aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches/0060-i2c-qup-New-bus-driver-for-the-Qualcomm-QUP-I2C-cont.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches/0060-i2c-qup-New-bus-driver-for-the-Qualcomm-QUP-I2C-cont.patch')
-rw-r--r--target/linux/ipq806x/patches/0060-i2c-qup-New-bus-driver-for-the-Qualcomm-QUP-I2C-cont.patch835
1 files changed, 835 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches/0060-i2c-qup-New-bus-driver-for-the-Qualcomm-QUP-I2C-cont.patch b/target/linux/ipq806x/patches/0060-i2c-qup-New-bus-driver-for-the-Qualcomm-QUP-I2C-cont.patch
new file mode 100644
index 0000000000..64993a3e8c
--- /dev/null
+++ b/target/linux/ipq806x/patches/0060-i2c-qup-New-bus-driver-for-the-Qualcomm-QUP-I2C-cont.patch
@@ -0,0 +1,835 @@
+From 226eff10dc11af5d6b1bc31e5cedc079aa564fb3 Mon Sep 17 00:00:00 2001
+From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+Date: Thu, 13 Mar 2014 19:07:43 -0700
+Subject: [PATCH 060/182] i2c: qup: New bus driver for the Qualcomm QUP I2C
+ controller
+
+This bus driver supports the QUP i2c hardware controller in the Qualcomm SOCs.
+The Qualcomm Universal Peripheral Engine (QUP) is a general purpose data path
+engine with input/output FIFOs and an embedded i2c mini-core. The driver
+supports FIFO mode (for low bandwidth applications) and block mode (interrupt
+generated for each block-size data transfer).
+
+Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
+Reviewed-by: Andy Gross <agross@codeaurora.org>
+Tested-by: Philip Elcan <pelcan@codeaurora.org>
+[wsa: removed needless IS_ERR_VALUE]
+Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
+---
+ drivers/i2c/busses/Kconfig | 10 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-qup.c | 768 ++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 779 insertions(+)
+ create mode 100644 drivers/i2c/busses/i2c-qup.c
+
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index de17c55..1886315 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -648,6 +648,16 @@ config I2C_PXA_SLAVE
+ is necessary for systems where the PXA may be a target on the
+ I2C bus.
+
++config I2C_QUP
++ tristate "Qualcomm QUP based I2C controller"
++ depends on ARCH_QCOM
++ help
++ If you say yes to this option, support will be included for the
++ built-in I2C interface on the Qualcomm SoCs.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-qup.
++
+ config I2C_RIIC
+ tristate "Renesas RIIC adapter"
+ depends on ARCH_SHMOBILE || COMPILE_TEST
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index a08931f..bf2257b 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
+ obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
+ obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
++obj-$(CONFIG_I2C_QUP) += i2c-qup.o
+ obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
+ obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
+ obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
+diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
+new file mode 100644
+index 0000000..c9d5f78
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-qup.c
+@@ -0,0 +1,768 @@
++/*
++ * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
++ * Copyright (c) 2014, Sony Mobile Communications AB.
