diff options
Diffstat (limited to 'target/linux/ipq807x')
5 files changed, 557 insertions, 3 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network index a6ff418a19..273547dc22 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/ipq807x/base-files/etc/board.d/02_network @@ -21,6 +21,9 @@ ipq807x_setup_interfaces() xiaomi,ax3600) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" ;; + xiaomi,ax9000) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" + ;; *) echo "Unsupported hardware. Network interfaces not initialized" ;; diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index fd431d07da..7ac05f2992 100644 --- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -12,11 +12,19 @@ case "$FIRMWARE" in edimax,cax1800|\ qnap,301w|\ redmi,ax6|\ - xiaomi,ax3600) + xiaomi,ax3600|\ + xiaomi,ax9000) caldata_extract "0:art" 0x1000 0x20000 ;; esac ;; +"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin") + case "$board" in + xiaomi,ax9000) + caldata_extract "0:art" 0x26800 0x20000 + ;; + esac + ;; *) exit 1 ;; diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh index 9e8f4796cf..fe20412083 100644 --- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh @@ -34,7 +34,8 @@ platform_check_image() { platform_pre_upgrade() { case "$(board_name)" in redmi,ax6|\ - xiaomi,ax3600) + xiaomi,ax3600|\ + xiaomi,ax9000) xiaomi_initramfs_prepare ;; esac @@ -51,7 +52,8 @@ platform_do_upgrade() { mmc_do_upgrade "$1" ;; redmi,ax6|\ - xiaomi,ax3600) + xiaomi,ax3600|\ + xiaomi,ax9000) # Make sure that UART is enabled fw_setenv boot_wait on fw_setenv uart_en 1 diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts new file mode 100644 index 0000000000..801aa05604 --- /dev/null +++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */ + +/dts-v1/; + +#include "ipq8074.dtsi" +#include "ipq8074-hk-cpu.dtsi" +#include "ipq8074-ess.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Xiaomi AX9000"; + compatible = "xiaomi,ax9000", "qcom,ipq8074"; + + aliases { + serial0 = &blsp1_uart5; + led-boot = &led_system_yellow; + led-failsafe = &led_system_yellow; + led-running = &led_system_blue; + led-upgrade = &led_system_yellow; + label-mac-device = &dp5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " root=/dev/ubiblock0_0"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; /* Labeled Mesh on the device */ + gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system_blue: system-blue { + label = "blue:system"; + gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + }; + + led_system_yellow: system-yellow { + label = "yellow:system"; + gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_YELLOW>; + }; + + network-yellow { + label = "yellow:network"; + gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_YELLOW>; + }; + + network-blue { + label = "blue:network"; + gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + }; + + top-red { + label = "red:top"; + gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + default-state = "keep"; + }; + + top-green { + label = "green:top"; + gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + default-state = "keep"; + }; + + top-blue { + label = "blue:top"; + gpios = <&tlmm 66 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + default-state = "keep"; + }; + }; +}; + +&tlmm { + mdio_pins: mdio-pins { + mdc { + pins = "gpio68"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio { + pins = "gpio69"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + i2c_pins: i2c-pins { + pins = "gpio0", "gpio2"; + function = "blsp5_i2c"; + drive-strength = <8>; + bias-disable; + }; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&blsp1_i2c6 { + status = "okay"; + + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; +}; + +&prng { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + /* + * Bootloader will find the NAND DT node by the compatible and + * then "fixup" it by adding the partitions from the SMEM table + * using the legacy bindings thus making it impossible for us + * to change the partition table or utilize NVMEM for calibration. + * So add a dummy partitions node that bootloader will populate + * and set it as disabled so the kernel ignores it instead of + * printing warnings due to the broken way bootloader adds the + * partitions. + */ + partitions { + status = "disabled"; + }; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:sbl1"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "0:mibib"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "0:bootconfig"; + reg = <0x200000 0x80000>; + read-only; + }; + + partition@280000 { + label = "0:bootconfig1"; + reg = <0x280000 0x80000>; + read-only; + }; + + partition@300000 { + label = "0:qsee"; + reg = <0x300000 0x300000>; + read-only; + }; + + partition@600000 { + label = "0:qsee_1"; + reg = <0x600000 0x300000>; + read-only; + }; + + partition@900000 { + label = "0:devcfg"; + reg = <0x900000 0x80000>; + read-only; + }; + + partition@980000 { + label = "0:devcfg_1"; + reg = <0x980000 0x80000>; + read-only; + }; + + partition@a00000 { + label = "0:apdp"; + reg = <0xa00000 0x80000>; + read-only; + }; + + partition@a80000 { + label = "0:apdp_1"; + reg = <0xa80000 