aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch')
-rw-r--r--target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch992
1 files changed, 992 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
new file mode 100644
index 0000000000..bd3c972f5c
--- /dev/null
+++ b/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
@@ -0,0 +1,992 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -8,6 +8,8 @@
+ #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+ #include <dt-bindings/soc/qcom,gsbi.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/mfd/qcom-rpm.h>
++#include <dt-bindings/clock/qcom,rpmcc.h>
+
+ / {
+ #address-cells = <1>;
+@@ -28,6 +30,16 @@
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
++ clocks = <&kraitcc 0>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
++ clock-latency = <100000>;
++ cpu-supply = <&smb208_s2a>;
++ operating-points-v2 = <&opp_table0>;
++ voltage-tolerance = <5>;
++ cooling-min-state = <0>;
++ cooling-max-state = <10>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ cpu1: cpu@1 {
+@@ -38,11 +50,458 @@
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
++ clocks = <&kraitcc 1>, <&kraitcc 4>;
++ clock-names = "cpu", "l2";
++ clock-latency = <100000>;
++ cpu-supply = <&smb208_s2b>;
++ operating-points-v2 = <&opp_table0>;
++ voltage-tolerance = <5>;
++ cooling-min-state = <0>;
++ cooling-max-state = <10>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
++ };
++
++ qcom,l2 {
++ qcom,l2-rates = <384000000 1000000000 1200000000>;
++ qcom,l2-cpufreq = <384000000 600000000 1200000000>;
++ qcom,l2-volt = <1100000 1100000 1150000>;
++ qcom,l2-supply = <&smb208_s1a>;
++ };
++
++ idle-states {
++ CPU_SPC: spc {
++ compatible = "qcom,idle-state-spc", "arm,idle-state";
++ status = "disabled";
++ entry-latency-us = <400>;
++ exit-latency-us = <900>;
++ min-residency-us = <3000>;
++ };
++ };
++ };
++
++ opp_table0: opp_table0 {
++ compatible = "operating-points-v2-qcom-cpu";
++ nvmem-cells = <&speedbin_efuse>;
++
++ opp-384000000 {
++ opp-hz = /bits/ 64 <384000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1000000>;
++ opp-microvolt-speed0-pvs1-v0 = <925000>;
++ opp-microvolt-speed0-pvs2-v0 = <875000>;
++ opp-microvolt-speed0-pvs3-v0 = <800000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ };
++
++ opp-600000000 {
++ opp-hz = /bits/ 64 <600000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1050000>;
++ opp-microvolt-speed0-pvs1-v0 = <975000>;
++ opp-microvolt-speed0-pvs2-v0 = <925000>;
++ opp-microvolt-speed0-pvs3-v0 = <850000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ };
++
++ opp-800000000 {
++ opp-hz = /bits/ 64 <800000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1100000>;
++ opp-microvolt-speed0-pvs1-v0 = <1025000>;
++ opp-microvolt-speed0-pvs2-v0 = <995000>;
++ opp-microvolt-speed0-pvs3-v0 = <900000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ };
++
++ opp-1000000000 {
++ opp-hz = /bits/ 64 <1000000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1150000>;
++ opp-microvolt-speed0-pvs1-v0 = <1075000>;
++ opp-microvolt-speed0-pvs2-v0 = <1025000>;
++ opp-microvolt-speed0-pvs3-v0 = <950000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ };
++
++ opp-1200000000 {
++ opp-hz = /bits/ 64 <1200000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1200000>;
++ opp-microvolt-speed0-pvs1-v0 = <1125000>;
++ opp-microvolt-speed0-pvs2-v0 = <1075000>;
++ opp-microvolt-speed0-pvs3-v0 = <1000000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ };
++
++ opp-1400000000 {
++ opp-hz = /bits/ 64 <1400000000>;
++ opp-microvolt-speed0-pvs0-v0 = <1250000>;
++ opp-microvolt-speed0-pvs1-v0 = <1175000>;
++ opp-microvolt-speed0-pvs2-v0 = <1125000>;
++ opp-microvolt-speed0-pvs3-v0 = <1050000>;
++ opp-supported-hw = <0x1>;
++ clock-latency-ns = <100000>;
++ };
++ };
++
++ thermal-zones {
