diff options
Diffstat (limited to 'target/linux/ixp4xx')
16 files changed, 32 insertions, 186 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch index 6e12caa440..4d2e4a1d34 100644 --- a/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch @@ -112,7 +112,7 @@ +subsys_initcall(wg302v1_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c -@@ -0,0 +1,142 @@ +@@ -0,0 +1,140 @@ +/* + * arch/arm/mach-ixp4xx/wg302v1-setup.c + * @@ -246,8 +246,6 @@ +#ifdef CONFIG_MACH_WG302V1 +MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch index f3e088b4a0..805dedc111 100644 --- a/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch @@ -19,7 +19,7 @@ + bool "ADI Pronghorn series" + select PCI + help -+ Say 'Y' here if you want your kernel to support the ADI ++ Say 'Y' here if you want your kernel to support the ADI + Engineering Pronghorn series. For more + information on this platform, see http://www.adiengineering.com + @@ -127,7 +127,7 @@ +subsys_initcall(pronghorn_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c -@@ -0,0 +1,245 @@ +@@ -0,0 +1,241 @@ +/* + * arch/arm/mach-ixp4xx/pronghorn-setup.c + * @@ -354,8 +354,6 @@ + +MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, @@ -365,8 +363,6 @@ + +MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch index 2ec3d95117..6ccedd5304 100644 --- a/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch @@ -130,7 +130,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> +subsys_initcall(sidewinder_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c -@@ -0,0 +1,149 @@ +@@ -0,0 +1,147 @@ +/* + * arch/arm/mach-ixp4xx/sidewinder-setup.c + * @@ -272,8 +272,6 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch index c549314957..b11ffd975c 100644 --- a/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch @@ -50,7 +50,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- /dev/null +++ b/arch/arm/mach-ixp4xx/compex-setup.c -@@ -0,0 +1,136 @@ +@@ -0,0 +1,134 @@ +/* + * arch/arm/mach-ixp4xx/compex-setup.c + * @@ -179,8 +179,6 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +MACHINE_START(COMPEX, "Compex WP18 / NP18A") + /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch index 865bb9d972..4e84e7aac7 100644 --- a/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch @@ -103,7 +103,7 @@ +subsys_initcall(wrt300nv2_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c -@@ -0,0 +1,108 @@ +@@ -0,0 +1,106 @@ +/* + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c + * @@ -203,8 +203,6 @@ +#ifdef CONFIG_MACH_WRT300NV2 +MACHINE_START(WRT300NV2, "Linksys WRT300N v2") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch index 16f19baf23..8b7c98eb73 100644 --- a/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c -@@ -0,0 +1,151 @@ +@@ -0,0 +1,149 @@ +/* + * arch/arm/mach-ixp4xx/ap1000-setup.c + * @@ -142,8 +142,6 @@ +#ifdef CONFIG_MACH_AP1000 +MACHINE_START(AP1000, "Lanready AP-1000") + /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .fixup = ap1000_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, diff --git a/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch index 684db44751..e84ce9b582 100644 --- a/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch +++ b/target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch @@ -37,10 +37,10 @@ static void __init wg302v1_init(void) { ixp4xx_sys_init(); -@@ -133,6 +163,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1 +@@ -131,6 +161,7 @@ static void __init wg302v1_init(void) + #ifdef CONFIG_MACH_WG302V1 + MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1") /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .fixup = wg302v1_fixup, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, diff --git a/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch index e92d4614a0..d609cd7d4b 100644 --- a/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch @@ -35,7 +35,7 @@ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- /dev/null +++ b/arch/arm/mach-ixp4xx/tw5334-setup.c -@@ -0,0 +1,163 @@ +@@ -0,0 +1,161 @@ +/* + * arch/arm/mach-ixp4xx/tw5334-setup.c + * @@ -190,8 +190,6 @@ +#ifdef CONFIG_MACH_TW5334 +MACHINE_START(TW5334, "Titan Wireless TW-533-4") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch index d85d3d1132..85c3e64263 100644 --- a/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch @@ -74,7 +74,7 @@ + --- /dev/null +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c -@@ -0,0 +1,344 @@ +@@ -0,0 +1,342 @@ +/* + * arch/arm/mach-ixp4xx/mi424wr-setup.c + * @@ -410,8 +410,6 @@ + +MACHINE_START(MI424WR, "Actiontec MI424WR") + /* Maintainer: Jose Vasconcellos */ -+ .phys_io = IXP4XX_UART2_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch index 683d8be68a..32199d8c31 100644 --- a/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch @@ -77,7 +77,7 @@ +subsys_initcall(cambria_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/cambria-setup.c -@@ -0,0 +1,429 @@ +@@ -0,0 +1,427 @@ +/* + * arch/arm/mach-ixp4xx/cambria-setup.c + * @@ -499,8 +499,6 @@ + +MACHINE_START(CAMBRIA, "Gateworks Cambria series") + /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch index 099980b80a..603cf3cc66 100644 --- a/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch +++ b/target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch @@ -124,7 +124,7 @@ unsigned int custom_divisor; --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c -@@ -412,6 +412,20 @@ static void mem_serial_out(struct uart_p +@@ -413,6 +413,20 @@ static void mem_serial_out(struct uart_p writeb(value, p->membase + offset); } @@ -145,7 +145,7 @@ static void mem32_serial_out(struct uart_port *p, int offset, int value) { offset = map_8250_out_reg(p, offset) << p->regshift; -@@ -503,6 +517,11 @@ static void set_io_from_upio(struct uart +@@ -504,6 +518,11 @@ static void set_io_from_upio(struct uart p->serial_out = mem32_serial_out; break; @@ -157,7 +157,7 @@ case UPIO_AU: p->serial_in = au_serial_in; p->serial_out = au_serial_out; -@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u +@@ -535,6 +554,7 @@ serial_out_sync(struct uart_8250_port *u switch (p->iotype) { case UPIO_MEM: case UPIO_MEM32: @@ -165,7 +165,7 @@ case UPIO_AU: case UPIO_DWAPB: p->serial_out(p, offset, value); -@@ -2476,6 +2496,7 @@ static int serial8250_request_std_resour +@@ -2477,6 +2497,7 @@ static int serial8250_request_std_resour case UPIO_MEM32: case UPIO_MEM: case UPIO_DWAPB: @@ -173,7 +173,7 @@ if (!up->port.mapbase) break; -@@ -2513,6 +2534,7 @@ static void serial8250_release_std_resou +@@ -2514,6 +2535,7 @@ static void serial8250_release_std_resou case UPIO_MEM32: case UPIO_MEM: case UPIO_DWAPB: @@ -181,7 +181,7 @@ if (!up->port.mapbase) break; -@@ -3024,6 +3046,7 @@ static int __devinit serial8250_probe(st +@@ -3025,6 +3047,7 @@ static int __devinit serial8250_probe(st port.set_termios = p->set_termios; port.pm = p->pm; port.dev = &dev->dev; @@ -189,7 +189,7 @@ port.irqflags |= irqflag; ret = serial8250_register_port(&port); if (ret < 0) { -@@ -3173,6 +3196,7 @@ int serial8250_register_port(struct uart +@@ -3174,6 +3197,7 @@ int serial8250_register_port(struct uart uart->port.iotype = port->iotype; uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; uart->port.mapbase = port->mapbase; @@ -199,7 +199,7 @@ uart->port.dev = port->dev; --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c -@@ -2130,6 +2130,7 @@ uart_report_port(struct uart_driver *drv +@@ -2129,6 +2129,7 @@ uart_report_port(struct uart_driver *drv snprintf(address, sizeof(address), "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); break; @@ -207,7 +207,7 @@ case UPIO_MEM: case UPIO_MEM32: case UPIO_AU: -@@ -2550,6 +2551,7 @@ int uart_match_port(struct uart_port *po +@@ -2549,6 +2550,7 @@ int uart_match_port(struct uart_port *po case UPIO_HUB6: return (port1->iobase == port2->iobase) && (port1->hub6 == port2->hub6); diff --git a/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch index 171898d6c7..299630f171 100644 --- a/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch +++ b/target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch @@ -90,7 +90,7 @@ } static struct cambria_board_info cambria_boards[] __initdata = { -@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata +@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata I2C_BOARD_INFO("24c08", 0x51), .platform_data = &cambria_eeprom_info }, diff --git a/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch index 1dc2690ac1..4d399f75dc 100644 --- a/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch +++ b/target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -176,6 +176,13 @@ config LEDS_LP3944 - To compile this driver as a module, choose M here: the - module will be called leds-lp3944. +@@ -210,6 +210,13 @@ config LEDS_LP5523 + Driver provides direct control via LED class and interface for + programming the engines. +config LEDS_LATCH + tristate "LED Support for Memory Latched LEDs" @@ -13,7 +13,7 @@ + config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" - depends on X86 && SERIO_I8042 && DMI + depends on LEDS_CLASS --- /dev/null +++ b/drivers/leds/leds-latch.c @@ -0,0 +1,150 @@ @@ -175,11 +175,11 @@ obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o +obj-$(CONFIG_LEDS_LATCH) += leds-latch.o obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o - obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o - obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o + obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o + obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o --- a/include/linux/leds.h +++ b/include/linux/leds.h -@@ -165,5 +165,19 @@ struct gpio_led_platform_data { +@@ -204,5 +204,19 @@ struct gpio_led_platform_data { unsigned