GFP_KERNEL); + if (bWrite) + { + if (copy_from_user ((void *)pData, (void *)ioctl_param, nSize) != 0) + { + printk(KERN_ERR "SVIP NAT: ioctl %x: copy_from_user() failed!\n", ioctl_num); + ret = -1; + goto error; + } + } + } + } + + switch (ioctl_num) + { + case FIO_SVIP_NAT_RULE_ADD: + + pNatRuleIn = (SVIP_NAT_IO_Rule_t *)pData; + + /* check if destination UDP port is within range */ + nPort = ntohs(pNatRuleIn->locUDP); + + if (!SVIP_PORT_INRANGE(nPort)) + { + printk(KERN_ERR "SVIP NAT: Error, UDP port(%d) is out of range(%d..%d)\n", + nPort, SVIP_UDP_FROM, SVIP_UDP_TO); + ret = -1; + goto error; + } + nNatIdx = SVIP_PORT_INDEX(nPort); + + down(sem_nat_tbl_access); + pNatRule = &pNatTable[nNatIdx].natRule; + + /* add rule to the NAT table */ + pNatRule->remIP = pNatRuleIn->remIP; + memcpy((char *)pNatRule->remMAC, (char *)pNatRuleIn->remMAC, ETH_ALEN); + pNatRule->locIP = pNatRuleIn->locIP; + memcpy((char *)pNatRule->locMAC, (char *)pNatRuleIn->locMAC, ETH_ALEN); + pNatRule->locUDP = pNatRuleIn->locUDP; + + memset(pNatTable[nNatIdx].natStats, 0, + sizeof(SVIP_NAT_stats_t)*SVIP_NAT_STATS_TYPES); + up(sem_nat_tbl_access); + break; + + case FIO_SVIP_NAT_RULE_REMOVE: + + pNatRuleIn = (SVIP_NAT_IO_Rule_t *)pData; + + /* check if destination UDP port is within range */ + nPort = ntohs(pNatRuleIn->locUDP); + if (!SVIP_PORT_INRANGE(nPort)) + { + printk(KERN_ERR "SVIP NAT: Error, UDP port(%d) is out of range(%d..%d)\n", + nPort, SVIP_UDP_FROM, SVIP_UDP_TO); + ret = -1; + goto error; + } + nNatIdx = SVIP_PORT_INDEX(nPort); + down(sem_nat_tbl_access); + /* remove rule from the NAT table */ + memset(&pNatTable[nNatIdx], 0, sizeof(SVIP_NAT_table_entry_t)); + up(sem_nat_tbl_access); + break; + + case FIO_SVIP_NAT_RULE_LIST: + { + int len; + char buf[256]; + + down(sem_nat_tbl_access); + while (nProcReadIdx != -1) + { + len = SVIP_NAT_ProcReadNAT(buf, 256); + if (len > 0) + printk("%s", buf); + } + nProcReadIdx = 0; + up(sem_nat_tbl_access); + break; + } + + default: + printk(KERN_ERR "SVIP NAT: unsupported ioctl (%x) command for device %s\n", + ioctl_num, PATH_SVIP_NAT_DEVICE_NAME); + ret = -1; + goto error; + } + + if (nSize > sizeof(int)) + { + if (bRead) + { + if (copy_to_user ((void *)ioctl_param, (void *)pData, nSize) != 0) + { + printk(KERN_ERR "SVIP NAT: ioctl %x: copy_to_user() failed!\n", ioctl_num); + ret = -1; + goto error; + } + } + } + +error: + if (pData) + kfree(pData); + + return ret; +} + +#if 0 +void dump_msg(unsigned char *pData, unsigned int nLen) +{ + int i; + + for (i=0; i<nLen; i++) + { + if (!i || !(i%16)) + printk("\n "); + else if (i && !(i%4)) + printk(" "); + printk("%02x", pData[i]); + } + if (--i%16) + printk("\n"); +} +#endif + +/******************************************************************************/ +/** + Used to recalculate IP/UDP checksum using the original IP/UDP checksum + coming with the packet. The original source and destination IP addresses + are accounted for, and, the checksum is updated using the new source and + destination IP addresses. + + \arguments + skb - pointer to the receiving socket buffer + csum_old - original checksum + saddr_old - pointer to original source IP address + saddr_new - pointer