1 files changed, 0 insertions, 54 deletions
diff --git a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
deleted file mode 100644
index 6a525f2c3e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 72bc31aa621e21a7c36a7da8aa6f6a77bb234e0b Mon Sep 17 00:00:00 2001
-From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
-Date: Wed, 6 Jul 2022 15:41:29 +0200
-Subject: [PATCH] clk: qcom: reset: Allow specifying custom reset delay
-
-The amount of time required between asserting and deasserting the reset
-signal can vary depending on the involved hardware component. Sometimes
-1 us might not be enough and a larger delay is necessary to conform to
-the specifications.
-
-Usually this is worked around in the consuming drivers, by replacing
-reset_control_reset() with a sequence of reset_control_assert(), waiting
-for a custom delay, followed by reset_control_deassert().
-
-However, in some cases the driver making use of the reset is generic and
-can be used with different reset controllers. In this case the reset
-time requirement is better handled directly by the reset controller
-driver.
-
-Make this possible by adding an "udelay" field to the qcom_reset_map
-that allows setting a different reset delay (in microseconds).
-
-Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
----
- drivers/clk/qcom/reset.c | 4 +++-
- drivers/clk/qcom/reset.h | 1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/qcom/reset.c
-+++ b/drivers/clk/qcom/reset.c
-@@ -13,8 +13,10 @@
- 
- static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
- {
-+	struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev);
-+
- 	rcdev->ops->assert(rcdev, id);
--	udelay(1);
-+	udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */
- 	rcdev->ops->deassert(rcdev, id);
- 	return 0;
- }
---- a/drivers/clk/qcom/reset.h
-+++ b/drivers/clk/qcom/reset.h
-@@ -11,6 +11,7 @@
- struct qcom_reset_map {
- 	unsigned int reg;
- 	u8 bit;
-+	u8 udelay;
- };
- 
- struct regmap;