diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch | 4602 |
1 files changed, 4602 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch new file mode 100644 index 0000000000..eb84124b54 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch @@ -0,0 +1,4602 @@ +From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter <chunkeey@googlemail.com> +Date: Thu, 19 Jan 2017 02:01:31 +0100 +Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver + +Signed-off-by: Christian Lamparter <chunkeey@gmail.com> +--- + drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++ + drivers/net/ethernet/qualcomm/Makefile | 1 + + 2 files changed, 10 insertions(+) + +--- a/drivers/net/ethernet/qualcomm/Kconfig ++++ b/drivers/net/ethernet/qualcomm/Kconfig +@@ -37,4 +37,13 @@ config QCOM_EMAC + low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 + Precision Clock Synchronization Protocol. + ++config ESSEDMA ++ tristate "Qualcomm Atheros ESS Edma support" ++ ---help--- ++ This driver supports ethernet edma adapter. ++ Say Y to build this driver. ++ ++ To compile this driver as a module, choose M here. The module ++ will be called essedma.ko. ++ + endif # NET_VENDOR_QUALCOMM +--- a/drivers/net/ethernet/qualcomm/Makefile ++++ b/drivers/net/ethernet/qualcomm/Makefile +@@ -6,3 +6,4 @@ obj-$(CONFIG_QCA7000) += qcaspi.o + qcaspi-objs := qca_spi.o qca_framing.o qca_7k.o qca_debug.o + + obj-y += emac/ ++obj-$(CONFIG_ESSEDMA) += essedma/ +--- /dev/null ++++ b/drivers/net/ethernet/qualcomm/essedma/Makefile +@@ -0,0 +1,9 @@ ++# ++## Makefile for the Qualcomm Atheros ethernet edma driver ++# ++ ++ ++obj-$(CONFIG_ESSEDMA) += essedma.o ++ ++essedma-objs := edma_axi.o edma.o edma_ethtool.o ++ +--- /dev/null ++++ b/drivers/net/ethernet/qualcomm/essedma/edma.c +@@ -0,0 +1,2168 @@ ++/* ++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for ++ * any purpose with or without fee is hereby granted, provided that the ++ * above copyright notice and this permission notice appear in all copies. ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT ++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include <linux/platform_device.h> ++#include <linux/if_vlan.h> ++#include "ess_edma.h" ++#include "edma.h" ++ ++extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; ++bool edma_stp_rstp; ++u16 edma_ath_eth_type; ++ ++/* edma_skb_priority_offset() ++ * get edma skb priority ++ */ ++static unsigned int edma_skb_priority_offset(struct sk_buff *skb) ++{ ++ return (skb->priority >> 2) & 1; ++} ++ ++/* edma_alloc_tx_ring() ++ * Allocate Tx descriptors ring ++ */ ++static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo, ++ struct edma_tx_desc_ring *etdr) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ ++ /* Initialize ring */ ++ etdr->size = sizeof(struct edma_sw_desc) * etdr->count; ++ etdr->sw_next_to_fill = 0; ++ etdr->sw_next_to_clean = 0; ++ ++ /* Allocate SW descriptors */ ++ etdr->sw_desc = vzalloc(etdr->size); ++ if (!etdr->sw_desc) { ++ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr); ++ return -ENOMEM; ++ } ++ ++ /* Allocate HW descriptors */ ++ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma, ++ GFP_KERNEL); ++ if (!etdr->hw_desc) { ++ dev_err(&pdev->dev, "descriptor allocation for tx ring failed"); ++ vfree(etdr->sw_desc); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++/* edma_free_tx_ring() ++ * Free tx rings allocated by edma_alloc_tx_rings ++ */ ++static void edma_free_tx_ring(struct edma_common_info *edma_cinfo, ++ struct edma_tx_desc_ring *etdr) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ ++ if (likely(etdr->dma)) ++ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc, ++ etdr->dma); ++ ++ vfree(etdr->sw_desc); ++ etdr->sw_desc = NULL; ++} ++ ++/* edma_alloc_rx_ring() ++ * allocate rx descriptor ring ++ */ ++static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo, ++ struct edma_rfd_desc_ring *erxd) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ ++ erxd->size = sizeof(struct edma_sw_desc) * erxd->count; ++ erxd->sw_next_to_fill = 0; ++ erxd->sw_next_to_clean = 0; ++ ++ /* Allocate SW descriptors */ ++ erxd->sw_desc = vzalloc(erxd->size); ++ if (!erxd->sw_desc) ++ return -ENOMEM; ++ ++ /* Alloc HW descriptors */ ++ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma, ++ GFP_KERNEL); ++ if (!erxd->hw_desc) { ++ vfree(erxd->sw_desc); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++/* edma_free_rx_ring() ++ * Free rx ring allocated by alloc_rx_ring ++ */ ++static void edma_free_rx_ring(struct edma_common_info *edma_cinfo, ++ struct edma_rfd_desc_ring *rxdr) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ ++ if (likely(rxdr->dma)) ++ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc, ++ rxdr->dma); ++ ++ vfree(rxdr->sw_desc); ++ rxdr->sw_desc = NULL; ++} ++ ++/* edma_configure_tx() ++ * Configure transmission control data ++ */ ++static void edma_configure_tx(struct edma_common_info *edma_cinfo) ++{ ++ u32 txq_ctrl_data; ++ ++ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT); ++ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN; ++ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT); ++ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data); ++} ++ ++ ++/* edma_configure_rx() ++ * configure reception control data ++ */ ++static void edma_configure_rx(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_hw *hw = &edma_cinfo->hw; ++ u32 rss_type, rx_desc1, rxq_ctrl_data; ++ ++ /* Set RSS type */ ++ rss_type = hw->rss_type; ++ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type); ++ ++ /* Set RFD burst number */ ++ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT); ++ ++ /* Set RFD prefetch threshold */ ++ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT); ++ ++ /* Set RFD in host ring low threshold to generte interrupt */ ++ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT); ++ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1); ++ ++ /* Set Rx FIFO threshold to start to DMA data to host */ ++ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE; ++ ++ /* Set RX remove vlan bit */ ++ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN; ++ ++ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data); ++} ++ ++/* edma_alloc_rx_buf() ++ * does skb allocation for the received packets. ++ */ ++static int edma_alloc_rx_buf(struct edma_common_info ++ *edma_cinfo, ++ struct edma_rfd_desc_ring *erdr, ++ int cleaned_count, int queue_id) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ struct edma_rx_free_desc *rx_desc; ++ struct edma_sw_desc *sw_desc; ++ struct sk_buff *skb; ++ unsigned int i; ++ u16 prod_idx, length; ++ u32 reg_data; ++ ++ if (cleaned_count > erdr->count) { ++ dev_err(&pdev->dev, "Incorrect cleaned_count %d", ++ cleaned_count); ++ return -1; ++ } ++ ++ i = erdr->sw_next_to_fill; ++ ++ while (cleaned_count) { ++ sw_desc = &erdr->sw_desc[i]; ++ length = edma_cinfo->rx_head_buffer_len; ++ ++ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) { ++ skb = sw_desc->skb; ++ } else { ++ /* alloc skb */ ++ skb = netdev_alloc_skb(edma_netdev[0], length); ++ if (!skb) { ++ /* Better luck next round */ ++ break; ++ } ++ } ++ ++ if (edma_cinfo->page_mode) { ++ struct page *pg = alloc_page(GFP_ATOMIC); ++ ++ if (!pg) { ++ dev_kfree_skb_any(skb); ++ break; ++ } ++ ++ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0, ++ edma_cinfo->rx_page_buffer_len, ++ DMA_FROM_DEVICE); ++ if (dma_mapping_error(&pdev->dev, ++ sw_desc->dma)) { ++ __free_page(pg); ++ dev_kfree_skb_any(skb); ++ break; ++ } ++ ++ skb_fill_page_desc(skb, 0, pg, 0, ++ edma_cinfo->rx_page_buffer_len); ++ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG; ++ sw_desc->length = edma_cinfo->rx_page_buffer_len; ++ } else { ++ sw_desc->dma = dma_map_single(&pdev->dev, skb->data, ++ length, DMA_FROM_DEVICE); ++ if (dma_mapping_error(&pdev->dev, ++ sw_desc->dma)) { ++ dev_kfree_skb_any(skb); ++ break; ++ } ++ ++ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD; ++ sw_desc->length = length; ++ } ++ ++ /* Update the buffer info */ ++ sw_desc->skb = skb; ++ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]); ++ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma); ++ if (++i == erdr->count) ++ i = 0; ++ cleaned_count--; ++ } ++ ++ erdr->sw_next_to_fill = i; ++ ++ if (i == 0) ++ prod_idx = erdr->count - 1; ++ else ++ prod_idx = i - 1; ++ ++ /* Update the producer index */ ++ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), ®_data); ++ reg_data &= ~EDMA_RFD_PROD_IDX_BITS; ++ reg_data |= prod_idx; ++ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data); ++ return cleaned_count; ++} ++ ++/* edma_init_desc() ++ * update descriptor ring size, buffer and producer/consumer index ++ */ ++static void edma_init_desc(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_rfd_desc_ring *rfd_ring; ++ struct edma_tx_desc_ring *etdr; ++ int i = 0, j = 0; ++ u32 data = 0; ++ u16 hw_cons_idx = 0; ++ ++ /* Set the base address of every TPD ring. */ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { ++ etdr = edma_cinfo->tpd_ring[i]; ++ ++ /* Update descriptor ring base address */ ++ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma); ++ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data); ++ ++ /* Calculate hardware consumer index */ ++ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff; ++ etdr->sw_next_to_fill = hw_cons_idx; ++ etdr->sw_next_to_clean = hw_cons_idx; ++ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT); ++ data |= hw_cons_idx; ++ ++ /* update producer index */ ++ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data); ++ ++ /* update SW consumer index register */ ++ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx); ++ ++ /* Set TPD ring size */ ++ edma_write_reg(EDMA_REG_TPD_RING_SIZE, ++ edma_cinfo->tx_ring_count & ++ EDMA_TPD_RING_SIZE_MASK); ++ } ++ ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ rfd_ring = edma_cinfo->rfd_ring[j]; ++ /* Update Receive Free descriptor ring base address */ ++ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j), ++ (u32)(rfd_ring->dma)); ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++ ++ data = edma_cinfo->rx_head_buffer_len; ++ if (edma_cinfo->page_mode) ++ data = edma_cinfo->rx_page_buffer_len; ++ ++ data &= EDMA_RX_BUF_SIZE_MASK; ++ data <<= EDMA_RX_BUF_SIZE_SHIFT; ++ ++ /* Update RFD ring size and RX buffer size */ ++ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK) ++ << EDMA_RFD_RING_SIZE_SHIFT; ++ ++ edma_write_reg(EDMA_REG_RX_DESC0, data); ++ ++ /* Disable TX FIFO low watermark and high watermark */ ++ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0); ++ ++ /* Load all of base address above */ ++ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data); ++ data |= 1 << EDMA_LOAD_PTR_SHIFT; ++ edma_write_reg(EDMA_REG_TX_SRAM_PART, data); ++} ++ ++/* edma_receive_checksum ++ * Api to check checksum on receive packets ++ */ ++static void edma_receive_checksum(struct edma_rx_return_desc *rd, ++ struct sk_buff *skb) ++{ ++ skb_checksum_none_assert(skb); ++ ++ /* check the RRD IP/L4 checksum bit to see if ++ * its set, which in turn indicates checksum ++ * failure. ++ */ ++ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK) ++ return; ++ ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++} ++ ++/* edma_clean_rfd() ++ * clean up rx resourcers on error ++ */ ++static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index) ++{ ++ struct edma_rx_free_desc *rx_desc; ++ struct edma_sw_desc *sw_desc; ++ ++ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]); ++ sw_desc = &erdr->sw_desc[index]; ++ if (sw_desc->skb) { ++ dev_kfree_skb_any(sw_desc->skb); ++ sw_desc->skb = NULL; ++ } ++ ++ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc)); ++} ++ ++/* edma_rx_complete_fraglist() ++ * Complete Rx processing for fraglist skbs ++ */ ++static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd) ++{ ++ int i; ++ u32 priority; ++ u16 port_type; ++ u8 mac_addr[EDMA_ETH_HDR_LEN]; ++ ++ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT) ++ & EDMA_RRD_PORT_TYPE_MASK; ++ /* if port type is 0x4, then only proceed with ++ * other stp/rstp calculation ++ */ ++ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) { ++ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00}; ++ ++ /* calculate the frame priority */ ++ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) ++ & EDMA_RRD_PRIORITY_MASK; ++ ++ for (i = 0; i < EDMA_ETH_HDR_LEN; i++) ++ mac_addr[i] = skb->data[i]; ++ ++ /* Check if destination mac addr is bpdu addr */ ++ if (!memcmp(mac_addr, bpdu_mac, 6)) { ++ /* destination mac address is BPDU ++ * destination mac address, then add ++ * atheros header to the packet. ++ */ ++ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) | ++ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) | ++ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id; ++ skb_push(skb, 4); ++ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); ++ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type); ++ *(uint16_t *)&skb->data[14] = htons(athr_hdr); ++ } ++ } ++} ++ ++/* ++ * edma_rx_complete_fraglist() ++ * Complete Rx processing for fraglist skbs ++ */ ++static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, ++ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ struct edma_hw *hw = &edma_cinfo->hw; ++ struct sk_buff *skb_temp; ++ struct edma_sw_desc *sw_desc; ++ int i; ++ u16 size_remaining; ++ ++ skb->data_len = 0; ++ skb->tail += (hw->rx_head_buff_size - 16); ++ skb->len = skb->truesize = length; ++ size_remaining = length - (hw->rx_head_buff_size - 16); ++ ++ /* clean-up all related sw_descs */ ++ for (i = 1; i < num_rfds; i++) { ++ struct sk_buff *skb_prev; ++ sw_desc = &erdr->sw_desc[sw_next_to_clean]; ++ skb_temp = sw_desc->skb; ++ ++ dma_unmap_single(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_FROM_DEVICE); ++ ++ if (size_remaining < hw->rx_head_buff_size) ++ skb_put(skb_temp, size_remaining); ++ else ++ skb_put(skb_temp, hw->rx_head_buff_size); ++ ++ /* ++ * If we are processing the first rfd, we link ++ * skb->frag_list to the skb corresponding to the ++ * first RFD ++ */ ++ if (i == 1) ++ skb_shinfo(skb)->frag_list = skb_temp; ++ else ++ skb_prev->next = skb_temp; ++ skb_prev = skb_temp; ++ skb_temp->next = NULL; ++ ++ skb->data_len += skb_temp->len; ++ size_remaining -= skb_temp->len; ++ ++ /* Increment SW index */ ++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); ++ (*cleaned_count)++; ++ } ++ ++ return sw_next_to_clean; ++} ++ ++/* edma_rx_complete_paged() ++ * Complete Rx processing for paged skbs ++ */ ++static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean, ++ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ struct sk_buff *skb_temp; ++ struct edma_sw_desc *sw_desc; ++ int i; ++ u16 size_remaining; ++ ++ skb_frag_t *frag = &skb_shinfo(skb)->frags[0]; ++ ++ /* Setup skbuff fields */ ++ skb->len = length; ++ ++ if (likely(num_rfds <= 1)) { ++ skb->data_len = length; ++ skb->truesize += edma_cinfo->rx_page_buffer_len; ++ skb_fill_page_desc(skb, 0, skb_frag_page(frag), ++ 16, length); ++ } else { ++ frag->size -= 16; ++ skb->data_len = frag->size; ++ skb->truesize += edma_cinfo->rx_page_buffer_len; ++ size_remaining = length - frag->size; ++ ++ skb_fill_page_desc(skb, 0, skb_frag_page(frag), ++ 16, frag->size); ++ ++ /* clean-up all related sw_descs */ ++ for (i = 1; i < num_rfds; i++) { ++ sw_desc = &erdr->sw_desc[sw_next_to_clean]; ++ skb_temp = sw_desc->skb; ++ frag = &skb_shinfo(skb_temp)->frags[0]; ++ dma_unmap_page(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_FROM_DEVICE); ++ ++ if (size_remaining < edma_cinfo->rx_page_buffer_len) ++ frag->size = size_remaining; ++ ++ skb_fill_page_desc(skb, i, skb_frag_page(frag), ++ 0, frag->size); ++ ++ skb_shinfo(skb_temp)->nr_frags = 0; ++ dev_kfree_skb_any(skb_temp); ++ ++ skb->data_len += frag->size; ++ skb->truesize += edma_cinfo->rx_page_buffer_len; ++ size_remaining -= frag->size; ++ ++ /* Increment SW index */ ++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); ++ (*cleaned_count)++; ++ } ++ } ++ ++ return sw_next_to_clean; ++} ++ ++/* ++ * edma_rx_complete() ++ * Main api called from the poll function to process rx packets. ++ */ ++static void edma_rx_complete(struct edma_common_info *edma_cinfo, ++ int *work_done, int work_to_do, int queue_id, ++ struct napi_struct *napi) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id]; ++ struct net_device *netdev; ++ struct edma_adapter *adapter; ++ struct edma_sw_desc *sw_desc; ++ struct sk_buff *skb; ++ struct edma_rx_return_desc *rd; ++ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1, ++ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0; ++ u32 data = 0; ++ u8 *vaddr; ++ int port_id, i, drop_count = 0; ++ u32 priority; ++ u16 count = erdr->count, rfd_avail; ++ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3}; ++ ++ sw_next_to_clean = erdr->sw_next_to_clean; ++ ++ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); ++ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & ++ EDMA_RFD_CONS_IDX_MASK; ++ ++ do { ++ while (sw_next_to_clean != hw_next_to_clean) { ++ if (!work_to_do) ++ break; ++ ++ sw_desc = &erdr->sw_desc[sw_next_to_clean]; ++ skb = sw_desc->skb; ++ ++ /* Unmap the allocated buffer */ ++ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) ++ dma_unmap_single(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_FROM_DEVICE); ++ else ++ dma_unmap_page(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_FROM_DEVICE); ++ ++ /* Get RRD */ ++ if (edma_cinfo->page_mode) { ++ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0])); ++ memcpy((uint8_t *)&rrd[0], vaddr, 16); ++ rd = (struct edma_rx_return_desc *)rrd; ++ kunmap_atomic(vaddr); ++ } else { ++ rd = (struct edma_rx_return_desc *)skb->data; ++ } ++ ++ /* Check if RRD is valid */ ++ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) { ++ edma_clean_rfd(erdr, sw_next_to_clean); ++ sw_next_to_clean = (sw_next_to_clean + 1) & ++ (erdr->count - 1); ++ cleaned_count++; ++ continue; ++ } ++ ++ /* Get the number of RFDs from RRD */ ++ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK; ++ ++ /* Get Rx port ID from switch */ ++ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK; ++ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) { ++ dev_err(&pdev->dev, "Invalid RRD source port bit set"); ++ for (i = 0; i < num_rfds; i++) { ++ edma_clean_rfd(erdr, sw_next_to_clean); ++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); ++ cleaned_count++; ++ } ++ continue; ++ } ++ ++ /* check if we have a sink for the data we receive. ++ * If the interface isn't setup, we have to drop the ++ * incoming data for now. ++ */ ++ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id]; ++ if (!netdev) { ++ edma_clean_rfd(erdr, sw_next_to_clean); ++ sw_next_to_clean = (sw_next_to_clean + 1) & ++ (erdr->count - 1); ++ cleaned_count++; ++ continue; ++ } ++ adapter = netdev_priv(netdev); ++ ++ /* This code is added to handle a usecase where high ++ * priority stream and a low priority stream are ++ * received simultaneously on DUT. The problem occurs ++ * if one of the Rx rings is full and the corresponding ++ * core is busy with other stuff. This causes ESS CPU ++ * port to backpressure all incoming traffic including ++ * high priority one. We monitor free descriptor count ++ * on each CPU and whenever it reaches threshold (< 80), ++ * we drop all low priority traffic and let only high ++ * priotiy traffic pass through. We can hence avoid ++ * ESS CPU port to send backpressure on high priroity ++ * stream. ++ */ ++ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT) ++ & EDMA_RRD_PRIORITY_MASK; ++ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) { ++ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1); ++ if (rfd_avail < EDMA_RFD_AVAIL_THR) { ++ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE; ++ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1); ++ adapter->stats.rx_dropped++; ++ cleaned_count++; ++ drop_count++; ++ if (drop_count == 3) { ++ work_to_do--; ++ (*work_done)++; ++ drop_count = 0; ++ } ++ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { ++ /* If buffer clean count reaches 16, we replenish HW buffers. */ ++ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); ++ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), ++ sw_next_to_clean); ++ cleaned_count = ret_count; ++ } ++ continue; ++ } ++ } ++ ++ work_to_do--; ++ (*work_done)++; ++ ++ /* Increment SW index */ ++ sw_next_to_clean = (sw_next_to_clean + 1) & ++ (erdr->count - 1); ++ ++ cleaned_count++; ++ ++ /* Get the packet size and allocate buffer */ ++ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK; ++ ++ if (edma_cinfo->page_mode) { ++ /* paged skb */ ++ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); ++ if (!pskb_may_pull(skb, ETH_HLEN)) { ++ dev_kfree_skb_any(skb); ++ continue; ++ } ++ } else { ++ /* single or fraglist skb */ ++ ++ /* Addition of 16 bytes is required, as in the packet ++ * first 16 bytes are rrd descriptors, so actual data ++ * starts from an offset of 16. ++ */ ++ skb_reserve(skb, 16); ++ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) { ++ skb_put(skb, length); ++ } else { ++ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo); ++ } ++ } ++ ++ if (edma_stp_rstp) { ++ edma_rx_complete_stp_rstp(skb, port_id, rd); ++ } ++ ++ skb->protocol = eth_type_trans(skb, netdev); ++ ++ /* Record Rx queue for RFS/RPS and fill flow hash from HW */ ++ skb_record_rx_queue(skb, queue_to_rxid[queue_id]); ++ if (netdev->features & NETIF_F_RXHASH) { ++ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT); ++ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END)) ++ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4); ++ } ++ ++#ifdef CONFIG_NF_FLOW_COOKIE ++ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK; ++#endif ++ edma_receive_checksum(rd, skb); ++ ++ /* Process VLAN HW acceleration indication provided by HW */ ++ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) { ++ vlan = rd->rrd4; ++ if (likely(rd->rrd7 & EDMA_RRD_CVLAN)) ++ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan); ++ else if (rd->rrd1 & EDMA_RRD_SVLAN) ++ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan); ++ } ++ ++ /* Update rx statistics */ ++ adapter->stats.rx_packets++; ++ adapter->stats.rx_bytes += length; ++ ++ /* Check if we reached refill threshold */ ++ if (cleaned_count == EDMA_RX_BUFFER_WRITE) { ++ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); ++ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), ++ sw_next_to_clean); ++ cleaned_count = ret_count; ++ } ++ ++ /* At this point skb should go to stack */ ++ napi_gro_receive(napi, skb); ++ } ++ ++ /* Check if we still have NAPI budget */ ++ if (!work_to_do) ++ break; ++ ++ /* Read index once again since we still have NAPI budget */ ++ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data); ++ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) & ++ EDMA_RFD_CONS_IDX_MASK; ++ } while (hw_next_to_clean != sw_next_to_clean); ++ ++ erdr->sw_next_to_clean = sw_next_to_clean; ++ ++ /* Refill here in case refill threshold wasn't reached */ ++ if (likely(cleaned_count)) { ++ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id); ++ if (ret_count) ++ dev_dbg(&pdev->dev, "Not all buffers was reallocated"); ++ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id), ++ erdr->sw_next_to_clean); ++ } ++} ++ ++/* edma_delete_rfs_filter() ++ * Remove RFS filter from switch ++ */ ++static int edma_delete_rfs_filter(struct edma_adapter *adapter, ++ struct edma_rfs_filter_node *filter_node) ++{ ++ int res = -1; ++ ++ struct flow_keys *keys = &filter_node->keys; ++ ++ if (likely(adapter->set_rfs_rule)) ++ res = (*adapter->set_rfs_rule)(adapter->netdev, ++ flow_get_u32_src(keys), flow_get_u32_dst(keys), ++ keys->ports.src, keys->ports.dst, ++ keys->basic.ip_proto, filter_node->rq_id, 0); ++ ++ return res; ++} ++ ++/* edma_add_rfs_filter() ++ * Add RFS filter to switch ++ */ ++static int edma_add_rfs_filter(struct edma_adapter *adapter, ++ struct flow_keys *keys, u16 rq, ++ struct edma_rfs_filter_node *filter_node) ++{ ++ int res = -1; ++ ++ struct flow_keys *dest_keys = &filter_node->keys; ++ ++ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys)); ++/* ++ dest_keys->control = keys->control; ++ dest_keys->basic = keys->basic; ++ dest_keys->addrs = keys->addrs; ++ dest_keys->ports = keys->ports; ++ dest_keys.ip_proto = keys->ip_proto; ++*/ ++ /* Call callback registered by ESS driver */ ++ if (likely(adapter->set_rfs_rule)) ++ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys), ++ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst, ++ keys->basic.ip_proto, rq, 1); ++ ++ return res; ++} ++ ++/* edma_rfs_key_search() ++ * Look for existing RFS entry ++ */ ++static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h, ++ struct flow_keys *key) ++{ ++ struct edma_rfs_filter_node *p; ++ ++ hlist_for_each_entry(p, h, node) ++ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) && ++ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) && ++ p->keys.ports.src == key->ports.src && ++ p->keys.ports.dst == key->ports.dst && ++ p->keys.basic.ip_proto == key->basic.ip_proto) ++ return p; ++ return NULL; ++} ++ ++/* edma_initialise_rfs_flow_table() ++ * Initialise EDMA RFS flow table ++ */ ++static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter) ++{ ++ int i; ++ ++ spin_lock_init(&adapter->rfs.rfs_ftab_lock); ++ ++ /* Initialize EDMA flow hash table */ ++ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) ++ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]); ++ ++ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES; ++ adapter->rfs.filter_available = adapter->rfs.max_num_filter; ++ adapter->rfs.hashtoclean = 0; ++ ++ /* Add timer to get periodic RFS updates from OS */ ++ init_timer(&adapter->rfs.expire_rfs); ++ adapter->rfs.expire_rfs.function = edma_flow_may_expire; ++ adapter->rfs.expire_rfs.data = (unsigned long)adapter; ++ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); ++} ++ ++/* edma_free_rfs_flow_table() ++ * Free EDMA RFS flow table ++ */ ++static void edma_free_rfs_flow_table(struct edma_adapter *adapter) ++{ ++ int i; ++ ++ /* Remove sync timer */ ++ del_timer_sync(&adapter->rfs.expire_rfs); ++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); ++ ++ /* Free EDMA RFS table entries */ ++ adapter->rfs.filter_available = 0; ++ ++ /* Clean-up EDMA flow hash table */ ++ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) { ++ struct hlist_head *hhead; ++ struct hlist_node *tmp; ++ struct edma_rfs_filter_node *filter_node; ++ int res; ++ ++ hhead = &adapter->rfs.hlist_head[i]; ++ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) { ++ res = edma_delete_rfs_filter(adapter, filter_node); ++ if (res < 0) ++ dev_warn(&adapter->netdev->dev, ++ "EDMA going down but RFS entry %d not allowed to be flushed by Switch", ++ filter_node->flow_id); ++ hlist_del(&filter_node->node); ++ kfree(filter_node); ++ } ++ } ++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); ++} ++ ++/* edma_tx_unmap_and_free() ++ * clean TX buffer ++ */ ++static inline void edma_tx_unmap_and_free(struct platform_device *pdev, ++ struct edma_sw_desc *sw_desc) ++{ ++ struct sk_buff *skb = sw_desc->skb; ++ ++ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) || ++ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST))) ++ /* unmap_single for skb head area */ ++ dma_unmap_single(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_TO_DEVICE); ++ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG) ++ /* unmap page for paged fragments */ ++ dma_unmap_page(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_TO_DEVICE); ++ ++ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST)) ++ dev_kfree_skb_any(skb); ++ ++ sw_desc->flags = 0; ++} ++ ++/* edma_tx_complete() ++ * Used to clean tx queues and update hardware and consumer index ++ */ ++static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id) ++{ ++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; ++ struct edma_sw_desc *sw_desc; ++ struct platform_device *pdev = edma_cinfo->pdev; ++ int i; ++ ++ u16 sw_next_to_clean = etdr->sw_next_to_clean; ++ u16 hw_next_to_clean; ++ u32 data = 0; ++ ++ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data); ++ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK; ++ ++ /* clean the buffer here */ ++ while (sw_next_to_clean != hw_next_to_clean) { ++ sw_desc = &etdr->sw_desc[sw_next_to_clean]; ++ edma_tx_unmap_and_free(pdev, sw_desc); ++ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1); ++ } ++ ++ etdr->sw_next_to_clean = sw_next_to_clean; ++ ++ /* update the TPD consumer index register */ ++ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean); ++ ++ /* Wake the queue if queue is stopped and netdev link is up */ ++ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) { ++ if (netif_tx_queue_stopped(etdr->nq[i])) { ++ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i])) ++ netif_tx_wake_queue(etdr->nq[i]); ++ } ++ } ++} ++ ++/* edma_get_tx_buffer() ++ * Get sw_desc corresponding to the TPD ++ */ ++static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo, ++ struct edma_tx_desc *tpd, int queue_id) ++{ ++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; ++ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc]; ++} ++ ++/* edma_get_next_tpd() ++ * Return a TPD descriptor for transfer ++ */ ++static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo, ++ int queue_id) ++{ ++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; ++ u16 sw_next_to_fill = etdr->sw_next_to_fill; ++ struct edma_tx_desc *tpd_desc = ++ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]); ++ ++ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1); ++ ++ return tpd_desc; ++} ++ ++/* edma_tpd_available() ++ * Check number of free TPDs ++ */ ++static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo, ++ int queue_id) ++{ ++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; ++ ++ u16 sw_next_to_fill; ++ u16 sw_next_to_clean; ++ u16 count = 0; ++ ++ sw_next_to_clean = etdr->sw_next_to_clean; ++ sw_next_to_fill = etdr->sw_next_to_fill; ++ ++ if (likely(sw_next_to_clean <= sw_next_to_fill)) ++ count = etdr->count; ++ ++ return count + sw_next_to_clean - sw_next_to_fill - 1; ++} ++ ++/* edma_tx_queue_get() ++ * Get the starting number of the queue ++ */ ++static inline int edma_tx_queue_get(struct edma_adapter *adapter, ++ struct sk_buff *skb, int txq_id) ++{ ++ /* skb->priority is used as an index to skb priority table ++ * and based on packet priority, correspong queue is assigned. ++ */ ++ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb); ++} ++ ++/* edma_tx_update_hw_idx() ++ * update the producer index for the ring transmitted ++ */ ++static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo, ++ struct sk_buff *skb, int queue_id) ++{ ++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id]; ++ u32 tpd_idx_data; ++ ++ /* Read and update the producer index */ ++ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data); ++ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS; ++ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK) ++ << EDMA_TPD_PROD_IDX_SHIFT; ++ ++ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data); ++} ++ ++/* edma_rollback_tx() ++ * Function to retrieve tx resources in case of error ++ */ ++static void edma_rollback_tx(struct edma_adapter *adapter, ++ struct edma_tx_desc *start_tpd, int queue_id) ++{ ++ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id]; ++ struct edma_sw_desc *sw_desc; ++ struct edma_tx_desc *tpd = NULL; ++ u16 start_index, index; ++ ++ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc); ++ ++ index = start_index; ++ while (index != etdr->sw_next_to_fill) { ++ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]); ++ sw_desc = &etdr->sw_desc[index]; ++ edma_tx_unmap_and_free(adapter->pdev, sw_desc); ++ memset(tpd, 0, sizeof(struct edma_tx_desc)); ++ if (++index == etdr->count) ++ index = 0; ++ } ++ etdr->sw_next_to_fill = start_index; ++} ++ ++/* edma_tx_map_and_fill() ++ * gets called from edma_xmit_frame ++ * ++ * This is where the dma of the buffer to be transmitted ++ * gets mapped ++ */ ++static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo, ++ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id, ++ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap, ++ bool packet_is_rstp, int nr_frags) ++{ ++ struct edma_sw_desc *sw_desc = NULL; ++ struct platform_device *pdev = edma_cinfo->pdev; ++ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL; ++ struct sk_buff *iter_skb; ++ int i = 0; ++ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0; ++ u16 buf_len, lso_desc_len = 0; ++ ++ /* It should either be a nr_frags skb or fraglist skb but not both */ ++ BUG_ON(nr_frags && skb_has_frag_list(skb)); ++ ++ if (skb_is_gso(skb)) { ++ /* TODO: What additional checks need to be performed here */ ++ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { ++ lso_word1 |= EDMA_TPD_IPV4_EN; ++ ip_hdr(skb)->check = 