aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x')
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/board.d/01_leds8
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/board.d/02_network9
-rw-r--r--target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata29
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh110
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/platform.sh5
-rw-r--r--target/linux/ipq806x/config-4.913
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts244
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi1142
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts322
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts316
-rw-r--r--target/linux/ipq806x/image/Makefile75
-rw-r--r--target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch27
-rw-r--r--target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch33
-rw-r--r--target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch77
-rw-r--r--target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch23
-rw-r--r--target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch28
-rw-r--r--target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch23
-rw-r--r--target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch225
-rw-r--r--target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch8
-rw-r--r--target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch109
-rw-r--r--target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch130
-rw-r--r--target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch35
-rw-r--r--target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch105
-rw-r--r--target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch29
-rw-r--r--target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch53
-rw-r--r--target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch2690
-rw-r--r--target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch52
-rw-r--r--target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch46
-rw-r--r--target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch4602
-rw-r--r--target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch92
-rw-r--r--target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch429
-rw-r--r--target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch25
-rw-r--r--target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch1328
-rw-r--r--target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch236
-rw-r--r--target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch370
-rw-r--r--target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch1267
-rw-r--r--target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch209
-rw-r--r--target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch166
-rw-r--r--target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch44
-rw-r--r--target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch78
-rw-r--r--target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch11
-rw-r--r--target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch27
-rw-r--r--target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch42
-rw-r--r--target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch32
-rw-r--r--target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch17
-rw-r--r--target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch13
-rw-r--r--target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch115
-rw-r--r--target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch10
48 files changed, 3 insertions, 15076 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index ea8b7817cb..98aac707d5 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,14 +11,6 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
-avm,fritzbox-4040)
- ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
- ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
- ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
- ;;
-glinet,gl-b1300)
- ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
- ;;
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 74223e5b47..e279cdd8f6 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,11 +12,6 @@ board_config_update
board=$(board_name)
case "$board" in
-avm,fritzbox-4040)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" \
- "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
- ;;
linksys,ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ucidef_add_switch "switch0" \
@@ -33,10 +28,6 @@ tplink,vr2600v)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
;;
-glinet,gl-b1300 |\
-openmesh,a42)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
qcom,ipq8064-db149)
ucidef_set_interface_lan "eth1 eth2 eth3"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index fa8eb11857..ed99bd5ea8 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -45,35 +45,6 @@ board=$(board_name)
case "$FIRMWARE" in
-"ath10k/pre-cal-ahb-a000000.wifi.bin")
- case "$board" in
- avm,fritzbox-4040)
- /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
- ;;
- openmesh,a42)
- ath10kcal_extract "0:ART" 4096 12064
- ;;
- glinet,gl-b1300 |\
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 4096 12064
- ;;
- esac
- ;;
-"ath10k/pre-cal-ahb-a800000.wifi.bin")
- case "$board" in
- avm,fritzbox-4040)
- /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
- ;;
- openmesh,a42)
- ath10kcal_extract "0:ART" 20480 12064
- ;;
- glinet,gl-b1300 |\
- qcom,ap-dk01.1-c1)
- ath10kcal_extract "ART" 20480 12064
- ;;
- esac
- ;;
-
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
linksys,ea8500)
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh b/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh
deleted file mode 100644
index a2c79d9e44..0000000000
--- a/target/linux/ipq806x/base-files/lib/upgrade/openmesh.sh
+++ /dev/null
@@ -1,110 +0,0 @@
-# The U-Boot loader of the OpenMesh devices requires image sizes and
-# checksums to be provided in the U-Boot environment.
-# The OpenMesh devices come with 2 main partitions - while one is active
-# sysupgrade will flash the other. The boot order is changed to boot the
-# newly flashed partition. If the new partition can't be booted due to
-# upgrade failures the previously used partition is loaded.
-
-platform_do_upgrade_openmesh() {
- local tar_file="$1"
- local restore_backup
- local primary_kernel_mtd
-
- local setenv_script="/tmp/fw_env_upgrade"
-
- local kernel_mtd="$(find_mtd_index $PART_NAME)"
- local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
- local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
-
- # detect to which flash region the new image is written to.
- #
- # 1. check what is the mtd index for the first flash region on this
- # device
- # 2. check if the target partition ("inactive") has the mtd index of
- # the first flash region
- #
- # - when it is: the new bootseq will be 1,2 and the first region is
- # modified
- # - when it isnt: bootseq will be 2,1 and the second region is
- # modified
- #
- # The detection has to be done via the hardcoded mtd partition because
- # the current boot might be done with the fallback region. Let us
- # assume that the current bootseq is 1,2. The bootloader detected that
- # the image in flash region 1 is corrupt and thus switches to flash
- # region 2. The bootseq in the u-boot-env is now still the same and
- # the sysupgrade code can now only rely on the actual mtd indexes and
- # not the bootseq variable to detect the currently booted flash
- # region/image.
- #
- # In the above example, an implementation which uses bootseq ("1,2") to
- # detect the currently booted image would assume that region 1 is booted
- # and then overwrite the variables for the wrong flash region (aka the
- # one which isn't modified). This could result in a device which doesn't
- # boot anymore to Linux until it was reflashed with ap51-flash.
- local next_boot_part="1"
- case "$(board_name)" in
- openmesh,a42)
- primary_kernel_mtd=8
- ;;
- *)
- echo "failed to detect primary kernel mtd partition for board"
- return 1
- ;;
- esac
- [ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
-
- local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
- board_dir=${board_dir%/}
-
- local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
- local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
- # rootfs without EOF marker
- rootfs_length=$((rootfs_length-4))
-
- local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
- # md5 checksum of rootfs with EOF marker
- local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
-
- #
- # add tar support to get_image() to use default_do_upgrade() instead?
- #
-
- # take care of restoring a saved config
- [ "$SAVE_CONFIG" -eq 1 ] && restore_backup="${MTD_CONFIG_ARGS} -j ${CONF_TAR}"
-
- # write concatinated kernel + rootfs to flash
- tar xf $tar_file ${board_dir}/kernel ${board_dir}/root -O | \
- mtd $restore_backup write - $PART_NAME
-
- # prepare new u-boot env
- if [ "$next_boot_part" = "1" ]; then
- echo "bootseq 1,2" > $setenv_script
- else
- echo "bootseq 2,1" > $setenv_script
- fi
-
- printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
- printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
- printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
- printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
-
- printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
- printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
- printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
- printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
-
- # store u-boot env changes
- fw_setenv -s $setenv_script || {
- echo "failed to update U-Boot environment"
- return 1
- }
-}
-
-# create /var/lock for the lock "fw_setenv.lock" of fw_setenv
-# the rest is copied using ipq806x's RAMFS_COPY_BIN and RAMFS_COPY_DATA
-platform_add_ramfs_ubootenv()
-{
- mkdir -p $RAM_ROOT/var/lock
-}
-append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 5561dd538c..c0deeda889 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -17,15 +17,10 @@ platform_do_upgrade() {
netgear,r7500 |\
netgear,r7500v2 |\
netgear,r7800 |\
- qcom,ap-dk04.1-c1 |\
qcom,ipq8064-ap148 |\
zyxel,nbg6817)
nand_do_upgrade "$ARGV"
;;
- openmesh,a42)
- PART_NAME="inactive"
- platform_do_upgrade_openmesh "$ARGV"
- ;;
tplink,c2600)
PART_NAME="os-image:rootfs"
MTD_CONFIG_ARGS="-s 0x200000"
diff --git a/target/linux/ipq806x/config-4.9 b/target/linux/ipq806x/config-4.9
index a71b1b819b..6bc3daf277 100644
--- a/target/linux/ipq806x/config-4.9
+++ b/target/linux/ipq806x/config-4.9
@@ -2,7 +2,6 @@ CONFIG_ALIGNMENT_TRAP=y
# CONFIG_AMBA_PL08X is not set
CONFIG_APQ_GCC_8084=y
CONFIG_APQ_MMCC_8084=y
-CONFIG_AR40XX_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
@@ -11,7 +10,6 @@ CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_IPQ40XX=y
# CONFIG_ARCH_MDM9615 is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MSM8960=y
@@ -60,7 +58,6 @@ CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
@@ -164,7 +161,6 @@ CONFIG_DYNAMIC_DEBUG=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
-CONFIG_ESSEDMA=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
@@ -190,8 +186,6 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WATCHDOG=y
-# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
@@ -257,7 +251,7 @@ CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
-CONFIG_IPQ_GCC_4019=y
+# CONFIG_IPQ_GCC_4019 is not set
CONFIG_IPQ_GCC_806X=y
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
@@ -277,7 +271,6 @@ CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MDIO_GPIO=y
-CONFIG_MDIO_IPQ40XX=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
# CONFIG_MFD_MAX77620 is not set
@@ -378,7 +371,7 @@ CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_APQ8064=y
# CONFIG_PINCTRL_APQ8084 is not set
-CONFIG_PINCTRL_IPQ4019=y
+# CONFIG_PINCTRL_IPQ4019 is not set
CONFIG_PINCTRL_IPQ8064=y
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
@@ -444,7 +437,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
@@ -483,7 +475,6 @@ CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_IPQ4019_PHY=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USE_OF=y
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts
deleted file mode 100644
index 887be993e8..0000000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-a42.dts
+++ /dev/null
@@ -1,244 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include "qcom-ipq4019-bus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "OpenMesh A42";
- compatible = "openmesh,a42", "qcom,ipq4019";
-
- reserved-memory {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
-
- rsvd1@87000000 {
- reg = <0x87000000 0x500000>;
- no-map;
- };
-
- wifi_dump@87500000 {
- reg = <0x87500000 0x600000>;
- no-map;
- };
-
- rsvd2@87B00000 {
- reg = <0x87b00000 0x500000>;
- no-map;
- };
- };
-
- soc {
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "ok";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- pinctrl@1000000 {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "ok";
- };
-
- spi_0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "ok";
- cs-gpios = <&tlmm 54 0>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- /* partitions are passed via bootloader */
- };
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "ok";
- };
-
- cryptobam: dma@8e04000 {
- status = "ok";
- };
-
- crypto@8e3a000 {
- status = "ok";
- };
-
- watchdog@b017000 {
- status = "ok";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "ok";
- };
-
- usb2: usb2@60f8800 {
- status = "ok";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- wifi@a000000 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A42";
- };
-
- wifi@a800000 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A42";
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- red {
- label = "a42:red:status";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
- power: green {
- label = "a42:green:status";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "a42:blue:status";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- /* hw_margin_ms is actually 300s but driver limits it to 60s */
- hw_margin_ms = <60000>;
- always-running;
- };
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi
deleted file mode 100644
index 169505973f..0000000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi
+++ /dev/null
@@ -1,1142 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <dt-bindings/msm/msm-bus-ids.h>
-
-/ {
-
-soc {
- ad_hoc_bus: ad-hoc-bus {
- compatible = "qcom,msm-bus-device";
- reg = <0x580000 0x14000>,
- <0x500000 0x11000>;
- reg-names = "snoc-base", "pcnoc-base";
-
- /*Buses*/
-
- fab_pcnoc: fab-pcnoc {
- cell-id = <MSM_BUS_FAB_PERIPH_NOC>;
- label = "fab-pcnoc";
- qcom,fab-dev;
- qcom,base-name = "pcnoc-base";
- qcom,bypass-qos-prg;
- qcom,bus-type = <1>;
- qcom,qos-off = <0x1000>;
- qcom,base-offset = <0x0>;
- clocks = <>;
- };
-
- fab_snoc: fab-snoc {
- cell-id = <MSM_BUS_FAB_SYS_NOC>;
- label = "fab-snoc";
- qcom,fab-dev;
- qcom,base-name = "snoc-base";
- qcom,bypass-qos-prg;
- qcom,bus-type = <1>;
- qcom,qos-off = <0x80>;
- qcom,base-offset = <0x0>;
- clocks = <>;
- };
-
- /*Masters*/
-
- mas_blsp_bam: mas-blsp-bam {
- cell-id = <MSM_BUS_MASTER_BLSP_BAM>;
- label = "mas-blsp-bam";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_0>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_BLSP_BAM>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_usb2_bam: mas-usb2-bam {
- cell-id = <MSM_BUS_MASTER_USB2_BAM>;
- label = "mas-usb2-bam";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <15>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&slv_pcnoc_snoc>;
- qcom,prio1 = <1>;
- qcom,prio0 = <1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_USB2_BAM>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_adss_dma0: mas-adss-dma0 {
- cell-id = <MSM_BUS_MASTER_ADDS_DMA0>;
- label = "mas-adss-dma0";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA0>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_adss_dma1: mas-adss-dma1 {
- cell-id = <MSM_BUS_MASTER_ADDS_DMA1>;
- label = "mas-adss-dma1";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA1>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_adss_dma2: mas-adss-dma2 {
- cell-id = <MSM_BUS_MASTER_ADDS_DMA2>;
- label = "mas-adss-dma2";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA2>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_adss_dma3: mas-adss-dma3 {
- cell-id = <MSM_BUS_MASTER_ADDS_DMA3>;
- label = "mas-adss-dma3";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA3>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_qpic_bam: mas-qpic-bam {
- cell-id = <MSM_BUS_MASTER_QPIC_BAM>;
- label = "mas-qpic-bam";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_0>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_QPIC_BAM>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_spdm: mas-spdm {
- cell-id = <MSM_BUS_MASTER_SPDM>;
- label = "mas-spdm";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_m_0>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_SPDM>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_pcnoc_cfg: mas-pcnoc-cfg {
- cell-id = <MSM_BUS_MASTER_PNOC_CFG>;
- label = "mas-pcnoc-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&slv_srvc_pcnoc>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_CFG>;
- };
-
- mas_tic: mas-tic {
- cell-id = <MSM_BUS_MASTER_TIC>;
- label = "mas-tic";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_TIC>;
- };
-
- mas_sdcc_bam: mas-sdcc-bam {
- cell-id = <MSM_BUS_MASTER_SDCC_BAM>;
- label = "mas-sdcc-bam";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <14>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&slv_pcnoc_snoc>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_SDCC_BAM>;
- qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg
- &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg
- &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg
- &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg
- &slv_srif &slv_prng &slv_qdss_cfg
- &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt
- &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg
- &slv_boot_rom &slv_security &slv_spdm
- &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg
- &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl
- &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg
- &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg
- &slv_sdcc_cfg &slv_snoc_cfg>;
- };
-
- mas_snoc_pcnoc: mas-snoc-pcnoc {
- cell-id = <MSM_BUS_SNOC_PNOC_MAS>;
- label = "mas-snoc-pcnoc";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <16>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&pcnoc_int_0>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_SNOC_PCNOC>;
- };
-
- mas_qdss_dap: mas-qdss-dap {
- cell-id = <MSM_BUS_MASTER_QDSS_DAP>;
- label = "mas-qdss-dap";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_QDSS_DAP>;
- };
-
- mas_ddrc_snoc: mas-ddrc-snoc {
- cell-id = <MSM_BUS_MASTER_DDRC_SNOC>;
- label = "mas-ddrc-snoc";
- qcom,buswidth = <16>;
- qcom,ap-owned;
- qcom,connections = <&snoc_int_0 &snoc_int_1
- &slv_pcie>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_DDRC_SNOC>;
- qcom,blacklist = <&slv_snoc_ddrc_m1 &slv_srvc_snoc>;
- };
-
- mas_wss_0: mas-wss-0 {
- cell-id = <MSM_BUS_MASTER_WSS_0>;
- label = "mas-wss-0";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <26>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_WSS_0>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie
- &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg
- &slv_srvc_snoc>;
- };
-
- mas_wss_1: mas-wss-1 {
- cell-id = <MSM_BUS_MASTER_WSS_1>;
- label = "mas-wss-1";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <27>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_WSS_1>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie
- &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg
- &slv_srvc_snoc>;
- };
-
- mas_crypto: mas-crypto {
- cell-id = <MSM_BUS_MASTER_CRYPTO>;
- label = "mas-crypto";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <5>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &snoc_int_1
- &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_CRYPTO>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
- &slv_pcie &slv_qdss_stm &slv_crypto_cfg
- &slv_srvc_snoc>;
- };
-
- mas_ess: mas-ess {
- cell-id = <MSM_BUS_MASTER_ESS>;
- label = "mas-ess";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <44>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_ESS>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
- &slv_pcie &slv_qdss_stm &slv_wss1_cfg
- &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
- };
-
- mas_pcie: mas-pcie {
- cell-id = <MSM_BUS_MASTER_PCIE>;
- label = "mas-pcie";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <6>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCIE>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie
- &slv_qdss_stm &slv_wss1_cfg &slv_wss0_cfg
- &slv_crypto_cfg &slv_srvc_snoc>;
- };
-
- mas_usb3: mas-usb3 {
- cell-id = <MSM_BUS_MASTER_USB3>;
- label = "mas-usb3";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <7>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_USB3>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
- &slv_pcie &slv_qdss_stm &slv_wss1_cfg
- &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
- };
-
- mas_qdss_etr: mas-qdss-etr {
- cell-id = <MSM_BUS_MASTER_QDSS_ETR>;
- label = "mas-qdss-etr";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,qport = <544>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&qdss_int>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_QDSS_ETR>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
- &slv_pcie &slv_qdss_stm &slv_wss1_cfg
- &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
- };
-
- mas_qdss_bamndp: mas-qdss-bamndp {
- cell-id = <MSM_BUS_MASTER_QDSS_BAMNDP>;
- label = "mas-qdss-bamndp";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <576>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&qdss_int>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_QDSS_BAMNDP>;
- qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss
- &slv_pcie &slv_qdss_stm &slv_wss1_cfg
- &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>;
- };
-
- mas_pcnoc_snoc: mas-pcnoc-snoc {
- cell-id = <MSM_BUS_PNOC_SNOC_MAS>;
- label = "mas-pcnoc-snoc";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <384>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&snoc_int_0 &snoc_int_1
- &slv_snoc_ddrc_m1>;
- qcom,prio1 = <0>;
- qcom,prio0 = <0>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PNOC_SNOC>;
- qcom,blacklist = <&slv_srvc_snoc>;
- };
-
- mas_snoc_cfg: mas-snoc-cfg {
- cell-id = <MSM_BUS_MASTER_QDSS_SNOC_CFG>;
- label = "mas-snoc-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&slv_srvc_snoc>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_QDSS_SNOC_CFG>;
- };
-
- /*Internal nodes*/
-
-
- pcnoc_m_0: pcnoc-m-0 {
- cell-id = <MSM_BUS_PNOC_M_0>;
- label = "pcnoc-m-0";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <12>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&slv_pcnoc_snoc>;
- qcom,prio1 = <1>;
- qcom,prio0 = <1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_M_0>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_M_0>;
- };
-
- pcnoc_m_1: pcnoc-m-1 {
- cell-id = <MSM_BUS_PNOC_M_1>;
- label = "pcnoc-m-1";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,qport = <13>;
- qcom,qos-mode = "fixed";
- qcom,connections = <&slv_pcnoc_snoc>;
- qcom,prio1 = <1>;
- qcom,prio0 = <1>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_M_1>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_M_1>;
- };
-
- pcnoc_int_0: pcnoc-int-0 {
- cell-id = <MSM_BUS_PNOC_INT_0>;
- label = "pcnoc-int-0";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,connections = < &pcnoc_s_1 &pcnoc_s_2 &pcnoc_s_0
- &pcnoc_s_4 &pcnoc_s_5
- &pcnoc_s_6 &pcnoc_s_7
- &pcnoc_s_8 &pcnoc_s_9
- &pcnoc_s_3>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_INT_0>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_INT_0>;
- };
-
- pcnoc_s_0: pcnoc-s-0 {
- cell-id = <MSM_BUS_PNOC_SLV_0>;
- label = "pcnoc-s-0";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&slv_clk_ctl &slv_tcsr &slv_security
- &slv_tlmm>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_0>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_0>;
- };
-
- pcnoc_s_1: pcnoc-s-1 {
- cell-id = <MSM_BUS_PNOC_SLV_1>;
- label = "pcnoc-s-1";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_prng_apu_cfg &slv_prng&slv_imem_cfg>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_1>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_1>;
- };
-
- pcnoc_s_2: pcnoc-s-2 {
- cell-id = <MSM_BUS_PNOC_SLV_2>;
- label = "pcnoc-s-2";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_spdm &slv_pcnoc_mpu_cfg &slv_pcnoc_cfg
- &slv_boot_rom>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_2>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_2>;
- };
-
- pcnoc_s_3: pcnoc-s-3 {
- cell-id = <MSM_BUS_PNOC_SLV_3>;
- label = "pcnoc-s-3";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_qdss_cfg&slv_gcnt &slv_snoc_cfg
- &slv_snoc_mpu_cfg>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_3>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_3>;
- };
-
- pcnoc_s_4: pcnoc-s-4 {
- cell-id = <MSM_BUS_PNOC_SLV_4>;
- label = "pcnoc-s-4";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&slv_adss_cfg &slv_adss_vmidmt_cfg &slv_adss_apu>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_4>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_4>;
- };
-
- pcnoc_s_5: pcnoc-s-5 {
- cell-id = <MSM_BUS_PNOC_SLV_5>;
- label = "pcnoc-s-5";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = <&slv_qhss_apu_cfg &slv_fephy_cfg &slv_mdio
- &slv_srif>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_5>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_5>;
- };
-
- pcnoc_s_6: pcnoc-s-6 {
- cell-id = <MSM_BUS_PNOC_SLV_6>;
- label = "pcnoc-s-6";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_ddrc_mpu0_cfg &slv_ddrc_apu_cfg &slv_ddrc_mpu2_cfg
- &slv_ddrc_cfg &slv_ddrc_mpu1_cfg>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_6>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_6>;
- };
-
- pcnoc_s_7: pcnoc-s-7 {
- cell-id = <MSM_BUS_PNOC_SLV_7>;
- label = "pcnoc-s-7";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_ess_apu_cfg &slv_usb2_cfg&slv_ess_vmidmt_cfg>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_7>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_7>;
- };
-
- pcnoc_s_8: pcnoc-s-8 {
- cell-id = <MSM_BUS_PNOC_SLV_8>;
- label = "pcnoc-s-8";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_sdcc_cfg &slv_qpic_cfg&slv_blsp_cfg>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_8>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_8>;
- };
-
- pcnoc_s_9: pcnoc-s-9 {
- cell-id = <MSM_BUS_PNOC_SLV_9>;
- label = "pcnoc-s-9";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,connections = < &slv_wss1_apu_cfg &slv_wss1_vmidmt_cfg&slv_wss0_vmidmt_cfg
- &slv_wss0_apu_cfg>;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_9>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_9>;
- };
-
- snoc_int_0: snoc-int-0 {
- cell-id = <MSM_BUS_SNOC_INT_0>;
- label = "snoc-int-0";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,connections = < &slv_ocimem&slv_qdss_stm>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_SNOC_INT_0>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_INT_0>;
- };
-
- snoc_int_1: snoc-int-1 {
- cell-id = <MSM_BUS_SNOC_INT_1>;
- label = "snoc-int-1";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,connections = < &slv_crypto_cfg &slv_a7ss &slv_ess_cfg
- &slv_usb3_cfg &slv_wss1_cfg
- &slv_wss0_cfg>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_SNOC_INT_1>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_INT_1>;
- };
-
- qdss_int: qdss-int {
- cell-id = <MSM_BUS_SNOC_QDSS_INT>;
- label = "qdss-int";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>;
- qcom,bus-dev = <&fab_snoc>;
- qcom,mas-rpm-id = <ICBID_MASTER_QDSS_INT>;
- qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_INT>;
- };
- /*Slaves*/
-
- slv_clk_ctl:slv-clk-ctl {
- cell-id = <MSM_BUS_SLAVE_CLK_CTL>;
- label = "slv-clk-ctl";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_CLK_CTL>;
- };
-
- slv_security:slv-security {
- cell-id = <MSM_BUS_SLAVE_SECURITY>;
- label = "slv-security";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SECURITY>;
- };
-
- slv_tcsr:slv-tcsr {
- cell-id = <MSM_BUS_SLAVE_TCSR>;
- label = "slv-tcsr";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_TCSR>;
- };
-
- slv_tlmm:slv-tlmm {
- cell-id = <MSM_BUS_SLAVE_TLMM>;
- label = "slv-tlmm";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_TLMM>;
- };
-
- slv_imem_cfg:slv-imem-cfg {
- cell-id = <MSM_BUS_SLAVE_IMEM_CFG>;
- label = "slv-imem-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_IMEM_CFG>;
- };
-
- slv_prng:slv-prng {
- cell-id = <MSM_BUS_SLAVE_PRNG>;
- label = "slv-prng";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PRNG>;
- };
-
- slv_prng_apu_cfg:slv-prng-apu-cfg {
- cell-id = <MSM_BUS_SLAVE_PRNG_APU_CFG>;
- label = "slv-prng-apu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PRNG_APU_CFG>;
- };
-
- slv_boot_rom:slv-boot-rom {
- cell-id = <MSM_BUS_SLAVE_BOOT_ROM>;
- label = "slv-boot-rom";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_BOOT_ROM>;
- };
-
- slv_spdm:slv-spdm {
- cell-id = <MSM_BUS_SLAVE_SPDM_WRAPPER>;
- label = "slv-spdm";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SPDM_WRAPPER>;
- };
-
- slv_pcnoc_cfg:slv-pcnoc-cfg {
- cell-id = <MSM_BUS_SLAVE_PNOC_CFG>;
- label = "slv-pcnoc-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PNOC_CFG>;
- };
-
- slv_pcnoc_mpu_cfg:slv-pcnoc-mpu-cfg {
- cell-id = <MSM_BUS_SLAVE_PERIPH_MPU_CFG>;
- label = "slv-pcnoc-mpu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PERIPH_MPU_CFG>;
- };
-
- slv_gcnt:slv-gcnt {
- cell-id = <MSM_BUS_SLAVE_GCNT>;
- label = "slv-gcnt";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_GCNT>;
- };
-
- slv_qdss_cfg:slv-qdss-cfg {
- cell-id = <MSM_BUS_SLAVE_QDSS_CFG>;
- label = "slv-qdss-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_CFG>;
- };
-
- slv_snoc_cfg:slv-snoc-cfg {
- cell-id = <MSM_BUS_SLAVE_SNOC_CFG>;
- label = "slv-snoc-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_CFG>;
- };
-
- slv_snoc_mpu_cfg:slv-snoc-mpu-cfg {
- cell-id = <MSM_BUS_SLAVE_SNOC_MPU_CFG>;
- label = "slv-snoc-mpu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_MPU_CFG>;
- };
-
- slv_adss_cfg:slv-adss-cfg {
- cell-id = <MSM_BUS_SLAVE_ADSS_CFG>;
- label = "slv-adss-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_CFG>;
- };
-
- slv_adss_apu:slv-adss-apu {
- cell-id = <MSM_BUS_SLAVE_ADSS_VMIDMT_CFG>;
- label = "slv-adss-apu";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_APU>;
- };
-
- slv_adss_vmidmt_cfg:slv-adss-vmidmt-cfg {
- cell-id = <MSM_BUS_SLAVE_ADSS_VMIDMT_CFG>;
- label = "slv-adss-vmidmt-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_VMIDMT_CFG>;
- };
-
- slv_qhss_apu_cfg:slv-qhss-apu-cfg {
- cell-id = <MSM_BUS_SLAVE_QHSS_APU_CFG>;
- label = "slv-qhss-apu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_QHSS_APU_CFG>;
- };
-
- slv_mdio:slv-mdio {
- cell-id = <MSM_BUS_SLAVE_MDIO>;
- label = "slv-mdio";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_MDIO>;
- };
-
- slv_fephy_cfg:slv-fephy-cfg {
- cell-id = <MSM_BUS_SLAVE_FEPHY_CFG>;
- label = "slv-fephy-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_FEPHY_CFG>;
- };
-
- slv_srif:slv-srif {
- cell-id = <MSM_BUS_SLAVE_SRIF>;
- label = "slv-srif";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SRIF>;
- };
-
- slv_ddrc_cfg:slv-ddrc-cfg {
- cell-id = <MSM_BUS_SLAVE_DDRC_CFG>;
- label = "slv-ddrc-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_CFG>;
- };
-
- slv_ddrc_apu_cfg:slv-ddrc-apu-cfg {
- cell-id = <MSM_BUS_SLAVE_DDRC_APU_CFG>;
- label = "slv-ddrc-apu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_APU_CFG>;
- };
-
- slv_ddrc_mpu0_cfg:slv-ddrc-mpu0-cfg {
- cell-id = <MSM_BUS_SLAVE_MPU0_CFG>;
- label = "slv-ddrc-mpu0-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU0_CFG>;
- };
-
- slv_ddrc_mpu1_cfg:slv-ddrc-mpu1-cfg {
- cell-id = <MSM_BUS_SLAVE_MPU1_CFG>;
- label = "slv-ddrc-mpu1-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU1_CFG>;
- };
-
- slv_ddrc_mpu2_cfg:slv-ddrc-mpu2-cfg {
- cell-id = <MSM_BUS_SLAVE_MPU2_CFG>;
- label = "slv-ddrc-mpu2-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU2_CFG>;
- };
-
- slv_ess_vmidmt_cfg:slv-ess-vmidmt-cfg {
- cell-id = <MSM_BUS_SLAVE_ESS_VMIDMT_CFG>;
- label = "slv-ess-vmidmt-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_ESS_VMIDMT_CFG>;
- };
-
- slv_ess_apu_cfg:slv-ess-apu-cfg {
- cell-id = <MSM_BUS_SLAVE_ESS_APU_CFG>;
- label = "slv-ess-apu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_ESS_APU_CFG>;
- };
-
- slv_usb2_cfg:slv-usb2-cfg {
- cell-id = <MSM_BUS_SLAVE_USB2_CFG>;
- label = "slv-usb2-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_USB2_CFG>;
- };
-
- slv_blsp_cfg:slv-blsp-cfg {
- cell-id = <MSM_BUS_SLAVE_BLSP_CFG>;
- label = "slv-blsp-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_BLSP_CFG>;
- };
-
- slv_qpic_cfg:slv-qpic-cfg {
- cell-id = <MSM_BUS_SLAVE_QPIC_CFG>;
- label = "slv-qpic-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_QPIC_CFG>;
- };
-
- slv_sdcc_cfg:slv-sdcc-cfg {
- cell-id = <MSM_BUS_SLAVE_SDCC_CFG>;
- label = "slv-sdcc-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SDCC_CFG>;
- };
-
- slv_wss0_vmidmt_cfg:slv-wss0-vmidmt-cfg {
- cell-id = <MSM_BUS_SLAVE_WSS0_VMIDMT_CFG>;
- label = "slv-wss0-vmidmt-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_VMIDMT_CFG>;
- };
-
- slv_wss0_apu_cfg:slv-wss0-apu-cfg {
- cell-id = <MSM_BUS_SLAVE_WSS0_APU_CFG>;
- label = "slv-wss0-apu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_APU_CFG>;
- };
-
- slv_wss1_vmidmt_cfg:slv-wss1-vmidmt-cfg {
- cell-id = <MSM_BUS_SLAVE_WSS1_VMIDMT_CFG>;
- label = "slv-wss1-vmidmt-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_VMIDMT_CFG>;
- };
-
- slv_wss1_apu_cfg:slv-wss1-apu-cfg {
- cell-id = <MSM_BUS_SLAVE_WSS1_APU_CFG>;
- label = "slv-wss1-apu-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_APU_CFG>;
- };
-
- slv_pcnoc_snoc:slv-pcnoc-snoc {
- cell-id = <MSM_BUS_PNOC_SNOC_SLV>;
- label = "slv-pcnoc-snoc";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_SNOC>;
- };
-
- slv_srvc_pcnoc:slv-srvc-pcnoc {
- cell-id = <MSM_BUS_SLAVE_SRVC_PCNOC>;
- label = "slv-srvc-pcnoc";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_pcnoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SRVC_PCNOC>;
- };
-
- slv_snoc_ddrc_m1:slv-snoc-ddrc-m1 {
- cell-id = <MSM_BUS_SLAVE_SNOC_DDRC>;
- label = "slv-snoc-ddrc-m1";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_DDRC>;
- };
-
- slv_a7ss:slv-a7ss {
- cell-id = <MSM_BUS_SLAVE_A7SS>;
- label = "slv-a7ss";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_A7SS>;
- };
-
- slv_ocimem:slv-ocimem {
- cell-id = <MSM_BUS_SLAVE_OCIMEM>;
- label = "slv-ocimem";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_OCIMEM>;
- };
-
- slv_wss0_cfg:slv-wss0-cfg {
- cell-id = <MSM_BUS_SLAVE_WSS0_CFG>;
- label = "slv-wss0-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_CFG>;
- };
-
- slv_wss1_cfg:slv-wss1-cfg {
- cell-id = <MSM_BUS_SLAVE_WSS1_CFG>;
- label = "slv-wss1-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_CFG>;
- };
-
- slv_pcie:slv-pcie {
- cell-id = <MSM_BUS_SLAVE_PCIE>;
- label = "slv-pcie";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_PCIE>;
- };
-
- slv_usb3_cfg:slv-usb3-cfg {
- cell-id = <MSM_BUS_SLAVE_USB3_CFG>;
- label = "slv-usb3-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_USB3_CFG>;
- };
-
- slv_crypto_cfg:slv-crypto-cfg {
- cell-id = <MSM_BUS_SLAVE_CRYPTO_CFG>;
- label = "slv-crypto-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_CRYPTO_CFG>;
- };
-
- slv_ess_cfg:slv-ess-cfg {
- cell-id = <MSM_BUS_SLAVE_ESS_CFG>;
- label = "slv-ess-cfg";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_ESS_CFG>;
- };
-
- slv_qdss_stm:slv-qdss-stm {
- cell-id = <MSM_BUS_SLAVE_QDSS_STM>;
- label = "slv-qdss-stm";
- qcom,buswidth = <4>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_STM>;
- };
-
- slv_srvc_snoc:slv-srvc-snoc {
- cell-id = <MSM_BUS_SLAVE_SRVC_SNOC>;
- label = "slv-srvc-snoc";
- qcom,buswidth = <8>;
- qcom,ap-owned;
- qcom,bus-dev = <&fab_snoc>;
- qcom,slv-rpm-id = <ICBID_SLAVE_SRVC_SNOC>;
- };
- };
-};
-
-};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
deleted file mode 100644
index f5ca3d5c56..0000000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
+++ /dev/null
@@ -1,322 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include "qcom-ipq4019-bus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Box 4040";
- compatible = "avm,fritzbox-4040", "qcom,ipq4019";
-
- aliases {
- led-boot = &power;
- led-failsafe = &flash;
- led-running = &power;
- led-upgrade = &flash;
- };
-
- reserved-memory {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
-
- tz_apps@87b80000 {
- reg = <0x87b80000 0x280000>;
- reusable;
- };
-
- smem@87e00000 {
- reg = <0x87e00000 0x080000>;
- no-map;
- };
-
- tz@87e80000 {
- reg = <0x87e80000 0x180000>;
- no-map;
- };
- };
-
- soc {
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "ok";
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "ok";
- };
-
- usb3@8af8800 {
- status = "ok";
- };
-
- crypto@8e3a000 {
- status = "ok";
- };
-
- wifi@a000000 {
- status = "okay";
- };
-
- wifi@a800000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "ok";
- };
-
- qca8075: ess-switch@c000000 {
- status = "okay";
-
- #gpio-cells = <2>;
- gpio-controller;
-
- enable-usb-power {
- gpio-hog;
- line-name = "enable USB3 power";
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "fritz4040:green:wlan";
- gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
- };
-
- panic: info_red {
- label = "fritz4040:red:info";
- gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- wan {
- label = "fritz4040:green:wan";
- gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "fritz4040:green:power";
- gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
- };
-
- lan {
- label = "fritz4040:green:lan";
- gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
- };
-
- flash: info_amber {
- label = "fritz4040:amber:info";
- gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&cryptobam {
- status = "ok";
-};
-
-&blsp_dma {
- status = "ok";
-};
-
-&spi_0 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "ok";
- cs-gpios = <&tlmm 54 0>;
-
- mx25l25635f@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- spi-max-frequency = <24000000>;
- status = "ok";
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBLENV"; /* uboot env - empty */
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "urlader"; /* APPSBL */
- reg = <0x000f0000 0x0002dc000>;
- read-only;
- };
- partition7@11dc00 {
- /* make a backup of this partition! */
- label = "urlader_config";
- reg = <0x0011dc00 0x00002400>;
- read-only;
- };
- partition8@120000 {
- label = "tffs1";
- reg = <0x00120000 0x00080000>;
- read-only;
- };
- partition9@1a0000 {
- label = "tffs2";
- reg = <0x001a0000 0x00080000>;
- read-only;
- };
- partition10@220000 {
- label = "uboot";
- reg = <0x00220000 0x00080000>;
- read-only;
- };
- partition11@2A0000 {
- label = "firmware";
- reg = <0x002a0000 0x01c60000>;
- };
- partition12@1f00000 {
- label = "jffs2";
- reg = <0x01f00000 0x00100000>;
- };
- };
- };
-};
-
-&usb3_ss_phy {
- status = "ok";
-};
-
-&usb3_hs_phy {
- status = "ok";
-};
-
-&usb2_hs_phy {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts
deleted file mode 100644
index 53824e3c8d..0000000000
--- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts
+++ /dev/null
@@ -1,316 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "GL.iNet GL-B1300";
- compatible = "glinet,gl-b1300", "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- reserved-memory {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges;
-
- apps_bl@87000000 {
- reg = <0x87000000 0x400000>;
- no-map;
- };
-
- sbl@87400000 {
- reg = <0x87400000 0x100000>;
- no-map;
- };
-
- cnss_debug@87500000 {
- reg = <0x87500000 0x600000>;
- no-map;
- };
-
- cpu_context_dump@87b00000 {
- reg = <0x87b00000 0x080000>;
- no-map;
- };
-
- tz_apps@87b80000 {
- reg = <0x87b80000 0x280000>;
- no-map;
- };
-
- smem@87e00000 {
- reg = <0x87e00000 0x080000>;
- no-map;
- };
-
- tz@87e80000 {
- reg = <0x87e80000 0x180000>;
- no-map;
- };
- };
-
- soc {
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "ok";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- pinctrl@1000000 {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "ok";
- };
-
- spi_0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "ok";
- cs-gpios = <&tlmm 54 0>;
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "ok";
- };
-
- cryptobam: dma@8e04000 {
- status = "ok";
- };
-
- crypto@8e3a000 {
- status = "ok";
- };
-
- watchdog@b017000 {
- status = "ok";
- };
-
- usb3_ss_phy: ssphy@9a000 {
- status = "ok";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- status = "ok";
- };
-
- usb3: usb3@8af8800 {
- status = "ok";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "ok";
- };
-
- usb2: usb2@60f8800 {
- status = "ok";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- wifi@a000000 {
- status = "okay";
- };
-
- wifi@a800000 {
- status = "okay";
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- power {
- label = "gl-b1300:green:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- mesh {
- label = "gl-b1300:green:mesh";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
- wlan {
- label = "gl-b1300:green:wlan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi_0 {
- mx25l25635f@0 {
- compatible = "mx25l25635f", "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- MIBIB@40000 {
- label = "MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- QSEE@60000 {
- label = "QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- CDT@c0000 {
- label = "CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- DDRPARAMS@d0000 {
- label = "DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- APPSBLENV@e0000 {
- label = "APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- APPSBL@f0000 {
- label = "APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- ART@170000 {
- label = "ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- kernel@180000 {
- label = "kernel";
- reg = <0x180000 0x400000>;
- };
- rootfs@580000 {
- label = "rootfs";
- reg = <0x580000 0x1a80000>;
- };
- firmware@180000 {
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-}; \ No newline at end of file
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile
index c2d7255655..d41679ff97 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -73,21 +73,6 @@ define Device/ZyXELImage
IMAGE/mmcblk0p4-kernel.bin := append-kernel
endef
-define Device/avm_fritzbox-4040
- $(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-fritz4040
- KERNEL_LOADADDR := 0x80208000
- BLOCKSIZE := 4k
- PAGESIZE := 256
- BOARD_NAME := fritz4040
- DEVICE_TITLE := AVM Fritz!Box 4040
- IMAGE_SIZE := 29753344
- IMAGES = sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040
-endef
-TARGET_DEVICES += avm_fritzbox-4040
-
define Device/linksys_ea8500
$(call Device/LegacyImage)
DEVICE_DTS := qcom-ipq8064-ea8500
@@ -165,66 +150,6 @@ define Device/netgear_r7800
endef
TARGET_DEVICES += netgear_r7800
-define Device/glinet_gl-b1300
- DEVICE_TITLE := GL.iNet GL-B1300
- BOARD_NAME := gl-b1300
- DEVICE_DTS := qcom-ipq4019-gl-b1300
- KERNEL_LOADADDR := 0x80208000
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-glinet_gl-b1300
-endef
-TARGET_DEVICES += glinet_gl-b1300
-
-define Device/openmesh_a42
- $(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-a42
- KERNEL_LOADADDR := 0x80208000
- BLOCKSIZE := 64k
- SUPPORTED_DEVICES := openmesh,a42
- DEVICE_TITLE := OpenMesh A42
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
- IMAGE_SIZE := 15616k
- IMAGES = factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a42
-
-define Device/qcom_ap-dk01.1-c1
- DEVICE_TITLE := QCA AP-DK01.1-C1
- BOARD_NAME := ap-dk01.1-c1
- DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
- KERNEL_LOADADDR := 0x80208000
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca4019
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
- KERNEL_LOADADDR := 0x80208000
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4048k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap-dk04.1-c1
- DEVICE_TITLE := QCA AP-DK04.1-C1
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
define Device/qcom_ipq8064-ap148
$(call Device/FitImage)
$(call Device/UbiFit)
diff --git a/target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch b/target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch
deleted file mode 100644
index 06b61a07ef..0000000000
--- a/target/linux/ipq806x/patches-4.9/0015-cpufreq-dt-qcom-ipq4019-Add-compat-for-qcom-ipq4019.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 5543e93f51d5e23f9b3a7fe11a722c91fc410485 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Wed, 13 Apr 2016 14:03:14 -0500
-Subject: [PATCH 15/69] cpufreq: dt: qcom: ipq4019: Add compat for qcom ipq4019
-
-Instantiate cpufreq-dt-platdev driver for ipq4019 to support changing
-CPU frequencies.
-
-This depends on Viresh Kumar's patches in this series:
-http://comments.gmane.org/gmane.linux.power-management.general/73887
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- drivers/cpufreq/cpufreq-dt-platdev.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/cpufreq/cpufreq-dt-platdev.c
-+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
-@@ -35,6 +35,8 @@ static const struct of_device_id machine
-
- { .compatible = "marvell,berlin", },
-
-+ { .compatible = "qcom,ipq4019", },
-+
- { .compatible = "samsung,exynos3250", },
- { .compatible = "samsung,exynos4210", },
- { .compatible = "samsung,exynos4212", },
diff --git a/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch b/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch
deleted file mode 100644
index be9c4eb1b2..0000000000
--- a/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 5e2df5f44e35d79fff2ab8bbb8a726ad5de78a3e Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@qca.qualcomm.com>
-Date: Thu, 28 Apr 2016 12:55:08 -0500
-Subject: [PATCH 16/69] clk: ipq4019: report accurate fixed clock rates
-
-This looks like a copy-and-paste gone wrong, but update all
-the fixed clock rates to report the correct values.
-
-Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
----
- drivers/clk/qcom/gcc-ipq4019.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq4019.c
-+++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1327,12 +1327,12 @@ static int gcc_ipq4019_probe(struct plat
- {
- struct device *dev = &pdev->dev;
-
-- clk_register_fixed_rate(dev, "fepll125", "xo", 0, 200000000);
-- clk_register_fixed_rate(dev, "fepll125dly", "xo", 0, 200000000);
-- clk_register_fixed_rate(dev, "fepllwcss2g", "xo", 0, 200000000);
-- clk_register_fixed_rate(dev, "fepllwcss5g", "xo", 0, 200000000);
-+ clk_register_fixed_rate(dev, "fepll125", "xo", 0, 125000000);
-+ clk_register_fixed_rate(dev, "fepll125dly", "xo", 0, 125000000);
-+ clk_register_fixed_rate(dev, "fepllwcss2g", "xo", 0, 250000000);
-+ clk_register_fixed_rate(dev, "fepllwcss5g", "xo", 0, 250000000);
- clk_register_fixed_rate(dev, "fepll200", "xo", 0, 200000000);
-- clk_register_fixed_rate(dev, "fepll500", "xo", 0, 200000000);
-+ clk_register_fixed_rate(dev, "fepll500", "xo", 0, 500000000);
- clk_register_fixed_rate(dev, "ddrpllapss", "xo", 0, 666000000);
-
- return qcom_cc_probe(pdev, &gcc_ipq4019_desc);
diff --git a/target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch b/target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch
deleted file mode 100644
index 7cbd6a4551..0000000000
--- a/target/linux/ipq806x/patches-4.9/0017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 18c3b42575a154343831aec0637aab00e19440e1 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 17 Mar 2016 15:01:09 -0500
-Subject: [PATCH 17/69] qcom: ipq4019: add cpu operating points for cpufreq
- support
-
-This adds some operating points for cpu frequeny scaling
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++--------
- 1 file changed, 26 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -40,14 +40,7 @@
- reg = <0x0>;
- clocks = <&gcc GCC_APPS_CLK_SRC>;
- clock-frequency = <0>;
-- operating-points = <
-- /* kHz uV (fixed) */
-- 48000 1100000
-- 200000 1100000
-- 500000 1100000
-- 666000 1100000
-- >;
-- clock-latency = <256000>;
-+ operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu@1 {
-@@ -59,6 +52,7 @@
- reg = <0x1>;
- clocks = <&gcc GCC_APPS_CLK_SRC>;
- clock-frequency = <0>;
-+ operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu@2 {
-@@ -70,6 +64,7 @@
- reg = <0x2>;
- clocks = <&gcc GCC_APPS_CLK_SRC>;
- clock-frequency = <0>;
-+ operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu@3 {
-@@ -81,6 +76,29 @@
- reg = <0x3>;
- clocks = <&gcc GCC_APPS_CLK_SRC>;
- clock-frequency = <0>;
-+ operating-points-v2 = <&cpu0_opp_table>;
-+ };
-+ };
-+
-+ cpu0_opp_table: opp_table0 {
-+ compatible = "operating-points-v2";
-+ opp-shared;
-+
-+ opp@48000000 {
-+ opp-hz = /bits/ 64 <48000000>;
-+ clock-latency-ns = <256000>;
-+ };
-+ opp@200000000 {
-+ opp-hz = /bits/ 64 <200000000>;
-+ clock-latency-ns = <256000>;
-+ };
-+ opp@500000000 {
-+ opp-hz = /bits/ 64 <500000000>;
-+ clock-latency-ns = <256000>;
-+ };
-+ opp@666000000 {
-+ opp-hz = /bits/ 64 <666000000>;
-+ clock-latency-ns = <256000>;
- };
- };
-
diff --git a/target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch b/target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch
deleted file mode 100644
index 42bb4a6e3e..0000000000
--- a/target/linux/ipq806x/patches-4.9/0018-qcom-ipq4019-turn-on-DMA-for-i2c.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 71f82049dca86bc89b9da07e051e4ed492820233 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Mon, 28 Mar 2016 11:16:51 -0500
-Subject: [PATCH 18/69] qcom: ipq4019: turn on DMA for i2c
-
-These are the required nodes for i2c-qup to use DMA
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -179,6 +179,8 @@
- clock-names = "iface", "core";
- #address-cells = <1>;
- #size-cells = <0>;
-+ dmas = <&blsp_dma 9>, <&blsp_dma 8>;
-+ dma-names = "rx", "tx";
- status = "disabled";
- };
-
diff --git a/target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch b/target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch
deleted file mode 100644
index 54ee571cbb..0000000000
--- a/target/linux/ipq806x/patches-4.9/0019-qcom-ipq4019-use-correct-clock-for-i2c-bus-0.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 7292bf171cdf2fb48607058f12ddd0d812a87428 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@qca.qualcomm.com>
-Date: Fri, 29 Apr 2016 12:48:02 -0500
-Subject: [PATCH 19/69] qcom: ipq4019: use correct clock for i2c bus 0
-
-For the record the mapping is as follows:
-
-QUP0 = SPI QUP1
-QUP1 = SPI QUP2
-QUP2 = I2C QUP1
-QUP3 = I2C QUP2
-
-Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -175,7 +175,7 @@
- reg = <0x78b7000 0x6000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
-+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch b/target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch
deleted file mode 100644
index c1fa5c7298..0000000000
--- a/target/linux/ipq806x/patches-4.9/0020-qcom-ipq4019-enable-DMA-for-spi.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 4593e768393b9589f0a8987eaf57316c214865fe Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Mon, 11 Apr 2016 14:49:12 -0500
-Subject: [PATCH 20/69] qcom: ipq4019: enable DMA for spi
-
-These are the required nodes for spi-qup to use DMA
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -167,6 +167,8 @@
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
-+ dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-+ dma-names = "rx", "tx";
- status = "disabled";
- };
-
diff --git a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch b/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
deleted file mode 100644
index 8cd3e205d3..0000000000
--- a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From ec3e465ecf3f7dd26f2e22170e4c5f4b9979df5d Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Mon, 21 Mar 2016 15:55:21 -0500
-Subject: [PATCH 26/69] dts: ipq4019: Add support for IPQ4019 DK04 board
-
-This is pretty similiar to a DK01 but has a bit more IO. Some notable
-differences are listed below however they are not in the device tree yet
-as we continue adding more support
-
-- second serial port
-- PCIe
-- NAND
-- SD/EMMC
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 12 +-
- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 21 +++
- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 163 ++++++++++++++++++++++++
- 4 files changed, 189 insertions(+), 8 deletions(-)
- create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
- create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -617,6 +617,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
- qcom-ipq4019-ap.dk01.1-c1.dtb \
-+ qcom-ipq4019-ap.dk04.1-c1.dtb \
- qcom-ipq8064-ap148.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
-@@ -0,0 +1,22 @@
-+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ */
-+
-+#include "qcom-ipq4019-ap.dk04.1.dtsi"
-+
-+/ {
-+ model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
-+ compatible = "qcom,ap-dk04.1-c1", "qcom,ipq4019";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-@@ -0,0 +1,163 @@
-+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ */
-+
-+#include "qcom-ipq4019.dtsi"
-+
-+/ {
-+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
-+ compatible = "qcom,ipq4019";
-+
-+ clocks {
-+ xo: xo {
-+ compatible = "fixed-clock";
-+ clock-frequency = <48000000>;
-+ #clock-cells = <0>;
-+ };
-+ };
-+
-+ soc {
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <1 2 0xf08>,
-+ <1 3 0xf08>,
-+ <1 4 0xf08>,
-+ <1 1 0xf08>;
-+ clock-frequency = <48000000>;
-+ };
-+
-+ pinctrl@0x01000000 {
-+ serial_0_pins: serial_pinmux {
-+ mux {
-+ pins = "gpio16", "gpio17";
-+ function = "blsp_uart0";
-+ bias-disable;
-+ };
-+ };
-+
-+ serial_1_pins: serial1_pinmux {
-+ mux {
-+ pins = "gpio8", "gpio9";
-+ function = "blsp_uart1";
-+ bias-disable;
-+ };
-+ };
-+
-+ spi_0_pins: spi_0_pinmux {
-+ pinmux {
-+ function = "blsp_spi0";
-+ pins = "gpio13", "gpio14", "gpio15";
-+ };
-+ pinmux_cs {
-+ function = "gpio";
-+ pins = "gpio12";
-+ };
-+ pinconf {
-+ pins = "gpio13", "gpio14", "gpio15";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ pinconf_cs {
-+ pins = "gpio12";
-+ drive-strength = <2>;
-+ bias-disable;
-+ output-high;
-+ };
-+ };
-+
-+ i2c_0_pins: i2c_0_pinmux {
-+ pinmux {
-+ function = "blsp_i2c0";
-+ pins = "gpio10", "gpio11";
-+ };
-+ pinconf {
-+ pins = "gpio10", "gpio11";
-+ drive-strength = <16>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ blsp_dma: dma@7884000 {
-+ status = "ok";
-+ };
-+
-+ spi_0: spi@78b5000 {
-+ pinctrl-0 = <&spi_0_pins>;
-+ pinctrl-names = "default";
-+ status = "ok";
-+ cs-gpios = <&tlmm 12 0>;
-+
-+ mx25l25635e@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ reg = <0>;
-+ compatible = "mx25l25635e";
-+ spi-max-frequency = <24000000>;
-+ };
-+ };
-+
-+ i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
-+ pinctrl-0 = <&i2c_0_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "ok";
-+ };
-+
-+ serial@78af000 {
-+ pinctrl-0 = <&serial_0_pins>;
-+ pinctrl-names = "default";
-+ status = "ok";
-+ };
-+
-+ serial@78b0000 {
-+ pinctrl-0 = <&serial_1_pins>;
-+ pinctrl-names = "default";
-+ status = "ok";
-+ };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "ok";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "ok";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ status = "ok";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "ok";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ status = "ok";
-+ };
-+
-+ cryptobam: dma@8e04000 {
-+ status = "ok";
-+ };
-+
-+ crypto@8e3a000 {
-+ status = "ok";
-+ };
-+
-+ watchdog@b017000 {
-+ status = "ok";
-+ };
-+ };
-+};
diff --git a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
index 0f3b20ebe7..bac7c6da4f 100644
--- a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch
@@ -10,15 +10,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -616,9 +616,20 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8074-dragonboard.dtb \
- qcom-apq8084-ifc6540.dtb \
+@@ -618,6 +618,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8084-mtp.dtb \
-+ qcom-ipq4019-a42.dtb \
-+ qcom-ipq4019-gl-b1300.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
- qcom-ipq4019-ap.dk04.1-c1.dtb \
-+ qcom-ipq4019-fritz4040.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
diff --git a/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
deleted file mode 100644
index 40f5e407ba..0000000000
--- a/target/linux/ipq806x/patches-4.9/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 6a6c067b7ce2b3de4efbafddc134afbea3ddc1a3 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Fri, 8 Apr 2016 15:26:10 -0500
-Subject: [PATCH] qcom: ipq4019: use v2 of the kpss bringup mechanism
-
-v1 was the incorrect choice here and sometimes the board
-would not come up properly.
