aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches/0158-usb-dwc3-qcom-Add-device-tree-binding.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches/0158-usb-dwc3-qcom-Add-device-tree-binding.patch')
-rw-r--r--target/linux/ipq806x/patches/0158-usb-dwc3-qcom-Add-device-tree-binding.patch125
1 files changed, 0 insertions, 125 deletions
diff --git a/target/linux/ipq806x/patches/0158-usb-dwc3-qcom-Add-device-tree-binding.patch b/target/linux/ipq806x/patches/0158-usb-dwc3-qcom-Add-device-tree-binding.patch
deleted file mode 100644
index ffe2a8d597..0000000000
--- a/target/linux/ipq806x/patches/0158-usb-dwc3-qcom-Add-device-tree-binding.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From c7045330c5976eb31bd79bc57c5db684588d595e Mon Sep 17 00:00:00 2001
-From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
-Date: Mon, 7 Oct 2013 10:44:55 +0300
-Subject: [PATCH 158/182] usb: dwc3: qcom: Add device tree binding
-
-QCOM USB3.0 core wrapper consist of USB3.0 IP from Synopsys
-(SNPS) and HS, SS PHY's control and configuration registers.
-
-It could operate in device mode (SS, HS, FS) and host
-mode (SS, HS, FS, LS).
-
-Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
-Acked-by: Stephen Warren <swarren@nvidia.com>
----
- .../devicetree/bindings/usb/qcom,dwc3.txt | 104 ++++++++++++++++++++
- 1 file changed, 104 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
-@@ -0,0 +1,104 @@
-+Qualcomm SuperSpeed DWC3 USB SoC controller
-+
-+
-+QCOM DWC3 Highspeed USB PHY
-+========================
-+Required properities:
-+- compatible: should contain "qcom,dwc3-hsphy";
-+- reg: offset and length of the register set in the memory map
-+- clocks: A list of phandle + clock-specifier pairs for the
-+ clocks listed in clock-names
-+- clock-names: Should contain the following:
-+ "utmi" UTMI clock
-+- v1p8-supply: phandle to the regulator for the 1.8v supply to HSPHY.
-+- v3p3-supply: phandle to the regulator for the 3.3v supply to HSPHY.
-+- vbus-supply: phandle to the regulator for the vbus supply for host
-+ mode.
-+- vddcx-supply: phandle to the regulator for the vdd supply for HSPHY
-+ digital circuit operation.
-+
-+Optional clocks:
-+ "xo" External reference clock
-+
-+
-+QCOM DWC3 Superspeed USB PHY
-+=========================
-+Required properities:
-+- compatible: should contain "qcom,dwc3-ssphy";
-+- reg: offset and length of the register set in the memory map
-+- clocks: A list of phandle + clock-specifier pairs for the
-+ clocks listed in clock-names
-+- clock-names: Should contain the following:
-+ "ref" Reference clock used in host mode.
-+- v1p8-supply: phandle to the regulator for the 1.8v supply to HSPHY.
-+- vddcx-supply: phandle to the regulator for the vdd supply for HSPHY
-+ digital circuit operation.
-+
-+Optional clocks:
-+ "xo" External reference clock
-+
-+QCOM DWC3 controller wrapper
-+===========================
-+Required properties:
-+- compatible: should contain "qcom,dwc3"
-+- clocks: A list of phandle + clock-specifier pairs for the
-+ clocks listed in clock-names
-+- clock-names: Should contain the following:
-+ "core" Master/Core clock, have to be >= 125 MHz for SS
-+ operation and >= 60MHz for HS operation
-+
-+Optional clocks:
-+ "iface" System bus AXI clock. Not present on all platforms
-+ "sleep" Sleep clock, used when USB3 core goes into low
-+ power mode (U3).
-+
-+Optional regulator:
-+- gdsc-supply: phandle to the regulator from globally distributed
-+ switch controller
-+
-+Required child node:
-+A child node must exist to represent the core DWC3 IP block. The name of
-+the node is not important. The content of the node is defined in dwc3.txt.
-+
-+Example device nodes:
-+
-+ hs_phy_0: phy@110f8800 {
-+ compatible = "qcom,dwc3-hsphy";
-+ reg = <0x110f8800 0x30>;
-+ clocks = <&gcc USB30_0_UTMI_CLK>;
-+ clock-names = "utmi";
-+
-+ status = "disabled";
-+ };
-+
-+ ss_phy_0: phy@110f8830 {
-+ compatible = "qcom,dwc3-ssphy";
-+ reg = <0x110f8830 0x30>;
-+
-+ clocks = <&gcc USB30_0_MASTER_CLK>;
-+ clock-names = "ref";
-+
-+ status = "disabled";
-+ };
-+
-+ usb3_0: usb30@0 {
-+ compatible = "qcom,dwc3";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc USB30_0_MASTER_CLK>;
-+ clock-names = "core";
-+
-+ ranges;
-+
-+ status = "disabled";
-+
-+ dwc3@11000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x11000000 0xcd00>;
-+ interrupts = <0 110 0x4>;
-+ usb-phy = <&hs_phy_0>, <&ss_phy_0>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ tx-fifo-resize;
-+ dr_mode = "host";
-+ };
-+ };