diff options
Diffstat (limited to 'target/linux/lantiq/base-files/etc/hotplug.d/firmware')
-rw-r--r-- | target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom new file mode 100644 index 0000000000..8185bf1949 --- /dev/null +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -0,0 +1,140 @@ +#!/bin/sh +# Based on ar71xx 10-ath9k-eeprom + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh +. /lib/functions/lantiq.sh +. /lib/upgrade/nand.sh + +# xor multiple hex values of the same length +xor() { + local val + local ret="0x$1" + local retlen=${#1} + + shift + while [ -n "$1" ]; do + val="0x$1" + ret=$((ret ^ val)) + shift + done + + printf "%0${retlen}x" "$ret" +} + +ath9k_eeprom_die() { + echo "ath9k eeprom: $*" + exit 1 +} + +ath9k_eeprom_extract_raw() { + local source=$1 + local offset=$2 + local size=4096 + + dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$size 2>/dev/null || \ + ath9k_eeprom_die "failed to extract from $mtd" +} + +ath9k_eeprom_extract() { + local part=$1 + local offset=$2 + local mtd + + mtd=$(find_mtd_chardev $part) + [ -n "$mtd" ] || \ + ath9k_eeprom_die "no mtd device found for partition $part" + + ath9k_eeprom_extract_raw $mtd $offset +} + +ath9k_ubi_eeprom_extract() { + local part=$1 + local offset=$2 + local ubidev=$(nand_find_ubi $CI_UBIPART) + local ubi + + ubi=$(nand_find_volume $ubidev $part) + [ -n "$ubi" ] || \ + ath9k_eeprom_die "no UBI volume found for $part" + + ath9k_eeprom_extract_raw /dev/$ubi $offset +} + +ath9k_patch_firmware_mac() { + local mac=$1 + local mac_offset=$2 + local swap=$3 + local chksum_offset=$4 + local xor_mac + local xor_fw_mac + local xor_fw_chksum + + [ -z "$mac" -o -z "$mac_offset" ] && return + + [ $swap -gt 0 ] && mac="${mac:3:2}:${mac:0:2}:${mac:9:2}:${mac:6:2}:${mac:15:2}:${mac:12:2}" + + [ -n "$chksum_offset" ] && { + xor_mac=${mac//:/} + xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}" + + xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) + xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}" + + xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) + xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac) + + printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \ + dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 + } + + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6 +} + +case "$FIRMWARE" in + "ath9k-eeprom-pci-0000:00:0e.0.bin" | \ + "ath9k-eeprom-pci-0000:01:00.0.bin" | \ + "ath9k-eeprom-pci-0000:02:00.0.bin") + board=$(lantiq_board_name) + + case "$board" in + ARV7518PW) + ath9k_eeprom_extract "boardconfig" 1024 + ;; + ARV8539PW22) + ath9k_eeprom_extract "art" 1024 + ;; + BTHOMEHUBV2B) + ath9k_eeprom_extract "art" 0 + ath9k_patch_firmware_mac "00:00:00:00:00:00" 524 1 514 + ;; + BTHOMEHUBV3A) + ath9k_eeprom_extract "art-copy" 0 + ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 268 1 258 + ;; + BTHOMEHUBV5A) + ath9k_eeprom_extract "caldata" 4096 + ;; + DGN3500*) + ath9k_eeprom_extract "calibration" 61440 + ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 0 514 + ;; + FRITZ3370) + ath9k_eeprom_extract "urlader" 2437 + ath9k_patch_firmware_mac "00:00:00:00:00:00" 2 0 + ;; + FRITZ7320|FRITZ7360SL) + ath9k_eeprom_extract "urlader" 2437 + ath9k_patch_firmware_mac "00:00:00:00:00:00" 268 0 258 + ;; + TDW8970|TDW8980) + ath9k_eeprom_extract "boardconfig" 135168 + ;; + *) + ath9k_eeprom_die "board $board is not supported yet" + ;; + esac + ;; +esac |