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
-Changes:
- - moved L2-Cache to be a subnode of cpu0
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++--------
- 1 file changed, 24 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -34,19 +34,27 @@
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
-- enable-method = "qcom,kpss-acc-v1";
-+ enable-method = "qcom,kpss-acc-v2";
-+ next-level-cache = <&L2>;
- qcom,acc = <&acc0>;
- qcom,saw = <&saw0>;
- reg = <0x0>;
- clocks = <&gcc GCC_APPS_CLK_SRC>;
- clock-frequency = <0>;
- operating-points-v2 = <&cpu0_opp_table>;
-+
-+ L2: l2-cache {
-+ compatible = "qcom,arch-cache";
-+ cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
-+ };
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
-- enable-method = "qcom,kpss-acc-v1";
-+ enable-method = "qcom,kpss-acc-v2";
-+ next-level-cache = <&L2>;
- qcom,acc = <&acc1>;
- qcom,saw = <&saw1>;
- reg = <0x1>;
-@@ -58,7 +66,8 @@
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
-- enable-method = "qcom,kpss-acc-v1";
-+ enable-method = "qcom,kpss-acc-v2";
-+ next-level-cache = <&L2>;
- qcom,acc = <&acc2>;
- qcom,saw = <&saw2>;
- reg = <0x2>;
-@@ -70,7 +79,8 @@
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
-- enable-method = "qcom,kpss-acc-v1";
-+ enable-method = "qcom,kpss-acc-v2";
-+ next-level-cache = <&L2>;
- qcom,acc = <&acc3>;
- qcom,saw = <&saw3>;
- reg = <0x3>;
-@@ -212,22 +222,22 @@
- };
-
- acc0: clock-controller@b088000 {
-- compatible = "qcom,kpss-acc-v1";
-+ compatible = "qcom,kpss-acc-v2";
- reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
- };
-
- acc1: clock-controller@b098000 {
-- compatible = "qcom,kpss-acc-v1";
-+ compatible = "qcom,kpss-acc-v2";
- reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
- };
-
- acc2: clock-controller@b0a8000 {
-- compatible = "qcom,kpss-acc-v1";
-+ compatible = "qcom,kpss-acc-v2";
- reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
- };
-
- acc3: clock-controller@b0b8000 {
-- compatible = "qcom,kpss-acc-v1";
-+ compatible = "qcom,kpss-acc-v2";
- reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
- };
-
-@@ -255,6 +265,12 @@
- regulator;
- };
-
-+ saw_l2: regulator@b012000 {
-+ compatible = "qcom,saw2";
-+ reg = <0xb012000 0x1000>;
-+ regulator;
-+ };
-+
- serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
deleted file mode 100644
index 3c3fc98a2d..0000000000
--- a/target/linux/ipq806x/patches-4.9/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From ea5f4d6f4716f3a0bb4fc3614b7a0e8c0df1cb81 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 17 Mar 2016 16:22:28 -0500
-Subject: [PATCH] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree
-
-This adds the SoC nodes to the ipq4019 device tree and
-enable it for the DK01.1 board.
-
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
-Changes:
- - replaced space with tab
- - added sleep and mock_utmi clocks
- - added registers for usb2 and usb3 parent node
- - changed compatible to qca,ipa4019-dwc3
- - updated usb2 and usb3 names
- (included the reg - in case they become necessary later)
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 71 +++++++++++++++++++++++++++
- 2 files changed, 91 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -108,5 +108,25 @@
- watchdog@b017000 {
- status = "ok";
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "ok";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "ok";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ status = "ok";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "ok";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ status = "ok";
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -307,5 +307,76 @@
- compatible = "qcom,pshold";
- reg = <0x4ab000 0x4>;
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ compatible = "qca,uni-ssphy";
-+ reg = <0x9a000 0x800>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-+ reset-names = "por_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ compatible = "qca,baldur-usb3-hsphy";
-+ reg = <0xa6000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3@8af8800 {
-+ compatible = "qca,ipq4019-dwc3";
-+ reg = <0x8af8800 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
-+ <&gcc GCC_USB3_SLEEP_CLK>,
-+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-+ clock-names = "master", "sleep", "mock_utmi";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@8a00000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x8a00000 0xf8000>;
-+ interrupts = <0 132 0>;
-+ usb-phy = <&usb3_hs_phy>, <&usb3_ss_phy>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ };
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ compatible = "qca,baldur-usb2-hsphy";
-+ reg = <0xa8000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb2@60f8800 {
-+ compatible = "qca,ipq4019-dwc3";
-+ reg = <0x60f8800 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
-+ <&gcc GCC_USB2_SLEEP_CLK>,
-+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-+ clock-names = "master", "sleep", "mock_utmi";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@6000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x6000000 0xf8000>;
-+ interrupts = <0 136 0>;
-+ usb-phy = <&usb2_hs_phy>;
-+ phy-names = "usb2-phy";
-+ dr_mode = "host";
-+ };
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch
deleted file mode 100644
index 4cbcc0aea2..0000000000
--- a/target/linux/ipq806x/patches-4.9/307-ARM-qcom-Add-IPQ4019-SoC-support.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 19 Nov 2016 00:58:18 +0100
-Subject: [PATCH] ARM: qcom: Add IPQ4019 SoC support
-
-Add support for the Qualcomm Atheros IPQ4019 SoC.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/Makefile | 1 +
- arch/arm/mach-qcom/Kconfig | 5 +++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -147,6 +147,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000
- endif
- textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
- textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
-+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
- textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
-
- # Machine directory name. This list is sorted alphanumerically
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -28,4 +28,9 @@ config ARCH_MDM9615
- bool "Enable support for MDM9615"
- select CLKSRC_QCOM
-
-+config ARCH_IPQ40XX
-+ bool "Enable support for IPQ40XX"
-+ select CLKSRC_QCOM
-+ select HAVE_ARM_ARCH_TIMER
-+
- endif
diff --git a/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch b/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch
deleted file mode 100644
index d12ca4befe..0000000000
--- a/target/linux/ipq806x/patches-4.9/308-dts-ipq4019-add-both-IPQ4019-wifi-block-definitions.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 6091a49b0b06bf838fed80498c4f5f40d0fbd447 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 19 Nov 2016 01:22:46 +0100
-Subject: [PATCH] dts: ipq4019: add both IPQ4019 wifi block definitions
-
-The IPQ4019 has two ath10k blocks on the AHB. Both wifi's
-are already supported by ath10k.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 84 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 84 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -378,5 +378,89 @@
- dr_mode = "host";
- };
- };
-+
-+ wifi0: wifi@a000000 {
-+ compatible = "qcom,ipq4019-wifi";
-+ reg = <0xa000000 0x200000>;
-+ resets = <&gcc WIFI0_CPU_INIT_RESET
-+ &gcc WIFI0_RADIO_SRIF_RESET
-+ &gcc WIFI0_RADIO_WARM_RESET
-+ &gcc WIFI0_RADIO_COLD_RESET
-+ &gcc WIFI0_CORE_WARM_RESET
-+ &gcc WIFI0_CORE_COLD_RESET>;
-+ reset-names = "wifi_cpu_init", "wifi_radio_srif",
-+ "wifi_radio_warm", "wifi_radio_cold",
-+ "wifi_core_warm", "wifi_core_cold";
-+ clocks = <&gcc GCC_WCSS2G_CLK
-+ &gcc GCC_WCSS2G_REF_CLK
-+ &gcc GCC_WCSS2G_RTC_CLK>;
-+ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
-+ "wifi_wcss_rtc";
-+ interrupts = <0 32 IRQ_TYPE_EDGE_RISING
-+ 0 33 IRQ_TYPE_EDGE_RISING
-+ 0 34 IRQ_TYPE_EDGE_RISING
-+ 0 35 IRQ_TYPE_EDGE_RISING
-+ 0 36 IRQ_TYPE_EDGE_RISING
-+ 0 37 IRQ_TYPE_EDGE_RISING
-+ 0 38 IRQ_TYPE_EDGE_RISING
-+ 0 39 IRQ_TYPE_EDGE_RISING
-+ 0 40 IRQ_TYPE_EDGE_RISING
-+ 0 41 IRQ_TYPE_EDGE_RISING
-+ 0 42 IRQ_TYPE_EDGE_RISING
-+ 0 43 IRQ_TYPE_EDGE_RISING
-+ 0 44 IRQ_TYPE_EDGE_RISING
-+ 0 45 IRQ_TYPE_EDGE_RISING
-+ 0 46 IRQ_TYPE_EDGE_RISING
-+ 0 47 IRQ_TYPE_EDGE_RISING
-+ 0 168 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
-+ "msi4", "msi5", "msi6", "msi7",
-+ "msi8", "msi9", "msi10", "msi11",
-+ "msi12", "msi13", "msi14", "msi15",
-+ "legacy";
-+ status = "disabled";
-+ };
-+
-+ wifi1: wifi@a800000 {
-+ compatible = "qcom,ipq4019-wifi";
-+ reg = <0xa800000 0x200000>;
-+ resets = <&gcc WIFI1_CPU_INIT_RESET
-+ &gcc WIFI1_RADIO_SRIF_RESET
-+ &gcc WIFI1_RADIO_WARM_RESET
-+ &gcc WIFI1_RADIO_COLD_RESET
-+ &gcc WIFI1_CORE_WARM_RESET
-+ &gcc WIFI1_CORE_COLD_RESET>;
-+ reset-names = "wifi_cpu_init", "wifi_radio_srif",
-+ "wifi_radio_warm", "wifi_radio_cold",
-+ "wifi_core_warm", "wifi_core_cold";
-+ clocks = <&gcc GCC_WCSS5G_CLK
-+ &gcc GCC_WCSS5G_REF_CLK
-+ &gcc GCC_WCSS5G_RTC_CLK>;
-+ clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
-+ "wifi_wcss_rtc";
-+ interrupts = <0 48 IRQ_TYPE_EDGE_RISING
-+ 0 49 IRQ_TYPE_EDGE_RISING
-+ 0 50 IRQ_TYPE_EDGE_RISING
-+ 0 51 IRQ_TYPE_EDGE_RISING
-+ 0 52 IRQ_TYPE_EDGE_RISING
-+ 0 53 IRQ_TYPE_EDGE_RISING
-+ 0 54 IRQ_TYPE_EDGE_RISING
-+ 0 55 IRQ_TYPE_EDGE_RISING
-+ 0 56 IRQ_TYPE_EDGE_RISING
-+ 0 57 IRQ_TYPE_EDGE_RISING
-+ 0 58 IRQ_TYPE_EDGE_RISING
-+ 0 59 IRQ_TYPE_EDGE_RISING
-+ 0 60 IRQ_TYPE_EDGE_RISING
-+ 0 61 IRQ_TYPE_EDGE_RISING
-+ 0 62 IRQ_TYPE_EDGE_RISING
-+ 0 63 IRQ_TYPE_EDGE_RISING
-+ 0 169 IRQ_TYPE_NONE>;
-+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
-+ "msi4", "msi5", "msi6", "msi7",
-+ "msi8", "msi9", "msi10", "msi11",
-+ "msi12", "msi13", "msi14", "msi15",
-+ "legacy";
-+ status = "disabled";
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch b/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch
deleted file mode 100644
index abcbb6ee55..0000000000
--- a/target/linux/ipq806x/patches-4.9/309-dts-ipq4019-add-pseudo-random-number-generator.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 26fa6fdc627b523277c7a79907233596b2f8a3ef Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 19 Nov 2016 03:29:04 +0100
-Subject: [PATCH] dts: ipq4019: add pseudo random number generator
-
-This architecture has a pseudo random number generator
-supported by the existing "qcom,prng" binding.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -271,6 +271,13 @@
- regulator;
- };
-
-+ rng@22000 {
-+ compatible = "qcom,prng";
-+ reg = <0x22000 0x140>;
-+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
-+ clock-names = "core";
-+ };
-+
- serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
deleted file mode 100644
index d2721875a2..0000000000
--- a/target/linux/ipq806x/patches-4.9/605-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
-From: Rakesh Nair <ranair@codeaurora.org>
-Date: Wed, 20 Jul 2016 15:02:01 +0530
-Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
- netdev_ops
-
-Add callback support to get default vlan tag and register
-receive flow steering filter.
-
-Used by IPQ4019 ess-edma driver.
-
-BUG=chrome-os-partner:33096
-TEST=none
-
-Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
-Signed-off-by: Rakesh Nair <ranair@codeaurora.org>
-Reviewed-on: https://chromium-review.googlesource.com/362203
-Commit-Ready: Grant Grundler <grundler@chromium.org>
-Tested-by: Grant Grundler <grundler@chromium.org>
-Reviewed-by: Grant Grundler <grundler@chromium.org>
----
- include/linux/netdevice.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -725,6 +725,16 @@ struct xps_map {
- #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- - sizeof(struct xps_map)) / sizeof(u16))
-
-+#ifdef CONFIG_RFS_ACCEL
-+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
-+ __be32 src,
-+ __be32 dst,
-+ __be16 sport,
-+ __be16 dport,
-+ u8 proto,
-+ u16 rxq_index,
-+ u32 action);
-+#endif
- /*
- * This structure holds all XPS maps for device. Maps are indexed by CPU.
- */
-@@ -1251,6 +1261,9 @@ struct net_device_ops {
- const struct sk_buff *skb,
- u16 rxq_index,
- u32 flow_id);
-+ int (*ndo_register_rfs_filter)(struct net_device *dev,
-+ set_rfs_filter_callback_t set_filter);
-+ int (*ndo_get_default_vlan_tag)(struct net_device *net);
- #endif
- int (*ndo_add_slave)(struct net_device *dev,
- struct net_device *slave_dev);
diff --git a/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch b/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch
deleted file mode 100644
index 003524312c..0000000000
--- a/target/linux/ipq806x/patches-4.9/700-net-add-qualcomm-mdio-and-phy.patch
+++ /dev/null
@@ -1,2690 +0,0 @@
-From 5a71a2005a2e1e6bbe36f00386c495ad6626beb2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 19 Jan 2017 01:59:43 +0100
-Subject: [PATCH 30/38] NET: add qualcomm mdio and PHY
-
----
- drivers/net/phy/Kconfig | 14 ++++++++++++++
- drivers/net/phy/Makefile | 2 ++
- 2 files changed, 16 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -408,6 +408,20 @@ config XILINX_GMII2RGMII
- the Reduced Gigabit Media Independent Interface(RGMII) between
- Ethernet physical media devices and the Gigabit Ethernet controller.
-
-+config MDIO_IPQ40XX
-+ tristate "Qualcomm Atheros ipq40xx MDIO interface"
-+ depends on HAS_IOMEM && OF
-+ ---help---
-+ This driver supports the MDIO interface found in Qualcomm
-+ Atheros ipq40xx Soc chip.
-+
-+config AR40XX_PHY
-+ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
-+ depends on HAS_IOMEM && OF
-+ select SWCONFIG
-+ ---help---
-+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
-+
- endif # PHYLIB
-
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += md
- obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
- obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
-+obj-$(CONFIG_MDIO_IPQ40XX) += mdio-ipq40xx.o
- obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
- obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
- obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
-@@ -40,6 +41,7 @@ obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
-
- obj-$(CONFIG_AMD_PHY) += amd.o
- obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
-+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o
- obj-$(CONFIG_AT803X_PHY) += at803x.o
- obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
- obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
---- /dev/null
-+++ b/drivers/net/phy/ar40xx.c
-@@ -0,0 +1,2090 @@
-+/*
-+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/list.h>
-+#include <linux/bitops.h>
-+#include <linux/switch.h>
-+#include <linux/delay.h>
-+#include <linux/phy.h>
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/lockdep.h>
-+#include <linux/workqueue.h>
-+#include <linux/of_device.h>
-+#include <linux/of_address.h>
-+#include <linux/mdio.h>
-+#include <linux/gpio.h>
-+
-+#include "ar40xx.h"
-+
-+static struct ar40xx_priv *ar40xx_priv;
-+
-+#define MIB_DESC(_s , _o, _n) \
-+ { \
-+ .size = (_s), \
-+ .offset = (_o), \
-+ .name = (_n), \
-+ }
-+
-+static const struct ar40xx_mib_desc ar40xx_mibs[] = {
-+ MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"),
-+ MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"),
-+ MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"),
-+ MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"),
-+ MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"),
-+ MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"),
-+ MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"),
-+ MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"),
-+ MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"),
-+ MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"),
-+ MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"),
-+ MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"),
-+ MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"),
-+ MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"),
-+ MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"),
-+ MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"),
-+ MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"),
-+ MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"),
-+ MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"),
-+ MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"),
-+ MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"),
-+ MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"),
-+ MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"),
-+ MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"),
-+ MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"),
-+ MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"),
-+ MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"),
-+ MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"),
-+ MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"),
-+ MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"),
-+ MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"),
-+ MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"),
-+ MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"),
-+ MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"),
-+ MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"),
-+ MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"),
-+ MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"),
-+ MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"),
-+ MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"),
-+};
-+
-+static u32
-+ar40xx_read(struct ar40xx_priv *priv, int reg)
-+{
-+ return readl(priv->hw_addr + reg);
-+}
-+
-+static u32
-+ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg)
-+{
-+ return readl(priv->psgmii_hw_addr + reg);
-+}
-+
-+static void
-+ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val)
-+{
-+ writel(val, priv->hw_addr + reg);
-+}
-+
-+static u32
-+ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar40xx_read(priv, reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar40xx_write(priv, reg, ret);
-+ return ret;
-+}
-+
-+static void
-+ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val)
-+{
-+ writel(val, priv->psgmii_hw_addr + reg);
-+}
-+
-+static void
-+ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr,
-+ u16 dbg_addr, u16 dbg_data)
-+{
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ mutex_lock(&bus->mdio_lock);
-+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
-+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data);
-+ mutex_unlock(&bus->mdio_lock);
-+}
-+
-+static void
-+ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr,
-+ u16 dbg_addr, u16 *dbg_data)
-+{
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ mutex_lock(&bus->mdio_lock);
-+ bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
-+ *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA);
-+ mutex_unlock(&bus->mdio_lock);
-+}
-+
-+static void
-+ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id,
-+ u16 mmd_num, u16 reg_id, u16 reg_val)
-+{
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ mutex_lock(&bus->mdio_lock);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_ADDR, mmd_num);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_DATA, reg_id);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_ADDR,
-+ 0x4000 | mmd_num);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_DATA, reg_val);
-+ mutex_unlock(&bus->mdio_lock);
-+}
-+
-+static u16
-+ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id,
-+ u16 mmd_num, u16 reg_id)
-+{
-+ u16 value;
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ mutex_lock(&bus->mdio_lock);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_ADDR, mmd_num);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_DATA, reg_id);
-+ bus->write(bus, phy_id,
-+ AR40XX_MII_ATH_MMD_ADDR,
-+ 0x4000 | mmd_num);
-+ value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA);
-+ mutex_unlock(&bus->mdio_lock);
-+ return value;
-+}
-+
-+/* Start of swconfig support */
-+
-+static void
-+ar40xx_phy_poll_reset(struct ar40xx_priv *priv)
-+{
-+ u32 i, in_reset, retries = 500;
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ /* Assume RESET was recently issued to some or all of the phys */
-+ in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0);
-+
-+ while (retries--) {
-+ /* 1ms should be plenty of time.
-+ * 802.3 spec allows for a max wait time of 500ms
-+ */
-+ usleep_range(1000, 2000);
-+
-+ for (i = 0; i < AR40XX_NUM_PHYS; i++) {
-+ int val;
-+
-+ /* skip devices which have completed reset */
-+ if (!(in_reset & BIT(i)))
-+ continue;
-+
-+ val = mdiobus_read(bus, i, MII_BMCR);
-+ if (val < 0)
-+ continue;
-+
-+ /* mark when phy is no longer in reset state */
-+ if (!(val & BMCR_RESET))
-+ in_reset &= ~BIT(i);
-+ }
-+
-+ if (!in_reset)
-+ return;
-+ }
-+
-+ dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n",
-+ in_reset);
-+}
-+
-+static void
-+ar40xx_phy_init(struct ar40xx_priv *priv)
-+{
-+ int i;
-+ struct mii_bus *bus;
-+ u16 val;
-+
-+ bus = priv->mii_bus;
-+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
-+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
-+ val &= ~AR40XX_PHY_MANU_CTRL_EN;
-+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
-+ mdiobus_write(bus, i,
-+ MII_ADVERTISE, ADVERTISE_ALL |
-+ ADVERTISE_PAUSE_CAP |
-+ ADVERTISE_PAUSE_ASYM);
-+ mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
-+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+ }
-+
-+ ar40xx_phy_poll_reset(priv);
-+}
-+
-+static void
-+ar40xx_port_phy_linkdown(struct ar40xx_priv *priv)
-+{
-+ struct mii_bus *bus;
-+ int i;
-+ u16 val;
-+
-+ bus = priv->mii_bus;
-+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
-+ mdiobus_write(bus, i, MII_CTRL1000, 0);
-+ mdiobus_write(bus, i, MII_ADVERTISE, 0);
-+ mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
-+ val |= AR40XX_PHY_MANU_CTRL_EN;
-+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
-+ /* disable transmit */
-+ ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val);
-+ val &= 0xf00f;
-+ ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val);
-+ }
-+}
-+
-+static void
-+ar40xx_set_mirror_regs(struct ar40xx_priv *priv)
-+{
-+ int port;
-+
-+ /* reset all mirror registers */
-+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
-+ AR40XX_FWD_CTRL0_MIRROR_PORT,
-+ (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
-+ for (port = 0; port < AR40XX_NUM_PORTS; port++) {
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port),
-+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0);
-+
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port),
-+ AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0);
-+ }
-+
-+ /* now enable mirroring if necessary */
-+ if (priv->source_port >= AR40XX_NUM_PORTS ||
-+ priv->monitor_port >= AR40XX_NUM_PORTS ||
-+ priv->source_port == priv->monitor_port) {
-+ return;
-+ }
-+
-+ ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
-+ AR40XX_FWD_CTRL0_MIRROR_PORT,
-+ (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
-+
-+ if (priv->mirror_rx)
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0,
-+ AR40XX_PORT_LOOKUP_ING_MIRROR_EN);
-+
-+ if (priv->mirror_tx)
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port),
-+ 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN);
-+}
-+
-+static int
-+ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ u8 ports = priv->vlan_table[val->port_vlan];
-+ int i;
-+
-+ val->len = 0;
-+ for (i = 0; i < dev->ports; i++) {
-+ struct switch_port *p;
-+
-+ if (!(ports & BIT(i)))
-+ continue;
-+
-+ p = &val->value.ports[val->len++];
-+ p->id = i;
-+ if ((priv->vlan_tagged & BIT(i)) ||
-+ (priv->pvid[i] != val->port_vlan))
-+ p->flags = BIT(SWITCH_PORT_FLAG_TAGGED);
-+ else
-+ p->flags = 0;
-+ }
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ u8 *vt = &priv->vlan_table[val->port_vlan];
-+ int i;
-+
-+ *vt = 0;
-+ for (i = 0; i < val->len; i++) {
-+ struct switch_port *p = &val->value.ports[i];
-+
-+ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) {
-+ if (val->port_vlan == priv->pvid[p->id])
-+ priv->vlan_tagged |= BIT(p->id);
-+ } else {
-+ priv->vlan_tagged &= ~BIT(p->id);
-+ priv->pvid[p->id] = val->port_vlan;
-+ }
-+
-+ *vt |= BIT(p->id);
-+ }
-+ return 0;
-+}
-+
-+static int
-+ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val,
-+ unsigned timeout)
-+{
-+ int i;
-+
-+ for (i = 0; i < timeout; i++) {
-+ u32 t;
-+
-+ t = ar40xx_read(priv, reg);
-+ if ((t & mask) == val)
-+ return 0;
-+
-+ usleep_range(1000, 2000);
-+ }
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int
-+ar40xx_mib_op(struct ar40xx_priv *priv, u32 op)
-+{
-+ int ret;
-+
-+ lockdep_assert_held(&priv->mib_lock);
-+
-+ /* Capture the hardware statistics for all ports */
-+ ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC,
-+ AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S));
-+
-+ /* Wait for the capturing to complete. */
-+ ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC,
-+ AR40XX_MIB_BUSY, 0, 10);
-+
-+ return ret;
-+}
-+
-+static void
-+ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush)
-+{
-+ unsigned int base;
-+ u64 *mib_stats;
-+ int i;
-+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+
-+ WARN_ON(port >= priv->dev.ports);
-+
-+ lockdep_assert_held(&priv->mib_lock);
-+
-+ base = AR40XX_REG_PORT_STATS_START +
-+ AR40XX_REG_PORT_STATS_LEN * port;
-+
-+ mib_stats = &priv->mib_stats[port * num_mibs];
-+ if (flush) {
-+ u32 len;
-+
-+ len = num_mibs * sizeof(*mib_stats);
-+ memset(mib_stats, 0, len);
-+ return;
-+ }
-+ for (i = 0; i < num_mibs; i++) {
-+ const struct ar40xx_mib_desc *mib;
-+ u64 t;
-+
-+ mib = &ar40xx_mibs[i];
-+ t = ar40xx_read(priv, base + mib->offset);
-+ if (mib->size == 2) {
-+ u64 hi;
-+
-+ hi = ar40xx_read(priv, base + mib->offset + 4);
-+ t |= hi << 32;
-+ }
-+
-+ mib_stats[i] += t;
-+ }
-+}
-+
-+static int
-+ar40xx_mib_capture(struct ar40xx_priv *priv)
-+{
-+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE);
-+}
-+
-+static int
-+ar40xx_mib_flush(struct ar40xx_priv *priv)
-+{
-+ return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH);
-+}
-+
-+static int
-+ar40xx_sw_set_reset_mibs(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ unsigned int len;
-+ int ret;
-+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+
-+ mutex_lock(&priv->mib_lock);
-+
-+ len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats);
-+ memset(priv->mib_stats, 0, len);
-+ ret = ar40xx_mib_flush(priv);
-+
-+ mutex_unlock(&priv->mib_lock);
-+ return ret;
-+}
-+
-+static int
-+ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ priv->vlan = !!val->value.i;
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ val->value.i = priv->vlan;
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ priv->mirror_rx = !!val->value.i;
-+ ar40xx_set_mirror_regs(priv);
-+ mutex_unlock(&priv->reg_mutex);
-+
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ val->value.i = priv->mirror_rx;
-+ mutex_unlock(&priv->reg_mutex);
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ priv->mirror_tx = !!val->value.i;
-+ ar40xx_set_mirror_regs(priv);
-+ mutex_unlock(&priv->reg_mutex);
-+
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ val->value.i = priv->mirror_tx;
-+ mutex_unlock(&priv->reg_mutex);
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ priv->monitor_port = val->value.i;
-+ ar40xx_set_mirror_regs(priv);
-+ mutex_unlock(&priv->reg_mutex);
-+
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ val->value.i = priv->monitor_port;
-+ mutex_unlock(&priv->reg_mutex);
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_mirror_source_port(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ priv->source_port = val->value.i;
-+ ar40xx_set_mirror_regs(priv);
-+ mutex_unlock(&priv->reg_mutex);
-+
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_mirror_source_port(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ mutex_lock(&priv->reg_mutex);
-+ val->value.i = priv->source_port;
-+ mutex_unlock(&priv->reg_mutex);
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_linkdown(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ if (val->value.i == 1)
-+ ar40xx_port_phy_linkdown(priv);
-+ else
-+ ar40xx_phy_init(priv);
-+
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_port_reset_mib(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ int port;
-+ int ret;
-+
-+ port = val->port_vlan;
-+ if (port >= dev->ports)
-+ return -EINVAL;
-+
-+ mutex_lock(&priv->mib_lock);
-+ ret = ar40xx_mib_capture(priv);
-+ if (ret)
-+ goto unlock;
-+
-+ ar40xx_mib_fetch_port_stat(priv, port, true);
-+
-+unlock:
-+ mutex_unlock(&priv->mib_lock);
-+ return ret;
-+}
-+
-+static int
-+ar40xx_sw_get_port_mib(struct switch_dev *dev,
-+ const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ u64 *mib_stats;
-+ int port;
-+ int ret;
-+ char *buf = priv->buf;
-+ int i, len = 0;
-+ u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+
-+ port = val->port_vlan;
-+ if (port >= dev->ports)
-+ return -EINVAL;
-+
-+ mutex_lock(&priv->mib_lock);
-+ ret = ar40xx_mib_capture(priv);
-+ if (ret)
-+ goto unlock;
-+
-+ ar40xx_mib_fetch_port_stat(priv, port, false);
-+
-+ len += snprintf(buf + len, sizeof(priv->buf) - len,
-+ "Port %d MIB counters\n",
-+ port);
-+
-+ mib_stats = &priv->mib_stats[port * num_mibs];
-+ for (i = 0; i < num_mibs; i++)
-+ len += snprintf(buf + len, sizeof(priv->buf) - len,
-+ "%-12s: %llu\n",
-+ ar40xx_mibs[i].name,
-+ mib_stats[i]);
-+
-+ val->value.s = buf;
-+ val->len = len;
-+
-+unlock:
-+ mutex_unlock(&priv->mib_lock);
-+ return ret;
-+}
-+
-+static int
-+ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ priv->vlan_id[val->port_vlan] = val->value.i;
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
-+ struct switch_val *val)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ val->value.i = priv->vlan_id[val->port_vlan];
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ *vlan = priv->pvid[port];
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ /* make sure no invalid PVIDs get set */
-+ if (vlan >= dev->vlans)
-+ return -EINVAL;
-+
-+ priv->pvid[port] = vlan;
-+ return 0;
-+}
-+
-+static void
-+ar40xx_read_port_link(struct ar40xx_priv *priv, int port,
-+ struct switch_port_link *link)
-+{
-+ u32 status;
-+ u32 speed;
-+
-+ memset(link, 0, sizeof(*link));
-+
-+ status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port));
-+
-+ link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN);
-+ if (link->aneg || (port != AR40XX_PORT_CPU))
-+ link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP);
-+ else
-+ link->link = true;
-+
-+ if (!link->link)
-+ return;
-+
-+ link->duplex = !!(status & AR40XX_PORT_DUPLEX);
-+ link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW);
-+ link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW);
-+
-+ speed = (status & AR40XX_PORT_SPEED) >>
-+ AR40XX_PORT_STATUS_SPEED_S;
-+
-+ switch (speed) {
-+ case AR40XX_PORT_SPEED_10M:
-+ link->speed = SWITCH_PORT_SPEED_10;
-+ break;
-+ case AR40XX_PORT_SPEED_100M:
-+ link->speed = SWITCH_PORT_SPEED_100;
-+ break;
-+ case AR40XX_PORT_SPEED_1000M:
-+ link->speed = SWITCH_PORT_SPEED_1000;
-+ break;
-+ default:
-+ link->speed = SWITCH_PORT_SPEED_UNKNOWN;
-+ break;
-+ }
-+}
-+
-+static int
-+ar40xx_sw_get_port_link(struct switch_dev *dev, int port,
-+ struct switch_port_link *link)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+
-+ ar40xx_read_port_link(priv, port, link);
-+ return 0;
-+}
-+
-+static const struct switch_attr ar40xx_sw_attr_globals[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_vlan",
-+ .description = "Enable VLAN mode",
-+ .set = ar40xx_sw_set_vlan,
-+ .get = ar40xx_sw_get_vlan,
-+ .max = 1
-+ },
-+ {
-+ .type = SWITCH_TYPE_NOVAL,
-+ .name = "reset_mibs",
-+ .description = "Reset all MIB counters",
-+ .set = ar40xx_sw_set_reset_mibs,
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_mirror_rx",
-+ .description = "Enable mirroring of RX packets",
-+ .set = ar40xx_sw_set_mirror_rx_enable,
-+ .get = ar40xx_sw_get_mirror_rx_enable,
-+ .max = 1
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "enable_mirror_tx",
-+ .description = "Enable mirroring of TX packets",
-+ .set = ar40xx_sw_set_mirror_tx_enable,
-+ .get = ar40xx_sw_get_mirror_tx_enable,
-+ .max = 1
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "mirror_monitor_port",
-+ .description = "Mirror monitor port",
-+ .set = ar40xx_sw_set_mirror_monitor_port,
-+ .get = ar40xx_sw_get_mirror_monitor_port,
-+ .max = AR40XX_NUM_PORTS - 1
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "mirror_source_port",
-+ .description = "Mirror source port",
-+ .set = ar40xx_sw_set_mirror_source_port,
-+ .get = ar40xx_sw_get_mirror_source_port,
-+ .max = AR40XX_NUM_PORTS - 1
-+ },
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "linkdown",
-+ .description = "Link down all the PHYs",
-+ .set = ar40xx_sw_set_linkdown,
-+ .max = 1
-+ },
-+};
-+
-+static const struct switch_attr ar40xx_sw_attr_port[] = {
-+ {
-+ .type = SWITCH_TYPE_NOVAL,
-+ .name = "reset_mib",
-+ .description = "Reset single port MIB counters",
-+ .set = ar40xx_sw_set_port_reset_mib,
-+ },
-+ {
-+ .type = SWITCH_TYPE_STRING,
-+ .name = "mib",
-+ .description = "Get port's MIB counters",
-+ .set = NULL,
-+ .get = ar40xx_sw_get_port_mib,
-+ },
-+};
-+
-+const struct switch_attr ar40xx_sw_attr_vlan[] = {
-+ {
-+ .type = SWITCH_TYPE_INT,
-+ .name = "vid",
-+ .description = "VLAN ID (0-4094)",
-+ .set = ar40xx_sw_set_vid,
-+ .get = ar40xx_sw_get_vid,
-+ .max = 4094,
-+ },
-+};
-+
-+/* End of swconfig support */
-+
-+static int
-+ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-+{
-+ int timeout = 20;
-+ u32 t;
-+
-+ while (1) {
-+ t = ar40xx_read(priv, reg);
-+ if ((t & mask) == val)
-+ return 0;
-+
-+ if (timeout-- <= 0)
-+ break;
-+
-+ usleep_range(10, 20);
-+ }
-+
-+ pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n",
-+ (unsigned int)reg, t, mask, val);
-+ return -ETIMEDOUT;
-+}
-+
-+static int
-+ar40xx_atu_flush(struct ar40xx_priv *priv)
-+{
-+ int ret;
-+
-+ ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC,
-+ AR40XX_ATU_FUNC_BUSY, 0);
-+ if (!ret)
-+ ar40xx_write(priv, AR40XX_REG_ATU_FUNC,
-+ AR40XX_ATU_FUNC_OP_FLUSH |
-+ AR40XX_ATU_FUNC_BUSY);
-+
-+ return ret;
-+}
-+
-+static void
-+ar40xx_ess_reset(struct ar40xx_priv *priv)
-+{
-+ reset_control_assert(priv->ess_rst);
-+ mdelay(10);
-+ reset_control_deassert(priv->ess_rst);
-+ /* Waiting for all inner tables init done.
-+ * It cost 5~10ms.
-+ */
-+ mdelay(10);
-+
-+ pr_info("ESS reset ok!\n");
-+}
-+
-+/* Start of psgmii self test */
-+
-+static void
-+ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
-+{
-+ u32 n;
-+ struct mii_bus *bus = priv->mii_bus;
-+ /* reset phy psgmii */
-+ /* fix phy psgmii RX 20bit */
-+ mdiobus_write(bus, 5, 0x0, 0x005b);
-+ /* reset phy psgmii */
-+ mdiobus_write(bus, 5, 0x0, 0x001b);
-+ /* release reset phy psgmii */
-+ mdiobus_write(bus, 5, 0x0, 0x005b);
-+
-+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
-+ u16 status;
-+
-+ status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28);
-+ if (status & BIT(0))
-+ break;
-+ /* Polling interval to check PSGMII PLL in malibu is ready
-+ * the worst time is 8.67ms
-+ * for 25MHz reference clock
-+ * [512+(128+2048)*49]*80ns+100us
-+ */
-+ mdelay(2);
-+ }
-+
-+ /*check malibu psgmii calibration done end..*/
-+
-+ /*freeze phy psgmii RX CDR*/
-+ mdiobus_write(bus, 5, 0x1a, 0x2230);
-+
-+ ar40xx_ess_reset(priv);
-+
-+ /*check psgmii calibration done start*/
-+ for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
-+ u32 status;
-+
-+ status = ar40xx_psgmii_read(priv, 0xa0);
-+ if (status & BIT(0))
-+ break;
-+ /* Polling interval to check PSGMII PLL in ESS is ready */
-+ mdelay(2);
-+ }
-+
-+ /* check dakota psgmii calibration done end..*/
-+
-+ /* relesae phy psgmii RX CDR */
-+ mdiobus_write(bus, 5, 0x1a, 0x3230);
-+ /* release phy psgmii RX 20bit */
-+ mdiobus_write(bus, 5, 0x0, 0x005f);
-+}
-+
-+static void
-+ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy)
-+{
-+ int j;
-+ u32 tx_ok, tx_error;
-+ u32 rx_ok, rx_error;
-+ u32 tx_ok_high16;
-+ u32 rx_ok_high16;
-+ u32 tx_all_ok, rx_all_ok;
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ mdiobus_write(bus, phy, 0x0, 0x9000);
-+ mdiobus_write(bus, phy, 0x0, 0x4140);
-+
-+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
-+ u16 status;
-+
-+ status = mdiobus_read(bus, phy, 0x11);
-+ if (status & AR40XX_PHY_SPEC_STATUS_LINK)
-+ break;
-+ /* the polling interval to check if the PHY link up or not
-+ * maxwait_timer: 750 ms +/-10 ms
-+ * minwait_timer : 1 us +/- 0.1us
-+ * time resides in minwait_timer ~ maxwait_timer
-+ * see IEEE 802.3 section 40.4.5.2
-+ */
-+ mdelay(8);
-+ }
-+
-+ /* enable check */
-+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000);
-+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003);
-+
-+ /* start traffic */
-+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000);
-+ /* wait for all traffic end
-+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
-+ */
-+ mdelay(50);
-+
-+ /* check counter */
-+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
-+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
-+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
-+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
-+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
-+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
-+ tx_all_ok = tx_ok + (tx_ok_high16 << 16);
-+ rx_all_ok = rx_ok + (rx_ok_high16 << 16);
-+ if (tx_all_ok == 0x1000 && tx_error == 0) {
-+ /* success */
-+ priv->phy_t_status &= (~BIT(phy));
-+ } else {
-+ pr_info("PHY %d single test PSGMII issue happen!\n", phy);
-+ priv->phy_t_status |= BIT(phy);
-+ }
-+
-+ mdiobus_write(bus, phy, 0x0, 0x1840);
-+}
-+
-+static void
-+ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv)
-+{
-+ int phy, j;
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ mdiobus_write(bus, 0x1f, 0x0, 0x9000);
-+ mdiobus_write(bus, 0x1f, 0x0, 0x4140);
-+
-+ for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
-+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+ u16 status;
-+
-+ status = mdiobus_read(bus, phy, 0x11);
-+ if (!(status & BIT(10)))
-+ break;
-+ }
-+
-+ if (phy >= (AR40XX_NUM_PORTS - 1))
-+ break;
-+ /* The polling interva to check if the PHY link up or not */
-+ mdelay(8);
-+ }
-+ /* enable check */
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000);
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003);
-+
-+ /* start traffic */
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000);
-+ /* wait for all traffic end
-+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
-+ */
-+ mdelay(50);
-+
-+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+ u32 tx_ok, tx_error;
-+ u32 rx_ok, rx_error;
-+ u32 tx_ok_high16;
-+ u32 rx_ok_high16;
-+ u32 tx_all_ok, rx_all_ok;
-+
-+ /* check counter */
-+ tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
-+ tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
-+ tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
-+ rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
-+ rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
-+ rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
-+ tx_all_ok = tx_ok + (tx_ok_high16<<16);
-+ rx_all_ok = rx_ok + (rx_ok_high16<<16);
-+ if (tx_all_ok == 0x1000 && tx_error == 0) {
-+ /* success */
-+ priv->phy_t_status &= ~BIT(phy + 8);
-+ } else {
-+ pr_info("PHY%d test see issue!\n", phy);
-+ priv->phy_t_status |= BIT(phy + 8);
-+ }
-+ }
-+
-+ pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status);
-+}
-+
-+void
-+ar40xx_psgmii_self_test(struct ar40xx_priv *priv)
-+{
-+ u32 i, phy;
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ ar40xx_malibu_psgmii_ess_reset(priv);
-+
-+ /* switch to access MII reg for copper */
-+ mdiobus_write(bus, 4, 0x1f, 0x8500);
-+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+ /*enable phy mdio broadcast write*/
-+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f);
-+ }
-+ /* force no link by power down */
-+ mdiobus_write(bus, 0x1f, 0x0, 0x1840);
-+ /*packet number*/
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000);
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0);
-+
-+ /*fix mdi status */
-+ mdiobus_write(bus, 0x1f, 0x10, 0x6800);
-+ for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) {
-+ priv->phy_t_status = 0;
-+
-+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
-+ AR40XX_PORT_LOOKUP_LOOPBACK,
-+ AR40XX_PORT_LOOKUP_LOOPBACK);
-+ }
-+
-+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++)
-+ ar40xx_psgmii_single_phy_testing(priv, phy);
-+
-+ ar40xx_psgmii_all_phy_testing(priv);
-+
-+ if (priv->phy_t_status)
-+ ar40xx_malibu_psgmii_ess_reset(priv);
-+ else
-+ break;
-+ }
-+
-+ if (i >= AR40XX_PSGMII_CALB_NUM)
-+ pr_info("PSGMII cannot recover\n");
-+ else
-+ pr_debug("PSGMII recovered after %d times reset\n", i);
-+
-+ /* configuration recover */
-+ /* packet number */
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0);
-+ /* disable check */
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0);
-+ /* disable traffic */
-+ ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0);
-+}
-+
-+void
-+ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv)
-+{
-+ int phy;
-+ struct mii_bus *bus = priv->mii_bus;
-+
-+ /* disable phy internal loopback */
-+ mdiobus_write(bus, 0x1f, 0x10, 0x6860);
-+ mdiobus_write(bus, 0x1f, 0x0, 0x9040);
-+
-+ for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
-+ /* disable mac loop back */
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
-+ AR40XX_PORT_LOOKUP_LOOPBACK, 0);
-+ /* disable phy mdio broadcast write */
-+ ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f);
-+ }
-+
-+ /* clear fdb entry */
-+ ar40xx_atu_flush(priv);
-+}
-+
-+/* End of psgmii self test */
-+
-+static void
-+ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode)
-+{
-+ if (mode == PORT_WRAPPER_PSGMII) {
-+ ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200);
-+ ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380);
-+ }
-+}
-+
-+static
-+int ar40xx_cpuport_setup(struct ar40xx_priv *priv)
-+{
-+ u32 t;
-+
-+ t = AR40XX_PORT_STATUS_TXFLOW |
-+ AR40XX_PORT_STATUS_RXFLOW |
-+ AR40XX_PORT_TXHALF_FLOW |
-+ AR40XX_PORT_DUPLEX |
-+ AR40XX_PORT_SPEED_1000M;
-+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
-+ usleep_range(10, 20);
-+
-+ t |= AR40XX_PORT_TX_EN |
-+ AR40XX_PORT_RX_EN;
-+ ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
-+
-+ return 0;
-+}
-+
-+static void
-+ar40xx_init_port(struct ar40xx_priv *priv, int port)
-+{
-+ u32 t;
-+
-+ ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port),
-+ AR40XX_PORT_AUTO_LINK_EN, 0);
-+
-+ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
-+
-+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
-+
-+ t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S;
-+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-+
-+ t = AR40XX_PORT_LOOKUP_LEARN;
-+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
-+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-+}
-+
-+void
-+ar40xx_init_globals(struct ar40xx_priv *priv)
-+{
-+ u32 t;
-+
-+ /* enable CPU port and disable mirror port */
-+ t = AR40XX_FWD_CTRL0_CPU_PORT_EN |
-+ AR40XX_FWD_CTRL0_MIRROR_PORT;
-+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t);
-+
-+ /* forward multicast and broadcast frames to CPU */
-+ t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) |
-+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) |
-+ (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S);
-+ ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t);
-+
-+ /* enable jumbo frames */
-+ ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE,
-+ AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
-+
-+ /* Enable MIB counters */
-+ ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0,
-+ AR40XX_MODULE_EN_MIB);
-+
-+ /* Disable AZ */
-+ ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0);
-+
-+ /* set flowctrl thershold for cpu port */
-+ t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
-+ AR40XX_PORT0_FC_THRESH_OFF_DFLT;
-+ ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
-+}
-+
-+static void
-+ar40xx_malibu_init(struct ar40xx_priv *priv)
-+{
-+ int i;
-+ struct mii_bus *bus;
-+ u16 val;
-+
-+ bus = priv->mii_bus;
-+
-+ /* war to enable AZ transmitting ability */
-+ ar40xx_phy_mmd_write(priv, AR40XX_PSGMII_ID, 1,
-+ AR40XX_MALIBU_PSGMII_MODE_CTRL,
-+ AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL);
-+ for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
-+ /* change malibu control_dac */
-+ val = ar40xx_phy_mmd_read(priv, i, 7,
-+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL);
-+ val &= ~AR40XX_MALIBU_DAC_CTRL_MASK;
-+ val |= AR40XX_MALIBU_DAC_CTRL_VALUE;
-+ ar40xx_phy_mmd_write(priv, i, 7,
-+ AR40XX_MALIBU_PHY_MMD7_DAC_CTRL, val);
-+ if (i == AR40XX_MALIBU_PHY_LAST_ADDR) {
-+ /* to avoid goes into hibernation */
-+ val = ar40xx_phy_mmd_read(priv, i, 3,
-+ AR40XX_MALIBU_PHY_RLP_CTRL);
-+ val &= (~(1<<1));
-+ ar40xx_phy_mmd_write(priv, i, 3,
-+ AR40XX_MALIBU_PHY_RLP_CTRL, val);
-+ }
-+ }
-+
-+ /* adjust psgmii serdes tx amp */
-+ mdiobus_write(bus, AR40XX_PSGMII_ID, AR40XX_PSGMII_TX_DRIVER_1_CTRL,
-+ AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP);
-+}
-+
-+static int
-+ar40xx_hw_init(struct ar40xx_priv *priv)
-+{
-+ u32 i;
-+
-+ ar40xx_ess_reset(priv);
-+
-+ if (priv->mii_bus)
-+ ar40xx_malibu_init(priv);
-+ else
-+ return -1;
-+
-+ ar40xx_psgmii_self_test(priv);
-+ ar40xx_psgmii_self_test_clean(priv);
-+
-+ ar40xx_mac_mode_init(priv, priv->mac_mode);
-+
-+ for (i = 0; i < priv->dev.ports; i++)
-+ ar40xx_init_port(priv, i);
-+
-+ ar40xx_init_globals(priv);
-+
-+ return 0;
-+}
-+
-+/* Start of qm error WAR */
-+
-+static
-+int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id)
-+{
-+ u32 reg;
-+
-+ if (port_id < 0 || port_id > 6)
-+ return -1;
-+
-+ reg = AR40XX_REG_PORT_STATUS(port_id);
-+ return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED,
-+ (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX));
-+}
-+
-+static
-+int ar40xx_get_qm_status(struct ar40xx_priv *priv,
-+ u32 port_id, u32 *qm_buffer_err)
-+{
-+ u32 reg;
-+ u32 qm_val;
-+
-+ if (port_id < 1 || port_id > 5) {
-+ *qm_buffer_err = 0;
-+ return -1;
-+ }
-+
-+ if (port_id < 4) {
-+ reg = AR40XX_REG_QM_PORT0_3_QNUM;
-+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
-+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
-+ /* every 8 bits for each port */
-+ *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF;
-+ } else {
-+ reg = AR40XX_REG_QM_PORT4_6_QNUM;
-+ ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
-+ qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
-+ /* every 8 bits for each port */
-+ *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF;
-+ }
-+
-+ return 0;
-+}
-+
-+static void
-+ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv)
-+{
-+ static int task_count;
-+ u32 i;
-+ u32 reg, value;
-+ u32 link, speed, duplex;
-+ u32 qm_buffer_err;
-+ u16 port_phy_status[AR40XX_NUM_PORTS];
-+ static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
-+ static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
-+ struct mii_bus *bus = NULL;
-+
-+ if (!priv || !priv->mii_bus)
-+ return;
-+
-+ bus = priv->mii_bus;
-+
-+ ++task_count;
-+
-+ for (i = 1; i < AR40XX_NUM_PORTS; ++i) {
-+ port_phy_status[i] =
-+ mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS);
-+ speed = link = duplex = port_phy_status[i];
-+ speed &= AR40XX_PHY_SPEC_STATUS_SPEED;
-+ speed >>= 14;
-+ link &= AR40XX_PHY_SPEC_STATUS_LINK;
-+ link >>= 10;
-+ duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX;
-+ duplex >>= 13;
-+
-+ if (link != priv->ar40xx_port_old_link[i]) {
-+ ++link_cnt[i];
-+ /* Up --> Down */
-+ if ((priv->ar40xx_port_old_link[i] ==
-+ AR40XX_PORT_LINK_UP) &&
-+ (link == AR40XX_PORT_LINK_DOWN)) {
-+ /* LINK_EN disable(MAC force mode)*/
-+ reg = AR40XX_REG_PORT_STATUS(i);
-+ ar40xx_rmw(priv, reg,
-+ AR40XX_PORT_AUTO_LINK_EN, 0);
-+
-+ /* Check queue buffer */
-+ qm_err_cnt[i] = 0;
-+ ar40xx_get_qm_status(priv, i, &qm_buffer_err);
-+ if (qm_buffer_err) {
-+ priv->ar40xx_port_qm_buf[i] =
-+ AR40XX_QM_NOT_EMPTY;
-+ } else {
-+ u16 phy_val = 0;
-+
-+ priv->ar40xx_port_qm_buf[i] =
-+ AR40XX_QM_EMPTY;
-+ ar40xx_force_1g_full(priv, i);
-+ /* Ref:QCA8337 Datasheet,Clearing
-+ * MENU_CTRL_EN prevents phy to
-+ * stuck in 100BT mode when
-+ * bringing up the link
-+ */
-+ ar40xx_phy_dbg_read(priv, i-1,
-+ AR40XX_PHY_DEBUG_0,
-+ &phy_val);
-+ phy_val &= (~AR40XX_PHY_MANU_CTRL_EN);
-+ ar40xx_phy_dbg_write(priv, i-1,
-+ AR40XX_PHY_DEBUG_0,
-+ phy_val);
-+ }
-+ priv->ar40xx_port_old_link[i] = link;
-+ } else if ((priv->ar40xx_port_old_link[i] ==
-+ AR40XX_PORT_LINK_DOWN) &&
-+ (link == AR40XX_PORT_LINK_UP)) {
-+ /* Down --> Up */
-+ if (priv->port_link_up[i] < 1) {
-+ ++priv->port_link_up[i];
-+ } else {
-+ /* Change port status */
-+ reg = AR40XX_REG_PORT_STATUS(i);
-+ value = ar40xx_read(priv, reg);
-+ priv->port_link_up[i] = 0;
-+
-+ value &= ~(AR40XX_PORT_DUPLEX |
-+ AR40XX_PORT_SPEED);
-+ value |= speed | (duplex ? BIT(6) : 0);
-+ ar40xx_write(priv, reg, value);
-+ /* clock switch need such time
-+ * to avoid glitch
-+ */
-+ usleep_range(100, 200);
-+
-+ value |= AR40XX_PORT_AUTO_LINK_EN;
-+ ar40xx_write(priv, reg, value);
-+ /* HW need such time to make sure link
-+ * stable before enable MAC
-+ */
-+ usleep_range(100, 200);
-+
-+ if (speed == AR40XX_PORT_SPEED_100M) {
-+ u16 phy_val = 0;
-+ /* Enable @100M, if down to 10M
-+ * clock will change smoothly
-+ */
-+ ar40xx_phy_dbg_read(priv, i-1,
-+ 0,
-+ &phy_val);
-+ phy_val |=
-+ AR40XX_PHY_MANU_CTRL_EN;
-+ ar40xx_phy_dbg_write(priv, i-1,
-+ 0,
-+ phy_val);
-+ }
-+ priv->ar40xx_port_old_link[i] = link;
-+ }
-+ }
-+ }
-+
-+ if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) {
-+ /* Check QM */
-+ ar40xx_get_qm_status(priv, i, &qm_buffer_err);
-+ if (qm_buffer_err) {
-+ ++qm_err_cnt[i];
-+ } else {
-+ priv->ar40xx_port_qm_buf[i] =
-+ AR40XX_QM_EMPTY;
-+ qm_err_cnt[i] = 0;
-+ ar40xx_force_1g_full(priv, i);
-+ }
-+ }
-+ }
-+}
-+
-+static void
-+ar40xx_qm_err_check_work_task(struct work_struct *work)
-+{
-+ struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv,
-+ qm_dwork.work);
-+
-+ mutex_lock(&priv->qm_lock);
-+
-+ ar40xx_sw_mac_polling_task(priv);
-+
-+ mutex_unlock(&priv->qm_lock);
-+
-+ schedule_delayed_work(&priv->qm_dwork,
-+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-+}
-+
-+static int
-+ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv)
-+{
-+ mutex_init(&priv->qm_lock);
-+
-+ INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task);
-+
-+ schedule_delayed_work(&priv->qm_dwork,
-+ msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-+
-+ return 0;
-+}
-+
-+/* End of qm error WAR */
-+
-+static int
-+ar40xx_vlan_init(struct ar40xx_priv *priv)
-+{
-+ int port;
-+ unsigned long bmp;
-+
-+ /* By default Enable VLAN */
-+ priv->vlan = 1;
-+ priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp;
-+ priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp;
-+ priv->vlan_tagged = priv->cpu_bmp;
-+ bmp = priv->lan_bmp;
-+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
-+ priv->pvid[port] = AR40XX_LAN_VLAN;
-+
-+ bmp = priv->wan_bmp;
-+ for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
-+ priv->pvid[port] = AR40XX_WAN_VLAN;
-+
-+ return 0;
-+}
-+
-+static void
-+ar40xx_mib_work_func(struct work_struct *work)
-+{
-+ struct ar40xx_priv *priv;
-+ int err;
-+
-+ priv = container_of(work, struct ar40xx_priv, mib_work.work);
-+
-+ mutex_lock(&priv->mib_lock);
-+
-+ err = ar40xx_mib_capture(priv);
-+ if (err)
-+ goto next_port;
-+
-+ ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false);
-+
-+next_port:
-+ priv->mib_next_port++;
-+ if (priv->mib_next_port >= priv->dev.ports)
-+ priv->mib_next_port = 0;
-+
-+ mutex_unlock(&priv->mib_lock);
-+
-+ schedule_delayed_work(&priv->mib_work,
-+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-+}
-+
-+static void
-+ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
-+{
-+ u32 t;
-+ u32 egress, ingress;
-+ u32 pvid = priv->vlan_id[priv->pvid[port]];
-+
-+ if (priv->vlan) {
-+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
-+ ingress = AR40XX_IN_SECURE;
-+ } else {
-+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH;
-+ ingress = AR40XX_IN_PORT_ONLY;
-+ }
-+
-+ t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S;
-+ t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
-+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
-+
-+ t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
-+ t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-+ ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-+
-+ t = members;
-+ t |= AR40XX_PORT_LOOKUP_LEARN;
-+ t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S;
-+ t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
-+ ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-+}
-+
-+static void
-+ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val)
-+{
-+ if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1,
-+ AR40XX_VTU_FUNC1_BUSY, 0))
-+ return;
-+
-+ if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD)
-+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val);
-+
-+ op |= AR40XX_VTU_FUNC1_BUSY;
-+ ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op);
-+}
-+
-+static void
-+ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask)
-+{
-+ u32 op;
-+ u32 val;
-+ int i;
-+
-+ op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S);
-+ val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL;
-+ for (i = 0; i < AR40XX_NUM_PORTS; i++) {
-+ u32 mode;
-+
-+ if ((port_mask & BIT(i)) == 0)
-+ mode = AR40XX_VTU_FUNC0_EG_MODE_NOT;
-+ else if (priv->vlan == 0)
-+ mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP;
-+ else if ((priv->vlan_tagged & BIT(i)) ||
-+ (priv->vlan_id[priv->pvid[i]] != vid))
-+ mode = AR40XX_VTU_FUNC0_EG_MODE_TAG;
-+ else
-+ mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG;
-+
-+ val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i);
-+ }
-+ ar40xx_vtu_op(priv, op, val);
-+}
-+
-+static void
-+ar40xx_vtu_flush(struct ar40xx_priv *priv)
-+{
-+ ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0);
-+}
-+
-+static int
-+ar40xx_sw_hw_apply(struct switch_dev *dev)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ u8 portmask[AR40XX_NUM_PORTS];
-+ int i, j;
-+
-+ mutex_lock(&priv->reg_mutex);
-+ /* flush all vlan entries */
-+ ar40xx_vtu_flush(priv);
-+
-+ memset(portmask, 0, sizeof(portmask));
-+ if (priv->vlan) {
-+ for (j = 0; j < AR40XX_MAX_VLANS; j++) {
-+ u8 vp = priv->vlan_table[j];
-+
-+ if (!vp)
-+ continue;
-+
-+ for (i = 0; i < dev->ports; i++) {
-+ u8 mask = BIT(i);
-+
-+ if (vp & mask)
-+ portmask[i] |= vp & ~mask;
-+ }
-+
-+ ar40xx_vtu_load_vlan(priv, priv->vlan_id[j],
-+ priv->vlan_table[j]);
-+ }
-+ } else {
-+ /* 8021q vlan disabled */
-+ for (i = 0; i < dev->ports; i++) {
-+ if (i == AR40XX_PORT_CPU)
-+ continue;
-+
-+ portmask[i] = BIT(AR40XX_PORT_CPU);
-+ portmask[AR40XX_PORT_CPU] |= BIT(i);
-+ }
-+ }
-+
-+ /* update the port destination mask registers and tag settings */
-+ for (i = 0; i < dev->ports; i++)
-+ ar40xx_setup_port(priv, i, portmask[i]);
-+
-+ ar40xx_set_mirror_regs(priv);
-+
-+ mutex_unlock(&priv->reg_mutex);
-+ return 0;
-+}
-+
-+static int
-+ar40xx_sw_reset_switch(struct switch_dev *dev)
-+{
-+ struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-+ int i, rv;
-+
-+ mutex_lock(&priv->reg_mutex);
-+ memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) -
-+ offsetof(struct ar40xx_priv, vlan));
-+
-+ for (i = 0; i < AR40XX_MAX_VLANS; i++)
-+ priv->vlan_id[i] = i;
-+
-+ ar40xx_vlan_init(priv);
-+
-+ priv->mirror_rx = false;
-+ priv->mirror_tx = false;
-+ priv->source_port = 0;
-+ priv->monitor_port = 0;
-+
-+ mutex_unlock(&priv->reg_mutex);
-+
-+ rv = ar40xx_sw_hw_apply(dev);
-+ return rv;
-+}
-+
-+static int
-+ar40xx_start(struct ar40xx_priv *priv)
-+{
-+ int ret;
-+
-+ ret = ar40xx_hw_init(priv);
-+ if (ret)
-+ return ret;
-+
-+ ret = ar40xx_sw_reset_switch(&priv->dev);
-+ if (ret)
-+ return ret;
-+
-+ /* at last, setup cpu port */
-+ ret = ar40xx_cpuport_setup(priv);
-+ if (ret)
-+ return ret;
-+
-+ schedule_delayed_work(&priv->mib_work,
-+ msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-+
-+ ar40xx_qm_err_check_work_start(priv);
-+
-+ return 0;
-+}
-+
-+static const struct switch_dev_ops ar40xx_sw_ops = {
-+ .attr_global = {
-+ .attr = ar40xx_sw_attr_globals,
-+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals),
-+ },
-+ .attr_port = {
-+ .attr = ar40xx_sw_attr_port,
-+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port),
-+ },
-+ .attr_vlan = {
-+ .attr = ar40xx_sw_attr_vlan,
-+ .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan),
-+ },
-+ .get_port_pvid = ar40xx_sw_get_pvid,
-+ .set_port_pvid = ar40xx_sw_set_pvid,
-+ .get_vlan_ports = ar40xx_sw_get_ports,
-+ .set_vlan_ports = ar40xx_sw_set_ports,
-+ .apply_config = ar40xx_sw_hw_apply,
-+ .reset_switch = ar40xx_sw_reset_switch,
-+ .get_port_link = ar40xx_sw_get_port_link,
-+};
-+
-+/* Start of phy driver support */
-+
-+static const u32 ar40xx_phy_ids[] = {
-+ 0x004dd0b1,
-+ 0x004dd0b2, /* AR40xx */
-+};
-+
-+static bool
-+ar40xx_phy_match(u32 phy_id)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(ar40xx_phy_ids); i++)
-+ if (phy_id == ar40xx_phy_ids[i])
-+ return true;
-+
-+ return false;
-+}
-+
-+static bool
-+is_ar40xx_phy(struct mii_bus *bus)
-+{
-+ unsigned i;
-+
-+ for (i = 0; i < 4; i++) {
-+ u32 phy_id;
-+
-+ phy_id = mdiobus_read(bus, i, MII_PHYSID1) << 16;
-+ phy_id |= mdiobus_read(bus, i, MII_PHYSID2);
-+ if (!ar40xx_phy_match(phy_id))
-+ return false;
-+ }
-+
-+ return true;
-+}
-+
-+static int
-+ar40xx_phy_probe(struct phy_device *phydev)
-+{
-+ if (!is_ar40xx_phy(phydev->mdio.bus))
-+ return -ENODEV;
-+
-+ ar40xx_priv->mii_bus = phydev->mdio.bus;
-+ phydev->priv = ar40xx_priv;
-+ if (phydev->mdio.addr == 0)
-+ ar40xx_priv->phy = phydev;
-+
-+ phydev->supported |= SUPPORTED_1000baseT_Full;
-+ phydev->advertising |= ADVERTISED_1000baseT_Full;
-+ return 0;
-+}
-+
-+static void
-+ar40xx_phy_remove(struct phy_device *phydev)
-+{
-+ ar40xx_priv->mii_bus = NULL;
-+ phydev->priv = NULL;
-+}
-+
-+static int
-+ar40xx_phy_config_init(struct phy_device *phydev)
-+{
-+ return 0;
-+}
-+
-+static int
-+ar40xx_phy_read_status(struct phy_device *phydev)
-+{
-+ if (phydev->mdio.addr != 0)
-+ return genphy_read_status(phydev);
-+
-+ return 0;
-+}
-+
-+static int
-+ar40xx_phy_config_aneg(struct phy_device *phydev)
-+{
-+ if (phydev->mdio.addr == 0)
-+ return 0;
-+
-+ return genphy_config_aneg(phydev);
-+}
-+
-+static struct phy_driver ar40xx_phy_driver = {
-+ .phy_id = 0x004d0000,
-+ .name = "QCA Malibu",
-+ .phy_id_mask = 0xffff0000,
-+ .features = PHY_BASIC_FEATURES,
-+ .probe = ar40xx_phy_probe,
-+ .remove = ar40xx_phy_remove,
-+ .config_init = ar40xx_phy_config_init,
-+ .config_aneg = ar40xx_phy_config_aneg,
-+ .read_status = ar40xx_phy_read_status,
-+};
-+
-+static uint16_t ar40xx_gpio_get_phy(unsigned int offset)
-+{
-+ return offset / 4;
-+}
-+
-+static uint16_t ar40xx_gpio_get_reg(unsigned int offset)
-+{
-+ return 0x8074 + offset % 4;
-+}
-+
-+static void ar40xx_gpio_set(struct gpio_chip *gc, unsigned int offset,
-+ int value)
-+{
-+ struct ar40xx_priv *priv = gpiochip_get_data(gc);
-+
-+ ar40xx_phy_mmd_write(priv, ar40xx_gpio_get_phy(offset), 0x7,
-+ ar40xx_gpio_get_reg(offset),
-+ value ? 0xA000 : 0x8000);
-+}
-+
-+static int ar40xx_gpio_get(struct gpio_chip *gc, unsigned offset)
-+{
-+ struct ar40xx_priv *priv = gpiochip_get_data(gc);
-+
-+ return ar40xx_phy_mmd_read(priv, ar40xx_gpio_get_phy(offset), 0x7,
-+ ar40xx_gpio_get_reg(offset)) == 0xA000;
-+}
-+
-+static int ar40xx_gpio_get_dir(struct gpio_chip *gc, unsigned offset)
-+{
-+ return 0; /* only out direction */
-+}
-+
-+static int ar40xx_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
-+ int value)
-+{
-+ /*
-+ * the direction out value is used to set the initial value.
