aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x')
-rw-r--r--target/linux/ipq806x/Makefile2
-rw-r--r--target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi2
-rw-r--r--target/linux/ipq806x/modules.mk17
-rw-r--r--target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch46
-rw-r--r--target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch56
-rw-r--r--target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch74
-rw-r--r--target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch32
-rw-r--r--target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch46
-rw-r--r--target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch101
-rw-r--r--target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch258
-rw-r--r--target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch273
-rw-r--r--target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch104
-rw-r--r--target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch71
-rw-r--r--target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch (renamed from target/linux/ipq806x/patches-4.4/097-usb-dwc3-add-generic-OF-glue-layer.patch)0
-rw-r--r--target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch (renamed from target/linux/ipq806x/patches-4.4/098-usb-dwc3-of-simple-fix-build-warning-on-PM.patch)0
-rw-r--r--target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch (renamed from target/linux/ipq806x/patches-4.4/099-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch)0
-rw-r--r--target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch31
-rw-r--r--target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch4
18 files changed, 1094 insertions, 23 deletions
diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile
index 27ad6a4a06..3a65d334aa 100644
--- a/target/linux/ipq806x/Makefile
+++ b/target/linux/ipq806x/Makefile
@@ -19,7 +19,7 @@ DEFAULT_PACKAGES += \
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \
kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
- kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
+ kmod-usb3 kmod-usb-dwc3-of-simple kmod-usb-phy-qcom-dwc3 \
kmod-ath10k wpad-mini \
uboot-envtools
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
index 435692b183..e0ba99a41c 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -790,7 +790,6 @@
interrupts = <0 110 0x4>;
phys = <&hs_phy_0>, <&ss_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
- tx-fifo-resize;
dr_mode = "host";
};
};
@@ -812,7 +811,6 @@
interrupts = <0 205 0x4>;
phys = <&hs_phy_1>, <&ss_phy_1>;
phy-names = "usb2-phy", "usb3-phy";
- tx-fifo-resize;
dr_mode = "host";
};
};
diff --git a/target/linux/ipq806x/modules.mk b/target/linux/ipq806x/modules.mk
index 38dd195902..6f1ca2d2a4 100644
--- a/target/linux/ipq806x/modules.mk
+++ b/target/linux/ipq806x/modules.mk
@@ -29,20 +29,3 @@ define KernelPackage/usb-phy-qcom-dwc3/description
endef
$(eval $(call KernelPackage,usb-phy-qcom-dwc3))
-
-
-define KernelPackage/usb-dwc3-qcom
- TITLE:=DWC3 USB QCOM controller driver
- DEPENDS:=@TARGET_ipq806x +kmod-usb-dwc3 +kmod-usb-phy-qcom-dwc3
- KCONFIG:= CONFIG_USB_DWC3_QCOM
- FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-qcom.ko
- AUTOLOAD:=$(call AutoLoad,53,dwc3-qcom,1)
- $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb-dwc3-qcom/description
- This driver provides support for the integrated DesignWare
- USB3 IP Core within the QCOM SoCs.
-endef
-
-$(eval $(call KernelPackage,usb-dwc3-qcom))
diff --git a/target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch b/target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch
new file mode 100644
index 0000000000..b940827529
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-01-usb-dwc3-core-purge-dev_dbg-calls.patch
@@ -0,0 +1,46 @@
+From 1407bf13e3bf5f1168484c3e68b6ef9d8cf2bc72 Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <balbi@ti.com>
+Date: Mon, 16 Nov 2015 16:06:37 -0600
+Subject: usb: dwc3: core: purge dev_dbg() calls
+
+The last few dev_dbg() messages are converted to
+tracepoints and we can finally ignore dev_dbg()
+messages during debug sessions.
+
+Signed-off-by: Felipe Balbi <balbi@ti.com>
+---
+ drivers/usb/dwc3/core.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index 22b47973..de5e01f 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -272,7 +272,8 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
+
+ for (n = 0; n < dwc->num_event_buffers; n++) {
+ evt = dwc->ev_buffs[n];
+- dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
++ dwc3_trace(trace_dwc3_core,
++ "Event buf %p dma %08llx length %d\n",
+ evt->buf, (unsigned long long) evt->dma,
+ evt->length);
+
+@@ -608,12 +609,13 @@ static int dwc3_core_init(struct dwc3 *dwc)
+ reg |= DWC3_GCTL_GBLHIBERNATIONEN;
+ break;
+ default:
+- dev_dbg(dwc->dev, "No power optimization available\n");
++ dwc3_trace(trace_dwc3_core, "No power optimization available\n");
+ }
+
+ /* check if current dwc3 is on simulation board */
+ if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
+- dev_dbg(dwc->dev, "it is on FPGA board\n");
++ dwc3_trace(trace_dwc3_core,
++ "running on FPGA platform\n");
+ dwc->is_fpga = true;
+ }
+
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch b/target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch
new file mode 100644
index 0000000000..9575166f74
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch
@@ -0,0 +1,56 @@
+From 2c7f1bd9127a1a49ee25d9c2b2ce17b11c7fb05f Mon Sep 17 00:00:00 2001
+From: John Youn <John.Youn@synopsys.com>
+Date: Fri, 5 Feb 2016 17:08:59 -0800
+Subject: usb: dwc3: Update maximum_speed for SuperSpeedPlus
+
+If the maximum_speed is not set, set it to a known value, either
+SuperSpeed or SuperSpeedPlus based on the type of controller we are
+using. If we are on DWC_usb31 controller, check the PHY interface to see
+if it is capable of SuperSpeedPlus.