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 and
++ * only version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/i2c.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/pm_runtime.h>
++
++/* QUP Registers */
++#define QUP_CONFIG 0x000
++#define QUP_STATE 0x004
++#define QUP_IO_MODE 0x008
++#define QUP_SW_RESET 0x00c
++#define QUP_OPERATIONAL 0x018
++#define QUP_ERROR_FLAGS 0x01c
++#define QUP_ERROR_FLAGS_EN 0x020
++#define QUP_HW_VERSION 0x030
++#define QUP_MX_OUTPUT_CNT 0x100
++#define QUP_OUT_FIFO_BASE 0x110
++#define QUP_MX_WRITE_CNT 0x150
++#define QUP_MX_INPUT_CNT 0x200
++#define QUP_MX_READ_CNT 0x208
++#define QUP_IN_FIFO_BASE 0x218
++#define QUP_I2C_CLK_CTL 0x400
++#define QUP_I2C_STATUS 0x404
++
++/* QUP States and reset values */
++#define QUP_RESET_STATE 0
++#define QUP_RUN_STATE 1
++#define QUP_PAUSE_STATE 3
++#define QUP_STATE_MASK 3
++
++#define QUP_STATE_VALID BIT(2)
++#define QUP_I2C_MAST_GEN BIT(4)
++
++#define QUP_OPERATIONAL_RESET 0x000ff0
++#define QUP_I2C_STATUS_RESET 0xfffffc
++
++/* QUP OPERATIONAL FLAGS */
++#define QUP_I2C_NACK_FLAG BIT(3)
++#define QUP_OUT_NOT_EMPTY BIT(4)
++#define QUP_IN_NOT_EMPTY BIT(5)
++#define QUP_OUT_FULL BIT(6)
++#define QUP_OUT_SVC_FLAG BIT(8)
++#define QUP_IN_SVC_FLAG BIT(9)
++#define QUP_MX_OUTPUT_DONE BIT(10)
++#define QUP_MX_INPUT_DONE BIT(11)
++
++/* I2C mini core related values */
++#define QUP_CLOCK_AUTO_GATE BIT(13)
++#define I2C_MINI_CORE (2 << 8)
++#define I2C_N_VAL 15
++/* Most significant word offset in FIFO port */
++#define QUP_MSW_SHIFT (I2C_N_VAL + 1)
++
++/* Packing/Unpacking words in FIFOs, and IO modes */
++#define QUP_OUTPUT_BLK_MODE (1 << 10)
++#define QUP_INPUT_BLK_MODE (1 << 12)
++#define QUP_UNPACK_EN BIT(14)
++#define QUP_PACK_EN BIT(15)
++
++#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN)
++
++#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
++#define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07)
++#define QUP_INPUT_BLOCK_SIZE(x) (((x) >> 5) & 0x03)
++#define QUP_INPUT_FIFO_SIZE(x) (((x) >> 7) & 0x07)
++
++/* QUP tags */
++#define QUP_TAG_START (1 << 8)
++#define QUP_TAG_DATA (2 << 8)
++#define QUP_TAG_STOP (3 << 8)
++#define QUP_TAG_REC (4 << 8)
++
++/* Status, Error flags */
++#define I2C_STATUS_WR_BUFFER_FULL BIT(0)
++#define I2C_STATUS_BUS_ACTIVE BIT(8)
++#define I2C_STATUS_ERROR_MASK 0x38000fc
++#define QUP_STATUS_ERROR_FLAGS 0x7c
++
++#define QUP_READ_LIMIT 256
++
++struct qup_i2c_dev {
++ struct device *dev;
++ void __iomem *base;
++ int irq;
++ struct clk *clk;
++ struct clk *pclk;
++ struct i2c_adapter adap;
++
++ int clk_ctl;
++ int out_fifo_sz;
++ int in_fifo_sz;
++ int out_blk_sz;
++ int in_blk_sz;
++
++ unsigned long one_byte_t;
++
++ struct i2c_msg *msg;
++ /* Current posion in user message buffer */
++ int pos;
++ /* I2C protocol errors */
++ u32 bus_err;
++ /* QUP core errors */
++ u32 qup_err;
++
++ struct completion xfer;
++};
++
++static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
++{
++ struct qup_i2c_dev *qup = dev;
++ u32 bus_err;
++ u32 qup_err;
++ u32 opflags;
++
++ bus_err = readl(qup->base + QUP_I2C_STATUS);
++ qup_err = readl(qup->base + QUP_ERROR_FLAGS);
++ opflags = readl(qup->base + QUP_OPERATIONAL);
++
++ if (!qup->msg) {
++ /* Clear Error interrupt */
++ writel(QUP_RESET_STATE, qup->base + QUP_STATE);
++ return IRQ_HANDLED;
++ }
++
++ bus_err &= I2C_STATUS_ERROR_MASK;
++ qup_err &= QUP_STATUS_ERROR_FLAGS;
++
++ if (qup_err) {
++ /* Clear Error interrupt */
++ writel(qup_err, qup->base + QUP_ERROR_FLAGS);
++ goto done;
++ }
++
++ if (bus_err) {
++ /* Clear Error interrupt */
++ writel(QUP_RESET_STATE, qup->base + QUP_STATE);
++ goto done;
++ }
++
++ if (opflags & QUP_IN_SVC_FLAG)
++ writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
++
++ if (opflags & QUP_OUT_SVC_FLAG)
++ writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
++
++done:
++ qup->qup_err = qup_err;
++ qup->bus_err = bus_err;
++ complete(&qup->xfer);
++ return IRQ_HANDLED;
++}
++
++static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup,
++ u32 req_state, u32 req_mask)
++{
++ int retries = 1;
++ u32 state;
++
++ /*
++ * State transition takes 3 AHB clocks cycles + 3 I2C master clock
++ * cycles. So retry once after a 1uS delay.