++ tsens_tz_sensor0 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 0>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor1 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 1>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor2 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 2>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor3 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 3>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor4 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 4>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor5 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 5>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor6 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 6>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor7 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 7>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor8 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 8>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor9 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 9>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
++ };
++
++ tsens_tz_sensor10 {
++ polling-delay-passive = <0>;
++ polling-delay = <0>;
++ thermal-sensors = <&tsens 10>;
++
++ trips {
++ cpu-critical-hi {
++ temperature = <125000>;
++ hysteresis = <2000>;
++ type = "critical_high";
++ };
++
++ cpu-config-hi {
++ temperature = <105000>;
++ hysteresis = <2000>;
++ type = "configurable_hi";
++ };
++
++ cpu-config-lo {
++ temperature = <95000>;
++ hysteresis = <2000>;
++ type = "configurable_lo";
++ };
++
++ cpu-critical-low {
++ temperature = <0>;
++ hysteresis = <2000>;
++ type = "critical_low";
++ };
++ };
+ };
+ };
+
+@@ -93,6 +552,15 @@
+ };
+ };
+
++ fab-scaling {
++ compatible = "qcom,fab-scaling";
++ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
++ clock-names = "apps-fab-clk", "ddr-fab-clk";
++ fab_freq_high = <533000000>;
++ fab_freq_nominal = <400000000>;
++ cpu_freq_threshold = <1000000000>;
++ };
++
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq806x", "qcom,scm";
+@@ -120,6 +588,84 @@
+ reg-names = "lpass-lpaif";
+ };
+
++ qfprom: qfprom@700000 {
++ compatible = "qcom,qfprom", "syscon";
++ reg = <0x700000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ status = "okay";
++ tsens_calib: calib@400 {
++ reg = <0x400 0xb>;
++ };
++ tsens_backup: backup@410 {
++ reg = <0x410 0xb>;
++ };
++ speedbin_efuse: speedbin@0c0 {
++ reg = <0x0c0 0x4>;
++ };
++ };
++
++ rpm: rpm@108000 {
++ compatible = "qcom,rpm-ipq8064";
++ reg = <0x108000 0x1000>;
++ qcom,ipc = <&l2cc 0x8 2>;
++
++ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "ack", "err", "wakeup";
++
++ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
++ clock-names = "ram";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ rpmcc: clock-controller {
++ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
++ #clock-cells = <1>;
++ };
++
++ regulators {
++ compatible = "qcom,rpm-smb208-regulators";
++
++ smb208_s1a: s1a {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s1b: s1b {
++ regulator-min-microvolt = <1050000>;
++ regulator-max-microvolt = <1150000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2a: s2a {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++
++ smb208_s2b: s2b {
++ regulator-min-microvolt = < 800000>;
++ regulator-max-microvolt = <1250000>;
++
++ qcom,switch-mode-frequency = <1200000>;
++ };
++ };
++ };
++
++ rng@1a500000 {
++ compatible = "qcom,prng";
++ reg = <0x1a500000 0x200>;
++ clocks = <&gcc PRNG_CLK>;
++ clock-names = "core";
++ };
++
+ qcom_pinmux: pinmux@800000 {
+ compatible = "qcom,ipq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+@@ -159,6 +705,15 @@
+ };
+ };
+
++ i2c4_pins: i2c4_pinmux {
++ mux {
++ pins = "gpio12", "gpio13";
++ function = "gsbi4";
++ drive-strength = <12>;
++ bias-disable;
++ };
++ };
++
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+@@ -168,6 +723,53 @@
+ };
+ };
+
++ nand_pins: nand_pins {
++ disable {
++ pins = "gpio34", "gpio35", "gpio36",
++ "gpio37", "gpio38";
++ function = "nand";
++ drive-strength = <10>;
++ bias-disable;
++ };
++
++ pullups {
++ pins = "gpio39";
++ function = "nand";