+
+Also this check is moved after dwc3_core_init() so that we can check
+dwc->revision.
+
+Signed-off-by: John Youn <johnyoun@synopsys.com>
+Signed-off-by: Felipe Balbi <balbi@kernel.org>
+---
+ drivers/usb/dwc3/core.c | 17 +++++++++++++----
+ 1 file changed, 13 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index de5e01f..001c755 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -962,10 +962,6 @@ static int dwc3_probe(struct platform_device *pdev)
+ fladj = pdata->fladj_value;
+ }
+
+- /* default to superspeed if no maximum_speed passed */
+- if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
+- dwc->maximum_speed = USB_SPEED_SUPER;
+-
+ dwc->lpm_nyet_threshold = lpm_nyet_threshold;
+ dwc->tx_de_emphasis = tx_de_emphasis;
+
+@@ -1016,6 +1012,19 @@ static int dwc3_probe(struct platform_device *pdev)
+ goto err1;
+ }
+
++ /* default to superspeed if no maximum_speed passed */
++ if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
++ dwc->maximum_speed = USB_SPEED_SUPER;
++
++ /*
++ * default to superspeed plus if we are capable.
++ */
++ if (dwc3_is_usb31(dwc) &&
++ (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
++ DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
++ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
++ }
++
+ /* Adjust Frame Length */
+ dwc3_frame_length_adjustment(dwc, fladj);
+
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch b/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch
new file mode 100644
index 0000000000..43821266a1
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch
@@ -0,0 +1,74 @@
+From 77966eb85e6d988a6daaf8ac14ac33026ceb3ab7 Mon Sep 17 00:00:00 2001
+From: John Youn <John.Youn@synopsys.com>
+Date: Fri, 19 Feb 2016 17:31:01 -0800
+Subject: usb: dwc3: Validate the maximum_speed parameter
+
+Check that dwc->maximum_speed is set to a valid value. Also add an error
+when we use it later if we encounter an invalid value.
+
+Signed-off-by: John Youn <johnyoun@synopsys.com>
+Signed-off-by: Felipe Balbi <balbi@kernel.org>
+---
+ drivers/usb/dwc3/core.c | 18 ++++++++++++++++--
+ drivers/usb/dwc3/gadget.c | 9 ++++++---
+ 2 files changed, 22 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index 001c755..17fd814 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -1012,8 +1012,20 @@ static int dwc3_probe(struct platform_device *pdev)
+ goto err1;
+ }
+
+- /* default to superspeed if no maximum_speed passed */
+- if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
++ /* Check the maximum_speed parameter */
++ switch (dwc->maximum_speed) {
++ case USB_SPEED_LOW:
++ case USB_SPEED_FULL:
++ case USB_SPEED_HIGH:
++ case USB_SPEED_SUPER:
++ case USB_SPEED_SUPER_PLUS:
++ break;
++ default:
++ dev_err(dev, "invalid maximum_speed parameter %d\n",
++ dwc->maximum_speed);
++ /* fall through */
++ case USB_SPEED_UNKNOWN:
++ /* default to superspeed */
+ dwc->maximum_speed = USB_SPEED_SUPER;
+
+ /*
+@@ -1023,6 +1035,8 @@ static int dwc3_probe(struct platform_device *pdev)
+ (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+ DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
++
++ break;
+ }
+
+ /* Adjust Frame Length */
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index 482e6a1..3ac170f 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -1670,10 +1670,13 @@ static int dwc3_gadget_start(struct usb_gadget *g,
+ case USB_SPEED_SUPER_PLUS:
+ reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+ break;
+- case USB_SPEED_SUPER: /* FALLTHROUGH */
+- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
+ default:
+- reg |= DWC3_DSTS_SUPERSPEED;
++ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
++ dwc->maximum_speed);
++ /* fall through */
++ case USB_SPEED_SUPER:
++ reg |= DWC3_DCFG_SUPERSPEED;
++ break;
+ }
+ }
+ dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
new file mode 100644
index 0000000000..47278d40c5
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch
@@ -0,0 +1,32 @@
+From c4137a9c841ec7fb300782d211f2d6907f4d6e20 Mon Sep 17 00:00:00 2001
+From: John Youn <John.Youn@synopsys.com>
+Date: Fri, 5 Feb 2016 17:08:18 -0800
+Subject: usb: dwc3: DWC_usb31 controller check
+
+Add a convenience function to check if the controller is DWC_usb31.
