aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch')
-rw-r--r--target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch71
1 files changed, 71 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
new file mode 100644
index 0000000000..da962c7130
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
@@ -0,0 +1,71 @@
+From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
+From: Thomas Pedersen <twp@codeaurora.org>
+Date: Mon, 16 May 2016 17:58:50 -0700
+Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
+
+Original patch from Andy Gross.
+
+This patch removes the crci information from the dma
+channel property. At least one client device requires
+using more than one CRCI value for a channel. This does
+not match the current binding and the crci information
+needs to be removed.
+
+Instead, the client device will provide this information
+via other means.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
+---
+ Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
+ 1 file changed, 6 insertions(+), 10 deletions(-)
+
+--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
++++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
+@@ -4,8 +4,7 @@ Required properties:
+ - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
+ - reg: Address range for DMA registers
+ - interrupts: Should contain one interrupt shared by all channels
+-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
+- denotes CRCI (client rate control interface) flow control assignment.
++- #dma-cells: must be <1>. First cell denotes the channel number.
+ - clocks: Should contain the core clock and interface clock.
+ - clock-names: Must contain "core" for the core clock and "iface" for the
+ interface clock.
+@@ -22,7 +21,7 @@ Example:
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+- #dma-cells = <2>;
++ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+@@ -35,15 +34,12 @@ Example:
+ qcom,ee = <0>;
+ };
+
+-DMA clients must use the format descripted in the dma.txt file, using a three
++DMA clients must use the format descripted in the dma.txt file, using a two
+ cell specifier for each channel.
+
+-Each dmas request consists of 3 cells:
++Each dmas request consists of two cells:
+ 1. phandle pointing to the DMA controller
+ 2. channel number
+- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
+- The CRCI is used for flow control. It identifies the peripheral device that
+- is the source/destination for the transferred data.
+
+ Example:
+
+@@ -55,7 +51,7 @@ Example:
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+- dmas = <&adm_dma 6 9>,
+- <&adm_dma 5 10>;
++ dmas = <&adm_dma 6>,
++ <&adm_dma 5>;
+ dma-names = "rx", "tx";
+ };