1 files changed, 488 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.9/0034-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch b/target/linux/ipq806x/patches-4.9/0034-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
new file mode 100644
index 0000000000..86a8a87a2a
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0034-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch
@@ -0,0 +1,488 @@
+From e8d6fd46f5f3c5860fa7fa98004de9bd97c0d869 Mon Sep 17 00:00:00 2001
+From: Senthilkumar N L <snlakshm@codeaurora.org>
+Date: Tue, 6 Jan 2015 12:52:23 +0530
+Subject: [PATCH 34/37] qcom: ipq4019: Add IPQ4019 USB HS/SS PHY drivers
+
+These drivers handles control and configuration of the HS
+and SS USB PHY transceivers.
+
+Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org>
+---
+ drivers/usb/phy/Kconfig          |   11 ++
+ drivers/usb/phy/Makefile         |    2 +
+ drivers/usb/phy/phy-qca-baldur.c |  262 ++++++++++++++++++++++++++++++++++++++
+ drivers/usb/phy/phy-qca-uniphy.c |  171 +++++++++++++++++++++++++
+ 4 files changed, 446 insertions(+)
+ create mode 100644 drivers/usb/phy/phy-qca-baldur.c
+ create mode 100644 drivers/usb/phy/phy-qca-uniphy.c
+
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -194,6 +194,17 @@ config USB_MXS_PHY
+ 
+ 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+ 
++config USB_IPQ4019_PHY
++	tristate "IPQ4019 PHY wrappers support"
++	depends on (USB || USB_GADGET) && ARCH_QCOM
++	select USB_PHY
++	help
++	  Enable this to support the USB PHY transceivers on QCA961x chips.
++	  It handles PHY initialization, clock management required after
++	  resetting the hardware and power management.
++	  This driver is required even for peripheral only or host only
++	  mode configurations.
++
+ config USB_ULPI
+ 	bool "Generic ULPI Transceiver Driver"
+ 	depends on ARM || ARM64
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -21,6 +21,8 @@ obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio
+ obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
+ obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
+ obj-$(CONFIG_USB_QCOM_8X16_PHY)	+= phy-qcom-8x16-usb.o
++obj-$(CONFIG_USB_IPQ4019_PHY)           += phy-qca-baldur.o
++obj-$(CONFIG_USB_IPQ4019_PHY)           += phy-qca-uniphy.o
+ obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
+ obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
+ obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
+--- /dev/null
++++ b/drivers/usb/phy/phy-qca-baldur.c
+@@ -0,0 +1,262 @@
++/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/regulator/consumer.h>
++#include <linux/usb/phy.h>
++#include <linux/reset.h>
++#include <linux/of_device.h>
++
++/**
++ *  USB Hardware registers
++ */
++#define PHY_CTRL0_ADDR	0x000
++#define PHY_CTRL1_ADDR	0x004
++#define PHY_CTRL2_ADDR	0x008
++#define PHY_CTRL3_ADDR	0x00C
++#define PHY_CTRL4_ADDR	0x010
++#define PHY_MISC_ADDR	0x024
++#define PHY_IPG_ADDR	0x030
++
++#define PHY_CTRL0_EMU_ADDR	0x180
++#define PHY_CTRL1_EMU_ADDR	0x184
++#define PHY_CTRL2_EMU_ADDR	0x188
++#define PHY_CTRL3_EMU_ADDR	0x18C
++#define PHY_CTRL4_EMU_ADDR	0x190
++#define PHY_MISC_EMU_ADDR	0x1A4
++#define PHY_IPG_EMU_ADDR	0x1B0
++
++#define PHY_CTRL0_VAL	0xA4600015
++#define PHY_CTRL1_VAL	0x09500000
++#define PHY_CTRL2_VAL	0x00058180