++ drive-strength = <10>;
++ bias-pull-up;
++ };
++
++ hold {
++ pins = "gpio40", "gpio41", "gpio42",
++ "gpio43", "gpio44", "gpio45",
++ "gpio46", "gpio47";
++ function = "nand";
++ drive-strength = <10>;
++ bias-bus-hold;
++ };
++ };
++
++ mdio0_pins: mdio0_pins {
++ mux {
++ pins = "gpio0", "gpio1";
++ function = "mdio";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++
++ rgmii2_pins: rgmii2_pins {
++ mux {
++ pins = "gpio27", "gpio28", "gpio29",
++ "gpio30", "gpio31", "gpio32",
++ "gpio51", "gpio52", "gpio59",
++ "gpio60", "gpio61", "gpio62";
++ function = "rgmii2";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++
+ leds_pins: leds_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9",
+@@ -229,6 +831,17 @@
+ clock-output-names = "acpu1_aux";
+ };
+
++ l2cc: clock-controller@2011000 {
++ compatible = "qcom,kpss-gcc", "syscon";
++ reg = <0x2011000 0x1000>;
++ clock-output-names = "acpu_l2_aux";
++ };
++
++ kraitcc: clock-controller {
++ compatible = "qcom,krait-cc-v1";
++ #clock-cells = <1>;
++ };
++
+ saw0: regulator@2089000 {
+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+@@ -241,6 +854,17 @@
+ regulator;
+ };
+
++ saw_l2: regulator@02012000 {
++ compatible = "qcom,saw2", "syscon";
++ reg = <0x02012000 0x1000>;
++ regulator;
++ };
++
++ sic_non_secure: sic-non-secure@12100000 {
++ compatible = "syscon";
++ reg = <0x12100000 0x10000>;
++ };
++
+ gsbi2: gsbi@12480000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
+@@ -436,6 +1060,15 @@
+ #power-domain-cells = <1>;
+ };
+
++ tsens: thermal-sensor@900000 {
++ compatible = "qcom,ipq8064-tsens";
++ reg = <0x900000 0x3680>;
++ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
++ nvmem-cell-names = "calib", "calib_backup";
++ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
++ #thermal-sensor-cells = <1>;
++ };
++
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+@@ -448,6 +1081,95 @@
+ #reset-cells = <1>;
+ };
+
++ sfpb_mutex_block: syscon@1200600 {
++ compatible = "syscon";
++ reg = <0x01200600 0x100>;
++ };
++
++ hs_phy_0: hs_phy_0 {
++ compatible = "qcom,dwc3-hs-usb-phy";
++ regmap = <&usb3_0>;
++ clocks = <&gcc USB30_0_UTMI_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
++ };
++
++ ss_phy_0: ss_phy_0 {
++ compatible = "qcom,dwc3-ss-usb-phy";
++ regmap = <&usb3_0>;
++ clocks = <&gcc USB30_0_MASTER_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
++ };
++
++ usb3_0: usb3@110f8800 {
++ compatible = "qcom,dwc3", "syscon";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0x110f8800 0x8000>;
++ clocks = <&gcc USB30_0_MASTER_CLK>;
++ clock-names = "core";
++
++ ranges;
++
++ resets = <&gcc USB30_0_MASTER_RESET>;
++ reset-names = "master";
++
++ status = "disabled";
++
++ dwc3_0: dwc3@11000000 {
++ compatible = "snps,dwc3";
++ reg = <0x11000000 0xcd00>;
++ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&hs_phy_0>, <&ss_phy_0>;
++ phy-names = "usb2-phy", "usb3-phy";
++ dr_mode = "host";
++ snps,dis_u3_susphy_quirk;
++ };
++ };
++
++ hs_phy_1: hs_phy_1 {
++ compatible = "qcom,dwc3-hs-usb-phy";
++ regmap = <&usb3_1>;
++ clocks = <&gcc USB30_1_UTMI_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
++ };
++
++ ss_phy_1: ss_phy_1 {
++ compatible = "qcom,dwc3-ss-usb-phy";
++ regmap = <&usb3_1>;
++ clocks = <&gcc USB30_1_MASTER_CLK>;
++ clock-names = "ref";
++ #phy-cells = <0>;
++ };
++
++ usb3_1: usb3@100f8800 {
++ compatible = "qcom,dwc3", "syscon";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0x100f8800 0x8000>;
++ clocks = <&gcc USB30_1_MASTER_CLK>;
++ clock-names = "core";
++
++ ranges;
++
++ resets = <&gcc USB30_1_MASTER_RESET>;
++ reset-names = "master";
++
++ status = "disabled";
++
++ dwc3_1: dwc3@10000000 {
++ compatible = "snps,dwc3";
++ reg = <0x10000000 0xcd00>;
++ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&hs_phy_1>, <&ss_phy_1>;
++ phy-names = "usb2-phy", "usb3-phy";
++ dr_mode = "host";
++ snps,dis_u3_susphy_quirk;
++ };
++ };
++
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b500000 0x1000
