diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch new file mode 100644 index 0000000000..7d8c8e8a81 --- /dev/null +++ b/target/linux/ipq806x/patches-4.1/022-add-db149-dts.patch @@ -0,0 +1,160 @@ +From f26cc3733bdd697bd81ae505fc133fa7c9b6ea19 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Tue, 7 Apr 2015 19:58:58 -0700 +Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree + +Add basic DB149 (IPQ806x based platform) device-tree. It supports UART, +SATA, USB2, USB3 and NOR flash. + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/qcom-ipq8064-db149.dts | 132 +++++++++++++++++++++++++++++++ + 2 files changed, 133 insertions(+) + create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -451,6 +451,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8084-ifc6540.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-db149.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts +@@ -0,0 +1,132 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++ ++/ { ++ model = "Qualcomm IPQ8064/DB149"; ++ compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ alias { ++ serial0 = &uart2; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ spi_pins: spi_pins { ++ mux { ++ pins = "gpio18", "gpio19", "gpio21"; ++ function = "gsbi5"; ++ drive-strength = <10>; ++ bias-none; ++ }; ++ }; ++ }; ++ ++ gsbi2: gsbi@12480000 { ++ qcom,mode = <GSBI_PROT_I2C_UART>; ++ status = "ok"; ++ uart2: serial@12490000 { ++ status = "ok"; ++ }; ++ }; ++ ++ gsbi5: gsbi@1a200000 { ++ qcom,mode = <GSBI_PROT_SPI>; ++ status = "ok"; ++ ++ spi4: spi@1a280000 { ++ status = "ok"; ++ spi-max-frequency = <50000000>; ++ ++ pinctrl-0 = <&spi_pins>; ++ pinctrl-names = "default"; ++ ++ cs-gpios = <&qcom_pinmux 20 0>; ++ ++ flash: m25p80@0 { ++ compatible = "s25fl256s1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ m25p,fast-read; ++ ++ partition@0 { ++ label = "lowlevel_init"; ++ reg = <0x0 0x1b0000>; ++ }; ++ ++ partition@1 { ++ label = "u-boot"; ++ reg = <0x1b0000 0x80000>; ++ }; ++ ++ partition@2 { ++ label = "u-boot-env"; ++ reg = <0x230000 0x40000>; ++ }; ++ ++ partition@3 { ++ label = "caldata"; ++ reg = <0x270000 0x40000>; ++ }; ++ ++ partition@4 { ++ label = "firmware"; ++ reg = <0x2b0000 0x1d50000>; ++ }; ++ }; ++ }; ++ }; ++ ++ sata-phy@1b400000 { ++ status = "ok"; ++ }; ++ ++ sata@29000000 { ++ status = "ok"; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ }; ++}; |