++#define PHY_CTRL3_VAL	0x6DB6DCD6
++#define PHY_CTRL4_VAL	0x836DB6DB
++#define PHY_MISC_VAL	0x3803FB0C
++#define PHY_IPG_VAL		0x47323232
++
++#define PHY_CTRL0_EMU_VAL	0xb4000015
++#define PHY_CTRL1_EMU_VAL	0x09500000
++#define PHY_CTRL2_EMU_VAL	0x00058180
++#define PHY_CTRL3_EMU_VAL	0x6DB6DCD6
++#define PHY_CTRL4_EMU_VAL	0x836DB6DB
++#define PHY_MISC_EMU_VAL	0x3803FB0C
++#define PHY_IPG_EMU_VAL		0x47323232
++
++#define USB30_HS_PHY_HOST_MODE	(0x01 << 21)
++#define USB20_HS_PHY_HOST_MODE	(0x01 << 5)
++
++/* used to differentiate between USB3 HS and USB2 HS PHY */
++struct qca_baldur_hs_data {
++	unsigned int usb3_hs_phy;
++	unsigned int phy_config_offset;
++};
++
++struct qca_baldur_hs_phy {
++	struct device *dev;
++	struct usb_phy phy;
++
++	void __iomem *base;
++	void __iomem *qscratch_base;
++
++	struct reset_control *por_rst;
++	struct reset_control *srif_rst;
++
++	unsigned int host;
++	unsigned int emulation;
++	const struct qca_baldur_hs_data *data;
++};
++
++#define	phy_to_dw_phy(x)	container_of((x), struct qca_baldur_hs_phy, phy)
++
++static int qca_baldur_phy_read(struct usb_phy *x, u32 reg)
++{
++	struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
++
++	return readl(phy->base + reg);
++}
++
++static int qca_baldur_phy_write(struct usb_phy *x, u32 val, u32 reg)
++{
++	struct qca_baldur_hs_phy *phy = phy_to_dw_phy(x);
++
++	writel(val, phy->base + reg);
++	return 0;
++}
++
++static int qca_baldur_hs_phy_init(struct usb_phy *x)
++{
++	struct qca_baldur_hs_phy	*phy = phy_to_dw_phy(x);
++
++	/* assert HS PHY POR reset */
++	reset_control_assert(phy->por_rst);
++	msleep(10);
++
++	/* assert HS PHY SRIF reset */
++	reset_control_assert(phy->srif_rst);
++	msleep(10);
++
++	/* deassert HS PHY SRIF reset and program HS PHY registers */
++	reset_control_deassert(phy->srif_rst);
++	msleep(10);
++
++	if (!phy->emulation) {
++		/* perform PHY register writes */
++		writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
++		writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
++		writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
++		writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
++		writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
++		writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
++		writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
++	} else {
++		/* perform PHY register writes */
++		writel(PHY_CTRL0_EMU_VAL, phy->base + PHY_CTRL0_EMU_ADDR);
++		writel(PHY_CTRL1_EMU_VAL, phy->base + PHY_CTRL1_EMU_ADDR);
++		writel(PHY_CTRL2_EMU_VAL, phy->base + PHY_CTRL2_EMU_ADDR);
++		writel(PHY_CTRL3_EMU_VAL, phy->base + PHY_CTRL3_EMU_ADDR);
++		writel(PHY_CTRL4_EMU_VAL, phy->base + PHY_CTRL4_EMU_ADDR);
++		writel(PHY_MISC_EMU_VAL, phy->base + PHY_MISC_EMU_ADDR);
++		writel(PHY_IPG_EMU_VAL, phy->base + PHY_IPG_EMU_ADDR);
++	}
++
++	msleep(10);
++
++	/* de-assert USB3 HS PHY POR reset */
++	reset_control_deassert(phy->por_rst);
++
++	return 0;
++}
++
++static int qca_baldur_hs_get_resources(struct qca_baldur_hs_phy *phy)
++{
++	struct platform_device *pdev = to_platform_device(phy->dev);
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	phy->base = devm_ioremap_resource(phy->dev, res);
++	if (IS_ERR(phy->base))
++		return PTR_ERR(phy->base);
++
++	phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