+@@ -601,6 +1323,167 @@
+ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+ };
+
++ adm_dma: dma@18300000 {
++ compatible = "qcom,adm";
++ reg = <0x18300000 0x100000>;
++ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
++ #dma-cells = <1>;
++
++ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
++ clock-names = "core", "iface";
++
++ resets = <&gcc ADM0_RESET>,
++ <&gcc ADM0_PBUS_RESET>,
++ <&gcc ADM0_C0_RESET>,
++ <&gcc ADM0_C1_RESET>,
++ <&gcc ADM0_C2_RESET>;
++ reset-names = "clk", "pbus", "c0", "c1", "c2";
++ qcom,ee = <0>;
++
++ status = "disabled";
++ };
++
++ nand_controller: nand-controller@1ac00000 {
++ compatible = "qcom,ipq806x-nand";
++ reg = <0x1ac00000 0x800>;
++
++ clocks = <&gcc EBI2_CLK>,
++ <&gcc EBI2_AON_CLK>;
++ clock-names = "core", "aon";
++
++ dmas = <&adm_dma 3>;
++ dma-names = "rxtx";
++ qcom,cmd-crci = <15>;
++ qcom,data-crci = <3>;
++
++ status = "disabled";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ nss_common: syscon@03000000 {
++ compatible = "syscon";
++ reg = <0x03000000 0x0000FFFF>;
++ };
++
++ qsgmii_csr: syscon@1bb00000 {
++ compatible = "syscon";
++ reg = <0x1bb00000 0x000001FF>;
++ };
++
++ stmmac_axi_setup: stmmac-axi-config {
++ snps,wr_osr_lmt = <7>;
++ snps,rd_osr_lmt = <7>;
++ snps,blen = <16 0 0 0 0 0 0>;
++ };
++
++ mdio0: mdio@37000000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ compatible = "qcom,ipq8064-mdio", "syscon";
++ reg = <0x37000000 0x200000>;
++ resets = <&gcc GMAC_CORE1_RESET>;
++ reset-names = "stmmaceth";
++ clocks = <&gcc GMAC_CORE1_CLK>;
++ clock-names = "stmmaceth";
++
++ status = "disabled";
++ };
++
++ gmac0: ethernet@37000000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac";
++ reg = <0x37000000 0x200000>;
++ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
++
++ snps,axi-config = <&stmmac_axi_setup>;
++ snps,pbl = <32>;
++ snps,aal = <1>;
++
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
++
++ clocks = <&gcc GMAC_CORE1_CLK>;
++ clock-names = "stmmaceth";
++
++ resets = <&gcc GMAC_CORE1_RESET>;
++ reset-names = "stmmaceth";
++
++ status = "disabled";
++ };
++
++ gmac1: ethernet@37200000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac";
++ reg = <0x37200000 0x200000>;
++ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
++
++ snps,axi-config = <&stmmac_axi_setup>;
++ snps,pbl = <32>;
++ snps,aal = <1>;
++
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
++
++ clocks = <&gcc GMAC_CORE2_CLK>;
++ clock-names = "stmmaceth";
++
++ resets = <&gcc GMAC_CORE2_RESET>;
++ reset-names = "stmmaceth";
++
++ status = "disabled";
++ };
++
++ gmac2: ethernet@37400000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
++ reg = <0x37400000 0x200000>;
++ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
++
++ snps,axi-config = <&stmmac_axi_setup>;
++ snps,pbl = <32>;
++ snps,aal = <1>;
++
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
++
++ clocks = <&gcc GMAC_CORE3_CLK>;
++ clock-names = "stmmaceth";
++
++ resets = <&gcc GMAC_CORE3_RESET>;
++ reset-names = "stmmaceth";
++
++ status = "disabled";
++ };
++
++ gmac3: ethernet@37600000 {
++ device_type = "network";
++ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
++ reg = <0x37600000 0x200000>;
++ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "macirq";
++
++ snps,axi-config = <&stmmac_axi_setup>;
++ snps,pbl = <32>;
++ snps,aal = <1>;
++
++ qcom,nss-common = <&nss_common>;
++ qcom,qsgmii-csr = <&qsgmii_csr>;
++
++ clocks = <&gcc GMAC_CORE4_CLK>;
++ clock-names = "stmmaceth";
++
++ resets = <&gcc GMAC_CORE4_RESET>;
++ reset-names = "stmmaceth";
++
++ status = "disabled";
++ };
++
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+@@ -676,4 +1559,17 @@
+ };
+ };
+ };
++
++ sfpb_mutex: sfpb-mutex {
++ compatible = "qcom,sfpb-mutex";
++ syscon = <&sfpb_mutex_block 4 4>;
++
++ #hwlock-cells = <1>;
++ };
++
++ smem {
++ compatible = "qcom,smem";
++ memory-region = <&smem>;
++ hwlocks = <&sfpb_mutex 3>;
++ };
+ };
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 03:51:35 +0000