1 files changed, 0 insertions, 129 deletions
diff --git a/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch
deleted file mode 100644
index fa78a0aeda..0000000000
--- a/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 16d2871830ff3fe12a6bff582549a9264adff278 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangi@codeaurora.org>
-Date: Tue, 10 May 2016 20:19:31 +0530
-Subject: [PATCH] spi: qup: Fix fifo and dma support for IPQ806x
-
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/spi/spi-qup.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 52 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -24,6 +24,7 @@
- #include <linux/spi/spi.h>
- #include <linux/dmaengine.h>
- #include <linux/dma-mapping.h>
-+#include <linux/gpio.h>
- 
- #define QUP_CONFIG			0x0000
- #define QUP_STATE			0x0004
-@@ -152,6 +153,7 @@ struct spi_qup {
- 	int			use_dma;
- 	struct dma_slave_config	rx_conf;
- 	struct dma_slave_config	tx_conf;
-+	int mode;
- };
- 
- 
-@@ -370,7 +372,8 @@ static int spi_qup_do_pio(struct spi_mas
- 		return ret;
- 	}
- 
--	spi_qup_fifo_write(qup, xfer);
-+	if (qup->mode == QUP_IO_M_MODE_FIFO)
-+		spi_qup_fifo_write(qup, xfer);
- 
- 	return 0;
- }
-@@ -448,6 +451,7 @@ spi_qup_get_mode(struct spi_master *mast
- {
- 	struct spi_qup *qup = spi_master_get_devdata(master);
- 	u32 mode;
-+	size_t dma_align = dma_get_cache_alignment();
- 
- 	qup->w_size = 4;
- 
-@@ -458,6 +462,14 @@ spi_qup_get_mode(struct spi_master *mast
- 
- 	qup->n_words = xfer->len / qup->w_size;
- 
-+	if (!IS_ERR_OR_NULL(master->dma_rx) &&
-+			IS_ALIGNED((size_t)xfer->tx_buf, dma_align) &&
-+			IS_ALIGNED((size_t)xfer->rx_buf, dma_align) &&
-+			!is_vmalloc_addr(xfer->tx_buf) &&
-+			!is_vmalloc_addr(xfer->rx_buf) &&
-+			(xfer->len > 3*qup->in_blk_sz))
-+		qup->use_dma = 1;
-+
- 	if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
- 		mode = QUP_IO_M_MODE_FIFO;
- 	else
-@@ -491,7 +503,7 @@ static int spi_qup_io_config(struct spi_
- 		return -EIO;
- 	}
- 
--	mode = spi_qup_get_mode(spi->master, xfer);
-+	controller->mode = mode = spi_qup_get_mode(spi->master, xfer);
- 	n_words = controller->n_words;
- 
- 	if (mode == QUP_IO_M_MODE_FIFO) {
-@@ -500,6 +512,7 @@ static int spi_qup_io_config(struct spi_
- 		/* must be zero for FIFO */
- 		writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
- 		writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
-+		controller->use_dma = 0;
- 	} else if (!controller->use_dma) {
- 		writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
- 		writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
-@@ -750,6 +763,38 @@ err_tx:
- 	return ret;
- }
- 
-+static void spi_qup_set_cs(struct spi_device *spi, bool val)
-+{
-+	struct spi_qup *controller;
-+	u32 spi_ioc;
-+	u32 spi_ioc_orig;
-+
-+	controller = spi_master_get_devdata(spi->master);
-+	spi_ioc = readl_relaxed(controller->base + SPI_IO_CONTROL);
-+	spi_ioc_orig = spi_ioc;
-+	if (!val)
-+		spi_ioc |= SPI_IO_C_FORCE_CS;
-+	else
-+		spi_ioc &= ~SPI_IO_C_FORCE_CS;
-+
-+	if (spi_ioc != spi_ioc_orig)
-+		writel_relaxed(spi_ioc, controller->base + SPI_IO_CONTROL);
-+}
-+
-+static int spi_qup_setup(struct spi_device *spi)
-+{
-+	if (spi->cs_gpio >= 0) {
-+		if (spi->mode & SPI_CS_HIGH)
-+			gpio_set_value(spi->cs_gpio, 0);
-+		else
-+			gpio_set_value(spi->cs_gpio, 1);
-+
-+		udelay(10);
-+	}
-+
-+	return 0;
-+}
-+
- static int spi_qup_probe(struct platform_device *pdev)
- {
- 	struct spi_master *master;
-@@ -846,6 +891,11 @@ static int spi_qup_probe(struct platform
- 	if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
- 		controller->qup_v1 = 1;
- 
-+	if (!controller->qup_v1)
-+		master->set_cs = spi_qup_set_cs;
-+	else
-+		master->setup = spi_qup_setup;
-+
- 	spin_lock_init(&controller->lock);
- 	init_completion(&controller->done);
-