aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch')
-rw-r--r--target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch407
1 files changed, 407 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch b/target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch
new file mode 100644
index 0000000000..fecc958dc8
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.0/704-stmmac-add-ipq806x-glue-layer.patch
@@ -0,0 +1,407 @@
+From 69fb970ad3fe05af7cb99ea78230c69c7ca0d03b Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Fri, 8 May 2015 16:10:22 -0700
+Subject: [PATCH 4/8] stmmac: add ipq806x glue layer
+
+The ethernet controller available in IPQ806x is a Synopsys DesignWare
+Gigabit MAC IP core, already supported by the stmmac driver.
+
+This glue layer implements some platform specific settings required to
+get the controller working on an IPQ806x based platform.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
+ drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
+ drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c | 324 +++++++++++++++++++++
+ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
+ .../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 +
+ 5 files changed, 328 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c
+
+--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
++++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
+@@ -16,6 +16,7 @@ if STMMAC_ETH
+ config STMMAC_PLATFORM
+ tristate "STMMAC Platform bus support"
+ depends on STMMAC_ETH
++ select MFD_SYSCON
+ default y
+ ---help---
+ This selects the platform specific bus support for the stmmac driver.
+--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
++++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
+@@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethto
+
+ obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
+ stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \
+- dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
++ dwmac-sti.o dwmac-socfpga.o dwmac-rk.o dwmac-ipq806x.o
+
+ obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
+ stmmac-pci-objs:= stmmac_pci.o
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+@@ -42,6 +42,7 @@ static const struct of_device_id stmmac_
+ { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
+ { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
+ { .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
++ { .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data },
+ { .compatible = "st,spear600-gmac"},
+ { .compatible = "snps,dwmac-3.610"},
+ { .compatible = "snps,dwmac-3.70a"},
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+@@ -25,5 +25,6 @@ extern const struct stmmac_of_data stih4
+ extern const struct stmmac_of_data stid127_dwmac_data;
+ extern const struct stmmac_of_data socfpga_gmac_data;
+ extern const struct stmmac_of_data rk3288_gmac_data;
++extern const struct stmmac_of_data ipq806x_gmac_data;
+
+ #endif /* __STMMAC_PLATFORM_H__ */
+--- /dev/null
++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+@@ -0,0 +1,343 @@
++/*
++ * Qualcomm Atheros IPQ806x GMAC glue layer
++ *
++ * Copyright (C) 2015 The Linux Foundation
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/regmap.h>
++#include <linux/clk.h>
++#include <linux/reset.h>
++#include <linux/of_net.h>
++#include <linux/mfd/syscon.h>
++#include <linux/stmmac.h>
++#include <linux/of_mdio.h>
++
++#include "stmmac_platform.h"
++
++#define NSS_COMMON_CLK_GATE 0x8
++#define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x)
++#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2))
++#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2))
++#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x)
++#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x)
++
++#define NSS_COMMON_CLK_DIV0 0xC
++#define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8)
++#define NSS_COMMON_CLK_DIV_MASK 0x7f
++
++#define NSS_COMMON_CLK_SRC_CTRL 0x14
++#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (1 << x)
++/* Mode is coded on 1 bit but is different depending on the MAC ID:
++ * MAC0: QSGMII=0 RGMII=1
++ * MAC1: QSGMII=0 SGMII=0 RGMII=1
++ * MAC2 & MAC3: QSGMII=0 SGMII=1
++ */
++#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1
++#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0)
++
++#define NSS_COMMON_MACSEC_CTL 0x28
++#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x) (1 << x)
++
++#define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4))
++#define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19)