to new source IP address + daddr_old - pointer to original destination IP address + daddr_new - pointer to new destination IP address + + \return + recalculated IP/UDP checksum + */ +/******************************************************************************/ +static inline u16 ip_udp_quick_csum(u16 csum_old, u16 *saddr_old, u16 *saddr_new, + u16 *daddr_old, u16 *daddr_new) +{ + u32 sum; + + sum = csum_old; + + /* convert back from one's complement */ + sum = ~sum & 0xffff; + + if (sum < saddr_old[0]) sum += 0xffff; + sum -= saddr_old[0]; + if (sum < saddr_old[1]) sum += 0xffff; + sum -= saddr_old[1]; + if (sum < daddr_old[0]) sum += 0xffff; + sum -= daddr_old[0]; + if (sum < daddr_old[1]) sum += 0xffff; + sum -= daddr_old[1]; + + sum += saddr_new[0]; + sum += saddr_new[1]; + sum += daddr_new[0]; + sum += daddr_new[1]; + + /* take only 16 bits out of the 32 bit sum and add up the carries */ + while (sum >> 16) + sum = (sum & 0xffff)+((sum >> 16) & 0xffff); + + /* one's complement the result */ + sum = ~sum; + + return (u16)(sum & 0xffff); +} + + +/******************************************************************************/ +/** + Returns a pointer to an ipv4 address assigned to device dev. The ipv4 + instance checked is pointed to by ifa_start. The function is suited for + itterative calls. + + \arguments + dev - pointer to network interface + ifa_start - pointer to ipv4 instance to return ipv4 address assigned + to, NULL for the first one + ppifa_addr - output parameter + + \return + pointer to the next ipv4 instance, which can be null if ifa_start was + the last instance present + */ +/******************************************************************************/ +static struct in_ifaddr *get_ifaddr(struct net_device *dev, + struct in_ifaddr *ifa_start, unsigned int **ppifa_addr) +{ + struct in_device *in_dev; + struct in_ifaddr *ifa = NULL; + + if ((in_dev=in_dev_get(dev)) != NULL) + { + if (ifa_start == NULL) + ifa = in_dev->ifa_list; + else + ifa = ifa_start; + if (ifa) + { + *ppifa_addr = &ifa->ifa_address; + ifa = ifa->ifa_next; + } + in_dev_put(in_dev); + return ifa; + } + *ppifa_addr = NULL; + return NULL; +} + +/******************************************************************************/ +/** + This function performs IP NAT for received packets satisfying the + following requirements: + + - packet is destined to local IP host + - transport protocol type is UDP + - destination UDP port is within range + + \arguments + skb - pointer to the receiving socket buffer + + \return + returns 1 on performed SVIP NAT, else returns 0 + + \remarks + When function returns 0, it indicates the caller to pass the + packet up the IP stack to make further decision about it + */ +/******************************************************************************/ +int do_SVIP_NAT (struct sk_buff *skb) +{ + struct net_device *real_dev; + struct iphdr *iph; + struct udphdr *udph; + SVIP_NAT_IO_Rule_t *pNatRule; + int nNatIdx, in_eth0, nDir; +#ifndef VLAN_8021Q_UNUSED + int vlan; + unsigned short vid; +#endif /* ! VLAN_8021Q_UNUSED */ + SVIP_UDP_PORT_t nPort; + u32 orgSrcIp, orgDstIp, *pSrcIp, *pDstIp; + struct ethhdr *ethh; + + /* do not consider