diff options
Diffstat (limited to 'target/linux/kirkwood/base-files/etc')
5 files changed, 29 insertions, 29 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds index a0b4eca04f..b8a9b479e4 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/01_leds +++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds @@ -10,37 +10,37 @@ board_config_update board=$(board_name) case "$board" in -"dockstar") +"seagate,dockstar") ucidef_set_led_default "health" "health" "status:green:health" "1" ucidef_set_led_default "fault" "fault" "status:orange:fault" "1" ;; -"linksys-audi") +"linksys,audi") ucidef_set_led_default "power" "power" "audi:green:power" "1" ;; -"linksys-viper") +"linksys,viper") ucidef_set_led_default "health" "health" "viper:white:health" "1" ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1" ;; -"goflexhome" | \ -"goflexnet") +"seagate,goflexhome" | \ +"seagate,goflexnet") ucidef_set_led_default "health" "health" "status:green:health" "1" ucidef_set_led_default "fault" "fault" "status:orange:fault" "0" ;; -"ib62x0") +"raidsonic,ib-nas62x0") ucidef_set_led_default "health" "health" "ib62x0:green:os" "1" ucidef_set_led_default "fault" "fault" "ib62x0:red:os" "1" ;; -"pogo_e02") +"cloudengines,pogoe02") ucidef_set_led_default "health" "health" "pogo_e02:green:health" "1" ucidef_set_led_default "fault" "fault" "pogo_e02:orange:fault" "1" ;; -"nsa310b") +"zyxel,nsa310b") ucidef_set_led_default "health" "health" "nsa310:green:sys" "1" ucidef_set_led_usbhost "usb" "USB" "nsa310:green:usb" ucidef_set_led_ataport "hdd" "HDD" "nsa310:green:hdd" "1" ucidef_set_led_ataport "esata" "eSata" "nsa310:green:esata" "2" ;; -"nsa325") +"zyxel,nsa325") ucidef_set_led_default "health" "health" "nsa325:green:sys" "1" ucidef_set_led_usbhost "usb" "USB" "nsa325:green:usb" ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:sata1" "1" diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 549d232df9..b83d0d25cc 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -11,24 +11,24 @@ board_config_update board=$(board_name) case "$board" in -"dockstar"|\ -"goflexhome"|\ -"goflexnet"|\ -"ib62x0"|\ -"iconnect"|\ -"pogo_e02") +"seagate,dockstar"|\ +"seagate,goflexhome"|\ +"seagate,goflexnet"|\ +"raidsonic,ib-nas62x0"|\ +"iom,iconnect-1.1"|\ +"cloudengines,pogoe02") ucidef_set_interface_lan "eth0" "dhcp" ;; -"linksys-audi"|\ -"linksys-viper") +"linksys,audi"|\ +"linksys,viper") ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1" ;; -"nsa310b"|"nsa325") +"zyxel,nsa310b"|"zyxel,nsa325") ucidef_set_interface_lan "eth0" "dhcp" ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr ) ;; -"on100") +"cisco,on100") ucidef_set_interface_lan "eth0 eth1" ;; *) diff --git a/target/linux/kirkwood/base-files/etc/diag.sh b/target/linux/kirkwood/base-files/etc/diag.sh index 71a1639c2a..0ff2ccb17a 100755 --- a/target/linux/kirkwood/base-files/etc/diag.sh +++ b/target/linux/kirkwood/base-files/etc/diag.sh @@ -6,24 +6,24 @@ get_status_led() { case $(board_name) in - dockstar|\ - goflexhome|\ - goflexnet) + seagate,dockstar|\ + seagate,goflexhome|\ + seagate,goflexnet) status_led="status:orange:fault" ;; - pogo_e02) + cloudengines,pogoe02) status_led="pogo_e02:orange:fault" ;; - linksys-audi) + linksys,audi) status_led="audi:green:power" ;; - linksys-viper) + linksys,viper) status_led="viper:white:health" ;; - nsa310b) + zyxel,nsa310b) status_led="nsa310:green:sys" ;; - on100) + cisco,on100) status_led="on100:green:health" ;; esac diff --git a/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery b/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery index ba7e4bb393..8fd2f387ab 100755 --- a/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery +++ b/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery @@ -6,7 +6,7 @@ boot() { . /lib/functions.sh case $(board_name) in - linksys-audi|linksys-viper) + linksys,audi|linksys,viper) # make sure auto_recovery in uboot is always on AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`" if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then diff --git a/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol b/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol index 4073c2d559..10eb5aa73c 100755 --- a/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol +++ b/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol @@ -10,7 +10,7 @@ boot() { path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0' case $(board_name) in - nsa310b) + zyxel,nsa310b) echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1 echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes echo 23000 > "$path_to_hwmon/temp1_auto_temp_min" |