aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/files/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/kirkwood/files/arch/arm')
-rw-r--r--target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts218
-rw-r--r--target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts303
-rw-r--r--target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts271
3 files changed, 0 insertions, 792 deletions
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
deleted file mode 100644
index 8e6c198c5e..0000000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Endian 4i Edge 200 Board Description
- * Note: Endian UTM Mini is hardware clone of Endian Edge 200
- * Copyright 2021 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Endian 4i Edge 200";
- compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_orange;
- led-running = &led_status_green;
- led-upgrade = &led_status_orange;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- stdout-path = &uart0;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led49 &pmx_led35 &pmx_led34>;
- pinctrl-names = "default";
-
- led_status_green: status_green {
- label = "green:status";
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_orange: status_orange {
- label = "orange:status";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
-
- sdcard {
- label = "orange:sdcard";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- };
- };
-};
-
-&eth0 {
- status = "okay";
-};
-
-&eth0port {
- speed = <1000>;
- duplex = <1>;
-};
-
-&eth1 {
- status = "okay";
-};
-
-&eth1port {
- phy-handle = <&ethphyb>;
-};
-
-&mdio {
- status = "okay";
-
- ethphyb: ethernet-phy@b {
- reg = <0x0b>;
-
- marvell,reg-init =
- /* link-activity, bi-color mode 4 */
- <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
- };
-
- switch0: switch@11 {
- compatible = "marvell,mv88e6085";
- reg = <0x11>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "port1";
- };
-
- port@1 {
- reg = <1>;
- label = "port2";
- };
-
- port@2 {
- reg = <2>;
- label = "port3";
- };
-
- port@3 {
- reg = <3>;
- label = "port4";
- };
-
- port@5 {
- reg = <5>;
- phy-mode = "rgmii-id";
- ethernet = <&eth0port>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
-
-&nand {
- status = "okay";
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x000a0000>;
- read-only;
- };
-
- partition@a0000 {
- label = "u-boot-env";
- reg = <0x000a0000 0x00060000>;
- read-only;
- };
-
- partition@100000 {
- label = "kernel";
- reg = <0x00100000 0x00400000>;
- };
-
- partition@500000 {
- label = "ubi";
- reg = <0x00500000 0x1fb00000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pinctrl {
- pinctrl-0 = <&pmx_sysrst>;
- pinctrl-names = "default";
-
- pmx_sysrst: pmx-sysrst {
- marvell,pins = "mpp6";
- marvell,function = "sysrst";
- };
-
- pmx_sdio_cd: pmx-sdio-cd {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led34: pmx_led34 {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- pmx_led35: pmx_led35 {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
-
- pmx_led49: pmx_led49 {
- marvell,pins = "mpp49";
- marvell,function = "gpio";
- };
-};
-
-&rtc {
- status = "okay";
-};
-
-&sata_phy0 {
- status = "disabled";
-};
-
-&sata_phy1 {
- status = "disabled";
-};
-
-&sdio {
- pinctrl-0 = <&pmx_sdio_cd>;
- pinctrl-names = "default";
- status = "okay";
- cd-gpios = <&gpio0 28 9>;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts
deleted file mode 100644
index 9ff73382b3..0000000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-c200-v1.dts
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Ctera C200 V1 Board Description
- * Copyright 2021 Pawel Dembicki <paweldembicki@gmail.com>
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Ctera C200 V1";
- compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_green;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&pmx_buttons>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
- };
-
- usb1 {
- label = "USB1 Button";
- linux,code = <BTN_0>;
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
-
- usb2 {
- label = "USB2 Button";
- linux,code = <BTN_1>;
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_poweroff>;
- pinctrl-names = "default";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_leds>;
- pinctrl-names = "default";
-
- led_status_green: status-green {
- label = "green:status";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
-
- led_status_red: status-red {
- label = "red:status";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- };
-
- cloud-blue {
- label = "blue:cloud";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- disk1-green {
- label = "green:disk1";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata1";
- };
-
- disk1-red {
- label = "red:disk1";
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
- };
-
- disk2-green {
- label = "green:disk2";
- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ata2";
- };
-
- disk2-red {
- label = "red:disk2";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
-
- disk-fail-green {
- label = "green:disk-fail";
- gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-
- disk-fail-red {
- label = "red:disk-fail";
- gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
- };
-
- usb1-green {
- label = "green:usb1";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port2>;
- };
-
- usb1-red {
- label = "red:usb1";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- usb2-green {
- label = "green:usb2";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port1>;
- };
-
- usb2-red {
- label = "red:usb2";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&eth0 {
- status = "okay";
-};
-
-&eth0port {
- phy-handle = <&ethphy9>;
-};
-
-&i2c0 {
- status = "okay";
-
- rtc@30 {
- compatible = "s35390a";
- reg = <0x30>;
- };
-
- lm63@4c {
- compatible = "national,lm63";
- reg = <0x4c>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy9: ethernet-phy@9 {
- reg = <9>;
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <40>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x200000>;
- };
-
- partition@200000 {
- label = "certificate";
- reg = <0x0200000 0x100000>;
- };
-
- partition@300000 {
- label = "preset_cfg";
- reg = <0x0300000 0x100000>;
- };
-
- partition@400000 {
- label = "dev_params";
- reg = <0x0400000 0x100000>;
- };
- partition@500000 {
- label = "active_bank";
- reg = <0x0500000 0x0100000>;
- };
-
- partition@600000 {
- label = "magic";
- reg = <0x0600000 0x0100000>;
- };
-
- partition@700000 {
- label = "bank1";
- reg = <0x0700000 0x2800000>;
- };
-
- partition@2f00000 {
- label = "bank2";
- reg = <0x2f00000 0x2800000>;
- };
-
- /* 0x5700000-0x5a00000 undefined in vendor firmware */
-
- partition@5a00000 {
- label = "reserved";
- reg = <0x5a00000 0x2000000>;
- };
-
- partition@7a00000 {
- label = "ubi";
- reg = <0x7a00000 0x8600000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pinctrl {
- /* buzzer gpios are connected to two pins of buzzer
- * leave it as is due lack of proper driver
- */
- pmx_buzzer: pmx-buzzer {
- marvell,pins = "mpp12", "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_leds: pmx-leds {
- marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
- "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
- "mpp45", "mpp46", "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_buttons: pmx-buttons {
- marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
- marvell,function = "gpio";
- };
-
- pmx_poweroff: pmx-poweroff {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-};
-
-&rtc {
- status = "disabled";
-};
-
-&sata {
- status = "okay";
- nr-ports = <2>;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- #trigger-source-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- hub_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
-};
diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts
deleted file mode 100644
index a72276ed72..0000000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-nsa310s.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ZyXEL NSA310S";
- compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_green_sys;
- led-failsafe = &led_red_sys;
- led-running = &led_green_sys;
- led-upgrade = &led_red_sys;
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pinctrl-names = "default";
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_red: pmx-led-sys-red {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_green: pmx-led-hdd1-green {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_red: pmx-led-hdd1-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_pwr_sata1: pmx-pwr-sata1 {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- };
-
- i2c@11000 {
- status = "okay";
-
- rtc@68 {
- compatible = "htk,ht1382";
- reg = <0x68>;
- };
- };
-
- serial@12000 {
- status = "okay";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
- pinctrl-names = "default";
-
- usb0_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- };
-
- copy {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_green_sys: green-sys {
- label = "nsa310s:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
- led_red_sys: red-sys {
- label = "nsa310s:red:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- green-hdd1 {
- label = "nsa310s:green:hdd1";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- red-hdd1 {
- label = "nsa310s:red:hdd1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- green-usb {
- label = "nsa310s:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usb-host";
- };
-
- green-copy {
- label = "nsa310s:green:copy";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- };
-
- red-copy {
- label = "nsa310s:red:copy";
- gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
- };
-};
-
-
-&eth0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <&ethphy0>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii-id";
- marvell,reg-init = <0x1 0x16 0x0 0x3>,
- <0x1 0x10 0x0 0x1017>,
- <0x1 0x11 0x0 0x4408>,
- <0x1 0x16 0x0 0x0>;
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x00c0000>;
- read-only;
- };
- partition@c0000 {
- label = "uboot_env";
- reg = <0x00c0000 0x0080000>;
- };
- partition@140000 {
- label = "ubi";
- reg = <0x0140000 0x7ec0000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
- nr-ports = <1>;
-};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 17:43:28 +0000