diff options
Diffstat (limited to 'target/linux/ipq806x/patches/0056-spmi-Add-MSM-PMIC-Arbiter-SPMI-controller.patch')
-rw-r--r-- | target/linux/ipq806x/patches/0056-spmi-Add-MSM-PMIC-Arbiter-SPMI-controller.patch | 467 |
1 files changed, 0 insertions, 467 deletions
diff --git a/target/linux/ipq806x/patches/0056-spmi-Add-MSM-PMIC-Arbiter-SPMI-controller.patch b/target/linux/ipq806x/patches/0056-spmi-Add-MSM-PMIC-Arbiter-SPMI-controller.patch deleted file mode 100644 index e2fde2d788..0000000000 --- a/target/linux/ipq806x/patches/0056-spmi-Add-MSM-PMIC-Arbiter-SPMI-controller.patch +++ /dev/null @@ -1,467 +0,0 @@ -From 1e1f53fbc2848b23af572c16d19e8004f6a7c9c1 Mon Sep 17 00:00:00 2001 -From: Kenneth Heitke <kheitke@codeaurora.org> -Date: Wed, 12 Feb 2014 13:44:24 -0600 -Subject: [PATCH 056/182] spmi: Add MSM PMIC Arbiter SPMI controller - -Qualcomm's PMIC Arbiter SPMI controller functions as a bus master and -is used to communication with one or more PMIC (slave) devices on the -SPMI bus. The PMIC Arbiter is actually a hardware wrapper around the -SPMI controller that provides concurrent and autonomous PMIC access -to various entities that need to communicate with the PMIC. - -The SPMI controller hardware handles all of the SPMI bus activity (bus -arbitration, sequence start condition, transmission of frames, etc). -This software driver uses the PMIC Arbiter register interface to -initiate command sequences on the SPMI bus. The status register is -read to determine when the command sequence has completed and whether -or not it completed successfully. - -Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org> -Signed-off-by: Josh Cartwright <joshc@codeaurora.org> -Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ---- - drivers/spmi/Kconfig | 17 ++ - drivers/spmi/Makefile | 2 + - drivers/spmi/spmi-pmic-arb.c | 405 ++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 424 insertions(+) - create mode 100644 drivers/spmi/spmi-pmic-arb.c - ---- a/drivers/spmi/Kconfig -+++ b/drivers/spmi/Kconfig -@@ -7,3 +7,20 @@ menuconfig SPMI - SPMI (System Power Management Interface) is a two-wire - serial interface between baseband and application processors - and Power Management Integrated Circuits (PMIC). -+ -+if SPMI -+ -+config SPMI_MSM_PMIC_ARB -+ tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)" -+ depends on ARM -+ depends on ARCH_MSM || COMPILE_TEST -+ default ARCH_MSM -+ help -+ If you say yes to this option, support will be included for the -+ built-in SPMI PMIC Arbiter interface on Qualcomm MSM family -+ processors. -+ -+ This is required for communicating with Qualcomm PMICs and -+ other devices that have the SPMI interface. -+ -+endif ---- a/drivers/spmi/Makefile -+++ b/drivers/spmi/Makefile -@@ -2,3 +2,5 @@ - # Makefile for kernel SPMI framework. - # - obj-$(CONFIG_SPMI) += spmi.o -+ -+obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o ---- /dev/null -+++ b/drivers/spmi/spmi-pmic-arb.c -@@ -0,0 +1,405 @@ -+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#include <linux/delay.h> -+#include <linux/err.h> -+#include <linux/interrupt.h> -+#include <linux/io.h> -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/platform_device.h> -+#include <linux/slab.h> -+#include <linux/spmi.h> -+ -+/* PMIC Arbiter configuration registers */ -+#define PMIC_ARB_VERSION 0x0000 -+#define PMIC_ARB_INT_EN 0x0004 -+ -+/* PMIC Arbiter channel registers */ -+#define PMIC_ARB_CMD(N) (0x0800 + (0x80 * (N))) -+#define PMIC_ARB_CONFIG(N) (0x0804 + (0x80 * (N))) -+#define PMIC_ARB_STATUS(N) (0x0808 + (0x80 * (N))) -+#define PMIC_ARB_WDATA0(N) (0x0810 + (0x80 * (N))) -+#define PMIC_ARB_WDATA1(N) (0x0814 + (0x80 * (N))) -+#define PMIC_ARB_RDATA0(N) (0x0818 + (0x80 * (N))) -+#define PMIC_ARB_RDATA1(N) (0x081C + (0x80 * (N))) -+ -+/* Interrupt Controller */ -+#define SPMI_PIC_OWNER_ACC_STATUS(M, N) (0x0000 + ((32 * (M)) + (4 * (N)))) -+#define SPMI_PIC_ACC_ENABLE(N) (0x0200 + (4 * (N))) -+#define SPMI_PIC_IRQ_STATUS(N) (0x0600 + (4 * (N))) -+#define SPMI_PIC_IRQ_CLEAR(N) (0x0A00 + (4 * (N))) -+ -+/* Mapping Table */ -+#define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N))) -+#define SPMI_MAPPING_BIT_INDEX(X) (((X) >> 18) & 0xF) -+#define SPMI_MAPPING_BIT_IS_0_FLAG(X) (((X) >> 17) & 0x1) -+#define SPMI_MAPPING_BIT_IS_0_RESULT(X) (((X) >> 9) & 0xFF) -+#define SPMI_MAPPING_BIT_IS_1_FLAG(X) (((X) >> 8) & 0x1) -+#define SPMI_MAPPING_BIT_IS_1_RESULT(X) (((X) >> 0) & 0xFF) -+ -+#define SPMI_MAPPING_TABLE_LEN 255 -+#define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */ -+ -+/* Ownership Table */ -+#define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N))) -+#define SPMI_OWNERSHIP_PERIPH2OWNER(X) ((X) & 0x7) -+ -+/* Channel Status fields */ -+enum pmic_arb_chnl_status { -+ PMIC_ARB_STATUS_DONE = (1 << 0), -+ PMIC_ARB_STATUS_FAILURE = (1 << 1), -+ PMIC_ARB_STATUS_DENIED = (1 << 2), -+ PMIC_ARB_STATUS_DROPPED = (1 << 3), -+}; -+ -+/* Command register fields */ -+#define PMIC_ARB_CMD_MAX_BYTE_COUNT 8 -+ -+/* Command Opcodes */ -+enum pmic_arb_cmd_op_code { -+ PMIC_ARB_OP_EXT_WRITEL = 0, -+ PMIC_ARB_OP_EXT_READL = 1, -+ PMIC_ARB_OP_EXT_WRITE = 2, -+ PMIC_ARB_OP_RESET = 3, -+ PMIC_ARB_OP_SLEEP = 4, -+ PMIC_ARB_OP_SHUTDOWN = 5, -+ PMIC_ARB_OP_WAKEUP = 6, -+ PMIC_ARB_OP_AUTHENTICATE = 7, -+ PMIC_ARB_OP_MSTR_READ = 8, -+ PMIC_ARB_OP_MSTR_WRITE = 9, -+ PMIC_ARB_OP_EXT_READ = 13, -+ PMIC_ARB_OP_WRITE = 14, -+ PMIC_ARB_OP_READ = 15, -+ PMIC_ARB_OP_ZERO_WRITE = 16, -+}; -+ -+/* Maximum number of support PMIC peripherals */ -+#define PMIC_ARB_MAX_PERIPHS 256 -+#define PMIC_ARB_PERIPH_ID_VALID (1 << 15) -+#define PMIC_ARB_TIMEOUT_US 100 -+#define PMIC_ARB_MAX_TRANS_BYTES (8) -+ -+#define PMIC_ARB_APID_MASK 0xFF -+#define PMIC_ARB_PPID_MASK 0xFFF -+ -+/* interrupt enable bit */ -+#define SPMI_PIC_ACC_ENABLE_BIT BIT(0) -+ -+/** -+ * spmi_pmic_arb_dev - SPMI PMIC Arbiter object -+ * -+ * @base: address of the PMIC Arbiter core registers. -+ * @intr: address of the SPMI interrupt control registers. -+ * @cnfg: address of the PMIC Arbiter configuration registers. -+ * @lock: lock to synchronize accesses. -+ * @channel: which channel to use for accesses. -+ */ -+struct spmi_pmic_arb_dev { -+ void __iomem *base; -+ void __iomem *intr; -+ void __iomem *cnfg; -+ raw_spinlock_t lock; -+ u8 channel; -+}; -+ -+static inline u32 pmic_arb_base_read(struct spmi_pmic_arb_dev *dev, u32 offset) -+{ -+ return readl_relaxed(dev->base + offset); -+} -+ -+static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev, -+ u32 offset, u32 val) -+{ -+ writel_relaxed(val, dev->base + offset); -+} -+ -+/** -+ * pa_read_data: reads pmic-arb's register and copy 1..4 bytes to buf -+ * @bc: byte count -1. range: 0..3 -+ * @reg: register's address -+ * @buf: output parameter, length must be bc + 1 -+ */ -+static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc) -+{ -+ u32 data = pmic_arb_base_read(dev, reg); -+ memcpy(buf, &data, (bc & 3) + 