0x80000>; + read-only; + }; + + partition@b00000 { + label = "0:rpm"; + reg = <0xb00000 0x80000>; + read-only; + }; + + partition@b80000 { + label = "0:rpm_1"; + reg = <0xb80000 0x80000>; + read-only; + }; + + partition@c00000 { + label = "0:cdt"; + reg = <0xc00000 0x80000>; + read-only; + }; + + partition@c80000 { + label = "0:cdt_1"; + reg = <0xc80000 0x80000>; + read-only; + }; + + partition@d00000 { + label = "0:appsblenv"; + reg = <0xd00000 0x80000>; + }; + + partition@d80000 { + label = "0:appsbl"; + reg = <0xd80000 0x100000>; + read-only; + }; + + partition@e80000 { + label = "0:appsbl_1"; + reg = <0xe80000 0x100000>; + read-only; + }; + + partition@f80000 { + label = "0:art"; + reg = <0xf80000 0x80000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_dp1: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_dp2: macaddr@6 { + reg = <0x6 0x6>; + }; + + macaddr_dp3: macaddr@c { + reg = <0xc 0x6>; + }; + + macaddr_dp4: macaddr@12 { + reg = <0x12 0x6>; + }; + + macaddr_dp5: macaddr@18 { + reg = <0x18 0x6>; + }; + + caldata_qca9889: caldata@4d000 { + reg = <0x4d000 0x844>; + }; + }; + + partition@1000000 { + label = "bdata"; + reg = <0x1000000 0x80000>; + }; + + partition@1080000 { + /* This is crash + crash_syslog parts combined */ + label = "pstore"; + reg = <0x1080000 0x100000>; + }; + + partition@1180000 { + label = "ubi_kernel"; + reg = <0x1180000 0x3800000>; + }; + + partition@4980000 { + label = "rootfs"; + reg = <0x4980000 0xb680000>; + }; + }; + }; +}; + +&qusb_phy_0 { + status = "okay"; +}; + +&ssphy_0 { + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + + qca8075_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + qca8075_1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + + qca8075_2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + + qca8075_3: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + }; + + qca8081: ethernet-phy@24 { + compatible = "ethernet-phy-id004d.d101"; + reg = <24>; + reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + }; +}; + +&switch { + status = "okay"; + + switch_cpu_bmp = <0x1>; /* cpu port bitmap */ + switch_lan_bmp = <0x1e>; /* lan port bitmap */ + switch_wan_bmp = <0x20>; /* wan port bitmap */ + switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/ + switch_mac_mode1 = <0xc>; /* mac mode for uniphy instance1*/ + switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/ + bm_tick_mode = <0>; /* bm tick mode */ + tm_tick_mode = <0>; /* tm tick mode */ + + qcom,port_phyinfo { + port@0 { + port_id = <1>; + phy_address = <0>; + }; + port@1 { + port_id = <2>; + phy_address = <1>; + }; + port@2 { + port_id = <3>; + phy_address = <2>; + }; + port@3 { + port_id = <4>; + phy_address = <3>; + }; + port@4 { + port_id = <5>; + phy_address = <24>; + port_mac_sel = "QGMAC_PORT"; + }; + }; +}; + +&edma { + status = "okay"; +}; + +&dp1 { + status = "okay"; + phy-handle = <&qca8075_0>; + label = "lan4"; + nvmem-cells = <&macaddr_dp1>; + nvmem-cell-names = "mac-address"; +}; + +&dp2 { + status = "okay"; + phy-handle = <&qca8075_1>; + label = "lan3"; + nvmem-cells = <&macaddr_dp2>; + nvmem-cell-names = "mac-address"; +}; + +&dp3 { + status = "okay"; + phy-handle = <&qca8075_2>; + label = "lan2"; + nvmem-cells = <&macaddr_dp3>; + nvmem-cell-names = "mac-address"; +}; + +&dp4 { + status = "okay"; + phy-handle = <&qca8075_3>; + label = "lan1"; + nvmem-cells = <&macaddr_dp4>; + nvmem-cell-names = "mac-address"; +}; + +&dp5 { + status = "okay"; + phy-handle = <&qca8081>; + label = "wan"; + nvmem-cells = <&macaddr_dp5>; + nvmem-cell-names = "mac-address"; +}; + +&pcie_qmp0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + status = "okay"; + + /* ath11k has no DT compatible for PCI cards */ + compatible = "pci17cb,1104"; + reg = <0x00010000 0 0 0 0>; + + qcom,ath11k-calibration-variant = "Xiaomi-AX9000"; + }; + }; +}; + +&pcie_qmp1 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + + perst-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>; + + bridge@1,0 { + reg = <0x00010000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + status = "okay"; + + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + + qcom,ath10k-calibration-variant = "Xiaomi-AX9000"; + nvmem-cell-names = "calibration"; + nvmem-cells = <&caldata_qca9889>; + }; + }; +}; + +&wifi { + status = "okay"; + + qcom,ath11k-calibration-variant = "Xiaomi-AX9000"; +}; diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk index 7bf659f80f..ae0d6d2ad0 100644 --- a/target/linux/ipq807x/image/generic.mk +++ b/target/linux/ipq807x/image/generic.mk @@ -70,3 +70,22 @@ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) endif endef TARGET_DEVICES += xiaomi_ax3600 + +define Device/xiaomi_ax9000 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := Xiaomi + DEVICE_MODEL := AX9000 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_DTS_CONFIG := config@hk14 + SOC := ipq8072 + KERNEL_SIZE := 57344k + DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \ + kmod-ath10k-ct ath10k-firmware-qca9887-ct +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + ARTIFACTS := initramfs-factory.ubi + ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel +endif +endef +TARGET_DEVICES += xiaomi_ax9000 |