0; ++ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, ++ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); ++ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) { ++ lso_word1 |= EDMA_TPD_LSO_V2_EN; ++ ipv6_hdr(skb)->payload_len = 0; ++ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, ++ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); ++ } else ++ return -EINVAL; ++ ++ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) | ++ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT); ++ } else if (flags_transmit & EDMA_HW_CHECKSUM) { ++ u8 css, cso; ++ cso = skb_checksum_start_offset(skb); ++ css = cso + skb->csum_offset; ++ ++ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN); ++ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT; ++ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT); ++ } ++ ++ if (skb->protocol == htons(ETH_P_PPP_SES)) ++ word1 |= EDMA_TPD_PPPOE_EN; ++ ++ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) { ++ switch(skb->vlan_proto) { ++ case htons(ETH_P_8021Q): ++ word3 |= (1 << EDMA_TX_INS_CVLAN); ++ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT; ++ break; ++ case htons(ETH_P_8021AD): ++ word1 |= (1 << EDMA_TX_INS_SVLAN); ++ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT; ++ break; ++ default: ++ dev_err(&pdev->dev, "no ctag or stag present\n"); ++ goto vlan_tag_error; ++ } ++ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) { ++ word3 |= (1 << EDMA_TX_INS_CVLAN); ++ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT; ++ } ++ ++ if (packet_is_rstp) { ++ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; ++ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT; ++ } else { ++ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT; ++ } ++ ++ buf_len = skb_headlen(skb); ++ ++ if (lso_word1) { ++ if (lso_word1 & EDMA_TPD_LSO_V2_EN) { ++ ++ /* IPv6 LSOv2 descriptor */ ++ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id); ++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE; ++ ++ /* LSOv2 descriptor overrides addr field to pass length */ ++ tpd->addr = cpu_to_le16(skb->len); ++ tpd->svlan_tag = svlan_tag; ++ tpd->word1 = word1 | lso_word1; ++ tpd->word3 = word3; ++ } ++ ++ tpd = edma_get_next_tpd(edma_cinfo, queue_id); ++ if (!start_tpd) ++ start_tpd = tpd; ++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); ++ ++ /* The last buffer info contain the skb address, ++ * so skb will be freed after unmap ++ */ ++ sw_desc->length = lso_desc_len; ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; ++ ++ sw_desc->dma = dma_map_single(&adapter->pdev->dev, ++ skb->data, buf_len, DMA_TO_DEVICE); ++ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) ++ goto dma_error; ++ ++ tpd->addr = cpu_to_le32(sw_desc->dma); ++ tpd->len = cpu_to_le16(buf_len); ++ ++ tpd->svlan_tag = svlan_tag; ++ tpd->word1 = word1 | lso_word1; ++ tpd->word3 = word3; ++ ++ /* The last buffer info contain the skb address, ++ * so it will be freed after unmap ++ */ ++ sw_desc->length = lso_desc_len; ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; ++ ++ buf_len = 0; ++ } ++ ++ if (likely(buf_len)) { ++ ++ /* TODO Do not dequeue descriptor if there is a potential error */ ++ tpd = edma_get_next_tpd(edma_cinfo, queue_id); ++ ++ if (!start_tpd) ++ start_tpd = tpd; ++ ++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); ++ ++ /* The last buffer info contain the skb address, ++ * so it will be free after unmap ++ */ ++ sw_desc->length = buf_len; ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD; ++ sw_desc->dma = dma_map_single(&adapter->pdev->dev, ++ skb->data, buf_len, DMA_TO_DEVICE); ++ if (dma_mapping_error(&pdev->dev, sw_desc->dma)) ++ goto dma_error; ++ ++ tpd->addr = cpu_to_le32(sw_desc->dma); ++ tpd->len = cpu_to_le16(buf_len); ++ ++ tpd->svlan_tag = svlan_tag; ++ tpd->word1 = word1 | lso_word1; ++ tpd->word3 = word3; ++ } ++ ++ /* Walk through all paged fragments */ ++ while (nr_frags--) { ++ skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; ++ buf_len = skb_frag_size(frag); ++ tpd = edma_get_next_tpd(edma_cinfo, queue_id); ++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); ++ sw_desc->length = buf_len; ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG; ++ ++ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE); ++ ++ if (dma_mapping_error(NULL, sw_desc->dma)) ++ goto dma_error; ++ ++ tpd->addr = cpu_to_le32(sw_desc->dma); ++ tpd->len = cpu_to_le16(buf_len); ++ ++ tpd->svlan_tag = svlan_tag; ++ tpd->word1 = word1 | lso_word1; ++ tpd->word3 = word3; ++ i++; ++ } ++ ++ /* Walk through all fraglist skbs */ ++ skb_walk_frags(skb, iter_skb) { ++ buf_len = iter_skb->len; ++ tpd = edma_get_next_tpd(edma_cinfo, queue_id); ++ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id); ++ sw_desc->length = buf_len; ++ sw_desc->dma = dma_map_single(&adapter->pdev->dev, ++ iter_skb->data, buf_len, DMA_TO_DEVICE); ++ ++ if (dma_mapping_error(NULL, sw_desc->dma)) ++ goto dma_error; ++ ++ tpd->addr = cpu_to_le32(sw_desc->dma); ++ tpd->len = cpu_to_le16(buf_len); ++ tpd->svlan_tag = svlan_tag; ++ tpd->word1 = word1 | lso_word1; ++ tpd->word3 = word3; ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST; ++ } ++ ++ if (tpd) ++ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT; ++ ++ sw_desc->skb = skb; ++ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST; ++ ++ return 0; ++ ++dma_error: ++ edma_rollback_tx(adapter, start_tpd, queue_id); ++ dev_err(&pdev->dev, "TX DMA map failed\n"); ++vlan_tag_error: ++ return -ENOMEM; ++} ++ ++/* edma_check_link() ++ * check Link status ++ */ ++static int edma_check_link(struct edma_adapter *adapter) ++{ ++ struct phy_device *phydev = adapter->phydev; ++ ++ if (!(adapter->poll_required)) ++ return __EDMA_LINKUP; ++ ++ if (phydev->link) ++ return __EDMA_LINKUP; ++ ++ return __EDMA_LINKDOWN; ++} ++ ++/* edma_adjust_link() ++ * check for edma link status ++ */ ++void edma_adjust_link(struct net_device *netdev) ++{ ++ int status; ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ struct phy_device *phydev = adapter->phydev; ++ ++ if (!test_bit(__EDMA_UP, &adapter->state_flags)) ++ return; ++ ++ status = edma_check_link(adapter); ++ ++ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) { ++ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed); ++ adapter->link_state = __EDMA_LINKUP; ++ netif_carrier_on(netdev); ++ if (netif_running(netdev)) ++ netif_tx_wake_all_queues(netdev); ++ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) { ++ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name); ++ adapter->link_state = __EDMA_LINKDOWN; ++ netif_carrier_off(netdev); ++ netif_tx_stop_all_queues(netdev); ++ } ++} ++ ++/* edma_get_stats() ++ * Statistics api used to retreive the tx/rx statistics ++ */ ++struct net_device_stats *edma_get_stats(struct net_device *netdev) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ ++ return &adapter->stats; ++} ++ ++/* edma_xmit() ++ * Main api to be called by the core for packet transmission ++ */ ++netdev_tx_t edma_xmit(struct sk_buff *skb, ++ struct net_device *net_dev) ++{ ++ struct edma_adapter *adapter = netdev_priv(net_dev); ++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; ++ struct edma_tx_desc_ring *etdr; ++ u16 from_cpu, dp_bitmap, txq_id; ++ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id; ++ unsigned int flags_transmit = 0; ++ bool packet_is_rstp = false; ++ struct netdev_queue *nq = NULL; ++ ++ if (skb_shinfo(skb)->nr_frags) { ++ nr_frags = skb_shinfo(skb)->nr_frags; ++ num_tpds_needed += nr_frags; ++ } else if (skb_has_frag_list(skb)) { ++ struct sk_buff *iter_skb; ++ ++ skb_walk_frags(skb, iter_skb) ++ num_tpds_needed++; ++ } ++ ++ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) { ++ dev_err(&net_dev->dev, ++ "skb received with fragments %d which is more than %lu", ++ num_tpds_needed, EDMA_MAX_SKB_FRAGS); ++ dev_kfree_skb_any(skb); ++ adapter->stats.tx_errors++; ++ return NETDEV_TX_OK; ++ } ++ ++ if (edma_stp_rstp) { ++ u16 ath_hdr, ath_eth_type; ++ u8 mac_addr[EDMA_ETH_HDR_LEN]; ++ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]); ++ if (ath_eth_type == edma_ath_eth_type) { ++ packet_is_rstp = true; ++ ath_hdr = htons(*(uint16_t *)&skb->data[14]); ++ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK; ++ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT; ++ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN); ++ ++ skb_pull(skb, 4); ++ ++ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN); ++ } ++ } ++ ++ /* this will be one of the 4 TX queues exposed to linux kernel */ ++ txq_id = skb_get_queue_mapping(skb); ++ queue_id = edma_tx_queue_get(adapter, skb, txq_id); ++ etdr = edma_cinfo->tpd_ring[queue_id]; ++ nq = netdev_get_tx_queue(net_dev, txq_id); ++ ++ local_bh_disable(); ++ /* Tx is not handled in bottom half context. Hence, we need to protect ++ * Tx from tasks and bottom half ++ */ ++ ++ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) { ++ /* not enough descriptor, just stop queue */ ++ netif_tx_stop_queue(nq); ++ local_bh_enable(); ++ dev_dbg(&net_dev->dev, "Not enough descriptors available"); ++ edma_cinfo->edma_ethstats.tx_desc_error++; ++ return NETDEV_TX_BUSY; ++ } ++ ++ /* Check and mark VLAN tag offload */ ++ if (skb_vlan_tag_present(skb)) ++ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG; ++ else if (adapter->default_vlan_tag) ++ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG; ++ ++ /* Check and mark checksum offload */ ++ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) ++ flags_transmit |= EDMA_HW_CHECKSUM; ++ ++ /* Map and fill descriptor for Tx */ ++ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id, ++ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags); ++ if (ret) { ++ dev_kfree_skb_any(skb); ++ adapter->stats.tx_errors++; ++ goto netdev_okay; ++ } ++ ++ /* Update SW producer index */ ++ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id); ++ ++ /* update tx statistics */ ++ adapter->stats.tx_packets++; ++ adapter->stats.tx_bytes += skb->len; ++ ++netdev_okay: ++ local_bh_enable(); ++ return NETDEV_TX_OK; ++} ++ ++/* ++ * edma_flow_may_expire() ++ * Timer function called periodically to delete the node ++ */ ++void edma_flow_may_expire(unsigned long data) ++{ ++ struct edma_adapter *adapter = (struct edma_adapter *)data; ++ int j; ++ ++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); ++ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) { ++ struct hlist_head *hhead; ++ struct hlist_node *tmp; ++ struct edma_rfs_filter_node *n; ++ bool res; ++ ++ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++]; ++ hlist_for_each_entry_safe(n, tmp, hhead, node) { ++ res = rps_may_expire_flow(adapter->netdev, n->rq_id, ++ n->flow_id, n->filter_id); ++ if (res) { ++ int ret; ++ ret = edma_delete_rfs_filter(adapter, n); ++ if (ret < 0) ++ dev_dbg(&adapter->netdev->dev, ++ "RFS entry %d not allowed to be flushed by Switch", ++ n->flow_id); ++ else { ++ hlist_del(&n->node); ++ kfree(n); ++ adapter->rfs.filter_available++; ++ } ++ } ++ } ++ } ++ ++ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1); ++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); ++ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4); ++} ++ ++/* edma_rx_flow_steer() ++ * Called by core to to steer the flow to CPU ++ */ ++int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, ++ u16 rxq, u32 flow_id) ++{ ++ struct flow_keys keys; ++ struct edma_rfs_filter_node *filter_node; ++ struct edma_adapter *adapter = netdev_priv(dev); ++ u16 hash_tblid; ++ int res; ++ ++ if (skb->protocol == htons(ETH_P_IPV6)) { ++ dev_err(&adapter->pdev->dev, "IPv6 not supported\n"); ++ res = -EINVAL; ++ goto no_protocol_err; ++ } ++ ++ /* Dissect flow parameters ++ * We only support IPv4 + TCP/UDP ++ */ ++ res = skb_flow_dissect_flow_keys(skb, &keys, 0); ++ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) { ++ res = -EPROTONOSUPPORT; ++ goto no_protocol_err; ++ } ++ ++ /* Check if table entry exists */ ++ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK; ++ ++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); ++ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys); ++ ++ if (filter_node) { ++ if (rxq == filter_node->rq_id) { ++ res = -EEXIST; ++ goto out; ++ } else { ++ res = edma_delete_rfs_filter(adapter, filter_node); ++ if (res < 0) ++ dev_warn(&adapter->netdev->dev, ++ "Cannot steer flow %d to different queue", ++ filter_node->flow_id); ++ else { ++ adapter->rfs.filter_available++; ++ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); ++ if (res < 0) { ++ dev_warn(&adapter->netdev->dev, ++ "Cannot steer flow %d to different queue", ++ filter_node->flow_id); ++ } else { ++ adapter->rfs.filter_available--; ++ filter_node->rq_id = rxq; ++ filter_node->filter_id = res; ++ } ++ } ++ } ++ } else { ++ if (adapter->rfs.filter_available == 0) { ++ res = -EBUSY; ++ goto out; ++ } ++ ++ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC); ++ if (!filter_node) { ++ res = -ENOMEM; ++ goto out; ++ } ++ ++ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node); ++ if (res < 0) { ++ kfree(filter_node); ++ goto out; ++ } ++ ++ adapter->rfs.filter_available--; ++ filter_node->rq_id = rxq; ++ filter_node->filter_id = res; ++ filter_node->flow_id = flow_id; ++ filter_node->keys = keys; ++ INIT_HLIST_NODE(&filter_node->node); ++ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]); ++ } ++ ++out: ++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); ++no_protocol_err: ++ return res; ++} ++ ++/* edma_register_rfs_filter() ++ * Add RFS filter callback ++ */ ++int edma_register_rfs_filter(struct net_device *netdev, ++ set_rfs_filter_callback_t set_filter) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ ++ spin_lock_bh(&adapter->rfs.rfs_ftab_lock); ++ ++ if (adapter->set_rfs_rule) { ++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); ++ return -1; ++ } ++ ++ adapter->set_rfs_rule = set_filter; ++ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock); ++ ++ return 0; ++} ++ ++/* edma_alloc_tx_rings() ++ * Allocate rx rings ++ */ ++int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ int i, err = 0; ++ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { ++ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); ++ if (err) { ++ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++/* edma_free_tx_rings() ++ * Free tx rings ++ */ ++void edma_free_tx_rings(struct edma_common_info *edma_cinfo) ++{ ++ int i; ++ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) ++ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]); ++} ++ ++/* edma_free_tx_resources() ++ * Free buffers associated with tx rings ++ */ ++void edma_free_tx_resources(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_tx_desc_ring *etdr; ++ struct edma_sw_desc *sw_desc; ++ struct platform_device *pdev = edma_cinfo->pdev; ++ int i, j; ++ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { ++ etdr = edma_cinfo->tpd_ring[i]; ++ for (j = 0; j < EDMA_TX_RING_SIZE; j++) { ++ sw_desc = &etdr->sw_desc[j]; ++ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD | ++ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST)) ++ edma_tx_unmap_and_free(pdev, sw_desc); ++ } ++ } ++} ++ ++/* edma_alloc_rx_rings() ++ * Allocate rx rings ++ */ ++int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo) ++{ ++ struct platform_device *pdev = edma_cinfo->pdev; ++ int i, j, err = 0; ++ ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); ++ if (err) { ++ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i); ++ return err; ++ } ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++ ++ return 0; ++} ++ ++/* edma_free_rx_rings() ++ * free rx rings ++ */ ++void edma_free_rx_rings(struct edma_common_info *edma_cinfo) ++{ ++ int i, j; ++ ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]); ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++} ++ ++/* edma_free_queues() ++ * Free the queues allocaated ++ */ ++void edma_free_queues(struct edma_common_info *edma_cinfo) ++{ ++ int i , j; ++ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { ++ if (edma_cinfo->tpd_ring[i]) ++ kfree(edma_cinfo->tpd_ring[i]); ++ edma_cinfo->tpd_ring[i] = NULL; ++ } ++ ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ if (edma_cinfo->rfd_ring[j]) ++ kfree(edma_cinfo->rfd_ring[j]); ++ edma_cinfo->rfd_ring[j] = NULL; ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++ ++ edma_cinfo->num_rx_queues = 0; ++ edma_cinfo->num_tx_queues = 0; ++ ++ return; ++} ++ ++/* edma_free_rx_resources() ++ * Free buffers associated with tx rings ++ */ ++void edma_free_rx_resources(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_rfd_desc_ring *erdr; ++ struct