+
+Signed-off-by: John Youn <johnyoun@synopsys.com>
+Signed-off-by: Felipe Balbi <balbi@kernel.org>
+---
+ drivers/usb/dwc3/core.h | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
+index e4f8b90..c0520d67 100644
+--- a/drivers/usb/dwc3/core.h
++++ b/drivers/usb/dwc3/core.h
+@@ -1024,6 +1024,12 @@ struct dwc3_gadget_ep_cmd_params {
+ void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+
++/* check whether we are on the DWC_usb31 core */
++static inline bool dwc3_is_usb31(struct dwc3 *dwc)
++{
++ return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
++}
++
+ #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+ int dwc3_host_init(struct dwc3 *dwc);
+ void dwc3_host_exit(struct dwc3 *dwc);
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
new file mode 100644
index 0000000000..e4805db0b4
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
@@ -0,0 +1,46 @@
+From 1f38f88a24c86d46cf47782ffabd5457f231f8ca Mon Sep 17 00:00:00 2001
+From: John Youn <John.Youn@synopsys.com>
+Date: Fri, 5 Feb 2016 17:08:31 -0800
+Subject: usb: dwc3: Update register fields for SuperSpeedPlus
+
+Update various registers fields definitions for the DWC_usb31 controller
+for SuperSpeedPlus support.
+
+Signed-off-by: John Youn <johnyoun@synopsys.com>
+Signed-off-by: Felipe Balbi <balbi@kernel.org>
+---
+ drivers/usb/dwc3/core.h | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
+index c0520d67..6254b2f 100644
+--- a/drivers/usb/dwc3/core.h
++++ b/drivers/usb/dwc3/core.h
+@@ -223,7 +223,8 @@
+ /* Global HWPARAMS3 Register */
+ #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
+ #define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
+-#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA 1
++#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
++#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
+ #define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
+ #define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
+ #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
+@@ -249,6 +250,7 @@
+ #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
+
+ #define DWC3_DCFG_SPEED_MASK (7 << 0)
++#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
+ #define DWC3_DCFG_SUPERSPEED (4 << 0)
+ #define DWC3_DCFG_HIGHSPEED (0 << 0)
+ #define DWC3_DCFG_FULLSPEED2 (1 << 0)
+@@ -339,6 +341,7 @@
+
+ #define DWC3_DSTS_CONNECTSPD (7 << 0)
+
++#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
+ #define DWC3_DSTS_SUPERSPEED (4 << 0)
+ #define DWC3_DSTS_HIGHSPEED (0 << 0)
+ #define DWC3_DSTS_FULLSPEED2 (1 << 0)
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch b/target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch
new file mode 100644
index 0000000000..197dd057d2
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-06-usb-dwc3-core-improve-reset-sequence.patch
@@ -0,0 +1,101 @@
+From f59dcab176293b646e1358144c93c58c3cda2813 Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <felipe.balbi@linux.intel.com>
+Date: Fri, 11 Mar 2016 10:51:52 +0200
+Subject: usb: dwc3: core: improve reset sequence
+
+According to Synopsys Databook, we shouldn't be
+relying on GCTL.CORESOFTRESET bit as that's only for
+debugging purposes. Instead, let's use DCTL.CSFTRST
+if we're OTG or PERIPHERAL mode.
+
+Host side block will be reset by XHCI driver if
+necessary. Note that this reduces amount of time
+spent on dwc3_probe() by a long margin.
+
+We're still gonna wait for reset to finish for a
+long time (default to 1ms max), but tests show that
+the reset polling loop executed at most 19 times
+(modprobe dwc3 && modprobe -r dwc3 executed 1000
+times in a row).
+
+Suggested-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ drivers/usb/dwc3/core.c | 48 ++++++++++++++++++------------------------------
+ 1 file changed, 18 insertions(+), 30 deletions(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index 17fd814..fa20f5a9 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
+ static int dwc3_core_soft_reset(struct dwc3 *dwc)
+ {
+ u32 reg;
++ int retries = 1000;
+ int ret;
+
+- /* Before Resetting PHY, put Core in Reset */
+- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+- reg |= DWC3_GCTL_CORESOFTRESET;
+- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+-
+- /* Assert USB3 PHY reset */
+- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+- reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
+- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+-
+- /* Assert USB2 PHY reset */
+- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+- reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
+- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+-
+ usb_phy_init(dwc->usb2_phy);
+ usb_phy_init(dwc->usb3_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+@@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
+ phy_exit(dwc->usb2_generic_phy);
+ return ret;
+ }
+- mdelay(100);
+
+- /* Clear USB3 PHY reset */
+- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+- reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
+- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
++ /*
++ * We're resetting only the device side because, if we're in host mode,
++ * XHCI driver will reset the host block. If dwc3 was configured for
++ * host-only mode, then we can return early.