-+ * support of this function is required by leds-gpio.c
-+ */
-+ ar40xx_gpio_set(gc, offset, value);
-+ return 0;
-+}
-+
-+static void ar40xx_register_gpio(struct device *pdev,
-+ struct ar40xx_priv *priv,
-+ struct device_node *switch_node)
-+{
-+ struct gpio_chip *gc;
-+ int err;
-+
-+ gc = devm_kzalloc(pdev, sizeof(*gc), GFP_KERNEL);
-+ if (!gc)
-+ return;
-+
-+ gc->label = "ar40xx_gpio",
-+ gc->base = -1,
-+ gc->ngpio = 5 /* mmd 0 - 4 */ * 4 /* 0x8074 - 0x8077 */,
-+ gc->parent = pdev;
-+ gc->owner = THIS_MODULE;
-+
-+ gc->get_direction = ar40xx_gpio_get_dir;
-+ gc->direction_output = ar40xx_gpio_dir_out;
-+ gc->get = ar40xx_gpio_get;
-+ gc->set = ar40xx_gpio_set;
-+ gc->can_sleep = true;
-+ gc->label = priv->dev.name;
-+ gc->of_node = switch_node;
-+
-+ err = devm_gpiochip_add_data(pdev, gc, priv);
-+ if (err != 0)
-+ dev_err(pdev, "Failed to register gpio %d.\n", err);
-+}
-+
-+/* End of phy driver support */
-+
-+/* Platform driver probe function */
-+
-+static int ar40xx_probe(struct platform_device *pdev)
-+{
-+ struct device_node *switch_node;
-+ struct device_node *psgmii_node;
-+ const __be32 *mac_mode;
-+ struct clk *ess_clk;
-+ struct switch_dev *swdev;
-+ struct ar40xx_priv *priv;
-+ u32 len;
-+ u32 num_mibs;
-+ struct resource psgmii_base = {0};
-+ struct resource switch_base = {0};
-+ int ret;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, priv);
-+ ar40xx_priv = priv;
-+
-+ switch_node = of_node_get(pdev->dev.of_node);
-+ if (of_address_to_resource(switch_node, 0, &switch_base) != 0)
-+ return -EIO;
-+
-+ priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base);
-+ if (IS_ERR(priv->hw_addr)) {
-+ dev_err(&pdev->dev, "Failed to ioremap switch_base!\n");
-+ return PTR_ERR(priv->hw_addr);
-+ }
-+
-+ /*psgmii dts get*/
-+ psgmii_node = of_find_node_by_name(NULL, "ess-psgmii");
-+ if (!psgmii_node) {
-+ dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n");
-+ return -EINVAL;
-+ }
-+
-+ if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0)
-+ return -EIO;
-+
-+ priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base);
-+ if (IS_ERR(priv->psgmii_hw_addr)) {
-+ dev_err(&pdev->dev, "psgmii ioremap fail!\n");
-+ return PTR_ERR(priv->psgmii_hw_addr);
-+ }
-+
-+ mac_mode = of_get_property(switch_node, "switch_mac_mode", &len);
-+ if (!mac_mode) {
-+ dev_err(&pdev->dev, "Failed to read switch_mac_mode\n");
-+ return -EINVAL;
-+ }
-+ priv->mac_mode = be32_to_cpup(mac_mode);
-+
-+ ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
-+ if (ess_clk)
-+ clk_prepare_enable(ess_clk);
-+
-+ priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst");
-+ if (IS_ERR(priv->ess_rst)) {
-+ dev_err(&pdev->dev, "Failed to get ess_rst control!\n");
-+ return PTR_ERR(priv->ess_rst);
-+ }
-+
-+ if (of_property_read_u32(switch_node, "switch_cpu_bmp",
-+ &priv->cpu_bmp) ||
-+ of_property_read_u32(switch_node, "switch_lan_bmp",
-+ &priv->lan_bmp) ||
-+ of_property_read_u32(switch_node, "switch_wan_bmp",
-+ &priv->wan_bmp)) {
-+ dev_err(&pdev->dev, "Failed to read port properties\n");
-+ return -EIO;
-+ }
-+
-+ ret = phy_driver_register(&ar40xx_phy_driver, THIS_MODULE);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to register ar40xx phy driver!\n");
-+ return -EIO;
-+ }
-+
-+ mutex_init(&priv->reg_mutex);
-+ mutex_init(&priv->mib_lock);
-+ INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func);
-+
-+ /* register switch */
-+ swdev = &priv->dev;
-+
-+ swdev->alias = dev_name(&priv->mii_bus->dev);
-+
-+ swdev->cpu_port = AR40XX_PORT_CPU;
-+ swdev->name = "QCA AR40xx";
-+ swdev->vlans = AR40XX_MAX_VLANS;
-+ swdev->ports = AR40XX_NUM_PORTS;
-+ swdev->ops = &ar40xx_sw_ops;
-+ ret = register_switch(swdev, NULL);
-+ if (ret)
-+ goto err_unregister_phy;
-+
-+ num_mibs = ARRAY_SIZE(ar40xx_mibs);
-+ len = priv->dev.ports * num_mibs *
-+ sizeof(*priv->mib_stats);
-+ priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
-+ if (!priv->mib_stats) {
-+ ret = -ENOMEM;
-+ goto err_unregister_switch;
-+ }
-+
-+ ar40xx_start(priv);
-+
-+ if (of_property_read_bool(switch_node, "gpio-controller"))
-+ ar40xx_register_gpio(&pdev->dev, ar40xx_priv, switch_node);
-+
-+ return 0;
-+
-+err_unregister_switch:
-+ unregister_switch(&priv->dev);
-+err_unregister_phy:
-+ phy_driver_unregister(&ar40xx_phy_driver);
-+ platform_set_drvdata(pdev, NULL);
-+ return ret;
-+}
-+
-+static int ar40xx_remove(struct platform_device *pdev)
-+{
-+ struct ar40xx_priv *priv = platform_get_drvdata(pdev);
-+
-+ cancel_delayed_work_sync(&priv->qm_dwork);
-+ cancel_delayed_work_sync(&priv->mib_work);
-+
-+ unregister_switch(&priv->dev);
-+
-+ phy_driver_unregister(&ar40xx_phy_driver);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ar40xx_of_mtable[] = {
-+ {.compatible = "qcom,ess-switch" },
-+ {}
-+};
-+
-+struct platform_driver ar40xx_drv = {
-+ .probe = ar40xx_probe,
-+ .remove = ar40xx_remove,
-+ .driver = {
-+ .name = "ar40xx",
-+ .of_match_table = ar40xx_of_mtable,
-+ },
-+};
-+
-+module_platform_driver(ar40xx_drv);
-+
-+MODULE_DESCRIPTION("IPQ40XX ESS driver");
-+MODULE_LICENSE("Dual BSD/GPL");
---- /dev/null
-+++ b/drivers/net/phy/ar40xx.h
-@@ -0,0 +1,337 @@
-+/*
-+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+ #ifndef __AR40XX_H
-+#define __AR40XX_H
-+
-+#define AR40XX_MAX_VLANS 128
-+#define AR40XX_NUM_PORTS 6
-+#define AR40XX_NUM_PHYS 5
-+
-+#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s)
-+
-+struct ar40xx_priv {
-+ struct switch_dev dev;
-+
-+ u8 __iomem *hw_addr;
-+ u8 __iomem *psgmii_hw_addr;
-+ u32 mac_mode;
-+ struct reset_control *ess_rst;
-+ u32 cpu_bmp;
-+ u32 lan_bmp;
-+ u32 wan_bmp;
-+
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phy;
-+
-+ /* mutex for qm task */
-+ struct mutex qm_lock;
-+ struct delayed_work qm_dwork;
-+ u32 port_link_up[AR40XX_NUM_PORTS];
-+ u32 ar40xx_port_old_link[AR40XX_NUM_PORTS];
-+ u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS];
-+
-+ u32 phy_t_status;
-+
-+ /* mutex for switch reg access */
-+ struct mutex reg_mutex;
-+
-+ /* mutex for mib task */
-+ struct mutex mib_lock;
-+ struct delayed_work mib_work;
-+ int mib_next_port;
-+ u64 *mib_stats;
-+
-+ char buf[2048];
-+
-+ /* all fields below will be cleared on reset */
-+ bool vlan;
-+ u16 vlan_id[AR40XX_MAX_VLANS];
-+ u8 vlan_table[AR40XX_MAX_VLANS];
-+ u8 vlan_tagged;
-+ u16 pvid[AR40XX_NUM_PORTS];
-+
-+ /* mirror */
-+ bool mirror_rx;
-+ bool mirror_tx;
-+ int source_port;
-+ int monitor_port;
-+};
-+
-+#define AR40XX_PORT_LINK_UP 1
-+#define AR40XX_PORT_LINK_DOWN 0
-+#define AR40XX_QM_NOT_EMPTY 1
-+#define AR40XX_QM_EMPTY 0
-+
-+#define AR40XX_LAN_VLAN 1
-+#define AR40XX_WAN_VLAN 2
-+
-+enum ar40xx_port_wrapper_cfg {
-+ PORT_WRAPPER_PSGMII = 0,
-+};
-+
-+struct ar40xx_mib_desc {
-+ u32 size;
-+ u32 offset;
-+ const char *name;
-+};
-+
-+#define AR40XX_PORT_CPU 0
-+
-+#define AR40XX_PSGMII_MODE_CONTROL 0x1b4
-+#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0)
-+
-+#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288
-+
-+#define AR40XX_MII_ATH_MMD_ADDR 0x0d
-+#define AR40XX_MII_ATH_MMD_DATA 0x0e
-+#define AR40XX_MII_ATH_DBG_ADDR 0x1d
-+#define AR40XX_MII_ATH_DBG_DATA 0x1e
-+
-+#define AR40XX_STATS_RXBROAD 0x00
-+#define AR40XX_STATS_RXPAUSE 0x04
-+#define AR40XX_STATS_RXMULTI 0x08
-+#define AR40XX_STATS_RXFCSERR 0x0c
-+#define AR40XX_STATS_RXALIGNERR 0x10
-+#define AR40XX_STATS_RXRUNT 0x14
-+#define AR40XX_STATS_RXFRAGMENT 0x18
-+#define AR40XX_STATS_RX64BYTE 0x1c
-+#define AR40XX_STATS_RX128BYTE 0x20
-+#define AR40XX_STATS_RX256BYTE 0x24
-+#define AR40XX_STATS_RX512BYTE 0x28
-+#define AR40XX_STATS_RX1024BYTE 0x2c
-+#define AR40XX_STATS_RX1518BYTE 0x30
-+#define AR40XX_STATS_RXMAXBYTE 0x34
-+#define AR40XX_STATS_RXTOOLONG 0x38
-+#define AR40XX_STATS_RXGOODBYTE 0x3c
-+#define AR40XX_STATS_RXBADBYTE 0x44
-+#define AR40XX_STATS_RXOVERFLOW 0x4c
-+#define AR40XX_STATS_FILTERED 0x50
-+#define AR40XX_STATS_TXBROAD 0x54
-+#define AR40XX_STATS_TXPAUSE 0x58
-+#define AR40XX_STATS_TXMULTI 0x5c
-+#define AR40XX_STATS_TXUNDERRUN 0x60
-+#define AR40XX_STATS_TX64BYTE 0x64
-+#define AR40XX_STATS_TX128BYTE 0x68
-+#define AR40XX_STATS_TX256BYTE 0x6c
-+#define AR40XX_STATS_TX512BYTE 0x70
-+#define AR40XX_STATS_TX1024BYTE 0x74
-+#define AR40XX_STATS_TX1518BYTE 0x78
-+#define AR40XX_STATS_TXMAXBYTE 0x7c
-+#define AR40XX_STATS_TXOVERSIZE 0x80
-+#define AR40XX_STATS_TXBYTE 0x84
-+#define AR40XX_STATS_TXCOLLISION 0x8c
-+#define AR40XX_STATS_TXABORTCOL 0x90
-+#define AR40XX_STATS_TXMULTICOL 0x94
-+#define AR40XX_STATS_TXSINGLECOL 0x98
-+#define AR40XX_STATS_TXEXCDEFER 0x9c
-+#define AR40XX_STATS_TXDEFER 0xa0
-+#define AR40XX_STATS_TXLATECOL 0xa4
-+
-+#define AR40XX_REG_MODULE_EN 0x030
-+#define AR40XX_MODULE_EN_MIB BIT(0)
-+
-+#define AR40XX_REG_MIB_FUNC 0x034
-+#define AR40XX_MIB_BUSY BIT(17)
-+#define AR40XX_MIB_CPU_KEEP BIT(20)
-+#define AR40XX_MIB_FUNC BITS(24, 3)
-+#define AR40XX_MIB_FUNC_S 24
-+#define AR40XX_MIB_FUNC_NO_OP 0x0
-+#define AR40XX_MIB_FUNC_FLUSH 0x1
-+
-+#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
-+#define AR40XX_PORT_SPEED BITS(0, 2)
-+#define AR40XX_PORT_STATUS_SPEED_S 0
-+#define AR40XX_PORT_TX_EN BIT(2)
-+#define AR40XX_PORT_RX_EN BIT(3)
-+#define AR40XX_PORT_STATUS_TXFLOW BIT(4)
-+#define AR40XX_PORT_STATUS_RXFLOW BIT(5)
-+#define AR40XX_PORT_DUPLEX BIT(6)
-+#define AR40XX_PORT_TXHALF_FLOW BIT(7)
-+#define AR40XX_PORT_STATUS_LINK_UP BIT(8)
-+#define AR40XX_PORT_AUTO_LINK_EN BIT(9)
-+#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12)
-+
-+#define AR40XX_REG_MAX_FRAME_SIZE 0x078
-+#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14)
-+
-+#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4)
-+
-+#define AR40XX_REG_EEE_CTRL 0x100
-+#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2)
-+
-+#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8)
-+#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12)
-+#define AR40XX_PORT_VLAN0_DEF_SVID_S 0
-+#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12)
-+#define AR40XX_PORT_VLAN0_DEF_CVID_S 16
-+
-+#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
-+#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
-+#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2)
-+#define AR40XX_PORT_VLAN1_OUT_MODE_S 12
-+#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0
-+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1
-+#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2
-+#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3
-+
-+#define AR40XX_REG_VTU_FUNC0 0x0610
-+#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14)
-+#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
-+#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0
-+#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1
-+#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2
-+#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3
-+#define AR40XX_VTU_FUNC0_IVL BIT(19)
-+#define AR40XX_VTU_FUNC0_VALID BIT(20)
-+
-+#define AR40XX_REG_VTU_FUNC1 0x0614
-+#define AR40XX_VTU_FUNC1_OP BITS(0, 3)
-+#define AR40XX_VTU_FUNC1_OP_NOOP 0
-+#define AR40XX_VTU_FUNC1_OP_FLUSH 1
-+#define AR40XX_VTU_FUNC1_OP_LOAD 2
-+#define AR40XX_VTU_FUNC1_OP_PURGE 3
-+#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4
-+#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5
-+#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6
-+#define AR40XX_VTU_FUNC1_FULL BIT(4)
-+#define AR40XX_VTU_FUNC1_PORT BIT(8, 4)
-+#define AR40XX_VTU_FUNC1_PORT_S 8
-+#define AR40XX_VTU_FUNC1_VID BIT(16, 12)
-+#define AR40XX_VTU_FUNC1_VID_S 16
-+#define AR40XX_VTU_FUNC1_BUSY BIT(31)
-+
-+#define AR40XX_REG_FWD_CTRL0 0x620
-+#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10)
-+#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4)
-+#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4
-+
-+#define AR40XX_REG_FWD_CTRL1 0x624
-+#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7)
-+#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0
-+#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7)
-+#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8
-+#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7)
-+#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16
-+#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7)
-+#define AR40XX_FWD_CTRL1_IGMP_S 24
-+
-+#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc)
-+#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7)
-+#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2)
-+#define AR40XX_PORT_LOOKUP_IN_MODE_S 8
-+#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3)
-+#define AR40XX_PORT_LOOKUP_STATE_S 16
-+#define AR40XX_PORT_LOOKUP_LEARN BIT(20)
-+#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21)
-+#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
-+
-+#define AR40XX_REG_ATU_FUNC 0x60c
-+#define AR40XX_ATU_FUNC_OP BITS(0, 4)
-+#define AR40XX_ATU_FUNC_OP_NOOP 0x0
-+#define AR40XX_ATU_FUNC_OP_FLUSH 0x1
-+#define AR40XX_ATU_FUNC_OP_LOAD 0x2
-+#define AR40XX_ATU_FUNC_OP_PURGE 0x3
-+#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4
-+#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5
-+#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6
-+#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7
-+#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8
-+#define AR40XX_ATU_FUNC_BUSY BIT(31)
-+
-+#define AR40XX_REG_QM_DEBUG_ADDR 0x820
-+#define AR40XX_REG_QM_DEBUG_VALUE 0x824
-+#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d
-+#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e
-+
-+#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
-+#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
-+
-+#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4)
-+#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60
-+#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90
-+
-+#define AR40XX_PHY_DEBUG_0 0
-+#define AR40XX_PHY_MANU_CTRL_EN BIT(12)
-+
-+#define AR40XX_PHY_DEBUG_2 2
-+
-+#define AR40XX_PHY_SPEC_STATUS 0x11
-+#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10)
-+#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13)
-+#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2)
-+
-+/* port forwarding state */
-+enum {
-+ AR40XX_PORT_STATE_DISABLED = 0,
-+ AR40XX_PORT_STATE_BLOCK = 1,
-+ AR40XX_PORT_STATE_LISTEN = 2,
-+ AR40XX_PORT_STATE_LEARN = 3,
-+ AR40XX_PORT_STATE_FORWARD = 4
-+};
-+
-+/* ingress 802.1q mode */
-+enum {
-+ AR40XX_IN_PORT_ONLY = 0,
-+ AR40XX_IN_PORT_FALLBACK = 1,
-+ AR40XX_IN_VLAN_ONLY = 2,
-+ AR40XX_IN_SECURE = 3
-+};
-+
-+/* egress 802.1q mode */
-+enum {
-+ AR40XX_OUT_KEEP = 0,
-+ AR40XX_OUT_STRIP_VLAN = 1,
-+ AR40XX_OUT_ADD_VLAN = 2
-+};
-+
-+/* port speed */
-+enum {
-+ AR40XX_PORT_SPEED_10M = 0,
-+ AR40XX_PORT_SPEED_100M = 1,
-+ AR40XX_PORT_SPEED_1000M = 2,
-+ AR40XX_PORT_SPEED_ERR = 3,
-+};
-+
-+#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */
-+
-+#define AR40XX_QM_WORK_DELAY 100
-+
-+#define AR40XX_MIB_FUNC_CAPTURE 0x3
-+
-+#define AR40XX_REG_PORT_STATS_START 0x1000
-+#define AR40XX_REG_PORT_STATS_LEN 0x100
-+
-+#define AR40XX_PORTS_ALL 0x3f
-+
-+#define AR40XX_PSGMII_ID 5
-+#define AR40XX_PSGMII_CALB_NUM 100
-+#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d
-+#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c
-+#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a
-+#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380
-+#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280
-+#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a
-+#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb
-+#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a
-+#define AR40XX_MALIBU_PHY_LAST_ADDR 4
-+
-+static inline struct ar40xx_priv *
-+swdev_to_ar40xx(struct switch_dev *swdev)
-+{
-+ return container_of(swdev, struct ar40xx_priv, dev);
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/phy/mdio-ipq40xx.c
-@@ -0,0 +1,203 @@
-+/*
-+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/io.h>
-+#include <linux/of_address.h>
-+#include <linux/of_mdio.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
-+
-+#define MDIO_CTRL_0_REG 0x40
-+#define MDIO_CTRL_1_REG 0x44
-+#define MDIO_CTRL_2_REG 0x48
-+#define MDIO_CTRL_3_REG 0x4c
-+#define MDIO_CTRL_4_REG 0x50
-+#define MDIO_CTRL_4_ACCESS_BUSY BIT(16)
-+#define MDIO_CTRL_4_ACCESS_START BIT(8)
-+#define MDIO_CTRL_4_ACCESS_CODE_READ 0
-+#define MDIO_CTRL_4_ACCESS_CODE_WRITE 1
-+#define CTRL_0_REG_DEFAULT_VALUE 0x150FF
-+
-+#define IPQ40XX_MDIO_RETRY 1000
-+#define IPQ40XX_MDIO_DELAY 10
-+
-+struct ipq40xx_mdio_data {
-+ struct mii_bus *mii_bus;
-+ void __iomem *membase;
-+ int phy_irq[PHY_MAX_ADDR];
-+ struct device *dev;
-+};
-+
-+static int ipq40xx_mdio_wait_busy(struct ipq40xx_mdio_data *am)
-+{
-+ int i;
-+
-+ for (i = 0; i < IPQ40XX_MDIO_RETRY; i++) {
-+ unsigned int busy;
-+
-+ busy = readl(am->membase + MDIO_CTRL_4_REG) &
-+ MDIO_CTRL_4_ACCESS_BUSY;
-+ if (!busy)
-+ return 0;
-+
-+ /* BUSY might take to be cleard by 15~20 times of loop */
-+ udelay(IPQ40XX_MDIO_DELAY);
-+ }
-+
-+ dev_err(am->dev, "%s: MDIO operation timed out\n", am->mii_bus->name);
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int ipq40xx_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-+{
-+ struct ipq40xx_mdio_data *am = bus->priv;
-+ int value = 0;
-+ unsigned int cmd = 0;
-+
-+ lockdep_assert_held(&bus->mdio_lock);
-+
-+ if (ipq40xx_mdio_wait_busy(am))
-+ return -ETIMEDOUT;
-+
-+ /* issue the phy address and reg */
-+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
-+
-+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_READ;
-+
-+ /* issue read command */
-+ writel(cmd, am->membase + MDIO_CTRL_4_REG);
-+
-+ /* Wait read complete */
-+ if (ipq40xx_mdio_wait_busy(am))
-+ return -ETIMEDOUT;
-+
-+ /* Read data */
-+ value = readl(am->membase + MDIO_CTRL_3_REG);
-+
-+ return value;
-+}
-+
-+static int ipq40xx_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-+ u16 value)
-+{
-+ struct ipq40xx_mdio_data *am = bus->priv;
-+ unsigned int cmd = 0;
-+
-+ lockdep_assert_held(&bus->mdio_lock);
-+
-+ if (ipq40xx_mdio_wait_busy(am))
-+ return -ETIMEDOUT;
-+
-+ /* issue the phy address and reg */
-+ writel((mii_id << 8) | regnum, am->membase + MDIO_CTRL_1_REG);
-+
-+ /* issue write data */
-+ writel(value, am->membase + MDIO_CTRL_2_REG);
-+
-+ cmd = MDIO_CTRL_4_ACCESS_START|MDIO_CTRL_4_ACCESS_CODE_WRITE;
-+ /* issue write command */
-+ writel(cmd, am->membase + MDIO_CTRL_4_REG);
-+
-+ /* Wait write complete */
-+ if (ipq40xx_mdio_wait_busy(am))
-+ return -ETIMEDOUT;
-+
-+ return 0;
-+}
-+
-+static int ipq40xx_mdio_probe(struct platform_device *pdev)
-+{
-+ struct ipq40xx_mdio_data *am;
-+ struct resource *res;
-+ int i;
-+
-+ am = devm_kzalloc(&pdev->dev, sizeof(*am), GFP_KERNEL);
-+ if (!am)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "no iomem resource found\n");
-+ return -ENXIO;
-+ }
-+
-+ am->membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(am->membase)) {
-+ dev_err(&pdev->dev, "unable to ioremap registers\n");
-+ return PTR_ERR(am->membase);
-+ }
-+
-+ am->mii_bus = devm_mdiobus_alloc(&pdev->dev);
-+ if (!am->mii_bus)
-+ return -ENOMEM;
-+
-+ writel(CTRL_0_REG_DEFAULT_VALUE, am->membase + MDIO_CTRL_0_REG);
-+
-+ am->mii_bus->name = "ipq40xx_mdio";
-+ am->mii_bus->read = ipq40xx_mdio_read;
-+ am->mii_bus->write = ipq40xx_mdio_write;
-+ memcpy(am->mii_bus->irq, am->phy_irq, sizeof(am->phy_irq));
-+ am->mii_bus->priv = am;
-+ am->mii_bus->parent = &pdev->dev;
-+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
-+
-+ for (i = 0; i < PHY_MAX_ADDR; i++)
-+ am->phy_irq[i] = PHY_POLL;
-+
-+ am->dev = &pdev->dev;
-+ platform_set_drvdata(pdev, am);
-+
-+ /* edma_axi_probe() use "am" drvdata.
-+ * ipq40xx_mdio_probe() must be called first.
-+ */
-+ return of_mdiobus_register(am->mii_bus, pdev->dev.of_node);
-+}
-+
-+static int ipq40xx_mdio_remove(struct platform_device *pdev)
-+{
-+ struct ipq40xx_mdio_data *am = platform_get_drvdata(pdev);
-+
-+ mdiobus_unregister(am->mii_bus);
-+ return 0;
-+}
-+
-+static const struct of_device_id ipq40xx_mdio_dt_ids[] = {
-+ { .compatible = "qcom,ipq4019-mdio" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, ipq40xx_mdio_dt_ids);
-+
-+static struct platform_driver ipq40xx_mdio_driver = {
-+ .probe = ipq40xx_mdio_probe,
-+ .remove = ipq40xx_mdio_remove,
-+ .driver = {
-+ .name = "ipq40xx-mdio",
-+ .of_match_table = ipq40xx_mdio_dt_ids,
-+ },
-+};
-+
-+module_platform_driver(ipq40xx_mdio_driver);
-+
-+#define DRV_VERSION "1.0"
-+
-+MODULE_DESCRIPTION("IPQ40XX MDIO interface driver");
-+MODULE_AUTHOR("Qualcomm Atheros");
-+MODULE_VERSION(DRV_VERSION);
-+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch
deleted file mode 100644
index 676da72147..0000000000
--- a/target/linux/ipq806x/patches-4.9/701-dts-ipq4019-add-mdio-node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:10:33 +0100
-Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
-
-This patch adds the mdio device-tree node.
-This is where the switch is connected to, so it's needed
-for the ethernet interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -315,6 +315,34 @@
- reg = <0x4ab000 0x4>;
- };
-
-+ mdio@90000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "qcom,ipq4019-mdio";
-+ reg = <0x90000 0x64>;
-+ status = "disabled";
-+
-+ ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+
-+ ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+
-+ ethernet-phy@2 {
-+ reg = <2>;
-+ };
-+
-+ ethernet-phy@3 {
-+ reg = <3>;
-+ };
-+
-+ ethernet-phy@4 {
-+ reg = <4>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qca,uni-ssphy";
- reg = <0x9a000 0x800>;
diff --git a/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch
deleted file mode 100644
index 79031d398a..0000000000
--- a/target/linux/ipq806x/patches-4.9/702-dts-ipq4019-add-PHY-switch-nodes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 02:20:54 +0100
-Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
-
-This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
-nodes which are needed for the ar40xx.c driver to initialize the
-switch.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -343,6 +343,29 @@
- };
- };
-
-+ ess-switch@c000000 {
-+ compatible = "qcom,ess-switch";
-+ reg = <0xc000000 0x80000>;
-+ switch_access_mode = "local bus";
-+ resets = <&gcc ESS_RESET>;
-+ reset-names = "ess_rst";
-+ clocks = <&gcc GCC_ESS_CLK>;
-+ clock-names = "ess_clk";
-+ switch_cpu_bmp = <0x1>;
-+ switch_lan_bmp = <0x1e>;
-+ switch_wan_bmp = <0x20>;
-+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
-+ switch_initvlas = <0x7c 0x54>;
-+ status = "disabled";
-+ };
-+
-+ ess-psgmii@98000 {
-+ compatible = "qcom,ess-psgmii";
-+ reg = <0x98000 0x800>;
-+ psgmii_access_mode = "local bus";
-+ status = "disabled";
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qca,uni-ssphy";
- reg = <0x9a000 0x800>;
diff --git a/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch
deleted file mode 100644
index eb84124b54..0000000000
--- a/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch
+++ /dev/null
@@ -1,4602 +0,0 @@
-From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 19 Jan 2017 02:01:31 +0100
-Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++
- drivers/net/ethernet/qualcomm/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/net/ethernet/qualcomm/Kconfig
-+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -37,4 +37,13 @@ config QCOM_EMAC
- low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
- Precision Clock Synchronization Protocol.
-
-+config ESSEDMA
-+ tristate "Qualcomm Atheros ESS Edma support"
-+ ---help---
-+ This driver supports ethernet edma adapter.
-+ Say Y to build this driver.
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called essedma.ko.
-+
- endif # NET_VENDOR_QUALCOMM
---- a/drivers/net/ethernet/qualcomm/Makefile
-+++ b/drivers/net/ethernet/qualcomm/Makefile
-@@ -6,3 +6,4 @@ obj-$(CONFIG_QCA7000) += qcaspi.o
- qcaspi-objs := qca_spi.o qca_framing.o qca_7k.o qca_debug.o
-
- obj-y += emac/
-+obj-$(CONFIG_ESSEDMA) += essedma/
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile
-@@ -0,0 +1,9 @@
-+#
-+## Makefile for the Qualcomm Atheros ethernet edma driver
-+#
-+
-+
-+obj-$(CONFIG_ESSEDMA) += essedma.o
-+
-+essedma-objs := edma_axi.o edma.o edma_ethtool.o
-+
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
-@@ -0,0 +1,2168 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/if_vlan.h>
-+#include "ess_edma.h"
-+#include "edma.h"
-+
-+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-+bool edma_stp_rstp;
-+u16 edma_ath_eth_type;
-+
-+/* edma_skb_priority_offset()
-+ * get edma skb priority
-+ */
-+static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
-+{
-+ return (skb->priority >> 2) & 1;
-+}
-+
-+/* edma_alloc_tx_ring()
-+ * Allocate Tx descriptors ring
-+ */
-+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
-+ struct edma_tx_desc_ring *etdr)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+
-+ /* Initialize ring */
-+ etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
-+ etdr->sw_next_to_fill = 0;
-+ etdr->sw_next_to_clean = 0;
-+
-+ /* Allocate SW descriptors */
-+ etdr->sw_desc = vzalloc(etdr->size);
-+ if (!etdr->sw_desc) {
-+ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
-+ return -ENOMEM;
-+ }
-+
-+ /* Allocate HW descriptors */
-+ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
-+ GFP_KERNEL);
-+ if (!etdr->hw_desc) {
-+ dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
-+ vfree(etdr->sw_desc);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+/* edma_free_tx_ring()
-+ * Free tx rings allocated by edma_alloc_tx_rings
-+ */
-+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
-+ struct edma_tx_desc_ring *etdr)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+
-+ if (likely(etdr->dma))
-+ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
-+ etdr->dma);
-+
-+ vfree(etdr->sw_desc);
-+ etdr->sw_desc = NULL;
-+}
-+
-+/* edma_alloc_rx_ring()
-+ * allocate rx descriptor ring
-+ */
-+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
-+ struct edma_rfd_desc_ring *erxd)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+
-+ erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
-+ erxd->sw_next_to_fill = 0;
-+ erxd->sw_next_to_clean = 0;
-+
-+ /* Allocate SW descriptors */
-+ erxd->sw_desc = vzalloc(erxd->size);
-+ if (!erxd->sw_desc)
-+ return -ENOMEM;
-+
-+ /* Alloc HW descriptors */
-+ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
-+ GFP_KERNEL);
-+ if (!erxd->hw_desc) {
-+ vfree(erxd->sw_desc);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+/* edma_free_rx_ring()
-+ * Free rx ring allocated by alloc_rx_ring
-+ */
-+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
-+ struct edma_rfd_desc_ring *rxdr)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+
-+ if (likely(rxdr->dma))
-+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
-+ rxdr->dma);
-+
-+ vfree(rxdr->sw_desc);
-+ rxdr->sw_desc = NULL;
-+}
-+
-+/* edma_configure_tx()
-+ * Configure transmission control data
-+ */
-+static void edma_configure_tx(struct edma_common_info *edma_cinfo)
-+{
-+ u32 txq_ctrl_data;
-+
-+ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
-+ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
-+ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
-+ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
-+}
-+
-+
-+/* edma_configure_rx()
-+ * configure reception control data
-+ */
-+static void edma_configure_rx(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_hw *hw = &edma_cinfo->hw;
-+ u32 rss_type, rx_desc1, rxq_ctrl_data;
-+
-+ /* Set RSS type */
-+ rss_type = hw->rss_type;
-+ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
-+
-+ /* Set RFD burst number */
-+ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
-+
-+ /* Set RFD prefetch threshold */
-+ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
-+
-+ /* Set RFD in host ring low threshold to generte interrupt */
-+ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
-+ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
-+
-+ /* Set Rx FIFO threshold to start to DMA data to host */
-+ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
-+
-+ /* Set RX remove vlan bit */
-+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
-+
-+ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
-+}
-+
-+/* edma_alloc_rx_buf()
-+ * does skb allocation for the received packets.
-+ */
-+static int edma_alloc_rx_buf(struct edma_common_info
-+ *edma_cinfo,
-+ struct edma_rfd_desc_ring *erdr,
-+ int cleaned_count, int queue_id)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ struct edma_rx_free_desc *rx_desc;
-+ struct edma_sw_desc *sw_desc;
-+ struct sk_buff *skb;
-+ unsigned int i;
-+ u16 prod_idx, length;
-+ u32 reg_data;
-+
-+ if (cleaned_count > erdr->count) {
-+ dev_err(&pdev->dev, "Incorrect cleaned_count %d",
-+ cleaned_count);
-+ return -1;
-+ }
-+
-+ i = erdr->sw_next_to_fill;
-+
-+ while (cleaned_count) {
-+ sw_desc = &erdr->sw_desc[i];
-+ length = edma_cinfo->rx_head_buffer_len;
-+
-+ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
-+ skb = sw_desc->skb;
-+ } else {
-+ /* alloc skb */
-+ skb = netdev_alloc_skb(edma_netdev[0], length);
-+ if (!skb) {
-+ /* Better luck next round */
-+ break;
-+ }
-+ }
-+
-+ if (edma_cinfo->page_mode) {
-+ struct page *pg = alloc_page(GFP_ATOMIC);
-+
-+ if (!pg) {
-+ dev_kfree_skb_any(skb);
-+ break;
-+ }
-+
-+ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
-+ edma_cinfo->rx_page_buffer_len,
-+ DMA_FROM_DEVICE);
-+ if (dma_mapping_error(&pdev->dev,
-+ sw_desc->dma)) {
-+ __free_page(pg);
-+ dev_kfree_skb_any(skb);
-+ break;
-+ }
-+
-+ skb_fill_page_desc(skb, 0, pg, 0,
-+ edma_cinfo->rx_page_buffer_len);
-+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
-+ sw_desc->length = edma_cinfo->rx_page_buffer_len;
-+ } else {
-+ sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
-+ length, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(&pdev->dev,
-+ sw_desc->dma)) {
-+ dev_kfree_skb_any(skb);
-+ break;
-+ }
-+
-+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
-+ sw_desc->length = length;
-+ }
-+
-+ /* Update the buffer info */
-+ sw_desc->skb = skb;
-+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
-+ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
-+ if (++i == erdr->count)
-+ i = 0;
-+ cleaned_count--;
-+ }
-+
-+ erdr->sw_next_to_fill = i;
-+
-+ if (i == 0)
-+ prod_idx = erdr->count - 1;
-+ else
-+ prod_idx = i - 1;
-+
-+ /* Update the producer index */
-+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &reg_data);
-+ reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
-+ reg_data |= prod_idx;
-+ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
-+ return cleaned_count;
-+}
-+
-+/* edma_init_desc()
-+ * update descriptor ring size, buffer and producer/consumer index
-+ */
-+static void edma_init_desc(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_rfd_desc_ring *rfd_ring;
-+ struct edma_tx_desc_ring *etdr;
-+ int i = 0, j = 0;
-+ u32 data = 0;
-+ u16 hw_cons_idx = 0;
-+
-+ /* Set the base address of every TPD ring. */
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+ etdr = edma_cinfo->tpd_ring[i];
-+
-+ /* Update descriptor ring base address */
-+ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
-+ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
-+
-+ /* Calculate hardware consumer index */
-+ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
-+ etdr->sw_next_to_fill = hw_cons_idx;
-+ etdr->sw_next_to_clean = hw_cons_idx;
-+ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
-+ data |= hw_cons_idx;
-+
-+ /* update producer index */
-+ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
-+
-+ /* update SW consumer index register */
-+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
-+
-+ /* Set TPD ring size */
-+ edma_write_reg(EDMA_REG_TPD_RING_SIZE,
-+ edma_cinfo->tx_ring_count &
-+ EDMA_TPD_RING_SIZE_MASK);
-+ }
-+
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ rfd_ring = edma_cinfo->rfd_ring[j];
-+ /* Update Receive Free descriptor ring base address */
-+ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
-+ (u32)(rfd_ring->dma));
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+
-+ data = edma_cinfo->rx_head_buffer_len;
-+ if (edma_cinfo->page_mode)
-+ data = edma_cinfo->rx_page_buffer_len;
-+
-+ data &= EDMA_RX_BUF_SIZE_MASK;
-+ data <<= EDMA_RX_BUF_SIZE_SHIFT;
-+
-+ /* Update RFD ring size and RX buffer size */
-+ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
-+ << EDMA_RFD_RING_SIZE_SHIFT;
-+
-+ edma_write_reg(EDMA_REG_RX_DESC0, data);
-+
-+ /* Disable TX FIFO low watermark and high watermark */
-+ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
-+
-+ /* Load all of base address above */
-+ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
-+ data |= 1 << EDMA_LOAD_PTR_SHIFT;
-+ edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
-+}
-+
-+/* edma_receive_checksum
-+ * Api to check checksum on receive packets
-+ */
-+static void edma_receive_checksum(struct edma_rx_return_desc *rd,
-+ struct sk_buff *skb)
-+{
-+ skb_checksum_none_assert(skb);
-+
-+ /* check the RRD IP/L4 checksum bit to see if
-+ * its set, which in turn indicates checksum
-+ * failure.
-+ */
-+ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
-+ return;
-+
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+}
-+
-+/* edma_clean_rfd()
-+ * clean up rx resourcers on error
-+ */
-+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
-+{
-+ struct edma_rx_free_desc *rx_desc;
-+ struct edma_sw_desc *sw_desc;
-+
-+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
-+ sw_desc = &erdr->sw_desc[index];
-+ if (sw_desc->skb) {
-+ dev_kfree_skb_any(sw_desc->skb);
-+ sw_desc->skb = NULL;
-+ }
-+
-+ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
-+}
-+
-+/* edma_rx_complete_fraglist()
-+ * Complete Rx processing for fraglist skbs
-+ */
-+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
-+{
-+ int i;
-+ u32 priority;
-+ u16 port_type;
-+ u8 mac_addr[EDMA_ETH_HDR_LEN];
-+
-+ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
-+ & EDMA_RRD_PORT_TYPE_MASK;
-+ /* if port type is 0x4, then only proceed with
-+ * other stp/rstp calculation
-+ */
-+ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
-+ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
-+
-+ /* calculate the frame priority */
-+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
-+ & EDMA_RRD_PRIORITY_MASK;
-+
-+ for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
-+ mac_addr[i] = skb->data[i];
-+
-+ /* Check if destination mac addr is bpdu addr */
-+ if (!memcmp(mac_addr, bpdu_mac, 6)) {
-+ /* destination mac address is BPDU
-+ * destination mac address, then add
-+ * atheros header to the packet.
-+ */
-+ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
-+ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
-+ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
-+ skb_push(skb, 4);
-+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
-+ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
-+ *(uint16_t *)&skb->data[14] = htons(athr_hdr);
-+ }
-+ }
-+}
-+
-+/*
-+ * edma_rx_complete_fraglist()
-+ * Complete Rx processing for fraglist skbs
-+ */
-+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
-+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ struct edma_hw *hw = &edma_cinfo->hw;
-+ struct sk_buff *skb_temp;
-+ struct edma_sw_desc *sw_desc;
-+ int i;
-+ u16 size_remaining;
-+
-+ skb->data_len = 0;
-+ skb->tail += (hw->rx_head_buff_size - 16);
-+ skb->len = skb->truesize = length;
-+ size_remaining = length - (hw->rx_head_buff_size - 16);
-+
-+ /* clean-up all related sw_descs */
-+ for (i = 1; i < num_rfds; i++) {
-+ struct sk_buff *skb_prev;
-+ sw_desc = &erdr->sw_desc[sw_next_to_clean];
-+ skb_temp = sw_desc->skb;
-+
-+ dma_unmap_single(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_FROM_DEVICE);
-+
-+ if (size_remaining < hw->rx_head_buff_size)
-+ skb_put(skb_temp, size_remaining);
-+ else
-+ skb_put(skb_temp, hw->rx_head_buff_size);
-+
-+ /*
-+ * If we are processing the first rfd, we link
-+ * skb->frag_list to the skb corresponding to the
-+ * first RFD
-+ */
-+ if (i == 1)
-+ skb_shinfo(skb)->frag_list = skb_temp;
-+ else
-+ skb_prev->next = skb_temp;
-+ skb_prev = skb_temp;
-+ skb_temp->next = NULL;
-+
-+ skb->data_len += skb_temp->len;
-+ size_remaining -= skb_temp->len;
-+
-+ /* Increment SW index */
-+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+ (*cleaned_count)++;
-+ }
-+
-+ return sw_next_to_clean;
-+}
-+
-+/* edma_rx_complete_paged()
-+ * Complete Rx processing for paged skbs
-+ */
-+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
-+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ struct sk_buff *skb_temp;
-+ struct edma_sw_desc *sw_desc;
-+ int i;
-+ u16 size_remaining;
-+
-+ skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
-+
-+ /* Setup skbuff fields */
-+ skb->len = length;
-+
-+ if (likely(num_rfds <= 1)) {
-+ skb->data_len = length;
-+ skb->truesize += edma_cinfo->rx_page_buffer_len;
-+ skb_fill_page_desc(skb, 0, skb_frag_page(frag),
-+ 16, length);
-+ } else {
-+ frag->size -= 16;
-+ skb->data_len = frag->size;
-+ skb->truesize += edma_cinfo->rx_page_buffer_len;
-+ size_remaining = length - frag->size;
-+
-+ skb_fill_page_desc(skb, 0, skb_frag_page(frag),
-+ 16, frag->size);
-+
-+ /* clean-up all related sw_descs */
-+ for (i = 1; i < num_rfds; i++) {
-+ sw_desc = &erdr->sw_desc[sw_next_to_clean];
-+ skb_temp = sw_desc->skb;
-+ frag = &skb_shinfo(skb_temp)->frags[0];
-+ dma_unmap_page(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_FROM_DEVICE);
-+
-+ if (size_remaining < edma_cinfo->rx_page_buffer_len)
-+ frag->size = size_remaining;
-+
-+ skb_fill_page_desc(skb, i, skb_frag_page(frag),
-+ 0, frag->size);
-+
-+ skb_shinfo(skb_temp)->nr_frags = 0;
-+ dev_kfree_skb_any(skb_temp);
-+
-+ skb->data_len += frag->size;
-+ skb->truesize += edma_cinfo->rx_page_buffer_len;
-+ size_remaining -= frag->size;
-+
-+ /* Increment SW index */
-+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+ (*cleaned_count)++;
-+ }
-+ }
-+
-+ return sw_next_to_clean;
-+}
-+
-+/*
-+ * edma_rx_complete()
-+ * Main api called from the poll function to process rx packets.