++	if (IS_ERR(phy->por_rst))
++		return PTR_ERR(phy->por_rst);
++
++	phy->srif_rst = devm_reset_control_get(phy->dev, "srif_rst");
++	if (IS_ERR(phy->srif_rst))
++		return PTR_ERR(phy->srif_rst);
++
++	return 0;
++}
++
++static void qca_baldur_hs_put_resources(struct qca_baldur_hs_phy *phy)
++{
++	reset_control_assert(phy->srif_rst);
++	reset_control_assert(phy->por_rst);
++}
++
++static int qca_baldur_hs_remove(struct platform_device *pdev)
++{
++	struct qca_baldur_hs_phy *phy = platform_get_drvdata(pdev);
++
++	usb_remove_phy(&phy->phy);
++	return 0;
++}
++
++static void qca_baldur_hs_phy_shutdown(struct usb_phy *x)
++{
++	struct qca_baldur_hs_phy   *phy = phy_to_dw_phy(x);
++
++	qca_baldur_hs_put_resources(phy);
++}
++
++static struct usb_phy_io_ops qca_baldur_io_ops = {
++	.read = qca_baldur_phy_read,
++	.write = qca_baldur_phy_write,
++};
++
++static const struct qca_baldur_hs_data usb3_hs_data = {
++	.usb3_hs_phy = 1,
++	.phy_config_offset = USB30_HS_PHY_HOST_MODE,
++};
++
++static const struct qca_baldur_hs_data usb2_hs_data = {
++	.usb3_hs_phy = 0,
++	.phy_config_offset = USB20_HS_PHY_HOST_MODE,
++};
++
++static const struct of_device_id qca_baldur_hs_id_table[] = {
++	{ .compatible = "qca,baldur-usb3-hsphy", .data = &usb3_hs_data },
++	{ .compatible = "qca,baldur-usb2-hsphy", .data = &usb2_hs_data },
++	{ /* Sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, qca_baldur_hs_id_table);
++
++static int qca_baldur_hs_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *match;
++	struct qca_baldur_hs_phy *phy;
++	int err;
++
++	match = of_match_device(qca_baldur_hs_id_table, &pdev->dev);
++	if (!match)
++		return -ENODEV;
++
++	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
++	if (!phy)
++		return -ENOMEM;
++
++	platform_set_drvdata(pdev, phy);
++	phy->dev = &pdev->dev;
++
++	phy->data = match->data;
++
++	err = qca_baldur_hs_get_resources(phy);
++	if (err < 0) {
++		dev_err(&pdev->dev, "failed to request resources: %d\n", err);
++		return err;
++	}
++
++	phy->phy.dev		= phy->dev;
++	phy->phy.label		= "qca-baldur-hsphy";
++	phy->phy.init		= qca_baldur_hs_phy_init;
++	phy->phy.shutdown	= qca_baldur_hs_phy_shutdown;
++	phy->phy.type		= USB_PHY_TYPE_USB2;
++	phy->phy.io_ops		= &qca_baldur_io_ops;
++
++	err = usb_add_phy_dev(&phy->phy);
++	return err;
++}
++
++static struct platform_driver qca_baldur_hs_driver = {
++	.probe		= qca_baldur_hs_probe,
++	.remove		= qca_baldur_hs_remove,
++	.driver		= {
++		.name	= "qca-baldur-hsphy",
++		.owner	= THIS_MODULE,
++		.of_match_table = qca_baldur_hs_id_table,
++	},
++};
++
++module_platform_driver(qca_baldur_hs_driver);
++
++MODULE_ALIAS("platform:qca-baldur-hsphy");
++MODULE_LICENSE("Dual BSD/GPL");
++MODULE_DESCRIPTION("USB3 QCA BALDUR HSPHY driver");
+--- /dev/null
++++ b/drivers/usb/phy/phy-qca-uniphy.c
+@@ -0,0 +1,171 @@
++/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/regulator/consumer.h>
++#include <linux/usb/phy.h>
++#include <linux/reset.h>
++#include <linux/of_device.h>
++
++struct qca_uni_ss_phy {
++	struct usb_phy phy;
++	struct device *dev;
++
++	void __iomem *base;
++
++	struct reset_control *por_rst;
++
++	unsigned int host;
++};
++
++#define	phy_to_dw_phy(x)	container_of((x), struct qca_uni_ss_phy, phy)
++
++/**
++ * Write register
++ *
++ * @base - PHY base virtual address.
