aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch')
-rw-r--r--target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch76
1 files changed, 76 insertions, 0 deletions
diff --git a/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch
new file mode 100644
index 0000000000..c6452c55a3
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch
@@ -0,0 +1,76 @@
+--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
++++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+@@ -19,6 +19,13 @@
+ reg = <0x00000000 0x10000000>;
+ };
+
++ aliases {
++ led-boot = &led_power;
++ led-failsafe = &led_power;
++ led-running = &led_power;
++ led-upgrade = &led_power;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+@@ -115,7 +122,7 @@
+ &pmx_led_blue_backup >;
+ pinctrl-names = "default";
+
+- power_led {
++ led_power: power_led {
+ label = "status:blue:power_led";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+@@ -129,11 +136,13 @@
+ disk1_led {
+ label = "status:blue:disk1_led";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "ata1";
+ };
+
+ disk2_led {
+ label = "status:blue:disk2_led";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "ata2";
+ };
+
+ backup_led {
+@@ -150,7 +159,13 @@
+
+ power-button {
+ label = "Power Button";
+- linux,code = <KEY_POWER>;
++ /* Power button and INT pin from PHY are both connected
++ * to this GPIO. Every network restart causes PHY restart
++ * and button is pressed. It's difficult to use it as
++ * KEY_POWER without changes in kernel (or netifd) so
++ * the button is configured as regular one.
++ */
++ linux,code = <BTN_1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+@@ -208,18 +223,13 @@
+ };
+
+ partition@200000 {
+- label = "uImage";
++ label = "kernel";
+ reg = <0x0200000 0x600000>;
+ };
+
+ partition@800000 {
+- label = "minirootfs";
+- reg = <0x0800000 0x1000000>;
+- };
+-
+- partition@1800000 {
+- label = "jffs2";
+- reg = <0x1800000 0x6800000>;
++ label = "ubi";
++ reg = <0x0800000 0x7800000>;
+ };
+ };
+