++ */
++ if (dwc->dr_mode == USB_DR_MODE_HOST)
++ return 0;
+
+- /* Clear USB2 PHY reset */
+- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+- reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
+- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
++ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
++ reg |= DWC3_DCTL_CSFTRST;
++ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+- mdelay(100);
++ do {
++ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
++ if (!(reg & DWC3_DCTL_CSFTRST))
++ return 0;
+
+- /* After PHYs are stable we can take Core out of reset state */
+- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+- reg &= ~DWC3_GCTL_CORESOFTRESET;
+- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
++ udelay(1);
++ } while (--retries);
+
+- return 0;
++ return -ETIMEDOUT;
+ }
+
+ /**
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
new file mode 100644
index 0000000000..9b6026d914
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
@@ -0,0 +1,258 @@
+From bc5081617faeb3b2f0c126dc37264b87af7da47f Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <felipe.balbi@linux.intel.com>
+Date: Thu, 4 Feb 2016 14:18:01 +0200
+Subject: usb: dwc3: drop FIFO resizing logic
+
+That FIFO resizing logic was added to support OMAP5
+ES1.0 which had a bogus default FIFO size. I can't
+remember the exact size of default FIFO, but it was
+less than one bulk superspeed packet (<1024) which
+would prevent USB3 from ever working on OMAP5 ES1.0.
+
+However, OMAP5 ES1.0 support has been dropped by
+commit aa2f4b16f830 ("ARM: OMAP5: id: Remove ES1.0
+support") which renders FIFO resizing unnecessary.
+
+Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ Documentation/devicetree/bindings/usb/dwc3.txt | 4 +-
+ .../devicetree/bindings/usb/qcom,dwc3.txt | 1 -
+ drivers/usb/dwc3/core.c | 4 -
+ drivers/usb/dwc3/core.h | 5 --
+ drivers/usb/dwc3/ep0.c | 9 ---
+ drivers/usb/dwc3/gadget.c | 86 ----------------------
+ drivers/usb/dwc3/platform_data.h | 1 -
+ 7 files changed, 2 insertions(+), 108 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
+index fb2ad0a..1569568 100644
+--- a/Documentation/devicetree/bindings/usb/dwc3.txt
++++ b/Documentation/devicetree/bindings/usb/dwc3.txt
+@@ -14,7 +14,6 @@ Optional properties:
+ the second element is expected to be a handle to the USB3/SS PHY
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
+- - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+ - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
+ - snps,disable_scramble_quirk: true when SW should disable data scrambling.
+ Only really useful for FPGA builds.
+@@ -47,6 +46,8 @@ Optional properties:
+ register for post-silicon frame length adjustment when the
+ fladj_30mhz_sdbnd signal is invalid or incorrect.
+
++ - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
++
+ This is usually a subnode to DWC3 glue to which it is connected.
+
+ dwc3@4a030000 {
+@@ -54,5 +55,4 @@ dwc3@4a030000 {
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>
+ usb-phy = <&usb2_phy>, <&usb3,phy>;
+- tx-fifo-resize;
+ };
+diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+index ca164e7..39acb08 100644
+--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
++++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+@@ -59,7 +59,6 @@ Example device nodes:
+ interrupts = <0 205 0x4>;
+ phys = <&hs_phy>, <&ss_phy>;
+ phy-names = "usb2-phy", "usb3-phy";
+- tx-fifo-resize;
+ dr_mode = "host";
+ };
+ };
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index fa20f5a9..67d183a 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -882,9 +882,6 @@ static int dwc3_probe(struct platform_device *pdev)
+ dwc->usb3_lpm_capable = device_property_read_bool(dev,
+ "snps,usb3_lpm_capable");
+
+- dwc->needs_fifo_resize = device_property_read_bool(dev,
+- "tx-fifo-resize");
+-
+ dwc->disable_scramble_quirk = device_property_read_bool(dev,
+ "snps,disable_scramble_quirk");
+ dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
+@@ -926,7 +923,6 @@ static int dwc3_probe(struct platform_device *pdev)
+ if (pdata->hird_threshold)
+ hird_threshold = pdata->hird_threshold;
+
+- dwc->needs_fifo_resize = pdata->tx_fifo_resize;
+ dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
+ dwc->dr_mode = pdata->dr_mode;
+
+diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
+index 6254b2f..7cbe9e9 100644
+--- a/drivers/usb/dwc3/core.h
++++ b/drivers/usb/dwc3/core.h
+@@ -709,9 +709,7 @@ struct dwc3_scratchpad_array {
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
+ * @is_fpga: true when we are using the FPGA board
+- * @needs_fifo_resize: not all users might want fifo resizing, flag it
+ * @pullups_connected: true when Run/Stop bit is set
+- * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
+ * @start_config_issued: true when StartConfig command has been issued
+ * @three_stage_setup: set if we perform a three phase setup
+@@ -855,9 +853,7 @@ struct dwc3 {
+ unsigned has_lpm_erratum:1;
+ unsigned is_utmi_l1_suspend:1;
+ unsigned is_fpga:1;
+- unsigned needs_fifo_resize:1;
+ unsigned pullups_connected:1;
+- unsigned resize_fifos:1;
+ unsigned setup_packet_pending:1;
+ unsigned three_stage_setup:1;
+ unsigned usb3_lpm_capable:1;
+@@ -1025,7 +1021,6 @@ struct dwc3_gadget_ep_cmd_params {
+
+ /* prototypes */
+ void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+-int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+
+ /* check whether we are on the DWC_usb31 core */
+ static inline bool dwc3_is_usb31(struct dwc3 *dwc)
+diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
+index eca2e6d..4454de0 100644
+--- a/drivers/usb/dwc3/ep0.c
++++ b/drivers/usb/dwc3/ep0.c
+@@ -586,9 +586,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+-
+- dwc->resize_fifos = true;
+- dwc3_trace(trace_dwc3_ep0, "resize FIFOs flag SET");
+ }
+ break;
+
+@@ -1027,12 +1024,6 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
+
+ static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
+ {
+- if (dwc->resize_fifos) {
+- dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs");
+- dwc3_gadget_resize_tx_fifos(dwc);
+- dwc->resize_fifos = 0;
+- }
+-
+ WARN_ON(dwc3_ep0_start_control_status(dep));
+ }
+
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index d54a028..3a5c271 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -145,92 +145,6 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
+ return -ETIMEDOUT;
+ }
+
+-/**
+- * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
+- * @dwc: pointer to our context structure
+- *
+- * This function will a best effort FIFO allocation in order
+- * to improve FIFO usage and throughput, while still allowing
+- * us to enable as many endpoints as possible.