-+ */
-+static void edma_rx_complete(struct edma_common_info *edma_cinfo,
-+ int *work_done, int work_to_do, int queue_id,
-+ struct napi_struct *napi)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
-+ struct net_device *netdev;
-+ struct edma_adapter *adapter;
-+ struct edma_sw_desc *sw_desc;
-+ struct sk_buff *skb;
-+ struct edma_rx_return_desc *rd;
-+ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
-+ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
-+ u32 data = 0;
-+ u8 *vaddr;
-+ int port_id, i, drop_count = 0;
-+ u32 priority;
-+ u16 count = erdr->count, rfd_avail;
-+ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
-+
-+ sw_next_to_clean = erdr->sw_next_to_clean;
-+
-+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
-+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
-+ EDMA_RFD_CONS_IDX_MASK;
-+
-+ do {
-+ while (sw_next_to_clean != hw_next_to_clean) {
-+ if (!work_to_do)
-+ break;
-+
-+ sw_desc = &erdr->sw_desc[sw_next_to_clean];
-+ skb = sw_desc->skb;
-+
-+ /* Unmap the allocated buffer */
-+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
-+ dma_unmap_single(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_FROM_DEVICE);
-+ else
-+ dma_unmap_page(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_FROM_DEVICE);
-+
-+ /* Get RRD */
-+ if (edma_cinfo->page_mode) {
-+ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
-+ memcpy((uint8_t *)&rrd[0], vaddr, 16);
-+ rd = (struct edma_rx_return_desc *)rrd;
-+ kunmap_atomic(vaddr);
-+ } else {
-+ rd = (struct edma_rx_return_desc *)skb->data;
-+ }
-+
-+ /* Check if RRD is valid */
-+ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
-+ edma_clean_rfd(erdr, sw_next_to_clean);
-+ sw_next_to_clean = (sw_next_to_clean + 1) &
-+ (erdr->count - 1);
-+ cleaned_count++;
-+ continue;
-+ }
-+
-+ /* Get the number of RFDs from RRD */
-+ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
-+
-+ /* Get Rx port ID from switch */
-+ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
-+ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
-+ dev_err(&pdev->dev, "Invalid RRD source port bit set");
-+ for (i = 0; i < num_rfds; i++) {
-+ edma_clean_rfd(erdr, sw_next_to_clean);
-+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+ cleaned_count++;
-+ }
-+ continue;
-+ }
-+
-+ /* check if we have a sink for the data we receive.
-+ * If the interface isn't setup, we have to drop the
-+ * incoming data for now.
-+ */
-+ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
-+ if (!netdev) {
-+ edma_clean_rfd(erdr, sw_next_to_clean);
-+ sw_next_to_clean = (sw_next_to_clean + 1) &
-+ (erdr->count - 1);
-+ cleaned_count++;
-+ continue;
-+ }
-+ adapter = netdev_priv(netdev);
-+
-+ /* This code is added to handle a usecase where high
-+ * priority stream and a low priority stream are
-+ * received simultaneously on DUT. The problem occurs
-+ * if one of the Rx rings is full and the corresponding
-+ * core is busy with other stuff. This causes ESS CPU
-+ * port to backpressure all incoming traffic including
-+ * high priority one. We monitor free descriptor count
-+ * on each CPU and whenever it reaches threshold (< 80),
-+ * we drop all low priority traffic and let only high
-+ * priotiy traffic pass through. We can hence avoid
-+ * ESS CPU port to send backpressure on high priroity
-+ * stream.
-+ */
-+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
-+ & EDMA_RRD_PRIORITY_MASK;
-+ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
-+ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
-+ if (rfd_avail < EDMA_RFD_AVAIL_THR) {
-+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
-+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
-+ adapter->stats.rx_dropped++;
-+ cleaned_count++;
-+ drop_count++;
-+ if (drop_count == 3) {
-+ work_to_do--;
-+ (*work_done)++;
-+ drop_count = 0;
-+ }
-+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
-+ /* If buffer clean count reaches 16, we replenish HW buffers. */
-+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
-+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
-+ sw_next_to_clean);
-+ cleaned_count = ret_count;
-+ }
-+ continue;
-+ }
-+ }
-+
-+ work_to_do--;
-+ (*work_done)++;
-+
-+ /* Increment SW index */
-+ sw_next_to_clean = (sw_next_to_clean + 1) &
-+ (erdr->count - 1);
-+
-+ cleaned_count++;
-+
-+ /* Get the packet size and allocate buffer */
-+ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
-+
-+ if (edma_cinfo->page_mode) {
-+ /* paged skb */
-+ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
-+ if (!pskb_may_pull(skb, ETH_HLEN)) {
-+ dev_kfree_skb_any(skb);
-+ continue;
-+ }
-+ } else {
-+ /* single or fraglist skb */
-+
-+ /* Addition of 16 bytes is required, as in the packet
-+ * first 16 bytes are rrd descriptors, so actual data
-+ * starts from an offset of 16.
-+ */
-+ skb_reserve(skb, 16);
-+ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
-+ skb_put(skb, length);
-+ } else {
-+ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
-+ }
-+ }
-+
-+ if (edma_stp_rstp) {
-+ edma_rx_complete_stp_rstp(skb, port_id, rd);
-+ }
-+
-+ skb->protocol = eth_type_trans(skb, netdev);
-+
-+ /* Record Rx queue for RFS/RPS and fill flow hash from HW */
-+ skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
-+ if (netdev->features & NETIF_F_RXHASH) {
-+ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
-+ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
-+ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
-+ }
-+
-+#ifdef CONFIG_NF_FLOW_COOKIE
-+ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
-+#endif
-+ edma_receive_checksum(rd, skb);
-+
-+ /* Process VLAN HW acceleration indication provided by HW */
-+ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
-+ vlan = rd->rrd4;
-+ if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
-+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
-+ else if (rd->rrd1 & EDMA_RRD_SVLAN)
-+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
-+ }
-+
-+ /* Update rx statistics */
-+ adapter->stats.rx_packets++;
-+ adapter->stats.rx_bytes += length;
-+
-+ /* Check if we reached refill threshold */
-+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
-+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
-+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
-+ sw_next_to_clean);
-+ cleaned_count = ret_count;
-+ }
-+
-+ /* At this point skb should go to stack */
-+ napi_gro_receive(napi, skb);
-+ }
-+
-+ /* Check if we still have NAPI budget */
-+ if (!work_to_do)
-+ break;
-+
-+ /* Read index once again since we still have NAPI budget */
-+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
-+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
-+ EDMA_RFD_CONS_IDX_MASK;
-+ } while (hw_next_to_clean != sw_next_to_clean);
-+
-+ erdr->sw_next_to_clean = sw_next_to_clean;
-+
-+ /* Refill here in case refill threshold wasn't reached */
-+ if (likely(cleaned_count)) {
-+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
-+ if (ret_count)
-+ dev_dbg(&pdev->dev, "Not all buffers was reallocated");
-+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
-+ erdr->sw_next_to_clean);
-+ }
-+}
-+
-+/* edma_delete_rfs_filter()
-+ * Remove RFS filter from switch
-+ */
-+static int edma_delete_rfs_filter(struct edma_adapter *adapter,
-+ struct edma_rfs_filter_node *filter_node)
-+{
-+ int res = -1;
-+
-+ struct flow_keys *keys = &filter_node->keys;
-+
-+ if (likely(adapter->set_rfs_rule))
-+ res = (*adapter->set_rfs_rule)(adapter->netdev,
-+ flow_get_u32_src(keys), flow_get_u32_dst(keys),
-+ keys->ports.src, keys->ports.dst,
-+ keys->basic.ip_proto, filter_node->rq_id, 0);
-+
-+ return res;
-+}
-+
-+/* edma_add_rfs_filter()
-+ * Add RFS filter to switch
-+ */
-+static int edma_add_rfs_filter(struct edma_adapter *adapter,
-+ struct flow_keys *keys, u16 rq,
-+ struct edma_rfs_filter_node *filter_node)
-+{
-+ int res = -1;
-+
-+ struct flow_keys *dest_keys = &filter_node->keys;
-+
-+ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
-+/*
-+ dest_keys->control = keys->control;
-+ dest_keys->basic = keys->basic;
-+ dest_keys->addrs = keys->addrs;
-+ dest_keys->ports = keys->ports;
-+ dest_keys.ip_proto = keys->ip_proto;
-+*/
-+ /* Call callback registered by ESS driver */
-+ if (likely(adapter->set_rfs_rule))
-+ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
-+ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
-+ keys->basic.ip_proto, rq, 1);
-+
-+ return res;
-+}
-+
-+/* edma_rfs_key_search()
-+ * Look for existing RFS entry
-+ */
-+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
-+ struct flow_keys *key)
-+{
-+ struct edma_rfs_filter_node *p;
-+
-+ hlist_for_each_entry(p, h, node)
-+ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
-+ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
-+ p->keys.ports.src == key->ports.src &&
-+ p->keys.ports.dst == key->ports.dst &&
-+ p->keys.basic.ip_proto == key->basic.ip_proto)
-+ return p;
-+ return NULL;
-+}
-+
-+/* edma_initialise_rfs_flow_table()
-+ * Initialise EDMA RFS flow table
-+ */
-+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
-+{
-+ int i;
-+
-+ spin_lock_init(&adapter->rfs.rfs_ftab_lock);
-+
-+ /* Initialize EDMA flow hash table */
-+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
-+ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
-+
-+ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
-+ adapter->rfs.filter_available = adapter->rfs.max_num_filter;
-+ adapter->rfs.hashtoclean = 0;
-+
-+ /* Add timer to get periodic RFS updates from OS */
-+ init_timer(&adapter->rfs.expire_rfs);
-+ adapter->rfs.expire_rfs.function = edma_flow_may_expire;
-+ adapter->rfs.expire_rfs.data = (unsigned long)adapter;
-+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-+}
-+
-+/* edma_free_rfs_flow_table()
-+ * Free EDMA RFS flow table
-+ */
-+static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
-+{
-+ int i;
-+
-+ /* Remove sync timer */
-+ del_timer_sync(&adapter->rfs.expire_rfs);
-+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+
-+ /* Free EDMA RFS table entries */
-+ adapter->rfs.filter_available = 0;
-+
-+ /* Clean-up EDMA flow hash table */
-+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
-+ struct hlist_head *hhead;
-+ struct hlist_node *tmp;
-+ struct edma_rfs_filter_node *filter_node;
-+ int res;
-+
-+ hhead = &adapter->rfs.hlist_head[i];
-+ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
-+ res = edma_delete_rfs_filter(adapter, filter_node);
-+ if (res < 0)
-+ dev_warn(&adapter->netdev->dev,
-+ "EDMA going down but RFS entry %d not allowed to be flushed by Switch",
-+ filter_node->flow_id);
-+ hlist_del(&filter_node->node);
-+ kfree(filter_node);
-+ }
-+ }
-+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+}
-+
-+/* edma_tx_unmap_and_free()
-+ * clean TX buffer
-+ */
-+static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
-+ struct edma_sw_desc *sw_desc)
-+{
-+ struct sk_buff *skb = sw_desc->skb;
-+
-+ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
-+ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
-+ /* unmap_single for skb head area */
-+ dma_unmap_single(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_TO_DEVICE);
-+ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
-+ /* unmap page for paged fragments */
-+ dma_unmap_page(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_TO_DEVICE);
-+
-+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
-+ dev_kfree_skb_any(skb);
-+
-+ sw_desc->flags = 0;
-+}
-+
-+/* edma_tx_complete()
-+ * Used to clean tx queues and update hardware and consumer index
-+ */
-+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
-+{
-+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+ struct edma_sw_desc *sw_desc;
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ int i;
-+
-+ u16 sw_next_to_clean = etdr->sw_next_to_clean;
-+ u16 hw_next_to_clean;
-+ u32 data = 0;
-+
-+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
-+ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
-+
-+ /* clean the buffer here */
-+ while (sw_next_to_clean != hw_next_to_clean) {
-+ sw_desc = &etdr->sw_desc[sw_next_to_clean];
-+ edma_tx_unmap_and_free(pdev, sw_desc);
-+ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
-+ }
-+
-+ etdr->sw_next_to_clean = sw_next_to_clean;
-+
-+ /* update the TPD consumer index register */
-+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
-+
-+ /* Wake the queue if queue is stopped and netdev link is up */
-+ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
-+ if (netif_tx_queue_stopped(etdr->nq[i])) {
-+ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
-+ netif_tx_wake_queue(etdr->nq[i]);
-+ }
-+ }
-+}
-+
-+/* edma_get_tx_buffer()
-+ * Get sw_desc corresponding to the TPD
-+ */
-+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
-+ struct edma_tx_desc *tpd, int queue_id)
-+{
-+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
-+}
-+
-+/* edma_get_next_tpd()
-+ * Return a TPD descriptor for transfer
-+ */
-+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
-+ int queue_id)
-+{
-+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+ u16 sw_next_to_fill = etdr->sw_next_to_fill;
-+ struct edma_tx_desc *tpd_desc =
-+ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
-+
-+ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
-+
-+ return tpd_desc;
-+}
-+
-+/* edma_tpd_available()
-+ * Check number of free TPDs
-+ */
-+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
-+ int queue_id)
-+{
-+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+
-+ u16 sw_next_to_fill;
-+ u16 sw_next_to_clean;
-+ u16 count = 0;
-+
-+ sw_next_to_clean = etdr->sw_next_to_clean;
-+ sw_next_to_fill = etdr->sw_next_to_fill;
-+
-+ if (likely(sw_next_to_clean <= sw_next_to_fill))
-+ count = etdr->count;
-+
-+ return count + sw_next_to_clean - sw_next_to_fill - 1;
-+}
-+
-+/* edma_tx_queue_get()
-+ * Get the starting number of the queue
-+ */
-+static inline int edma_tx_queue_get(struct edma_adapter *adapter,
-+ struct sk_buff *skb, int txq_id)
-+{
-+ /* skb->priority is used as an index to skb priority table
-+ * and based on packet priority, correspong queue is assigned.
-+ */
-+ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
-+}
-+
-+/* edma_tx_update_hw_idx()
-+ * update the producer index for the ring transmitted
-+ */
-+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
-+ struct sk_buff *skb, int queue_id)
-+{
-+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-+ u32 tpd_idx_data;
-+
-+ /* Read and update the producer index */
-+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
-+ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
-+ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
-+ << EDMA_TPD_PROD_IDX_SHIFT;
-+
-+ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
-+}
-+
-+/* edma_rollback_tx()
-+ * Function to retrieve tx resources in case of error
-+ */
-+static void edma_rollback_tx(struct edma_adapter *adapter,
-+ struct edma_tx_desc *start_tpd, int queue_id)
-+{
-+ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
-+ struct edma_sw_desc *sw_desc;
-+ struct edma_tx_desc *tpd = NULL;
-+ u16 start_index, index;
-+
-+ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
-+
-+ index = start_index;
-+ while (index != etdr->sw_next_to_fill) {
-+ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
-+ sw_desc = &etdr->sw_desc[index];
-+ edma_tx_unmap_and_free(adapter->pdev, sw_desc);
-+ memset(tpd, 0, sizeof(struct edma_tx_desc));
-+ if (++index == etdr->count)
-+ index = 0;
-+ }
-+ etdr->sw_next_to_fill = start_index;
-+}
-+
-+/* edma_tx_map_and_fill()
-+ * gets called from edma_xmit_frame
-+ *
-+ * This is where the dma of the buffer to be transmitted
-+ * gets mapped
-+ */
-+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
-+ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
-+ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
-+ bool packet_is_rstp, int nr_frags)
-+{
-+ struct edma_sw_desc *sw_desc = NULL;
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
-+ struct sk_buff *iter_skb;
-+ int i = 0;
-+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
-+ u16 buf_len, lso_desc_len = 0;
-+
-+ /* It should either be a nr_frags skb or fraglist skb but not both */
-+ BUG_ON(nr_frags && skb_has_frag_list(skb));
-+
-+ if (skb_is_gso(skb)) {
-+ /* TODO: What additional checks need to be performed here */
-+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
-+ lso_word1 |= EDMA_TPD_IPV4_EN;
-+ ip_hdr(skb)->check = 0;
-+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
-+ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
-+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
-+ lso_word1 |= EDMA_TPD_LSO_V2_EN;
-+ ipv6_hdr(skb)->payload_len = 0;
-+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-+ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
-+ } else
-+ return -EINVAL;
-+
-+ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
-+ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
-+ } else if (flags_transmit & EDMA_HW_CHECKSUM) {
-+ u8 css, cso;
-+ cso = skb_checksum_start_offset(skb);
-+ css = cso + skb->csum_offset;
-+
-+ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
-+ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
-+ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
-+ }
-+
-+ if (skb->protocol == htons(ETH_P_PPP_SES))
-+ word1 |= EDMA_TPD_PPPOE_EN;
-+
-+ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
-+ switch(skb->vlan_proto) {
-+ case htons(ETH_P_8021Q):
-+ word3 |= (1 << EDMA_TX_INS_CVLAN);
-+ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
-+ break;
-+ case htons(ETH_P_8021AD):
-+ word1 |= (1 << EDMA_TX_INS_SVLAN);
-+ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
-+ break;
-+ default:
-+ dev_err(&pdev->dev, "no ctag or stag present\n");
-+ goto vlan_tag_error;
-+ }
-+ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
-+ word3 |= (1 << EDMA_TX_INS_CVLAN);
-+ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
-+ }
-+
-+ if (packet_is_rstp) {
-+ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
-+ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
-+ } else {
-+ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
-+ }
-+
-+ buf_len = skb_headlen(skb);
-+
-+ if (lso_word1) {
-+ if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
-+
-+ /* IPv6 LSOv2 descriptor */
-+ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
-+
-+ /* LSOv2 descriptor overrides addr field to pass length */
-+ tpd->addr = cpu_to_le16(skb->len);
-+ tpd->svlan_tag = svlan_tag;
-+ tpd->word1 = word1 | lso_word1;
-+ tpd->word3 = word3;
-+ }
-+
-+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+ if (!start_tpd)
-+ start_tpd = tpd;
-+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+
-+ /* The last buffer info contain the skb address,
-+ * so skb will be freed after unmap
-+ */
-+ sw_desc->length = lso_desc_len;
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-+
-+ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
-+ skb->data, buf_len, DMA_TO_DEVICE);
-+ if (dma_mapping_error(&pdev->dev, sw_desc->dma))
-+ goto dma_error;
-+
-+ tpd->addr = cpu_to_le32(sw_desc->dma);
-+ tpd->len = cpu_to_le16(buf_len);
-+
-+ tpd->svlan_tag = svlan_tag;
-+ tpd->word1 = word1 | lso_word1;
-+ tpd->word3 = word3;
-+
-+ /* The last buffer info contain the skb address,
-+ * so it will be freed after unmap
-+ */
-+ sw_desc->length = lso_desc_len;
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-+
-+ buf_len = 0;
-+ }
-+
-+ if (likely(buf_len)) {
-+
-+ /* TODO Do not dequeue descriptor if there is a potential error */
-+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+
-+ if (!start_tpd)
-+ start_tpd = tpd;
-+
-+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+
-+ /* The last buffer info contain the skb address,
-+ * so it will be free after unmap
-+ */
-+ sw_desc->length = buf_len;
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-+ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
-+ skb->data, buf_len, DMA_TO_DEVICE);
-+ if (dma_mapping_error(&pdev->dev, sw_desc->dma))
-+ goto dma_error;
-+
-+ tpd->addr = cpu_to_le32(sw_desc->dma);
-+ tpd->len = cpu_to_le16(buf_len);
-+
-+ tpd->svlan_tag = svlan_tag;
-+ tpd->word1 = word1 | lso_word1;
-+ tpd->word3 = word3;
-+ }
-+
-+ /* Walk through all paged fragments */
-+ while (nr_frags--) {
-+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-+ buf_len = skb_frag_size(frag);
-+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+ sw_desc->length = buf_len;
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
-+
-+ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
-+
-+ if (dma_mapping_error(NULL, sw_desc->dma))
-+ goto dma_error;
-+
-+ tpd->addr = cpu_to_le32(sw_desc->dma);
-+ tpd->len = cpu_to_le16(buf_len);
-+
-+ tpd->svlan_tag = svlan_tag;
-+ tpd->word1 = word1 | lso_word1;
-+ tpd->word3 = word3;
-+ i++;
-+ }
-+
-+ /* Walk through all fraglist skbs */
-+ skb_walk_frags(skb, iter_skb) {
-+ buf_len = iter_skb->len;
-+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-+ sw_desc->length = buf_len;
-+ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
-+ iter_skb->data, buf_len, DMA_TO_DEVICE);
-+
-+ if (dma_mapping_error(NULL, sw_desc->dma))
-+ goto dma_error;
-+
-+ tpd->addr = cpu_to_le32(sw_desc->dma);
-+ tpd->len = cpu_to_le16(buf_len);
-+ tpd->svlan_tag = svlan_tag;
-+ tpd->word1 = word1 | lso_word1;
-+ tpd->word3 = word3;
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
-+ }
-+
-+ if (tpd)
-+ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
-+
-+ sw_desc->skb = skb;
-+ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
-+
-+ return 0;
-+
-+dma_error:
-+ edma_rollback_tx(adapter, start_tpd, queue_id);
-+ dev_err(&pdev->dev, "TX DMA map failed\n");
-+vlan_tag_error:
-+ return -ENOMEM;
-+}
-+
-+/* edma_check_link()
-+ * check Link status
-+ */
-+static int edma_check_link(struct edma_adapter *adapter)
-+{
-+ struct phy_device *phydev = adapter->phydev;
-+
-+ if (!(adapter->poll_required))
-+ return __EDMA_LINKUP;
-+
-+ if (phydev->link)
-+ return __EDMA_LINKUP;
-+
-+ return __EDMA_LINKDOWN;
-+}
-+
-+/* edma_adjust_link()
-+ * check for edma link status
-+ */
-+void edma_adjust_link(struct net_device *netdev)
-+{
-+ int status;
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+ struct phy_device *phydev = adapter->phydev;
-+
-+ if (!test_bit(__EDMA_UP, &adapter->state_flags))
-+ return;
-+
-+ status = edma_check_link(adapter);
-+
-+ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
-+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
-+ adapter->link_state = __EDMA_LINKUP;
-+ netif_carrier_on(netdev);
-+ if (netif_running(netdev))
-+ netif_tx_wake_all_queues(netdev);
-+ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
-+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name);
-+ adapter->link_state = __EDMA_LINKDOWN;
-+ netif_carrier_off(netdev);
-+ netif_tx_stop_all_queues(netdev);
-+ }
-+}
-+
-+/* edma_get_stats()
-+ * Statistics api used to retreive the tx/rx statistics
-+ */
-+struct net_device_stats *edma_get_stats(struct net_device *netdev)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+ return &adapter->stats;
-+}
-+
-+/* edma_xmit()
-+ * Main api to be called by the core for packet transmission
-+ */
-+netdev_tx_t edma_xmit(struct sk_buff *skb,
-+ struct net_device *net_dev)
-+{
-+ struct edma_adapter *adapter = netdev_priv(net_dev);
-+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+ struct edma_tx_desc_ring *etdr;
-+ u16 from_cpu, dp_bitmap, txq_id;
-+ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
-+ unsigned int flags_transmit = 0;
-+ bool packet_is_rstp = false;
-+ struct netdev_queue *nq = NULL;
-+
-+ if (skb_shinfo(skb)->nr_frags) {
-+ nr_frags = skb_shinfo(skb)->nr_frags;
-+ num_tpds_needed += nr_frags;
-+ } else if (skb_has_frag_list(skb)) {
-+ struct sk_buff *iter_skb;
-+
-+ skb_walk_frags(skb, iter_skb)
-+ num_tpds_needed++;
-+ }
-+
-+ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
-+ dev_err(&net_dev->dev,
-+ "skb received with fragments %d which is more than %lu",
-+ num_tpds_needed, EDMA_MAX_SKB_FRAGS);
-+ dev_kfree_skb_any(skb);
-+ adapter->stats.tx_errors++;
-+ return NETDEV_TX_OK;
-+ }
-+
-+ if (edma_stp_rstp) {
-+ u16 ath_hdr, ath_eth_type;
-+ u8 mac_addr[EDMA_ETH_HDR_LEN];
-+ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
-+ if (ath_eth_type == edma_ath_eth_type) {
-+ packet_is_rstp = true;
-+ ath_hdr = htons(*(uint16_t *)&skb->data[14]);
-+ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
-+ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
-+ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
-+
-+ skb_pull(skb, 4);
-+
-+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
-+ }
-+ }
-+
-+ /* this will be one of the 4 TX queues exposed to linux kernel */
-+ txq_id = skb_get_queue_mapping(skb);
-+ queue_id = edma_tx_queue_get(adapter, skb, txq_id);
-+ etdr = edma_cinfo->tpd_ring[queue_id];
-+ nq = netdev_get_tx_queue(net_dev, txq_id);
-+
-+ local_bh_disable();
-+ /* Tx is not handled in bottom half context. Hence, we need to protect
-+ * Tx from tasks and bottom half
-+ */
-+
-+ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
-+ /* not enough descriptor, just stop queue */
-+ netif_tx_stop_queue(nq);
-+ local_bh_enable();
-+ dev_dbg(&net_dev->dev, "Not enough descriptors available");
-+ edma_cinfo->edma_ethstats.tx_desc_error++;
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ /* Check and mark VLAN tag offload */
-+ if (skb_vlan_tag_present(skb))
-+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
-+ else if (adapter->default_vlan_tag)
-+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
-+
-+ /* Check and mark checksum offload */
-+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
-+ flags_transmit |= EDMA_HW_CHECKSUM;
-+
-+ /* Map and fill descriptor for Tx */
-+ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
-+ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
-+ if (ret) {
-+ dev_kfree_skb_any(skb);
-+ adapter->stats.tx_errors++;
-+ goto netdev_okay;
-+ }
-+
-+ /* Update SW producer index */
-+ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
-+
-+ /* update tx statistics */
-+ adapter->stats.tx_packets++;
-+ adapter->stats.tx_bytes += skb->len;
-+
-+netdev_okay:
-+ local_bh_enable();
-+ return NETDEV_TX_OK;
-+}
-+
-+/*
-+ * edma_flow_may_expire()
-+ * Timer function called periodically to delete the node
-+ */
-+void edma_flow_may_expire(unsigned long data)
-+{
-+ struct edma_adapter *adapter = (struct edma_adapter *)data;
-+ int j;
-+
-+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
-+ struct hlist_head *hhead;
-+ struct hlist_node *tmp;
-+ struct edma_rfs_filter_node *n;
-+ bool res;
-+
-+ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
-+ hlist_for_each_entry_safe(n, tmp, hhead, node) {
-+ res = rps_may_expire_flow(adapter->netdev, n->rq_id,
-+ n->flow_id, n->filter_id);
-+ if (res) {
-+ int ret;
-+ ret = edma_delete_rfs_filter(adapter, n);
-+ if (ret < 0)
-+ dev_dbg(&adapter->netdev->dev,
-+ "RFS entry %d not allowed to be flushed by Switch",
-+ n->flow_id);
-+ else {
-+ hlist_del(&n->node);
-+ kfree(n);
-+ adapter->rfs.filter_available++;
-+ }
-+ }
-+ }
-+ }
-+
-+ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
-+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-+}
-+
-+/* edma_rx_flow_steer()
-+ * Called by core to to steer the flow to CPU
-+ */
-+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
-+ u16 rxq, u32 flow_id)
-+{
-+ struct flow_keys keys;
-+ struct edma_rfs_filter_node *filter_node;
-+ struct edma_adapter *adapter = netdev_priv(dev);
-+ u16 hash_tblid;
-+ int res;
-+
-+ if (skb->protocol == htons(ETH_P_IPV6)) {
-+ dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
-+ res = -EINVAL;
-+ goto no_protocol_err;
-+ }
-+
-+ /* Dissect flow parameters
-+ * We only support IPv4 + TCP/UDP
-+ */
-+ res = skb_flow_dissect_flow_keys(skb, &keys, 0);
-+ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
-+ res = -EPROTONOSUPPORT;
-+ goto no_protocol_err;
-+ }
-+
-+ /* Check if table entry exists */
-+ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
-+
-+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
-+
-+ if (filter_node) {
-+ if (rxq == filter_node->rq_id) {
-+ res = -EEXIST;
-+ goto out;
-+ } else {
-+ res = edma_delete_rfs_filter(adapter, filter_node);
-+ if (res < 0)
-+ dev_warn(&adapter->netdev->dev,
-+ "Cannot steer flow %d to different queue",
-+ filter_node->flow_id);
-+ else {
-+ adapter->rfs.filter_available++;
-+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
-+ if (res < 0) {
-+ dev_warn(&adapter->netdev->dev,
-+ "Cannot steer flow %d to different queue",
-+ filter_node->flow_id);
-+ } else {
-+ adapter->rfs.filter_available--;
-+ filter_node->rq_id = rxq;
-+ filter_node->filter_id = res;
-+ }
-+ }
-+ }
-+ } else {
-+ if (adapter->rfs.filter_available == 0) {
-+ res = -EBUSY;
-+ goto out;
-+ }
-+
-+ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
-+ if (!filter_node) {
-+ res = -ENOMEM;
-+ goto out;
-+ }
-+
-+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
-+ if (res < 0) {
-+ kfree(filter_node);
-+ goto out;
-+ }
-+
-+ adapter->rfs.filter_available--;
-+ filter_node->rq_id = rxq;
-+ filter_node->filter_id = res;
-+ filter_node->flow_id = flow_id;
-+ filter_node->keys = keys;
-+ INIT_HLIST_NODE(&filter_node->node);
-+ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
-+ }
-+
-+out:
-+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+no_protocol_err:
-+ return res;
-+}
-+
-+/* edma_register_rfs_filter()
-+ * Add RFS filter callback
-+ */
-+int edma_register_rfs_filter(struct net_device *netdev,
-+ set_rfs_filter_callback_t set_filter)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-+
-+ if (adapter->set_rfs_rule) {
-+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+ return -1;
-+ }
-+
-+ adapter->set_rfs_rule = set_filter;
-+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-+
-+ return 0;
-+}
-+
-+/* edma_alloc_tx_rings()
-+ * Allocate rx rings
-+ */
-+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ int i, err = 0;
-+
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
-+ if (err) {
-+ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
-+ return err;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/* edma_free_tx_rings()
-+ * Free tx rings
-+ */
-+void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
-+{
-+ int i;
-+
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
-+ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
-+}
-+
-+/* edma_free_tx_resources()
-+ * Free buffers associated with tx rings
-+ */
-+void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_tx_desc_ring *etdr;
-+ struct edma_sw_desc *sw_desc;
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ int i, j;
-+
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+ etdr = edma_cinfo->tpd_ring[i];
-+ for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
-+ sw_desc = &etdr->sw_desc[j];
-+ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
-+ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
-+ edma_tx_unmap_and_free(pdev, sw_desc);
-+ }
-+ }
-+}
-+
-+/* edma_alloc_rx_rings()
-+ * Allocate rx rings
-+ */
-+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
-+{
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ int i, j, err = 0;
-+
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
-+ if (err) {
-+ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
-+ return err;
-+ }
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+
-+ return 0;
-+}
-+
-+/* edma_free_rx_rings()
-+ * free rx rings
-+ */
-+void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
-+{
-+ int i, j;
-+
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+}
-+
-+/* edma_free_queues()
-+ * Free the queues allocaated
-+ */
-+void edma_free_queues(struct edma_common_info *edma_cinfo)
-+{
-+ int i , j;
-+
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+ if (edma_cinfo->tpd_ring[i])
-+ kfree(edma_cinfo->tpd_ring[i]);
-+ edma_cinfo->tpd_ring[i] = NULL;
-+ }
-+
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ if (edma_cinfo->rfd_ring[j])
-+ kfree(edma_cinfo->rfd_ring[j]);
-+ edma_cinfo->rfd_ring[j] = NULL;
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+
-+ edma_cinfo->num_rx_queues = 0;
-+ edma_cinfo->num_tx_queues = 0;
-+
-+ return;
-+}
-+
-+/* edma_free_rx_resources()
-+ * Free buffers associated with tx rings
-+ */
-+void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_rfd_desc_ring *erdr;
-+ struct edma_sw_desc *sw_desc;
-+ struct platform_device *pdev = edma_cinfo->pdev;
-+ int i, j, k;
-+
-+ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ erdr = edma_cinfo->rfd_ring[k];
-+ for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
-+ sw_desc = &erdr->sw_desc[j];
-+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
-+ dma_unmap_single(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_FROM_DEVICE);
-+ edma_clean_rfd(erdr, j);
-+ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
-+ dma_unmap_page(&pdev->dev, sw_desc->dma,
-+ sw_desc->length, DMA_FROM_DEVICE);
-+ edma_clean_rfd(erdr, j);
-+ }
-+ }
-+ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+
-+ }
-+}
-+
-+/* edma_alloc_queues_tx()
-+ * Allocate memory for all rings
-+ */
-+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
-+{
-+ int i;
-+
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+ struct edma_tx_desc_ring *etdr;
-+ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
-+ if (!etdr)
-+ goto err;
-+ etdr->count = edma_cinfo->tx_ring_count;
-+ edma_cinfo->tpd_ring[i] = etdr;
-+ }
-+
-+ return 0;
-+err:
-+ edma_free_queues(edma_cinfo);
-+ return -1;
-+}
-+
-+/* edma_alloc_queues_rx()
-+ * Allocate memory for all rings
-+ */
-+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
-+{
-+ int i, j;
-+
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ struct edma_rfd_desc_ring *rfd_ring;
-+ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
-+ GFP_KERNEL);
-+ if (!rfd_ring)
-+ goto err;
-+ rfd_ring->count = edma_cinfo->rx_ring_count;
-+ edma_cinfo->rfd_ring[j] = rfd_ring;
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+ return 0;
-+err:
-+ edma_free_queues(edma_cinfo);
-+ return -1;
-+}
-+
-+/* edma_clear_irq_status()
-+ * Clear interrupt status
-+ */
-+void edma_clear_irq_status()
-+{
-+ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
-+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-+ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
-+ edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
-+};
-+
-+/* edma_configure()
-+ * Configure skb, edma interrupts and control register.
-+ */
-+int edma_configure(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_hw *hw = &edma_cinfo->hw;
-+ u32 intr_modrt_data;
-+ u32 intr_ctrl_data = 0;
-+ int i, j, ret_count;
-+
-+ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
-+ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
-+ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
-+ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
-+
-+ edma_clear_irq_status();
-+
-+ /* Clear any WOL status */
-+ edma_write_reg(EDMA_REG_WOL_CTRL, 0);
-+ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
-+ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
-+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
-+ edma_configure_tx(edma_cinfo);
-+ edma_configure_rx(edma_cinfo);
-+
-+ /* Allocate the RX buffer */
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
-+ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
-+ if (ret_count) {
-+ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
-+ }
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+
-+ /* Configure descriptor Ring */
-+ edma_init_desc(edma_cinfo);
-+ return 0;
-+}
-+
-+/* edma_irq_enable()
-+ * Enable default interrupt generation settings
-+ */
-+void edma_irq_enable(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_hw *hw = &edma_cinfo->hw;
-+ int i, j;
-+
-+ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
-+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
-+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
-+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-+ }
-+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
-+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
-+}
-+
-+/* edma_irq_disable()
-+ * Disable Interrupt
-+ */
-+void edma_irq_disable(struct edma_common_info *edma_cinfo)
-+{
-+ int i;
-+
-+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
-+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
-+
-+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
-+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
-+ edma_write_reg(EDMA_REG_MISC_IMR, 0);
-+ edma_write_reg(EDMA_REG_WOL_IMR, 0);
-+}
-+
-+/* edma_free_irqs()
-+ * Free All IRQs
-+ */
-+void edma_free_irqs(struct edma_adapter *adapter)
-+{
-+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+ int i, j;
-+ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
-+
-+ for (i = 0; i < CONFIG_NR_CPUS; i++) {
-+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
-+ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
-+
-+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
-+ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
-+ }
-+}
-+
-+/* edma_enable_rx_ctrl()
-+ * Enable RX queue control
-+ */
-+void edma_enable_rx_ctrl(struct edma_hw *hw)
-+{
-+ u32 data;
-+
-+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
-+ data |= EDMA_RXQ_CTRL_EN;
-+ edma_write_reg(EDMA_REG_RXQ_CTRL, data);
-+}
-+
-+
-+/* edma_enable_tx_ctrl()
-+ * Enable TX queue control
-+ */
-+void edma_enable_tx_ctrl(struct edma_hw *hw)
-+{
-+ u32 data;
-+
-+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
-+ data |= EDMA_TXQ_CTRL_TXQ_EN;
-+ edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-+}
-+
-+/* edma_stop_rx_tx()
-+ * Disable RX/TQ Queue control
-+ */
-+void edma_stop_rx_tx(struct edma_hw *hw)
-+{
-+ u32 data;
-+
-+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
-+ data &= ~EDMA_RXQ_CTRL_EN;
-+ edma_write_reg(EDMA_REG_RXQ_CTRL, data);
-+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
-+ data &= ~EDMA_TXQ_CTRL_TXQ_EN;
-+ edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-+}
-+
-+/* edma_reset()
-+ * Reset the EDMA
-+ */
-+int edma_reset(struct edma_common_info *edma_cinfo)
-+{
-+ struct edma_hw *hw = &edma_cinfo->hw;
-+
-+ edma_irq_disable(edma_cinfo);
-+
-+ edma_clear_irq_status();
-+
-+ edma_stop_rx_tx(hw);
-+
-+ return 0;
-+}
-+
-+/* edma_fill_netdev()
-+ * Fill netdev for each etdr
-+ */
-+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
-+ int dev, int txq_id)
-+{
-+ struct edma_tx_desc_ring *etdr;
-+ int i = 0;
-+
-+ etdr = edma_cinfo->tpd_ring[queue_id];
-+
-+ while (etdr->netdev[i])
-+ i++;
-+
-+ if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
-+ return -1;
-+
-+ /* Populate the netdev associated with the tpd ring */
-+ etdr->netdev[i] = edma_netdev[dev];
-+ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
-+
-+ return 0;
-+}
-+
-+/* edma_change_mtu()
-+ * change the MTU of the NIC.
-+ */
-+int edma_change_mtu(struct net_device *netdev, int new_mtu)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+ int old_mtu = netdev->mtu;
-+ int max_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + (2 * VLAN_HLEN);
-+
-+ if ((max_frame_size < ETH_ZLEN + ETH_FCS_LEN) ||
-+ (max_frame_size > EDMA_MAX_JUMBO_FRAME_SIZE)) {
-+ dev_err(&edma_cinfo->pdev->dev, "MTU setting not correct\n");
-+ return -EINVAL;
-+ }
-+
-+ /* set MTU */
-+ if (old_mtu != new_mtu) {
-+ netdev->mtu = new_mtu;
-+ netdev_update_features(netdev);
-+ }
-+
-+ return 0;
-+}
-+
-+/* edma_set_mac()
-+ * Change the Ethernet Address of the NIC
-+ */
-+int edma_set_mac_addr(struct net_device *netdev, void *p)
-+{
-+ struct sockaddr *addr = p;
-+
-+ if (!is_valid_ether_addr(addr->sa_data))
-+ return -EINVAL;
-+
-+ if (netif_running(netdev))
-+ return -EBUSY;
-+
-+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-+ return 0;
-+}
-+
-+/* edma_set_stp_rstp()
-+ * set stp/rstp
-+ */
-+void edma_set_stp_rstp(bool rstp)
-+{
-+ edma_stp_rstp = rstp;
-+}
-+
-+/* edma_assign_ath_hdr_type()
-+ * assign atheros header eth type
-+ */
-+void edma_assign_ath_hdr_type(int eth_type)
-+{
-+ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
-+}
-+
-+/* edma_get_default_vlan_tag()
-+ * Used by other modules to get the default vlan tag
-+ */
-+int edma_get_default_vlan_tag(struct net_device *netdev)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+ if (adapter->default_vlan_tag)
-+ return adapter->default_vlan_tag;
-+
-+ return 0;
-+}
-+
-+/* edma_open()
-+ * gets called when netdevice is up, start the queue.
-+ */
-+int edma_open(struct net_device *netdev)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+ struct platform_device *pdev = adapter->edma_cinfo->pdev;
-+
-+ netif_tx_start_all_queues(netdev);
-+ edma_initialise_rfs_flow_table(adapter);
-+ set_bit(__EDMA_UP, &adapter->state_flags);
-+
-+ /* if Link polling is enabled, in our case enabled for WAN, then
-+ * do a phy start, else always set link as UP
-+ */
-+ if (adapter->poll_required) {
-+ if (!IS_ERR(adapter->phydev)) {
-+ phy_start(adapter->phydev);
-+ phy_start_aneg(adapter->phydev);
-+ adapter->link_state = __EDMA_LINKDOWN;
-+ } else {
-+ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
-+ }
-+ } else {
-+ adapter->link_state = __EDMA_LINKUP;
-+ netif_carrier_on(netdev);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/* edma_close()
-+ * gets called when netdevice is down, stops the queue.
-+ */
-+int edma_close(struct net_device *netdev)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+ edma_free_rfs_flow_table(adapter);
-+ netif_carrier_off(netdev);
-+ netif_tx_stop_all_queues(netdev);
-+
-+ if (adapter->poll_required) {
-+ if (!IS_ERR(adapter->phydev))
-+ phy_stop(adapter->phydev);
-+ }
-+
-+ adapter->link_state = __EDMA_LINKDOWN;
-+
-+ /* Set GMAC state to UP before link state is checked
-+ */
-+ clear_bit(__EDMA_UP, &adapter->state_flags);
-+
-+ return 0;
-+}
-+
-+/* edma_poll
-+ * polling function that gets called when the napi gets scheduled.
-+ *
-+ * Main sequence of task performed in this api
-+ * is clear irq status -> clear_tx_irq -> clean_rx_irq->
-+ * enable interrupts.
-+ */
-+int edma_poll(struct napi_struct *napi, int budget)
-+{
-+ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
-+ struct edma_per_cpu_queues_info, napi);
-+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
-+ u32 reg_data;
-+ u32 shadow_rx_status, shadow_tx_status;
-+ int queue_id;
-+ int i, work_done = 0;
-+
-+ /* Store the Rx/Tx status by ANDing it with
-+ * appropriate CPU RX?TX mask
-+ */
-+ edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
-+ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
-+ shadow_rx_status = edma_percpu_info->rx_status;
-+ edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
-+ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
-+ shadow_tx_status = edma_percpu_info->tx_status;
-+
-+ /* Every core will have a start, which will be computed
-+ * in probe and stored in edma_percpu_info->tx_start variable.
-+ * We will shift the status bit by tx_start to obtain
-+ * status bits for the core on which the current processing
-+ * is happening. Since, there are 4 tx queues per core,
-+ * we will run the loop till we get the correct queue to clear.
-+ */
-+ while (edma_percpu_info->tx_status) {
-+ queue_id = ffs(edma_percpu_info->tx_status) - 1;
-+ edma_tx_complete(edma_cinfo, queue_id);
-+ edma_percpu_info->tx_status &= ~(1 << queue_id);
-+ }
-+
-+ /* Every core will have a start, which will be computed
-+ * in probe and stored in edma_percpu_info->tx_start variable.
-+ * We will shift the status bit by tx_start to obtain
-+ * status bits for the core on which the current processing
-+ * is happening. Since, there are 4 tx queues per core, we
-+ * will run the loop till we get the correct queue to clear.
-+ */
-+ while (edma_percpu_info->rx_status) {
-+ queue_id = ffs(edma_percpu_info->rx_status) - 1;
-+ edma_rx_complete(edma_cinfo, &work_done,
-+ budget, queue_id, napi);
-+
-+ if (likely(work_done < budget))
-+ edma_percpu_info->rx_status &= ~(1 << queue_id);
-+ else
-+ break;
-+ }
-+
-+ /* Clear the status register, to avoid the interrupts to
-+ * reoccur.This clearing of interrupt status register is
-+ * done here as writing to status register only takes place
-+ * once the producer/consumer index has been updated to
-+ * reflect that the packet transmission/reception went fine.
-+ */
-+ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
-+ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
-+
-+ /* If budget not fully consumed, exit the polling mode */
-+ if (likely(work_done < budget)) {
-+ napi_complete(napi);
-+
-+ /* re-enable the interrupts */
-+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
-+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
-+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
-+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
-+ }
-+
-+ return work_done;
-+}
-+
-+/* edma interrupt()
-+ * interrupt handler
-+ */
-+irqreturn_t edma_interrupt(int irq, void *dev)
-+{
-+ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
-+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
-+ int i;
-+
-+ /* Unmask the TX/RX interrupt register */
-+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
-+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
-+
-+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
-+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
-+
-+ napi_schedule(&edma_percpu_info->napi);
-+
-+ return IRQ_HANDLED;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
-@@ -0,0 +1,447 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _EDMA_H_
-+#define _EDMA_H_
-+
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/module.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/io.h>
-+#include <linux/vmalloc.h>
-+#include <linux/pagemap.h>
-+#include <linux/smp.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/sysctl.h>
-+#include <linux/phy.h>
-+#include <linux/of_net.h>
-+#include <net/checksum.h>
-+#include <net/ip6_checksum.h>
-+#include <asm-generic/bug.h>
-+#include "ess_edma.h"
-+
-+#define EDMA_CPU_CORES_SUPPORTED 4
-+#define EDMA_MAX_PORTID_SUPPORTED 5
-+#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED
-+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
-+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */
-+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
-+
-+#define EDMA_MAX_RECEIVE_QUEUE 8
-+#define EDMA_MAX_TRANSMIT_QUEUE 16
-+
-+/* WAN/LAN adapter number */
-+#define EDMA_WAN 0
-+#define EDMA_LAN 1
-+
-+/* VLAN tag */
-+#define EDMA_LAN_DEFAULT_VLAN 1
-+#define EDMA_WAN_DEFAULT_VLAN 2
-+
-+#define EDMA_DEFAULT_GROUP1_VLAN 1
-+#define EDMA_DEFAULT_GROUP2_VLAN 2
-+#define EDMA_DEFAULT_GROUP3_VLAN 3
-+#define EDMA_DEFAULT_GROUP4_VLAN 4
-+#define EDMA_DEFAULT_GROUP5_VLAN 5
-+
-+/* Queues exposed to linux kernel */
-+#define EDMA_NETDEV_TX_QUEUE 4
-+#define EDMA_NETDEV_RX_QUEUE 4
-+
-+/* Number of queues per core */
-+#define EDMA_NUM_TXQ_PER_CORE 4
-+#define EDMA_NUM_RXQ_PER_CORE 2
-+
-+#define EDMA_TPD_EOP_SHIFT 31
-+
-+#define EDMA_PORT_ID_SHIFT 12
-+#define EDMA_PORT_ID_MASK 0x7
-+
-+/* tpd word 3 bit 18-28 */
-+#define EDMA_TPD_PORT_BITMAP_SHIFT 18
-+
-+#define EDMA_TPD_FROM_CPU_SHIFT 25
-+
-+#define EDMA_FROM_CPU_MASK 0x80
-+#define EDMA_SKB_PRIORITY_MASK 0x38
-+
-+/* TX/RX descriptor ring count */
-+/* should be a power of 2 */
-+#define EDMA_RX_RING_SIZE 128
-+#define EDMA_TX_RING_SIZE 128
-+
-+/* Flags used in paged/non paged mode */
-+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
-+#define EDMA_RX_HEAD_BUFF_SIZE 1540
-+
-+/* MAX frame size supported by switch */
-+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
-+
-+/* Configurations */
-+#define EDMA_INTR_CLEAR_TYPE 0
-+#define EDMA_INTR_SW_IDX_W_TYPE 0
-+#define EDMA_FIFO_THRESH_TYPE 0
-+#define EDMA_RSS_TYPE 0
-+#define EDMA_RX_IMT 0x0020
-+#define EDMA_TX_IMT 0x0050
-+#define EDMA_TPD_BURST 5
-+#define EDMA_TXF_BURST 0x100
-+#define EDMA_RFD_BURST 8
-+#define EDMA_RFD_THR 16
-+#define EDMA_RFD_LTHR 0
-+
-+/* RX/TX per CPU based mask/shift */
-+#define EDMA_TX_PER_CPU_MASK 0xF
-+#define EDMA_RX_PER_CPU_MASK 0x3
-+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
-+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
-+#define EDMA_TX_CPU_START_SHIFT 0x2
-+#define EDMA_RX_CPU_START_SHIFT 0x1
-+
-+/* FLags used in transmit direction */
-+#define EDMA_HW_CHECKSUM 0x00000001
-+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
-+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
-+
-+#define EDMA_SW_DESC_FLAG_LAST 0x1
-+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
-+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
-+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
-+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
-+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
-+
-+
-+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
-+
-+/* Ethtool specific list of EDMA supported features */
-+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
-+ | SUPPORTED_10baseT_Full \
-+ | SUPPORTED_100baseT_Half \
-+ | SUPPORTED_100baseT_Full \
-+ | SUPPORTED_1000baseT_Full)
-+
-+/* Recevie side atheros Header */
-+#define EDMA_RX_ATH_HDR_VERSION 0x2
-+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
-+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
-+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
-+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
-+
-+/* Transmit side atheros Header */
-+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
-+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
-+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
-+
-+#define EDMA_TXQ_START_CORE0 8
-+#define EDMA_TXQ_START_CORE1 12
-+#define EDMA_TXQ_START_CORE2 0
-+#define EDMA_TXQ_START_CORE3 4
-+
-+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
-+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
-+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
-+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
-+
-+#define EDMA_ETH_HDR_LEN 12
-+#define EDMA_ETH_TYPE_MASK 0xFFFF
-+
-+#define EDMA_RX_BUFFER_WRITE 16
-+#define EDMA_RFD_AVAIL_THR 80
-+
-+#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR
-+
-+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
-+ __be16 sport, __be16 dport,
-+ uint8_t proto, u16 loadbalance, bool action);
-+struct edma_ethtool_statistics {
-+ u32 tx_q0_pkt;
-+ u32 tx_q1_pkt;
-+ u32 tx_q2_pkt;
-+ u32 tx_q3_pkt;
-+ u32 tx_q4_pkt;
-+ u32 tx_q5_pkt;
-+ u32 tx_q6_pkt;
-+ u32 tx_q7_pkt;
-+ u32 tx_q8_pkt;
-+ u32 tx_q9_pkt;
-+ u32 tx_q10_pkt;
-+ u32 tx_q11_pkt;
-+ u32 tx_q12_pkt;
-+ u32 tx_q13_pkt;
-+ u32 tx_q14_pkt;
-+ u32 tx_q15_pkt;
-+ u32 tx_q0_byte;
-+ u32 tx_q1_byte;
-+ u32 tx_q2_byte;
-+ u32 tx_q3_byte;
-+ u32 tx_q4_byte;
-+ u32 tx_q5_byte;
-+ u32 tx_q6_byte;
-+ u32 tx_q7_byte;
-+ u32 tx_q8_byte;
-+ u32 tx_q9_byte;
-+ u32 tx_q10_byte;
-+ u32 tx_q11_byte;
-+ u32 tx_q12_byte;
-+ u32 tx_q13_byte;
-+ u32 tx_q14_byte;
-+ u32 tx_q15_byte;
-+ u32 rx_q0_pkt;
-+ u32 rx_q1_pkt;
-+ u32 rx_q2_pkt;
-+ u32 rx_q3_pkt;
-+ u32 rx_q4_pkt;
-+ u32 rx_q5_pkt;
-+ u32 rx_q6_pkt;
-+ u32 rx_q7_pkt;
-+ u32 rx_q0_byte;
-+ u32 rx_q1_byte;
-+ u32 rx_q2_byte;
-+ u32 rx_q3_byte;
-+ u32 rx_q4_byte;
-+ u32 rx_q5_byte;
-+ u32 rx_q6_byte;
-+ u32 rx_q7_byte;
-+ u32 tx_desc_error;
-+};
-+
-+struct edma_mdio_data {
-+ struct mii_bus *mii_bus;
-+ void __iomem *membase;
-+ int phy_irq[PHY_MAX_ADDR];
-+};
-+
-+/* EDMA LINK state */
-+enum edma_link_state {
-+ __EDMA_LINKUP, /* Indicate link is UP */
-+ __EDMA_LINKDOWN /* Indicate link is down */
-+};
-+
-+/* EDMA GMAC state */
-+enum edma_gmac_state {
-+ __EDMA_UP /* use to indicate GMAC is up */
-+};
-+
-+/* edma transmit descriptor */
-+struct edma_tx_desc {
-+ __le16 len; /* full packet including CRC */
-+ __le16 svlan_tag; /* vlan tag */
-+ __le32 word1; /* byte 4-7 */
-+ __le32 addr; /* address of buffer */
-+ __le32 word3; /* byte 12 */
-+};
-+
-+/* edma receive return descriptor */
-+struct edma_rx_return_desc {
-+ u16 rrd0;
-+ u16 rrd1;
-+ u16 rrd2;
-+ u16 rrd3;
-+ u16 rrd4;
-+ u16 rrd5;
-+ u16 rrd6;
-+ u16 rrd7;
-+};
-+
-+/* RFD descriptor */
-+struct edma_rx_free_desc {
-+ __le32 buffer_addr; /* buffer address */
-+};
-+
-+/* edma hw specific data */
-+struct edma_hw {
-+ u32 __iomem *hw_addr; /* inner register address */
-+ struct edma_adapter *adapter; /* netdevice adapter */
-+ u32 rx_intr_mask; /*rx interrupt mask */
-+ u32 tx_intr_mask; /* tx interrupt nask */
-+ u32 misc_intr_mask; /* misc interrupt mask */
-+ u32 wol_intr_mask; /* wake on lan interrupt mask */
-+ bool intr_clear_type; /* interrupt clear */
-+ bool intr_sw_idx_w; /* interrupt software index */
-+ u32 rx_head_buff_size; /* Rx buffer size */
-+ u8 rss_type; /* rss protocol type */
-+};
-+
-+/* edma_sw_desc stores software descriptor
-+ * SW descriptor has 1:1 map with HW descriptor
-+ */
-+struct edma_sw_desc {
-+ struct sk_buff *skb;
-+ dma_addr_t dma; /* dma address */
-+ u16 length; /* Tx/Rx buffer length */
-+ u32 flags;
-+};
-+
-+/* per core related information */
-+struct edma_per_cpu_queues_info {
-+ struct napi_struct napi; /* napi associated with the core */
-+ u32 tx_mask; /* tx interrupt mask */
-+ u32 rx_mask; /* rx interrupt mask */
-+ u32 tx_status; /* tx interrupt status */
-+ u32 rx_status; /* rx interrupt status */
-+ u32 tx_start; /* tx queue start */
-+ u32 rx_start; /* rx queue start */
-+ struct edma_common_info *edma_cinfo; /* edma common info */
-+};
-+
-+/* edma specific common info */
-+struct edma_common_info {
-+ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
-+ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
-+ struct platform_device *pdev; /* device structure */
-+ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
-+ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
-+ struct ctl_table_header *edma_ctl_table_hdr;
-+ int num_gmac;
-+ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
-+ int num_rx_queues; /* number of rx queue */
-+ u32 num_tx_queues; /* number of tx queue */
-+ u32 tx_irq[16]; /* number of tx irq */
-+ u32 rx_irq[8]; /* number of rx irq */
-+ u32 from_cpu; /* from CPU TPD field */
-+ u32 num_rxq_per_core; /* Rx queues per core */
-+ u32 num_txq_per_core; /* Tx queues per core */
-+ u16 tx_ring_count; /* Tx ring count */
-+ u16 rx_ring_count; /* Rx ring*/
-+ u16 rx_head_buffer_len; /* rx buffer length */
-+ u16 rx_page_buffer_len; /* rx buffer length */
-+ u32 page_mode; /* Jumbo frame supported flag */
-+ u32 fraglist_mode; /* fraglist supported flag */
-+ struct edma_hw hw; /* edma hw specific structure */
-+ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
-+ spinlock_t stats_lock; /* protect edma stats area for updation */
-+};
-+
-+/* transimit packet descriptor (tpd) ring */
-+struct edma_tx_desc_ring {
-+ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
-+ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
-+ /* Array of netdevs associated with the tpd ring */
-+ void *hw_desc; /* descriptor ring virtual address */
-+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */
-+ int netdev_bmp; /* Bitmap for per-ring netdevs */
-+ u32 size; /* descriptor ring length in bytes */
-+ u16 count; /* number of descriptors in the ring */
-+ dma_addr_t dma; /* descriptor ring physical address */
-+ u16 sw_next_to_fill; /* next Tx descriptor to fill */
-+ u16 sw_next_to_clean; /* next Tx descriptor to clean */
-+};
-+
-+/* receive free descriptor (rfd) ring */
-+struct edma_rfd_desc_ring {
-+ void *hw_desc; /* descriptor ring virtual address */
-+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */
-+ u16 size; /* bytes allocated to sw_desc */
-+ u16 count; /* number of descriptors in the ring */
-+ dma_addr_t dma; /* descriptor ring physical address */
-+ u16 sw_next_to_fill; /* next descriptor to fill */
-+ u16 sw_next_to_clean; /* next descriptor to clean */
-+};
-+
-+/* edma_rfs_flter_node - rfs filter node in hash table */
-+struct edma_rfs_filter_node {
-+ struct flow_keys keys;
-+ u32 flow_id; /* flow_id of filter provided by kernel */
-+ u16 filter_id; /* filter id of filter returned by adaptor */
-+ u16 rq_id; /* desired rq index */
-+ struct hlist_node node; /* edma rfs list node */
-+};
-+
-+/* edma_rfs_flow_tbl - rfs flow table */
-+struct edma_rfs_flow_table {
-+ u16 max_num_filter; /* Maximum number of filters edma supports */
-+ u16 hashtoclean; /* hash table index to clean next */
-+ int filter_available; /* Number of free filters available */
-+ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
-+ spinlock_t rfs_ftab_lock;
-+ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
-+};
-+
-+/* EDMA net device structure */
-+struct edma_adapter {
-+ struct net_device *netdev; /* netdevice */
-+ struct platform_device *pdev; /* platform device */
-+ struct edma_common_info *edma_cinfo; /* edma common info */
-+ struct phy_device *phydev; /* Phy device */
-+ struct edma_rfs_flow_table rfs; /* edma rfs flow table */
-+ struct net_device_stats stats; /* netdev statistics */
-+ set_rfs_filter_callback_t set_rfs_rule;
-+ u32 flags;/* status flags */
-+ unsigned long state_flags; /* GMAC up/down flags */
-+ u32 forced_speed; /* link force speed */
-+ u32 forced_duplex; /* link force duplex */
-+ u32 link_state; /* phy link state */
-+ u32 phy_mdio_addr; /* PHY device address on MII interface */
-+ u32 poll_required; /* check if link polling is required */
-+ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
-+ u32 default_vlan_tag; /* vlan tag */
-+ u32 dp_bitmap;
-+ uint8_t phy_id[MII_BUS_ID_SIZE + 3];
-+};
-+
-+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
-+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
-+int edma_open(struct net_device *netdev);
-+int edma_close(struct net_device *netdev);
-+void edma_free_tx_resources(struct edma_common_info *edma_c_info);
-+void edma_free_rx_resources(struct edma_common_info *edma_c_info);
-+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
-+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
-+void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
-+void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
-+void edma_free_queues(struct edma_common_info *edma_cinfo);
-+void edma_irq_disable(struct edma_common_info *edma_cinfo);
-+int edma_reset(struct edma_common_info *edma_cinfo);
-+int edma_poll(struct napi_struct *napi, int budget);
-+netdev_tx_t edma_xmit(struct sk_buff *skb,
-+ struct net_device *netdev);
-+int edma_configure(struct edma_common_info *edma_cinfo);
-+void edma_irq_enable(struct edma_common_info *edma_cinfo);
-+void edma_enable_tx_ctrl(struct edma_hw *hw);
-+void edma_enable_rx_ctrl(struct edma_hw *hw);
-+void edma_stop_rx_tx(struct edma_hw *hw);
-+void edma_free_irqs(struct edma_adapter *adapter);
-+irqreturn_t edma_interrupt(int irq, void *dev);
-+void edma_write_reg(u16 reg_addr, u32 reg_value);
-+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
-+struct net_device_stats *edma_get_stats(struct net_device *netdev);
-+int edma_set_mac_addr(struct net_device *netdev, void *p);
-+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
-+ u16 rxq, u32 flow_id);
-+int edma_register_rfs_filter(struct net_device *netdev,
-+ set_rfs_filter_callback_t set_filter);
-+void edma_flow_may_expire(unsigned long data);
-+void edma_set_ethtool_ops(struct net_device *netdev);
-+int edma_change_mtu(struct net_device *netdev, int new_mtu);
-+void edma_set_stp_rstp(bool tag);
-+void edma_assign_ath_hdr_type(int tag);
-+int edma_get_default_vlan_tag(struct net_device *netdev);
-+void edma_adjust_link(struct net_device *netdev);
-+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
-+void edma_read_append_stats(struct edma_common_info *edma_cinfo);
-+void edma_change_tx_coalesce(int usecs);
-+void edma_change_rx_coalesce(int usecs);
-+void edma_get_tx_rx_coalesce(u32 *reg_val);
-+void edma_clear_irq_status(void);
-+#endif /* _EDMA_H_ */
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
-@@ -0,0 +1,1220 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/cpu_rmap.h>
-+#include <linux/of.h>
-+#include <linux/of_net.h>
-+#include <linux/timer.h>
-+#include "edma.h"
-+#include "ess_edma.h"
-+
-+/* Weight round robin and virtual QID mask */
-+#define EDMA_WRR_VID_SCTL_MASK 0xffff
-+
-+/* Weight round robin and virtual QID shift */
-+#define EDMA_WRR_VID_SCTL_SHIFT 16
-+
-+char edma_axi_driver_name[] = "ess_edma";
-+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
-+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
-+
-+static u32 edma_hw_addr;
-+
-+struct timer_list edma_stats_timer;
-+
-+char edma_tx_irq[16][64];
-+char edma_rx_irq[8][64];
-+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
-+ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
-+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
-+ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
-+
-+static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN;
-+static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN;
-+static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
-+static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
-+static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
-+static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
-+static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
-+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
-+static u32 edma_rss_idt_idx;
-+
-+static int edma_weight_assigned_to_q __read_mostly;
-+static int edma_queue_to_virtual_q __read_mostly;
-+static bool edma_enable_rstp __read_mostly;
-+static int edma_athr_hdr_eth_type __read_mostly;
-+
-+static int page_mode;
-+module_param(page_mode, int, 0);
-+MODULE_PARM_DESC(page_mode, "enable page mode");
-+
-+static int overwrite_mode;
-+module_param(overwrite_mode, int, 0);
-+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
-+
-+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
-+module_param(jumbo_mru, int, 0);
-+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
-+
-+static int num_rxq = 4;
-+module_param(num_rxq, int, 0);
-+MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
-+
-+void edma_write_reg(u16 reg_addr, u32 reg_value)
-+{
-+ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
-+}
-+
-+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
-+{
-+ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
-+}
-+
-+/* edma_change_tx_coalesce()
-+ * change tx interrupt moderation timer
-+ */
-+void edma_change_tx_coalesce(int usecs)
-+{
-+ u32 reg_value;
-+
-+ /* Here, we right shift the value from the user by 1, this is
-+ * done because IMT resolution timer is 2usecs. 1 count
-+ * of this register corresponds to 2 usecs.
