aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/kirkwood/files-5.4/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/kirkwood/files-5.4/arch/arm')
-rw-r--r--target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts71
1 files changed, 53 insertions, 18 deletions
diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts
index eff9102d33..90250fefc8 100644
--- a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts
@@ -66,17 +66,6 @@
default-state = "on";
};
};
-
- mvsw61xx {
- compatible = "marvell,88e6171";
- status = "okay";
- reg = <0x10>;
-
- mii-bus = <&mdio>;
- cpu-port-0 = <5>;
- cpu-port-1 = <6>;
- is-indirect;
- };
};
&pinctrl {
@@ -96,6 +85,57 @@
};
};
+&mdio {
+ status = "okay";
+
+ switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "ethernet1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "ethernet2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "ethernet3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "ethernet4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "internet";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&eth0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
&nand {
status = "okay";
@@ -188,15 +228,10 @@
};
/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
+ * single CPU port. This port is disabled to avoid confusion.
*/
&eth1 {
- status = "okay";
-
- ethernet1-port@0 {
- speed = <1000>;
- duplex = <1>;
- };
+ status = "disabled";
};
/* There is no battery on the board, so the RTC does not keep