if SVIP NAT device not open. */ + if (!nDeviceOpen) + { + return 0; + } + + /* consider only UDP packets. */ + iph = SVIP_NAT_IP_HDR(skb); + if (iph->protocol != IPPROTO_UDP) + { + return 0; + } + + udph = (struct udphdr *)((u_int32_t *)iph + iph->ihl); + /* consider only packets which UDP port numbers reside within + the predefined SVIP NAT UDP port range. */ + if ((!SVIP_PORT_INRANGE(ntohs(udph->dest))) && + (!SVIP_PORT_INRANGE(ntohs(udph->source)))) + { + return 0; + } + +#ifndef VLAN_8021Q_UNUSED + /* check if packet delivered over VLAN. VLAN packets will be routed over + the VLAN interfaces of the respective real Ethernet interface, if one + exists(VIDs must match). Else, the packet will be send out as IEEE 802.3 + Ethernet frame */ + if (skb->dev->priv_flags & IFF_802_1Q_VLAN) + { + vlan = 1; + vid = VLAN_DEV_VLAN_ID(skb->dev); + real_dev = VLAN_DEV_REAL_DEV(skb->dev); + } + else + { + vlan = 0; + vid = 0; + real_dev = skb->dev; + } +#endif /* ! VLAN_8021Q_UNUSED */ + +#ifdef CONFIG_SVIP_FW_PKT_SNIFFER + /** Debugging feature which can be enabled by writing, + 'echo 1 > /proc/net/svip_nat/snifferOnOff'. + It copies all packets received on veth0 and, sends them out over eth0. + When a destination MAC address is specified through + /proc/net/svip_nat/snifferMAC, this MAC addess will substitute the + original MAC address of the packet. + It is recommended to specify a MAC address of some host where Wireshark + runs and sniffs for this traffic, else you may flood your LAN with + undeliverable traffic. + +NOTE: In case of VLAN traffic the VLAN header information is lost. */ + if (nSVIP_NAT_Sniffer) + { + if (real_dev == net_devs[SVIP_NET_DEV_VETH0_IDX]) + { + struct sk_buff *copied_skb; + + /* gain the Ethernet header from the skb */ + skb_push(skb, ETH_HLEN); + + copied_skb = skb_copy (skb, GFP_ATOMIC); + + if (nSVIP_NAT_SnifferMacSet == 1) + { + ethh = (struct ethhdr *)SVIP_NAT_SKB_MAC_HEADER(copied_skb); + memcpy((char *)ethh->h_dest, (char *)pSVIP_NAT_SnifferMAC, ETH_ALEN); + } + copied_skb->dev = net_devs[SVIP_NET_DEV_ETH0_IDX]; + dev_queue_xmit(copied_skb); + + /* skip the ETH header again */ + skb_pull(skb, ETH_HLEN); + } + } +#endif + + + /* check if packet arrived on eth0 */ + if (real_dev == net_devs[SVIP_NET_DEV_ETH0_IDX]) + { + /* check if destination IP address equals the primary assigned IP address + of interface eth0. This is the case of packets originating from a + remote peer that are to be delivered to a channel residing on THIS + voice linecard system. This is typical SVIP NAT case, therefore this + rule is placed on top. */ + if (iph->daddr == *paddr_eth0) + { + nPort = ntohs(udph->dest); + nDir = SVIP_NAT_STATS_REM2LOC; + } + /* check if destination IP address equals the secondary assigned IP address + of interface eth0. This is not a typical SVIP NAT case. It is basically + there, as someone might like for debugging purpose to use the LCC to route + Slave SVIP packets which are part of voice/fax streaming. */ + else if (iph->daddr == *paddr_eth0_0) + { + nPort = ntohs(udph->source); + nDir = SVIP_NAT_STATS_LOC2REM; + } +#ifndef VLAN_8021Q_UNUSED + /* when the packet did not hit the top two rules, here we check