aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch')
-rw-r--r--target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch381
1 files changed, 0 insertions, 381 deletions
diff --git a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
deleted file mode 100644
index eaf037f57e..0000000000
--- a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
+++ /dev/null
@@ -1,381 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -362,6 +362,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-ipq8064-ap148.dtb \
- qcom-ipq8064-db149.dtb \
- qcom-ipq8064-r7500.dtb \
-+ qcom-ipq8064-d7800.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-msm8974-sony-xperia-honami.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
-@@ -0,0 +1,368 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Netgear Nighthawk X4 D7800";
-+ compatible = "netgear,d7800", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0xe000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ bootargs = "rootfstype=squashfs noinitrd";
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ i2c4_pins: i2c4_pinmux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ bias-disable;
-+ };
-+
-+ pcie0_pins: pcie0_pinmux {
-+ mux {
-+ pins = "gpio3";
-+ function = "pcie1_rst";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ pcie1_pins: pcie1_pinmux {
-+ mux {
-+ pins = "gpio48";
-+ function = "pcie2_rst";
-+ drive-strength = <12>;
-+ bias-disable;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ sata-phy@1b400000 {
-+ status = "ok";
-+ };
-+
-+ sata@29000000 {
-+ status = "ok";
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 3 0>;
-+ pinctrl-0 = <&pcie0_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ reset-gpio = <&qcom_pinmux 48 0>;
-+ pinctrl-0 = <&pcie1_pins>;
-+ pinctrl-names = "default";
-+ };
-+
-+ nand@1ac00000 {
-+ status = "ok";
-+
-+ pinctrl-0 = <&nand_pins>;
-+ pinctrl-names = "default";
-+
-+ nand-ecc-strength = <4>;
-+ nand-bus-width = <8>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ qcadata@0 {
-+ label = "qcadata";
-+ reg = <0x0000000 0x0c80000>;
-+ read-only;
-+ };
-+
-+ APPSBL@c80000 {
-+ label = "APPSBL";
-+ reg = <0x0c80000 0x0500000>;
-+ read-only;
-+ };
-+
-+ APPSBLENV@1180000 {
-+ label = "APPSBLENV";
-+ reg = <0x1180000 0x0080000>;
-+ read-only;
-+ };
-+
-+ art: art@1200000 {
-+ label = "art";
-+ reg = <0x1200000 0x0140000>;
-+ read-only;
-+ };
-+
-+ artbak: art@1340000 {
-+ label = "artbak";
-+ reg = <0x1340000 0x0140000>;
-+ read-only;
-+ };
-+
-+ kernel@1480000 {
-+ label = "kernel";
-+ reg = <0x1480000 0x0200000>;
-+ };
-+
-+ ubi@1680000 {
-+ label = "ubi";
-+ reg = <0x1680000 0x1E00000>;
-+ };
-+
-+ netgear@3480000 {
-+ label = "netgear";
-+ reg = <0x3480000 0x4480000>;
-+ read-only;
-+ };
-+
-+ reserve@7900000 {
-+ label = "reserve";
-+ reg = <0x7900000 0x0700000>;
-+ read-only;
-+ };
-+
-+ firmware@1480000 {
-+ label = "firmware";
-+ reg = <0x1480000 0x2000000>;
-+ };
-+
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy4>;
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&art 6>;
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&art 0>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 6 1>;
-+ linux,code = <KEY_WLAN>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 54 1>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 1>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ usb1 {
-+ label = "d7800:amber:usb1";
-+ gpios = <&qcom_pinmux 7 0>;
-+ };
-+
-+ usb3 {
-+ label = "d7800:amber:usb3";
-+ gpios = <&qcom_pinmux 8 0>;
-+ };
-+
-+ status {
-+ label = "d7800:amber:status";
-+ gpios = <&qcom_pinmux 9 0>;
-+ };
-+
-+ internet {
-+ label = "d7800:white:internet";
-+ gpios = <&qcom_pinmux 22 0>;
-+ };
-+
-+ wan {
-+ label = "d7800:white:wan";
-+ gpios = <&qcom_pinmux 23 0>;
-+ };
-+
-+ wps {
-+ label = "d7800:white:wps";
-+ gpios = <&qcom_pinmux 24 0>;
-+ };
-+
-+ esata {
-+ label = "d7800:white:esata";
-+ gpios = <&qcom_pinmux 26 0>;
-+ };
-+
-+ power {
-+ label = "d7800:white:power";
-+ gpios = <&qcom_pinmux 53 0>;
-+ default-state = "on";
-+ };
-+
-+ rfkill {
-+ label = "d7800:white:rfkill";
-+ gpios = <&qcom_pinmux 64 0>;
-+ };
-+
-+ wifi5g {
-+ label = "d7800:white:wifi5g";
-+ gpios = <&qcom_pinmux 67 0>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};