++ */
++ do {
++ state = readl(qup->base + QUP_STATE);
++
++ if (state & QUP_STATE_VALID &&
++ (state & req_mask) == req_state)
++ return 0;
++
++ udelay(1);
++ } while (retries--);
++
++ return -ETIMEDOUT;
++}
++
++static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
++{
++ return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
++}
++
++static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
++{
++ return qup_i2c_poll_state_mask(qup, 0, 0);
++}
++
++static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup)
++{
++ return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN);
++}
++
++static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
++{
++ if (qup_i2c_poll_state_valid(qup) != 0)
++ return -EIO;
++
++ writel(state, qup->base + QUP_STATE);
++
++ if (qup_i2c_poll_state(qup, state) != 0)
++ return -EIO;
++ return 0;
++}
++
++static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup)
++{
++ unsigned long timeout;
++ u32 opflags;
++ u32 status;
++
++ timeout = jiffies + HZ;
++
++ for (;;) {
++ opflags = readl(qup->base + QUP_OPERATIONAL);
++ status = readl(qup->base + QUP_I2C_STATUS);
++
++ if (!(opflags & QUP_OUT_NOT_EMPTY) &&
++ !(status & I2C_STATUS_BUS_ACTIVE))
++ return 0;
++
++ if (time_after(jiffies, timeout))
++ return -ETIMEDOUT;
++
++ usleep_range(qup->one_byte_t, qup->one_byte_t * 2);
++ }
++}
++
++static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
++{
++ /* Number of entries to shift out, including the start */
++ int total = msg->len + 1;
++
++ if (total < qup->out_fifo_sz) {
++ /* FIFO mode */
++ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
++ writel(total, qup->base + QUP_MX_WRITE_CNT);
++ } else {
++ /* BLOCK mode (transfer data on chunks) */
++ writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
++ qup->base + QUP_IO_MODE);
++ writel(total, qup->base + QUP_MX_OUTPUT_CNT);
++ }
++}
++
++static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
++{
++ u32 addr = msg->addr << 1;
++ u32 qup_tag;
++ u32 opflags;
++ int idx;
++ u32 val;
++
++ if (qup->pos == 0) {
++ val = QUP_TAG_START | addr;
++ idx = 1;
++ } else {
++ val = 0;
++ idx = 0;
++ }
++
++ while (qup->pos < msg->len) {
++ /* Check that there's space in the FIFO for our pair */
++ opflags = readl(qup->base + QUP_OPERATIONAL);
++ if (opflags & QUP_OUT_FULL)
++ break;
++
++ if (qup->pos == msg->len - 1)
++ qup_tag = QUP_TAG_STOP;
++ else
++ qup_tag = QUP_TAG_DATA;
++
++ if (idx & 1)
++ val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT;
++ else
++ val = qup_tag | msg->buf[qup->pos];
++
++ /* Write out the pair and the last odd value */
++ if (idx & 1 || qup->pos == msg->len - 1)
++ writel(val, qup->base + QUP_OUT_FIFO_BASE);
++
++ qup->pos++;
++ idx++;
++ }
++}
++
++static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
++{
++ unsigned long left;
++ int ret;
++
++ qup->msg = msg;
++ qup->pos = 0;
++
++ enable_irq(qup->irq);
++
++ qup_i2c_set_write_mode(qup, msg);
++
++ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
++ if (ret)
++ goto err;
++
++ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
++
++ do {
++ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
++ if (ret)
++ goto err;
++
++ qup_i2c_issue_write(qup, msg);
++
++ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
++ if (ret)
++ goto err;
++
++ left = wait_for_completion_timeout(&qup->xfer, HZ);
++ if (!left) {
++ writel(1, qup->base + QUP_SW_RESET);
++ ret = -ETIMEDOUT;
++ goto err;
++ }
++
++ if (qup->bus_err || qup->qup_err) {
++ if (qup->bus_err & QUP_I2C_NACK_FLAG)
++ dev_err(qup->dev, "NACK from %x\n", msg->addr);
++ ret = -EIO;
++ goto err;
++ }
++ } while (qup->pos < msg->len);
++
++ /* Wait for the outstanding data in the fifo to drain */