+- *
+- * Keep in mind that this operation will be highly dependent
+- * on the configured size for RAM1 - which contains TxFifo -,
+- * the amount of endpoints enabled on coreConsultant tool, and
+- * the width of the Master Bus.
+- *
+- * In the ideal world, we would always be able to satisfy the
+- * following equation:
+- *
+- * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
+- * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
+- *
+- * Unfortunately, due to many variables that's not always the case.
+- */
+-int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
+-{
+- int last_fifo_depth = 0;
+- int ram1_depth;
+- int fifo_size;
+- int mdwidth;
+- int num;
+-
+- if (!dwc->needs_fifo_resize)
+- return 0;
+-
+- ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+- mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
+-
+- /* MDWIDTH is represented in bits, we need it in bytes */
+- mdwidth >>= 3;
+-
+- /*
+- * FIXME For now we will only allocate 1 wMaxPacketSize space
+- * for each enabled endpoint, later patches will come to
+- * improve this algorithm so that we better use the internal
+- * FIFO space
+- */
+- for (num = 0; num < dwc->num_in_eps; num++) {
+- /* bit0 indicates direction; 1 means IN ep */
+- struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
+- int mult = 1;
+- int tmp;
+-
+- if (!(dep->flags & DWC3_EP_ENABLED))
+- continue;
+-
+- if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
+- || usb_endpoint_xfer_isoc(dep->endpoint.desc))
+- mult = 3;
+-
+- /*
+- * REVISIT: the following assumes we will always have enough
+- * space available on the FIFO RAM for all possible use cases.
+- * Make sure that's true somehow and change FIFO allocation
+- * accordingly.
+- *
+- * If we have Bulk or Isochronous endpoints, we want
+- * them to be able to be very, very fast. So we're giving
+- * those endpoints a fifo_size which is enough for 3 full
+- * packets
+- */
+- tmp = mult * (dep->endpoint.maxpacket + mdwidth);
+- tmp += mdwidth;
+-
+- fifo_size = DIV_ROUND_UP(tmp, mdwidth);
+-
+- fifo_size |= (last_fifo_depth << 16);
+-
+- dwc3_trace(trace_dwc3_gadget, "%s: Fifo Addr %04x Size %d",
+- dep->name, last_fifo_depth, fifo_size & 0xffff);
+-
+- dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
+-
+- last_fifo_depth += (fifo_size & 0xffff);
+- }
+-
+- return 0;
+-}
+-
+ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+ int status)
+ {
+diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
+index 2bb4d3a..aaa6f00 100644
+--- a/drivers/usb/dwc3/platform_data.h
++++ b/drivers/usb/dwc3/platform_data.h
+@@ -23,7 +23,6 @@
+ struct dwc3_platform_data {
+ enum usb_device_speed maximum_speed;
+ enum usb_dr_mode dr_mode;
+- bool tx_fifo_resize;
+ bool usb3_lpm_capable;
+
+ unsigned is_utmi_l1_suspend:1;
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
new file mode 100644
index 0000000000..8bc0b9817f
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch
@@ -0,0 +1,273 @@
+From 660e9bde74d6915227d7ee3485b11e5f52637b26 Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <felipe.balbi@linux.intel.com>
+Date: Wed, 30 Mar 2016 09:26:24 +0300
+Subject: usb: dwc3: remove num_event_buffers
+
+We never, ever route any of the other event buffers
+so we might as well drop support for them.
+
+Until someone has a real, proper benefit for
+multiple event buffers, we will rely on a single
+one. This also helps reduce memory footprint of
+dwc3.ko which won't allocate memory for the extra
+event buffers.
