aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ixp4xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ixp4xx')
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch91
-rw-r--r--target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch113
2 files changed, 167 insertions, 37 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
index 25709da4f0..2a1f2415f7 100644
--- a/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/016-dsmg600_auto_power_on.patch
@@ -1,13 +1,40 @@
+Upgrade the power and reset button handling for the DSMG600:
+ * Remove the superfluous declaration of ctrl_alt_del().
+ * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
+ * Perform the reset on the release of the power button, so that
+ NAS devices which have been set to auto-power-on (by bridging
+ the power button) do not continuously power cycle.
+ * Remove all superflous constants from dsmg600.h
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
---
- arch/arm/mach-ixp4xx/dsmg600-power.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
+ arch/arm/mach-ixp4xx/dsmg600-power.c | 24 ++++++++++++++----------
+ include/asm-arm/arch-ixp4xx/dsmg600.h | 7 +------
+ 2 files changed, 15 insertions(+), 16 deletions(-)
-Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
===================================================================
---- linux-2.6.22-rc5-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-power.c
-+++ linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
-@@ -50,6 +50,13 @@
- if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/dsmg600-power.c 2008-01-11 16:20:26.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c 2008-01-11 16:20:30.000000000 +1030
+@@ -26,10 +26,9 @@
+ #include <linux/jiffies.h>
+ #include <linux/timer.h>
+
++#include <asm/gpio.h>
+ #include <asm/mach-types.h>
+
+-extern void ctrl_alt_del(void);
+-
+ /* This is used to make sure the power-button pusher is serious. The button
+ * must be held until the value of this counter reaches zero.
+ */
+@@ -47,9 +46,16 @@
+ * state of the power button.
+ */
+
+- if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
++ if (gpio_get_value(DSMG600_PB_GPIO)) {
/* IO Pin is 1 (button pushed) */
+ if (power_button_countdown > 0) {
@@ -20,7 +47,7 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
if (power_button_countdown == 0) {
/* Signal init to do the ctrlaltdel action, this will bypass
* init if it hasn't started and do a kernel_restart.
-@@ -58,11 +65,9 @@
+@@ -58,11 +64,9 @@
/* Change the state of the power LED to "blink" */
gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
@@ -34,3 +61,51 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/dsmg600-power.c
}
mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+@@ -81,12 +85,12 @@
+ if (!(machine_is_dsmg600()))
+ return 0;
+
+- if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
++ if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
+ NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+- DSMG600_RB_IRQ);
++ gpio_to_irq(DSMG600_RB_GPIO));
+
+ return -EIO;
+ }
+@@ -114,7 +118,7 @@
+
+ del_timer_sync(&dsmg600_power_timer);
+
+- free_irq(DSMG600_RB_IRQ, NULL);
++ free_irq(gpio_to_irq(DSMG600_RB_GPIO), NULL);
+ }
+
+ module_init(dsmg600_power_init);
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h
+===================================================================
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/dsmg600.h 2008-01-11 16:20:26.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/dsmg600.h 2008-01-11 16:20:30.000000000 +1030
+@@ -40,18 +40,13 @@
+ /* Buttons */
+
+ #define DSMG600_PB_GPIO 15 /* power button */
+-#define DSMG600_PB_BM (1L << DSMG600_PB_GPIO)
+-
+ #define DSMG600_RB_GPIO 3 /* reset button */
+
+-#define DSMG600_RB_IRQ IRQ_IXP4XX_GPIO3
++/* Power control */
+
+ #define DSMG600_PO_GPIO 2 /* power off */
+
+ /* LEDs */
+
+ #define DSMG600_LED_PWR_GPIO 0
+-#define DSMG600_LED_PWR_BM (1L << DSMG600_LED_PWR_GPIO)
+-
+ #define DSMG600_LED_WLAN_GPIO 14
+-#define DSMG600_LED_WLAN_BM (1L << DSMG600_LED_WLAN_GPIO)
diff --git a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch b/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
index 232dd9a8c5..b77df4850b 100644
--- a/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
+++ b/target/linux/ixp4xx/patches-2.6.23/017-nas100d_auto_power_on.patch
@@ -1,19 +1,27 @@
----
- arch/arm/mach-ixp4xx/nas100d-power.c | 68 ++++++++++++++++++++++++++++++++--
- include/asm-arm/arch-ixp4xx/nas100d.h | 18 +++++----
- 2 files changed, 75 insertions(+), 11 deletions(-)
+Upgrade the power and reset button handling for the NAS100D:
+ * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
+ * Perform the reset only after the power button has been held down
+ for at least two seconds. Do the reset on the release of the power
+ button, so that NAS devices which have been set to auto-power-on (by
+ bridging the power button) do not continuously power cycle.
+ * Remove all superflous constants from nas100d.h
+ * Add LED constants to nas100d.h while we're there.
+Also, update the board LED setup code to use constants.
-Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
===================================================================
---- linux-2.6.22-rc5-armeb.orig/arch/arm/mach-ixp4xx/nas100d-power.c
-+++ linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
-@@ -21,15 +21,60 @@
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-power.c 2008-01-11 16:59:20.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-power.c 2008-01-11 17:03:23.000000000 +1030
+@@ -21,15 +21,61 @@
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/reboot.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
++#include <asm/gpio.h>
#include <asm/mach-types.h>
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
@@ -39,7 +47,7 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
*/
- ctrl_alt_del();
+
-+ if (*IXP4XX_GPIO_GPINR & NAS100D_PB_BM) {
++ if (gpio_get_value(NAS100D_PB_GPIO)) {
+
+ /* IO Pin is 1 (button pushed) */
+ if (power_button_countdown > 0) {
@@ -72,7 +80,21 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
return IRQ_HANDLED;
}
-@@ -50,6 +95,19 @@
+@@ -39,17 +85,30 @@
+ if (!(machine_is_nas100d()))
+ return 0;
+
+- set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
++ set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
+
+- if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
++ if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
+ IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+- NAS100D_RB_IRQ);
++ gpio_to_irq(NAS100D_RB_GPIO));
+
return -EIO;
}
@@ -92,42 +114,75 @@ Index: linux-2.6.22-rc5-armeb/arch/arm/mach-ixp4xx/nas100d-power.c
return 0;
}
-@@ -58,6 +116,8 @@
+@@ -58,7 +117,9 @@
if (!(machine_is_nas100d()))
return;
+- free_irq(NAS100D_RB_IRQ, NULL);
+ del_timer_sync(&nas100d_power_timer);
+
- free_irq(NAS100D_RB_IRQ, NULL);
++ free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
}
-Index: linux-2.6.22-rc5-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
+ module_init(nas100d_power_init);
+Index: linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
===================================================================
---- linux-2.6.22-rc5-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h
-+++ linux-2.6.22-rc5-armeb/include/asm-arm/arch-ixp4xx/nas100d.h
-@@ -39,14 +39,18 @@
+--- linux-2.6.23.12-armeb.orig/include/asm-arm/arch-ixp4xx/nas100d.h 2008-01-11 16:59:20.000000000 +1030
++++ linux-2.6.23.12-armeb/include/asm-arm/arch-ixp4xx/nas100d.h 2008-01-11 17:03:23.000000000 +1030
+@@ -38,15 +38,15 @@
+
/* Buttons */
- #define NAS100D_PB_GPIO 14
-+#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO)
+-#define NAS100D_PB_GPIO 14
+-#define NAS100D_RB_GPIO 4
++#define NAS100D_PB_GPIO 14 /* power button */
++#define NAS100D_RB_GPIO 4 /* reset button */
++
++/* Power control */
+
- #define NAS100D_RB_GPIO 4
--#define NAS100D_PO_GPIO 12 /* power off */
+ #define NAS100D_PO_GPIO 12 /* power off */
-#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
- #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
+-#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
++/* LEDs */
-/*
-#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO)
-#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO)
-#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO)
-*/
-+#define NAS100D_PO_GPIO 12 /* power off */
-+
-+/* LEDs */
-+
-+#define NAS100D_LED_PWR_GPIO 15
-+#define NAS100D_LED_PWR_BM (1L << NAS100D_LED_PWR_GPIO)
-+
+#define NAS100D_LED_WLAN_GPIO 0
-+#define NAS100D_LED_WLAN_BM (1L << NAS100D_LED_WLAN_GPIO)
++#define NAS100D_LED_DISK_GPIO 3
++#define NAS100D_LED_PWR_GPIO 15
+Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c
+===================================================================
+--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nas100d-setup.c 2008-01-11 17:03:23.000000000 +1030
++++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nas100d-setup.c 2008-01-11 17:06:15.000000000 +1030
+@@ -44,20 +44,20 @@
+ static struct resource nas100d_led_resources[] = {
+ {
+ .name = "wlan", /* green led */
+- .start = 0,
+- .end = 0,
++ .start = NAS100D_LED_WLAN_GPIO,
++ .end = NAS100D_LED_WLAN_GPIO,
+ .flags = IXP4XX_GPIO_LOW,
+ },
+ {
+- .name = "ready", /* blue power led (off is flashing!) */
+- .start = 15,
+- .end = 15,
++ .name = "power", /* blue power led (off is flashing!) */
++ .start = NAS100D_LED_PWR_GPIO,
++ .end = NAS100D_LED_PWR_GPIO,
+ .flags = IXP4XX_GPIO_LOW,
+ },
+ {
+ .name = "disk", /* yellow led */
+- .start = 3,
+- .end = 3,
++ .start = NAS100D_LED_DISK_GPIO,
++ .end = NAS100D_LED_DISK_GPIO,
+ .flags = IXP4XX_GPIO_LOW,
+ },
+ };
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:23:59 +0000