-+ */
-+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
-+ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
-+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-+}
-+
-+/* edma_change_rx_coalesce()
-+ * change rx interrupt moderation timer
-+ */
-+void edma_change_rx_coalesce(int usecs)
-+{
-+ u32 reg_value;
-+
-+ /* Here, we right shift the value from the user by 1, this is
-+ * done because IMT resolution timer is 2usecs. 1 count
-+ * of this register corresponds to 2 usecs.
-+ */
-+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
-+ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
-+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-+}
-+
-+/* edma_get_tx_rx_coalesce()
-+ * Get tx/rx interrupt moderation value
-+ */
-+void edma_get_tx_rx_coalesce(u32 *reg_val)
-+{
-+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
-+}
-+
-+void edma_read_append_stats(struct edma_common_info *edma_cinfo)
-+{
-+ uint32_t *p;
-+ int i;
-+ u32 stat;
-+
-+ spin_lock(&edma_cinfo->stats_lock);
-+ p = (uint32_t *)&(edma_cinfo->edma_ethstats);
-+
-+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
-+ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
-+ *p += stat;
-+ p++;
-+ }
-+
-+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
-+ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
-+ *p += stat;
-+ p++;
-+ }
-+
-+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
-+ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
-+ *p += stat;
-+ p++;
-+ }
-+
-+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
-+ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
-+ *p += stat;
-+ p++;
-+ }
-+
-+ spin_unlock(&edma_cinfo->stats_lock);
-+}
-+
-+static void edma_statistics_timer(unsigned long data)
-+{
-+ struct edma_common_info *edma_cinfo = (struct edma_common_info *)data;
-+
-+ edma_read_append_stats(edma_cinfo);
-+
-+ mod_timer(&edma_stats_timer, jiffies + 1*HZ);
-+}
-+
-+static int edma_enable_stp_rstp(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ int ret;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+ if (write)
-+ edma_set_stp_rstp(edma_enable_rstp);
-+
-+ return ret;
-+}
-+
-+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ int ret;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+ if (write)
-+ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
-+
-+ return ret;
-+}
-+
-+static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ int ret;
-+
-+ if (!edma_netdev[1]) {
-+ pr_err("Netdevice for default_lan does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[1]);
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_ltag;
-+
-+ return ret;
-+}
-+
-+static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ int ret;
-+
-+ if (!edma_netdev[0]) {
-+ pr_err("Netdevice for default_wan does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[0]);
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_wtag;
-+
-+ return ret;
-+}
-+
-+static int edma_change_group1_vtag(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ struct edma_common_info *edma_cinfo;
-+ int ret;
-+
-+ if (!edma_netdev[0]) {
-+ pr_err("Netdevice for Group 1 does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[0]);
-+ edma_cinfo = adapter->edma_cinfo;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_group1_vtag;
-+
-+ return ret;
-+}
-+
-+static int edma_change_group2_vtag(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ struct edma_common_info *edma_cinfo;
-+ int ret;
-+
-+ if (!edma_netdev[1]) {
-+ pr_err("Netdevice for Group 2 does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[1]);
-+ edma_cinfo = adapter->edma_cinfo;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_group2_vtag;
-+
-+ return ret;
-+}
-+
-+static int edma_change_group3_vtag(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ struct edma_common_info *edma_cinfo;
-+ int ret;
-+
-+ if (!edma_netdev[2]) {
-+ pr_err("Netdevice for Group 3 does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[2]);
-+ edma_cinfo = adapter->edma_cinfo;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_group3_vtag;
-+
-+ return ret;
-+}
-+
-+static int edma_change_group4_vtag(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ struct edma_common_info *edma_cinfo;
-+ int ret;
-+
-+ if (!edma_netdev[3]) {
-+ pr_err("Netdevice for Group 4 does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[3]);
-+ edma_cinfo = adapter->edma_cinfo;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_group4_vtag;
-+
-+ return ret;
-+}
-+
-+static int edma_change_group5_vtag(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ struct edma_adapter *adapter;
-+ struct edma_common_info *edma_cinfo;
-+ int ret;
-+
-+ if (!edma_netdev[4]) {
-+ pr_err("Netdevice for Group 5 does not exist\n");
-+ return -1;
-+ }
-+
-+ adapter = netdev_priv(edma_netdev[4]);
-+ edma_cinfo = adapter->edma_cinfo;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+
-+ if (write)
-+ adapter->default_vlan_tag = edma_default_group5_vtag;
-+
-+ return ret;
-+}
-+
-+static int edma_set_rss_idt_value(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ int ret;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+ if (write && !ret)
-+ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
-+ edma_rss_idt_val);
-+ return ret;
-+}
-+
-+static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ int ret;
-+ u32 old_value = edma_rss_idt_idx;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+ if (!write || ret)
-+ return ret;
-+
-+ if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
-+ pr_err("Invalid RSS indirection table index %d\n",
-+ edma_rss_idt_idx);
-+ edma_rss_idt_idx = old_value;
-+ return -EINVAL;
-+ }
-+ return ret;
-+}
-+
-+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ int ret, queue_id, weight;
-+ u32 reg_data, data, reg_addr;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+ if (write) {
-+ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
-+ if (queue_id < 0 || queue_id > 15) {
-+ pr_err("queue_id not within desired range\n");
-+ return -EINVAL;
-+ }
-+
-+ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
-+ if (weight < 0 || weight > 0xF) {
-+ pr_err("queue_id not within desired range\n");
-+ return -EINVAL;
-+ }
-+
-+ data = weight << EDMA_WRR_SHIFT(queue_id);
-+
-+ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
-+ edma_read_reg(reg_addr, &reg_data);
-+ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
-+ edma_write_reg(reg_addr, data | reg_data);
-+ }
-+
-+ return ret;
-+}
-+
-+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
-+ void __user *buffer, size_t *lenp,
-+ loff_t *ppos)
-+{
-+ int ret, queue_id, virtual_qid;
-+ u32 reg_data, data, reg_addr;
-+
-+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
-+ if (write) {
-+ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
-+ if (queue_id < 0 || queue_id > 15) {
-+ pr_err("queue_id not within desired range\n");
-+ return -EINVAL;
-+ }
-+
-+ virtual_qid = edma_queue_to_virtual_q >>
-+ EDMA_WRR_VID_SCTL_SHIFT;
-+ if (virtual_qid < 0 || virtual_qid > 8) {
-+ pr_err("queue_id not within desired range\n");
-+ return -EINVAL;
-+ }
-+
-+ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
-+
-+ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
-+ edma_read_reg(reg_addr, &reg_data);
-+ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
-+ edma_write_reg(reg_addr, data | reg_data);
-+ }
-+
-+ return ret;
-+}
-+
-+static struct ctl_table edma_table[] = {
-+ {
-+ .procname = "default_lan_tag",
-+ .data = &edma_default_ltag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_default_lan_vlan
-+ },
-+ {
-+ .procname = "default_wan_tag",
-+ .data = &edma_default_wtag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_default_wan_vlan
-+ },
-+ {
-+ .procname = "weight_assigned_to_queues",
-+ .data = &edma_weight_assigned_to_q,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_weight_assigned_to_queues
-+ },
-+ {
-+ .procname = "queue_to_virtual_queue_map",
-+ .data = &edma_queue_to_virtual_q,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_queue_to_virtual_queue_map
-+ },
-+ {
-+ .procname = "enable_stp_rstp",
-+ .data = &edma_enable_rstp,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_enable_stp_rstp
-+ },
-+ {
-+ .procname = "athr_hdr_eth_type",
-+ .data = &edma_athr_hdr_eth_type,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_ath_hdr_eth_type
-+ },
-+ {
-+ .procname = "default_group1_vlan_tag",
-+ .data = &edma_default_group1_vtag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_group1_vtag
-+ },
-+ {
-+ .procname = "default_group2_vlan_tag",
-+ .data = &edma_default_group2_vtag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_group2_vtag
-+ },
-+ {
-+ .procname = "default_group3_vlan_tag",
-+ .data = &edma_default_group3_vtag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_group3_vtag
-+ },
-+ {
-+ .procname = "default_group4_vlan_tag",
-+ .data = &edma_default_group4_vtag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_group4_vtag
-+ },
-+ {
-+ .procname = "default_group5_vlan_tag",
-+ .data = &edma_default_group5_vtag,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_change_group5_vtag
-+ },
-+ {
-+ .procname = "edma_rss_idt_value",
-+ .data = &edma_rss_idt_val,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_set_rss_idt_value
-+ },
-+ {
-+ .procname = "edma_rss_idt_idx",
-+ .data = &edma_rss_idt_idx,
-+ .maxlen = sizeof(int),
-+ .mode = 0644,
-+ .proc_handler = edma_set_rss_idt_idx
-+ },
-+ {}
-+};
-+
-+/* edma_axi_netdev_ops
-+ * Describe the operations supported by registered netdevices
-+ *
-+ * static const struct net_device_ops edma_axi_netdev_ops = {
-+ * .ndo_open = edma_open,
-+ * .ndo_stop = edma_close,
-+ * .ndo_start_xmit = edma_xmit_frame,
-+ * .ndo_set_mac_address = edma_set_mac_addr,
-+ * }
-+ */
-+static const struct net_device_ops edma_axi_netdev_ops = {
-+ .ndo_open = edma_open,
-+ .ndo_stop = edma_close,
-+ .ndo_start_xmit = edma_xmit,
-+ .ndo_set_mac_address = edma_set_mac_addr,
-+#ifdef CONFIG_RFS_ACCEL
-+ .ndo_rx_flow_steer = edma_rx_flow_steer,
-+ .ndo_register_rfs_filter = edma_register_rfs_filter,
-+ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
-+#endif
-+ .ndo_get_stats = edma_get_stats,
-+ .ndo_change_mtu = edma_change_mtu,
-+};
-+
-+/* edma_axi_probe()
-+ * Initialise an adapter identified by a platform_device structure.
-+ *
-+ * The OS initialization, configuring of the adapter private structure,
-+ * and a hardware reset occur in the probe.
-+ */
-+static int edma_axi_probe(struct platform_device *pdev)
-+{
-+ struct edma_common_info *edma_cinfo;
-+ struct edma_hw *hw;
-+ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
-+ struct resource *res;
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *pnp;
-+ struct device_node *mdio_node = NULL;
-+ struct platform_device *mdio_plat = NULL;
-+ struct mii_bus *miibus = NULL;
-+ struct edma_mdio_data *mdio_data = NULL;
-+ int i, j, k, err = 0;
-+ int portid_bmp;
-+ int idx = 0, idx_mac = 0;
-+
-+ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
-+ dev_err(&pdev->dev, "Invalid CPU Cores\n");
-+ return -EINVAL;
-+ }
-+
-+ if ((num_rxq != 4) && (num_rxq != 8)) {
-+ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
-+ return -EINVAL;
-+ }
-+ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
-+ if (!edma_cinfo) {
-+ err = -ENOMEM;
-+ goto err_alloc;
-+ }
-+
-+ edma_cinfo->pdev = pdev;
-+
-+ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
-+ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
-+ pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
-+ err = -EINVAL;
-+ goto err_cinfo;
-+ }
-+
-+ /* Initialize the netdev array before allocation
-+ * to avoid double free
-+ */
-+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
-+ edma_netdev[i] = NULL;
-+
-+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
-+ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
-+ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
-+
-+ if (!edma_netdev[i]) {
-+ dev_err(&pdev->dev,
-+ "net device alloc fails for index=%d\n", i);
-+ err = -ENODEV;
-+ goto err_ioremap;
-+ }
-+
-+ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
-+ platform_set_drvdata(pdev, edma_netdev[i]);
-+ edma_cinfo->netdev[i] = edma_netdev[i];
-+ }
-+
-+ /* Fill ring details */
-+ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
-+ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
-+ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
-+
-+ /* Update num rx queues based on module parameter */
-+ edma_cinfo->num_rx_queues = num_rxq;
-+ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
-+
-+ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
-+
-+ hw = &edma_cinfo->hw;
-+
-+ /* Fill HW defaults */
-+ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
-+ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
-+
-+ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
-+ of_property_read_u32(np, "qcom,rx_head_buf_size",
-+ &hw->rx_head_buff_size);
-+
-+ if (overwrite_mode) {
-+ dev_info(&pdev->dev, "page mode overwritten");
-+ edma_cinfo->page_mode = page_mode;
-+ }
-+
-+ if (jumbo_mru)
-+ edma_cinfo->fraglist_mode = 1;
-+
-+ if (edma_cinfo->page_mode)
-+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
-+ else if (edma_cinfo->fraglist_mode)
-+ hw->rx_head_buff_size = jumbo_mru;
-+ else if (!hw->rx_head_buff_size)
-+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
-+
-+ hw->misc_intr_mask = 0;
-+ hw->wol_intr_mask = 0;
-+
-+ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
-+ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
-+
-+ /* configure RSS type to the different protocol that can be
-+ * supported
-+ */
-+ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
-+ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
-+ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(edma_cinfo->hw.hw_addr)) {
-+ err = PTR_ERR(edma_cinfo->hw.hw_addr);
-+ goto err_ioremap;
-+ }
-+
-+ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
-+
-+ /* Parse tx queue interrupt number from device tree */
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
-+ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
-+
-+ /* Parse rx queue interrupt number from device tree
-+ * Here we are setting j to point to the point where we
-+ * left tx interrupt parsing(i.e 16) and run run the loop
-+ * from 0 to 7 to parse rx interrupt number.
-+ */
-+ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
-+ i < edma_cinfo->num_rx_queues; i++) {
-+ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
-+ k += ((num_rxq == 4) ? 2 : 1);
-+ j += ((num_rxq == 4) ? 2 : 1);
-+ }
-+
-+ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
-+ edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
-+
-+ err = edma_alloc_queues_tx(edma_cinfo);
-+ if (err) {
-+ dev_err(&pdev->dev, "Allocation of TX queue failed\n");
-+ goto err_tx_qinit;
-+ }
-+
-+ err = edma_alloc_queues_rx(edma_cinfo);
-+ if (err) {
-+ dev_err(&pdev->dev, "Allocation of RX queue failed\n");
-+ goto err_rx_qinit;
-+ }
-+
-+ err = edma_alloc_tx_rings(edma_cinfo);
-+ if (err) {
-+ dev_err(&pdev->dev, "Allocation of TX resources failed\n");
-+ goto err_tx_rinit;
-+ }
-+
-+ err = edma_alloc_rx_rings(edma_cinfo);
-+ if (err) {
-+ dev_err(&pdev->dev, "Allocation of RX resources failed\n");
-+ goto err_rx_rinit;
-+ }
-+
-+ /* Initialize netdev and netdev bitmap for transmit descriptor rings */
-+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
-+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i];
-+ int j;
-+
-+ etdr->netdev_bmp = 0;
-+ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
-+ etdr->netdev[j] = NULL;
-+ etdr->nq[j] = NULL;
-+ }
-+ }
-+
-+ if (of_property_read_bool(np, "qcom,mdio_supported")) {
-+ mdio_node = of_find_compatible_node(NULL, NULL,
-+ "qcom,ipq4019-mdio");
-+ if (!mdio_node) {
-+ dev_err(&pdev->dev, "cannot find mdio node by phandle");
-+ err = -EIO;
-+ goto err_mdiobus_init_fail;
-+ }
-+
-+ mdio_plat = of_find_device_by_node(mdio_node);
-+ if (!mdio_plat) {
-+ dev_err(&pdev->dev,
-+ "cannot find platform device from mdio node");
-+ of_node_put(mdio_node);
-+ err = -EIO;
-+ goto err_mdiobus_init_fail;
-+ }
-+
-+ mdio_data = dev_get_drvdata(&mdio_plat->dev);
-+ if (!mdio_data) {
-+ dev_err(&pdev->dev,
-+ "cannot get mii bus reference from device data");
-+ of_node_put(mdio_node);
-+ err = -EIO;
-+ goto err_mdiobus_init_fail;
-+ }
-+
-+ miibus = mdio_data->mii_bus;
-+ }
-+
-+ for_each_available_child_of_node(np, pnp) {
-+ const char *mac_addr;
-+
-+ /* this check is needed if parent and daughter dts have
-+ * different number of gmac nodes
-+ */
-+ if (idx_mac == edma_cinfo->num_gmac) {
-+ of_node_put(np);
-+ break;
-+ }
-+
-+ mac_addr = of_get_mac_address(pnp);
-+ if (mac_addr)
-+ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN);
-+
-+ idx_mac++;
-+ }
-+
-+ /* Populate the adapter structure register the netdevice */
-+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+ int k, m;
-+
-+ adapter[i] = netdev_priv(edma_netdev[i]);
-+ adapter[i]->netdev = edma_netdev[i];
-+ adapter[i]->pdev = pdev;
-+ for (j = 0; j < CONFIG_NR_CPUS; j++) {
-+ m = i % 2;
-+ adapter[i]->tx_start_offset[j] =
-+ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
-+ /* Share the queues with available net-devices.
-+ * For instance , with 5 net-devices
-+ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
-+ * and eth1/eth3 will get the remaining.
-+ */
-+ for (k = adapter[i]->tx_start_offset[j]; k <
-+ (adapter[i]->tx_start_offset[j] + 2); k++) {
-+ if (edma_fill_netdev(edma_cinfo, k, i, j)) {
-+ pr_err("Netdev overflow Error\n");
-+ goto err_register;
-+ }
-+ }
-+ }
-+
-+ adapter[i]->edma_cinfo = edma_cinfo;
-+ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
-+ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
-+ | NETIF_F_HW_VLAN_CTAG_TX
-+ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
-+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO;
-+ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-+ NETIF_F_HW_VLAN_CTAG_RX
-+ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
-+ NETIF_F_GRO;
-+ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
-+ NETIF_F_TSO | NETIF_F_TSO6 |
-+ NETIF_F_GRO;
-+ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
-+ NETIF_F_TSO | NETIF_F_TSO6 |
-+ NETIF_F_GRO;
-+
-+#ifdef CONFIG_RFS_ACCEL
-+ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+#endif
-+ edma_set_ethtool_ops(edma_netdev[i]);
-+
-+ /* This just fill in some default MAC address
-+ */
-+ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
-+ random_ether_addr(edma_netdev[i]->dev_addr);
-+ pr_info("EDMA using MAC@ - using");
-+ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
-+ *(edma_netdev[i]->dev_addr),
-+ *(edma_netdev[i]->dev_addr + 1),
-+ *(edma_netdev[i]->dev_addr + 2),
-+ *(edma_netdev[i]->dev_addr + 3),
-+ *(edma_netdev[i]->dev_addr + 4),
-+ *(edma_netdev[i]->dev_addr + 5));
-+ }
-+
-+ err = register_netdev(edma_netdev[i]);
-+ if (err)
-+ goto err_register;
-+
-+ /* carrier off reporting is important to
-+ * ethtool even BEFORE open
-+ */
-+ netif_carrier_off(edma_netdev[i]);
-+
-+ /* Allocate reverse irq cpu mapping structure for
-+ * receive queues
-+ */
-+#ifdef CONFIG_RFS_ACCEL
-+ edma_netdev[i]->rx_cpu_rmap =
-+ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
-+ if (!edma_netdev[i]->rx_cpu_rmap) {
-+ err = -ENOMEM;
-+ goto err_rmap_alloc_fail;
-+ }
-+#endif
-+ }
-+
-+ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
-+ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
-+
-+ for_each_available_child_of_node(np, pnp) {
-+ const uint32_t *vlan_tag = NULL;
-+ int len;
-+
-+ /* this check is needed if parent and daughter dts have
-+ * different number of gmac nodes
-+ */
-+ if (idx == edma_cinfo->num_gmac)
-+ break;
-+
-+ /* Populate port-id to netdev lookup table */
-+ vlan_tag = of_get_property(pnp, "vlan_tag", &len);
-+ if (!vlan_tag) {
-+ pr_err("Vlan tag parsing Failed.\n");
-+ goto err_rmap_alloc_fail;
-+ }
-+
-+ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
-+ vlan_tag++;
-+ portid_bmp = of_read_number(vlan_tag, 1);
-+ adapter[idx]->dp_bitmap = portid_bmp;
-+
-+ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
-+ while (portid_bmp) {
-+ int port_bit = ffs(portid_bmp);
-+
-+ if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
-+ goto err_rmap_alloc_fail;
-+ edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
-+ edma_netdev[idx];
-+ portid_bmp &= ~(1 << (port_bit - 1));
-+ }
-+
-+ if (!of_property_read_u32(pnp, "qcom,poll_required",
-+ &adapter[idx]->poll_required)) {
-+ if (adapter[idx]->poll_required) {
-+ of_property_read_u32(pnp, "qcom,phy_mdio_addr",
-+ &adapter[idx]->phy_mdio_addr);
-+ of_property_read_u32(pnp, "qcom,forced_speed",
-+ &adapter[idx]->forced_speed);
-+ of_property_read_u32(pnp, "qcom,forced_duplex",
-+ &adapter[idx]->forced_duplex);
-+
-+ /* create a phyid using MDIO bus id
-+ * and MDIO bus address
-+ */
-+ snprintf(adapter[idx]->phy_id,
-+ MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-+ miibus->id,
-+ adapter[idx]->phy_mdio_addr);
-+ }
-+ } else {
-+ adapter[idx]->poll_required = 0;
-+ adapter[idx]->forced_speed = SPEED_1000;
-+ adapter[idx]->forced_duplex = DUPLEX_FULL;
-+ }
-+
-+ idx++;
-+ }
-+
-+ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
-+ "net/edma",
-+ edma_table);
-+ if (!edma_cinfo->edma_ctl_table_hdr) {
-+ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
-+ goto err_unregister_sysctl_tbl;
-+ }
-+
-+ /* Disable all 16 Tx and 8 rx irqs */
-+ edma_irq_disable(edma_cinfo);
-+
-+ err = edma_reset(edma_cinfo);
-+ if (err) {
-+ err = -EIO;
-+ goto err_reset;
-+ }
-+
-+ /* populate per_core_info, do a napi_Add, request 16 TX irqs,
-+ * 8 RX irqs, do a napi enable
-+ */
-+ for (i = 0; i < CONFIG_NR_CPUS; i++) {
-+ u8 rx_start;
-+
-+ edma_cinfo->edma_percpu_info[i].napi.state = 0;
-+
-+ netif_napi_add(edma_netdev[0],
-+ &edma_cinfo->edma_percpu_info[i].napi,
-+ edma_poll, 64);
-+ napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
-+ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
-+ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
-+ << (i << EDMA_RX_PER_CPU_MASK_SHIFT);
-+ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
-+ edma_cinfo->edma_percpu_info[i].rx_start =
-+ i << EDMA_RX_CPU_START_SHIFT;
-+ rx_start = i << EDMA_RX_CPU_START_SHIFT;
-+ edma_cinfo->edma_percpu_info[i].tx_status = 0;
-+ edma_cinfo->edma_percpu_info[i].rx_status = 0;
-+ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
-+
-+ /* Request irq per core */
-+ for (j = edma_cinfo->edma_percpu_info[i].tx_start;
-+ j < tx_start[i] + 4; j++) {
-+ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
-+ err = request_irq(edma_cinfo->tx_irq[j],
-+ edma_interrupt,
-+ 0,
-+ &edma_tx_irq[j][0],
-+ &edma_cinfo->edma_percpu_info[i]);
-+ if (err)
-+ goto err_reset;
-+ }
-+
-+ for (j = edma_cinfo->edma_percpu_info[i].rx_start;
-+ j < (rx_start +
-+ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
-+ j++) {
-+ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
-+ err = request_irq(edma_cinfo->rx_irq[j],
-+ edma_interrupt,
-+ 0,
-+ &edma_rx_irq[j][0],
-+ &edma_cinfo->edma_percpu_info[i]);
-+ if (err)
-+ goto err_reset;
-+ }
-+
-+#ifdef CONFIG_RFS_ACCEL
-+ for (j = edma_cinfo->edma_percpu_info[i].rx_start;
-+ j < rx_start + 2; j += 2) {
-+ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
-+ edma_cinfo->rx_irq[j]);
-+ if (err)
-+ goto err_rmap_add_fail;
-+ }
-+#endif
-+ }
-+
-+ /* Used to clear interrupt status, allocate rx buffer,
-+ * configure edma descriptors registers
-+ */
-+ err = edma_configure(edma_cinfo);
-+ if (err) {
-+ err = -EIO;
-+ goto err_configure;
-+ }
-+
-+ /* Configure RSS indirection table.
-+ * 128 hash will be configured in the following
-+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
-+ * and so on
-+ */
-+ for (i = 0; i < EDMA_NUM_IDT; i++)
-+ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
-+
-+ /* Configure load balance mapping table.
-+ * 4 table entry will be configured according to the
-+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
-+ * respectively.
-+ */
-+ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
-+
-+ /* Configure Virtual queue for Tx rings
-+ * User can also change this value runtime through
-+ * a sysctl
-+ */
-+ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
-+ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
-+
-+ /* Configure Max AXI Burst write size to 128 bytes*/
-+ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
-+ EDMA_AXIW_MAXWRSIZE_VALUE);
-+
-+ /* Enable All 16 tx and 8 rx irq mask */
-+ edma_irq_enable(edma_cinfo);
-+ edma_enable_tx_ctrl(&edma_cinfo->hw);
-+ edma_enable_rx_ctrl(&edma_cinfo->hw);
-+
-+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+ if (adapter[i]->poll_required) {
-+ adapter[i]->phydev =
-+ phy_connect(edma_netdev[i],
-+ (const char *)adapter[i]->phy_id,
-+ &edma_adjust_link,
-+ PHY_INTERFACE_MODE_SGMII);
-+ if (IS_ERR(adapter[i]->phydev)) {
-+ dev_dbg(&pdev->dev, "PHY attach FAIL");
-+ err = -EIO;
-+ goto edma_phy_attach_fail;
-+ } else {
-+ adapter[i]->phydev->advertising |=
-+ ADVERTISED_Pause |
-+ ADVERTISED_Asym_Pause;
-+ adapter[i]->phydev->supported |=
-+ SUPPORTED_Pause |
-+ SUPPORTED_Asym_Pause;
-+ }
-+ } else {
-+ adapter[i]->phydev = NULL;
-+ }
-+ }
-+
-+ spin_lock_init(&edma_cinfo->stats_lock);
-+
-+ init_timer(&edma_stats_timer);
-+ edma_stats_timer.expires = jiffies + 1*HZ;
-+ edma_stats_timer.data = (unsigned long)edma_cinfo;
-+ edma_stats_timer.function = edma_statistics_timer; /* timer handler */
-+ add_timer(&edma_stats_timer);
-+
-+ return 0;
-+
-+edma_phy_attach_fail:
-+ miibus = NULL;
-+err_configure:
-+#ifdef CONFIG_RFS_ACCEL
-+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
-+ adapter[i]->netdev->rx_cpu_rmap = NULL;
-+ }
-+#endif
-+err_rmap_add_fail:
-+ edma_free_irqs(adapter[0]);
-+ for (i = 0; i < CONFIG_NR_CPUS; i++)
-+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-+err_reset:
-+err_unregister_sysctl_tbl:
-+err_rmap_alloc_fail:
-+ for (i = 0; i < edma_cinfo->num_gmac; i++)
-+ unregister_netdev(edma_netdev[i]);
-+err_register:
-+err_mdiobus_init_fail:
-+ edma_free_rx_rings(edma_cinfo);
-+err_rx_rinit:
-+ edma_free_tx_rings(edma_cinfo);
-+err_tx_rinit:
-+ edma_free_queues(edma_cinfo);
-+err_rx_qinit:
-+err_tx_qinit:
-+ iounmap(edma_cinfo->hw.hw_addr);
-+err_ioremap:
-+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+ if (edma_netdev[i])
-+ free_netdev(edma_netdev[i]);
-+ }
-+err_cinfo:
-+ kfree(edma_cinfo);
-+err_alloc:
-+ return err;
-+}
-+
-+/* edma_axi_remove()
-+ * Device Removal Routine
-+ *
-+ * edma_axi_remove is called by the platform subsystem to alert the driver
-+ * that it should release a platform device.
-+ */
-+static int edma_axi_remove(struct platform_device *pdev)
-+{
-+ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
-+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+ struct edma_hw *hw = &edma_cinfo->hw;
-+ int i;
-+
-+ for (i = 0; i < edma_cinfo->num_gmac; i++)
-+ unregister_netdev(edma_netdev[i]);
-+
-+ edma_stop_rx_tx(hw);
-+ for (i = 0; i < CONFIG_NR_CPUS; i++)
-+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-+
-+ edma_irq_disable(edma_cinfo);
-+ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
-+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-+#ifdef CONFIG_RFS_ACCEL
-+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
-+ edma_netdev[i]->rx_cpu_rmap = NULL;
-+ }
-+#endif
-+
-+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
-+ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
-+
-+ if (adapter->phydev)
-+ phy_disconnect(adapter->phydev);
-+ }
-+
-+ del_timer_sync(&edma_stats_timer);
-+ edma_free_irqs(adapter);
-+ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
-+ edma_free_tx_resources(edma_cinfo);
-+ edma_free_rx_resources(edma_cinfo);
-+ edma_free_tx_rings(edma_cinfo);
-+ edma_free_rx_rings(edma_cinfo);
-+ edma_free_queues(edma_cinfo);
-+ for (i = 0; i < edma_cinfo->num_gmac; i++)
-+ free_netdev(edma_netdev[i]);
-+
-+ kfree(edma_cinfo);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id edma_of_mtable[] = {
-+ {.compatible = "qcom,ess-edma" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, edma_of_mtable);
-+
-+static struct platform_driver edma_axi_driver = {
-+ .driver = {
-+ .name = edma_axi_driver_name,
-+ .of_match_table = edma_of_mtable,
-+ },
-+ .probe = edma_axi_probe,
-+ .remove = edma_axi_remove,
-+};
-+
-+module_platform_driver(edma_axi_driver);
-+
-+MODULE_AUTHOR("Qualcomm Atheros Inc");
-+MODULE_DESCRIPTION("QCA ESS EDMA driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
-@@ -0,0 +1,374 @@
-+/*
-+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#include <linux/ethtool.h>
-+#include <linux/netdevice.h>
-+#include <linux/string.h>
-+#include "edma.h"
-+
-+struct edma_ethtool_stats {
-+ uint8_t stat_string[ETH_GSTRING_LEN];
-+ uint32_t stat_offset;
-+};
-+
-+#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m)
-+#define DRVINFO_LEN 32
-+
-+/* Array of strings describing statistics
-+ */
-+static const struct edma_ethtool_stats edma_gstrings_stats[] = {
-+ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)},
-+ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)},
-+ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)},
-+ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)},
-+ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)},
-+ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)},
-+ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)},
-+ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)},
-+ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)},
-+ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)},
-+ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)},
-+ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)},
-+ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)},
-+ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)},
-+ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)},
-+ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)},
-+ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)},
-+ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)},
-+ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)},
-+ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)},
-+ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)},
-+ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)},
-+ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)},
-+ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)},
-+ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)},
-+ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)},
-+ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)},
-+ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)},
-+ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)},
-+ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)},
-+ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)},
-+ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)},
-+ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)},
-+ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)},
-+ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)},
-+ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)},
-+ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)},
-+ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)},
-+ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)},
-+ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)},
-+ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)},
-+ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)},
-+ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)},
-+ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)},
-+ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)},
-+ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)},
-+ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
-+ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
-+ {"tx_desc_error", EDMA_STAT(tx_desc_error)},
-+};
-+
-+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
-+
-+/* edma_get_strset_count()
-+ * Get strset count
-+ */
-+static int edma_get_strset_count(struct net_device *netdev,
-+ int sset)
-+{
-+ switch (sset) {
-+ case ETH_SS_STATS:
-+ return EDMA_STATS_LEN;
-+ default:
-+ netdev_dbg(netdev, "%s: Invalid string set", __func__);
-+ return -EOPNOTSUPP;
-+ }
-+}
-+
-+
-+/* edma_get_strings()
-+ * get stats string
-+ */
-+static void edma_get_strings(struct net_device *netdev, uint32_t stringset,
-+ uint8_t *data)
-+{
-+ uint8_t *p = data;
-+ uint32_t i;
-+
-+ switch (stringset) {
-+ case ETH_SS_STATS:
-+ for (i = 0; i < EDMA_STATS_LEN; i++) {
-+ memcpy(p, edma_gstrings_stats[i].stat_string,
-+ min((size_t)ETH_GSTRING_LEN,
-+ strlen(edma_gstrings_stats[i].stat_string)
-+ + 1));
-+ p += ETH_GSTRING_LEN;
-+ }
-+ break;
-+ }
-+}
-+
-+/* edma_get_ethtool_stats()
-+ * Get ethtool statistics
-+ */
-+static void edma_get_ethtool_stats(struct net_device *netdev,
-+ struct ethtool_stats *stats, uint64_t *data)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+ int i;
-+ uint8_t *p = NULL;
-+
-+ edma_read_append_stats(edma_cinfo);
-+
-+ for(i = 0; i < EDMA_STATS_LEN; i++) {
-+ p = (uint8_t *)&(edma_cinfo->edma_ethstats) +
-+ edma_gstrings_stats[i].stat_offset;
-+ data[i] = *(uint32_t *)p;
-+ }
-+}
-+
-+/* edma_get_drvinfo()
-+ * get edma driver info
-+ */
-+static void edma_get_drvinfo(struct net_device *dev,
-+ struct ethtool_drvinfo *info)
-+{
-+ strlcpy(info->driver, "ess_edma", DRVINFO_LEN);
-+ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
-+}
-+
-+/* edma_nway_reset()
-+ * Reset the phy, if available.
-+ */
-+static int edma_nway_reset(struct net_device *netdev)
-+{
-+ return -EINVAL;
-+}
-+
-+/* edma_get_wol()
-+ * get wake on lan info
-+ */
-+static void edma_get_wol(struct net_device *netdev,
-+ struct ethtool_wolinfo *wol)
-+{
-+ wol->supported = 0;
-+ wol->wolopts = 0;
-+}
-+
-+/* edma_get_msglevel()
-+ * get message level.
-+ */
-+static uint32_t edma_get_msglevel(struct net_device *netdev)
-+{
-+ return 0;
-+}
-+
-+/* edma_get_settings()
-+ * Get edma settings
-+ */
-+static int edma_get_settings(struct net_device *netdev,
-+ struct ethtool_cmd *ecmd)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+
-+ if (adapter->poll_required) {
-+ struct phy_device *phydev = NULL;
-+ uint16_t phyreg;
-+
-+ if ((adapter->forced_speed != SPEED_UNKNOWN)
-+ && !(adapter->poll_required))
-+ return -EPERM;
-+
-+ phydev = adapter->phydev;
-+
-+ ecmd->advertising = phydev->advertising;
-+ ecmd->autoneg = phydev->autoneg;
-+
-+ if (adapter->link_state == __EDMA_LINKDOWN) {
-+ ecmd->speed = SPEED_UNKNOWN;
-+ ecmd->duplex = DUPLEX_UNKNOWN;
-+ } else {
-+ ecmd->speed = phydev->speed;
-+ ecmd->duplex = phydev->duplex;
-+ }
-+
-+ ecmd->phy_address = adapter->phy_mdio_addr;
-+
-+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA);
-+ if (phyreg & LPA_10HALF)
-+ ecmd->lp_advertising |= ADVERTISED_10baseT_Half;
-+
-+ if (phyreg & LPA_10FULL)
-+ ecmd->lp_advertising |= ADVERTISED_10baseT_Full;
-+
-+ if (phyreg & LPA_100HALF)
-+ ecmd->lp_advertising |= ADVERTISED_100baseT_Half;
-+
-+ if (phyreg & LPA_100FULL)
-+ ecmd->lp_advertising |= ADVERTISED_100baseT_Full;
-+
-+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000);
-+ if (phyreg & LPA_1000HALF)
-+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half;
-+
-+ if (phyreg & LPA_1000FULL)
-+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full;
-+ } else {
-+ /* If the speed/duplex for this GMAC is forced and we
-+ * are not polling for link state changes, return the
-+ * values as specified by platform. This will be true
-+ * for GMACs connected to switch, and interfaces that
-+ * do not use a PHY.
-+ */
-+ if (!(adapter->poll_required)) {
-+ if (adapter->forced_speed != SPEED_UNKNOWN) {
-+ /* set speed and duplex */
-+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
-+ ecmd->duplex = DUPLEX_FULL;
-+
-+ /* Populate capabilities advertised by self */
-+ ecmd->advertising = 0;
-+ ecmd->autoneg = 0;
-+ ecmd->port = PORT_TP;
-+ ecmd->transceiver = XCVR_EXTERNAL;
-+ } else {
-+ /* non link polled and non
-+ * forced speed/duplex interface
-+ */
-+ return -EIO;
-+ }
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+/* edma_set_settings()
-+ * Set EDMA settings
-+ */
-+static int edma_set_settings(struct net_device *netdev,
-+ struct ethtool_cmd *ecmd)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+ struct phy_device *phydev = NULL;
-+
-+ if ((adapter->forced_speed != SPEED_UNKNOWN) &&
-+ !adapter->poll_required)
-+ return -EPERM;
-+
-+ phydev = adapter->phydev;
-+ phydev->advertising = ecmd->advertising;
-+ phydev->autoneg = ecmd->autoneg;
-+ phydev->speed = ethtool_cmd_speed(ecmd);
-+ phydev->duplex = ecmd->duplex;
-+
-+ genphy_config_aneg(phydev);
-+
-+ return 0;
-+}
-+
-+/* edma_get_coalesce
-+ * get interrupt mitigation
-+ */
-+static int edma_get_coalesce(struct net_device *netdev,
-+ struct ethtool_coalesce *ec)
-+{
-+ u32 reg_val;
-+
-+ edma_get_tx_rx_coalesce(&reg_val);
-+
-+ /* We read the Interrupt Moderation Timer(IMT) register value,
-+ * use lower 16 bit for rx and higher 16 bit for Tx. We do a
-+ * left shift by 1, because IMT resolution timer is 2usecs.
-+ * Hence the value given by the register is multiplied by 2 to
-+ * get the actual time in usecs.
-+ */
-+ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1);
-+ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1);
-+
-+ return 0;
-+}
-+
-+/* edma_set_coalesce
-+ * set interrupt mitigation
-+ */
-+static int edma_set_coalesce(struct net_device *netdev,
-+ struct ethtool_coalesce *ec)
-+{
-+ if (ec->tx_coalesce_usecs)
-+ edma_change_tx_coalesce(ec->tx_coalesce_usecs);
-+ if (ec->rx_coalesce_usecs)
-+ edma_change_rx_coalesce(ec->rx_coalesce_usecs);
-+
-+ return 0;
-+}
-+
-+/* edma_set_priv_flags()
-+ * Set EDMA private flags
-+ */
-+static int edma_set_priv_flags(struct net_device *netdev, u32 flags)
-+{
-+ return 0;
-+}
-+
-+/* edma_get_priv_flags()
-+ * get edma driver flags
-+ */
-+static u32 edma_get_priv_flags(struct net_device *netdev)
-+{
-+ return 0;
-+}
-+
-+/* edma_get_ringparam()
-+ * get ring size
-+ */
-+static void edma_get_ringparam(struct net_device *netdev,
-+ struct ethtool_ringparam *ring)
-+{
-+ struct edma_adapter *adapter = netdev_priv(netdev);
-+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-+
-+ ring->tx_max_pending = edma_cinfo->tx_ring_count;
-+ ring->rx_max_pending = edma_cinfo->rx_ring_count;
-+}
-+
-+/* Ethtool operations
-+ */
-+static const struct ethtool_ops edma_ethtool_ops = {
-+ .get_drvinfo = &edma_get_drvinfo,
-+ .get_link = &ethtool_op_get_link,
-+ .get_msglevel = &edma_get_msglevel,
-+ .nway_reset = &edma_nway_reset,
-+ .get_wol = &edma_get_wol,
-+ .get_settings = &edma_get_settings,
-+ .set_settings = &edma_set_settings,
-+ .get_strings = &edma_get_strings,
-+ .get_sset_count = &edma_get_strset_count,
-+ .get_ethtool_stats = &edma_get_ethtool_stats,
-+ .get_coalesce = &edma_get_coalesce,
-+ .set_coalesce = &edma_set_coalesce,
-+ .get_priv_flags = edma_get_priv_flags,
-+ .set_priv_flags = edma_set_priv_flags,
-+ .get_ringparam = edma_get_ringparam,
-+};
-+
-+/* edma_set_ethtool_ops
-+ * Set ethtool operations
-+ */
-+void edma_set_ethtool_ops(struct net_device *netdev)
-+{
-+ netdev->ethtool_ops = &edma_ethtool_ops;
-+}
---- /dev/null
-+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
-@@ -0,0 +1,332 @@
-+/*
-+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for
-+ * any purpose with or without fee is hereby granted, provided that the
-+ * above copyright notice and this permission notice appear in all copies.
