diff options
Diffstat (limited to 'target/linux/lantiq/base-files')
5 files changed, 0 insertions, 472 deletions
diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds deleted file mode 100755 index e89de97fbe..0000000000 --- a/target/linux/lantiq/base-files/etc/board.d/01_leds +++ /dev/null @@ -1,85 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011-2015 OpenWrt.org -# based on ar71xx -# - -. /lib/functions/leds.sh -. /lib/functions/uci-defaults.sh - -board_config_update - -led_wifi="$(get_dt_led wifi)" -[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt" - -led_usb="$(get_dt_led usb)" -[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1" - -led_usb2="$(get_dt_led usb2)" -[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1" - -led_dsl="$(get_dt_led dsl)" -[ -n "$led_dsl" ] && { - led_internet="$(get_dt_led internet)" - if [ -n "$led_internet" ]; then - ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0" - ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan" - else - ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0" - fi -} - -board=$(board_name) - -case "$board" in -allnet,all0333cj) - ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1" - ;; -arcadyan,arv4525pw) - ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0" - ;; -arcadyan,arv7506pw11) - ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio" - ;; -arcadyan,arv7519rw22) - ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1" - ;; -arcadyan,arv752dpw22) - ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio" - ;; -bt,homehub-v5a) - ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0" - ;; -netgear,dm200) - ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0" - ;; -avm,fritz3370-rev2-hynix|\ -avm,fritz3370-rev2-micron) - ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17" - ;; -zyxel,p-2812hnu-f1|\ -zyxel,p-2812hnu-f3) - ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio" - ;; -arcadyan,vgv7510kw22-nor|\ -arcadyan,vgv7510kw22-brn) - ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio" - ;; -arcadyan,vgv7519-nor|\ -arcadyan,vgv7519-brn) - ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio" - ;; -buffalo,wbmr-300hpd) - ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08" - ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04" - ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10" - ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20" - ucidef_set_led_default "router" "router" "wbmr300:green:router" "1" - ;; -*) - ;; -esac - -board_config_flush - -exit 0 diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network deleted file mode 100755 index d79a30d22d..0000000000 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ /dev/null @@ -1,268 +0,0 @@ -#!/bin/sh -# -# Copyright (C) 2011-2015 OpenWrt.org -# - -. /lib/functions/uci-defaults.sh -. /lib/functions/system.sh -. /lib/functions/lantiq.sh - -board_config_update - -vpi=1 -vci=32 -annex="a" -tone="av" -xfer_mode="" -encaps="llc" -payload="bridged" -lan_mac="" -wan_mac="" -interface_wan="dsl0" - -board=$(board_name) - -case "$board" in -audiocodes,mp-252) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" - ;; - -allnet,all0333cj) - annex="b" - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0' - ;; - -arcadyan,arv4510pw) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0" - ;; - -arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw) - ucidef_add_switch "switch0" \ - "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - -arcadyan,arv4520pw) - annex="b" - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" - ;; - -arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw) - annex="b" - ucidef_set_interface_lan 'eth0' - ;; - -arcadyan,arv7506pw11) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" - ;; - -arcadyan,arv7519pw) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" - ;; - -arcadyan,arv7519rw22) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1) - ucidef_add_switch "switch0" \ - "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0" - ;; - -arcadyan,arv752dpw22|arcadyan,arv8539pw22) - annex="b" - ucidef_add_switch "switch0" \ - "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - -alphanetworks,asl56026) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(mtd_get_mac_ascii uboot_env wanmac) - ucidef_add_switch "switch0"\ - "2:lan" "3:lan" "6t@eth0" - ;; - -bt,homehub-v2b) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0" - ;; - -bt,homehub-v3a) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0' - ;; - -bt,homehub-v5a) - lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" - ;; - -netgear,dgn1000b) - annex="b" - ucidef_set_interface_lan 'eth0' - ;; - -netgear,dgn3500|netgear,dgn3500b) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0" - ;; - -netgear,dm200) - lan_mac=$(mtd_get_mac_binary ART 0x0) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_set_interface_lan 'eth0' - ;; - -lantiq,easy80920-nand|lantiq,easy80920-nor) - lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" - ;; - -avm,fritz3370-rev2-hynix|\ -avm,fritz3370-rev2-micron) - annex="b" - lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) - wan_mac=$(macaddr_add "$lan_mac" 3) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" - ;; - -avm,fritz7312|\ -avm,fritz7320) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) - ucidef_set_interface_lan 'eth0' - ;; - -avm,fritz7360sl) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" - ;; - -avm,fritz7362sl) - annex="b" - lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) - wan_mac=$(fritz_tffs -n macdsl -i $(find_mtd_part "tffs (1)")) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" - ;; - -avm,fritz7412) - tffsdev=$(find_mtd_chardev "nand-tffs") - annex="b" - lan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n maca -o) - wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl -o) - ucidef_set_interface_lan 'eth0' - ;; - -siemens,gigaset-sx76x) - annex="b" - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0" - ;; - -zte,h201l) - annex="b" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0" - ;; - -zyxel,p-2601hn) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0" - ;; - -zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0" - ;; - -tplink,tdw8970|tplink,tdw8980) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1) - ucidef_add_switch "switch0" \ - "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0" - ;; - -arcadyan,vg3503j) - lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr) - wan_mac=$(macaddr_add "$lan_mac" 1) - ucidef_add_switch "switch0" \ - "2:lan:2" "4:lan:1" "6t@eth0" - ;; - -tplink,vr200|tplink,vr200v) - wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1) - ucidef_add_switch "switch0" \ - "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0" - ;; - -arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn) - annex="b" - wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0" - ;; - -arcadyan,vgv7519-nor|arcadyan,vgv7519-brn) - wan_mac=$(mtd_get_mac_binary board_config 0x16) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" - ;; - -buffalo,wbmr-hp-g300h) - ucidef_add_switch "switch0" \ - "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan" - ;; - -buffalo,wbmr-300hpd) - lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr) - wan_mac="$lan_mac" - ucidef_add_switch "switch0" \ - "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0" - ;; - -*) - ucidef_set_interface_lan 'eth0' - ;; - -esac - -ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ - ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl" - -if lantiq_is_vdsl_system; then - ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode" -else - ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" -fi - -ucidef_set_interface_wan "$interface_wan" "pppoe" - -[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac" -[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac" - -board_config_flush - -exit 0 - diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata deleted file mode 100644 index 0b48b77d41..0000000000 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh -# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh - -case "$FIRMWARE" in -"ath10k/cal-pci-0000:02:00.0.bin") - board=$(board_name) - case $board in - bt,homehub-v5a) - caldata_extract_ubi "caldata" 0x5000 0x844 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +3) - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom deleted file mode 100644 index 5a6e8d360b..0000000000 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/sh - -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/caldata.sh - -caldata_extract_swap() { - local part=$1 - local offset=$2 - local count=$3 - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || caldata_die "no mtd device found for partition $part" - - offset=$(($offset / 2)) - count=$(($count / 2)) - - dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab 2>/dev/null || \ - caldata_die "failed to extract calibration data from $mtd" -} - -case "$FIRMWARE" in - "ath9k-eeprom-pci-0000:00:0e.0.bin" | \ - "ath9k-eeprom-pci-0000:01:00.0.bin" | \ - "ath9k-eeprom-pci-0000:02:00.0.bin") - board=$(board_name) - - case "$board" in - arcadyan,arv7518pw) - caldata_extract_swap "boardconfig" 0x400 0x1000 - ;; - arcadyan,arv8539pw22) - caldata_extract_swap "art" 0x400 0x1000 - ;; - bt,homehub-v2b) - caldata_extract_swap "art" 0x0 0x1000 - ath9k_patch_mac_crc "00:00:00:00:00:00" 0x20c - ;; - bt,homehub-v3a) - caldata_extract_swap "art-copy" 0x0 0x1000 - ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c - ;; - bt,homehub-v5a) - caldata_extract_ubi "caldata" 0x1000 0x1000 - ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c - ;; - netgear,dgn3500|netgear,dgn3500b) - caldata_extract "calibration" 0xf000 0x1000 - ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c - ;; - avm,fritz3370-rev2-hynix|\ - avm,fritz3370-rev2-micron|\ - avm,fritz7362sl) - caldata_extract_reverse "urlader" 0x1541 0x440 - ;; - avm,fritz7312|avm,fritz7320|avm,fritz7360sl) - caldata_extract "urlader" 0x985 0x1000 - ;; - avm,fritz7412) - /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") - ;; - tplink,tdw8970|tplink,tdw8980) - caldata_extract "boardconfig" 0x21000 0x1000 - ;; - *) - caldata_die "board $board is not supported yet" - ;; - esac - ;; -esac diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/base-files/lib/upgrade/platform.sh deleted file mode 100755 index c47ff78fb2..0000000000 --- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,27 +0,0 @@ -PART_NAME=firmware -REQUIRE_IMAGE_METADATA=1 - -platform_check_image() { - return 0 -} - -platform_do_upgrade() { - local board=$(board_name) - - case "$board" in - avm,fritz3370-rev2-hynix|\ - avm,fritz3370-rev2-micron|\ - avm,fritz7362sl|\ - avm,fritz7412|\ - bt,homehub-v2b|\ - bt,homehub-v3a|\ - bt,homehub-v5a|\ - zyxel,p-2812hnu-f1|\ - zyxel,p-2812hnu-f3) - nand_do_upgrade $1 - ;; - *) - default_do_upgrade "$1" - ;; - esac -} |