edma_sw_desc *sw_desc; ++ struct platform_device *pdev = edma_cinfo->pdev; ++ int i, j, k; ++ ++ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) { ++ erdr = edma_cinfo->rfd_ring[k]; ++ for (j = 0; j < EDMA_RX_RING_SIZE; j++) { ++ sw_desc = &erdr->sw_desc[j]; ++ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) { ++ dma_unmap_single(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_FROM_DEVICE); ++ edma_clean_rfd(erdr, j); ++ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) { ++ dma_unmap_page(&pdev->dev, sw_desc->dma, ++ sw_desc->length, DMA_FROM_DEVICE); ++ edma_clean_rfd(erdr, j); ++ } ++ } ++ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ ++ } ++} ++ ++/* edma_alloc_queues_tx() ++ * Allocate memory for all rings ++ */ ++int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo) ++{ ++ int i; ++ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { ++ struct edma_tx_desc_ring *etdr; ++ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL); ++ if (!etdr) ++ goto err; ++ etdr->count = edma_cinfo->tx_ring_count; ++ edma_cinfo->tpd_ring[i] = etdr; ++ } ++ ++ return 0; ++err: ++ edma_free_queues(edma_cinfo); ++ return -1; ++} ++ ++/* edma_alloc_queues_rx() ++ * Allocate memory for all rings ++ */ ++int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo) ++{ ++ int i, j; ++ ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ struct edma_rfd_desc_ring *rfd_ring; ++ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring), ++ GFP_KERNEL); ++ if (!rfd_ring) ++ goto err; ++ rfd_ring->count = edma_cinfo->rx_ring_count; ++ edma_cinfo->rfd_ring[j] = rfd_ring; ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++ return 0; ++err: ++ edma_free_queues(edma_cinfo); ++ return -1; ++} ++ ++/* edma_clear_irq_status() ++ * Clear interrupt status ++ */ ++void edma_clear_irq_status() ++{ ++ edma_write_reg(EDMA_REG_RX_ISR, 0xff); ++ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); ++ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff); ++ edma_write_reg(EDMA_REG_WOL_ISR, 0x1); ++}; ++ ++/* edma_configure() ++ * Configure skb, edma interrupts and control register. ++ */ ++int edma_configure(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_hw *hw = &edma_cinfo->hw; ++ u32 intr_modrt_data; ++ u32 intr_ctrl_data = 0; ++ int i, j, ret_count; ++ ++ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data); ++ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT); ++ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT; ++ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data); ++ ++ edma_clear_irq_status(); ++ ++ /* Clear any WOL status */ ++ edma_write_reg(EDMA_REG_WOL_CTRL, 0); ++ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT); ++ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT); ++ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data); ++ edma_configure_tx(edma_cinfo); ++ edma_configure_rx(edma_cinfo); ++ ++ /* Allocate the RX buffer */ ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j]; ++ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j); ++ if (ret_count) { ++ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n"); ++ } ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++ ++ /* Configure descriptor Ring */ ++ edma_init_desc(edma_cinfo); ++ return 0; ++} ++ ++/* edma_irq_enable() ++ * Enable default interrupt generation settings ++ */ ++void edma_irq_enable(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_hw *hw = &edma_cinfo->hw; ++ int i, j; ++ ++ edma_write_reg(EDMA_REG_RX_ISR, 0xff); ++ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) { ++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask); ++ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1); ++ } ++ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) ++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask); ++} ++ ++/* edma_irq_disable() ++ * Disable Interrupt ++ */ ++void edma_irq_disable(struct edma_common_info *edma_cinfo) ++{ ++ int i; ++ ++ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) ++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0); ++ ++ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) ++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0); ++ edma_write_reg(EDMA_REG_MISC_IMR, 0); ++ edma_write_reg(EDMA_REG_WOL_IMR, 0); ++} ++ ++/* edma_free_irqs() ++ * Free All IRQs ++ */ ++void edma_free_irqs(struct edma_adapter *adapter) ++{ ++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; ++ int i, j; ++ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2); ++ ++ for (i = 0; i < CONFIG_NR_CPUS; i++) { ++ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++) ++ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]); ++ ++ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++) ++ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]); ++ } ++} ++ ++/* edma_enable_rx_ctrl() ++ * Enable RX queue control ++ */ ++void edma_enable_rx_ctrl(struct edma_hw *hw) ++{ ++ u32 data; ++ ++ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); ++ data |= EDMA_RXQ_CTRL_EN; ++ edma_write_reg(EDMA_REG_RXQ_CTRL, data); ++} ++ ++ ++/* edma_enable_tx_ctrl() ++ * Enable TX queue control ++ */ ++void edma_enable_tx_ctrl(struct edma_hw *hw) ++{ ++ u32 data; ++ ++ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); ++ data |= EDMA_TXQ_CTRL_TXQ_EN; ++ edma_write_reg(EDMA_REG_TXQ_CTRL, data); ++} ++ ++/* edma_stop_rx_tx() ++ * Disable RX/TQ Queue control ++ */ ++void edma_stop_rx_tx(struct edma_hw *hw) ++{ ++ u32 data; ++ ++ edma_read_reg(EDMA_REG_RXQ_CTRL, &data); ++ data &= ~EDMA_RXQ_CTRL_EN; ++ edma_write_reg(EDMA_REG_RXQ_CTRL, data); ++ edma_read_reg(EDMA_REG_TXQ_CTRL, &data); ++ data &= ~EDMA_TXQ_CTRL_TXQ_EN; ++ edma_write_reg(EDMA_REG_TXQ_CTRL, data); ++} ++ ++/* edma_reset() ++ * Reset the EDMA ++ */ ++int edma_reset(struct edma_common_info *edma_cinfo) ++{ ++ struct edma_hw *hw = &edma_cinfo->hw; ++ ++ edma_irq_disable(edma_cinfo); ++ ++ edma_clear_irq_status(); ++ ++ edma_stop_rx_tx(hw); ++ ++ return 0; ++} ++ ++/* edma_fill_netdev() ++ * Fill netdev for each etdr ++ */ ++int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id, ++ int dev, int txq_id) ++{ ++ struct edma_tx_desc_ring *etdr; ++ int i = 0; ++ ++ etdr = edma_cinfo->tpd_ring[queue_id]; ++ ++ while (etdr->netdev[i]) ++ i++; ++ ++ if (i >= EDMA_MAX_NETDEV_PER_QUEUE) ++ return -1; ++ ++ /* Populate the netdev associated with the tpd ring */ ++ etdr->netdev[i] = edma_netdev[dev]; ++ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id); ++ ++ return 0; ++} ++ ++/* edma_change_mtu() ++ * change the MTU of the NIC. ++ */ ++int edma_change_mtu(struct net_device *netdev, int new_mtu) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; ++ int old_mtu = netdev->mtu; ++ int max_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + (2 * VLAN_HLEN); ++ ++ if ((max_frame_size < ETH_ZLEN + ETH_FCS_LEN) || ++ (max_frame_size > EDMA_MAX_JUMBO_FRAME_SIZE)) { ++ dev_err(&edma_cinfo->pdev->dev, "MTU setting not correct\n"); ++ return -EINVAL; ++ } ++ ++ /* set MTU */ ++ if (old_mtu != new_mtu) { ++ netdev->mtu = new_mtu; ++ netdev_update_features(netdev); ++ } ++ ++ return 0; ++} ++ ++/* edma_set_mac() ++ * Change the Ethernet Address of the NIC ++ */ ++int edma_set_mac_addr(struct net_device *netdev, void *p) ++{ ++ struct sockaddr *addr = p; ++ ++ if (!is_valid_ether_addr(addr->sa_data)) ++ return -EINVAL; ++ ++ if (netif_running(netdev)) ++ return -EBUSY; ++ ++ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); ++ return 0; ++} ++ ++/* edma_set_stp_rstp() ++ * set stp/rstp ++ */ ++void edma_set_stp_rstp(bool rstp) ++{ ++ edma_stp_rstp = rstp; ++} ++ ++/* edma_assign_ath_hdr_type() ++ * assign atheros header eth type ++ */ ++void edma_assign_ath_hdr_type(int eth_type) ++{ ++ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK; ++} ++ ++/* edma_get_default_vlan_tag() ++ * Used by other modules to get the default vlan tag ++ */ ++int edma_get_default_vlan_tag(struct net_device *netdev) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ ++ if (adapter->default_vlan_tag) ++ return adapter->default_vlan_tag; ++ ++ return 0; ++} ++ ++/* edma_open() ++ * gets called when netdevice is up, start the queue. ++ */ ++int edma_open(struct net_device *netdev) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ struct platform_device *pdev = adapter->edma_cinfo->pdev; ++ ++ netif_tx_start_all_queues(netdev); ++ edma_initialise_rfs_flow_table(adapter); ++ set_bit(__EDMA_UP, &adapter->state_flags); ++ ++ /* if Link polling is enabled, in our case enabled for WAN, then ++ * do a phy start, else always set link as UP ++ */ ++ if (adapter->poll_required) { ++ if (!IS_ERR(adapter->phydev)) { ++ phy_start(adapter->phydev); ++ phy_start_aneg(adapter->phydev); ++ adapter->link_state = __EDMA_LINKDOWN; ++ } else { ++ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n"); ++ } ++ } else { ++ adapter->link_state = __EDMA_LINKUP; ++ netif_carrier_on(netdev); ++ } ++ ++ return 0; ++} ++ ++ ++/* edma_close() ++ * gets called when netdevice is down, stops the queue. ++ */ ++int edma_close(struct net_device *netdev) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ ++ edma_free_rfs_flow_table(adapter); ++ netif_carrier_off(netdev); ++ netif_tx_stop_all_queues(netdev); ++ ++ if (adapter->poll_required) { ++ if (!IS_ERR(adapter->phydev)) ++ phy_stop(adapter->phydev); ++ } ++ ++ adapter->link_state = __EDMA_LINKDOWN; ++ ++ /* Set GMAC state to UP before link state is checked ++ */ ++ clear_bit(__EDMA_UP, &adapter->state_flags); ++ ++ return 0; ++} ++ ++/* edma_poll ++ * polling function that gets called when the napi gets scheduled. ++ * ++ * Main sequence of task performed in this api ++ * is clear irq status -> clear_tx_irq -> clean_rx_irq-> ++ * enable interrupts. ++ */ ++int edma_poll(struct napi_struct *napi, int budget) ++{ ++ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi, ++ struct edma_per_cpu_queues_info, napi); ++ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; ++ u32 reg_data; ++ u32 shadow_rx_status, shadow_tx_status; ++ int queue_id; ++ int i, work_done = 0; ++ ++ /* Store the Rx/Tx status by ANDing it with ++ * appropriate CPU RX?TX mask ++ */ ++ edma_read_reg(EDMA_REG_RX_ISR, ®_data); ++ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask; ++ shadow_rx_status = edma_percpu_info->rx_status; ++ edma_read_reg(EDMA_REG_TX_ISR, ®_data); ++ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask; ++ shadow_tx_status = edma_percpu_info->tx_status; ++ ++ /* Every core will have a start, which will be computed ++ * in probe and stored in edma_percpu_info->tx_start variable. ++ * We will shift the status bit by tx_start to obtain ++ * status bits for the core on which the current processing ++ * is happening. Since, there are 4 tx queues per core, ++ * we will run the loop till we get the correct queue to clear. ++ */ ++ while (edma_percpu_info->tx_status) { ++ queue_id = ffs(edma_percpu_info->tx_status) - 1; ++ edma_tx_complete(edma_cinfo, queue_id); ++ edma_percpu_info->tx_status &= ~(1 << queue_id); ++ } ++ ++ /* Every core will have a start, which will be computed ++ * in probe and stored in edma_percpu_info->tx_start variable. ++ * We will shift the status bit by tx_start to obtain ++ * status bits for the core on which the current processing ++ * is happening. Since, there are 4 tx queues per core, we ++ * will run the loop till we get the correct queue to clear. ++ */ ++ while (edma_percpu_info->rx_status) { ++ queue_id = ffs(edma_percpu_info->rx_status) - 1; ++ edma_rx_complete(edma_cinfo, &work_done, ++ budget, queue_id, napi); ++ ++ if (likely(work_done < budget)) ++ edma_percpu_info->rx_status &= ~(1 << queue_id); ++ else ++ break; ++ } ++ ++ /* Clear the status register, to avoid the interrupts to ++ * reoccur.This clearing of interrupt status register is ++ * done here as writing to status register only takes place ++ * once the producer/consumer index has been updated to ++ * reflect that the packet transmission/reception went fine. ++ */ ++ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status); ++ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status); ++ ++ /* If budget not fully consumed, exit the polling mode */ ++ if (likely(work_done < budget)) { ++ napi_complete(napi); ++ ++ /* re-enable the interrupts */ ++ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) ++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1); ++ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) ++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1); ++ } ++ ++ return work_done; ++} ++ ++/* edma interrupt() ++ * interrupt handler ++ */ ++irqreturn_t edma_interrupt(int irq, void *dev) ++{ ++ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev; ++ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo; ++ int i; ++ ++ /* Unmask the TX/RX interrupt register */ ++ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++) ++ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0); ++ ++ for (i = 0; i < edma_cinfo->num_txq_per_core; i++) ++ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0); ++ ++ napi_schedule(&edma_percpu_info->napi); ++ ++ return IRQ_HANDLED; ++} +--- /dev/null ++++ b/drivers/net/ethernet/qualcomm/essedma/edma.h +@@ -0,0 +1,447 @@ ++/* ++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for ++ * any purpose with or without fee is hereby granted, provided that the ++ * above copyright notice and this permission notice appear in all copies. ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT ++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#ifndef _EDMA_H_ ++#define _EDMA_H_ ++ ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/module.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++#include <linux/io.h> ++#include <linux/vmalloc.h> ++#include <linux/pagemap.h> ++#include <linux/smp.h> ++#include <linux/platform_device.h> ++#include <linux/of.h> ++#include <linux/of_device.h> ++#include <linux/kernel.h> ++#include <linux/device.h> ++#include <linux/sysctl.h> ++#include <linux/phy.h> ++#include <linux/of_net.h> ++#include <net/checksum.h> ++#include <net/ip6_checksum.h> ++#include <asm-generic/bug.h> ++#include "ess_edma.h" ++ ++#define EDMA_CPU_CORES_SUPPORTED 4 ++#define EDMA_MAX_PORTID_SUPPORTED 5 ++#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED ++#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1) ++#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */ ++#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */ ++ ++#define EDMA_MAX_RECEIVE_QUEUE 8 ++#define EDMA_MAX_TRANSMIT_QUEUE 16 ++ ++/* WAN/LAN adapter number */ ++#define EDMA_WAN 0 ++#define EDMA_LAN 1 ++ ++/* VLAN tag */ ++#define EDMA_LAN_DEFAULT_VLAN 1 ++#define EDMA_WAN_DEFAULT_VLAN 2 ++ ++#define EDMA_DEFAULT_GROUP1_VLAN 1 ++#define EDMA_DEFAULT_GROUP2_VLAN 2 ++#define EDMA_DEFAULT_GROUP3_VLAN 3 ++#define EDMA_DEFAULT_GROUP4_VLAN 4 ++#define EDMA_DEFAULT_GROUP5_VLAN 5 ++ ++/* Queues exposed to linux kernel */ ++#define EDMA_NETDEV_TX_QUEUE 4 ++#define EDMA_NETDEV_RX_QUEUE 4 ++ ++/* Number of queues per core */ ++#define EDMA_NUM_TXQ_PER_CORE 4 ++#define EDMA_NUM_RXQ_PER_CORE 2 ++ ++#define EDMA_TPD_EOP_SHIFT 31 ++ ++#define EDMA_PORT_ID_SHIFT 12 ++#define EDMA_PORT_ID_MASK 0x7 ++ ++/* tpd word 3 bit 18-28 */ ++#define EDMA_TPD_PORT_BITMAP_SHIFT 18 ++ ++#define EDMA_TPD_FROM_CPU_SHIFT 25 ++ ++#define EDMA_FROM_CPU_MASK 0x80 ++#define EDMA_SKB_PRIORITY_MASK 0x38 ++ ++/* TX/RX descriptor ring count */ ++/* should be a power of 2 */ ++#define EDMA_RX_RING_SIZE 128 ++#define EDMA_TX_RING_SIZE 128 ++ ++/* Flags used in paged/non paged mode */ ++#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256 ++#define EDMA_RX_HEAD_BUFF_SIZE 1540 ++ ++/* MAX frame size supported by switch */ ++#define EDMA_MAX_JUMBO_FRAME_SIZE 9216 ++ ++/* Configurations */ ++#define EDMA_INTR_CLEAR_TYPE 0 ++#define EDMA_INTR_SW_IDX_W_TYPE 0 ++#define EDMA_FIFO_THRESH_TYPE 0 ++#define EDMA_RSS_TYPE 0 ++#define EDMA_RX_IMT 0x0020 ++#define EDMA_TX_IMT 0x0050 ++#define EDMA_TPD_BURST 5 ++#define EDMA_TXF_BURST 0x100 ++#define EDMA_RFD_BURST 8 ++#define EDMA_RFD_THR 16 ++#define EDMA_RFD_LTHR 0 ++ ++/* RX/TX per CPU based mask/shift */ ++#define EDMA_TX_PER_CPU_MASK 0xF ++#define EDMA_RX_PER_CPU_MASK 0x3 ++#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2 ++#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1 ++#define EDMA_TX_CPU_START_SHIFT 0x2 ++#define EDMA_RX_CPU_START_SHIFT 0x1 ++ ++/* FLags used in transmit direction */ ++#define EDMA_HW_CHECKSUM 0x00000001 ++#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002 ++#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004 ++ ++#define EDMA_SW_DESC_FLAG_LAST 0x1 ++#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2 ++#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4 ++#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8 ++#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10 ++#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20 ++ ++ ++#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1) ++ ++/* Ethtool specific list of EDMA supported features */ ++#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \ ++ | SUPPORTED_10baseT_Full \ ++ | SUPPORTED_100baseT_Half \ ++ | SUPPORTED_100baseT_Full \ ++ | SUPPORTED_1000baseT_Full) ++ ++/* Recevie side atheros Header */ ++#define EDMA_RX_ATH_HDR_VERSION 0x2 ++#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14 ++#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11 ++#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6 ++#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4 ++ ++/* Transmit side atheros Header */ ++#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F ++#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80 ++#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7 ++ ++#define EDMA_TXQ_START_CORE0 8 ++#define EDMA_TXQ_START_CORE1 12 ++#define EDMA_TXQ_START_CORE2 0 ++#define EDMA_TXQ_START_CORE3 4 ++ ++#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00 ++#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000 ++#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F ++#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0 ++ ++#define EDMA_ETH_HDR_LEN 12 ++#define EDMA_ETH_TYPE_MASK 0xFFFF ++ ++#define EDMA_RX_BUFFER_WRITE 16 ++#define EDMA_RFD_AVAIL_THR 80 ++ ++#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR ++ ++extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst, ++ __be16 sport, __be16 dport, ++ uint8_t proto, u16 loadbalance, bool action); ++struct edma_ethtool_statistics { ++ u32 tx_q0_pkt; ++ u32 tx_q1_pkt; ++ u32 tx_q2_pkt; ++ u32 tx_q3_pkt; ++ u32 tx_q4_pkt; ++ u32 tx_q5_pkt; ++ u32 tx_q6_pkt; ++ u32 tx_q7_pkt; ++ u32 tx_q8_pkt; ++ u32 tx_q9_pkt; ++ u32 tx_q10_pkt; ++ u32 tx_q11_pkt; ++ u32 tx_q12_pkt; ++ u32 tx_q13_pkt; ++ u32 tx_q14_pkt; ++ u32 tx_q15_pkt; ++ u32 tx_q0_byte; ++ u32 tx_q1_byte; ++ u32 tx_q2_byte; ++ u32 tx_q3_byte; ++ u32 tx_q4_byte; ++ u32 tx_q5_byte; ++ u32 tx_q6_byte; ++ u32 tx_q7_byte; ++ u32 tx_q8_byte; ++ u32 tx_q9_byte; ++ u32 tx_q10_byte; ++ u32 tx_q11_byte; ++ u32 tx_q12_byte; ++ u32 tx_q13_byte; ++ u32 tx_q14_byte; ++ u32 tx_q15_byte; ++ u32 rx_q0_pkt; ++ u32 rx_q1_pkt; ++ u32 rx_q2_pkt; ++ u32 rx_q3_pkt; ++ u32 rx_q4_pkt; ++ u32 rx_q5_pkt; ++ u32 rx_q6_pkt; ++ u32 rx_q7_pkt; ++ u32 rx_q0_byte; ++ u32 rx_q1_byte; ++ u32 rx_q2_byte; ++ u32 rx_q3_byte; ++ u32 rx_q4_byte; ++ u32 rx_q5_byte; ++ u32 rx_q6_byte; ++ u32 rx_q7_byte; ++ u32 tx_desc_error; ++}; ++ ++struct edma_mdio_data { ++ struct mii_bus *mii_bus; ++ void __iomem *membase; ++ int phy_irq[PHY_MAX_ADDR]; ++}; ++ ++/* EDMA LINK state */ ++enum edma_link_state { ++ __EDMA_LINKUP, /* Indicate link is UP */ ++ __EDMA_LINKDOWN /* Indicate link is down */ ++}; ++ ++/* EDMA GMAC state */ ++enum edma_gmac_state { ++ __EDMA_UP /* use to indicate GMAC is up */ ++}; ++ ++/* edma transmit descriptor */ ++struct edma_tx_desc { ++ __le16 len; /* full packet including CRC */ ++ __le16 svlan_tag; /* vlan tag */ ++ __le32 word1; /* byte 4-7 */ ++ __le32 addr; /* address of buffer */ ++ __le32 word3; /* byte 12 */ ++}; ++ ++/* edma receive return descriptor */ ++struct edma_rx_return_desc { ++ u16 rrd0; ++ u16 rrd1; ++ u16 rrd2; ++ u16 rrd3; ++ u16 rrd4; ++ u16 rrd5; ++ u16 rrd6; ++ u16 rrd7; ++}; ++ ++/* RFD descriptor */ ++struct edma_rx_free_desc { ++ __le32 buffer_addr; /* buffer address */ ++}; ++ ++/* edma hw specific data */ ++struct edma_hw { ++ u32 __iomem *hw_addr; /* inner register address */ ++ struct edma_adapter *adapter; /* netdevice adapter */ ++ u32 rx_intr_mask; /*rx interrupt mask */ ++ u32 tx_intr_mask; /* tx interrupt nask */ ++ u32 misc_intr_mask; /* misc interrupt mask */ ++ u32 wol_intr_mask; /* wake on lan interrupt mask */ ++ bool intr_clear_type; /* interrupt clear */ ++ bool intr_sw_idx_w; /* interrupt software index */ ++ u32 rx_head_buff_size; /* Rx buffer size */ ++ u8 rss_type; /* rss protocol type */ ++}; ++ ++/* edma_sw_desc stores software descriptor ++ * SW descriptor has 1:1 map with HW descriptor ++ */ ++struct edma_sw_desc { ++ struct sk_buff *skb; ++ dma_addr_t dma; /* dma address */ ++ u16 length; /* Tx/Rx buffer length */ ++ u32 flags; ++}; ++ ++/* per core related information */ ++struct edma_per_cpu_queues_info { ++ struct napi_struct napi; /* napi associated with the core */ ++ u32 tx_mask; /* tx interrupt mask */ ++ u32 rx_mask; /* rx interrupt mask */ ++ u32 tx_status; /* tx interrupt status */ ++ u32 rx_status; /* rx interrupt status */ ++ u32 tx_start; /* tx queue start */ ++ u32 rx_start; /* rx queue start */ ++ struct edma_common_info *edma_cinfo; /* edma common info */ ++}; ++ ++/* edma specific common info */ ++struct edma_common_info { ++ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */ ++ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */ ++ struct platform_device *pdev; /* device structure */ ++ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED]; ++ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX]; ++ struct ctl_table_header *edma_ctl_table_hdr; ++ int num_gmac; ++ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */ ++ int num_rx_queues; /* number of rx queue */ ++ u32 num_tx_queues; /* number of tx queue */ ++ u32 tx_irq[16]; /* number of tx irq */ ++ u32 rx_irq[8]; /* number of rx irq */ ++ u32 from_cpu; /* from CPU TPD field */ ++ u32 num_rxq_per_core; /* Rx queues per core */ ++ u32 num_txq_per_core; /* Tx queues per core */ ++ u16 tx_ring_count; /* Tx ring count */ ++ u16 rx_ring_count; /* Rx ring*/ ++ u16 rx_head_buffer_len; /* rx buffer length */ ++ u16 rx_page_buffer_len; /* rx buffer length */ ++ u32 page_mode; /* Jumbo frame supported flag */ ++ u32 fraglist_mode; /* fraglist supported flag */ ++ struct edma_hw hw; /* edma hw specific structure */ ++ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */ ++ spinlock_t stats_lock; /* protect edma stats area for updation */ ++}; ++ ++/* transimit packet descriptor (tpd) ring */ ++struct edma_tx_desc_ring { ++ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */ ++ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE]; ++ /* Array of netdevs associated with the tpd ring */ ++ void *hw_desc; /* descriptor ring virtual address */ ++ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ ++ int netdev_bmp; /* Bitmap for per-ring netdevs */ ++ u32 size; /* descriptor ring length in bytes */ ++ u16 count; /* number of descriptors in the ring */ ++ dma_addr_t dma; /* descriptor ring physical address */ ++ u16 sw_next_to_fill; /* next Tx descriptor to fill */ ++ u16 sw_next_to_clean; /* next Tx descriptor to clean */ ++}; ++ ++/* receive free descriptor (rfd) ring */ ++struct edma_rfd_desc_ring { ++ void *hw_desc; /* descriptor ring virtual address */ ++ struct edma_sw_desc *sw_desc; /* buffer associated with ring */ ++ u16 size; /* bytes allocated to sw_desc */ ++ u16 count; /* number of descriptors in the ring */ ++ dma_addr_t dma; /* descriptor ring physical address */ ++ u16 sw_next_to_fill; /* next descriptor to fill */ ++ u16 sw_next_to_clean; /* next descriptor to clean */ ++}; ++ ++/* edma_rfs_flter_node - rfs filter node in hash table */ ++struct edma_rfs_filter_node { ++ struct flow_keys keys; ++ u32 flow_id; /* flow_id of filter provided by kernel */ ++ u16 filter_id; /* filter id of filter returned by adaptor */ ++ u16 rq_id; /* desired rq index */ ++ struct hlist_node node; /* edma rfs list node */ ++}; ++ ++/* edma_rfs_flow_tbl - rfs flow table */ ++struct edma_rfs_flow_table { ++ u16 max_num_filter; /* Maximum number of filters edma supports */ ++ u16 hashtoclean; /* hash table index to clean next */ ++ int filter_available; /* Number of free filters available */ ++ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES]; ++ spinlock_t rfs_ftab_lock; ++ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */ ++}; ++ ++/* EDMA net device structure */ ++struct edma_adapter { ++ struct net_device *netdev; /* netdevice */ ++ struct platform_device *pdev; /* platform device */ ++ struct edma_common_info *edma_cinfo; /* edma common info */ ++ struct phy_device *phydev; /* Phy device */ ++ struct edma_rfs_flow_table rfs; /* edma rfs flow table */ ++ struct net_device_stats stats; /* netdev statistics */ ++ set_rfs_filter_callback_t set_rfs_rule; ++ u32 flags;/* status flags */ ++ unsigned long state_flags; /* GMAC up/down flags */ ++ u32 forced_speed; /* link force speed */ ++ u32 forced_duplex; /* link force duplex */ ++ u32 link_state; /* phy link state */ ++ u32 phy_mdio_addr; /* PHY device address on MII interface */ ++ u32 poll_required; /* check if link polling is required */ ++ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */ ++ u32 default_vlan_tag; /* vlan tag */ ++ u32 dp_bitmap; ++ uint8_t phy_id[MII_BUS_ID_SIZE + 3]; ++}; ++ ++int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo); ++int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo); ++int edma_open(struct net_device *netdev); ++int edma_close(struct net_device *netdev); ++void edma_free_tx_resources(struct edma_common_info *edma_c_info); ++void edma_free_rx_resources(struct edma_common_info *edma_c_info); ++int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo); ++int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo); ++void edma_free_tx_rings(struct edma_common_info *edma_cinfo); ++void edma_free_rx_rings(struct edma_common_info *edma_cinfo); ++void edma_free_queues(struct edma_common_info *edma_cinfo); ++void edma_irq_disable(struct edma_common_info *edma_cinfo); ++int edma_reset(struct edma_common_info *edma_cinfo); ++int edma_poll(struct napi_struct *napi, int budget); ++netdev_tx_t edma_xmit(struct sk_buff *skb, ++ struct net_device *netdev); ++int edma_configure(struct edma_common_info *edma_cinfo); ++void edma_irq_enable(struct edma_common_info *edma_cinfo); ++void edma_enable_tx_ctrl(struct edma_hw *hw); ++void edma_enable_rx_ctrl(struct edma_hw *hw); ++void edma_stop_rx_tx(struct edma_hw *hw); ++void edma_free_irqs(struct edma_adapter *adapter); ++irqreturn_t edma_interrupt(int irq, void *dev); ++void edma_write_reg(u16 reg_addr, u32 reg_value); ++void edma_read_reg(u16 reg_addr, volatile u32 *reg_value); ++struct net_device_stats *edma_get_stats(struct net_device *netdev); ++int edma_set_mac_addr(struct net_device *netdev, void *p); ++int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, ++ u16 rxq, u32 flow_id); ++int edma_register_rfs_filter(struct net_device *netdev, ++ set_rfs_filter_callback_t set_filter); ++void edma_flow_may_expire(unsigned long data); ++void edma_set_ethtool_ops(struct net_device *netdev); ++int edma_change_mtu(struct net_device *netdev, int new_mtu); ++void edma_set_stp_rstp(bool tag); ++void edma_assign_ath_hdr_type(int tag); ++int edma_get_default_vlan_tag(struct net_device *netdev); ++void edma_adjust_link(struct net_device *netdev); ++int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id); ++void edma_read_append_stats(struct edma_common_info *edma_cinfo); ++void edma_change_tx_coalesce(int usecs); ++void edma_change_rx_coalesce(int usecs); ++void edma_get_tx_rx_coalesce(u32 *reg_val); ++void edma_clear_irq_status(void); ++#endif /* _EDMA_H_ */ +--- /dev/null ++++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c +@@ -0,0 +1,1220 @@ ++/* ++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for ++ * any purpose with or without fee is hereby granted, provided that the ++ * above copyright notice and this permission notice appear in all copies. ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT ++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include <linux/cpu_rmap.h> ++#include <linux/of.h> ++#include <linux/of_net.h> ++#include <linux/timer.h> ++#include "edma.h" ++#include "ess_edma.h" ++ ++/* Weight round robin and virtual QID mask */ ++#define EDMA_WRR_VID_SCTL_MASK 0xffff ++ ++/* Weight round robin and virtual QID shift */ ++#define EDMA_WRR_VID_SCTL_SHIFT 16 ++ ++char edma_axi_driver_name[] = "ess_edma"; ++static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | ++ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP; ++ ++static u32 edma_hw_addr; ++ ++struct timer_list edma_stats_timer; ++ ++char edma_tx_irq[16][64]; ++char edma_rx_irq[8][64]; ++struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED]; ++static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1, ++ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3}; ++static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1, ++ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3}; ++ ++static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN; ++static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN; ++static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN; ++static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN; ++static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN; ++static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN; ++static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN; ++static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE; ++static u32 edma_rss_idt_idx; ++ ++static int edma_weight_assigned_to_q __read_mostly; ++static int edma_queue_to_virtual_q __read_mostly; ++static bool edma_enable_rstp __read_mostly; ++static int edma_athr_hdr_eth_type __read_mostly; ++ ++static int page_mode; ++module_param(page_mode, int, 0); ++MODULE_PARM_DESC(page_mode, "enable page mode"); ++ ++static int overwrite_mode; ++module_param(overwrite_mode, int, 0); ++MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting"); ++ ++static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE; ++module_param(jumbo_mru, int, 0); ++MODULE_PARM_DESC(jumbo_mru, "enable fraglist support"); ++ ++static int num_rxq = 4; ++module_param(num_rxq, int, 0); ++MODULE_PARM_DESC(num_rxq, "change the number of rx queues"); ++ ++void edma_write_reg(u16 reg_addr, u32 reg_value) ++{ ++ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr))); ++} ++ ++void edma_read_reg(u16 reg_addr, volatile u32 *reg_value) ++{ ++ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr)); ++} ++ ++/* edma_change_tx_coalesce() ++ * change tx interrupt moderation timer ++ */ ++void edma_change_tx_coalesce(int usecs) ++{ ++ u32 reg_value; ++ ++ /* Here, we right shift the value from the user by 1, this is ++ * done because IMT resolution timer is 2usecs. 1 count ++ * of this register corresponds to 2 usecs. ++ */ ++ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); ++ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16)); ++ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); ++} ++ ++/* edma_change_rx_coalesce() ++ * change rx interrupt moderation timer ++ */ ++void edma_change_rx_coalesce(int usecs) ++{ ++ u32 reg_value; ++ ++ /* Here, we right shift the value from the user by 1, this is ++ * done because IMT resolution timer is 2usecs. 