diff options
Diffstat (limited to 'target/linux/lantiq/dts')
| -rw-r--r-- | target/linux/lantiq/dts/ARV7519PW.dts | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/target/linux/lantiq/dts/ARV7519PW.dts b/target/linux/lantiq/dts/ARV7519PW.dts new file mode 100644 index 0000000000..1478192663 --- /dev/null +++ b/target/linux/lantiq/dts/ARV7519PW.dts @@ -0,0 +1,213 @@ +/dts-v1/; + +/include/ "danube.dtsi" + +/ { + model = "ARV7519PW - Astoria Networks"; + + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xf80000>; + }; + + partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + + mac_addr { + compatible = "lantiq,eth-mac"; + reg = <0 0xfe0016 0x6>; + mac-increment = <2>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + switch_rst { + lantiq,pins = "io19"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + }; + + /* warning: passive port + only works with active devices */ + ifxhcd@E101000 { + status = "okay"; + }; + + pci@E105400 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 0>; + req-mask = <0xf>; + }; + }; + + ralink_eep { + compatible = "ralink,eeprom"; + ralink,eeprom = "RT2860.eeprom"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 1>; + linux,code = <0xf7>; + }; + reset { + label = "reset"; + gpios = <&gpio 28 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "power"; + gpios = <&gpio 2 1>; + default-state = "off"; + }; + power2 { + label = "power2"; + gpios = <&gpio 14 1>; + }; + online { + label = "online"; + gpios = <&gpio 3 1>; + }; + online2 { + label = "online2"; + gpios = <&gpio 30 1>; + }; + wifi { + label = "wifi"; + gpios = <&gpio 12 1>; + }; + wifi2 { + label = "wifi2"; + gpios = <&gpio 10 1>; + }; + wifi3 { + label = "wifi3"; + gpios = <&gpio 6 1>; + }; + voice { + label = "voice"; + gpios = <&gpio 31 1>; + }; + wps { + label = "wps"; + gpios = <&gpio 15 1>; + }; + wps2 { + label = "wps2"; + gpios = <&gpio 7 1>; + }; + wps3 { + label = "wps3"; + gpios = <&gpio 23 1>; + }; + dsl { + label = "dsl"; + gpios = <&gpio 4 1>; + }; + lan { + label = "lan"; + gpios = <&gpio 1 1>; + }; + tv { + label = "tv"; + gpios = <&gpio 20 1>; + }; + upgrade { + label = "upgrade"; + gpios = <&gpio 29 1>; + }; + }; + + /* is there another way to "reserve" the GPIO? */ + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 19 0>; + }; + }; +}; |