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
-+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _ESS_EDMA_H_
-+#define _ESS_EDMA_H_
-+
-+#include <linux/types.h>
-+
-+struct edma_adapter;
-+struct edma_hw;
-+
-+/* register definition */
-+#define EDMA_REG_MAS_CTRL 0x0
-+#define EDMA_REG_TIMEOUT_CTRL 0x004
-+#define EDMA_REG_DBG0 0x008
-+#define EDMA_REG_DBG1 0x00C
-+#define EDMA_REG_SW_CTRL0 0x100
-+#define EDMA_REG_SW_CTRL1 0x104
-+
-+/* Interrupt Status Register */
-+#define EDMA_REG_RX_ISR 0x200
-+#define EDMA_REG_TX_ISR 0x208
-+#define EDMA_REG_MISC_ISR 0x210
-+#define EDMA_REG_WOL_ISR 0x218
-+
-+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
-+
-+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
-+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
-+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
-+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
-+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
-+
-+#define EDMA_WOL_ISR 0x00000001
-+
-+/* Interrupt Mask Register */
-+#define EDMA_REG_MISC_IMR 0x214
-+#define EDMA_REG_WOL_IMR 0x218
-+
-+#define EDMA_RX_IMR_NORMAL_MASK 0x1
-+#define EDMA_TX_IMR_NORMAL_MASK 0x1
-+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
-+#define EDMA_WOL_IMR_NORMAL_MASK 0x1
-+
-+/* Edma receive consumer index */
-+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
-+/* Edma transmit consumer index */
-+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
-+
-+/* IRQ Moderator Initial Timer Register */
-+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
-+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
-+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
-+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
-+
-+/* Interrupt Control Register */
-+#define EDMA_REG_INTR_CTRL 0x284
-+#define EDMA_INTR_CLR_TYP_SHIFT 0
-+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
-+#define EDMA_INTR_CLEAR_TYPE_W1 0
-+#define EDMA_INTR_CLEAR_TYPE_R 1
-+
-+/* RX Interrupt Mask Register */
-+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
-+
-+/* TX Interrupt mask register */
-+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
-+
-+/* Load Ptr Register
-+ * Software sets this bit after the initialization of the head and tail
-+ */
-+#define EDMA_REG_TX_SRAM_PART 0x400
-+#define EDMA_LOAD_PTR_SHIFT 16
-+
-+/* TXQ Control Register */
-+#define EDMA_REG_TXQ_CTRL 0x404
-+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
-+#define EDMA_TXQ_CTRL_TXQ_EN 0x20
-+#define EDMA_TXQ_CTRL_ENH_MODE 0x40
-+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
-+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
-+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
-+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
-+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
-+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
-+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
-+
-+#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
-+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
-+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
-+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
-+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
-+
-+/* WRR Control Register */
-+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
-+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
-+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
-+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
-+
-+/* Weight round robin(WRR), it takes queue as input, and computes
-+ * starting bits where we need to write the weight for a particular
-+ * queue
-+ */
-+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
-+
-+/* Tx Descriptor Control Register */
-+#define EDMA_REG_TPD_RING_SIZE 0x41C
-+#define EDMA_TPD_RING_SIZE_SHIFT 0
-+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
-+
-+/* Transmit descriptor base address */
-+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
-+
-+/* TPD Index Register */
-+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
-+
-+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
-+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
-+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
-+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
-+#define EDMA_TPD_PROD_IDX_SHIFT 0
-+#define EDMA_TPD_CONS_IDX_SHIFT 16
-+
-+/* TX Virtual Queue Mapping Control Register */
-+#define EDMA_REG_VQ_CTRL0 0x4A0
-+#define EDMA_REG_VQ_CTRL1 0x4A4
-+
-+/* Virtual QID shift, it takes queue as input, and computes
-+ * Virtual QID position in virtual qid control register
-+ */
-+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
-+
-+/* Virtual Queue Default Value */
-+#define EDMA_VQ_REG_VALUE 0x240240
-+
-+/* Tx side Port Interface Control Register */
-+#define EDMA_REG_PORT_CTRL 0x4A8
-+#define EDMA_PAD_EN_SHIFT 15
-+
-+/* Tx side VLAN Configuration Register */
-+#define EDMA_REG_VLAN_CFG 0x4AC
-+
-+#define EDMA_TX_CVLAN 16
-+#define EDMA_TX_INS_CVLAN 17
-+#define EDMA_TX_CVLAN_TAG_SHIFT 0
-+
-+#define EDMA_TX_SVLAN 14
-+#define EDMA_TX_INS_SVLAN 15
-+#define EDMA_TX_SVLAN_TAG_SHIFT 16
-+
-+/* Tx Queue Packet Statistic Register */
-+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
-+
-+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
-+
-+/* Tx Queue Byte Statistic Register */
-+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
-+
-+/* Load Balance Based Ring Offset Register */
-+#define EDMA_REG_LB_RING 0x800
-+#define EDMA_LB_RING_ENTRY_MASK 0xff
-+#define EDMA_LB_RING_ID_MASK 0x7
-+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
-+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
-+#define EDMA_LB_RING_ID_OFFSET 0
-+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
-+#define EDMA_LB_REG_VALUE 0x6040200
-+
-+/* Load Balance Priority Mapping Register */
-+#define EDMA_REG_LB_PRI_START 0x804
-+#define EDMA_REG_LB_PRI_END 0x810
-+#define EDMA_LB_PRI_REG_INC 4
-+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
-+#define EDMA_LB_PRI_ENTRY_MASK 0xf
-+
-+/* RSS Priority Mapping Register */
-+#define EDMA_REG_RSS_PRI 0x820
-+#define EDMA_RSS_PRI_ENTRY_MASK 0xf
-+#define EDMA_RSS_RING_ID_MASK 0x7
-+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
-+
-+/* RSS Indirection Register */
-+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
-+#define EDMA_NUM_IDT 16
-+#define EDMA_RSS_IDT_VALUE 0x64206420
-+
-+/* Default RSS Ring Register */
-+#define EDMA_REG_DEF_RSS 0x890
-+#define EDMA_DEF_RSS_MASK 0x7
-+
-+/* RSS Hash Function Type Register */
-+#define EDMA_REG_RSS_TYPE 0x894
-+#define EDMA_RSS_TYPE_NONE 0x01
-+#define EDMA_RSS_TYPE_IPV4TCP 0x02
-+#define EDMA_RSS_TYPE_IPV6_TCP 0x04
-+#define EDMA_RSS_TYPE_IPV4_UDP 0x08
-+#define EDMA_RSS_TYPE_IPV6UDP 0x10
-+#define EDMA_RSS_TYPE_IPV4 0x20
-+#define EDMA_RSS_TYPE_IPV6 0x40
-+#define EDMA_RSS_HASH_MODE_MASK 0x7f
-+
-+#define EDMA_REG_RSS_HASH_VALUE 0x8C0
-+
-+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
-+
-+#define EDMA_HASH_TYPE_START 0
-+#define EDMA_HASH_TYPE_END 5
-+#define EDMA_HASH_TYPE_SHIFT 12
-+
-+#define EDMA_RFS_FLOW_ENTRIES 1024
-+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
-+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
-+
-+/* RFD Base Address Register */
-+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
-+
-+/* RFD Index Register */
-+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
-+
-+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
-+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
-+#define EDMA_RFD_PROD_IDX_MASK 0xFFF
-+#define EDMA_RFD_CONS_IDX_MASK 0xFFF
-+#define EDMA_RFD_PROD_IDX_SHIFT 0
-+#define EDMA_RFD_CONS_IDX_SHIFT 16
-+
-+/* Rx Descriptor Control Register */
-+#define EDMA_REG_RX_DESC0 0xA10
-+#define EDMA_RFD_RING_SIZE_MASK 0xFFF
-+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
-+#define EDMA_RFD_RING_SIZE_SHIFT 0
-+#define EDMA_RX_BUF_SIZE_SHIFT 16
-+
-+#define EDMA_REG_RX_DESC1 0xA14
-+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
-+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
-+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
-+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
-+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
-+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
-+
-+/* RXQ Control Register */
-+#define EDMA_REG_RXQ_CTRL 0xA18
-+#define EDMA_FIFO_THRESH_TYPE_SHIF 0
-+#define EDMA_FIFO_THRESH_128_BYTE 0x0
-+#define EDMA_FIFO_THRESH_64_BYTE 0x1
-+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
-+#define EDMA_RXQ_CTRL_EN 0x0000FF00
-+
-+/* AXI Burst Size Config */
-+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
-+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
-+
-+/* Rx Statistics Register */
-+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
-+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
-+
-+/* WoL Pattern Length Register */
-+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
-+#define EDMA_WOL_PT_LEN_MASK 0xFF
-+#define EDMA_WOL_PT0_LEN_SHIFT 0
-+#define EDMA_WOL_PT1_LEN_SHIFT 8
-+#define EDMA_WOL_PT2_LEN_SHIFT 16
-+#define EDMA_WOL_PT3_LEN_SHIFT 24
-+
-+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
-+#define EDMA_WOL_PT4_LEN_SHIFT 0
-+#define EDMA_WOL_PT5_LEN_SHIFT 8
-+#define EDMA_WOL_PT6_LEN_SHIFT 16
-+
-+/* WoL Control Register */
-+#define EDMA_REG_WOL_CTRL 0xC08
-+#define EDMA_WOL_WK_EN 0x00000001
-+#define EDMA_WOL_MG_EN 0x00000002
-+#define EDMA_WOL_PT0_EN 0x00000004
-+#define EDMA_WOL_PT1_EN 0x00000008
-+#define EDMA_WOL_PT2_EN 0x00000010
-+#define EDMA_WOL_PT3_EN 0x00000020
-+#define EDMA_WOL_PT4_EN 0x00000040
-+#define EDMA_WOL_PT5_EN 0x00000080
-+#define EDMA_WOL_PT6_EN 0x00000100
-+
-+/* MAC Control Register */
-+#define EDMA_REG_MAC_CTRL0 0xC20
-+#define EDMA_REG_MAC_CTRL1 0xC24
-+
-+/* WoL Pattern Register */
-+#define EDMA_REG_WOL_PATTERN_START 0x5000
-+#define EDMA_PATTERN_PART_REG_OFFSET 0x40
-+
-+
-+/* TX descriptor fields */
-+#define EDMA_TPD_HDR_SHIFT 0
-+#define EDMA_TPD_PPPOE_EN 0x00000100
-+#define EDMA_TPD_IP_CSUM_EN 0x00000200
-+#define EDMA_TPD_TCP_CSUM_EN 0x0000400
-+#define EDMA_TPD_UDP_CSUM_EN 0x00000800
-+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
-+#define EDMA_TPD_LSO_EN 0x00001000
-+#define EDMA_TPD_LSO_V2_EN 0x00002000
-+#define EDMA_TPD_IPV4_EN 0x00010000
-+#define EDMA_TPD_MSS_MASK 0x1FFF
-+#define EDMA_TPD_MSS_SHIFT 18
-+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
-+
-+/* RRD descriptor fields */
-+#define EDMA_RRD_NUM_RFD_MASK 0x000F
-+#define EDMA_RRD_SVLAN 0x8000
-+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
-+
-+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
-+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
-+#define EDMA_RRD_CVLAN 0x0001
-+#define EDMA_RRD_DESC_VALID 0x8000
-+
-+#define EDMA_RRD_PRIORITY_SHIFT 4
-+#define EDMA_RRD_PRIORITY_MASK 0x7
-+#define EDMA_RRD_PORT_TYPE_SHIFT 7
-+#define EDMA_RRD_PORT_TYPE_MASK 0x1F
-+#endif /* _ESS_EDMA_H_ */
diff --git a/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch
deleted file mode 100644
index 771ff22753..0000000000
--- a/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet essedma node
-
-This patch adds the device-tree node for the ethernet
-interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -26,6 +26,8 @@
- aliases {
- spi0 = &spi_0;
- i2c0 = &i2c_0;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
- };
-
- cpus {
-@@ -366,6 +368,64 @@
- status = "disabled";
- };
-
-+ edma@c080000 {
-+ compatible = "qcom,ess-edma";
-+ reg = <0xc080000 0x8000>;
-+ qcom,page-mode = <0>;
-+ qcom,rx_head_buf_size = <1540>;
-+ qcom,mdio_supported;
-+ qcom,poll_required = <1>;
-+ qcom,num_gmac = <2>;
-+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
-+ 0 66 IRQ_TYPE_EDGE_RISING
-+ 0 67 IRQ_TYPE_EDGE_RISING
-+ 0 68 IRQ_TYPE_EDGE_RISING
-+ 0 69 IRQ_TYPE_EDGE_RISING
-+ 0 70 IRQ_TYPE_EDGE_RISING
-+ 0 71 IRQ_TYPE_EDGE_RISING
-+ 0 72 IRQ_TYPE_EDGE_RISING
-+ 0 73 IRQ_TYPE_EDGE_RISING
-+ 0 74 IRQ_TYPE_EDGE_RISING
-+ 0 75 IRQ_TYPE_EDGE_RISING
-+ 0 76 IRQ_TYPE_EDGE_RISING
-+ 0 77 IRQ_TYPE_EDGE_RISING
-+ 0 78 IRQ_TYPE_EDGE_RISING
-+ 0 79 IRQ_TYPE_EDGE_RISING
-+ 0 80 IRQ_TYPE_EDGE_RISING
-+ 0 240 IRQ_TYPE_EDGE_RISING
-+ 0 241 IRQ_TYPE_EDGE_RISING
-+ 0 242 IRQ_TYPE_EDGE_RISING
-+ 0 243 IRQ_TYPE_EDGE_RISING
-+ 0 244 IRQ_TYPE_EDGE_RISING
-+ 0 245 IRQ_TYPE_EDGE_RISING
-+ 0 246 IRQ_TYPE_EDGE_RISING
-+ 0 247 IRQ_TYPE_EDGE_RISING
-+ 0 248 IRQ_TYPE_EDGE_RISING
-+ 0 249 IRQ_TYPE_EDGE_RISING
-+ 0 250 IRQ_TYPE_EDGE_RISING
-+ 0 251 IRQ_TYPE_EDGE_RISING
-+ 0 252 IRQ_TYPE_EDGE_RISING
-+ 0 253 IRQ_TYPE_EDGE_RISING
-+ 0 254 IRQ_TYPE_EDGE_RISING
-+ 0 255 IRQ_TYPE_EDGE_RISING>;
-+
-+ status = "disabled";
-+
-+ gmac0: gmac0 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ vlan_tag = <1 0x1f>;
-+ };
-+
-+ gmac1: gmac1 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,forced_speed = <1000>;
-+ qcom,forced_duplex = <1>;
-+ vlan_tag = <2 0x20>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qca,uni-ssphy";
- reg = <0x9a000 0x800>;
diff --git a/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
deleted file mode 100644
index 6f5b6616d1..0000000000
--- a/target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
+++ /dev/null
@@ -1,429 +0,0 @@
-From e73682ec4455c34f3f3edc7f40d90ed297521012 Mon Sep 17 00:00:00 2001
-From: Senthilkumar N L <snlakshm@codeaurora.org>
-Date: Tue, 6 Jan 2015 12:52:23 +0530
-Subject: [PATCH] qcom: ipq4019: Add IPQ4019 USB HS/SS PHY drivers
-
-These drivers handles control and configuration of the HS
-and SS USB PHY transceivers.
-
-Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-
----
-Changed:
- - replaced spaces with tabs
- - remove emulation and host variables
----
- drivers/usb/phy/Kconfig | 11 ++
- drivers/usb/phy/Makefile | 2 +
- drivers/usb/phy/phy-qca-baldur.c | 233 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/phy/phy-qca-uniphy.c | 141 +++++++++++++++++++++++
- 4 files changed, 387 insertions(+)
- create mode 100644 drivers/usb/phy/phy-qca-baldur.c
- create mode 100644 drivers/usb/phy/phy-qca-uniphy.c
-
---- a/drivers/usb/phy/Kconfig
-+++ b/drivers/usb/phy/Kconfig
-@@ -195,6 +195,17 @@ config USB_MXS_PHY
-
- MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
-
-+config USB_IPQ4019_PHY
-+ tristate "IPQ4019 PHY wrappers support"
-+ depends on (USB || USB_GADGET) && ARCH_QCOM
-+ select USB_PHY
-+ help
-+ Enable this to support the USB PHY transceivers on QCA961x chips.
-+ It handles PHY initialization, clock management required after
-+ resetting the hardware and power management.
-+ This driver is required even for peripheral only or host only
-+ mode configurations.
-+
- config USB_ULPI
- bool "Generic ULPI Transceiver Driver"
- depends on ARM || ARM64
---- a/drivers/usb/phy/Makefile
-+++ b/drivers/usb/phy/Makefile
-@@ -21,6 +21,8 @@ obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio
- obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o
- obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
- obj-$(CONFIG_USB_QCOM_8X16_PHY) += phy-qcom-8x16-usb.o
-+obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-baldur.o
-+obj-$(CONFIG_USB_IPQ4019_PHY) += phy-qca-uniphy.o
- obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
- obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
- obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
---- /dev/null
-+++ b/drivers/usb/phy/phy-qca-baldur.c
-@@ -0,0 +1,233 @@
-+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/usb/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_device.h>
-+
-+/**
-+ * USB Hardware registers
-+ */
-+#define PHY_CTRL0_ADDR 0x000
-+#define PHY_CTRL1_ADDR 0x004
-+#define PHY_CTRL2_ADDR 0x008
-+#define PHY_CTRL3_ADDR 0x00C
-+#define PHY_CTRL4_ADDR 0x010
-+#define PHY_MISC_ADDR 0x024
-+#define PHY_IPG_ADDR 0x030
-+
-+#define PHY_CTRL0_VAL 0xA4600015
-+#define PHY_CTRL1_VAL 0x09500000
-+#define PHY_CTRL2_VAL 0x00058180
-+#define PHY_CTRL3_VAL 0x6DB6DCD6
-+#define PHY_CTRL4_VAL 0x836DB6DB
-+#define PHY_MISC_VAL 0x3803FB0C
-+#define PHY_IPG_VAL 0x47323232
-+
-+#define USB30_HS_PHY_HOST_MODE (0x01 << 21)
-+#define USB20_HS_PHY_HOST_MODE (0x01 << 5)
-+
-+/* used to differentiate between USB3 HS and USB2 HS PHY */
-+struct qca_baldur_hs_data {
-+ unsigned int usb3_hs_phy;
-+ unsigned int phy_config_offset;
-+};
-+
-+struct qca_baldur_hs_phy {
-+ struct device *dev;
-+ struct usb_phy phy;
-+
-+ void __iomem *base;
-+ void __iomem *qscratch_base;
-+
-+ struct reset_control *por_rst;
-+ struct reset_control *srif_rst;
-+
-+ const struct qca_baldur_hs_data *data;
-+};
-+
-+#define phy_to_dw_phy(x) container_of((x), struct qca_baldur_hs_phy, phy)
-+
-+static int qca_baldur_phy_read(struct usb_phy *x, u32 reg)
-+{
-+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
-+
-+ return readl(phy->base + reg);
-+}
-+
-+static int qca_baldur_phy_write(struct usb_phy *x, u32 val, u32 reg)
-+{
-+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
-+
-+ writel(val, phy->base + reg);
-+ return 0;
-+}
-+
-+static int qca_baldur_hs_phy_init(struct usb_phy *x)
-+{
-+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
-+
-+ /* assert HS PHY POR reset */
-+ reset_control_assert(phy->por_rst);
-+ msleep(10);
-+
-+ /* assert HS PHY SRIF reset */
-+ reset_control_assert(phy->srif_rst);
-+ msleep(10);
-+
-+ /* deassert HS PHY SRIF reset and program HS PHY registers */
-+ reset_control_deassert(phy->srif_rst);
-+ msleep(10);
-+
-+ /* perform PHY register writes */
-+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
-+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
-+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
-+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
-+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
-+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
-+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
-+
-+ msleep(10);
-+
-+ /* de-assert USB3 HS PHY POR reset */
-+ reset_control_deassert(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static int qca_baldur_hs_get_resources(struct qca_baldur_hs_phy *phy)
-+{
-+ struct platform_device *pdev = to_platform_device(phy->dev);
-+ struct resource *res;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy->base = devm_ioremap_resource(phy->dev, res);
-+ if (IS_ERR(phy->base))
-+ return PTR_ERR(phy->base);
-+
-+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
-+ if (IS_ERR(phy->por_rst))
-+ return PTR_ERR(phy->por_rst);
-+
-+ phy->srif_rst = devm_reset_control_get(phy->dev, "srif_rst");
-+ if (IS_ERR(phy->srif_rst))
-+ return PTR_ERR(phy->srif_rst);
-+
-+ return 0;
-+}
-+
-+static void qca_baldur_hs_put_resources(struct qca_baldur_hs_phy *phy)
-+{
-+ reset_control_assert(phy->srif_rst);
-+ reset_control_assert(phy->por_rst);
-+}
-+
-+static int qca_baldur_hs_remove(struct platform_device *pdev)
-+{
-+ struct qca_baldur_hs_phy *phy = platform_get_drvdata(pdev);
-+
-+ usb_remove_phy(&phy->phy);
-+ return 0;
-+}
-+
-+static void qca_baldur_hs_phy_shutdown(struct usb_phy *x)
-+{
-+ struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
-+
-+ qca_baldur_hs_put_resources(phy);
-+}
-+
-+static struct usb_phy_io_ops qca_baldur_io_ops = {
-+ .read = qca_baldur_phy_read,
-+ .write = qca_baldur_phy_write,
-+};
-+
-+static const struct qca_baldur_hs_data usb3_hs_data = {
-+ .usb3_hs_phy = 1,
-+ .phy_config_offset = USB30_HS_PHY_HOST_MODE,
-+};
-+
-+static const struct qca_baldur_hs_data usb2_hs_data = {
-+ .usb3_hs_phy = 0,
-+ .phy_config_offset = USB20_HS_PHY_HOST_MODE,
-+};
-+
-+static const struct of_device_id qca_baldur_hs_id_table[] = {
-+ { .compatible = "qca,baldur-usb3-hsphy", .data = &usb3_hs_data },
-+ { .compatible = "qca,baldur-usb2-hsphy", .data = &usb2_hs_data },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qca_baldur_hs_id_table);
-+
-+static int qca_baldur_hs_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *match;
-+ struct qca_baldur_hs_phy *phy;
-+ int err;
-+
-+ match = of_match_device(qca_baldur_hs_id_table, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
-+
-+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, phy);
-+ phy->dev = &pdev->dev;
-+
-+ phy->data = match->data;
-+
-+ err = qca_baldur_hs_get_resources(phy);
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "failed to request resources: %d\n", err);
-+ return err;
-+ }
-+
-+ phy->phy.dev = phy->dev;
-+ phy->phy.label = "qca-baldur-hsphy";
-+ phy->phy.init = qca_baldur_hs_phy_init;
-+ phy->phy.shutdown = qca_baldur_hs_phy_shutdown;
-+ phy->phy.type = USB_PHY_TYPE_USB2;
-+ phy->phy.io_ops = &qca_baldur_io_ops;
-+
-+ err = usb_add_phy_dev(&phy->phy);
-+ return err;
-+}
-+
-+static struct platform_driver qca_baldur_hs_driver = {
-+ .probe = qca_baldur_hs_probe,
-+ .remove = qca_baldur_hs_remove,
-+ .driver = {
-+ .name = "qca-baldur-hsphy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qca_baldur_hs_id_table,
-+ },
-+};
-+
-+module_platform_driver(qca_baldur_hs_driver);
-+
-+MODULE_ALIAS("platform:qca-baldur-hsphy");
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("USB3 QCA BALDUR HSPHY driver");
---- /dev/null
-+++ b/drivers/usb/phy/phy-qca-uniphy.c
-@@ -0,0 +1,135 @@
-+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ *
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/usb/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_device.h>
-+
-+struct qca_uni_ss_phy {
-+ struct usb_phy phy;
-+ struct device *dev;
-+
-+ void __iomem *base;
-+
-+ struct reset_control *por_rst;
-+};
-+
-+#define phy_to_dw_phy(x) container_of((x), struct qca_uni_ss_phy, phy)
-+
-+static void qca_uni_ss_phy_shutdown(struct usb_phy *x)
-+{
-+ struct qca_uni_ss_phy *phy = phy_to_dw_phy(x);
-+
-+ /* assert SS PHY POR reset */
-+ reset_control_assert(phy->por_rst);
-+}
-+
-+static int qca_uni_ss_phy_init(struct usb_phy *x)
-+{
-+ struct qca_uni_ss_phy *phy = phy_to_dw_phy(x);
-+
-+ /* assert SS PHY POR reset */
-+ reset_control_assert(phy->por_rst);
-+
-+ msleep(20);
-+
-+ /* deassert SS PHY POR reset */
-+ reset_control_deassert(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static int qca_uni_ss_get_resources(struct platform_device *pdev,
-+ struct qca_uni_ss_phy *phy)
-+{
-+ struct resource *res;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy->base = devm_ioremap_resource(phy->dev, res);
-+ if (IS_ERR(phy->base))
-+ return PTR_ERR(phy->base);
-+
-+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
-+ if (IS_ERR(phy->por_rst))
-+ return PTR_ERR(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static int qca_uni_ss_remove(struct platform_device *pdev)
-+{
-+ struct qca_uni_ss_phy *phy = platform_get_drvdata(pdev);
-+
-+ usb_remove_phy(&phy->phy);
-+ return 0;
-+}
-+
-+static const struct of_device_id qca_uni_ss_id_table[] = {
-+ { .compatible = "qca,uni-ssphy" },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qca_uni_ss_id_table);
-+
-+static int qca_uni_ss_probe(struct platform_device *pdev)
-+{
-+ struct qca_uni_ss_phy *phy;
-+ int ret;
-+
-+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, phy);
-+ phy->dev = &pdev->dev;
-+
-+ ret = qca_uni_ss_get_resources(pdev, phy);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to request resources: %d\n", ret);
-+ return ret;
-+ }
-+
-+ phy->phy.dev = phy->dev;
-+ phy->phy.label = "qca-uni-ssphy";
-+ phy->phy.init = qca_uni_ss_phy_init;
-+ phy->phy.shutdown = qca_uni_ss_phy_shutdown;
-+ phy->phy.type = USB_PHY_TYPE_USB3;
-+
-+ ret = usb_add_phy_dev(&phy->phy);
-+ return ret;
-+}
-+
-+static struct platform_driver qca_uni_ss_driver = {
-+ .probe = qca_uni_ss_probe,
-+ .remove = qca_uni_ss_remove,
-+ .driver = {
-+ .name = "qca-uni-ssphy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qca_uni_ss_id_table,
-+ },
-+};
-+
-+module_platform_driver(qca_uni_ss_driver);
-+
-+MODULE_ALIAS("platform:qca-uni-ssphy");
-+MODULE_LICENSE("Dual BSD/GPL");
-+MODULE_DESCRIPTION("USB3 QCA UNI SSPHY driver");
diff --git a/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch b/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch
deleted file mode 100644
index 5e183dbad7..0000000000
--- a/target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 08c18ab774368feb610d1eb952957bb1bb35129f Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 19 Nov 2016 00:52:35 +0100
-Subject: [PATCH 37/38] usb: dwc3: register qca,ipq4019-dwc3 in dwc3-of-simple
-
-For host mode, the dwc3 found in the IPQ4019 can be driven
-by the dwc3-of-simple module. It will get more tricky for
-OTG since they'll need to enable VBUS and reconfigure the
-registers.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/usb/dwc3/dwc3-of-simple.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/usb/dwc3/dwc3-of-simple.c
-+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -199,6 +199,7 @@ static const struct dev_pm_ops dwc3_of_s
-
- static const struct of_device_id of_dwc3_simple_match[] = {
- { .compatible = "qcom,dwc3" },
-+ { .compatible = "qca,ipq4019-dwc3" },
- { .compatible = "rockchip,rk3399-dwc3" },
- { .compatible = "xlnx,zynqmp-dwc3" },
- { .compatible = "cavium,octeon-7130-usb-uctl" },
diff --git a/target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch b/target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch
deleted file mode 100644
index d0a6a26a56..0000000000
--- a/target/linux/ipq806x/patches-4.9/852-ipq4019-pinctrl-Updated-various-Pin-definitions.patch
+++ /dev/null
@@ -1,1328 +0,0 @@
-From fc6cf61517b8b4ab4678659936fc7572f699d6e7 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Tue, 28 Mar 2017 14:00:00 +0530
-Subject: [PATCH] ipq4019: pinctrl: Updated various Pin definitions
-
-Populate default values for various GPIO functions
-
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1189 +++++++++++++++++++++++++++++---
- 1 file changed, 1111 insertions(+), 78 deletions(-)
-
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -276,16 +276,531 @@ DECLARE_QCA_GPIO_PINS(99);
-
-
- enum ipq4019_functions {
-+ qca_mux_rmii0_refclk,
-+ qca_mux_wifi0_rfsilient0,
-+ qca_mux_wifi1_rfsilient0,
-+ qca_mux_smart2,
-+ qca_mux_led4,
-+ qca_mux_wifi0_cal,
-+ qca_mux_wifi1_cal,
-+ qca_mux_wifi_wci0,
-+ qca_mux_rmii0_dv,
-+ qca_mux_wifi_wci1,
-+ qca_mux_rmii1_refclk,
-+ qca_mux_blsp_spi1,
-+ qca_mux_led5,
-+ qca_mux_rmii10,
-+ qca_mux_led6,
-+ qca_mux_rmii11,
-+ qca_mux_led7,
-+ qca_mux_rmii1_dv,
-+ qca_mux_led8,
-+ qca_mux_rmii1_tx,
-+ qca_mux_aud_pin,
-+ qca_mux_led9,
-+ qca_mux_rmii1_rx,
-+ qca_mux_led10,
-+ qca_mux_wifi0_rfsilient1,
-+ qca_mux_wifi1_rfsilient1,
-+ qca_mux_led11,
-+ qca_mux_boot7,
-+ qca_mux_qpic_pad,
-+ qca_mux_pcie_clk,
-+ qca_mux_tm_clk0,
-+ qca_mux_wifi00,
-+ qca_mux_wifi10,
-+ qca_mux_mdio1,
-+ qca_mux_prng_rosc,
-+ qca_mux_dbg_out,
-+ qca_mux_tm0,
-+ qca_mux_wifi01,
-+ qca_mux_wifi11,
-+ qca_mux_atest_char3,
-+ qca_mux_pmu0,
-+ qca_mux_boot8,
-+ qca_mux_tm1,
-+ qca_mux_atest_char2,
-+ qca_mux_pmu1,
-+ qca_mux_boot9,
-+ qca_mux_tm2,
-+ qca_mux_atest_char1,
-+ qca_mux_tm_ack,
-+ qca_mux_wifi03,
-+ qca_mux_wifi13,
-+ qca_mux_qpic_pad4,
-+ qca_mux_atest_char0,
-+ qca_mux_tm3,
-+ qca_mux_wifi02,
-+ qca_mux_wifi12,
-+ qca_mux_qpic_pad5,
-+ qca_mux_smart3,
-+ qca_mux_wcss0_dbg14,
-+ qca_mux_tm4,
-+ qca_mux_wifi04,
-+ qca_mux_wifi14,
-+ qca_mux_qpic_pad6,
-+ qca_mux_wcss0_dbg15,
-+ qca_mux_qdss_tracectl_a,
-+ qca_mux_boot18,
-+ qca_mux_tm5,
-+ qca_mux_qpic_pad7,
-+ qca_mux_atest_char,
-+ qca_mux_wcss0_dbg4,
-+ qca_mux_qdss_traceclk_a,
-+ qca_mux_boot19,
-+ qca_mux_tm6,
-+ qca_mux_wcss0_dbg5,
-+ qca_mux_qdss_cti_trig_out_a0,
-+ qca_mux_boot14,
-+ qca_mux_tm7,
-+ qca_mux_chip_rst,
-+ qca_mux_wcss0_dbg6,
-+ qca_mux_qdss_cti_trig_out_b0,
-+ qca_mux_boot11,
-+ qca_mux_tm8,
-+ qca_mux_wcss0_dbg7,
-+ qca_mux_wcss1_dbg7,
-+ qca_mux_boot20,
-+ qca_mux_tm9,
-+ qca_mux_qpic_pad1,
-+ qca_mux_wcss0_dbg8,
-+ qca_mux_wcss1_dbg8,
-+ qca_mux_qpic_pad2,
-+ qca_mux_wcss0_dbg9,
-+ qca_mux_wcss1_dbg9,
-+ qca_mux_qpic_pad3,
-+ qca_mux_wcss0_dbg10,
-+ qca_mux_wcss1_dbg10,
-+ qca_mux_qpic_pad0,
-+ qca_mux_wcss0_dbg11,
-+ qca_mux_wcss1_dbg11,
-+ qca_mux_qpic_pad8,
-+ qca_mux_wcss0_dbg12,
-+ qca_mux_wcss1_dbg12,
-+ qca_mux_wifi034,
-+ qca_mux_wifi134,
-+ qca_mux_jtag_tdi,
- qca_mux_gpio,
-+ qca_mux_i2s_rx_bclk,
-+ qca_mux_jtag_tck,
-+ qca_mux_i2s_rx_fsync,
-+ qca_mux_jtag_tms,
-+ qca_mux_i2s_rxd,
-+ qca_mux_smart0,
-+ qca_mux_jtag_tdo,
-+ qca_mux_jtag_rst,
-+ qca_mux_jtag_trst,
-+ qca_mux_mdio0,
-+ qca_mux_wcss0_dbg18,
-+ qca_mux_wcss1_dbg18,
-+ qca_mux_qdss_tracedata_a,
-+ qca_mux_mdc,
-+ qca_mux_wcss0_dbg19,
-+ qca_mux_wcss1_dbg19,
- qca_mux_blsp_uart1,
-+ qca_mux_wifi0_uart,
-+ qca_mux_wifi1_uart,
-+ qca_mux_smart1,
-+ qca_mux_wcss0_dbg20,
-+ qca_mux_wcss1_dbg20,
-+ qca_mux_wifi0_uart0,
-+ qca_mux_wifi1_uart0,
-+ qca_mux_wcss0_dbg21,
-+ qca_mux_wcss1_dbg21,
- qca_mux_blsp_i2c0,
-+ qca_mux_wcss0_dbg22,
-+ qca_mux_wcss1_dbg22,
-+ qca_mux_wcss0_dbg23,
-+ qca_mux_wcss1_dbg23,
-+ qca_mux_blsp_spi0,
- qca_mux_blsp_i2c1,
-+ qca_mux_wcss0_dbg24,
-+ qca_mux_wcss1_dbg24,
-+ qca_mux_wcss0_dbg25,
-+ qca_mux_wcss1_dbg25,
-+ qca_mux_wcss0_dbg26,
-+ qca_mux_wcss1_dbg26,
-+ qca_mux_wcss0_dbg,
-+ qca_mux_wcss1_dbg,
- qca_mux_blsp_uart0,
-- qca_mux_blsp_spi1,
-- qca_mux_blsp_spi0,
-+ qca_mux_led0,
-+ qca_mux_wcss0_dbg28,
-+ qca_mux_wcss1_dbg28,
-+ qca_mux_led1,
-+ qca_mux_wcss0_dbg29,
-+ qca_mux_wcss1_dbg29,
-+ qca_mux_wifi0_uart1,
-+ qca_mux_wifi1_uart1,
-+ qca_mux_wcss0_dbg30,
-+ qca_mux_wcss1_dbg30,
-+ qca_mux_wcss0_dbg31,
-+ qca_mux_wcss1_dbg31,
-+ qca_mux_i2s_rx_mclk,
-+ qca_mux_wcss0_dbg16,
-+ qca_mux_wcss1_dbg16,
-+ qca_mux_wcss0_dbg17,
-+ qca_mux_wcss1_dbg17,
-+ qca_mux_rgmii0,
-+ qca_mux_sdio0,
-+ qca_mux_rgmii1,
-+ qca_mux_sdio1,
-+ qca_mux_rgmii2,
-+ qca_mux_i2s_tx_mclk,
-+ qca_mux_sdio2,
-+ qca_mux_rgmii3,
-+ qca_mux_i2s_tx_bclk,
-+ qca_mux_sdio3,
-+ qca_mux_rgmii_rx,
-+ qca_mux_i2s_tx_fsync,
-+ qca_mux_sdio_clk,
-+ qca_mux_rgmii_txc,
-+ qca_mux_i2s_td1,
-+ qca_mux_sdio_cmd,
-+ qca_mux_i2s_td2,
-+ qca_mux_sdio4,
-+ qca_mux_i2s_td3,
-+ qca_mux_sdio5,
-+ qca_mux_audio_pwm0,
-+ qca_mux_sdio6,
-+ qca_mux_audio_pwm1,
-+ qca_mux_wcss0_dbg27,
-+ qca_mux_wcss1_dbg27,
-+ qca_mux_sdio7,
-+ qca_mux_rgmii_rxc,
-+ qca_mux_audio_pwm2,
-+ qca_mux_rgmii_tx,
-+ qca_mux_audio_pwm3,
-+ qca_mux_boot2,
-+ qca_mux_i2s_spdif_in,
-+ qca_mux_i2s_spdif_out,
-+ qca_mux_rmii00,
-+ qca_mux_led2,
-+ qca_mux_rmii01,
-+ qca_mux_wifi0_wci,
-+ qca_mux_wifi1_wci,
-+ qca_mux_boot4,
-+ qca_mux_rmii0_tx,
-+ qca_mux_boot5,
-+ qca_mux_rmii0_rx,
-+ qca_mux_pcie_clk1,
-+ qca_mux_led3,
-+ qca_mux_sdio_cd,
- qca_mux_NA,
- };
-
-+static const char * const rmii0_refclk_groups[] = {
-+ "gpio40",
-+};
-+static const char * const wifi0_rfsilient0_groups[] = {
-+ "gpio40",
-+};
-+static const char * const wifi1_rfsilient0_groups[] = {
-+ "gpio40",
-+};
-+static const char * const smart2_groups[] = {
-+ "gpio40", "gpio41", "gpio48", "gpio49",
-+};
-+static const char * const led4_groups[] = {
-+ "gpio40",
-+};
-+static const char * const wifi0_cal_groups[] = {
-+ "gpio41", "gpio51",
-+};
-+static const char * const wifi1_cal_groups[] = {
-+ "gpio41", "gpio51",
-+};
-+static const char * const wifi_wci0_groups[] = {
-+ "gpio42",
-+};
-+static const char * const rmii0_dv_groups[] = {
-+ "gpio43",
-+};
-+static const char * const wifi_wci1_groups[] = {
-+ "gpio43",
-+};
-+static const char * const rmii1_refclk_groups[] = {
-+ "gpio44",
-+};
-+static const char * const blsp_spi1_groups[] = {
-+ "gpio44", "gpio45", "gpio46", "gpio47",
-+};
-+static const char * const led5_groups[] = {
-+ "gpio44",
-+};
-+static const char * const rmii10_groups[] = {
-+ "gpio45", "gpio50",
-+};
-+static const char * const led6_groups[] = {
-+ "gpio45",
-+};
-+static const char * const rmii11_groups[] = {
-+ "gpio46", "gpio51",
-+};
-+static const char * const led7_groups[] = {
-+ "gpio46",
-+};
-+static const char * const rmii1_dv_groups[] = {
-+ "gpio47",
-+};
-+static const char * const led8_groups[] = {
-+ "gpio47",
-+};
-+static const char * const rmii1_tx_groups[] = {
-+ "gpio48",
-+};
-+static const char * const aud_pin_groups[] = {
-+ "gpio48", "gpio49", "gpio50", "gpio51",
-+};
-+static const char * const led9_groups[] = {
-+ "gpio48",
-+};
-+static const char * const rmii1_rx_groups[] = {
-+ "gpio49",
-+};
-+static const char * const led10_groups[] = {
-+ "gpio49",
-+};
-+static const char * const wifi0_rfsilient1_groups[] = {
-+ "gpio50",
-+};
-+static const char * const wifi1_rfsilient1_groups[] = {
-+ "gpio50",
-+};
-+static const char * const led11_groups[] = {
-+ "gpio50",
-+};
-+static const char * const boot7_groups[] = {
-+ "gpio51",
-+};
-+static const char * const qpic_pad_groups[] = {
-+ "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", "gpio61", "gpio62",
-+ "gpio63", "gpio69",
-+};
-+static const char * const pcie_clk_groups[] = {
-+ "gpio52",
-+};
-+static const char * const tm_clk0_groups[] = {
-+ "gpio52",
-+};
-+static const char * const wifi00_groups[] = {
-+ "gpio52",
-+};
-+static const char * const wifi10_groups[] = {
-+ "gpio52",
-+};
-+static const char * const mdio1_groups[] = {
-+ "gpio53",
-+};
-+static const char * const prng_rosc_groups[] = {
-+ "gpio53",
-+};
-+static const char * const dbg_out_groups[] = {
-+ "gpio53",
-+};
-+static const char * const tm0_groups[] = {
-+ "gpio53",
-+};
-+static const char * const wifi01_groups[] = {
-+ "gpio53",
-+};
-+static const char * const wifi11_groups[] = {
-+ "gpio53",
-+};
-+static const char * const atest_char3_groups[] = {
-+ "gpio54",
-+};
-+static const char * const pmu0_groups[] = {
-+ "gpio54",
-+};
-+static const char * const boot8_groups[] = {
-+ "gpio54",
-+};
-+static const char * const tm1_groups[] = {
-+ "gpio54",
-+};
-+static const char * const atest_char2_groups[] = {
-+ "gpio55",
-+};
-+static const char * const pmu1_groups[] = {
-+ "gpio55",
-+};
-+static const char * const boot9_groups[] = {
-+ "gpio55",
-+};
-+static const char * const tm2_groups[] = {
-+ "gpio55",
-+};
-+static const char * const atest_char1_groups[] = {
-+ "gpio56",
-+};
-+static const char * const tm_ack_groups[] = {
-+ "gpio56",
-+};
-+static const char * const wifi03_groups[] = {
-+ "gpio56",
-+};
-+static const char * const wifi13_groups[] = {
-+ "gpio56",
-+};
-+static const char * const qpic_pad4_groups[] = {
-+ "gpio57",
-+};
-+static const char * const atest_char0_groups[] = {
-+ "gpio57",
-+};
-+static const char * const tm3_groups[] = {
-+ "gpio57",
-+};
-+static const char * const wifi02_groups[] = {
-+ "gpio57",
-+};
-+static const char * const wifi12_groups[] = {
-+ "gpio57",
-+};
-+static const char * const qpic_pad5_groups[] = {
-+ "gpio58",
-+};
-+static const char * const smart3_groups[] = {
-+ "gpio58", "gpio59", "gpio60", "gpio61",
-+};
-+static const char * const wcss0_dbg14_groups[] = {
-+ "gpio58",
-+};
-+static const char * const tm4_groups[] = {
-+ "gpio58",
-+};
-+static const char * const wifi04_groups[] = {
-+ "gpio58",
-+};
-+static const char * const wifi14_groups[] = {
-+ "gpio58",
-+};
-+static const char * const qpic_pad6_groups[] = {
-+ "gpio59",
-+};
-+static const char * const wcss0_dbg15_groups[] = {
-+ "gpio59",
-+};
-+static const char * const qdss_tracectl_a_groups[] = {
-+ "gpio59",
-+};
-+static const char * const boot18_groups[] = {
-+ "gpio59",
-+};
-+static const char * const tm5_groups[] = {
-+ "gpio59",
-+};
-+static const char * const qpic_pad7_groups[] = {
-+ "gpio60",
-+};
-+static const char * const atest_char_groups[] = {
-+ "gpio60",
-+};
-+static const char * const wcss0_dbg4_groups[] = {
-+ "gpio60",
-+};
-+static const char * const qdss_traceclk_a_groups[] = {
-+ "gpio60",
-+};
-+static const char * const boot19_groups[] = {
-+ "gpio60",
-+};
-+static const char * const tm6_groups[] = {
-+ "gpio60",
-+};
-+static const char * const wcss0_dbg5_groups[] = {
-+ "gpio61",
-+};
-+static const char * const qdss_cti_trig_out_a0_groups[] = {
-+ "gpio61",
-+};
-+static const char * const boot14_groups[] = {
-+ "gpio61",
-+};
-+static const char * const tm7_groups[] = {
-+ "gpio61",
-+};
-+static const char * const chip_rst_groups[] = {
-+ "gpio62",
-+};
-+static const char * const wcss0_dbg6_groups[] = {
-+ "gpio62",
-+};
-+static const char * const qdss_cti_trig_out_b0_groups[] = {
-+ "gpio62",
-+};
-+static const char * const boot11_groups[] = {
-+ "gpio62",
-+};
-+static const char * const tm8_groups[] = {
-+ "gpio62",
-+};
-+static const char * const wcss0_dbg7_groups[] = {
-+ "gpio63",
-+};
-+static const char * const wcss1_dbg7_groups[] = {
-+ "gpio63",
-+};
-+static const char * const boot20_groups[] = {
-+ "gpio63",
-+};
-+static const char * const tm9_groups[] = {
-+ "gpio63",
-+};
-+static const char * const qpic_pad1_groups[] = {
-+ "gpio64",
-+};
-+static const char * const wcss0_dbg8_groups[] = {
-+ "gpio64",
-+};
-+static const char * const wcss1_dbg8_groups[] = {
-+ "gpio64",
-+};
-+static const char * const qpic_pad2_groups[] = {
-+ "gpio65",
-+};
-+static const char * const wcss0_dbg9_groups[] = {
-+ "gpio65",
-+};
-+static const char * const wcss1_dbg9_groups[] = {
-+ "gpio65",
-+};
-+static const char * const qpic_pad3_groups[] = {
-+ "gpio66",
-+};
-+static const char * const wcss0_dbg10_groups[] = {
-+ "gpio66",
-+};
-+static const char * const wcss1_dbg10_groups[] = {
-+ "gpio66",
-+};
-+static const char * const qpic_pad0_groups[] = {
-+ "gpio67",
-+};
-+static const char * const wcss0_dbg11_groups[] = {
-+ "gpio67",
-+};
-+static const char * const wcss1_dbg11_groups[] = {
-+ "gpio67",
-+};
-+static const char * const qpic_pad8_groups[] = {
-+ "gpio68",
-+};
-+static const char * const wcss0_dbg12_groups[] = {
-+ "gpio68",
-+};
-+static const char * const wcss1_dbg12_groups[] = {
-+ "gpio68",
-+};
-+static const char * const wifi034_groups[] = {
-+ "gpio98",
-+};
-+static const char * const wifi134_groups[] = {
-+ "gpio98",
-+};
-+static const char * const jtag_tdi_groups[] = {
-+ "gpio0",
-+};
- static const char * const gpio_groups[] = {
- "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
- "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
-@@ -303,13 +818,103 @@ static const char * const gpio_groups[]
- "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
- "gpio99",
- };
--
-+static const char * const i2s_rx_bclk_groups[] = {
-+ "gpio0", "gpio21", "gpio60",
-+};
-+static const char * const jtag_tck_groups[] = {
-+ "gpio1",
-+};
-+static const char * const i2s_rx_fsync_groups[] = {
-+ "gpio1", "gpio22", "gpio61",
-+};
-+static const char * const jtag_tms_groups[] = {
-+ "gpio2",
-+};
-+static const char * const i2s_rxd_groups[] = {
-+ "gpio2", "gpio23", "gpio63",
-+};
-+static const char * const smart0_groups[] = {
-+ "gpio0", "gpio1", "gpio2", "gpio5", "gpio44", "gpio45", "gpio46",
-+ "gpio47",
-+};
-+static const char * const jtag_tdo_groups[] = {
-+ "gpio3",
-+};
-+static const char * const jtag_rst_groups[] = {
-+ "gpio4",
-+};
-+static const char * const jtag_trst_groups[] = {
-+ "gpio5",
-+};
-+static const char * const mdio0_groups[] = {
-+ "gpio6",
-+};
-+static const char * const wcss0_dbg18_groups[] = {
-+ "gpio6", "gpio22", "gpio39",
-+};
-+static const char * const wcss1_dbg18_groups[] = {
-+ "gpio6", "gpio22", "gpio39",
-+};
-+static const char * const qdss_tracedata_a_groups[] = {
-+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11", "gpio16",
-+ "gpio17", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
-+ "gpio43",
-+};
-+static const char * const mdc_groups[] = {
-+ "gpio7", "gpio52",
-+};
-+static const char * const wcss0_dbg19_groups[] = {
-+ "gpio7", "gpio23", "gpio40",
-+};
-+static const char * const wcss1_dbg19_groups[] = {
-+ "gpio7", "gpio23", "gpio40",
-+};
- static const char * const blsp_uart1_groups[] = {
- "gpio8", "gpio9", "gpio10", "gpio11",
- };
-+static const char * const wifi0_uart_groups[] = {
-+ "gpio8", "gpio9", "gpio11", "gpio19", "gpio62",
-+};
-+static const char * const wifi1_uart_groups[] = {
-+ "gpio8", "gpio11", "gpio19", "gpio62", "gpio63",
-+};
-+static const char * const smart1_groups[] = {
-+ "gpio8", "gpio9", "gpio16", "gpio17", "gpio58", "gpio59", "gpio60",
-+ "gpio61",
-+};
-+static const char * const wcss0_dbg20_groups[] = {
-+ "gpio8", "gpio24", "gpio41",
-+};
-+static const char * const wcss1_dbg20_groups[] = {
-+ "gpio8", "gpio24", "gpio41",
-+};
-+static const char * const wifi0_uart0_groups[] = {
-+ "gpio9", "gpio10",
-+};
-+static const char * const wifi1_uart0_groups[] = {
-+ "gpio9", "gpio10",
-+};
-+static const char * const wcss0_dbg21_groups[] = {
-+ "gpio9", "gpio25", "gpio42",
-+};
-+static const char * const wcss1_dbg21_groups[] = {
-+ "gpio9", "gpio25", "gpio42",
-+};
- static const char * const blsp_i2c0_groups[] = {
- "gpio10", "gpio11", "gpio20", "gpio21", "gpio58", "gpio59",
- };
-+static const char * const wcss0_dbg22_groups[] = {
-+ "gpio10", "gpio26", "gpio43",
-+};
-+static const char * const wcss1_dbg22_groups[] = {
-+ "gpio10", "gpio26", "gpio43",
-+};
-+static const char * const wcss0_dbg23_groups[] = {
-+ "gpio11", "gpio27", "gpio44",
-+};
-+static const char * const wcss1_dbg23_groups[] = {
-+ "gpio11", "gpio27", "gpio44",
-+};
- static const char * const blsp_spi0_groups[] = {
- "gpio12", "gpio13", "gpio14", "gpio15", "gpio45",
- "gpio54", "gpio55", "gpio56", "gpio57",
-@@ -317,94 +922,582 @@ static const char * const blsp_spi0_grou
- static const char * const blsp_i2c1_groups[] = {
- "gpio12", "gpio13", "gpio34", "gpio35",
- };
-+static const char * const wcss0_dbg24_groups[] = {
-+ "gpio12", "gpio28", "gpio45",
-+};
-+static const char * const wcss1_dbg24_groups[] = {
-+ "gpio12", "gpio28", "gpio45",
-+};
-+static const char * const wcss0_dbg25_groups[] = {
-+ "gpio13", "gpio29", "gpio46",
-+};
-+static const char * const wcss1_dbg25_groups[] = {
-+ "gpio13", "gpio29", "gpio46",
-+};
-+static const char * const wcss0_dbg26_groups[] = {
-+ "gpio14", "gpio30", "gpio47",
-+};
-+static const char * const wcss1_dbg26_groups[] = {
-+ "gpio14", "gpio30", "gpio47",
-+};
-+static const char * const wcss0_dbg_groups[] = {
-+ "gpio15", "gpio69",
-+};
-+static const char * const wcss1_dbg_groups[] = {
-+ "gpio15",
-+};
- static const char * const blsp_uart0_groups[] = {
- "gpio16", "gpio17", "gpio60", "gpio61",
- };
--static const char * const blsp_spi1_groups[] = {
-- "gpio44", "gpio45", "gpio46", "gpio47",
-+static const char * const led0_groups[] = {
-+ "gpio16", "gpio36", "gpio60",
-+};
-+static const char * const wcss0_dbg28_groups[] = {
-+ "gpio16", "gpio32", "gpio49",
-+};
-+static const char * const wcss1_dbg28_groups[] = {
-+ "gpio16", "gpio32", "gpio49",
-+};
-+static const char * const led1_groups[] = {
-+ "gpio17", "gpio37", "gpio61",
-+};
-+static const char * const wcss0_dbg29_groups[] = {
-+ "gpio17", "gpio33", "gpio50",
-+};
-+static const char * const wcss1_dbg29_groups[] = {
-+ "gpio17", "gpio33", "gpio50",
-+};
-+static const char * const wifi0_uart1_groups[] = {
-+ "gpio18", "gpio63",
-+};
-+static const char * const wifi1_uart1_groups[] = {
-+ "gpio18", "gpio63",
-+};
-+static const char * const wcss0_dbg30_groups[] = {
-+ "gpio18", "gpio34", "gpio51",
-+};
-+static const char * const wcss1_dbg30_groups[] = {
-+ "gpio18", "gpio34", "gpio51",
-+};
-+static const char * const wcss0_dbg31_groups[] = {
-+ "gpio19", "gpio35", "gpio52",
-+};
-+static const char * const wcss1_dbg31_groups[] = {
-+ "gpio19", "gpio35",
-+};
-+static const char * const i2s_rx_mclk_groups[] = {
-+ "gpio20", "gpio58",
-+};
-+static const char * const wcss0_dbg16_groups[] = {
-+ "gpio20", "gpio37",
-+};
-+static const char * const wcss1_dbg16_groups[] = {
-+ "gpio20", "gpio37",
-+};
-+static const char * const wcss0_dbg17_groups[] = {
-+ "gpio21", "gpio38",
-+};
-+static const char * const wcss1_dbg17_groups[] = {
-+ "gpio21", "gpio38",
-+};
-+static const char * const rgmii0_groups[] = {
-+ "gpio22", "gpio28",
-+};
-+static const char * const sdio0_groups[] = {
-+ "gpio23",
-+};
-+static const char * const rgmii1_groups[] = {
-+ "gpio23", "gpio29",
-+};
-+static const char * const sdio1_groups[] = {
-+ "gpio24",
-+};
-+static const char * const rgmii2_groups[] = {
-+ "gpio24", "gpio30",
-+};
-+static const char * const i2s_tx_mclk_groups[] = {
-+ "gpio24", "gpio52",
-+};
-+static const char * const sdio2_groups[] = {
-+ "gpio25",
-+};
-+static const char * const rgmii3_groups[] = {
-+ "gpio25", "gpio31",
-+};
-+static const char * const i2s_tx_bclk_groups[] = {
-+ "gpio25", "gpio53", "gpio60",
-+};
-+static const char * const sdio3_groups[] = {
-+ "gpio26",
-+};
-+static const char * const rgmii_rx_groups[] = {
-+ "gpio26",
-+};
-+static const char * const i2s_tx_fsync_groups[] = {
-+ "gpio26", "gpio57", "gpio61",
-+};
-+static const char * const sdio_clk_groups[] = {
-+ "gpio27",
-+};
-+static const char * const rgmii_txc_groups[] = {
-+ "gpio27",
-+};
-+static const char * const i2s_td1_groups[] = {
-+ "gpio27", "gpio54", "gpio63",
-+};
-+static const char * const sdio_cmd_groups[] = {
-+ "gpio28",
-+};
-+static const char * const i2s_td2_groups[] = {
-+ "gpio28", "gpio55",
-+};
-+static const char * const sdio4_groups[] = {
-+ "gpio29",
-+};
-+static const char * const i2s_td3_groups[] = {
-+ "gpio29", "gpio56",
-+};
-+static const char * const sdio5_groups[] = {
-+ "gpio30",
-+};
-+static const char * const audio_pwm0_groups[] = {
-+ "gpio30", "gpio64",
-+};
-+static const char * const sdio6_groups[] = {
-+ "gpio31",
-+};
-+static const char * const audio_pwm1_groups[] = {
-+ "gpio31", "gpio65",
-+};
-+static const char * const wcss0_dbg27_groups[] = {
-+ "gpio31", "gpio48",
-+};
-+static const char * const wcss1_dbg27_groups[] = {
-+ "gpio31", "gpio48",
-+};
-+static const char * const sdio7_groups[] = {
-+ "gpio32",
-+};
-+static const char * const rgmii_rxc_groups[] = {
-+ "gpio32",
-+};
-+static const char * const audio_pwm2_groups[] = {
-+ "gpio32", "gpio66",
-+};
-+static const char * const rgmii_tx_groups[] = {
-+ "gpio33",
-+};
-+static const char * const audio_pwm3_groups[] = {
-+ "gpio33", "gpio67",
-+};
-+static const char * const boot2_groups[] = {
-+ "gpio33",
-+};
-+static const char * const i2s_spdif_in_groups[] = {
-+ "gpio34", "gpio59", "gpio63",
-+};
-+static const char * const i2s_spdif_out_groups[] = {
-+ "gpio35", "gpio62", "gpio63",
-+};
-+static const char * const rmii00_groups[] = {
-+ "gpio36", "gpio41",
-+};
-+static const char * const led2_groups[] = {
-+ "gpio36", "gpio38", "gpio58",
-+};
-+static const char * const rmii01_groups[] = {
-+ "gpio37", "gpio42",
-+};
-+static const char * const wifi0_wci_groups[] = {
-+ "gpio37",
-+};
-+static const char * const wifi1_wci_groups[] = {
-+ "gpio37",
-+};
-+static const char * const boot4_groups[] = {
-+ "gpio37",
-+};
-+static const char * const rmii0_tx_groups[] = {
-+ "gpio38",
-+};
-+static const char * const boot5_groups[] = {
-+ "gpio38",
-+};
-+static const char * const rmii0_rx_groups[] = {
-+ "gpio39",
-+};
-+static const char * const pcie_clk1_groups[] = {
-+ "gpio39",
-+};
-+static const char * const led3_groups[] = {
-+ "gpio39",
-+};
-+static const char * const sdio_cd_groups[] = {
-+ "gpio22",
- };
-
- static const struct msm_function ipq4019_functions[] = {
-+ FUNCTION(rmii0_refclk),
-+ FUNCTION(wifi0_rfsilient0),
-+ FUNCTION(wifi1_rfsilient0),
-+ FUNCTION(smart2),
-+ FUNCTION(led4),
-+ FUNCTION(wifi0_cal),
-+ FUNCTION(wifi1_cal),
-+ FUNCTION(wifi_wci0),
-+ FUNCTION(rmii0_dv),
-+ FUNCTION(wifi_wci1),
-+ FUNCTION(rmii1_refclk),
-+ FUNCTION(blsp_spi1),
-+ FUNCTION(led5),
-+ FUNCTION(rmii10),
-+ FUNCTION(led6),
-+ FUNCTION(rmii11),
-+ FUNCTION(led7),
-+ FUNCTION(rmii1_dv),
-+ FUNCTION(led8),
-+ FUNCTION(rmii1_tx),
-+ FUNCTION(aud_pin),
-+ FUNCTION(led9),