1 count ++ * of this register corresponds to 2 usecs. ++ */ ++ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value); ++ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1)); ++ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value); ++} ++ ++/* edma_get_tx_rx_coalesce() ++ * Get tx/rx interrupt moderation value ++ */ ++void edma_get_tx_rx_coalesce(u32 *reg_val) ++{ ++ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val); ++} ++ ++void edma_read_append_stats(struct edma_common_info *edma_cinfo) ++{ ++ uint32_t *p; ++ int i; ++ u32 stat; ++ ++ spin_lock(&edma_cinfo->stats_lock); ++ p = (uint32_t *)&(edma_cinfo->edma_ethstats); ++ ++ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { ++ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat); ++ *p += stat; ++ p++; ++ } ++ ++ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) { ++ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat); ++ *p += stat; ++ p++; ++ } ++ ++ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { ++ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat); ++ *p += stat; ++ p++; ++ } ++ ++ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) { ++ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat); ++ *p += stat; ++ p++; ++ } ++ ++ spin_unlock(&edma_cinfo->stats_lock); ++} ++ ++static void edma_statistics_timer(unsigned long data) ++{ ++ struct edma_common_info *edma_cinfo = (struct edma_common_info *)data; ++ ++ edma_read_append_stats(edma_cinfo); ++ ++ mod_timer(&edma_stats_timer, jiffies + 1*HZ); ++} ++ ++static int edma_enable_stp_rstp(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ int ret; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ if (write) ++ edma_set_stp_rstp(edma_enable_rstp); ++ ++ return ret; ++} ++ ++static int edma_ath_hdr_eth_type(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ int ret; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ if (write) ++ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type); ++ ++ return ret; ++} ++ ++static int edma_change_default_lan_vlan(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ int ret; ++ ++ if (!edma_netdev[1]) { ++ pr_err("Netdevice for default_lan does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[1]); ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_ltag; ++ ++ return ret; ++} ++ ++static int edma_change_default_wan_vlan(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ int ret; ++ ++ if (!edma_netdev[0]) { ++ pr_err("Netdevice for default_wan does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[0]); ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_wtag; ++ ++ return ret; ++} ++ ++static int edma_change_group1_vtag(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ struct edma_common_info *edma_cinfo; ++ int ret; ++ ++ if (!edma_netdev[0]) { ++ pr_err("Netdevice for Group 1 does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[0]); ++ edma_cinfo = adapter->edma_cinfo; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_group1_vtag; ++ ++ return ret; ++} ++ ++static int edma_change_group2_vtag(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ struct edma_common_info *edma_cinfo; ++ int ret; ++ ++ if (!edma_netdev[1]) { ++ pr_err("Netdevice for Group 2 does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[1]); ++ edma_cinfo = adapter->edma_cinfo; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_group2_vtag; ++ ++ return ret; ++} ++ ++static int edma_change_group3_vtag(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ struct edma_common_info *edma_cinfo; ++ int ret; ++ ++ if (!edma_netdev[2]) { ++ pr_err("Netdevice for Group 3 does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[2]); ++ edma_cinfo = adapter->edma_cinfo; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_group3_vtag; ++ ++ return ret; ++} ++ ++static int edma_change_group4_vtag(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ struct edma_common_info *edma_cinfo; ++ int ret; ++ ++ if (!edma_netdev[3]) { ++ pr_err("Netdevice for Group 4 does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[3]); ++ edma_cinfo = adapter->edma_cinfo; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_group4_vtag; ++ ++ return ret; ++} ++ ++static int edma_change_group5_vtag(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ struct edma_adapter *adapter; ++ struct edma_common_info *edma_cinfo; ++ int ret; ++ ++ if (!edma_netdev[4]) { ++ pr_err("Netdevice for Group 5 does not exist\n"); ++ return -1; ++ } ++ ++ adapter = netdev_priv(edma_netdev[4]); ++ edma_cinfo = adapter->edma_cinfo; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ ++ if (write) ++ adapter->default_vlan_tag = edma_default_group5_vtag; ++ ++ return ret; ++} ++ ++static int edma_set_rss_idt_value(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ int ret; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ if (write && !ret) ++ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx), ++ edma_rss_idt_val); ++ return ret; ++} ++ ++static int edma_set_rss_idt_idx(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ int ret; ++ u32 old_value = edma_rss_idt_idx; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ if (!write || ret) ++ return ret; ++ ++ if (edma_rss_idt_idx >= EDMA_NUM_IDT) { ++ pr_err("Invalid RSS indirection table index %d\n", ++ edma_rss_idt_idx); ++ edma_rss_idt_idx = old_value; ++ return -EINVAL; ++ } ++ return ret; ++} ++ ++static int edma_weight_assigned_to_queues(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ int ret, queue_id, weight; ++ u32 reg_data, data, reg_addr; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ if (write) { ++ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK; ++ if (queue_id < 0 || queue_id > 15) { ++ pr_err("queue_id not within desired range\n"); ++ return -EINVAL; ++ } ++ ++ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT; ++ if (weight < 0 || weight > 0xF) { ++ pr_err("queue_id not within desired range\n"); ++ return -EINVAL; ++ } ++ ++ data = weight << EDMA_WRR_SHIFT(queue_id); ++ ++ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3); ++ edma_read_reg(reg_addr, ®_data); ++ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id)); ++ edma_write_reg(reg_addr, data | reg_data); ++ } ++ ++ return ret; ++} ++ ++static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write, ++ void __user *buffer, size_t *lenp, ++ loff_t *ppos) ++{ ++ int ret, queue_id, virtual_qid; ++ u32 reg_data, data, reg_addr; ++ ++ ret = proc_dointvec(table, write, buffer, lenp, ppos); ++ if (write) { ++ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK; ++ if (queue_id < 0 || queue_id > 15) { ++ pr_err("queue_id not within desired range\n"); ++ return -EINVAL; ++ } ++ ++ virtual_qid = edma_queue_to_virtual_q >> ++ EDMA_WRR_VID_SCTL_SHIFT; ++ if (virtual_qid < 0 || virtual_qid > 8) { ++ pr_err("queue_id not within desired range\n"); ++ return -EINVAL; ++ } ++ ++ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id); ++ ++ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3); ++ edma_read_reg(reg_addr, ®_data); ++ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id)); ++ edma_write_reg(reg_addr, data | reg_data); ++ } ++ ++ return ret; ++} ++ ++static struct ctl_table edma_table[] = { ++ { ++ .procname = "default_lan_tag", ++ .data = &edma_default_ltag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_default_lan_vlan ++ }, ++ { ++ .procname = "default_wan_tag", ++ .data = &edma_default_wtag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_default_wan_vlan ++ }, ++ { ++ .procname = "weight_assigned_to_queues", ++ .data = &edma_weight_assigned_to_q, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_weight_assigned_to_queues ++ }, ++ { ++ .procname = "queue_to_virtual_queue_map", ++ .data = &edma_queue_to_virtual_q, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_queue_to_virtual_queue_map ++ }, ++ { ++ .procname = "enable_stp_rstp", ++ .data = &edma_enable_rstp, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_enable_stp_rstp ++ }, ++ { ++ .procname = "athr_hdr_eth_type", ++ .data = &edma_athr_hdr_eth_type, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_ath_hdr_eth_type ++ }, ++ { ++ .procname = "default_group1_vlan_tag", ++ .data = &edma_default_group1_vtag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_group1_vtag ++ }, ++ { ++ .procname = "default_group2_vlan_tag", ++ .data = &edma_default_group2_vtag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_group2_vtag ++ }, ++ { ++ .procname = "default_group3_vlan_tag", ++ .data = &edma_default_group3_vtag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_group3_vtag ++ }, ++ { ++ .procname = "default_group4_vlan_tag", ++ .data = &edma_default_group4_vtag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_group4_vtag ++ }, ++ { ++ .procname = "default_group5_vlan_tag", ++ .data = &edma_default_group5_vtag, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_change_group5_vtag ++ }, ++ { ++ .procname = "edma_rss_idt_value", ++ .data = &edma_rss_idt_val, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_set_rss_idt_value ++ }, ++ { ++ .procname = "edma_rss_idt_idx", ++ .data = &edma_rss_idt_idx, ++ .maxlen = sizeof(int), ++ .mode = 0644, ++ .proc_handler = edma_set_rss_idt_idx ++ }, ++ {} ++}; ++ ++/* edma_axi_netdev_ops ++ * Describe the operations supported by registered netdevices ++ * ++ * static const struct net_device_ops edma_axi_netdev_ops = { ++ * .ndo_open = edma_open, ++ * .ndo_stop = edma_close, ++ * .ndo_start_xmit = edma_xmit_frame, ++ * .ndo_set_mac_address = edma_set_mac_addr, ++ * } ++ */ ++static const struct net_device_ops edma_axi_netdev_ops = { ++ .ndo_open = edma_open, ++ .ndo_stop = edma_close, ++ .ndo_start_xmit = edma_xmit, ++ .ndo_set_mac_address = edma_set_mac_addr, ++#ifdef CONFIG_RFS_ACCEL ++ .ndo_rx_flow_steer = edma_rx_flow_steer, ++ .ndo_register_rfs_filter = edma_register_rfs_filter, ++ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag, ++#endif ++ .ndo_get_stats = edma_get_stats, ++ .ndo_change_mtu = edma_change_mtu, ++}; ++ ++/* edma_axi_probe() ++ * Initialise an adapter identified by a platform_device structure. ++ * ++ * The OS initialization, configuring of the adapter private structure, ++ * and a hardware reset occur in the probe. ++ */ ++static int edma_axi_probe(struct platform_device *pdev) ++{ ++ struct edma_common_info *edma_cinfo; ++ struct edma_hw *hw; ++ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED]; ++ struct resource *res; ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *pnp; ++ struct device_node *mdio_node = NULL; ++ struct platform_device *mdio_plat = NULL; ++ struct mii_bus *miibus = NULL; ++ struct edma_mdio_data *mdio_data = NULL; ++ int i, j, k, err = 0; ++ int portid_bmp; ++ int idx = 0, idx_mac = 0; ++ ++ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) { ++ dev_err(&pdev->dev, "Invalid CPU Cores\n"); ++ return -EINVAL; ++ } ++ ++ if ((num_rxq != 4) && (num_rxq != 8)) { ++ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n"); ++ return -EINVAL; ++ } ++ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL); ++ if (!edma_cinfo) { ++ err = -ENOMEM; ++ goto err_alloc; ++ } ++ ++ edma_cinfo->pdev = pdev; ++ ++ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac); ++ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) { ++ pr_err("Invalid DTSI Entry for qcom,num_gmac\n"); ++ err = -EINVAL; ++ goto err_cinfo; ++ } ++ ++ /* Initialize the netdev array before allocation ++ * to avoid double free ++ */ ++ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) ++ edma_netdev[i] = NULL; ++ ++ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) { ++ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter), ++ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE); ++ ++ if (!edma_netdev[i]) { ++ dev_err(&pdev->dev, ++ "net device alloc fails for index=%d\n", i); ++ err = -ENODEV; ++ goto err_ioremap; ++ } ++ ++ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev); ++ platform_set_drvdata(pdev, edma_netdev[i]); ++ edma_cinfo->netdev[i] = edma_netdev[i]; ++ } ++ ++ /* Fill ring details */ ++ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE; ++ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4); ++ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE; ++ ++ /* Update num rx queues based on module parameter */ ++ edma_cinfo->num_rx_queues = num_rxq; ++ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2); ++ ++ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE; ++ ++ hw = &edma_cinfo->hw; ++ ++ /* Fill HW defaults */ ++ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK; ++ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK; ++ ++ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode); ++ of_property_read_u32(np, "qcom,rx_head_buf_size", ++ &hw->rx_head_buff_size); ++ ++ if (overwrite_mode) { ++ dev_info(&pdev->dev, "page mode overwritten"); ++ edma_cinfo->page_mode = page_mode; ++ } ++ ++ if (jumbo_mru) ++ edma_cinfo->fraglist_mode = 1; ++ ++ if (edma_cinfo->page_mode) ++ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO; ++ else if (edma_cinfo->fraglist_mode) ++ hw->rx_head_buff_size = jumbo_mru; ++ else if (!hw->rx_head_buff_size) ++ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE; ++ ++ hw->misc_intr_mask = 0; ++ hw->wol_intr_mask = 0; ++ ++ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE; ++ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE; ++ ++ /* configure RSS type to the different protocol that can be ++ * supported ++ */ ++ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP | ++ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP | ++ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(edma_cinfo->hw.hw_addr)) { ++ err = PTR_ERR(edma_cinfo->hw.hw_addr); ++ goto err_ioremap; ++ } ++ ++ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr; ++ ++ /* Parse tx queue interrupt number from device tree */ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) ++ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i); ++ ++ /* Parse rx queue interrupt number from device tree ++ * Here we are setting j to point to the point where we ++ * left tx interrupt parsing(i.e 16) and run run the loop ++ * from 0 to 7 to parse rx interrupt number. ++ */ ++ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0; ++ i < edma_cinfo->num_rx_queues; i++) { ++ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j); ++ k += ((num_rxq == 4) ? 2 : 1); ++ j += ((num_rxq == 4) ? 2 : 1); ++ } ++ ++ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size; ++ edma_cinfo->rx_page_buffer_len = PAGE_SIZE; ++ ++ err = edma_alloc_queues_tx(edma_cinfo); ++ if (err) { ++ dev_err(&pdev->dev, "Allocation of TX queue failed\n"); ++ goto err_tx_qinit; ++ } ++ ++ err = edma_alloc_queues_rx(edma_cinfo); ++ if (err) { ++ dev_err(&pdev->dev, "Allocation of RX queue failed\n"); ++ goto err_rx_qinit; ++ } ++ ++ err = edma_alloc_tx_rings(edma_cinfo); ++ if (err) { ++ dev_err(&pdev->dev, "Allocation of TX resources failed\n"); ++ goto err_tx_rinit; ++ } ++ ++ err = edma_alloc_rx_rings(edma_cinfo); ++ if (err) { ++ dev_err(&pdev->dev, "Allocation of RX resources failed\n"); ++ goto err_rx_rinit; ++ } ++ ++ /* Initialize netdev and netdev bitmap for transmit descriptor rings */ ++ for (i = 0; i < edma_cinfo->num_tx_queues; i++) { ++ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i]; ++ int j; ++ ++ etdr->netdev_bmp = 0; ++ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) { ++ etdr->netdev[j] = NULL; ++ etdr->nq[j] = NULL; ++ } ++ } ++ ++ if (of_property_read_bool(np, "qcom,mdio_supported")) { ++ mdio_node = of_find_compatible_node(NULL, NULL, ++ "qcom,ipq4019-mdio"); ++ if (!mdio_node) { ++ dev_err(&pdev->dev, "cannot find mdio node by phandle"); ++ err = -EIO; ++ goto err_mdiobus_init_fail; ++ } ++ ++ mdio_plat = of_find_device_by_node(mdio_node); ++ if (!mdio_plat) { ++ dev_err(&pdev->dev, ++ "cannot find platform device from mdio node"); ++ of_node_put(mdio_node); ++ err = -EIO; ++ goto err_mdiobus_init_fail; ++ } ++ ++ mdio_data = dev_get_drvdata(&mdio_plat->dev); ++ if (!mdio_data) { ++ dev_err(&pdev->dev, ++ "cannot get mii bus reference from device data"); ++ of_node_put(mdio_node); ++ err = -EIO; ++ goto err_mdiobus_init_fail; ++ } ++ ++ miibus = mdio_data->mii_bus; ++ } ++ ++ for_each_available_child_of_node(np, pnp) { ++ const char *mac_addr; ++ ++ /* this check is needed if parent and daughter dts have ++ * different number of gmac nodes ++ */ ++ if (idx_mac == edma_cinfo->num_gmac) { ++ of_node_put(np); ++ break; ++ } ++ ++ mac_addr = of_get_mac_address(pnp); ++ if (mac_addr) ++ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN); ++ ++ idx_mac++; ++ } ++ ++ /* Populate the adapter structure register the netdevice */ ++ for (i = 0; i < edma_cinfo->num_gmac; i++) { ++ int k, m; ++ ++ adapter[i] = netdev_priv(edma_netdev[i]); ++ adapter[i]->netdev = edma_netdev[i]; ++ adapter[i]->pdev = pdev; ++ for (j = 0; j < CONFIG_NR_CPUS; j++) { ++ m = i % 2; ++ adapter[i]->tx_start_offset[j] = ++ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1)); ++ /* Share the queues with available net-devices. ++ * For instance , with 5 net-devices ++ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13 ++ * and eth1/eth3 will get the remaining. ++ */ ++ for (k = adapter[i]->tx_start_offset[j]; k < ++ (adapter[i]->tx_start_offset[j] + 2); k++) { ++ if (edma_fill_netdev(edma_cinfo, k, i, j)) { ++ pr_err("Netdev overflow Error\n"); ++ goto err_register; ++ } ++ } ++ } ++ ++ adapter[i]->edma_cinfo = edma_cinfo; ++ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops; ++ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM ++ | NETIF_F_HW_VLAN_CTAG_TX ++ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG | ++ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO; ++ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | ++ NETIF_F_HW_VLAN_CTAG_RX ++ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | ++ NETIF_F_GRO; ++ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | ++ NETIF_F_TSO | NETIF_F_TSO6 | ++ NETIF_F_GRO; ++ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG | ++ NETIF_F_TSO | NETIF_F_TSO6 | ++ NETIF_F_GRO; ++ ++#ifdef CONFIG_RFS_ACCEL ++ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; ++ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; ++ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; ++ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE; ++#endif ++ edma_set_ethtool_ops(edma_netdev[i]); ++ ++ /* This just fill in some default MAC address ++ */ ++ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) { ++ random_ether_addr(edma_netdev[i]->dev_addr); ++ pr_info("EDMA using MAC@ - using"); ++ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n", ++ *(edma_netdev[i]->dev_addr), ++ *(edma_netdev[i]->dev_addr + 1), ++ *(edma_netdev[i]->dev_addr + 2), ++ *(edma_netdev[i]->dev_addr + 3), ++ *(edma_netdev[i]->dev_addr + 4), ++ *(edma_netdev[i]->dev_addr + 5)); ++ } ++ ++ err = register_netdev(edma_netdev[i]); ++ if (err) ++ goto err_register; ++ ++ /* carrier off reporting is important to ++ * ethtool even BEFORE open ++ */ ++ netif_carrier_off(edma_netdev[i]); ++ ++ /* Allocate reverse irq cpu mapping structure for ++ * receive queues ++ */ ++#ifdef CONFIG_RFS_ACCEL ++ edma_netdev[i]->rx_cpu_rmap = ++ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE); ++ if (!edma_netdev[i]->rx_cpu_rmap) { ++ err = -ENOMEM; ++ goto err_rmap_alloc_fail; ++ } ++#endif ++ } ++ ++ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++) ++ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL; ++ ++ for_each_available_child_of_node(np, pnp) { ++ const uint32_t *vlan_tag = NULL; ++ int len; ++ ++ /* this check is needed if parent and daughter dts have ++ * different number of gmac nodes ++ */ ++ if (idx == edma_cinfo->num_gmac) ++ break; ++ ++ /* Populate port-id to netdev lookup table */ ++ vlan_tag = of_get_property(pnp, "vlan_tag", &len); ++ if (!vlan_tag) { ++ pr_err("Vlan tag parsing Failed.