++#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16)
++#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8
++#define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0
++#define NSS_COMMON_GMAC_CTL_IFG_MASK 0x3f
++
++#define NSS_COMMON_CLK_DIV_RGMII_1000 1
++#define NSS_COMMON_CLK_DIV_RGMII_100 9
++#define NSS_COMMON_CLK_DIV_RGMII_10 99
++#define NSS_COMMON_CLK_DIV_SGMII_1000 0
++#define NSS_COMMON_CLK_DIV_SGMII_100 4
++#define NSS_COMMON_CLK_DIV_SGMII_10 49
++
++#define QSGMII_PCS_MODE_CTL 0x68
++#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x) BIT((x * 8) + 7)
++
++#define QSGMII_PCS_CAL_LCKDT_CTL 0x120
++#define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19)
++
++/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
++#define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \
++ (0x13c + (4 * (x - 2))))
++#define QSGMII_PHY_CDR_EN BIT(0)
++#define QSGMII_PHY_RX_FRONT_EN BIT(1)
++#define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2)
++#define QSGMII_PHY_TX_DRIVER_EN BIT(3)
++#define QSGMII_PHY_QSGMII_EN BIT(7)
++#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET 12
++#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK 0x7
++#define QSGMII_PHY_RX_DC_BIAS_OFFSET 18
++#define QSGMII_PHY_RX_DC_BIAS_MASK 0x3
++#define QSGMII_PHY_RX_INPUT_EQU_OFFSET 20
++#define QSGMII_PHY_RX_INPUT_EQU_MASK 0x3
++#define QSGMII_PHY_CDR_PI_SLEW_OFFSET 22
++#define QSGMII_PHY_CDR_PI_SLEW_MASK 0x3
++#define QSGMII_PHY_TX_DRV_AMP_OFFSET 28
++#define QSGMII_PHY_TX_DRV_AMP_MASK 0xf
++
++struct ipq806x_gmac {
++ struct platform_device *pdev;
++ struct regmap *nss_common;
++ struct regmap *qsgmii_csr;
++ uint32_t id;
++ struct clk *core_clk;
++ phy_interface_t phy_mode;
++};
++
++static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
++{
++ struct device *dev = &gmac->pdev->dev;
++ int div;
++
++ switch (speed) {
++ case SPEED_1000:
++ div = NSS_COMMON_CLK_DIV_SGMII_1000;
++ break;
++
++ case SPEED_100:
++ div = NSS_COMMON_CLK_DIV_SGMII_100;
++ break;
++
++ case SPEED_10:
++ div = NSS_COMMON_CLK_DIV_SGMII_10;
++ break;
++
++ default:
++ dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
++ return -EINVAL;
++ }
++
++ return div;
++}
++
++static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
++{
++ struct device *dev = &gmac->pdev->dev;
++ int div;
++
++ switch (speed) {
++ case SPEED_1000:
++ div = NSS_COMMON_CLK_DIV_RGMII_1000;
++ break;
++
++ case SPEED_100:
++ div = NSS_COMMON_CLK_DIV_RGMII_100;
++ break;
++
++ case SPEED_10:
++ div = NSS_COMMON_CLK_DIV_RGMII_10;
++ break;
++
++ default:
++ dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
++ return -EINVAL;
++ }
++
++ return div;
++}
++
++static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
++{
++ uint32_t clk_bits, val;
++ int div;
++
++ switch (gmac->phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ div = get_clk_div_rgmii(gmac, speed);
++ clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
++ NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
++ break;
++
++ case PHY_INTERFACE_MODE_SGMII:
++ div = get_clk_div_sgmii(gmac, speed);
++ clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
++ NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
++ break;
++
++ default:
++ dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
++ phy_modes(gmac->phy_mode));
++ return -EINVAL;
++ }
++
++ /* Disable the clocks */
++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
++ val &= ~clk_bits;
++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
++
++ /* Set the divider */
++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
++ val &= ~(NSS_COMMON_CLK_DIV_MASK
++ << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
++ val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
++
++ /* Enable the clock back */
++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
++ val |= clk_bits;
++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
++
++ return 0;
++}
++
++static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
++{
++ struct device *dev = &gmac->pdev->dev;
++
++ gmac->phy_mode = of_get_phy_mode(dev->of_node);
++ if (gmac->phy_mode < 0) {
++ dev_err(dev, "missing phy mode property\n");
++ return ERR_PTR(-EINVAL);
++ }
++
++ if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
++ dev_err(dev, "missing qcom id property\n");
++ return ERR_PTR(-EINVAL);
++ }
++
++ /* The GMACs are called 1 to 4 in the documentation, but to simplify the
++ * code and keep it consistent with the Linux convention, we'll number
++ * them from 0 to 3 here.