++ * @offset - register offset.
++ */
++static u32 qca_uni_ss_read(void __iomem *base, u32 offset)
++{
++	u32 value;
++	value = readl_relaxed(base + offset);
++	return value;
++}
++
++/**
++ * Write register
++ *
++ * @base - PHY base virtual address.
++ * @offset - register offset.
++ * @val - value to write.
++ */
++static void qca_uni_ss_write(void __iomem *base, u32 offset, u32 val)
++{
++	writel(val, base + offset);
++	udelay(100);
++}
++
++static void qca_uni_ss_phy_shutdown(struct usb_phy *x)
++{
++	struct qca_uni_ss_phy *phy = phy_to_dw_phy(x);
++
++	/* assert SS PHY POR reset */
++	reset_control_assert(phy->por_rst);
++}
++
++static int qca_uni_ss_phy_init(struct usb_phy *x)
++{
++	struct qca_uni_ss_phy *phy = phy_to_dw_phy(x);
++
++	/* assert SS PHY POR reset */
++	reset_control_assert(phy->por_rst);
++
++	msleep(10);
++
++	msleep(10);
++
++	/* deassert SS PHY POR reset */
++	reset_control_deassert(phy->por_rst);
++
++	return 0;
++}
++
++static int qca_uni_ss_get_resources(struct platform_device *pdev,
++		struct qca_uni_ss_phy *phy)
++{
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	phy->base = devm_ioremap_resource(phy->dev, res);
++	if (IS_ERR(phy->base))
++		return PTR_ERR(phy->base);
++
++	phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
++	if (IS_ERR(phy->por_rst))
++		return PTR_ERR(phy->por_rst);
++
++	return 0;
++}
++
++static int qca_uni_ss_remove(struct platform_device *pdev)
++{
++	struct qca_uni_ss_phy *phy = platform_get_drvdata(pdev);
++
++	usb_remove_phy(&phy->phy);
++	return 0;
++}
++
++static const struct of_device_id qca_uni_ss_id_table[] = {
++	{ .compatible = "qca,uni-ssphy" },
++	{ /* Sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, qca_uni_ss_id_table);
++
++static int qca_uni_ss_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *match;
++	struct device_node *np = pdev->dev.of_node;
++	struct qca_uni_ss_phy  *phy;
++	int ret;
++
++	match = of_match_device(qca_uni_ss_id_table, &pdev->dev);
++	if (!match)
++		return -ENODEV;
++
++	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
++	if (!phy)
++		return -ENOMEM;
++
++	platform_set_drvdata(pdev, phy);
++	phy->dev = &pdev->dev;
++
++	ret = qca_uni_ss_get_resources(pdev, phy);
++	if (ret < 0) {
++		dev_err(&pdev->dev, "failed to request resources: %d\n", ret);
++		return ret;
++	}
++
++	phy->phy.dev        = phy->dev;
++	phy->phy.label      = "qca-uni-ssphy";
++	phy->phy.init       = qca_uni_ss_phy_init;
++	phy->phy.shutdown   = qca_uni_ss_phy_shutdown;
++	phy->phy.type       = USB_PHY_TYPE_USB3;
++
++	ret = usb_add_phy_dev(&phy->phy);
++	return ret;
++}
++
++static struct platform_driver qca_uni_ss_driver = {
++	.probe		= qca_uni_ss_probe,
++	.remove		= qca_uni_ss_remove,
++	.driver		= {
++		.name	= "qca-uni-ssphy",
++		.owner	= THIS_MODULE,
++		.of_match_table = qca_uni_ss_id_table,
++	},
++};
++
++module_platform_driver(qca_uni_ss_driver);
++
++MODULE_ALIAS("platform:qca-uni-ssphy");
++MODULE_LICENSE("Dual BSD/GPL");
++MODULE_DESCRIPTION("USB3 QCA UNI SSPHY driver");