-+ FUNCTION(rmii1_rx),
-+ FUNCTION(led10),
-+ FUNCTION(wifi0_rfsilient1),
-+ FUNCTION(wifi1_rfsilient1),
-+ FUNCTION(led11),
-+ FUNCTION(boot7),
-+ FUNCTION(qpic_pad),
-+ FUNCTION(pcie_clk),
-+ FUNCTION(tm_clk0),
-+ FUNCTION(wifi00),
-+ FUNCTION(wifi10),
-+ FUNCTION(mdio1),
-+ FUNCTION(prng_rosc),
-+ FUNCTION(dbg_out),
-+ FUNCTION(tm0),
-+ FUNCTION(wifi01),
-+ FUNCTION(wifi11),
-+ FUNCTION(atest_char3),
-+ FUNCTION(pmu0),
-+ FUNCTION(boot8),
-+ FUNCTION(tm1),
-+ FUNCTION(atest_char2),
-+ FUNCTION(pmu1),
-+ FUNCTION(boot9),
-+ FUNCTION(tm2),
-+ FUNCTION(atest_char1),
-+ FUNCTION(tm_ack),
-+ FUNCTION(wifi03),
-+ FUNCTION(wifi13),
-+ FUNCTION(qpic_pad4),
-+ FUNCTION(atest_char0),
-+ FUNCTION(tm3),
-+ FUNCTION(wifi02),
-+ FUNCTION(wifi12),
-+ FUNCTION(qpic_pad5),
-+ FUNCTION(smart3),
-+ FUNCTION(wcss0_dbg14),
-+ FUNCTION(tm4),
-+ FUNCTION(wifi04),
-+ FUNCTION(wifi14),
-+ FUNCTION(qpic_pad6),
-+ FUNCTION(wcss0_dbg15),
-+ FUNCTION(qdss_tracectl_a),
-+ FUNCTION(boot18),
-+ FUNCTION(tm5),
-+ FUNCTION(qpic_pad7),
-+ FUNCTION(atest_char),
-+ FUNCTION(wcss0_dbg4),
-+ FUNCTION(qdss_traceclk_a),
-+ FUNCTION(boot19),
-+ FUNCTION(tm6),
-+ FUNCTION(wcss0_dbg5),
-+ FUNCTION(qdss_cti_trig_out_a0),
-+ FUNCTION(boot14),
-+ FUNCTION(tm7),
-+ FUNCTION(chip_rst),
-+ FUNCTION(wcss0_dbg6),
-+ FUNCTION(qdss_cti_trig_out_b0),
-+ FUNCTION(boot11),
-+ FUNCTION(tm8),
-+ FUNCTION(wcss0_dbg7),
-+ FUNCTION(wcss1_dbg7),
-+ FUNCTION(boot20),
-+ FUNCTION(tm9),
-+ FUNCTION(qpic_pad1),
-+ FUNCTION(wcss0_dbg8),
-+ FUNCTION(wcss1_dbg8),
-+ FUNCTION(qpic_pad2),
-+ FUNCTION(wcss0_dbg9),
-+ FUNCTION(wcss1_dbg9),
-+ FUNCTION(qpic_pad3),
-+ FUNCTION(wcss0_dbg10),
-+ FUNCTION(wcss1_dbg10),
-+ FUNCTION(qpic_pad0),
-+ FUNCTION(wcss0_dbg11),
-+ FUNCTION(wcss1_dbg11),
-+ FUNCTION(qpic_pad8),
-+ FUNCTION(wcss0_dbg12),
-+ FUNCTION(wcss1_dbg12),
-+ FUNCTION(wifi034),
-+ FUNCTION(wifi134),
-+ FUNCTION(jtag_tdi),
- FUNCTION(gpio),
-+ FUNCTION(i2s_rx_bclk),
-+ FUNCTION(jtag_tck),
-+ FUNCTION(i2s_rx_fsync),
-+ FUNCTION(jtag_tms),
-+ FUNCTION(i2s_rxd),
-+ FUNCTION(smart0),
-+ FUNCTION(jtag_tdo),
-+ FUNCTION(jtag_rst),
-+ FUNCTION(jtag_trst),
-+ FUNCTION(mdio0),
-+ FUNCTION(wcss0_dbg18),
-+ FUNCTION(wcss1_dbg18),
-+ FUNCTION(qdss_tracedata_a),
-+ FUNCTION(mdc),
-+ FUNCTION(wcss0_dbg19),
-+ FUNCTION(wcss1_dbg19),
- FUNCTION(blsp_uart1),
-+ FUNCTION(wifi0_uart),
-+ FUNCTION(wifi1_uart),
-+ FUNCTION(smart1),
-+ FUNCTION(wcss0_dbg20),
-+ FUNCTION(wcss1_dbg20),
-+ FUNCTION(wifi0_uart0),
-+ FUNCTION(wifi1_uart0),
-+ FUNCTION(wcss0_dbg21),
-+ FUNCTION(wcss1_dbg21),
- FUNCTION(blsp_i2c0),
-+ FUNCTION(wcss0_dbg22),
-+ FUNCTION(wcss1_dbg22),
-+ FUNCTION(wcss0_dbg23),
-+ FUNCTION(wcss1_dbg23),
-+ FUNCTION(blsp_spi0),
- FUNCTION(blsp_i2c1),
-+ FUNCTION(wcss0_dbg24),
-+ FUNCTION(wcss1_dbg24),
-+ FUNCTION(wcss0_dbg25),
-+ FUNCTION(wcss1_dbg25),
-+ FUNCTION(wcss0_dbg26),
-+ FUNCTION(wcss1_dbg26),
-+ FUNCTION(wcss0_dbg),
-+ FUNCTION(wcss1_dbg),
- FUNCTION(blsp_uart0),
-- FUNCTION(blsp_spi1),
-- FUNCTION(blsp_spi0),
-+ FUNCTION(led0),
-+ FUNCTION(wcss0_dbg28),
-+ FUNCTION(wcss1_dbg28),
-+ FUNCTION(led1),
-+ FUNCTION(wcss0_dbg29),
-+ FUNCTION(wcss1_dbg29),
-+ FUNCTION(wifi0_uart1),
-+ FUNCTION(wifi1_uart1),
-+ FUNCTION(wcss0_dbg30),
-+ FUNCTION(wcss1_dbg30),
-+ FUNCTION(wcss0_dbg31),
-+ FUNCTION(wcss1_dbg31),
-+ FUNCTION(i2s_rx_mclk),
-+ FUNCTION(wcss0_dbg16),
-+ FUNCTION(wcss1_dbg16),
-+ FUNCTION(wcss0_dbg17),
-+ FUNCTION(wcss1_dbg17),
-+ FUNCTION(rgmii0),
-+ FUNCTION(sdio0),
-+ FUNCTION(rgmii1),
-+ FUNCTION(sdio1),
-+ FUNCTION(rgmii2),
-+ FUNCTION(i2s_tx_mclk),
-+ FUNCTION(sdio2),
-+ FUNCTION(rgmii3),
-+ FUNCTION(i2s_tx_bclk),
-+ FUNCTION(sdio3),
-+ FUNCTION(rgmii_rx),
-+ FUNCTION(i2s_tx_fsync),
-+ FUNCTION(sdio_clk),
-+ FUNCTION(rgmii_txc),
-+ FUNCTION(i2s_td1),
-+ FUNCTION(sdio_cmd),
-+ FUNCTION(i2s_td2),
-+ FUNCTION(sdio4),
-+ FUNCTION(i2s_td3),
-+ FUNCTION(sdio5),
-+ FUNCTION(audio_pwm0),
-+ FUNCTION(sdio6),
-+ FUNCTION(audio_pwm1),
-+ FUNCTION(wcss0_dbg27),
-+ FUNCTION(wcss1_dbg27),
-+ FUNCTION(sdio7),
-+ FUNCTION(rgmii_rxc),
-+ FUNCTION(audio_pwm2),
-+ FUNCTION(rgmii_tx),
-+ FUNCTION(audio_pwm3),
-+ FUNCTION(boot2),
-+ FUNCTION(i2s_spdif_in),
-+ FUNCTION(i2s_spdif_out),
-+ FUNCTION(rmii00),
-+ FUNCTION(led2),
-+ FUNCTION(rmii01),
-+ FUNCTION(wifi0_wci),
-+ FUNCTION(wifi1_wci),
-+ FUNCTION(boot4),
-+ FUNCTION(rmii0_tx),
-+ FUNCTION(boot5),
-+ FUNCTION(rmii0_rx),
-+ FUNCTION(pcie_clk1),
-+ FUNCTION(led3),
-+ FUNCTION(sdio_cd),
- };
-
- static const struct msm_pingroup ipq4019_groups[] = {
-- PINGROUP(0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(6, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(7, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(8, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(9, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(10, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(11, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(12, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(13, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(14, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(15, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(16, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(17, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(18, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(19, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(20, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(21, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(22, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(23, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(24, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(25, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(26, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(27, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(28, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(29, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(30, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(31, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(32, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(33, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(34, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(35, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(36, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(37, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(39, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(40, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(41, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(42, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(43, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(44, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(45, NA, blsp_spi1, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(46, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(47, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(48, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(49, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(50, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(51, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(52, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(53, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(54, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(55, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(56, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(57, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(58, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(59, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(60, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(61, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(62, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(63, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(65, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(0, jtag_tdi, smart0, i2s_rx_bclk, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA, NA, NA),
-+ PINGROUP(1, jtag_tck, smart0, i2s_rx_fsync, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA, NA, NA),
-+ PINGROUP(2, jtag_tms, smart0, i2s_rxd, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA, NA),
-+ PINGROUP(3, jtag_tdo, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA),
-+ PINGROUP(4, jtag_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA),
-+ PINGROUP(5, jtag_trst, smart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA),
-+ PINGROUP(6, mdio0, NA, wcss0_dbg18, wcss1_dbg18, NA, qdss_tracedata_a,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(7, mdc, NA, wcss0_dbg19, wcss1_dbg19, NA, qdss_tracedata_a,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(8, blsp_uart1, wifi0_uart, wifi1_uart, smart1, NA,
-+ wcss0_dbg20, wcss1_dbg20, NA, qdss_tracedata_a, NA, NA, NA,
-+ NA, NA),
-+ PINGROUP(9, blsp_uart1, wifi0_uart0, wifi1_uart0, smart1, wifi0_uart,
-+ NA, wcss0_dbg21, wcss1_dbg21, NA, qdss_tracedata_a, NA, NA,
-+ NA, NA),
-+ PINGROUP(10, blsp_uart1, wifi0_uart0, wifi1_uart0, blsp_i2c0, NA,
-+ wcss0_dbg22, wcss1_dbg22, NA, qdss_tracedata_a, NA, NA, NA,
-+ NA, NA),
-+ PINGROUP(11, blsp_uart1, wifi0_uart, wifi1_uart, blsp_i2c0, NA,
-+ wcss0_dbg23, wcss1_dbg23, NA, qdss_tracedata_a, NA, NA, NA,
-+ NA, NA),
-+ PINGROUP(12, blsp_spi0, blsp_i2c1, NA, wcss0_dbg24, wcss1_dbg24, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(13, blsp_spi0, blsp_i2c1, NA, wcss0_dbg25, wcss1_dbg25, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(14, blsp_spi0, NA, wcss0_dbg26, wcss1_dbg26, NA, NA, NA, NA,
-+ NA, NA, NA, NA, NA, NA),
-+ PINGROUP(15, blsp_spi0, NA, wcss0_dbg, wcss1_dbg, NA, NA, NA, NA, NA,
-+ NA, NA, NA, NA, NA),
-+ PINGROUP(16, blsp_uart0, led0, smart1, NA, wcss0_dbg28, wcss1_dbg28,
-+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(17, blsp_uart0, led1, smart1, NA, wcss0_dbg29, wcss1_dbg29,
-+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(18, wifi0_uart1, wifi1_uart1, NA, wcss0_dbg30, wcss1_dbg30,
-+ NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(19, wifi0_uart, wifi1_uart, NA, wcss0_dbg31, wcss1_dbg31, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(20, blsp_i2c0, i2s_rx_mclk, NA, wcss0_dbg16, wcss1_dbg16, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(21, blsp_i2c0, i2s_rx_bclk, NA, wcss0_dbg17, wcss1_dbg17, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(22, rgmii0, i2s_rx_fsync, NA, wcss0_dbg18, wcss1_dbg18, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(23, sdio0, rgmii1, i2s_rxd, NA, wcss0_dbg19, wcss1_dbg19, NA,
-+ NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(24, sdio1, rgmii2, i2s_tx_mclk, NA, wcss0_dbg20, wcss1_dbg20,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(25, sdio2, rgmii3, i2s_tx_bclk, NA, wcss0_dbg21, wcss1_dbg21,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(26, sdio3, rgmii_rx, i2s_tx_fsync, NA, wcss0_dbg22,
-+ wcss1_dbg22, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(27, sdio_clk, rgmii_txc, i2s_td1, NA, wcss0_dbg23,
-+ wcss1_dbg23, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(28, sdio_cmd, rgmii0, i2s_td2, NA, wcss0_dbg24, wcss1_dbg24,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(29, sdio4, rgmii1, i2s_td3, NA, wcss0_dbg25, wcss1_dbg25, NA,
-+ NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(30, sdio5, rgmii2, audio_pwm0, NA, wcss0_dbg26, wcss1_dbg26,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(31, sdio6, rgmii3, audio_pwm1, NA, wcss0_dbg27, wcss1_dbg27,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(32, sdio7, rgmii_rxc, audio_pwm2, NA, wcss0_dbg28,
-+ wcss1_dbg28, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(33, rgmii_tx, audio_pwm3, NA, wcss0_dbg29, wcss1_dbg29, NA,
-+ boot2, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(34, blsp_i2c1, i2s_spdif_in, NA, wcss0_dbg30, wcss1_dbg30, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(35, blsp_i2c1, i2s_spdif_out, NA, wcss0_dbg31, wcss1_dbg31,
-+ NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(36, rmii00, led2, led0, NA, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA),
-+ PINGROUP(37, rmii01, wifi0_wci, wifi1_wci, led1, NA, NA, wcss0_dbg16,
-+ wcss1_dbg16, NA, qdss_tracedata_a, boot4, NA, NA, NA),
-+ PINGROUP(38, rmii0_tx, led2, NA, NA, wcss0_dbg17, wcss1_dbg17, NA,
-+ qdss_tracedata_a, boot5, NA, NA, NA, NA, NA),
-+ PINGROUP(39, rmii0_rx, pcie_clk1, led3, NA, NA, wcss0_dbg18,
-+ wcss1_dbg18, NA, NA, qdss_tracedata_a, NA, NA, NA, NA),
-+ PINGROUP(40, rmii0_refclk, wifi0_rfsilient0, wifi1_rfsilient0, smart2,
-+ led4, NA, NA, wcss0_dbg19, wcss1_dbg19, NA, NA,
-+ qdss_tracedata_a, NA, NA),
-+ PINGROUP(41, rmii00, wifi0_cal, wifi1_cal, smart2, NA, NA, wcss0_dbg20,
-+ wcss1_dbg20, NA, NA, qdss_tracedata_a, NA, NA, NA),
-+ PINGROUP(42, rmii01, wifi_wci0, NA, NA, wcss0_dbg21, wcss1_dbg21, NA,
-+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
-+ PINGROUP(43, rmii0_dv, wifi_wci1, NA, NA, wcss0_dbg22, wcss1_dbg22, NA,
-+ NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
-+ PINGROUP(44, rmii1_refclk, blsp_spi1, smart0, led5, NA, NA,
-+ wcss0_dbg23, wcss1_dbg23, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(45, rmii10, blsp_spi1, blsp_spi0, smart0, led6, NA, NA,
-+ wcss0_dbg24, wcss1_dbg24, NA, NA, NA, NA, NA),
-+ PINGROUP(46, rmii11, blsp_spi1, smart0, led7, NA, NA, wcss0_dbg25,
-+ wcss1_dbg25, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(47, rmii1_dv, blsp_spi1, smart0, led8, NA, NA, wcss0_dbg26,
-+ wcss1_dbg26, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(48, rmii1_tx, aud_pin, smart2, led9, NA, NA, wcss0_dbg27,
-+ wcss1_dbg27, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(49, rmii1_rx, aud_pin, smart2, led10, NA, NA, wcss0_dbg28,
-+ wcss1_dbg28, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(50, rmii10, aud_pin, wifi0_rfsilient1, wifi1_rfsilient1,
-+ led11, NA, NA, wcss0_dbg29, wcss1_dbg29, NA, NA, NA, NA, NA),
-+ PINGROUP(51, rmii11, aud_pin, wifi0_cal, wifi1_cal, NA, NA,
-+ wcss0_dbg30, wcss1_dbg30, NA, boot7, NA, NA, NA, NA),
-+ PINGROUP(52, qpic_pad, mdc, pcie_clk, i2s_tx_mclk, NA, NA, wcss0_dbg31,
-+ tm_clk0, wifi00, wifi10, NA, NA, NA, NA),
-+ PINGROUP(53, qpic_pad, mdio1, i2s_tx_bclk, prng_rosc, dbg_out, tm0,
-+ wifi01, wifi11, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(54, qpic_pad, blsp_spi0, i2s_td1, atest_char3, pmu0, NA, NA,
-+ boot8, tm1, NA, NA, NA, NA, NA),
-+ PINGROUP(55, qpic_pad, blsp_spi0, i2s_td2, atest_char2, pmu1, NA, NA,
-+ boot9, tm2, NA, NA, NA, NA, NA),
-+ PINGROUP(56, qpic_pad, blsp_spi0, i2s_td3, atest_char1, NA, tm_ack,
-+ wifi03, wifi13, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(57, qpic_pad4, blsp_spi0, i2s_tx_fsync, atest_char0, NA, tm3,
-+ wifi02, wifi12, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(58, qpic_pad5, led2, blsp_i2c0, smart3, smart1, i2s_rx_mclk,
-+ NA, wcss0_dbg14, tm4, wifi04, wifi14, NA, NA, NA),
-+ PINGROUP(59, qpic_pad6, blsp_i2c0, smart3, smart1, i2s_spdif_in, NA,
-+ NA, wcss0_dbg15, qdss_tracectl_a, boot18, tm5, NA, NA, NA),
-+ PINGROUP(60, qpic_pad7, blsp_uart0, smart1, smart3, led0, i2s_tx_bclk,
-+ i2s_rx_bclk, atest_char, NA, wcss0_dbg4, qdss_traceclk_a,
-+ boot19, tm6, NA),
-+ PINGROUP(61, qpic_pad, blsp_uart0, smart1, smart3, led1, i2s_tx_fsync,
-+ i2s_rx_fsync, NA, NA, wcss0_dbg5, qdss_cti_trig_out_a0,
-+ boot14, tm7, NA),
-+ PINGROUP(62, qpic_pad, chip_rst, wifi0_uart, wifi1_uart, i2s_spdif_out,
-+ NA, NA, wcss0_dbg6, qdss_cti_trig_out_b0, boot11, tm8, NA, NA,
-+ NA),
-+ PINGROUP(63, qpic_pad, wifi0_uart1, wifi1_uart1, wifi1_uart, i2s_td1,
-+ i2s_rxd, i2s_spdif_out, i2s_spdif_in, NA, wcss0_dbg7,
-+ wcss1_dbg7, boot20, tm9, NA),
-+ PINGROUP(64, qpic_pad1, audio_pwm0, NA, wcss0_dbg8, wcss1_dbg8, NA, NA,
-+ NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(65, qpic_pad2, audio_pwm1, NA, wcss0_dbg9, wcss1_dbg9, NA, NA,
-+ NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(66, qpic_pad3, audio_pwm2, NA, wcss0_dbg10, wcss1_dbg10, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(67, qpic_pad0, audio_pwm3, NA, wcss0_dbg11, wcss1_dbg11, NA,
-+ NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(68, qpic_pad8, NA, wcss0_dbg12, wcss1_dbg12, NA, NA, NA, NA,
-+ NA, NA, NA, NA, NA, NA),
-+ PINGROUP(69, qpic_pad, NA, wcss0_dbg, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA, NA),
- PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(71, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(72, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-@@ -433,7 +1526,8 @@ static const struct msm_pingroup ipq4019
- PINGROUP(95, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(96, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(97, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(98, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(98, wifi034, wifi134, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA,
-+ NA, NA),
- PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- };
-
-@@ -460,6 +1554,7 @@ static const struct of_device_id ipq4019
- static struct platform_driver ipq4019_pinctrl_driver = {
- .driver = {
- .name = "ipq4019-pinctrl",
-+ .owner = THIS_MODULE,
- .of_match_table = ipq4019_pinctrl_of_match,
- },
- .probe = ipq4019_pinctrl_probe,
diff --git a/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch b/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch
deleted file mode 100644
index 07cf01b268..0000000000
--- a/target/linux/ipq806x/patches-4.9/859-msm-pinctrl-Add-support-to-configure-ipq40xx-GPIO_PU.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From e77af7de404eb464f7da9e0daeb8b362cc66a7ba Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Tue, 9 May 2017 11:45:00 +0530
-Subject: [PATCH] msm: pinctrl: Add support to configure ipq40xx GPIO_PULL bits
-
-GPIO_PULL bits configurations in TLMM_GPIO_CFG register
-differs for IPQ40xx from rest of the other qcom SoC's.
-This change add support to configure the msm_gpio_pull
-bits for ipq40xx, It is required to fix the proper
-configurations of gpio-pull bits for nand pins mux.
-
-IPQ40xx SoC:
-2'b10: Internal pull up enable.
-2'b11: Unsupport
-
-For other SoC's:
-2'b10: Keeper
-2'b11: Pull-Up
-
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- drivers/pinctrl/qcom/pinctrl-apq8064.c | 1 +
- drivers/pinctrl/qcom/pinctrl-apq8084.c | 1 +
- drivers/pinctrl/qcom/pinctrl-ipq4019.c | 8 ++++++++
- drivers/pinctrl/qcom/pinctrl-ipq8064.c | 1 +
- drivers/pinctrl/qcom/pinctrl-mdm9615.c | 1 +
- drivers/pinctrl/qcom/pinctrl-msm.c | 21 ++++++++-------------
- drivers/pinctrl/qcom/pinctrl-msm.h | 19 +++++++++++++++++++
- drivers/pinctrl/qcom/pinctrl-msm8660.c | 1 +
- drivers/pinctrl/qcom/pinctrl-msm8916.c | 1 +
- drivers/pinctrl/qcom/pinctrl-msm8960.c | 1 +
- drivers/pinctrl/qcom/pinctrl-msm8x74.c | 1 +
- 11 files changed, 43 insertions(+), 13 deletions(-)
-
---- a/drivers/pinctrl/qcom/pinctrl-apq8064.c
-+++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c
-@@ -597,6 +597,7 @@ static const struct msm_pinctrl_soc_data
- .groups = apq8064_groups,
- .ngroups = ARRAY_SIZE(apq8064_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int apq8064_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-apq8084.c
-+++ b/drivers/pinctrl/qcom/pinctrl-apq8084.c
-@@ -1206,6 +1206,7 @@ static const struct msm_pinctrl_soc_data
- .groups = apq8084_groups,
- .ngroups = ARRAY_SIZE(apq8084_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int apq8084_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -1531,6 +1531,13 @@ static const struct msm_pingroup ipq4019
- PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- };
-
-+static const struct msm_pinctrl_gpio_pull ipq4019_gpio_pull = {
-+ .no_pull = 0,
-+ .pull_down = 1,
-+ .keeper = 0,
-+ .pull_up = 2,
-+};
-+
- static const struct msm_pinctrl_soc_data ipq4019_pinctrl = {
- .pins = ipq4019_pins,
- .npins = ARRAY_SIZE(ipq4019_pins),
-@@ -1539,6 +1546,7 @@ static const struct msm_pinctrl_soc_data
- .groups = ipq4019_groups,
- .ngroups = ARRAY_SIZE(ipq4019_groups),
- .ngpios = 100,
-+ .gpio_pull = &ipq4019_gpio_pull,
- };
-
- static int ipq4019_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
-@@ -630,6 +630,7 @@ static const struct msm_pinctrl_soc_data
- .groups = ipq8064_groups,
- .ngroups = ARRAY_SIZE(ipq8064_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int ipq8064_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-mdm9615.c
-+++ b/drivers/pinctrl/qcom/pinctrl-mdm9615.c
-@@ -444,6 +444,7 @@ static const struct msm_pinctrl_soc_data
- .groups = mdm9615_groups,
- .ngroups = ARRAY_SIZE(mdm9615_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int mdm9615_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-msm.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -203,11 +203,6 @@ static int msm_config_reg(struct msm_pin
- return 0;
- }
-
--#define MSM_NO_PULL 0
--#define MSM_PULL_DOWN 1
--#define MSM_KEEPER 2
--#define MSM_PULL_UP 3
--
- static unsigned msm_regval_to_drive(u32 val)
- {
- return (val + 1) * 2;
-@@ -238,16 +233,16 @@ static int msm_config_group_get(struct p
- /* Convert register value to pinconf value */
- switch (param) {
- case PIN_CONFIG_BIAS_DISABLE:
-- arg = arg == MSM_NO_PULL;
-+ arg = arg == pctrl->soc->gpio_pull->no_pull;
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
-- arg = arg == MSM_PULL_DOWN;
-+ arg = arg == pctrl->soc->gpio_pull->pull_down;
- break;
- case PIN_CONFIG_BIAS_BUS_HOLD:
-- arg = arg == MSM_KEEPER;
-+ arg = arg == pctrl->soc->gpio_pull->keeper;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
-- arg = arg == MSM_PULL_UP;
-+ arg = arg == pctrl->soc->gpio_pull->pull_up;
- break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- arg = msm_regval_to_drive(arg);
-@@ -304,16 +299,16 @@ static int msm_config_group_set(struct p
- /* Convert pinconf values to register values */
- switch (param) {
- case PIN_CONFIG_BIAS_DISABLE:
-- arg = MSM_NO_PULL;
-+ arg = pctrl->soc->gpio_pull->no_pull;
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
-- arg = MSM_PULL_DOWN;
-+ arg = pctrl->soc->gpio_pull->pull_down;
- break;
- case PIN_CONFIG_BIAS_BUS_HOLD:
-- arg = MSM_KEEPER;
-+ arg = pctrl->soc->gpio_pull->keeper;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
-- arg = MSM_PULL_UP;
-+ arg = pctrl->soc->gpio_pull->pull_up;
- break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- /* Check for invalid values */
---- a/drivers/pinctrl/qcom/pinctrl-msm.h
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
-@@ -98,6 +98,16 @@ struct msm_pingroup {
- };
-
- /**
-+ * struct msm_pinctrl_gpio_pull - pinctrl pull value bit field descriptor
-+ */
-+struct msm_pinctrl_gpio_pull {
-+ unsigned no_pull;
-+ unsigned pull_down;
-+ unsigned keeper;
-+ unsigned pull_up;
-+};
-+
-+/**
- * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration
- * @pins: An array describing all pins the pin controller affects.
- * @npins: The number of entries in @pins.
-@@ -106,6 +116,7 @@ struct msm_pingroup {
- * @groups: An array describing all pin groups the pin SoC supports.
- * @ngroups: The numbmer of entries in @groups.
- * @ngpio: The number of pingroups the driver should expose as GPIOs.
-+ * @gpio_pull_val: The pull value bit field descriptor.
- */
- struct msm_pinctrl_soc_data {
- const struct pinctrl_pin_desc *pins;
-@@ -115,6 +126,14 @@ struct msm_pinctrl_soc_data {
- const struct msm_pingroup *groups;
- unsigned ngroups;
- unsigned ngpios;
-+ const struct msm_pinctrl_gpio_pull *gpio_pull;
-+};
-+
-+static const struct msm_pinctrl_gpio_pull msm_gpio_pull = {
-+ .no_pull = 0,
-+ .pull_down = 1,
-+ .keeper = 2,
-+ .pull_up = 3,
- };
-
- int msm_pinctrl_probe(struct platform_device *pdev,
---- a/drivers/pinctrl/qcom/pinctrl-msm8660.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm8660.c
-@@ -979,6 +979,7 @@ static const struct msm_pinctrl_soc_data
- .groups = msm8660_groups,
- .ngroups = ARRAY_SIZE(msm8660_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int msm8660_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-msm8916.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm8916.c
-@@ -967,6 +967,7 @@ static const struct msm_pinctrl_soc_data
- .groups = msm8916_groups,
- .ngroups = ARRAY_SIZE(msm8916_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int msm8916_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-msm8960.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm8960.c
-@@ -1244,6 +1244,7 @@ static const struct msm_pinctrl_soc_data
- .groups = msm8960_groups,
- .ngroups = ARRAY_SIZE(msm8960_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int msm8960_pinctrl_probe(struct platform_device *pdev)
---- a/drivers/pinctrl/qcom/pinctrl-msm8x74.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm8x74.c
-@@ -1069,6 +1069,7 @@ static const struct msm_pinctrl_soc_data
- .groups = msm8x74_groups,
- .ngroups = ARRAY_SIZE(msm8x74_groups),
- .ngpios = NUM_GPIO_PINGROUPS,
-+ .gpio_pull = &msm_gpio_pull,
- };
-
- static int msm8x74_pinctrl_probe(struct platform_device *pdev)
diff --git a/target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch b/target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch
deleted file mode 100644
index 5a3c02c700..0000000000
--- a/target/linux/ipq806x/patches-4.9/860-qcom-mtd-nand-Add-bam_dma-support-in-qcom_nand-drive.patch
+++ /dev/null
@@ -1,370 +0,0 @@
-From 074036f9de6b8c5fc642e8e2540950f6a35aa804 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Thu, 20 Apr 2017 10:31:10 +0530
-Subject: [PATCH] qcom: mtd: nand: Add bam_dma support in qcom_nand driver
-
-The current driver only support ADM DMA so this patch adds the
-BAM DMA support in current NAND driver with compatible string
-qcom,ebi2-nandc-bam.
-Added bam channels and data buffers, NAND BAM uses 3 channels:
-command, data tx and data rx, while ADM uses only single channel.
-So this patch adds the BAM channel in device tree and using the
-same in NAND driver allocation function.
-
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- .../devicetree/bindings/mtd/qcom_nandc.txt | 69 +++++++--
- drivers/mtd/nand/qcom_nandc.c | 160 +++++++++++++++++----
- 2 files changed, 190 insertions(+), 39 deletions(-)
-
---- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
-+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
-@@ -1,21 +1,26 @@
- * Qualcomm NAND controller
-
- Required properties:
--- compatible: should be "qcom,ipq806x-nand"
-+- compatible: "qcom,ipq806x-nand" for IPQ8064 which uses
-+ ADM DMA.
-+ "qcom,ebi2-nand-bam" - nand drivers using BAM DMA
-+ like IPQ4019.
- - reg: MMIO address range
- - clocks: must contain core clock and always on clock
- - clock-names: must contain "core" for the core clock and "aon" for the
- always on clock
- - dmas: DMA specifier, consisting of a phandle to the ADM DMA
-- controller node and the channel number to be used for
-- NAND. Refer to dma.txt and qcom_adm.txt for more details
--- dma-names: must be "rxtx"
--- qcom,cmd-crci: must contain the ADM command type CRCI block instance
-- number specified for the NAND controller on the given
-- platform
--- qcom,data-crci: must contain the ADM data type CRCI block instance
-- number specified for the NAND controller on the given
-- platform
-+ or BAM DMA controller node and the channel number to
-+ be used for NAND. Refer to dma.txt, qcom_adm.txt(ADM)
-+ and qcom_bam_dma.txt(BAM) for more details
-+- dma-names: "rxtx" - ADM
-+ "tx", "rx", "cmd" - BAM
-+- qcom,cmd-crci: Only required for ADM DMA. must contain the ADM command
-+ type CRCI block instance number specified for the NAND
-+ controller on the given platform.
-+- qcom,data-crci: Only required for ADM DMA. must contain the ADM data
-+ type CRCI block instance number specified for the NAND
-+ controller on the given platform.
- - #address-cells: <1> - subnodes give the chip-select number
- - #size-cells: <0>
-
-@@ -44,7 +49,7 @@ partition.txt for more detail.
- Example:
-
- nand@1ac00000 {
-- compatible = "qcom,ebi2-nandc";
-+ compatible = "qcom,ipq806x-nand","qcom.qcom_nand";
- reg = <0x1ac00000 0x800>;
-
- clocks = <&gcc EBI2_CLK>,
-@@ -58,6 +63,48 @@ nand@1ac00000 {
-
- #address-cells = <1>;
- #size-cells = <0>;
-+
-+ nandcs@0 {
-+ compatible = "qcom,nandcs";
-+ reg = <0>;
-+
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ nand-bus-width = <8>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "boot-nand";
-+ reg = <0 0x58a0000>;
-+ };
-+
-+ partition@58a0000 {
-+ label = "fs-nand";
-+ reg = <0x58a0000 0x4000000>;
-+ };
-+ };
-+ };
-+};
-+
-+nand@79B0000 {
-+ compatible = "qcom,ebi2-nandc-bam";
-+ reg = <0x79B0000 0x1000>;
-+
-+ clocks = <&gcc EBI2_CLK>,
-+ <&gcc EBI2_AON_CLK>;
-+ clock-names = "core", "aon";
-+
-+ dmas = <&qpicbam 0>,
-+ <&qpicbam 1>,
-+ <&qpicbam 2>;
-+ dma-names = "tx", "rx", "cmd";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-
- nandcs@0 {
- compatible = "qcom,nandcs";
---- a/drivers/mtd/nand/qcom_nandc.c
-+++ b/drivers/mtd/nand/qcom_nandc.c
-@@ -234,6 +234,7 @@ struct nandc_regs {
- * by upper layers directly
- * @buf_size/count/start: markers for chip->read_buf/write_buf functions
- * @reg_read_buf: local buffer for reading back registers via DMA
-+ * @reg_read_buf_phys: contains dma address for register read buffer
- * @reg_read_pos: marker for data read in reg_read_buf
- *
- * @regs: a contiguous chunk of memory for DMA register
-@@ -242,7 +243,10 @@ struct nandc_regs {
- * @cmd1/vld: some fixed controller register values
- * @ecc_modes: supported ECC modes by the current controller,
- * initialized via DT match data
-- */
-+ * @bch_enabled: flag to tell whether BCH or RS ECC mode is used
-+ * @dma_bam_enabled: flag to tell whether nand controller is using
-+ * bam dma
-+*/
- struct qcom_nand_controller {
- struct nand_hw_control controller;
- struct list_head host_list;
-@@ -255,17 +259,28 @@ struct qcom_nand_controller {
- struct clk *core_clk;
- struct clk *aon_clk;
-
-- struct dma_chan *chan;
-- unsigned int cmd_crci;
-- unsigned int data_crci;
- struct list_head desc_list;
-+ union {
-+ struct {
-+ struct dma_chan *tx_chan;
-+ struct dma_chan *rx_chan;
-+ struct dma_chan *cmd_chan;
-+ };
-+ struct {
-+ struct dma_chan *chan;
-+ unsigned int cmd_crci;
-+ unsigned int data_crci;
-+ };
-+ };
-
- u8 *data_buffer;
-+ bool dma_bam_enabled;
- int buf_size;
- int buf_count;
- int buf_start;
-
- __le32 *reg_read_buf;
-+ dma_addr_t reg_read_buf_phys;
- int reg_read_pos;
-
- struct nandc_regs *regs;
-@@ -324,6 +339,17 @@ struct qcom_nand_host {
- u32 clrreadstatus;
- };
-
-+/*
-+ * This data type corresponds to the nand driver data which will be used at
-+ * driver probe time
-+ * @ecc_modes - ecc mode for nand
-+ * @dma_bam_enabled - whether this driver is using bam
-+ */
-+struct qcom_nand_driver_data {
-+ u32 ecc_modes;
-+ bool dma_bam_enabled;
-+};
-+
- static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
- {
- return container_of(chip, struct qcom_nand_host, chip);
-@@ -1949,16 +1975,46 @@ static int qcom_nandc_alloc(struct qcom_
- if (!nandc->regs)
- return -ENOMEM;
-
-- nandc->reg_read_buf = devm_kzalloc(nandc->dev,
-- MAX_REG_RD * sizeof(*nandc->reg_read_buf),
-- GFP_KERNEL);
-- if (!nandc->reg_read_buf)
-- return -ENOMEM;
-+ if (!nandc->dma_bam_enabled) {
-+ nandc->reg_read_buf = devm_kzalloc(nandc->dev,
-+ MAX_REG_RD *
-+ sizeof(*nandc->reg_read_buf),
-+ GFP_KERNEL);
-
-- nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
-- if (!nandc->chan) {
-- dev_err(nandc->dev, "failed to request slave channel\n");
-- return -ENODEV;
-+ if (!nandc->reg_read_buf)
-+ return -ENOMEM;
-+
-+ nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
-+ if (!nandc->chan) {
-+ dev_err(nandc->dev, "failed to request slave channel\n");
-+ return -ENODEV;
-+ }
-+ } else {
-+ nandc->reg_read_buf = dmam_alloc_coherent(nandc->dev,
-+ MAX_REG_RD *
-+ sizeof(*nandc->reg_read_buf),
-+ &nandc->reg_read_buf_phys, GFP_KERNEL);
-+
-+ if (!nandc->reg_read_buf)
-+ return -ENOMEM;
-+
-+ nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx");
-+ if (!nandc->tx_chan) {
-+ dev_err(nandc->dev, "failed to request tx channel\n");
-+ return -ENODEV;
-+ }
-+
-+ nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx");
-+ if (!nandc->rx_chan) {
-+ dev_err(nandc->dev, "failed to request rx channel\n");
-+ return -ENODEV;
-+ }
-+
-+ nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd");
-+ if (!nandc->cmd_chan) {
-+ dev_err(nandc->dev, "failed to request cmd channel\n");
-+ return -ENODEV;
-+ }
- }
-
- INIT_LIST_HEAD(&nandc->desc_list);
-@@ -1971,8 +2027,35 @@ static int qcom_nandc_alloc(struct qcom_
-
- static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
- {
-- dma_release_channel(nandc->chan);
--}
-+ if (nandc->dma_bam_enabled) {
-+ if (nandc->tx_chan)
-+ dma_release_channel(nandc->tx_chan);
-+
-+ if (nandc->rx_chan)
-+ dma_release_channel(nandc->rx_chan);
-+
-+ if (nandc->cmd_chan)
-+ dma_release_channel(nandc->tx_chan);
-+
-+ if (nandc->reg_read_buf)
-+ dmam_free_coherent(nandc->dev, MAX_REG_RD *
-+ sizeof(*nandc->reg_read_buf),
-+ nandc->reg_read_buf,
-+ nandc->reg_read_buf_phys);
-+ } else {
-+ if (nandc->chan)
-+ dma_release_channel(nandc->chan);
-+
-+ if (nandc->reg_read_buf)
-+ devm_kfree(nandc->dev, nandc->reg_read_buf);
-+ }
-+
-+ if (nandc->regs)
-+ devm_kfree(nandc->dev, nandc->regs);
-+
-+ if (nandc->data_buffer)
-+ devm_kfree(nandc->dev, nandc->data_buffer);
-+ }
-
- /* one time setup of a few nand controller registers */
- static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
-@@ -2010,6 +2093,8 @@ static int qcom_nand_host_init(struct qc
- mtd->name = devm_kasprintf(dev, GFP_KERNEL, "qcom_nand.%d", host->cs);
- mtd->owner = THIS_MODULE;
- mtd->dev.parent = dev;
-+ mtd->priv = chip;
-+ chip->priv = nandc;
-
- chip->cmdfunc = qcom_nandc_command;
- chip->select_chip = qcom_nandc_select_chip;
-@@ -2057,16 +2142,20 @@ static int qcom_nandc_parse_dt(struct pl
- struct device_node *np = nandc->dev->of_node;
- int ret;
-
-- ret = of_property_read_u32(np, "qcom,cmd-crci", &nandc->cmd_crci);
-- if (ret) {
-- dev_err(nandc->dev, "command CRCI unspecified\n");
-- return ret;
-- }
-+ if (!nandc->dma_bam_enabled) {
-+ ret = of_property_read_u32(np, "qcom,cmd-crci",
-+ &nandc->cmd_crci);
-+ if (ret) {
-+ dev_err(nandc->dev, "command CRCI unspecified\n");
-+ return ret;
-+ }
-
-- ret = of_property_read_u32(np, "qcom,data-crci", &nandc->data_crci);
-- if (ret) {
-- dev_err(nandc->dev, "data CRCI unspecified\n");
-- return ret;
-+ ret = of_property_read_u32(np, "qcom,data-crci",
-+ &nandc->data_crci);
-+ if (ret) {
-+ dev_err(nandc->dev, "data CRCI unspecified\n");
-+ return ret;
-+ }
- }
-
- return 0;
-@@ -2081,6 +2170,7 @@ static int qcom_nandc_probe(struct platf
- struct device_node *dn = dev->of_node, *child;
- struct resource *res;
- int ret;
-+ struct qcom_nand_driver_data *driver_data;
-
- nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc), GFP_KERNEL);
- if (!nandc)
-@@ -2095,7 +2185,10 @@ static int qcom_nandc_probe(struct platf
- return -ENODEV;
- }
-
-- nandc->ecc_modes = (unsigned long)dev_data;
-+ driver_data = (struct qcom_nand_driver_data *)dev_data;
-+
-+ nandc->ecc_modes = driver_data->ecc_modes;
-+ nandc->dma_bam_enabled = driver_data->dma_bam_enabled;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- nandc->base = devm_ioremap_resource(dev, res);
-@@ -2187,7 +2280,15 @@ static int qcom_nandc_remove(struct plat
- return 0;
- }
-
--#define EBI2_NANDC_ECC_MODES (ECC_RS_4BIT | ECC_BCH_8BIT)
-+struct qcom_nand_driver_data ebi2_nandc_bam_data = {
-+ .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
-+ .dma_bam_enabled = true,
-+};
-+
-+struct qcom_nand_driver_data ebi2_nandc_data = {
-+ .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
-+ .dma_bam_enabled = false,
-+};
-
- /*
- * data will hold a struct pointer containing more differences once we support
-@@ -2195,7 +2296,10 @@ static int qcom_nandc_remove(struct plat
- */
- static const struct of_device_id qcom_nandc_of_match[] = {
- { .compatible = "qcom,ipq806x-nand",
-- .data = (void *)EBI2_NANDC_ECC_MODES,
-+ .data = (void *) &ebi2_nandc_data,
-+ },
-+ { .compatible = "qcom,ebi2-nandc-bam",
-+ .data = (void *) &ebi2_nandc_bam_data,
- },
- {}
- };
diff --git a/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch b/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch
deleted file mode 100644
index 4b9f672205..0000000000
--- a/target/linux/ipq806x/patches-4.9/861-qcom-mtd-nand-Added-bam-transaction-and-support-addi.patch
+++ /dev/null
@@ -1,1267 +0,0 @@
-From 645c7805f2602569263d7ac78050b2c9e91e3377 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Thu, 20 Apr 2017 10:23:00 +0530
-Subject: [PATCH] qcom: mtd: nand: Added bam transaction and support
- additional CSRs
-
-This patch adds the following for NAND BAM DMA support
- - Bam transaction which will be used for any NAND request.
- It contains the array of command elements, command and
- data sgl. This transaction will be resetted before every
- request.
- - Allocation function for NAND BAM transaction which will be
- called only once at probe time.
- - Reset function for NAND BAM transaction which will be called
- before any new NAND request.
- - Add support for additional CSRs.
- NAND_READ_LOCATION - page offset for reading in BAM DMA mode
- NAND_ERASED_CW_DETECT_CFG - status for erased code words
- NAND_BUFFER_STATUS - status for ECC
-
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- drivers/mtd/nand/qcom_nandc.c | 631 +++++++++++++++++++++++++++++++++++----
- include/linux/dma/qcom_bam_dma.h | 149 +++++++++
- 2 files changed, 721 insertions(+), 59 deletions(-)
- create mode 100644 include/linux/dma/qcom_bam_dma.h
-
---- a/drivers/mtd/nand/qcom_nandc.c
-+++ b/drivers/mtd/nand/qcom_nandc.c
-@@ -22,6 +22,7 @@
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/delay.h>
-+#include <linux/dma/qcom_bam_dma.h>
-
- /* NANDc reg offsets */
- #define NAND_FLASH_CMD 0x00
-@@ -53,6 +54,8 @@
- #define NAND_VERSION 0xf08
- #define NAND_READ_LOCATION_0 0xf20
- #define NAND_READ_LOCATION_1 0xf24
-+#define NAND_READ_LOCATION_2 0xf28
-+#define NAND_READ_LOCATION_3 0xf2c
-
- /* dummy register offsets, used by write_reg_dma */
- #define NAND_DEV_CMD1_RESTORE 0xdead
-@@ -135,6 +138,11 @@
- #define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
- #define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
-
-+/* NAND_READ_LOCATION_n bits */
-+#define READ_LOCATION_OFFSET 0
-+#define READ_LOCATION_SIZE 16
-+#define READ_LOCATION_LAST 31
-+
- /* Version Mask */
- #define NAND_VERSION_MAJOR_MASK 0xf0000000
- #define NAND_VERSION_MAJOR_SHIFT 28
-@@ -156,6 +164,9 @@
- #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \
- ERASE_START_VLD | SEQ_READ_START_VLD)
-
-+/* NAND_CTRL bits */
-+#define BAM_MODE_EN BIT(0)
-+
- /*
- * the NAND controller performs reads/writes with ECC in 516 byte chunks.
- * the driver calls the chunks 'step' or 'codeword' interchangeably
-@@ -177,12 +188,77 @@
- #define ECC_BCH_4BIT BIT(2)
- #define ECC_BCH_8BIT BIT(3)
-
-+/* Flags used for BAM DMA desc preparation*/
-+/* Don't set the EOT in current tx sgl */
-+#define DMA_DESC_FLAG_NO_EOT (0x0001)
-+/* Set the NWD flag in current sgl */
-+#define DMA_DESC_FLAG_BAM_NWD (0x0002)
-+/* Close current sgl and start writing in another sgl */
-+#define DMA_DESC_FLAG_BAM_NEXT_SGL (0x0004)
-+/*
-+ * Erased codeword status is being used two times in single transfer so this
-+ * flag will determine the current value of erased codeword status register
-+ */
-+#define DMA_DESC_ERASED_CW_SET (0x0008)
-+
-+/* Returns the dma address for reg read buffer */
-+#define REG_BUF_DMA_ADDR(chip, vaddr) \
-+ ((chip)->reg_read_buf_phys + \
-+ ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf))
-+
-+/* Returns the nand register physical address */
-+#define NAND_REG_PHYS_ADDRESS(chip, addr) \
-+ ((chip)->base_dma + (addr))
-+
-+/* command element array size in bam transaction */
-+#define BAM_CMD_ELEMENT_SIZE (256)
-+/* command sgl size in bam transaction */
-+#define BAM_CMD_SGL_SIZE (256)
-+/* data sgl size in bam transaction */
-+#define BAM_DATA_SGL_SIZE (128)
-+
-+/*
-+ * This data type corresponds to the BAM transaction which will be used for any
-+ * nand request.
-+ * @bam_ce - the array of bam command elements
-+ * @cmd_sgl - sgl for nand bam command pipe
-+ * @tx_sgl - sgl for nand bam consumer pipe
-+ * @rx_sgl - sgl for nand bam producer pipe
-+ * @bam_ce_index - the index in bam_ce which is available for next sgl request
-+ * @pre_bam_ce_index - the index in bam_ce which marks the start position ce
-+ * for current sgl. It will be used for size calculation
-+ * for current sgl
-+ * @cmd_sgl_cnt - no of entries in command sgl.
-+ * @tx_sgl_cnt - no of entries in tx sgl.
-+ * @rx_sgl_cnt - no of entries in rx sgl.
-+ */
-+struct bam_transaction {
-+ struct bam_cmd_element bam_ce[BAM_CMD_ELEMENT_SIZE];
-+ struct qcom_bam_sgl cmd_sgl[BAM_CMD_SGL_SIZE];
-+ struct qcom_bam_sgl tx_sgl[BAM_DATA_SGL_SIZE];
-+ struct qcom_bam_sgl rx_sgl[BAM_DATA_SGL_SIZE];
-+ uint32_t bam_ce_index;
-+ uint32_t pre_bam_ce_index;
-+ uint32_t cmd_sgl_cnt;
-+ uint32_t tx_sgl_cnt;
-+ uint32_t rx_sgl_cnt;
-+};
-+
-+/**
-+ * This data type corresponds to the nand dma descriptor
-+ * @list - list for desc_info
-+ * @dir - DMA transfer direction
-+ * @sgl - sgl which will be used for single sgl dma descriptor
-+ * @dma_desc - low level dma engine descriptor
-+ * @bam_desc_data - used for bam desc mappings
-+ */
- struct desc_info {
- struct list_head node;
-
- enum dma_data_direction dir;
- struct scatterlist sgl;
- struct dma_async_tx_descriptor *dma_desc;
-+ struct qcom_bam_custom_data bam_desc_data;
- };
-
- /*
-@@ -210,6 +286,13 @@ struct nandc_regs {
- __le32 orig_vld;
-
- __le32 ecc_buf_cfg;
-+ __le32 read_location0;
-+ __le32 read_location1;
-+ __le32 read_location2;
-+ __le32 read_location3;
-+
-+ __le32 erased_cw_detect_cfg_clr;
-+ __le32 erased_cw_detect_cfg_set;
- };
-
- /*
-@@ -225,6 +308,7 @@ struct nandc_regs {
- * @aon_clk: another controller clock
- *
- * @chan: dma channel
-+ * @bam_txn: contains the bam transaction address
- * @cmd_crci: ADM DMA CRCI for command flow control
- * @data_crci: ADM DMA CRCI for data flow control
- * @desc_list: DMA descriptor list (list of desc_infos)
-@@ -250,6 +334,7 @@ struct nandc_regs {
- struct qcom_nand_controller {
- struct nand_hw_control controller;
- struct list_head host_list;
-+ struct bam_transaction *bam_txn;
-
- struct device *dev;
-
-@@ -350,6 +435,45 @@ struct qcom_nand_driver_data {
- bool dma_bam_enabled;
- };
-
-+/* Allocates and Initializes the BAM transaction */
-+struct bam_transaction *alloc_bam_transaction(
-+ struct qcom_nand_controller *nandc)
-+{
-+ struct bam_transaction *bam_txn;
-+
-+ bam_txn = kzalloc(sizeof(*bam_txn), GFP_KERNEL);
-+
-+ if (!bam_txn)
-+ return NULL;
-+
-+ bam_txn->bam_ce_index = 0;
-+ bam_txn->pre_bam_ce_index = 0;
-+ bam_txn->cmd_sgl_cnt = 0;
-+ bam_txn->tx_sgl_cnt = 0;
-+ bam_txn->rx_sgl_cnt = 0;
-+
-+ qcom_bam_sg_init_table(bam_txn->cmd_sgl, BAM_CMD_SGL_SIZE);
-+ qcom_bam_sg_init_table(bam_txn->tx_sgl, BAM_DATA_SGL_SIZE);
-+ qcom_bam_sg_init_table(bam_txn->rx_sgl, BAM_DATA_SGL_SIZE);
-+
-+ return bam_txn;
-+}
-+
-+/* Clears the BAM transaction index */
-+void clear_bam_transaction(struct qcom_nand_controller *nandc)
-+{
-+ struct bam_transaction *bam_txn = nandc->bam_txn;
-+
-+ if (!nandc->dma_bam_enabled)
-+ return;
-+
-+ bam_txn->bam_ce_index = 0;
-+ bam_txn->pre_bam_ce_index = 0;
-+ bam_txn->cmd_sgl_cnt = 0;
-+ bam_txn->tx_sgl_cnt = 0;
-+ bam_txn->rx_sgl_cnt = 0;
-+}
-+
- static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
- {
- return container_of(chip, struct qcom_nand_host, chip);
-@@ -406,6 +530,16 @@ static __le32 *offset_to_nandc_reg(struc
- return &regs->orig_vld;
- case NAND_EBI2_ECC_BUF_CFG:
- return &regs->ecc_buf_cfg;
-+ case NAND_BUFFER_STATUS:
-+ return &regs->clrreadstatus;
-+ case NAND_READ_LOCATION_0:
-+ return &regs->read_location0;
-+ case NAND_READ_LOCATION_1:
-+ return &regs->read_location1;
-+ case NAND_READ_LOCATION_2:
-+ return &regs->read_location2;
-+ case NAND_READ_LOCATION_3:
-+ return &regs->read_location3;
- default:
- return NULL;
- }
-@@ -447,7 +581,7 @@ static void update_rw_regs(struct qcom_n
- {
- struct nand_chip *chip = &host->chip;
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
-- u32 cmd, cfg0, cfg1, ecc_bch_cfg;
-+ u32 cmd, cfg0, cfg1, ecc_bch_cfg, read_location0;
-
- if (read) {
- if (host->use_ecc)
-@@ -464,12 +598,20 @@ static void update_rw_regs(struct qcom_n
-
- cfg1 = host->cfg1;
- ecc_bch_cfg = host->ecc_bch_cfg;
-+ if (read)
-+ read_location0 = (0 << READ_LOCATION_OFFSET) |
-+ (host->cw_data << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST);
- } else {
- cfg0 = (host->cfg0_raw & ~(7U << CW_PER_PAGE)) |
- (num_cw - 1) << CW_PER_PAGE;
-
- cfg1 = host->cfg1_raw;
- ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
-+ if (read)
-+ read_location0 = (0 << READ_LOCATION_OFFSET) |
-+ (host->cw_size << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST);
- }
-
- nandc_set_reg(nandc, NAND_FLASH_CMD, cmd);
-@@ -480,8 +622,104 @@ static void update_rw_regs(struct qcom_n
- nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
- nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
- nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
-+
-+ if (read)
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0, read_location0);
-+}
-+
-+/*
-+ * Prepares the command descriptor for BAM DMA which will be used for NAND
-+ * register read and write. The command descriptor requires the command
-+ * to be formed in command element type so this function uses the command
-+ * element from bam transaction ce array and fills the same with required
-+ * data. A single SGL can contain multiple command elements so
-+ * DMA_DESC_FLAG_BAM_NEXT_SGL will be used for starting the separate SGL
-+ * after the current command element.
-+ */
-+static int prep_dma_desc_command(struct qcom_nand_controller *nandc, bool read,
-+ int reg_off, const void *vaddr,
-+ int size, unsigned int flags)
-+{
-+ int bam_ce_size;
-+ int i;
-+ struct bam_cmd_element *bam_ce_buffer;
-+ struct bam_transaction *bam_txn = nandc->bam_txn;
-+
-+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_index];
-+
-+ /* fill the command desc */
-+ for (i = 0; i < size; i++) {
-+ if (read) {
-+ qcom_prep_bam_ce(&bam_ce_buffer[i],
-+ NAND_REG_PHYS_ADDRESS(nandc, reg_off + 4 * i),
-+ BAM_READ_COMMAND,
-+ REG_BUF_DMA_ADDR(nandc,
-+ (unsigned int *)vaddr + i));
-+ } else {
-+ qcom_prep_bam_ce(&bam_ce_buffer[i],
-+ NAND_REG_PHYS_ADDRESS(nandc, reg_off + 4 * i),
-+ BAM_WRITE_COMMAND,
-+ *((unsigned int *)vaddr + i));
-+ }
-+ }
-+
-+ /* use the separate sgl after this command */
-+ if (flags & DMA_DESC_FLAG_BAM_NEXT_SGL) {
-+ bam_ce_buffer = &bam_txn->bam_ce[bam_txn->pre_bam_ce_index];
-+ bam_txn->bam_ce_index += size;
-+ bam_ce_size = (bam_txn->bam_ce_index -
-+ bam_txn->pre_bam_ce_index) *
-+ sizeof(struct bam_cmd_element);
-+ sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].sgl,
-+ bam_ce_buffer,
-+ bam_ce_size);
-+ if (flags & DMA_DESC_FLAG_BAM_NWD)
-+ bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].dma_flags =
-+ DESC_FLAG_NWD | DESC_FLAG_CMD;
-+ else
-+ bam_txn->cmd_sgl[bam_txn->cmd_sgl_cnt].dma_flags =
-+ DESC_FLAG_CMD;
-+
-+ bam_txn->cmd_sgl_cnt++;
-+ bam_txn->pre_bam_ce_index = bam_txn->bam_ce_index;
-+ } else {
-+ bam_txn->bam_ce_index += size;
-+ }
-+
-+ return 0;
- }
-
-+/*
-+ * Prepares the data descriptor for BAM DMA which will be used for NAND
-+ * data read and write.