1); -+} -+ -+/** -+ * pa_write_data: write 1..4 bytes from buf to pmic-arb's register -+ * @bc: byte-count -1. range: 0..3. -+ * @reg: register's address. -+ * @buf: buffer to write. length must be bc + 1. -+ */ -+static void -+pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg, u8 bc) -+{ -+ u32 data = 0; -+ memcpy(&data, buf, (bc & 3) + 1); -+ pmic_arb_base_write(dev, reg, data); -+} -+ -+static int pmic_arb_wait_for_done(struct spmi_controller *ctrl) -+{ -+ struct spmi_pmic_arb_dev *dev = spmi_controller_get_drvdata(ctrl); -+ u32 status = 0; -+ u32 timeout = PMIC_ARB_TIMEOUT_US; -+ u32 offset = PMIC_ARB_STATUS(dev->channel); -+ -+ while (timeout--) { -+ status = pmic_arb_base_read(dev, offset); -+ -+ if (status & PMIC_ARB_STATUS_DONE) { -+ if (status & PMIC_ARB_STATUS_DENIED) { -+ dev_err(&ctrl->dev, -+ "%s: transaction denied (0x%x)\n", -+ __func__, status); -+ return -EPERM; -+ } -+ -+ if (status & PMIC_ARB_STATUS_FAILURE) { -+ dev_err(&ctrl->dev, -+ "%s: transaction failed (0x%x)\n", -+ __func__, status); -+ return -EIO; -+ } -+ -+ if (status & PMIC_ARB_STATUS_DROPPED) { -+ dev_err(&ctrl->dev, -+ "%s: transaction dropped (0x%x)\n", -+ __func__, status); -+ return -EIO; -+ } -+ -+ return 0; -+ } -+ udelay(1); -+ } -+ -+ dev_err(&ctrl->dev, -+ "%s: timeout, status 0x%x\n", -+ __func__, status); -+ return -ETIMEDOUT; -+} -+ -+/* Non-data command */ -+static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid) -+{ -+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl); -+ unsigned long flags; -+ u32 cmd; -+ int rc; -+ -+ /* Check for valid non-data command */ -+ if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP) -+ return -EINVAL; -+ -+ cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20); -+ -+ raw_spin_lock_irqsave(&pmic_arb->lock, flags); -+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd); -+ rc = pmic_arb_wait_for_done(ctrl); -+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags); -+ -+ return rc; -+} -+ -+static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, -+ u16 addr, u8 *buf, size_t len) -+{ -+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl); -+ unsigned long flags; -+ u8 bc = len - 1; -+ u32 cmd; -+ int rc; -+ -+ if (bc >= PMIC_ARB_MAX_TRANS_BYTES) { -+ dev_err(&ctrl->dev, -+ "pmic-arb supports 1..%d bytes per trans, but %d requested", -+ PMIC_ARB_MAX_TRANS_BYTES, len); -+ return -EINVAL; -+ } -+ -+ /* Check the opcode */ -+ if (opc >= 0x60 && opc <= 0x7F) -+ opc = PMIC_ARB_OP_READ; -+ else if (opc >= 0x20 && opc <= 0x2F) -+ opc = PMIC_ARB_OP_EXT_READ; -+ else if (opc >= 0x38 && opc <= 0x3F) -+ opc = PMIC_ARB_OP_EXT_READL; -+ else -+ return -EINVAL; -+ -+ cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7); -+ -+ raw_spin_lock_irqsave(&pmic_arb->lock, flags); -+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd); -+ rc = pmic_arb_wait_for_done(ctrl); -+ if (rc) -+ goto done; -+ -+ pa_read_data(pmic_arb, buf, PMIC_ARB_RDATA0(pmic_arb->channel), -+ min_t(u8, bc, 3)); -+ -+ if (bc > 3) -+ pa_read_data(pmic_arb, buf + 4, -+ PMIC_ARB_RDATA1(pmic_arb->channel), bc - 4); -+ -+done: -+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags); -+ return rc; -+} -+ -+static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, -+ u16 addr, const u8 *buf, size_t len) -+{ -+ struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl); -+ unsigned long flags; -+ u8 bc = len - 1; -+ u32 cmd; -+ int rc; -+ -+ if (bc >= PMIC_ARB_MAX_TRANS_BYTES) { -+ dev_err(&ctrl->dev, -+ "pmic-arb supports 1..