\n"); ++ goto err_rmap_alloc_fail; ++ } ++ ++ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1); ++ vlan_tag++; ++ portid_bmp = of_read_number(vlan_tag, 1); ++ adapter[idx]->dp_bitmap = portid_bmp; ++ ++ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */ ++ while (portid_bmp) { ++ int port_bit = ffs(portid_bmp); ++ ++ if (port_bit > EDMA_MAX_PORTID_SUPPORTED) ++ goto err_rmap_alloc_fail; ++ edma_cinfo->portid_netdev_lookup_tbl[port_bit] = ++ edma_netdev[idx]; ++ portid_bmp &= ~(1 << (port_bit - 1)); ++ } ++ ++ if (!of_property_read_u32(pnp, "qcom,poll_required", ++ &adapter[idx]->poll_required)) { ++ if (adapter[idx]->poll_required) { ++ of_property_read_u32(pnp, "qcom,phy_mdio_addr", ++ &adapter[idx]->phy_mdio_addr); ++ of_property_read_u32(pnp, "qcom,forced_speed", ++ &adapter[idx]->forced_speed); ++ of_property_read_u32(pnp, "qcom,forced_duplex", ++ &adapter[idx]->forced_duplex); ++ ++ /* create a phyid using MDIO bus id ++ * and MDIO bus address ++ */ ++ snprintf(adapter[idx]->phy_id, ++ MII_BUS_ID_SIZE + 3, PHY_ID_FMT, ++ miibus->id, ++ adapter[idx]->phy_mdio_addr); ++ } ++ } else { ++ adapter[idx]->poll_required = 0; ++ adapter[idx]->forced_speed = SPEED_1000; ++ adapter[idx]->forced_duplex = DUPLEX_FULL; ++ } ++ ++ idx++; ++ } ++ ++ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net, ++ "net/edma", ++ edma_table); ++ if (!edma_cinfo->edma_ctl_table_hdr) { ++ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n"); ++ goto err_unregister_sysctl_tbl; ++ } ++ ++ /* Disable all 16 Tx and 8 rx irqs */ ++ edma_irq_disable(edma_cinfo); ++ ++ err = edma_reset(edma_cinfo); ++ if (err) { ++ err = -EIO; ++ goto err_reset; ++ } ++ ++ /* populate per_core_info, do a napi_Add, request 16 TX irqs, ++ * 8 RX irqs, do a napi enable ++ */ ++ for (i = 0; i < CONFIG_NR_CPUS; i++) { ++ u8 rx_start; ++ ++ edma_cinfo->edma_percpu_info[i].napi.state = 0; ++ ++ netif_napi_add(edma_netdev[0], ++ &edma_cinfo->edma_percpu_info[i].napi, ++ edma_poll, 64); ++ napi_enable(&edma_cinfo->edma_percpu_info[i].napi); ++ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i]; ++ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK ++ << (i << EDMA_RX_PER_CPU_MASK_SHIFT); ++ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i]; ++ edma_cinfo->edma_percpu_info[i].rx_start = ++ i << EDMA_RX_CPU_START_SHIFT; ++ rx_start = i << EDMA_RX_CPU_START_SHIFT; ++ edma_cinfo->edma_percpu_info[i].tx_status = 0; ++ edma_cinfo->edma_percpu_info[i].rx_status = 0; ++ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo; ++ ++ /* Request irq per core */ ++ for (j = edma_cinfo->edma_percpu_info[i].tx_start; ++ j < tx_start[i] + 4; j++) { ++ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j); ++ err = request_irq(edma_cinfo->tx_irq[j], ++ edma_interrupt, ++ 0, ++ &edma_tx_irq[j][0], ++ &edma_cinfo->edma_percpu_info[i]); ++ if (err) ++ goto err_reset; ++ } ++ ++ for (j = edma_cinfo->edma_percpu_info[i].rx_start; ++ j < (rx_start + ++ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2)); ++ j++) { ++ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j); ++ err = request_irq(edma_cinfo->rx_irq[j], ++ edma_interrupt, ++ 0, ++ &edma_rx_irq[j][0], ++ &edma_cinfo->edma_percpu_info[i]); ++ if (err) ++ goto err_reset; ++ } ++ ++#ifdef CONFIG_RFS_ACCEL ++ for (j = edma_cinfo->edma_percpu_info[i].rx_start; ++ j < rx_start + 2; j += 2) { ++ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap, ++ edma_cinfo->rx_irq[j]); ++ if (err) ++ goto err_rmap_add_fail; ++ } ++#endif ++ } ++ ++ /* Used to clear interrupt status, allocate rx buffer, ++ * configure edma descriptors registers ++ */ ++ err = edma_configure(edma_cinfo); ++ if (err) { ++ err = -EIO; ++ goto err_configure; ++ } ++ ++ /* Configure RSS indirection table. ++ * 128 hash will be configured in the following ++ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively ++ * and so on ++ */ ++ for (i = 0; i < EDMA_NUM_IDT; i++) ++ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE); ++ ++ /* Configure load balance mapping table. ++ * 4 table entry will be configured according to the ++ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4} ++ * respectively. ++ */ ++ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE); ++ ++ /* Configure Virtual queue for Tx rings ++ * User can also change this value runtime through ++ * a sysctl ++ */ ++ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE); ++ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE); ++ ++ /* Configure Max AXI Burst write size to 128 bytes*/ ++ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE, ++ EDMA_AXIW_MAXWRSIZE_VALUE); ++ ++ /* Enable All 16 tx and 8 rx irq mask */ ++ edma_irq_enable(edma_cinfo); ++ edma_enable_tx_ctrl(&edma_cinfo->hw); ++ edma_enable_rx_ctrl(&edma_cinfo->hw); ++ ++ for (i = 0; i < edma_cinfo->num_gmac; i++) { ++ if (adapter[i]->poll_required) { ++ adapter[i]->phydev = ++ phy_connect(edma_netdev[i], ++ (const char *)adapter[i]->phy_id, ++ &edma_adjust_link, ++ PHY_INTERFACE_MODE_SGMII); ++ if (IS_ERR(adapter[i]->phydev)) { ++ dev_dbg(&pdev->dev, "PHY attach FAIL"); ++ err = -EIO; ++ goto edma_phy_attach_fail; ++ } else { ++ adapter[i]->phydev->advertising |= ++ ADVERTISED_Pause | ++ ADVERTISED_Asym_Pause; ++ adapter[i]->phydev->supported |= ++ SUPPORTED_Pause | ++ SUPPORTED_Asym_Pause; ++ } ++ } else { ++ adapter[i]->phydev = NULL; ++ } ++ } ++ ++ spin_lock_init(&edma_cinfo->stats_lock); ++ ++ init_timer(&edma_stats_timer); ++ edma_stats_timer.expires = jiffies + 1*HZ; ++ edma_stats_timer.data = (unsigned long)edma_cinfo; ++ edma_stats_timer.function = edma_statistics_timer; /* timer handler */ ++ add_timer(&edma_stats_timer); ++ ++ return 0; ++ ++edma_phy_attach_fail: ++ miibus = NULL; ++err_configure: ++#ifdef CONFIG_RFS_ACCEL ++ for (i = 0; i < edma_cinfo->num_gmac; i++) { ++ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap); ++ adapter[i]->netdev->rx_cpu_rmap = NULL; ++ } ++#endif ++err_rmap_add_fail: ++ edma_free_irqs(adapter[0]); ++ for (i = 0; i < CONFIG_NR_CPUS; i++) ++ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); ++err_reset: ++err_unregister_sysctl_tbl: ++err_rmap_alloc_fail: ++ for (i = 0; i < edma_cinfo->num_gmac; i++) ++ unregister_netdev(edma_netdev[i]); ++err_register: ++err_mdiobus_init_fail: ++ edma_free_rx_rings(edma_cinfo); ++err_rx_rinit: ++ edma_free_tx_rings(edma_cinfo); ++err_tx_rinit: ++ edma_free_queues(edma_cinfo); ++err_rx_qinit: ++err_tx_qinit: ++ iounmap(edma_cinfo->hw.hw_addr); ++err_ioremap: ++ for (i = 0; i < edma_cinfo->num_gmac; i++) { ++ if (edma_netdev[i]) ++ free_netdev(edma_netdev[i]); ++ } ++err_cinfo: ++ kfree(edma_cinfo); ++err_alloc: ++ return err; ++} ++ ++/* edma_axi_remove() ++ * Device Removal Routine ++ * ++ * edma_axi_remove is called by the platform subsystem to alert the driver ++ * that it should release a platform device. ++ */ ++static int edma_axi_remove(struct platform_device *pdev) ++{ ++ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]); ++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; ++ struct edma_hw *hw = &edma_cinfo->hw; ++ int i; ++ ++ for (i = 0; i < edma_cinfo->num_gmac; i++) ++ unregister_netdev(edma_netdev[i]); ++ ++ edma_stop_rx_tx(hw); ++ for (i = 0; i < CONFIG_NR_CPUS; i++) ++ napi_disable(&edma_cinfo->edma_percpu_info[i].napi); ++ ++ edma_irq_disable(edma_cinfo); ++ edma_write_reg(EDMA_REG_RX_ISR, 0xff); ++ edma_write_reg(EDMA_REG_TX_ISR, 0xffff); ++#ifdef CONFIG_RFS_ACCEL ++ for (i = 0; i < edma_cinfo->num_gmac; i++) { ++ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap); ++ edma_netdev[i]->rx_cpu_rmap = NULL; ++ } ++#endif ++ ++ for (i = 0; i < edma_cinfo->num_gmac; i++) { ++ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]); ++ ++ if (adapter->phydev) ++ phy_disconnect(adapter->phydev); ++ } ++ ++ del_timer_sync(&edma_stats_timer); ++ edma_free_irqs(adapter); ++ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr); ++ edma_free_tx_resources(edma_cinfo); ++ edma_free_rx_resources(edma_cinfo); ++ edma_free_tx_rings(edma_cinfo); ++ edma_free_rx_rings(edma_cinfo); ++ edma_free_queues(edma_cinfo); ++ for (i = 0; i < edma_cinfo->num_gmac; i++) ++ free_netdev(edma_netdev[i]); ++ ++ kfree(edma_cinfo); ++ ++ return 0; ++} ++ ++static const struct of_device_id edma_of_mtable[] = { ++ {.compatible = "qcom,ess-edma" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, edma_of_mtable); ++ ++static struct platform_driver edma_axi_driver = { ++ .driver = { ++ .name = edma_axi_driver_name, ++ .of_match_table = edma_of_mtable, ++ }, ++ .probe = edma_axi_probe, ++ .remove = edma_axi_remove, ++}; ++ ++module_platform_driver(edma_axi_driver); ++ ++MODULE_AUTHOR("Qualcomm Atheros Inc"); ++MODULE_DESCRIPTION("QCA ESS EDMA driver"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c +@@ -0,0 +1,374 @@ ++/* ++ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for ++ * any purpose with or without fee is hereby granted, provided that the ++ * above copyright notice and this permission notice appear in all copies. ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT ++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#include <linux/ethtool.h> ++#include <linux/netdevice.h> ++#include <linux/string.h> ++#include "edma.h" ++ ++struct edma_ethtool_stats { ++ uint8_t stat_string[ETH_GSTRING_LEN]; ++ uint32_t stat_offset; ++}; ++ ++#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m) ++#define DRVINFO_LEN 32 ++ ++/* Array of strings describing statistics ++ */ ++static const struct edma_ethtool_stats edma_gstrings_stats[] = { ++ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)}, ++ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)}, ++ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)}, ++ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)}, ++ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)}, ++ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)}, ++ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)}, ++ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)}, ++ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)}, ++ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)}, ++ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)}, ++ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)}, ++ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)}, ++ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)}, ++ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)}, ++ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)}, ++ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)}, ++ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)}, ++ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)}, ++ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)}, ++ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)}, ++ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)}, ++ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)}, ++ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)}, ++ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)}, ++ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)}, ++ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)}, ++ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)}, ++ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)}, ++ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)}, ++ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)}, ++ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)}, ++ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)}, ++ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)}, ++ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)}, ++ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)}, ++ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)}, ++ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)}, ++ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)}, ++ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)}, ++ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)}, ++ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)}, ++ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)}, ++ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)}, ++ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)}, ++ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)}, ++ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)}, ++ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)}, ++ {"tx_desc_error", EDMA_STAT(tx_desc_error)}, ++}; ++ ++#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats) ++ ++/* edma_get_strset_count() ++ * Get strset count ++ */ ++static int edma_get_strset_count(struct net_device *netdev, ++ int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: ++ return EDMA_STATS_LEN; ++ default: ++ netdev_dbg(netdev, "%s: Invalid string set", __func__); ++ return -EOPNOTSUPP; ++ } ++} ++ ++ ++/* edma_get_strings() ++ * get stats string ++ */ ++static void edma_get_strings(struct net_device *netdev, uint32_t stringset, ++ uint8_t *data) ++{ ++ uint8_t *p = data; ++ uint32_t i; ++ ++ switch (stringset) { ++ case ETH_SS_STATS: ++ for (i = 0; i < EDMA_STATS_LEN; i++) { ++ memcpy(p, edma_gstrings_stats[i].stat_string, ++ min((size_t)ETH_GSTRING_LEN, ++ strlen(edma_gstrings_stats[i].stat_string) ++ + 1)); ++ p += ETH_GSTRING_LEN; ++ } ++ break; ++ } ++} ++ ++/* edma_get_ethtool_stats() ++ * Get ethtool statistics ++ */ ++static void edma_get_ethtool_stats(struct net_device *netdev, ++ struct ethtool_stats *stats, uint64_t *data) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; ++ int i; ++ uint8_t *p = NULL; ++ ++ edma_read_append_stats(edma_cinfo); ++ ++ for(i = 0; i < EDMA_STATS_LEN; i++) { ++ p = (uint8_t *)&(edma_cinfo->edma_ethstats) + ++ edma_gstrings_stats[i].stat_offset; ++ data[i] = *(uint32_t *)p; ++ } ++} ++ ++/* edma_get_drvinfo() ++ * get edma driver info ++ */ ++static void edma_get_drvinfo(struct net_device *dev, ++ struct ethtool_drvinfo *info) ++{ ++ strlcpy(info->driver, "ess_edma", DRVINFO_LEN); ++ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN); ++} ++ ++/* edma_nway_reset() ++ * Reset the phy, if available. ++ */ ++static int edma_nway_reset(struct net_device *netdev) ++{ ++ return -EINVAL; ++} ++ ++/* edma_get_wol() ++ * get wake on lan info ++ */ ++static void edma_get_wol(struct net_device *netdev, ++ struct ethtool_wolinfo *wol) ++{ ++ wol->supported = 0; ++ wol->wolopts = 0; ++} ++ ++/* edma_get_msglevel() ++ * get message level. ++ */ ++static uint32_t edma_get_msglevel(struct net_device *netdev) ++{ ++ return 0; ++} ++ ++/* edma_get_settings() ++ * Get edma settings ++ */ ++static int edma_get_settings(struct net_device *netdev, ++ struct ethtool_cmd *ecmd) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ ++ if (adapter->poll_required) { ++ struct phy_device *phydev = NULL; ++ uint16_t phyreg; ++ ++ if ((adapter->forced_speed != SPEED_UNKNOWN) ++ && !