1 files changed, 0 insertions, 160 deletions
diff --git a/target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch
deleted file mode 100644
index 0845d3f213..0000000000
--- a/target/linux/ipq806x/patches-4.4/022-add-db149-dts.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From f26cc3733bdd697bd81ae505fc133fa7c9b6ea19 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Tue, 7 Apr 2015 19:58:58 -0700
-Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
-
-Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
-SATA, USB2, USB3 and NOR flash.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/Makefile               |   1 +
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 132 +++++++++++++++++++++++++++++++
- 2 files changed, 133 insertions(+)
- create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -506,6 +506,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- 	qcom-apq8084-ifc6540.dtb \
- 	qcom-apq8084-mtp.dtb \
- 	qcom-ipq8064-ap148.dtb \
-+	qcom-ipq8064-db149.dtb \
- 	qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
- 	qcom-msm8974-sony-xperia-honami.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -0,0 +1,132 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+/ {
-+	model = "Qualcomm IPQ8064/DB149";
-+	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-+
-+	reserved-memory {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges;
-+		rsvd@41200000 {
-+			reg = <0x41200000 0x300000>;
-+			no-map;
-+		};
-+	};
-+
-+	alias {
-+		serial0 = &uart2;
-+	};
-+
-+	chosen {
-+		linux,stdout-path = "serial0:115200n8";
-+	};
-+
-+	soc {
-+		pinmux@800000 {
-+			i2c4_pins: i2c4_pinmux {
-+				pins = "gpio12", "gpio13";
-+				function = "gsbi4";
-+				bias-disable;
-+			};
-+
-+			spi_pins: spi_pins {
-+				mux {
-+					pins = "gpio18", "gpio19", "gpio21";
-+					function = "gsbi5";
-+					drive-strength = <10>;
-+					bias-none;
-+				};
-+			};
-+		};
-+
-+		gsbi2: gsbi@12480000 {
-+			qcom,mode = <GSBI_PROT_I2C_UART>;
-+			status = "ok";
-+			uart2: serial@12490000 {
-+				status = "ok";
-+			};
-+		};
-+
-+		gsbi5: gsbi@1a200000 {
-+			qcom,mode = <GSBI_PROT_SPI>;
-+			status = "ok";
-+
-+			spi4: spi@1a280000 {
-+				status = "ok";
-+				spi-max-frequency = <50000000>;
-+
-+				pinctrl-0 = <&spi_pins>;
-+				pinctrl-names = "default";
-+
-+				cs-gpios = <&qcom_pinmux 20 0>;
-+
-+				flash: m25p80@0 {
-+					compatible = "s25fl256s1";
-+					#address-cells = <1>;
-+					#size-cells = <1>;
-+					spi-max-frequency = <50000000>;
-+					reg = <0>;
-+					m25p,fast-read;
-+
-+					partition@0 {
-+						label = "lowlevel_init";
-+						reg = <0x0 0x1b0000>;
-+					};
-+
-+					partition@1 {
-+						label = "u-boot";
-+						reg = <0x1b0000 0x80000>;
-+					};
-+
-+					partition@2 {
-+						label = "u-boot-env";
-+						reg = <0x230000 0x40000>;
-+					};
-+
-+					partition@3 {
-+						label = "caldata";
-+						reg = <0x270000 0x40000>;
-+					};
-+
-+					partition@4 {
-+						label = "firmware";
-+						reg = <0x2b0000 0x1d50000>;
-+					};
-+				};
-+			};
-+		};
-+
-+		sata-phy@1b400000 {
-+			status = "ok";
-+		};
-+
-+		sata@29000000 {
-+			status = "ok";
-+		};
-+
-+		phy@100f8800 {		/* USB3 port 1 HS phy */
-+			status = "ok";
-+		};
-+
-+		phy@100f8830 {		/* USB3 port 1 SS phy */
-+			status = "ok";
-+		};
-+
-+		phy@110f8800 {		/* USB3 port 0 HS phy */
-+			status = "ok";
-+		};
-+
-+		phy@110f8830 {		/* USB3 port 0 SS phy */
-+			status = "ok";
-+		};
-+
-+		usb30@0 {
-+			status = "ok";
-+		};
-+
-+		usb30@1 {
-+			status = "ok";
-+		};
-+	};
-+};