++ */
++ if (gmac->id < 0 || gmac->id > 3) {
++ dev_err(dev, "invalid gmac id\n");
++ return ERR_PTR(-EINVAL);
++ }
++
++ gmac->core_clk = devm_clk_get(dev, "stmmaceth");
++ if (IS_ERR(gmac->core_clk)) {
++ dev_err(dev, "missing stmmaceth clk property\n");
++ return gmac->core_clk;
++ }
++ clk_set_rate(gmac->core_clk, 266000000);
++
++ /* Setup the register map for the nss common registers */
++ gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
++ "qcom,nss-common");
++ if (IS_ERR(gmac->nss_common)) {
++ dev_err(dev, "missing nss-common node\n");
++ return gmac->nss_common;
++ }
++
++ /* Setup the register map for the qsgmii csr registers */
++ gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
++ "qcom,qsgmii-csr");
++ if (IS_ERR(gmac->qsgmii_csr)) {
++ dev_err(dev, "missing qsgmii-csr node\n");
++ return gmac->qsgmii_csr;
++ }
++
++ return NULL;
++}
++
++static void *ipq806x_gmac_setup(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct ipq806x_gmac *gmac;
++ int val;
++ void *err;
++
++ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
++ if (!gmac)
++ return ERR_PTR(-ENOMEM);
++
++ gmac->pdev = pdev;
++
++ err = ipq806x_gmac_of_parse(gmac);
++ if (err) {
++ dev_err(dev, "device tree parsing error\n");
++ return err;
++ }
++
++ regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
++ QSGMII_PCS_CAL_LCKDT_CTL_RST);
++
++ /* Inter frame gap is set to 12 */
++ val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
++ 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
++ /* We also initiate an AXI low power exit request */
++ val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
++ switch (gmac->phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
++ break;
++ case PHY_INTERFACE_MODE_SGMII:
++ val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
++ break;
++ default:
++ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
++ phy_modes(gmac->phy_mode));
++ return NULL;
++ }
++ regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
++
++ /* Configure the clock src according to the mode */
++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
++ val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
++ switch (gmac->phy_mode) {
++ case PHY_INTERFACE_MODE_RGMII:
++ val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
++ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
++ break;
++ case PHY_INTERFACE_MODE_SGMII:
++ val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
++ NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
++ break;
++ default:
++ dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
++ phy_modes(gmac->phy_mode));
++ return NULL;
++ }
++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
++
++ /* Enable PTP clock */
++ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
++ val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
++ regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
++
++ if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
++ regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
++ QSGMII_PHY_CDR_EN |
++ QSGMII_PHY_RX_FRONT_EN |
++ QSGMII_PHY_RX_SIGNAL_DETECT_EN |
++ QSGMII_PHY_TX_DRIVER_EN |
++ QSGMII_PHY_QSGMII_EN |
++ 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
++ 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
++ 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
++ 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
++ 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
++ }
++
++ return gmac;
++}
++
++static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
++{
++ struct ipq806x_gmac *gmac = priv;
++
++ ipq806x_gmac_set_speed(gmac, speed);
++}
++
++const struct stmmac_of_data ipq806x_gmac_data = {
++ .has_gmac = 1,
++ .setup = ipq806x_gmac_setup,
++ .fix_mac_speed = ipq806x_gmac_fix_mac_speed,
++};