1 files changed, 0 insertions, 218 deletions
diff --git a/target/linux/kirkwood/patches-3.3/200-iconnect.patch b/target/linux/kirkwood/patches-3.3/200-iconnect.patch
deleted file mode 100644
index 5a46ee780f..0000000000
--- a/target/linux/kirkwood/patches-3.3/200-iconnect.patch
+++ /dev/null
@@ -1,218 +0,0 @@
---- a/arch/arm/mach-kirkwood/Makefile
-+++ b/arch/arm/mach-kirkwood/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheeva
- obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
- obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
- obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
-+obj-$(CONFIG_MACH_ICONNECT)		+= iconnect-setup.o
- obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
- obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
---- a/arch/arm/mach-kirkwood/Kconfig
-+++ b/arch/arm/mach-kirkwood/Kconfig
-@@ -130,6 +130,12 @@ config MACH_T5325
- 	  Say 'Y' here if you want your kernel to support the
- 	  HP t5325 Thin Client.
- 
-+config MACH_ICONNECT
-+	bool "Iomega iConnect Wireless"
-+	help
-+	  Say 'Y' here if you want your kernel to support the
-+	  Iomega iConnect Wireless.
-+
- endmenu
- 
- endif
---- /dev/null
-+++ b/arch/arm/mach-kirkwood/iconnect-setup.c
-@@ -0,0 +1,190 @@
-+/*
-+ * arch/arm/mach-kirkwood/iconnect-setup.c
-+ *
-+ * Iomega iConnect Wireless
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/irq.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mv643xx_eth.h>
-+#include <linux/ethtool.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/leds.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <mach/kirkwood.h>
-+#include "common.h"
-+#include "mpp.h"
-+
-+static struct mtd_partition iconnect_nand_parts[] = {
-+	{
-+		.name = "u-boot",
-+		.offset = 0,
-+		.size = SZ_1M
-+	}, {
-+		.name = "uImage",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_1M + SZ_2M
-+	}, {
-+		.name = "rootfs",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = SZ_32M,
-+	}, {
-+		.name = "data",
-+		.offset = MTDPART_OFS_NXTBLK,
-+		.size = MTDPART_SIZ_FULL
-+	},
-+};
-+
-+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-+};
-+
-+static struct gpio_led iconnect_led_pins[] = {
-+	{
-+		.name			= "iconnect:blue:power",
-+		.default_trigger	= "default-on",
-+		.gpio			= 42,
-+	},
-+	{
-+		.name			= "iconnect:red:power",
-+		.gpio			= 43,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb1",
-+		.gpio			= 44,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb2",
-+		.gpio			= 45,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb3",
-+		.gpio			= 46,
-+	},
-+	{
-+		.name			= "iconnect:blue:usb4",
-+		.gpio			= 47,
-+	},
-+	{
-+		.name			= "iconnect:blue:otb",
-+		.gpio			= 48,
-+	},
-+};
-+
-+static struct gpio_led_platform_data iconnect_led_data = {
-+	.leds		= iconnect_led_pins,
-+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-+};
-+
-+static struct platform_device iconnect_leds = {
-+	.name	= "leds-gpio",
-+	.id	= -1,
-+	.dev	= {
-+		.platform_data	= &iconnect_led_data,
-+	}
-+};
-+
-+#define ICONNECT_GPIO_KEY_RESET		12
-+#define ICONNECT_GPIO_KEY_OTB		35
-+
-+#define ICONNECT_SW_RESET		0x00
-+#define ICONNECT_SW_OTB			0x01
-+
-+static struct gpio_keys_button iconnect_buttons[] = {
-+	{
-+		.type		= EV_SW,
-+		.code		= ICONNECT_SW_RESET,
-+		.gpio		= ICONNECT_GPIO_KEY_RESET,
-+		.desc		= "Reset Button",
-+		.active_low	= 1,
-+		.debounce_interval = 100,
-+	},
-+	{
-+		.type		= EV_SW,
-+		.code		= ICONNECT_SW_OTB,
-+		.gpio		= ICONNECT_GPIO_KEY_OTB,
-+		.desc		= "OTB Button",
-+		.active_low	= 1,
-+		.debounce_interval = 100,
-+	},
-+};
-+
-+static struct gpio_keys_platform_data iconnect_button_data = {
-+	.buttons	= iconnect_buttons,
-+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
-+};
-+
-+static struct platform_device iconnect_button_device = {
-+	.name	   	= "gpio-keys",
-+	.id		= -1,
-+	.num_resources	= 0,
-+	.dev = {
-+		.platform_data = &iconnect_button_data,
-+	},
-+};
-+
-+static unsigned int iconnect_mpp_config[] __initdata = {
-+	MPP12_GPIO, /*Input for reset button*/
-+	MPP35_GPIO, /*Input for OTB button*/
-+	MPP42_GPIO,
-+	MPP43_GPIO,
-+	MPP44_GPIO,
-+	MPP45_GPIO,
-+	MPP46_GPIO,
-+	MPP47_GPIO,
-+	MPP48_GPIO,
-+	0
-+};
-+
-+static void __init iconnect_init(void)
-+{
-+	u32 dev, rev;
-+
-+	/*
-+	 * Basic setup. Needs to be called early.
-+	 */
-+	kirkwood_init();
-+	kirkwood_mpp_conf(iconnect_mpp_config);
-+
-+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-+	kirkwood_ehci_init();
-+
-+	kirkwood_ge00_init(&iconnect_ge00_data);
-+	kirkwood_pcie_id(&dev, &rev);
-+
-+	kirkwood_uart0_init();
-+	kirkwood_i2c_init();
-+
-+	platform_device_register(&iconnect_leds);
-+	platform_device_register(&iconnect_button_device);
-+}
-+
-+static int __init iconnect_pci_init(void)
-+{
-+	if (machine_is_iconnect())
-+		kirkwood_pcie_init(KW_PCIE0);
-+
-+	return 0;
-+}
-+subsys_initcall(iconnect_pci_init);
-+
-+
-+MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
-+	.atag_offset	= 0x100,
-+	.init_machine	= iconnect_init,
-+	.map_io		= kirkwood_map_io,
-+	.init_early	= kirkwood_init_early,
-+	.init_irq	= kirkwood_init_irq,
-+	.timer		= &kirkwood_timer,
-+	.restart	= kirkwood_restart,
-+MACHINE_END