diff options
Diffstat (limited to 'target/linux/ipq806x')
9 files changed, 533 insertions, 284 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 6570b783a4..21ad8be562 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -16,7 +16,7 @@ c2600) ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1" ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20" ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e" - ucidef_set_led_default "general" "general" "${board}:white:ledgnr" "1" + ucidef_set_led_default "general" "general" "${board}:white:general" "1" ;; d7800 |\ r7500 |\ diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts index 9162200fd9..f22838f7b4 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts @@ -1,4 +1,5 @@ #include "qcom-ipq8064-v1.0.dtsi" + #include <dt-bindings/input/input.h> / { @@ -25,9 +26,9 @@ mdio-gpio0 = &mdio0; led-boot = &power; - led-failsafe = &ledgnr; + led-failsafe = &general; led-running = &power; - led-upgrade = &ledgnr; + led-upgrade = &general; }; chosen { @@ -36,10 +37,32 @@ soc { pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio16", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", + "gpio53", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; spi_pins: spi_pins { @@ -56,6 +79,7 @@ cs { pins = "gpio20"; + function = "gpio"; drive-strength = <10>; bias-pull-up; }; @@ -66,31 +90,6 @@ }; }; - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - - pullups { - pins = "gpio39"; - bias-pull-up; - }; - - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - mdio0_pins: mdio0_pins { mux { pins = "gpio0", "gpio1"; @@ -109,6 +108,26 @@ bias-disable; }; }; + + usb0_pwr_en_pin: usb0_pwr_en_pin { + mux { + pins = "gpio25"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + output-high; + }; + }; + + usb1_pwr_en_pin: usb1_pwr_en_pin { + mux { + pins = "gpio23"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + output-high; + }; + }; }; gsbi@16300000 { @@ -314,10 +333,16 @@ usb30@0 { status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pin>; + pinctrl-names = "default"; }; usb30@1 { status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pin>; + pinctrl-names = "default"; }; pcie0: pci@1b500000 { @@ -387,10 +412,17 @@ full-duplex; }; }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; }; gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; wifi { label = "wifi"; @@ -410,15 +442,17 @@ linux,code = <KEY_WPS_BUTTON>; }; - ledgeneral { - label = "ledgeneral"; + ledswitch { + label = "ledswitch"; gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_DOLLAR>; + linux,code = <KEY_LIGHTS_TOGGLE>; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; lan { label = "c2600:white:lan"; @@ -441,7 +475,7 @@ }; wan_red { - label = "c2600:red:wan"; + label = "c2600:orange:wan"; gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; }; @@ -453,29 +487,14 @@ power: status { label = "c2600:white:status"; gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; - ledgnr: ledgnr { - label = "c2600:white:ledgnr"; + general: general { + label = "c2600:white:general"; gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; }; }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb1_power { - gpio-export,name = "usb1_power"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - usb2_power { - gpio-export,name = "usb2_power"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - }; }; &adm_dma { diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index 4dd7a32c44..4af56bae49 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -24,6 +24,11 @@ aliases { serial0 = &uart4; mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; }; chosen { @@ -33,26 +38,39 @@ soc { pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; - pcie0_pins: pcie0_pinmux { + i2c4_pins: i2c4_pinmux { mux { - pins = "gpio3"; - function = "pcie1_rst"; + pins = "gpio12", "gpio13"; + function = "gsbi4"; drive-strength = <12>; bias-disable; }; }; - pcie1_pins: pcie1_pinmux { + led_pins: led_pins { mux { - pins = "gpio48"; - function = "pcie2_rst"; - drive-strength = <12>; + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64", "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; bias-disable; }; }; @@ -80,15 +98,6 @@ }; }; - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - rgmii2_pins: rgmii2_pins { mux { pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", @@ -98,6 +107,26 @@ bias-disable; }; }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; }; gsbi@16300000 { @@ -140,22 +169,28 @@ usb30@0 { status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; }; usb30@1 { status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; }; pcie0: pci@1b500000 { status = "ok"; - reset-gpio = <&qcom_pinmux 3 0>; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie0_pins>; pinctrl-names = "default"; }; pcie1: pci@1b700000 { status = "ok"; - reset-gpio = <&qcom_pinmux 48 0>; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie1_pins>; pinctrl-names = "default"; }; @@ -228,14 +263,13 @@ label = "firmware"; reg = <0x1480000 0x2000000>; }; - }; mdio0: mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; @@ -283,82 +317,91 @@ full-duplex; }; }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; }; gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; wifi { label = "wifi"; - gpios = <&qcom_pinmux 6 1>; - linux,code = <KEY_WLAN>; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; }; reset { label = "reset"; - gpios = <&qcom_pinmux 54 1>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; - gpios = <&qcom_pinmux 65 1>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; usb1 { label = "d7800:amber:usb1"; - gpios = <&qcom_pinmux 7 0>; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; }; usb3 { label = "d7800:amber:usb3"; - gpios = <&qcom_pinmux 8 0>; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; }; status { label = "d7800:amber:status"; - gpios = <&qcom_pinmux 9 0>; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; }; internet { label = "d7800:white:internet"; - gpios = <&qcom_pinmux 22 0>; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; }; wan { label = "d7800:white:wan"; - gpios = <&qcom_pinmux 23 0>; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; }; wps { label = "d7800:white:wps"; - gpios = <&qcom_pinmux 24 0>; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; }; esata { label = "d7800:white:esata"; - gpios = <&qcom_pinmux 26 0>; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; }; - power { + power: power { label = "d7800:white:power"; - gpios = <&qcom_pinmux 53 0>; - default-state = "on"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; rfkill { label = "d7800:white:rfkill"; - gpios = <&qcom_pinmux 64 0>; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; }; wifi5g { label = "d7800:white:wifi5g"; - gpios = <&qcom_pinmux 67 0>; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts index 96e4acf1a8..b5840e8717 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -39,20 +39,42 @@ soc { pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; }; - spi_pins: spi_pins { + led_pins: led_pins { mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; + pins = "gpio6", "gpio53", "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; }; }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + nand_pins: nand_pins { mux { pins = "gpio34", "gpio35", "gpio36", @@ -76,15 +98,6 @@ }; }; - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - rgmii2_pins: rgmii2_pins { mux { pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", @@ -94,9 +107,6 @@ bias-disable; }; }; - - - }; gsbi@16300000 { @@ -207,7 +217,7 @@ reg = <0x0660000 0x0120000>; read-only; }; - + TZ@780000 { label = "TZ"; reg = <0x0780000 0x0280000>; @@ -231,54 +241,53 @@ reg = <0x0dc0000 0x0100000>; read-only; }; - + u_env@ec0000 { label = "u_env"; reg = <0x0ec0000 0x0040000>; }; - + s_env@f00000 { label = "s_env"; reg = <0x0f00000 0x0040000>; }; - + devinfo@f40000 { label = "devinfo"; reg = <0x0f40000 0x0040000>; }; - + linux@f80000 { label = "kernel1"; reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ }; - + rootfs@1280000 { label = "rootfs1"; reg = <0x1280000 0x2500000>; }; - + linux2@3780000 { label = "kernel2"; reg = <0x3780000 0x2800000>; }; - + rootfs2@3a80000 { label = "rootfs2"; reg = <0x3a80000 0x2500000>; }; - + syscfg@5f80000 { label = "syscfg"; reg = <0x5f80000 0x2080000>; }; - }; mdio0: mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; @@ -332,17 +341,23 @@ }; }; + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + adm_dma: dma@18300000 { status = "ok"; }; - }; gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; - rfkill { - label = "rfkill"; /* WIFI on-off*/ + wifi { + label = "wifi"; gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; linux,code = <KEY_RFKILL>; }; @@ -358,29 +373,27 @@ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; - }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; wps { label = "ea8500:green:wps"; - gpios = <&qcom_pinmux 53 0>; - default-state = "off"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; }; power: power { label = "ea8500:white:power"; - gpios = <&qcom_pinmux 6 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; wifi { label = "ea8500:green:wifi"; - gpios = <&qcom_pinmux 54 0>; - default-state = "off"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts index 2ecd493205..7fcbb0c878 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts @@ -24,6 +24,11 @@ aliases { serial0 = &uart4; mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; }; chosen { @@ -33,10 +38,41 @@ soc { pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64", "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; nand_pins: nand_pins { @@ -62,15 +98,6 @@ }; }; - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - rgmii2_pins: rgmii2_pins { mux { pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", @@ -205,7 +232,7 @@ compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; @@ -257,82 +284,91 @@ full-duplex; }; }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; }; gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; wifi { label = "wifi"; - gpios = <&qcom_pinmux 6 1>; - linux,code = <KEY_WLAN>; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; }; reset { label = "reset"; - gpios = <&qcom_pinmux 54 1>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; - gpios = <&qcom_pinmux 65 1>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; usb1 { label = "r7500:amber:usb1"; - gpios = <&qcom_pinmux 7 0>; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; }; usb3 { label = "r7500:amber:usb3"; - gpios = <&qcom_pinmux 8 0>; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; }; status { label = "r7500:amber:status"; - gpios = <&qcom_pinmux 9 0>; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; }; internet { label = "r7500:white:internet"; - gpios = <&qcom_pinmux 22 0>; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; }; wan { label = "r7500:white:wan"; - gpios = <&qcom_pinmux 23 