1 files changed, 0 insertions, 89 deletions
diff --git a/target/linux/ipq806x/patches-5.4/084-ipq8064-v1.0-dtsi-cleanup.patch b/target/linux/ipq806x/patches-5.4/084-ipq8064-v1.0-dtsi-cleanup.patch
deleted file mode 100644
index e5ea8e6393..0000000000
--- a/target/linux/ipq806x/patches-5.4/084-ipq8064-v1.0-dtsi-cleanup.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
-instead of keeping a local version.
-We drop partitions, LEDs and keys from the file as we will implement
-them differently anyway.
-
---- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-@@ -42,16 +42,6 @@
- 					#size-cells = <1>;
- 					spi-max-frequency = <50000000>;
- 					reg = <0>;
--
--					partition@0 {
--						label = "rootfs";
--						reg = <0x0 0x1000000>;
--					};
--
--					partition@1 {
--						label = "scratch";
--						reg = <0x1000000 0x1000000>;
--					};
- 				};
- 			};
- 		};
-@@ -64,64 +54,5 @@
- 			ports-implemented = <0x1>;
- 			status = "ok";
- 		};
--
--		gpio_keys {
--			compatible = "gpio-keys";
--			pinctrl-0 = <&buttons_pins>;
--			pinctrl-names = "default";
--
--			button@1 {
--				label = "reset";
--				linux,code = <KEY_RESTART>;
--				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
--				linux,input-type = <1>;
--				debounce-interval = <60>;
--			};
--			button@2 {
--				label = "wps";
--				linux,code = <KEY_WPS_BUTTON>;
--				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
--				linux,input-type = <1>;
--				debounce-interval = <60>;
--			};
--		};
--
--		leds {
--			compatible = "gpio-leds";
--			pinctrl-0 = <&leds_pins>;
--			pinctrl-names = "default";
--
--			led@7 {
--				label = "led_usb1";
--				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
--				linux,default-trigger = "usbdev";
--				default-state = "off";
--			};
--
--			led@8 {
--				label = "led_usb3";
--				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
--				linux,default-trigger = "usbdev";
--				default-state = "off";
--			};
--
--			led@9 {
--				label = "status_led_fail";
--				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
--				default-state = "off";
--			};
--
--			led@26 {
--				label = "sata_led";
--				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
--				default-state = "off";
--			};
--
--			led@53 {
--				label = "status_led_pass";
--				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
--				default-state = "off";
--			};
--		};
- 	};
- };