+
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ drivers/usb/dwc3/core.c | 81 +++++++++++++++++++----------------------------
+ drivers/usb/dwc3/core.h | 2 --
+ drivers/usb/dwc3/gadget.c | 38 +++++++---------------
+ 3 files changed, 44 insertions(+), 77 deletions(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index 67d183a..9e5c57c7 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -203,13 +203,10 @@ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
+ static void dwc3_free_event_buffers(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+- int i;
+
+- for (i = 0; i < dwc->num_event_buffers; i++) {
+- evt = dwc->ev_buffs[i];
+- if (evt)
+- dwc3_free_one_event_buffer(dwc, evt);
+- }
++ evt = dwc->ev_buffs[0];
++ if (evt)
++ dwc3_free_one_event_buffer(dwc, evt);
+ }
+
+ /**
+@@ -222,27 +219,19 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
+ */
+ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
+ {
+- int num;
+- int i;
+-
+- num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
+- dwc->num_event_buffers = num;
++ struct dwc3_event_buffer *evt;
+
+- dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
++ dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs),
+ GFP_KERNEL);
+ if (!dwc->ev_buffs)
+ return -ENOMEM;
+
+- for (i = 0; i < num; i++) {
+- struct dwc3_event_buffer *evt;
+-
+- evt = dwc3_alloc_one_event_buffer(dwc, length);
+- if (IS_ERR(evt)) {
+- dev_err(dwc->dev, "can't allocate event buffer\n");
+- return PTR_ERR(evt);
+- }
+- dwc->ev_buffs[i] = evt;
++ evt = dwc3_alloc_one_event_buffer(dwc, length);
++ if (IS_ERR(evt)) {
++ dev_err(dwc->dev, "can't allocate event buffer\n");
++ return PTR_ERR(evt);
+ }
++ dwc->ev_buffs[0] = evt;
+
+ return 0;
+ }
+@@ -256,25 +245,22 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
+ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+- int n;
+
+- for (n = 0; n < dwc->num_event_buffers; n++) {
+- evt = dwc->ev_buffs[n];
+- dwc3_trace(trace_dwc3_core,
+- "Event buf %p dma %08llx length %d\n",
+- evt->buf, (unsigned long long) evt->dma,
+- evt->length);
+-
+- evt->lpos = 0;
+-
+- dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
+- lower_32_bits(evt->dma));
+- dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
+- upper_32_bits(evt->dma));
+- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
+- DWC3_GEVNTSIZ_SIZE(evt->length));
+- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+- }
++ evt = dwc->ev_buffs[0];
++ dwc3_trace(trace_dwc3_core,
++ "Event buf %p dma %08llx length %d\n",
++ evt->buf, (unsigned long long) evt->dma,
++ evt->length);
++
++ evt->lpos = 0;
++
++ dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
++ lower_32_bits(evt->dma));
++ dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
++ upper_32_bits(evt->dma));
++ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
++ DWC3_GEVNTSIZ_SIZE(evt->length));
++ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+
+ return 0;
+ }
+@@ -282,19 +268,16 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
+ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+- int n;
+
+- for (n = 0; n < dwc->num_event_buffers; n++) {
+- evt = dwc->ev_buffs[n];
++ evt = dwc->ev_buffs[0];
+
+- evt->lpos = 0;
++ evt->lpos = 0;
+
+- dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
+- dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
+- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK
+- | DWC3_GEVNTSIZ_SIZE(0));
+- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+- }
++ dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), 0);
++ dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
++ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
++ | DWC3_GEVNTSIZ_SIZE(0));
++ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+ }
+
+ static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc)
+diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
+index 4ea4b51..be03999 100644
+--- a/drivers/usb/dwc3/core.h
++++ b/drivers/usb/dwc3/core.h
+@@ -667,7 +667,6 @@ struct dwc3_scratchpad_array {
+ * @regs: base address for our registers
+ * @regs_size: address space size
+ * @nr_scratch: number of scratch buffers
+- * @num_event_buffers: calculated number of event buffers
+ * @u1u2: only used on revisions <1.83a for workaround
+ * @maximum_speed: maximum speed requested (mainly for testing purposes)
+ * @revision: revision register contents
+@@ -778,7 +777,6 @@ struct dwc3 {
+ u32 gctl;
+
+ u32 nr_scratch;
+- u32 num_event_buffers;
+ u32 u1u2;
+ u32 maximum_speed;
+
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index e6bd3a9..5e6a495 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -2602,14 +2602,14 @@ static void dwc3_process_event_entry(struct dwc3 *dwc,
+ }
+ }
+
+-static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
++static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+ irqreturn_t ret = IRQ_NONE;
+ int left;
+ u32 reg;
+
+- evt = dwc->ev_buffs[buf];
++ evt = dwc->ev_buffs[0];
+ left = evt->count;
+
+ if (!(evt->flags & DWC3_EVENT_PENDING))
+@@ -2634,7 +2634,7 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
+ evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
+ left -= 4;
+
+- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
++ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 4);
+ }
+
+ evt->count = 0;
+@@ -2642,9 +2642,9 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
+ ret = IRQ_HANDLED;
+
+ /* Unmask interrupt */
+- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
++ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
+ reg &= ~DWC3_GEVNTSIZ_INTMASK;
+- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
++ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
+
+ return ret;
+ }
+@@ -2654,27 +2654,23 @@ static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc)
+ struct dwc3 *dwc = _dwc;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+- int i;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+-
+- for (i = 0; i < dwc->num_event_buffers; i++)
+- ret |= dwc3_process_event_buf(dwc, i);
+-
++ ret = dwc3_process_event_buf(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
+ }
+
+-static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
++static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+ u32 count;
+ u32 reg;
+
+- evt = dwc->ev_buffs[buf];
++ evt = dwc->ev_buffs[0];
+
+- count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
++ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+ count &= DWC3_GEVNTCOUNT_MASK;
+ if (!count)
+ return IRQ_NONE;
+@@ -2683,9 +2679,9 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
+ evt->flags |= DWC3_EVENT_PENDING;
+
+ /* Mask interrupt */
+- reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(buf));
++ reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
+ reg |= DWC3_GEVNTSIZ_INTMASK;
+- dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(buf), reg);
++ dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
+
+ return IRQ_WAKE_THREAD;
+ }
+@@ -2693,18 +2689,8 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc, u32 buf)
+ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
+ {
+ struct dwc3 *dwc = _dwc;
+- int i;
+- irqreturn_t ret = IRQ_NONE;
+-
+- for (i = 0; i < dwc->num_event_buffers; i++) {
+- irqreturn_t status;
+
+- status = dwc3_check_event_buf(dwc, i);
+- if (status == IRQ_WAKE_THREAD)
+- ret = status;
+- }
+-
+- return ret;
++ return dwc3_check_event_buf(dwc);
+ }
+
+ /**
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
new file mode 100644
index 0000000000..64d796cf38
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch
@@ -0,0 +1,104 @@
+From 696c8b1282205caa5206264449f80ef756f14ef7 Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <felipe.balbi@linux.intel.com>
+Date: Wed, 30 Mar 2016 09:37:03 +0300
+Subject: usb: dwc3: drop ev_buffs array
+
+we will be using a single event buffer and that
+renders ev_buffs array unnecessary. Let's remove it
+in favor of a single pointer to a single event
+buffer.
+
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ drivers/usb/dwc3/core.c | 13 ++++---------
+ drivers/usb/dwc3/core.h | 2 +-
+ drivers/usb/dwc3/gadget.c | 4 ++--
+ 3 files changed, 7 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index 9e5c57c7..05b7ec3 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -204,7 +204,7 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+
+- evt = dwc->ev_buffs[0];
++ evt = dwc->ev_buf;
+ if (evt)
+ dwc3_free_one_event_buffer(dwc, evt);
+ }
+@@ -221,17 +221,12 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
+ {
+ struct dwc3_event_buffer *evt;
+
+- dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs),
+- GFP_KERNEL);
+- if (!dwc->ev_buffs)
+- return -ENOMEM;
+-
+ evt = dwc3_alloc_one_event_buffer(dwc, length);
+ if (IS_ERR(evt)) {
+ dev_err(dwc->dev, "can't allocate event buffer\n");
+ return PTR_ERR(evt);
+ }
+- dwc->ev_buffs[0] = evt;
++ dwc->ev_buf = evt;
+
+ return 0;
+ }
+@@ -246,7 +241,7 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+
+- evt = dwc->ev_buffs[0];
++ evt = dwc->ev_buf;
+ dwc3_trace(trace_dwc3_core,
+ "Event buf %p dma %08llx length %d\n",
+ evt->buf, (unsigned long long) evt->dma,
+@@ -269,7 +264,7 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
+ {
+ struct dwc3_event_buffer *evt;
+
+- evt = dwc->ev_buffs[0];
++ evt = dwc->ev_buf;
+
+ evt->lpos = 0;
+
+diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
+index be03999..df72234a 100644
+--- a/drivers/usb/dwc3/core.h
++++ b/drivers/usb/dwc3/core.h
+@@ -753,7 +753,7 @@ struct dwc3 {
+ struct platform_device *xhci;
+ struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
+
+- struct dwc3_event_buffer **ev_buffs;
++ struct dwc3_event_buffer *ev_buf;
+ struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
+
+ struct usb_gadget gadget;
+diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
+index 5e6a495..96dfde0 100644
+--- a/drivers/usb/dwc3/gadget.c
++++ b/drivers/usb/dwc3/gadget.c
+@@ -2609,7 +2609,7 @@ static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc)
+ int left;
+ u32 reg;
+
+- evt = dwc->ev_buffs[0];
++ evt = dwc->ev_buf;
+ left = evt->count;
+
+ if (!(evt->flags & DWC3_EVENT_PENDING))
+@@ -2668,7 +2668,7 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3 *dwc)
+ u32 count;
+ u32 reg;
+
+- evt = dwc->ev_buffs[0];
++ evt = dwc->ev_buf;
+
+ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+ count &= DWC3_GEVNTCOUNT_MASK;
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch b/target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch
new file mode 100644
index 0000000000..87f1562cc6
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch
@@ -0,0 +1,71 @@
+From 5c4ad318de3b8e8680d654c82a254c4b65243739 Mon Sep 17 00:00:00 2001
+From: Felipe Balbi <balbi@kernel.org>
+Date: Mon, 11 Apr 2016 17:12:34 +0300
+Subject: usb: dwc3: core: fix PHY handling during suspend
+
+we need to power off the PHY during suspend and
+power it back on during resume.
