aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch')
-rw-r--r--target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch616
1 files changed, 0 insertions, 616 deletions
diff --git a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
deleted file mode 100644
index e430329acd..0000000000
--- a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
+++ /dev/null
@@ -1,616 +0,0 @@
-From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Thu, 9 Mar 2017 08:19:18 +0100
-Subject: [PATCH 32/69] phy: add qcom dwc3 phy
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- drivers/phy/Kconfig | 12 +
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 588 insertions(+)
- create mode 100644 drivers/phy/phy-qcom-dwc3.c
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-+
-+config PHY_QCOM_DWC3
-+ tristate "QCOM DWC3 USB PHY support"
-+ depends on ARCH_QCOM
-+ depends on HAS_IOMEM
-+ depends on OF
-+ select GENERIC_PHY
-+ help
-+ This option enables support for the Synopsis PHYs present inside the
-+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS
-+ PHY controllers.
-+
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
- obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
- obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
- obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
-+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
-@@ -0,0 +1,575 @@
-+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+* GNU General Public License for more details.
-+*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define QSCRATCH_GENERAL_CFG (0x08)
-+#define HSUSB_PHY_CTRL_REG (0x10)
-+
-+/* PHY_CTRL_REG */
-+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
-+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
-+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
-+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
-+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
-+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
-+#define HSUSB_CTRL_COMMONONN BIT(11)
-+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
-+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
-+#define HSUSB_CTRL_CLAMP_EN BIT(7)
-+#define HSUSB_CTRL_RETENABLEN BIT(1)
-+#define HSUSB_CTRL_POR BIT(0)
-+
-+/* QSCRATCH_GENERAL_CFG */
-+#define HSUSB_GCFG_XHCI_REV BIT(2)
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define SSUSB_PHY_CTRL_REG (0x00)
-+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
-+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
-+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
-+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
-+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
-+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
-+#define CR_PROTOCOL_READ_REG (0x1c)
-+#define CR_PROTOCOL_WRITE_REG (0x20)
-+
-+/* PHY_CTRL_REG */
-+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
-+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
-+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
-+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
-+
-+/* SSPHY control registers */
-+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane)
-+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane)
-+
-+/* SSPHY SoC version specific values */
-+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
-+#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit
-+ preemphasis */
-+#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */
-+
-+/* QSCRATCH PHY_PARAM_CTRL1 fields */
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u
-+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u
-+
-+#define PHY_PARAM_CTRL1_MASK \
-+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
-+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
-+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
-+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
-+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
-+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
-+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+/* RX OVRD IN HI bits */
-+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
-+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
-+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
-+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700
-+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8
-+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
-+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018
-+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
-+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003
-+
-+/* TX OVRD DRV LO register bits */
-+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F
-+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80
-+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7
-+#define TX_OVRD_DRV_LO_EN BIT(14)
-+
-+/* SS CAP register bits */
-+#define SS_CR_CAP_ADDR_REG BIT(0)
-+#define SS_CR_CAP_DATA_REG BIT(0)
-+#define SS_CR_READ_REG BIT(0)
-+#define SS_CR_WRITE_REG BIT(0)
-+
-+struct qcom_dwc3_usb_phy {
-+ void __iomem *base;
-+ struct device *dev;
-+ struct clk *xo_clk;
-+ struct clk *ref_clk;
-+ u32 rx_eq;
-+ u32 tx_deamp_3_5db;
-+ u32 mpll;
-+};
-+
-+struct qcom_dwc3_phy_drvdata {
-+ struct phy_ops ops;
-+ u32 clk_rate;
-+};
-+
-+/**
-+ * Write register and read back masked value to confirm it is written
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @offset - register offset.
-+ * @mask - register bitmask specifying what should be updated
-+ * @val - value to write.
-+ */
-+static inline void qcom_dwc3_phy_write_readback(
-+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
-+ const u32 mask, u32 val)
-+{
-+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
-+
-+ tmp &= ~mask; /* retain other bits */
-+ write_val = tmp | val;
-+
-+ writel(write_val, phy_dwc3->base + offset);
-+
-+ /* Read back to see if val was written */
-+ tmp = readl(phy_dwc3->base + offset);
-+ tmp &= mask; /* clear other bits */
-+
-+ if (tmp != val)
-+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
-+ val, offset);
-+}
-+
-+static int wait_for_latch(void __iomem *addr)
-+{
-+ u32 retry = 10;
-+
-+ while (true) {
-+ if (!readl(addr))
-+ break;
-+
-+ if (--retry == 0)
-+ return -ETIMEDOUT;
-+
-+ usleep_range(10, 20);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Write SSPHY register
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to write.
-+ * @val - value to write.
-+ */
-+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
-+ u32 addr, u32 val)
-+{
-+ int ret;
-+
-+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+err_wait:
-+ if (ret)
-+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
-+ return ret;
-+}
-+
-+/**
-+ * Read SSPHY register.
