diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.9/999-dts.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-4.9/999-dts.patch | 4069 |
1 files changed, 9 insertions, 4060 deletions
diff --git a/target/linux/ipq806x/patches-4.9/999-dts.patch b/target/linux/ipq806x/patches-4.9/999-dts.patch index abbaad593f..ff970ea0ec 100644 --- a/target/linux/ipq806x/patches-4.9/999-dts.patch +++ b/target/linux/ipq806x/patches-4.9/999-dts.patch @@ -1,58 +1,8 @@ --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -573,92 +573,61 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ - omap4-var-stk-om44.dtb - dtb-$(CONFIG_SOC_AM43XX) += \ - am43x-epos-evm.dtb \ -- am437x-cm-t43.dtb \ -- am437x-gp-evm.dtb \ -+ am437x-sk-evm.dtb \ - am437x-idk-evm.dtb \ -- am437x-sbc-t43.dtb \ -- am437x-sk-evm.dtb -+ am437x-gp-evm.dtb - dtb-$(CONFIG_SOC_OMAP5) += \ - omap5-cm-t54.dtb \ - omap5-igep0050.dtb \ - omap5-sbc-t54.dtb \ - omap5-uevm.dtb - dtb-$(CONFIG_SOC_DRA7XX) += \ -- am57xx-beagle-x15.dtb \ -- am57xx-beagle-x15-revb1.dtb \ -- am57xx-cl-som-am57x.dtb \ -- am57xx-sbc-am57x.dtb \ -- am572x-idk.dtb \ - dra7-evm.dtb \ -- dra72-evm.dtb \ -- dra72-evm-revc.dtb -+ am57xx-beagle-x15.dtb \ -+ dra72-evm.dtb - dtb-$(CONFIG_ARCH_ORION5X) += \ -- orion5x-kuroboxpro.dtb \ - orion5x-lacie-d2-network.dtb \ - orion5x-lacie-ethernet-disk-mini-v2.dtb \ -- orion5x-linkstation-lsgl.dtb \ - orion5x-linkstation-lswtgl.dtb \ - orion5x-lswsgl.dtb \ - orion5x-maxtor-shared-storage-2.dtb \ -- orion5x-netgear-wnr854t.dtb \ - orion5x-rd88f5182-nas.dtb - dtb-$(CONFIG_ARCH_PRIMA2) += \ - prima2-evb.dtb --dtb-$(CONFIG_ARCH_OXNAS) += \ -- wd-mbwe.dtb - dtb-$(CONFIG_ARCH_QCOM) += \ -- qcom-apq8060-dragonboard.dtb \ -- qcom-apq8064-arrow-sd-600eval.dtb \ - qcom-apq8064-cm-qs600.dtb \ - qcom-apq8064-ifc6410.dtb \ -- qcom-apq8064-sony-xperia-yuga.dtb \ -- qcom-apq8064-asus-nexus7-flo.dtb \ - qcom-apq8074-dragonboard.dtb \ - qcom-apq8084-ifc6540.dtb \ - qcom-apq8084-mtp.dtb \ -- qcom-ipq4019-ap.dk01.1-c1.dtb \ -- qcom-ipq4019-ap.dk04.1-c1.dtb \ +@@ -619,6 +619,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-ipq4019-ap.dk01.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c1.dtb \ qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-d7800.dtb \ @@ -64,83 +14,10 @@ + qcom-ipq8065-r7800.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ -- qcom-msm8974-lge-nexus5-hammerhead.dtb \ - qcom-msm8974-sony-xperia-honami.dtb - dtb-$(CONFIG_ARCH_REALVIEW) += \ -- arm-realview-pb1176.dtb \ -- arm-realview-pb11mp.dtb \ -- arm-realview-eb.dtb \ -- arm-realview-eb-bbrevd.dtb \ -- arm-realview-eb-11mp.dtb \ -- arm-realview-eb-11mp-bbrevd.dtb \ -- arm-realview-eb-11mp-ctrevb.dtb \ -- arm-realview-eb-11mp-bbrevd-ctrevb.dtb \ -- arm-realview-eb-a9mp.dtb \ -- arm-realview-eb-a9mp-bbrevd.dtb \ -- arm-realview-pba8.dtb \ -- arm-realview-pbx-a9.dtb -+ arm-realview-pb1176.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += \ -- rk3036-evb.dtb \ -- rk3036-kylin.dtb \ - rk3066a-bqcurie2.dtb \ - rk3066a-marsboard.dtb \ - rk3066a-rayeager.dtb \ - rk3188-radxarock.dtb \ -- rk3228-evb.dtb \ -- rk3229-evb.dtb \ - rk3288-evb-act8846.dtb \ - rk3288-evb-rk808.dtb \ -- rk3288-fennec.dtb \ - rk3288-firefly-beta.dtb \ - rk3288-firefly.dtb \ -- rk3288-firefly-reload.dtb \ -- rk3288-miqi.dtb \ - rk3288-popmetal.dtb \ - rk3288-r89.dtb \ - rk3288-rock2-square.dtb \ -- rk3288-veyron-brain.dtb \ - rk3288-veyron-jaq.dtb \ - rk3288-veyron-jerry.dtb \ -- rk3288-veyron-mickey.dtb \ - rk3288-veyron-minnie.dtb \ - rk3288-veyron-pinky.dtb \ - rk3288-veyron-speedy.dtb + qcom-msm8974-lge-nexus5-hammerhead.dtb \ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -4,12 +4,9 @@ - model = "Qualcomm IPQ8064/AP148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - -- aliases { -- serial0 = &gsbi4_serial; -- }; -- -- chosen { -- stdout-path = "serial0:115200n8"; -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; - }; - - reserved-memory { -@@ -22,6 +19,15 @@ - }; - }; - -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ }; -+ -+ chosen { -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ - soc { - pinmux@800000 { - i2c4_pins: i2c4_pinmux { -@@ -60,6 +66,25 @@ +@@ -60,6 +60,25 @@ bias-bus-hold; }; }; @@ -166,7 +43,7 @@ }; gsbi@16300000 { -@@ -69,14 +94,12 @@ +@@ -69,14 +88,12 @@ status = "ok"; }; @@ -187,7 +64,7 @@ }; gsbi5: gsbi@1a200000 { -@@ -99,15 +122,7 @@ +@@ -99,15 +116,7 @@ spi-max-frequency = <50000000>; reg = <0>; @@ -204,11 +81,7 @@ }; }; }; -@@ -117,23 +132,105 @@ - }; - - sata@29000000 { -- ports-implemented = <0x1>; +@@ -121,19 +130,102 @@ status = "ok"; }; @@ -316,1158 +189,6 @@ }; }; }; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts -@@ -0,0 +1,501 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "TP-Link Archer C2600"; -+ compatible = "tplink,c2600", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power; -+ led-failsafe = &general; -+ led-running = &power; -+ led-upgrade = &general; -+ }; -+ -+ chosen { -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio16", "gpio54", "gpio65"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ mux { -+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", -+ "gpio53", "gpio66"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ spi_pins: spi_pins { -+ mux { -+ pins = "gpio18", "gpio19", "gpio21"; -+ function = "gsbi5"; -+ bias-pull-down; -+ }; -+ -+ data { -+ pins = "gpio18", "gpio19"; -+ drive-strength = <10>; -+ }; -+ -+ cs { -+ pins = "gpio20"; -+ function = "gpio"; -+ drive-strength = <10>; -+ bias-pull-up; -+ }; -+ -+ clk { -+ pins = "gpio21"; -+ drive-strength = <12>; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ usb0_pwr_en_pin: usb0_pwr_en_pin { -+ mux { -+ pins = "gpio25"; -+ function = "gpio"; -+ drive-strength = <10>; -+ bias-pull-up; -+ output-high; -+ }; -+ }; -+ -+ usb1_pwr_en_pin: usb1_pwr_en_pin { -+ mux { -+ pins = "gpio23"; -+ function = "gpio"; -+ drive-strength = <10>; -+ bias-pull-up; -+ output-high; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ gsbi5: gsbi@1a200000 { -+ qcom,mode = <GSBI_PROT_SPI>; -+ status = "ok"; -+ -+ spi5: spi@1a280000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&spi_pins>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; -+ -+ flash: m25p80@0 { -+ compatible = "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <50000000>; -+ reg = <0>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0 0x20000>; -+ read-only; -+ }; -+ -+ MIBIB@20000 { -+ label = "MIBIB"; -+ reg = <0x20000 0x20000>; -+ read-only; -+ }; -+ -+ SBL2@40000 { -+ label = "SBL2"; -+ reg = <0x40000 0x20000>; -+ read-only; -+ }; -+ -+ SBL3@60000 { -+ label = "SBL3"; -+ reg = <0x60000 0x30000>; -+ read-only; -+ }; -+ -+ DDRCONFIG@90000 { -+ label = "DDRCONFIG"; -+ reg = <0x90000 0x10000>; -+ read-only; -+ }; -+ -+ SSD@a0000 { -+ label = "SSD"; -+ reg = <0xa0000 0x10000>; -+ read-only; -+ }; -+ -+ TZ@b0000 { -+ label = "TZ"; -+ reg = <0xb0000 0x30000>; -+ read-only; -+ }; -+ -+ RPM@e0000 { -+ label = "RPM"; -+ reg = <0xe0000 0x20000>; -+ read-only; -+ }; -+ -+ fs-uboot@100000 { -+ label = "fs-uboot"; -+ reg = <0x100000 0x70000>; -+ read-only; -+ }; -+ -+ uboot-env@170000 { -+ label = "uboot-env"; -+ reg = <0x170000 0x40000>; -+ read-only; -+ }; -+ -+ radio@1b0000 { -+ label = "radio"; -+ reg = <0x1b0000 0x40000>; -+ read-only; -+ }; -+ -+ os-image@1f0000 { -+ label = "os-image"; -+ reg = <0x1f0000 0x200000>; -+ }; -+ -+ rootfs@3f0000 { -+ label = "rootfs"; -+ reg = <0x3f0000 0x1b00000>; -+ }; -+ -+ defaultmac: default-mac@1ef0000 { -+ label = "default-mac"; -+ reg = <0x1ef0000 0x00200>; -+ read-only; -+ }; -+ -+ pin@1ef0200 { -+ label = "pin"; -+ reg = <0x1ef0200 0x00200>; -+ read-only; -+ }; -+ -+ product-info@1ef0400 { -+ label = "product-info"; -+ reg = <0x1ef0400 0x0fc00>; -+ read-only; -+ }; -+ -+ partition-table@1f00000 { -+ label = "partition-table"; -+ reg = <0x1f00000 0x10000>; -+ read-only; -+ }; -+ -+ soft-version@1f10000 { -+ label = "soft-version"; -+ reg = <0x1f10000 0x10000>; -+ read-only; -+ }; -+ -+ support-list@1f20000 { -+ label = "support-list"; -+ reg = <0x1f20000 0x10000>; -+ read-only; -+ }; -+ -+ profile@1f30000 { -+ label = "profile"; -+ reg = <0x1f30000 0x10000>; -+ read-only; -+ }; -+ -+ default-config@1f40000 { -+ label = "default-config"; -+ reg = <0x1f40000 0x10000>; -+ read-only; -+ }; -+ -+ user-config@1f50000 { -+ label = "user-config"; -+ reg = <0x1f50000 0x40000>; -+ read-only; -+ }; -+ -+ qos-db@1f90000 { -+ label = "qos-db"; -+ reg = <0x1f90000 0x40000>; -+ read-only; -+ }; -+ -+ usb-config@1fd0000 { -+ label = "usb-config"; -+ reg = <0x1fd0000 0x10000>; -+ read-only; -+ }; -+ -+ log@1fe0000 { -+ label = "log"; -+ reg = <0x1fe0000 0x20000>; -+ read-only; -+ }; -+ }; -+ }; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb0_pwr_en_pin>; -+ pinctrl-names = "default"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb1_pwr_en_pin>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ mtd-mac-address = <&defaultmac 0x8>; -+ mtd-mac-address-increment = <1>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ -+ mtd-mac-address = <&defaultmac 0x8>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ -+ ledswitch { -+ label = "ledswitch"; -+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_LIGHTS_TOGGLE>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ lan { -+ label = "c2600:white:lan"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb4 { -+ label = "c2600:white:usb_4"; -+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb2 { -+ label = "c2600:white:usb_2"; -+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wps { -+ label = "c2600:white:wps"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_amber { -+ label = "c2600:amber:wan"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wan_white { -+ label = "c2600:white:wan"; -+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; -+ }; -+ -+ power: power { -+ label = "c2600:white:power"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ general: general { -+ label = "c2600:white:general"; -+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts -@@ -0,0 +1,406 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Netgear Nighthawk X4 D7800"; -+ compatible = "netgear,d7800", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0xe000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power_white; -+ led-failsafe = &power_amber; -+ led-running = &power_white; -+ led-upgrade = &power_amber; -+ }; -+ -+ chosen { -+ bootargs = "rootfstype=squashfs noinitrd"; -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio6", "gpio54", "gpio65"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ mux { -+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", -+ "gpio24","gpio26", "gpio53", "gpio64"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ usb0_pwr_en_pins: usb0_pwr_en_pins { -+ mux { -+ pins = "gpio15"; -+ function = "gpio"; -+ drive-strength = <12>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ -+ usb1_pwr_en_pins: usb1_pwr_en_pins { -+ mux { -+ pins = "gpio16", "gpio68"; -+ function = "gpio"; -+ drive-strength = <12>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ sata-phy@1b400000 { -+ status = "ok"; -+ }; -+ -+ sata@29000000 { -+ status = "ok"; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb0_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb1_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ nand@1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ -+ nand-ecc-strength = <4>; -+ nand-bus-width = <8>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ qcadata@0 { -+ label = "qcadata"; -+ reg = <0x0000000 0x0c80000>; -+ read-only; -+ }; -+ -+ APPSBL@c80000 { -+ label = "APPSBL"; -+ reg = <0x0c80000 0x0500000>; -+ read-only; -+ }; -+ -+ APPSBLENV@1180000 { -+ label = "APPSBLENV"; -+ reg = <0x1180000 0x0080000>; -+ read-only; -+ }; -+ -+ art: art@1200000 { -+ label = "art"; -+ reg = <0x1200000 0x0140000>; -+ read-only; -+ }; -+ -+ artbak: art@1340000 { -+ label = "artbak"; -+ reg = <0x1340000 0x0140000>; -+ read-only; -+ }; -+ -+ kernel@1480000 { -+ label = "kernel"; -+ reg = <0x1480000 0x0200000>; -+ }; -+ -+ ubi@1680000 { -+ label = "ubi"; -+ reg = <0x1680000 0x1E00000>; -+ }; -+ -+ netgear@3480000 { -+ label = "netgear"; -+ reg = <0x3480000 0x4480000>; -+ read-only; -+ }; -+ -+ reserve@7900000 { -+ label = "reserve"; -+ reg = <0x7900000 0x0700000>; -+ read-only; -+ }; -+ -+ firmware@1480000 { -+ label = "firmware"; -+ reg = <0x1480000 0x2000000>; -+ }; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ phy-handle = <&phy4>; -+ qcom,id = <1>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ mtd-mac-address = <&art 6>; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ -+ mtd-mac-address = <&art 0>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ usb1 { -+ label = "d7800:white:usb1"; -+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb2 { -+ label = "d7800:white:usb2"; -+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power_amber: power_amber { -+ label = "d7800:amber:power"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_white { -+ label = "d7800:white:wan"; -+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_amber { -+ label = "d7800:amber:wan"; -+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wps { -+ label = "d7800:white:wps"; -+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ esata { -+ label = "d7800:white:esata"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power_white: power_white { -+ label = "d7800:white:power"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ wifi { -+ label = "d7800:white:wifi"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -0,0 +1,236 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+/ { -+ model = "Qualcomm IPQ8064/DB149"; -+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ alias { -+ serial0 = &uart2; -+ mdio-gpio0 = &mdio0; -+ }; -+ -+ chosen { -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ i2c4_pins: i2c4_pinmux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ bias-disable; -+ }; -+ -+ spi_pins: spi_pins { -+ mux { -+ pins = "gpio18", "gpio19", "gpio21"; -+ function = "gsbi5"; -+ drive-strength = <10>; -+ bias-none; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ rgmii0_pins: rgmii0_pins { -+ mux { -+ pins = "gpio2", "gpio66"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ }; -+ -+ gsbi2: gsbi@12480000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ uart2: serial@12490000 { -+ status = "ok"; -+ }; -+ }; -+ -+ gsbi5: gsbi@1a200000 { -+ qcom,mode = <GSBI_PROT_SPI>; -+ status = "ok"; -+ -+ spi4: spi@1a280000 { -+ status = "ok"; -+ spi-max-frequency = <50000000>; -+ -+ pinctrl-0 = <&spi_pins>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&qcom_pinmux 20 0>; -+ -+ flash: m25p80@0 { -+ compatible = "s25fl256s1"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <50000000>; -+ reg = <0>; -+ m25p,fast-read; -+ -+ partition@0 { -+ label = "lowlevel_init"; -+ reg = <0x0 0x1b0000>; -+ }; -+ -+ partition@1 { -+ label = "u-boot"; -+ reg = <0x1b0000 0x80000>; -+ }; -+ -+ partition@2 { -+ label = "u-boot-env"; -+ reg = <0x230000 0x40000>; -+ }; -+ -+ partition@3 { -+ label = "caldata"; -+ reg = <0x270000 0x40000>; -+ }; -+ -+ partition@4 { -+ label = "firmware"; -+ reg = <0x2b0000 0x1d50000>; -+ }; -+ }; -+ }; -+ }; -+ -+ sata-phy@1b400000 { -+ status = "ok"; -+ }; -+ -+ sata@29000000 { -+ status = "ok"; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ }; -+ -+ pcie2: pci@1b900000 { -+ status = "ok"; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; -+ -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ -+ phy6: ethernet-phy@6 { -+ device_type = "ethernet-phy"; -+ reg = <6>; -+ }; -+ -+ phy7: ethernet-phy@7 { -+ device_type = "ethernet-phy"; -+ reg = <7>; -+ }; -+ }; -+ -+ gmac0: ethernet@37000000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <0>; -+ phy-handle = <&phy4>; -+ -+ pinctrl-0 = <&rgmii0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <1>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ phy-handle = <&phy6>; -+ }; -+ -+ gmac3: ethernet@37600000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <3>; -+ phy-handle = <&phy7>; -+ }; -+ }; -+}; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -1,11 +1,13 @@ @@ -1876,7 +597,7 @@ + reg = <0x02012000 0x1000>; + regulator; + }; -+ ++ + sic_non_secure: sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; @@ -1885,33 +606,6 @@ gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; -@@ -174,7 +459,7 @@ - - syscon-tcsr = <&tcsr>; - -- serial@12490000 { -+ uart2: serial@12490000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x12490000 0x1000>, - <0x12480000 0x1000>; -@@ -212,7 +497,7 @@ - - syscon-tcsr = <&tcsr>; - -- gsbi4_serial: serial@16340000 { -+ uart4: serial@16340000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16340000 0x1000>, - <0x16300000 0x1000>; -@@ -249,7 +534,7 @@ - - syscon-tcsr = <&tcsr>; - -- serial@1a240000 { -+ uart5: serial@1a240000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a240000 0x1000>, - <0x1a200000 0x1000>; @@ -328,8 +613,12 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-ipq8064"; @@ -2299,2748 +993,3 @@ + hwlocks = <&sfpb_mutex 3>; }; }; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts -@@ -0,0 +1,399 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Linksys EA8500 WiFi Router"; -+ compatible = "linksys,ea8500", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power; -+ led-failsafe = &power; -+ led-running = &power; -+ led-upgrade = &power; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyMSM0,115200n8"; -+ linux,stdout-path = "serial0:115200n8"; -+ append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio65", "gpio67", "gpio68"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ mux { -+ pins = "gpio6", "gpio53", "gpio54"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ sata-phy@1b400000 { -+ status = "ok"; -+ }; -+ -+ sata@29000000 { -+ status = "ok"; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ pcie2: pci@1b900000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ nand@1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ -+ nand-ecc-strength = <4>; -+ nand-bus-width = <8>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0000000 0x0040000>; -+ read-only; -+ }; -+ -+ MIBIB@40000 { -+ label = "MIBIB"; -+ reg = <0x0040000 0x0140000>; -+ read-only; -+ }; -+ -+ SBL2@180000 { -+ label = "SBL2"; -+ reg = <0x0180000 0x0140000>; -+ read-only; -+ }; -+ -+ SBL3@2c0000 { -+ label = "SBL3"; -+ reg = <0x02c0000 0x0280000>; -+ read-only; -+ }; -+ -+ DDRCONFIG@540000 { -+ label = "DDRCONFIG"; -+ reg = <0x0540000 0x0120000>; -+ read-only; -+ }; -+ -+ SSD@660000 { -+ label = "SSD"; -+ reg = <0x0660000 0x0120000>; -+ read-only; -+ }; -+ -+ TZ@780000 { -+ label = "TZ"; -+ reg = <0x0780000 0x0280000>; -+ read-only; -+ }; -+ -+ RPM@a00000 { -+ label = "RPM"; -+ reg = <0x0a00000 0x0280000>; -+ read-only; -+ }; -+ -+ art: art@c80000 { -+ label = "art"; -+ reg = <0x0c80000 0x0140000>; -+ read-only; -+ }; -+ -+ APPSBL@dc0000 { -+ label = "APPSBL"; -+ reg = <0x0dc0000 0x0100000>; -+ read-only; -+ }; -+ -+ u_env@ec0000 { -+ label = "u_env"; -+ reg = <0x0ec0000 0x0040000>; -+ }; -+ -+ s_env@f00000 { -+ label = "s_env"; -+ reg = <0x0f00000 0x0040000>; -+ }; -+ -+ devinfo@f40000 { -+ label = "devinfo"; -+ reg = <0x0f40000 0x0040000>; -+ }; -+ -+ linux@f80000 { -+ label = "kernel1"; -+ reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ -+ }; -+ -+ rootfs@1280000 { -+ label = "rootfs1"; -+ reg = <0x1280000 0x2500000>; -+ }; -+ -+ linux2@3780000 { -+ label = "kernel2"; -+ reg = <0x3780000 0x2800000>; -+ }; -+ -+ rootfs2@3a80000 { -+ label = "rootfs2"; -+ reg = <0x3a80000 0x2500000>; -+ }; -+ -+ syscfg@5f80000 { -+ label = "syscfg"; -+ reg = <0x5f80000 0x2080000>; -+ }; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <1>; -+ qcom,rgmii_delay = <0>; -+ qcom,emulation = <0>; -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ //lan -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ qcom,phy_mdio_addr = <0>; /* none */ -+ qcom,poll_required = <0>; /* no polling */ -+ qcom,rgmii_delay = <0>; -+ qcom,emulation = <0>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ adm_dma: dma@18300000 { -+ status = "ok"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART >; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ wps { -+ label = "ea8500:green:wps"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power: power { -+ label = "ea8500:white:power"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; -+ default-state = "keep"; -+ }; -+ -+ wifi { -+ label = "ea8500:green:wifi"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts -@@ -0,0 +1,373 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Netgear Nighthawk X4 R7500"; -+ compatible = "netgear,r7500", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0xe000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power_white; -+ led-failsafe = &power_amber; -+ led-running = &power_white; -+ led-upgrade = &power_amber; -+ }; -+ -+ chosen { -+ bootargs = "rootfstype=squashfs noinitrd"; -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio6", "gpio54", "gpio65"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ mux { -+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", -+ "gpio24","gpio26", "gpio53", "gpio64"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ sata-phy@1b400000 { -+ status = "ok"; -+ }; -+ -+ sata@29000000 { -+ status = "ok"; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ }; -+ -+ nand@1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ -+ nand-ecc-strength = <4>; -+ nand-bus-width = <8>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ qcadata@0 { -+ label = "qcadata"; -+ reg = <0x0000000 0x0c80000>; -+ read-only; -+ }; -+ -+ APPSBL@c80000 { -+ label = "APPSBL"; -+ reg = <0x0c80000 0x0500000>; -+ read-only; -+ }; -+ -+ APPSBLENV@1180000 { -+ label = "APPSBLENV"; -+ reg = <0x1180000 0x0080000>; -+ read-only; -+ }; -+ -+ art: art@1200000 { -+ label = "art"; -+ reg = <0x1200000 0x0140000>; -+ read-only; -+ }; -+ -+ kernel@1340000 { -+ label = "kernel"; -+ reg = <0x1340000 0x0200000>; -+ }; -+ -+ ubi@1540000 { -+ label = "ubi"; -+ reg = <0x1540000 0x1800000>; -+ }; -+ -+ netgear@2d40000 { -+ label = "netgear"; -+ reg = <0x2d40000 0x0c00000>; -+ read-only; -+ }; -+ -+ reserve@3940000 { -+ label = "reserve"; -+ reg = <0x3940000 0x46c0000>; -+ read-only; -+ }; -+ -+ firmware@1340000 { -+ label = "firmware"; -+ reg = <0x1340000 0x1a00000>; -+ }; -+ -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ mtd-mac-address = <&art 6>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ -+ mtd-mac-address = <&art 0>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ usb1 { -+ label = "r7500:white:usb1"; -+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb2 { -+ label = "r7500:white:usb2"; -+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power_amber: power_amber { -+ label = "r7500:amber:power"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_white { -+ label = "r7500:white:wan"; -+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_amber { -+ label = "r7500:amber:wan"; -+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wps { -+ label = "r7500:white:wps"; -+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ esata { -+ label = "r7500:white:esata"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power_white: power_white { -+ label = "r7500:white:power"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ wifi { -+ label = "r7500:white:wifi"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts -@@ -0,0 +1,416 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Netgear Nighthawk X4 R7500v2"; -+ compatible = "netgear,r7500v2", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ -+ rsvd@5fe00000 { -+ reg = <0x5fe00000 0x200000>; -+ reusable; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power; -+ led-failsafe = &power; -+ led-running = &power; -+ led-upgrade = &power; -+ }; -+ -+ chosen { -+ bootargs = "rootfstype=squashfs noinitrd"; -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio6", "gpio54", "gpio65"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ mux { -+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", -+ "gpio24","gpio26", "gpio53", "gpio64"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ usb0_pwr_en_pins: usb0_pwr_en_pins { -+ mux { -+ pins = "gpio15"; -+ function = "gpio"; -+ drive-strength = <12>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ -+ usb1_pwr_en_pins: usb1_pwr_en_pins { -+ mux { -+ pins = "gpio16", "gpio68"; -+ function = "gpio"; -+ drive-strength = <12>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ sata-phy@1b400000 { -+ status = "ok"; -+ }; -+ -+ sata@29000000 { -+ status = "ok"; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb0_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb1_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ nand@1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ -+ nand-ecc-strength = <4>; -+ nand-bus-width = <8>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ qcadata@0 { -+ label = "qcadata"; -+ reg = <0x0000000 0x0c80000>; -+ read-only; -+ }; -+ -+ APPSBL@c80000 { -+ label = "APPSBL"; -+ reg = <0x0c80000 0x0500000>; -+ read-only; -+ }; -+ -+ APPSBLENV@1180000 { -+ label = "APPSBLENV"; -+ reg = <0x1180000 0x0080000>; -+ read-only; -+ }; -+ -+ art: art@1200000 { -+ label = "art"; -+ reg = <0x1200000 0x0140000>; -+ read-only; -+ }; -+ -+ artbak: art@1340000 { -+ label = "artbak"; -+ reg = <0x1340000 0x0140000>; -+ read-only; -+ }; -+ -+ kernel@1480000 { -+ label = "kernel"; -+ reg = <0x1480000 0x0200000>; -+ }; -+ -+ ubi@1680000 { -+ label = "ubi"; -+ reg = <0x1680000 0x1E00000>; -+ }; -+ -+ netgear@3480000 { -+ label = "netgear"; -+ reg = <0x3480000 0x4480000>; -+ read-only; -+ }; -+ -+ reserve@7900000 { -+ label = "reserve"; -+ reg = <0x7900000 0x0700000>; -+ read-only; -+ }; -+ -+ firmware@1480000 { -+ label = "firmware"; -+ reg = <0x1480000 0x2000000>; -+ }; -+ -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0xaa545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ mtd-mac-address = <&art 6>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ -+ mtd-mac-address = <&art 0>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ usb1 { -+ label = "r7500v2:amber:usb1"; -+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb3 { -+ label = "r7500v2:amber:usb3"; -+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ status { -+ label = "r7500v2:amber:status"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ internet { -+ label = "r7500v2:white:internet"; -+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan { -+ label = "r7500v2:white:wan"; -+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wps { -+ label = "r7500v2:white:wps"; -+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ esata { -+ label = "r7500v2:white:esata"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power: power { -+ label = "r7500v2:white:power"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ wifi { -+ label = "r7500v2:white:wifi"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts -@@ -0,0 +1,425 @@ -+#include "qcom-ipq8064-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "TP-Link Archer VR2600v"; -+ compatible = "tplink,vr2600v", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power; -+ led-failsafe = &general; -+ led-running = &power; -+ led-upgrade = &general; -+ }; -+ -+ chosen { -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ led_pins: led_pins { -+ mux { -+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", -+ "gpio26", "gpio53", "gpio56", "gpio66"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ button_pins: button_pins { -+ mux { -+ pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ spi_pins: spi_pins { -+ mux { -+ pins = "gpio18", "gpio19", "gpio21"; -+ function = "gsbi5"; -+ bias-pull-down; -+ }; -+ -+ data { -+ pins = "gpio18", "gpio19"; -+ drive-strength = <10>; -+ }; -+ -+ cs { -+ pins = "gpio20"; -+ drive-strength = <10>; -+ bias-pull-up; -+ }; -+ -+ clk { -+ pins = "gpio21"; -+ drive-strength = <12>; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ gsbi5: gsbi@1a200000 { -+ qcom,mode = <GSBI_PROT_SPI>; -+ status = "ok"; -+ -+ spi4: spi@1a280000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&spi_pins>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; -+ -+ flash: W25Q128@0 { -+ compatible = "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <50000000>; -+ reg = <0>; -+ -+ SBL1@0 { -+ label = "SBL1"; -+ reg = <0x0 0x20000>; -+ read-only; -+ }; -+ -+ MIBIB@20000 { -+ label = "MIBIB"; -+ reg = <0x20000 0x20000>; -+ read-only; -+ }; -+ -+ SBL2@40000 { -+ label = "SBL2"; -+ reg = <0x40000 0x40000>; -+ read-only; -+ }; -+ -+ SBL3@80000 { -+ label = "SBL3"; -+ reg = <0x80000 0x80000>; -+ read-only; -+ }; -+ -+ DDRCONFIG@100000 { -+ label = "DDRCONFIG"; -+ reg = <0x100000 0x10000>; -+ read-only; -+ }; -+ -+ SSD@110000 { -+ label = "SSD"; -+ reg = <0x110000 0x10000>; -+ read-only; -+ }; -+ -+ TZ@120000 { -+ label = "TZ"; -+ reg = <0x120000 0x80000>; -+ read-only; -+ }; -+ -+ RPM@1a0000 { -+ label = "RPM"; -+ reg = <0x1a0000 0x80000>; -+ read-only; -+ }; -+ -+ APPSBL@220000 { -+ label = "APPSBL"; -+ reg = <0x220000 0x80000>; -+ read-only; -+ }; -+ -+ APPSBLENV@2a0000 { -+ label = "APPSBLENV"; -+ reg = <0x2a0000 0x40000>; -+ read-only; -+ }; -+ -+ OLDART@2e0000 { -+ label = "OLDART"; -+ reg = <0x2e0000 0x40000>; -+ read-only; -+ }; -+ -+ kernel@320000 { -+ label = "kernel"; -+ reg = <0x320000 0x200000>; -+ }; -+ -+ rootfs@520000 { -+ label = "rootfs"; -+ reg = <0x520000 0xa60000>; -+ }; -+ -+ defaultmac: default-mac@0xfaf100 { -+ label = "default-mac"; -+ reg = <0xfaf100 0x00200>; -+ read-only; -+ }; -+ -+ ART@fc0000 { -+ label = "ART"; -+ reg = <0xfc0000 0x40000>; -+ read-only; -+ }; -+ }; -+ }; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ mtd-mac-address = <&defaultmac 0>; -+ mtd-mac-address-increment = <1>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ -+ mtd-mac-address = <&defaultmac 0>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ -+ dect { -+ label = "dect"; -+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_PHONE>; -+ }; -+ -+ ledswitch { -+ label = "ledswitch"; -+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_LIGHTS_TOGGLE>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ dsl { -+ label = "vr2600v:white:dsl"; -+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb { -+ label = "vr2600v:white:usb"; -+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ lan { -+ label = "vr2600v:white:lan"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wlan2g { -+ label = "vr2600v:white:wlan2g"; -+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wlan5g { -+ label = "vr2600v:white:wlan5g"; -+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power: power { -+ label = "vr2600v:white:power"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ phone { -+ label = "vr2600v:white:phone"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan { -+ label = "vr2600v:white:wan"; -+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ general: general { -+ label = "vr2600v:white:general"; -+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi -@@ -0,0 +1,153 @@ -+#include "qcom-ipq8064.dtsi" -+ -+/ { -+ model = "Qualcomm IPQ8065"; -+ compatible = "qcom,ipq8065", "qcom,ipq8064"; -+ -+ qcom,pvs { -+ qcom,pvs-format-a; -+ qcom,speed0-pvs0-bin-v0 = -+ < 1725000000 1262500 >, -+ < 1400000000 1175000 >, -+ < 1000000000 1100000 >, -+ < 800000000 1050000 >, -+ < 600000000 1000000 >, -+ < 384000000 975000 >; -+ qcom,speed0-pvs1-bin-v0 = -+ < 1725000000 1225000 >, -+ < 1400000000 1150000 >, -+ < 1000000000 1075000 >, -+ < 800000000 1025000 >, -+ < 600000000 975000 >, -+ < 384000000 950000 >; -+ qcom,speed0-pvs2-bin-v0 = -+ < 1725000000 1200000 >, -+ < 1400000000 1125000 >, -+ < 1000000000 1050000 >, -+ < 800000000 1000000 >, -+ < 600000000 950000 >, -+ < 384000000 925000 >; -+ qcom,speed0-pvs3-bin-v0 = -+ < 1725000000 1175000 >, -+ < 1400000000 1100000 >, -+ < 1000000000 1025000 >, -+ < 800000000 975000 >, -+ < 600000000 925000 >, -+ < 384000000 900000 >; -+ qcom,speed0-pvs4-bin-v0 = -+ < 1725000000 1150000 >, -+ < 1400000000 1075000 >, -+ < 1000000000 1000000 >, -+ < 800000000 950000 >, -+ < 600000000 900000 >, -+ < 384000000 875000 >; -+ qcom,speed0-pvs5-bin-v0 = -+ < 1725000000 1100000 >, -+ < 1400000000 1025000 >, -+ < 1000000000 950000 >, -+ < 800000000 900000 >, -+ < 600000000 850000 >, -+ < 384000000 825000 >; -+ qcom,speed0-pvs6-bin-v0 = -+ < 1725000000 1050000 >, -+ < 1400000000 975000 >, -+ < 1000000000 900000 >, -+ < 800000000 850000 >, -+ < 600000000 800000 >, -+ < 384000000 775000 >; -+ }; -+ -+ soc: soc { -+ -+ rpm@108000 { -+ -+ regulators { -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = <775000>; -+ regulator-max-microvolt = <1275000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = <775000>; -+ regulator-max-microvolt = <1275000>; -+ }; -+ }; -+ }; -+ -+ /* Temporary fixed regulator */ -+ vsdcc_fixed: vsdcc-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "SDCC Power"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ sdcc1bam:dma@12402000 { -+ compatible = "qcom,bam-v1.3.0"; -+ reg = <0x12402000 0x8000>; -+ interrupts = <0 98 0>; -+ clocks = <&gcc SDC1_H_CLK>; -+ clock-names = "bam_clk"; -+ #dma-cells = <1>; -+ qcom,ee = <0>; -+ }; -+ -+ sdcc3bam:dma@12182000 { -+ compatible = "qcom,bam-v1.3.0"; -+ reg = <0x12182000 0x8000>; -+ interrupts = <0 96 0>; -+ clocks = <&gcc SDC3_H_CLK>; -+ clock-names = "bam_clk"; -+ #dma-cells = <1>; -+ qcom,ee = <0>; -+ }; -+ -+ amba { -+ compatible = "arm,amba-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ sdcc1: sdcc@12400000 { -+ status = "disabled"; -+ compatible = "arm,pl18x", "arm,primecell"; -+ arm,primecell-periphid = <0x00051180>; -+ reg = <0x12400000 0x2000>; -+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "cmd_irq"; -+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; -+ clock-names = "mclk", "apb_pclk"; -+ bus-width = <8>; -+ max-frequency = <96000000>; -+ non-removable; -+ cap-sd-highspeed; -+ cap-mmc-highspeed; -+ vmmc-supply = <&vsdcc_fixed>; -+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; -+ dma-names = "tx", "rx"; -+ }; -+ -+ sdcc3: sdcc@12180000 { -+ compatible = "arm,pl18x", "arm,primecell"; -+ arm,primecell-periphid = <0x00051180>; -+ status = "disabled"; -+ reg = <0x12180000 0x2000>; -+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "cmd_irq"; -+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; -+ clock-names = "mclk", "apb_pclk"; -+ bus-width = <8>; -+ cap-sd-highspeed; -+ cap-mmc-highspeed; -+ max-frequency = <192000000>; -+ #mmc-ddr-1_8v; -+ sd-uhs-sdr104; -+ sd-uhs-ddr50; -+ vqmmc-supply = <&vsdcc_fixed>; -+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; -+ dma-names = "tx", "rx"; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts -@@ -0,0 +1,388 @@ -+#include "qcom-ipq8065-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "ZyXEL NBG6817"; -+ compatible = "zyxel,nbg6817", "qcom,ipq8065"; -+ -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ sdcc1 = &sdcc1; -+ -+ led-boot = &power; -+ led-failsafe = &power; -+ led-running = &power; -+ led-upgrade = &power; -+ }; -+ -+ chosen { -+ bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd"; -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio6", "gpio54", "gpio65"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ mux { -+ pins = "gpio9", "gpio26", "gpio33", "gpio64"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-down; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ -+ clk { -+ pins = "gpio1"; -+ input-disable; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ -+ tx { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; -+ input-disable; -+ }; -+ }; -+ -+ spi_pins: spi_pins { -+ mux { -+ pins = "gpio18", "gpio19", "gpio21"; -+ function = "gsbi5"; -+ drive-strength = <10>; -+ bias-none; -+ }; -+ -+ cs { -+ pins = "gpio20"; -+ drive-strength = <12>; -+ }; -+ }; -+ -+ usb0_pwr_en_pins: usb0_pwr_en_pins { -+ mux { -+ pins = "gpio16", "gpio17"; -+ function = "gpio"; -+ drive-strength = <12>; -+ }; -+ -+ pwr { -+ pins = "gpio17"; -+ bias-pull-down; -+ output-high; -+ }; -+ -+ ovc { -+ pins = "gpio16"; -+ bias-pull-up; -+ }; -+ }; -+ -+ usb1_pwr_en_pins: usb1_pwr_en_pins { -+ mux { -+ pins = "gpio14", "gpio15"; -+ function = "gpio"; -+ drive-strength = <12>; -+ }; -+ -+ pwr { -+ pins = "gpio14"; -+ bias-pull-down; -+ output-high; -+ }; -+ -+ ovc { -+ pins = "gpio15"; -+ bias-pull-up; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ gsbi5: gsbi@1a200000 { -+ qcom,mode = <GSBI_PROT_SPI>; -+ status = "ok"; -+ -+ spi4: spi@1a280000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&spi_pins>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; -+ -+ flash: m25p80@0 { -+ compatible = "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <51200000>; -+ reg = <0>; -+ -+ linux,part-probe = "qcom-smem"; -+ }; -+ }; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb0_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb1_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0xaa545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ -+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ -+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ -+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ -+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ -+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ -+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ -+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ -+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ -+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ -+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ -+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ -+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ -+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ qca,ar8327-initvals = < -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ >; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <0>; -+ qcom,rgmii_delay = <1>; -+ qcom,phy_mii_type = <0>; -+ qcom,emulation = <0>; -+ qcom,irq = <255>; -+ mdiobus = <&mdio0>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ qcom,phy_mdio_addr = <0>; /* none */ -+ qcom,poll_required = <0>; /* no polling */ -+ qcom,rgmii_delay = <0>; -+ qcom,phy_mii_type = <1>; -+ qcom,emulation = <0>; -+ qcom,irq = <258>; -+ mdiobus = <&mdio0>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ amba { -+ sdcc1: sdcc@12400000 { -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ internet { -+ label = "nbg6817:white:internet"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power: power { -+ label = "nbg6817:white:power"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ wifi2g { -+ label = "nbg6817:amber:wifi2g"; -+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ /* wifi2g amber from the manual is missing */ -+ -+ wifi5g { -+ label = "nbg6817:amber:wifi5g"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ /* wifi5g amber from the manual is missing */ -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8065-r7800.dts -@@ -0,0 +1,566 @@ -+#include "qcom-ipq8065-v1.0.dtsi" -+ -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "Netgear Nighthawk X4S R7800"; -+ compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; -+ -+ memory@0 { -+ reg = <0x42000000 0x1e000000>; -+ device_type = "memory"; -+ }; -+ -+ reserved-memory { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ rsvd@41200000 { -+ reg = <0x41200000 0x300000>; -+ no-map; -+ }; -+ -+ rsvd@5fe00000 { -+ reg = <0x5fe00000 0x200000>; -+ reusable; -+ }; -+ }; -+ -+ aliases { -+ serial0 = &uart4; -+ mdio-gpio0 = &mdio0; -+ -+ led-boot = &power_white; -+ led-failsafe = &power_amber; -+ led-running = &power_white; -+ led-upgrade = &power_amber; -+ }; -+ -+ chosen { -+ linux,stdout-path = "serial0:115200n8"; -+ }; -+ -+ soc { -+ pinmux@800000 { -+ button_pins: button_pins { -+ mux { -+ pins = "gpio6", "gpio54", "gpio65"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-up; -+ }; -+ }; -+ -+ i2c4_pins: i2c4_pinmux { -+ mux { -+ pins = "gpio12", "gpio13"; -+ function = "gsbi4"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ led_pins: led_pins { -+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", -+ "gpio24","gpio26", "gpio53", "gpio64"; -+ function = "gpio"; -+ drive-strength = <2>; -+ bias-pull-down; -+ }; -+ -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ -+ clk { -+ pins = "gpio1"; -+ input-disable; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ -+ tx { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; -+ input-disable; -+ }; -+ }; -+ -+ spi_pins: spi_pins { -+ mux { -+ pins = "gpio18", "gpio19", "gpio21"; -+ function = "gsbi5"; -+ bias-pull-down; -+ }; -+ -+ data { -+ pins = "gpio18", "gpio19"; -+ drive-strength = <10>; -+ }; -+ -+ cs { -+ pins = "gpio20"; -+ drive-strength = <10>; -+ bias-pull-up; -+ }; -+ -+ clk { -+ pins = "gpio21"; -+ drive-strength = <12>; -+ }; -+ }; -+ -+ spi6_pins: spi6_pins { -+ mux { -+ pins = "gpio55", "gpio56", "gpio58"; -+ function = "gsbi6"; -+ bias-pull-down; -+ }; -+ -+ mosi { -+ pins = "gpio55"; -+ drive-strength = <12>; -+ }; -+ -+ miso { -+ pins = "gpio56"; -+ drive-strength = <14>; -+ }; -+ -+ cs { -+ pins = "gpio57"; -+ drive-strength = <12>; -+ bias-pull-up; -+ }; -+ -+ clk { -+ pins = "gpio58"; -+ drive-strength = <12>; -+ }; -+ -+ reset { -+ pins = "gpio33"; -+ drive-strength = <10>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ -+ usb0_pwr_en_pins: usb0_pwr_en_pins { -+ mux { -+ pins = "gpio15"; -+ function = "gpio"; -+ drive-strength = <12>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ -+ usb1_pwr_en_pins: usb1_pwr_en_pins { -+ mux { -+ pins = "gpio16", "gpio68"; -+ function = "gpio"; -+ drive-strength = <12>; -+ bias-pull-down; -+ output-high; -+ }; -+ }; -+ }; -+ -+ gsbi@16300000 { -+ qcom,mode = <GSBI_PROT_I2C_UART>; -+ status = "ok"; -+ serial@16340000 { -+ status = "ok"; -+ }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ -+ }; -+ -+ gsbi5: gsbi@1a200000 { -+ qcom,mode = <GSBI_PROT_SPI>; -+ status = "ok"; -+ -+ spi5: spi@1a280000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&spi_pins>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; -+ -+ flash: m25p80@0 { -+ compatible = "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <50000000>; -+ reg = <0>; -+ -+ linux,part-probe = "qcom-smem"; -+ }; -+ }; -+ }; -+ -+ gsbi6: gsbi@16500000 { -+ qcom,mode = <GSBI_PROT_SPI>; -+ status = "ok"; -+ spi6: spi@16580000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&spi6_pins>; -+ pinctrl-names = "default"; -+ -+ cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; -+ -+ spi-nor@0 { -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <6000000>; -+ }; -+ }; -+ }; -+ -+ sata-phy@1b400000 { -+ status = "ok"; -+ }; -+ -+ sata@29000000 { -+ ports-implemented = <0x1>; -+ status = "ok"; -+ }; -+ -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb0_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ -+ pinctrl-0 = <&usb1_pwr_en_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ nand@1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-bus-width = <8>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ qcadata@0 { -+ label = "qcadata"; -+ reg = <0x0000000 0x0c80000>; -+ read-only; -+ }; -+ -+ APPSBL@c80000 { -+ label = "APPSBL"; -+ reg = <0x0c80000 0x0500000>; -+ read-only; -+ }; -+ -+ APPSBLENV@1180000 { -+ label = "APPSBLENV"; -+ reg = <0x1180000 0x0080000>; -+ read-only; -+ }; -+ -+ art: art@1200000 { -+ label = "art"; -+ reg = <0x1200000 0x0140000>; -+ read-only; -+ }; -+ -+ artbak: art@1340000 { -+ label = "artbak"; -+ reg = <0x1340000 0x0140000>; -+ read-only; -+ }; -+ -+ kernel@1480000 { -+ label = "kernel"; -+ reg = <0x1480000 0x0200000>; -+ }; -+ -+ ubi@1680000 { -+ label = "ubi"; -+ reg = <0x1680000 0x1E00000>; -+ }; -+ -+ netgear@3480000 { -+ label = "netgear"; -+ reg = <0x3480000 0x4480000>; -+ read-only; -+ }; -+ -+ reserve@7900000 { -+ label = "reserve"; -+ reg = <0x7900000 0x0700000>; -+ read-only; -+ }; -+ -+ firmware@1480000 { -+ label = "firmware"; -+ reg = <0x1480000 0x2000000>; -+ }; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; -+ reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0xaa545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ -+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ -+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ -+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ -+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ -+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ -+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ -+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ -+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ -+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ -+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ -+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ -+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ -+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ -+ >; -+ qca,ar8327-vlans = < -+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */ -+ 0x2 0x21 /* VLAN2 Ports 0/5 */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ qca,ar8327-initvals = < -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ >; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ qcom,phy_mdio_addr = <4>; -+ qcom,poll_required = <0>; -+ qcom,rgmii_delay = <1>; -+ qcom,phy_mii_type = <0>; -+ qcom,emulation = <0>; -+ qcom,irq = <255>; -+ mdiobus = <&mdio0>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ mtd-mac-address = <&art 6>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; -+ qcom,phy_mdio_addr = <0>; /* none */ -+ qcom,poll_required = <0>; /* no polling */ -+ qcom,rgmii_delay = <0>; -+ qcom,phy_mii_type = <1>; -+ qcom,emulation = <0>; -+ qcom,irq = <258>; -+ mdiobus = <&mdio0>; -+ -+ mtd-mac-address = <&art 0>; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ rpm@108000 { -+ pinctrl-0 = <&i2c4_pins>; -+ pinctrl-names = "default"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&button_pins>; -+ pinctrl-names = "default"; -+ -+ wifi { -+ label = "wifi"; -+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RFKILL>; -+ debounce-interval = <60>; -+ wakeup-source; -+ }; -+ -+ reset { -+ label = "reset"; -+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_RESTART>; -+ debounce-interval = <60>; -+ wakeup-source; -+ }; -+ -+ wps { -+ label = "wps"; -+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; -+ linux,code = <KEY_WPS_BUTTON>; -+ debounce-interval = <60>; -+ wakeup-source; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&led_pins>; -+ pinctrl-names = "default"; -+ -+ power_white: power_white { -+ label = "r7800:white:power"; -+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ -+ power_amber: power_amber { -+ label = "r7800:amber:power"; -+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_white { -+ label = "r7800:white:wan"; -+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan_amber { -+ label = "r7800:amber:wan"; -+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb1 { -+ label = "r7800:white:usb1"; -+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb2 { -+ label = "r7800:white:usb2"; -+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ esata { -+ label = "r7800:white:esata"; -+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wifi { -+ label = "r7800:white:wifi"; -+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wps { -+ label = "r7800:white:wps"; -+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&adm_dma { -+ status = "ok"; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi -@@ -0,0 +1 @@ -+#include "qcom-ipq8065.dtsi" |