+
+Signed-off-by: Felipe Balbi <balbi@kernel.org>
+[nsekhar@ti.com: fix call to usb_phy_set_suspend() in dwc3_suspend()]
+Signed-off-by: Sekhar Nori <nsekhar@ti.com>
+Signed-off-by: Roger Quadros <rogerq@ti.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ drivers/usb/dwc3/core.c | 23 ++++++++++++++++++++++-
+ 1 file changed, 22 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
+index fa20f5a9..34277ce 100644
+--- a/drivers/usb/dwc3/core.c
++++ b/drivers/usb/dwc3/core.c
+@@ -1150,6 +1150,11 @@ static int dwc3_suspend(struct device *dev)
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
+
++ usb_phy_set_suspend(dwc->usb2_phy, 1);
++ usb_phy_set_suspend(dwc->usb3_phy, 1);
++ WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
++ WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
++
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+@@ -1163,11 +1168,21 @@ static int dwc3_resume(struct device *dev)
+
+ pinctrl_pm_select_default_state(dev);
+
++ usb_phy_set_suspend(dwc->usb2_phy, 0);
++ usb_phy_set_suspend(dwc->usb3_phy, 0);
++ ret = phy_power_on(dwc->usb2_generic_phy);
++ if (ret < 0)
++ return ret;
++
++ ret = phy_power_on(dwc->usb3_generic_phy);
++ if (ret < 0)
++ goto err_usb2phy_power;
++
+ usb_phy_init(dwc->usb3_phy);
+ usb_phy_init(dwc->usb2_phy);
+ ret = phy_init(dwc->usb2_generic_phy);
+ if (ret < 0)
+- return ret;
++ goto err_usb3phy_power;
+
+ ret = phy_init(dwc->usb3_generic_phy);
+ if (ret < 0)
+@@ -1200,6 +1215,12 @@ static int dwc3_resume(struct device *dev)
+ err_usb2phy_init:
+ phy_exit(dwc->usb2_generic_phy);
+
++err_usb3phy_power:
++ phy_power_off(dwc->usb3_generic_phy);
++
++err_usb2phy_power:
++ phy_power_off(dwc->usb2_generic_phy);
++
+ return ret;
+ }
+
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/097-usb-dwc3-add-generic-OF-glue-layer.patch b/target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch
index 214bedc95a..214bedc95a 100644
--- a/target/linux/ipq806x/patches-4.4/097-usb-dwc3-add-generic-OF-glue-layer.patch
+++ b/target/linux/ipq806x/patches-4.4/097-1-usb-dwc3-add-generic-OF-glue-layer.patch
diff --git a/target/linux/ipq806x/patches-4.4/098-usb-dwc3-of-simple-fix-build-warning-on-PM.patch b/target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch
index b982c82367..b982c82367 100644
--- a/target/linux/ipq806x/patches-4.4/098-usb-dwc3-of-simple-fix-build-warning-on-PM.patch
+++ b/target/linux/ipq806x/patches-4.4/097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch
diff --git a/target/linux/ipq806x/patches-4.4/099-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch b/target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch
index 32f9e34177..32f9e34177 100644
--- a/target/linux/ipq806x/patches-4.4/099-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch
+++ b/target/linux/ipq806x/patches-4.4/097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch
diff --git a/target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch b/target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch
new file mode 100644
index 0000000000..2aeadc30ed
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.4/097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch
@@ -0,0 +1,31 @@
+From 4c4f106c032ff32b89c98a4d819e68e6e643c14e Mon Sep 17 00:00:00 2001
+From: Wei Yongjun <weiyj.lk@gmail.com>
+Date: Tue, 26 Jul 2016 14:47:00 +0000
+Subject: usb: dwc3: fix missing platform_set_drvdata() in
+ dwc3_of_simple_probe()
+
+Add missing platform_set_drvdata() in dwc3_of_simple_probe(), otherwise
+calling platform_get_drvdata() in remove returns NULL.
+
+This is detected by Coccinelle semantic patch.
+
+Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ drivers/usb/dwc3/dwc3-of-simple.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
+index 9743353..e56d59b 100644
+--- a/drivers/usb/dwc3/dwc3-of-simple.c
++++ b/drivers/usb/dwc3/dwc3-of-simple.c
+@@ -61,6 +61,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
+ if (!simple->clks)
+ return -ENOMEM;
+
++ platform_set_drvdata(pdev, simple);
+ simple->dev = dev;
+
+ for (i = 0; i < simple->num_clocks; i++) {
+--
+cgit v0.12
diff --git a/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch b/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
index 6e6f10d549..d1f19c367e 100644
--- a/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
+++ b/target/linux/ipq806x/patches-4.4/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
@@ -32,7 +32,7 @@
};
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -333,6 +333,90 @@
+@@ -333,6 +333,88 @@
compatible = "syscon";
reg = <0x01200600 0x100>;
};
@@ -94,7 +94,6 @@
+ interrupts = <0 110 0x4>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
-+ tx-fifo-resize;
+ dr_mode = "host";
+ };
+ };
@@ -116,7 +115,6 @@
+ interrupts = <0 205 0x4>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
-+ tx-fifo-resize;
+ dr_mode = "host";
+ };
+ };