diff options
Diffstat (limited to 'target/linux/lantiq/dts/VGV7510KW22.dtsi')
| -rw-r--r-- | target/linux/lantiq/dts/VGV7510KW22.dtsi | 256 |
1 files changed, 256 insertions, 0 deletions
diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi new file mode 100644 index 0000000000..077ed2372a --- /dev/null +++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi @@ -0,0 +1,256 @@ +/include/ "vr9.dtsi" + +/ { + model = "VGV7510KW22 - o2 Box 6431"; + + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ip101a-rst { + lantiq,pins = "io46"; + lantiq,output = <0>; + lantiq,pull = <1>; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", + "gphy1 led0", "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pci-rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + spi { + lantiq,groups = "spi"; + lantiq,function = "spi"; + }; + }; + }; + + eth@E108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xE108000 0x3000 /* switch */ + 0xE10B100 0x70 /* mdio */ + 0xE10B1D8 0x30 /* mii */ + 0xE10B308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + lantiq,switch; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + stp: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xff>; + lantiq,groups = <0x1>; + lantiq,dsl = <0x0>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */ + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 47 0>; + }; + + pci@E105400 { + status = "okay"; + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30 + >; + gpio-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + + pcie@d900000 { + status = "disabled"; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + ralink_eep { + compatible = "ralink,eeprom"; + ralink,eeprom = "RT3062.eeprom"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 6 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio 9 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + dsl { + label = "dsl"; + gpios = <&gpio 2 1>; + }; + + internet_red { + label = "internet_red"; + gpios = <&gpio 10 1>; + }; + + info_red { + label = "info_red"; + gpios = <&gpio 12 1>; + }; + + power { + label = "power"; /* green */ + gpios = <&gpio 14 1>; + }; + + info_green { + label = "info_green"; + gpios = <&gpio 15 1>; + }; + + internet_green { + label = "internet_green"; + gpios = <&gpio 19 1>; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 20 1>; + }; + + power2 { + label = "power2"; /* red */ + gpios = <&gpio 28 1>; + }; + + phone_red { + label = "phone_red"; + gpios = <&gpio 29 1>; + }; + }; +}; |