if the packet + has addressed any of the IP addresses assigned to the VLAN interface attached + to eth0. This is not recommended approach because of the CPU cost incurred. */ + else if (vlan) + { + unsigned int *pifa_addr; + struct in_ifaddr *ifa_start = NULL; + int i = 0; + + do + { + ifa_start = get_ifaddr(skb->dev, ifa_start, &pifa_addr); + if (!pifa_addr) + { + /* VLAN packet received on vlan interface attached to eth0, + however no IP address assigned to the interface. + The packet is ignored. */ + return 0; + } + if (iph->daddr == *pifa_addr) + { + /* packet destined to... */ + break; + } + if (!ifa_start) + { + return 0; + } + i++; + } while (ifa_start); + if (!i) + { + /* ...primary assigned IP address to the VLAN interface. */ + nPort = ntohs(udph->dest); + nDir = SVIP_NAT_STATS_REM2LOC; + } + else + { + /* ...secondary assigned IP address to the VLAN interface. */ + nPort = ntohs(udph->source); + nDir = SVIP_NAT_STATS_LOC2REM; + } + } +#endif /* ! VLAN_8021Q_UNUSED */ + else + { + return 0; + } + in_eth0 = 1; + } + /* check if packet arrived on veth0 */ + else if (real_dev == net_devs[SVIP_NET_DEV_VETH0_IDX]) + { + nPort = ntohs(udph->source); + nDir = SVIP_NAT_STATS_LOC2REM; + in_eth0 = 0; + } + else + { + /* packet arrived neither on eth0, nor veth0 */ + return 0; + } + + /* calculate the respective index of the NAT table */ + nNatIdx = SVIP_PORT_INDEX(nPort); + /* process the packet if a respective NAT rule exists */ + pNatRule = &pNatTable[nNatIdx].natRule; + + ethh = (struct ethhdr *)SVIP_NAT_SKB_MAC_HEADER(skb); + + /* copy packet's original source and destination IP addresses to use + later on to perform efficient checksum recalculation */ + orgSrcIp = iph->saddr; + orgDstIp = iph->daddr; + + if (in_eth0) + { + u8 *pDstMac; + + /* Process packet arrived on eth0 */ + + if (nDir == SVIP_NAT_STATS_REM2LOC && iph->saddr == pNatRule->remIP) + { + pDstIp = &pNatRule->locIP; + pDstMac = pNatRule->locMAC; + } + else if (nDir == SVIP_NAT_STATS_LOC2REM && iph->saddr == pNatRule->locIP) + { + pDstIp = &pNatRule->remIP; + pDstMac = pNatRule->remMAC; + } + else + { + /* Rule check failed. The packet is passed up the layers, + it will be dropped by UDP */ + return 0; + } + + if ((*pDstIp & *pmask_veth0) == (*paddr_veth0 & *pmask_veth0)) + { +#ifndef VLAN_8021Q_UNUSED + if (vlan) + { + struct net_device *vlan_dev; + + spin_lock_bh(&vlan_group_lock); + vlan_dev = __vlan_find_dev_deep(net_devs[SVIP_NET_DEV_VETH0_IDX], vid); + spin_unlock_bh(&vlan_group_lock); + if (vlan_dev) + { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + struct vlan_ethhdr *vethh; + + skb_push(skb, VLAN_ETH_HLEN); + /* reconstruct the VLAN header. +NOTE: priority information is lost */ + vethh = (struct vlan_ethhdr *)skb->data; + vethh->h_vlan_proto = htons(ETH_P_8021Q); + vethh->h_vlan_TCI = htons(vid); + vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP); + ethh = (struct ethhdr *)vethh; +#else + skb_push(skb, ETH_HLEN); +#endif + skb->dev = vlan_dev; + } + else + { + skb->dev = net_devs[SVIP_NET_DEV_VETH0_IDX]; + skb_push(skb, ETH_HLEN); + } + } + else +#endif /* ! VLAN_8021Q_UNUSED */ + { + skb->dev = net_devs[SVIP_NET_DEV_VETH0_IDX]; + skb_push(skb, ETH_HLEN); + } + pSrcIp = paddr_veth0; + } + else + { +#ifndef VLAN_8021Q_UNUSED +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + if (vlan) + { + struct vlan_ethhdr *vethh; + + /* reconstruct the VLAN header. +NOTE: priority information is lost */ + skb_push(skb, VLAN_ETH_HLEN); + vethh = (struct vlan_ethhdr *)skb->data; + vethh->h_vlan_proto = htons(ETH_P_8021Q); + vethh->h_vlan_TCI = htons(vid); + vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP); + ethh = (struct ethhdr *)vethh; + } + else +#endif +#endif /* ! VLAN_8021Q_UNUSED */ + { + skb_push(skb, ETH_HLEN); + } + /* source IP address equals the destination IP address + of the incoming packet */ + pSrcIp = &iph->daddr; + } + iph->saddr = *pSrcIp; + memcpy((char *)ethh->h_source, (char *)skb->dev->dev_addr, ETH_ALEN); + iph->daddr = *pDstIp; + memcpy((char *)ethh->h_dest, (char *)pDstMac, ETH_ALEN); + } + else + { + /* Process packet arrived on veth0 */ + + if (iph->saddr != pNatRule->locIP) + { + /* Rule check failed. The packet is passed up the layers, + it will be dropped by UDP */ + return 0; + } + + if (!((pNatRule->remIP & *pmask_veth0) == (*paddr_veth0 & *pmask_veth0))) + { +#ifndef VLAN_8021Q_UNUSED + if (vlan) + { + struct net_device *vlan_dev; + + spin_lock_bh(&vlan_group_lock); + vlan_dev = __vlan_find_dev_deep(net_devs[SVIP_NET_DEV_ETH0_IDX], vid); + spin_unlock_bh(&vlan_group_lock); + if (vlan_dev) + { + unsigned int *pifa_addr; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + struct vlan_ethhdr *vethh; + + skb_push(skb, VLAN_ETH_HLEN); + /* construct the VLAN header, note priority information is lost */ + vethh = (struct vlan_ethhdr *)skb->data; + vethh->h_vlan_proto = htons(ETH_P_8021Q); + vethh->h_vlan_TCI = htons(vid); + vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP); + ethh = (struct ethhdr *)vethh; +#else + skb_push(skb, ETH_HLEN); +#endif + skb->dev = vlan_dev; + + get_ifaddr(skb->dev, NULL, &pifa_addr); + if (pifa_addr) + { + pSrcIp = pifa_addr; + } + else + { + pSrcIp = paddr_eth0; + } + } + else + { + skb->dev = net_devs[SVIP_NET_DEV_ETH0_IDX]; + pSrcIp = paddr_eth0; + skb_push(skb, ETH_HLEN); + } + } + else +#endif /* ! VLAN_8021Q_UNUSED */ + { + skb->dev = net_devs[SVIP_NET_DEV_ETH0_IDX]; + pSrcIp = paddr_eth0; + skb_push(skb, ETH_HLEN); + } + } + else + { + pSrcIp = paddr_veth0; +#ifndef VLAN_8021Q_UNUSED +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + if (vlan) + { + struct vlan_ethhdr *vethh; + + skb_push(skb, VLAN_ETH_HLEN); + /* reconstruct the VLAN header. +NOTE: priority information is lost. */ + vethh = (struct vlan_ethhdr *)skb->data; + vethh->h_vlan_proto = htons(ETH_P_8021Q); + vethh->h_vlan_TCI = htons(vid); + vethh->h_vlan_encapsulated_proto = htons(ETH_P_IP); + ethh = (struct ethhdr *)vethh; + } + else +#endif +#endif /* ! VLAN_8021Q_UNUSED */ + { + skb_push(skb, ETH_HLEN); + } + } + iph->saddr = *pSrcIp; + memcpy((char *)ethh->h_source, (char *)skb->dev->dev_addr, ETH_ALEN); + iph->daddr = pNatRule->remIP; + memcpy((char *)ethh->h_dest, (char *)pNatRule->remMAC, ETH_ALEN); + } + pNatTable[nNatIdx].natStats[nDir].inPackets++; + + iph->check = ip_udp_quick_csum(iph->check, (u16 *)&orgSrcIp, (u16 *)&iph->saddr, + (u16 *)&orgDstIp, (u16 *)&iph->daddr); + if (udph->check != 0) + { + udph->check = ip_udp_quick_csum(udph->check, (u16 *)&orgSrcIp, (u16 *)&iph->saddr, + (u16 *)&orgDstIp, (u16 *)&iph->daddr); + } + + /* write the packet out, directly to the network device */ + if (dev_queue_xmit(skb) < 0) + pNatTable[nNatIdx].natStats[nDir].outErrors++; + else + pNatTable[nNatIdx].natStats[nDir].outPackets++; + + return 1; +} + +/******************************************************************************/ +/** + Function executed upon unloading of the SVIP NAT module. It unregisters the + SVIP NAT configuration device and frees the memory used for the NAT table. + + \remarks: + Currently the SVIP NAT module is statically linked into the Linux kernel + therefore this routine cannot be executed. + *******************************************************************************/ +static int __init init(void) +{ + int ret = 0; + struct net_device *dev; + + if (misc_register(&SVIP_NAT_miscdev) != 0) + { + printk(KERN_ERR "%s: cannot register SVIP NAT device node.\n", + SVIP_NAT_miscdev.name); + return -EIO; + } + + /* allocation of memory for NAT table */ + pNatTable = (SVIP_NAT_table_entry_t *)kmalloc( + sizeof(SVIP_NAT_table_entry_t) * SVIP_SYS_CODEC_NUM, GFP_ATOMIC); + if (pNatTable == NULL) + { + printk (KERN_ERR "SVIP NAT: Error(%d), allocating memory for NAT table\n", ret); + return -1; + } + + /* clear the NAT table */ + memset((void *)pNatTable, 0, sizeof(SVIP_NAT_table_entry_t) * SVIP_SYS_CODEC_NUM); + + if ((sem_nat_tbl_access = kmalloc(sizeof(struct semaphore), GFP_KERNEL))) + { + sema_init(sem_nat_tbl_access, 1); + } + + SVIP_NAT_ProcInstall(); + + /* find pointers to 'struct net_device' of eth0 and veth0, respectevely */ + read_lock(&dev_base_lock); + SVIP_NAT_FOR_EACH_NETDEV(dev) + { + if (!strcmp(dev->name, SVIP_NET_DEV_ETH0_NAME)) + { + net_devs[SVIP_NET_DEV_ETH0_IDX] = dev; + } + if (!strcmp(dev->name, SVIP_NET_DEV_VETH1_NAME)) + { + net_devs[SVIP_NET_DEV_VETH0_IDX] = dev; + } + else if (!strcmp(dev->name, SVIP_NET_DEV_ETH1_NAME)) + { + net_devs[SVIP_NET_DEV_VETH0_IDX] = dev; + } + } + read_unlock(&dev_base_lock); + + if (net_devs[SVIP_NET_DEV_ETH0_IDX] == NULL || + net_devs[SVIP_NET_DEV_VETH0_IDX] == NULL) + { + printk (KERN_ERR "SVIP NAT: Error, unable to locate eth0 and veth0 interfaces\n"); + return -1; + } + + printk ("%s, (c) 2009, Lantiq Deutschland GmbH\n", &SVIP_NAT_INFO_STR[4]); + + return ret; +} + +/******************************************************************************/ +/** + Function executed upon unloading of the SVIP NAT module. It unregisters the + SVIP NAT configuration device and frees the memory used for the NAT table. + + \remarks: + Currently the SVIP NAT module is statically linked into the Linux kernel + therefore this routine cannot be executed. + *******************************************************************************/ +static void __exit fini(void) +{ + MOD_DEC_USE_COUNT; + + /* unregister SVIP NAT configuration device */ + misc_deregister(&SVIP_NAT_miscdev); + + /* release memory of SVIP NAT table */ + if (pNatTable != NULL) + { + kfree (pNatTable); + } +} + +module_init(init); +module_exit(fini); |