aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch')
-rw-r--r--target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch76
1 files changed, 76 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
new file mode 100644
index 0000000000..4f5c0efb7b
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
@@ -0,0 +1,76 @@
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v6,1/2] dt/bindings: qcom_adm: Fix channel specifiers
+From: Andy Gross <agross@codeaurora.org>
+X-Patchwork-Id: 6027361
+Message-Id: <1426571172-9711-2-git-send-email-agross@codeaurora.org>
+To: Vinod Koul <vinod.koul@intel.com>
+Cc: devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
+ linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
+ linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org>,
+ Bjorn Andersson <bjorn.andersson@sonymobile.com>,
+ Andy Gross <agross@codeaurora.org>
+Date: Tue, 17 Mar 2015 00:46:11 -0500
+
+This patch removes the crci information from the dma channel property. At least
+one client device requires using more than one CRCI value for a channel. This
+does not match the current binding and the crci information needs to be removed.
+
+Instead, the client device will provide this information via other means.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+
+---
+Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
+ 1 file changed, 6 insertions(+), 10 deletions(-)
+
+--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
++++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
+@@ -4,8 +4,7 @@ Required properties:
+ - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
+ - reg: Address range for DMA registers
+ - interrupts: Should contain one interrupt shared by all channels
+-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
+- denotes CRCI (client rate control interface) flow control assignment.
++- #dma-cells: must be <1>. First cell denotes the channel number.
+ - clocks: Should contain the core clock and interface clock.
+ - clock-names: Must contain "core" for the core clock and "iface" for the
+ interface clock.
+@@ -22,7 +21,7 @@ Example:
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+- #dma-cells = <2>;
++ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+@@ -35,15 +34,12 @@ Example:
+ qcom,ee = <0>;
+ };
+
+-DMA clients must use the format descripted in the dma.txt file, using a three
++DMA clients must use the format descripted in the dma.txt file, using a two
+ cell specifier for each channel.
+
+-Each dmas request consists of 3 cells:
++Each dmas request consists of two cells:
+ 1. phandle pointing to the DMA controller
+ 2. channel number
+- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
+- The CRCI is used for flow control. It identifies the peripheral device that
+- is the source/destination for the transferred data.
+
+ Example:
+
+@@ -56,7 +52,7 @@ Example:
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+- dmas = <&adm_dma 6 9>,
+- <&adm_dma 5 10>;
++ dmas = <&adm_dma 6>,
++ <&adm_dma 5>;
+ dma-names = "rx", "tx";
+ };