0>; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; }; wps { label = "r7500:white:wps"; - gpios = <&qcom_pinmux 24 0>; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; }; esata { label = "r7500:white:esata"; - gpios = <&qcom_pinmux 26 0>; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; }; - power { + power: power { label = "r7500:white:power"; - gpios = <&qcom_pinmux 53 0>; - default-state = "on"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; rfkill { label = "r7500:white:rfkill"; - gpios = <&qcom_pinmux 64 0>; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; }; wifi5g { label = "r7500:white:wifi5g"; - gpios = <&qcom_pinmux 67 0>; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts index 869712d41c..67af68ee98 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts @@ -29,6 +29,11 @@ aliases { serial0 = &uart4; mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; }; chosen { @@ -38,10 +43,41 @@ soc { pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; }; nand_pins: nand_pins { @@ -67,15 +103,6 @@ }; }; - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - rgmii2_pins: rgmii2_pins { mux { pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", @@ -85,6 +112,26 @@ bias-disable; }; }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; }; gsbi@16300000 { @@ -127,10 +174,16 @@ usb30@0 { status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; }; usb30@1 { status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; }; pcie0: pci@1b500000 { @@ -222,7 +275,7 @@ compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; @@ -274,79 +327,87 @@ full-duplex; }; }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; }; gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; wifi { label = "wifi"; - gpios = <&qcom_pinmux 6 1>; - linux,code = <KEY_WLAN>; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; }; reset { label = "reset"; - gpios = <&qcom_pinmux 54 1>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; }; wps { label = "wps"; - gpios = <&qcom_pinmux 65 1>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; }; }; gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; usb1 { label = "r7500v2:amber:usb1"; - gpios = <&qcom_pinmux 7 0>; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; }; usb3 { label = "r7500v2:amber:usb3"; - gpios = <&qcom_pinmux 8 0>; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; }; status { label = "r7500v2:amber:status"; - gpios = <&qcom_pinmux 9 0>; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; }; internet { label = "r7500v2:white:internet"; - gpios = <&qcom_pinmux 22 0>; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; }; wan { label = "r7500v2:white:wan"; - gpios = <&qcom_pinmux 23 0>; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; }; wps { label = "r7500v2:white:wps"; - gpios = <&qcom_pinmux 24 0>; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; }; esata { label = "r7500v2:white:esata"; - gpios = <&qcom_pinmux 26 0>; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; }; - power { + power: power { label = "r7500v2:white:power"; - gpios = <&qcom_pinmux 53 0>; - default-state = "on"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; rfkill { label = "r7500v2:white:rfkill"; - gpios = <&qcom_pinmux 64 0>; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; }; - }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts index e03adc1483..ec0aa0c0ee 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts @@ -38,11 +38,13 @@ soc { pinmux@800000 { led_pins: led_pins { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", - "gpio26", "gpio53", "gpio56", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", + "gpio26", "gpio53", "gpio56", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; i2c4_pins: i2c4_pinmux { @@ -55,10 +57,12 @@ }; button_pins: button_pins { - pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; + mux { + pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; spi_pins: spi_pins { @@ -103,7 +107,6 @@ bias-disable; }; }; - }; gsbi@16300000 { @@ -227,7 +230,6 @@ reg = <0xfc0000 0x40000>; read-only; }; - }; }; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts index cc56213fdb..d23d57aa47 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -25,6 +25,11 @@ serial0 = &uart4; mdio-gpio0 = &mdio0; sdcc1 = &sdcc1; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; }; chosen { @@ -34,8 +39,14 @@ soc { pinmux@800000 { - pinctrl-0 = <&mdio0_pins &rgmii2_pins>; - pinctrl-names = "default"; + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; i2c4_pins: i2c4_pinmux { mux { @@ -46,6 +57,22 @@ }; }; + led_pins: led_pins { + off { + pins = "gpio26", "gpio33", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + on { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + mdio0_pins: mdio0_pins { mux { pins = "gpio0", "gpio1"; @@ -88,6 +115,42 @@ drive-strength = <12>; }; }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + pwr { + pins = "gpio14"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + + ovc { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-up; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + pwr { + pins = "gpio17"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + + ovc { + pins = "gpio16"; + function = "gpio"; + drive-strength = <12>; + bias-pull-up; + output-high; + }; + }; }; gsbi@16300000 { @@ -146,10 +209,16 @@ usb30@0 { status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; }; usb30@1 { status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; }; pcie0: pci@1b500000 { @@ -170,7 +239,9 @@ compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_LOW &qcom_pinmux 0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { device_type = "ethernet-phy"; @@ -222,6 +293,9 @@ qcom,irq = <255>; mdiobus = <&mdio0>; + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + fixed-link { speed = <1000>; full-duplex; @@ -253,18 +327,18 @@ amba { sdcc1: sdcc@12400000 { - status = "okay"; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; + status = "okay"; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; }; }; - - - }; gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + wifi { label = "wifi"; gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; @@ -286,15 +360,17 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + internet { label = "nbg6817:white:internet"; gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; }; - power { + power: power { label = "nbg6817:white:power"; gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; }; wifi { @@ -307,33 +383,6 @@ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; }; }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb0_status { - gpio-export,name = "usb0"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - - usb1_status { - gpio-export,name = "usb1"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - usb1_power { - gpio-export,name = "usb1_power"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - usb2_power { - gpio-export,name = "usb2_power"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - }; - }; }; &adm_dma { diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts index 8566995ef5..42d6e2b7a0 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -42,8 +42,14 @@ soc { pinmux@800000 { - pinctrl-0 = <&mdio0_pins &rgmii2_pins>; - pinctrl-names = "default"; + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; i2c4_pins: i2c4_pinmux { mux { @@ -54,6 +60,14 @@ }; }; + led_pins: led_pins { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64", "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + nand_pins: nand_pins { mux { pins = "gpio34", "gpio35", "gpio36", @@ -165,6 +179,26 @@ output-high; }; }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; }; gsbi@16300000 { @@ -191,7 +225,7 @@ pinctrl-0 = <&spi_pins>; pinctrl-names = "default"; - cs-gpios = <&qcom_pinmux 20 0>; + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; flash: m25p80@0 { compatible = "jedec,spi-nor"; @@ -214,7 +248,7 @@ pinctrl-0 = <&spi6_pins>; pinctrl-names = "default"; - cs-gpios = <&qcom_pinmux 57 0>; + cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; spi-nor@0 { compatible = "spi-nor"; @@ -251,10 +285,16 @@ usb30@0 { status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; }; usb30@1 { status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; }; pcie0: pci@1b500000 { @@ -336,14 +376,16 @@ label = "firmware"; reg = <0x1480000 0x2000000>; }; - }; mdio0: mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { device_type = "ethernet-phy"; @@ -399,6 +441,9 @@ qcom,irq = <255>; mdiobus = <&mdio0>; + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + mtd-mac-address = <&art 6>; fixed-link { @@ -435,10 +480,12 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; wifi { label = "wifi"; - gpios = <&qcom_pinmux 6 1>; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_RFKILL>; debounce-interval = <60>; wakeup-source; @@ -446,7 +493,7 @@ reset { label = "reset"; - gpios = <&qcom_pinmux 54 1>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; debounce-interval = <60>; wakeup-source; @@ -454,7 +501,7 @@ wps { label = "wps"; - gpios = <&qcom_pinmux 65 1>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; linux,code = <KEY_WPS_BUTTON>; debounce-interval = <60>; wakeup-source; @@ -463,79 +510,58 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; power_white: power_white { label = "r7800:white:power"; - gpios = <&qcom_pinmux 53 0>; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; default-state = "on"; }; power_amber: power_amber { label = "r7800:amber:power"; - gpios = <&qcom_pinmux 9 0>; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; }; wan_white { label = "r7800:white:wan"; - gpios = <&qcom_pinmux 22 0>; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; }; wan_amber { label = "r7800:amber:wan"; - gpios = <&qcom_pinmux 23 0>; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; }; usb1 { label = "r7800:white:usb1"; - gpios = <&qcom_pinmux 7 0>; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; }; usb2 { label = "r7800:white:usb2"; - gpios = <&qcom_pinmux 8 0>; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; }; esata { label = "r7800:white:esata"; - gpios = <&qcom_pinmux 26 0>; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; }; rfkill { label = "r7800:white:rfkill"; - gpios = <&qcom_pinmux 64 0>; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; }; wps { label = "r7800:white:wps"; - gpios = <&qcom_pinmux 24 0>; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; }; wifi { label = "r7800:white:wifi"; - gpios = <&qcom_pinmux 67 0>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb1-power { - gpio-export,name = "usb1"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 15 0>; - }; - - usb2-power { - gpio-export,name = "usb2"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 16 0>; - }; - - usb-power { - gpio-export,name = "usb_p"; - gpio-export,output = <1>; - gpios = <&qcom_pinmux 68 0>; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>; }; }; }; |