aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-4.9
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-4.9')
-rw-r--r--target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch87
1 files changed, 58 insertions, 29 deletions
diff --git a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
index 230afd293c..bd777858e0 100644
--- a/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
+++ b/target/linux/ipq806x/patches-4.9/0032-phy-add-qcom-dwc3-phy.patch
@@ -7,8 +7,8 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
---
drivers/phy/Kconfig | 12 +
drivers/phy/Makefile | 1 +
- drivers/phy/phy-qcom-dwc3.c | 546 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 559 insertions(+)
+ drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 588 insertions(+)
create mode 100644 drivers/phy/phy-qcom-dwc3.c
--- a/drivers/phy/Kconfig
@@ -39,7 +39,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
--- /dev/null
+++ b/drivers/phy/phy-qcom-dwc3.c
-@@ -0,0 +1,546 @@
+@@ -0,0 +1,575 @@
+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
@@ -299,36 +299,21 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+ return ret;
+}
+
-+static int qcom_dwc3_phy_power_on(struct phy *phy)
++static int qcom_dwc3_hs_phy_init(struct phy *phy)
+{
-+ int ret;
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++ int ret;
++ u32 val;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret)
++ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return ret;
-+}
-+
-+static int qcom_dwc3_phy_power_off(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_hs_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ u32 val;
++ return ret;
++ }
+
+ /*
+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
@@ -353,12 +338,32 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+ return 0;
+}
+
++static int qcom_dwc3_hs_phy_exit(struct phy *phy)
++{
++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
++
++ clk_disable_unprepare(phy_dwc3->ref_clk);
++ clk_disable_unprepare(phy_dwc3->xo_clk);
++
++ return 0;
++}
++
+static int qcom_dwc3_ss_phy_init(struct phy *phy)
+{
+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 data = 0;
+
++ ret = clk_prepare_enable(phy_dwc3->xo_clk);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(phy_dwc3->ref_clk);
++ if (ret) {
++ clk_disable_unprepare(phy_dwc3->xo_clk);
++ return ret;
++ }
++
+ /* reset phy */
+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
@@ -381,6 +386,30 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /*
++ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
++ * in HS mode instead of SS mode. Workaround it by asserting
++ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
++ */
++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
++ if (ret)
++ goto err_phy_trans;
++
++ data |= (1 << 7);
++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
++ if (ret)
++ goto err_phy_trans;
++
++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
++ if (ret)
++ goto err_phy_trans;
++
++ data &= ~0xff0;
++ data |= 0x20;
++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
++ if (ret)
++ goto err_phy_trans;
++
++ /*
+ * Fix RX Equalization setting as follows
+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
@@ -462,7 +491,10 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_REF_USE_PAD, 0x0);
+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ 0x0, SSUSB_CTRL_TEST_POWERDOWN);
++ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
++
++ clk_disable_unprepare(phy_dwc3->ref_clk);
++ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
@@ -470,8 +502,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
+ .ops = {
+ .init = qcom_dwc3_hs_phy_init,
-+ .power_on = qcom_dwc3_phy_power_on,
-+ .power_off = qcom_dwc3_phy_power_off,
++ .exit = qcom_dwc3_hs_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 60000000,
@@ -481,8 +512,6 @@ Signed-off-by: Andy Gross <agross@codeaurora.org>
+ .ops = {
+ .init = qcom_dwc3_ss_phy_init,
+ .exit = qcom_dwc3_ss_phy_exit,
-+ .power_on = qcom_dwc3_phy_power_on,
-+ .power_off = qcom_dwc3_phy_power_off,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 125000000,