-+ */
-+static int prep_dma_desc_data_bam(struct qcom_nand_controller *nandc, bool read,
-+ int reg_off, const void *vaddr,
-+ int size, unsigned int flags)
-+{
-+ struct bam_transaction *bam_txn = nandc->bam_txn;
-+
-+ if (read) {
-+ sg_set_buf(&bam_txn->rx_sgl[bam_txn->rx_sgl_cnt].sgl,
-+ vaddr, size);
-+ bam_txn->rx_sgl[bam_txn->rx_sgl_cnt].dma_flags = 0;
-+ bam_txn->rx_sgl_cnt++;
-+ } else {
-+ sg_set_buf(&bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].sgl,
-+ vaddr, size);
-+ if (flags & DMA_DESC_FLAG_NO_EOT)
-+ bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].dma_flags = 0;
-+ else
-+ bam_txn->tx_sgl[bam_txn->tx_sgl_cnt].dma_flags =
-+ DESC_FLAG_EOT;
-+
-+ bam_txn->tx_sgl_cnt++;
-+ }
-+
-+ return 0;
-+}
-+
-+/* Prepares the dma desciptor for adm dma engine */
- static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read,
- int reg_off, const void *vaddr, int size,
- bool flow_control)
-@@ -560,7 +798,7 @@ err:
- * @num_regs: number of registers to read
- */
- static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
-- int num_regs)
-+ int num_regs, unsigned int flags)
- {
- bool flow_control = false;
- void *vaddr;
-@@ -569,10 +807,18 @@ static int read_reg_dma(struct qcom_nand
- if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
- flow_control = true;
-
-- size = num_regs * sizeof(u32);
- vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
- nandc->reg_read_pos += num_regs;
-
-+ if (nandc->dma_bam_enabled) {
-+ size = num_regs;
-+
-+ return prep_dma_desc_command(nandc, true, first, vaddr, size,
-+ flags);
-+ }
-+
-+ size = num_regs * sizeof(u32);
-+
- return prep_dma_desc(nandc, true, first, vaddr, size, flow_control);
- }
-
-@@ -584,7 +830,7 @@ static int read_reg_dma(struct qcom_nand
- * @num_regs: number of registers to write
- */
- static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
-- int num_regs)
-+ int num_regs, unsigned int flags)
- {
- bool flow_control = false;
- struct nandc_regs *regs = nandc->regs;
-@@ -596,12 +842,29 @@ static int write_reg_dma(struct qcom_nan
- if (first == NAND_FLASH_CMD)
- flow_control = true;
-
-+ if (first == NAND_ERASED_CW_DETECT_CFG) {
-+ if (flags & DMA_DESC_ERASED_CW_SET)
-+ vaddr = &regs->erased_cw_detect_cfg_set;
-+ else
-+ vaddr = &regs->erased_cw_detect_cfg_clr;
-+ }
-+
-+ if (first == NAND_EXEC_CMD)
-+ flags |= DMA_DESC_FLAG_BAM_NWD;
-+
- if (first == NAND_DEV_CMD1_RESTORE)
- first = NAND_DEV_CMD1;
-
- if (first == NAND_DEV_CMD_VLD_RESTORE)
- first = NAND_DEV_CMD_VLD;
-
-+ if (nandc->dma_bam_enabled) {
-+ size = num_regs;
-+
-+ return prep_dma_desc_command(nandc, false, first, vaddr, size,
-+ flags);
-+ }
-+
- size = num_regs * sizeof(u32);
-
- return prep_dma_desc(nandc, false, first, vaddr, size, flow_control);
-@@ -616,8 +879,12 @@ static int write_reg_dma(struct qcom_nan
- * @size: DMA transaction size in bytes
- */
- static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
-- const u8 *vaddr, int size)
-+ const u8 *vaddr, int size, unsigned int flags)
- {
-+ if (nandc->dma_bam_enabled)
-+ return prep_dma_desc_data_bam(nandc, true, reg_off, vaddr, size,
-+ flags);
-+
- return prep_dma_desc(nandc, true, reg_off, vaddr, size, false);
- }
-
-@@ -630,8 +897,12 @@ static int read_data_dma(struct qcom_nan
- * @size: DMA transaction size in bytes
- */
- static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
-- const u8 *vaddr, int size)
-+ const u8 *vaddr, int size, unsigned int flags)
- {
-+ if (nandc->dma_bam_enabled)
-+ return prep_dma_desc_data_bam(nandc, false, reg_off, vaddr,
-+ size, flags);
-+
- return prep_dma_desc(nandc, false, reg_off, vaddr, size, false);
- }
-
-@@ -641,14 +912,57 @@ static int write_data_dma(struct qcom_na
- */
- static void config_cw_read(struct qcom_nand_controller *nandc)
- {
-- write_reg_dma(nandc, NAND_FLASH_CMD, 3);
-- write_reg_dma(nandc, NAND_DEV0_CFG0, 3);
-- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1);
-
-- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0);
-+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
-+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
-+
-+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
-+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
-+ DMA_DESC_ERASED_CW_SET);
-+ if (nandc->dma_bam_enabled)
-+ write_reg_dma(nandc, NAND_READ_LOCATION_0, 1,
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
-
-- read_reg_dma(nandc, NAND_FLASH_STATUS, 2);
-- read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1);
-+
-+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NWD |
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
-+
-+ read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
-+ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
-+}
-+
-+/*
-+ * Helpers to prepare DMA descriptors for configuring registers
-+ * before reading a NAND page with BAM.
-+ */
-+static void config_bam_page_read(struct qcom_nand_controller *nandc)
-+{
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0);
-+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
-+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
-+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
-+ write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
-+ DMA_DESC_ERASED_CW_SET |
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
-+}
-+
-+/*
-+ * Helpers to prepare DMA descriptors for configuring registers
-+ * before reading each codeword in NAND page with BAM.
-+ */
-+static void config_bam_cw_read(struct qcom_nand_controller *nandc)
-+{
-+ if (nandc->dma_bam_enabled)
-+ write_reg_dma(nandc, NAND_READ_LOCATION_0, 4, 0);
-+
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+
-+ read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
-+ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
- }
-
- /*
-@@ -657,19 +971,20 @@ static void config_cw_read(struct qcom_n
- */
- static void config_cw_write_pre(struct qcom_nand_controller *nandc)
- {
-- write_reg_dma(nandc, NAND_FLASH_CMD, 3);
-- write_reg_dma(nandc, NAND_DEV0_CFG0, 3);
-- write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1);
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, 0);
-+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
-+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
- }
-
- static void config_cw_write_post(struct qcom_nand_controller *nandc)
- {
-- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
-+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
-- read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
-+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
-- write_reg_dma(nandc, NAND_FLASH_STATUS, 1);
-- write_reg_dma(nandc, NAND_READ_STATUS, 1);
-+ write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
-+ write_reg_dma(nandc, NAND_READ_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
- }
-
- /*
-@@ -683,6 +998,8 @@ static int nandc_param(struct qcom_nand_
- struct nand_chip *chip = &host->chip;
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
-
-+ clear_bam_transaction(nandc);
-+
- /*
- * NAND_CMD_PARAM is called before we know much about the FLASH chip
- * in use. we configure the controller to perform a raw read of 512
-@@ -715,9 +1032,13 @@ static int nandc_param(struct qcom_nand_
-
- nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
- nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
-+ (0 << READ_LOCATION_OFFSET) |
-+ (512 << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST));
-
-- write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1);
-- write_reg_dma(nandc, NAND_DEV_CMD1, 1);
-+ write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
-+ write_reg_dma(nandc, NAND_DEV_CMD1, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
- nandc->buf_count = 512;
- memset(nandc->data_buffer, 0xff, nandc->buf_count);
-@@ -725,11 +1046,12 @@ static int nandc_param(struct qcom_nand_
- config_cw_read(nandc);
-
- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
-- nandc->buf_count);
-+ nandc->buf_count, 0);
-
- /* restore CMD1 and VLD regs */
-- write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1);
-- write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1);
-+ write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0);
-+ write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1,
-+ DMA_DESC_FLAG_BAM_NEXT_SGL);
-
- return 0;
- }
-@@ -740,6 +1062,8 @@ static int erase_block(struct qcom_nand_
- struct nand_chip *chip = &host->chip;
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
-
-+ clear_bam_transaction(nandc);
-+
- nandc_set_reg(nandc, NAND_FLASH_CMD,
- BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
- nandc_set_reg(nandc, NAND_ADDR0, page_addr);
-@@ -751,14 +1075,15 @@ static int erase_block(struct qcom_nand_
- nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
- nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
-
-- write_reg_dma(nandc, NAND_FLASH_CMD, 3);
-- write_reg_dma(nandc, NAND_DEV0_CFG0, 2);
-- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
-
-- read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 3, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+ write_reg_dma(nandc, NAND_DEV0_CFG0, 2, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+
-+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
-- write_reg_dma(nandc, NAND_FLASH_STATUS, 1);
-- write_reg_dma(nandc, NAND_READ_STATUS, 1);
-+ write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0);
-+ write_reg_dma(nandc, NAND_READ_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
- return 0;
- }
-@@ -772,16 +1097,19 @@ static int read_id(struct qcom_nand_host
- if (column == -1)
- return 0;
-
-+ clear_bam_transaction(nandc);
-+
- nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID);
- nandc_set_reg(nandc, NAND_ADDR0, column);
- nandc_set_reg(nandc, NAND_ADDR1, 0);
-- nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
-+ nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT,
-+ nandc->dma_bam_enabled ? 0 : DM_EN);
- nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
-
-- write_reg_dma(nandc, NAND_FLASH_CMD, 4);
-- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 4, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
-- read_reg_dma(nandc, NAND_READ_ID, 1);
-+ read_reg_dma(nandc, NAND_READ_ID, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
- return 0;
- }
-@@ -792,28 +1120,108 @@ static int reset(struct qcom_nand_host *
- struct nand_chip *chip = &host->chip;
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
-
-+ clear_bam_transaction(nandc);
-+
- nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE);
- nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
-
-- write_reg_dma(nandc, NAND_FLASH_CMD, 1);
-- write_reg_dma(nandc, NAND_EXEC_CMD, 1);
-+ write_reg_dma(nandc, NAND_FLASH_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-+ write_reg_dma(nandc, NAND_EXEC_CMD, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
-- read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
-+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1, DMA_DESC_FLAG_BAM_NEXT_SGL);
-
- return 0;
- }
-
-+static int prepare_bam_async_desc(struct qcom_nand_controller *nandc,
-+ struct dma_chan *chan,
-+ struct qcom_bam_sgl *bam_sgl,
-+ int sgl_cnt,
-+ enum dma_transfer_direction direction)
-+{
-+ struct desc_info *desc;
-+ struct dma_async_tx_descriptor *dma_desc;
-+
-+ if (!qcom_bam_map_sg(nandc->dev, bam_sgl, sgl_cnt, direction)) {
-+ dev_err(nandc->dev, "failure in mapping sgl\n");
-+ return -ENOMEM;
-+ }
-+
-+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
-+ if (!desc) {
-+ qcom_bam_unmap_sg(nandc->dev, bam_sgl, sgl_cnt, direction);
-+ return -ENOMEM;
-+ }
-+
-+
-+ desc->bam_desc_data.dir = direction;
-+ desc->bam_desc_data.sgl_cnt = sgl_cnt;
-+ desc->bam_desc_data.bam_sgl = bam_sgl;
-+
-+ dma_desc = dmaengine_prep_dma_custom_mapping(chan,
-+ &desc->bam_desc_data,
-+ 0);
-+
-+ if (!dma_desc) {
-+ dev_err(nandc->dev, "failure in cmd prep desc\n");
-+ qcom_bam_unmap_sg(nandc->dev, bam_sgl, sgl_cnt, direction);
-+ kfree(desc);
-+ return -EINVAL;
-+ }
-+
-+ desc->dma_desc = dma_desc;
-+
-+ list_add_tail(&desc->node, &nandc->desc_list);
-+
-+ return 0;
-+
-+}
-+
- /* helpers to submit/free our list of dma descriptors */
- static int submit_descs(struct qcom_nand_controller *nandc)
- {
- struct desc_info *desc;
- dma_cookie_t cookie = 0;
-+ struct bam_transaction *bam_txn = nandc->bam_txn;
-+ int r;
-+
-+ if (nandc->dma_bam_enabled) {
-+ if (bam_txn->rx_sgl_cnt) {
-+ r = prepare_bam_async_desc(nandc, nandc->rx_chan,
-+ bam_txn->rx_sgl, bam_txn->rx_sgl_cnt,
-+ DMA_DEV_TO_MEM);
-+ if (r)
-+ return r;
-+ }
-+
-+ if (bam_txn->tx_sgl_cnt) {
-+ r = prepare_bam_async_desc(nandc, nandc->tx_chan,
-+ bam_txn->tx_sgl, bam_txn->tx_sgl_cnt,
-+ DMA_MEM_TO_DEV);
-+ if (r)
-+ return r;
-+ }
-+
-+ r = prepare_bam_async_desc(nandc, nandc->cmd_chan,
-+ bam_txn->cmd_sgl, bam_txn->cmd_sgl_cnt,
-+ DMA_MEM_TO_DEV);
-+ if (r)
-+ return r;
-+ }
-
- list_for_each_entry(desc, &nandc->desc_list, node)
- cookie = dmaengine_submit(desc->dma_desc);
-
-- if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
-- return -ETIMEDOUT;
-+ if (nandc->dma_bam_enabled) {
-+ dma_async_issue_pending(nandc->tx_chan);
-+ dma_async_issue_pending(nandc->rx_chan);
-+
-+ if (dma_sync_wait(nandc->cmd_chan, cookie) != DMA_COMPLETE)
-+ return -ETIMEDOUT;
-+ } else {
-+ if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
-+ return -ETIMEDOUT;
-+ }
-
- return 0;
- }
-@@ -824,7 +1232,16 @@ static void free_descs(struct qcom_nand_
-
- list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
- list_del(&desc->node);
-- dma_unmap_sg(nandc->dev, &desc->sgl, 1, desc->dir);
-+
-+ if (nandc->dma_bam_enabled)
-+ qcom_bam_unmap_sg(nandc->dev,
-+ desc->bam_desc_data.bam_sgl,
-+ desc->bam_desc_data.sgl_cnt,
-+ desc->bam_desc_data.dir);
-+ else
-+ dma_unmap_sg(nandc->dev, &desc->sgl, 1,
-+ desc->dir);
-+
- kfree(desc);
- }
- }
-@@ -1135,6 +1552,9 @@ static int read_page_ecc(struct qcom_nan
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- int i, ret;
-
-+ if (nandc->dma_bam_enabled)
-+ config_bam_page_read(nandc);
-+
- /* queue cmd descs for each codeword */
- for (i = 0; i < ecc->steps; i++) {
- int data_size, oob_size;
-@@ -1148,11 +1568,36 @@ static int read_page_ecc(struct qcom_nan
- oob_size = host->ecc_bytes_hw + host->spare_bytes;
- }
-
-- config_cw_read(nandc);
-+ if (nandc->dma_bam_enabled) {
-+ if (data_buf && oob_buf) {
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
-+ (0 << READ_LOCATION_OFFSET) |
-+ (data_size << READ_LOCATION_SIZE) |
-+ (0 << READ_LOCATION_LAST));
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_1,
-+ (data_size << READ_LOCATION_OFFSET) |
-+ (oob_size << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST));
-+ } else if (data_buf) {
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
-+ (0 << READ_LOCATION_OFFSET) |
-+ (data_size << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST));
-+ } else {
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
-+ (data_size << READ_LOCATION_OFFSET) |
-+ (oob_size << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST));
-+ }
-+
-+ config_bam_cw_read(nandc);
-+ } else {
-+ config_cw_read(nandc);
-+ }
-
- if (data_buf)
- read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
-- data_size);
-+ data_size, 0);
-
- /*
- * when ecc is enabled, the controller doesn't read the real
-@@ -1168,7 +1613,7 @@ static int read_page_ecc(struct qcom_nan
- *oob_buf++ = 0xff;
-
- read_data_dma(nandc, FLASH_BUF_ACC + data_size,
-- oob_buf, oob_size);
-+ oob_buf, oob_size, 0);
- }
-
- if (data_buf)
-@@ -1207,10 +1652,14 @@ static int copy_last_cw(struct qcom_nand
-
- set_address(host, host->cw_size * (ecc->steps - 1), page);
- update_rw_regs(host, 1, true);
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
-+ (0 << READ_LOCATION_OFFSET) |
-+ (size << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST));
-
- config_cw_read(nandc);
-
-- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size);
-+ read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
-
- ret = submit_descs(nandc);
- if (ret)
-@@ -1233,6 +1682,7 @@ static int qcom_nandc_read_page(struct m
- data_buf = buf;
- oob_buf = oob_required ? chip->oob_poi : NULL;
-
-+ clear_bam_transaction(nandc);
- ret = read_page_ecc(host, data_buf, oob_buf);
- if (ret) {
- dev_err(nandc->dev, "failure to read page\n");
-@@ -1252,13 +1702,19 @@ static int qcom_nandc_read_page_raw(stru
- u8 *data_buf, *oob_buf;
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- int i, ret;
-+ int read_location;
-
- data_buf = buf;
- oob_buf = chip->oob_poi;
-
- host->use_ecc = false;
-+
-+ clear_bam_transaction(nandc);
- update_rw_regs(host, ecc->steps, true);
-
-+ if (nandc->dma_bam_enabled)
-+ config_bam_page_read(nandc);
-+
- for (i = 0; i < ecc->steps; i++) {
- int data_size1, data_size2, oob_size1, oob_size2;
- int reg_off = FLASH_BUF_ACC;
-@@ -1276,21 +1732,49 @@ static int qcom_nandc_read_page_raw(stru
- oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
- }
-
-- config_cw_read(nandc);
-+ if (nandc->dma_bam_enabled) {
-+ read_location = 0;
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_0,
-+ (read_location << READ_LOCATION_OFFSET) |
-+ (data_size1 << READ_LOCATION_SIZE) |
-+ (0 << READ_LOCATION_LAST));
-+ read_location += data_size1;
-+
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_1,
-+ (read_location << READ_LOCATION_OFFSET) |
-+ (oob_size1 << READ_LOCATION_SIZE) |
-+ (0 << READ_LOCATION_LAST));
-+ read_location += oob_size1;
-+
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_2,
-+ (read_location << READ_LOCATION_OFFSET) |
-+ (data_size2 << READ_LOCATION_SIZE) |
-+ (0 << READ_LOCATION_LAST));
-+ read_location += data_size2;
-+
-+ nandc_set_reg(nandc, NAND_READ_LOCATION_3,
-+ (read_location << READ_LOCATION_OFFSET) |
-+ (oob_size2 << READ_LOCATION_SIZE) |
-+ (1 << READ_LOCATION_LAST));
-+
-+ config_bam_cw_read(nandc);
-+ } else {
-+ config_cw_read(nandc);
-+ }
-
-- read_data_dma(nandc, reg_off, data_buf, data_size1);
-+ read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
- reg_off += data_size1;
- data_buf += data_size1;
-
-- read_data_dma(nandc, reg_off, oob_buf, oob_size1);
-+ read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0);
- reg_off += oob_size1;
- oob_buf += oob_size1;
-
-- read_data_dma(nandc, reg_off, data_buf, data_size2);
-+ read_data_dma(nandc, reg_off, data_buf, data_size2, 0);
- reg_off += data_size2;
- data_buf += data_size2;
-
-- read_data_dma(nandc, reg_off, oob_buf, oob_size2);
-+ read_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
- oob_buf += oob_size2;
- }
-
-@@ -1313,6 +1797,7 @@ static int qcom_nandc_read_oob(struct mt
- int ret;
-
- clear_read_regs(nandc);
-+ clear_bam_transaction(nandc);
-
- host->use_ecc = true;
- set_address(host, 0, page);
-@@ -1336,6 +1821,7 @@ static int qcom_nandc_write_page(struct
- int i, ret;
-
- clear_read_regs(nandc);
-+ clear_bam_transaction(nandc);
-
- data_buf = (u8 *)buf;
- oob_buf = chip->oob_poi;
-@@ -1357,7 +1843,8 @@ static int qcom_nandc_write_page(struct
-
- config_cw_write_pre(nandc);
-
-- write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size);
-+ write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size,
-+ i == (ecc->steps - 1) ? DMA_DESC_FLAG_NO_EOT : 0);
-
- /*
- * when ECC is enabled, we don't really need to write anything
-@@ -1370,7 +1857,7 @@ static int qcom_nandc_write_page(struct
- oob_buf += host->bbm_size;
-
- write_data_dma(nandc, FLASH_BUF_ACC + data_size,
-- oob_buf, oob_size);
-+ oob_buf, oob_size, 0);
- }
-
- config_cw_write_post(nandc);
-@@ -1400,6 +1887,7 @@ static int qcom_nandc_write_page_raw(str
- int i, ret;
-
- clear_read_regs(nandc);
-+ clear_bam_transaction(nandc);
-
- data_buf = (u8 *)buf;
- oob_buf = chip->oob_poi;
-@@ -1426,19 +1914,22 @@ static int qcom_nandc_write_page_raw(str
-
- config_cw_write_pre(nandc);
-
-- write_data_dma(nandc, reg_off, data_buf, data_size1);
-+ write_data_dma(nandc, reg_off, data_buf, data_size1,
-+ DMA_DESC_FLAG_NO_EOT);
- reg_off += data_size1;
- data_buf += data_size1;
-
-- write_data_dma(nandc, reg_off, oob_buf, oob_size1);
-+ write_data_dma(nandc, reg_off, oob_buf, oob_size1,
-+ DMA_DESC_FLAG_NO_EOT);
- reg_off += oob_size1;
- oob_buf += oob_size1;
-
-- write_data_dma(nandc, reg_off, data_buf, data_size2);
-+ write_data_dma(nandc, reg_off, data_buf, data_size2,
-+ DMA_DESC_FLAG_NO_EOT);
- reg_off += data_size2;
- data_buf += data_size2;
-
-- write_data_dma(nandc, reg_off, oob_buf, oob_size2);
-+ write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0);
- oob_buf += oob_size2;
-
- config_cw_write_post(nandc);
-@@ -1474,6 +1965,7 @@ static int qcom_nandc_write_oob(struct m
-
- host->use_ecc = true;
-
-+ clear_bam_transaction(nandc);
- ret = copy_last_cw(host, page);
- if (ret)
- return ret;
-@@ -1493,7 +1985,7 @@ static int qcom_nandc_write_oob(struct m
-
- config_cw_write_pre(nandc);
- write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
-- data_size + oob_size);
-+ data_size + oob_size, 0);
- config_cw_write_post(nandc);
-
- ret = submit_descs(nandc);
-@@ -1531,6 +2023,7 @@ static int qcom_nandc_block_bad(struct m
- */
- host->use_ecc = false;
-
-+ clear_bam_transaction(nandc);
- ret = copy_last_cw(host, page);
- if (ret)
- goto err;
-@@ -1561,6 +2054,7 @@ static int qcom_nandc_block_markbad(stru
- int page, ret, status = 0;
-
- clear_read_regs(nandc);
-+ clear_bam_transaction(nandc);
-
- /*
- * to mark the BBM as bad, we flash the entire last codeword with 0s.
-@@ -1577,7 +2071,8 @@ static int qcom_nandc_block_markbad(stru
- update_rw_regs(host, 1, false);
-
- config_cw_write_pre(nandc);
-- write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, host->cw_size);
-+ write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
-+ host->cw_size, 0);
- config_cw_write_post(nandc);
-
- ret = submit_descs(nandc);
-@@ -1937,6 +2432,8 @@ static int qcom_nand_host_setup(struct q
-
- host->clrflashstatus = FS_READY_BSY_N;
- host->clrreadstatus = 0xc0;
-+ nandc->regs->erased_cw_detect_cfg_clr = CLR_ERASED_PAGE_DET;
-+ nandc->regs->erased_cw_detect_cfg_set = SET_ERASED_PAGE_DET;
-
- dev_dbg(nandc->dev,
- "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n",
-@@ -2015,6 +2512,12 @@ static int qcom_nandc_alloc(struct qcom_
- dev_err(nandc->dev, "failed to request cmd channel\n");
- return -ENODEV;
- }
-+
-+ nandc->bam_txn = alloc_bam_transaction(nandc);
-+ if (!nandc->bam_txn) {
-+ dev_err(nandc->dev, "failed to allocate bam transaction\n");
-+ return -ENOMEM;
-+ }
- }
-
- INIT_LIST_HEAD(&nandc->desc_list);
-@@ -2050,6 +2553,9 @@ static void qcom_nandc_unalloc(struct qc
- devm_kfree(nandc->dev, nandc->reg_read_buf);
- }
-
-+ if (nandc->bam_txn)
-+ devm_kfree(nandc->dev, nandc->bam_txn);
-+
- if (nandc->regs)
- devm_kfree(nandc->dev, nandc->regs);
-
-@@ -2060,12 +2566,19 @@ static void qcom_nandc_unalloc(struct qc
- /* one time setup of a few nand controller registers */
- static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
- {
-+ u32 nand_ctrl;
-+
- /* kill onenand */
- nandc_write(nandc, SFLASHC_BURST_CFG, 0);
- nandc_write(nandc, NAND_DEV_CMD_VLD, NAND_DEV_CMD_VLD_VAL);
-
-- /* enable ADM DMA */
-- nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
-+ /* enable ADM or BAM DMA */
-+ if (!nandc->dma_bam_enabled) {
-+ nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
-+ } else {
-+ nand_ctrl = nandc_read(nandc, NAND_CTRL);
-+ nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN);
-+ }
-
- /* save the original values of these registers */
- nandc->cmd1 = nandc_read(nandc, NAND_DEV_CMD1);
---- /dev/null
-+++ b/include/linux/dma/qcom_bam_dma.h
-@@ -0,0 +1,149 @@
-+/*
-+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
-+ *
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-+ */
-+
-+#ifndef _QCOM_BAM_DMA_H
-+#define _QCOM_BAM_DMA_H
-+
-+#include <linux/dma-mapping.h>
-+
-+#define DESC_FLAG_INT BIT(15)
-+#define DESC_FLAG_EOT BIT(14)
-+#define DESC_FLAG_EOB BIT(13)
-+#define DESC_FLAG_NWD BIT(12)
-+#define DESC_FLAG_CMD BIT(11)
-+
-+/*
-+ * QCOM BAM DMA SGL struct
-+ *
-+ * @sgl: DMA SGL
-+ * @dma_flags: BAM DMA flags
-+ */
-+struct qcom_bam_sgl {
-+ struct scatterlist sgl;
-+ unsigned int dma_flags;
-+};
-+
-+/*
-+ * This data type corresponds to the native Command Element
-+ * supported by BAM DMA Engine.
-+ *
-+ * @addr - register address.
-+ * @command - command type.
-+ * @data - for write command: content to be written into peripheral register.
-+ * for read command: dest addr to write peripheral register value to.
-+ * @mask - register mask.
-+ * @reserved - for future usage.
-+ *
-+ */
-+struct bam_cmd_element {
-+ __le32 addr:24;
-+ __le32 command:8;
-+ __le32 data;
-+ __le32 mask;
-+ __le32 reserved;
-+};
-+
-+/*
-+ * This enum indicates the command type in a command element
-+ */
-+enum bam_command_type {
-+ BAM_WRITE_COMMAND = 0,
-+ BAM_READ_COMMAND,
-+};
-+
-+/*
-+ * qcom_bam_sg_init_table - Init QCOM BAM SGL
-+ * @bam_sgl: bam sgl
-+ * @nents: number of entries in bam sgl
-+ *
-+ * This function performs the initialization for each SGL in BAM SGL
-+ * with generic SGL API.
-+ */
-+static inline void qcom_bam_sg_init_table(struct qcom_bam_sgl *bam_sgl,
-+ unsigned int nents)
-+{
-+ int i;
-+
-+ for (i = 0; i < nents; i++)
-+ sg_init_table(&bam_sgl[i].sgl, 1);
-+}
-+
-+/*
-+ * qcom_bam_unmap_sg - Unmap QCOM BAM SGL
-+ * @dev: device for which unmapping needs to be done
-+ * @bam_sgl: bam sgl
-+ * @nents: number of entries in bam sgl
-+ * @dir: dma transfer direction
-+ *
-+ * This function performs the DMA unmapping for each SGL in BAM SGL
-+ * with generic SGL API.
-+ */
-+static inline void qcom_bam_unmap_sg(struct device *dev,
-+ struct qcom_bam_sgl *bam_sgl, int nents, enum dma_data_direction dir)
-+{
-+ int i;
-+
-+ for (i = 0; i < nents; i++)
-+ dma_unmap_sg(dev, &bam_sgl[i].sgl, 1, dir);
-+}
-+
-+/*
-+ * qcom_bam_map_sg - Map QCOM BAM SGL
-+ * @dev: device for which mapping needs to be done
-+ * @bam_sgl: bam sgl
-+ * @nents: number of entries in bam sgl
-+ * @dir: dma transfer direction
-+ *
-+ * This function performs the DMA mapping for each SGL in BAM SGL
-+ * with generic SGL API.
-+ *
-+ * returns 0 on error and > 0 on success
-+ */
-+static inline int qcom_bam_map_sg(struct device *dev,
-+ struct qcom_bam_sgl *bam_sgl, int nents, enum dma_data_direction dir)
-+{
-+ int i, ret = 0;
-+
-+ for (i = 0; i < nents; i++) {
-+ ret = dma_map_sg(dev, &bam_sgl[i].sgl, 1, dir);
-+ if (!ret)
-+ break;
-+ }
-+
-+ /* unmap the mapped sgl from previous loop in case of error */
-+ if (!ret)
-+ qcom_bam_unmap_sg(dev, bam_sgl, i, dir);
-+
-+ return ret;
-+}
-+
-+/*
-+ * qcom_prep_bam_ce - Wrapper function to prepare a single BAM command element
-+ * with the data that is passed to this function.
-+ * @bam_ce: bam command element
-+ * @addr: target address
-+ * @command: command in bam_command_type
-+ * @data: actual data for write and dest addr for read
-+ */
-+static inline void qcom_prep_bam_ce(struct bam_cmd_element *bam_ce,
-+ uint32_t addr, uint32_t command, uint32_t data)
-+{
-+ bam_ce->addr = cpu_to_le32(addr);
-+ bam_ce->command = cpu_to_le32(command);
-+ bam_ce->data = cpu_to_le32(data);
-+ bam_ce->mask = 0xFFFFFFFF;
-+}
-+#endif
diff --git a/target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch b/target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch
deleted file mode 100644
index 796938f2d0..0000000000
--- a/target/linux/ipq806x/patches-4.9/862-dmaengine-qcom-bam_dma-Add-custom-data-mapping.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From 5a7ccdf845d64b385affdcffaf2defbe9848be15 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Thu, 20 Apr 2017 10:39:00 +0530
-Subject: [PATCH] dmaengine: qcom: bam_dma: Add custom data mapping
-
-Add a new function to support for preparing DMA descriptor
-for custom data.
-
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- drivers/dma/qcom/bam_dma.c | 97 +++++++++++++++++++++++++++++++++++++---
- include/linux/dma/qcom_bam_dma.h | 14 ++++++
- include/linux/dmaengine.h | 14 ++++++
- 3 files changed, 119 insertions(+), 6 deletions(-)
-
---- a/drivers/dma/qcom/bam_dma.c
-+++ b/drivers/dma/qcom/bam_dma.c
-@@ -49,6 +49,7 @@
- #include <linux/clk.h>
- #include <linux/dmaengine.h>
- #include <linux/pm_runtime.h>
-+#include <linux/dma/qcom_bam_dma.h>
-
- #include "../dmaengine.h"
- #include "../virt-dma.h"
-@@ -61,11 +62,6 @@ struct bam_desc_hw {
-
- #define BAM_DMA_AUTOSUSPEND_DELAY 100
-
--#define DESC_FLAG_INT BIT(15)
--#define DESC_FLAG_EOT BIT(14)
--#define DESC_FLAG_EOB BIT(13)
--#define DESC_FLAG_NWD BIT(12)
--
- struct bam_async_desc {
- struct virt_dma_desc vd;
-
-@@ -670,6 +666,93 @@ err_out:
- }
-
- /**
-+ * bam_prep_dma_custom_mapping - Prep DMA descriptor from custom data
-+ *
-+ * @chan: dma channel
-+ * @data: custom data
-+ * @flags: DMA flags
-+ */
-+static struct dma_async_tx_descriptor *bam_prep_dma_custom_mapping(
-+ struct dma_chan *chan,
-+ void *data, unsigned long flags)
-+{
-+ struct bam_chan *bchan = to_bam_chan(chan);
-+ struct bam_device *bdev = bchan->bdev;
-+ struct bam_async_desc *async_desc;
-+ struct qcom_bam_custom_data *desc_data = data;
-+ u32 i;
-+ struct bam_desc_hw *desc;
-+ unsigned int num_alloc = 0;
-+
-+
-+ if (!is_slave_direction(desc_data->dir)) {
-+ dev_err(bdev->dev, "invalid dma direction\n");
-+ return NULL;
-+ }
-+
-+ /* calculate number of required entries */
-+ for (i = 0; i < desc_data->sgl_cnt; i++)
-+ num_alloc += DIV_ROUND_UP(
-+ sg_dma_len(&desc_data->bam_sgl[i].sgl), BAM_FIFO_SIZE);
-+
-+ /* allocate enough room to accommodate the number of entries */
-+ async_desc = kzalloc(sizeof(*async_desc) +
-+ (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT);
-+
-+ if (!async_desc)
-+ goto err_out;
-+
-+ if (flags & DMA_PREP_FENCE)
-+ async_desc->flags |= DESC_FLAG_NWD;
-+
-+ if (flags & DMA_PREP_INTERRUPT)
-+ async_desc->flags |= DESC_FLAG_EOT;
-+ else
-+ async_desc->flags |= DESC_FLAG_INT;
-+
-+ async_desc->num_desc = num_alloc;
-+ async_desc->curr_desc = async_desc->desc;
-+ async_desc->dir = desc_data->dir;
-+
-+ /* fill in temporary descriptors */
-+ desc = async_desc->desc;
-+ for (i = 0; i < desc_data->sgl_cnt; i++) {
-+ unsigned int remainder;
-+ unsigned int curr_offset = 0;
-+
-+ remainder = sg_dma_len(&desc_data->bam_sgl[i].sgl);
-+
-+ do {
-+ desc->addr = cpu_to_le32(
-+ sg_dma_address(&desc_data->bam_sgl[i].sgl) +
-+ curr_offset);
-+
-+ if (desc_data->bam_sgl[i].dma_flags)
-+ desc->flags |= cpu_to_le16(
-+ desc_data->bam_sgl[i].dma_flags);
-+
-+ if (remainder > BAM_FIFO_SIZE) {
-+ desc->size = cpu_to_le16(BAM_FIFO_SIZE);
-+ remainder -= BAM_FIFO_SIZE;
-+ curr_offset += BAM_FIFO_SIZE;
-+ } else {
-+ desc->size = cpu_to_le16(remainder);
-+ remainder = 0;
-+ }
-+
-+ async_desc->length += desc->size;
-+ desc++;
-+ } while (remainder > 0);
-+ }
-+
-+ return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags);
-+
-+err_out:
-+ kfree(async_desc);
-+ return NULL;
-+}
-+
-+/**
- * bam_dma_terminate_all - terminate all transactions on a channel
- * @bchan: bam dma channel
- *
-@@ -960,7 +1043,7 @@ static void bam_start_dma(struct bam_cha
-
- /* set any special flags on the last descriptor */
- if (async_desc->num_desc == async_desc->xfer_len)
-- desc[async_desc->xfer_len - 1].flags =
-+ desc[async_desc->xfer_len - 1].flags |=
- cpu_to_le16(async_desc->flags);
- else
- desc[async_desc->xfer_len - 1].flags |=
-@@ -1237,6 +1320,8 @@ static int bam_dma_probe(struct platform
- bdev->common.device_alloc_chan_resources = bam_alloc_chan;
- bdev->common.device_free_chan_resources = bam_free_chan;
- bdev->common.device_prep_slave_sg = bam_prep_slave_sg;
-+ bdev->common.device_prep_dma_custom_mapping =
-+ bam_prep_dma_custom_mapping;
- bdev->common.device_config = bam_slave_config;
- bdev->common.device_pause = bam_pause;
- bdev->common.device_resume = bam_resume;
---- a/include/linux/dma/qcom_bam_dma.h
-+++ b/include/linux/dma/qcom_bam_dma.h
-@@ -65,6 +65,19 @@ enum bam_command_type {
- };
-
- /*
-+ * QCOM BAM DMA custom data
-+ *
-+ * @sgl_cnt: number of sgl in bam_sgl
-+ * @dir: DMA data transfer direction
-+ * @bam_sgl: BAM SGL pointer
-+ */
-+struct qcom_bam_custom_data {
-+ u32 sgl_cnt;
-+ enum dma_transfer_direction dir;
-+ struct qcom_bam_sgl *bam_sgl;
-+};
-+
-+/*
- * qcom_bam_sg_init_table - Init QCOM BAM SGL
- * @bam_sgl: bam sgl
- * @nents: number of entries in bam sgl
---- a/include/linux/dmaengine.h
-+++ b/include/linux/dmaengine.h
-@@ -692,6 +692,8 @@ struct dma_filter {
- * be called after period_len bytes have been transferred.
- * @device_prep_interleaved_dma: Transfer expression in a generic way.
- * @device_prep_dma_imm_data: DMA's 8 byte immediate data to the dst address
-+ * @device_prep_dma_custom_mapping: prepares a dma operation from dma driver
-+ * specific custom data
- * @device_config: Pushes a new configuration to a channel, return 0 or an error
- * code
- * @device_pause: Pauses any transfer happening on a channel. Returns
-@@ -783,6 +785,9 @@ struct dma_device {
- struct dma_async_tx_descriptor *(*device_prep_dma_imm_data)(
- struct dma_chan *chan, dma_addr_t dst, u64 data,
- unsigned long flags);
-+ struct dma_async_tx_descriptor *(*device_prep_dma_custom_mapping)(
-+ struct dma_chan *chan, void *data,
-+ unsigned long flags);
-
- int (*device_config)(struct dma_chan *chan,
- struct dma_slave_config *config);
-@@ -899,6 +904,15 @@ static inline struct dma_async_tx_descri
- src_sg, src_nents, flags);
- }
-
-+static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_custom_mapping(
-+ struct dma_chan *chan,
-+ void *data,
-+ unsigned long flags)
-+{
-+ return chan->device->device_prep_dma_custom_mapping(chan, data,
-+ flags);
-+}
-+
- /**
- * dmaengine_terminate_all() - Terminate all active DMA transfers
- * @chan: The channel for which to terminate the transfers
diff --git a/target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch b/target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch
deleted file mode 100644
index f054927e03..0000000000
--- a/target/linux/ipq806x/patches-4.9/863-dts-ipq4019-add-nand-and-qpic-bam-dma-node.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 02bbf3c46e1e38e9ca699143566903683e3a015d Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Thu, 20 Apr 2017 10:45:00 +0530
-Subject: [PATCH] dts: ipq4019: add nand and qpic bam dma node
-
-This change adds QPIC BAM dma and NAND driver node's in
-IPQ4019 device tree, also enable this for AP-DK04.1 based
-boards.
-
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 75 +++++++++++++++++++++++++++
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 38 ++++++++++++++
- 2 files changed, 113 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-@@ -88,6 +88,86 @@
- bias-disable;
- };
- };
-+
-+ nand_pins: nand_pins {
-+
-+ mux_1 {
-+ pins = "gpio52", "gpio53", "gpio54",
-+ "gpio55", "gpio56", "gpio61",
-+ "gpio62", "gpio63", "gpio69";
-+ function = "qpic_pad";
-+ bias-disable;
-+ };
-+
-+ mux_2 {
-+ pins = "gpio67";
-+ function = "qpic_pad0";
-+ bias-disable;
-+ };
-+
-+ mux_3 {
-+ pins = "gpio64";
-+ function = "qpic_pad1";
-+ bias-disable;
-+ };
-+
-+ mux_4 {
-+ pins = "gpio65";
-+ function = "qpic_pad2";
-+ bias-disable;
-+ };
-+
-+ mux_5 {
-+ pins = "gpio66";
-+ function = "qpic_pad3";
-+ bias-disable;
-+ };
-+
-+ mux_6 {
-+ pins = "gpio57";
-+ function = "qpic_pad4";
-+ bias-disable;
-+ };
-+
-+ mux_7 {
-+ pins = "gpio58";
-+ function = "qpic_pad5";
-+ bias-disable;
-+ };
-+
-+ mux_8 {
-+ pins = "gpio59";
-+ function = "qpic_pad6";
-+ bias-disable;
-+ };
-+
-+ mux_9 {
-+ pins = "gpio60";
-+ function = "qpic_pad7";
-+ bias-disable;
-+ };
-+
-+ mux_10 {
-+ pins = "gpio68";
-+ function = "qpic_pad8";
-+ bias-disable;
-+ };
-+
-+ pullups {
-+ pins = "gpio52", "gpio53", "gpio58",
-+ "gpio59";
-+ bias-pull-up;
-+ };
-+
-+ pulldowns {
-+ pins = "gpio54", "gpio55", "gpio56",
-+ "gpio57", "gpio60", "gpio61",
-+ "gpio62", "gpio63", "gpio64",
-+ "gpio65", "gpio66", "gpio67",
-+ "gpio68", "gpio69";
-+ bias-pull-down;
-+ };
-+ };
- };
-
- blsp_dma: dma@7884000 {
-@@ -159,5 +239,15 @@
- watchdog@b017000 {
- status = "ok";
- };
-+
-+ qpic_bam: dma@7984000 {
-+ status = "ok";
-+ };
-+
-+ nand: qpic-nand@79b0000 {
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+ status = "ok";
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -580,5 +580,43 @@
- "legacy";
- status = "disabled";
- };
-+
-+ qpic_bam: dma@7984000 {
-+ compatible = "qcom,bam-v1.7.0";
-+ reg = <0x7984000 0x1a000>;
-+ interrupts = <0 101 0>;
-+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
-+ clock-names = "bam_clk";
-+ #dma-cells = <1>;
-+ qcom,ee = <0>;
-+ status = "disabled";
-+ };
-+
-+ nand: qpic-nand@79b0000 {
-+ compatible = "qcom,ebi2-nandc-bam", "qcom,msm-nand";
-+ reg = <0x79b0000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ clocks = <&gcc GCC_QPIC_CLK>,
-+ <&gcc GCC_QPIC_AHB_CLK>;
-+ clock-names = "core", "aon";
-+
-+ dmas = <&qpic_bam 0>,
-+ <&qpic_bam 1>,
-+ <&qpic_bam 2>;
-+ dma-names = "tx", "rx", "cmd";
-+ status = "disabled";
-+
-+ nandcs@0 {
-+ compatible = "qcom,nandcs";
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ nand-bus-width = <8>;
-+ };
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch b/target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch
deleted file mode 100644
index dbd5537f88..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-00-v3-1-2-dts-ipq4019-Fix-pinctrl-node-name.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From patchwork Mon Jul 3 07:47:12 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,1/2] dts: ipq4019: Fix pinctrl node name
-From: Varadarajan Narayanan <varada@codeaurora.org>
-X-Patchwork-Id: 9822099
-Message-Id: <1499068033-24000-2-git-send-email-varada@codeaurora.org>
-To: andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org,
- mark.rutland@arm.com, linux@armlinux.org.uk,
- linux-arm-msm@vger.kernel.org,
- linux-soc@vger.kernel.org, devicetree@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
-Cc: Varadarajan Narayanan <varada@codeaurora.org>
-Date: Mon, 3 Jul 2017 13:17:12 +0530
-
-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 2 +-
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -40,7 +40,7 @@
- clock-frequency = <48000000>;
- };
-
-- pinctrl@0x01000000 {
-+ pinctrl@1000000 {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -149,7 +149,7 @@
- reg = <0x1800000 0x60000>;
- };
-
-- tlmm: pinctrl@0x01000000 {
-+ tlmm: pinctrl@1000000 {
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x01000000 0x300000>;
- gpio-controller;
diff --git a/target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch
deleted file mode 100644
index 3e2c396111..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-00-v3-2-2-dts-ipq4019-Move-xo-and-timer-nodes-to-SoC-dtsi.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From patchwork Mon Jul 3 07:47:13 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,2/2] dts: ipq4019: Move xo and timer nodes to SoC dtsi
-From: Varadarajan Narayanan <varada@codeaurora.org>
-X-Patchwork-Id: 9822107
-Message-Id: <1499068033-24000-3-git-send-email-varada@codeaurora.org>
-To: andy.gross@linaro.org, david.brown@linaro.org, robh+dt@kernel.org,
- mark.rutland@arm.com, linux@armlinux.org.uk,
- linux-arm-msm@vger.kernel.org,
- linux-soc@vger.kernel.org, devicetree@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
-Cc: Varadarajan Narayanan <varada@codeaurora.org>
-Date: Mon, 3 Jul 2017 13:17:13 +0530
-
-The node for xo and timer belong to the SoC DTS file.
-Else, new board DT files may not inherit these nodes.
-
-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 19 -------------------
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 15 +++++++++++++++
- 2 files changed, 15 insertions(+), 19 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -20,26 +20,7 @@
- model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
- compatible = "qcom,ipq4019";
-
-- clocks {
-- xo: xo {
-- compatible = "fixed-clock";
-- clock-frequency = <48000000>;
-- #clock-cells = <0>;
-- };
-- };
--
- soc {
--
--
-- timer {
-- compatible = "arm,armv7-timer";
-- interrupts = <1 2 0xf08>,
-- <1 3 0xf08>,
-- <1 4 0xf08>,
-- <1 1 0xf08>;
-- clock-frequency = <48000000>;
-- };
--
- pinctrl@1000000 {
- serial_pins: serial_pinmux {
- mux {
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -126,6 +126,21 @@
- clock-frequency = <32768>;
- #clock-cells = <0>;
- };
-+
-+ xo: xo {
-+ compatible = "fixed-clock";
-+ clock-frequency = <48000000>;
-+ #clock-cells = <0>;
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <1 2 0xf08>,
-+ <1 3 0xf08>,
-+ <1 4 0xf08>,
-+ <1 1 0xf08>;
-+ clock-frequency = <48000000>;
- };
-
- soc {
diff --git a/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch b/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch
deleted file mode 100644
index f2de6d618a..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-01-dts-ipq4019-ap-dk04-fix-pinctrl-node-name.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-@@ -38,7 +38,7 @@
- clock-frequency = <48000000>;
- };
-
-- pinctrl@0x01000000 {
-+ pinctrl@1000000 {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
diff --git a/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch b/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch
deleted file mode 100644
index dcbdb8d777..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-02-dts-ipq4019-ap-dk04-remove-xo-and-timer-nodes.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
-@@ -20,24 +20,7 @@
- model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
- compatible = "qcom,ipq4019";
-
-- clocks {
-- xo: xo {
-- compatible = "fixed-clock";
-- clock-frequency = <48000000>;
-- #clock-cells = <0>;
-- };
-- };
--
- soc {
-- timer {
-- compatible = "arm,armv7-timer";
-- interrupts = <1 2 0xf08>,
-- <1 3 0xf08>,
-- <1 4 0xf08>,
-- <1 1 0xf08>;
-- clock-frequency = <48000000>;
-- };
--
- pinctrl@1000000 {
- serial_0_pins: serial_pinmux {
- mux {
diff --git a/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch
deleted file mode 100644
index 9d11dc022e..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-03-dts-ipq4019-ap-dk01-add-tcsr-config-to-dtsi.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -15,12 +15,39 @@
- */
-
- #include "qcom-ipq4019.dtsi"
-+#include <dt-bindings/soc/qcom,tcsr.h>
-
- / {
- model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
- compatible = "qcom,ipq4019";
-
- soc {
-+ tcsr@194b000 {
-+ /* select hostmode */
-+ compatible = "qcom,tcsr";
-+ reg = <0x194b000 0x100>;
-+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-+ status = "ok";
-+ };
-+
-+ ess_tcsr@1953000 {
-+ compatible = "qcom,tcsr";
-+ reg = <0x1953000 0x1000>;
-+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-+ };
-+
-+ tcsr@1949000 {
-+ compatible = "qcom,tcsr";
-+ reg = <0x1949000 0x100>;
-+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-+ };
-+
-+ tcsr@1957000 {
-+ compatible = "qcom,tcsr";
-+ reg = <0x1957000 0x100>;
-+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-+ };
-+
- pinctrl@1000000 {
- serial_pins: serial_pinmux {
- mux {
diff --git a/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch
deleted file mode 100644
index 02a102e37f..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-04-dts-ipq4019-ap-dk01-add-network-nodes-to-dtsi.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -136,5 +136,29 @@
- usb2: usb2@60f8800 {
- status = "ok";
- };
-+
-+ mdio@90000 {
-+ status = "okay";
-+ };
-+
-+ ess-switch@c000000 {
-+ status = "okay";
-+ };
-+
-+ ess-psgmii@98000 {
-+ status = "okay";
-+ };
-+
-+ edma@c080000 {
-+ status = "okay";
-+ };
-+
-+ wifi@a000000 {
-+ status = "okay";
-+ };
-+
-+ wifi@a800000 {
-+ status = "okay";
-+ };
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch b/target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch
deleted file mode 100644
index 0d4b80b302..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-05-dts-ipq4019-ap-dk01-remove-spi-chip-node-from-dtsi.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -89,14 +89,6 @@
- pinctrl-names = "default";
- status = "ok";
- cs-gpios = <&tlmm 54 0>;
--
-- mx25l25635e@0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- reg = <0>;
-- compatible = "mx25l25635e";
-- spi-max-frequency = <24000000>;
-- };
- };
-
- serial@78af000 {
diff --git a/target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch b/target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch
deleted file mode 100644
index 33f7f04f3c..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-06-dts-ipq4019-fix-max-cpu-speed.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -108,8 +108,8 @@
- opp-hz = /bits/ 64 <500000000>;
- clock-latency-ns = <256000>;
- };
-- opp@666000000 {
-- opp-hz = /bits/ 64 <666000000>;
-+ opp@716800000 {
-+ opp-hz = /bits/ 64 <716800000>;
- clock-latency-ns = <256000>;
- };
- };
diff --git a/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch b/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
deleted file mode 100644
index e9d262069f..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
+++ /dev/null
@@ -1,115 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-@@ -19,4 +19,112 @@
- / {
- model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-
-+ memory {
-+ device_type = "memory";
-+ reg = <0x80000000 0x10000000>;
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <0x1>;
-+ #size-cells = <0x1>;
-+ ranges;
-+
-+ apps_bl@87000000 {
-+ reg = <0x87000000 0x400000>;
-+ no-map;
-+ };
-+
-+ sbl@87400000 {
-+ reg = <0x87400000 0x100000>;
-+ no-map;
-+ };
-+
-+ cnss_debug@87500000 {
-+ reg = <0x87500000 0x600000>;
-+ no-map;
-+ };
-+
-+ cpu_context_dump@87b00000 {
-+ reg = <0x87b00000 0x080000>;
-+ no-map;
-+ };
-+
-+ tz_apps@87b80000 {
-+ reg = <0x87b80000 0x280000>;
-+ no-map;
-+ };
-+
-+ smem@87e00000 {
-+ reg = <0x87e00000 0x080000>;
-+ no-map;
-+ };
-+
-+ tz@87e80000 {
-+ reg = <0x87e80000 0x180000>;
-+ no-map;
-+ };
-+ };
-+};
-+
-+&spi_0 {
-+ mx25l25635f@0 {
-+ compatible = "mx25l25635f", "jedec,spi-nor";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ reg = <0>;
-+ spi-max-frequency = <24000000>;
-+
-+ SBL1@0 {
-+ label = "SBL1";
-+ reg = <0x0 0x40000>;
-+ read-only;
-+ };
-+ MIBIB@40000 {
-+ label = "MIBIB";
-+ reg = <0x40000 0x20000>;
-+ read-only;
-+ };
-+ QSEE@60000 {
-+ label = "QSEE";
-+ reg = <0x60000 0x60000>;
-+ read-only;
-+ };
-+ CDT@c0000 {
-+ label = "CDT";
-+ reg = <0xc0000 0x10000>;
-+ read-only;
-+ };
-+ DDRPARAMS@d0000 {
-+ label = "DDRPARAMS";
-+ reg = <0xd0000 0x10000>;
-+ read-only;
-+ };
-+ APPSBLENV@e0000 {
-+ label = "APPSBLENV";
-+ reg = <0xe0000 0x10000>;
-+ read-only;
-+ };
-+ APPSBL@f0000 {
-+ label = "APPSBL";
-+ reg = <0xf0000 0x80000>;
-+ read-only;
-+ };
-+ ART@170000 {
-+ label = "ART";
-+ reg = <0x170000 0x10000>;
-+ read-only;
-+ };
-+ kernel@180000 {
-+ label = "kernel";
-+ reg = <0x180000 0x400000>;
-+ };
-+ rootfs@580000 {
-+ label = "rootfs";
-+ reg = <0x580000 0x1600000>;
-+ };
-+ firmware@180000 {
-+ label = "firmware";
-+ reg = <0x180000 0x1a00000>;
-+ };
-+ };
- };
diff --git a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
deleted file mode 100644
index 2d4ff31046..0000000000
--- a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-@@ -18,6 +18,7 @@
-
- / {
- model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
-
- memory {
- device_type = "memory";