(adapter->poll_required)) ++ return -EPERM; ++ ++ phydev = adapter->phydev; ++ ++ ecmd->advertising = phydev->advertising; ++ ecmd->autoneg = phydev->autoneg; ++ ++ if (adapter->link_state == __EDMA_LINKDOWN) { ++ ecmd->speed = SPEED_UNKNOWN; ++ ecmd->duplex = DUPLEX_UNKNOWN; ++ } else { ++ ecmd->speed = phydev->speed; ++ ecmd->duplex = phydev->duplex; ++ } ++ ++ ecmd->phy_address = adapter->phy_mdio_addr; ++ ++ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA); ++ if (phyreg & LPA_10HALF) ++ ecmd->lp_advertising |= ADVERTISED_10baseT_Half; ++ ++ if (phyreg & LPA_10FULL) ++ ecmd->lp_advertising |= ADVERTISED_10baseT_Full; ++ ++ if (phyreg & LPA_100HALF) ++ ecmd->lp_advertising |= ADVERTISED_100baseT_Half; ++ ++ if (phyreg & LPA_100FULL) ++ ecmd->lp_advertising |= ADVERTISED_100baseT_Full; ++ ++ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000); ++ if (phyreg & LPA_1000HALF) ++ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half; ++ ++ if (phyreg & LPA_1000FULL) ++ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full; ++ } else { ++ /* If the speed/duplex for this GMAC is forced and we ++ * are not polling for link state changes, return the ++ * values as specified by platform. This will be true ++ * for GMACs connected to switch, and interfaces that ++ * do not use a PHY. ++ */ ++ if (!(adapter->poll_required)) { ++ if (adapter->forced_speed != SPEED_UNKNOWN) { ++ /* set speed and duplex */ ++ ethtool_cmd_speed_set(ecmd, SPEED_1000); ++ ecmd->duplex = DUPLEX_FULL; ++ ++ /* Populate capabilities advertised by self */ ++ ecmd->advertising = 0; ++ ecmd->autoneg = 0; ++ ecmd->port = PORT_TP; ++ ecmd->transceiver = XCVR_EXTERNAL; ++ } else { ++ /* non link polled and non ++ * forced speed/duplex interface ++ */ ++ return -EIO; ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++/* edma_set_settings() ++ * Set EDMA settings ++ */ ++static int edma_set_settings(struct net_device *netdev, ++ struct ethtool_cmd *ecmd) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ struct phy_device *phydev = NULL; ++ ++ if ((adapter->forced_speed != SPEED_UNKNOWN) && ++ !adapter->poll_required) ++ return -EPERM; ++ ++ phydev = adapter->phydev; ++ phydev->advertising = ecmd->advertising; ++ phydev->autoneg = ecmd->autoneg; ++ phydev->speed = ethtool_cmd_speed(ecmd); ++ phydev->duplex = ecmd->duplex; ++ ++ genphy_config_aneg(phydev); ++ ++ return 0; ++} ++ ++/* edma_get_coalesce ++ * get interrupt mitigation ++ */ ++static int edma_get_coalesce(struct net_device *netdev, ++ struct ethtool_coalesce *ec) ++{ ++ u32 reg_val; ++ ++ edma_get_tx_rx_coalesce(®_val); ++ ++ /* We read the Interrupt Moderation Timer(IMT) register value, ++ * use lower 16 bit for rx and higher 16 bit for Tx. We do a ++ * left shift by 1, because IMT resolution timer is 2usecs. ++ * Hence the value given by the register is multiplied by 2 to ++ * get the actual time in usecs. ++ */ ++ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1); ++ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1); ++ ++ return 0; ++} ++ ++/* edma_set_coalesce ++ * set interrupt mitigation ++ */ ++static int edma_set_coalesce(struct net_device *netdev, ++ struct ethtool_coalesce *ec) ++{ ++ if (ec->tx_coalesce_usecs) ++ edma_change_tx_coalesce(ec->tx_coalesce_usecs); ++ if (ec->rx_coalesce_usecs) ++ edma_change_rx_coalesce(ec->rx_coalesce_usecs); ++ ++ return 0; ++} ++ ++/* edma_set_priv_flags() ++ * Set EDMA private flags ++ */ ++static int edma_set_priv_flags(struct net_device *netdev, u32 flags) ++{ ++ return 0; ++} ++ ++/* edma_get_priv_flags() ++ * get edma driver flags ++ */ ++static u32 edma_get_priv_flags(struct net_device *netdev) ++{ ++ return 0; ++} ++ ++/* edma_get_ringparam() ++ * get ring size ++ */ ++static void edma_get_ringparam(struct net_device *netdev, ++ struct ethtool_ringparam *ring) ++{ ++ struct edma_adapter *adapter = netdev_priv(netdev); ++ struct edma_common_info *edma_cinfo = adapter->edma_cinfo; ++ ++ ring->tx_max_pending = edma_cinfo->tx_ring_count; ++ ring->rx_max_pending = edma_cinfo->rx_ring_count; ++} ++ ++/* Ethtool operations ++ */ ++static const struct ethtool_ops edma_ethtool_ops = { ++ .get_drvinfo = &edma_get_drvinfo, ++ .get_link = ðtool_op_get_link, ++ .get_msglevel = &edma_get_msglevel, ++ .nway_reset = &edma_nway_reset, ++ .get_wol = &edma_get_wol, ++ .get_settings = &edma_get_settings, ++ .set_settings = &edma_set_settings, ++ .get_strings = &edma_get_strings, ++ .get_sset_count = &edma_get_strset_count, ++ .get_ethtool_stats = &edma_get_ethtool_stats, ++ .get_coalesce = &edma_get_coalesce, ++ .set_coalesce = &edma_set_coalesce, ++ .get_priv_flags = edma_get_priv_flags, ++ .set_priv_flags = edma_set_priv_flags, ++ .get_ringparam = edma_get_ringparam, ++}; ++ ++/* edma_set_ethtool_ops ++ * Set ethtool operations ++ */ ++void edma_set_ethtool_ops(struct net_device *netdev) ++{ ++ netdev->ethtool_ops = &edma_ethtool_ops; ++} +--- /dev/null ++++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h +@@ -0,0 +1,332 @@ ++/* ++ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. ++ * ++ * Permission to use, copy, modify, and/or distribute this software for ++ * any purpose with or without fee is hereby granted, provided that the ++ * above copyright notice and this permission notice appear in all copies. ++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES ++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES ++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT ++ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ++ */ ++ ++#ifndef _ESS_EDMA_H_ ++#define _ESS_EDMA_H_ ++ ++#include <linux/types.h> ++ ++struct edma_adapter; ++struct edma_hw; ++ ++/* register definition */ ++#define EDMA_REG_MAS_CTRL 0x0 ++#define EDMA_REG_TIMEOUT_CTRL 0x004 ++#define EDMA_REG_DBG0 0x008 ++#define EDMA_REG_DBG1 0x00C ++#define EDMA_REG_SW_CTRL0 0x100 ++#define EDMA_REG_SW_CTRL1 0x104 ++ ++/* Interrupt Status Register */ ++#define EDMA_REG_RX_ISR 0x200 ++#define EDMA_REG_TX_ISR 0x208 ++#define EDMA_REG_MISC_ISR 0x210 ++#define EDMA_REG_WOL_ISR 0x218 ++ ++#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x) ++ ++#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100 ++#define EDMA_MISC_ISR_AXIR_ERR 0x00000200 ++#define EDMA_MISC_ISR_TXF_DEAD 0x00000400 ++#define EDMA_MISC_ISR_AXIW_ERR 0x00000800 ++#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000 ++ ++#define EDMA_WOL_ISR 0x00000001 ++ ++/* Interrupt Mask Register */ ++#define EDMA_REG_MISC_IMR 0x214 ++#define EDMA_REG_WOL_IMR 0x218 ++ ++#define EDMA_RX_IMR_NORMAL_MASK 0x1 ++#define EDMA_TX_IMR_NORMAL_MASK 0x1 ++#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF ++#define EDMA_WOL_IMR_NORMAL_MASK 0x1 ++ ++/* Edma receive consumer index */ ++#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */ ++/* Edma transmit consumer index */ ++#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */ ++ ++/* IRQ Moderator Initial Timer Register */ ++#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280 ++#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF ++#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0 ++#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16 ++ ++/* Interrupt Control Register */ ++#define EDMA_REG_INTR_CTRL 0x284 ++#define EDMA_INTR_CLR_TYP_SHIFT 0 ++#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1 ++#define EDMA_INTR_CLEAR_TYPE_W1 0 ++#define EDMA_INTR_CLEAR_TYPE_R 1 ++ ++/* RX Interrupt Mask Register */ ++#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */ ++ ++/* TX Interrupt mask register */ ++#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */ ++ ++/* Load Ptr Register ++ * Software sets this bit after the initialization of the head and tail ++ */ ++#define EDMA_REG_TX_SRAM_PART 0x400 ++#define EDMA_LOAD_PTR_SHIFT 16 ++ ++/* TXQ Control Register */ ++#define EDMA_REG_TXQ_CTRL 0x404 ++#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10 ++#define EDMA_TXQ_CTRL_TXQ_EN 0x20 ++#define EDMA_TXQ_CTRL_ENH_MODE 0x40 ++#define EDMA_TXQ_CTRL_LS_8023_EN 0x80 ++#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100 ++#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200 ++#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF ++#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF ++#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0 ++#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16 ++ ++#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */ ++#define EDMA_TXF_WATER_MARK_MASK 0x0FFF ++#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0 ++#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16 ++#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000 ++ ++/* WRR Control Register */ ++#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c ++#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410 ++#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414 ++#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418 ++ ++/* Weight round robin(WRR), it takes queue as input, and computes ++ * starting bits where we need to write the weight for a particular ++ * queue ++ */ ++#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20) ++ ++/* Tx Descriptor Control Register */ ++#define EDMA_REG_TPD_RING_SIZE 0x41C ++#define EDMA_TPD_RING_SIZE_SHIFT 0 ++#define EDMA_TPD_RING_SIZE_MASK 0xFFFF ++ ++/* Transmit descriptor base address */ ++#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */ ++ ++/* TPD Index Register */ ++#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */ ++ ++#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF ++#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000 ++#define EDMA_TPD_PROD_IDX_MASK 0xFFFF ++#define EDMA_TPD_CONS_IDX_MASK 0xFFFF ++#define EDMA_TPD_PROD_IDX_SHIFT 0 ++#define EDMA_TPD_CONS_IDX_SHIFT 16 ++ ++/* TX Virtual Queue Mapping Control Register */ ++#define EDMA_REG_VQ_CTRL0 0x4A0 ++#define EDMA_REG_VQ_CTRL1 0x4A4 ++ ++/* Virtual QID shift, it takes queue as input, and computes ++ * Virtual QID position in virtual qid control register ++ */ ++#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24) ++ ++/* Virtual Queue Default Value */ ++#define EDMA_VQ_REG_VALUE 0x240240 ++ ++/* Tx side Port Interface Control Register */ ++#define EDMA_REG_PORT_CTRL 0x4A8 ++#define EDMA_PAD_EN_SHIFT 15 ++ ++/* Tx side VLAN Configuration Register */ ++#define EDMA_REG_VLAN_CFG 0x4AC ++ ++#define EDMA_TX_CVLAN 16 ++#define EDMA_TX_INS_CVLAN 17 ++#define EDMA_TX_CVLAN_TAG_SHIFT 0 ++ ++#define EDMA_TX_SVLAN 14 ++#define EDMA_TX_INS_SVLAN 15 ++#define EDMA_TX_SVLAN_TAG_SHIFT 16 ++ ++/* Tx Queue Packet Statistic Register */ ++#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */ ++ ++#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF ++ ++/* Tx Queue Byte Statistic Register */ ++#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */ ++ ++/* Load Balance Based Ring Offset Register */ ++#define EDMA_REG_LB_RING 0x800 ++#define EDMA_LB_RING_ENTRY_MASK 0xff ++#define EDMA_LB_RING_ID_MASK 0x7 ++#define EDMA_LB_RING_PROFILE_ID_MASK 0x3 ++#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8 ++#define EDMA_LB_RING_ID_OFFSET 0 ++#define EDMA_LB_RING_PROFILE_ID_OFFSET 3 ++#define EDMA_LB_REG_VALUE 0x6040200 ++ ++/* Load Balance Priority Mapping Register */ ++#define EDMA_REG_LB_PRI_START 0x804 ++#define EDMA_REG_LB_PRI_END 0x810 ++#define EDMA_LB_PRI_REG_INC 4 ++#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4 ++#define EDMA_LB_PRI_ENTRY_MASK 0xf ++ ++/* RSS Priority Mapping Register */ ++#define EDMA_REG_RSS_PRI 0x820 ++#define EDMA_RSS_PRI_ENTRY_MASK 0xf ++#define EDMA_RSS_RING_ID_MASK 0x7 ++#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4 ++ ++/* RSS Indirection Register */ ++#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */ ++#define EDMA_NUM_IDT 16 ++#define EDMA_RSS_IDT_VALUE 0x64206420 ++ ++/* Default RSS Ring Register */ ++#define EDMA_REG_DEF_RSS 0x890 ++#define EDMA_DEF_RSS_MASK 0x7 ++ ++/* RSS Hash Function Type Register */ ++#define EDMA_REG_RSS_TYPE 0x894 ++#define EDMA_RSS_TYPE_NONE 0x01 ++#define EDMA_RSS_TYPE_IPV4TCP 0x02 ++#define EDMA_RSS_TYPE_IPV6_TCP 0x04 ++#define EDMA_RSS_TYPE_IPV4_UDP 0x08 ++#define EDMA_RSS_TYPE_IPV6UDP 0x10 ++#define EDMA_RSS_TYPE_IPV4 0x20 ++#define EDMA_RSS_TYPE_IPV6 0x40 ++#define EDMA_RSS_HASH_MODE_MASK 0x7f ++ ++#define EDMA_REG_RSS_HASH_VALUE 0x8C0 ++ ++#define EDMA_REG_RSS_TYPE_RESULT 0x8C4 ++ ++#define EDMA_HASH_TYPE_START 0 ++#define EDMA_HASH_TYPE_END 5 ++#define EDMA_HASH_TYPE_SHIFT 12 ++ ++#define EDMA_RFS_FLOW_ENTRIES 1024 ++#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1) ++#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128 ++ ++/* RFD Base Address Register */ ++#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */ ++ ++/* RFD Index Register */ ++#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) ++ ++#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF ++#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000 ++#define EDMA_RFD_PROD_IDX_MASK 0xFFF ++#define EDMA_RFD_CONS_IDX_MASK 0xFFF ++#define EDMA_RFD_PROD_IDX_SHIFT 0 ++#define EDMA_RFD_CONS_IDX_SHIFT 16 ++ ++/* Rx Descriptor Control Register */ ++#define EDMA_REG_RX_DESC0 0xA10 ++#define EDMA_RFD_RING_SIZE_MASK 0xFFF ++#define EDMA_RX_BUF_SIZE_MASK 0xFFFF ++#define EDMA_RFD_RING_SIZE_SHIFT 0 ++#define EDMA_RX_BUF_SIZE_SHIFT 16 ++ ++#define EDMA_REG_RX_DESC1 0xA14 ++#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F ++#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F ++#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF ++#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0 ++#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8 ++#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16 ++ ++/* RXQ Control Register */ ++#define EDMA_REG_RXQ_CTRL 0xA18 ++#define EDMA_FIFO_THRESH_TYPE_SHIF 0 ++#define EDMA_FIFO_THRESH_128_BYTE 0x0 ++#define EDMA_FIFO_THRESH_64_BYTE 0x1 ++#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002 ++#define EDMA_RXQ_CTRL_EN 0x0000FF00 ++ ++/* AXI Burst Size Config */ ++#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C ++#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0 ++ ++/* Rx Statistics Register */ ++#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */ ++#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */ ++ ++/* WoL Pattern Length Register */ ++#define EDMA_REG_WOL_PATTERN_LEN0 0xC00 ++#define EDMA_WOL_PT_LEN_MASK 0xFF ++#define EDMA_WOL_PT0_LEN_SHIFT 0 ++#define EDMA_WOL_PT1_LEN_SHIFT 8 ++#define EDMA_WOL_PT2_LEN_SHIFT 16 ++#define EDMA_WOL_PT3_LEN_SHIFT 24 ++ ++#define EDMA_REG_WOL_PATTERN_LEN1 0xC04 ++#define EDMA_WOL_PT4_LEN_SHIFT 0 ++#define EDMA_WOL_PT5_LEN_SHIFT 8 ++#define EDMA_WOL_PT6_LEN_SHIFT 16 ++ ++/* WoL Control Register */ ++#define EDMA_REG_WOL_CTRL 0xC08 ++#define EDMA_WOL_WK_EN 0x00000001 ++#define EDMA_WOL_MG_EN 0x00000002 ++#define EDMA_WOL_PT0_EN 0x00000004 ++#define EDMA_WOL_PT1_EN 0x00000008 ++#define EDMA_WOL_PT2_EN 0x00000010 ++#define EDMA_WOL_PT3_EN 0x00000020 ++#define EDMA_WOL_PT4_EN 0x00000040 ++#define EDMA_WOL_PT5_EN 0x00000080 ++#define EDMA_WOL_PT6_EN 0x00000100 ++ ++/* MAC Control Register */ ++#define EDMA_REG_MAC_CTRL0 0xC20 ++#define EDMA_REG_MAC_CTRL1 0xC24 ++ ++/* WoL Pattern Register */ ++#define EDMA_REG_WOL_PATTERN_START 0x5000 ++#define EDMA_PATTERN_PART_REG_OFFSET 0x40 ++ ++ ++/* TX descriptor fields */ ++#define EDMA_TPD_HDR_SHIFT 0 ++#define EDMA_TPD_PPPOE_EN 0x00000100 ++#define EDMA_TPD_IP_CSUM_EN 0x00000200 ++#define EDMA_TPD_TCP_CSUM_EN 0x0000400 ++#define EDMA_TPD_UDP_CSUM_EN 0x00000800 ++#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00 ++#define EDMA_TPD_LSO_EN 0x00001000 ++#define EDMA_TPD_LSO_V2_EN 0x00002000 ++#define EDMA_TPD_IPV4_EN 0x00010000 ++#define EDMA_TPD_MSS_MASK 0x1FFF ++#define EDMA_TPD_MSS_SHIFT 18 ++#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18 ++ ++/* RRD descriptor fields */ ++#define EDMA_RRD_NUM_RFD_MASK 0x000F ++#define EDMA_RRD_SVLAN 0x8000 ++#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF; ++ ++#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF ++#define EDMA_RRD_CSUM_FAIL_MASK 0xC000 ++#define EDMA_RRD_CVLAN 0x0001 ++#define EDMA_RRD_DESC_VALID 0x8000 ++ ++#define EDMA_RRD_PRIORITY_SHIFT 4 ++#define EDMA_RRD_PRIORITY_MASK 0x7 ++#define EDMA_RRD_PORT_TYPE_SHIFT 7 ++#define EDMA_RRD_PORT_TYPE_MASK 0x1F ++#endif /* _ESS_EDMA_H_ */ |