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to read.
-+ */
-+static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
-+{
-+ int ret;
-+
-+ writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /*
-+ * Due to hardware bug, first read of SSPHY register might be
-+ * incorrect. Hence as workaround, SW should perform SSPHY register
-+ * read twice, but use only second read and ignore first read.
-+ */
-+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /* throwaway read */
-+ readl(base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+err_wait:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_hs_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 val;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /*
-+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
-+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
-+ */
-+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
-+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
-+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
-+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
-+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
-+
-+ /* use core clock if external reference is not present */
-+ if (!phy_dwc3->xo_clk)
-+ val |= HSUSB_CTRL_USE_CLKCORE;
-+
-+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+
-+ /* Disable (bypass) VBUS and ID filters */
-+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_hs_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_ss_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 data = 0;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /* reset phy */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
-+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* clear REF_PAD if we don't have XO clk */
-+ if (!phy_dwc3->xo_clk)
-+ data &= ~SSUSB_CTRL_REF_USE_PAD;
-+ else
-+ data |= SSUSB_CTRL_REF_USE_PAD;
-+
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* wait for ref clk to become stable, this can take up to 30ms */
-+ msleep(30);
-+
-+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /*
-+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
-+ * in HS mode instead of SS mode. Workaround it by asserting
-+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data |= (1 << 7);
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~0xff0;
-+ data |= 0x20;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Fix RX Equalization setting as follows
-+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
-+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
-+ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
-+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Set EQ and TX launch amplitudes as follows
-+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
-+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
-+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
-+ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
-+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
-+ data |= 0x6E;
-+ data |= TX_OVRD_DRV_LO_EN;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
-+
-+ /*
-+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
-+ * TX_FULL_SWING [26:20] amplitude to 110
-+ * TX_DEEMPH_6DB [19:14] to 32
-+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
-+ * LOS_BIAS [7:3] to 9
-+ */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
-+
-+ data &= ~PHY_PARAM_CTRL1_MASK;
-+
-+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
-+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
-+
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
-+ PHY_PARAM_CTRL1_MASK, data);
-+
-+err_phy_trans:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ /* Sequence to put SSPHY in low power state:
-+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
-+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
-+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
-+ */
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_SS_PHY_EN, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_REF_USE_PAD, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_hs_phy_init,
-+ .exit = qcom_dwc3_hs_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 60000000,
-+};
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_ss_phy_init,
-+ .exit = qcom_dwc3_ss_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 125000000,
-+};
-+
-+static const struct of_device_id qcom_dwc3_phy_table[] = {
-+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
-+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
-+
-+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3;
-+ struct phy_provider *phy_provider;
-+ struct phy *generic_phy;
-+ struct resource *res;
-+ const struct of_device_id *match;
-+ const struct qcom_dwc3_phy_drvdata *data;
-+ struct device_node *np;
-+
-+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
-+ if (!phy_dwc3)
-+ return -ENOMEM;
-+
-+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
-+ data = match->data;
-+
-+ phy_dwc3->dev = &pdev->dev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
-+ if (IS_ERR(phy_dwc3->base))
-+ return PTR_ERR(phy_dwc3->base);
-+
-+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
-+ if (IS_ERR(phy_dwc3->ref_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
-+ return PTR_ERR(phy_dwc3->ref_clk);
-+ }
-+
-+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
-+
-+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
-+ if (IS_ERR(phy_dwc3->xo_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
-+ phy_dwc3->xo_clk = NULL;
-+ }
-+
-+ /* Parse device node to probe HSIO settings */
-+ np = of_node_get(pdev->dev.of_node);
-+ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
-+ strlen(match->compatible))) {
-+
-+ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
-+ of_property_read_u32(np, "tx_deamp_3_5db",
-+ &phy_dwc3->tx_deamp_3_5db) ||
-+ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
-+
-+ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
-+
-+ /* Default HSIO settings */
-+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
-+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
-+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
-+ }
-+ }
-+
-+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
-+ &data->ops);
-+
-+ if (IS_ERR(generic_phy))
-+ return PTR_ERR(generic_phy);
-+
-+ phy_set_drvdata(generic_phy, phy_dwc3);
-+ platform_set_drvdata(pdev, phy_dwc3);
-+
-+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
-+ of_phy_simple_xlate);
-+
-+ if (IS_ERR(phy_provider))
-+ return PTR_ERR(phy_provider);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver qcom_dwc3_phy_driver = {
-+ .probe = qcom_dwc3_phy_probe,
-+ .driver = {
-+ .name = "qcom-dwc3-usb-phy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qcom_dwc3_phy_table,
-+ },
-+};
-+
-+module_platform_driver(qcom_dwc3_phy_driver);
-+
-+MODULE_ALIAS("platform:phy-qcom-dwc3");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
-+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");