++ ret = qup_i2c_wait_writeready(qup);
++
++err:
++ disable_irq(qup->irq);
++ qup->msg = NULL;
++
++ return ret;
++}
++
++static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
++{
++ if (len < qup->in_fifo_sz) {
++ /* FIFO mode */
++ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
++ writel(len, qup->base + QUP_MX_READ_CNT);
++ } else {
++ /* BLOCK mode (transfer data on chunks) */
++ writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
++ qup->base + QUP_IO_MODE);
++ writel(len, qup->base + QUP_MX_INPUT_CNT);
++ }
++}
++
++static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
++{
++ u32 addr, len, val;
++
++ addr = (msg->addr << 1) | 1;
++
++ /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
++ len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
++
++ val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
++ writel(val, qup->base + QUP_OUT_FIFO_BASE);
++}
++
++
++static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
++{
++ u32 opflags;
++ u32 val = 0;
++ int idx;
++
++ for (idx = 0; qup->pos < msg->len; idx++) {
++ if ((idx & 1) == 0) {
++ /* Check that FIFO have data */
++ opflags = readl(qup->base + QUP_OPERATIONAL);
++ if (!(opflags & QUP_IN_NOT_EMPTY))
++ break;
++
++ /* Reading 2 words at time */
++ val = readl(qup->base + QUP_IN_FIFO_BASE);
++
++ msg->buf[qup->pos++] = val & 0xFF;
++ } else {
++ msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
++ }
++ }
++}
++
++static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
++{
++ unsigned long left;
++ int ret;
++
++ /*
++ * The QUP block will issue a NACK and STOP on the bus when reaching
++ * the end of the read, the length of the read is specified as one byte
++ * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
++ */
++ if (msg->len > QUP_READ_LIMIT) {
++ dev_err(qup->dev, "HW not capable of reads over %d bytes\n",
++ QUP_READ_LIMIT);
++ return -EINVAL;
++ }
++
++ qup->msg = msg;
++ qup->pos = 0;
++
++ enable_irq(qup->irq);
++
++ qup_i2c_set_read_mode(qup, msg->len);
++
++ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
++ if (ret)
++ goto err;
++
++ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
++
++ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
++ if (ret)
++ goto err;
++
++ qup_i2c_issue_read(qup, msg);
++
++ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
++ if (ret)
++ goto err;
++
++ do {
++ left = wait_for_completion_timeout(&qup->xfer, HZ);
++ if (!left) {
++ writel(1, qup->base + QUP_SW_RESET);
++ ret = -ETIMEDOUT;
++ goto err;
++ }
++
++ if (qup->bus_err || qup->qup_err) {
++ if (qup->bus_err & QUP_I2C_NACK_FLAG)
++ dev_err(qup->dev, "NACK from %x\n", msg->addr);
++ ret = -EIO;
++ goto err;
++ }
++
++ qup_i2c_read_fifo(qup, msg);
++ } while (qup->pos < msg->len);
++
++err:
++ disable_irq(qup->irq);
++ qup->msg = NULL;
++
++ return ret;
++}
++
++static int qup_i2c_xfer(struct i2c_adapter *adap,
++ struct i2c_msg msgs[],
++ int num)
++{
++ struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
++ int ret, idx;
++
++ ret = pm_runtime_get_sync(qup->dev);
++ if (ret)
++ goto out;
++
++ writel(1, qup->base + QUP_SW_RESET);
++ ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
++ if (ret)
++ goto out;
++
++ /* Configure QUP as I2C mini core */
++ writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
++
++ for (idx = 0; idx < num; idx++) {
++ if (msgs[idx].len == 0) {
++ ret = -EINVAL;
++ goto out;
++ }
++
++ if (qup_i2c_poll_state_i2c_master(qup)) {
++ ret = -EIO;
++ goto out;
++ }
++
++ if (msgs[idx].flags & I2C_M_RD)
++ ret = qup_i2c_read_one(qup, &msgs[idx]);
++ else
++ ret = qup_i2c_write_one(qup, &msgs[idx]);
++
++ if (ret)
++ break;
++
++ ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
++ if (ret)
++ break;
++ }
++
++ if (ret == 0)