%d bytes per trans, but:%d requested", -+ PMIC_ARB_MAX_TRANS_BYTES, len); -+ return -EINVAL; -+ } -+ -+ /* Check the opcode */ -+ if (opc >= 0x40 && opc <= 0x5F) -+ opc = PMIC_ARB_OP_WRITE; -+ else if (opc >= 0x00 && opc <= 0x0F) -+ opc = PMIC_ARB_OP_EXT_WRITE; -+ else if (opc >= 0x30 && opc <= 0x37) -+ opc = PMIC_ARB_OP_EXT_WRITEL; -+ else if (opc >= 0x80 && opc <= 0xFF) -+ opc = PMIC_ARB_OP_ZERO_WRITE; -+ else -+ return -EINVAL; -+ -+ cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7); -+ -+ /* Write data to FIFOs */ -+ raw_spin_lock_irqsave(&pmic_arb->lock, flags); -+ pa_write_data(pmic_arb, buf, PMIC_ARB_WDATA0(pmic_arb->channel) -+ , min_t(u8, bc, 3)); -+ if (bc > 3) -+ pa_write_data(pmic_arb, buf + 4, -+ PMIC_ARB_WDATA1(pmic_arb->channel), bc - 4); -+ -+ /* Start the transaction */ -+ pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd); -+ rc = pmic_arb_wait_for_done(ctrl); -+ raw_spin_unlock_irqrestore(&pmic_arb->lock, flags); -+ -+ return rc; -+} -+ -+static int spmi_pmic_arb_probe(struct platform_device *pdev) -+{ -+ struct spmi_pmic_arb_dev *pa; -+ struct spmi_controller *ctrl; -+ struct resource *res; -+ u32 channel; -+ int err, i; -+ -+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*pa)); -+ if (!ctrl) -+ return -ENOMEM; -+ -+ pa = spmi_controller_get_drvdata(ctrl); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core"); -+ pa->base = devm_ioremap_resource(&ctrl->dev, res); -+ if (IS_ERR(pa->base)) { -+ err = PTR_ERR(pa->base); -+ goto err_put_ctrl; -+ } -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr"); -+ pa->intr = devm_ioremap_resource(&ctrl->dev, res); -+ if (IS_ERR(pa->intr)) { -+ err = PTR_ERR(pa->intr); -+ goto err_put_ctrl; -+ } -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cnfg"); -+ pa->cnfg = devm_ioremap_resource(&ctrl->dev, res); -+ if (IS_ERR(pa->cnfg)) { -+ err = PTR_ERR(pa->cnfg); -+ goto err_put_ctrl; -+ } -+ -+ err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel); -+ if (err) { -+ dev_err(&pdev->dev, "channel unspecified.\n"); -+ goto err_put_ctrl; -+ } -+ -+ if (channel > 5) { -+ dev_err(&pdev->dev, "invalid channel (%u) specified.\n", -+ channel); -+ goto err_put_ctrl; -+ } -+ -+ pa->channel = channel; -+ -+ platform_set_drvdata(pdev, ctrl); -+ raw_spin_lock_init(&pa->lock); -+ -+ ctrl->cmd = pmic_arb_cmd; -+ ctrl->read_cmd = pmic_arb_read_cmd; -+ ctrl->write_cmd = pmic_arb_write_cmd; -+ -+ err = spmi_controller_add(ctrl); -+ if (err) -+ goto err_put_ctrl; -+ -+ dev_dbg(&ctrl->dev, "PMIC Arb Version 0x%x\n", -+ pmic_arb_base_read(pa, PMIC_ARB_VERSION)); -+ -+ return 0; -+ -+err_put_ctrl: -+ spmi_controller_put(ctrl); -+ return err; -+} -+ -+static int spmi_pmic_arb_remove(struct platform_device *pdev) -+{ -+ struct spmi_controller *ctrl = platform_get_drvdata(pdev); -+ spmi_controller_remove(ctrl); -+ spmi_controller_put(ctrl); -+ return 0; -+} -+ -+static const struct of_device_id spmi_pmic_arb_match_table[] = { -+ { .compatible = "qcom,spmi-pmic-arb", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table); -+ -+static struct platform_driver spmi_pmic_arb_driver = { -+ .probe = spmi_pmic_arb_probe, -+ .remove = spmi_pmic_arb_remove, -+ .driver = { -+ .name = "spmi_pmic_arb", -+ .owner = THIS_MODULE, -+ .of_match_table = spmi_pmic_arb_match_table, -+ }, -+}; -+module_platform_driver(spmi_pmic_arb_driver); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:spmi_pmic_arb"); |