1 files changed, 0 insertions, 108 deletions
diff --git a/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch b/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch
deleted file mode 100644
index b460454352..0000000000
--- a/target/linux/ipq806x/patches/0151-ARM-ipq8064-Add-nand-device-info.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 4490cfa66379909cdddc3518c8e75b7cd26d8f69 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Mon, 16 Jun 2014 16:53:49 -0500
-Subject: [PATCH 151/182] ARM: ipq8064: Add nand device info
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts |   34 ++++++++++++++++++++++++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi      |   33 +++++++++++++++++++++++++++++
- 2 files changed, 67 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -45,6 +45,29 @@
- 					bias-none;
- 				};
- 			};
-+			nand_pins: nand_pins {
-+				mux {
-+					pins = "gpio34", "gpio35", "gpio36",
-+						"gpio37", "gpio38", "gpio39",
-+						"gpio40", "gpio41", "gpio42",
-+						"gpio43", "gpio44", "gpio45",
-+						"gpio46", "gpio47";
-+					function = "nand";
-+					drive-strength = <10>;
-+					bias-disable;
-+				};
-+				pullups {
-+					pins = "gpio39";
-+					bias-pull-up;
-+				};
-+				hold {
-+					pins = "gpio40", "gpio41", "gpio42",
-+						"gpio43", "gpio44", "gpio45",
-+						"gpio46", "gpio47";
-+					bias-bus-hold;
-+				};
-+			};
-+
- 		};
- 
- 		gsbi@16300000 {
-@@ -126,5 +149,16 @@
- 		sata@29000000 {
- 			status = "ok";
- 		};
-+
-+		dma@18300000 {
-+			status = "ok";
-+		};
-+
-+		nand@0x1ac00000 {
-+			status = "ok";
-+
-+			pinctrl-0 = <&nand_pins>;
-+			pinctrl-names = "default";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -76,6 +76,7 @@
- 			interrupt-controller;
- 			#interrupt-cells = <2>;
- 			interrupts = <0 32 0x4>;
-+
- 		};
- 
- 		intc: interrupt-controller@2000000 {
-@@ -369,5 +370,37 @@
- 			phy-names = "sata-phy";
- 			status = "disabled";
- 		};
-+
-+		adm_dma: dma@18300000 {
-+			compatible = "qcom,adm";
-+			reg = <0x18300000 0x100000>;
-+			interrupts = <0 170 0>;
-+
-+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-+			clock-names = "core_clk", "iface_clk";
-+
-+			resets = <&gcc ADM0_RESET>,
-+				<&gcc ADM0_PBUS_RESET>,
-+				<&gcc ADM0_C0_RESET>,
-+				<&gcc ADM0_C1_RESET>,
-+				<&gcc ADM0_C2_RESET>;
-+
-+			reset-names = "adm", "pbus", "c0", "c1", "c2";
-+
-+			status = "disabled";
-+		};
-+
-+		nand@0x1ac00000 {
-+			compatible = "qcom,qcom_nand";
-+			reg = <0x1ac00000 0x800>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			clocks = <&gcc EBI2_CLK>;
-+			clock-names = "core_clk";
-+
-+
-+			status = "disabled";
-+		};
- 	};
- };