++ ret = num;
++out:
++
++ pm_runtime_mark_last_busy(qup->dev);
++ pm_runtime_put_autosuspend(qup->dev);
++
++ return ret;
++}
++
++static u32 qup_i2c_func(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
++}
++
++static const struct i2c_algorithm qup_i2c_algo = {
++ .master_xfer = qup_i2c_xfer,
++ .functionality = qup_i2c_func,
++};
++
++static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
++{
++ clk_prepare_enable(qup->clk);
++ clk_prepare_enable(qup->pclk);
++}
++
++static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
++{
++ u32 config;
++
++ qup_i2c_change_state(qup, QUP_RESET_STATE);
++ clk_disable_unprepare(qup->clk);
++ config = readl(qup->base + QUP_CONFIG);
++ config |= QUP_CLOCK_AUTO_GATE;
++ writel(config, qup->base + QUP_CONFIG);
++ clk_disable_unprepare(qup->pclk);
++}
++
++static int qup_i2c_probe(struct platform_device *pdev)
++{
++ static const int blk_sizes[] = {4, 16, 32};
++ struct device_node *node = pdev->dev.of_node;
++ struct qup_i2c_dev *qup;
++ unsigned long one_bit_t;
++ struct resource *res;
++ u32 io_mode, hw_ver, size;
++ int ret, fs_div, hs_div;
++ int src_clk_freq;
++ int clk_freq = 100000;
++
++ qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
++ if (!qup)
++ return -ENOMEM;
++
++ qup->dev = &pdev->dev;
++ init_completion(&qup->xfer);
++ platform_set_drvdata(pdev, qup);
++
++ of_property_read_u32(node, "clock-frequency", &clk_freq);
++
++ /* We support frequencies up to FAST Mode (400KHz) */
++ if (!clk_freq || clk_freq > 400000) {
++ dev_err(qup->dev, "clock frequency not supported %d\n",
++ clk_freq);
++ return -EINVAL;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ qup->base = devm_ioremap_resource(qup->dev, res);
++ if (IS_ERR(qup->base))
++ return PTR_ERR(qup->base);
++
++ qup->irq = platform_get_irq(pdev, 0);
++ if (qup->irq < 0) {
++ dev_err(qup->dev, "No IRQ defined\n");
++ return qup->irq;
++ }
++
++ qup->clk = devm_clk_get(qup->dev, "core");
++ if (IS_ERR(qup->clk)) {
++ dev_err(qup->dev, "Could not get core clock\n");
++ return PTR_ERR(qup->clk);
++ }
++
++ qup->pclk = devm_clk_get(qup->dev, "iface");
++ if (IS_ERR(qup->pclk)) {
++ dev_err(qup->dev, "Could not get iface clock\n");
++ return PTR_ERR(qup->pclk);
++ }
++
++ qup_i2c_enable_clocks(qup);
++
++ /*
++ * Bootloaders might leave a pending interrupt on certain QUP's,
++ * so we reset the core before registering for interrupts.
++ */
++ writel(1, qup->base + QUP_SW_RESET);
++ ret = qup_i2c_poll_state_valid(qup);
++ if (ret)
++ goto fail;
++
++ ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt,
++ IRQF_TRIGGER_HIGH, "i2c_qup", qup);
++ if (ret) {
++ dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq);
++ goto fail;
++ }
++ disable_irq(qup->irq);
++
++ hw_ver = readl(qup->base + QUP_HW_VERSION);
++ dev_dbg(qup->dev, "Revision %x\n", hw_ver);
++
++ io_mode = readl(qup->base + QUP_IO_MODE);
++
++ /*
++ * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag'
++ * associated with each byte written/received
++ */
++ size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
++ if (size > ARRAY_SIZE(blk_sizes))
++ return -EIO;
++ qup->out_blk_sz = blk_sizes[size] / 2;
++
++ size = QUP_INPUT_BLOCK_SIZE(io_mode);
++ if (size > ARRAY_SIZE(blk_sizes))
++ return -EIO;
++ qup->in_blk_sz = blk_sizes[size] / 2;
++
++ size = QUP_OUTPUT_FIFO_SIZE(io_mode);
++ qup->out_fifo_sz = qup->out_blk_sz * (2 << size);
++
++ size = QUP_INPUT_FIFO_SIZE(io_mode);
++ qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
++
++ src_clk_freq = clk_get_rate(qup->clk);
++ fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
++ hs_div = 3;
++ qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
++
++ /*
++ * Time it takes for a byte to be clocked out on the bus.
