diff options
Diffstat (limited to 'target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch b/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch deleted file mode 100644 index 36be35fce1..0000000000 --- a/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch +++ /dev/null @@ -1,240 +0,0 @@ ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -352,6 +352,7 @@ - gpio-ranges = <&qcom_pinmux 0 0 69>; - #gpio-cells = <2>; - interrupt-controller; -+ #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - -@@ -379,6 +380,7 @@ - function = "pcie3_rst"; - drive-strength = <12>; - bias-disable; -+ output-low; - }; - }; - -@@ -411,12 +413,9 @@ - }; - - nand_pins: nand_pins { -- mux { -+ disable { - pins = "gpio34", "gpio35", "gpio36", -- "gpio37", "gpio38", "gpio39", -- "gpio40", "gpio41", "gpio42", -- "gpio43", "gpio44", "gpio45", -- "gpio46", "gpio47"; -+ "gpio37", "gpio38"; - function = "nand"; - drive-strength = <10>; - bias-disable; -@@ -424,6 +423,8 @@ - - pullups { - pins = "gpio39"; -+ function = "nand"; -+ drive-strength = <10>; - bias-pull-up; - }; - -@@ -431,6 +432,8 @@ - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; - bias-bus-hold; - }; - }; -@@ -439,6 +442,7 @@ - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; -+ #address-cells = <0>; - #interrupt-cells = <3>; - reg = <0x02000000 0x1000>, - <0x02002000 0x1000>; -@@ -468,11 +472,13 @@ - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; -+ clock-output-names = "acpu0_aux"; - }; - - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; -+ clock-output-names = "acpu1_aux"; - }; - - adm_dma: dma-controller@18300000 { -@@ -496,13 +502,13 @@ - }; - - saw0: regulator@2089000 { -- compatible = "qcom,saw2"; -+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - - saw1: regulator@2099000 { -- compatible = "qcom,saw2"; -+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; -@@ -530,7 +536,7 @@ - status = "disabled"; - }; - -- i2c@124a0000 { -+ gsbi2_i2c: i2c@124a0000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x124a0000 0x1000>; - interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; -@@ -676,9 +682,6 @@ - compatible = "qcom,ipq806x-nand"; - reg = <0x1ac00000 0x800>; - -- pinctrl-0 = <&nand_pins>; -- pinctrl-names = "default"; -- - clocks = <&gcc EBI2_CLK>, - <&gcc EBI2_AON_CLK>; - clock-names = "core", "aon"; -@@ -733,10 +736,13 @@ - tsens_calib_backup: calib_backup@410 { - reg = <0x410 0xb>; - }; -+ speedbin_efuse: speedbin@0c0 { -+ reg = <0x0c0 0x4>; -+ }; - }; - - gcc: clock-controller@900000 { -- compatible = "qcom,gcc-ipq8064"; -+ compatible = "qcom,gcc-ipq8064", "syscon"; - reg = <0x00900000 0x4000>; - #clock-cells = <1>; - #reset-cells = <1>; -@@ -768,10 +774,45 @@ - clocks = <&gcc RPM_MSG_RAM_H_CLK>; - clock-names = "ram"; - -+ #address-cells = <1>; -+ #size-cells = <0>; -+ - rpmcc: clock-controller { - compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; - #clock-cells = <1>; - }; -+ -+ regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; - }; - - tcsr: syscon@1a400000 { -@@ -965,7 +1006,7 @@ - - gmac0: ethernet@37000000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37000000 0x200000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; -@@ -989,7 +1030,7 @@ - - gmac1: ethernet@37200000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37200000 0x200000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; -@@ -1013,7 +1054,7 @@ - - gmac2: ethernet@37400000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37400000 0x200000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; -@@ -1037,7 +1078,7 @@ - - gmac3: ethernet@37600000 { - device_type = "network"; -- compatible = "qcom,ipq806x-gmac"; -+ compatible = "qcom,ipq806x-gmac", "snps,dwmac"; - reg = <0x37600000 0x200000>; - interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; -@@ -1065,8 +1106,6 @@ - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; -- -- status = "disabled"; - }; - - ss_phy_0: phy@100f8830 { -@@ -1075,8 +1114,6 @@ - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; -- -- status = "disabled"; - }; - - usb3_0: usb3@100f8800 { -@@ -1176,7 +1213,7 @@ - }; - - amba: amba { -- compatible = "simple-bus"; -+ compatible = "arm,amba-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; -@@ -1195,7 +1232,6 @@ - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; -- mmc-ddr-1_8v; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; |