1 files changed, 0 insertions, 57 deletions
diff --git a/target/linux/ipq806x/patches/0143-ata-qcom-Add-device-tree-bindings-information.patch b/target/linux/ipq806x/patches/0143-ata-qcom-Add-device-tree-bindings-information.patch
deleted file mode 100644
index 01ca7336ee..0000000000
--- a/target/linux/ipq806x/patches/0143-ata-qcom-Add-device-tree-bindings-information.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From dd280a4cf6b826144f74d3fc4285633f1c337a1d Mon Sep 17 00:00:00 2001
-From: Kumar Gala <galak@codeaurora.org>
-Date: Thu, 12 Jun 2014 11:28:47 -0500
-Subject: [PATCH 143/182] ata: qcom: Add device tree bindings information
-
-Add device tree binding for Qualcomm AHCI SATA controller and specifically
-the sata controller on the IPQ806x family of SoCs.
-
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
----
- .../devicetree/bindings/ata/qcom-sata.txt          |   40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/ata/qcom-sata.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/ata/qcom-sata.txt
-@@ -0,0 +1,40 @@
-+* Qualcomm AHCI SATA Controller
-+
-+SATA nodes are defined to describe on-chip Serial ATA controllers.
-+Each SATA controller should have its own node.
-+
-+Required properties:
-+- compatible		: compatible list, contains "qcom,msm-ahci"
-+- interrupts		: <interrupt mapping for SATA IRQ>
-+- reg			: <registers mapping>
-+- phys			: Must contain exactly one entry as specified
-+			  in phy-bindings.txt
-+- phy-names		: Must be "sata-phy"
-+
-+Required properties for "qcom,ipq806x-ahci" compatible:
-+- clocks		: Must contain an entry for each entry in clock-names.
-+- clock-names		: Shall be:
-+				"slave_iface" - Fabric port AHB clock for SATA
-+				"iface" - AHB clock
-+				"core" - core clock
-+				"rxoob" - RX out-of-band clock
-+				"pmalive" - Power Module Alive clock
-+
-+Example:
-+	sata@29000000 {
-+		compatible = "qcom,ipq806x-ahci", "qcom,msm-ahci";
-+		reg = <0x29000000 0x180>;
-+
-+		interrupts = <0 209 0x0>;
-+
-+		clocks = <&gcc SFAB_SATA_S_H_CLK>,
-+			 <&gcc SATA_H_CLK>,
-+			 <&gcc SATA_A_CLK>,
-+			 <&gcc SATA_RXOOB_CLK>,
-+			 <&gcc SATA_PMALIVE_CLK>;
-+		clock-names = "slave_iface", "iface", "core",
-+				"rxoob", "pmalive";
-+
-+		phys = <&sata_phy>;
-+		phy-names = "sata-phy";
-+	};