++ * Each byte takes 9 clock cycles (8 bits + 1 ack).
++ */
++ one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
++ qup->one_byte_t = one_bit_t * 9;
++
++ dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
++ qup->in_blk_sz, qup->in_fifo_sz,
++ qup->out_blk_sz, qup->out_fifo_sz);
++
++ i2c_set_adapdata(&qup->adap, qup);
++ qup->adap.algo = &qup_i2c_algo;
++ qup->adap.dev.parent = qup->dev;
++ qup->adap.dev.of_node = pdev->dev.of_node;
++ strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
++
++ ret = i2c_add_adapter(&qup->adap);
++ if (ret)
++ goto fail;
++
++ pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
++ pm_runtime_use_autosuspend(qup->dev);
++ pm_runtime_set_active(qup->dev);
++ pm_runtime_enable(qup->dev);
++ return 0;
++
++fail:
++ qup_i2c_disable_clocks(qup);
++ return ret;
++}
++
++static int qup_i2c_remove(struct platform_device *pdev)
++{
++ struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
++
++ disable_irq(qup->irq);
++ qup_i2c_disable_clocks(qup);
++ i2c_del_adapter(&qup->adap);
++ pm_runtime_disable(qup->dev);
++ pm_runtime_set_suspended(qup->dev);
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int qup_i2c_pm_suspend_runtime(struct device *device)
++{
++ struct qup_i2c_dev *qup = dev_get_drvdata(device);
++
++ dev_dbg(device, "pm_runtime: suspending...\n");
++ qup_i2c_disable_clocks(qup);
++ return 0;
++}
++
++static int qup_i2c_pm_resume_runtime(struct device *device)
++{
++ struct qup_i2c_dev *qup = dev_get_drvdata(device);
++
++ dev_dbg(device, "pm_runtime: resuming...\n");
++ qup_i2c_enable_clocks(qup);
++ return 0;
++}
++#endif
++
++#ifdef CONFIG_PM_SLEEP
++static int qup_i2c_suspend(struct device *device)
++{
++ qup_i2c_pm_suspend_runtime(device);
++ return 0;
++}
++
++static int qup_i2c_resume(struct device *device)
++{
++ qup_i2c_pm_resume_runtime(device);
++ pm_runtime_mark_last_busy(device);
++ pm_request_autosuspend(device);
++ return 0;
++}
++#endif
++
++static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
++ SET_SYSTEM_SLEEP_PM_OPS(
++ qup_i2c_suspend,
++ qup_i2c_resume)
++ SET_RUNTIME_PM_OPS(
++ qup_i2c_pm_suspend_runtime,
++ qup_i2c_pm_resume_runtime,
++ NULL)
++};
++
++static const struct of_device_id qup_i2c_dt_match[] = {
++ { .compatible = "qcom,i2c-qup-v1.1.1" },
++ { .compatible = "qcom,i2c-qup-v2.1.1" },
++ { .compatible = "qcom,i2c-qup-v2.2.1" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
++
++static struct platform_driver qup_i2c_driver = {
++ .probe = qup_i2c_probe,
++ .remove = qup_i2c_remove,
++ .driver = {
++ .name = "i2c_qup",
++ .owner = THIS_MODULE,
++ .pm = &qup_i2c_qup_pm_ops,
++ .of_match_table = qup_i2c_dt_match,
++ },
++};
++
++module_platform_driver(qup_i2c_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:i2c_qup");
+--
+1.7.10.4
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 16:02:17 +0000