long *delay_off); }; diff --git a/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch index e757ff301c..3c32295947 100644 --- a/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch @@ -116,7 +116,7 @@ +subsys_initcall(usr8200_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/usr8200-setup.c -@@ -0,0 +1,212 @@ +@@ -0,0 +1,210 @@ +/* + * arch/arm/mach-ixp4xx/usr8200-setup.c + * @@ -321,8 +321,6 @@ + +MACHINE_START(USR8200, "USRobotics USR8200") + /* Maintainer: Peter Denison <openwrt@marshadder.org> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, diff --git a/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch b/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch index 3fde579c10..8b50b90cb4 100644 --- a/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch +++ b/target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch @@ -118,7 +118,7 @@ +subsys_initcall(tw2662_pci_init); --- /dev/null +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c -@@ -0,0 +1,212 @@ +@@ -0,0 +1,210 @@ +/* + * arch/arm/mach-ixp4xx/tw2662-setup.c + * @@ -321,8 +321,6 @@ +#ifdef CONFIG_MACH_TW2662 +MACHINE_START(TW2662, "Titan Wireless TW-266-2") + /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */ -+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .fixup = tw2662_fixup, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, diff --git a/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch b/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch deleted file mode 100644 index 76b6a3e97c..0000000000 --- a/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch +++ /dev/null @@ -1,130 +0,0 @@ ---- a/arch/arm/mach-ixp4xx/ap1000-setup.c -+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c -@@ -167,8 +167,6 @@ static void __init ap1000_init(void) - #ifdef CONFIG_MACH_AP1000 - MACHINE_START(AP1000, "Lanready AP-1000") - /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .fixup = ap1000_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, ---- a/arch/arm/mach-ixp4xx/cambria-setup.c -+++ b/arch/arm/mach-ixp4xx/cambria-setup.c -@@ -563,8 +563,6 @@ late_initcall(cambria_model_setup); - - MACHINE_START(CAMBRIA, "Gateworks Cambria series") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/compex-setup.c -+++ b/arch/arm/mach-ixp4xx/compex-setup.c -@@ -126,8 +126,6 @@ static void __init compex_init(void) - - MACHINE_START(COMPEX, "Compex WP18 / NP18A") - /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/mi424wr-setup.c -+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c -@@ -333,8 +333,6 @@ static void __init mi424wr_init(void) - - MACHINE_START(MI424WR, "Actiontec MI424WR") - /* Maintainer: Jose Vasconcellos */ -- .phys_io = IXP4XX_UART2_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c -+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c -@@ -224,8 +224,6 @@ static void __init pronghorn_init(void) - - MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, -@@ -235,8 +233,6 @@ MACHINE_END - - MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/sidewinder-setup.c -+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c -@@ -139,8 +139,6 @@ static void __init sidewinder_init(void) - - MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/tw2662-setup.c -+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c -@@ -200,8 +200,6 @@ static void __init tw2662_init(void) - #ifdef CONFIG_MACH_TW2662 - MACHINE_START(TW2662, "Titan Wireless TW-266-2") - /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .fixup = tw2662_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, ---- a/arch/arm/mach-ixp4xx/tw5334-setup.c -+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c -@@ -152,8 +152,6 @@ static void __init tw5334_init(void) - #ifdef CONFIG_MACH_TW5334 - MACHINE_START(TW5334, "Titan Wireless TW-533-4") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/usr8200-setup.c -+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c -@@ -202,8 +202,6 @@ static void __init usr8200_init(void) - - MACHINE_START(USR8200, "USRobotics USR8200") - /* Maintainer: Peter Denison <openwrt@marshadder.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, ---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c -+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c -@@ -161,8 +161,6 @@ static void __init wg302v1_init(void) - #ifdef CONFIG_MACH_WG302V1 - MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .fixup = wg302v1_fixup, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, ---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c -+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c -@@ -157,8 +157,6 @@ static void __init wrt300nv2_init(void) - #ifdef CONFIG_MACH_WRT300NV2 - MACHINE_START(WRT300NV2, "Linksys WRT300N v2") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, -- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, |